summaryrefslogtreecommitdiffstats
path: root/drivers/net/3c501.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/3c501.c')
-rw-r--r--drivers/net/3c501.c6
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 9e1c03e..5420f6d 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -399,7 +399,7 @@ static void el_timeout(struct net_device *dev)
* as we may still be attempting to retrieve the last RX packet buffer.
*
* When a transmit times out we dump the card into control mode and just
- * start again. It happens enough that it isnt worth logging.
+ * start again. It happens enough that it isn't worth logging.
*
* We avoid holding the spin locks when doing the packet load to the board.
* The device is very slow, and its DMA mode is even slower. If we held the
@@ -499,7 +499,7 @@ static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
*
* Handle the ether interface interrupts. The 3c501 needs a lot more
* hand holding than most cards. In particular we get a transmit interrupt
- * with a collision error because the board firmware isnt capable of rewinding
+ * with a collision error because the board firmware isn't capable of rewinding
* its own transmit buffer pointers. It can however count to 16 for us.
*
* On the receive side the card is also very dumb. It has no buffering to
@@ -732,7 +732,7 @@ static void el_receive(struct net_device *dev)
* el_reset: Reset a 3c501 card
* @dev: The 3c501 card about to get zapped
*
- * Even resetting a 3c501 isnt simple. When you activate reset it loses all
+ * Even resetting a 3c501 isn't simple. When you activate reset it loses all
* its configuration. You must hold the lock when doing this. The function
* cannot take the lock itself as it is callable from the irq handler.
*/
OpenPOWER on IntegriCloud