summaryrefslogtreecommitdiffstats
path: root/drivers/net/atl1c/atl1c_hw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/atl1c/atl1c_hw.h')
-rw-r--r--drivers/net/atl1c/atl1c_hw.h43
1 files changed, 2 insertions, 41 deletions
diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h
index 3dd67597..655fc6c 100644
--- a/drivers/net/atl1c/atl1c_hw.h
+++ b/drivers/net/atl1c/atl1c_hw.h
@@ -736,55 +736,16 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define REG_DEBUG_DATA0 0x1900
#define REG_DEBUG_DATA1 0x1904
-/* PHY Control Register */
-#define MII_BMCR 0x00
-#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define BMCR_POWER_DOWN 0x0800 /* Power down */
-#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define BMCR_SPEED_MASK 0x2040
-#define BMCR_SPEED_1000 0x0040
-#define BMCR_SPEED_100 0x2000
-#define BMCR_SPEED_10 0x0000
-
-/* PHY Status Register */
-#define MII_BMSR 0x01
-#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
-
-#define MII_PHYSID1 0x02
-#define MII_PHYSID2 0x03
#define L1D_MPW_PHYID1 0xD01C /* V7 */
#define L1D_MPW_PHYID2 0xD01D /* V1-V6 */
#define L1D_MPW_PHYID3 0xD01E /* V8 */
/* Autoneg Advertisement Register */
-#define MII_ADVERTISE 0x04
-#define ADVERTISE_SPEED_MASK 0x01E0
-#define ADVERTISE_DEFAULT_CAP 0x0DE0
+#define ADVERTISE_DEFAULT_CAP \
+ (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)
/* 1000BASE-T Control Register */
-#define MII_GIGA_CR 0x09
#define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */
#define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */
OpenPOWER on IntegriCloud