diff options
Diffstat (limited to 'drivers/net/3c501.c')
| -rw-r--r-- | drivers/net/3c501.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c index 9e1c03e..5420f6d 100644 --- a/drivers/net/3c501.c +++ b/drivers/net/3c501.c @@ -399,7 +399,7 @@ static void el_timeout(struct net_device *dev) * as we may still be attempting to retrieve the last RX packet buffer. * * When a transmit times out we dump the card into control mode and just - * start again. It happens enough that it isnt worth logging. + * start again. It happens enough that it isn't worth logging. * * We avoid holding the spin locks when doing the packet load to the board. * The device is very slow, and its DMA mode is even slower. If we held the @@ -499,7 +499,7 @@ static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev) * * Handle the ether interface interrupts. The 3c501 needs a lot more * hand holding than most cards. In particular we get a transmit interrupt - * with a collision error because the board firmware isnt capable of rewinding + * with a collision error because the board firmware isn't capable of rewinding * its own transmit buffer pointers. It can however count to 16 for us. * * On the receive side the card is also very dumb. It has no buffering to @@ -732,7 +732,7 @@ static void el_receive(struct net_device *dev) * el_reset: Reset a 3c501 card * @dev: The 3c501 card about to get zapped * - * Even resetting a 3c501 isnt simple. When you activate reset it loses all + * Even resetting a 3c501 isn't simple. When you activate reset it loses all * its configuration. You must hold the lock when doing this. The function * cannot take the lock itself as it is callable from the irq handler. */ |
