summaryrefslogtreecommitdiffstats
path: root/drivers/net/cassini.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/cassini.h')
-rw-r--r--drivers/net/cassini.h766
1 files changed, 383 insertions, 383 deletions
diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h
index ab55c7e..a970804 100644
--- a/drivers/net/cassini.h
+++ b/drivers/net/cassini.h
@@ -21,7 +21,7 @@
*
* vendor id: 0x108E (Sun Microsystems, Inc.)
* device id: 0xabba (Cassini)
- * revision ids: 0x01 = Cassini
+ * revision ids: 0x01 = Cassini
* 0x02 = Cassini rev 2
* 0x10 = Cassini+
* 0x11 = Cassini+ 0.2u
@@ -46,16 +46,16 @@
* appear in cassini+. REG_MINUS_ addresses only appear in cassini.
*/
#define CAS_ID_REV2 0x02
-#define CAS_ID_REVPLUS 0x10
-#define CAS_ID_REVPLUS02u 0x11
+#define CAS_ID_REVPLUS 0x10
+#define CAS_ID_REVPLUS02u 0x11
#define CAS_ID_REVSATURNB2 0x30
/** global resources **/
/* this register sets the weights for the weighted round robin arbiter. e.g.,
* if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit
- * for its next turn to access the pci bus.
- * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8
+ * for its next turn to access the pci bus.
+ * map: 0x0 = x1, 0x1 = x2, 0x2 = x4, 0x3 = x8
* DEFAULT: 0x0, SIZE: 5 bits
*/
#define REG_CAWR 0x0004 /* core arbitration weight */
@@ -66,8 +66,8 @@
#define CAWR_RR_DIS 0x10 /* [4] */
/* if enabled, BIM can send bursts across PCI bus > cacheline size. burst
- * sizes determined by length of packet or descriptor transfer and the
- * max length allowed by the target.
+ * sizes determined by length of packet or descriptor transfer and the
+ * max length allowed by the target.
* DEFAULT: 0x0, SIZE: 1 bit
*/
#define REG_INF_BURST 0x0008 /* infinite burst enable reg */
@@ -75,21 +75,21 @@
/* top level interrupts [0-9] are auto-cleared to 0 when the status
* register is read. second level interrupts [13 - 18] are cleared at
- * the source. tx completion register 3 is replicated in [19 - 31]
+ * the source. tx completion register 3 is replicated in [19 - 31]
* DEFAULT: 0x00000000, SIZE: 29 bits
*/
#define REG_INTR_STATUS 0x000C /* interrupt status register */
-#define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set
+#define INTR_TX_INTME 0x00000001 /* frame w/ INT ME desc bit set
xferred from host queue to
TX FIFO */
#define INTR_TX_ALL 0x00000002 /* all xmit frames xferred into
TX FIFO. i.e.,
- TX Kick == TX complete. if
+ TX Kick == TX complete. if
PACED_MODE set, then TX FIFO
also empty */
-#define INTR_TX_DONE 0x00000004 /* any frame xferred into tx
+#define INTR_TX_DONE 0x00000004 /* any frame xferred into tx
FIFO */
-#define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing
+#define INTR_TX_TAG_ERROR 0x00000008 /* TX FIFO tag framing
corrupted. FATAL ERROR */
#define INTR_RX_DONE 0x00000010 /* at least 1 frame xferred
from RX FIFO to host mem.
@@ -98,18 +98,18 @@
intr blanking. */
#define INTR_RX_BUF_UNAVAIL 0x00000020 /* no more receive buffers.
RX Kick == RX complete */
-#define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing
+#define INTR_RX_TAG_ERROR 0x00000040 /* RX FIFO tag framing
corrupted. FATAL ERROR */
#define INTR_RX_COMP_FULL 0x00000080 /* no more room in completion
ring to post descriptors.
RX complete head incr to
almost reach RX complete
tail */
-#define INTR_RX_BUF_AE 0x00000100 /* less than the
+#define INTR_RX_BUF_AE 0x00000100 /* less than the
programmable threshold #
of free descr avail for
hw use */
-#define INTR_RX_COMP_AF 0x00000200 /* less than the
+#define INTR_RX_COMP_AF 0x00000200 /* less than the
programmable threshold #
of descr spaces for hw
use in completion descr
@@ -119,17 +119,17 @@
from fifo during DMA or
header parser provides TCP
header and payload size >
- MAC packet size.
+ MAC packet size.
FATAL ERROR */
#define INTR_SUMMARY 0x00001000 /* summary interrupt bit. this
- bit will be set if an interrupt
+ bit will be set if an interrupt
generated on the pci bus. useful
- when driver is polling for
+ when driver is polling for
interrupts */
#define INTR_PCS_STATUS 0x00002000 /* PCS interrupt status register */
-#define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at
+#define INTR_TX_MAC_STATUS 0x00004000 /* TX MAC status register has at
least 1 unmasked interrupt set */
-#define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at
+#define INTR_RX_MAC_STATUS 0x00008000 /* RX MAC status register has at
least 1 unmasked interrupt set */
#define INTR_MAC_CTRL_STATUS 0x00010000 /* MAC control status register has
at least 1 unmasked interrupt
@@ -137,9 +137,9 @@
#define INTR_MIF_STATUS 0x00020000 /* MIF status register has at least
1 unmasked interrupt set */
#define INTR_PCI_ERROR_STATUS 0x00040000 /* PCI error status register in the
- BIF has at least 1 unmasked
+ BIF has at least 1 unmasked
interrupt set */
-#define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion
+#define INTR_TX_COMP_3_MASK 0xFFF80000 /* mask for TX completion
3 reg data */
#define INTR_TX_COMP_3_SHIFT 19
#define INTR_ERROR_MASK (INTR_MIF_STATUS | INTR_PCI_ERROR_STATUS | \
@@ -149,7 +149,7 @@
INTR_MAC_CTRL_STATUS)
/* determines which status events will cause an interrupt. layout same
- * as REG_INTR_STATUS.
+ * as REG_INTR_STATUS.
* DEFAULT: 0xFFFFFFFF, SIZE: 16 bits
*/
#define REG_INTR_MASK 0x0010 /* Interrupt mask */
@@ -158,18 +158,18 @@
* useful when driver is polling for interrupts. layout same as REG_INTR_MASK.
* DEFAULT: 0x00000000, SIZE: 12 bits
*/
-#define REG_ALIAS_CLEAR 0x0014 /* alias clear mask
+#define REG_ALIAS_CLEAR 0x0014 /* alias clear mask
(used w/ status alias) */
/* same as REG_INTR_STATUS except that only bits cleared are those selected by
- * REG_ALIAS_CLEAR
+ * REG_ALIAS_CLEAR
* DEFAULT: 0x00000000, SIZE: 29 bits
*/
-#define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias
+#define REG_INTR_STATUS_ALIAS 0x001C /* interrupt status alias
(selective clear) */
/* DEFAULT: 0x0, SIZE: 3 bits */
#define REG_PCI_ERR_STATUS 0x1000 /* PCI error status */
-#define PCI_ERR_BADACK 0x01 /* reserved in Cassini+.
+#define PCI_ERR_BADACK 0x01 /* reserved in Cassini+.
set if no ACK64# during ABS64 cycle
in Cassini. */
#define PCI_ERR_DTRTO 0x02 /* delayed xaction timeout. set if
@@ -179,16 +179,16 @@
unused in Cassini. */
#define PCI_ERR_BIM_DMA_READ 0x10 /* BIM received 0 count DMA read req.
unused in Cassini. */
-#define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during
+#define PCI_ERR_BIM_DMA_TIMEOUT 0x20 /* BIM received 255 retries during
DMA. unused in cassini. */
/* mask for PCI status events that will set PCI_ERR_STATUS. if cleared, event
- * causes an interrupt to be generated.
+ * causes an interrupt to be generated.
* DEFAULT: 0x7, SIZE: 3 bits
*/
#define REG_PCI_ERR_STATUS_MASK 0x1004 /* PCI Error status mask */
-/* used to configure PCI related parameters that are not in PCI config space.
+/* used to configure PCI related parameters that are not in PCI config space.
* DEFAULT: 0bxx000, SIZE: 5 bits
*/
#define REG_BIM_CFG 0x1008 /* BIM Configuration */
@@ -201,7 +201,7 @@
#define BIM_CFG_RMA_INTR_ENABLE 0x040 /* master abort intr enable */
#define BIM_CFG_RTA_INTR_ENABLE 0x080 /* target abort intr enable */
#define BIM_CFG_RESERVED2 0x100 /* reserved */
-#define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global
+#define BIM_CFG_BIM_DISABLE 0x200 /* stop BIM DMA. use before global
reset. reserved in Cassini. */
#define BIM_CFG_BIM_STATUS 0x400 /* (ro) 1 = BIM DMA suspended.
reserved in Cassini. */
@@ -212,7 +212,7 @@
#define REG_BIM_DIAG 0x100C /* BIM Diagnostic */
#define BIM_DIAG_MSTR_SM_MASK 0x3FFFFF00 /* PCI master controller state
machine bits [21:0] */
-#define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state
+#define BIM_DIAG_BRST_SM_MASK 0x7F /* PCI burst controller state
machine bits [6:0] */
/* writing to SW_RESET_TX and SW_RESET_RX will issue a global
@@ -224,14 +224,14 @@
#define SW_RESET_RX 0x00000002 /* reset RX DMA engine. poll until
cleared to 0. */
#define SW_RESET_RSTOUT 0x00000004 /* force RSTOUT# pin active (low).
- resets PHY and anything else
+ resets PHY and anything else
connected to RSTOUT#. RSTOUT#
is also activated by local PCI
- reset when hot-swap is being
+ reset when hot-swap is being
done. */
-#define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with
- this bit set, PCS and SLINK
- modules won't be reset.
+#define SW_RESET_BLOCK_PCS_SLINK 0x00000008 /* if a global reset is done with
+ this bit set, PCS and SLINK
+ modules won't be reset.
i.e., link won't drop. */
#define SW_RESET_BREQ_SM_MASK 0x00007F00 /* breq state machine [6:0] */
#define SW_RESET_PCIARB_SM_MASK 0x00070000 /* pci arbitration state bits:
@@ -252,7 +252,7 @@
0b01: AD_ACK_RX
0b10: AD_ACK_TX
0b11: AD_IDL_TX */
-#define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits
+#define SW_RESET_WRPCI_SM_MASK 0x06000000 /* write pci state bits
0b00: WR_PCI_WAT
0b01: WR_PCI_RDY
0b11: WR_PCI_ACK */
@@ -268,7 +268,7 @@
* value written has both lower and upper 32-bit halves rotated to the right
* one bit position. e.g., FFFFFFFF FFFFFFFF -> 7FFFFFFF 7FFFFFFF
*/
-#define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test
+#define REG_MINUS_BIM_DATAPATH_TEST 0x1018 /* Cassini: BIM datapath test
Cassini+: reserved */
/* output enables are provided for each device's chip select and for the rest
@@ -276,12 +276,12 @@
* bits are connected to general purpus control/status bits.
* DEFAULT: 0x7
*/
-#define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device
+#define REG_BIM_LOCAL_DEV_EN 0x1020 /* BIM local device
output EN. default: 0x7 */
#define BIM_LOCAL_DEV_PAD 0x01 /* address bus, RW signal, and
OE signal output enable on the
local bus interface. these
- are shared between both local
+ are shared between both local
bus devices. tristate when 0. */
#define BIM_LOCAL_DEV_PROM 0x02 /* PROM chip select */
#define BIM_LOCAL_DEV_EXT 0x04 /* secondary local bus device chip
@@ -291,8 +291,8 @@
#define BIM_LOCAL_DEV_HW_RESET 0x20 /* internal hw reset. Cassini+ only. */
/* access 24 entry BIM read and write buffers. put address in REG_BIM_BUFFER_ADDR
- * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI.
- * _DATA_HI should be the last access of the sequence.
+ * and read/write from/to it REG_BIM_BUFFER_DATA_LOW and _DATA_HI.
+ * _DATA_HI should be the last access of the sequence.
* DEFAULT: undefined
*/
#define REG_BIM_BUFFER_ADDR 0x1024 /* BIM buffer address. for
@@ -304,10 +304,10 @@
#define REG_BIM_BUFFER_DATA_LOW 0x1028 /* BIM buffer data low */
#define REG_BIM_BUFFER_DATA_HI 0x102C /* BIM buffer data high */
-/* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer.
+/* set BIM_RAM_BIST_START to start built-in self test for BIM read buffer.
* bit auto-clears when done with status read from _SUMMARY and _PASS bits.
*/
-#define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST
+#define REG_BIM_RAM_BIST 0x102C /* BIM RAM (read buffer) BIST
control/status */
#define BIM_RAM_BIST_RD_START 0x01 /* start BIST for BIM read buffer */
#define BIM_RAM_BIST_WR_START 0x02 /* start BIST for BIM write buffer.
@@ -321,7 +321,7 @@
#define BIM_RAM_BIST_RD_LOW_PASS 0x10 /* read low bank passes BIST */
#define BIM_RAM_BIST_RD_HI_PASS 0x20 /* read high bank passes BIST */
#define BIM_RAM_BIST_WR_LOW_PASS 0x40 /* write low bank passes BIST.
- Cassini only. reserved in
+ Cassini only. reserved in
Cassini+. */
#define BIM_RAM_BIST_WR_HI_PASS 0x80 /* write high bank passes BIST.
Cassini only. reserved in
@@ -333,7 +333,7 @@
#define REG_BIM_DIAG_MUX 0x1030 /* BIM diagnostic probe mux
select register */
-/* enable probe monitoring mode and select data appearing on the P_A* bus. bit
+/* enable probe monitoring mode and select data appearing on the P_A* bus. bit
* values for _SEL_HI_MASK and _SEL_LOW_MASK:
* 0x0: internal probe[7:0] (pci arb state, wtc empty w, wtc full w, wtc empty w,
* wtc empty r, post pci)
@@ -353,7 +353,7 @@
* 0xe: hp probe[7:0] 0xf: mac probe[7:0]
*/
#define REG_PLUS_PROBE_MUX_SELECT 0x1034 /* Cassini+: PROBE MUX SELECT */
-#define PROBE_MUX_EN 0x80000000 /* allow probe signals to be
+#define PROBE_MUX_EN 0x80000000 /* allow probe signals to be
driven on local bus P_A[15:0]
for debugging */
#define PROBE_MUX_SUB_MUX_MASK 0x0000FF00 /* select sub module probe signals:
@@ -362,28 +362,28 @@
0x30 = tx[1:0]
0xC0 = hp[1:0] */
#define PROBE_MUX_SEL_HI_MASK 0x000000F0 /* select which module to appear
- on P_A[15:8]. see above for
+ on P_A[15:8]. see above for
values. */
#define PROBE_MUX_SEL_LOW_MASK 0x0000000F /* select which module to appear
- on P_A[7:0]. see above for
+ on P_A[7:0]. see above for
values. */
-/* values mean the same thing as REG_INTR_MASK excep that it's for INTB.
+/* values mean the same thing as REG_INTR_MASK excep that it's for INTB.
DEFAULT: 0x1F */
#define REG_PLUS_INTR_MASK_1 0x1038 /* Cassini+: interrupt mask
register 2 for INTB */
#define REG_PLUS_INTRN_MASK(x) (REG_PLUS_INTR_MASK_1 + ((x) - 1)*16)
-/* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to
- * all of the alternate (2-4) INTR registers while _1 corresponds to only
- * _MASK_1 and _STATUS_1 registers.
+/* bits correspond to both _MASK and _STATUS registers. _ALT corresponds to
+ * all of the alternate (2-4) INTR registers while _1 corresponds to only
+ * _MASK_1 and _STATUS_1 registers.
* DEFAULT: 0x7 for MASK registers, 0x0 for ALIAS_CLEAR registers
*/
-#define INTR_RX_DONE_ALT 0x01
+#define INTR_RX_DONE_ALT 0x01
#define INTR_RX_COMP_FULL_ALT 0x02
#define INTR_RX_COMP_AF_ALT 0x04
#define INTR_RX_BUF_UNAVAIL_1 0x08
#define INTR_RX_BUF_AE_1 0x10 /* almost empty */
-#define INTRN_MASK_RX_EN 0x80
+#define INTRN_MASK_RX_EN 0x80
#define INTRN_MASK_CLEAR_ALL (INTR_RX_DONE_ALT | \
INTR_RX_COMP_FULL_ALT | \
INTR_RX_COMP_AF_ALT | \
@@ -399,7 +399,7 @@
register 2 for INTB */
#define REG_PLUS_ALIASN_CLEAR(x) (REG_PLUS_ALIAS_CLEAR_1 + ((x) - 1)*16)
-#define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status
+#define REG_PLUS_INTR_STATUS_ALIAS_1 0x1044 /* Cassini+: interrupt status
register alias 2 for INTB */
#define REG_PLUS_INTRN_STATUS_ALIAS(x) (REG_PLUS_INTR_STATUS_ALIAS_1 + ((x) - 1)*16)
@@ -411,18 +411,18 @@
#define SATURN_PCFG_CLA 0x00000004 /* 1 = phy link100led */
#define SATURN_PCFG_LLA 0x00000008 /* 1 = phy link1000led */
#define SATURN_PCFG_RLA 0x00000010 /* 1 = phy duplexled */
-#define SATURN_PCFG_PDS 0x00000020 /* phy debug mode.
+#define SATURN_PCFG_PDS 0x00000020 /* phy debug mode.
0 = normal */
-#define SATURN_PCFG_MTP 0x00000080 /* test point select */
-#define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 =
+#define SATURN_PCFG_MTP 0x00000080 /* test point select */
+#define SATURN_PCFG_GMO 0x00000100 /* GMII observe. 1 =
GMII on SERDES pins for
monitoring. */
#define SATURN_PCFG_FSI 0x00000200 /* 1 = freeze serdes/gmii. all
pins configed as outputs.
for power saving when using
internal phy. */
-#define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl
- polarity from strapping
+#define SATURN_PCFG_LAD 0x00000800 /* 0 = mac core led ctrl
+ polarity from strapping
value.
1 = mac core led ctrl
polarity active low. */
@@ -433,26 +433,26 @@
#define MAX_TX_RINGS (1 << MAX_TX_RINGS_SHIFT)
#define MAX_TX_RINGS_MASK (MAX_TX_RINGS - 1)
-/* TX configuration.
- * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8
+/* TX configuration.
+ * descr ring sizes size = 32 * (1 << n), n < 9. e.g., 0x8 = 8k. default: 0x8
* DEFAULT: 0x3F000001
*/
#define REG_TX_CFG 0x2004 /* TX config */
#define TX_CFG_DMA_EN 0x00000001 /* enable TX DMA. if cleared, DMA
will stop after xfer of current
buffer has been completed. */
-#define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be
- accessed w/ FIFO addr
- and data registers.
- TX DMA should be
+#define TX_CFG_FIFO_PIO_SEL 0x00000002 /* TX DMA FIFO can be
+ accessed w/ FIFO addr
+ and data registers.
+ TX DMA should be
disabled. */
#define TX_CFG_DESC_RING0_MASK 0x0000003C /* # desc entries in
ring 1. */
#define TX_CFG_DESC_RING0_SHIFT 2
#define TX_CFG_DESC_RINGN_MASK(a) (TX_CFG_DESC_RING0_MASK << (a)*4)
#define TX_CFG_DESC_RINGN_SHIFT(a) (TX_CFG_DESC_RING0_SHIFT + (a)*4)
-#define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after
- TX FIFO becomes empty.
+#define TX_CFG_PACED_MODE 0x00100000 /* TX_ALL only set after
+ TX FIFO becomes empty.
if 0, TX_ALL set
if descr queue empty. */
#define TX_CFG_DMA_RDPIPE_DIS 0x01000000 /* always set to 1 */
@@ -470,26 +470,26 @@
through Q4 */
#define TX_CFG_INTR_COMPWB_DIS 0x20000000 /* disable pre-interrupt completion
writeback */
-#define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port
+#define TX_CFG_CTX_SEL_MASK 0xC0000000 /* selects tx test port
connection
- 0b00: tx mac req,
+ 0b00: tx mac req,
tx mac retry req,
tx ack and tx tag.
- 0b01: txdma rd req,
+ 0b01: txdma rd req,
txdma rd ack,
txdma rd rdy,
txdma rd type0
- 0b11: txdma wr req,
+ 0b11: txdma wr req,
txdma wr ack,
txdma wr rdy,
txdma wr xfr done. */
#define TX_CFG_CTX_SEL_SHIFT 30
-
+
/* 11-bit counters that point to next location in FIFO to be loaded/retrieved.
* used for diagnostics only.
*/
#define REG_TX_FIFO_WRITE_PTR 0x2014 /* TX FIFO write pointer */
-#define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write
+#define REG_TX_FIFO_SHADOW_WRITE_PTR 0x2018 /* TX FIFO shadow write
pointer. temp hold reg.
diagnostics only. */
#define REG_TX_FIFO_READ_PTR 0x201C /* TX FIFO read pointer */
@@ -509,7 +509,7 @@
#define TX_SM_1_CACHE_MASK 0x03C00000 /* desc. prefetch cache controller
state machine */
#define TX_SM_1_CBQ_ARB_MASK 0xF8000000 /* CBQ arbiter state machine */
-
+
#define REG_TX_SM_2 0x202C /* TX state machine reg #2 */
#define TX_SM_2_COMP_WB_MASK 0x07 /* completion writeback sm */
#define TX_SM_2_SUB_LOAD_MASK 0x38 /* sub load state machine */
@@ -521,9 +521,9 @@
#define REG_TX_DATA_PTR_LOW 0x2030 /* TX data pointer low */
#define REG_TX_DATA_PTR_HI 0x2034 /* TX data pointer high */
-/* 13 bit registers written by driver w/ descriptor value that follows
+/* 13 bit registers written by driver w/ descriptor value that follows
* last valid xmit descriptor. kick # and complete # values are used by
- * the xmit dma engine to control tx descr fetching. if > 1 valid
+ * the xmit dma engine to control tx descr fetching. if > 1 valid
* tx descr is available within the cache line being read, cassini will
* internally cache up to 4 of them. 0 on reset. _KICK = rw, _COMP = ro.
*/
@@ -532,12 +532,12 @@
#define REG_TX_COMP0 0x2048 /* TX completion reg #1 */
#define REG_TX_COMPN(x) (REG_TX_COMP0 + (x)*4)
-/* values of TX_COMPLETE_1-4 are written. each completion register
- * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment.
+/* values of TX_COMPLETE_1-4 are written. each completion register
+ * is 2bytes in size and contiguous. 8B allocation w/ 8B alignment.
* NOTE: completion reg values are only written back prior to TX_INTME and
- * TX_ALL interrupts. at all other times, the most up-to-date index values
- * should be obtained from the REG_TX_COMPLETE_# registers.
- * here's the layout:
+ * TX_ALL interrupts. at all other times, the most up-to-date index values
+ * should be obtained from the REG_TX_COMPLETE_# registers.
+ * here's the layout:
* offset from base addr completion # byte
* 0 TX_COMPLETE_1_MSB
* 1 TX_COMPLETE_1_LSB
@@ -558,7 +558,7 @@
#define TX_COMPWB_LSB_MASK 0x000000000000FF00ULL
#define TX_COMPWB_LSB_SHIFT 8
#define TX_COMPWB_NEXT(x) ((x) >> 16)
-
+
/* 53 MSB used as base address. 11 LSB assumed to be 0. TX desc pointer must
* be 2KB-aligned. */
#define REG_TX_DB0_LOW 0x2060 /* TX descriptor base low #1 */
@@ -594,11 +594,11 @@
#define REG_TX_FIFO_DATA_HI_T0 0x2114 /* TX FIFO data high t0 */
#define REG_TX_FIFO_SIZE 0x2118 /* (ro) TX FIFO size = 0x090 = 9KB */
-/* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST
+/* 9-bit register controls BIST of TX FIFO. bit set indicates that the BIST
* passed for the specified memory
*/
#define REG_TX_RAMBIST 0x211C /* TX RAMBIST control/status */
-#define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST
+#define TX_RAMBIST_STATE 0x01C0 /* progress state of RAMBIST
controller state machine */
#define TX_RAMBIST_RAM33A_PASS 0x0020 /* RAM33A passed */
#define TX_RAMBIST_RAM32A_PASS 0x0010 /* RAM32A passed */
@@ -612,33 +612,33 @@
#define MAX_RX_DESC_RINGS 2
#define MAX_RX_COMP_RINGS 4
-/* receive DMA channel configuration. default: 0x80910
+/* receive DMA channel configuration. default: 0x80910
* free ring size = (1 << n)*32 -> [32 - 8k]
- * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9
+ * completion ring size = (1 << n)*128 -> [128 - 32k], n < 9
* DEFAULT: 0x80910
*/
#define REG_RX_CFG 0x4000 /* RX config */
#define RX_CFG_DMA_EN 0x00000001 /* enable RX DMA. 0 stops
channel as soon as current
frame xfer has completed.
- driver should disable MAC
- for 200ms before disabling
+ driver should disable MAC
+ for 200ms before disabling
RX */
-#define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX
- free desc ring.
+#define RX_CFG_DESC_RING_MASK 0x0000001E /* # desc entries in RX
+ free desc ring.
def: 0x8 = 8k */
#define RX_CFG_DESC_RING_SHIFT 1
#define RX_CFG_COMP_RING_MASK 0x000001E0 /* # desc entries in RX complete
ring. def: 0x8 = 32k */
#define RX_CFG_COMP_RING_SHIFT 5
-#define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc
+#define RX_CFG_BATCH_DIS 0x00000200 /* disable receive desc
batching. def: 0x0 =
enabled */
-#define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st
- data byte of the packet
+#define RX_CFG_SWIVEL_MASK 0x00001C00 /* byte offset of the 1st
+ data byte of the packet
w/in 8 byte boundares.
- this swivels the data
- DMA'ed to header
+ this swivels the data
+ DMA'ed to header
buffers, jumbo buffers
when header split is not
requested and MTU sized
@@ -647,17 +647,17 @@
/* cassini+ only */
#define RX_CFG_DESC_RING1_MASK 0x000F0000 /* # of desc entries in
- RX free desc ring 2.
+ RX free desc ring 2.
def: 0x8 = 8k */
#define RX_CFG_DESC_RING1_SHIFT 16
-/* the page size register allows cassini chips to do the following with
+/* the page size register allows cassini chips to do the following with
* received data:
* [--------------------------------------------------------------] page
* [off][buf1][pad][off][buf2][pad][off][buf3][pad][off][buf4][pad]
* |--------------| = PAGE_SIZE_BUFFER_STRIDE
- * page = PAGE_SIZE
+ * page = PAGE_SIZE
* offset = PAGE_SIZE_MTU_OFF
* for the above example, MTU_BUFFER_COUNT = 4.
* NOTE: as is apparent, you need to ensure that the following holds:
@@ -667,20 +667,20 @@
#define REG_RX_PAGE_SIZE 0x4004 /* RX page size */
#define RX_PAGE_SIZE_MASK 0x00000003 /* size of pages pointed to
by receive descriptors.
- if jumbo buffers are
- supported the page size
+ if jumbo buffers are
+ supported the page size
should not be < 8k.
0b00 = 2k, 0b01 = 4k
0b10 = 8k, 0b11 = 16k
DEFAULT: 8k */
#define RX_PAGE_SIZE_SHIFT 0
#define RX_PAGE_SIZE_MTU_COUNT_MASK 0x00007800 /* # of MTU buffers the hw
- packs into a page.
+ packs into a page.
DEFAULT: 4 */
#define RX_PAGE_SIZE_MTU_COUNT_SHIFT 11
#define RX_PAGE_SIZE_MTU_STRIDE_MASK 0x18000000 /* # of bytes that separate
- each MTU buffer +
- offset from each
+ each MTU buffer +
+ offset from each
other.
0b00 = 1k, 0b01 = 2k
0b10 = 4k, 0b11 = 8k
@@ -688,24 +688,24 @@
#define RX_PAGE_SIZE_MTU_STRIDE_SHIFT 27
#define RX_PAGE_SIZE_MTU_OFF_MASK 0xC0000000 /* offset in each page that
hw writes the MTU buffer
- into.
- 0b00 = 0,
+ into.
+ 0b00 = 0,
0b01 = 64 bytes
0b10 = 96, 0b11 = 128
DEFAULT: 0x1 */
#define RX_PAGE_SIZE_MTU_OFF_SHIFT 30
-
-/* 11-bit counter points to next location in RX FIFO to be loaded/read.
+
+/* 11-bit counter points to next location in RX FIFO to be loaded/read.
* shadow write pointers enable retries in case of early receive aborts.
* DEFAULT: 0x0. generated on 64-bit boundaries.
*/
#define REG_RX_FIFO_WRITE_PTR 0x4008 /* RX FIFO write pointer */
#define REG_RX_FIFO_READ_PTR 0x400C /* RX FIFO read pointer */
-#define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write
+#define REG_RX_IPP_FIFO_SHADOW_WRITE_PTR 0x4010 /* RX IPP FIFO shadow write
pointer */
#define REG_RX_IPP_FIFO_SHADOW_READ_PTR 0x4014 /* RX IPP FIFO shadow read
pointer */
-#define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read
+#define REG_RX_IPP_FIFO_READ_PTR 0x400C /* RX IPP FIFO read
pointer. (8-bit counter) */
/* current state of RX DMA state engines + other info
@@ -738,7 +738,7 @@
0x2 = wait xon
0x3 = wait xon ack */
#define RX_DEBUG_DATA_STATE_MASK 0x000001E00 /* unload data state machine
- states:
+ states:
0x0 = idle data
0x1 = header begin
0x2 = xfer header
@@ -747,7 +747,7 @@
0x5 = xfer mtu
0x6 = xfer mtu ld
0x7 = jumbo begin
- 0x8 = xfer jumbo
+ 0x8 = xfer jumbo
0x9 = xfer jumbo ld
0xa = reas begin
0xb = xfer reas
@@ -776,15 +776,15 @@
* XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg
* XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes.
* PAUSE thresholds defined in terms of FIFO occupancy and may be translated
- * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames
+ * into FIFO vacancy using RX_FIFO_SIZE. setting ON will trigger XON frames
* when FIFO reaches 0. OFF threshold should not be > size of RX FIFO. max
- * value is is 0x6F.
+ * value is is 0x6F.
* DEFAULT: 0x00078
*/
#define REG_RX_PAUSE_THRESH 0x4020 /* RX pause thresholds */
#define RX_PAUSE_THRESH_QUANTUM 64
#define RX_PAUSE_THRESH_OFF_MASK 0x000001FF /* XOFF PAUSE emitted when
- RX FIFO occupancy >
+ RX FIFO occupancy >
value*64B */
#define RX_PAUSE_THRESH_OFF_SHIFT 0
#define RX_PAUSE_THRESH_ON_MASK 0x001FF000 /* XON PAUSE emitted after
@@ -797,9 +797,9 @@
#define RX_PAUSE_THRESH_ON_SHIFT 12
/* 13-bit register used to control RX desc fetching and intr generation. if 4+
- * valid RX descriptors are available, Cassini will read 4 at a time.
+ * valid RX descriptors are available, Cassini will read 4 at a time.
* writing N means that all desc up to *but* excluding N are available. N must
- * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned.
+ * be a multiple of 4 (N % 4 = 0). first desc should be cache-line aligned.
* DEFAULT: 0 on reset
*/
#define REG_RX_KICK 0x4024 /* RX kick reg */
@@ -807,16 +807,16 @@
/* 8KB aligned 64-bit pointer to the base of the RX free/completion rings.
* lower 13 bits of the low register are hard-wired to 0.
*/
-#define REG_RX_DB_LOW 0x4028 /* RX descriptor ring
+#define REG_RX_DB_LOW 0x4028 /* RX descriptor ring
base low */
#define REG_RX_DB_HI 0x402C /* RX descriptor ring
base hi */
#define REG_RX_CB_LOW 0x4030 /* RX completion ring
base low */
-#define REG_RX_CB_HI 0x4034 /* RX completion ring
+#define REG_RX_CB_HI 0x4034 /* RX completion ring
base hi */
/* 13-bit register indicate desc used by cassini for receive frames. used
- * for diagnostic purposes.
+ * for diagnostic purposes.
* DEFAULT: 0 on reset
*/
#define REG_RX_COMP 0x4038 /* (ro) RX completion */
@@ -837,9 +837,9 @@
/* values used for receive interrupt blanking. loaded each time the ISR is read
* DEFAULT: 0x00000000
*/
-#define REG_RX_BLANK 0x4044 /* RX blanking register
+#define REG_RX_BLANK 0x4044 /* RX blanking register
for ISR read */
-#define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if
+#define RX_BLANK_INTR_PKT_MASK 0x000001FF /* RX_DONE intr asserted if
this many sets of completion
writebacks (up to 2 packets)
occur since the last time
@@ -849,33 +849,33 @@
#define RX_BLANK_INTR_TIME_MASK 0x3FFFF000 /* RX_DONE interrupt asserted
if that many clocks were
counted since last time the
- ISR was read.
+ ISR was read.
each count is 512 core
clocks (125MHz). 0 = no
time blanking */
#define RX_BLANK_INTR_TIME_SHIFT 12
-/* values used for interrupt generation based on threshold values of how
+/* values used for interrupt generation based on threshold values of how
* many free desc and completion entries are available for hw use.
* DEFAULT: 0x00000000
*/
-#define REG_RX_AE_THRESH 0x4048 /* RX almost empty
+#define REG_RX_AE_THRESH 0x4048 /* RX almost empty
thresholds */
-#define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be
+#define RX_AE_THRESH_FREE_MASK 0x00001FFF /* RX_BUF_AE will be
generated if # desc
- avail for hw use <=
+ avail for hw use <=
# */
#define RX_AE_THRESH_FREE_SHIFT 0
#define RX_AE_THRESH_COMP_MASK 0x0FFFE000 /* RX_COMP_AE will be
- generated if # of
+ generated if # of
completion entries
- avail for hw use <=
+ avail for hw use <=
# */
#define RX_AE_THRESH_COMP_SHIFT 13
-/* probabilities for random early drop (RED) thresholds on a FIFO threshold
- * basis. probability should increase when the FIFO level increases. control
- * packets are never dropped and not counted in stats. probability programmed
+/* probabilities for random early drop (RED) thresholds on a FIFO threshold
+ * basis. probability should increase when the FIFO level increases. control
+ * packets are never dropped and not counted in stats. probability programmed
* on a 12.5% granularity. e.g., 0x1 = 1/8 packets dropped.
* DEFAULT: 0x00000000
*/
@@ -885,8 +885,8 @@
#define RX_RED_8K_10K_FIFO_MASK 0x00FF0000 /* 8KB < FIFO thresh < 10KB */
#define RX_RED_10K_12K_FIFO_MASK 0xFF000000 /* 10KB < FIFO thresh < 12KB */
-/* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO.
- * RX control FIFO = # of packets in RX FIFO.
+/* FIFO fullness levels for RX FIFO, RX control FIFO, and RX IPP FIFO.
+ * RX control FIFO = # of packets in RX FIFO.
* DEFAULT: 0x0
*/
#define REG_RX_FIFO_FULLNESS 0x4050 /* (ro) RX FIFO fullness */
@@ -895,12 +895,12 @@
#define RX_FIFO_FULLNESS_RX_PKT_MASK 0x000000FF /* # packets in RX FIFO */
#define REG_RX_IPP_PACKET_COUNT 0x4054 /* RX IPP packet counter */
#define REG_RX_WORK_DMA_PTR_LOW 0x4058 /* RX working DMA ptr low */
-#define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr
+#define REG_RX_WORK_DMA_PTR_HI 0x405C /* RX working DMA ptr
high */
/* BIST testing ro RX FIFO, RX control FIFO, and RX IPP FIFO. only RX BIST
* START/COMPLETE is writeable. START will clear when the BIST has completed
- * checking all 17 RAMS.
+ * checking all 17 RAMS.
* DEFAULT: 0bxxxx xxxxx xxxx xxxx xxxx x000 0000 0000 00x0
*/
#define REG_RX_BIST 0x4060 /* (ro) RX BIST */
@@ -923,41 +923,41 @@
#define RX_BIST_REAS_27_PASS 0x00080000 /* RX Reas 27 passed */
#define RX_BIST_STATE_MASK 0x00078000 /* BIST state machine */
#define RX_BIST_SUMMARY 0x00000002 /* when BIST complete,
- summary pass bit
+ summary pass bit
contains AND of BIST
results of all 16
RAMS */
-#define RX_BIST_START 0x00000001 /* write 1 to start
+#define RX_BIST_START 0x00000001 /* write 1 to start
BIST. self clears
on completion. */
/* next location in RX CTRL FIFO that will be loaded w/ data from RX IPP/read
- * from to retrieve packet control info.
+ * from to retrieve packet control info.
* DEFAULT: 0
*/
-#define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO
+#define REG_RX_CTRL_FIFO_WRITE_PTR 0x4064 /* (ro) RX control FIFO
write ptr */
#define REG_RX_CTRL_FIFO_READ_PTR 0x4068 /* (ro) RX control FIFO read
ptr */
/* receive interrupt blanking. loaded each time interrupt alias register is
- * read.
+ * read.
* DEFAULT: 0x0
*/
#define REG_RX_BLANK_ALIAS_READ 0x406C /* RX blanking register for
alias read */
-#define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if #
- completion writebacks
- > # since last ISR
- read. 0 = no
- blanking. up to 2
- packets per
+#define RX_BAR_INTR_PACKET_MASK 0x000001FF /* assert RX_DONE if #
+ completion writebacks
+ > # since last ISR
+ read. 0 = no
+ blanking. up to 2
+ packets per
completion wb. */
#define RX_BAR_INTR_TIME_MASK 0x3FFFF000 /* assert RX_DONE if #
clocks > # since last
ISR read. each count
is 512 core clocks
- (125MHz). 0 = no
+ (125MHz). 0 = no
blanking. */
/* diagnostic access to RX FIFO. 32 LSB accessed via DATA_LOW. 32 MSB accessed
@@ -981,13 +981,13 @@
* should be last write access of the write sequence.
* DEFAULT: undefined
*/
-#define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and
+#define REG_RX_CTRL_FIFO_ADDR 0x4094 /* RX Control FIFO and
Batching FIFO addr */
-#define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data
+#define REG_RX_CTRL_FIFO_DATA_LOW 0x4098 /* RX Control FIFO data
low */
-#define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data
+#define REG_RX_CTRL_FIFO_DATA_MID 0x409C /* RX Control FIFO data
mid */
-#define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data
+#define REG_RX_CTRL_FIFO_DATA_HI 0x4100 /* RX Control FIFO data
hi and flow id */
#define RX_CTRL_FIFO_DATA_HI_CTRL 0x0001 /* upper bit of ctrl word */
#define RX_CTRL_FIFO_DATA_HI_FLOW_MASK 0x007E /* flow id */
@@ -1004,7 +1004,7 @@
T1 */
/* 64-bit pointer to receive data buffer in host memory used for headers and
- * small packets. MSB in high register. loaded by DMA state machine and
+ * small packets. MSB in high register. loaded by DMA state machine and
* increments as DMA writes receive data. only 50 LSB are incremented. top
* 13 bits taken from RX descriptor.
* DEFAULT: undefined
@@ -1013,17 +1013,17 @@
low */
#define REG_RX_HEADER_PAGE_PTR_HI 0x411C /* (ro) RX header page ptr
high */
-#define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer
+#define REG_RX_MTU_PAGE_PTR_LOW 0x4120 /* (ro) RX MTU page pointer
low */
-#define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer
+#define REG_RX_MTU_PAGE_PTR_HI 0x4124 /* (ro) RX MTU page pointer
high */
/* PIO diagnostic access to RX reassembly DMA Table RAM. 6-bit register holds
* one of 64 79-bit locations in the RX Reassembly DMA table and the addr of
- * one of the 64 byte locations in the Batching table. LOW holds 32 LSB.
+ * one of the 64 byte locations in the Batching table. LOW holds 32 LSB.
* MID holds the next 32 LSB. HIGH holds the 15 MSB. RX_DMA_EN must be set
* to 0 for PIO access. DATA_HIGH should be last write of write sequence.
- * layout:
+ * layout:
* reassmbl ptr [78:15] | reassmbl index [14:1] | reassmbl entry valid [0]
* DEFAULT: undefined
*/
@@ -1033,7 +1033,7 @@
#define REG_RX_TABLE_DATA_LOW 0x412C /* RX reassembly DMA table
data low */
-#define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table
+#define REG_RX_TABLE_DATA_MID 0x4130 /* RX reassembly DMA table
data mid */
#define REG_RX_TABLE_DATA_HI 0x4134 /* RX reassembly DMA table
data high */
@@ -1053,11 +1053,11 @@
#define REG_PLUS_RX_CBN_LOW(x) (REG_PLUS_RX_CB1_LOW + 8*((x) - 1))
#define REG_PLUS_RX_CBN_HI(x) (REG_PLUS_RX_CB1_HI + 8*((x) - 1))
#define REG_PLUS_RX_KICK1 0x4220 /* RX Kick 2 register */
-#define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2
+#define REG_PLUS_RX_COMP1 0x4224 /* (ro) RX completion 2
reg */
-#define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2
+#define REG_PLUS_RX_COMP1_HEAD 0x4228 /* (ro) RX completion 2
head reg. 4 total. */
-#define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2
+#define REG_PLUS_RX_COMP1_TAIL 0x422C /* RX completion 2
tail reg. 4 total. */
#define REG_PLUS_RX_COMPN_HEAD(x) (REG_PLUS_RX_COMP1_HEAD + 8*((x) - 1))
#define REG_PLUS_RX_COMPN_TAIL(x) (REG_PLUS_RX_COMP1_TAIL + 8*((x) - 1))
@@ -1068,13 +1068,13 @@
/** header parser registers **/
-/* RX parser configuration register.
+/* RX parser configuration register.
* DEFAULT: 0x1651004
*/
-#define REG_HP_CFG 0x4140 /* header parser
+#define REG_HP_CFG 0x4140 /* header parser
configuration reg */
#define HP_CFG_PARSE_EN 0x00000001 /* enab header parsing */
-#define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors
+#define HP_CFG_NUM_CPU_MASK 0x000000FC /* # processors
0 = 64. 0x3f = 63 */
#define HP_CFG_NUM_CPU_SHIFT 2
#define HP_CFG_SYN_INC_MASK 0x00000100 /* SYN bit won't increment
@@ -1088,7 +1088,7 @@
/* access to RX Instruction RAM. 5-bit register/counter holds addr
* of 39 bit entry to be read/written. 32 LSB in _DATA_LOW. 7 MSB in _DATA_HI.
* RX_DMA_EN must be 0 for RX instr PIO access. DATA_HI should be last access
- * of sequence.
+ * of sequence.
* DEFAULT: undefined
*/
#define REG_HP_INSTR_RAM_ADDR 0x4144 /* HP instruction RAM
@@ -1104,7 +1104,7 @@
#define HP_INSTR_RAM_LOW_OUTEN_SHIFT 20
#define HP_INSTR_RAM_LOW_OUTARG_MASK 0xFFC00000
#define HP_INSTR_RAM_LOW_OUTARG_SHIFT 22
-#define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM
+#define REG_HP_INSTR_RAM_DATA_MID 0x414C /* HP instruction RAM
data mid */
#define HP_INSTR_RAM_MID_OUTARG_MASK 0x00000003
#define HP_INSTR_RAM_MID_OUTARG_SHIFT 0
@@ -1131,7 +1131,7 @@
* 11-bit register. Data fills the LSB portion of bus if less than 32 bits.
* DATA_RAM: write RAM_FDB_DATA with index to access DATA_RAM.
* RAM bytes = 4*(x - 1) + [3:0]. e.g., 0 -> [3:0], 31 -> [123:120]
- * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access
+ * FLOWDB: write DATA_RAM_FDB register and then read/write FDB1-12 to access
* flow database.
* RX_DMA_EN must be 0 for RX parser RAM PIO access. RX Parser RAM data reg
* should be the last write access of the write sequence.
@@ -1139,17 +1139,17 @@
*/
#define REG_HP_DATA_RAM_FDB_ADDR 0x4154 /* HP data and FDB
RAM address */
-#define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte
- locations in header
- parser data ram to
+#define HP_DATA_RAM_FDB_DATA_MASK 0x001F /* select 1 of 86 byte
+ locations in header
+ parser data ram to
read/write */
#define HP_DATA_RAM_FDB_FDB_MASK 0x3F00 /* 1 of 64 353-bit locations
in the flow database */
#define REG_HP_DATA_RAM_DATA 0x4158 /* HP data RAM data */
-/* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes
+/* HP flow database registers: 1 - 12, 0x415C - 0x4188, 4 8-bit bytes
* FLOW_DB(1) = IP_SA[127:96], FLOW_DB(2) = IP_SA[95:64]
- * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0]
+ * FLOW_DB(3) = IP_SA[63:32], FLOW_DB(4) = IP_SA[31:0]
* FLOW_DB(5) = IP_DA[127:96], FLOW_DB(6) = IP_DA[95:64]
* FLOW_DB(7) = IP_DA[63:32], FLOW_DB(8) = IP_DA[31:0]
* FLOW_DB(9) = {TCP_SP[15:0],TCP_DP[15:0]}
@@ -1159,7 +1159,7 @@
#define REG_HP_FLOW_DB0 0x415C /* HP flow database 1 reg */
#define REG_HP_FLOW_DBN(x) (REG_HP_FLOW_DB0 + (x)*4)
-/* diagnostics for RX Header Parser block.
+/* diagnostics for RX Header Parser block.
* ASUN: the header parser state machine register is used for diagnostics
* purposes. however, the spec doesn't have any details on it.
*/
@@ -1167,7 +1167,7 @@
#define REG_HP_STATUS0 0x4190 /* (ro) HP status 1 */
#define HP_STATUS0_SAP_MASK 0xFFFF0000 /* SAP */
#define HP_STATUS0_L3_OFF_MASK 0x0000FE00 /* L3 offset */
-#define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU
+#define HP_STATUS0_LB_CPUNUM_MASK 0x000001F8 /* load balancing CPU
number */
#define HP_STATUS0_HRP_OPCODE_MASK 0x00000007 /* HRP opcode */
@@ -1179,11 +1179,11 @@
#define REG_HP_STATUS2 0x4198 /* (ro) HP status 3 */
#define HP_STATUS2_ACCUR2_MASK 0xF0000000 /* accu R2[3:0] */
-#define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start
+#define HP_STATUS2_CSUM_OFF_MASK 0x07F00000 /* checksum start
start offset */
#define HP_STATUS2_ACCUR1_MASK 0x000FE000 /* accu R1 */
#define HP_STATUS2_FORCE_DROP 0x00001000 /* force drop */
-#define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o
+#define HP_STATUS2_BWO_REASSM 0x00000800 /* batching w/o
reassembly */
#define HP_STATUS2_JH_SPLIT_EN 0x00000400 /* jumbo header split
enable */
@@ -1191,9 +1191,9 @@
check */
#define HP_STATUS2_DATA_MASK_ZERO 0x00000100 /* mask of data length
equal to zero */
-#define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload
+#define HP_STATUS2_FORCE_TCP_CHECK 0x00000080 /* force tcp payload
chk */
-#define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload
+#define HP_STATUS2_MASK_TCP_THRESH 0x00000040 /* mask of payload
threshold */
#define HP_STATUS2_NO_ASSIST 0x00000020 /* no assist */
#define HP_STATUS2_CTRL_PACKET_FLAG 0x00000010 /* control packet flag */
@@ -1214,7 +1214,7 @@
#define HP_RAM_BIST_HP_INSTR2_PASS 0x10000000 /* HP instr ram 2 */
#define HP_RAM_BIST_FDBM_AGE0_PASS 0x08000000 /* FDBM aging RAM0 */
#define HP_RAM_BIST_FDBM_AGE1_PASS 0x04000000 /* FDBM aging RAM1 */
-#define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0
+#define HP_RAM_BIST_FDBM_FLOWID00_PASS 0x02000000 /* FDBM flowid RAM0
bank 0 */
#define HP_RAM_BIST_FDBM_FLOWID10_PASS 0x01000000 /* FDBM flowid RAM1
bank 0 */
@@ -1247,25 +1247,25 @@
/* execute a pause flow control frame transmission
DEFAULT: 0x0XXXX */
#define REG_MAC_SEND_PAUSE 0x6008 /* send pause command reg */
-#define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time
+#define MAC_SEND_PAUSE_TIME_MASK 0x0000FFFF /* value of pause time
to be sent on network
- in units of slot
+ in units of slot
times */
#define MAC_SEND_PAUSE_SEND 0x00010000 /* send pause flow ctrl
frame on network */
/* bit set indicates that event occurred. auto-cleared when status register
- * is read and have corresponding mask bits in mask register. events will
- * trigger an interrupt if the corresponding mask bit is 0.
+ * is read and have corresponding mask bits in mask register. events will
+ * trigger an interrupt if the corresponding mask bit is 0.
* status register default: 0x00000000
* mask register default = 0xFFFFFFFF on reset
*/
#define REG_MAC_TX_STATUS 0x6010 /* TX MAC status reg */
-#define MAC_TX_FRAME_XMIT 0x0001 /* successful frame
+#define MAC_TX_FRAME_XMIT 0x0001 /* successful frame
transmision */
-#define MAC_TX_UNDERRUN 0x0002 /* terminated frame
+#define MAC_TX_UNDERRUN 0x0002 /* terminated frame
transmission due to
- data starvation in the
+ data starvation in the
xmit data path */
#define MAC_TX_MAX_PACKET_ERR 0x0004 /* frame exceeds max allowed
length passed to TX MAC
@@ -1286,7 +1286,7 @@
#define REG_MAC_RX_STATUS 0x6014 /* RX MAC status reg */
#define MAC_RX_FRAME_RECV 0x0001 /* successful receipt of
a frame */
-#define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to
+#define MAC_RX_OVERFLOW 0x0002 /* dropped frame due to
RX FIFO overflow */
#define MAC_RX_FRAME_COUNT 0x0004 /* rollover of receive frame
counter */
@@ -1294,27 +1294,27 @@
error counter */
#define MAC_RX_CRC_ERR 0x0010 /* rollover of crc error
counter */
-#define MAC_RX_LEN_ERR 0x0020 /* rollover of length
+#define MAC_RX_LEN_ERR 0x0020 /* rollover of length
error counter */
-#define MAC_RX_VIOL_ERR 0x0040 /* rollover of code
+#define MAC_RX_VIOL_ERR 0x0040 /* rollover of code
violation error */
/* DEFAULT: 0xXXXX0000 on reset */
#define REG_MAC_CTRL_STATUS 0x6018 /* MAC control status reg */
-#define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful
- reception of a
- pause control
+#define MAC_CTRL_PAUSE_RECEIVED 0x00000001 /* successful
+ reception of a
+ pause control
frame */
-#define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a
- transition from
- "not paused" to
+#define MAC_CTRL_PAUSE_STATE 0x00000002 /* MAC has made a
+ transition from
+ "not paused" to
"paused" */
-#define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a
- transition from
+#define MAC_CTRL_NOPAUSE_STATE 0x00000004 /* MAC has made a
+ transition from
"paused" to "not
paused" */
#define MAC_CTRL_PAUSE_TIME_MASK 0xFFFF0000 /* value of pause time
- operand that was
+ operand that was
received in the last
pause flow control
frame */
@@ -1326,13 +1326,13 @@
/* layout identical to CTRL MAC[2:0] */
#define REG_MAC_CTRL_MASK 0x6028 /* MAC control mask reg */
-/* to ensure proper operation, CFG_EN must be cleared to 0 and a delay
+/* to ensure proper operation, CFG_EN must be cleared to 0 and a delay
* imposed before writes to other bits in the TX_MAC_CFG register or any of
* the MAC parameters is performed. delay dependent upon time required to
* transmit a maximum size frame (= MAC_FRAMESIZE_MAX*8/Mbps). e.g.,
- * the delay for a 1518-byte frame on a 100Mbps network is 125us.
- * alternatively, just poll TX_CFG_EN until it reads back as 0.
- * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and
+ * the delay for a 1518-byte frame on a 100Mbps network is 125us.
+ * alternatively, just poll TX_CFG_EN until it reads back as 0.
+ * NOTE: on half-duplex 1Gbps, TX_CFG_CARRIER_EXTEND and
* RX_CFG_CARRIER_EXTEND should be set and the SLOT_TIME register should
* be 0x200 (slot time of 512 bytes)
*/
@@ -1340,12 +1340,12 @@
#define MAC_TX_CFG_EN 0x0001 /* enable TX MAC. 0 will
force TXMAC state
machine to remain in
- idle state or to
+ idle state or to
transition to idle state
on completion of an
ongoing packet. */
#define MAC_TX_CFG_IGNORE_CARRIER 0x0002 /* disable CSMA/CD deferral
- process. set to 1 when
+ process. set to 1 when
full duplex and 0 when
half duplex */
#define MAC_TX_CFG_IGNORE_COLL 0x0004 /* disable CSMA/CD backoff
@@ -1353,32 +1353,32 @@
full duplex and 0 when
half duplex */
#define MAC_TX_CFG_IPG_EN 0x0008 /* enable extension of the
- Rx-to-TX IPG. after
- receiving a frame, TX
- MAC will reset its
- deferral process to
+ Rx-to-TX IPG. after
+ receiving a frame, TX
+ MAC will reset its
+ deferral process to
carrier sense for the
amount of time = IPG0 +
- IPG1 and commit to
+ IPG1 and commit to
transmission for time
specified in IPG2. when
0 or when xmitting frames
back-to-pack (Tx-to-Tx
- IPG), TX MAC ignores
+ IPG), TX MAC ignores
IPG0 and will only use
IPG1 for deferral time.
IPG2 still used. */
#define MAC_TX_CFG_NEVER_GIVE_UP_EN 0x0010 /* TX MAC will not easily
- give up on frame
- xmission. if backoff
+ give up on frame
+ xmission. if backoff
algorithm reaches the
ATTEMPT_LIMIT, it will
clear attempts counter
and continue trying to
- send the frame as
- specified by
+ send the frame as
+ specified by
GIVE_UP_LIM. when 0,
- TX MAC will execute
+ TX MAC will execute
standard CSMA/CD prot. */
#define MAC_TX_CFG_NEVER_GIVE_UP_LIM 0x0020 /* when set, TX MAC will
continue to try to xmit
@@ -1386,13 +1386,13 @@
0, TX MAC will continue
to try xmitting until
successful or backoff
- algorithm reaches
+ algorithm reaches
ATTEMPT_LIMIT*16 */
#define MAC_TX_CFG_NO_BACKOFF 0x0040 /* modify CSMA/CD to disable
backoff algorithm. TX
MAC will not back off
after a xmission attempt
- that resulted in a
+ that resulted in a
collision. */
#define MAC_TX_CFG_SLOW_DOWN 0x0080 /* modify CSMA/CD so that
deferral process is reset
@@ -1408,11 +1408,11 @@
packets. when clear, CRC
generation is dependent
upon NO_CRC bit in the
- xmit control word from
+ xmit control word from
TX DMA */
#define MAC_TX_CFG_CARRIER_EXTEND 0x0200 /* enables xmit part of the
- carrier extension
- feature. this allows for
+ carrier extension
+ feature. this allows for
longer collision domains
by extending the carrier
and collision window
@@ -1422,44 +1422,44 @@
for half-duplex at 1Gbps,
clear otherwise. */
-/* when CRC is not stripped, reassembly packets will not contain the CRC.
+/* when CRC is not stripped, reassembly packets will not contain the CRC.
* these will be stripped by HRP because it reassembles layer 4 data, and the
- * CRC is layer 2. however, non-reassembly packets will still contain the CRC
+ * CRC is layer 2. however, non-reassembly packets will still contain the CRC
* when passed to the host. to ensure proper operation, need to wait 3.2ms
* after clearing RX_CFG_EN before writing to any other RX MAC registers
* or other MAC parameters. alternatively, poll RX_CFG_EN until it clears
- * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same
+ * to 0. similary, HASH_FILTER_EN and ADDR_FILTER_EN have the same
* restrictions as CFG_EN.
*/
#define REG_MAC_RX_CFG 0x6034 /* RX MAC config reg */
#define MAC_RX_CFG_EN 0x0001 /* enable RX MAC */
#define MAC_RX_CFG_STRIP_PAD 0x0002 /* always program to 0.
feature not supported */
-#define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the
- last 4 bytes of a
+#define MAC_RX_CFG_STRIP_FCS 0x0004 /* RX MAC will strip the
+ last 4 bytes of a
received frame. */
#define MAC_RX_CFG_PROMISC_EN 0x0008 /* promiscuous mode */
-#define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid
+#define MAC_RX_CFG_PROMISC_GROUP_EN 0x0010 /* accept all valid
multicast frames (group
bit in DA field set) */
#define MAC_RX_CFG_HASH_FILTER_EN 0x0020 /* use hash table to filter
multicast addresses */
-#define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use
- address filtering regs
+#define MAC_RX_CFG_ADDR_FILTER_EN 0x0040 /* cause RX MAC to use
+ address filtering regs
to filter both unicast
- and multicast
+ and multicast
addresses */
#define MAC_RX_CFG_DISABLE_DISCARD 0x0080 /* pass errored frames to
RX DMA by setting BAD
bit but not Abort bit
- in the status. CRC,
+ in the status. CRC,
framing, and length errs
- will not increment
+ will not increment
error counters. frames
which don't match dest
addr will be passed up
w/ BAD bit set. */
-#define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of
+#define MAC_RX_CFG_CARRIER_EXTEND 0x0100 /* enable reception of
packet bursts generated
by carrier extension
with packet bursting
@@ -1468,18 +1468,18 @@
/* DEFAULT: 0x0 */
#define REG_MAC_CTRL_CFG 0x6038 /* MAC control config reg */
-#define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for
- sending pause flow ctrl
+#define MAC_CTRL_CFG_SEND_PAUSE_EN 0x0001 /* respond to requests for
+ sending pause flow ctrl
frames */
-#define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received
+#define MAC_CTRL_CFG_RECV_PAUSE_EN 0x0002 /* respond to received
pause flow ctrl frames */
#define MAC_CTRL_CFG_PASS_CTRL 0x0004 /* pass valid MAC ctrl
packets to RX DMA */
/* to ensure proper operation, a global initialization sequence should be
* performed when a loopback config is entered or exited. if programmed after
- * a hw or global sw reset, RX/TX MAC software reset and initialization
- * should be done to ensure stable clocking.
+ * a hw or global sw reset, RX/TX MAC software reset and initialization
+ * should be done to ensure stable clocking.
* DEFAULT: 0x0
*/
#define REG_MAC_XIF_CFG 0x603C /* XIF config reg */
@@ -1489,26 +1489,26 @@
path to GMII recv data
path. phy mode register
clock selection must be
- set to GMII mode and
+ set to GMII mode and
GMII_MODE should be set
to 1. in loopback mode,
REFCLK will drive the
entire mac core. 0 for
normal operation. */
#define MAC_XIF_DISABLE_ECHO 0x0004 /* disables receive data
- path during packet
+ path during packet
xmission. clear to 0
in any full duplex mode,
in any loopback mode,
or in half-duplex SERDES
or SLINK modes. set when
- in half-duplex when
+ in half-duplex when
using external phy. */
#define MAC_XIF_GMII_MODE 0x0008 /* MAC operates with GMII
clocks and datapath */
#define MAC_XIF_MII_BUFFER_OUTPUT_EN 0x0010 /* MII_BUF_EN pin. enable
external tristate buffer
- on the MII receive
+ on the MII receive
bus. */
#define MAC_XIF_LINK_LED 0x0020 /* LINKLED# active (low) */
#define MAC_XIF_FDPLX_LED 0x0040 /* FDPLXLED# active (low) */
@@ -1521,7 +1521,7 @@
recommended: 0x04 */
#define REG_MAC_SLOT_TIME 0x604C /* slot time reg
recommended: 0x40 */
-#define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg
+#define REG_MAC_FRAMESIZE_MIN 0x6050 /* min frame size reg
recommended: 0x40 */
/* FRAMESIZE_MAX holds both the max frame size as well as the max burst size.
@@ -1536,39 +1536,39 @@
preamble bytes that the
TX MAC will xmit at the
beginning of each frame
- value should be 2 or
- greater. recommended
+ value should be 2 or
+ greater. recommended
value: 0x07 */
-#define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration
+#define REG_MAC_JAM_SIZE 0x605C /* jam size reg. duration
of jam in units of media
byte time. recommended
value: 0x04 */
#define REG_MAC_ATTEMPT_LIMIT 0x6060 /* attempt limit reg. #
of attempts TX MAC will
- make to xmit a frame
+ make to xmit a frame
before it resets its
attempts counter. after
- the limit has been
+ the limit has been
reached, TX MAC may or
may not drop the frame
dependent upon value
- in TX_MAC_CFG.
- recommended
+ in TX_MAC_CFG.
+ recommended
value: 0x10 */
#define REG_MAC_CTRL_TYPE 0x6064 /* MAC control type reg.
- type field of a MAC
+ type field of a MAC
ctrl frame. recommended
value: 0x8808 */
/* mac address registers: 0 - 44, 0x6080 - 0x6130, 4 8-bit bytes.
- * register contains comparison
+ * register contains comparison
* 0 16 MSB of primary MAC addr [47:32] of DA field
* 1 16 middle bits "" [31:16] of DA field
* 2 16 LSB "" [15:0] of DA field
* 3*x 16MSB of alt MAC addr 1-15 [47:32] of DA field
* 4*x 16 middle bits "" [31:16]
* 5*x 16 LSB "" [15:0]
- * 42 16 MSB of MAC CTRL addr [47:32] of DA.
+ * 42 16 MSB of MAC CTRL addr [47:32] of DA.
* 43 16 middle bits "" [31:16]
* 44 16 LSB "" [15:0]
* MAC CTRL addr must be the reserved multicast addr for MAC CTRL frames.
@@ -1586,39 +1586,39 @@
#define REG_MAC_ADDRN(x) (REG_MAC_ADDR0 + (x)*4)
#define REG_MAC_ADDR_FILTER0 0x614C /* address filter 0 reg
[47:32] */
-#define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg
+#define REG_MAC_ADDR_FILTER1 0x6150 /* address filter 1 reg
[31:16] */
-#define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg
+#define REG_MAC_ADDR_FILTER2 0x6154 /* address filter 2 reg
[15:0] */
#define REG_MAC_ADDR_FILTER2_1_MASK 0x6158 /* address filter 2 and 1
mask reg. 8-bit reg
contains nibble mask for
reg 2 and 1. */
-#define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask
+#define REG_MAC_ADDR_FILTER0_MASK 0x615C /* address filter 0 mask
reg */
-/* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes
+/* hash table registers: 0 - 15, 0x6160 - 0x619C, 4 8-bit bytes
* 16-bit registers contain bits of the hash table.
- * reg x -> [16*(15 - x) + 15 : 16*(15 - x)].
+ * reg x -> [16*(15 - x) + 15 : 16*(15 - x)].
* e.g., 15 -> [15:0], 0 -> [255:240]
*/
#define REG_MAC_HASH_TABLE0 0x6160 /* hash table 0 reg */
#define REG_MAC_HASH_TABLEN(x) (REG_MAC_HASH_TABLE0 + (x)*4)
-/* statistics registers. these registers generate an interrupt on
+/* statistics registers. these registers generate an interrupt on
* overflow. recommended initialization: 0x0000. most are 16-bits except
* for PEAK_ATTEMPTS register which is 8 bits.
*/
-#define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision
+#define REG_MAC_COLL_NORMAL 0x61A0 /* normal collision
counter. */
#define REG_MAC_COLL_FIRST 0x61A4 /* first attempt
- successful collision
+ successful collision
counter */
-#define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision
+#define REG_MAC_COLL_EXCESS 0x61A8 /* excessive collision
counter */
#define REG_MAC_COLL_LATE 0x61AC /* late collision counter */
-#define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base
- is the media byte
+#define REG_MAC_TIMER_DEFER 0x61B0 /* defer timer. time base
+ is the media byte
clock/256 */
#define REG_MAC_ATTEMPTS_PEAK 0x61B4 /* peak attempts reg */
#define REG_MAC_RECV_FRAME 0x61B8 /* receive frame counter */
@@ -1633,13 +1633,13 @@
10-bit register used as a
seed for the random number
generator for the CSMA/CD
- backoff algorithm. only
+ backoff algorithm. only
programmed after power-on
- reset and should be a
- random value which has a
- high likelihood of being
- unique for each MAC
- attached to a network
+ reset and should be a
+ random value which has a
+ high likelihood of being
+ unique for each MAC
+ attached to a network
segment (e.g., 10 LSB of
MAC address) */
@@ -1649,7 +1649,7 @@
/* 27-bit register has the current state for key state machines in the MAC */
#define REG_MAC_STATE_MACHINE 0x61D0 /* (ro) state machine reg */
-#define MAC_SM_RLM_MASK 0x07800000
+#define MAC_SM_RLM_MASK 0x07800000
#define MAC_SM_RLM_SHIFT 23
#define MAC_SM_RX_FC_MASK 0x00700000
#define MAC_SM_RX_FC_SHIFT 20
@@ -1666,26 +1666,26 @@
#define MAC_SM_TX_FIFO_EMPTY_MASK 0x00000007
#define MAC_SM_TX_FIFO_EMPTY_SHIFT 0
-/** MIF registers. the MIF can be programmed in either bit-bang or
+/** MIF registers. the MIF can be programmed in either bit-bang or
* frame mode.
**/
#define REG_MIF_BIT_BANG_CLOCK 0x6200 /* MIF bit-bang clock.
- 1 -> 0 will generate a
+ 1 -> 0 will generate a
rising edge. 0 -> 1 will
generate a falling edge. */
#define REG_MIF_BIT_BANG_DATA 0x6204 /* MIF bit-bang data. 1-bit
register generates data */
-#define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output
- enable. enable when
+#define REG_MIF_BIT_BANG_OUTPUT_EN 0x6208 /* MIF bit-bang output
+ enable. enable when
xmitting data from MIF to
transceiver. */
-/* 32-bit register serves as an instruction register when the MIF is
+/* 32-bit register serves as an instruction register when the MIF is
* programmed in frame mode. load this register w/ a valid instruction
* (as per IEEE 802.3u MII spec). poll this register to check for instruction
* execution completion. during a read operation, this register will also
- * contain the 16-bit data returned by the tranceiver. unless specified
- * otherwise, fields are considered "don't care" when polling for
+ * contain the 16-bit data returned by the tranceiver. unless specified
+ * otherwise, fields are considered "don't care" when polling for
* completion.
*/
#define REG_MIF_FRAME 0x620C /* MIF frame/output reg */
@@ -1693,14 +1693,14 @@
load w/ 01 when
issuing an instr */
#define MIF_FRAME_ST 0x40000000 /* STart of frame */
-#define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a
- write. 10 for a
+#define MIF_FRAME_OPCODE_MASK 0x30000000 /* opcode. 01 for a
+ write. 10 for a
read */
#define MIF_FRAME_OP_READ 0x20000000 /* read OPcode */
#define MIF_FRAME_OP_WRITE 0x10000000 /* write OPcode */
#define MIF_FRAME_PHY_ADDR_MASK 0x0F800000 /* phy address. when
issuing an instr,
- this field should be
+ this field should be
loaded w/ the XCVR
addr */
#define MIF_FRAME_PHY_ADDR_SHIFT 23
@@ -1724,12 +1724,12 @@
to be written in
transceiver reg for a
write. doesn't matter
- in a read. when
- polling for
+ in a read. when
+ polling for
completion, field is
"don't care" for write
- and 16-bit data
- returned by the
+ and 16-bit data
+ returned by the
transceiver for a
read (if valid bit
is set) */
@@ -1748,16 +1748,16 @@
#define MIF_CFG_POLL_REG_SHIFT 3
#define MIF_CFG_MDIO_0 0x0100 /* (ro) dual purpose.
when MDIO_0 is idle,
- 1 -> tranceiver is
+ 1 -> tranceiver is
connected to MDIO_0.
when MIF is communicating
- w/ MDIO_0 in bit-bang
+ w/ MDIO_0 in bit-bang
mode, this bit indicates
the incoming bit stream
during a read op */
#define MIF_CFG_MDIO_1 0x0200 /* (ro) dual purpose.
- when MDIO_1 is idle,
- 1 -> transceiver is
+ when MDIO_1 is idle,
+ 1 -> transceiver is
connected to MDIO_1.
when MIF is communicating
w/ MDIO_1 in bit-bang
@@ -1770,7 +1770,7 @@
/* 16-bit register used to determine which bits in the POLL_STATUS portion of
* the MIF_STATUS register will cause an interrupt. if a mask bit is 0,
- * corresponding bit of the POLL_STATUS will generate a MIF interrupt when
+ * corresponding bit of the POLL_STATUS will generate a MIF interrupt when
* set. DEFAULT: 0xFFFF
*/
#define REG_MIF_MASK 0x6214 /* MIF mask reg */
@@ -1779,7 +1779,7 @@
#define REG_MIF_STATUS 0x6218 /* MIF status reg */
#define MIF_STATUS_POLL_DATA_MASK 0xFFFF0000 /* poll data contains
the "latest image"
- update of the XCVR
+ update of the XCVR
reg being read */
#define MIF_STATUS_POLL_DATA_SHIFT 16
#define MIF_STATUS_POLL_STATUS_MASK 0x0000FFFF /* poll status indicates
@@ -1792,19 +1792,19 @@
/* 7-bit register has current state for all state machines in the MIF */
#define REG_MIF_STATE_MACHINE 0x621C /* MIF state machine reg */
-#define MIF_SM_CONTROL_MASK 0x07 /* control state machine
+#define MIF_SM_CONTROL_MASK 0x07 /* control state machine
state */
#define MIF_SM_EXECUTION_MASK 0x60 /* execution state machine
state */
/** PCS/Serialink. the following registers are equivalent to the standard
- * MII management registers except that they're directly mapped in
+ * MII management registers except that they're directly mapped in
* Cassini's register space.
**/
/* the auto-negotiation enable bit should be programmed the same at
* the link partner as in the local device to enable auto-negotiation to
- * complete. when that bit is reprogrammed, auto-neg/manual config is
+ * complete. when that bit is reprogrammed, auto-neg/manual config is
* restarted automatically.
* DEFAULT: 0x1040
*/
@@ -1815,10 +1815,10 @@
to MAC interface is
activated regardless
of activity */
-#define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS
+#define PCS_MII_CTRL_DUPLEX 0x0100 /* forced 0x0. PCS
behaviour same for
half and full dplx */
-#define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing.
+#define PCS_MII_RESTART_AUTONEG 0x0200 /* self clearing.
restart auto-
negotiation */
#define PCS_MII_ISOLATE 0x0400 /* read as 0. ignored
@@ -1829,10 +1829,10 @@
through automatic
link config before it
can be used. when 0,
- link can be used
+ link can be used
w/out any link config
phase */
-#define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on
+#define PCS_MII_10_100_SEL 0x2000 /* read as 0. ignored on
writes */
#define PCS_MII_RESET 0x8000 /* reset PCS. self-clears
when done */
@@ -1841,7 +1841,7 @@
#define REG_PCS_MII_STATUS 0x9004 /* PCS MII status reg */
#define PCS_MII_STATUS_EXTEND_CAP 0x0001 /* reads 0 */
#define PCS_MII_STATUS_JABBER_DETECT 0x0002 /* reads 0 */
-#define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up.
+#define PCS_MII_STATUS_LINK_STATUS 0x0004 /* 1 -> link up.
0 -> link down. 0 is
latched so that 0 is
kept until read. read
@@ -1853,7 +1853,7 @@
from received link code
word. only valid after
auto-neg completed */
-#define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation
+#define PCS_MII_STATUS_AUTONEG_COMP 0x0020 /* 1 -> auto-negotiation
completed
0 -> auto-negotiation not
completed */
@@ -1862,7 +1862,7 @@
a 1000 Base-X PHY. writes
to it are ignored */
-/* used during auto-negotiation.
+/* used during auto-negotiation.
* DEFAULT: 0x00E0
*/
#define REG_PCS_MII_ADVERT 0x9008 /* PCS MII advertisement
@@ -1873,7 +1873,7 @@
1000 Base-X */
#define PCS_MII_ADVERT_SYM_PAUSE 0x0080 /* advertise PAUSE
symmetric capability */
-#define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE
+#define PCS_MII_ADVERT_ASYM_PAUSE 0x0100 /* advertises PAUSE
asymmetric capability */
#define PCS_MII_ADVERT_RF_MASK 0x3000 /* remote fault. write bit13
to optionally indicate to
@@ -1881,7 +1881,7 @@
going off-line. bit12 will
get set when signal
detect == FAIL and will
- remain set until
+ remain set until
successful negotiation */
#define PCS_MII_ADVERT_ACK 0x4000 /* (ro) */
#define PCS_MII_ADVERT_NEXT_PAGE 0x8000 /* (ro) forced 0x0 */
@@ -1905,7 +1905,7 @@
0 when modifying
PCS_MII_ADVERT */
#define PCS_CFG_SD_OVERRIDE 0x02 /* sets signal detect to
- OK. bit is
+ OK. bit is
non-resettable */
#define PCS_CFG_SD_ACTIVE_LOW 0x04 /* changes interpretation
of optical signal to make
@@ -1914,23 +1914,23 @@
#define PCS_CFG_JITTER_STUDY_MASK 0x18 /* used to make jitter
measurements. a single
code group is xmitted
- regularly.
+ regularly.
0x0 = normal operation
- 0x1 = high freq test
+ 0x1 = high freq test
pattern, D21.5
0x2 = low freq test
pattern, K28.7
0x3 = reserved */
#define PCS_CFG_10MS_TIMER_OVERRIDE 0x20 /* shortens 10-20ms auto-
- negotiation timer to
+ negotiation timer to
a few cycles for test
purposes */
/* used for diagnostic purposes. bits 20-22 autoclear on read */
-#define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine
+#define REG_PCS_STATE_MACHINE 0x9014 /* (ro) PCS state machine
and diagnostic reg */
-#define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate
- xmission of idle.
+#define PCS_SM_TX_STATE_MASK 0x0000000F /* 0 and 1 indicate
+ xmission of idle.
otherwise, xmission of
a packet */
#define PCS_SM_RX_STATE_MASK 0x000000F0 /* 0 indicates reception
@@ -1943,39 +1943,39 @@
Config codes. cycling
through 0-1 indicates
reception of idles */
-#define PCS_SM_LINK_STATE_MASK 0x0001E000
+#define PCS_SM_LINK_STATE_MASK 0x0001E000
#define SM_LINK_STATE_UP 0x00016000 /* link state is up */
#define PCS_SM_LOSS_LINK_C 0x00100000 /* loss of link due to
- recept of Config
+ recept of Config
codes */
#define PCS_SM_LOSS_LINK_SYNC 0x00200000 /* loss of link due to
loss of sync */
-#define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes
+#define PCS_SM_LOSS_SIGNAL_DETECT 0x00400000 /* signal detect goes
from OK to FAIL. bit29
- will also be set if
+ will also be set if
this is set */
#define PCS_SM_NO_LINK_BREAKLINK 0x01000000 /* link not up due to
receipt of breaklink
C codes from partner.
C codes w/ 0 content
received triggering
- start/restart of
- autonegotiation.
+ start/restart of
+ autonegotiation.
should be sent for
no longer than 20ms */
-#define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being
+#define PCS_SM_NO_LINK_SERDES 0x02000000 /* serdes being
initialized. see serdes
state reg */
#define PCS_SM_NO_LINK_C 0x04000000 /* C codes not stable or
not received */
-#define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not
+#define PCS_SM_NO_LINK_SYNC 0x08000000 /* word sync not
achieved */
-#define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes
+#define PCS_SM_NO_LINK_WAIT_C 0x10000000 /* waiting for C codes
w/ ack bit set */
#define PCS_SM_NO_LINK_NO_IDLE 0x20000000 /* link partner continues
- to send C codes
- instead of idle
+ to send C codes
+ instead of idle
symbols or pkt data */
/* this register indicates interrupt changes in specific PCS MII status bits.
@@ -1991,21 +1991,21 @@
* DEFAULT: none
*/
#define REG_PCS_DATAPATH_MODE 0x9050 /* datapath mode reg */
-#define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and
- MII/GMII is selected.
+#define PCS_DATAPATH_MODE_MII 0x00 /* PCS is not used and
+ MII/GMII is selected.
selection between MII and
- GMII is controlled by
+ GMII is controlled by
XIF_CFG */
#define PCS_DATAPATH_MODE_SERDES 0x02 /* PCS is used via the
10-bit interface */
/* input to serdes chip or serialink block */
#define REG_PCS_SERDES_CTRL 0x9054 /* serdes control reg */
-#define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on
+#define PCS_SERDES_CTRL_LOOPBACK 0x01 /* enable loopback on
serdes interface */
#define PCS_SERDES_CTRL_SYNCD_EN 0x02 /* enable sync carrier
detection. should be
- 0x0 for normal
+ 0x0 for normal
operation */
#define PCS_SERDES_CTRL_LOCKREF 0x04 /* frequency-lock RBC[0:1]
to REFCLK when set.
@@ -2014,28 +2014,28 @@
serial data */
/* multiplex test outputs into the PROM address (PA_3 through PA_0) pins.
- * should be 0x0 for normal operations.
+ * should be 0x0 for normal operations.
* 0b000 normal operation, PROM address[3:0] selected
- * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read
- * 0b010 rxmac req, rx ack, rx tag, rx clk shared
- * 0b011 txmac req, tx ack, tx tag, tx retry req
- * 0b100 tx tp3, tx tp2, tx tp1, tx tp0
+ * 0b001 rxdma req, rxdma ack, rxdma ready, rxdma read
+ * 0b010 rxmac req, rx ack, rx tag, rx clk shared
+ * 0b011 txmac req, tx ack, tx tag, tx retry req
+ * 0b100 tx tp3, tx tp2, tx tp1, tx tp0
* 0b101 R period RX, R period TX, R period HP, R period BIM
* DEFAULT: 0x0
*/
#define REG_PCS_SHARED_OUTPUT_SEL 0x9058 /* shared output select */
#define PCS_SOS_PROM_ADDR_MASK 0x0007
-/* used for diagnostics. this register indicates progress of the SERDES
- * boot up.
+/* used for diagnostics. this register indicates progress of the SERDES
+ * boot up.
* 0b00 undergoing reset
* 0b01 waiting 500us while lockrefn is asserted
* 0b10 waiting for comma detect
- * 0b11 receive data is synchronized
+ * 0b11 receive data is synchronized
* DEFAULT: 0x0
*/
#define REG_PCS_SERDES_STATE 0x905C /* (ro) serdes state */
-#define PCS_SERDES_STATE_MASK 0x03
+#define PCS_SERDES_STATE_MASK 0x03
/* used for diagnostics. indicates number of packets transmitted or received.
* counters rollover w/out generating an interrupt.
@@ -2044,18 +2044,18 @@
#define REG_PCS_PACKET_COUNT 0x9060 /* (ro) PCS packet counter */
#define PCS_PACKET_COUNT_TX 0x000007FF /* pkts xmitted by PCS */
#define PCS_PACKET_COUNT_RX 0x07FF0000 /* pkts recvd by PCS
- whether they
+ whether they
encountered an error
or not */
-/** LocalBus Devices. the following provides run-time access to the
+/** LocalBus Devices. the following provides run-time access to the
* Cassini's PROM
***/
#define REG_EXPANSION_ROM_RUN_START 0x100000 /* expansion rom run time
access */
#define REG_EXPANSION_ROM_RUN_END 0x17FFFF
-#define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus
+#define REG_SECOND_LOCALBUS_START 0x180000 /* secondary local bus
device */
#define REG_SECOND_LOCALBUS_END 0x1FFFFF
@@ -2103,7 +2103,7 @@
#define CAS_MII_1000_EXTEND 0x0F
#define CAS_BMSR_1000_EXTEND 0x0100 /* supports 1000Base-T extended status */
-/*
+/*
* if autoneg is disabled, here's the table:
* BMCR_SPEED100 = 100Mbps
* BMCR_SPEED1000 = 1000Mbps
@@ -2145,7 +2145,7 @@ typedef struct cas_hp_inst {
u8 outenab; /* output enable: 0 = not, 1 = if match
2 = if !match, 3 = always */
u8 outshift; /* barrel shift right, 4 bits */
- u16 outmask;
+ u16 outmask;
} cas_hp_inst_t;
/* comparison */
@@ -2232,9 +2232,9 @@ typedef struct cas_hp_inst {
#ifdef USE_HP_IP46TCP4
static cas_hp_inst_t cas_prog_ip46tcp4tab[] = {
- CAS_PROG_IP46TCP4_PREAMBLE,
- { "TCP seq", /* DADDR should point to dest port */
- 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ,
+ CAS_PROG_IP46TCP4_PREAMBLE,
+ { "TCP seq", /* DADDR should point to dest port */
+ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ,
0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */
{ "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0,
S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */
@@ -2263,7 +2263,7 @@ static cas_hp_inst_t cas_prog_ip46tcp4tab[] = {
static cas_hp_inst_t cas_prog_ip46tcp4nohttptab[] = {
CAS_PROG_IP46TCP4_PREAMBLE,
{ "TCP seq", /* DADDR should point to dest port */
- 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ,
+ 0xFFFF, 0x0080, OP_EQ, 0, S2_HTTP, 0, S1_TCPFG, LD_SEQ,
0x081, 3, 0x0, 0xffff} , /* Load TCP seq # */
{ "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0,
S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f, }, /* Load TCP flags */
@@ -2328,7 +2328,7 @@ static cas_hp_inst_t cas_prog_ip4fragtab[] = {
{ "TCP seq", /* DADDR should point to dest port */
0x0000, 0x0000, OP_EQ, 0, S3_TCPFG, 4, S3_TCPFG, LD_SEQ,
0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */
- { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0,
+ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHL, 0,
S3_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */
{ "TCP length", 0x0000, 0x0000, OP_EQ, 0, S3_TCPHc, 0, S3_TCPHc,
LD_R1, 0x205, 3, 0xB, 0xf000},
@@ -2338,7 +2338,7 @@ static cas_hp_inst_t cas_prog_ip4fragtab[] = {
LD_FID, 0x103, 3, 0x0, 0xffff}, /* FID IP4 src+dst */
{ "IP4 frag offset", 0x0000, 0x0000, OP_EQ, 0, S3_FOFF, 0, S3_FOFF,
LD_SEQ, 0x040, 1, 0xD, 0xfff8},
- { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
+ { "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
IM_CTL, 0x001, 3, 0x0, 0x0001},
{ NULL },
};
@@ -2356,11 +2356,11 @@ static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = {
{ "TCP seq", /* DADDR should point to dest port */
0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 0, S1_TCPFG, LD_SEQ,
0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */
- { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0,
+ { "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0,
S1_TCPHL, ST_FLG, 0x000, 3, 0x0, 0x0000}, /* Load TCP flags */
- { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0,
+ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0,
S1_TCPHc, LD_R1, 0x205, 3, 0xB, 0xf000},
- { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0,
+ { "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0,
S1_PCKT, IM_CTL, 0x040, 3, 0x0, 0xffff}, /* set batch bit */
{ "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
IM_CTL, 0x001, 3, 0x0, 0x0001},
@@ -2381,7 +2381,7 @@ static cas_hp_inst_t cas_prog_ip46tcp4batchtab[] = {
static cas_hp_inst_t cas_prog_workaroundtab[] = {
{ "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0,
S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000} ,
- { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023,
+ { "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023,
IM_CTL, 0x04a, 3, 0x0, 0xffff},
{ "CFI?", 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023,
CL_REG, 0x000, 0, 0x0, 0x0000},
@@ -2395,7 +2395,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = {
IM_SAP, 0x6AE, 3, 0x0, 0xffff},
{ "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP,
LD_SUM, 0x00a, 1, 0x0, 0x0000},
- { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP,
+ { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP,
LD_LEN, 0x03e, 1, 0x0, 0xffff},
{ "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_CLNP,
LD_FID, 0x182, 3, 0x0, 0xffff}, /* FID IP4&TCP src+dst */
@@ -2408,7 +2408,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = {
{ "TCP64?", 0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_CLNP,
LD_LEN, 0x03f, 1, 0x0, 0xffff},
{ "TCP seq", /* DADDR should point to dest port */
- 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ,
+ 0x0000, 0x0000, OP_EQ, 0, S1_TCPFG, 4, S1_TCPFG, LD_SEQ,
0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */
{ "TCP control flags", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHL, 0,
S1_TCPHL, ST_FLG, 0x045, 3, 0x0, 0x002f}, /* Load TCP flags */
@@ -2429,7 +2429,7 @@ static cas_hp_inst_t cas_prog_workaroundtab[] = {
#ifdef USE_HP_ENCRYPT
static cas_hp_inst_t cas_prog_encryptiontab[] = {
- { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0,
+ { "packet arrival?", 0xffff, 0x0000, OP_NP, 6, S1_VLAN, 0,
S1_PCKT, CL_REG, 0x3ff, 1, 0x0, 0x0000},
{ "VLAN?", 0xffff, 0x8100, OP_EQ, 1, S1_CFI, 0, S1_8023,
IM_CTL, 0x00a, 3, 0x0, 0xffff},
@@ -2439,19 +2439,19 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = {
00,
#endif
{ "CFI?", /* FIND CFI and If FIND go to CleanUP1 (ignore and send to host) */
- 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023,
+ 0x1000, 0x1000, OP_EQ, 0, S1_CLNP, 1, S1_8023,
CL_REG, 0x000, 0, 0x0, 0x0000},
- { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4,
+ { "8023?", 0xffff, 0x0600, OP_LT, 1, S1_LLC, 0, S1_IPV4,
CL_REG, 0x000, 0, 0x0, 0x0000},
- { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP,
+ { "LLC?", 0xffff, 0xaaaa, OP_EQ, 1, S1_LLCc, 0, S1_CLNP,
CL_REG, 0x000, 0, 0x0, 0x0000},
{ "LLCc?", 0xff00, 0x0300, OP_EQ, 2, S1_IPV4, 0, S1_CLNP,
CL_REG, 0x000, 0, 0x0, 0x0000},
- { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6,
+ { "IPV4?", 0xffff, 0x0800, OP_EQ, 1, S1_IPV4c, 0, S1_IPV6,
LD_SAP, 0x100, 3, 0x0, 0xffff},
- { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP,
+ { "IPV4 cont?", 0xff00, 0x4500, OP_EQ, 3, S1_IPV4F, 0, S1_CLNP,
LD_SUM, 0x00a, 1, 0x0, 0x0000},
- { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP,
+ { "IPV4 frag?", 0x3fff, 0x0000, OP_EQ, 1, S1_TCP44, 0, S1_CLNP,
LD_LEN, 0x03e, 1, 0x0, 0xffff},
{ "TCP44?", 0x00ff, 0x0006, OP_EQ, 7, S1_TCPSQ, 0, S1_ESP4,
LD_FID, 0x182, 1, 0x0, 0xffff}, /* FID IP4&TCP src+dst */
@@ -2459,9 +2459,9 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = {
LD_SUM, 0x015, 1, 0x0, 0x0000},
{ "IPV6 len", 0xf000, 0x6000, OP_EQ, 0, S1_IPV6c, 0, S1_CLNP,
IM_R1, 0x128, 1, 0x0, 0xffff},
- { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP,
+ { "IPV6 cont?", 0x0000, 0x0000, OP_EQ, 3, S1_TCP64, 0, S1_CLNP,
LD_FID, 0x484, 1, 0x0, 0xffff}, /* FID IP6&TCP src+dst */
- { "TCP64?",
+ { "TCP64?",
#if 0
//@@@0xff00, 0x0600, OP_EQ, 18, S1_TCPSQ, 0, S1_ESP6, LD_LEN, 0x03f, 1, 0x0, 0xffff,
#endif
@@ -2472,10 +2472,10 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = {
0x081, 3, 0x0, 0xffff}, /* Load TCP seq # */
{ "TCP control flags", 0xFFFF, 0x8080, OP_EQ, 0, S2_HTTP, 0,
S1_TCPHL, ST_FLG, 0x145, 2, 0x0, 0x002f}, /* Load TCP flags */
- { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc,
+ { "TCP length", 0x0000, 0x0000, OP_EQ, 0, S1_TCPHc, 0, S1_TCPHc,
LD_R1, 0x205, 3, 0xB, 0xf000} ,
{ "TCP length cont", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0,
- S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff},
+ S1_PCKT, LD_HDR, 0x0ff, 3, 0x0, 0xffff},
{ "Cleanup", 0x0000, 0x0000, OP_EQ, 0, S1_CLNP2, 0, S1_CLNP2,
IM_CTL, 0x001, 3, 0x0, 0x0001},
{ "Cleanup 2", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
@@ -2483,7 +2483,7 @@ static cas_hp_inst_t cas_prog_encryptiontab[] = {
{ "Drop packet", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
IM_CTL, 0x080, 3, 0x0, 0xffff},
{ "No HTTP", 0x0000, 0x0000, OP_EQ, 0, S1_PCKT, 0, S1_PCKT,
- IM_CTL, 0x044, 3, 0x0, 0xffff},
+ IM_CTL, 0x044, 3, 0x0, 0xffff},
{ "IPV4 ESP encrypted?", /* S1_ESP4 */
0x00ff, 0x0032, OP_EQ, 0, S1_CLNP2, 0, S1_AH4, IM_CTL,
0x021, 1, 0x0, 0xffff},
@@ -4044,7 +4044,7 @@ cas_saturn_patch_t cas_saturn_patch[] = {
* deal with that, i just allocate rings to create the desired
* alignment. here are the constraints:
* RX DESC and COMP rings must be 8KB aligned
- * TX DESC must be 2KB aligned.
+ * TX DESC must be 2KB aligned.
* if you change the numbers, be cognizant of how the alignment will change
* in INIT_BLOCK as well.
*/
@@ -4095,20 +4095,20 @@ cas_saturn_patch_t cas_saturn_patch[] = {
/* min is 2k, but we can't do jumbo frames unless it's at least 8k */
#define CAS_MIN_PAGE_SHIFT 11 /* 2048 */
#define CAS_JUMBO_PAGE_SHIFT 13 /* 8192 */
-#define CAS_MAX_PAGE_SHIFT 14 /* 16384 */
+#define CAS_MAX_PAGE_SHIFT 14 /* 16384 */
#define TX_DESC_BUFLEN_MASK 0x0000000000003FFFULL /* buffer length in
bytes. 0 - 9256 */
#define TX_DESC_BUFLEN_SHIFT 0
#define TX_DESC_CSUM_START_MASK 0x00000000001F8000ULL /* checksum start. #
- of bytes to be
+ of bytes to be
skipped before
csum calc begins.
value must be
even */
#define TX_DESC_CSUM_START_SHIFT 15
#define TX_DESC_CSUM_STUFF_MASK 0x000000001FE00000ULL /* checksum stuff.
- byte offset w/in
+ byte offset w/in
the pkt for the
1st csum byte.
must be > 8 */
@@ -4137,7 +4137,7 @@ struct cas_rx_desc {
/* received packets are put on the completion ring. */
/* word 1 */
-#define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL
+#define RX_COMP1_DATA_SIZE_MASK 0x0000000007FFE000ULL
#define RX_COMP1_DATA_SIZE_SHIFT 13
#define RX_COMP1_DATA_OFF_MASK 0x000001FFF8000000ULL
#define RX_COMP1_DATA_OFF_SHIFT 27
@@ -4147,8 +4147,8 @@ struct cas_rx_desc {
#define RX_COMP1_SKIP_SHIFT 55
#define RX_COMP1_RELEASE_NEXT 0x0200000000000000ULL
#define RX_COMP1_SPLIT_PKT 0x0400000000000000ULL
-#define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL
-#define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL
+#define RX_COMP1_RELEASE_FLOW 0x0800000000000000ULL
+#define RX_COMP1_RELEASE_DATA 0x1000000000000000ULL
#define RX_COMP1_RELEASE_HDR 0x2000000000000000ULL
#define RX_COMP1_TYPE_MASK 0xC000000000000000ULL
#define RX_COMP1_TYPE_SHIFT 62
@@ -4201,7 +4201,7 @@ struct cas_rx_desc {
/* we encode the following: ring/index/release. only 14 bits
* are usable.
- * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and
+ * NOTE: the encoding is dependent upon RX_DESC_RING_SIZE and
* MAX_RX_DESC_RINGS. */
#define RX_INDEX_NUM_MASK 0x0000000000000FFFULL
#define RX_INDEX_NUM_SHIFT 0
@@ -4214,7 +4214,7 @@ struct cas_rx_comp {
u64 word2;
u64 word3;
u64 word4;
-};
+};
enum link_state {
link_down = 0, /* No link, will retry */
@@ -4235,9 +4235,9 @@ typedef struct cas_page {
/* some alignment constraints:
* TX DESC, RX DESC, and RX COMP must each be 8K aligned.
- * TX COMPWB must be 8-byte aligned.
+ * TX COMPWB must be 8-byte aligned.
* to accomplish this, here's what we do:
- *
+ *
* INIT_BLOCK_RX_COMP = 64k (already aligned)
* INIT_BLOCK_RX_DESC = 8k
* INIT_BLOCK_TX = 8k
@@ -4250,9 +4250,9 @@ typedef struct cas_page {
struct cas_init_block {
struct cas_rx_comp rxcs[N_RX_COMP_RINGS][INIT_BLOCK_RX_COMP];
- struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC];
+ struct cas_rx_desc rxds[N_RX_DESC_RINGS][INIT_BLOCK_RX_DESC];
struct cas_tx_desc txds[N_TX_RINGS][INIT_BLOCK_TX];
- u64 tx_compwb;
+ u64 tx_compwb;
};
/* tiny buffers to deal with target abort issue. we allocate a bit
@@ -4278,7 +4278,7 @@ struct cas {
int tx_new[N_TX_RINGS], tx_old[N_TX_RINGS];
int rx_old[N_RX_DESC_RINGS];
int rx_cur[N_RX_COMP_RINGS], rx_new[N_RX_COMP_RINGS];
- int rx_last[N_RX_DESC_RINGS];
+ int rx_last[N_RX_DESC_RINGS];
/* Set when chip is actually in operational state
* (ie. not power managed) */
@@ -4337,7 +4337,7 @@ struct cas {
int min_frame_size; /* for tx fifo workaround */
/* page size allocation */
- int page_size;
+ int page_size;
int page_order;
int mtu_stride;
@@ -4362,7 +4362,7 @@ struct cas {
#ifdef CONFIG_CASSINI_QGE_DEBUG
atomic_t interrupt_seen; /* 1 if any interrupts are getting through */
#endif
-
+
/* Link-down problem workaround */
#define LINK_TRANSITION_UNKNOWN 0
#define LINK_TRANSITION_ON_FAILURE 1
@@ -4383,7 +4383,7 @@ struct cas {
int casreg_len; /* reg-space size for dumping */
u64 pause_entered;
u16 pause_last_time_recvd;
-
+
dma_addr_t block_dvma, tx_tiny_dvma[N_TX_RINGS];
struct pci_dev *pdev;
struct net_device *dev;
@@ -4394,7 +4394,7 @@ struct cas {
#define RX_COMP_ENTRY(r, x) ((x) & (RX_COMP_RINGN_SIZE(r) - 1))
#define TX_BUFF_COUNT(r, x, y) ((x) <= (y) ? ((y) - (x)) : \
- (TX_DESC_RINGN_SIZE(r) - (x) + (y)))
+ (TX_DESC_RINGN_SIZE(r) - (x) + (y)))
#define TX_BUFFS_AVAIL(cp, i) ((cp)->tx_old[(i)] <= (cp)->tx_new[(i)] ? \
(cp)->tx_old[(i)] + (TX_DESC_RINGN_SIZE(i) - 1) - (cp)->tx_new[(i)] : \
OpenPOWER on IntegriCloud