summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/gpio.c')
-rw-r--r--drivers/mtd/nand/raw/gpio.c327
1 files changed, 327 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
new file mode 100644
index 0000000..2780af2
--- /dev/null
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -0,0 +1,327 @@
+/*
+ * Updated, and converted to generic GPIO based driver by Russell King.
+ *
+ * Written by Ben Dooks <ben@simtec.co.uk>
+ * Based on 2.4 version by Mark Whittaker
+ *
+ * © 2004 Simtec Electronics
+ *
+ * Device driver for NAND flash that uses a memory mapped interface to
+ * read/write the NAND commands and data, and GPIO pins for control signals
+ * (the DT binding refers to this as "GPIO assisted NAND flash")
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct gpiomtd {
+ void __iomem *io_sync;
+ struct nand_chip nand_chip;
+ struct gpio_nand_platdata plat;
+ struct gpio_desc *nce; /* Optional chip enable */
+ struct gpio_desc *cle;
+ struct gpio_desc *ale;
+ struct gpio_desc *rdy;
+ struct gpio_desc *nwp; /* Optional write protection */
+};
+
+static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd)
+{
+ return container_of(mtd_to_nand(mtd), struct gpiomtd, nand_chip);
+}
+
+
+#ifdef CONFIG_ARM
+/* gpio_nand_dosync()
+ *
+ * Make sure the GPIO state changes occur in-order with writes to NAND
+ * memory region.
+ * Needed on PXA due to bus-reordering within the SoC itself (see section on
+ * I/O ordering in PXA manual (section 2.3, p35)
+ */
+static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
+{
+ unsigned long tmp;
+
+ if (gpiomtd->io_sync) {
+ /*
+ * Linux memory barriers don't cater for what's required here.
+ * What's required is what's here - a read from a separate
+ * region with a dependency on that read.
+ */
+ tmp = readl(gpiomtd->io_sync);
+ asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
+ }
+}
+#else
+static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
+#endif
+
+static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+ gpio_nand_dosync(gpiomtd);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (gpiomtd->nce)
+ gpiod_set_value(gpiomtd->nce, !(ctrl & NAND_NCE));
+ gpiod_set_value(gpiomtd->cle, !!(ctrl & NAND_CLE));
+ gpiod_set_value(gpiomtd->ale, !!(ctrl & NAND_ALE));
+ gpio_nand_dosync(gpiomtd);
+ }
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
+ gpio_nand_dosync(gpiomtd);
+}
+
+static int gpio_nand_devready(struct mtd_info *mtd)
+{
+ struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+ return gpiod_get_value(gpiomtd->rdy);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_nand_id_table[] = {
+ { .compatible = "gpio-control-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
+
+static int gpio_nand_get_config_of(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ u32 val;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
+ if (val == 2) {
+ plat->options |= NAND_BUSWIDTH_16;
+ } else if (val != 1) {
+ dev_err(dev, "invalid bank-width %u\n", val);
+ return -EINVAL;
+ }
+ }
+
+ if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
+ plat->chip_delay = val;
+
+ return 0;
+}
+
+static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
+{
+ struct resource *r;
+ u64 addr;
+
+ if (of_property_read_u64(pdev->dev.of_node,
+ "gpio-control-nand,io-sync-reg", &addr))
+ return NULL;
+
+ r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return NULL;
+
+ r->start = addr;
+ r->end = r->start + 0x3;
+ r->flags = IORESOURCE_MEM;
+
+ return r;
+}
+#else /* CONFIG_OF */
+static inline int gpio_nand_get_config_of(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ return -ENOSYS;
+}
+
+static inline struct resource *
+gpio_nand_get_io_sync_of(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
+static inline int gpio_nand_get_config(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ int ret = gpio_nand_get_config_of(dev, plat);
+
+ if (!ret)
+ return ret;
+
+ if (dev_get_platdata(dev)) {
+ memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline struct resource *
+gpio_nand_get_io_sync(struct platform_device *pdev)
+{
+ struct resource *r = gpio_nand_get_io_sync_of(pdev);
+
+ if (r)
+ return r;
+
+ return platform_get_resource(pdev, IORESOURCE_MEM, 1);
+}
+
+static int gpio_nand_remove(struct platform_device *pdev)
+{
+ struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
+
+ nand_release(nand_to_mtd(&gpiomtd->nand_chip));
+
+ /* Enable write protection and disable the chip */
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_set_value(gpiomtd->nwp, 0);
+ if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+ gpiod_set_value(gpiomtd->nce, 0);
+
+ return 0;
+}
+
+static int gpio_nand_probe(struct platform_device *pdev)
+{
+ struct gpiomtd *gpiomtd;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ int ret = 0;
+
+ if (!dev->of_node && !dev_get_platdata(dev))
+ return -EINVAL;
+
+ gpiomtd = devm_kzalloc(dev, sizeof(*gpiomtd), GFP_KERNEL);
+ if (!gpiomtd)
+ return -ENOMEM;
+
+ chip = &gpiomtd->nand_chip;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ chip->IO_ADDR_R = devm_ioremap_resource(dev, res);
+ if (IS_ERR(chip->IO_ADDR_R))
+ return PTR_ERR(chip->IO_ADDR_R);
+
+ res = gpio_nand_get_io_sync(pdev);
+ if (res) {
+ gpiomtd->io_sync = devm_ioremap_resource(dev, res);
+ if (IS_ERR(gpiomtd->io_sync))
+ return PTR_ERR(gpiomtd->io_sync);
+ }
+
+ ret = gpio_nand_get_config(dev, &gpiomtd->plat);
+ if (ret)
+ return ret;
+
+ /* Just enable the chip */
+ gpiomtd->nce = devm_gpiod_get_optional(dev, "nce", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiomtd->nce))
+ return PTR_ERR(gpiomtd->nce);
+
+ /* We disable write protection once we know probe() will succeed */
+ gpiomtd->nwp = devm_gpiod_get_optional(dev, "nwp", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->nwp)) {
+ ret = PTR_ERR(gpiomtd->nwp);
+ goto out_ce;
+ }
+
+ gpiomtd->ale = devm_gpiod_get(dev, "ale", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->ale)) {
+ ret = PTR_ERR(gpiomtd->ale);
+ goto out_ce;
+ }
+
+ gpiomtd->cle = devm_gpiod_get(dev, "cle", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiomtd->cle)) {
+ ret = PTR_ERR(gpiomtd->cle);
+ goto out_ce;
+ }
+
+ gpiomtd->rdy = devm_gpiod_get_optional(dev, "rdy", GPIOD_IN);
+ if (IS_ERR(gpiomtd->rdy)) {
+ ret = PTR_ERR(gpiomtd->rdy);
+ goto out_ce;
+ }
+ /* Using RDY pin */
+ if (gpiomtd->rdy)
+ chip->dev_ready = gpio_nand_devready;
+
+ nand_set_flash_node(chip, pdev->dev.of_node);
+ chip->IO_ADDR_W = chip->IO_ADDR_R;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->options = gpiomtd->plat.options;
+ chip->chip_delay = gpiomtd->plat.chip_delay;
+ chip->cmd_ctrl = gpio_nand_cmd_ctrl;
+
+ mtd = nand_to_mtd(chip);
+ mtd->dev.parent = dev;
+
+ platform_set_drvdata(pdev, gpiomtd);
+
+ /* Disable write protection, if wired up */
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_direction_output(gpiomtd->nwp, 1);
+
+ ret = nand_scan(mtd, 1);
+ if (ret)
+ goto err_wp;
+
+ if (gpiomtd->plat.adjust_parts)
+ gpiomtd->plat.adjust_parts(&gpiomtd->plat, mtd->size);
+
+ ret = mtd_device_register(mtd, gpiomtd->plat.parts,
+ gpiomtd->plat.num_parts);
+ if (!ret)
+ return 0;
+
+err_wp:
+ if (gpiomtd->nwp && !IS_ERR(gpiomtd->nwp))
+ gpiod_set_value(gpiomtd->nwp, 0);
+out_ce:
+ if (gpiomtd->nce && !IS_ERR(gpiomtd->nce))
+ gpiod_set_value(gpiomtd->nce, 0);
+
+ return ret;
+}
+
+static struct platform_driver gpio_nand_driver = {
+ .probe = gpio_nand_probe,
+ .remove = gpio_nand_remove,
+ .driver = {
+ .name = "gpio-nand",
+ .of_match_table = of_match_ptr(gpio_nand_id_table),
+ },
+};
+
+module_platform_driver(gpio_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("GPIO NAND Driver");
OpenPOWER on IntegriCloud