diff options
Diffstat (limited to 'drivers/net/atl1c/atl1c_hw.h')
| -rw-r--r-- | drivers/net/atl1c/atl1c_hw.h | 43 |
1 files changed, 2 insertions, 41 deletions
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h index 3dd67597..655fc6c 100644 --- a/drivers/net/atl1c/atl1c_hw.h +++ b/drivers/net/atl1c/atl1c_hw.h @@ -736,55 +736,16 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw); #define REG_DEBUG_DATA0 0x1900 #define REG_DEBUG_DATA1 0x1904 -/* PHY Control Register */ -#define MII_BMCR 0x00 -#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define BMCR_POWER_DOWN 0x0800 /* Power down */ -#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define BMCR_SPEED_MASK 0x2040 -#define BMCR_SPEED_1000 0x0040 -#define BMCR_SPEED_100 0x2000 -#define BMCR_SPEED_10 0x0000 - -/* PHY Status Register */ -#define MII_BMSR 0x01 -#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -#define MII_PHYSID1 0x02 -#define MII_PHYSID2 0x03 #define L1D_MPW_PHYID1 0xD01C /* V7 */ #define L1D_MPW_PHYID2 0xD01D /* V1-V6 */ #define L1D_MPW_PHYID3 0xD01E /* V8 */ /* Autoneg Advertisement Register */ -#define MII_ADVERTISE 0x04 -#define ADVERTISE_SPEED_MASK 0x01E0 -#define ADVERTISE_DEFAULT_CAP 0x0DE0 +#define ADVERTISE_DEFAULT_CAP \ + (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM) /* 1000BASE-T Control Register */ -#define MII_GIGA_CR 0x09 #define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */ #define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ |
