diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/cmdlinepart.c | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 2 | ||||
-rw-r--r-- | drivers/mtd/inftlcore.c | 11 | ||||
-rw-r--r-- | drivers/mtd/maps/Kconfig | 7 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/integrator-flash.c | 22 | ||||
-rw-r--r-- | drivers/mtd/maps/sbc8240.c | 250 | ||||
-rw-r--r-- | drivers/mtd/mtd_blkdevs.c | 6 | ||||
-rw-r--r-- | drivers/mtd/mtdblock.c | 16 | ||||
-rw-r--r-- | drivers/mtd/mtdcore.c | 7 | ||||
-rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/omap2.c | 7 | ||||
-rw-r--r-- | drivers/mtd/nftlcore.c | 16 | ||||
-rw-r--r-- | drivers/mtd/onenand/omap2.c | 3 | ||||
-rw-r--r-- | drivers/mtd/ubi/build.c | 6 | ||||
-rw-r--r-- | drivers/mtd/ubi/debug.c | 2 | ||||
-rw-r--r-- | drivers/mtd/ubi/debug.h | 7 | ||||
-rw-r--r-- | drivers/mtd/ubi/eba.c | 1 | ||||
-rw-r--r-- | drivers/mtd/ubi/gluebi.c | 1 | ||||
-rw-r--r-- | drivers/mtd/ubi/io.c | 157 | ||||
-rw-r--r-- | drivers/mtd/ubi/scan.c | 25 | ||||
-rw-r--r-- | drivers/mtd/ubi/scan.h | 2 | ||||
-rw-r--r-- | drivers/mtd/ubi/ubi-media.h | 12 | ||||
-rw-r--r-- | drivers/mtd/ubi/ubi.h | 6 | ||||
-rw-r--r-- | drivers/mtd/ubi/wl.c | 8 |
25 files changed, 189 insertions, 390 deletions
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 5011fa7..1479da6 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -194,7 +194,7 @@ static struct mtd_partition * newpart(char *s, parts[this_part].name = extra_mem; extra_mem += name_len + 1; - dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n", + dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n", this_part, parts[this_part].name, parts[this_part].offset, diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 59c4612..ae5fe91 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ +#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 73f0522..d8cf29c 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -226,7 +226,7 @@ static u16 INFTL_findfreeblock(struct INFTLrecord *inftl, int desperate) if (!desperate && inftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "INFTL: there are too few free " "EUNs (%d)\n", inftl->numfreeEUNs); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -281,7 +281,8 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned silly = MAX_LOOPS; while (thisEUN < inftl->nb_blocks) { for (block = 0; block < inftl->EraseSize/SECTORSIZE; block ++) { - if ((BlockMap[block] != 0xffff) || BlockDeleted[block]) + if ((BlockMap[block] != BLOCK_NIL) || + BlockDeleted[block]) continue; if (inftl_read_oob(mtd, (thisEUN * inftl->EraseSize) @@ -525,7 +526,7 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) if (!silly--) { printk(KERN_WARNING "INFTL: infinite loop in " "Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -549,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, 0xffff); + thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); /* * Hopefully we free something, lets try again. @@ -631,7 +632,7 @@ hitused: printk(KERN_WARNING "INFTL: error folding to make room for Virtual " "Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0b98654..7a58bd5 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -284,13 +284,6 @@ config MTD_L440GX BE VERY CAREFUL. -config MTD_SBC8240 - tristate "Flash device on SBC8240" - depends on MTD_JEDECPROBE && 8260 - help - Flash access on the SBC8240 board from Wind River. See - <http://www.windriver.com/products/sbc8240/> - config MTD_TQM8XXL tristate "CFI Flash device mapped on TQM8XXL" depends on MTD_CFI && TQM8xxL diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 8bae7f9..5beb066 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_MTD_UCLINUX) += uclinux.o obj-$(CONFIG_MTD_NETtel) += nettel.o obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o obj-$(CONFIG_MTD_H720X) += h720x-flash.o -obj-$(CONFIG_MTD_SBC8240) += sbc8240.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_IXP2000) += ixp2000.o obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index b08a798..2aac41b 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -42,10 +42,8 @@ #include <mach/hardware.h> #include <asm/system.h> -#define SUBDEV_NAME_SIZE (BUS_ID_SIZE + 2) - struct armflash_subdev_info { - char name[SUBDEV_NAME_SIZE]; + char *name; struct mtd_info *mtd; struct map_info map; struct flash_platform_data *plat; @@ -134,6 +132,8 @@ static void armflash_subdev_remove(struct armflash_subdev_info *subdev) map_destroy(subdev->mtd); if (subdev->map.virt) iounmap(subdev->map.virt); + kfree(subdev->name); + subdev->name = NULL; release_mem_region(subdev->map.phys, subdev->map.size); } @@ -177,16 +177,22 @@ static int armflash_probe(struct platform_device *dev) if (nr == 1) /* No MTD concatenation, just use the default name */ - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s", - dev_name(&dev->dev)); + subdev->name = kstrdup(dev_name(&dev->dev), GFP_KERNEL); else - snprintf(subdev->name, SUBDEV_NAME_SIZE, "%s-%d", - dev_name(&dev->dev), i); + subdev->name = kasprintf(GFP_KERNEL, "%s-%d", + dev_name(&dev->dev), i); + if (!subdev->name) { + err = -ENOMEM; + break; + } subdev->plat = plat; err = armflash_subdev_probe(subdev, res); - if (err) + if (err) { + kfree(subdev->name); + subdev->name = NULL; break; + } } info->nr_subdev = i; diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c index d5374cd..e69de29 100644 --- a/drivers/mtd/maps/sbc8240.c +++ b/drivers/mtd/maps/sbc8240.c @@ -1,250 +0,0 @@ -/* - * Handle mapping of the flash memory access routines on the SBC8240 board. - * - * Carolyn Smith, Tektronix, Inc. - * - * This code is GPLed - */ - -/* - * The SBC8240 has 2 flash banks. - * Bank 0 is a 512 KiB AMD AM29F040B; 8 x 64 KiB sectors. - * It contains the U-Boot code (7 sectors) and the environment (1 sector). - * Bank 1 is 4 x 1 MiB AMD AM29LV800BT; 15 x 64 KiB sectors, 1 x 32 KiB sector, - * 2 x 8 KiB sectors, 1 x 16 KiB sectors. - * Both parts are JEDEC compatible. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <asm/io.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/cfi.h> - -#ifdef CONFIG_MTD_PARTITIONS -#include <linux/mtd/partitions.h> -#endif - -#define DEBUG - -#ifdef DEBUG -# define debugk(fmt,args...) printk(fmt ,##args) -#else -# define debugk(fmt,args...) -#endif - - -#define WINDOW_ADDR0 0xFFF00000 /* 512 KiB */ -#define WINDOW_SIZE0 0x00080000 -#define BUSWIDTH0 1 - -#define WINDOW_ADDR1 0xFF000000 /* 4 MiB */ -#define WINDOW_SIZE1 0x00400000 -#define BUSWIDTH1 8 - -#define MSG_PREFIX "sbc8240:" /* prefix for our printk()'s */ -#define MTDID "sbc8240-%d" /* for mtdparts= partitioning */ - - -static struct map_info sbc8240_map[2] = { - { - .name = "sbc8240 Flash Bank #0", - .size = WINDOW_SIZE0, - .bankwidth = BUSWIDTH0, - }, - { - .name = "sbc8240 Flash Bank #1", - .size = WINDOW_SIZE1, - .bankwidth = BUSWIDTH1, - } -}; - -#define NUM_FLASH_BANKS ARRAY_SIZE(sbc8240_map) - -/* - * The following defines the partition layout of SBC8240 boards. - * - * See include/linux/mtd/partitions.h for definition of the - * mtd_partition structure. - * - * The *_max_flash_size is the maximum possible mapped flash size - * which is not necessarily the actual flash size. It must correspond - * to the value specified in the mapping definition defined by the - * "struct map_desc *_io_desc" for the corresponding machine. - */ - -#ifdef CONFIG_MTD_PARTITIONS - -static struct mtd_partition sbc8240_uboot_partitions [] = { - /* Bank 0 */ - { - .name = "U-boot", /* U-Boot Firmware */ - .offset = 0, - .size = 0x00070000, /* 7 x 64 KiB sectors */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "environment", /* U-Boot environment */ - .offset = 0x00070000, - .size = 0x00010000, /* 1 x 64 KiB sector */ - }, -}; - -static struct mtd_partition sbc8240_fs_partitions [] = { - { - .name = "jffs", /* JFFS filesystem */ - .offset = 0, - .size = 0x003C0000, /* 4 * 15 * 64KiB */ - }, - { - .name = "tmp32", - .offset = 0x003C0000, - .size = 0x00020000, /* 4 * 32KiB */ - }, - { - .name = "tmp8a", - .offset = 0x003E0000, - .size = 0x00008000, /* 4 * 8KiB */ - }, - { - .name = "tmp8b", - .offset = 0x003E8000, - .size = 0x00008000, /* 4 * 8KiB */ - }, - { - .name = "tmp16", - .offset = 0x003F0000, - .size = 0x00010000, /* 4 * 16KiB */ - } -}; - -/* trivial struct to describe partition information */ -struct mtd_part_def -{ - int nums; - unsigned char *type; - struct mtd_partition* mtd_part; -}; - -static struct mtd_info *sbc8240_mtd[NUM_FLASH_BANKS]; -static struct mtd_part_def sbc8240_part_banks[NUM_FLASH_BANKS]; - - -#endif /* CONFIG_MTD_PARTITIONS */ - - -static int __init init_sbc8240_mtd (void) -{ - static struct _cjs { - u_long addr; - u_long size; - } pt[NUM_FLASH_BANKS] = { - { - .addr = WINDOW_ADDR0, - .size = WINDOW_SIZE0 - }, - { - .addr = WINDOW_ADDR1, - .size = WINDOW_SIZE1 - }, - }; - - int devicesfound = 0; - int i,j; - - for (i = 0; i < NUM_FLASH_BANKS; i++) { - printk (KERN_NOTICE MSG_PREFIX - "Probing 0x%08lx at 0x%08lx\n", pt[i].size, pt[i].addr); - - sbc8240_map[i].map_priv_1 = - (unsigned long) ioremap (pt[i].addr, pt[i].size); - if (!sbc8240_map[i].map_priv_1) { - printk (MSG_PREFIX "failed to ioremap\n"); - for (j = 0; j < i; j++) { - iounmap((void *) sbc8240_map[j].map_priv_1); - sbc8240_map[j].map_priv_1 = 0; - } - return -EIO; - } - simple_map_init(&sbc8240_mtd[i]); - - sbc8240_mtd[i] = do_map_probe("jedec_probe", &sbc8240_map[i]); - - if (sbc8240_mtd[i]) { - sbc8240_mtd[i]->module = THIS_MODULE; - devicesfound++; - } else { - if (sbc8240_map[i].map_priv_1) { - iounmap((void *) sbc8240_map[i].map_priv_1); - sbc8240_map[i].map_priv_1 = 0; - } - } - } - - if (!devicesfound) { - printk(KERN_NOTICE MSG_PREFIX - "No suppported flash chips found!\n"); - return -ENXIO; - } - -#ifdef CONFIG_MTD_PARTITIONS - sbc8240_part_banks[0].mtd_part = sbc8240_uboot_partitions; - sbc8240_part_banks[0].type = "static image"; - sbc8240_part_banks[0].nums = ARRAY_SIZE(sbc8240_uboot_partitions); - sbc8240_part_banks[1].mtd_part = sbc8240_fs_partitions; - sbc8240_part_banks[1].type = "static file system"; - sbc8240_part_banks[1].nums = ARRAY_SIZE(sbc8240_fs_partitions); - - for (i = 0; i < NUM_FLASH_BANKS; i++) { - - if (!sbc8240_mtd[i]) continue; - if (sbc8240_part_banks[i].nums == 0) { - printk (KERN_NOTICE MSG_PREFIX - "No partition info available, registering whole device\n"); - add_mtd_device(sbc8240_mtd[i]); - } else { - printk (KERN_NOTICE MSG_PREFIX - "Using %s partition definition\n", sbc8240_part_banks[i].mtd_part->name); - add_mtd_partitions (sbc8240_mtd[i], - sbc8240_part_banks[i].mtd_part, - sbc8240_part_banks[i].nums); - } - } -#else - printk(KERN_NOTICE MSG_PREFIX - "Registering %d flash banks at once\n", devicesfound); - - for (i = 0; i < devicesfound; i++) { - add_mtd_device(sbc8240_mtd[i]); - } -#endif /* CONFIG_MTD_PARTITIONS */ - - return devicesfound == 0 ? -ENXIO : 0; -} - -static void __exit cleanup_sbc8240_mtd (void) -{ - int i; - - for (i = 0; i < NUM_FLASH_BANKS; i++) { - if (sbc8240_mtd[i]) { - del_mtd_device (sbc8240_mtd[i]); - map_destroy (sbc8240_mtd[i]); - } - if (sbc8240_map[i].map_priv_1) { - iounmap ((void *) sbc8240_map[i].map_priv_1); - sbc8240_map[i].map_priv_1 = 0; - } - } -} - -module_init (init_sbc8240_mtd); -module_exit (cleanup_sbc8240_mtd); - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR ("Carolyn Smith <carolyn.smith@tektronix.com>"); -MODULE_DESCRIPTION ("MTD map driver for SBC8240 boards"); - diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index c3f6265..7baba40 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -144,7 +144,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) struct mtd_blktrans_ops *tr = dev->tr; int ret = -ENODEV; - if (!try_module_get(dev->mtd->owner)) + if (!get_mtd_device(NULL, dev->mtd->index)) goto out; if (!try_module_get(tr->owner)) @@ -158,7 +158,7 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) ret = 0; if (tr->open && (ret = tr->open(dev))) { dev->mtd->usecount--; - module_put(dev->mtd->owner); + put_mtd_device(dev->mtd); out_tr: module_put(tr->owner); } @@ -177,7 +177,7 @@ static int blktrans_release(struct gendisk *disk, fmode_t mode) if (!ret) { dev->mtd->usecount--; - module_put(dev->mtd->owner); + put_mtd_device(dev->mtd); module_put(tr->owner); } diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 208c6fa..77db5ce 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -29,6 +29,8 @@ static struct mtdblk_dev { enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state; } *mtdblks[MAX_MTD_DEVICES]; +static struct mutex mtdblks_lock; + /* * Cache stuff... * @@ -270,15 +272,19 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n"); + mutex_lock(&mtdblks_lock); if (mtdblks[dev]) { mtdblks[dev]->count++; + mutex_unlock(&mtdblks_lock); return 0; } /* OK, it's not open. Create cache info for it */ mtdblk = kzalloc(sizeof(struct mtdblk_dev), GFP_KERNEL); - if (!mtdblk) + if (!mtdblk) { + mutex_unlock(&mtdblks_lock); return -ENOMEM; + } mtdblk->count = 1; mtdblk->mtd = mtd; @@ -291,6 +297,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) } mtdblks[dev] = mtdblk; + mutex_unlock(&mtdblks_lock); DEBUG(MTD_DEBUG_LEVEL1, "ok\n"); @@ -304,6 +311,8 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) DEBUG(MTD_DEBUG_LEVEL1, "mtdblock_release\n"); + mutex_lock(&mtdblks_lock); + mutex_lock(&mtdblk->cache_mutex); write_cached_data(mtdblk); mutex_unlock(&mtdblk->cache_mutex); @@ -316,6 +325,9 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) vfree(mtdblk->cache_data); kfree(mtdblk); } + + mutex_unlock(&mtdblks_lock); + DEBUG(MTD_DEBUG_LEVEL1, "ok\n"); return 0; @@ -376,6 +388,8 @@ static struct mtd_blktrans_ops mtdblock_tr = { static int __init init_mtdblock(void) { + mutex_init(&mtdblks_lock); + return register_mtd_blktrans(&mtdblock_tr); } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index fac54a3..00ebf7a 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -65,8 +65,8 @@ static void mtd_release(struct device *dev) static int mtd_cls_suspend(struct device *dev, pm_message_t state) { struct mtd_info *mtd = dev_to_mtd(dev); - - if (mtd->suspend) + + if (mtd && mtd->suspend) return mtd->suspend(mtd); else return 0; @@ -76,7 +76,7 @@ static int mtd_cls_resume(struct device *dev) { struct mtd_info *mtd = dev_to_mtd(dev); - if (mtd->resume) + if (mtd && mtd->resume) mtd->resume(mtd); return 0; } @@ -298,6 +298,7 @@ int add_mtd_device(struct mtd_info *mtd) mtd->dev.class = &mtd_class; mtd->dev.devt = MTD_DEVT(i); dev_set_name(&mtd->dev, "mtd%d", i); + dev_set_drvdata(&mtd->dev, mtd); if (device_register(&mtd->dev) != 0) { mtd_table[i] = NULL; break; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 2802992..20c828b 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -534,7 +534,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) &num_partitions); if ((!partitions) || (num_partitions == 0)) { - printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n"); + printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n"); res = ENXIO; goto err_no_partitions; } diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 0cd76f8..ebd07e95 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -11,6 +11,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/sched.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -541,7 +543,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); unsigned long timeo = jiffies; - int status, state = this->state; + int status = NAND_STATUS_FAIL, state = this->state; if (state == FL_ERASING) timeo += (HZ * 400) / 1000; @@ -556,8 +558,9 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) while (time_before(jiffies, timeo)) { status = __raw_readb(this->IO_ADDR_R); - if (!(status & 0x40)) + if (status & NAND_STATUS_READY) break; + cond_resched(); } return status; } diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index e3f8495..fb86cac 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -208,7 +208,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) /* Normally, we force a fold to happen before we run out of free blocks completely */ if (!desperate && nftl->numfreeEUNs < 2) { DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); - return 0xffff; + return BLOCK_NIL; } /* Scan for a free block */ @@ -230,11 +230,11 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) printk("Argh! No free blocks found! LastFreeEUN = %d, " "FirstEUN = %d\n", nftl->LastFreeEUN, le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); - return 0xffff; + return BLOCK_NIL; } } while (pot != nftl->LastFreeEUN); - return 0xffff; + return BLOCK_NIL; } static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) @@ -431,7 +431,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p /* add the header so that it is now a valid chain */ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); - oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; + oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = BLOCK_NIL; nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, 8, &retlen, (char *)&oob.u); @@ -515,7 +515,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) if (ChainLength < 2) { printk(KERN_WARNING "No Virtual Unit Chains available for folding. " "Failing request\n"); - return 0xffff; + return BLOCK_NIL; } return NFTL_foldchain (nftl, LongestChain, pendingblock); @@ -578,7 +578,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } /* Skip to next block in chain */ @@ -601,7 +601,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) //u16 startEUN = nftl->EUNtable[thisVUC]; //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); - writeEUN = NFTL_makefreeblock(nftl, 0xffff); + writeEUN = NFTL_makefreeblock(nftl, BLOCK_NIL); if (writeEUN == BLOCK_NIL) { /* OK, we accept that the above comment is @@ -673,7 +673,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", thisVUC); - return 0xffff; + return BLOCK_NIL; } static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 38d656b..0108ed4 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -266,7 +266,7 @@ static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area) if (ONENAND_CURRENT_BUFFERRAM(this)) { if (area == ONENAND_DATARAM) - return mtd->writesize; + return this->writesize; if (area == ONENAND_SPARERAM) return mtd->oobsize; } @@ -770,6 +770,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) } iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); + gpmc_cs_free(c->gpmc_cs); kfree(c); return 0; diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 286ed59..e1f7d0a 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -657,6 +657,11 @@ static int io_init(struct ubi_device *ubi) if (ubi->mtd->block_isbad && ubi->mtd->block_markbad) ubi->bad_allowed = 1; + if (ubi->mtd->type == MTD_NORFLASH) { + ubi_assert(ubi->mtd->writesize == 1); + ubi->nor_flash = 1; + } + ubi->min_io_size = ubi->mtd->writesize; ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft; @@ -996,6 +1001,7 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) ubi_msg("number of PEBs reserved for bad PEB handling: %d", ubi->beb_rsvd_pebs); ubi_msg("max/mean erase counter: %d/%d", ubi->max_ec, ubi->mean_ec); + ubi_msg("image sequence number: %d", ubi->image_seq); /* * The below lock makes sure we do not race with 'ubi_thread()' which diff --git a/drivers/mtd/ubi/debug.c b/drivers/mtd/ubi/debug.c index c0ed60e..54b0186 100644 --- a/drivers/mtd/ubi/debug.c +++ b/drivers/mtd/ubi/debug.c @@ -44,6 +44,8 @@ void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr) be32_to_cpu(ec_hdr->vid_hdr_offset)); printk(KERN_DEBUG "\tdata_offset %d\n", be32_to_cpu(ec_hdr->data_offset)); + printk(KERN_DEBUG "\timage_seq %d\n", + be32_to_cpu(ec_hdr->image_seq)); printk(KERN_DEBUG "\thdr_crc %#08x\n", be32_to_cpu(ec_hdr->hdr_crc)); printk(KERN_DEBUG "erase counter header hexdump:\n"); diff --git a/drivers/mtd/ubi/debug.h b/drivers/mtd/ubi/debug.h index 13777e5..a4da7a0 100644 --- a/drivers/mtd/ubi/debug.h +++ b/drivers/mtd/ubi/debug.h @@ -93,6 +93,12 @@ void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req); #define UBI_IO_DEBUG 0 #endif +#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID +int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len); +#else +#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 +#endif + #ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT #define DBG_DISABLE_BGT 1 #else @@ -167,6 +173,7 @@ static inline int ubi_dbg_is_erase_failure(void) #define ubi_dbg_is_bitflip() 0 #define ubi_dbg_is_write_failure() 0 #define ubi_dbg_is_erase_failure() 0 +#define ubi_dbg_check_all_ff(ubi, pnum, offset, len) 0 #endif /* !CONFIG_MTD_UBI_DEBUG */ #endif /* !__UBI_DEBUG_H__ */ diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 0f2034c..e4d9ef0 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1254,6 +1254,7 @@ out_free: if (!ubi->volumes[i]) continue; kfree(ubi->volumes[i]->eba_tbl); + ubi->volumes[i]->eba_tbl = NULL; } return err; } diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 95aaac0..b5e478f 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -332,6 +332,7 @@ static int gluebi_create(struct ubi_device_info *di, } gluebi->vol_id = vi->vol_id; + gluebi->ubi_num = vi->ubi_num; mtd->type = MTD_UBIVOLUME; if (!di->ro_mode) mtd->flags = MTD_WRITEABLE; diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c index effaff2..4cb6992 100644 --- a/drivers/mtd/ubi/io.c +++ b/drivers/mtd/ubi/io.c @@ -98,17 +98,12 @@ static int paranoid_check_ec_hdr(const struct ubi_device *ubi, int pnum, static int paranoid_check_peb_vid_hdr(const struct ubi_device *ubi, int pnum); static int paranoid_check_vid_hdr(const struct ubi_device *ubi, int pnum, const struct ubi_vid_hdr *vid_hdr); -static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset, - int len); -static int paranoid_check_empty(struct ubi_device *ubi, int pnum); #else #define paranoid_check_not_bad(ubi, pnum) 0 #define paranoid_check_peb_ec_hdr(ubi, pnum) 0 #define paranoid_check_ec_hdr(ubi, pnum, ec_hdr) 0 #define paranoid_check_peb_vid_hdr(ubi, pnum) 0 #define paranoid_check_vid_hdr(ubi, pnum, vid_hdr) 0 -#define paranoid_check_all_ff(ubi, pnum, offset, len) 0 -#define paranoid_check_empty(ubi, pnum) 0 #endif /** @@ -244,7 +239,7 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, return err > 0 ? -EINVAL : err; /* The area we are writing to has to contain all 0xFF bytes */ - err = paranoid_check_all_ff(ubi, pnum, offset, len); + err = ubi_dbg_check_all_ff(ubi, pnum, offset, len); if (err) return err > 0 ? -EINVAL : err; @@ -271,8 +266,8 @@ int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, addr = (loff_t)pnum * ubi->peb_size + offset; err = ubi->mtd->write(ubi->mtd, addr, len, &written, buf); if (err) { - ubi_err("error %d while writing %d bytes to PEB %d:%d, written" - " %zd bytes", err, len, pnum, offset, written); + ubi_err("error %d while writing %d bytes to PEB %d:%d, written " + "%zd bytes", err, len, pnum, offset, written); ubi_dbg_dump_stack(); } else ubi_assert(written == len); @@ -350,7 +345,7 @@ retry: return -EIO; } - err = paranoid_check_all_ff(ubi, pnum, 0, ubi->peb_size); + err = ubi_dbg_check_all_ff(ubi, pnum, 0, ubi->peb_size); if (err) return err > 0 ? -EINVAL : err; @@ -459,6 +454,54 @@ out: } /** + * nor_erase_prepare - prepare a NOR flash PEB for erasure. + * @ubi: UBI device description object + * @pnum: physical eraseblock number to prepare + * + * NOR flash, or at least some of them, have peculiar embedded PEB erasure + * algorithm: the PEB is first filled with zeroes, then it is erased. And + * filling with zeroes starts from the end of the PEB. This was observed with + * Spansion S29GL512N NOR flash. + * + * This means that in case of a power cut we may end up with intact data at the + * beginning of the PEB, and all zeroes at the end of PEB. In other words, the + * EC and VID headers are OK, but a large chunk of data at the end of PEB is + * zeroed. This makes UBI mistakenly treat this PEB as used and associate it + * with an LEB, which leads to subsequent failures (e.g., UBIFS fails). + * + * This function is called before erasing NOR PEBs and it zeroes out EC and VID + * magic numbers in order to invalidate them and prevent the failures. Returns + * zero in case of success and a negative error code in case of failure. + */ +static int nor_erase_prepare(struct ubi_device *ubi, int pnum) +{ + int err; + size_t written; + loff_t addr; + uint32_t data = 0; + + addr = (loff_t)pnum * ubi->peb_size; + err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data); + if (err) { + ubi_err("error %d while writing 4 bytes to PEB %d:%d, written " + "%zd bytes", err, pnum, 0, written); + ubi_dbg_dump_stack(); + return err; + } + + addr += ubi->vid_hdr_aloffset; + err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data); + if (err) { + ubi_err("error %d while writing 4 bytes to PEB %d:%d, written " + "%zd bytes", err, pnum, ubi->vid_hdr_aloffset, written); + ubi_dbg_dump_stack(); + return err; + } + + return 0; +} + +/** * ubi_io_sync_erase - synchronously erase a physical eraseblock. * @ubi: UBI device description object * @pnum: physical eraseblock number to erase @@ -489,6 +532,12 @@ int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture) return -EROFS; } + if (ubi->nor_flash) { + err = nor_erase_prepare(ubi, pnum); + if (err) + return err; + } + if (torture) { ret = torture_peb(ubi, pnum); if (ret < 0) @@ -672,11 +721,6 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, if (read_err != -EBADMSG && check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) { /* The physical eraseblock is supposedly empty */ - err = paranoid_check_all_ff(ubi, pnum, 0, - ubi->peb_size); - if (err) - return err > 0 ? UBI_IO_BAD_EC_HDR : err; - if (verbose) ubi_warn("no EC header found at PEB %d, " "only 0xFF bytes", pnum); @@ -752,6 +796,7 @@ int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, ec_hdr->version = UBI_VERSION; ec_hdr->vid_hdr_offset = cpu_to_be32(ubi->vid_hdr_offset); ec_hdr->data_offset = cpu_to_be32(ubi->leb_start); + ec_hdr->image_seq = cpu_to_be32(ubi->image_seq); crc = crc32(UBI_CRC32_INIT, ec_hdr, UBI_EC_HDR_SIZE_CRC); ec_hdr->hdr_crc = cpu_to_be32(crc); @@ -947,15 +992,6 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, if (read_err != -EBADMSG && check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) { /* The physical eraseblock is supposedly free */ - - /* - * The below is just a paranoid check, it has to be - * compiled out if paranoid checks are disabled. - */ - err = paranoid_check_empty(ubi, pnum); - if (err) - return err > 0 ? UBI_IO_BAD_VID_HDR : err; - if (verbose) ubi_warn("no VID header found at PEB %d, " "only 0xFF bytes", pnum); @@ -1229,7 +1265,7 @@ exit: } /** - * paranoid_check_all_ff - check that a region of flash is empty. + * ubi_dbg_check_all_ff - check that a region of flash is empty. * @ubi: UBI device description object * @pnum: the physical eraseblock number to check * @offset: the starting offset within the physical eraseblock to check @@ -1239,8 +1275,7 @@ exit: * @offset of the physical eraseblock @pnum, %1 if not, and a negative error * code if an error occurred. */ -static int paranoid_check_all_ff(struct ubi_device *ubi, int pnum, int offset, - int len) +int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len) { size_t read; int err; @@ -1276,74 +1311,4 @@ error: return err; } -/** - * paranoid_check_empty - whether a PEB is empty. - * @ubi: UBI device description object - * @pnum: the physical eraseblock number to check - * - * This function makes sure PEB @pnum is empty, which means it contains only - * %0xFF data bytes. Returns zero if the PEB is empty, %1 if not, and a - * negative error code in case of failure. - * - * Empty PEBs have the EC header, and do not have the VID header. The caller of - * this function should have already made sure the PEB does not have the VID - * header. However, this function re-checks that, because it is possible that - * the header and data has already been written to the PEB. - * - * Let's consider a possible scenario. Suppose there are 2 tasks - A and B. - * Task A is in 'wear_leveling_worker()'. It is reading VID header of PEB X to - * find which LEB it corresponds to. PEB X is currently unmapped, and has no - * VID header. Task B is trying to write to PEB X. - * - * Task A: in 'ubi_io_read_vid_hdr()': reads the VID header from PEB X. The - * read data contain all 0xFF bytes; - * Task B: writes VID header and some data to PEB X; - * Task A: assumes PEB X is empty, calls 'paranoid_check_empty()'. And if we - * do not re-read the VID header, and do not cancel the checking if it - * is there, we fail. - */ -static int paranoid_check_empty(struct ubi_device *ubi, int pnum) -{ - int err, offs = ubi->vid_hdr_aloffset, len = ubi->vid_hdr_alsize; - size_t read; - uint32_t magic; - const struct ubi_vid_hdr *vid_hdr; - - mutex_lock(&ubi->dbg_buf_mutex); - err = ubi->mtd->read(ubi->mtd, offs, len, &read, ubi->dbg_peb_buf); - if (err && err != -EUCLEAN) { - ubi_err("error %d while reading %d bytes from PEB %d:%d, " - "read %zd bytes", err, len, pnum, offs, read); - goto error; - } - - vid_hdr = ubi->dbg_peb_buf; - magic = be32_to_cpu(vid_hdr->magic); - if (magic == UBI_VID_HDR_MAGIC) - /* The PEB contains VID header, so it is not empty */ - goto out; - - err = check_pattern(ubi->dbg_peb_buf, 0xFF, len); - if (err == 0) { - ubi_err("flash region at PEB %d:%d, length %d does not " - "contain all 0xFF bytes", pnum, offs, len); - goto fail; - } - -out: - mutex_unlock(&ubi->dbg_buf_mutex); - return 0; - -fail: - ubi_err("paranoid check failed for PEB %d", pnum); - ubi_msg("hex dump of the %d-%d region", offs, offs + len); - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, - ubi->dbg_peb_buf, len, 1); - err = 1; -error: - ubi_dbg_dump_stack(); - mutex_unlock(&ubi->dbg_buf_mutex); - return err; -} - #endif /* CONFIG_MTD_UBI_DEBUG_PARANOID */ diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index c3d653b..b847745 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -757,6 +757,8 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, si->is_empty = 0; if (!ec_corr) { + int image_seq; + /* Make sure UBI version is OK */ if (ech->version != UBI_VERSION) { ubi_err("this UBI version is %d, image version is %d", @@ -778,6 +780,29 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } + + /* + * Make sure that all PEBs have the same image sequence number. + * This allows us to detect situations when users flash UBI + * images incorrectly, so that the flash has the new UBI image + * and leftovers from the old one. This feature was added + * relatively recently, and the sequence number was always + * zero, because old UBI implementations always set it to zero. + * For this reasons, we do not panic if some PEBs have zero + * sequence number, while other PEBs have non-zero sequence + * number. + */ + image_seq = be32_to_cpu(ech->image_seq); + if (!si->image_seq_set) { + ubi->image_seq = image_seq; + si->image_seq_set = 1; + } else if (ubi->image_seq && ubi->image_seq != image_seq) { + ubi_err("bad image sequence number %d in PEB %d, " + "expected %d", image_seq, pnum, ubi->image_seq); + ubi_dbg_dump_ec_hdr(ech); + return -EINVAL; + } + } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index 61df208..1017cf1 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -102,6 +102,7 @@ struct ubi_scan_volume { * @mean_ec: mean erase counter value * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec + * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -124,6 +125,7 @@ struct ubi_scan_info { int mean_ec; uint64_t ec_sum; int ec_count; + int image_seq_set; }; struct ubi_device; diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h index 8419fdc..503ea9b 100644 --- a/drivers/mtd/ubi/ubi-media.h +++ b/drivers/mtd/ubi/ubi-media.h @@ -129,6 +129,7 @@ enum { * @ec: the erase counter * @vid_hdr_offset: where the VID header starts * @data_offset: where the user data start + * @image_seq: image sequence number * @padding2: reserved for future, zeroes * @hdr_crc: erase counter header CRC checksum * @@ -144,6 +145,14 @@ enum { * volume identifier header and user data, relative to the beginning of the * physical eraseblock. These values have to be the same for all physical * eraseblocks. + * + * The @image_seq field is used to validate a UBI image that has been prepared + * for a UBI device. The @image_seq value can be any value, but it must be the + * same on all eraseblocks. UBI will ensure that all new erase counter headers + * also contain this value, and will check the value when scanning at start-up. + * One way to make use of @image_seq is to increase its value by one every time + * an image is flashed over an existing image, then, if the flashing does not + * complete, UBI will detect the error when scanning. */ struct ubi_ec_hdr { __be32 magic; @@ -152,7 +161,8 @@ struct ubi_ec_hdr { __be64 ec; /* Warning: the current limit is 31-bit anyway! */ __be32 vid_hdr_offset; __be32 data_offset; - __u8 padding2[36]; + __be32 image_seq; + __u8 padding2[32]; __be32 hdr_crc; } __attribute__ ((packed)); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 28acd13..6a5fe96 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -301,6 +301,7 @@ struct ubi_wl_entry; * @vol->readers, @vol->writers, @vol->exclusive, * @vol->ref_count, @vol->mapping and @vol->eba_tbl. * @ref_count: count of references on the UBI device + * @image_seq: image sequence number recorded on EC headers * * @rsvd_pebs: count of reserved physical eraseblocks * @avail_pebs: count of available physical eraseblocks @@ -372,6 +373,7 @@ struct ubi_wl_entry; * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or * not + * @nor_flash: non-zero if working on top of NOR flash * @mtd: MTD device descriptor * * @peb_buf1: a buffer of PEB size used for different purposes @@ -390,6 +392,7 @@ struct ubi_device { struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT]; spinlock_t volumes_lock; int ref_count; + int image_seq; int rsvd_pebs; int avail_pebs; @@ -452,7 +455,8 @@ struct ubi_device { int vid_hdr_offset; int vid_hdr_aloffset; int vid_hdr_shift; - int bad_allowed; + unsigned int bad_allowed:1; + unsigned int nor_flash:1; struct mtd_info *mtd; void *peb_buf1; diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 2b24723..600c722 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -459,6 +459,14 @@ retry: dbg_wl("PEB %d EC %d", e->pnum, e->ec); prot_queue_add(ubi, e); spin_unlock(&ubi->wl_lock); + + err = ubi_dbg_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset, + ubi->peb_size - ubi->vid_hdr_aloffset); + if (err) { + ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum); + return err > 0 ? -EINVAL : err; + } + return e->pnum; } |