diff options
Diffstat (limited to 'drivers/mtd/onenand/onenand_base.c')
| -rw-r--r-- | drivers/mtd/onenand/onenand_base.c | 718 |
1 files changed, 479 insertions, 239 deletions
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index a53a73f..84ec40d 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -23,8 +23,7 @@ /** * onenand_oob_64 - oob info for large (2KB) page */ -static struct nand_oobinfo onenand_oob_64 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout onenand_oob_64 = { .eccbytes = 20, .eccpos = { 8, 9, 10, 11, 12, @@ -34,14 +33,14 @@ static struct nand_oobinfo onenand_oob_64 = { }, .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2}, - {24, 3}, {46, 2}, {40, 3}, {62, 2} } + {34, 3}, {46, 2}, {50, 3}, {62, 2} + } }; /** * onenand_oob_32 - oob info for middle (1KB) page */ -static struct nand_oobinfo onenand_oob_32 = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout onenand_oob_32 = { .eccbytes = 10, .eccpos = { 8, 9, 10, 11, 12, @@ -190,7 +189,7 @@ static int onenand_buffer_address(int dataram1, int sectors, int count) static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) { struct onenand_chip *this = mtd->priv; - int value, readcmd = 0; + int value, readcmd = 0, block_cmd = 0; int block, page; /* Now we use page size operation */ int sectors = 4, count = 4; @@ -206,6 +205,8 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le case ONENAND_CMD_ERASE: case ONENAND_CMD_BUFFERRAM: + case ONENAND_CMD_OTP_ACCESS: + block_cmd = 1; block = (int) (addr >> this->erase_shift); page = -1; break; @@ -233,6 +234,12 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le /* Write 'DFS, FBA' of Flash */ value = onenand_block_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + + if (block_cmd) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + } } if (page != -1) { @@ -301,6 +308,7 @@ static int onenand_wait(struct mtd_info *mtd, int state) if (state != FL_READING) cond_resched(); + touch_softlockup_watchdog(); } /* To get correct interrupt status in timeout case */ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); @@ -344,7 +352,7 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) if (ONENAND_CURRENT_BUFFERRAM(this)) { if (area == ONENAND_DATARAM) - return mtd->oobblock; + return mtd->writesize; if (area == ONENAND_SPARERAM) return mtd->oobsize; } @@ -372,6 +380,17 @@ static int onenand_read_bufferram(struct mtd_info *mtd, int area, bufferram += onenand_bufferram_offset(mtd, area); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + memcpy(buffer, bufferram + offset, count); return 0; @@ -399,6 +418,17 @@ static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area, this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + + /* Align with word(16-bit) size */ + count--; + + /* Read word and save byte */ + word = this->read_word(bufferram + offset + count); + buffer[count] = (word & 0xff); + } + memcpy(buffer, bufferram + offset, count); this->mmcontrol(mtd, 0); @@ -426,6 +456,22 @@ static int onenand_write_bufferram(struct mtd_info *mtd, int area, bufferram += onenand_bufferram_offset(mtd, area); + if (ONENAND_CHECK_BYTE_ACCESS(count)) { + unsigned short word; + int byte_offset; + + /* Align with word(16-bit) size */ + count--; + + /* Calculate byte access offset */ + byte_offset = offset + count; + + /* Read word and save byte */ + word = this->read_word(bufferram + byte_offset); + word = (word & ~0xff) | buffer[count]; + this->write_word(word, bufferram + byte_offset); + } + memcpy(bufferram + offset, buffer, count); return 0; @@ -549,31 +595,28 @@ static void onenand_release_device(struct mtd_info *mtd) } /** - * onenand_read_ecc - [MTD Interface] Read data with ECC + * onenand_read - [MTD Interface] Read data from flash * @param mtd MTD device structure * @param from offset to read from * @param len number of bytes to read * @param retlen pointer to variable to store the number of read bytes * @param buf the databuffer to put data - * @param oob_buf filesystem supplied oob data buffer - * @param oobsel oob selection structure * - * OneNAND read with ECC - */ -static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf, - u_char *oob_buf, struct nand_oobinfo *oobsel) + * Read with ecc +*/ +static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) { struct onenand_chip *this = mtd->priv; int read = 0, column; int thislen; int ret = 0; - DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); /* Do not allow reads past end of device */ if ((from + len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n"); *retlen = 0; return -EINVAL; } @@ -584,14 +627,14 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, /* TODO handling oob */ while (read < len) { - thislen = min_t(int, mtd->oobblock, len - read); + thislen = min_t(int, mtd->writesize, len - read); - column = from & (mtd->oobblock - 1); - if (column + thislen > mtd->oobblock) - thislen = mtd->oobblock - column; + column = from & (mtd->writesize - 1); + if (column + thislen > mtd->writesize) + thislen = mtd->writesize - column; if (!onenand_check_bufferram(mtd, from)) { - this->command(mtd, ONENAND_CMD_READ, from, mtd->oobblock); + this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize); ret = this->wait(mtd, FL_READING); /* First copy data and check return value for ECC handling */ @@ -606,7 +649,7 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, break; if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: read failed = %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: read failed = %d\n", ret); goto out; } @@ -628,23 +671,7 @@ out: } /** - * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc - * @param mtd MTD device structure - * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data - * - * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL -*/ -static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); -} - -/** - * onenand_read_oob - [MTD Interface] OneNAND read out-of-band + * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band * @param mtd MTD device structure * @param from offset to read from * @param len number of bytes to read @@ -653,8 +680,8 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, * * OneNAND read out-of-band data from the spare area */ -static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) +int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) { struct onenand_chip *this = mtd->priv; int read = 0, thislen, column; @@ -704,7 +731,7 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, /* Read more? */ if (read < len) { /* Page size */ - from += mtd->oobblock; + from += mtd->writesize; column = 0; } } @@ -717,8 +744,53 @@ out: return ret; } +/** + * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @ops: oob operation description structure + */ +static int onenand_read_oob(struct mtd_info *mtd, loff_t from, + struct mtd_oob_ops *ops) +{ + BUG_ON(ops->mode != MTD_OOB_PLACE); + + return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->len, + &ops->retlen, ops->oobbuf); +} + #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE /** + * onenand_verify_oob - [GENERIC] verify the oob contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param to offset to read from + * @param len number of bytes to read and compare + * + */ +static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len) +{ + struct onenand_chip *this = mtd->priv; + char *readp = this->page_buf; + int column = to & (mtd->oobsize - 1); + int status, i; + + this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize); + onenand_update_bufferram(mtd, to, 0); + status = this->wait(mtd, FL_READING); + if (status) + return status; + + this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len); + + for(i = 0; i < len; i++) + if (buf[i] != 0xFF && buf[i] != readp[i]) + return -EBADMSG; + + return 0; +} + +/** * onenand_verify_page - [GENERIC] verify the chip contents after a write * @param mtd MTD device structure * @param buf the databuffer to verify @@ -731,7 +803,7 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr) void __iomem *dataram0, *dataram1; int ret = 0; - this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock); + this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize); ret = this->wait(mtd, FL_READING); if (ret) @@ -741,53 +813,51 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr) /* Check, if the two dataram areas are same */ dataram0 = this->base + ONENAND_DATARAM; - dataram1 = dataram0 + mtd->oobblock; + dataram1 = dataram0 + mtd->writesize; - if (memcmp(dataram0, dataram1, mtd->oobblock)) + if (memcmp(dataram0, dataram1, mtd->writesize)) return -EBADMSG; return 0; } #else #define onenand_verify_page(...) (0) +#define onenand_verify_oob(...) (0) #endif -#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0) +#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0) /** - * onenand_write_ecc - [MTD Interface] OneNAND write with ECC + * onenand_write - [MTD Interface] write buffer to FLASH * @param mtd MTD device structure * @param to offset to write to * @param len number of bytes to write * @param retlen pointer to variable to store the number of written bytes * @param buf the data to write - * @param eccbuf filesystem supplied oob data buffer - * @param oobsel oob selection structure * - * OneNAND write with ECC + * Write with ECC */ -static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf, - u_char *eccbuf, struct nand_oobinfo *oobsel) +static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { struct onenand_chip *this = mtd->priv; int written = 0; int ret = 0; - DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); /* Initialize retlen, in case of early exit */ *retlen = 0; /* Do not allow writes past end of device */ if (unlikely((to + len) > mtd->size)) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt write to past end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n"); return -EINVAL; } /* Reject writes, which are not page aligned */ if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt to write not page aligned data\n"); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n"); return -EINVAL; } @@ -796,20 +866,20 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, /* Loop until all data write */ while (written < len) { - int thislen = min_t(int, mtd->oobblock, len - written); + int thislen = min_t(int, mtd->writesize, len - written); - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize); this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); onenand_update_bufferram(mtd, to, 1); ret = this->wait(mtd, FL_WRITING); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: write filaed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret); goto out; } @@ -818,7 +888,7 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, /* Only check verify write turn on */ ret = onenand_verify_page(mtd, (u_char *) buf, to); if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: verify failed %d\n", ret); + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret); goto out; } @@ -839,24 +909,7 @@ out: } /** - * onenand_write - [MTD Interface] compability function for onenand_write_ecc - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * - * This function simply calls onenand_write_ecc - * with oob buffer and oobsel = NULL - */ -static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); -} - -/** - * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * onenand_do_write_oob - [Internal] OneNAND write out-of-band * @param mtd MTD device structure * @param to offset to write to * @param len number of bytes to write @@ -865,11 +918,11 @@ static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, * * OneNAND write out-of-band */ -static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) +static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) { struct onenand_chip *this = mtd->priv; - int column, status; + int column, ret = 0; int written = 0; DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); @@ -894,16 +947,27 @@ static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + /* We send data to spare ram with oobsize + * to prevent byte access */ + memset(this->page_buf, 0xff, mtd->oobsize); + memcpy(this->page_buf + column, buf, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize); this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); - status = this->wait(mtd, FL_WRITING); - if (status) + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret); + goto out; + } + + ret = onenand_verify_oob(mtd, buf, to, thislen); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret); goto out; + } written += thislen; @@ -920,145 +984,22 @@ out: *retlen = written; - return 0; + return ret; } /** - * onenand_writev_ecc - [MTD Interface] write with iovec with ecc - * @param mtd MTD device structure - * @param vecs the iovectors to write - * @param count number of vectors - * @param to offset to write to - * @param retlen pointer to variable to store the number of written bytes - * @param eccbuf filesystem supplied oob data buffer - * @param oobsel oob selection structure - * - * OneNAND write with iovec with ecc + * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band + * @mtd: MTD device structure + * @from: offset to read from + * @ops: oob operation description structure */ -static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen, - u_char *eccbuf, struct nand_oobinfo *oobsel) +static int onenand_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops) { - struct onenand_chip *this = mtd->priv; - unsigned char *pbuf; - size_t total_len, len; - int i, written = 0; - int ret = 0; - - /* Preset written len for early exit */ - *retlen = 0; - - /* Calculate total length of data */ - total_len = 0; - for (i = 0; i < count; i++) - total_len += vecs[i].iov_len; - - DEBUG(MTD_DEBUG_LEVEL3, "onenand_writev_ecc: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); - - /* Do not allow write past end of the device */ - if (unlikely((to + total_len) > mtd->size)) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempted write past end of device\n"); - return -EINVAL; - } - - /* Reject writes, which are not page aligned */ - if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(total_len))) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempt to write not page aligned data\n"); - return -EINVAL; - } - - /* Grab the lock and see if the device is available */ - onenand_get_device(mtd, FL_WRITING); - - /* TODO handling oob */ - - /* Loop until all keve's data has been written */ - len = 0; - while (count) { - pbuf = this->page_buf; - /* - * If the given tuple is >= pagesize then - * write it out from the iov - */ - if ((vecs->iov_len - len) >= mtd->oobblock) { - pbuf = vecs->iov_base + len; - - len += mtd->oobblock; - - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } else { - int cnt = 0, thislen; - while (cnt < mtd->oobblock) { - thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len); - memcpy(this->page_buf + cnt, vecs->iov_base + len, thislen); - cnt += thislen; - len += thislen; - - /* Check, if we have to switch to the next tuple */ - if (len >= (int) vecs->iov_len) { - vecs++; - len = 0; - count--; - } - } - } - - this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + BUG_ON(ops->mode != MTD_OOB_PLACE); - this->write_bufferram(mtd, ONENAND_DATARAM, pbuf, 0, mtd->oobblock); - this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); - - this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); - - onenand_update_bufferram(mtd, to, 1); - - ret = this->wait(mtd, FL_WRITING); - if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: write failed %d\n", ret); - goto out; - } - - - /* Only check verify write turn on */ - ret = onenand_verify_page(mtd, (u_char *) pbuf, to); - if (ret) { - DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: verify failed %d\n", ret); - goto out; - } - - written += mtd->oobblock; - - to += mtd->oobblock; - } - -out: - /* Deselect and wakt up anyone waiting on the device */ - onenand_release_device(mtd); - - *retlen = written; - - return 0; -} - -/** - * onenand_writev - [MTD Interface] compabilty function for onenand_writev_ecc - * @param mtd MTD device structure - * @param vecs the iovectors to write - * @param count number of vectors - * @param to offset to write to - * @param retlen pointer to variable to store the number of written bytes - * - * OneNAND write with kvec. This just calls the ecc function - */ -static int onenand_writev(struct mtd_info *mtd, const struct kvec *vecs, - unsigned long count, loff_t to, size_t *retlen) -{ - return onenand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL); + return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->len, + &ops->retlen, ops->oobbuf); } /** @@ -1227,7 +1168,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* We write two bytes, so we dont have to mess with 16 bit access */ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); - return mtd->write_oob(mtd, ofs , 2, &retlen, buf); + return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf); } /** @@ -1324,6 +1265,304 @@ static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) return 0; } +#ifdef CONFIG_MTD_ONENAND_OTP + +/* Interal OTP operation */ +typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, + size_t *retlen, u_char *buf); + +/** + * do_otp_read - [DEFAULT] Read OTP block area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of readbytes + * @param buf the databuffer to put/get data + * + * Read OTP block area. + */ +static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->read(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_write - [DEFAULT] Write OTP block area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write OTP block area. + */ +static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + unsigned char *pbuf = buf; + int ret; + + /* Force buffer page aligned */ + if (len < mtd->writesize) { + memcpy(this->page_buf, buf, len); + memset(this->page_buf + len, 0xff, mtd->writesize - len); + pbuf = this->page_buf; + len = mtd->writesize; + } + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = mtd->write(mtd, from, len, retlen, pbuf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * do_otp_lock - [DEFAULT] Lock OTP block area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to lock + * @param retlen pointer to variable to store the number of lock bytes + * @param buf the databuffer to put/get data + * + * Lock OTP block area. + */ +static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int ret; + + /* Enter OTP access mode */ + this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); + this->wait(mtd, FL_OTPING); + + ret = onenand_do_write_oob(mtd, from, len, retlen, buf); + + /* Exit OTP access mode */ + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + this->wait(mtd, FL_RESETING); + + return ret; +} + +/** + * onenand_otp_walk - [DEFAULT] Handle OTP operation + * @param mtd MTD device structure + * @param from The offset to read/write + * @param len number of bytes to read/write + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * @param action do given action + * @param mode specify user and factory + * + * Handle OTP operation. + */ +static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int mode) +{ + struct onenand_chip *this = mtd->priv; + int otp_pages; + int density; + int ret = 0; + + *retlen = 0; + + density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT; + if (density < ONENAND_DEVICE_DENSITY_512Mb) + otp_pages = 20; + else + otp_pages = 10; + + if (mode == MTD_OTP_FACTORY) { + from += mtd->writesize * otp_pages; + otp_pages = 64 - otp_pages; + } + + /* Check User/Factory boundary */ + if (((mtd->writesize * otp_pages) - (from + len)) < 0) + return 0; + + while (len > 0 && otp_pages > 0) { + if (!action) { /* OTP Info functions */ + struct otp_info *otpinfo; + + len -= sizeof(struct otp_info); + if (len <= 0) + return -ENOSPC; + + otpinfo = (struct otp_info *) buf; + otpinfo->start = from; + otpinfo->length = mtd->writesize; + otpinfo->locked = 0; + + from += mtd->writesize; + buf += sizeof(struct otp_info); + *retlen += sizeof(struct otp_info); + } else { + size_t tmp_retlen; + int size = len; + + ret = action(mtd, from, len, &tmp_retlen, buf); + + buf += size; + len -= size; + *retlen += size; + + if (ret < 0) + return ret; + } + otp_pages--; + } + + return 0; +} + +/** + * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read factory OTP info. + */ +static int onenand_get_fact_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY); + + return ret ? : retlen; +} + +/** + * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read factory OTP area. + */ +static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY); +} + +/** + * onenand_get_user_prot_info - [MTD Interface] Read user OTP info + * @param mtd MTD device structure + * @param buf the databuffer to put/get data + * @param len number of bytes to read + * + * Read user OTP info. + */ +static int onenand_get_user_prot_info(struct mtd_info *mtd, + struct otp_info *buf, size_t len) +{ + size_t retlen; + int ret; + + ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER); + + return ret ? : retlen; +} + +/** + * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area + * @param mtd MTD device structure + * @param from The offset to read + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put/get data + * + * Read user OTP area. + */ +static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER); +} + +/** + * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area + * @param mtd MTD device structure + * @param from The offset to write + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of write bytes + * @param buf the databuffer to put/get data + * + * Write user OTP area. + */ +static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, u_char *buf) +{ + return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER); +} + +/** + * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area + * @param mtd MTD device structure + * @param from The offset to lock + * @param len number of bytes to unlock + * + * Write lock mark on spare area in page 0 in OTP block + */ +static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) +{ + unsigned char oob_buf[64]; + size_t retlen; + int ret; + + memset(oob_buf, 0xff, mtd->oobsize); + /* + * Note: OTP lock operation + * OTP block : 0xXXFC + * 1st block : 0xXXF3 (If chip support) + * Both : 0xXXF0 (If chip support) + */ + oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC; + + /* + * Write lock mark to 8th word of sector0 of page0 of the spare0. + * We write 16 bytes spare area instead of 2 bytes. + */ + from = 0; + len = 16; + + ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER); + + return ret ? : retlen; +} +#endif /* CONFIG_MTD_ONENAND_OTP */ + /** * onenand_print_device_info - Print device ID * @param device device ID @@ -1423,15 +1662,15 @@ static int onenand_probe(struct mtd_info *mtd) /* OneNAND page size & block size */ /* The data buffer size is equal to page size */ - mtd->oobblock = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); - mtd->oobsize = mtd->oobblock >> 5; + mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + mtd->oobsize = mtd->writesize >> 5; /* Pagers per block is always 64 in OneNAND */ - mtd->erasesize = mtd->oobblock << 6; + mtd->erasesize = mtd->writesize << 6; this->erase_shift = ffs(mtd->erasesize) - 1; - this->page_shift = ffs(mtd->oobblock) - 1; + this->page_shift = ffs(mtd->writesize) - 1; this->ppb_shift = (this->erase_shift - this->page_shift); - this->page_mask = (mtd->erasesize / mtd->oobblock) - 1; + this->page_mask = (mtd->erasesize / mtd->writesize) - 1; /* REVIST: Multichip handling */ @@ -1475,7 +1714,6 @@ static void onenand_resume(struct mtd_info *mtd) "in suspended state\n"); } - /** * onenand_scan - [OneNAND Interface] Scan for the OneNAND device * @param mtd MTD device structure @@ -1522,7 +1760,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) /* Allocate buffers, if necessary */ if (!this->page_buf) { size_t len; - len = mtd->oobblock + mtd->oobsize; + len = mtd->writesize + mtd->oobsize; this->page_buf = kmalloc(len, GFP_KERNEL); if (!this->page_buf) { printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n"); @@ -1537,40 +1775,42 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) switch (mtd->oobsize) { case 64: - this->autooob = &onenand_oob_64; + this->ecclayout = &onenand_oob_64; break; case 32: - this->autooob = &onenand_oob_32; + this->ecclayout = &onenand_oob_32; break; default: printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n", mtd->oobsize); /* To prevent kernel oops */ - this->autooob = &onenand_oob_32; + this->ecclayout = &onenand_oob_32; break; } - memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); + mtd->ecclayout = this->ecclayout; /* Fill in remaining MTD driver data */ mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; + mtd->flags = MTD_CAP_NANDFLASH; mtd->ecctype = MTD_ECC_SW; mtd->erase = onenand_erase; mtd->point = NULL; mtd->unpoint = NULL; mtd->read = onenand_read; mtd->write = onenand_write; - mtd->read_ecc = onenand_read_ecc; - mtd->write_ecc = onenand_write_ecc; mtd->read_oob = onenand_read_oob; mtd->write_oob = onenand_write_oob; - mtd->readv = NULL; - mtd->readv_ecc = NULL; - mtd->writev = onenand_writev; - mtd->writev_ecc = onenand_writev_ecc; +#ifdef CONFIG_MTD_ONENAND_OTP + mtd->get_fact_prot_info = onenand_get_fact_prot_info; + mtd->read_fact_prot_reg = onenand_read_fact_prot_reg; + mtd->get_user_prot_info = onenand_get_user_prot_info; + mtd->read_user_prot_reg = onenand_read_user_prot_reg; + mtd->write_user_prot_reg = onenand_write_user_prot_reg; + mtd->lock_user_prot_reg = onenand_lock_user_prot_reg; +#endif mtd->sync = onenand_sync; mtd->lock = NULL; mtd->unlock = onenand_unlock; |
