diff options
Diffstat (limited to 'drivers/mtd/nand/fsmc_nand.c')
-rw-r--r-- | drivers/mtd/nand/fsmc_nand.c | 236 |
1 files changed, 66 insertions, 170 deletions
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index bda1e46..cea50d2 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -38,15 +38,6 @@ #include <linux/amba/bus.h> #include <mtd/mtd-abi.h> -#define FSMC_NAND_BW8 1 -#define FSMC_NAND_BW16 2 - -#define FSMC_MAX_NOR_BANKS 4 -#define FSMC_MAX_NAND_BANKS 4 - -#define FSMC_FLASH_WIDTH8 1 -#define FSMC_FLASH_WIDTH16 2 - /* fsmc controller registers for NOR flash */ #define CTRL 0x0 /* ctrl register definitions */ @@ -133,33 +124,48 @@ enum access_mode { }; /** - * fsmc_nand_platform_data - platform specific NAND controller config - * @nand_timings: timing setup for the physical NAND interface - * @partitions: partition table for the platform, use a default fallback - * if this is NULL - * @nr_partitions: the number of partitions in the previous entry - * @options: different options for the driver - * @width: bus width - * @bank: default bank - * @select_bank: callback to select a certain bank, this is - * platform-specific. If the controller only supports one bank - * this may be set to NULL + * struct fsmc_nand_data - structure for FSMC NAND device state + * + * @pid: Part ID on the AMBA PrimeCell format + * @mtd: MTD info for a NAND flash. + * @nand: Chip related info for a NAND flash. + * @partitions: Partition info for a NAND Flash. + * @nr_partitions: Total number of partition of a NAND flash. + * + * @bank: Bank number for probed device. + * @clk: Clock structure for FSMC. + * + * @read_dma_chan: DMA channel for read access + * @write_dma_chan: DMA channel for write access to NAND + * @dma_access_complete: Completion structure + * + * @data_pa: NAND Physical port for Data. + * @data_va: NAND port for Data. + * @cmd_va: NAND port for Command. + * @addr_va: NAND port for Address. + * @regs_va: FSMC regs base address. */ -struct fsmc_nand_platform_data { - struct fsmc_nand_timings *nand_timings; - struct mtd_partition *partitions; - unsigned int nr_partitions; - unsigned int options; - unsigned int width; - unsigned int bank; +struct fsmc_nand_data { + u32 pid; + struct nand_chip nand; + unsigned int bank; + struct device *dev; enum access_mode mode; + struct clk *clk; - void (*select_bank)(uint32_t bank, uint32_t busw); + /* DMA related objects */ + struct dma_chan *read_dma_chan; + struct dma_chan *write_dma_chan; + struct completion dma_access_complete; - /* priv structures for dma accesses */ - void *read_dma_priv; - void *write_dma_priv; + struct fsmc_nand_timings *dev_timings; + + dma_addr_t data_pa; + void __iomem *data_va; + void __iomem *cmd_va; + void __iomem *addr_va; + void __iomem *regs_va; }; static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section, @@ -246,86 +252,11 @@ static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = { .free = fsmc_ecc4_ooblayout_free, }; -/** - * struct fsmc_nand_data - structure for FSMC NAND device state - * - * @pid: Part ID on the AMBA PrimeCell format - * @mtd: MTD info for a NAND flash. - * @nand: Chip related info for a NAND flash. - * @partitions: Partition info for a NAND Flash. - * @nr_partitions: Total number of partition of a NAND flash. - * - * @bank: Bank number for probed device. - * @clk: Clock structure for FSMC. - * - * @read_dma_chan: DMA channel for read access - * @write_dma_chan: DMA channel for write access to NAND - * @dma_access_complete: Completion structure - * - * @data_pa: NAND Physical port for Data. - * @data_va: NAND port for Data. - * @cmd_va: NAND port for Command. - * @addr_va: NAND port for Address. - * @regs_va: FSMC regs base address. - */ -struct fsmc_nand_data { - u32 pid; - struct nand_chip nand; - struct mtd_partition *partitions; - unsigned int nr_partitions; - - unsigned int bank; - struct device *dev; - enum access_mode mode; - struct clk *clk; - - /* DMA related objects */ - struct dma_chan *read_dma_chan; - struct dma_chan *write_dma_chan; - struct completion dma_access_complete; - - struct fsmc_nand_timings *dev_timings; - - dma_addr_t data_pa; - void __iomem *data_va; - void __iomem *cmd_va; - void __iomem *addr_va; - void __iomem *regs_va; - - void (*select_chip)(uint32_t bank, uint32_t busw); -}; - static inline struct fsmc_nand_data *mtd_to_fsmc(struct mtd_info *mtd) { return container_of(mtd_to_nand(mtd), struct fsmc_nand_data, nand); } -/* Assert CS signal based on chipnr */ -static void fsmc_select_chip(struct mtd_info *mtd, int chipnr) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct fsmc_nand_data *host; - - host = mtd_to_fsmc(mtd); - - switch (chipnr) { - case -1: - chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); - break; - case 0: - case 1: - case 2: - case 3: - if (host->select_chip) - host->select_chip(chipnr, - chip->options & NAND_BUSWIDTH_16); - break; - - default: - dev_err(host->dev, "unsupported chip-select %d\n", chipnr); - } -} - /* * fsmc_cmd_ctrl - For facilitaing Hardware access * This routine allows hardware specific access to control-lines(ALE,CLE) @@ -838,44 +769,46 @@ static bool filter(struct dma_chan *chan, void *slave) } static int fsmc_nand_probe_config_dt(struct platform_device *pdev, - struct device_node *np) + struct fsmc_nand_data *host, + struct nand_chip *nand) { - struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; u32 val; int ret; - /* Set default NAND width to 8 bits */ - pdata->width = 8; + nand->options = 0; + if (!of_property_read_u32(np, "bank-width", &val)) { if (val == 2) { - pdata->width = 16; + nand->options |= NAND_BUSWIDTH_16; } else if (val != 1) { dev_err(&pdev->dev, "invalid bank-width %u\n", val); return -EINVAL; } } + if (of_get_property(np, "nand-skip-bbtscan", NULL)) - pdata->options = NAND_SKIP_BBTSCAN; + nand->options |= NAND_SKIP_BBTSCAN; - pdata->nand_timings = devm_kzalloc(&pdev->dev, - sizeof(*pdata->nand_timings), GFP_KERNEL); - if (!pdata->nand_timings) + host->dev_timings = devm_kzalloc(&pdev->dev, + sizeof(*host->dev_timings), GFP_KERNEL); + if (!host->dev_timings) return -ENOMEM; - ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings, - sizeof(*pdata->nand_timings)); + ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings, + sizeof(*host->dev_timings)); if (ret) { dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n"); - pdata->nand_timings = NULL; + host->dev_timings = NULL; } /* Set default NAND bank to 0 */ - pdata->bank = 0; + host->bank = 0; if (!of_property_read_u32(np, "bank", &val)) { if (val > 3) { dev_err(&pdev->dev, "invalid bank %u\n", val); return -EINVAL; } - pdata->bank = val; + host->bank = val; } return 0; } @@ -886,8 +819,6 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, */ static int __init fsmc_nand_probe(struct platform_device *pdev) { - struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); - struct device_node __maybe_unused *np = pdev->dev.of_node; struct fsmc_nand_data *host; struct mtd_info *mtd; struct nand_chip *nand; @@ -897,22 +828,17 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) u32 pid; int i; - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - pdev->dev.platform_data = pdata; - ret = fsmc_nand_probe_config_dt(pdev, np); - if (ret) { - dev_err(&pdev->dev, "no platform data\n"); - return -ENODEV; - } - /* Allocate memory for the device structure (and zero it) */ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); if (!host) return -ENOMEM; + nand = &host->nand; + + ret = fsmc_nand_probe_config_dt(pdev, host, nand); + if (ret) + return ret; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); host->data_va = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(host->data_va)) @@ -935,7 +861,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (IS_ERR(host->regs_va)) return PTR_ERR(host->regs_va); - host->clk = clk_get(&pdev->dev, NULL); + host->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "failed to fetch block clock\n"); return PTR_ERR(host->clk); @@ -943,7 +869,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) ret = clk_prepare_enable(host->clk); if (ret) - goto err_clk_prepare_enable; + return ret; /* * This device ID is actually a common AMBA ID as used on the @@ -957,22 +883,15 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid), AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid)); - host->bank = pdata->bank; - host->select_chip = pdata->select_bank; - host->partitions = pdata->partitions; - host->nr_partitions = pdata->nr_partitions; host->dev = &pdev->dev; - host->dev_timings = pdata->nand_timings; - host->mode = pdata->mode; if (host->mode == USE_DMA_ACCESS) init_completion(&host->dma_access_complete); /* Link all private pointers */ mtd = nand_to_mtd(&host->nand); - nand = &host->nand; nand_set_controller_data(nand, host); - nand_set_flash_node(nand, np); + nand_set_flash_node(nand, pdev->dev.of_node); mtd->dev.parent = &pdev->dev; nand->IO_ADDR_R = host->data_va; @@ -987,26 +906,18 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) nand->ecc.mode = NAND_ECC_HW; nand->ecc.hwctl = fsmc_enable_hwecc; nand->ecc.size = 512; - nand->options = pdata->options; - nand->select_chip = fsmc_select_chip; nand->badblockbits = 7; - nand_set_flash_node(nand, np); - - if (pdata->width == FSMC_NAND_BW16) - nand->options |= NAND_BUSWIDTH_16; switch (host->mode) { case USE_DMA_ACCESS: dma_cap_zero(mask); dma_cap_set(DMA_MEMCPY, mask); - host->read_dma_chan = dma_request_channel(mask, filter, - pdata->read_dma_priv); + host->read_dma_chan = dma_request_channel(mask, filter, NULL); if (!host->read_dma_chan) { dev_err(&pdev->dev, "Unable to get read dma channel\n"); goto err_req_read_chnl; } - host->write_dma_chan = dma_request_channel(mask, filter, - pdata->write_dma_priv); + host->write_dma_chan = dma_request_channel(mask, filter, NULL); if (!host->write_dma_chan) { dev_err(&pdev->dev, "Unable to get write dma channel\n"); goto err_req_write_chnl; @@ -1107,18 +1018,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (ret) goto err_probe; - /* - * The partition information can is accessed by (in the same precedence) - * - * command line through Bootloader, - * platform data, - * default partition information present in driver. - */ - /* - * Check for partition info passed - */ mtd->name = "nand"; - ret = mtd_device_register(mtd, host->partitions, host->nr_partitions); + ret = mtd_device_register(mtd, NULL, 0); if (ret) goto err_probe; @@ -1135,8 +1036,6 @@ err_req_write_chnl: dma_release_channel(host->read_dma_chan); err_req_read_chnl: clk_disable_unprepare(host->clk); -err_clk_prepare_enable: - clk_put(host->clk); return ret; } @@ -1155,7 +1054,6 @@ static int fsmc_nand_remove(struct platform_device *pdev) dma_release_channel(host->read_dma_chan); } clk_disable_unprepare(host->clk); - clk_put(host->clk); } return 0; @@ -1185,20 +1083,18 @@ static int fsmc_nand_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume); -#ifdef CONFIG_OF static const struct of_device_id fsmc_nand_id_table[] = { { .compatible = "st,spear600-fsmc-nand" }, { .compatible = "stericsson,fsmc-nand" }, {} }; MODULE_DEVICE_TABLE(of, fsmc_nand_id_table); -#endif static struct platform_driver fsmc_nand_driver = { .remove = fsmc_nand_remove, .driver = { .name = "fsmc-nand", - .of_match_table = of_match_ptr(fsmc_nand_id_table), + .of_match_table = fsmc_nand_id_table, .pm = &fsmc_nand_pm_ops, }, }; |