diff options
Diffstat (limited to 'drivers/mtd/nand/s3c2410.c')
| -rw-r--r-- | drivers/mtd/nand/s3c2410.c | 268 |
1 files changed, 181 insertions, 87 deletions
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 8e375d5..11dc7e6 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -74,6 +74,14 @@ static struct nand_ecclayout nand_hw_eccoob = { struct s3c2410_nand_info; +/** + * struct s3c2410_nand_mtd - driver MTD structure + * @mtd: The MTD instance to pass to the MTD layer. + * @chip: The NAND chip information. + * @set: The platform information supplied for this set of NAND chips. + * @info: Link back to the hardware information. + * @scan_res: The result from calling nand_scan_ident(). +*/ struct s3c2410_nand_mtd { struct mtd_info mtd; struct nand_chip chip; @@ -90,6 +98,21 @@ enum s3c_cpu_type { /* overview of the s3c2410 nand state */ +/** + * struct s3c2410_nand_info - NAND controller state. + * @mtds: An array of MTD instances on this controoler. + * @platform: The platform data for this board. + * @device: The platform device we bound to. + * @area: The IO area resource that came from request_mem_region(). + * @clk: The clock resource for this controller. + * @regs: The area mapped for the hardware registers described by @area. + * @sel_reg: Pointer to the register controlling the NAND selection. + * @sel_bit: The bit in @sel_reg to select the NAND chip. + * @mtd_count: The number of MTDs created from this controller. + * @save_sel: The contents of @sel_reg to be saved over suspend. + * @clk_rate: The clock rate from @clk. + * @cpu_type: The exact type of this controller. + */ struct s3c2410_nand_info { /* mtd info */ struct nand_hw_control controller; @@ -145,12 +168,19 @@ static inline int allow_clk_stop(struct s3c2410_nand_info *info) #define NS_IN_KHZ 1000000 +/** + * s3c_nand_calc_rate - calculate timing data. + * @wanted: The cycle time in nanoseconds. + * @clk: The clock rate in kHz. + * @max: The maximum divider value. + * + * Calculate the timing value from the given parameters. + */ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) { int result; - result = (wanted * clk) / NS_IN_KHZ; - result++; + result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ); pr_debug("result %d from %ld, %d\n", result, clk, wanted); @@ -169,13 +199,21 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) /* controller setup */ +/** + * s3c2410_nand_setrate - setup controller timing information. + * @info: The controller instance. + * + * Given the information supplied by the platform, calculate and set + * the necessary timing registers in the hardware to generate the + * necessary timing cycles to the hardware. + */ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) { struct s3c2410_platform_nand *plat = info->platform; int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4; int tacls, twrph0, twrph1; unsigned long clkrate = clk_get_rate(info->clk); - unsigned long set, cfg, mask; + unsigned long uninitialized_var(set), cfg, uninitialized_var(mask); unsigned long flags; /* calculate the timing information for the controller */ @@ -215,9 +253,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) case TYPE_S3C2440: case TYPE_S3C2412: - mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) | - S3C2410_NFCONF_TWRPH0(7) | - S3C2410_NFCONF_TWRPH1(7)); + mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) | + S3C2440_NFCONF_TWRPH0(7) | + S3C2440_NFCONF_TWRPH1(7)); set = S3C2440_NFCONF_TACLS(tacls - 1); set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1); @@ -225,14 +263,9 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) break; default: - /* keep compiler happy */ - mask = 0; - set = 0; BUG(); } - dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg); - local_irq_save(flags); cfg = readl(info->regs + S3C2410_NFCONF); @@ -242,9 +275,18 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) local_irq_restore(flags); + dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg); + return 0; } +/** + * s3c2410_nand_inithw - basic hardware initialisation + * @info: The hardware state. + * + * Do the basic initialisation of the hardware, using s3c2410_nand_setrate() + * to setup the hardware access speeds and set the controller to be enabled. +*/ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) { int ret; @@ -268,8 +310,19 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) return 0; } -/* select chip */ - +/** + * s3c2410_nand_select_chip - select the given nand chip + * @mtd: The MTD instance for this chip. + * @chip: The chip number. + * + * This is called by the MTD layer to either select a given chip for the + * @mtd instance, or to indicate that the access has finished and the + * chip can be de-selected. + * + * The routine ensures that the nFCE line is correctly setup, and any + * platform specific selection code is called to route nFCE to the specific + * chip. + */ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) { struct s3c2410_nand_info *info; @@ -530,7 +583,16 @@ static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - readsl(info->regs + S3C2440_NFDATA, buf, len / 4); + + readsl(info->regs + S3C2440_NFDATA, buf, len >> 2); + + /* cleanup if we've got less than a word to do */ + if (len & 3) { + buf += len & ~3; + + for (; len & 3; len--) + *buf++ = readb(info->regs + S3C2440_NFDATA); + } } static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) @@ -542,7 +604,16 @@ static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); - writesl(info->regs + S3C2440_NFDATA, buf, len / 4); + + writesl(info->regs + S3C2440_NFDATA, buf, len >> 2); + + /* cleanup any fractional write */ + if (len & 3) { + buf += len & ~3; + + for (; len & 3; len--, buf++) + writeb(*buf, info->regs + S3C2440_NFDATA); + } } /* cpufreq driver support */ @@ -593,7 +664,7 @@ static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *inf /* device management functions */ -static int s3c2410_nand_remove(struct platform_device *pdev) +static int s3c24xx_nand_remove(struct platform_device *pdev) { struct s3c2410_nand_info *info = to_nand_info(pdev); @@ -645,17 +716,31 @@ static int s3c2410_nand_remove(struct platform_device *pdev) } #ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", NULL }; static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *mtd, struct s3c2410_nand_set *set) { + struct mtd_partition *part_info; + int nr_part = 0; + if (set == NULL) return add_mtd_device(&mtd->mtd); - if (set->nr_partitions > 0 && set->partitions != NULL) { - return add_mtd_partitions(&mtd->mtd, set->partitions, set->nr_partitions); + if (set->nr_partitions == 0) { + mtd->mtd.name = set->name; + nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, + &part_info, 0); + } else { + if (set->nr_partitions > 0 && set->partitions != NULL) { + nr_part = set->nr_partitions; + part_info = set->partitions; + } } + if (nr_part > 0 && part_info) + return add_mtd_partitions(&mtd->mtd, part_info, nr_part); + return add_mtd_device(&mtd->mtd); } #else @@ -667,11 +752,16 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, } #endif -/* s3c2410_nand_init_chip +/** + * s3c2410_nand_init_chip - initialise a single instance of an chip + * @info: The base NAND controller the chip is on. + * @nmtd: The new controller MTD instance to fill in. + * @set: The information passed from the board specific platform data. * - * init a single instance of an chip -*/ - + * Initialise the given @nmtd from the information in @info and @set. This + * readies the structure for use with the MTD layer functions by ensuring + * all pointers are setup and the necessary control routines selected. + */ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd, struct s3c2410_nand_set *set) @@ -757,14 +847,40 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, if (set->disable_ecc) chip->ecc.mode = NAND_ECC_NONE; + + switch (chip->ecc.mode) { + case NAND_ECC_NONE: + dev_info(info->device, "NAND ECC disabled\n"); + break; + case NAND_ECC_SOFT: + dev_info(info->device, "NAND soft ECC\n"); + break; + case NAND_ECC_HW: + dev_info(info->device, "NAND hardware ECC\n"); + break; + default: + dev_info(info->device, "NAND ECC UNKNOWN\n"); + break; + } + + /* If you use u-boot BBT creation code, specifying this flag will + * let the kernel fish out the BBT from the NAND, and also skip the + * full NAND scan that can take 1/2s or so. Little things... */ + if (set->flash_bbt) + chip->options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN; } -/* s3c2410_nand_update_chip +/** + * s3c2410_nand_update_chip - post probe update + * @info: The controller instance. + * @nmtd: The driver version of the MTD instance. * - * post-probe chip update, to change any items, such as the - * layout for large page nand - */ - + * This routine is called after the chip probe has succesfully completed + * and the relevant per-chip information updated. This call ensure that + * we update the internal state accordingly. + * + * The internal state is currently limited to the ECC state information. +*/ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *nmtd) { @@ -773,33 +889,33 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, dev_dbg(info->device, "chip %p => page shift %d\n", chip, chip->page_shift); - if (hardware_ecc) { + if (chip->ecc.mode != NAND_ECC_HW) + return; + /* change the behaviour depending on wether we are using * the large or small page nand device */ - if (chip->page_shift > 10) { - chip->ecc.size = 256; - chip->ecc.bytes = 3; - } else { - chip->ecc.size = 512; - chip->ecc.bytes = 3; - chip->ecc.layout = &nand_hw_eccoob; - } + if (chip->page_shift > 10) { + chip->ecc.size = 256; + chip->ecc.bytes = 3; + } else { + chip->ecc.size = 512; + chip->ecc.bytes = 3; + chip->ecc.layout = &nand_hw_eccoob; } } -/* s3c2410_nand_probe +/* s3c24xx_nand_probe * * called by device layer when it finds a device matching * one our driver can handled. This code checks to see if * it can allocate all necessary resources then calls the * nand layer to look for devices */ - -static int s3c24xx_nand_probe(struct platform_device *pdev, - enum s3c_cpu_type cpu_type) +static int s3c24xx_nand_probe(struct platform_device *pdev) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); + enum s3c_cpu_type cpu_type; struct s3c2410_nand_info *info; struct s3c2410_nand_mtd *nmtd; struct s3c2410_nand_set *sets; @@ -809,6 +925,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int nr_sets; int setno; + cpu_type = platform_get_device_id(pdev)->driver_data; + pr_debug("s3c2410_nand_probe(%p)\n", pdev); info = kmalloc(sizeof(*info), GFP_KERNEL); @@ -922,7 +1040,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, return 0; exit_error: - s3c2410_nand_remove(pdev); + s3c24xx_nand_remove(pdev); if (err == 0) err = -EINVAL; @@ -983,50 +1101,33 @@ static int s3c24xx_nand_resume(struct platform_device *dev) /* driver device registration */ -static int s3c2410_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2410); -} - -static int s3c2440_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2440); -} - -static int s3c2412_nand_probe(struct platform_device *dev) -{ - return s3c24xx_nand_probe(dev, TYPE_S3C2412); -} - -static struct platform_driver s3c2410_nand_driver = { - .probe = s3c2410_nand_probe, - .remove = s3c2410_nand_remove, - .suspend = s3c24xx_nand_suspend, - .resume = s3c24xx_nand_resume, - .driver = { - .name = "s3c2410-nand", - .owner = THIS_MODULE, +static struct platform_device_id s3c24xx_driver_ids[] = { + { + .name = "s3c2410-nand", + .driver_data = TYPE_S3C2410, + }, { + .name = "s3c2440-nand", + .driver_data = TYPE_S3C2440, + }, { + .name = "s3c2412-nand", + .driver_data = TYPE_S3C2412, + }, { + .name = "s3c6400-nand", + .driver_data = TYPE_S3C2412, /* compatible with 2412 */ }, + { } }; -static struct platform_driver s3c2440_nand_driver = { - .probe = s3c2440_nand_probe, - .remove = s3c2410_nand_remove, - .suspend = s3c24xx_nand_suspend, - .resume = s3c24xx_nand_resume, - .driver = { - .name = "s3c2440-nand", - .owner = THIS_MODULE, - }, -}; +MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); -static struct platform_driver s3c2412_nand_driver = { - .probe = s3c2412_nand_probe, - .remove = s3c2410_nand_remove, +static struct platform_driver s3c24xx_nand_driver = { + .probe = s3c24xx_nand_probe, + .remove = s3c24xx_nand_remove, .suspend = s3c24xx_nand_suspend, .resume = s3c24xx_nand_resume, + .id_table = s3c24xx_driver_ids, .driver = { - .name = "s3c2412-nand", + .name = "s3c24xx-nand", .owner = THIS_MODULE, }, }; @@ -1035,16 +1136,12 @@ static int __init s3c2410_nand_init(void) { printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n"); - platform_driver_register(&s3c2412_nand_driver); - platform_driver_register(&s3c2440_nand_driver); - return platform_driver_register(&s3c2410_nand_driver); + return platform_driver_register(&s3c24xx_nand_driver); } static void __exit s3c2410_nand_exit(void) { - platform_driver_unregister(&s3c2412_nand_driver); - platform_driver_unregister(&s3c2440_nand_driver); - platform_driver_unregister(&s3c2410_nand_driver); + platform_driver_unregister(&s3c24xx_nand_driver); } module_init(s3c2410_nand_init); @@ -1053,6 +1150,3 @@ module_exit(s3c2410_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_DESCRIPTION("S3C24XX MTD NAND driver"); -MODULE_ALIAS("platform:s3c2410-nand"); -MODULE_ALIAS("platform:s3c2412-nand"); -MODULE_ALIAS("platform:s3c2440-nand"); |
