summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/bcm47xxpart.c161
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.c30
-rw-r--r--drivers/mtd/devices/bcm47xxsflash.h3
-rw-r--r--drivers/mtd/devices/m25p80.c9
-rw-r--r--drivers/mtd/devices/serial_flash_cmds.h7
-rw-r--r--drivers/mtd/devices/st_spi_fsm.c28
-rw-r--r--drivers/mtd/maps/Kconfig12
-rw-r--r--drivers/mtd/maps/Makefile7
-rw-r--r--drivers/mtd/maps/ichxrom.c6
-rw-r--r--drivers/mtd/maps/lantiq-flash.c4
-rw-r--r--drivers/mtd/maps/physmap_of.c9
-rw-r--r--drivers/mtd/maps/physmap_of_gemini.c117
-rw-r--r--drivers/mtd/maps/physmap_of_gemini.h16
-rw-r--r--drivers/mtd/maps/physmap_of_versatile.c1
-rw-r--r--drivers/mtd/maps/pmcmsp-flash.c4
-rw-r--r--drivers/mtd/mtdchar.c2
-rw-r--r--drivers/mtd/mtdcore.c6
-rw-r--r--drivers/mtd/mtdpart.c11
-rw-r--r--drivers/mtd/nand/Kconfig2
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c8
-rw-r--r--drivers/mtd/nand/fsmc_nand.c153
-rw-r--r--drivers/mtd/nand/lpc32xx_slc.c9
-rw-r--r--drivers/mtd/nand/mtk_nand.c1
-rw-r--r--drivers/mtd/nand/nand_base.c40
-rw-r--r--drivers/mtd/nand/nand_ids.c1
-rw-r--r--drivers/mtd/nand/sunxi_nand.c36
-rw-r--r--drivers/mtd/nand/xway_nand.c2
-rw-r--r--drivers/mtd/ofpart.c1
-rw-r--r--drivers/mtd/spi-nor/Kconfig32
-rw-r--r--drivers/mtd/spi-nor/Makefile3
-rw-r--r--drivers/mtd/spi-nor/aspeed-smc.c754
-rw-r--r--drivers/mtd/spi-nor/cadence-quadspi.c10
-rw-r--r--drivers/mtd/spi-nor/fsl-quadspi.c48
-rw-r--r--drivers/mtd/spi-nor/intel-spi-platform.c57
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c777
-rw-r--r--drivers/mtd/spi-nor/intel-spi.h24
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c275
37 files changed, 2460 insertions, 206 deletions
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 283ff7e..d10fa6c 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -9,6 +9,7 @@
*
*/
+#include <linux/bcm47xx_nvram.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -83,6 +84,91 @@ out_default:
return "rootfs";
}
+static int bcm47xxpart_parse_trx(struct mtd_info *master,
+ struct mtd_partition *trx,
+ struct mtd_partition *parts,
+ size_t parts_len)
+{
+ struct trx_header header;
+ size_t bytes_read;
+ int curr_part = 0;
+ int i, err;
+
+ if (parts_len < 3) {
+ pr_warn("No enough space to add TRX partitions!\n");
+ return -ENOMEM;
+ }
+
+ err = mtd_read(master, trx->offset, sizeof(header), &bytes_read,
+ (uint8_t *)&header);
+ if (err && !mtd_is_bitflip(err)) {
+ pr_err("mtd_read error while reading TRX header: %d\n", err);
+ return err;
+ }
+
+ i = 0;
+
+ /* We have LZMA loader if offset[2] points to sth */
+ if (header.offset[2]) {
+ bcm47xxpart_add_part(&parts[curr_part++], "loader",
+ trx->offset + header.offset[i], 0);
+ i++;
+ }
+
+ if (header.offset[i]) {
+ bcm47xxpart_add_part(&parts[curr_part++], "linux",
+ trx->offset + header.offset[i], 0);
+ i++;
+ }
+
+ if (header.offset[i]) {
+ size_t offset = trx->offset + header.offset[i];
+ const char *name = bcm47xxpart_trx_data_part_name(master,
+ offset);
+
+ bcm47xxpart_add_part(&parts[curr_part++], name, offset, 0);
+ i++;
+ }
+
+ /*
+ * Assume that every partition ends at the beginning of the one it is
+ * followed by.
+ */
+ for (i = 0; i < curr_part; i++) {
+ u64 next_part_offset = (i < curr_part - 1) ?
+ parts[i + 1].offset :
+ trx->offset + trx->size;
+
+ parts[i].size = next_part_offset - parts[i].offset;
+ }
+
+ return curr_part;
+}
+
+/**
+ * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader
+ *
+ * Some devices may have more than one TRX partition. In such case one of them
+ * is the main one and another a failsafe one. Bootloader may fallback to the
+ * failsafe firmware if it detects corruption of the main image.
+ *
+ * This function provides info about currently used TRX partition. It's the one
+ * containing kernel started by the bootloader.
+ */
+static int bcm47xxpart_bootpartition(void)
+{
+ char buf[4];
+ int bootpartition;
+
+ /* Check CFE environment variable */
+ if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) {
+ if (!kstrtoint(buf, 0, &bootpartition))
+ return bootpartition;
+ }
+
+ return 0;
+}
+
static int bcm47xxpart_parse(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
@@ -93,9 +179,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
size_t bytes_read;
uint32_t offset;
uint32_t blocksize = master->erasesize;
- struct trx_header *trx;
- int trx_part = -1;
- int last_trx_part = -1;
+ int trx_parts[2]; /* Array with indexes of TRX partitions */
+ int trx_num = 0; /* Number of found TRX partitions */
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
int err;
@@ -182,54 +267,18 @@ static int bcm47xxpart_parse(struct mtd_info *master,
/* TRX */
if (buf[0x000 / 4] == TRX_MAGIC) {
- if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
- pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
- break;
- }
-
- trx = (struct trx_header *)buf;
+ struct trx_header *trx;
- trx_part = curr_part;
+ if (trx_num >= ARRAY_SIZE(trx_parts))
+ pr_warn("No enough space to store another TRX found at 0x%X\n",
+ offset);
+ else
+ trx_parts[trx_num++] = curr_part;
bcm47xxpart_add_part(&parts[curr_part++], "firmware",
offset, 0);
- i = 0;
- /* We have LZMA loader if offset[2] points to sth */
- if (trx->offset[2]) {
- bcm47xxpart_add_part(&parts[curr_part++],
- "loader",
- offset + trx->offset[i],
- 0);
- i++;
- }
-
- if (trx->offset[i]) {
- bcm47xxpart_add_part(&parts[curr_part++],
- "linux",
- offset + trx->offset[i],
- 0);
- i++;
- }
-
- /*
- * Pure rootfs size is known and can be calculated as:
- * trx->length - trx->offset[i]. We don't fill it as
- * we want to have jffs2 (overlay) in the same mtd.
- */
- if (trx->offset[i]) {
- const char *name;
-
- name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
- bcm47xxpart_add_part(&parts[curr_part++],
- name,
- offset + trx->offset[i],
- 0);
- i++;
- }
-
- last_trx_part = curr_part - 1;
-
/* Jump to the end of TRX */
+ trx = (struct trx_header *)buf;
offset = roundup(offset + trx->length, blocksize);
/* Next loop iteration will increase the offset */
offset -= blocksize;
@@ -307,9 +356,23 @@ static int bcm47xxpart_parse(struct mtd_info *master,
parts[i + 1].offset : master->size;
parts[i].size = next_part_offset - parts[i].offset;
- if (i == last_trx_part && trx_part >= 0)
- parts[trx_part].size = next_part_offset -
- parts[trx_part].offset;
+ }
+
+ /* If there was TRX parse it now */
+ for (i = 0; i < trx_num; i++) {
+ struct mtd_partition *trx = &parts[trx_parts[i]];
+
+ if (i == bcm47xxpart_bootpartition()) {
+ int num_parts;
+
+ num_parts = bcm47xxpart_parse_trx(master, trx,
+ parts + curr_part,
+ BCM47XXPART_MAX_PARTS - curr_part);
+ if (num_parts > 0)
+ curr_part += num_parts;
+ } else {
+ trx->name = "failsafe";
+ }
}
*pparts = parts;
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 514be04..e2bd818 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -105,15 +105,33 @@ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct bcm47xxsflash *b47s = mtd->priv;
+ size_t orig_len = len;
/* Check address range */
if ((from + len) > mtd->size)
return -EINVAL;
- memcpy_fromio(buf, b47s->window + from, len);
- *retlen = len;
+ /* Read as much as possible using fast MMIO window */
+ if (from < BCM47XXSFLASH_WINDOW_SZ) {
+ size_t memcpy_len;
- return len;
+ memcpy_len = min(len, (size_t)(BCM47XXSFLASH_WINDOW_SZ - from));
+ memcpy_fromio(buf, b47s->window + from, memcpy_len);
+ from += memcpy_len;
+ len -= memcpy_len;
+ buf += memcpy_len;
+ }
+
+ /* Use indirect access for content out of the window */
+ for (; len; len--) {
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, from++);
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_READ4B);
+ *buf++ = b47s->cc_read(b47s, BCMA_CC_FLASHDATA);
+ }
+
+ *retlen = orig_len;
+
+ return orig_len;
}
static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
@@ -284,7 +302,6 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
b47s = devm_kzalloc(dev, sizeof(*b47s), GFP_KERNEL);
if (!b47s)
return -ENOMEM;
- sflash->priv = b47s;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -334,6 +351,8 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
b47s->size = sflash->size;
bcm47xxsflash_fill_mtd(b47s, &pdev->dev);
+ platform_set_drvdata(pdev, b47s);
+
err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
@@ -349,8 +368,7 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
{
- struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
- struct bcm47xxsflash *b47s = sflash->priv;
+ struct bcm47xxsflash *b47s = platform_get_drvdata(pdev);
mtd_device_unregister(&b47s->mtd);
iounmap(b47s->window);
diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h
index 1564b62..b2d7b38 100644
--- a/drivers/mtd/devices/bcm47xxsflash.h
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -3,6 +3,8 @@
#include <linux/mtd/mtd.h>
+#define BCM47XXSFLASH_WINDOW_SZ SZ_16M
+
/* Used for ST flashes only. */
#define OPCODE_ST_WREN 0x0006 /* Write Enable */
#define OPCODE_ST_WRDIS 0x0004 /* Write Disable */
@@ -16,6 +18,7 @@
#define OPCODE_ST_RES 0x03ab /* Read Electronic Signature */
#define OPCODE_ST_CSA 0x1000 /* Keep chip select asserted */
#define OPCODE_ST_SSE 0x0220 /* Sub-sector Erase */
+#define OPCODE_ST_READ4B 0x6313 /* Read Data Bytes in 4Byte addressing mode */
/* Used for Atmel flashes only. */
#define OPCODE_AT_READ 0x07e8
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 9cf7fcd..c4df3b1 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -172,7 +172,8 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
t[1].rx_buf = buf;
t[1].rx_nbits = m25p80_rx_nbits(nor);
- t[1].len = min(len, spi_max_transfer_size(spi));
+ t[1].len = min3(len, spi_max_transfer_size(spi),
+ spi_max_message_size(spi) - t[0].len);
spi_message_add_tail(&t[1], &m);
ret = spi_sync(spi, &m);
@@ -288,7 +289,6 @@ static const struct spi_device_id m25p_ids[] = {
* should be kept for backward compatibility.
*/
{"at25df321a"}, {"at25df641"}, {"at26df081a"},
- {"mr25h256"},
{"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
{"mx25l25635e"},{"mx66l51235l"},
{"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
@@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = {
{"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
{"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
+ /* Everspin MRAMs (non-JEDEC) */
+ { "mr25h256" }, /* 256 Kib, 40 MHz */
+ { "mr25h10" }, /* 1 Mib, 40 MHz */
+ { "mr25h40" }, /* 4 Mib, 40 MHz */
+
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h
index f59a125..8b81e15 100644
--- a/drivers/mtd/devices/serial_flash_cmds.h
+++ b/drivers/mtd/devices/serial_flash_cmds.h
@@ -18,19 +18,12 @@
#define SPINOR_OP_RDVCR 0x85
/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
-#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
-#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
-
#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
-/* READ commands with 32-bit addressing */
-#define SPINOR_OP_READ4_1_2_2 0xbc
-#define SPINOR_OP_READ4_1_4_4 0xec
-
/* Configuration flags */
#define FLASH_FLAG_SINGLE 0x000000ff
#define FLASH_FLAG_READ_WRITE 0x00000001
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 5454b41..804313a 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -507,13 +507,13 @@ static struct seq_rw_config n25q_read3_configs[] = {
* - 'FAST' variants configured for 8 dummy cycles (see note above.)
*/
static struct seq_rw_config n25q_read4_configs[] = {
- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
- {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
/*
@@ -553,13 +553,13 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
* entering a state that is incompatible with the SPIBoot Controller.
*/
static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
- {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
- {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
- {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
- {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
- {FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
- {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
- {0x00, 0, 0, 0, 0, 0x00, 0, 0},
+ {FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B, 0, 4, 4, 0x00, 2, 4},
+ {FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B, 0, 1, 4, 0x00, 0, 8},
+ {FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B, 0, 2, 2, 0x00, 4, 0},
+ {FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B, 0, 1, 2, 0x00, 0, 8},
+ {FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST_4B, 0, 1, 1, 0x00, 0, 8},
+ {FLASH_FLAG_READ_WRITE, SPINOR_OP_READ_4B, 0, 1, 1, 0x00, 0, 0},
+ {0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 5bcc896..542fdf8 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -75,7 +75,7 @@ config MTD_PHYSMAP_OF
taken from OF device tree.
config MTD_PHYSMAP_OF_VERSATILE
- bool "Support ARM Versatile physmap OF"
+ bool "ARM Versatile OF-based physical memory map handling"
depends on MTD_PHYSMAP_OF
depends on MFD_SYSCON
default y if (ARCH_INTEGRATOR || ARCH_VERSATILE || ARCH_REALVIEW)
@@ -84,6 +84,16 @@ config MTD_PHYSMAP_OF_VERSATILE
platforms, basically to add a VPP (write protection) callback so
the flash can be taken out of write protection.
+config MTD_PHYSMAP_OF_GEMINI
+ bool "Cortina Gemini OF-based physical memory map handling"
+ depends on MTD_PHYSMAP_OF
+ depends on MFD_SYSCON
+ default ARCH_GEMINI
+ help
+ This provides some extra DT physmap parsing for the Gemini
+ platforms, some detection and setting up parallel mode on the
+ external interface.
+
config MTD_PMC_MSP_EVM
tristate "CFI Flash device mapped on PMC-Sierra MSP"
depends on PMC_MSP && MTD_CFI
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 644f7d3..aef1846 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -17,10 +17,13 @@ obj-$(CONFIG_MTD_CK804XROM) += ck804xrom.o
obj-$(CONFIG_MTD_TSUNAMI) += tsunami_flash.o
obj-$(CONFIG_MTD_PXA2XX) += pxa2xx-flash.o
obj-$(CONFIG_MTD_PHYSMAP) += physmap.o
-obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
ifdef CONFIG_MTD_PHYSMAP_OF_VERSATILE
-obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of_versatile.o
+physmap_of-objs += physmap_of_versatile.o
+endif
+ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI
+physmap_of-objs += physmap_of_gemini.o
endif
+obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PISMO) += pismo.o
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index e17d02a..976d42f 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -57,10 +57,12 @@ static void ichxrom_cleanup(struct ichxrom_window *window)
{
struct ichxrom_map_info *map, *scratch;
u16 word;
+ int ret;
/* Disable writes through the rom window */
- pci_read_config_word(window->pdev, BIOS_CNTL, &word);
- pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
+ ret = pci_read_config_word(window->pdev, BIOS_CNTL, &word);
+ if (!ret)
+ pci_write_config_word(window->pdev, BIOS_CNTL, word & ~1);
pci_dev_put(window->pdev);
/* Free all of the mtd devices */
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index c8febb3..3e33ab6 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -4,7 +4,7 @@
* by the Free Software Foundation.
*
* Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2010 John Crispin <john@phrozen.org>
*/
#include <linux/err.h>
@@ -209,5 +209,5 @@ static struct platform_driver ltq_mtd_driver = {
module_platform_driver(ltq_mtd_driver);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
MODULE_DESCRIPTION("Lantiq SoC NOR");
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 3fad359..14e8909 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -24,6 +24,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include "physmap_of_gemini.h"
#include "physmap_of_versatile.h"
struct of_flash_list {
@@ -241,11 +242,13 @@ static int of_flash_probe(struct platform_device *dev)
info->list[i].map.size = res_size;
info->list[i].map.bankwidth = be32_to_cpup(width);
info->list[i].map.device_node = dp;
+
+ err = of_flash_probe_gemini(dev, dp, &info->list[i].map);
+ if (err)
+ return err;
err = of_flash_probe_versatile(dev, dp, &info->list[i].map);
- if (err) {
- dev_err(&dev->dev, "Can't probe Versatile VPP\n");
+ if (err)
return err;
- }
err = -ENOMEM;
info->list[i].map.virt = ioremap(info->list[i].map.phys,
diff --git a/drivers/mtd/maps/physmap_of_gemini.c b/drivers/mtd/maps/physmap_of_gemini.c
new file mode 100644
index 0000000..9d371cd
--- /dev/null
+++ b/drivers/mtd/maps/physmap_of_gemini.c
@@ -0,0 +1,117 @@
+/*
+ * Cortina Systems Gemini OF physmap add-on
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This SoC has an elaborate flash control register, so we need to
+ * detect and set it up when booting on this platform.
+ */
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mtd/map.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include "physmap_of_gemini.h"
+
+/*
+ * The Flash-relevant parts of the global status register
+ * These would also be relevant for a NAND driver.
+ */
+#define GLOBAL_STATUS 0x04
+#define FLASH_TYPE_MASK (0x3 << 24)
+#define FLASH_TYPE_NAND_2K (0x3 << 24)
+#define FLASH_TYPE_NAND_512 (0x2 << 24)
+#define FLASH_TYPE_PARALLEL (0x1 << 24)
+#define FLASH_TYPE_SERIAL (0x0 << 24)
+/* if parallel */
+#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
+/* if serial */
+#define FLASH_ATMEL (1 << 23) /* else STM */
+
+#define FLASH_SIZE_MASK (0x3 << 21)
+#define NAND_256M (0x3 << 21) /* and more */
+#define NAND_128M (0x2 << 21)
+#define NAND_64M (0x1 << 21)
+#define NAND_32M (0x0 << 21)
+#define ATMEL_16M (0x3 << 21) /* and more */
+#define ATMEL_8M (0x2 << 21)
+#define ATMEL_4M_2M (0x1 << 21)
+#define ATMEL_1M (0x0 << 21) /* and less */
+#define STM_32M (1 << 22) /* and more */
+#define STM_16M (0 << 22) /* and less */
+
+#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
+
+/* Miscellaneous Control Register */
+#define GLOBAL_MISC_CTRL 0x30
+#define FLASH_PADS_MASK 0x07
+#define NAND_PADS_DISABLE BIT(2)
+#define PFLASH_PADS_DISABLE BIT(1)
+#define SFLASH_PADS_DISABLE BIT(0)
+
+static const struct of_device_id syscon_match[] = {
+ { .compatible = "cortina,gemini-syscon" },
+ { },
+};
+
+int of_flash_probe_gemini(struct platform_device *pdev,
+ struct device_node *np,
+ struct map_info *map)
+{
+ static struct regmap *rmap;
+ struct device *dev = &pdev->dev;
+ u32 val;
+ int ret;
+
+ /* Multiplatform guard */
+ if (!of_device_is_compatible(np, "cortina,gemini-flash"))
+ return 0;
+
+ rmap = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(rmap)) {
+ dev_err(dev, "no syscon\n");
+ return PTR_ERR(rmap);
+ }
+
+ ret = regmap_read(rmap, GLOBAL_STATUS, &val);
+ if (ret) {
+ dev_err(dev, "failed to read global status register\n");
+ return -ENODEV;
+ }
+ dev_dbg(dev, "global status reg: %08x\n", val);
+
+ /*
+ * It would be contradictory if a physmap flash was NOT parallel.
+ */
+ if ((val & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL) {
+ dev_err(dev, "flash is not parallel\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Complain if DT data and hardware definition is different.
+ */
+ if (val & FLASH_WIDTH_16BIT) {
+ if (map->bankwidth != 2)
+ dev_warn(dev, "flash hardware say flash is 16 bit wide but DT says it is %d bits wide\n",
+ map->bankwidth * 8);
+ } else {
+ if (map->bankwidth != 1)
+ dev_warn(dev, "flash hardware say flash is 8 bit wide but DT says it is %d bits wide\n",
+ map->bankwidth * 8);
+ }
+
+ /* Activate parallel (NOR flash) mode */
+ ret = regmap_update_bits(rmap, GLOBAL_MISC_CTRL,
+ FLASH_PADS_MASK,
+ SFLASH_PADS_DISABLE | NAND_PADS_DISABLE);
+ if (ret) {
+ dev_err(dev, "unable to set up physmap pads\n");
+ return -ENODEV;
+ }
+
+ dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
+
+ return 0;
+}
diff --git a/drivers/mtd/maps/physmap_of_gemini.h b/drivers/mtd/maps/physmap_of_gemini.h
new file mode 100644
index 0000000..c675025
--- /dev/null
+++ b/drivers/mtd/maps/physmap_of_gemini.h
@@ -0,0 +1,16 @@
+#include <linux/of.h>
+#include <linux/mtd/map.h>
+
+#ifdef CONFIG_MTD_PHYSMAP_OF_GEMINI
+int of_flash_probe_gemini(struct platform_device *pdev,
+ struct device_node *np,
+ struct map_info *map);
+#else
+static inline
+int of_flash_probe_gemini(struct platform_device *pdev,
+ struct device_node *np,
+ struct map_info *map)
+{
+ return 0;
+}
+#endif
diff --git a/drivers/mtd/maps/physmap_of_versatile.c b/drivers/mtd/maps/physmap_of_versatile.c
index 0f39b2a..8c6ccde 100644
--- a/drivers/mtd/maps/physmap_of_versatile.c
+++ b/drivers/mtd/maps/physmap_of_versatile.c
@@ -252,4 +252,3 @@ int of_flash_probe_versatile(struct platform_device *pdev,
return 0;
}
-EXPORT_SYMBOL_GPL(of_flash_probe_versatile);
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index f9fa3fa..2051f28 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -139,15 +139,13 @@ static int __init init_msp_flash(void)
}
msp_maps[i].bankwidth = 1;
- msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+ msp_maps[i].name = kstrndup(flash_name, 7, GFP_KERNEL);
if (!msp_maps[i].name) {
iounmap(msp_maps[i].virt);
kfree(msp_parts[i]);
goto cleanup_loop;
}
- msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
-
for (j = 0; j < pcnt; j++) {
part_name[5] = '0' + i;
part_name[7] = '0' + j;
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index ce5ccc5..3568294 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -451,7 +451,7 @@ static int mtdchar_readoob(struct file *file, struct mtd_info *mtd,
* data. For our userspace tools it is important to dump areas
* with ECC errors!
* For kernel internal usage it also might return -EUCLEAN
- * to signal the caller that a bitflip has occured and has
+ * to signal the caller that a bitflip has occurred and has
* been corrected by the ECC algorithm.
*
* Note: currently the standard NAND function, nand_read_oob_std,
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 052772f..66a9ded 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1128,7 +1128,7 @@ EXPORT_SYMBOL_GPL(mtd_write_oob);
* @oobecc: OOB region struct filled with the appropriate ECC position
* information
*
- * This functions return ECC section information in the OOB area. I you want
+ * This function returns ECC section information in the OOB area. If you want
* to get all the ECC bytes information, then you should call
* mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE.
*
@@ -1160,7 +1160,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
* @oobfree: OOB region struct filled with the appropriate free position
* information
*
- * This functions return free bytes position in the OOB area. I you want
+ * This function returns free bytes position in the OOB area. If you want
* to get all the free bytes information, then you should call
* mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE.
*
@@ -1190,7 +1190,7 @@ EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
* @iter: iterator function. Should be either mtd_ooblayout_free or
* mtd_ooblayout_ecc depending on the region type you're searching for
*
- * This functions returns the section id and oobregion information of a
+ * This function returns the section id and oobregion information of a
* specific byte. For example, say you want to know where the 4th ECC byte is
* stored, you'll use:
*
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index fccdd49..ea5e530 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -349,6 +349,14 @@ static const struct mtd_ooblayout_ops part_ooblayout_ops = {
.free = part_ooblayout_free,
};
+static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ struct mtd_part *part = mtd_to_part(mtd);
+
+ return part->master->_max_bad_blocks(part->master,
+ ofs + part->offset, len);
+}
+
static inline void free_partition(struct mtd_part *p)
{
kfree(p->mtd.name);
@@ -424,6 +432,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) ?
&master->dev :
master->dev.parent;
+ slave->mtd.dev.of_node = part->of_node;
slave->mtd._read = part_read;
slave->mtd._write = part_write;
@@ -475,6 +484,8 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
slave->mtd._block_isbad = part_block_isbad;
if (master->_block_markbad)
slave->mtd._block_markbad = part_block_markbad;
+ if (master->_max_bad_blocks)
+ slave->mtd._max_bad_blocks = part_max_bad_blocks;
if (master->_get_device)
slave->mtd._get_device = part_get_device;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 9ce5dcb..6d4d567 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -426,6 +426,7 @@ config MTD_NAND_ORION
config MTD_NAND_OXNAS
tristate "NAND Flash support for Oxford Semiconductor SoC"
+ depends on ARCH_OXNAS || COMPILE_TEST
depends on HAS_IOMEM
help
This enables the NAND flash controller on Oxford Semiconductor SoCs.
@@ -535,6 +536,7 @@ config MTD_NAND_JZ4780
config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC"
+ depends on OF
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
help
Enables support for NAND Flash chips on the ST Microelectronics
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 0a177b1..d1570f5 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -258,9 +258,15 @@ static void fsl_ifc_run_command(struct mtd_info *mtd)
int bufnum = nctrl->page & priv->bufnum_mask;
int sector = bufnum * chip->ecc.steps;
int sector_end = sector + chip->ecc.steps - 1;
+ __be32 *eccstat_regs;
+
+ if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
+ eccstat_regs = ifc->ifc_nand.v2_nand_eccstat;
+ else
+ eccstat_regs = ifc->ifc_nand.v1_nand_eccstat;
for (i = sector / 4; i <= sector_end / 4; i++)
- eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
+ eccstat[i] = ifc_in32(&eccstat_regs[i]);
for (i = sector; i <= sector_end; i++) {
errors = check_read_ecc(mtd, ctrl, eccstat, i);
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 4924b43..bda1e46 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -35,10 +35,133 @@
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <linux/mtd/fsmc.h>
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
+#define FSMC_NAND_BW8 1
+#define FSMC_NAND_BW16 2
+
+#define FSMC_MAX_NOR_BANKS 4
+#define FSMC_MAX_NAND_BANKS 4
+
+#define FSMC_FLASH_WIDTH8 1
+#define FSMC_FLASH_WIDTH16 2
+
+/* fsmc controller registers for NOR flash */
+#define CTRL 0x0
+ /* ctrl register definitions */
+ #define BANK_ENABLE (1 << 0)
+ #define MUXED (1 << 1)
+ #define NOR_DEV (2 << 2)
+ #define WIDTH_8 (0 << 4)
+ #define WIDTH_16 (1 << 4)
+ #define RSTPWRDWN (1 << 6)
+ #define WPROT (1 << 7)
+ #define WRT_ENABLE (1 << 12)
+ #define WAIT_ENB (1 << 13)
+
+#define CTRL_TIM 0x4
+ /* ctrl_tim register definitions */
+
+#define FSMC_NOR_BANK_SZ 0x8
+#define FSMC_NOR_REG_SIZE 0x40
+
+#define FSMC_NOR_REG(base, bank, reg) (base + \
+ FSMC_NOR_BANK_SZ * (bank) + \
+ reg)
+
+/* fsmc controller registers for NAND flash */
+#define PC 0x00
+ /* pc register definitions */
+ #define FSMC_RESET (1 << 0)
+ #define FSMC_WAITON (1 << 1)
+ #define FSMC_ENABLE (1 << 2)
+ #define FSMC_DEVTYPE_NAND (1 << 3)
+ #define FSMC_DEVWID_8 (0 << 4)
+ #define FSMC_DEVWID_16 (1 << 4)
+ #define FSMC_ECCEN (1 << 6)
+ #define FSMC_ECCPLEN_512 (0 << 7)
+ #define FSMC_ECCPLEN_256 (1 << 7)
+ #define FSMC_TCLR_1 (1)
+ #define FSMC_TCLR_SHIFT (9)
+ #define FSMC_TCLR_MASK (0xF)
+ #define FSMC_TAR_1 (1)
+ #define FSMC_TAR_SHIFT (13)
+ #define FSMC_TAR_MASK (0xF)
+#define STS 0x04
+ /* sts register definitions */
+ #define FSMC_CODE_RDY (1 << 15)
+#define COMM 0x08
+ /* comm register definitions */
+ #define FSMC_TSET_0 0
+ #define FSMC_TSET_SHIFT 0
+ #define FSMC_TSET_MASK 0xFF
+ #define FSMC_TWAIT_6 6
+ #define FSMC_TWAIT_SHIFT 8
+ #define FSMC_TWAIT_MASK 0xFF
+ #define FSMC_THOLD_4 4
+ #define FSMC_THOLD_SHIFT 16
+ #define FSMC_THOLD_MASK 0xFF
+ #define FSMC_THIZ_1 1
+ #define FSMC_THIZ_SHIFT 24
+ #define FSMC_THIZ_MASK 0xFF
+#define ATTRIB 0x0C
+#define IOATA 0x10
+#define ECC1 0x14
+#define ECC2 0x18
+#define ECC3 0x1C
+#define FSMC_NAND_BANK_SZ 0x20
+
+#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
+ (FSMC_NAND_BANK_SZ * (bank)) + \
+ reg)
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+struct fsmc_nand_timings {
+ uint8_t tclr;
+ uint8_t tar;
+ uint8_t thiz;
+ uint8_t thold;
+ uint8_t twait;
+ uint8_t tset;
+};
+
+enum access_mode {
+ USE_DMA_ACCESS = 1,
+ USE_WORD_ACCESS,
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @nand_timings: timing setup for the physical NAND interface
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+ struct fsmc_nand_timings *nand_timings;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ unsigned int options;
+ unsigned int width;
+ unsigned int bank;
+
+ enum access_mode mode;
+
+ void (*select_bank)(uint32_t bank, uint32_t busw);
+
+ /* priv structures for dma accesses */
+ void *read_dma_priv;
+ void *write_dma_priv;
+};
+
static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
@@ -714,7 +837,6 @@ static bool filter(struct dma_chan *chan, void *slave)
return true;
}
-#ifdef CONFIG_OF
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
@@ -757,13 +879,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
}
return 0;
}
-#else
-static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
- struct device_node *np)
-{
- return -ENOSYS;
-}
-#endif
/*
* fsmc_nand_probe - Probe function
@@ -782,19 +897,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
u32 pid;
int i;
- if (np) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- pdev->dev.platform_data = pdata;
- ret = fsmc_nand_probe_config_dt(pdev, np);
- if (ret) {
- dev_err(&pdev->dev, "no platform data\n");
- return -ENODEV;
- }
- }
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
- if (!pdata) {
- dev_err(&pdev->dev, "platform data is NULL\n");
- return -EINVAL;
+ pdev->dev.platform_data = pdata;
+ ret = fsmc_nand_probe_config_dt(pdev, np);
+ if (ret) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
}
/* Allocate memory for the device structure (and zero it) */
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 53bafe2..a0669a3 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -797,22 +797,17 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
struct resource *rc;
int res;
- rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (rc == NULL) {
- dev_err(&pdev->dev, "No memory resource found for device\n");
- return -EBUSY;
- }
-
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
if (!host)
return -ENOMEM;
- host->io_base_dma = rc->start;
+ rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->io_base = devm_ioremap_resource(&pdev->dev, rc);
if (IS_ERR(host->io_base))
return PTR_ERR(host->io_base);
+ host->io_base_dma = rc->start;
if (pdev->dev.of_node)
host->ncfg = lpc32xx_parse_dt(&pdev->dev);
if (!host->ncfg) {
diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
index 6c3eed3..6c517c6 100644
--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -1383,7 +1383,6 @@ static int mtk_nfc_probe(struct platform_device *pdev)
nfc->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(nfc->regs)) {
ret = PTR_ERR(nfc->regs);
- dev_err(dev, "no nfi base\n");
goto release_ecc;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec1c28a..1492c12 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3263,6 +3263,42 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
}
/**
+ * nand_max_bad_blocks - [MTD Interface] Max number of bad blocks for an mtd
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ * @len: length of mtd
+ */
+static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ u32 part_start_block;
+ u32 part_end_block;
+ u32 part_start_die;
+ u32 part_end_die;
+
+ /*
+ * max_bb_per_die and blocks_per_die used to determine
+ * the maximum bad block count.
+ */
+ if (!chip->max_bb_per_die || !chip->blocks_per_die)
+ return -ENOTSUPP;
+
+ /* Get the start and end of the partition in erase blocks. */
+ part_start_block = mtd_div_by_eb(ofs, mtd);
+ part_end_block = mtd_div_by_eb(len, mtd) + part_start_block - 1;
+
+ /* Get the start and end LUNs of the partition. */
+ part_start_die = part_start_block / chip->blocks_per_die;
+ part_end_die = part_end_block / chip->blocks_per_die;
+
+ /*
+ * Look up the bad blocks per unit and multiply by the number of units
+ * that the partition spans.
+ */
+ return chip->max_bb_per_die * (part_end_die - part_start_die + 1);
+}
+
+/**
* nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
* @mtd: MTD device structure
* @chip: nand chip info structure
@@ -3592,6 +3628,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
chip->bits_per_cell = p->bits_per_cell;
+ chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
+ chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+
if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
*busw = NAND_BUSWIDTH_16;
else
@@ -4815,6 +4854,7 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->_block_isreserved = nand_block_isreserved;
mtd->_block_isbad = nand_block_isbad;
mtd->_block_markbad = nand_block_markbad;
+ mtd->_max_bad_blocks = nand_max_bad_blocks;
mtd->writebufsize = mtd->writesize;
/*
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index b3a332f..4a2f75b 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -185,6 +185,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_SANDISK, "SanDisk"},
{NAND_MFR_INTEL, "Intel"},
{NAND_MFR_ATO, "ATO"},
+ {NAND_MFR_WINBOND, "Winbond"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index e40482a..0eeeb8b 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -321,6 +321,10 @@ static int sunxi_nfc_wait_events(struct sunxi_nfc *nfc, u32 events,
ret = wait_for_completion_timeout(&nfc->complete,
msecs_to_jiffies(timeout_ms));
+ if (!ret)
+ ret = -ETIMEDOUT;
+ else
+ ret = 0;
writel(0, nfc->regs + NFC_REG_INT);
} else {
@@ -518,6 +522,8 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
u32 tmp;
while (len > offs) {
+ bool poll = false;
+
cnt = min(len - offs, NFC_SRAM_SIZE);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -528,7 +534,11 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ /* Arbitrary limit for polling mode */
+ if (cnt < 64)
+ poll = true;
+
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
if (ret)
break;
@@ -551,6 +561,8 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
u32 tmp;
while (len > offs) {
+ bool poll = false;
+
cnt = min(len - offs, NFC_SRAM_SIZE);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -563,7 +575,11 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
NFC_ACCESS_DIR;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ /* Arbitrary limit for polling mode */
+ if (cnt < 64)
+ poll = true;
+
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
if (ret)
break;
@@ -588,10 +604,6 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
int ret;
- ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
- if (ret)
- return;
-
if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) &&
!(ctrl & (NAND_CLE | NAND_ALE))) {
u32 cmd = 0;
@@ -621,6 +633,10 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
writel(sunxi_nand->addr[1],
nfc->regs + NFC_REG_ADDR_HIGH);
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return;
+
writel(cmd, nfc->regs + NFC_REG_CMD);
sunxi_nand->addr[0] = 0;
sunxi_nand->addr[1] = 0;
@@ -957,7 +973,7 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -1069,7 +1085,7 @@ static int sunxi_nfc_hw_ecc_read_chunks_dma(struct mtd_info *mtd, uint8_t *buf,
writel(NFC_PAGE_OP | NFC_DATA_SWAP_METHOD | NFC_DATA_TRANS,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
if (ret)
dmaengine_terminate_all(nfc->dmac);
@@ -1189,7 +1205,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
NFC_ACCESS_DIR | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -1428,7 +1444,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
NFC_DATA_TRANS | NFC_ACCESS_DIR,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
if (ret)
dmaengine_terminate_all(nfc->dmac);
diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
index 895101a..ddee400 100644
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -3,7 +3,7 @@
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
- * Copyright © 2012 John Crispin <blogic@openwrt.org>
+ * Copyright © 2012 John Crispin <john@phrozen.org>
* Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de>
*/
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index ede407d..4644701 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -108,6 +108,7 @@ static int parse_ofpart_partitions(struct mtd_info *master,
parts[i].offset = of_read_number(reg, a_cells);
parts[i].size = of_read_number(reg + a_cells, s_cells);
+ parts[i].of_node = pp;
partname = of_get_property(pp, "label", &len);
if (!partname)
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 4a682ee..7252087 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -29,6 +29,16 @@ config MTD_SPI_NOR_USE_4K_SECTORS
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+config SPI_ASPEED_SMC
+ tristate "Aspeed flash controllers in SPI mode"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ help
+ This enables support for the Firmware Memory controller (FMC)
+ in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
+ and support for the SPI flash memory controller (SPI) for
+ the host firmware. The implementation only supports SPI NOR.
+
config SPI_ATMEL_QUADSPI
tristate "Atmel Quad SPI Controller"
depends on ARCH_AT91 || (ARM && COMPILE_TEST)
@@ -40,7 +50,7 @@ config SPI_ATMEL_QUADSPI
config SPI_CADENCE_QUADSPI
tristate "Cadence Quad SPI controller"
- depends on OF && ARM
+ depends on OF && (ARM || COMPILE_TEST)
help
Enable support for the Cadence Quad SPI Flash controller.
@@ -76,4 +86,24 @@ config SPI_NXP_SPIFI
Flash. Enable this option if you have a device with a SPIFI
controller and want to access the Flash as a mtd device.
+config SPI_INTEL_SPI
+ tristate
+
+config SPI_INTEL_SPI_PLATFORM
+ tristate "Intel PCH/PCU SPI flash platform driver" if EXPERT
+ depends on X86
+ select SPI_INTEL_SPI
+ help
+ This enables platform support for the Intel PCH/PCU SPI
+ controller in master mode. This controller is present in modern
+ Intel hardware and is used to hold BIOS and other persistent
+ settings. Using this driver it is possible to upgrade BIOS
+ directly from Linux.
+
+ Say N here unless you know what you are doing. Overwriting the
+ SPI flash may render the system unbootable.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel-spi-platform.
+
endif # MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 121695e..72238a7 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,7 +1,10 @@
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o
obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o
obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o
obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
obj-$(CONFIG_MTD_MT81xx_NOR) += mtk-quadspi.o
obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
+obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
+obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o
diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
new file mode 100644
index 0000000..56051d3
--- /dev/null
+++ b/drivers/mtd/spi-nor/aspeed-smc.c
@@ -0,0 +1,754 @@
+/*
+ * ASPEED Static Memory Controller driver
+ *
+ * Copyright (c) 2015-2016, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/sysfs.h>
+
+#define DEVICE_NAME "aspeed-smc"
+
+/*
+ * The driver only support SPI flash
+ */
+enum aspeed_smc_flash_type {
+ smc_type_nor = 0,
+ smc_type_nand = 1,
+ smc_type_spi = 2,
+};
+
+struct aspeed_smc_chip;
+
+struct aspeed_smc_info {
+ u32 maxsize; /* maximum size of chip window */
+ u8 nce; /* number of chip enables */
+ bool hastype; /* flash type field exists in config reg */
+ u8 we0; /* shift for write enable bit for CE0 */
+ u8 ctl0; /* offset in regs of ctl for CE0 */
+
+ void (*set_4b)(struct aspeed_smc_chip *chip);
+};
+
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip);
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip);
+
+static const struct aspeed_smc_info fmc_2400_info = {
+ .maxsize = 64 * 1024 * 1024,
+ .nce = 5,
+ .hastype = true,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2400_info = {
+ .maxsize = 64 * 1024 * 1024,
+ .nce = 1,
+ .hastype = false,
+ .we0 = 0,
+ .ctl0 = 0x04,
+ .set_4b = aspeed_smc_chip_set_4b_spi_2400,
+};
+
+static const struct aspeed_smc_info fmc_2500_info = {
+ .maxsize = 256 * 1024 * 1024,
+ .nce = 3,
+ .hastype = true,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2500_info = {
+ .maxsize = 128 * 1024 * 1024,
+ .nce = 2,
+ .hastype = false,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+enum aspeed_smc_ctl_reg_value {
+ smc_base, /* base value without mode for other commands */
+ smc_read, /* command reg for (maybe fast) reads */
+ smc_write, /* command reg for writes */
+ smc_max,
+};
+
+struct aspeed_smc_controller;
+
+struct aspeed_smc_chip {
+ int cs;
+ struct aspeed_smc_controller *controller;
+ void __iomem *ctl; /* control register */
+ void __iomem *ahb_base; /* base of chip window */
+ u32 ctl_val[smc_max]; /* control settings */
+ enum aspeed_smc_flash_type type; /* what type of flash */
+ struct spi_nor nor;
+};
+
+struct aspeed_smc_controller {
+ struct device *dev;
+
+ struct mutex mutex; /* controller access mutex */
+ const struct aspeed_smc_info *info; /* type info of controller */
+ void __iomem *regs; /* controller registers */
+ void __iomem *ahb_base; /* per-chip windows resource */
+
+ struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */
+};
+
+/*
+ * SPI Flash Configuration Register (AST2500 SPI)
+ * or
+ * Type setting Register (AST2500 FMC).
+ * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the
+ * driver does not support it.
+ */
+#define CONFIG_REG 0x0
+#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */
+
+#define CONFIG_CE2_WRITE BIT(18)
+#define CONFIG_CE1_WRITE BIT(17)
+#define CONFIG_CE0_WRITE BIT(16)
+
+#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */
+#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */
+#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */
+
+/*
+ * CE Control Register
+ */
+#define CE_CONTROL_REG 0x4
+
+/*
+ * CEx Control Register
+ */
+#define CONTROL_AAF_MODE BIT(31)
+#define CONTROL_IO_MODE_MASK GENMASK(30, 28)
+#define CONTROL_IO_DUAL_DATA BIT(29)
+#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28))
+#define CONTROL_IO_QUAD_DATA BIT(30)
+#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28))
+#define CONTROL_CE_INACTIVE_SHIFT 24
+#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \
+ CONTROL_CE_INACTIVE_SHIFT)
+/* 0 = 16T ... 15 = 1T T=HCLK */
+#define CONTROL_COMMAND_SHIFT 16
+#define CONTROL_DUMMY_COMMAND_OUT BIT(15)
+#define CONTROL_IO_DUMMY_HI BIT(14)
+#define CONTROL_IO_DUMMY_HI_SHIFT 14
+#define CONTROL_CLK_DIV4 BIT(13) /* others */
+#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */
+#define CONTROL_RW_MERGE BIT(12)
+#define CONTROL_IO_DUMMY_LO_SHIFT 6
+#define CONTROL_IO_DUMMY_LO GENMASK(7, \
+ CONTROL_IO_DUMMY_LO_SHIFT)
+#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \
+ CONTROL_IO_DUMMY_LO)
+#define CONTROL_IO_DUMMY_SET(dummy) \
+ (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \
+ (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT))
+
+#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8
+#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \
+ CONTROL_CLOCK_FREQ_SEL_SHIFT)
+#define CONTROL_LSB_FIRST BIT(5)
+#define CONTROL_CLOCK_MODE_3 BIT(4)
+#define CONTROL_IN_DUAL_DATA BIT(3)
+#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2)
+#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0)
+#define CONTROL_COMMAND_MODE_NORMAL 0
+#define CONTROL_COMMAND_MODE_FREAD 1
+#define CONTROL_COMMAND_MODE_WRITE 2
+#define CONTROL_COMMAND_MODE_USER 3
+
+#define CONTROL_KEEP_MASK \
+ (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
+ CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \
+ CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
+
+/*
+ * The Segment Register uses a 8MB unit to encode the start address
+ * and the end address of the mapping window of a flash SPI slave :
+ *
+ * | byte 1 | byte 2 | byte 3 | byte 4 |
+ * +--------+--------+--------+--------+
+ * | end | start | 0 | 0 |
+ */
+#define SEGMENT_ADDR_REG0 0x30
+#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23)
+#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23)
+
+/*
+ * In user mode all data bytes read or written to the chip decode address
+ * range are transferred to or from the SPI bus. The range is treated as a
+ * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned
+ * to its size. The address within the multiple 8kB range is ignored when
+ * sending bytes to the SPI bus.
+ *
+ * On the arm architecture, as of Linux version 4.3, memcpy_fromio and
+ * memcpy_toio on little endian targets use the optimized memcpy routines
+ * that were designed for well behavied memory storage. These routines
+ * have a stutter if the source and destination are not both word aligned,
+ * once with a duplicate access to the source after aligning to the
+ * destination to a word boundary, and again with a duplicate access to
+ * the source when the final byte count is not word aligned.
+ *
+ * When writing or reading the fifo this stutter discards data or sends
+ * too much data to the fifo and can not be used by this driver.
+ *
+ * While the low level io string routines that implement the insl family do
+ * the desired accesses and memory increments, the cross architecture io
+ * macros make them essentially impossible to use on a memory mapped address
+ * instead of a a token from the call to iomap of an io port.
+ *
+ * These fifo routines use readl and friends to a constant io port and update
+ * the memory buffer pointer and count via explicit code. The final updates
+ * to len are optimistically suppressed.
+ */
+static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len)
+{
+ size_t offset = 0;
+
+ if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) &&
+ IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+ ioread32_rep(src, buf, len >> 2);
+ offset = len & ~0x3;
+ len -= offset;
+ }
+ ioread8_rep(src, (u8 *)buf + offset, len);
+ return 0;
+}
+
+static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf,
+ size_t len)
+{
+ size_t offset = 0;
+
+ if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) &&
+ IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+ iowrite32_rep(dst, buf, len >> 2);
+ offset = len & ~0x3;
+ len -= offset;
+ }
+ iowrite8_rep(dst, (const u8 *)buf + offset, len);
+ return 0;
+}
+
+static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip)
+{
+ return BIT(chip->controller->info->we0 + chip->cs);
+}
+
+static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ reg = readl(controller->regs + CONFIG_REG);
+
+ if (reg & aspeed_smc_chip_write_bit(chip))
+ return;
+
+ dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n",
+ controller->regs + CONFIG_REG, reg);
+ reg |= aspeed_smc_chip_write_bit(chip);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_start_user(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ u32 ctl = chip->ctl_val[smc_base];
+
+ /*
+ * When the chip is controlled in user mode, we need write
+ * access to send the opcodes to it. So check the config.
+ */
+ aspeed_smc_chip_check_config(chip);
+
+ ctl |= CONTROL_COMMAND_MODE_USER |
+ CONTROL_CE_STOP_ACTIVE_CONTROL;
+ writel(ctl, chip->ctl);
+
+ ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL;
+ writel(ctl, chip->ctl);
+}
+
+static void aspeed_smc_stop_user(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ u32 ctl = chip->ctl_val[smc_read];
+ u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER |
+ CONTROL_CE_STOP_ACTIVE_CONTROL;
+
+ writel(ctl2, chip->ctl); /* stop user CE control */
+ writel(ctl, chip->ctl); /* default to fread or read mode */
+}
+
+static int aspeed_smc_prep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ mutex_lock(&chip->controller->mutex);
+ return 0;
+}
+
+static void aspeed_smc_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ mutex_unlock(&chip->controller->mutex);
+}
+
+static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+ aspeed_smc_read_from_ahb(buf, chip->ahb_base, len);
+ aspeed_smc_stop_user(nor);
+ return 0;
+}
+
+static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ int len)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+ aspeed_smc_write_to_ahb(chip->ahb_base, buf, len);
+ aspeed_smc_stop_user(nor);
+ return 0;
+}
+
+static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ __be32 temp;
+ u32 cmdaddr;
+
+ switch (nor->addr_width) {
+ default:
+ WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n",
+ nor->addr_width);
+ /* FALLTHROUGH */
+ case 3:
+ cmdaddr = addr & 0xFFFFFF;
+ cmdaddr |= cmd << 24;
+
+ temp = cpu_to_be32(cmdaddr);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+ break;
+ case 4:
+ temp = cpu_to_be32(addr);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+ break;
+ }
+}
+
+static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from,
+ size_t len, u_char *read_buf)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ int i;
+ u8 dummy = 0xFF;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from);
+ for (i = 0; i < chip->nor.read_dummy / 8; i++)
+ aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy));
+
+ aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len);
+ aspeed_smc_stop_user(nor);
+ return len;
+}
+
+static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to,
+ size_t len, const u_char *write_buf)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to);
+ aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len);
+ aspeed_smc_stop_user(nor);
+ return len;
+}
+
+static int aspeed_smc_unregister(struct aspeed_smc_controller *controller)
+{
+ struct aspeed_smc_chip *chip;
+ int n;
+
+ for (n = 0; n < controller->info->nce; n++) {
+ chip = controller->chips[n];
+ if (chip)
+ mtd_device_unregister(&chip->nor.mtd);
+ }
+
+ return 0;
+}
+
+static int aspeed_smc_remove(struct platform_device *dev)
+{
+ return aspeed_smc_unregister(platform_get_drvdata(dev));
+}
+
+static const struct of_device_id aspeed_smc_matches[] = {
+ { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info },
+ { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info },
+ { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info },
+ { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_smc_matches);
+
+/*
+ * Each chip has a mapping window defined by a segment address
+ * register defining a start and an end address on the AHB bus. These
+ * addresses can be configured to fit the chip size and offer a
+ * contiguous memory region across chips. For the moment, we only
+ * check that each chip segment is valid.
+ */
+static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
+ struct resource *res)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 offset = 0;
+ u32 reg;
+
+ if (controller->info->nce > 1) {
+ reg = readl(controller->regs + SEGMENT_ADDR_REG0 +
+ chip->cs * 4);
+
+ if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
+ return NULL;
+
+ offset = SEGMENT_ADDR_START(reg) - res->start;
+ }
+
+ return controller->ahb_base + offset;
+}
+
+static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ reg = readl(controller->regs + CONFIG_REG);
+
+ reg |= aspeed_smc_chip_write_bit(chip);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ chip->type = type;
+
+ reg = readl(controller->regs + CONFIG_REG);
+ reg &= ~(3 << (chip->cs * 2));
+ reg |= chip->type << (chip->cs * 2);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+/*
+ * The AST2500 FMC flash controller should be strapped by hardware, or
+ * autodetected, but the AST2500 SPI flash needs to be set.
+ */
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ if (chip->controller->info == &spi_2500_info) {
+ reg = readl(controller->regs + CE_CONTROL_REG);
+ reg |= 1 << chip->cs;
+ writel(reg, controller->regs + CE_CONTROL_REG);
+ }
+}
+
+/*
+ * The AST2400 SPI flash controller does not have a CE Control
+ * register. It uses the CE0 control register to set 4Byte mode at the
+ * controller level.
+ */
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip)
+{
+ chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B;
+ chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B;
+}
+
+static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
+ struct resource *res)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ const struct aspeed_smc_info *info = controller->info;
+ u32 reg, base_reg;
+
+ /*
+ * Always turn on the write enable bit to allow opcodes to be
+ * sent in user mode.
+ */
+ aspeed_smc_chip_enable_write(chip);
+
+ /* The driver only supports SPI type flash */
+ if (info->hastype)
+ aspeed_smc_chip_set_type(chip, smc_type_spi);
+
+ /*
+ * Configure chip base address in memory
+ */
+ chip->ahb_base = aspeed_smc_chip_base(chip, res);
+ if (!chip->ahb_base) {
+ dev_warn(chip->nor.dev, "CE segment window closed.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get value of the inherited control register. U-Boot usually
+ * does some timing calibration on the FMC chip, so it's good
+ * to keep them. In the future, we should handle calibration
+ * from Linux.
+ */
+ reg = readl(chip->ctl);
+ dev_dbg(controller->dev, "control register: %08x\n", reg);
+
+ base_reg = reg & CONTROL_KEEP_MASK;
+ if (base_reg != reg) {
+ dev_dbg(controller->dev,
+ "control register changed to: %08x\n",
+ base_reg);
+ }
+ chip->ctl_val[smc_base] = base_reg;
+
+ /*
+ * Retain the prior value of the control register as the
+ * default if it was normal access mode. Otherwise start with
+ * the sanitized base value set to read mode.
+ */
+ if ((reg & CONTROL_COMMAND_MODE_MASK) ==
+ CONTROL_COMMAND_MODE_NORMAL)
+ chip->ctl_val[smc_read] = reg;
+ else
+ chip->ctl_val[smc_read] = chip->ctl_val[smc_base] |
+ CONTROL_COMMAND_MODE_NORMAL;
+
+ dev_dbg(controller->dev, "default control register: %08x\n",
+ chip->ctl_val[smc_read]);
+ return 0;
+}
+
+static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ const struct aspeed_smc_info *info = controller->info;
+ u32 cmd;
+
+ if (chip->nor.addr_width == 4 && info->set_4b)
+ info->set_4b(chip);
+
+ /*
+ * base mode has not been optimized yet. use it for writes.
+ */
+ chip->ctl_val[smc_write] = chip->ctl_val[smc_base] |
+ chip->nor.program_opcode << CONTROL_COMMAND_SHIFT |
+ CONTROL_COMMAND_MODE_WRITE;
+
+ dev_dbg(controller->dev, "write control register: %08x\n",
+ chip->ctl_val[smc_write]);
+
+ /*
+ * TODO: Adjust clocks if fast read is supported and interpret
+ * SPI-NOR flags to adjust controller settings.
+ */
+ switch (chip->nor.flash_read) {
+ case SPI_NOR_NORMAL:
+ cmd = CONTROL_COMMAND_MODE_NORMAL;
+ break;
+ case SPI_NOR_FAST:
+ cmd = CONTROL_COMMAND_MODE_FREAD;
+ break;
+ default:
+ dev_err(chip->nor.dev, "unsupported SPI read mode\n");
+ return -EINVAL;
+ }
+
+ chip->ctl_val[smc_read] |= cmd |
+ CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8);
+
+ dev_dbg(controller->dev, "base control register: %08x\n",
+ chip->ctl_val[smc_read]);
+ return 0;
+}
+
+static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
+ struct device_node *np, struct resource *r)
+{
+ const struct aspeed_smc_info *info = controller->info;
+ struct device *dev = controller->dev;
+ struct device_node *child;
+ unsigned int cs;
+ int ret = -ENODEV;
+
+ for_each_available_child_of_node(np, child) {
+ struct aspeed_smc_chip *chip;
+ struct spi_nor *nor;
+ struct mtd_info *mtd;
+
+ /* This driver does not support NAND or NOR flash devices. */
+ if (!of_device_is_compatible(child, "jedec,spi-nor"))
+ continue;
+
+ ret = of_property_read_u32(child, "reg", &cs);
+ if (ret) {
+ dev_err(dev, "Couldn't not read chip select.\n");
+ break;
+ }
+
+ if (cs >= info->nce) {
+ dev_err(dev, "Chip select %d out of range.\n",
+ cs);
+ ret = -ERANGE;
+ break;
+ }
+
+ if (controller->chips[cs]) {
+ dev_err(dev, "Chip select %d already in use by %s\n",
+ cs, dev_name(controller->chips[cs]->nor.dev));
+ ret = -EBUSY;
+ break;
+ }
+
+ chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ chip->controller = controller;
+ chip->ctl = controller->regs + info->ctl0 + cs * 4;
+ chip->cs = cs;
+
+ nor = &chip->nor;
+ mtd = &nor->mtd;
+
+ nor->dev = dev;
+ nor->priv = chip;
+ spi_nor_set_flash_node(nor, child);
+ nor->read = aspeed_smc_read_user;
+ nor->write = aspeed_smc_write_user;
+ nor->read_reg = aspeed_smc_read_reg;
+ nor->write_reg = aspeed_smc_write_reg;
+ nor->prepare = aspeed_smc_prep;
+ nor->unprepare = aspeed_smc_unprep;
+
+ ret = aspeed_smc_chip_setup_init(chip, r);
+ if (ret)
+ break;
+
+ /*
+ * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL
+ * attach when board support is present as determined
+ * by of property.
+ */
+ ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL);
+ if (ret)
+ break;
+
+ ret = aspeed_smc_chip_setup_finish(chip);
+ if (ret)
+ break;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ break;
+
+ controller->chips[cs] = chip;
+ }
+
+ if (ret)
+ aspeed_smc_unregister(controller);
+
+ return ret;
+}
+
+static int aspeed_smc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct aspeed_smc_controller *controller;
+ const struct of_device_id *match;
+ const struct aspeed_smc_info *info;
+ struct resource *res;
+ int ret;
+
+ match = of_match_device(aspeed_smc_matches, &pdev->dev);
+ if (!match || !match->data)
+ return -ENODEV;
+ info = match->data;
+
+ controller = devm_kzalloc(&pdev->dev, sizeof(*controller) +
+ info->nce * sizeof(controller->chips[0]), GFP_KERNEL);
+ if (!controller)
+ return -ENOMEM;
+ controller->info = info;
+ controller->dev = dev;
+
+ mutex_init(&controller->mutex);
+ platform_set_drvdata(pdev, controller);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ controller->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(controller->regs))
+ return PTR_ERR(controller->regs);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ controller->ahb_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(controller->ahb_base))
+ return PTR_ERR(controller->ahb_base);
+
+ ret = aspeed_smc_setup_flash(controller, np, res);
+ if (ret)
+ dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
+
+ return ret;
+}
+
+static struct platform_driver aspeed_smc_driver = {
+ .probe = aspeed_smc_probe,
+ .remove = aspeed_smc_remove,
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_smc_matches,
+ }
+};
+
+module_platform_driver(aspeed_smc_driver);
+
+MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver");
+MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index d489fbd..9f8102d 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -526,7 +526,8 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor,
bytes_to_read *= cqspi->fifo_width;
bytes_to_read = bytes_to_read > remaining ?
remaining : bytes_to_read;
- readsl(ahb_base, rxbuf, DIV_ROUND_UP(bytes_to_read, 4));
+ ioread32_rep(ahb_base, rxbuf,
+ DIV_ROUND_UP(bytes_to_read, 4));
rxbuf += bytes_to_read;
remaining -= bytes_to_read;
bytes_to_read = cqspi_get_rd_sram_level(cqspi);
@@ -610,7 +611,8 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor,
while (remaining > 0) {
write_bytes = remaining > page_size ? page_size : remaining;
- writesl(cqspi->ahb_base, txbuf, DIV_ROUND_UP(write_bytes, 4));
+ iowrite32_rep(cqspi->ahb_base, txbuf,
+ DIV_ROUND_UP(write_bytes, 4));
ret = wait_for_completion_timeout(&cqspi->transfer_complete,
msecs_to_jiffies
@@ -891,7 +893,7 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
if (ret)
return ret;
- return (ret < 0) ? ret : len;
+ return len;
}
static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
@@ -911,7 +913,7 @@ static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
if (ret)
return ret;
- return (ret < 0) ? ret : len;
+ return len;
}
static int cqspi_erase(struct spi_nor *nor, loff_t offs)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index b4d8953..1476135 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -193,7 +193,7 @@
#define QUADSPI_LUT_NUM 64
/* SEQID -- we can have 16 seqids at most. */
-#define SEQID_QUAD_READ 0
+#define SEQID_READ 0
#define SEQID_WREN 1
#define SEQID_WRDI 2
#define SEQID_RDSR 3
@@ -373,32 +373,26 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
void __iomem *base = q->iobase;
int rxfifo = q->devtype_data->rxfifo;
u32 lut_base;
- u8 cmd, addrlen, dummy;
int i;
+ struct spi_nor *nor = &q->nor[0];
+ u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+ u8 read_op = nor->read_opcode;
+ u8 read_dm = nor->read_dummy;
+
fsl_qspi_unlock_lut(q);
/* Clear all the LUT table */
for (i = 0; i < QUADSPI_LUT_NUM; i++)
qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
- /* Quad Read */
- lut_base = SEQID_QUAD_READ * 4;
-
- if (q->nor_size <= SZ_16M) {
- cmd = SPINOR_OP_READ_1_1_4;
- addrlen = ADDR24BIT;
- dummy = 8;
- } else {
- /* use the 4-byte address */
- cmd = SPINOR_OP_READ_1_1_4;
- addrlen = ADDR32BIT;
- dummy = 8;
- }
+ /* Read */
+ lut_base = SEQID_READ * 4;
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
- qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+ LUT1(FSL_READ, PAD4, rxfifo),
base + QUADSPI_LUT(lut_base + 1));
/* Write enable */
@@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
/* Page Program */
lut_base = SEQID_PP * 4;
- if (q->nor_size <= SZ_16M) {
- cmd = SPINOR_OP_PP;
- addrlen = ADDR24BIT;
- } else {
- /* use the 4-byte address */
- cmd = SPINOR_OP_PP;
- addrlen = ADDR32BIT;
- }
-
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
+ LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
base + QUADSPI_LUT(lut_base + 1));
@@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
/* Erase a sector */
lut_base = SEQID_SE * 4;
- cmd = q->nor[0].erase_opcode;
- addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
-
- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+ qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
+ LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
/* Erase the whole chip */
@@ -484,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
case SPINOR_OP_READ_1_1_4:
- return SEQID_QUAD_READ;
+ return SEQID_READ;
case SPINOR_OP_WREN:
return SEQID_WREN;
case SPINOR_OP_WRDI:
diff --git a/drivers/mtd/spi-nor/intel-spi-platform.c b/drivers/mtd/spi-nor/intel-spi-platform.c
new file mode 100644
index 0000000..5c943df
--- /dev/null
+++ b/drivers/mtd/spi-nor/intel-spi-platform.c
@@ -0,0 +1,57 @@
+/*
+ * Intel PCH/PCU SPI flash platform driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "intel-spi.h"
+
+static int intel_spi_platform_probe(struct platform_device *pdev)
+{
+ struct intel_spi_boardinfo *info;
+ struct intel_spi *ispi;
+ struct resource *mem;
+
+ info = dev_get_platdata(&pdev->dev);
+ if (!info)
+ return -EINVAL;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ispi = intel_spi_probe(&pdev->dev, mem, info);
+ if (IS_ERR(ispi))
+ return PTR_ERR(ispi);
+
+ platform_set_drvdata(pdev, ispi);
+ return 0;
+}
+
+static int intel_spi_platform_remove(struct platform_device *pdev)
+{
+ struct intel_spi *ispi = platform_get_drvdata(pdev);
+
+ return intel_spi_remove(ispi);
+}
+
+static struct platform_driver intel_spi_platform_driver = {
+ .probe = intel_spi_platform_probe,
+ .remove = intel_spi_platform_remove,
+ .driver = {
+ .name = "intel-spi",
+ },
+};
+
+module_platform_driver(intel_spi_platform_driver);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:intel-spi");
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
new file mode 100644
index 0000000..a10f602
--- /dev/null
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -0,0 +1,777 @@
+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/platform_data/intel-spi.h>
+
+#include "intel-spi.h"
+
+/* Offsets are from @ispi->base */
+#define BFPREG 0x00
+
+#define HSFSTS_CTL 0x04
+#define HSFSTS_CTL_FSMIE BIT(31)
+#define HSFSTS_CTL_FDBC_SHIFT 24
+#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT)
+
+#define HSFSTS_CTL_FCYCLE_SHIFT 17
+#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT)
+/* HW sequencer opcodes */
+#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT)
+
+#define HSFSTS_CTL_FGO BIT(16)
+#define HSFSTS_CTL_FLOCKDN BIT(15)
+#define HSFSTS_CTL_FDV BIT(14)
+#define HSFSTS_CTL_SCIP BIT(5)
+#define HSFSTS_CTL_AEL BIT(2)
+#define HSFSTS_CTL_FCERR BIT(1)
+#define HSFSTS_CTL_FDONE BIT(0)
+
+#define FADDR 0x08
+#define DLOCK 0x0c
+#define FDATA(n) (0x10 + ((n) * 4))
+
+#define FRACC 0x50
+
+#define FREG(n) (0x54 + ((n) * 4))
+#define FREG_BASE_MASK 0x3fff
+#define FREG_LIMIT_SHIFT 16
+#define FREG_LIMIT_MASK (0x03fff << FREG_LIMIT_SHIFT)
+
+/* Offset is from @ispi->pregs */
+#define PR(n) ((n) * 4)
+#define PR_WPE BIT(31)
+#define PR_LIMIT_SHIFT 16
+#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT)
+#define PR_RPE BIT(15)
+#define PR_BASE_MASK 0x3fff
+/* Last PR is GPR0 */
+#define PR_NUM (5 + 1)
+
+/* Offsets are from @ispi->sregs */
+#define SSFSTS_CTL 0x00
+#define SSFSTS_CTL_FSMIE BIT(23)
+#define SSFSTS_CTL_DS BIT(22)
+#define SSFSTS_CTL_DBC_SHIFT 16
+#define SSFSTS_CTL_SPOP BIT(11)
+#define SSFSTS_CTL_ACS BIT(10)
+#define SSFSTS_CTL_SCGO BIT(9)
+#define SSFSTS_CTL_COP_SHIFT 12
+#define SSFSTS_CTL_FRS BIT(7)
+#define SSFSTS_CTL_DOFRS BIT(6)
+#define SSFSTS_CTL_AEL BIT(4)
+#define SSFSTS_CTL_FCERR BIT(3)
+#define SSFSTS_CTL_FDONE BIT(2)
+#define SSFSTS_CTL_SCIP BIT(0)
+
+#define PREOP_OPTYPE 0x04
+#define OPMENU0 0x08
+#define OPMENU1 0x0c
+
+/* CPU specifics */
+#define BYT_PR 0x74
+#define BYT_SSFSTS_CTL 0x90
+#define BYT_BCR 0xfc
+#define BYT_BCR_WPD BIT(0)
+#define BYT_FREG_NUM 5
+
+#define LPT_PR 0x74
+#define LPT_SSFSTS_CTL 0x90
+#define LPT_FREG_NUM 5
+
+#define BXT_PR 0x84
+#define BXT_SSFSTS_CTL 0xa0
+#define BXT_FREG_NUM 12
+
+#define INTEL_SPI_TIMEOUT 5000 /* ms */
+#define INTEL_SPI_FIFO_SZ 64
+
+/**
+ * struct intel_spi - Driver private data
+ * @dev: Device pointer
+ * @info: Pointer to board specific info
+ * @nor: SPI NOR layer structure
+ * @base: Beginning of MMIO space
+ * @pregs: Start of protection registers
+ * @sregs: Start of software sequencer registers
+ * @nregions: Maximum number of regions
+ * @writeable: Is the chip writeable
+ * @swseq: Use SW sequencer in register reads/writes
+ * @erase_64k: 64k erase supported
+ * @opcodes: Opcodes which are supported. This are programmed by BIOS
+ * before it locks down the controller.
+ * @preopcodes: Preopcodes which are supported.
+ */
+struct intel_spi {
+ struct device *dev;
+ const struct intel_spi_boardinfo *info;
+ struct spi_nor nor;
+ void __iomem *base;
+ void __iomem *pregs;
+ void __iomem *sregs;
+ size_t nregions;
+ bool writeable;
+ bool swseq;
+ bool erase_64k;
+ u8 opcodes[8];
+ u8 preopcodes[2];
+};
+
+static bool writeable;
+module_param(writeable, bool, 0);
+MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)");
+
+static void intel_spi_dump_regs(struct intel_spi *ispi)
+{
+ u32 value;
+ int i;
+
+ dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG));
+
+ value = readl(ispi->base + HSFSTS_CTL);
+ dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value);
+ if (value & HSFSTS_CTL_FLOCKDN)
+ dev_dbg(ispi->dev, "-> Locked\n");
+
+ dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR));
+ dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK));
+
+ for (i = 0; i < 16; i++)
+ dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n",
+ i, readl(ispi->base + FDATA(i)));
+
+ dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC));
+
+ for (i = 0; i < ispi->nregions; i++)
+ dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
+ readl(ispi->base + FREG(i)));
+ for (i = 0; i < PR_NUM; i++)
+ dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
+ readl(ispi->pregs + PR(i)));
+
+ value = readl(ispi->sregs + SSFSTS_CTL);
+ dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
+ dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
+ readl(ispi->sregs + PREOP_OPTYPE));
+ dev_dbg(ispi->dev, "OPMENU0=0x%08x\n", readl(ispi->sregs + OPMENU0));
+ dev_dbg(ispi->dev, "OPMENU1=0x%08x\n", readl(ispi->sregs + OPMENU1));
+
+ if (ispi->info->type == INTEL_SPI_BYT)
+ dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
+
+ dev_dbg(ispi->dev, "Protected regions:\n");
+ for (i = 0; i < PR_NUM; i++) {
+ u32 base, limit;
+
+ value = readl(ispi->pregs + PR(i));
+ if (!(value & (PR_WPE | PR_RPE)))
+ continue;
+
+ limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
+ base = value & PR_BASE_MASK;
+
+ dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n",
+ i, base << 12, (limit << 12) | 0xfff,
+ value & PR_WPE ? 'W' : '.',
+ value & PR_RPE ? 'R' : '.');
+ }
+
+ dev_dbg(ispi->dev, "Flash regions:\n");
+ for (i = 0; i < ispi->nregions; i++) {
+ u32 region, base, limit;
+
+ region = readl(ispi->base + FREG(i));
+ base = region & FREG_BASE_MASK;
+ limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
+
+ if (base >= limit || (i > 0 && limit == 0))
+ dev_dbg(ispi->dev, " %02d disabled\n", i);
+ else
+ dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n",
+ i, base << 12, (limit << 12) | 0xfff);
+ }
+
+ dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
+ ispi->swseq ? 'S' : 'H');
+}
+
+/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
+static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
+{
+ size_t bytes;
+ int i = 0;
+
+ if (size > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ while (size > 0) {
+ bytes = min_t(size_t, size, 4);
+ memcpy_fromio(buf, ispi->base + FDATA(i), bytes);
+ size -= bytes;
+ buf += bytes;
+ i++;
+ }
+
+ return 0;
+}
+
+/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */
+static int intel_spi_write_block(struct intel_spi *ispi, const void *buf,
+ size_t size)
+{
+ size_t bytes;
+ int i = 0;
+
+ if (size > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ while (size > 0) {
+ bytes = min_t(size_t, size, 4);
+ memcpy_toio(ispi->base + FDATA(i), buf, bytes);
+ size -= bytes;
+ buf += bytes;
+ i++;
+ }
+
+ return 0;
+}
+
+static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
+{
+ u32 val;
+
+ return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
+ !(val & HSFSTS_CTL_SCIP), 0,
+ INTEL_SPI_TIMEOUT * 1000);
+}
+
+static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
+{
+ u32 val;
+
+ return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
+ !(val & SSFSTS_CTL_SCIP), 0,
+ INTEL_SPI_TIMEOUT * 1000);
+}
+
+static int intel_spi_init(struct intel_spi *ispi)
+{
+ u32 opmenu0, opmenu1, val;
+ int i;
+
+ switch (ispi->info->type) {
+ case INTEL_SPI_BYT:
+ ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + BYT_PR;
+ ispi->nregions = BYT_FREG_NUM;
+
+ if (writeable) {
+ /* Disable write protection */
+ val = readl(ispi->base + BYT_BCR);
+ if (!(val & BYT_BCR_WPD)) {
+ val |= BYT_BCR_WPD;
+ writel(val, ispi->base + BYT_BCR);
+ val = readl(ispi->base + BYT_BCR);
+ }
+
+ ispi->writeable = !!(val & BYT_BCR_WPD);
+ }
+
+ break;
+
+ case INTEL_SPI_LPT:
+ ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + LPT_PR;
+ ispi->nregions = LPT_FREG_NUM;
+ break;
+
+ case INTEL_SPI_BXT:
+ ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + BXT_PR;
+ ispi->nregions = BXT_FREG_NUM;
+ ispi->erase_64k = true;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Disable #SMI generation */
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~HSFSTS_CTL_FSMIE;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ /*
+ * BIOS programs allowed opcodes and then locks down the register.
+ * So read back what opcodes it decided to support. That's the set
+ * we are going to support as well.
+ */
+ opmenu0 = readl(ispi->sregs + OPMENU0);
+ opmenu1 = readl(ispi->sregs + OPMENU1);
+
+ /*
+ * Some controllers can only do basic operations using hardware
+ * sequencer. All other operations are supposed to be carried out
+ * using software sequencer. If we find that BIOS has programmed
+ * opcodes for the software sequencer we use that over the hardware
+ * sequencer.
+ */
+ if (opmenu0 && opmenu1) {
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
+ ispi->opcodes[i] = opmenu0 >> i * 8;
+ ispi->opcodes[i + 4] = opmenu1 >> i * 8;
+ }
+
+ val = readl(ispi->sregs + PREOP_OPTYPE);
+ ispi->preopcodes[0] = val;
+ ispi->preopcodes[1] = val >> 8;
+
+ /* Disable #SMI generation from SW sequencer */
+ val = readl(ispi->sregs + SSFSTS_CTL);
+ val &= ~SSFSTS_CTL_FSMIE;
+ writel(val, ispi->sregs + SSFSTS_CTL);
+
+ ispi->swseq = true;
+ }
+
+ intel_spi_dump_regs(ispi);
+
+ return 0;
+}
+
+static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
+ if (ispi->opcodes[i] == opcode)
+ return i;
+ return -EINVAL;
+}
+
+static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
+ int len)
+{
+ u32 val, status;
+ int ret;
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK);
+
+ switch (opcode) {
+ case SPINOR_OP_RDID:
+ val |= HSFSTS_CTL_FCYCLE_RDID;
+ break;
+ case SPINOR_OP_WRSR:
+ val |= HSFSTS_CTL_FCYCLE_WRSR;
+ break;
+ case SPINOR_OP_RDSR:
+ val |= HSFSTS_CTL_FCYCLE_RDSR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ return -EACCES;
+
+ return 0;
+}
+
+static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, u8 *buf,
+ int len)
+{
+ u32 val, status;
+ int ret;
+
+ ret = intel_spi_opcode_index(ispi, opcode);
+ if (ret < 0)
+ return ret;
+
+ val = (len << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
+ val |= ret << SSFSTS_CTL_COP_SHIFT;
+ val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
+ val |= SSFSTS_CTL_SCGO;
+ writel(val, ispi->sregs + SSFSTS_CTL);
+
+ ret = intel_spi_wait_sw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + SSFSTS_CTL);
+ if (status & SSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & SSFSTS_CTL_AEL)
+ return -EACCES;
+
+ return 0;
+}
+
+static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
+{
+ struct intel_spi *ispi = nor->priv;
+ int ret;
+
+ /* Address of the first chip */
+ writel(0, ispi->base + FADDR);
+
+ if (ispi->swseq)
+ ret = intel_spi_sw_cycle(ispi, opcode, buf, len);
+ else
+ ret = intel_spi_hw_cycle(ispi, opcode, buf, len);
+
+ if (ret)
+ return ret;
+
+ return intel_spi_read_block(ispi, buf, len);
+}
+
+static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
+{
+ struct intel_spi *ispi = nor->priv;
+ int ret;
+
+ /*
+ * This is handled with atomic operation and preop code in Intel
+ * controller so skip it here now.
+ */
+ if (opcode == SPINOR_OP_WREN)
+ return 0;
+
+ writel(0, ispi->base + FADDR);
+
+ /* Write the value beforehand */
+ ret = intel_spi_write_block(ispi, buf, len);
+ if (ret)
+ return ret;
+
+ if (ispi->swseq)
+ return intel_spi_sw_cycle(ispi, opcode, buf, len);
+ return intel_spi_hw_cycle(ispi, opcode, buf, len);
+}
+
+static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
+ u_char *read_buf)
+{
+ struct intel_spi *ispi = nor->priv;
+ size_t block_size, retlen = 0;
+ u32 val, status;
+ ssize_t ret;
+
+ switch (nor->read_opcode) {
+ case SPINOR_OP_READ:
+ case SPINOR_OP_READ_FAST:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ while (len > 0) {
+ block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+
+ writel(from, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCYCLE_READ;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ ret = -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ ret = -EACCES;
+
+ if (ret < 0) {
+ dev_err(ispi->dev, "read error: %llx: %#x\n", from,
+ status);
+ return ret;
+ }
+
+ ret = intel_spi_read_block(ispi, read_buf, block_size);
+ if (ret)
+ return ret;
+
+ len -= block_size;
+ from += block_size;
+ retlen += block_size;
+ read_buf += block_size;
+ }
+
+ return retlen;
+}
+
+static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
+ const u_char *write_buf)
+{
+ struct intel_spi *ispi = nor->priv;
+ size_t block_size, retlen = 0;
+ u32 val, status;
+ ssize_t ret;
+
+ while (len > 0) {
+ block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+
+ writel(to, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCYCLE_WRITE;
+
+ /* Write enable */
+ if (ispi->preopcodes[1] == SPINOR_OP_WREN)
+ val |= SSFSTS_CTL_SPOP;
+ val |= SSFSTS_CTL_ACS;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_write_block(ispi, write_buf, block_size);
+ if (ret) {
+ dev_err(ispi->dev, "failed to write block\n");
+ return ret;
+ }
+
+ /* Start the write now */
+ val = readl(ispi->base + HSFSTS_CTL);
+ writel(val | HSFSTS_CTL_FGO, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret) {
+ dev_err(ispi->dev, "timeout\n");
+ return ret;
+ }
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ ret = -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ ret = -EACCES;
+
+ if (ret < 0) {
+ dev_err(ispi->dev, "write error: %llx: %#x\n", to,
+ status);
+ return ret;
+ }
+
+ len -= block_size;
+ to += block_size;
+ retlen += block_size;
+ write_buf += block_size;
+ }
+
+ return retlen;
+}
+
+static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
+{
+ size_t erase_size, len = nor->mtd.erasesize;
+ struct intel_spi *ispi = nor->priv;
+ u32 val, status, cmd;
+ int ret;
+
+ /* If the hardware can do 64k erase use that when possible */
+ if (len >= SZ_64K && ispi->erase_64k) {
+ cmd = HSFSTS_CTL_FCYCLE_ERASE_64K;
+ erase_size = SZ_64K;
+ } else {
+ cmd = HSFSTS_CTL_FCYCLE_ERASE;
+ erase_size = SZ_4K;
+ }
+
+ while (len > 0) {
+ writel(offs, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= cmd;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ return -EACCES;
+
+ offs += erase_size;
+ len -= erase_size;
+ }
+
+ return 0;
+}
+
+static bool intel_spi_is_protected(const struct intel_spi *ispi,
+ unsigned int base, unsigned int limit)
+{
+ int i;
+
+ for (i = 0; i < PR_NUM; i++) {
+ u32 pr_base, pr_limit, pr_value;
+
+ pr_value = readl(ispi->pregs + PR(i));
+ if (!(pr_value & (PR_WPE | PR_RPE)))
+ continue;
+
+ pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
+ pr_base = pr_value & PR_BASE_MASK;
+
+ if (pr_base >= base && pr_limit <= limit)
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * There will be a single partition holding all enabled flash regions. We
+ * call this "BIOS".
+ */
+static void intel_spi_fill_partition(struct intel_spi *ispi,
+ struct mtd_partition *part)
+{
+ u64 end;
+ int i;
+
+ memset(part, 0, sizeof(*part));
+
+ /* Start from the mandatory descriptor region */
+ part->size = 4096;
+ part->name = "BIOS";
+
+ /*
+ * Now try to find where this partition ends based on the flash
+ * region registers.
+ */
+ for (i = 1; i < ispi->nregions; i++) {
+ u32 region, base, limit;
+
+ region = readl(ispi->base + FREG(i));
+ base = region & FREG_BASE_MASK;
+ limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
+
+ if (base >= limit || limit == 0)
+ continue;
+
+ /*
+ * If any of the regions have protection bits set, make the
+ * whole partition read-only to be on the safe side.
+ */
+ if (intel_spi_is_protected(ispi, base, limit))
+ ispi->writeable = 0;
+
+ end = (limit << 12) + 4096;
+ if (end > part->size)
+ part->size = end;
+ }
+}
+
+struct intel_spi *intel_spi_probe(struct device *dev,
+ struct resource *mem, const struct intel_spi_boardinfo *info)
+{
+ struct mtd_partition part;
+ struct intel_spi *ispi;
+ int ret;
+
+ if (!info || !mem)
+ return ERR_PTR(-EINVAL);
+
+ ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL);
+ if (!ispi)
+ return ERR_PTR(-ENOMEM);
+
+ ispi->base = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(ispi->base))
+ return ispi->base;
+
+ ispi->dev = dev;
+ ispi->info = info;
+ ispi->writeable = info->writeable;
+
+ ret = intel_spi_init(ispi);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ispi->nor.dev = ispi->dev;
+ ispi->nor.priv = ispi;
+ ispi->nor.read_reg = intel_spi_read_reg;
+ ispi->nor.write_reg = intel_spi_write_reg;
+ ispi->nor.read = intel_spi_read;
+ ispi->nor.write = intel_spi_write;
+ ispi->nor.erase = intel_spi_erase;
+
+ ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL);
+ if (ret) {
+ dev_info(dev, "failed to locate the chip\n");
+ return ERR_PTR(ret);
+ }
+
+ intel_spi_fill_partition(ispi, &part);
+
+ /* Prevent writes if not explicitly enabled */
+ if (!ispi->writeable || !writeable)
+ ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
+
+ ret = mtd_device_parse_register(&ispi->nor.mtd, NULL, NULL, &part, 1);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return ispi;
+}
+EXPORT_SYMBOL_GPL(intel_spi_probe);
+
+int intel_spi_remove(struct intel_spi *ispi)
+{
+ return mtd_device_unregister(&ispi->nor.mtd);
+}
+EXPORT_SYMBOL_GPL(intel_spi_remove);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/spi-nor/intel-spi.h b/drivers/mtd/spi-nor/intel-spi.h
new file mode 100644
index 0000000..5ab7dc2
--- /dev/null
+++ b/drivers/mtd/spi-nor/intel-spi.h
@@ -0,0 +1,24 @@
+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef INTEL_SPI_H
+#define INTEL_SPI_H
+
+#include <linux/platform_data/intel-spi.h>
+
+struct intel_spi;
+struct resource;
+
+struct intel_spi *intel_spi_probe(struct device *dev,
+ struct resource *mem, const struct intel_spi_boardinfo *info);
+int intel_spi_remove(struct intel_spi *ispi);
+
+#endif /* INTEL_SPI_H */
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index da7cd69..1ae872b 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -75,6 +75,16 @@ struct flash_info {
* bit. Must be used with
* SPI_NOR_HAS_LOCK.
*/
+#define SPI_S3AN BIT(10) /*
+ * Xilinx Spartan 3AN In-System Flash
+ * (MFR cannot be used for probing
+ * because it has the same value as
+ * ATMEL flashes)
+ */
+#define SPI_NOR_4B_OPCODES BIT(11) /*
+ * Use dedicated 4byte address op codes
+ * to support memory size above 128Mib.
+ */
};
#define JEDEC_MFR(info) ((info)->id[0])
@@ -122,7 +132,7 @@ static int read_fsr(struct spi_nor *nor)
/*
* Read configuration register, returning its value in the
* location. Return the configuration register value.
- * Returns negative if error occured.
+ * Returns negative if error occurred.
*/
static int read_cr(struct spi_nor *nor)
{
@@ -188,6 +198,78 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
return mtd->priv;
}
+
+static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (table[i][0] == opcode)
+ return table[i][1];
+
+ /* No conversion found, keep input op code. */
+ return opcode;
+}
+
+static inline u8 spi_nor_convert_3to4_read(u8 opcode)
+{
+ static const u8 spi_nor_3to4_read[][2] = {
+ { SPINOR_OP_READ, SPINOR_OP_READ_4B },
+ { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B },
+ { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B },
+ { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
+ { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
+ { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
+ ARRAY_SIZE(spi_nor_3to4_read));
+}
+
+static inline u8 spi_nor_convert_3to4_program(u8 opcode)
+{
+ static const u8 spi_nor_3to4_program[][2] = {
+ { SPINOR_OP_PP, SPINOR_OP_PP_4B },
+ { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B },
+ { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
+ ARRAY_SIZE(spi_nor_3to4_program));
+}
+
+static inline u8 spi_nor_convert_3to4_erase(u8 opcode)
+{
+ static const u8 spi_nor_3to4_erase[][2] = {
+ { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B },
+ { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B },
+ { SPINOR_OP_SE, SPINOR_OP_SE_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
+ ARRAY_SIZE(spi_nor_3to4_erase));
+}
+
+static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
+ const struct flash_info *info)
+{
+ /* Do some manufacturer fixups first */
+ switch (JEDEC_MFR(info)) {
+ case SNOR_MFR_SPANSION:
+ /* No small sector erase for 4-byte command set */
+ nor->erase_opcode = SPINOR_OP_SE;
+ nor->mtd.erasesize = info->sector_size;
+ break;
+
+ default:
+ break;
+ }
+
+ nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
+ nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
+ nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
+}
+
/* Enable/disable 4-byte addressing mode. */
static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
int enable)
@@ -217,6 +299,21 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
}
}
+
+static int s3an_sr_ready(struct spi_nor *nor)
+{
+ int ret;
+ u8 val;
+
+ ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
+ return ret;
+ }
+
+ return !!(val & XSR_RDY);
+}
+
static inline int spi_nor_sr_ready(struct spi_nor *nor)
{
int sr = read_sr(nor);
@@ -238,7 +335,11 @@ static inline int spi_nor_fsr_ready(struct spi_nor *nor)
static int spi_nor_ready(struct spi_nor *nor)
{
int sr, fsr;
- sr = spi_nor_sr_ready(nor);
+
+ if (nor->flags & SNOR_F_READY_XSR_RDY)
+ sr = s3an_sr_ready(nor);
+ else
+ sr = spi_nor_sr_ready(nor);
if (sr < 0)
return sr;
fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
@@ -320,6 +421,27 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
}
/*
+ * This code converts an address to the Default Address Mode, that has non
+ * power of two page sizes. We must support this mode because it is the default
+ * mode supported by Xilinx tools, it can access the whole flash area and
+ * changing over to the Power-of-two mode is irreversible and corrupts the
+ * original data.
+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
+ * 4 MiB.
+ */
+static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
+{
+ unsigned int offset;
+ unsigned int page;
+
+ offset = addr % nor->page_size;
+ page = addr / nor->page_size;
+ page <<= (nor->page_size > 512) ? 10 : 9;
+
+ return page | offset;
+}
+
+/*
* Initiate the erasure of a single sector
*/
static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
@@ -327,6 +449,9 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
int i;
+ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
+ addr = spi_nor_s3an_addr_convert(nor, addr);
+
if (nor->erase)
return nor->erase(nor, addr);
@@ -368,7 +493,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
return ret;
/* whole-chip erase? */
- if (len == mtd->size) {
+ if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
unsigned long timeout;
write_enable(nor);
@@ -782,6 +907,19 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
.addr_width = (_addr_width), \
.flags = (_flags),
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff \
+ }, \
+ .id_len = 3, \
+ .sector_size = (8*_page_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = _page_size, \
+ .addr_width = 3, \
+ .flags = SPI_NOR_NO_FR | SPI_S3AN,
+
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
@@ -821,7 +959,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
/* ESMT */
- { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
/* Everspin */
{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
@@ -833,6 +971,11 @@ static const struct flash_info spi_nor_ids[] = {
/* GigaDevice */
{
+ "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ {
"gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
@@ -1014,6 +1157,13 @@ static const struct flash_info spi_nor_ids[] = {
{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+
+ /* Xilinx S3AN Internal Flash */
+ { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
+ { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
+ { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
{ },
};
@@ -1054,7 +1204,12 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
return ret;
while (len) {
- ret = nor->read(nor, from, len, buf);
+ loff_t addr = from;
+
+ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
+ addr = spi_nor_s3an_addr_convert(nor, addr);
+
+ ret = nor->read(nor, addr, len, buf);
if (ret == 0) {
/* We shouldn't see 0-length reads */
ret = -EIO;
@@ -1175,17 +1330,32 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
for (i = 0; i < len; ) {
ssize_t written;
+ loff_t addr = to + i;
+
+ /*
+ * If page_size is a power of two, the offset can be quickly
+ * calculated with an AND operation. On the other cases we
+ * need to do a modulus operation (more expensive).
+ * Power of two numbers have only one bit set and we can use
+ * the instruction hweight32 to detect if we need to do a
+ * modulus (do_div()) or not.
+ */
+ if (hweight32(nor->page_size) == 1) {
+ page_offset = addr & (nor->page_size - 1);
+ } else {
+ uint64_t aux = addr;
- page_offset = (to + i) & (nor->page_size - 1);
- WARN_ONCE(page_offset,
- "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
- page_offset);
+ page_offset = do_div(aux, nor->page_size);
+ }
/* the size of data remaining on the first page */
page_remain = min_t(size_t,
nor->page_size - page_offset, len - i);
+ if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
+ addr = spi_nor_s3an_addr_convert(nor, addr);
+
write_enable(nor);
- ret = nor->write(nor, to + i, page_remain, buf + i);
+ ret = nor->write(nor, addr, page_remain, buf + i);
if (ret < 0)
goto write_err;
written = ret;
@@ -1216,6 +1386,9 @@ static int macronix_quad_enable(struct spi_nor *nor)
val = read_sr(nor);
if (val < 0)
return val;
+ if (val & SR_QUAD_EN_MX)
+ return 0;
+
write_enable(nor);
write_sr(nor, val | SR_QUAD_EN_MX);
@@ -1236,7 +1409,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
* Write status Register and configuration register with 2 bytes
* The first byte will be written to the status register, while the
* second byte will be written to the configuration register.
- * Return negative if error occured.
+ * Return negative if error occurred.
*/
static int write_sr_cr(struct spi_nor *nor, u16 val)
{
@@ -1312,6 +1485,47 @@ static int spi_nor_check(struct spi_nor *nor)
return 0;
}
+static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
+{
+ int ret;
+ u8 val;
+
+ ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
+ if (ret < 0) {
+ dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
+ return ret;
+ }
+
+ nor->erase_opcode = SPINOR_OP_XSE;
+ nor->program_opcode = SPINOR_OP_XPP;
+ nor->read_opcode = SPINOR_OP_READ;
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+ /*
+ * This flashes have a page size of 264 or 528 bytes (known as
+ * Default addressing mode). It can be changed to a more standard
+ * Power of two mode where the page size is 256/512. This comes
+ * with a price: there is 3% less of space, the data is corrupted
+ * and the page size cannot be changed back to default addressing
+ * mode.
+ *
+ * The current addressing mode can be read from the XRDSR register
+ * and should not be changed, because is a destructive operation.
+ */
+ if (val & XSR_PAGESIZE) {
+ /* Flash in Power of 2 mode */
+ nor->page_size = (nor->page_size == 264) ? 256 : 512;
+ nor->mtd.writebufsize = nor->page_size;
+ nor->mtd.size = 8 * nor->page_size * info->n_sectors;
+ nor->mtd.erasesize = 8 * nor->page_size;
+ } else {
+ /* Flash in Default addressing mode */
+ nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
+ }
+
+ return 0;
+}
+
int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
const struct flash_info *info = NULL;
@@ -1360,6 +1574,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
mutex_init(&nor->lock);
/*
+ * Make sure the XSR_RDY flag is set before calling
+ * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+ * with Atmel spi-nor
+ */
+ if (info->flags & SPI_S3AN)
+ nor->flags |= SNOR_F_READY_XSR_RDY;
+
+ /*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set
*/
@@ -1483,27 +1705,10 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
- if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) {
- /* Dedicated 4-byte command set */
- switch (nor->flash_read) {
- case SPI_NOR_QUAD:
- nor->read_opcode = SPINOR_OP_READ4_1_1_4;
- break;
- case SPI_NOR_DUAL:
- nor->read_opcode = SPINOR_OP_READ4_1_1_2;
- break;
- case SPI_NOR_FAST:
- nor->read_opcode = SPINOR_OP_READ4_FAST;
- break;
- case SPI_NOR_NORMAL:
- nor->read_opcode = SPINOR_OP_READ4;
- break;
- }
- nor->program_opcode = SPINOR_OP_PP_4B;
- /* No small sector erase for 4-byte command set */
- nor->erase_opcode = SPINOR_OP_SE_4B;
- mtd->erasesize = info->sector_size;
- } else
+ if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
+ info->flags & SPI_NOR_4B_OPCODES)
+ spi_nor_set_4byte_opcodes(nor, info);
+ else
set_4byte(nor, info, 1);
} else {
nor->addr_width = 3;
@@ -1517,6 +1722,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
nor->read_dummy = spi_nor_read_dummy_cycles(nor);
+ if (info->flags & SPI_S3AN) {
+ ret = s3an_nor_scan(info, nor);
+ if (ret)
+ return ret;
+ }
+
dev_info(dev, "%s (%lld Kbytes)\n", info->name,
(long long)mtd->size >> 10);
OpenPOWER on IntegriCloud