diff options
Diffstat (limited to 'drivers/mtd')
31 files changed, 1256 insertions, 723 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 1344ad7..717e904 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -263,6 +263,14 @@ config RFD_FTL http://www.gensw.com/pages/prod/bios/rfd.htm +config SSFDC + bool "NAND SSFDC (SmartMedia) read only translation layer" + depends on MTD + default n + help + This enables read only access to SmartMedia formatted NAND + flash. You can mount it with FAT file system. + source "drivers/mtd/chips/Kconfig" source "drivers/mtd/maps/Kconfig" diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index fc93744..1e36b9a 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_FTL) += ftl.o mtd_blkdevs.o obj-$(CONFIG_NFTL) += nftl.o mtd_blkdevs.o obj-$(CONFIG_INFTL) += inftl.o mtd_blkdevs.o obj-$(CONFIG_RFD_FTL) += rfd_ftl.o mtd_blkdevs.o +obj-$(CONFIG_SSFDC) += ssfdc.o mtd_blkdevs.o nftl-objs := nftlcore.o nftlmount.o inftl-objs := inftlcore.o inftlmount.o diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index a482e89..702ae4c 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -212,6 +212,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param) { mtd->lock = cfi_atmel_lock; mtd->unlock = cfi_atmel_unlock; + mtd->flags |= MTD_STUPID_LOCK; } static struct cfi_fixup cfi_fixup_table[] = { diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 2c01497..354e165 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -4,82 +4,82 @@ * PMC551 PCI Mezzanine Ram Device * * Author: - * Mark Ferrell <mferrell@mvista.com> - * Copyright 1999,2000 Nortel Networks + * Mark Ferrell <mferrell@mvista.com> + * Copyright 1999,2000 Nortel Networks * * License: - * As part of this driver was derived from the slram.c driver it - * falls under the same license, which is GNU General Public - * License v2 + * As part of this driver was derived from the slram.c driver it + * falls under the same license, which is GNU General Public + * License v2 * * Description: - * This driver is intended to support the PMC551 PCI Ram device - * from Ramix Inc. The PMC551 is a PMC Mezzanine module for - * cPCI embedded systems. The device contains a single SROM - * that initially programs the V370PDC chipset onboard the - * device, and various banks of DRAM/SDRAM onboard. This driver - * implements this PCI Ram device as an MTD (Memory Technology - * Device) so that it can be used to hold a file system, or for - * added swap space in embedded systems. Since the memory on - * this board isn't as fast as main memory we do not try to hook - * it into main memory as that would simply reduce performance - * on the system. Using it as a block device allows us to use - * it as high speed swap or for a high speed disk device of some - * sort. Which becomes very useful on diskless systems in the - * embedded market I might add. + * This driver is intended to support the PMC551 PCI Ram device + * from Ramix Inc. The PMC551 is a PMC Mezzanine module for + * cPCI embedded systems. The device contains a single SROM + * that initially programs the V370PDC chipset onboard the + * device, and various banks of DRAM/SDRAM onboard. This driver + * implements this PCI Ram device as an MTD (Memory Technology + * Device) so that it can be used to hold a file system, or for + * added swap space in embedded systems. Since the memory on + * this board isn't as fast as main memory we do not try to hook + * it into main memory as that would simply reduce performance + * on the system. Using it as a block device allows us to use + * it as high speed swap or for a high speed disk device of some + * sort. Which becomes very useful on diskless systems in the + * embedded market I might add. * * Notes: - * Due to what I assume is more buggy SROM, the 64M PMC551 I - * have available claims that all 4 of it's DRAM banks have 64M - * of ram configured (making a grand total of 256M onboard). - * This is slightly annoying since the BAR0 size reflects the - * aperture size, not the dram size, and the V370PDC supplies no - * other method for memory size discovery. This problem is - * mostly only relevant when compiled as a module, as the - * unloading of the module with an aperture size smaller then - * the ram will cause the driver to detect the onboard memory - * size to be equal to the aperture size when the module is - * reloaded. Soooo, to help, the module supports an msize - * option to allow the specification of the onboard memory, and - * an asize option, to allow the specification of the aperture - * size. The aperture must be equal to or less then the memory - * size, the driver will correct this if you screw it up. This - * problem is not relevant for compiled in drivers as compiled - * in drivers only init once. + * Due to what I assume is more buggy SROM, the 64M PMC551 I + * have available claims that all 4 of it's DRAM banks have 64M + * of ram configured (making a grand total of 256M onboard). + * This is slightly annoying since the BAR0 size reflects the + * aperture size, not the dram size, and the V370PDC supplies no + * other method for memory size discovery. This problem is + * mostly only relevant when compiled as a module, as the + * unloading of the module with an aperture size smaller then + * the ram will cause the driver to detect the onboard memory + * size to be equal to the aperture size when the module is + * reloaded. Soooo, to help, the module supports an msize + * option to allow the specification of the onboard memory, and + * an asize option, to allow the specification of the aperture + * size. The aperture must be equal to or less then the memory + * size, the driver will correct this if you screw it up. This + * problem is not relevant for compiled in drivers as compiled + * in drivers only init once. * * Credits: - * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the - * initial example code of how to initialize this device and for - * help with questions I had concerning operation of the device. + * Saeed Karamooz <saeed@ramix.com> of Ramix INC. for the + * initial example code of how to initialize this device and for + * help with questions I had concerning operation of the device. * - * Most of the MTD code for this driver was originally written - * for the slram.o module in the MTD drivers package which - * allows the mapping of system memory into an MTD device. - * Since the PMC551 memory module is accessed in the same - * fashion as system memory, the slram.c code became a very nice - * fit to the needs of this driver. All we added was PCI - * detection/initialization to the driver and automatically figure - * out the size via the PCI detection.o, later changes by Corey - * Minyard set up the card to utilize a 1M sliding apature. + * Most of the MTD code for this driver was originally written + * for the slram.o module in the MTD drivers package which + * allows the mapping of system memory into an MTD device. + * Since the PMC551 memory module is accessed in the same + * fashion as system memory, the slram.c code became a very nice + * fit to the needs of this driver. All we added was PCI + * detection/initialization to the driver and automatically figure + * out the size via the PCI detection.o, later changes by Corey + * Minyard set up the card to utilize a 1M sliding apature. * - * Corey Minyard <minyard@nortelnetworks.com> - * * Modified driver to utilize a sliding aperture instead of - * mapping all memory into kernel space which turned out to - * be very wasteful. - * * Located a bug in the SROM's initialization sequence that - * made the memory unusable, added a fix to code to touch up - * the DRAM some. + * Corey Minyard <minyard@nortelnetworks.com> + * * Modified driver to utilize a sliding aperture instead of + * mapping all memory into kernel space which turned out to + * be very wasteful. + * * Located a bug in the SROM's initialization sequence that + * made the memory unusable, added a fix to code to touch up + * the DRAM some. * * Bugs/FIXME's: - * * MUST fix the init function to not spin on a register - * waiting for it to set .. this does not safely handle busted - * devices that never reset the register correctly which will - * cause the system to hang w/ a reboot being the only chance at - * recover. [sort of fixed, could be better] - * * Add I2C handling of the SROM so we can read the SROM's information - * about the aperture size. This should always accurately reflect the - * onboard memory size. - * * Comb the init routine. It's still a bit cludgy on a few things. + * * MUST fix the init function to not spin on a register + * waiting for it to set .. this does not safely handle busted + * devices that never reset the register correctly which will + * cause the system to hang w/ a reboot being the only chance at + * recover. [sort of fixed, could be better] + * * Add I2C handling of the SROM so we can read the SROM's information + * about the aperture size. This should always accurately reflect the + * onboard memory size. + * * Comb the init routine. It's still a bit cludgy on a few things. */ #include <linux/kernel.h> @@ -105,74 +105,77 @@ static struct mtd_info *pmc551list; -static int pmc551_erase (struct mtd_info *mtd, struct erase_info *instr) +static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; size_t retlen; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, (long)instr->len); + printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr, + (long)instr->len); #endif - end = instr->addr + instr->len - 1; + end = instr->addr + instr->len - 1; - /* Is it past the end? */ - if ( end > mtd->size ) { + /* Is it past the end? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", (long)end, (long)mtd->size); + printk(KERN_DEBUG "pmc551_erase() out of bounds (%ld > %ld)\n", + (long)end, (long)mtd->size); #endif - return -EINVAL; - } - - eoff_hi = end & ~(priv->asize - 1); - soff_hi = instr->addr & ~(priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - soff_lo = instr->addr & (priv->asize - 1); - - pmc551_point (mtd, instr->addr, instr->len, &retlen, &ptr); - - if ( soff_hi == eoff_hi || mtd->size == priv->asize) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memset(ptr, 0xff, instr->len); - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + eoff_hi = end & ~(priv->asize - 1); + soff_hi = instr->addr & ~(priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + soff_lo = instr->addr & (priv->asize - 1); + + pmc551_point(mtd, instr->addr, instr->len, &retlen, &ptr); + + if (soff_hi == eoff_hi || mtd->size == priv->asize) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memset(ptr, 0xff, instr->len); + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_erase() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memset(ptr, 0xff, priv->asize); - if (soff_hi + priv->asize >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd,(priv->base_map0|soff_hi), - priv->asize, &retlen, &ptr); - } - memset (ptr, 0xff, eoff_lo); - } - -out: + memset(ptr, 0xff, priv->asize); + if (soff_hi + priv->asize >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, (priv->base_map0 | soff_hi), + priv->asize, &retlen, &ptr); + } + memset(ptr, 0xff, eoff_lo); + } + + out: instr->state = MTD_ERASE_DONE; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_erase() done\n"); #endif - mtd_erase_callback(instr); - return 0; + mtd_erase_callback(instr); + return 0; } - -static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf) +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char ** mtdbuf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi; - u32 soff_lo; + struct mypriv *priv = mtd->priv; + u32 soff_hi; + u32 soff_lo; #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len); @@ -180,18 +183,19 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t * if (from + len > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", (long)from+len, (long)mtd->size); + printk(KERN_DEBUG "pmc551_point() out of bounds (%ld > %ld)\n", + (long)from + len, (long)mtd->size); #endif return -EINVAL; } - soff_hi = from & ~(priv->asize - 1); - soff_lo = from & (priv->asize - 1); + soff_hi = from & ~(priv->asize - 1); + soff_lo = from & (priv->asize - 1); /* Cheap hack optimization */ - if( priv->curr_map0 != from ) { - pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, - (priv->base_map0 | soff_hi) ); + if (priv->curr_map0 != from) { + pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, + (priv->base_map0 | soff_hi)); priv->curr_map0 = soff_hi; } @@ -200,137 +204,144 @@ static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t * return 0; } - -static void pmc551_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) +static void pmc551_unpoint(struct mtd_info *mtd, u_char * addr, loff_t from, + size_t len) { #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_unpoint()\n"); #endif } - -static int pmc551_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t * retlen, u_char * buf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; - u_char *copyto = buf; + u_char *copyto = buf; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", (long)from, (long)len, (long)priv->asize); + printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n", + (long)from, (long)len, (long)priv->asize); #endif - end = from + len - 1; + end = from + len - 1; - /* Is it past the end? */ - if (end > mtd->size) { + /* Is it past the end? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", (long) end, (long)mtd->size); + printk(KERN_DEBUG "pmc551_read() out of bounds (%ld > %ld)\n", + (long)end, (long)mtd->size); #endif - return -EINVAL; - } - - soff_hi = from & ~(priv->asize - 1); - eoff_hi = end & ~(priv->asize - 1); - soff_lo = from & (priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - - pmc551_point (mtd, from, len, retlen, &ptr); - - if (soff_hi == eoff_hi) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memcpy(copyto, ptr, len); - copyto += len; - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + soff_hi = from & ~(priv->asize - 1); + eoff_hi = end & ~(priv->asize - 1); + soff_lo = from & (priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + + pmc551_point(mtd, from, len, retlen, &ptr); + + if (soff_hi == eoff_hi) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memcpy(copyto, ptr, len); + copyto += len; + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_read() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memcpy(copyto, ptr, priv->asize); - copyto += priv->asize; - if (soff_hi + priv->asize >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); - } - memcpy(copyto, ptr, eoff_lo); - copyto += eoff_lo; - } - -out: + memcpy(copyto, ptr, priv->asize); + copyto += priv->asize; + if (soff_hi + priv->asize >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr); + } + memcpy(copyto, ptr, eoff_lo); + copyto += eoff_lo; + } + + out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_read() done\n"); #endif - *retlen = copyto - buf; - return 0; + *retlen = copyto - buf; + return 0; } -static int pmc551_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t * retlen, const u_char * buf) { - struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ - u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ - unsigned long end; + struct mypriv *priv = mtd->priv; + u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ + unsigned long end; u_char *ptr; - const u_char *copyfrom = buf; - + const u_char *copyfrom = buf; #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", (long)to, (long)len, (long)priv->asize); + printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n", + (long)to, (long)len, (long)priv->asize); #endif - end = to + len - 1; - /* Is it past the end? or did the u32 wrap? */ - if (end > mtd->size ) { + end = to + len - 1; + /* Is it past the end? or did the u32 wrap? */ + if (end > mtd->size) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, size: %ld, to: %ld)\n", (long) end, (long)mtd->size, (long)to); + printk(KERN_DEBUG "pmc551_write() out of bounds (end: %ld, " + "size: %ld, to: %ld)\n", (long)end, (long)mtd->size, + (long)to); #endif - return -EINVAL; - } - - soff_hi = to & ~(priv->asize - 1); - eoff_hi = end & ~(priv->asize - 1); - soff_lo = to & (priv->asize - 1); - eoff_lo = end & (priv->asize - 1); - - pmc551_point (mtd, to, len, retlen, &ptr); - - if (soff_hi == eoff_hi) { - /* The whole thing fits within one access, so just one shot - will do it. */ - memcpy(ptr, copyfrom, len); - copyfrom += len; - } else { - /* We have to do multiple writes to get all the data - written. */ - while (soff_hi != eoff_hi) { + return -EINVAL; + } + + soff_hi = to & ~(priv->asize - 1); + eoff_hi = end & ~(priv->asize - 1); + soff_lo = to & (priv->asize - 1); + eoff_lo = end & (priv->asize - 1); + + pmc551_point(mtd, to, len, retlen, &ptr); + + if (soff_hi == eoff_hi) { + /* The whole thing fits within one access, so just one shot + will do it. */ + memcpy(ptr, copyfrom, len); + copyfrom += len; + } else { + /* We have to do multiple writes to get all the data + written. */ + while (soff_hi != eoff_hi) { #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551_write() soff_hi: %ld, eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); + printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, " + "eoff_hi: %ld\n", (long)soff_hi, (long)eoff_hi); #endif - memcpy(ptr, copyfrom, priv->asize); - copyfrom += priv->asize; - if (soff_hi >= mtd->size) { - goto out; - } - soff_hi += priv->asize; - pmc551_point (mtd, soff_hi, priv->asize, retlen, &ptr); - } - memcpy(ptr, copyfrom, eoff_lo); - copyfrom += eoff_lo; - } - -out: + memcpy(ptr, copyfrom, priv->asize); + copyfrom += priv->asize; + if (soff_hi >= mtd->size) { + goto out; + } + soff_hi += priv->asize; + pmc551_point(mtd, soff_hi, priv->asize, retlen, &ptr); + } + memcpy(ptr, copyfrom, eoff_lo); + copyfrom += eoff_lo; + } + + out: #ifdef CONFIG_MTD_PMC551_DEBUG printk(KERN_DEBUG "pmc551_write() done\n"); #endif - *retlen = copyfrom - buf; - return 0; + *retlen = copyfrom - buf; + return 0; } /* @@ -345,58 +356,58 @@ out: * mechanism * returns the size of the memory region found. */ -static u32 fixup_pmc551 (struct pci_dev *dev) +static u32 fixup_pmc551(struct pci_dev *dev) { #ifdef CONFIG_MTD_PMC551_BUGFIX - u32 dram_data; + u32 dram_data; #endif - u32 size, dcmd, cfg, dtmp; - u16 cmd, tmp, i; + u32 size, dcmd, cfg, dtmp; + u16 cmd, tmp, i; u8 bcmd, counter; - /* Sanity Check */ - if(!dev) { - return -ENODEV; - } + /* Sanity Check */ + if (!dev) { + return -ENODEV; + } /* * Attempt to reset the card * FIXME: Stop Spinning registers */ - counter=0; + counter = 0; /* unlock registers */ - pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5 ); + pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, 0xA5); /* read in old data */ - pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); + pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); /* bang the reset line up and down for a few */ - for(i=0;i<10;i++) { - counter=0; + for (i = 0; i < 10; i++) { + counter = 0; bcmd &= ~0x80; - while(counter++ < 100) { + while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } - counter=0; + counter = 0; bcmd |= 0x80; - while(counter++ < 100) { + while (counter++ < 100) { pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); } } - bcmd |= (0x40|0x20); + bcmd |= (0x40 | 0x20); pci_write_config_byte(dev, PMC551_SYS_CTRL_REG, bcmd); - /* + /* * Take care and turn off the memory on the device while we * tweak the configurations */ - pci_read_config_word(dev, PCI_COMMAND, &cmd); - tmp = cmd & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, tmp); + pci_read_config_word(dev, PCI_COMMAND, &cmd); + tmp = cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, tmp); /* * Disable existing aperture before probing memory size */ pci_read_config_dword(dev, PMC551_PCI_MEM_MAP0, &dcmd); - dtmp=(dcmd|PMC551_PCI_MEM_MAP_ENABLE|PMC551_PCI_MEM_MAP_REG_EN); + dtmp = (dcmd | PMC551_PCI_MEM_MAP_ENABLE | PMC551_PCI_MEM_MAP_REG_EN); pci_write_config_dword(dev, PMC551_PCI_MEM_MAP0, dtmp); /* * Grab old BAR0 config so that we can figure out memory size @@ -407,220 +418,230 @@ static u32 fixup_pmc551 (struct pci_dev *dev) * then write all 1's to the memory space, read back the result into * "size", and then write back all the old config. */ - pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &cfg ); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &cfg); #ifndef CONFIG_MTD_PMC551_BUGFIX - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, ~0 ); - pci_read_config_dword( dev, PCI_BASE_ADDRESS_0, &size ); - size = (size&PCI_BASE_ADDRESS_MEM_MASK); - size &= ~(size-1); - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, ~0); + pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &size); + size = (size & PCI_BASE_ADDRESS_MEM_MASK); + size &= ~(size - 1); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, cfg); #else - /* - * Get the size of the memory by reading all the DRAM size values - * and adding them up. - * - * KLUDGE ALERT: the boards we are using have invalid column and - * row mux values. We fix them here, but this will break other - * memory configurations. - */ - pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); - size = PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); - - pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); - size += PMC551_DRAM_BLK_GET_SIZE(dram_data); - dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); - dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); - pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); - - /* - * Oops .. something went wrong - */ - if( (size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { - return -ENODEV; - } -#endif /* CONFIG_MTD_PMC551_BUGFIX */ - - if ((cfg&PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { - return -ENODEV; + /* + * Get the size of the memory by reading all the DRAM size values + * and adding them up. + * + * KLUDGE ALERT: the boards we are using have invalid column and + * row mux values. We fix them here, but this will break other + * memory configurations. + */ + pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dram_data); + size = PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK0, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK1, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK2, dram_data); + + pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dram_data); + size += PMC551_DRAM_BLK_GET_SIZE(dram_data); + dram_data = PMC551_DRAM_BLK_SET_COL_MUX(dram_data, 0x5); + dram_data = PMC551_DRAM_BLK_SET_ROW_MUX(dram_data, 0x9); + pci_write_config_dword(dev, PMC551_DRAM_BLK3, dram_data); + + /* + * Oops .. something went wrong + */ + if ((size &= PCI_BASE_ADDRESS_MEM_MASK) == 0) { + return -ENODEV; + } +#endif /* CONFIG_MTD_PMC551_BUGFIX */ + + if ((cfg & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) { + return -ENODEV; } - /* - * Precharge Dram - */ - pci_write_config_word( dev, PMC551_SDRAM_MA, 0x0400 ); - pci_write_config_word( dev, PMC551_SDRAM_CMD, 0x00bf ); - - /* - * Wait until command has gone through - * FIXME: register spinning issue - */ - do { pci_read_config_word( dev, PMC551_SDRAM_CMD, &cmd ); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - - /* + /* + * Precharge Dram + */ + pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0400); + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x00bf); + + /* + * Wait until command has gone through + * FIXME: register spinning issue + */ + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + + /* * Turn on auto refresh * The loop is taken directly from Ramix's example code. I assume that * this must be held high for some duration of time, but I can find no * documentation refrencing the reasons why. - */ - for ( i = 1; i<=8 ; i++) { - pci_write_config_word (dev, PMC551_SDRAM_CMD, 0x0df); - - /* - * Make certain command has gone through - * FIXME: register spinning issue - */ - counter=0; - do { pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - } - - pci_write_config_word ( dev, PMC551_SDRAM_MA, 0x0020); - pci_write_config_word ( dev, PMC551_SDRAM_CMD, 0x0ff); - - /* - * Wait until command completes - * FIXME: register spinning issue - */ - counter=0; - do { pci_read_config_word ( dev, PMC551_SDRAM_CMD, &cmd); - if(counter++ > 100)break; - } while ( (PCI_COMMAND_IO) & cmd ); - - pci_read_config_dword ( dev, PMC551_DRAM_CFG, &dcmd); - dcmd |= 0x02000000; - pci_write_config_dword ( dev, PMC551_DRAM_CFG, dcmd); - - /* - * Check to make certain fast back-to-back, if not - * then set it so - */ - pci_read_config_word( dev, PCI_STATUS, &cmd); - if((cmd&PCI_COMMAND_FAST_BACK) == 0) { - cmd |= PCI_COMMAND_FAST_BACK; - pci_write_config_word( dev, PCI_STATUS, cmd); - } - - /* - * Check to make certain the DEVSEL is set correctly, this device - * has a tendancy to assert DEVSEL and TRDY when a write is performed - * to the memory when memory is read-only - */ - if((cmd&PCI_STATUS_DEVSEL_MASK) != 0x0) { - cmd &= ~PCI_STATUS_DEVSEL_MASK; - pci_write_config_word( dev, PCI_STATUS, cmd ); - } - /* - * Set to be prefetchable and put everything back based on old cfg. + */ + for (i = 1; i <= 8; i++) { + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0df); + + /* + * Make certain command has gone through + * FIXME: register spinning issue + */ + counter = 0; + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + } + + pci_write_config_word(dev, PMC551_SDRAM_MA, 0x0020); + pci_write_config_word(dev, PMC551_SDRAM_CMD, 0x0ff); + + /* + * Wait until command completes + * FIXME: register spinning issue + */ + counter = 0; + do { + pci_read_config_word(dev, PMC551_SDRAM_CMD, &cmd); + if (counter++ > 100) + break; + } while ((PCI_COMMAND_IO) & cmd); + + pci_read_config_dword(dev, PMC551_DRAM_CFG, &dcmd); + dcmd |= 0x02000000; + pci_write_config_dword(dev, PMC551_DRAM_CFG, dcmd); + + /* + * Check to make certain fast back-to-back, if not + * then set it so + */ + pci_read_config_word(dev, PCI_STATUS, &cmd); + if ((cmd & PCI_COMMAND_FAST_BACK) == 0) { + cmd |= PCI_COMMAND_FAST_BACK; + pci_write_config_word(dev, PCI_STATUS, cmd); + } + + /* + * Check to make certain the DEVSEL is set correctly, this device + * has a tendancy to assert DEVSEL and TRDY when a write is performed + * to the memory when memory is read-only + */ + if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) { + cmd &= ~PCI_STATUS_DEVSEL_MASK; + pci_write_config_word(dev, PCI_STATUS, cmd); + } + /* + * Set to be prefetchable and put everything back based on old cfg. * it's possible that the reset of the V370PDC nuked the original * setup - */ + */ + /* + cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; + pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); + */ + /* - cfg |= PCI_BASE_ADDRESS_MEM_PREFETCH; - pci_write_config_dword( dev, PCI_BASE_ADDRESS_0, cfg ); - */ - - /* - * Turn PCI memory and I/O bus access back on - */ - pci_write_config_word( dev, PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_IO ); + * Turn PCI memory and I/O bus access back on + */ + pci_write_config_word(dev, PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_IO); #ifdef CONFIG_MTD_PMC551_DEBUG - /* - * Some screen fun - */ - printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at 0x%llx\n", - (size<1024)?size:(size<1048576)?size>>10:size>>20, - (size<1024)?'B':(size<1048576)?'K':'M', - size, ((dcmd&(0x1<<3)) == 0)?"non-":"", - (unsigned long long)((dev->resource[0].start)&PCI_BASE_ADDRESS_MEM_MASK)); - - /* - * Check to see the state of the memory - */ - pci_read_config_dword( dev, PMC551_DRAM_BLK0, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" - "pmc551: DRAM_BLK0 Size: %d at %d\n" - "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK1, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" - "pmc551: DRAM_BLK1 Size: %d at %d\n" - "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK2, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" - "pmc551: DRAM_BLK2 Size: %d at %d\n" - "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_dword( dev, PMC551_DRAM_BLK3, &dcmd ); - printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" - "pmc551: DRAM_BLK3 Size: %d at %d\n" - "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", - (((0x1<<1)&dcmd) == 0)?"RW":"RO", - (((0x1<<0)&dcmd) == 0)?"Off":"On", - PMC551_DRAM_BLK_GET_SIZE(dcmd), - ((dcmd>>20)&0x7FF), ((dcmd>>13)&0x7), ((dcmd>>9)&0xF) ); - - pci_read_config_word( dev, PCI_COMMAND, &cmd ); - printk( KERN_DEBUG "pmc551: Memory Access %s\n", - (((0x1<<1)&cmd) == 0)?"off":"on" ); - printk( KERN_DEBUG "pmc551: I/O Access %s\n", - (((0x1<<0)&cmd) == 0)?"off":"on" ); - - pci_read_config_word( dev, PCI_STATUS, &cmd ); - printk( KERN_DEBUG "pmc551: Devsel %s\n", - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x000)?"Fast": - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x200)?"Medium": - ((PCI_STATUS_DEVSEL_MASK&cmd)==0x400)?"Slow":"Invalid" ); - - printk( KERN_DEBUG "pmc551: %sFast Back-to-Back\n", - ((PCI_COMMAND_FAST_BACK&cmd) == 0)?"Not ":"" ); - - pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd ); - printk( KERN_DEBUG "pmc551: EEPROM is under %s control\n" - "pmc551: System Control Register is %slocked to PCI access\n" - "pmc551: System Control Register is %slocked to EEPROM access\n", - (bcmd&0x1)?"software":"hardware", - (bcmd&0x20)?"":"un", (bcmd&0x40)?"":"un"); + /* + * Some screen fun + */ + printk(KERN_DEBUG "pmc551: %d%c (0x%x) of %sprefetchable memory at " + "0x%llx\n", (size < 1024) ? size : (size < 1048576) ? + size >> 10 : size >> 20, + (size < 1024) ? 'B' : (size < 1048576) ? 'K' : 'M', size, + ((dcmd & (0x1 << 3)) == 0) ? "non-" : "", + (unsigned long long)pci_resource_start(dev, 0)); + + /* + * Check to see the state of the memory + */ + pci_read_config_dword(dev, PMC551_DRAM_BLK0, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n" + "pmc551: DRAM_BLK0 Size: %d at %d\n" + "pmc551: DRAM_BLK0 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK1, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n" + "pmc551: DRAM_BLK1 Size: %d at %d\n" + "pmc551: DRAM_BLK1 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK2, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n" + "pmc551: DRAM_BLK2 Size: %d at %d\n" + "pmc551: DRAM_BLK2 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_dword(dev, PMC551_DRAM_BLK3, &dcmd); + printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n" + "pmc551: DRAM_BLK3 Size: %d at %d\n" + "pmc551: DRAM_BLK3 Row MUX: %d, Col MUX: %d\n", + (((0x1 << 1) & dcmd) == 0) ? "RW" : "RO", + (((0x1 << 0) & dcmd) == 0) ? "Off" : "On", + PMC551_DRAM_BLK_GET_SIZE(dcmd), + ((dcmd >> 20) & 0x7FF), ((dcmd >> 13) & 0x7), + ((dcmd >> 9) & 0xF)); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + printk(KERN_DEBUG "pmc551: Memory Access %s\n", + (((0x1 << 1) & cmd) == 0) ? "off" : "on"); + printk(KERN_DEBUG "pmc551: I/O Access %s\n", + (((0x1 << 0) & cmd) == 0) ? "off" : "on"); + + pci_read_config_word(dev, PCI_STATUS, &cmd); + printk(KERN_DEBUG "pmc551: Devsel %s\n", + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x000) ? "Fast" : + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x200) ? "Medium" : + ((PCI_STATUS_DEVSEL_MASK & cmd) == 0x400) ? "Slow" : "Invalid"); + + printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n", + ((PCI_COMMAND_FAST_BACK & cmd) == 0) ? "Not " : ""); + + pci_read_config_byte(dev, PMC551_SYS_CTRL_REG, &bcmd); + printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n" + "pmc551: System Control Register is %slocked to PCI access\n" + "pmc551: System Control Register is %slocked to EEPROM access\n", + (bcmd & 0x1) ? "software" : "hardware", + (bcmd & 0x20) ? "" : "un", (bcmd & 0x40) ? "" : "un"); #endif - return size; + return size; } /* * Kernel version specific module stuffages */ - MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mark Ferrell <mferrell@mvista.com>"); MODULE_DESCRIPTION(PMC551_VERSION); @@ -628,11 +649,11 @@ MODULE_DESCRIPTION(PMC551_VERSION); /* * Stuff these outside the ifdef so as to not bust compiled in driver support */ -static int msize=0; +static int msize = 0; #if defined(CONFIG_MTD_PMC551_APERTURE_SIZE) -static int asize=CONFIG_MTD_PMC551_APERTURE_SIZE +static int asize = CONFIG_MTD_PMC551_APERTURE_SIZE #else -static int asize=0; +static int asize = 0; #endif module_param(msize, int, 0); @@ -645,164 +666,174 @@ MODULE_PARM_DESC(asize, "aperture size, must be <= memsize [1-1024]"); */ static int __init init_pmc551(void) { - struct pci_dev *PCI_Device = NULL; - struct mypriv *priv; - int count, found=0; - struct mtd_info *mtd; - u32 length = 0; - - if(msize) { - msize = (1 << (ffs(msize) - 1))<<20; - if (msize > (1<<30)) { - printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", msize); + struct pci_dev *PCI_Device = NULL; + struct mypriv *priv; + int count, found = 0; + struct mtd_info *mtd; + u32 length = 0; + + if (msize) { + msize = (1 << (ffs(msize) - 1)) << 20; + if (msize > (1 << 30)) { + printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n", + msize); return -EINVAL; } } - if(asize) { - asize = (1 << (ffs(asize) - 1))<<20; - if (asize > (1<<30) ) { - printk(KERN_NOTICE "pmc551: Invalid aperture size [%d]\n", asize); + if (asize) { + asize = (1 << (ffs(asize) - 1)) << 20; + if (asize > (1 << 30)) { + printk(KERN_NOTICE "pmc551: Invalid aperture size " + "[%d]\n", asize); return -EINVAL; } } - printk(KERN_INFO PMC551_VERSION); - - /* - * PCU-bus chipset probe. - */ - for( count = 0; count < MAX_MTD_DEVICES; count++ ) { - - if ((PCI_Device = pci_find_device(PCI_VENDOR_ID_V3_SEMI, - PCI_DEVICE_ID_V3_SEMI_V370PDC, - PCI_Device ) ) == NULL) { - break; - } - - printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", - (unsigned long long)PCI_Device->resource[0].start); - - /* - * The PMC551 device acts VERY weird if you don't init it - * first. i.e. it will not correctly report devsel. If for - * some reason the sdram is in a wrote-protected state the - * device will DEVSEL when it is written to causing problems - * with the oldproc.c driver in - * some kernels (2.2.*) - */ - if((length = fixup_pmc551(PCI_Device)) <= 0) { - printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); - break; - } + printk(KERN_INFO PMC551_VERSION); + + /* + * PCU-bus chipset probe. + */ + for (count = 0; count < MAX_MTD_DEVICES; count++) { + + if ((PCI_Device = pci_get_device(PCI_VENDOR_ID_V3_SEMI, + PCI_DEVICE_ID_V3_SEMI_V370PDC, + PCI_Device)) == NULL) { + break; + } + + printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n", + (unsigned long long)pci_resource_start(PCI_Device, 0)); + + /* + * The PMC551 device acts VERY weird if you don't init it + * first. i.e. it will not correctly report devsel. If for + * some reason the sdram is in a wrote-protected state the + * device will DEVSEL when it is written to causing problems + * with the oldproc.c driver in + * some kernels (2.2.*) + */ + if ((length = fixup_pmc551(PCI_Device)) <= 0) { + printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n"); + break; + } /* * This is needed until the driver is capable of reading the * onboard I2C SROM to discover the "real" memory size. */ - if(msize) { + if (msize) { length = msize; - printk(KERN_NOTICE "pmc551: Using specified memory size 0x%x\n", length); + printk(KERN_NOTICE "pmc551: Using specified memory " + "size 0x%x\n", length); } else { msize = length; } - mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); - if (!mtd) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); - break; - } - - memset(mtd, 0, sizeof(struct mtd_info)); - - priv = kmalloc (sizeof(struct mypriv), GFP_KERNEL); - if (!priv) { - printk(KERN_NOTICE "pmc551: Cannot allocate new MTD device.\n"); - kfree(mtd); - break; - } - memset(priv, 0, sizeof(*priv)); - mtd->priv = priv; - priv->dev = PCI_Device; - - if(asize > length) { - printk(KERN_NOTICE "pmc551: reducing aperture size to fit %dM\n",length>>20); + mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!mtd) { + printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " + "device.\n"); + break; + } + + priv = kzalloc(sizeof(struct mypriv), GFP_KERNEL); + if (!priv) { + printk(KERN_NOTICE "pmc551: Cannot allocate new MTD " + "device.\n"); + kfree(mtd); + break; + } + mtd->priv = priv; + priv->dev = PCI_Device; + + if (asize > length) { + printk(KERN_NOTICE "pmc551: reducing aperture size to " + "fit %dM\n", length >> 20); priv->asize = asize = length; } else if (asize == 0 || asize == length) { - printk(KERN_NOTICE "pmc551: Using existing aperture size %dM\n", length>>20); + printk(KERN_NOTICE "pmc551: Using existing aperture " + "size %dM\n", length >> 20); priv->asize = asize = length; } else { - printk(KERN_NOTICE "pmc551: Using specified aperture size %dM\n", asize>>20); + printk(KERN_NOTICE "pmc551: Using specified aperture " + "size %dM\n", asize >> 20); priv->asize = asize; } - priv->start = ioremap(((PCI_Device->resource[0].start) - & PCI_BASE_ADDRESS_MEM_MASK), - priv->asize); + priv->start = pci_iomap(PCI_Device, 0, priv->asize); if (!priv->start) { printk(KERN_NOTICE "pmc551: Unable to map IO space\n"); - kfree(mtd->priv); - kfree(mtd); + kfree(mtd->priv); + kfree(mtd); break; } - #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551: setting aperture to %d\n", - ffs(priv->asize>>20)-1); + printk(KERN_DEBUG "pmc551: setting aperture to %d\n", + ffs(priv->asize >> 20) - 1); #endif - priv->base_map0 = ( PMC551_PCI_MEM_MAP_REG_EN - | PMC551_PCI_MEM_MAP_ENABLE - | (ffs(priv->asize>>20)-1)<<4 ); - priv->curr_map0 = priv->base_map0; - pci_write_config_dword ( priv->dev, PMC551_PCI_MEM_MAP0, - priv->curr_map0 ); + priv->base_map0 = (PMC551_PCI_MEM_MAP_REG_EN + | PMC551_PCI_MEM_MAP_ENABLE + | (ffs(priv->asize >> 20) - 1) << 4); + priv->curr_map0 = priv->base_map0; + pci_write_config_dword(priv->dev, PMC551_PCI_MEM_MAP0, + priv->curr_map0); #ifdef CONFIG_MTD_PMC551_DEBUG - printk( KERN_DEBUG "pmc551: aperture set to %d\n", - (priv->base_map0 & 0xF0)>>4 ); + printk(KERN_DEBUG "pmc551: aperture set to %d\n", + (priv->base_map0 & 0xF0) >> 4); #endif - mtd->size = msize; - mtd->flags = MTD_CAP_RAM; - mtd->erase = pmc551_erase; - mtd->read = pmc551_read; - mtd->write = pmc551_write; - mtd->point = pmc551_point; - mtd->unpoint = pmc551_unpoint; - mtd->type = MTD_RAM; - mtd->name = "PMC551 RAM board"; - mtd->erasesize = 0x10000; - mtd->writesize = 1; - mtd->owner = THIS_MODULE; - - if (add_mtd_device(mtd)) { - printk(KERN_NOTICE "pmc551: Failed to register new device\n"); - iounmap(priv->start); - kfree(mtd->priv); - kfree(mtd); - break; - } - printk(KERN_NOTICE "Registered pmc551 memory device.\n"); - printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", - priv->asize>>20, - priv->start, - priv->start + priv->asize); - printk(KERN_NOTICE "Total memory is %d%c\n", - (length<1024)?length: - (length<1048576)?length>>10:length>>20, - (length<1024)?'B':(length<1048576)?'K':'M'); + mtd->size = msize; + mtd->flags = MTD_CAP_RAM; + mtd->erase = pmc551_erase; + mtd->read = pmc551_read; + mtd->write = pmc551_write; + mtd->point = pmc551_point; + mtd->unpoint = pmc551_unpoint; + mtd->type = MTD_RAM; + mtd->name = "PMC551 RAM board"; + mtd->erasesize = 0x10000; + mtd->writesize = 1; + mtd->owner = THIS_MODULE; + + if (add_mtd_device(mtd)) { + printk(KERN_NOTICE "pmc551: Failed to register new " + "device\n"); + pci_iounmap(PCI_Device, priv->start); + kfree(mtd->priv); + kfree(mtd); + break; + } + + /* Keep a reference as the add_mtd_device worked */ + pci_dev_get(PCI_Device); + + printk(KERN_NOTICE "Registered pmc551 memory device.\n"); + printk(KERN_NOTICE "Mapped %dM of memory from 0x%p to 0x%p\n", + priv->asize >> 20, + priv->start, priv->start + priv->asize); + printk(KERN_NOTICE "Total memory is %d%c\n", + (length < 1024) ? length : + (length < 1048576) ? length >> 10 : length >> 20, + (length < 1024) ? 'B' : (length < 1048576) ? 'K' : 'M'); priv->nextpmc551 = pmc551list; pmc551list = mtd; found++; - } + } + + /* Exited early, reference left over */ + if (PCI_Device) + pci_dev_put(PCI_Device); - if( !pmc551list ) { - printk(KERN_NOTICE "pmc551: not detected\n"); - return -ENODEV; - } else { + if (!pmc551list) { + printk(KERN_NOTICE "pmc551: not detected\n"); + return -ENODEV; + } else { printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found); - return 0; + return 0; } } @@ -811,23 +842,24 @@ static int __init init_pmc551(void) */ static void __exit cleanup_pmc551(void) { - int found=0; - struct mtd_info *mtd; + int found = 0; + struct mtd_info *mtd; struct mypriv *priv; - while((mtd=pmc551list)) { + while ((mtd = pmc551list)) { priv = mtd->priv; pmc551list = priv->nextpmc551; - if(priv->start) { - printk (KERN_DEBUG "pmc551: unmapping %dM starting at 0x%p\n", - priv->asize>>20, priv->start); - iounmap (priv->start); + if (priv->start) { + printk(KERN_DEBUG "pmc551: unmapping %dM starting at " + "0x%p\n", priv->asize >> 20, priv->start); + pci_iounmap(priv->dev, priv->start); } + pci_dev_put(priv->dev); - kfree (mtd->priv); - del_mtd_device (mtd); - kfree (mtd); + kfree(mtd->priv); + del_mtd_device(mtd); + kfree(mtd); found++; } diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 64d1b6a..24747bd 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -447,14 +447,6 @@ config MTD_DC21285 21285 bridge used with Intel's StrongARM processors. More info at <http://www.intel.com/design/bridge/docs/21285_documentation.htm>. -config MTD_IQ80310 - tristate "CFI Flash device mapped on the XScale IQ80310 board" - depends on MTD_CFI && ARCH_IQ80310 - help - This enables access routines for the flash chips on the Intel XScale - IQ80310 evaluation board. If you have one of these boards and would - like to use the flash chips on it, say 'Y'. - config MTD_IXP4XX tristate "CFI Flash device mapped on Intel IXP4xx based systems" depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index ab71f17..191c192 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o obj-$(CONFIG_MTD_DC21285) += dc21285.o obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o -obj-$(CONFIG_MTD_IQ80310) += iq80310.o obj-$(CONFIG_MTD_L440GX) += l440gx.o obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o obj-$(CONFIG_MTD_ICHXROM) += ichxrom.o diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c index 447955b..797caff 100644 --- a/drivers/mtd/maps/amd76xrom.c +++ b/drivers/mtd/maps/amd76xrom.c @@ -57,6 +57,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window) /* Disable writes through the rom window */ pci_read_config_byte(window->pdev, 0x40, &byte); pci_write_config_byte(window->pdev, 0x40, byte & ~1); + pci_dev_put(window->pdev); } /* Free all of the mtd devices */ @@ -91,7 +92,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev, struct amd76xrom_map_info *map = NULL; unsigned long map_top; - /* Remember the pci dev I find the window in */ + /* Remember the pci dev I find the window in - already have a ref */ window->pdev = pdev; /* Assume the rom window is properly setup, and find it's size */ @@ -302,7 +303,7 @@ static int __init init_amd76xrom(void) struct pci_device_id *id; pdev = NULL; for(id = amd76xrom_pci_tbl; id->vendor; id++) { - pdev = pci_find_device(id->vendor, id->device, NULL); + pdev = pci_get_device(id->vendor, id->device, NULL); if (pdev) { break; } diff --git a/drivers/mtd/maps/arctic-mtd.c b/drivers/mtd/maps/arctic-mtd.c index d95ae58..642d96b 100644 --- a/drivers/mtd/maps/arctic-mtd.c +++ b/drivers/mtd/maps/arctic-mtd.c @@ -96,6 +96,8 @@ static struct mtd_partition arctic_partitions[PARTITIONS] = { static int __init init_arctic_mtd(void) { + int err = 0; + printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR); arctic_mtd_map.virt = ioremap(PADDR, SIZE); @@ -109,12 +111,20 @@ init_arctic_mtd(void) printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8); arctic_mtd = do_map_probe("cfi_probe", &arctic_mtd_map); - if (!arctic_mtd) + if (!arctic_mtd) { + iounmap((void *) arctic_mtd_map.virt); return -ENXIO; + } arctic_mtd->owner = THIS_MODULE; - return add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS); + err = add_mtd_partitions(arctic_mtd, arctic_partitions, PARTITIONS); + if (err) { + printk("%s: add_mtd_partitions failed\n", NAME); + iounmap((void *) arctic_mtd_map.virt); + } + + return err; } static void __exit diff --git a/drivers/mtd/maps/beech-mtd.c b/drivers/mtd/maps/beech-mtd.c index 5df7361..a64b1a5 100644 --- a/drivers/mtd/maps/beech-mtd.c +++ b/drivers/mtd/maps/beech-mtd.c @@ -72,6 +72,8 @@ static struct mtd_partition beech_partitions[2] = { static int __init init_beech_mtd(void) { + int err = 0; + printk("%s: 0x%08x at 0x%08x\n", NAME, SIZE, PADDR); beech_mtd_map.virt = ioremap(PADDR, SIZE); @@ -86,12 +88,20 @@ init_beech_mtd(void) printk("%s: probing %d-bit flash bus\n", NAME, BUSWIDTH * 8); beech_mtd = do_map_probe("cfi_probe", &beech_mtd_map); - if (!beech_mtd) + if (!beech_mtd) { + iounmap((void *) beech_mtd_map.virt); return -ENXIO; + } beech_mtd->owner = THIS_MODULE; - return add_mtd_partitions(beech_mtd, beech_partitions, 2); + err = add_mtd_partitions(beech_mtd, beech_partitions, 2); + if (err) { + printk("%s: add_mtd_partitions failed\n", NAME); + iounmap((void *) beech_mtd_map.virt); + } + + return err; } static void __exit diff --git a/drivers/mtd/maps/cstm_mips_ixx.c b/drivers/mtd/maps/cstm_mips_ixx.c index aa56def..d6bef10 100644 --- a/drivers/mtd/maps/cstm_mips_ixx.c +++ b/drivers/mtd/maps/cstm_mips_ixx.c @@ -171,7 +171,14 @@ int __init init_cstm_mips_ixx(void) cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr; cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size); if (!cstm_mips_ixx_map[i].virt) { + int j = 0; printk(KERN_WARNING "Failed to ioremap\n"); + for (j = 0; j < i; j++) { + if (cstm_mips_ixx_map[j].virt) { + iounmap((void *)cstm_mips_ixx_map[j].virt); + cstm_mips_ixx_map[j].virt = 0; + } + } return -EIO; } cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name; @@ -204,8 +211,15 @@ int __init init_cstm_mips_ixx(void) cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd; add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions); } - else - return -ENXIO; + else { + for (i = 0; i < PHYSMAP_NUMBER; i++) { + if (cstm_mips_ixx_map[i].virt) { + iounmap((void *)cstm_mips_ixx_map[i].virt); + cstm_mips_ixx_map[i].virt = 0; + } + } + return -ENXIO; + } } return 0; } diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c index 641e1dd..1488bb9 100644 --- a/drivers/mtd/maps/ebony.c +++ b/drivers/mtd/maps/ebony.c @@ -108,6 +108,7 @@ int __init init_ebony(void) ARRAY_SIZE(ebony_small_partitions)); } else { printk("map probe failed for flash\n"); + iounmap(ebony_small_map.virt); return -ENXIO; } @@ -117,6 +118,7 @@ int __init init_ebony(void) if (!ebony_large_map.virt) { printk("Failed to ioremap flash\n"); + iounmap(ebony_small_map.virt); return -EIO; } @@ -129,6 +131,8 @@ int __init init_ebony(void) ARRAY_SIZE(ebony_large_partitions)); } else { printk("map probe failed for flash\n"); + iounmap(ebony_small_map.virt); + iounmap(ebony_large_map.virt); return -ENXIO; } diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c index c6bf4e1..7c50c27 100644 --- a/drivers/mtd/maps/fortunet.c +++ b/drivers/mtd/maps/fortunet.c @@ -218,8 +218,11 @@ int __init init_fortunet(void) map_regions[ix].map_info.size); if(!map_regions[ix].map_info.virt) { + int j = 0; printk(MTD_FORTUNET_PK "%s flash failed to ioremap!\n", map_regions[ix].map_info.name); + for (j = 0 ; j < ix; j++) + iounmap(map_regions[j].map_info.virt); return -ENXIO; } simple_map_init(&map_regions[ix].map_info); diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index db4b570..2bb3e636 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c @@ -61,6 +61,7 @@ static void ichxrom_cleanup(struct ichxrom_window *window) /* Disable writes through the rom window */ pci_read_config_word(window->pdev, BIOS_CNTL, &word); pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1); + pci_dev_put(window->pdev); /* Free all of the mtd devices */ list_for_each_entry_safe(map, scratch, &window->maps, list) { @@ -355,7 +356,7 @@ static int __init init_ichxrom(void) pdev = NULL; for (id = ichxrom_pci_tbl; id->vendor; id++) { - pdev = pci_find_device(id->vendor, id->device, NULL); + pdev = pci_get_device(id->vendor, id->device, NULL); if (pdev) { break; } diff --git a/drivers/mtd/maps/iq80310.c b/drivers/mtd/maps/iq80310.c deleted file mode 100644 index 62d9e87..0000000 --- a/drivers/mtd/maps/iq80310.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * $Id: iq80310.c,v 1.21 2005/11/07 11:14:27 gleixner Exp $ - * - * Mapping for the Intel XScale IQ80310 evaluation board - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - - -#define WINDOW_ADDR 0 -#define WINDOW_SIZE 8*1024*1024 -#define BUSWIDTH 1 - -static struct mtd_info *mymtd; - -static struct map_info iq80310_map = { - .name = "IQ80310 flash", - .size = WINDOW_SIZE, - .bankwidth = BUSWIDTH, - .phys = WINDOW_ADDR -}; - -static struct mtd_partition iq80310_partitions[4] = { - { - .name = "Firmware", - .size = 0x00080000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - },{ - .name = "Kernel", - .size = 0x000a0000, - .offset = 0x00080000, - },{ - .name = "Filesystem", - .size = 0x00600000, - .offset = 0x00120000 - },{ - .name = "RedBoot", - .size = 0x000e0000, - .offset = 0x00720000, - .mask_flags = MTD_WRITEABLE - } -}; - -static struct mtd_info *mymtd; -static struct mtd_partition *parsed_parts; -static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; - -static int __init init_iq80310(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - int parsed_nr_parts = 0; - int ret; - - iq80310_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); - if (!iq80310_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; - } - simple_map_init(&iq80310_map); - - mymtd = do_map_probe("cfi_probe", &iq80310_map); - if (!mymtd) { - iounmap((void *)iq80310_map.virt); - return -ENXIO; - } - mymtd->owner = THIS_MODULE; - - ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0); - - if (ret > 0) - parsed_nr_parts = ret; - - if (parsed_nr_parts > 0) { - parts = parsed_parts; - nb_parts = parsed_nr_parts; - } else { - parts = iq80310_partitions; - nb_parts = ARRAY_SIZE(iq80310_partitions); - } - add_mtd_partitions(mymtd, parts, nb_parts); - return 0; -} - -static void __exit cleanup_iq80310(void) -{ - if (mymtd) { - del_mtd_partitions(mymtd); - map_destroy(mymtd); - kfree(parsed_parts); - } - if (iq80310_map.virt) - iounmap((void *)iq80310_map.virt); -} - -module_init(init_iq80310); -module_exit(cleanup_iq80310); - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>"); -MODULE_DESCRIPTION("MTD map driver for Intel XScale IQ80310 evaluation board"); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 986c586..7a828e3 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -253,7 +253,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) /* Use the fast version */ info->map.write = ixp4xx_write16, - err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0); + err = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start); if (err > 0) { err = add_mtd_partitions(info->mtd, info->partitions, err); if(err) diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c index 6b784ef..67620ad 100644 --- a/drivers/mtd/maps/l440gx.c +++ b/drivers/mtd/maps/l440gx.c @@ -61,14 +61,17 @@ static int __init init_l440gx(void) struct resource *pm_iobase; __u16 word; - dev = pci_find_device(PCI_VENDOR_ID_INTEL, + dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, NULL); - pm_dev = pci_find_device(PCI_VENDOR_ID_INTEL, + pm_dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, NULL); + pci_dev_put(dev); + if (!dev || !pm_dev) { printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n"); + pci_dev_put(pm_dev); return -ENODEV; } @@ -76,6 +79,7 @@ static int __init init_l440gx(void) if (!l440gx_map.virt) { printk(KERN_WARNING "Failed to ioremap L440GX flash region\n"); + pci_dev_put(pm_dev); return -ENOMEM; } simple_map_init(&l440gx_map); @@ -99,8 +103,12 @@ static int __init init_l440gx(void) pm_iobase->start += iobase & ~1; pm_iobase->end += iobase & ~1; + pci_dev_put(pm_dev); + /* Allocate the resource region */ if (pci_assign_resource(pm_dev, PIIXE_IOBASE_RESOURCE) != 0) { + pci_dev_put(dev); + pci_dev_put(pm_dev); printk(KERN_WARNING "Could not allocate pm iobase resource\n"); iounmap(l440gx_map.virt); return -ENXIO; diff --git a/drivers/mtd/maps/lasat.c b/drivers/mtd/maps/lasat.c index 1c13d2d..e343763 100644 --- a/drivers/mtd/maps/lasat.c +++ b/drivers/mtd/maps/lasat.c @@ -79,6 +79,7 @@ static int __init init_lasat(void) return 0; } + iounmap(lasat_map.virt); return -ENXIO; } @@ -89,6 +90,7 @@ static void __exit cleanup_lasat(void) map_destroy(lasat_mtd); } if (lasat_map.virt) { + iounmap(lasat_map.virt); lasat_map.virt = 0; } } diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index 0994b5b..198e840 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -277,6 +277,7 @@ int __init nettel_init(void) nettel_amd_map.virt = ioremap_nocache(amdaddr, maxsize); if (!nettel_amd_map.virt) { printk("SNAPGEAR: failed to ioremap() BOOTCS\n"); + iounmap(nettel_mmcrp); return(-EIO); } simple_map_init(&nettel_amd_map); @@ -337,7 +338,8 @@ int __init nettel_init(void) nettel_amd_map.virt = NULL; #else /* Only AMD flash supported */ - return(-ENXIO); + rc = -ENXIO; + goto out_unmap2; #endif } @@ -361,14 +363,15 @@ int __init nettel_init(void) nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize); if (!nettel_intel_map.virt) { printk("SNAPGEAR: failed to ioremap() ROMCS1\n"); - return(-EIO); + rc = -EIO; + goto out_unmap2; } simple_map_init(&nettel_intel_map); intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map); if (!intel_mtd) { - iounmap(nettel_intel_map.virt); - return(-ENXIO); + rc = -ENXIO; + goto out_unmap1; } /* Set PAR to the detected size */ @@ -394,13 +397,14 @@ int __init nettel_init(void) nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize); if (!nettel_intel_map.virt) { printk("SNAPGEAR: failed to ioremap() ROMCS1/2\n"); - return(-EIO); + rc = -EIO; + goto out_unmap2; } intel_mtd = do_map_probe("cfi_probe", &nettel_intel_map); if (! intel_mtd) { - iounmap((void *) nettel_intel_map.virt); - return(-ENXIO); + rc = -ENXIO; + goto out_unmap1; } intel1size = intel_mtd->size - intel0size; @@ -456,6 +460,18 @@ int __init nettel_init(void) #endif return(rc); + +#ifdef CONFIG_MTD_CFI_INTELEXT +out_unmap1: + iounmap((void *) nettel_intel_map.virt); +#endif + +out_unmap2: + iounmap(nettel_mmcrp); + iounmap(nettel_amd_map.virt); + + return(rc); + } /****************************************************************************/ @@ -469,6 +485,10 @@ void __exit nettel_cleanup(void) del_mtd_partitions(amd_mtd); map_destroy(amd_mtd); } + if (nettel_mmcrp) { + iounmap(nettel_mmcrp); + nettel_mmcrp = NULL; + } if (nettel_amd_map.virt) { iounmap(nettel_amd_map.virt); nettel_amd_map.virt = NULL; diff --git a/drivers/mtd/maps/ocotea.c b/drivers/mtd/maps/ocotea.c index 2f07602..5522eac 100644 --- a/drivers/mtd/maps/ocotea.c +++ b/drivers/mtd/maps/ocotea.c @@ -97,6 +97,7 @@ int __init init_ocotea(void) ARRAY_SIZE(ocotea_small_partitions)); } else { printk("map probe failed for flash\n"); + iounmap(ocotea_small_map.virt); return -ENXIO; } @@ -106,6 +107,7 @@ int __init init_ocotea(void) if (!ocotea_large_map.virt) { printk("Failed to ioremap flash\n"); + iounmap(ocotea_small_map.virt); return -EIO; } @@ -118,6 +120,8 @@ int __init init_ocotea(void) ARRAY_SIZE(ocotea_large_partitions)); } else { printk("map probe failed for flash\n"); + iounmap(ocotea_small_map.virt); + iounmap(ocotea_large_map.virt); return -ENXIO; } diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index c861134..995347b 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -602,6 +602,10 @@ static int pcmciamtd_config(struct pcmcia_device *link) ret = pcmcia_request_configuration(link, &link->conf); if(ret != CS_SUCCESS) { cs_error(link, RequestConfiguration, ret); + if (dev->win_base) { + iounmap(dev->win_base); + dev->win_base = NULL; + } return -ENODEV; } diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 7799a25..bc7cc71 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -158,9 +158,42 @@ err_out: return err; } +#ifdef CONFIG_PM +static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state) +{ + struct physmap_flash_info *info = platform_get_drvdata(dev); + int ret = 0; + + if (info) + ret = info->mtd->suspend(info->mtd); + + return ret; +} + +static int physmap_flash_resume(struct platform_device *dev) +{ + struct physmap_flash_info *info = platform_get_drvdata(dev); + if (info) + info->mtd->resume(info->mtd); + return 0; +} + +static void physmap_flash_shutdown(struct platform_device *dev) +{ + struct physmap_flash_info *info = platform_get_drvdata(dev); + if (info && info->mtd->suspend(info->mtd) == 0) + info->mtd->resume(info->mtd); +} +#endif + static struct platform_driver physmap_flash_driver = { .probe = physmap_flash_probe, .remove = physmap_flash_remove, +#ifdef CONFIG_PM + .suspend = physmap_flash_suspend, + .resume = physmap_flash_resume, + .shutdown = physmap_flash_shutdown, +#endif .driver = { .name = "physmap-flash", }, diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c index ec8fdae..2257d2b 100644 --- a/drivers/mtd/maps/redwood.c +++ b/drivers/mtd/maps/redwood.c @@ -126,6 +126,8 @@ static struct mtd_info *redwood_mtd; int __init init_redwood_flash(void) { + int err = 0; + printk(KERN_NOTICE "redwood: flash mapping: %x at %x\n", WINDOW_SIZE, WINDOW_ADDR); @@ -141,11 +143,18 @@ int __init init_redwood_flash(void) if (redwood_mtd) { redwood_mtd->owner = THIS_MODULE; - return add_mtd_partitions(redwood_mtd, + err = add_mtd_partitions(redwood_mtd, redwood_flash_partitions, NUM_REDWOOD_FLASH_PARTITIONS); + if (err) { + printk("init_redwood_flash: add_mtd_partitions failed\n"); + iounmap(redwood_flash_map.virt); + } + return err; + } + iounmap(redwood_flash_map.virt); return -ENXIO; } diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c index 7d0fcf8..b8c1331 100644 --- a/drivers/mtd/maps/sbc8240.c +++ b/drivers/mtd/maps/sbc8240.c @@ -156,7 +156,7 @@ int __init init_sbc8240_mtd (void) }; int devicesfound = 0; - int i; + int i,j; for (i = 0; i < NUM_FLASH_BANKS; i++) { printk (KERN_NOTICE MSG_PREFIX @@ -166,6 +166,10 @@ int __init init_sbc8240_mtd (void) (unsigned long) ioremap (pt[i].addr, pt[i].size); if (!sbc8240_map[i].map_priv_1) { printk (MSG_PREFIX "failed to ioremap\n"); + for (j = 0; j < i; j++) { + iounmap((void *) sbc8240_map[j].map_priv_1); + sbc8240_map[j].map_priv_1 = 0; + } return -EIO; } simple_map_init(&sbc8240_mtd[i]); @@ -175,6 +179,11 @@ int __init init_sbc8240_mtd (void) if (sbc8240_mtd[i]) { sbc8240_mtd[i]->module = THIS_MODULE; devicesfound++; + } else { + if (sbc8240_map[i].map_priv_1) { + iounmap((void *) sbc8240_map[i].map_priv_1); + sbc8240_map[i].map_priv_1 = 0; + } } } diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c index 7391fd5..5e2bce2 100644 --- a/drivers/mtd/maps/scx200_docflash.c +++ b/drivers/mtd/maps/scx200_docflash.c @@ -87,19 +87,23 @@ static int __init init_scx200_docflash(void) printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n"); - if ((bridge = pci_find_device(PCI_VENDOR_ID_NS, + if ((bridge = pci_get_device(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE, NULL)) == NULL) return -ENODEV; /* check that we have found the configuration block */ - if (!scx200_cb_present()) + if (!scx200_cb_present()) { + pci_dev_put(bridge); return -ENODEV; + } if (probe) { /* Try to use the present flash mapping if any */ pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base); pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl); + pci_dev_put(bridge); + pmr = inl(scx200_cb_base + SCx200_PMR); if (base == 0 @@ -127,6 +131,7 @@ static int __init init_scx200_docflash(void) return -ENOMEM; } } else { + pci_dev_put(bridge); for (u = size; u > 1; u >>= 1) ; if (u != 1) { diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c index ec80eec..ca93212 100644 --- a/drivers/mtd/maps/walnut.c +++ b/drivers/mtd/maps/walnut.c @@ -68,6 +68,7 @@ int __init init_walnut(void) if (WALNUT_FLASH_ONBD_N(fpga_brds1)) { printk("The on-board flash is disabled (U79 sw 5)!"); + iounmap(fpga_status_adr); return -EIO; } if (WALNUT_FLASH_SRAM_SEL(fpga_brds1)) @@ -81,6 +82,7 @@ int __init init_walnut(void) if (!walnut_map.virt) { printk("Failed to ioremap flash.\n"); + iounmap(fpga_status_adr); return -EIO; } @@ -93,9 +95,11 @@ int __init init_walnut(void) ARRAY_SIZE(walnut_partitions)); } else { printk("map probe failed for flash\n"); + iounmap(fpga_status_adr); return -ENXIO; } + iounmap(fpga_status_adr); return 0; } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 168d3ba..c4d26de 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -57,6 +57,16 @@ int add_mtd_device(struct mtd_info *mtd) mtd->index = i; mtd->usecount = 0; + /* Some chips always power up locked. Unlock them now */ + if ((mtd->flags & MTD_WRITEABLE) + && (mtd->flags & MTD_STUPID_LOCK) && mtd->unlock) { + if (mtd->unlock(mtd, 0, mtd->size)) + printk(KERN_WARNING + "%s: unlock failed, " + "writes may not work\n", + mtd->name); + } + DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name); /* No need to get a refcount on the module containing the notifier, since we hold the mtd_table_mutex */ diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 3122833..09e421a 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -21,18 +21,7 @@ #include <linux/version.h> #include <asm/io.h> -/* fixme: this is ugly */ -#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0) #include <asm/mach-au1x00/au1xxx.h> -#else -#include <asm/au1000.h> -#ifdef CONFIG_MIPS_PB1550 -#include <asm/pb1550.h> -#endif -#ifdef CONFIG_MIPS_DB1550 -#include <asm/db1x00.h> -#endif -#endif /* * MTD structure for NAND controller diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c index 516c0e5..12017f3 100644 --- a/drivers/mtd/nand/edb7312.c +++ b/drivers/mtd/nand/edb7312.c @@ -198,6 +198,9 @@ static void __exit ep7312_cleanup(void) /* Release resources, unregister device */ nand_release(ap7312_mtd); + /* Release io resource */ + iounmap((void *)this->IO_ADDR_R); + /* Free the MTD device structure */ kfree(ep7312_mtd); } diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index e5bd88f..039c759 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -168,7 +168,7 @@ static void ndfc_chip_init(struct ndfc_nand_mtd *mtd) chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 256; chip->ecc.bytes = 3; - chip->ecclayout = mtd->pl_chip->ecclayout; + chip->ecclayout = chip->ecc.layout = mtd->pl_chip->ecclayout; mtd->mtd.priv = chip; mtd->mtd.owner = THIS_MODULE; } diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c index 22fa65c..eb7d4d4 100644 --- a/drivers/mtd/nand/ppchameleonevb.c +++ b/drivers/mtd/nand/ppchameleonevb.c @@ -276,6 +276,7 @@ static int __init ppchameleonevb_init(void) /* Scan to find existence of the device (it could not be mounted) */ if (nand_scan(ppchameleon_mtd, 1)) { iounmap((void *)ppchameleon_fio_base); + ppchameleon_fio_base = NULL; kfree(ppchameleon_mtd); goto nand_evb_init; } @@ -314,6 +315,8 @@ static int __init ppchameleonevb_init(void) ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); if (!ppchameleonevb_mtd) { printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n"); + if (ppchameleon_fio_base) + iounmap(ppchameleon_fio_base); return -ENOMEM; } @@ -322,6 +325,8 @@ static int __init ppchameleonevb_init(void) if (!ppchameleonevb_fio_base) { printk("ioremap PPChameleonEVB NAND flash failed\n"); kfree(ppchameleonevb_mtd); + if (ppchameleon_fio_base) + iounmap(ppchameleon_fio_base); return -EIO; } @@ -378,6 +383,8 @@ static int __init ppchameleonevb_init(void) if (nand_scan(ppchameleonevb_mtd, 1)) { iounmap((void *)ppchameleonevb_fio_base); kfree(ppchameleonevb_mtd); + if (ppchameleon_fio_base) + iounmap(ppchameleon_fio_base); return -ENXIO; } #ifdef CONFIG_MTD_PARTITIONS diff --git a/drivers/mtd/ssfdc.c b/drivers/mtd/ssfdc.c new file mode 100644 index 0000000..ddbf015 --- /dev/null +++ b/drivers/mtd/ssfdc.c @@ -0,0 +1,468 @@ +/* + * Linux driver for SSFDC Flash Translation Layer (Read only) + * (c) 2005 Eptar srl + * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com> + * + * Based on NTFL and MTDBLOCK_RO drivers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/hdreg.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/blktrans.h> + +struct ssfdcr_record { + struct mtd_blktrans_dev mbd; + int usecount; + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + int cis_block; /* block n. containing CIS/IDI */ + int erase_size; /* phys_block_size */ + unsigned short *logic_block_map; /* all zones (max 8192 phys blocks on + the 128MB) */ + int map_len; /* n. phys_blocks on the card */ +}; + +#define SSFDCR_MAJOR 257 +#define SSFDCR_PARTN_BITS 3 + +#define SECTOR_SIZE 512 +#define SECTOR_SHIFT 9 +#define OOB_SIZE 16 + +#define MAX_LOGIC_BLK_PER_ZONE 1000 +#define MAX_PHYS_BLK_PER_ZONE 1024 + +#define KB(x) ( (x) * 1024L ) +#define MB(x) ( KB(x) * 1024L ) + +/** CHS Table + 1MB 2MB 4MB 8MB 16MB 32MB 64MB 128MB +NCylinder 125 125 250 250 500 500 500 500 +NHead 4 4 4 4 4 8 8 16 +NSector 4 8 8 16 16 16 32 32 +SumSector 2,000 4,000 8,000 16,000 32,000 64,000 128,000 256,000 +SectorSize 512 512 512 512 512 512 512 512 +**/ + +typedef struct { + unsigned long size; + unsigned short cyl; + unsigned char head; + unsigned char sec; +} chs_entry_t; + +/* Must be ordered by size */ +static const chs_entry_t chs_table[] = { + { MB( 1), 125, 4, 4 }, + { MB( 2), 125, 4, 8 }, + { MB( 4), 250, 4, 8 }, + { MB( 8), 250, 4, 16 }, + { MB( 16), 500, 4, 16 }, + { MB( 32), 500, 8, 16 }, + { MB( 64), 500, 8, 32 }, + { MB(128), 500, 16, 32 }, + { 0 }, +}; + +static int get_chs(unsigned long size, unsigned short *cyl, unsigned char *head, + unsigned char *sec) +{ + int k; + int found = 0; + + k = 0; + while (chs_table[k].size > 0 && size > chs_table[k].size) + k++; + + if (chs_table[k].size > 0) { + if (cyl) + *cyl = chs_table[k].cyl; + if (head) + *head = chs_table[k].head; + if (sec) + *sec = chs_table[k].sec; + found = 1; + } + + return found; +} + +/* These bytes are the signature for the CIS/IDI sector */ +static const uint8_t cis_numbers[] = { + 0x01, 0x03, 0xD9, 0x01, 0xFF, 0x18, 0x02, 0xDF, 0x01, 0x20 +}; + +/* Read and check for a valid CIS sector */ +static int get_valid_cis_sector(struct mtd_info *mtd) +{ + int ret, k, cis_sector; + size_t retlen; + loff_t offset; + uint8_t sect_buf[SECTOR_SIZE]; + + /* + * Look for CIS/IDI sector on the first GOOD block (give up after 4 bad + * blocks). If the first good block doesn't contain CIS number the flash + * is not SSFDC formatted + */ + cis_sector = -1; + for (k = 0, offset = 0; k < 4; k++, offset += mtd->erasesize) { + if (!mtd->block_isbad(mtd, offset)) { + ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen, + sect_buf); + + /* CIS pattern match on the sector buffer */ + if ( ret < 0 || retlen != SECTOR_SIZE ) { + printk(KERN_WARNING + "SSFDC_RO:can't read CIS/IDI sector\n"); + } else if ( !memcmp(sect_buf, cis_numbers, + sizeof(cis_numbers)) ) { + /* Found */ + cis_sector = (int)(offset >> SECTOR_SHIFT); + } else { + DEBUG(MTD_DEBUG_LEVEL1, + "SSFDC_RO: CIS/IDI sector not found" + " on %s (mtd%d)\n", mtd->name, + mtd->index); + } + break; + } + } + + return cis_sector; +} + +/* Read physical sector (wrapper to MTD_READ) */ +static int read_physical_sector(struct mtd_info *mtd, uint8_t *sect_buf, + int sect_no) +{ + int ret; + size_t retlen; + loff_t offset = (loff_t)sect_no << SECTOR_SHIFT; + + ret = mtd->read(mtd, offset, SECTOR_SIZE, &retlen, sect_buf); + if (ret < 0 || retlen != SECTOR_SIZE) + return -1; + + return 0; +} + +/* Read redundancy area (wrapper to MTD_READ_OOB */ +static int read_raw_oob(struct mtd_info *mtd, loff_t offs, uint8_t *buf) +{ + struct mtd_oob_ops ops; + int ret; + + ops.mode = MTD_OOB_RAW; + ops.ooboffs = 0; + ops.ooblen = mtd->oobsize; + ops.len = OOB_SIZE; + ops.oobbuf = buf; + ops.datbuf = NULL; + + ret = mtd->read_oob(mtd, offs, &ops); + if (ret < 0 || ops.retlen != OOB_SIZE) + return -1; + + return 0; +} + +/* Parity calculator on a word of n bit size */ +static int get_parity(int number, int size) +{ + int k; + int parity; + + parity = 1; + for (k = 0; k < size; k++) { + parity += (number >> k); + parity &= 1; + } + return parity; +} + +/* Read and validate the logical block address field stored in the OOB */ +static int get_logical_address(uint8_t *oob_buf) +{ + int block_address, parity; + int offset[2] = {6, 11}; /* offset of the 2 address fields within OOB */ + int j; + int ok = 0; + + /* + * Look for the first valid logical address + * Valid address has fixed pattern on most significant bits and + * parity check + */ + for (j = 0; j < ARRAY_SIZE(offset); j++) { + block_address = ((int)oob_buf[offset[j]] << 8) | + oob_buf[offset[j]+1]; + + /* Check for the signature bits in the address field (MSBits) */ + if ((block_address & ~0x7FF) == 0x1000) { + parity = block_address & 0x01; + block_address &= 0x7FF; + block_address >>= 1; + + if (get_parity(block_address, 10) != parity) { + DEBUG(MTD_DEBUG_LEVEL0, + "SSFDC_RO: logical address field%d" + "parity error(0x%04X)\n", j+1, + block_address); + } else { + ok = 1; + break; + } + } + } + + if ( !ok ) + block_address = -2; + + DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n", + block_address); + + return block_address; +} + +/* Build the logic block map */ +static int build_logical_block_map(struct ssfdcr_record *ssfdc) +{ + unsigned long offset; + uint8_t oob_buf[OOB_SIZE]; + int ret, block_address, phys_block; + struct mtd_info *mtd = ssfdc->mbd.mtd; + + DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() nblks=%d (%luK)\n", + ssfdc->map_len, (unsigned long)ssfdc->map_len * + ssfdc->erase_size / 1024 ); + + /* Scan every physical block, skip CIS block */ + for (phys_block = ssfdc->cis_block + 1; phys_block < ssfdc->map_len; + phys_block++) { + offset = (unsigned long)phys_block * ssfdc->erase_size; + if (mtd->block_isbad(mtd, offset)) + continue; /* skip bad blocks */ + + ret = read_raw_oob(mtd, offset, oob_buf); + if (ret < 0) { + DEBUG(MTD_DEBUG_LEVEL0, + "SSFDC_RO: mtd read_oob() failed at %lu\n", + offset); + return -1; + } + block_address = get_logical_address(oob_buf); + + /* Skip invalid addresses */ + if (block_address >= 0 && + block_address < MAX_LOGIC_BLK_PER_ZONE) { + int zone_index; + + zone_index = phys_block / MAX_PHYS_BLK_PER_ZONE; + block_address += zone_index * MAX_LOGIC_BLK_PER_ZONE; + ssfdc->logic_block_map[block_address] = + (unsigned short)phys_block; + + DEBUG(MTD_DEBUG_LEVEL2, + "SSFDC_RO: build_block_map() phys_block=%d," + "logic_block_addr=%d, zone=%d\n", + phys_block, block_address, zone_index); + } + } + return 0; +} + +static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) +{ + struct ssfdcr_record *ssfdc; + int cis_sector; + + /* Check for small page NAND flash */ + if (mtd->type != MTD_NANDFLASH || mtd->oobsize != OOB_SIZE) + return; + + /* Check for SSDFC format by reading CIS/IDI sector */ + cis_sector = get_valid_cis_sector(mtd); + if (cis_sector == -1) + return; + + ssfdc = kzalloc(sizeof(struct ssfdcr_record), GFP_KERNEL); + if (!ssfdc) { + printk(KERN_WARNING + "SSFDC_RO: out of memory for data structures\n"); + return; + } + + ssfdc->mbd.mtd = mtd; + ssfdc->mbd.devnum = -1; + ssfdc->mbd.blksize = SECTOR_SIZE; + ssfdc->mbd.tr = tr; + ssfdc->mbd.readonly = 1; + + ssfdc->cis_block = cis_sector / (mtd->erasesize >> SECTOR_SHIFT); + ssfdc->erase_size = mtd->erasesize; + ssfdc->map_len = mtd->size / mtd->erasesize; + + DEBUG(MTD_DEBUG_LEVEL1, + "SSFDC_RO: cis_block=%d,erase_size=%d,map_len=%d,n_zones=%d\n", + ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len, + (ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) / + MAX_PHYS_BLK_PER_ZONE); + + /* Set geometry */ + ssfdc->heads = 16; + ssfdc->sectors = 32; + get_chs( mtd->size, NULL, &ssfdc->heads, &ssfdc->sectors); + ssfdc->cylinders = (unsigned short)((mtd->size >> SECTOR_SHIFT) / + ((long)ssfdc->sectors * (long)ssfdc->heads)); + + DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n", + ssfdc->cylinders, ssfdc->heads , ssfdc->sectors, + (long)ssfdc->cylinders * (long)ssfdc->heads * + (long)ssfdc->sectors ); + + ssfdc->mbd.size = (long)ssfdc->heads * (long)ssfdc->cylinders * + (long)ssfdc->sectors; + + /* Allocate logical block map */ + ssfdc->logic_block_map = kmalloc( sizeof(ssfdc->logic_block_map[0]) * + ssfdc->map_len, GFP_KERNEL); + if (!ssfdc->logic_block_map) { + printk(KERN_WARNING + "SSFDC_RO: out of memory for data structures\n"); + goto out_err; + } + memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) * + ssfdc->map_len); + + /* Build logical block map */ + if (build_logical_block_map(ssfdc) < 0) + goto out_err; + + /* Register device + partitions */ + if (add_mtd_blktrans_dev(&ssfdc->mbd)) + goto out_err; + + printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n", + ssfdc->mbd.devnum + 'a', mtd->index, mtd->name); + return; + +out_err: + kfree(ssfdc->logic_block_map); + kfree(ssfdc); +} + +static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev) +{ + struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev; + + DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum); + + del_mtd_blktrans_dev(dev); + kfree(ssfdc->logic_block_map); + kfree(ssfdc); +} + +static int ssfdcr_readsect(struct mtd_blktrans_dev *dev, + unsigned long logic_sect_no, char *buf) +{ + struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev; + int sectors_per_block, offset, block_address; + + sectors_per_block = ssfdc->erase_size >> SECTOR_SHIFT; + offset = (int)(logic_sect_no % sectors_per_block); + block_address = (int)(logic_sect_no / sectors_per_block); + + DEBUG(MTD_DEBUG_LEVEL3, + "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d," + " block_addr=%d\n", logic_sect_no, sectors_per_block, offset, + block_address); + + if (block_address >= ssfdc->map_len) + BUG(); + + block_address = ssfdc->logic_block_map[block_address]; + + DEBUG(MTD_DEBUG_LEVEL3, + "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n", + block_address); + + if (block_address < 0xffff) { + unsigned long sect_no; + + sect_no = (unsigned long)block_address * sectors_per_block + + offset; + + DEBUG(MTD_DEBUG_LEVEL3, + "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n", + sect_no); + + if (read_physical_sector( ssfdc->mbd.mtd, buf, sect_no ) < 0) + return -EIO; + } else { + memset(buf, 0xff, SECTOR_SIZE); + } + + return 0; +} + +static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) +{ + struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev; + + DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n", + ssfdc->cylinders, ssfdc->heads, ssfdc->sectors); + + geo->heads = ssfdc->heads; + geo->sectors = ssfdc->sectors; + geo->cylinders = ssfdc->cylinders; + + return 0; +} + +/**************************************************************************** + * + * Module stuff + * + ****************************************************************************/ + +static struct mtd_blktrans_ops ssfdcr_tr = { + .name = "ssfdc", + .major = SSFDCR_MAJOR, + .part_bits = SSFDCR_PARTN_BITS, + .getgeo = ssfdcr_getgeo, + .readsect = ssfdcr_readsect, + .add_mtd = ssfdcr_add_mtd, + .remove_dev = ssfdcr_remove_dev, + .owner = THIS_MODULE, +}; + +static int __init init_ssfdcr(void) +{ + printk(KERN_INFO "SSFDC read-only Flash Translation layer\n"); + + return register_mtd_blktrans(&ssfdcr_tr); +} + +static void __exit cleanup_ssfdcr(void) +{ + deregister_mtd_blktrans(&ssfdcr_tr); +} + +module_init(init_ssfdcr); +module_exit(cleanup_ssfdcr); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>"); +MODULE_DESCRIPTION("Flash Translation Layer for read-only SSFDC SmartMedia card"); |
