summaryrefslogtreecommitdiffstats
path: root/drivers/net/amd8111e.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/amd8111e.c')
-rw-r--r--drivers/net/amd8111e.c12
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 07a6697e..187ac6e 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -809,7 +809,6 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
lp->coal_conf.rx_packets++;
lp->coal_conf.rx_bytes += pkt_len;
num_rx_pkt++;
- dev->last_rx = jiffies;
err_next_pkt:
lp->rx_ring[rx_index].buff_phy_addr
@@ -832,7 +831,7 @@ static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
if (rx_pkt_limit > 0) {
/* Receive descriptor is empty now */
spin_lock_irqsave(&lp->lock, flags);
- __netif_rx_complete(dev, napi);
+ __netif_rx_complete(napi);
writel(VAL0|RINTEN0, mmio + INTEN0);
writel(VAL2 | RDMD0, mmio + CMD0);
spin_unlock_irqrestore(&lp->lock, flags);
@@ -1171,11 +1170,11 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
/* Check if Receive Interrupt has occurred. */
if (intr0 & RINT0) {
- if (netif_rx_schedule_prep(dev, &lp->napi)) {
+ if (netif_rx_schedule_prep(&lp->napi)) {
/* Disable receive interupts */
writel(RINTEN0, mmio + INTEN0);
/* Schedule a polling routine */
- __netif_rx_schedule(dev, &lp->napi);
+ __netif_rx_schedule(&lp->napi);
} else if (intren0 & RINTEN0) {
printk("************Driver bug! \
interrupt while in poll\n");
@@ -1821,7 +1820,6 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
unsigned long reg_addr,reg_len;
struct amd8111e_priv* lp;
struct net_device* dev;
- DECLARE_MAC_BUF(mac);
err = pci_enable_device(pdev);
if(err){
@@ -1963,8 +1961,8 @@ static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
dev->name,MODULE_VERS);
- printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %s\n",
- dev->name, chip_version, print_mac(mac, dev->dev_addr));
+ printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
+ dev->name, chip_version, dev->dev_addr);
if (lp->ext_phy_id)
printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
dev->name, lp->ext_phy_id, lp->ext_phy_addr);
OpenPOWER on IntegriCloud