diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/devices/st_spi_fsm.c | 82 |
1 files changed, 81 insertions, 1 deletions
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 0eb2c09..89d5e0b 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -326,6 +326,7 @@ struct flash_info { }; static int stfsm_n25q_config(struct stfsm *fsm); +static int stfsm_mx25_config(struct stfsm *fsm); static struct flash_info flash_types[] = { /* @@ -357,7 +358,8 @@ static struct flash_info flash_types[] = { FLASH_FLAG_SE_4K | \ FLASH_FLAG_SE_32K) { "mx25l25635e", 0xc22019, 0, 64*1024, 512, - (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, NULL } + (MX25_FLAG | FLASH_FLAG_32BIT_ADDR | FLASH_FLAG_RESET), 70, + stfsm_mx25_config }, #define N25Q_FLAG (FLASH_FLAG_READ_WRITE | \ FLASH_FLAG_READ_FAST | \ @@ -509,6 +511,31 @@ static struct seq_rw_config n25q_read4_configs[] = { {0x00, 0, 0, 0, 0, 0x00, 0, 0}, }; +/* + * [MX25xxx] Configuration + */ +#define MX25_STATUS_QE (0x1 << 6) + +static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) +{ + seq->seq_opc[0] = (SEQ_OPC_PADS_1 | + SEQ_OPC_CYCLES(8) | + SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) | + SEQ_OPC_CSDEASSERT); + + seq->seq[0] = STFSM_INST_CMD1; + seq->seq[1] = STFSM_INST_WAIT; + seq->seq[2] = STFSM_INST_STOP; + + seq->seq_cfg = (SEQ_CFG_PADS_1 | + SEQ_CFG_ERASE | + SEQ_CFG_READNOTWRITE | + SEQ_CFG_CSDEASSERT | + SEQ_CFG_STARTSEQ); + + return 0; +} + static struct stfsm_seq stfsm_seq_read; /* Dynamically populated */ static struct stfsm_seq stfsm_seq_write; /* Dynamically populated */ static struct stfsm_seq stfsm_seq_en_32bit_addr;/* Dynamically populated */ @@ -1048,6 +1075,59 @@ static int stfsm_prepare_rwe_seqs_default(struct stfsm *fsm) return 0; } +static int stfsm_mx25_config(struct stfsm *fsm) +{ + uint32_t flags = fsm->info->flags; + uint32_t data_pads; + uint8_t sta; + int ret; + bool soc_reset; + + /* + * Use default READ/WRITE sequences + */ + ret = stfsm_prepare_rwe_seqs_default(fsm); + if (ret) + return ret; + + /* + * Configure 32-bit Address Support + */ + if (flags & FLASH_FLAG_32BIT_ADDR) { + /* Configure 'enter_32bitaddr' FSM sequence */ + stfsm_mx25_en_32bit_addr_seq(&stfsm_seq_en_32bit_addr); + + soc_reset = stfsm_can_handle_soc_reset(fsm); + if (soc_reset || !fsm->booted_from_spi) { + /* If we can handle SoC resets, we enable 32-bit address + * mode pervasively */ + stfsm_enter_32bit_addr(fsm, 1); + + } else { + /* Else, enable/disable 32-bit addressing before/after + * each operation */ + fsm->configuration = (CFG_READ_TOGGLE_32BIT_ADDR | + CFG_WRITE_TOGGLE_32BIT_ADDR | + CFG_ERASESEC_TOGGLE_32BIT_ADDR); + /* It seems a small delay is required after exiting + * 32-bit mode following a write operation. The issue + * is under investigation. + */ + fsm->configuration |= CFG_WRITE_EX_32BIT_ADDR_DELAY; + } + } + + /* For QUAD mode, set 'QE' STATUS bit */ + data_pads = ((stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; + if (data_pads == 4) { + stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta); + sta |= MX25_STATUS_QE; + stfsm_write_status(fsm, sta, 1); + } + + return 0; +} + static int stfsm_n25q_config(struct stfsm *fsm) { uint32_t flags = fsm->info->flags; |
