diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 73 | ||||
| -rw-r--r-- | drivers/mtd/maps/Makefile | 7 | ||||
| -rw-r--r-- | drivers/mtd/maps/alchemy-flash.c | 192 | ||||
| -rw-r--r-- | drivers/mtd/maps/db1550-flash.c | 187 | ||||
| -rw-r--r-- | drivers/mtd/maps/db1x00-flash.c | 226 | ||||
| -rw-r--r-- | drivers/mtd/maps/pb1550-flash.c | 203 | ||||
| -rw-r--r-- | drivers/mtd/maps/pb1xxx-flash.c | 178 |
7 files changed, 199 insertions, 867 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index d29dc12..f036de8 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,5 +1,5 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.44 2005/02/18 11:03:45 bjd Exp $ +# $Id: Kconfig,v 1.45 2005/02/27 21:50:21 ppopov Exp $ menu "Mapping drivers for chip access" depends on MTD!=n @@ -213,74 +213,11 @@ config MTD_NETtel help Support for flash chips on NETtel/SecureEdge/SnapGear boards. -config MTD_PB1XXX - tristate "Flash devices on Alchemy PB1xxx boards" - depends on MIPS && ( MIPS_PB1000 || MIPS_PB1100 || MIPS_PB1500 ) +config MTD_ALCHEMY + tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' + depends on MIPS && SOC_AU1X00 help - Flash memory access on Alchemy Pb1000/Pb1100/Pb1500 boards - -config MTD_PB1XXX_BOOT - bool "PB1x00 boot flash device" - depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) - help - Use the first of the two 32MiB flash banks on Pb1100/Pb1500 board. - You can say 'Y' to both this and 'MTD_PB1XXX_USER' below, to use - both banks. - -config MTD_PB1XXX_USER - bool "PB1x00 user flash device" - depends on MTD_PB1XXX && ( MIPS_PB1100 || MIPS_PB1500 ) - default y if MTD_PB1XX_BOOT = n - help - Use the second of the two 32MiB flash banks on Pb1100/Pb1500 board. - You can say 'Y' to both this and 'MTD_PB1XXX_BOOT' above, to use - both banks. - -config MTD_PB1550 - tristate "Flash devices on Alchemy PB1550 board" - depends on MIPS && MIPS_PB1550 - help - Flash memory access on Alchemy Pb1550 board - -config MTD_PB1550_BOOT - bool "PB1550 boot flash device" - depends on MTD_PB1550 - help - Use the first of the two 64MiB flash banks on Pb1550 board. - You can say 'Y' to both this and 'MTD_PB1550_USER' below, to use - both banks. - -config MTD_PB1550_USER - bool "PB1550 user flash device" - depends on MTD_PB1550 - default y if MTD_PB1550_BOOT = n - help - Use the second of the two 64MiB flash banks on Pb1550 board. - You can say 'Y' to both this and 'MTD_PB1550_BOOT' above, to use - both banks. - -config MTD_DB1550 - tristate "Flash devices on Alchemy DB1550 board" - depends on MIPS && MIPS_DB1550 - help - Flash memory access on Alchemy Db1550 board - -config MTD_DB1550_BOOT - bool "DB1550 boot flash device" - depends on MTD_DB1550 - help - Use the first of the two 64MiB flash banks on Db1550 board. - You can say 'Y' to both this and 'MTD_DB1550_USER' below, to use - both banks. - -config MTD_DB1550_USER - bool "DB1550 user flash device" - depends on MTD_DB1550 - default y if MTD_DB1550_BOOT = n - help - Use the second of the two 64MiB flash banks on Db1550 board. - You can say 'Y' to both this and 'MTD_DB1550_BOOT' above, to use - both banks. + Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index d2e6dcc..d0639a8 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -1,7 +1,7 @@ # # linux/drivers/maps/Makefile # -# $Id: Makefile.common,v 1.24 2005/01/24 00:35:21 bjd Exp $ +# $Id: Makefile.common,v 1.25 2005/02/27 21:50:21 ppopov Exp $ ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y) obj-$(CONFIG_MTD) += map_funcs.o @@ -44,10 +44,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o obj-$(CONFIG_MTD_OCELOT) += ocelot.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o -obj-$(CONFIG_MTD_PB1XXX) += pb1xxx-flash.o -obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o -obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o -obj-$(CONFIG_MTD_DB1550) += db1550-flash.o +obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o obj-$(CONFIG_MTD_LASAT) += lasat.o obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c new file mode 100644 index 0000000..27fd2a3 --- /dev/null +++ b/drivers/mtd/maps/alchemy-flash.c @@ -0,0 +1,192 @@ +/* + * Flash memory access on AMD Alchemy evaluation boards + * + * $Id: alchemy-flash.c,v 1.1 2005/02/27 21:50:21 ppopov Exp $ + * + * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com> + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> + +#include <asm/io.h> + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#ifdef CONFIG_MIPS_PB1000 +#define BOARD_MAP_NAME "Pb1000 Flash" +#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_PB1500 +#define BOARD_MAP_NAME "Pb1500 Flash" +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_PB1100 +#define BOARD_MAP_NAME "Pb1100 Flash" +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_PB1550 +#define BOARD_MAP_NAME "Pb1550 Flash" +#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_PB1200 +#define BOARD_MAP_NAME "Pb1200 Flash" +#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ +#define BOARD_FLASH_WIDTH 2 /* 16-bits */ +#endif + +#ifdef CONFIG_MIPS_DB1000 +#define BOARD_MAP_NAME "Db1000 Flash" +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_DB1500 +#define BOARD_MAP_NAME "Db1500 Flash" +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_DB1100 +#define BOARD_MAP_NAME "Db1100 Flash" +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_DB1550 +#define BOARD_MAP_NAME "Db1550 Flash" +#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif + +#ifdef CONFIG_MIPS_DB1200 +#define BOARD_MAP_NAME "Db1200 Flash" +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 2 /* 16-bits */ +#endif + +#ifdef CONFIG_MIPS_HYDROGEN3 +#define BOARD_MAP_NAME "Hydrogen3 Flash" +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#define USE_LOCAL_ACCESSORS /* why? */ +#endif + +#ifdef CONFIG_MIPS_BOSPORUS +#define BOARD_MAP_NAME "Bosporus Flash" +#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ +#define BOARD_FLASH_WIDTH 2 /* 16-bits */ +#endif + +#ifdef CONFIG_MIPS_MIRAGE +#define BOARD_MAP_NAME "Mirage Flash" +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#define USE_LOCAL_ACCESSORS /* why? */ +#endif + +static struct map_info alchemy_map = { + .name = BOARD_MAP_NAME, +}; + +static struct mtd_partition alchemy_partitions[] = { + { + .name = "User FS", + .size = BOARD_FLASH_SIZE - 0x00400000, + .offset = 0x0000000 + },{ + .name = "YAMON", + .size = 0x0100000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE + },{ + .name = "raw kernel", + .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ + .offset = MTDPART_OFS_APPEND, + } +}; + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_info *mymtd; + +int __init alchemy_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + unsigned long window_addr; + unsigned long window_size; + + /* Default flash buswidth */ + alchemy_map.bankwidth = BOARD_FLASH_WIDTH; + + window_addr = 0x20000000 - BOARD_FLASH_SIZE; + window_size = BOARD_FLASH_SIZE; +#ifdef CONFIG_MIPS_MIRAGE_WHY + /* Boot ROM flash bank only; no user bank */ + window_addr = 0x1C000000; + window_size = 0x04000000; + /* USERFS from 0x1C00 0000 to 0x1FC00000 */ + alchemy_partitions[0].size = 0x03C00000; +#endif + + /* + * Static partition definition selection + */ + parts = alchemy_partitions; + nb_parts = NB_OF(alchemy_partitions); + alchemy_map.size = window_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", + alchemy_map.bankwidth*8); + alchemy_map.virt = ioremap(window_addr, window_size); + mymtd = do_map_probe("cfi_probe", &alchemy_map); + if (!mymtd) { + iounmap(alchemy_map.virt); + return -ENXIO; + } + mymtd->owner = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit alchemy_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + iounmap(alchemy_map.virt); + } +} + +module_init(alchemy_mtd_init); +module_exit(alchemy_mtd_cleanup); + +MODULE_AUTHOR("Embedded Alley Solutions, Inc"); +MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/db1550-flash.c b/drivers/mtd/maps/db1550-flash.c deleted file mode 100644 index d213888..0000000 --- a/drivers/mtd/maps/db1550-flash.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Flash memory access on Alchemy Db1550 board - * - * $Id: db1550-flash.c,v 1.7 2004/11/04 13:24:14 gleixner Exp $ - * - * (C) 2004 Embedded Edge, LLC, based on db1550-flash.c: - * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com> - * - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#ifdef DEBUG_RW -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -static unsigned long window_addr; -static unsigned long window_size; - - -static struct map_info db1550_map = { - .name = "Db1550 flash", -}; - -static unsigned char flash_bankwidth = 4; - -/* - * Support only 64MB NOR Flash parts - */ - -#if defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER) -#define DB1550_BOTH_BANKS -#elif defined(CONFIG_MTD_DB1550_BOOT) && !defined(CONFIG_MTD_DB1550_USER) -#define DB1550_BOOT_ONLY -#elif !defined(CONFIG_MTD_DB1550_BOOT) && defined(CONFIG_MTD_DB1550_USER) -#define DB1550_USER_ONLY -#endif - -#ifdef DB1550_BOTH_BANKS -/* both banks will be used. Combine the first bank and the first - * part of the second bank together into a single jffs/jffs2 - * partition. - */ -static struct mtd_partition db1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash - * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash - */ - { - .name = "User FS", - .size = (0x1FC00000 - 0x18000000), - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1550_BOOT_ONLY) -static struct mtd_partition db1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash - */ - { - .name = "User FS", - .size = 0x03c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is yamon env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1550_USER_ONLY) -static struct mtd_partition db1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash - */ - { - .name = "User FS", - .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ - .offset = 0x0000000 - },{ - .name = "raw kernel", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; -#else -#error MTD_DB1550 define combo error /* should never happen */ -#endif - -#define NB_OF(x) (sizeof(x)/sizeof(x[0])) - -static struct mtd_info *mymtd; - -/* - * Probe the flash density and setup window address and size - * based on user CONFIG options. There are times when we don't - * want the MTD driver to be probing the boot or user flash, - * so having the option to enable only one bank is important. - */ -int setup_flash_params(void) -{ -#if defined(DB1550_BOTH_BANKS) - window_addr = 0x18000000; - window_size = 0x8000000; -#elif defined(DB1550_BOOT_ONLY) - window_addr = 0x1C000000; - window_size = 0x4000000; -#else /* USER ONLY */ - window_addr = 0x18000000; - window_size = 0x4000000; -#endif - return 0; -} - -int __init db1550_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - - /* Default flash bankwidth */ - db1550_map.bankwidth = flash_bankwidth; - - if (setup_flash_params()) - return -ENXIO; - - /* - * Static partition definition selection - */ - parts = db1550_partitions; - nb_parts = NB_OF(db1550_partitions); - db1550_map.size = window_size; - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "Db1550 flash: probing %d-bit flash bus\n", - db1550_map.bankwidth*8); - db1550_map.virt = ioremap(window_addr, window_size); - mymtd = do_map_probe("cfi_probe", &db1550_map); - if (!mymtd) return -ENXIO; - mymtd->owner = THIS_MODULE; - - add_mtd_partitions(mymtd, parts, nb_parts); - return 0; -} - -static void __exit db1550_mtd_cleanup(void) -{ - if (mymtd) { - del_mtd_partitions(mymtd); - map_destroy(mymtd); - iounmap((void *) db1550_map.virt); - } -} - -module_init(db1550_mtd_init); -module_exit(db1550_mtd_cleanup); - -MODULE_AUTHOR("Embedded Edge, LLC"); -MODULE_DESCRIPTION("Db1550 mtd map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/db1x00-flash.c b/drivers/mtd/maps/db1x00-flash.c deleted file mode 100644 index faa68ec..0000000 --- a/drivers/mtd/maps/db1x00-flash.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * Flash memory access on Alchemy Db1xxx boards - * - * $Id: db1x00-flash.c,v 1.6 2004/11/04 13:24:14 gleixner Exp $ - * - * (C) 2003 Pete Popov <ppopov@embeddedalley.com> - * - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#ifdef DEBUG_RW -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* MTD CONFIG OPTIONS */ -#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_BOTH_BANKS -#elif defined(CONFIG_MTD_DB1X00_BOOT) && !defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_BOOT_ONLY -#elif !defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER) -#define DB1X00_USER_ONLY -#endif - -static unsigned long window_addr; -static unsigned long window_size; -static unsigned long flash_size; - -static unsigned short *bcsr = (unsigned short *)0xAE000000; -static unsigned char flash_bankwidth = 4; - -/* - * The Db1x boards support different flash densities. We setup - * the mtd_partition structures below for default of 64Mbit - * flash densities, and override the partitions sizes, if - * necessary, after we check the board status register. - */ - -#ifdef DB1X00_BOTH_BANKS -/* both banks will be used. Combine the first bank and the first - * part of the second bank together into a single jffs/jffs2 - * partition. - */ -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x1c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1X00_BOOT_ONLY) -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x00c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(DB1X00_USER_ONLY) -static struct mtd_partition db1x00_partitions[] = { - { - .name = "User FS", - .size = 0x0e00000, - .offset = 0x0000000 - },{ - .name = "raw kernel", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; -#else -#error MTD_DB1X00 define combo error /* should never happen */ -#endif -#define NB_OF(x) (sizeof(x)/sizeof(x[0])) - -#define NAME "Db1x00 Linux Flash" - -static struct map_info db1xxx_mtd_map = { - .name = NAME, -}; - -static struct mtd_partition *parsed_parts; -static struct mtd_info *db1xxx_mtd; - -/* - * Probe the flash density and setup window address and size - * based on user CONFIG options. There are times when we don't - * want the MTD driver to be probing the boot or user flash, - * so having the option to enable only one bank is important. - */ -int setup_flash_params(void) -{ - switch ((bcsr[2] >> 14) & 0x3) { - case 0: /* 64Mbit devices */ - flash_size = 0x800000; /* 8MB per part */ -#if defined(DB1X00_BOTH_BANKS) - window_addr = 0x1E000000; - window_size = 0x2000000; -#elif defined(DB1X00_BOOT_ONLY) - window_addr = 0x1F000000; - window_size = 0x1000000; -#else /* USER ONLY */ - window_addr = 0x1E000000; - window_size = 0x1000000; -#endif - break; - case 1: - /* 128 Mbit devices */ - flash_size = 0x1000000; /* 16MB per part */ -#if defined(DB1X00_BOTH_BANKS) - window_addr = 0x1C000000; - window_size = 0x4000000; - /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */ - db1x00_partitions[0].size = 0x3C00000; -#elif defined(DB1X00_BOOT_ONLY) - window_addr = 0x1E000000; - window_size = 0x2000000; - /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */ - db1x00_partitions[0].size = 0x1C00000; -#else /* USER ONLY */ - window_addr = 0x1C000000; - window_size = 0x2000000; - /* USERFS from 0x1C00 0000 to 0x1DE00000 */ - db1x00_partitions[0].size = 0x1DE0000; -#endif - break; - case 2: - /* 256 Mbit devices */ - flash_size = 0x4000000; /* 64MB per part */ -#if defined(DB1X00_BOTH_BANKS) - return 1; -#elif defined(DB1X00_BOOT_ONLY) - /* Boot ROM flash bank only; no user bank */ - window_addr = 0x1C000000; - window_size = 0x4000000; - /* USERFS from 0x1C00 0000 to 0x1FC00000 */ - db1x00_partitions[0].size = 0x3C00000; -#else /* USER ONLY */ - return 1; -#endif - break; - default: - return 1; - } - db1xxx_mtd_map.size = window_size; - db1xxx_mtd_map.bankwidth = flash_bankwidth; - db1xxx_mtd_map.phys = window_addr; - db1xxx_mtd_map.bankwidth = flash_bankwidth; - return 0; -} - -int __init db1x00_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - - if (setup_flash_params()) - return -ENXIO; - - /* - * Static partition definition selection - */ - parts = db1x00_partitions; - nb_parts = NB_OF(db1x00_partitions); - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", - db1xxx_mtd_map.bankwidth*8); - db1xxx_mtd_map.virt = ioremap(window_addr, window_size); - db1xxx_mtd = do_map_probe("cfi_probe", &db1xxx_mtd_map); - if (!db1xxx_mtd) return -ENXIO; - db1xxx_mtd->owner = THIS_MODULE; - - add_mtd_partitions(db1xxx_mtd, parts, nb_parts); - return 0; -} - -static void __exit db1x00_mtd_cleanup(void) -{ - if (db1xxx_mtd) { - del_mtd_partitions(db1xxx_mtd); - map_destroy(db1xxx_mtd); - if (parsed_parts) - kfree(parsed_parts); - } -} - -module_init(db1x00_mtd_init); -module_exit(db1x00_mtd_cleanup); - -MODULE_AUTHOR("Pete Popov"); -MODULE_DESCRIPTION("Db1x00 mtd map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/pb1550-flash.c b/drivers/mtd/maps/pb1550-flash.c deleted file mode 100644 index 1424726a..0000000 --- a/drivers/mtd/maps/pb1550-flash.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Flash memory access on Alchemy Pb1550 board - * - * $Id: pb1550-flash.c,v 1.6 2004/11/04 13:24:15 gleixner Exp $ - * - * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c: - * (C) 2003 Pete Popov <ppopov@pacbell.net> - * - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> -#include <asm/au1000.h> -#include <asm/pb1550.h> - -#ifdef DEBUG_RW -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -static unsigned long window_addr; -static unsigned long window_size; - - -static struct map_info pb1550_map = { - .name = "Pb1550 flash", -}; - -static unsigned char flash_bankwidth = 4; - -/* - * Support only 64MB NOR Flash parts - */ - -#ifdef PB1550_BOTH_BANKS -/* both banks will be used. Combine the first bank and the first - * part of the second bank together into a single jffs/jffs2 - * partition. - */ -static struct mtd_partition pb1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash - * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash - */ - { - .name = "User FS", - .size = (0x1FC00000 - 0x18000000), - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(PB1550_BOOT_ONLY) -static struct mtd_partition pb1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash - */ - { - .name = "User FS", - .size = 0x03c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000-0x40000), /* last 256KB is yamon env */ - .offset = MTDPART_OFS_APPEND, - } -}; -#elif defined(PB1550_USER_ONLY) -static struct mtd_partition pb1550_partitions[] = { - /* assume boot[2:0]:swap is '0000' or '1000', which translates to: - * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash - */ - { - .name = "User FS", - .size = (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ - .offset = 0x0000000 - },{ - .name = "raw kernel", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; -#else -#error MTD_PB1550 define combo error /* should never happen */ -#endif - -#define NB_OF(x) (sizeof(x)/sizeof(x[0])) - -static struct mtd_info *mymtd; - -/* - * Probe the flash density and setup window address and size - * based on user CONFIG options. There are times when we don't - * want the MTD driver to be probing the boot or user flash, - * so having the option to enable only one bank is important. - */ -int setup_flash_params(void) -{ - u16 boot_swapboot; - boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | - ((bcsr->status >> 6) & 0x1); - printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot); - - switch (boot_swapboot) { - case 0: /* 512Mbit devices, both enabled */ - case 1: - case 8: - case 9: -#if defined(PB1550_BOTH_BANKS) - window_addr = 0x18000000; - window_size = 0x8000000; -#elif defined(PB1550_BOOT_ONLY) - window_addr = 0x1C000000; - window_size = 0x4000000; -#else /* USER ONLY */ - window_addr = 0x1E000000; - window_size = 0x4000000; -#endif - break; - case 0xC: - case 0xD: - case 0xE: - case 0xF: - /* 64 MB Boot NOR Flash is disabled */ - /* and the start address is moved to 0x0C00000 */ - window_addr = 0x0C000000; - window_size = 0x4000000; - default: - printk("Pb1550 MTD: unsupported boot:swap setting\n"); - return 1; - } - return 0; -} - -int __init pb1550_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - - /* Default flash bankwidth */ - pb1550_map.bankwidth = flash_bankwidth; - - if (setup_flash_params()) - return -ENXIO; - - /* - * Static partition definition selection - */ - parts = pb1550_partitions; - nb_parts = NB_OF(pb1550_partitions); - pb1550_map.size = window_size; - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", - pb1550_map.bankwidth*8); - pb1550_map.virt = ioremap(window_addr, window_size); - mymtd = do_map_probe("cfi_probe", &pb1550_map); - if (!mymtd) return -ENXIO; - mymtd->owner = THIS_MODULE; - - add_mtd_partitions(mymtd, parts, nb_parts); - return 0; -} - -static void __exit pb1550_mtd_cleanup(void) -{ - if (mymtd) { - del_mtd_partitions(mymtd); - map_destroy(mymtd); - } -} - -module_init(pb1550_mtd_init); -module_exit(pb1550_mtd_cleanup); - -MODULE_AUTHOR("Embedded Edge, LLC"); -MODULE_DESCRIPTION("Pb1550 mtd map driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/pb1xxx-flash.c b/drivers/mtd/maps/pb1xxx-flash.c deleted file mode 100644 index 06e7315..0000000 --- a/drivers/mtd/maps/pb1xxx-flash.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Flash memory access on Alchemy Pb1xxx boards - * - * (C) 2001 Pete Popov <ppopov@mvista.com> - * - * $Id: pb1xxx-flash.c,v 1.14 2004/11/04 13:24:15 gleixner Exp $ - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#ifdef DEBUG_RW -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -#ifdef CONFIG_MIPS_PB1000 - -#define WINDOW_ADDR 0x1F800000 -#define WINDOW_SIZE 0x800000 - -static struct mtd_partition pb1xxx_partitions[] = { - { - .name = "yamon env", - .size = 0x00020000, - .offset = 0, - .mask_flags = MTD_WRITEABLE}, - { - .name = "User FS", - .size = 0x003e0000, - .offset = 0x20000,}, - { - .name = "boot code", - .size = 0x100000, - .offset = 0x400000, - .mask_flags = MTD_WRITEABLE}, - { - .name = "raw/kernel", - .size = 0x300000, - .offset = 0x500000} -}; - -#elif defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1100) - -#if defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER) -/* both 32MB banks will be used. Combine the first 32MB bank and the - * first 28MB of the second bank together into a single jffs/jffs2 - * partition. - */ -#define WINDOW_ADDR 0x1C000000 -#define WINDOW_SIZE 0x4000000 -static struct mtd_partition pb1xxx_partitions[] = { - { - .name = "User FS", - .size = 0x3c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = 0x3c00000, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = 0x02c0000, - .offset = 0x3d00000 - } -}; -#elif defined(CONFIG_MTD_PB1500_BOOT) && !defined(CONFIG_MTD_PB1500_USER) -#define WINDOW_ADDR 0x1E000000 -#define WINDOW_SIZE 0x2000000 -static struct mtd_partition pb1xxx_partitions[] = { - { - .name = "User FS", - .size = 0x1c00000, - .offset = 0x0000000 - },{ - .name = "yamon", - .size = 0x0100000, - .offset = 0x1c00000, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = 0x02c0000, - .offset = 0x1d00000 - } -}; -#elif !defined(CONFIG_MTD_PB1500_BOOT) && defined(CONFIG_MTD_PB1500_USER) -#define WINDOW_ADDR 0x1C000000 -#define WINDOW_SIZE 0x2000000 -static struct mtd_partition pb1xxx_partitions[] = { - { - .name = "User FS", - .size = 0x1e00000, - .offset = 0x0000000 - },{ - .name = "raw kernel", - .size = 0x0200000, - .offset = 0x1e00000, - } -}; -#else -#error MTD_PB1500 define combo error /* should never happen */ -#endif -#else -#error Unsupported board -#endif - -#define NAME "Pb1x00 Linux Flash" -#define PADDR WINDOW_ADDR -#define BUSWIDTH 4 -#define SIZE WINDOW_SIZE -#define PARTITIONS 4 - -static struct map_info pb1xxx_mtd_map = { - .name = NAME, - .size = SIZE, - .bankwidth = BUSWIDTH, - .phys = PADDR, -}; - -static struct mtd_info *pb1xxx_mtd; - -int __init pb1xxx_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - char *part_type; - - /* - * Static partition definition selection - */ - part_type = "static"; - parts = pb1xxx_partitions; - nb_parts = ARRAY_SIZE(pb1xxx_partitions); - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "Pb1xxx flash: probing %d-bit flash bus\n", - BUSWIDTH*8); - pb1xxx_mtd_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); - - simple_map_init(&pb1xxx_mtd_map); - - pb1xxx_mtd = do_map_probe("cfi_probe", &pb1xxx_mtd_map); - if (!pb1xxx_mtd) return -ENXIO; - pb1xxx_mtd->owner = THIS_MODULE; - - add_mtd_partitions(pb1xxx_mtd, parts, nb_parts); - return 0; -} - -static void __exit pb1xxx_mtd_cleanup(void) -{ - if (pb1xxx_mtd) { - del_mtd_partitions(pb1xxx_mtd); - map_destroy(pb1xxx_mtd); - iounmap((void *) pb1xxx_mtd_map.virt); - } -} - -module_init(pb1xxx_mtd_init); -module_exit(pb1xxx_mtd_cleanup); - -MODULE_AUTHOR("Pete Popov"); -MODULE_DESCRIPTION("Pb1xxx CFI map driver"); -MODULE_LICENSE("GPL"); |
