diff options
Diffstat (limited to 'drivers/mtd/nand/h1910.c')
| -rw-r--r-- | drivers/mtd/nand/h1910.c | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c deleted file mode 100644 index 50166e9..0000000 --- a/drivers/mtd/nand/h1910.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * drivers/mtd/nand/h1910.c - * - * Copyright (C) 2003 Joshua Wise (joshua@joshuawise.com) - * - * Derived from drivers/mtd/nand/edb7312.c - * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) - * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Overview: - * This is a device driver for the NAND flash device found on the - * iPAQ h1910 board which utilizes the Samsung K9F2808 part. This is - * a 128Mibit (16MiB x 8 bits) NAND flash device. - */ - -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <asm/io.h> -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <mach/h1900-gpio.h> -#include <mach/ipaq.h> - -/* - * MTD structure for EDB7312 board - */ -static struct mtd_info *h1910_nand_mtd = NULL; - -/* - * Module stuff - */ - -/* - * Define static partitions for flash device - */ -static struct mtd_partition partition_info[] = { - {name:"h1910 NAND Flash", - offset:0, - size:16 * 1024 * 1024} -}; - -#define NUM_PARTITIONS 1 - -/* - * hardware specific access to control-lines - * - * NAND_NCE: bit 0 - don't care - * NAND_CLE: bit 1 - address bit 2 - * NAND_ALE: bit 2 - address bit 3 - */ -static void h1910_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1)); -} - -/* - * read device ready pin - */ -#if 0 -static int h1910_device_ready(struct mtd_info *mtd) -{ - return (GPLR(55) & GPIO_bit(55)); -} -#endif - -/* - * Main initialization routine - */ -static int __init h1910_init(void) -{ - struct nand_chip *this; - void __iomem *nandaddr; - - if (!machine_is_h1900()) - return -ENODEV; - - nandaddr = ioremap(0x08000000, 0x1000); - if (!nandaddr) { - printk("Failed to ioremap nand flash.\n"); - return -ENOMEM; - } - - /* Allocate memory for MTD device structure and private data */ - h1910_nand_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); - if (!h1910_nand_mtd) { - printk("Unable to allocate h1910 NAND MTD device structure.\n"); - iounmap((void *)nandaddr); - return -ENOMEM; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&h1910_nand_mtd[1]); - - /* Initialize structures */ - memset(h1910_nand_mtd, 0, sizeof(struct mtd_info)); - memset(this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - h1910_nand_mtd->priv = this; - h1910_nand_mtd->owner = THIS_MODULE; - - /* - * Enable VPEN - */ - GPSR(37) = GPIO_bit(37); - - /* insert callbacks */ - this->IO_ADDR_R = nandaddr; - this->IO_ADDR_W = nandaddr; - this->cmd_ctrl = h1910_hwcontrol; - this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ - /* 15 us command delay time */ - this->chip_delay = 50; - this->ecc.mode = NAND_ECC_SOFT; - - /* Scan to find existence of the device */ - if (nand_scan(h1910_nand_mtd, 1)) { - printk(KERN_NOTICE "No NAND device - returning -ENXIO\n"); - kfree(h1910_nand_mtd); - iounmap((void *)nandaddr); - return -ENXIO; - } - - /* Register the partitions */ - mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info, - NUM_PARTITIONS); - - /* Return happy */ - return 0; -} - -module_init(h1910_init); - -/* - * Clean up routine - */ -static void __exit h1910_cleanup(void) -{ - struct nand_chip *this = (struct nand_chip *)&h1910_nand_mtd[1]; - - /* Release resources, unregister device */ - nand_release(h1910_nand_mtd); - - /* Release io resource */ - iounmap((void *)this->IO_ADDR_W); - - /* Free the MTD device structure */ - kfree(h1910_nand_mtd); -} - -module_exit(h1910_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Joshua Wise <joshua at joshuawise dot com>"); -MODULE_DESCRIPTION("NAND flash driver for iPAQ h1910"); |
