1 files changed, 11 insertions, 16 deletions

diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index a6915aa..696e84a 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -8904,8 +8904,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->multi_mode = multi_mode;
 	bp->int_mode = int_mode;
 
-	bp->dev->features |= NETIF_F_GRO;
-
 	/* Set TPA flags */
 	if (disable_tpa) {
 		bp->flags &= ~TPA_ENABLE_FLAG;
@@ -8925,8 +8923,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 
 	bp->tx_ring_size = MAX_TX_AVAIL;
 
-	bp->rx_csum = 1;
-
 	/* make sure that the numbers are in the right granularity */
 	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
 	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
@@ -9304,6 +9300,8 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= bnx2x_ioctl,
 	.ndo_change_mtu		= bnx2x_change_mtu,
+	.ndo_fix_features	= bnx2x_fix_features,
+	.ndo_set_features	= bnx2x_set_features,
 	.ndo_tx_timeout		= bnx2x_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= poll_bnx2x,
@@ -9430,20 +9428,17 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 
 	dev->netdev_ops = &bnx2x_netdev_ops;
 	bnx2x_set_ethtool_ops(dev);
-	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-	if (bp->flags & USING_DAC_FLAG)
-		dev->features |= NETIF_F_HIGHDMA;
-	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->features |= NETIF_F_TSO6;
-	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
 
-	dev->vlan_features |= NETIF_F_SG;
-	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
+		NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_HW_VLAN_TX;
+
+	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
+
+	dev->features |= dev->hw_features | NETIF_F_HW_VLAN_RX;
 	if (bp->flags & USING_DAC_FLAG)
-		dev->vlan_features |= NETIF_F_HIGHDMA;
-	dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
-	dev->vlan_features |= NETIF_F_TSO6;
+		dev->features |= NETIF_F_HIGHDMA;
 
 #ifdef BCM_DCBNL
 	dev->dcbnl_ops = &bnx2x_dcbnl_ops;