summaryrefslogtreecommitdiffstats
path: root/drivers/net/can/usb/kvaser_usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/usb/kvaser_usb.c')
-rw-r--r--drivers/net/can/usb/kvaser_usb.c28
1 files changed, 15 insertions, 13 deletions
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index c32cd61..7af379c 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -587,7 +587,7 @@ static int kvaser_usb_simple_msg_async(struct kvaser_usb_net_priv *priv,
usb_sndbulkpipe(dev->udev,
dev->bulk_out->bEndpointAddress),
buf, msg->len,
- kvaser_usb_simple_msg_callback, priv);
+ kvaser_usb_simple_msg_callback, netdev);
usb_anchor_urb(urb, &priv->tx_submitted);
err = usb_submit_urb(urb, GFP_ATOMIC);
@@ -662,11 +662,6 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
priv = dev->nets[channel];
stats = &priv->netdev->stats;
- if (status & M16C_STATE_BUS_RESET) {
- kvaser_usb_unlink_tx_urbs(priv);
- return;
- }
-
skb = alloc_can_err_skb(priv->netdev, &cf);
if (!skb) {
stats->rx_dropped++;
@@ -677,7 +672,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
netdev_dbg(priv->netdev, "Error status: 0x%02x\n", status);
- if (status & M16C_STATE_BUS_OFF) {
+ if (status & (M16C_STATE_BUS_OFF | M16C_STATE_BUS_RESET)) {
cf->can_id |= CAN_ERR_BUSOFF;
priv->can.can_stats.bus_off++;
@@ -703,9 +698,7 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
}
new_state = CAN_STATE_ERROR_PASSIVE;
- }
-
- if (status == M16C_STATE_BUS_ERROR) {
+ } else if (status & M16C_STATE_BUS_ERROR) {
if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
((txerr >= 96) || (rxerr >= 96))) {
cf->can_id |= CAN_ERR_CRTL;
@@ -715,7 +708,8 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
priv->can.can_stats.error_warning++;
new_state = CAN_STATE_ERROR_WARNING;
- } else if (priv->can.state > CAN_STATE_ERROR_ACTIVE) {
+ } else if ((priv->can.state > CAN_STATE_ERROR_ACTIVE) &&
+ ((txerr < 96) && (rxerr < 96))) {
cf->can_id |= CAN_ERR_PROT;
cf->data[2] = CAN_ERR_PROT_ACTIVE;
@@ -1590,7 +1584,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
{
struct kvaser_usb *dev;
int err = -ENOMEM;
- int i;
+ int i, retry = 3;
dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
@@ -1608,7 +1602,15 @@ static int kvaser_usb_probe(struct usb_interface *intf,
usb_set_intfdata(intf, dev);
- err = kvaser_usb_get_software_info(dev);
+ /* On some x86 laptops, plugging a Kvaser device again after
+ * an unplug makes the firmware always ignore the very first
+ * command. For such a case, provide some room for retries
+ * instead of completely exiting the driver.
+ */
+ do {
+ err = kvaser_usb_get_software_info(dev);
+ } while (--retry && err == -ETIMEDOUT);
+
if (err) {
dev_err(&intf->dev,
"Cannot get software infos, error %d\n", err);
OpenPOWER on IntegriCloud