diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 82 |
1 files changed, 64 insertions, 18 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a672866..af40ff4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -912,6 +912,24 @@ config DM9000 To compile this driver as a module, choose M here. The module will be called dm9000. +config ENC28J60 + tristate "ENC28J60 support" + depends on EXPERIMENTAL && SPI && NET_ETHERNET + select CRC32 + ---help--- + Support for the Microchip EN28J60 ethernet chip. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called enc28j60. + +config ENC28J60_WRITEVERIFY + bool "Enable write verify" + depends on ENC28J60 + ---help--- + Enable the verify after the buffer write useful for debugging purpose. + If unsure, say N. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 @@ -1584,6 +1602,18 @@ config 8139_OLD_RX_RESET experience problems, you can enable this option to restore the old RX-reset behavior. If unsure, say N. +config R6040 + tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This is a driver for the R6040 Fast Ethernet MACs found in the + the RDC R-321x System-on-chips. + + To compile this driver as a module, choose M here: the module + will be called r6040. This is recommended. + config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI @@ -1785,7 +1815,7 @@ config DE620 config SGISEEQ tristate "SGI Seeq ethernet controller support" - depends on SGI_IP22 + depends on SGI_HAS_SEEQ help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. @@ -1989,6 +2019,28 @@ config IP1000 To compile this driver as a module, choose M here: the module will be called ipg. This is recommended. +config IGB + tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called igb. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS @@ -2560,6 +2612,7 @@ config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC64 && PCI select PHYLIB + select INET_LRO help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. @@ -2585,6 +2638,16 @@ config TEHUTI help Tehuti Networks 10G Ethernet NIC +config BNX2X + tristate "Broadcom NetXtremeII 10Gb support" + depends on PCI + select ZLIB_INFLATE + help + This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + + endif # NETDEV_10000 source "drivers/net/tokenring/Kconfig" @@ -3015,23 +3078,6 @@ config NET_FC adaptor below. You also should have said Y to "SCSI support" and "SCSI generic support". -config SHAPER - tristate "Traffic Shaper (OBSOLETE)" - depends on EXPERIMENTAL - ---help--- - The traffic shaper is a virtual network device that allows you to - limit the rate of outgoing data flow over some other network device. - The traffic that you want to slow down can then be routed through - these virtual devices. See - <file:Documentation/networking/shaper.txt> for more information. - - An alternative to this traffic shaper are traffic schedulers which - you'll get if you say Y to "QoS and/or fair queuing" in - "Networking options". - - To compile this driver as a module, choose M here: the module - will be called shaper. If unsure, say N. - config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" depends on EXPERIMENTAL |
