diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0001.c | 87 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0002.c | 111 | ||||
-rw-r--r-- | drivers/mtd/chips/jedec_probe.c | 14 | ||||
-rw-r--r-- | drivers/mtd/devices/block2mtd.c | 93 | ||||
-rw-r--r-- | drivers/mtd/devices/pmc551.c | 4 | ||||
-rw-r--r-- | drivers/mtd/maps/Kconfig | 12 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_base.c | 6 | ||||
-rw-r--r-- | drivers/mtd/nand/sharpsl.c | 7 |
9 files changed, 246 insertions, 90 deletions
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 39edb82..7ea49a0 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -908,7 +908,7 @@ static void __xipram xip_enable(struct map_info *map, struct flchip *chip, static int __xipram xip_wait_for_operation( struct map_info *map, struct flchip *chip, - unsigned long adr, int *chip_op_time ) + unsigned long adr, unsigned int chip_op_time ) { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *cfip = cfi->cmdset_priv; @@ -917,7 +917,7 @@ static int __xipram xip_wait_for_operation( flstate_t oldstate, newstate; start = xip_currtime(); - usec = *chip_op_time * 8; + usec = chip_op_time * 8; if (usec == 0) usec = 500000; done = 0; @@ -1027,8 +1027,8 @@ static int __xipram xip_wait_for_operation( #define XIP_INVAL_CACHED_RANGE(map, from, size) \ INVALIDATE_CACHED_RANGE(map, from, size) -#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \ - xip_wait_for_operation(map, chip, cmd_adr, p_usec) +#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec) \ + xip_wait_for_operation(map, chip, cmd_adr, usec) #else @@ -1040,64 +1040,64 @@ static int __xipram xip_wait_for_operation( static int inval_cache_and_wait_for_operation( struct map_info *map, struct flchip *chip, unsigned long cmd_adr, unsigned long inval_adr, int inval_len, - int *chip_op_time ) + unsigned int chip_op_time) { struct cfi_private *cfi = map->fldrv_priv; map_word status, status_OK = CMD(0x80); - int z, chip_state = chip->state; - unsigned long timeo; + int chip_state = chip->state; + unsigned int timeo, sleep_time; spin_unlock(chip->mutex); if (inval_len) INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len); - if (*chip_op_time) - cfi_udelay(*chip_op_time); spin_lock(chip->mutex); - timeo = *chip_op_time * 8 * HZ / 1000000; - if (timeo < HZ/2) - timeo = HZ/2; - timeo += jiffies; + /* set our timeout to 8 times the expected delay */ + timeo = chip_op_time * 8; + if (!timeo) + timeo = 500000; + sleep_time = chip_op_time / 2; - z = 0; for (;;) { - if (chip->state != chip_state) { - /* Someone's suspended the operation: sleep */ - DECLARE_WAITQUEUE(wait, current); - - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - spin_unlock(chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - timeo = jiffies + (HZ / 2); /* FIXME */ - spin_lock(chip->mutex); - continue; - } - status = map_read(map, cmd_adr); if (map_word_andequal(map, status, status_OK, status_OK)) break; - /* OK Still waiting */ - if (time_after(jiffies, timeo)) { + if (!timeo) { map_write(map, CMD(0x70), cmd_adr); chip->state = FL_STATUS; return -ETIME; } - /* Latency issues. Drop the lock, wait a while and retry */ - z++; + /* OK Still waiting. Drop the lock, wait a while and retry. */ spin_unlock(chip->mutex); - cfi_udelay(1); + if (sleep_time >= 1000000/HZ) { + /* + * Half of the normal delay still remaining + * can be performed with a sleeping delay instead + * of busy waiting. + */ + msleep(sleep_time/1000); + timeo -= sleep_time; + sleep_time = 1000000/HZ; + } else { + udelay(1); + cond_resched(); + timeo--; + } spin_lock(chip->mutex); - } - if (!z) { - if (!--(*chip_op_time)) - *chip_op_time = 1; - } else if (z > 1) - ++(*chip_op_time); + if (chip->state != chip_state) { + /* Someone's suspended the operation: sleep */ + DECLARE_WAITQUEUE(wait, current); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + spin_unlock(chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + spin_lock(chip->mutex); + } + } /* Done and happy. */ chip->state = FL_STATUS; @@ -1107,8 +1107,7 @@ static int inval_cache_and_wait_for_operation( #endif #define WAIT_TIMEOUT(map, chip, adr, udelay) \ - ({ int __udelay = (udelay); \ - INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); }) + INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay); static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) @@ -1332,7 +1331,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, ret = INVAL_CACHE_AND_WAIT(map, chip, adr, adr, map_bankwidth(map), - &chip->word_write_time); + chip->word_write_time); if (ret) { xip_enable(map, chip, adr); printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); @@ -1569,7 +1568,7 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, adr, len, - &chip->buffer_write_time); + chip->buffer_write_time); if (ret) { map_write(map, CMD(0x70), cmd_adr); chip->state = FL_STATUS; @@ -1704,7 +1703,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, ret = INVAL_CACHE_AND_WAIT(map, chip, adr, adr, len, - &chip->erase_time); + chip->erase_time); if (ret) { map_write(map, CMD(0x70), adr); chip->state = FL_STATUS; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 9885726..ddc5bd7 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -45,9 +45,11 @@ #define MAX_WORD_RETRIES 3 #define MANUFACTURER_AMD 0x0001 +#define MANUFACTURER_ATMEL 0x001F #define MANUFACTURER_SST 0x00BF #define SST49LF004B 0x0060 #define SST49LF008A 0x005a +#define AT49BV6416 0x00d6 static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); @@ -68,6 +70,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr); #include "fwh_lock.h" +static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, size_t len); +static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); + static struct mtd_chip_driver cfi_amdstd_chipdrv = { .probe = NULL, /* Not usable directly */ .destroy = cfi_amdstd_destroy, @@ -161,6 +166,26 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) } } +/* Atmel chips don't use the same PRI format as AMD chips */ +static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + struct cfi_pri_atmel atmel_pri; + + memcpy(&atmel_pri, extp, sizeof(atmel_pri)); + memset(extp + 5, 0, sizeof(*extp) - 5); + + if (atmel_pri.Features & 0x02) + extp->EraseSuspend = 2; + + if (atmel_pri.BottomBoot) + extp->TopBottom = 2; + else + extp->TopBottom = 3; +} + static void fixup_use_secsi(struct mtd_info *mtd, void *param) { /* Setup for chips with a secsi area */ @@ -179,6 +204,16 @@ static void fixup_use_erase_chip(struct mtd_info *mtd, void *param) } +/* + * Some Atmel chips (e.g. the AT49BV6416) power-up with all sectors + * locked by default. + */ +static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param) +{ + mtd->lock = cfi_atmel_lock; + mtd->unlock = cfi_atmel_unlock; +} + static struct cfi_fixup cfi_fixup_table[] = { #ifdef AMD_BOOTLOC_BUG { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, @@ -192,6 +227,7 @@ static struct cfi_fixup cfi_fixup_table[] = { #if !FORCE_WORD_WRITE { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, #endif + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, { 0, 0, NULL, NULL } }; static struct cfi_fixup jedec_fixup_table[] = { @@ -207,6 +243,7 @@ static struct cfi_fixup fixup_table[] = { * we know that is the case. */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, { 0, 0, NULL, NULL } }; @@ -1607,6 +1644,80 @@ static int cfi_amdstd_erase_chip(struct mtd_info *mtd, struct erase_info *instr) return 0; } +static int do_atmel_lock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + spin_lock(chip->mutex); + ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + if (ret) + goto out_unlock; + chip->state = FL_LOCKING; + + DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n", + __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + map_write(map, CMD(0x40), chip->start + adr); + + chip->state = FL_READY; + put_chip(map, chip, adr + chip->start); + ret = 0; + +out_unlock: + spin_unlock(chip->mutex); + return ret; +} + +static int do_atmel_unlock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + spin_lock(chip->mutex); + ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING); + if (ret) + goto out_unlock; + chip->state = FL_UNLOCKING; + + DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): LOCK 0x%08lx len %d\n", + __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + map_write(map, CMD(0x70), adr); + + chip->state = FL_READY; + put_chip(map, chip, adr + chip->start); + ret = 0; + +out_unlock: + spin_unlock(chip->mutex); + return ret; +} + +static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + return cfi_varsize_frob(mtd, do_atmel_lock, ofs, len, NULL); +} + +static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL); +} + static void cfi_amdstd_sync (struct mtd_info *mtd) { diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 8f39d0a..1154dac 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -111,6 +111,7 @@ #define MX29LV040C 0x004F #define MX29LV160T 0x22C4 #define MX29LV160B 0x2249 +#define MX29F040 0x00A4 #define MX29F016 0x00AD #define MX29F002T 0x00B0 #define MX29F004T 0x0045 @@ -1172,6 +1173,19 @@ static const struct amd_flash_info jedec_table[] = { } }, { .mfr_id = MANUFACTURER_MACRONIX, + .dev_id = MX29F040, + .name = "Macronix MX29F040", + .uaddr = { + [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ + }, + .DevSize = SIZE_512KiB, + .CmdSet = P_ID_AMD_STD, + .NumEraseRegions= 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = MANUFACTURER_MACRONIX, .dev_id = MX29F016, .name = "Macronix MX29F016", .uaddr = { diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index ede3561..401c6a2 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -18,6 +18,7 @@ #include <linux/mtd/mtd.h> #include <linux/buffer_head.h> #include <linux/mutex.h> +#include <linux/mount.h> #define VERSION "$Revision: 1.30 $" @@ -236,6 +237,8 @@ static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf, } return 0; } + + static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) { @@ -299,6 +302,19 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) /* Get a handle on the device */ bdev = open_bdev_excl(devname, O_RDWR, NULL); +#ifndef MODULE + if (IS_ERR(bdev)) { + + /* We might not have rootfs mounted at this point. Try + to resolve the device name by other means. */ + + dev_t dev = name_to_dev_t(devname); + if (dev != 0) { + bdev = open_by_devnum(dev, FMODE_WRITE | FMODE_READ); + } + } +#endif + if (IS_ERR(bdev)) { ERROR("error: cannot open device %s", devname); goto devinit_err; @@ -393,26 +409,6 @@ static int parse_num(size_t *num, const char *token) } -static int parse_name(char **pname, const char *token, size_t limit) -{ - size_t len; - char *name; - - len = strlen(token) + 1; - if (len > limit) - return -ENOSPC; - - name = kmalloc(len, GFP_KERNEL); - if (!name) - return -ENOMEM; - - strcpy(name, token); - - *pname = name; - return 0; -} - - static inline void kill_final_newline(char *str) { char *newline = strrchr(str, '\n'); @@ -426,9 +422,15 @@ static inline void kill_final_newline(char *str) return 0; \ } while (0) -static int block2mtd_setup(const char *val, struct kernel_param *kp) +#ifndef MODULE +static int block2mtd_init_called = 0; +static __initdata char block2mtd_paramline[80 + 12]; /* 80 for device, 12 for erase size */ +#endif + + +static int block2mtd_setup2(const char *val) { - char buf[80+12]; /* 80 for device, 12 for erase size */ + char buf[80 + 12]; /* 80 for device, 12 for erase size */ char *str = buf; char *token[2]; char *name; @@ -450,13 +452,9 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp) if (!token[0]) parse_err("no argument"); - ret = parse_name(&name, token[0], 80); - if (ret == -ENOMEM) - parse_err("out of memory"); - if (ret == -ENOSPC) - parse_err("name too long"); - if (ret) - return 0; + name = token[0]; + if (strlen(name) + 1 > 80) + parse_err("device name too long"); if (token[1]) { ret = parse_num(&erase_size, token[1]); @@ -472,13 +470,48 @@ static int block2mtd_setup(const char *val, struct kernel_param *kp) } +static int block2mtd_setup(const char *val, struct kernel_param *kp) +{ +#ifdef MODULE + return block2mtd_setup2(val); +#else + /* If more parameters are later passed in via + /sys/module/block2mtd/parameters/block2mtd + and block2mtd_init() has already been called, + we can parse the argument now. */ + + if (block2mtd_init_called) + return block2mtd_setup2(val); + + /* During early boot stage, we only save the parameters + here. We must parse them later: if the param passed + from kernel boot command line, block2mtd_setup() is + called so early that it is not possible to resolve + the device (even kmalloc() fails). Deter that work to + block2mtd_setup2(). */ + + strlcpy(block2mtd_paramline, val, sizeof(block2mtd_paramline)); + + return 0; +#endif +} + + module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200); MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\""); static int __init block2mtd_init(void) { + int ret = 0; INFO("version " VERSION); - return 0; + +#ifndef MODULE + if (strlen(block2mtd_paramline)) + ret = block2mtd_setup2(block2mtd_paramline); + block2mtd_init_called = 1; +#endif + + return ret; } diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 6f9bbf6..2c01497 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -99,10 +99,6 @@ #include <asm/system.h> #include <linux/pci.h> -#ifndef CONFIG_PCI -#error Enable PCI in your kernel config -#endif - #include <linux/mtd/mtd.h> #include <linux/mtd/pmc551.h> #include <linux/mtd/compatmac.h> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 83d0b2a..64d1b6a 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -13,13 +13,13 @@ config MTD_COMPLEX_MAPPINGS config MTD_PHYSMAP tristate "CFI Flash device in physical memory map" - depends on MTD_CFI + depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM help - This provides a 'mapping' driver which allows the CFI probe and - command set driver code to communicate with flash chips which - are mapped physically into the CPU's memory. You will need to - configure the physical address and size of the flash chips on - your particular board as well as the bus width, either statically + This provides a 'mapping' driver which allows the NOR Flash and + ROM driver code to communicate with chips which are mapped + physically into the CPU's memory. You will need to configure + the physical address and size of the flash chips on your + particular board as well as the bus width, either statically with config options or at run-time. config MTD_PHYSMAP_START diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3db77ee..c99302e 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -11,7 +11,7 @@ config MTD_NAND help This enables support for accessing all type of NAND flash devices. For further information see - <http://www.linux-mtd.infradead.org/tech/nand.html>. + <http://www.linux-mtd.infradead.org/doc/nand.html>. config MTD_NAND_VERIFY_WRITE bool "Verify NAND page writes" diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index c8cbc00..975b2ef 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1204,7 +1204,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd, pos = steps * (eccsize + chunk); steps = 0; } else - pos = eccsize + chunk; + pos = eccsize; chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); for (i = 0; i < steps; i++) { @@ -1567,7 +1567,7 @@ static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, bytes = min_t(size_t, len, free->length); boffs = free->offset; } - memcpy(chip->oob_poi + woffs, oob, bytes); + memcpy(chip->oob_poi + boffs, oob, bytes); oob += bytes; } return oob; @@ -2224,7 +2224,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, } /* Try to identify manufacturer */ - for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_id++) { + for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) { if (nand_manuf_ids[maf_idx].id == *maf_id) break; } diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index fbeedc3..51c7288 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -78,7 +78,7 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = { /* * hardware specific access to control-lines * ctrl: - * NAND_CNE: bit 0 -> bit 0 & 4 + * NAND_CNE: bit 0 -> ! bit 0 & 4 * NAND_CLE: bit 1 -> bit 1 * NAND_ALE: bit 2 -> bit 2 * @@ -92,7 +92,10 @@ static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned char bits = ctrl & 0x07; bits |= (ctrl & 0x01) << 4; - writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL); + + bits ^= 0x11; + + writeb((readb(FLASHCTL) & ~0x17) | bits, FLASHCTL); } if (cmd != NAND_CMD_NONE) |