diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 112 |
1 files changed, 65 insertions, 47 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f08e01b..8a835eb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3,6 +3,8 @@ # Network device configuration # +menu "Network device support" + config NETDEVICES depends on NET bool "Network device support" @@ -21,9 +23,12 @@ config NETDEVICES If unsure, say Y. +# All the following symbols are dependent on NETDEVICES - do not repeat +# that for each of the symbols. +if NETDEVICES + config DUMMY tristate "Dummy net driver support" - depends on NETDEVICES ---help--- This is essentially a bit-bucket device (i.e. traffic you send to this device is consigned into oblivion) with a configurable IP @@ -43,7 +48,6 @@ config DUMMY config BONDING tristate "Bonding driver support" - depends on NETDEVICES depends on INET ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet @@ -61,7 +65,6 @@ config BONDING config EQUALIZER tristate "EQL (serial line load balancing) support" - depends on NETDEVICES ---help--- If you have two serial connections to some other computer (this usually requires two modems and two telephone lines) and you use @@ -81,7 +84,6 @@ config EQUALIZER config TUN tristate "Universal TUN/TAP device driver support" - depends on NETDEVICES select CRC32 ---help--- TUN/TAP provides packet reception and transmission for user space @@ -105,7 +107,7 @@ config TUN config NET_SB1000 tristate "General Instruments Surfboard 1000" - depends on NETDEVICES && PNP + depends on PNP ---help--- This is a driver for the General Instrument (also known as NextLevel) SURFboard 1000 internal @@ -127,16 +129,14 @@ config NET_SB1000 If you don't have this card, of course say N. -if NETDEVICES source "drivers/net/arcnet/Kconfig" -endif # # Ethernet # menu "Ethernet (10 or 100Mbit)" - depends on NETDEVICES && !UML + depends on !UML config NET_ETHERNET bool "Ethernet (10 or 100Mbit)" @@ -824,6 +824,18 @@ config SMC9194 <file:Documentation/networking/net-modules.txt>. The module will be called smc9194. +config DM9000 + tristate "DM9000 support" + depends on ARM && NET_ETHERNET + select CRC32 + select MII + ---help--- + Support for DM9000 chipset. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called dm9000. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA @@ -989,21 +1001,6 @@ config EEXPRESS_PRO <file:Documentation/networking/net-modules.txt>. The module will be called eepro. -config FMV18X - tristate "FMV-181/182/183/184 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - ---help--- - If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - If you use an FMV-183 or FMV-184 and it is not working, you may need - to disable Plug & Play mode of the card. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called fmv18x. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on NET_ISA @@ -1092,14 +1089,6 @@ config SEEQ8005 <file:Documentation/networking/net-modules.txt>. The module will be called seeq8005. -config SK_G16 - tristate "SK_G16 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - config SKMC tristate "SKnet MCA support" depends on NET_ETHERNET && MCA && BROKEN @@ -1146,7 +1135,7 @@ config IBMLANA config IBMVETH tristate "IBM LAN Virtual Ethernet support" - depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES + depends on NET_ETHERNET && PPC_PSERIES ---help--- This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -1331,7 +1320,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || ARCH_IXDP2X01) + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1499,14 +1488,14 @@ config 8139CP will be called 8139cp. This is recommended. config 8139TOO - tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support" + tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on - the RTL8139 chips. If you have one of those, say Y and read - the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. + the RTL 8129/8130/8139 chips. If you have one of those, say Y and + read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. To compile this driver as a module, choose M here: the module will be called 8139too. This is recommended. @@ -1769,7 +1758,7 @@ endmenu # menu "Ethernet (1000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config ACENIC tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" @@ -1932,6 +1921,18 @@ config R8169_VLAN If in doubt, say Y. +config SKGE + tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx + and related Gigabit Ethernet adapters. It is a new smaller driver + driver with better performance and more complete ethtool support. + + It does not support the link failover and network management + features that "portable" vendor supplied sk98lin driver does. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI @@ -2088,7 +2089,7 @@ endmenu # menu "Ethernet (10000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config IXGB tristate "Intel(R) PRO/10GbE support" @@ -2183,11 +2184,11 @@ source "drivers/s390/net/Kconfig" config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" - depends on NETDEVICES && PPC_ISERIES + depends on PPC_ISERIES config FDDI bool "FDDI driver support" - depends on NETDEVICES && (PCI || EISA) + depends on (PCI || EISA) help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can @@ -2236,7 +2237,7 @@ config SKFP config HIPPI bool "HIPPI driver support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL && INET && PCI + depends on EXPERIMENTAL && INET && PCI help HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI @@ -2268,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS config PLIP tristate "PLIP (parallel port) support" - depends on NETDEVICES && PARPORT + depends on PARPORT ---help--- PLIP (Parallel Line Internet Protocol) is used to create a reasonably fast mini network consisting of two (or, rarely, more) @@ -2304,7 +2305,6 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" - depends on NETDEVICES ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2440,7 +2440,6 @@ config PPPOATM config SLIP tristate "SLIP (serial line) support" - depends on NETDEVICES ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some @@ -2507,7 +2506,7 @@ config SLIP_MODE_SLIP6 config NET_FC bool "Fibre Channel driver support" - depends on NETDEVICES && SCSI && PCI + depends on SCSI && PCI help Fibre Channel is a high speed serial protocol mainly used to connect large storage devices to the computer; it is compatible with and @@ -2520,7 +2519,7 @@ config NET_FC config SHAPER tristate "Traffic Shaper (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to limit the rate of outgoing data flow over some other network device. @@ -2541,8 +2540,27 @@ config SHAPER config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. +endif #NETDEVICES + +config NETPOLL + def_bool NETCONSOLE + +config NETPOLL_RX + bool "Netpoll support for trapping incoming packets" + default n + depends on NETPOLL + +config NETPOLL_TRAP + bool "Netpoll traffic trapping" + default n + depends on NETPOLL + +config NET_POLL_CONTROLLER + def_bool NETPOLL + +endmenu |
