summaryrefslogtreecommitdiffstats
path: root/drivers/net/chelsio/vsc8244_reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/chelsio/vsc8244_reg.h')
-rw-r--r--drivers/net/chelsio/vsc8244_reg.h172
1 files changed, 172 insertions, 0 deletions
diff --git a/drivers/net/chelsio/vsc8244_reg.h b/drivers/net/chelsio/vsc8244_reg.h
new file mode 100644
index 0000000..d3c1829
--- /dev/null
+++ b/drivers/net/chelsio/vsc8244_reg.h
@@ -0,0 +1,172 @@
+/* $Date: 2005/11/23 16:28:53 $ $RCSfile: vsc8244_reg.h,v $ $Revision: 1.1 $ */
+#ifndef CHELSIO_MV8E1XXX_H
+#define CHELSIO_MV8E1XXX_H
+
+#ifndef BMCR_SPEED1000
+# define BMCR_SPEED1000 0x40
+#endif
+
+#ifndef ADVERTISE_PAUSE
+# define ADVERTISE_PAUSE 0x400
+#endif
+#ifndef ADVERTISE_PAUSE_ASYM
+# define ADVERTISE_PAUSE_ASYM 0x800
+#endif
+
+/* Gigabit MII registers */
+#define MII_GBMR 1 /* 1000Base-T mode register */
+#define MII_GBCR 9 /* 1000Base-T control register */
+#define MII_GBSR 10 /* 1000Base-T status register */
+
+/* 1000Base-T control register fields */
+#define GBCR_ADV_1000HALF 0x100
+#define GBCR_ADV_1000FULL 0x200
+#define GBCR_PREFER_MASTER 0x400
+#define GBCR_MANUAL_AS_MASTER 0x800
+#define GBCR_MANUAL_CONFIG_ENABLE 0x1000
+
+/* 1000Base-T status register fields */
+#define GBSR_LP_1000HALF 0x400
+#define GBSR_LP_1000FULL 0x800
+#define GBSR_REMOTE_OK 0x1000
+#define GBSR_LOCAL_OK 0x2000
+#define GBSR_LOCAL_MASTER 0x4000
+#define GBSR_MASTER_FAULT 0x8000
+
+/* Vitesse PHY interrupt status bits. */
+#if 0
+#define VSC8244_INTR_JABBER 0x0001
+#define VSC8244_INTR_POLARITY_CHNG 0x0002
+#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010
+#define VSC8244_INTR_DOWNSHIFT 0x0020
+#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040
+#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080
+#define VSC8244_INTR_FALSE_CARRIER 0x0100
+#define VSC8244_INTR_SYMBOL_ERROR 0x0200
+#define VSC8244_INTR_LINK_CHNG 0x0400
+#define VSC8244_INTR_AUTONEG_DONE 0x0800
+#define VSC8244_INTR_PAGE_RECV 0x1000
+#define VSC8244_INTR_DUPLEX_CHNG 0x2000
+#define VSC8244_INTR_SPEED_CHNG 0x4000
+#define VSC8244_INTR_AUTONEG_ERR 0x8000
+#else
+//#define VSC8244_INTR_JABBER 0x0001
+//#define VSC8244_INTR_POLARITY_CHNG 0x0002
+//#define VSC8244_INTR_BIT2 0x0004
+//#define VSC8244_INTR_BIT3 0x0008
+#define VSC8244_INTR_RX_ERR 0x0001
+#define VSC8244_INTR_MASTER_SLAVE 0x0002
+#define VSC8244_INTR_CABLE_IMPAIRED 0x0004
+#define VSC8244_INTR_FALSE_CARRIER 0x0008
+//#define VSC8244_INTR_ENG_DETECT_CHNG 0x0010
+//#define VSC8244_INTR_DOWNSHIFT 0x0020
+//#define VSC8244_INTR_MDI_XOVER_CHNG 0x0040
+//#define VSC8244_INTR_FIFO_OVER_UNDER 0x0080
+#define VSC8244_INTR_BIT4 0x0010
+#define VSC8244_INTR_FIFO_RX 0x0020
+#define VSC8244_INTR_FIFO_OVER_UNDER 0x0040
+#define VSC8244_INTR_LOCK_LOST 0x0080
+//#define VSC8244_INTR_FALSE_CARRIER 0x0100
+//#define VSC8244_INTR_SYMBOL_ERROR 0x0200
+//#define VSC8244_INTR_LINK_CHNG 0x0400
+//#define VSC8244_INTR_AUTONEG_DONE 0x0800
+#define VSC8244_INTR_SYMBOL_ERROR 0x0100
+#define VSC8244_INTR_ENG_DETECT_CHNG 0x0200
+#define VSC8244_INTR_AUTONEG_DONE 0x0400
+#define VSC8244_INTR_AUTONEG_ERR 0x0800
+//#define VSC8244_INTR_PAGE_RECV 0x1000
+//#define VSC8244_INTR_DUPLEX_CHNG 0x2000
+//#define VSC8244_INTR_SPEED_CHNG 0x4000
+//#define VSC8244_INTR_AUTONEG_ERR 0x8000
+#define VSC8244_INTR_DUPLEX_CHNG 0x1000
+#define VSC8244_INTR_LINK_CHNG 0x2000
+#define VSC8244_INTR_SPEED_CHNG 0x4000
+#define VSC8244_INTR_STATUS 0x8000
+#endif
+
+
+/* Vitesse PHY specific registers. */
+#define VSC8244_SPECIFIC_CNTRL_REGISTER 16
+#define VSC8244_SPECIFIC_STATUS_REGISTER 0x1c
+#define VSC8244_INTERRUPT_ENABLE_REGISTER 0x19
+#define VSC8244_INTERRUPT_STATUS_REGISTER 0x1a
+#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_REGISTER 20
+#define VSC8244_RECV_ERR_CNTR_REGISTER 21
+#define VSC8244_RES_REGISTER 22
+#define VSC8244_GLOBAL_STATUS_REGISTER 23
+#define VSC8244_LED_CONTROL_REGISTER 24
+#define VSC8244_MANUAL_LED_OVERRIDE_REGISTER 25
+#define VSC8244_EXT_PHY_SPECIFIC_CNTRL_2_REGISTER 26
+#define VSC8244_EXT_PHY_SPECIFIC_STATUS_REGISTER 27
+#define VSC8244_VIRTUAL_CABLE_TESTER_REGISTER 28
+#define VSC8244_EXTENDED_ADDR_REGISTER 29
+#define VSC8244_EXTENDED_REGISTER 30
+
+/* PHY specific control register fields */
+#define S_PSCR_MDI_XOVER_MODE 5
+#define M_PSCR_MDI_XOVER_MODE 0x3
+#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE)
+#define G_PSCR_MDI_XOVER_MODE(x) (((x) >> S_PSCR_MDI_XOVER_MODE) & M_PSCR_MDI_XOVER_MODE)
+
+/* Extended PHY specific control register fields */
+#define S_DOWNSHIFT_ENABLE 8
+#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE)
+
+#define S_DOWNSHIFT_CNT 9
+#define M_DOWNSHIFT_CNT 0x7
+#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT)
+#define G_DOWNSHIFT_CNT(x) (((x) >> S_DOWNSHIFT_CNT) & M_DOWNSHIFT_CNT)
+
+/* PHY specific status register fields */
+#define S_PSSR_JABBER 0
+#define V_PSSR_JABBER (1 << S_PSSR_JABBER)
+
+#define S_PSSR_POLARITY 1
+#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY)
+
+#define S_PSSR_RX_PAUSE 2
+#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE)
+
+#define S_PSSR_TX_PAUSE 3
+#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE)
+
+#define S_PSSR_ENERGY_DETECT 4
+#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT)
+
+#define S_PSSR_DOWNSHIFT_STATUS 5
+#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS)
+
+#define S_PSSR_MDI 6
+#define V_PSSR_MDI (1 << S_PSSR_MDI)
+
+#define S_PSSR_CABLE_LEN 7
+#define M_PSSR_CABLE_LEN 0x7
+#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN)
+#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN)
+
+//#define S_PSSR_LINK 10
+//#define S_PSSR_LINK 13
+#define S_PSSR_LINK 2
+#define V_PSSR_LINK (1 << S_PSSR_LINK)
+
+//#define S_PSSR_STATUS_RESOLVED 11
+//#define S_PSSR_STATUS_RESOLVED 10
+#define S_PSSR_STATUS_RESOLVED 15
+#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED)
+
+#define S_PSSR_PAGE_RECEIVED 12
+#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED)
+
+//#define S_PSSR_DUPLEX 13
+//#define S_PSSR_DUPLEX 12
+#define S_PSSR_DUPLEX 5
+#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX)
+
+//#define S_PSSR_SPEED 14
+//#define S_PSSR_SPEED 14
+#define S_PSSR_SPEED 3
+#define M_PSSR_SPEED 0x3
+#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED)
+#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED)
+
+#endif
OpenPOWER on IntegriCloud