summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig9
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/atmel-mci-regs.h7
-rw-r--r--drivers/mmc/host/atmel-mci.c113
-rw-r--r--drivers/mmc/host/bfin_sdh.c210
-rw-r--r--drivers/mmc/host/davinci_mmc.c271
-rw-r--r--drivers/mmc/host/dw_mmc-exynos.c253
-rw-r--r--drivers/mmc/host/dw_mmc-pci.c15
-rw-r--r--drivers/mmc/host/dw_mmc-pltfm.c62
-rw-r--r--drivers/mmc/host/dw_mmc-pltfm.h20
-rw-r--r--drivers/mmc/host/dw_mmc.c326
-rw-r--r--drivers/mmc/host/dw_mmc.h24
-rw-r--r--drivers/mmc/host/mmc_spi.c15
-rw-r--r--drivers/mmc/host/mmci.c13
-rw-r--r--drivers/mmc/host/mxcmmc.c76
-rw-r--r--drivers/mmc/host/mxs-mmc.c2
-rw-r--r--drivers/mmc/host/omap.c37
-rw-r--r--drivers/mmc/host/omap_hsmmc.c125
-rw-r--r--drivers/mmc/host/pxamci.c52
-rw-r--r--drivers/mmc/host/sdhci-dove.c8
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c36
-rw-r--r--drivers/mmc/host/sdhci-pci.c19
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c3
-rw-r--r--drivers/mmc/host/sdhci-pxav2.c6
-rw-r--r--drivers/mmc/host/sdhci-pxav3.c35
-rw-r--r--drivers/mmc/host/sdhci-s3c.c216
-rw-r--r--drivers/mmc/host/sdhci-spear.c67
-rw-r--r--drivers/mmc/host/sdhci-tegra.c8
-rw-r--r--drivers/mmc/host/sdhci.c205
-rw-r--r--drivers/mmc/host/sh_mmcif.c8
-rw-r--r--drivers/mmc/host/via-sdmmc.c16
-rw-r--r--drivers/mmc/host/vub300.c4
32 files changed, 1587 insertions, 675 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index aa131b3..9bf10e7 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -540,6 +540,15 @@ config MMC_DW_PLTFM
If unsure, say Y.
+config MMC_DW_EXYNOS
+ tristate "Exynos specific extentions for Synopsys DW Memory Card Interface"
+ depends on MMC_DW
+ select MMC_DW_PLTFM
+ help
+ This selects support for Samsung Exynos SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Exynos4 and Exynos5 SoC's.
+
config MMC_DW_PCI
tristate "Synopsys Designware MCI support on PCI bus"
depends on MMC_DW && PCI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 8922b06..17ad0a7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o
obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o
obj-$(CONFIG_MMC_DW) += dw_mmc.o
obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
+obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index ab56f7d..c97001e 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -140,6 +140,13 @@
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + reg)
+/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
+#ifdef CONFIG_AVR32
+# define ATMCI_PDC_CONNECTED 0
+#else
+# define ATMCI_PDC_CONNECTED 1
+#endif
+
/*
* Fix sconfig's burst size according to atmel MCI. We need to convert them as:
* 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 852d5fb..ddf096e 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -19,6 +19,9 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/seq_file.h>
@@ -71,7 +74,7 @@ enum atmci_pdc_buf {
};
struct atmel_mci_caps {
- bool has_dma;
+ bool has_dma_conf_reg;
bool has_pdc;
bool has_cfg_reg;
bool has_cstor_reg;
@@ -418,7 +421,7 @@ static int atmci_regs_show(struct seq_file *s, void *v)
atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
- if (host->caps.has_dma) {
+ if (host->caps.has_dma_conf_reg) {
u32 val;
val = buf[ATMCI_DMA / 4];
@@ -500,6 +503,70 @@ err:
dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
}
+#if defined(CONFIG_OF)
+static const struct of_device_id atmci_dt_ids[] = {
+ { .compatible = "atmel,hsmci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmci_dt_ids);
+
+static struct mci_platform_data __devinit*
+atmci_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *cnp;
+ struct mci_platform_data *pdata;
+ u32 slot_id;
+
+ if (!np) {
+ dev_err(&pdev->dev, "device node not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for_each_child_of_node(np, cnp) {
+ if (of_property_read_u32(cnp, "reg", &slot_id)) {
+ dev_warn(&pdev->dev, "reg property is missing for %s\n",
+ cnp->full_name);
+ continue;
+ }
+
+ if (slot_id >= ATMCI_MAX_NR_SLOTS) {
+ dev_warn(&pdev->dev, "can't have more than %d slots\n",
+ ATMCI_MAX_NR_SLOTS);
+ break;
+ }
+
+ if (of_property_read_u32(cnp, "bus-width",
+ &pdata->slot[slot_id].bus_width))
+ pdata->slot[slot_id].bus_width = 1;
+
+ pdata->slot[slot_id].detect_pin =
+ of_get_named_gpio(cnp, "cd-gpios", 0);
+
+ pdata->slot[slot_id].detect_is_active_high =
+ of_property_read_bool(cnp, "cd-inverted");
+
+ pdata->slot[slot_id].wp_pin =
+ of_get_named_gpio(cnp, "wp-gpios", 0);
+ }
+
+ return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct mci_platform_data*
+atmci_of_init(struct platform_device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
static inline unsigned int atmci_get_version(struct atmel_mci *host)
{
return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
@@ -774,7 +841,7 @@ static void atmci_dma_complete(void *arg)
dev_vdbg(&host->pdev->dev, "DMA complete\n");
- if (host->caps.has_dma)
+ if (host->caps.has_dma_conf_reg)
/* Disable DMA hardware handshaking on MCI */
atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
@@ -961,7 +1028,9 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
}
- atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+ if (host->caps.has_dma_conf_reg)
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) |
+ ATMCI_DMAEN);
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
@@ -2046,6 +2115,13 @@ static int __init atmci_init_slot(struct atmel_mci *host,
slot->sdc_reg = sdc_reg;
slot->sdio_irq = sdio_irq;
+ dev_dbg(&mmc->class_dev,
+ "slot[%u]: bus_width=%u, detect_pin=%d, "
+ "detect_is_active_high=%s, wp_pin=%d\n",
+ id, slot_data->bus_width, slot_data->detect_pin,
+ slot_data->detect_is_active_high ? "true" : "false",
+ slot_data->wp_pin);
+
mmc->ops = &atmci_ops;
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
mmc->f_max = host->bus_hz / 2;
@@ -2169,7 +2245,10 @@ static bool atmci_configure_dma(struct atmel_mci *host)
pdata = host->pdev->dev.platform_data;
- if (pdata && find_slave_dev(pdata->dma_slave)) {
+ if (!pdata)
+ return false;
+
+ if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) {
dma_cap_mask_t mask;
/* Try to grab a DMA channel */
@@ -2210,8 +2289,8 @@ static void __init atmci_get_cap(struct atmel_mci *host)
dev_info(&host->pdev->dev,
"version: 0x%x\n", version);
- host->caps.has_dma = 0;
- host->caps.has_pdc = 1;
+ host->caps.has_dma_conf_reg = 0;
+ host->caps.has_pdc = ATMCI_PDC_CONNECTED;
host->caps.has_cfg_reg = 0;
host->caps.has_cstor_reg = 0;
host->caps.has_highspeed = 0;
@@ -2228,12 +2307,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
host->caps.has_odd_clk_div = 1;
case 0x400:
case 0x300:
-#ifdef CONFIG_AT_HDMAC
- host->caps.has_dma = 1;
-#else
- dev_info(&host->pdev->dev,
- "has dma capability but dma engine is not selected, then use pio\n");
-#endif
+ host->caps.has_dma_conf_reg = 1;
host->caps.has_pdc = 0;
host->caps.has_cfg_reg = 1;
host->caps.has_cstor_reg = 1;
@@ -2268,8 +2342,14 @@ static int __init atmci_probe(struct platform_device *pdev)
if (!regs)
return -ENXIO;
pdata = pdev->dev.platform_data;
- if (!pdata)
- return -ENXIO;
+ if (!pdata) {
+ pdata = atmci_of_init(pdev);
+ if (IS_ERR(pdata)) {
+ dev_err(&pdev->dev, "platform data not available\n");
+ return PTR_ERR(pdata);
+ }
+ }
+
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
@@ -2308,7 +2388,7 @@ static int __init atmci_probe(struct platform_device *pdev)
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (host->caps.has_dma && atmci_configure_dma(host)) {
+ if (atmci_configure_dma(host)) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
@@ -2487,6 +2567,7 @@ static struct platform_driver atmci_driver = {
.driver = {
.name = "atmel_mci",
.pm = ATMCI_PM_OPS,
+ .of_match_table = of_match_ptr(atmci_dt_ids),
},
};
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index a17dd73..b9b463e 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -24,9 +24,7 @@
#include <asm/portmux.h>
#include <asm/bfin_sdh.h>
-#if defined(CONFIG_BF51x)
-#define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL
-#define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL
+#if defined(CONFIG_BF51x) || defined(__ADSPBF60x__)
#define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CTL
#define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CTL
#define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT
@@ -45,8 +43,16 @@
#define bfin_write_SDH_E_STATUS bfin_write_RSI_E_STATUS
#define bfin_read_SDH_STATUS bfin_read_RSI_STATUS
#define bfin_write_SDH_MASK0 bfin_write_RSI_MASK0
+#define bfin_write_SDH_E_MASK bfin_write_RSI_E_MASK
#define bfin_read_SDH_CFG bfin_read_RSI_CFG
#define bfin_write_SDH_CFG bfin_write_RSI_CFG
+# if defined(__ADSPBF60x__)
+# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ
+# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ
+# else
+# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CTL
+# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CTL
+# endif
#endif
struct sdh_host {
@@ -62,6 +68,7 @@ struct sdh_host {
dma_addr_t sg_dma;
int dma_len;
+ unsigned long sclk;
unsigned int imask;
unsigned int power_mode;
unsigned int clk_div;
@@ -127,11 +134,15 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
/* Only supports power-of-2 block size */
if (data->blksz & (data->blksz - 1))
return -EINVAL;
+#ifndef RSI_BLKSZ
data_ctl |= ((ffs(data->blksz) - 1) << 4);
+#else
+ bfin_write_SDH_BLK_SIZE(data->blksz);
+#endif
bfin_write_SDH_DATA_CTL(data_ctl);
/* the time of a host clock period in ns */
- cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1)));
+ cycle_ns = 1000000000 / (host->sclk / (2 * (host->clk_div + 1)));
timeout = data->timeout_ns / cycle_ns;
timeout += data->timeout_clks;
bfin_write_SDH_DATA_TIMER(timeout);
@@ -145,8 +156,13 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
sdh_enable_stat_irq(host, (DAT_CRC_FAIL | DAT_TIME_OUT | DAT_END));
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir);
-#if defined(CONFIG_BF54x)
- dma_cfg |= DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_32 | DMAEN;
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
+ dma_cfg |= DMAFLOW_ARRAY | RESTART | WDSIZE_32 | DMAEN;
+# ifdef RSI_BLKSZ
+ dma_cfg |= PSIZE_32 | NDSIZE_3;
+# else
+ dma_cfg |= NDSIZE_5;
+# endif
{
struct scatterlist *sg;
int i;
@@ -156,7 +172,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
host->sg_cpu[i].x_modify = 4;
dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
- "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
+ "cfg:0x%lx, x_count:0x%lx, x_modify:0x%lx\n",
i, host->sg_cpu[i].start_addr,
host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
host->sg_cpu[i].x_modify);
@@ -172,6 +188,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
set_dma_curr_desc_addr(host->dma_ch, (unsigned long *)host->sg_dma);
set_dma_x_count(host->dma_ch, 0);
set_dma_x_modify(host->dma_ch, 0);
+ SSYNC();
set_dma_config(host->dma_ch, dma_cfg);
#elif defined(CONFIG_BF51x)
/* RSI DMA doesn't work in array mode */
@@ -179,6 +196,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
set_dma_start_addr(host->dma_ch, sg_dma_address(&data->sg[0]));
set_dma_x_count(host->dma_ch, length / 4);
set_dma_x_modify(host->dma_ch, 4);
+ SSYNC();
set_dma_config(host->dma_ch, dma_cfg);
#endif
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
@@ -296,7 +314,6 @@ static int sdh_data_done(struct sdh_host *host, unsigned int stat)
else
data->bytes_xfered = 0;
- sdh_disable_stat_irq(host, DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN);
bfin_write_SDH_STATUS_CLR(DAT_END_STAT | DAT_TIMEOUT_STAT | \
DAT_CRC_FAIL_STAT | DAT_BLK_END_STAT | RX_OVERRUN | TX_UNDERRUN);
bfin_write_SDH_DATA_CTL(0);
@@ -321,74 +338,115 @@ static void sdh_request(struct mmc_host *mmc, struct mmc_request *mrq)
dev_dbg(mmc_dev(host->mmc), "%s enter, mrp:%p, cmd:%p\n", __func__, mrq, mrq->cmd);
WARN_ON(host->mrq != NULL);
+ spin_lock(&host->lock);
host->mrq = mrq;
host->data = mrq->data;
if (mrq->data && mrq->data->flags & MMC_DATA_READ) {
ret = sdh_setup_data(host, mrq->data);
if (ret)
- return;
+ goto data_err;
}
sdh_start_cmd(host, mrq->cmd);
+data_err:
+ spin_unlock(&host->lock);
}
static void sdh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdh_host *host;
- unsigned long flags;
u16 clk_ctl = 0;
+#ifndef RSI_BLKSZ
u16 pwr_ctl = 0;
+#endif
u16 cfg;
host = mmc_priv(mmc);
- spin_lock_irqsave(&host->lock, flags);
- if (ios->clock) {
- unsigned long sys_clk, ios_clk;
- unsigned char clk_div;
- ios_clk = 2 * ios->clock;
- sys_clk = get_sclk();
- clk_div = sys_clk / ios_clk;
- if (sys_clk % ios_clk == 0)
- clk_div -= 1;
- clk_div = min_t(unsigned char, clk_div, 0xFF);
- clk_ctl |= clk_div;
- clk_ctl |= CLK_E;
- host->clk_div = clk_div;
- } else
- sdh_stop_clock(host);
-
- if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
-#ifdef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
- pwr_ctl |= ROD_CTL;
-#else
- pwr_ctl |= SD_CMD_OD | ROD_CTL;
-#endif
+ spin_lock(&host->lock);
- if (ios->bus_width == MMC_BUS_WIDTH_4) {
- cfg = bfin_read_SDH_CFG();
+ cfg = bfin_read_SDH_CFG();
+ cfg |= MWE;
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_4:
+#ifndef RSI_BLKSZ
cfg &= ~PD_SDDAT3;
+#endif
cfg |= PUP_SDDAT3;
/* Enable 4 bit SDIO */
- cfg |= (SD4E | MWE);
- bfin_write_SDH_CFG(cfg);
- clk_ctl |= WIDE_BUS;
- } else {
- cfg = bfin_read_SDH_CFG();
- cfg |= MWE;
- bfin_write_SDH_CFG(cfg);
+ cfg |= SD4E;
+ clk_ctl |= WIDE_BUS_4;
+ break;
+ case MMC_BUS_WIDTH_8:
+#ifndef RSI_BLKSZ
+ cfg &= ~PD_SDDAT3;
+#endif
+ cfg |= PUP_SDDAT3;
+ /* Disable 4 bit SDIO */
+ cfg &= ~SD4E;
+ clk_ctl |= BYTE_BUS_8;
+ break;
+ default:
+ cfg &= ~PUP_SDDAT3;
+ /* Disable 4 bit SDIO */
+ cfg &= ~SD4E;
}
- bfin_write_SDH_CLK_CTL(clk_ctl);
-
host->power_mode = ios->power_mode;
- if (ios->power_mode == MMC_POWER_ON)
+#ifndef RSI_BLKSZ
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
+ pwr_ctl |= ROD_CTL;
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ pwr_ctl |= SD_CMD_OD;
+# endif
+ }
+
+ if (ios->power_mode != MMC_POWER_OFF)
pwr_ctl |= PWR_ON;
+ else
+ pwr_ctl &= ~PWR_ON;
bfin_write_SDH_PWR_CTL(pwr_ctl);
+#else
+# ifndef CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
+ if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cfg |= SD_CMD_OD;
+ else
+ cfg &= ~SD_CMD_OD;
+# endif
+
+
+ if (ios->power_mode != MMC_POWER_OFF)
+ cfg |= PWR_ON;
+ else
+ cfg &= ~PWR_ON;
+
+ bfin_write_SDH_CFG(cfg);
+#endif
SSYNC();
- spin_unlock_irqrestore(&host->lock, flags);
+ if (ios->power_mode == MMC_POWER_ON && ios->clock) {
+ unsigned char clk_div;
+ clk_div = (get_sclk() / ios->clock - 1) / 2;
+ clk_div = min_t(unsigned char, clk_div, 0xFF);
+ clk_ctl |= clk_div;
+ clk_ctl |= CLK_E;
+ host->clk_div = clk_div;
+ bfin_write_SDH_CLK_CTL(clk_ctl);
+
+ } else
+ sdh_stop_clock(host);
+
+ /* set up sdh interrupt mask*/
+ if (ios->power_mode == MMC_POWER_ON)
+ bfin_write_SDH_MASK0(DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL |
+ RX_OVERRUN | TX_UNDERRUN | CMD_SENT | CMD_RESP_END |
+ CMD_TIME_OUT | CMD_CRC_FAIL);
+ else
+ bfin_write_SDH_MASK0(0);
+ SSYNC();
+
+ spin_unlock(&host->lock);
dev_dbg(mmc_dev(host->mmc), "SDH: clk_div = 0x%x actual clock:%ld expected clock:%d\n",
host->clk_div,
@@ -405,7 +463,7 @@ static irqreturn_t sdh_dma_irq(int irq, void *devid)
{
struct sdh_host *host = devid;
- dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04x\n", __func__,
+ dev_dbg(mmc_dev(host->mmc), "%s enter, irq_stat: 0x%04lx\n", __func__,
get_dma_curr_irqstat(host->dma_ch));
clear_dma_irqstat(host->dma_ch);
SSYNC();
@@ -420,6 +478,9 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid)
int handled = 0;
dev_dbg(mmc_dev(host->mmc), "%s enter\n", __func__);
+
+ spin_lock(&host->lock);
+
status = bfin_read_SDH_E_STATUS();
if (status & SD_CARD_DET) {
mmc_detect_change(host->mmc, 0);
@@ -437,11 +498,30 @@ static irqreturn_t sdh_stat_irq(int irq, void *devid)
if (status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN | TX_UNDERRUN))
handled |= sdh_data_done(host, status);
+ spin_unlock(&host->lock);
+
dev_dbg(mmc_dev(host->mmc), "%s exit\n\n", __func__);
return IRQ_RETVAL(handled);
}
+static void sdh_reset(void)
+{
+#if defined(CONFIG_BF54x)
+ /* Secure Digital Host shares DMA with Nand controller */
+ bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
+#endif
+
+ bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
+ SSYNC();
+
+ /* Disable card inserting detection pin. set MMC_CAP_NEEDS_POLL, and
+ * mmc stack will do the detection.
+ */
+ bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
+ SSYNC();
+}
+
static int __devinit sdh_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
@@ -462,8 +542,16 @@ static int __devinit sdh_probe(struct platform_device *pdev)
}
mmc->ops = &sdh_ops;
- mmc->max_segs = 32;
+#if defined(CONFIG_BF51x)
+ mmc->max_segs = 1;
+#else
+ mmc->max_segs = PAGE_SIZE / sizeof(struct dma_desc_array);
+#endif
+#ifdef RSI_BLKSZ
+ mmc->max_seg_size = -1;
+#else
mmc->max_seg_size = 1 << 16;
+#endif
mmc->max_blk_size = 1 << 11;
mmc->max_blk_count = 1 << 11;
mmc->max_req_size = PAGE_SIZE;
@@ -473,6 +561,7 @@ static int __devinit sdh_probe(struct platform_device *pdev)
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NEEDS_POLL;
host = mmc_priv(mmc);
host->mmc = mmc;
+ host->sclk = get_sclk();
spin_lock_init(&host->lock);
host->irq = drv_data->irq_int0;
@@ -497,7 +586,6 @@ static int __devinit sdh_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, mmc);
- mmc_add_host(mmc);
ret = request_irq(host->irq, sdh_stat_irq, 0, "SDH Status IRQ", host);
if (ret) {
@@ -510,20 +598,10 @@ static int __devinit sdh_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "unable to request peripheral pins\n");
goto out4;
}
-#if defined(CONFIG_BF54x)
- /* Secure Digital Host shares DMA with Nand controller */
- bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
-#endif
-
- bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
- SSYNC();
- /* Disable card inserting detection pin. set MMC_CAP_NEES_POLL, and
- * mmc stack will do the detection.
- */
- bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
- SSYNC();
+ sdh_reset();
+ mmc_add_host(mmc);
return 0;
out4:
@@ -571,7 +649,6 @@ static int sdh_suspend(struct platform_device *dev, pm_message_t state)
if (mmc)
ret = mmc_suspend_host(mmc);
- bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() & ~PWR_ON);
peripheral_free_list(drv_data->pin_req);
return ret;
@@ -589,16 +666,7 @@ static int sdh_resume(struct platform_device *dev)
return ret;
}
- bfin_write_SDH_PWR_CTL(bfin_read_SDH_PWR_CTL() | PWR_ON);
-#if defined(CONFIG_BF54x)
- /* Secure Digital Host shares DMA with Nand controller */
- bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
-#endif
- bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
- SSYNC();
-
- bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | (PUP_SDDAT | PUP_SDDAT3));
- SSYNC();
+ sdh_reset();
if (mmc)
ret = mmc_resume_host(mmc);
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 3dfd347..2063677 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -30,11 +30,12 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
+#include <linux/edma.h>
#include <linux/mmc/mmc.h>
#include <linux/platform_data/mmc-davinci.h>
-#include <mach/edma.h>
/*
* Register Definitions
@@ -200,21 +201,13 @@ struct mmc_davinci_host {
u32 bytes_left;
u32 rxdma, txdma;
+ struct dma_chan *dma_tx;
+ struct dma_chan *dma_rx;
bool use_dma;
bool do_dma;
bool sdio_int;
bool active_request;
- /* Scatterlist DMA uses one or more parameter RAM entries:
- * the main one (associated with rxdma or txdma) plus zero or
- * more links. The entries for a given transfer differ only
- * by memory buffer (address, length) and link field.
- */
- struct edmacc_param tx_template;
- struct edmacc_param rx_template;
- unsigned n_link;
- u32 links[MAX_NR_SG - 1];
-
/* For PIO we walk scatterlists one segment at a time. */
unsigned int sg_len;
struct scatterlist *sg;
@@ -410,153 +403,74 @@ static void mmc_davinci_start_command(struct mmc_davinci_host *host,
static void davinci_abort_dma(struct mmc_davinci_host *host)
{
- int sync_dev;
+ struct dma_chan *sync_dev;
if (host->data_dir == DAVINCI_MMC_DATADIR_READ)
- sync_dev = host->rxdma;
+ sync_dev = host->dma_rx;
else
- sync_dev = host->txdma;
-
- edma_stop(sync_dev);
- edma_clean_channel(sync_dev);
-}
-
-static void
-mmc_davinci_xfer_done(struct mmc_davinci_host *host, struct mmc_data *data);
-
-static void mmc_davinci_dma_cb(unsigned channel, u16 ch_status, void *data)
-{
- if (DMA_COMPLETE != ch_status) {
- struct mmc_davinci_host *host = data;
-
- /* Currently means: DMA Event Missed, or "null" transfer
- * request was seen. In the future, TC errors (like bad
- * addresses) might be presented too.
- */
- dev_warn(mmc_dev(host->mmc), "DMA %s error\n",
- (host->data->flags & MMC_DATA_WRITE)
- ? "write" : "read");
- host->data->error = -EIO;
- mmc_davinci_xfer_done(host, host->data);
- }
-}
-
-/* Set up tx or rx template, to be modified and updated later */
-static void __init mmc_davinci_dma_setup(struct mmc_davinci_host *host,
- bool tx, struct edmacc_param *template)
-{
- unsigned sync_dev;
- const u16 acnt = 4;
- const u16 bcnt = rw_threshold >> 2;
- const u16 ccnt = 0;
- u32 src_port = 0;
- u32 dst_port = 0;
- s16 src_bidx, dst_bidx;
- s16 src_cidx, dst_cidx;
-
- /*
- * A-B Sync transfer: each DMA request is for one "frame" of
- * rw_threshold bytes, broken into "acnt"-size chunks repeated
- * "bcnt" times. Each segment needs "ccnt" such frames; since
- * we tell the block layer our mmc->max_seg_size limit, we can
- * trust (later) that it's within bounds.
- *
- * The FIFOs are read/written in 4-byte chunks (acnt == 4) and
- * EDMA will optimize memory operations to use larger bursts.
- */
- if (tx) {
- sync_dev = host->txdma;
-
- /* src_prt, ccnt, and link to be set up later */
- src_bidx = acnt;
- src_cidx = acnt * bcnt;
-
- dst_port = host->mem_res->start + DAVINCI_MMCDXR;
- dst_bidx = 0;
- dst_cidx = 0;
- } else {
- sync_dev = host->rxdma;
-
- src_port = host->mem_res->start + DAVINCI_MMCDRR;
- src_bidx = 0;
- src_cidx = 0;
-
- /* dst_prt, ccnt, and link to be set up later */
- dst_bidx = acnt;
- dst_cidx = acnt * bcnt;
- }
-
- /*
- * We can't use FIFO mode for the FIFOs because MMC FIFO addresses
- * are not 256-bit (32-byte) aligned. So we use INCR, and the W8BIT
- * parameter is ignored.
- */
- edma_set_src(sync_dev, src_port, INCR, W8BIT);
- edma_set_dest(sync_dev, dst_port, INCR, W8BIT);
+ sync_dev = host->dma_tx;
- edma_set_src_index(sync_dev, src_bidx, src_cidx);
- edma_set_dest_index(sync_dev, dst_bidx, dst_cidx);
-
- edma_set_transfer_params(sync_dev, acnt, bcnt, ccnt, 8, ABSYNC);
-
- edma_read_slot(sync_dev, template);
-
- /* don't bother with irqs or chaining */
- template->opt |= EDMA_CHAN_SLOT(sync_dev) << 12;
+ dmaengine_terminate_all(sync_dev);
}
-static void mmc_davinci_send_dma_request(struct mmc_davinci_host *host,
+static int mmc_davinci_send_dma_request(struct mmc_davinci_host *host,
struct mmc_data *data)
{
- struct edmacc_param *template;
- int channel, slot;
- unsigned link;
- struct scatterlist *sg;
- unsigned sg_len;
- unsigned bytes_left = host->bytes_left;
- const unsigned shift = ffs(rw_threshold) - 1;
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *desc;
+ int ret = 0;
if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE) {
- template = &host->tx_template;
- channel = host->txdma;
+ struct dma_slave_config dma_tx_conf = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = host->mem_res->start + DAVINCI_MMCDXR,
+ .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .dst_maxburst =
+ rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES,
+ };
+ chan = host->dma_tx;
+ dmaengine_slave_config(host->dma_tx, &dma_tx_conf);
+
+ desc = dmaengine_prep_slave_sg(host->dma_tx,
+ data->sg,
+ host->sg_len,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_dbg(mmc_dev(host->mmc),
+ "failed to allocate DMA TX descriptor");
+ ret = -1;
+ goto out;
+ }
} else {
- template = &host->rx_template;
- channel = host->rxdma;
- }
-
- /* We know sg_len and ccnt will never be out of range because
- * we told the mmc layer which in turn tells the block layer
- * to ensure that it only hands us one scatterlist segment
- * per EDMA PARAM entry. Update the PARAM
- * entries needed for each segment of this scatterlist.
- */
- for (slot = channel, link = 0, sg = data->sg, sg_len = host->sg_len;
- sg_len-- != 0 && bytes_left;
- sg = sg_next(sg), slot = host->links[link++]) {
- u32 buf = sg_dma_address(sg);
- unsigned count = sg_dma_len(sg);
-
- template->link_bcntrld = sg_len
- ? (EDMA_CHAN_SLOT(host->links[link]) << 5)
- : 0xffff;
-
- if (count > bytes_left)
- count = bytes_left;
- bytes_left -= count;
-
- if (host->data_dir == DAVINCI_MMC_DATADIR_WRITE)
- template->src = buf;
- else
- template->dst = buf;
- template->ccnt = count >> shift;
-
- edma_write_slot(slot, template);
+ struct dma_slave_config dma_rx_conf = {
+ .direction = DMA_DEV_TO_MEM,
+ .src_addr = host->mem_res->start + DAVINCI_MMCDRR,
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .src_maxburst =
+ rw_threshold / DMA_SLAVE_BUSWIDTH_4_BYTES,
+ };
+ chan = host->dma_rx;
+ dmaengine_slave_config(host->dma_rx, &dma_rx_conf);
+
+ desc = dmaengine_prep_slave_sg(host->dma_rx,
+ data->sg,
+ host->sg_len,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_dbg(mmc_dev(host->mmc),
+ "failed to allocate DMA RX descriptor");
+ ret = -1;
+ goto out;
+ }
}
- if (host->version == MMC_CTLR_VERSION_2)
- edma_clear_event(channel);
+ dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
- edma_start(channel);
+out:
+ return ret;
}
static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
@@ -564,6 +478,7 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
{
int i;
int mask = rw_threshold - 1;
+ int ret = 0;
host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
((data->flags & MMC_DATA_WRITE)
@@ -583,70 +498,48 @@ static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host *host,
}
host->do_dma = 1;
- mmc_davinci_send_dma_request(host, data);
+ ret = mmc_davinci_send_dma_request(host, data);
- return 0;
+ return ret;
}
static void __init_or_module
davinci_release_dma_channels(struct mmc_davinci_host *host)
{
- unsigned i;
-
if (!host->use_dma)
return;
- for (i = 0; i < host->n_link; i++)
- edma_free_slot(host->links[i]);
-
- edma_free_channel(host->txdma);
- edma_free_channel(host->rxdma);
+ dma_release_channel(host->dma_tx);
+ dma_release_channel(host->dma_rx);
}
static int __init davinci_acquire_dma_channels(struct mmc_davinci_host *host)
{
- u32 link_size;
- int r, i;
-
- /* Acquire master DMA write channel */
- r = edma_alloc_channel(host->txdma, mmc_davinci_dma_cb, host,
- EVENTQ_DEFAULT);
- if (r < 0) {
- dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
- "tx", r);
- return r;
- }
- mmc_davinci_dma_setup(host, true, &host->tx_template);
-
- /* Acquire master DMA read channel */
- r = edma_alloc_channel(host->rxdma, mmc_davinci_dma_cb, host,
- EVENTQ_DEFAULT);
- if (r < 0) {
- dev_warn(mmc_dev(host->mmc), "alloc %s channel err %d\n",
- "rx", r);
- goto free_master_write;
+ int r;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->dma_tx =
+ dma_request_channel(mask, edma_filter_fn, &host->txdma);
+ if (!host->dma_tx) {
+ dev_err(mmc_dev(host->mmc), "Can't get dma_tx channel\n");
+ return -ENODEV;
}
- mmc_davinci_dma_setup(host, false, &host->rx_template);
- /* Allocate parameter RAM slots, which will later be bound to a
- * channel as needed to handle a scatterlist.
- */
- link_size = min_t(unsigned, host->nr_sg, ARRAY_SIZE(host->links));
- for (i = 0; i < link_size; i++) {
- r = edma_alloc_slot(EDMA_CTLR(host->txdma), EDMA_SLOT_ANY);
- if (r < 0) {
- dev_dbg(mmc_dev(host->mmc), "dma PaRAM alloc --> %d\n",
- r);
- break;
- }
- host->links[i] = r;
+ host->dma_rx =
+ dma_request_channel(mask, edma_filter_fn, &host->rxdma);
+ if (!host->dma_rx) {
+ dev_err(mmc_dev(host->mmc), "Can't get dma_rx channel\n");
+ r = -ENODEV;
+ goto free_master_write;
}
- host->n_link = i;
return 0;
free_master_write:
- edma_free_channel(host->txdma);
+ dma_release_channel(host->dma_tx);
return r;
}
@@ -1359,7 +1252,7 @@ static int __init davinci_mmcsd_probe(struct platform_device *pdev)
* Each hw_seg uses one EDMA parameter RAM slot, always one
* channel and then usually some linked slots.
*/
- mmc->max_segs = 1 + host->n_link;
+ mmc->max_segs = MAX_NR_SG;
/* EDMA limit per hw segment (one or two MBytes) */
mmc->max_seg_size = MAX_CCNT * rw_threshold;
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
new file mode 100644
index 0000000..660bbc5
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -0,0 +1,253 @@
+/*
+ * Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
+ *
+ * Copyright (C) 2012, Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define NUM_PINS(x) (x + 2)
+
+#define SDMMC_CLKSEL 0x09C
+#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
+#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
+#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
+#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7)
+#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \
+ SDMMC_CLKSEL_CCLK_DRIVE(y) | \
+ SDMMC_CLKSEL_CCLK_DIVIDER(z))
+
+#define SDMMC_CMD_USE_HOLD_REG BIT(29)
+
+#define EXYNOS4210_FIXED_CIU_CLK_DIV 2
+#define EXYNOS4412_FIXED_CIU_CLK_DIV 4
+
+/* Variations in Exynos specific dw-mshc controller */
+enum dw_mci_exynos_type {
+ DW_MCI_TYPE_EXYNOS4210,
+ DW_MCI_TYPE_EXYNOS4412,
+ DW_MCI_TYPE_EXYNOS5250,
+};
+
+/* Exynos implementation specific driver private data */
+struct dw_mci_exynos_priv_data {
+ enum dw_mci_exynos_type ctrl_type;
+ u8 ciu_div;
+ u32 sdr_timing;
+ u32 ddr_timing;
+};
+
+static struct dw_mci_exynos_compatible {
+ char *compatible;
+ enum dw_mci_exynos_type ctrl_type;
+} exynos_compat[] = {
+ {
+ .compatible = "samsung,exynos4210-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS4210,
+ }, {
+ .compatible = "samsung,exynos4412-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS4412,
+ }, {
+ .compatible = "samsung,exynos5250-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS5250,
+ },
+};
+
+static int dw_mci_exynos_priv_init(struct dw_mci *host)
+{
+ struct dw_mci_exynos_priv_data *priv;
+ int idx;
+
+ priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(host->dev, "mem alloc failed for private data\n");
+ return -ENOMEM;
+ }
+
+ for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
+ if (of_device_is_compatible(host->dev->of_node,
+ exynos_compat[idx].compatible))
+ priv->ctrl_type = exynos_compat[idx].ctrl_type;
+ }
+
+ host->priv = priv;
+ return 0;
+}
+
+static int dw_mci_exynos_setup_clock(struct dw_mci *host)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250)
+ host->bus_hz /= (priv->ciu_div + 1);
+ else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
+ host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV;
+ else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
+ host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV;
+
+ return 0;
+}
+
+static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+ /*
+ * Exynos4412 and Exynos5250 extends the use of CMD register with the
+ * use of bit 29 (which is reserved on standard MSHC controllers) for
+ * optionally bypassing the HOLD register for command and data. The
+ * HOLD register should be bypassed in case there is no phase shift
+ * applied on CMD/DATA that is sent to the card.
+ */
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (ios->timing == MMC_TIMING_UHS_DDR50)
+ mci_writel(host, CLKSEL, priv->ddr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->sdr_timing);
+}
+
+static int dw_mci_exynos_parse_dt(struct dw_mci *host)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+ struct device_node *np = host->dev->of_node;
+ u32 timing[2];
+ u32 div = 0;
+ int ret;
+
+ of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
+ priv->ciu_div = div;
+
+ ret = of_property_read_u32_array(np,
+ "samsung,dw-mshc-sdr-timing", timing, 2);
+ if (ret)
+ return ret;
+
+ priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
+
+ ret = of_property_read_u32_array(np,
+ "samsung,dw-mshc-ddr-timing", timing, 2);
+ if (ret)
+ return ret;
+
+ priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
+ return 0;
+}
+
+static int dw_mci_exynos_setup_bus(struct dw_mci *host,
+ struct device_node *slot_np, u8 bus_width)
+{
+ int idx, gpio, ret;
+
+ if (!slot_np)
+ return -EINVAL;
+
+ /* cmd + clock + bus-width pins */
+ for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
+ gpio = of_get_gpio(slot_np, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(host->dev, "invalid gpio: %d\n", gpio);
+ return -EINVAL;
+ }
+
+ ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
+ if (ret) {
+ dev_err(host->dev, "gpio [%d] request failed\n", gpio);
+ return -EBUSY;
+ }
+ }
+
+ gpio = of_get_named_gpio(slot_np, "wp-gpios", 0);
+ if (gpio_is_valid(gpio)) {
+ if (devm_gpio_request(host->dev, gpio, "dw-mci-wp"))
+ dev_info(host->dev, "gpio [%d] request failed\n",
+ gpio);
+ } else {
+ dev_info(host->dev, "wp gpio not available");
+ host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT;
+ }
+
+ if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+ return 0;
+
+ gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
+ if (gpio_is_valid(gpio)) {
+ if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
+ dev_err(host->dev, "gpio [%d] request failed\n", gpio);
+ } else {
+ dev_info(host->dev, "cd gpio not available");
+ }
+
+ return 0;
+}
+
+/* Exynos5250 controller specific capabilities */
+static unsigned long exynos5250_dwmmc_caps[4] = {
+ MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
+ MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
+ MMC_CAP_CMD23,
+ MMC_CAP_CMD23,
+ MMC_CAP_CMD23,
+};
+
+static struct dw_mci_drv_data exynos5250_drv_data = {
+ .caps = exynos5250_dwmmc_caps,
+ .init = dw_mci_exynos_priv_init,
+ .setup_clock = dw_mci_exynos_setup_clock,
+ .prepare_command = dw_mci_exynos_prepare_command,
+ .set_ios = dw_mci_exynos_set_ios,
+ .parse_dt = dw_mci_exynos_parse_dt,
+ .setup_bus = dw_mci_exynos_setup_bus,
+};
+
+static const struct of_device_id dw_mci_exynos_match[] = {
+ { .compatible = "samsung,exynos5250-dw-mshc",
+ .data = (void *)&exynos5250_drv_data, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
+
+int dw_mci_exynos_probe(struct platform_device *pdev)
+{
+ struct dw_mci_drv_data *drv_data;
+ const struct of_device_id *match;
+
+ match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
+ drv_data = match->data;
+ return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+static struct platform_driver dw_mci_exynos_pltfm_driver = {
+ .probe = dw_mci_exynos_probe,
+ .remove = __exit_p(dw_mci_pltfm_remove),
+ .driver = {
+ .name = "dwmmc_exynos",
+ .of_match_table = of_match_ptr(dw_mci_exynos_match),
+ .pm = &dw_mci_pltfm_pmops,
+ },
+};
+
+module_platform_driver(dw_mci_exynos_pltfm_driver);
+
+MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension");
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dwmmc-exynos");
diff --git a/drivers/mmc/host/dw_mmc-pci.c b/drivers/mmc/host/dw_mmc-pci.c
index dc0d25a..edb37e9 100644
--- a/drivers/mmc/host/dw_mmc-pci.c
+++ b/drivers/mmc/host/dw_mmc-pci.c
@@ -59,7 +59,7 @@ static int __devinit dw_mci_pci_probe(struct pci_dev *pdev,
host->irq = pdev->irq;
host->irq_flags = IRQF_SHARED;
- host->dev = pdev->dev;
+ host->dev = &pdev->dev;
host->pdata = &pci_board_data;
host->regs = pci_iomap(pdev, PCI_BAR_NO, COMPLETE_BAR);
@@ -140,18 +140,7 @@ static struct pci_driver dw_mci_pci_driver = {
},
};
-static int __init dw_mci_init(void)
-{
- return pci_register_driver(&dw_mci_pci_driver);
-}
-
-static void __exit dw_mci_exit(void)
-{
- pci_unregister_driver(&dw_mci_pci_driver);
-}
-
-module_init(dw_mci_init);
-module_exit(dw_mci_exit);
+module_pci_driver(dw_mci_pci_driver);
MODULE_DESCRIPTION("DW Multimedia Card PCI Interface driver");
MODULE_AUTHOR("Shashidhar Hiremath <shashidharh@vayavyalabs.com>");
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 92ec3eb..c960ca7 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -19,59 +19,63 @@
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/dw_mmc.h>
+#include <linux/of.h>
+
#include "dw_mmc.h"
-static int dw_mci_pltfm_probe(struct platform_device *pdev)
+int dw_mci_pltfm_register(struct platform_device *pdev,
+ struct dw_mci_drv_data *drv_data)
{
struct dw_mci *host;
struct resource *regs;
int ret;
- host = kzalloc(sizeof(struct dw_mci), GFP_KERNEL);
+ host = devm_kzalloc(&pdev->dev, sizeof(struct dw_mci), GFP_KERNEL);
if (!host)
return -ENOMEM;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!regs) {
- ret = -ENXIO;
- goto err_free;
- }
+ if (!regs)
+ return -ENXIO;
host->irq = platform_get_irq(pdev, 0);
- if (host->irq < 0) {
- ret = host->irq;
- goto err_free;
- }
+ if (host->irq < 0)
+ return host->irq;
- host->dev = pdev->dev;
+ host->drv_data = drv_data;
+ host->dev = &pdev->dev;
host->irq_flags = 0;
host->pdata = pdev->dev.platform_data;
- ret = -ENOMEM;
- host->regs = ioremap(regs->start, resource_size(regs));
+ host->regs = devm_request_and_ioremap(&pdev->dev, regs);
if (!host->regs)
- goto err_free;
+ return -ENOMEM;
+
+ if (host->drv_data->init) {
+ ret = host->drv_data->init(host);
+ if (ret)
+ return ret;
+ }
+
platform_set_drvdata(pdev, host);
ret = dw_mci_probe(host);
- if (ret)
- goto err_out;
- return ret;
-err_out:
- iounmap(host->regs);
-err_free:
- kfree(host);
return ret;
}
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_register);
-static int __exit dw_mci_pltfm_remove(struct platform_device *pdev)
+static int __devinit dw_mci_pltfm_probe(struct platform_device *pdev)
+{
+ return dw_mci_pltfm_register(pdev, NULL);
+}
+
+static int __devexit dw_mci_pltfm_remove(struct platform_device *pdev)
{
struct dw_mci *host = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
dw_mci_remove(host);
- iounmap(host->regs);
- kfree(host);
return 0;
}
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_remove);
#ifdef CONFIG_PM_SLEEP
/*
@@ -105,12 +109,20 @@ static int dw_mci_pltfm_resume(struct device *dev)
#define dw_mci_pltfm_resume NULL
#endif /* CONFIG_PM_SLEEP */
-static SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume);
+SIMPLE_DEV_PM_OPS(dw_mci_pltfm_pmops, dw_mci_pltfm_suspend, dw_mci_pltfm_resume);
+EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
+
+static const struct of_device_id dw_mci_pltfm_match[] = {
+ { .compatible = "snps,dw-mshc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
static struct platform_driver dw_mci_pltfm_driver = {
.remove = __exit_p(dw_mci_pltfm_remove),
.driver = {
.name = "dw_mmc",
+ .of_match_table = of_match_ptr(dw_mci_pltfm_match),
.pm = &dw_mci_pltfm_pmops,
},
};
diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h
new file mode 100644
index 0000000..301f245
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-pltfm.h
@@ -0,0 +1,20 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface Platform driver
+ *
+ * Copyright (C) 2012, Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DW_MMC_PLTFM_H_
+#define _DW_MMC_PLTFM_H_
+
+extern int dw_mci_pltfm_register(struct platform_device *pdev,
+ struct dw_mci_drv_data *drv_data);
+extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev);
+extern const struct dev_pm_ops dw_mci_pltfm_pmops;
+
+#endif /* _DW_MMC_PLTFM_H_ */
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index af40d22..c2828f3 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -33,6 +33,7 @@
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
#include <linux/workqueue.h>
+#include <linux/of.h>
#include "dw_mmc.h"
@@ -230,6 +231,7 @@ static void dw_mci_set_timeout(struct dw_mci *host)
static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct mmc_data *data;
+ struct dw_mci_slot *slot = mmc_priv(mmc);
u32 cmdr;
cmd->error = -EINPROGRESS;
@@ -259,6 +261,9 @@ static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
cmdr |= SDMMC_CMD_DAT_WR;
}
+ if (slot->host->drv_data->prepare_command)
+ slot->host->drv_data->prepare_command(slot->host, &cmdr);
+
return cmdr;
}
@@ -266,7 +271,7 @@ static void dw_mci_start_command(struct dw_mci *host,
struct mmc_command *cmd, u32 cmd_flags)
{
host->cmd = cmd;
- dev_vdbg(&host->dev,
+ dev_vdbg(host->dev,
"start command: ARGR=0x%08x CMDR=0x%08x\n",
cmd->arg, cmd_flags);
@@ -308,7 +313,7 @@ static void dw_mci_dma_cleanup(struct dw_mci *host)
if (data)
if (!data->host_cookie)
- dma_unmap_sg(&host->dev,
+ dma_unmap_sg(host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
@@ -334,7 +339,7 @@ static void dw_mci_idmac_complete_dma(struct dw_mci *host)
{
struct mmc_data *data = host->data;
- dev_vdbg(&host->dev, "DMA complete\n");
+ dev_vdbg(host->dev, "DMA complete\n");
host->dma_ops->cleanup(host);
@@ -405,23 +410,11 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
static int dw_mci_idmac_init(struct dw_mci *host)
{
struct idmac_desc *p;
- int i, dma_support;
+ int i;
/* Number of descriptors in the ring buffer */
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
- /* Check if Hardware Configuration Register has support for DMA */
- dma_support = (mci_readl(host, HCON) >> 16) & 0x3;
-
- if (!dma_support || dma_support > 2) {
- dev_err(&host->dev,
- "Host Controller does not support IDMA Tx.\n");
- host->dma_ops = NULL;
- return -ENODEV;
- }
-
- dev_info(&host->dev, "Using internal DMA controller.\n");
-
/* Forward link the descriptor list */
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
@@ -476,7 +469,7 @@ static int dw_mci_pre_dma_transfer(struct dw_mci *host,
return -EINVAL;
}
- sg_len = dma_map_sg(&host->dev,
+ sg_len = dma_map_sg(host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
@@ -519,7 +512,7 @@ static void dw_mci_post_req(struct mmc_host *mmc,
return;
if (data->host_cookie)
- dma_unmap_sg(&slot->host->dev,
+ dma_unmap_sg(slot->host->dev,
data->sg,
data->sg_len,
dw_mci_get_dma_dir(data));
@@ -545,7 +538,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
host->using_dma = 1;
- dev_vdbg(&host->dev,
+ dev_vdbg(host->dev,
"sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
(unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
sg_len);
@@ -814,6 +807,9 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
slot->clock = ios->clock;
}
+ if (slot->host->drv_data->set_ios)
+ slot->host->drv_data->set_ios(slot->host, ios);
+
switch (ios->power_mode) {
case MMC_POWER_UP:
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
@@ -830,7 +826,9 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
struct dw_mci_board *brd = slot->host->pdata;
/* Use platform get_ro function, else try on board write protect */
- if (brd->get_ro)
+ if (brd->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT)
+ read_only = 0;
+ else if (brd->get_ro)
read_only = brd->get_ro(slot->id);
else
read_only =
@@ -939,12 +937,12 @@ static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
slot = list_entry(host->queue.next,
struct dw_mci_slot, queue_node);
list_del(&slot->queue_node);
- dev_vdbg(&host->dev, "list not empty: %s is next\n",
+ dev_vdbg(host->dev, "list not empty: %s is next\n",
mmc_hostname(slot->mmc));
host->state = STATE_SENDING_CMD;
dw_mci_start_request(host, slot);
} else {
- dev_vdbg(&host->dev, "list empty\n");
+ dev_vdbg(host->dev, "list empty\n");
host->state = STATE_IDLE;
}
@@ -1083,7 +1081,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
data->bytes_xfered = 0;
data->error = -ETIMEDOUT;
} else {
- dev_err(&host->dev,
+ dev_err(host->dev,
"data FIFO error "
"(status=%08x)\n",
status);
@@ -1767,12 +1765,60 @@ static void dw_mci_work_routine_card(struct work_struct *work)
}
}
-static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
+#ifdef CONFIG_OF
+/* given a slot id, find out the device node representing that slot */
+static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
+{
+ struct device_node *np;
+ const __be32 *addr;
+ int len;
+
+ if (!dev || !dev->of_node)
+ return NULL;
+
+ for_each_child_of_node(dev->of_node, np) {
+ addr = of_get_property(np, "reg", &len);
+ if (!addr || (len < sizeof(int)))
+ continue;
+ if (be32_to_cpup(addr) == slot)
+ return np;
+ }
+ return NULL;
+}
+
+/* find out bus-width for a given slot */
+static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
+{
+ struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
+ u32 bus_wd = 1;
+
+ if (!np)
+ return 1;
+
+ if (of_property_read_u32(np, "bus-width", &bus_wd))
+ dev_err(dev, "bus-width property not found, assuming width"
+ " as 1\n");
+ return bus_wd;
+}
+#else /* CONFIG_OF */
+static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot)
+{
+ return 1;
+}
+static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
+static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
+ int ctrl_id, ret;
+ u8 bus_width;
- mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), &host->dev);
+ mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
if (!mmc)
return -ENOMEM;
@@ -1780,6 +1826,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
slot->id = id;
slot->mmc = mmc;
slot->host = host;
+ host->slot[id] = slot;
mmc->ops = &dw_mci_ops;
mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510);
@@ -1800,21 +1847,44 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
+ if (host->dev->of_node) {
+ ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
+ if (ctrl_id < 0)
+ ctrl_id = 0;
+ } else {
+ ctrl_id = to_platform_device(host->dev)->id;
+ }
+ if (host->drv_data && host->drv_data->caps)
+ mmc->caps |= host->drv_data->caps[ctrl_id];
+
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
if (host->pdata->get_bus_wd)
- if (host->pdata->get_bus_wd(slot->id) >= 4)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
+ bus_width = host->pdata->get_bus_wd(slot->id);
+ else if (host->dev->of_node)
+ bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id);
+ else
+ bus_width = 1;
+
+ if (host->drv_data->setup_bus) {
+ struct device_node *slot_np;
+ slot_np = dw_mci_of_find_slot_node(host->dev, slot->id);
+ ret = host->drv_data->setup_bus(host, slot_np, bus_width);
+ if (ret)
+ goto err_setup_bus;
+ }
+
+ switch (bus_width) {
+ case 8:
+ mmc->caps |= MMC_CAP_8_BIT_DATA;
+ case 4:
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ }
if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
- if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY)
- mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
- else
- mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
-
if (host->pdata->blk_settings) {
mmc->max_segs = host->pdata->blk_settings->max_segs;
mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
@@ -1850,7 +1920,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
else
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
- host->slot[id] = slot;
mmc_add_host(mmc);
#if defined(CONFIG_DEBUG_FS)
@@ -1867,6 +1936,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
queue_work(host->card_workqueue, &host->card_work);
return 0;
+
+err_setup_bus:
+ mmc_free_host(mmc);
+ return -EINVAL;
}
static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
@@ -1884,10 +1957,10 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
static void dw_mci_init_dma(struct dw_mci *host)
{
/* Alloc memory for sg translation */
- host->sg_cpu = dma_alloc_coherent(&host->dev, PAGE_SIZE,
+ host->sg_cpu = dma_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
- dev_err(&host->dev, "%s: could not alloc DMA memory\n",
+ dev_err(host->dev, "%s: could not alloc DMA memory\n",
__func__);
goto no_dma;
}
@@ -1895,6 +1968,7 @@ static void dw_mci_init_dma(struct dw_mci *host)
/* Determine which DMA interface to use */
#ifdef CONFIG_MMC_DW_IDMAC
host->dma_ops = &dw_mci_idmac_ops;
+ dev_info(&host->dev, "Using internal DMA controller.\n");
#endif
if (!host->dma_ops)
@@ -1903,12 +1977,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
if (host->dma_ops->init && host->dma_ops->start &&
host->dma_ops->stop && host->dma_ops->cleanup) {
if (host->dma_ops->init(host)) {
- dev_err(&host->dev, "%s: Unable to initialize "
+ dev_err(host->dev, "%s: Unable to initialize "
"DMA Controller.\n", __func__);
goto no_dma;
}
} else {
- dev_err(&host->dev, "DMA initialization not found.\n");
+ dev_err(host->dev, "DMA initialization not found.\n");
goto no_dma;
}
@@ -1916,7 +1990,7 @@ static void dw_mci_init_dma(struct dw_mci *host)
return;
no_dma:
- dev_info(&host->dev, "Using PIO mode.\n");
+ dev_info(host->dev, "Using PIO mode.\n");
host->use_dma = 0;
return;
}
@@ -1942,30 +2016,133 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host)
return false;
}
+#ifdef CONFIG_OF
+static struct dw_mci_of_quirks {
+ char *quirk;
+ int id;
+} of_quirks[] = {
+ {
+ .quirk = "supports-highspeed",
+ .id = DW_MCI_QUIRK_HIGHSPEED,
+ }, {
+ .quirk = "broken-cd",
+ .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+ },
+};
+
+static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
+{
+ struct dw_mci_board *pdata;
+ struct device *dev = host->dev;
+ struct device_node *np = dev->of_node;
+ int idx, ret;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* find out number of slots supported */
+ if (of_property_read_u32(dev->of_node, "num-slots",
+ &pdata->num_slots)) {
+ dev_info(dev, "num-slots property not found, "
+ "assuming 1 slot is available\n");
+ pdata->num_slots = 1;
+ }
+
+ /* get quirks */
+ for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
+ if (of_get_property(np, of_quirks[idx].quirk, NULL))
+ pdata->quirks |= of_quirks[idx].id;
+
+ if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+ dev_info(dev, "fifo-depth property not found, using "
+ "value of FIFOTH register as default\n");
+
+ of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+
+ if (host->drv_data->parse_dt) {
+ ret = host->drv_data->parse_dt(host);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
+ return pdata;
+}
+
+#else /* CONFIG_OF */
+static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_OF */
+
int dw_mci_probe(struct dw_mci *host)
{
int width, i, ret = 0;
u32 fifo_size;
+ int init_slots = 0;
- if (!host->pdata || !host->pdata->init) {
- dev_err(&host->dev,
- "Platform data must supply init function\n");
- return -ENODEV;
+ if (!host->pdata) {
+ host->pdata = dw_mci_parse_dt(host);
+ if (IS_ERR(host->pdata)) {
+ dev_err(host->dev, "platform data not available\n");
+ return -EINVAL;
+ }
}
if (!host->pdata->select_slot && host->pdata->num_slots > 1) {
- dev_err(&host->dev,
+ dev_err(host->dev,
"Platform data must supply select_slot function\n");
return -ENODEV;
}
- if (!host->pdata->bus_hz) {
- dev_err(&host->dev,
+ host->biu_clk = clk_get(host->dev, "biu");
+ if (IS_ERR(host->biu_clk)) {
+ dev_dbg(host->dev, "biu clock not available\n");
+ } else {
+ ret = clk_prepare_enable(host->biu_clk);
+ if (ret) {
+ dev_err(host->dev, "failed to enable biu clock\n");
+ clk_put(host->biu_clk);
+ return ret;
+ }
+ }
+
+ host->ciu_clk = clk_get(host->dev, "ciu");
+ if (IS_ERR(host->ciu_clk)) {
+ dev_dbg(host->dev, "ciu clock not available\n");
+ } else {
+ ret = clk_prepare_enable(host->ciu_clk);
+ if (ret) {
+ dev_err(host->dev, "failed to enable ciu clock\n");
+ clk_put(host->ciu_clk);
+ goto err_clk_biu;
+ }
+ }
+
+ if (IS_ERR(host->ciu_clk))
+ host->bus_hz = host->pdata->bus_hz;
+ else
+ host->bus_hz = clk_get_rate(host->ciu_clk);
+
+ if (host->drv_data->setup_clock) {
+ ret = host->drv_data->setup_clock(host);
+ if (ret) {
+ dev_err(host->dev,
+ "implementation specific clock setup failed\n");
+ goto err_clk_ciu;
+ }
+ }
+
+ if (!host->bus_hz) {
+ dev_err(host->dev,
"Platform data must supply bus speed\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_clk_ciu;
}
- host->bus_hz = host->pdata->bus_hz;
host->quirks = host->pdata->quirks;
spin_lock_init(&host->lock);
@@ -1998,7 +2175,7 @@ int dw_mci_probe(struct dw_mci *host)
}
/* Reset all blocks */
- if (!mci_wait_reset(&host->dev, host))
+ if (!mci_wait_reset(host->dev, host))
return -ENODEV;
host->dma_ops = host->pdata->dma_ops;
@@ -2054,10 +2231,18 @@ int dw_mci_probe(struct dw_mci *host)
/* We need at least one slot to succeed */
for (i = 0; i < host->num_slots; i++) {
ret = dw_mci_init_slot(host, i);
- if (ret) {
- ret = -ENODEV;
- goto err_init_slot;
- }
+ if (ret)
+ dev_dbg(host->dev, "slot %d init failed\n", i);
+ else
+ init_slots++;
+ }
+
+ if (init_slots) {
+ dev_info(host->dev, "%d slots initialized\n", init_slots);
+ } else {
+ dev_dbg(host->dev, "attempted to initialize %d slots, "
+ "but failed on all\n", host->num_slots);
+ goto err_init_slot;
}
/*
@@ -2065,7 +2250,7 @@ int dw_mci_probe(struct dw_mci *host)
* Need to check the version-id and set data-offset for DATA register.
*/
host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
- dev_info(&host->dev, "Version ID is %04x\n", host->verid);
+ dev_info(host->dev, "Version ID is %04x\n", host->verid);
if (host->verid < DW_MMC_240A)
host->data_offset = DATA_OFFSET;
@@ -2082,22 +2267,16 @@ int dw_mci_probe(struct dw_mci *host)
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
- dev_info(&host->dev, "DW MMC controller at irq %d, "
+ dev_info(host->dev, "DW MMC controller at irq %d, "
"%d bit host data width, "
"%u deep fifo\n",
host->irq, width, fifo_size);
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
- dev_info(&host->dev, "Internal DMAC interrupt fix enabled.\n");
+ dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
return 0;
err_init_slot:
- /* De-init any initialized slots */
- while (i > 0) {
- if (host->slot[i])
- dw_mci_cleanup_slot(host->slot[i], i);
- i--;
- }
free_irq(host->irq, host);
err_workqueue:
@@ -2106,13 +2285,24 @@ err_workqueue:
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
- dma_free_coherent(&host->dev, PAGE_SIZE,
+ dma_free_coherent(host->dev, PAGE_SIZE,
host->sg_cpu, host->sg_dma);
if (host->vmmc) {
regulator_disable(host->vmmc);
regulator_put(host->vmmc);
}
+
+err_clk_ciu:
+ if (!IS_ERR(host->ciu_clk)) {
+ clk_disable_unprepare(host->ciu_clk);
+ clk_put(host->ciu_clk);
+ }
+err_clk_biu:
+ if (!IS_ERR(host->biu_clk)) {
+ clk_disable_unprepare(host->biu_clk);
+ clk_put(host->biu_clk);
+ }
return ret;
}
EXPORT_SYMBOL(dw_mci_probe);
@@ -2125,7 +2315,7 @@ void dw_mci_remove(struct dw_mci *host)
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
for (i = 0; i < host->num_slots; i++) {
- dev_dbg(&host->dev, "remove slot %d\n", i);
+ dev_dbg(host->dev, "remove slot %d\n", i);
if (host->slot[i])
dw_mci_cleanup_slot(host->slot[i], i);
}
@@ -2136,7 +2326,7 @@ void dw_mci_remove(struct dw_mci *host)
free_irq(host->irq, host);
destroy_workqueue(host->card_workqueue);
- dma_free_coherent(&host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+ dma_free_coherent(host->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
@@ -2146,6 +2336,12 @@ void dw_mci_remove(struct dw_mci *host)
regulator_put(host->vmmc);
}
+ if (!IS_ERR(host->ciu_clk))
+ clk_disable_unprepare(host->ciu_clk);
+ if (!IS_ERR(host->biu_clk))
+ clk_disable_unprepare(host->biu_clk);
+ clk_put(host->ciu_clk);
+ clk_put(host->biu_clk);
}
EXPORT_SYMBOL(dw_mci_remove);
@@ -2188,7 +2384,7 @@ int dw_mci_resume(struct dw_mci *host)
if (host->vmmc)
regulator_enable(host->vmmc);
- if (!mci_wait_reset(&host->dev, host)) {
+ if (!mci_wait_reset(host->dev, host)) {
ret = -ENODEV;
return ret;
}
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 15c27e1..53b8fd9 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -182,4 +182,28 @@ extern int dw_mci_suspend(struct dw_mci *host);
extern int dw_mci_resume(struct dw_mci *host);
#endif
+/**
+ * dw_mci driver data - dw-mshc implementation specific driver data.
+ * @caps: mmc subsystem specified capabilities of the controller(s).
+ * @init: early implementation specific initialization.
+ * @setup_clock: implementation specific clock configuration.
+ * @prepare_command: handle CMD register extensions.
+ * @set_ios: handle bus specific extensions.
+ * @parse_dt: parse implementation specific device tree properties.
+ * @setup_bus: initialize io-interface
+ *
+ * Provide controller implementation specific extensions. The usage of this
+ * data structure is fully optional and usage of each member in this structure
+ * is optional as well.
+ */
+struct dw_mci_drv_data {
+ unsigned long *caps;
+ int (*init)(struct dw_mci *host);
+ int (*setup_clock)(struct dw_mci *host);
+ void (*prepare_command)(struct dw_mci *host, u32 *cmdr);
+ void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
+ int (*parse_dt)(struct dw_mci *host);
+ int (*setup_bus)(struct dw_mci *host,
+ struct device_node *slot_np, u8 bus_width);
+};
#endif /* _DW_MMC_H_ */
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 273306c..a600eab 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1532,20 +1532,7 @@ static struct spi_driver mmc_spi_driver = {
.remove = __devexit_p(mmc_spi_remove),
};
-
-static int __init mmc_spi_init(void)
-{
- return spi_register_driver(&mmc_spi_driver);
-}
-module_init(mmc_spi_init);
-
-
-static void __exit mmc_spi_exit(void)
-{
- spi_unregister_driver(&mmc_spi_driver);
-}
-module_exit(mmc_spi_exit);
-
+module_spi_driver(mmc_spi_driver);
MODULE_AUTHOR("Mike Lavender, David Brownell, "
"Hans-Peter Nilsson, Jan Nikitenko");
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 50ff19a..edc3e9b 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1309,14 +1309,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
goto host_free;
}
- ret = clk_prepare(host->clk);
+ ret = clk_prepare_enable(host->clk);
if (ret)
goto clk_free;
- ret = clk_enable(host->clk);
- if (ret)
- goto clk_unprep;
-
host->plat = plat;
host->variant = variant;
host->mclk = clk_get_rate(host->clk);
@@ -1515,9 +1511,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
err_gpio_cd:
iounmap(host->base);
clk_disable:
- clk_disable(host->clk);
- clk_unprep:
- clk_unprepare(host->clk);
+ clk_disable_unprepare(host->clk);
clk_free:
clk_put(host->clk);
host_free:
@@ -1564,8 +1558,7 @@ static int __devexit mmci_remove(struct amba_device *dev)
gpio_free(host->gpio_cd);
iounmap(host->base);
- clk_disable(host->clk);
- clk_unprepare(host->clk);
+ clk_disable_unprepare(host->clk);
clk_put(host->clk);
if (host->vcc)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 7b1161d..565c2e4 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -44,6 +44,7 @@
#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
+#define MXCMCI_TIMEOUT_MS 10000
#define MMC_REG_STR_STP_CLK 0x00
#define MMC_REG_STATUS 0x04
@@ -150,6 +151,8 @@ struct mxcmci_host {
int dmareq;
struct dma_slave_config dma_slave_config;
struct imx_dma_data dma_data;
+
+ struct timer_list watchdog;
};
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
@@ -271,9 +274,32 @@ static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
dmaengine_submit(host->desc);
dma_async_issue_pending(host->dma);
+ mod_timer(&host->watchdog, jiffies + msecs_to_jiffies(MXCMCI_TIMEOUT_MS));
+
return 0;
}
+static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat);
+static void mxcmci_data_done(struct mxcmci_host *host, unsigned int stat);
+
+static void mxcmci_dma_callback(void *data)
+{
+ struct mxcmci_host *host = data;
+ u32 stat;
+
+ del_timer(&host->watchdog);
+
+ stat = readl(host->base + MMC_REG_STATUS);
+ writel(stat & ~STATUS_DATA_TRANS_DONE, host->base + MMC_REG_STATUS);
+
+ dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
+
+ if (stat & STATUS_READ_OP_DONE)
+ writel(STATUS_READ_OP_DONE, host->base + MMC_REG_STATUS);
+
+ mxcmci_data_done(host, stat);
+}
+
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
unsigned int cmdat)
{
@@ -305,8 +331,14 @@ static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
int_cntr = INT_END_CMD_RES_EN;
- if (mxcmci_use_dma(host))
- int_cntr |= INT_READ_OP_EN | INT_WRITE_OP_DONE_EN;
+ if (mxcmci_use_dma(host)) {
+ if (host->dma_dir == DMA_FROM_DEVICE) {
+ host->desc->callback = mxcmci_dma_callback;
+ host->desc->callback_param = host;
+ } else {
+ int_cntr |= INT_WRITE_OP_DONE_EN;
+ }
+ }
spin_lock_irqsave(&host->lock, flags);
if (host->use_sdio)
@@ -345,11 +377,9 @@ static int mxcmci_finish_data(struct mxcmci_host *host, unsigned int stat)
struct mmc_data *data = host->data;
int data_error;
- if (mxcmci_use_dma(host)) {
- dmaengine_terminate_all(host->dma);
+ if (mxcmci_use_dma(host))
dma_unmap_sg(host->dma->device->dev, data->sg, data->sg_len,
host->dma_dir);
- }
if (stat & STATUS_ERR_MASK) {
dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",
@@ -624,8 +654,10 @@ static irqreturn_t mxcmci_irq(int irq, void *devid)
mxcmci_cmd_done(host, stat);
if (mxcmci_use_dma(host) &&
- (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE)))
+ (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) {
+ del_timer(&host->watchdog);
mxcmci_data_done(host, stat);
+ }
if (host->default_irq_mask &&
(stat & (STATUS_CARD_INSERTION | STATUS_CARD_REMOVAL)))
@@ -836,6 +868,34 @@ static bool filter(struct dma_chan *chan, void *param)
return true;
}
+static void mxcmci_watchdog(unsigned long data)
+{
+ struct mmc_host *mmc = (struct mmc_host *)data;
+ struct mxcmci_host *host = mmc_priv(mmc);
+ struct mmc_request *req = host->req;
+ unsigned int stat = readl(host->base + MMC_REG_STATUS);
+
+ if (host->dma_dir == DMA_FROM_DEVICE) {
+ dmaengine_terminate_all(host->dma);
+ dev_err(mmc_dev(host->mmc),
+ "%s: read time out (status = 0x%08x)\n",
+ __func__, stat);
+ } else {
+ dev_err(mmc_dev(host->mmc),
+ "%s: write time out (status = 0x%08x)\n",
+ __func__, stat);
+ mxcmci_softreset(host);
+ }
+
+ /* Mark transfer as erroneus and inform the upper layers */
+
+ host->data->error = -ETIMEDOUT;
+ host->req = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+ mmc_request_done(host->mmc, req);
+}
+
static const struct mmc_host_ops mxcmci_ops = {
.request = mxcmci_request,
.set_ios = mxcmci_set_ios,
@@ -968,6 +1028,10 @@ static int mxcmci_probe(struct platform_device *pdev)
mmc_add_host(mmc);
+ init_timer(&host->watchdog);
+ host->watchdog.function = &mxcmci_watchdog;
+ host->watchdog.data = (unsigned long)mmc;
+
return 0;
out_free_irq:
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index bb4c2bf..80d1e6d 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -525,7 +525,7 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
} else {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c6259a8..48ad361 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -27,16 +27,10 @@
#include <linux/mmc/card.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
-#include <linux/i2c/tps65010.h>
#include <linux/slab.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
#include <plat/mmc.h>
-#include <asm/gpio.h>
#include <plat/dma.h>
-#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x01
@@ -105,7 +99,6 @@ struct mmc_omap_slot {
u16 saved_con;
u16 bus_mode;
unsigned int fclk_freq;
- unsigned powered:1;
struct tasklet_struct cover_tasklet;
struct timer_list cover_timer;
@@ -137,7 +130,6 @@ struct mmc_omap_host {
unsigned int phys_base;
int irq;
unsigned char bus_mode;
- unsigned char hw_bus_mode;
unsigned int reg_shift;
struct work_struct cmd_abort_work;
@@ -695,22 +687,29 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
host->buffer += nwords;
}
-static inline void mmc_omap_report_irq(u16 status)
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status)
{
static const char *mmc_omap_status_bits[] = {
"EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
"CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
};
- int i, c = 0;
+ int i;
+ char res[64], *buf = res;
+
+ buf += sprintf(buf, "MMC IRQ 0x%x:", status);
for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
- if (status & (1 << i)) {
- if (c)
- printk(" ");
- printk("%s", mmc_omap_status_bits[i]);
- c++;
- }
+ if (status & (1 << i))
+ buf += sprintf(buf, " %s", mmc_omap_status_bits[i]);
+ dev_vdbg(mmc_dev(host->mmc), "%s\n", res);
}
+#else
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u16 status)
+{
+}
+#endif
+
static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
{
@@ -744,12 +743,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
cmd = host->cmd->opcode;
else
cmd = -1;
-#ifdef CONFIG_MMC_DEBUG
dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
status, cmd);
- mmc_omap_report_irq(status);
- printk("\n");
-#endif
+ mmc_omap_report_irq(host, status);
+
if (host->total_bytes_left) {
if ((status & OMAP_MMC_STAT_A_FULL) ||
(status & OMAP_MMC_STAT_END_OF_DATA))
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 38adc33..54bfd0c 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -35,7 +35,6 @@
#include <linux/mmc/core.h>
#include <linux/mmc/mmc.h>
#include <linux/io.h>
-#include <linux/semaphore.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
@@ -44,7 +43,6 @@
#include <plat/cpu.h>
/* OMAP HSMMC Host Controller Registers */
-#define OMAP_HSMMC_SYSCONFIG 0x0010
#define OMAP_HSMMC_SYSSTATUS 0x0014
#define OMAP_HSMMC_CON 0x002C
#define OMAP_HSMMC_BLK 0x0104
@@ -161,8 +159,6 @@ struct omap_hsmmc_host {
unsigned int dma_sg_idx;
unsigned char bus_mode;
unsigned char power_mode;
- u32 *buffer;
- u32 bytesleft;
int suspended;
int irq;
int use_dma, dma_ch;
@@ -171,7 +167,6 @@ struct omap_hsmmc_host {
int slot_id;
int response_busy;
int context_loss;
- int vdd;
int protect_card;
int reqs_blocked;
int use_reg;
@@ -300,12 +295,12 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
struct regulator *reg;
int ocr_value = 0;
- mmc_slot(host).set_power = omap_hsmmc_set_power;
-
reg = regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
dev_dbg(host->dev, "vmmc regulator missing\n");
+ return PTR_ERR(reg);
} else {
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
if (!mmc_slot(host).ocr_mask) {
@@ -495,7 +490,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
unsigned long regval;
unsigned long timeout;
- dev_dbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
+ dev_vdbg(mmc_dev(host->mmc), "Set clock to %uHz\n", ios->clock);
omap_hsmmc_stop_clock(host);
@@ -579,21 +574,8 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
if (host->context_loss == context_loss)
return 1;
- /* Wait for hardware reset */
- timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
- while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
- && time_before(jiffies, timeout))
- ;
-
- /* Do software reset */
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET);
- timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
- while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
- && time_before(jiffies, timeout))
- ;
-
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
- OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+ if (!OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE)
+ return 1;
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
if (host->power_mode != MMC_POWER_OFF &&
@@ -745,7 +727,7 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
{
int cmdreg = 0, resptype = 0, cmdtype = 0;
- dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+ dev_vdbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
host->cmd = cmd;
@@ -934,7 +916,7 @@ static void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host, u32 status)
buf += len;
}
- dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+ dev_vdbg(mmc_dev(host->mmc), "%s\n", res);
}
#else
static inline void omap_hsmmc_dbg_report_irq(struct omap_hsmmc_host *host,
@@ -981,72 +963,40 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
__func__);
}
+static void hsmmc_command_incomplete(struct omap_hsmmc_host *host, int err)
+{
+ omap_hsmmc_reset_controller_fsm(host, SRC);
+ host->cmd->error = err;
+
+ if (host->data) {
+ omap_hsmmc_reset_controller_fsm(host, SRD);
+ omap_hsmmc_dma_cleanup(host, err);
+ }
+
+}
+
static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
{
struct mmc_data *data;
int end_cmd = 0, end_trans = 0;
- if (!host->req_in_progress) {
- do {
- OMAP_HSMMC_WRITE(host->base, STAT, status);
- /* Flush posted write */
- status = OMAP_HSMMC_READ(host->base, STAT);
- } while (status & INT_EN_MASK);
- return;
- }
-
data = host->data;
- dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+ dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
if (status & ERR) {
omap_hsmmc_dbg_report_irq(host, status);
- if ((status & CMD_TIMEOUT) ||
- (status & CMD_CRC)) {
- if (host->cmd) {
- if (status & CMD_TIMEOUT) {
- omap_hsmmc_reset_controller_fsm(host,
- SRC);
- host->cmd->error = -ETIMEDOUT;
- } else {
- host->cmd->error = -EILSEQ;
- }
- end_cmd = 1;
- }
- if (host->data || host->response_busy) {
- if (host->data)
- omap_hsmmc_dma_cleanup(host,
- -ETIMEDOUT);
- host->response_busy = 0;
- omap_hsmmc_reset_controller_fsm(host, SRD);
- }
- }
- if ((status & DATA_TIMEOUT) ||
- (status & DATA_CRC)) {
- if (host->data || host->response_busy) {
- int err = (status & DATA_TIMEOUT) ?
- -ETIMEDOUT : -EILSEQ;
-
- if (host->data)
- omap_hsmmc_dma_cleanup(host, err);
- else
- host->mrq->cmd->error = err;
- host->response_busy = 0;
- omap_hsmmc_reset_controller_fsm(host, SRD);
- end_trans = 1;
- }
- }
- if (status & CARD_ERR) {
- dev_dbg(mmc_dev(host->mmc),
- "Ignoring card err CMD%d\n", host->cmd->opcode);
- if (host->cmd)
- end_cmd = 1;
- if (host->data)
- end_trans = 1;
+ if (status & (CMD_TIMEOUT | DATA_TIMEOUT))
+ hsmmc_command_incomplete(host, -ETIMEDOUT);
+ else if (status & (CMD_CRC | DATA_CRC))
+ hsmmc_command_incomplete(host, -EILSEQ);
+
+ end_cmd = 1;
+ if (host->data || host->response_busy) {
+ end_trans = 1;
+ host->response_busy = 0;
}
}
- OMAP_HSMMC_WRITE(host->base, STAT, status);
-
if (end_cmd || ((status & CC) && host->cmd))
omap_hsmmc_cmd_done(host, host->cmd);
if ((end_trans || (status & TC)) && host->mrq)
@@ -1062,11 +1012,13 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
int status;
status = OMAP_HSMMC_READ(host->base, STAT);
- do {
+ while (status & INT_EN_MASK && host->req_in_progress) {
omap_hsmmc_do_irq(host, status);
+
/* Flush posted write */
+ OMAP_HSMMC_WRITE(host->base, STAT, status);
status = OMAP_HSMMC_READ(host->base, STAT);
- } while (status & INT_EN_MASK);
+ }
return IRQ_HANDLED;
}
@@ -1501,12 +1453,10 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
mmc_slot(host).set_power(host->dev, host->slot_id,
0, 0);
- host->vdd = 0;
break;
case MMC_POWER_UP:
mmc_slot(host).set_power(host->dev, host->slot_id,
1, ios->vdd);
- host->vdd = ios->vdd;
break;
case MMC_POWER_ON:
do_send_init_stream = 1;
@@ -1598,10 +1548,6 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
value = OMAP_HSMMC_READ(host->base, CAPA);
OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
- /* Set the controller to AUTO IDLE mode */
- value = OMAP_HSMMC_READ(host->base, SYSCONFIG);
- OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE);
-
/* Set SD bus power bit */
set_sd_bus_power(host);
}
@@ -1659,8 +1605,6 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
pm_runtime_get_sync(host->dev);
- seq_printf(s, "SYSCONFIG:\t0x%08x\n",
- OMAP_HSMMC_READ(host->base, SYSCONFIG));
seq_printf(s, "CON:\t\t0x%08x\n",
OMAP_HSMMC_READ(host->base, CON));
seq_printf(s, "HCTL:\t\t0x%08x\n",
@@ -2105,8 +2049,7 @@ static int omap_hsmmc_suspend(struct device *dev)
if (ret) {
host->suspended = 0;
if (host->pdata->resume) {
- ret = host->pdata->resume(dev, host->slot_id);
- if (ret)
+ if (host->pdata->resume(dev, host->slot_id))
dev_dbg(dev, "Unmask interrupt failed\n");
}
goto err;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index ca3915d..3f9d6d5 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -30,6 +30,9 @@
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
#include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
#include <asm/sizes.h>
@@ -573,6 +576,50 @@ static irqreturn_t pxamci_detect_irq(int irq, void *devid)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_mmc_dt_ids[] = {
+ { .compatible = "marvell,pxa-mmc" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pxa_mmc_dt_ids);
+
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pxamci_platform_data *pdata;
+ u32 tmp;
+
+ if (!np)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->gpio_card_detect =
+ of_get_named_gpio(np, "cd-gpios", 0);
+ pdata->gpio_card_ro =
+ of_get_named_gpio(np, "wp-gpios", 0);
+
+ /* pxa-mmc specific */
+ pdata->gpio_power =
+ of_get_named_gpio(np, "pxa-mmc,gpio-power", 0);
+
+ if (of_property_read_u32(np, "pxa-mmc,detect-delay-ms", &tmp) == 0)
+ pdata->detect_delay_ms = tmp;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+#else
+static int __devinit pxamci_of_init(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
static int pxamci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
@@ -580,6 +627,10 @@ static int pxamci_probe(struct platform_device *pdev)
struct resource *r, *dmarx, *dmatx;
int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
+ ret = pxamci_of_init(pdev);
+ if (ret)
+ return ret;
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
@@ -866,6 +917,7 @@ static struct platform_driver pxamci_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pxa_mmc_dt_ids),
#ifdef CONFIG_PM
.pm = &pxamci_pm_ops,
#endif
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index a6e53a1..90140eb 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
+#include <linux/of.h>
#include "sdhci-pltfm.h"
@@ -126,11 +127,18 @@ static int __devexit sdhci_dove_remove(struct platform_device *pdev)
return sdhci_pltfm_unregister(pdev);
}
+static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = {
+ { .compatible = "marvell,dove-sdhci", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table);
+
static struct platform_driver sdhci_dove_driver = {
.driver = {
.name = "sdhci-dove",
.owner = THIS_MODULE,
.pm = SDHCI_PLTFM_PMOPS,
+ .of_match_table = of_match_ptr(sdhci_dove_of_match_table),
},
.probe = sdhci_dove_probe,
.remove = __devexit_p(sdhci_dove_remove),
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index f8eb1fb..ae5fcbf 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -21,6 +21,32 @@
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
+#define VENDOR_V_22 0x12
+static u32 esdhc_readl(struct sdhci_host *host, int reg)
+{
+ u32 ret;
+
+ ret = in_be32(host->ioaddr + reg);
+ /*
+ * The bit of ADMA flag in eSDHC is not compatible with standard
+ * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
+ * supported by eSDHC.
+ * And for many FSL eSDHC controller, the reset value of field
+ * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
+ * only these vendor version is greater than 2.2/0x12 support ADMA.
+ * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
+ * the verdor version number, oxFE is SDHCI_HOST_VERSION.
+ */
+ if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
+ u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (tmp > VENDOR_V_22)
+ ret |= SDHCI_CAN_DO_ADMA2;
+ }
+
+ return ret;
+}
+
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
u16 ret;
@@ -144,7 +170,7 @@ static void esdhc_of_resume(struct sdhci_host *host)
#endif
static struct sdhci_ops sdhci_esdhc_ops = {
- .read_l = sdhci_be32bs_readl,
+ .read_l = esdhc_readl,
.read_w = esdhc_readw,
.read_b = esdhc_readb,
.write_l = sdhci_be32bs_writel,
@@ -161,9 +187,13 @@ static struct sdhci_ops sdhci_esdhc_ops = {
};
static struct sdhci_pltfm_data sdhci_esdhc_pdata = {
- /* card detection could be handled via GPIO */
+ /*
+ * card detection could be handled via GPIO
+ * eSDHC cannot support End Attribute in NOP ADMA descriptor
+ */
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
- | SDHCI_QUIRK_NO_CARD_NO_RESET,
+ | SDHCI_QUIRK_NO_CARD_NO_RESET
+ | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.ops = &sdhci_esdhc_ops,
};
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 9722d43..4bb74b0 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -1476,24 +1476,7 @@ static struct pci_driver sdhci_driver = {
},
};
-/*****************************************************************************\
- * *
- * Driver init/exit *
- * *
-\*****************************************************************************/
-
-static int __init sdhci_drv_init(void)
-{
- return pci_register_driver(&sdhci_driver);
-}
-
-static void __exit sdhci_drv_exit(void)
-{
- pci_unregister_driver(&sdhci_driver);
-}
-
-module_init(sdhci_drv_init);
-module_exit(sdhci_drv_exit);
+module_pci_driver(sdhci_driver);
MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index d9a4ef4..65551a9 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -75,6 +75,9 @@ void sdhci_get_of_property(struct platform_device *pdev)
if (sdhci_of_wp_inverted(np))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+ if (of_get_property(np, "broken-cd", NULL))
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index b6ee885..8e63a9c 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -197,7 +197,7 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
goto err_clk_get;
}
pltfm_host->clk = clk;
- clk_enable(clk);
+ clk_prepare_enable(clk);
host->quirks = SDHCI_QUIRK_BROKEN_ADMA
| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
@@ -239,7 +239,7 @@ static int __devinit sdhci_pxav2_probe(struct platform_device *pdev)
return 0;
err_add_host:
- clk_disable(clk);
+ clk_disable_unprepare(clk);
clk_put(clk);
err_clk_get:
sdhci_pltfm_free(pdev);
@@ -255,7 +255,7 @@ static int __devexit sdhci_pxav2_remove(struct platform_device *pdev)
sdhci_remove_host(host, 1);
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
sdhci_pltfm_free(pdev);
kfree(pxa);
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 07fe383..e918a2b 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -24,12 +24,14 @@
#include <linux/gpio.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
@@ -182,6 +184,7 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
struct device_node *np = dev->of_node;
u32 bus_width;
u32 clk_delay_cycles;
+ enum of_gpio_flags gpio_flags;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -198,6 +201,10 @@ static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
if (clk_delay_cycles > 0)
pdata->clk_delay_cycles = clk_delay_cycles;
+ pdata->ext_cd_gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &gpio_flags);
+ if (gpio_flags != OF_GPIO_ACTIVE_LOW)
+ pdata->host_caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
return pdata;
}
#else
@@ -231,14 +238,14 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
- clk = clk_get(dev, "PXA-SDHCLK");
+ clk = clk_get(dev, NULL);
if (IS_ERR(clk)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(clk);
goto err_clk_get;
}
pltfm_host->clk = clk;
- clk_enable(clk);
+ clk_prepare_enable(clk);
host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
@@ -266,12 +273,25 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
host->quirks |= pdata->quirks;
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
+ if (pdata->host_caps2)
+ host->mmc->caps2 |= pdata->host_caps2;
if (pdata->pm_caps)
host->mmc->pm_caps |= pdata->pm_caps;
+
+ if (gpio_is_valid(pdata->ext_cd_gpio)) {
+ ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc),
+ "failed to allocate card detect gpio\n");
+ goto err_cd_req;
+ }
+ }
}
host->ops = &pxav3_sdhci_ops;
+ sdhci_get_of_property(pdev);
+
ret = sdhci_add_host(host);
if (ret) {
dev_err(&pdev->dev, "failed to add host\n");
@@ -283,8 +303,10 @@ static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
return 0;
err_add_host:
- clk_disable(clk);
+ clk_disable_unprepare(clk);
clk_put(clk);
+ mmc_gpio_free_cd(host->mmc);
+err_cd_req:
err_clk_get:
sdhci_pltfm_free(pdev);
kfree(pxa);
@@ -296,11 +318,16 @@ static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_pxa *pxa = pltfm_host->priv;
+ struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
sdhci_remove_host(host, 1);
- clk_disable(pltfm_host->clk);
+ clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
+
+ if (gpio_is_valid(pdata->ext_cd_gpio))
+ mmc_gpio_free_cd(host->mmc);
+
sdhci_pltfm_free(pdev);
kfree(pxa);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index a50c205..2903949 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -34,6 +34,9 @@
#define MAX_BUS_CLK (4)
+/* Number of gpio's used is max data bus width + command and clock lines */
+#define NUM_GPIOS(x) (x + 2)
+
/**
* struct sdhci_s3c - S3C SDHCI instance
* @host: The SDHCI host created
@@ -41,6 +44,7 @@
* @ioarea: The resource created when we claimed the IO area.
* @pdata: The platform data for this controller.
* @cur_clk: The index of the current bus clock.
+ * @gpios: List of gpio numbers parsed from device tree.
* @clk_io: The clock for the internal bus interface.
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
*/
@@ -52,6 +56,7 @@ struct sdhci_s3c {
unsigned int cur_clk;
int ext_cd_irq;
int ext_cd_gpio;
+ int *gpios;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
@@ -166,7 +171,7 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
src, rate, wanted, rate / div);
- return (wanted - (rate / div));
+ return wanted - (rate / div);
}
/**
@@ -203,10 +208,12 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
best_src, clock, best);
/* select the new clock source */
-
if (ourhost->cur_clk != best_src) {
struct clk *clk = ourhost->clk_bus[best_src];
+ clk_enable(clk);
+ clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
+
/* turn clock off to card before changing clock source */
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
@@ -288,6 +295,7 @@ static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_s3c *ourhost = to_s3c(host);
+ struct device *dev = &ourhost->pdev->dev;
unsigned long timeout;
u16 clk = 0;
@@ -309,8 +317,8 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- printk(KERN_ERR "%s: Internal clock never "
- "stabilised.\n", mmc_hostname(host->mmc));
+ dev_err(dev, "%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
return;
}
timeout--;
@@ -404,7 +412,9 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
if (sc->ext_cd_irq &&
request_threaded_irq(sc->ext_cd_irq, NULL,
sdhci_s3c_gpio_card_detect_thread,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
dev_name(dev), sc) == 0) {
int status = gpio_get_value(sc->ext_cd_gpio);
if (pdata->ext_cd_gpio_invert)
@@ -419,9 +429,121 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
}
}
+#ifdef CONFIG_OF
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ struct device_node *node = dev->of_node;
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ u32 max_width;
+ int gpio, cnt, ret;
+
+ /* if the bus-width property is not specified, assume width as 1 */
+ if (of_property_read_u32(node, "bus-width", &max_width))
+ max_width = 1;
+ pdata->max_width = max_width;
+
+ ourhost->gpios = devm_kzalloc(dev, NUM_GPIOS(pdata->max_width) *
+ sizeof(int), GFP_KERNEL);
+ if (!ourhost->gpios)
+ return -ENOMEM;
+
+ /* get the card detection method */
+ if (of_get_property(node, "broken-cd", 0)) {
+ pdata->cd_type = S3C_SDHCI_CD_NONE;
+ goto setup_bus;
+ }
+
+ if (of_get_property(node, "non-removable", 0)) {
+ pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+ goto setup_bus;
+ }
+
+ gpio = of_get_named_gpio(node, "cd-gpios", 0);
+ if (gpio_is_valid(gpio)) {
+ pdata->cd_type = S3C_SDHCI_CD_GPIO;
+ goto found_cd;
+ } else if (gpio != -ENOENT) {
+ dev_err(dev, "invalid card detect gpio specified\n");
+ return -EINVAL;
+ }
+
+ gpio = of_get_named_gpio(node, "samsung,cd-pinmux-gpio", 0);
+ if (gpio_is_valid(gpio)) {
+ pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+ goto found_cd;
+ } else if (gpio != -ENOENT) {
+ dev_err(dev, "invalid card detect gpio specified\n");
+ return -EINVAL;
+ }
+
+ dev_info(dev, "assuming no card detect line available\n");
+ pdata->cd_type = S3C_SDHCI_CD_NONE;
+
+ found_cd:
+ if (pdata->cd_type == S3C_SDHCI_CD_GPIO) {
+ pdata->ext_cd_gpio = gpio;
+ ourhost->ext_cd_gpio = -1;
+ if (of_get_property(node, "cd-inverted", NULL))
+ pdata->ext_cd_gpio_invert = 1;
+ } else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ ret = gpio_request(gpio, "sdhci-cd");
+ if (ret) {
+ dev_err(dev, "card detect gpio request failed\n");
+ return -EINVAL;
+ }
+ ourhost->ext_cd_gpio = gpio;
+ }
+
+ setup_bus:
+ /* get the gpios for command, clock and data lines */
+ for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+ gpio = of_get_gpio(node, cnt);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "invalid gpio[%d]\n", cnt);
+ goto err_free_dt_cd_gpio;
+ }
+ ourhost->gpios[cnt] = gpio;
+ }
+
+ for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
+ ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
+ if (ret) {
+ dev_err(dev, "gpio[%d] request failed\n", cnt);
+ goto err_free_dt_gpios;
+ }
+ }
+
+ return 0;
+
+ err_free_dt_gpios:
+ while (--cnt >= 0)
+ gpio_free(ourhost->gpios[cnt]);
+ err_free_dt_cd_gpio:
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+ gpio_free(ourhost->ext_cd_gpio);
+ return -EINVAL;
+}
+#else
+static int __devinit sdhci_s3c_parse_dt(struct device *dev,
+ struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+ return -EINVAL;
+}
+#endif
+
+static const struct of_device_id sdhci_s3c_dt_match[];
+
static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
struct platform_device *pdev)
{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
+ return (struct sdhci_s3c_drv_data *)match->data;
+ }
+#endif
return (struct sdhci_s3c_drv_data *)
platform_get_device_id(pdev)->driver_data;
}
@@ -436,7 +558,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
struct resource *res;
int ret, irq, ptr, clks;
- if (!pdev->dev.platform_data) {
+ if (!pdev->dev.platform_data && !pdev->dev.of_node) {
dev_err(dev, "no device data specified\n");
return -ENOENT;
}
@@ -452,21 +574,28 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
dev_err(dev, "sdhci_alloc_host() failed\n");
return PTR_ERR(host);
}
+ sc = sdhci_priv(host);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
- goto err_io_clk;
+ goto err_pdata;
+ }
+
+ if (pdev->dev.of_node) {
+ ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+ if (ret)
+ goto err_pdata;
+ } else {
+ memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+ sc->ext_cd_gpio = -1; /* invalid gpio number */
}
- memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
drv_data = sdhci_s3c_get_driver_data(pdev);
- sc = sdhci_priv(host);
sc->host = host;
sc->pdev = pdev;
sc->pdata = pdata;
- sc->ext_cd_gpio = -1; /* invalid gpio number */
platform_set_drvdata(pdev, host);
@@ -486,9 +615,8 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
snprintf(name, 14, "mmc_busclk.%d", ptr);
clk = clk_get(dev, name);
- if (IS_ERR(clk)) {
+ if (IS_ERR(clk))
continue;
- }
clks++;
sc->clk_bus[ptr] = clk;
@@ -499,8 +627,6 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
*/
sc->cur_clk = ptr;
- clk_enable(clk);
-
dev_info(dev, "clock source %d: %s (%ld Hz)\n",
ptr, name, clk_get_rate(clk));
}
@@ -511,6 +637,10 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
goto err_no_busclks;
}
+#ifndef CONFIG_PM_RUNTIME
+ clk_enable(sc->clk_bus[sc->cur_clk]);
+#endif
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
if (!host->ioaddr) {
@@ -616,12 +746,17 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
gpio_is_valid(pdata->ext_cd_gpio))
sdhci_s3c_setup_card_detect_gpio(sc);
+#ifdef CONFIG_PM_RUNTIME
+ clk_disable(sc->clk_io);
+#endif
return 0;
err_req_regs:
+#ifndef CONFIG_PM_RUNTIME
+ clk_disable(sc->clk_bus[sc->cur_clk]);
+#endif
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
- clk_disable(sc->clk_bus[ptr]);
clk_put(sc->clk_bus[ptr]);
}
}
@@ -631,6 +766,12 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
clk_put(sc->clk_io);
err_io_clk:
+ for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+ gpio_free(sc->gpios[ptr]);
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
+ gpio_free(sc->ext_cd_gpio);
+
+ err_pdata:
sdhci_free_host(host);
return ret;
@@ -638,9 +779,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
{
- struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_s3c *sc = sdhci_priv(host);
+ struct s3c_sdhci_platdata *pdata = sc->pdata;
int ptr;
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
@@ -652,19 +793,30 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
if (gpio_is_valid(sc->ext_cd_gpio))
gpio_free(sc->ext_cd_gpio);
+#ifdef CONFIG_PM_RUNTIME
+ clk_enable(sc->clk_io);
+#endif
sdhci_remove_host(host, 1);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- for (ptr = 0; ptr < 3; ptr++) {
+#ifndef CONFIG_PM_RUNTIME
+ clk_disable(sc->clk_bus[sc->cur_clk]);
+#endif
+ for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
- clk_disable(sc->clk_bus[ptr]);
clk_put(sc->clk_bus[ptr]);
}
}
clk_disable(sc->clk_io);
clk_put(sc->clk_io);
+ if (pdev->dev.of_node) {
+ for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
+ gpio_free(sc->gpios[ptr]);
+ }
+
sdhci_free_host(host);
platform_set_drvdata(pdev, NULL);
@@ -691,15 +843,28 @@ static int sdhci_s3c_resume(struct device *dev)
static int sdhci_s3c_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct clk *busclk = ourhost->clk_io;
+ int ret;
+
+ ret = sdhci_runtime_suspend_host(host);
- return sdhci_runtime_suspend_host(host);
+ clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_disable(busclk);
+ return ret;
}
static int sdhci_s3c_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_s3c *ourhost = to_s3c(host);
+ struct clk *busclk = ourhost->clk_io;
+ int ret;
- return sdhci_runtime_resume_host(host);
+ clk_enable(busclk);
+ clk_enable(ourhost->clk_bus[ourhost->cur_clk]);
+ ret = sdhci_runtime_resume_host(host);
+ return ret;
}
#endif
@@ -737,6 +902,16 @@ static struct platform_device_id sdhci_s3c_driver_ids[] = {
};
MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+ { .compatible = "samsung,s3c6410-sdhci", },
+ { .compatible = "samsung,exynos4210-sdhci",
+ .data = (void *)EXYNOS4_SDHCI_DRV_DATA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#endif
+
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
.remove = __devexit_p(sdhci_s3c_remove),
@@ -744,6 +919,7 @@ static struct platform_driver sdhci_s3c_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
+ .of_match_table = of_match_ptr(sdhci_s3c_dt_match),
.pm = SDHCI_S3C_PMOPS,
},
};
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 423da81..6be89c0 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -20,6 +20,8 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -68,8 +70,42 @@ static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static struct sdhci_plat_data * __devinit
+sdhci_probe_config_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sdhci_plat_data *pdata = NULL;
+ int cd_gpio;
+
+ cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
+ if (!gpio_is_valid(cd_gpio))
+ cd_gpio = -1;
+
+ /* If pdata is required */
+ if (cd_gpio != -1) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "DT: kzalloc failed\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ }
+
+ pdata->card_int_gpio = cd_gpio;
+
+ return pdata;
+}
+#else
+static struct sdhci_plat_data * __devinit
+sdhci_probe_config_dt(struct platform_device *pdev)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
static int __devinit sdhci_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host;
struct resource *iomem;
struct spear_sdhci *sdhci;
@@ -104,14 +140,22 @@ static int __devinit sdhci_probe(struct platform_device *pdev)
goto err;
}
- ret = clk_enable(sdhci->clk);
+ ret = clk_prepare_enable(sdhci->clk);
if (ret) {
dev_dbg(&pdev->dev, "Error enabling clock\n");
goto put_clk;
}
- /* overwrite platform_data */
- sdhci->data = dev_get_platdata(&pdev->dev);
+ if (np) {
+ sdhci->data = sdhci_probe_config_dt(pdev);
+ if (IS_ERR(sdhci->data)) {
+ dev_err(&pdev->dev, "DT: Failed to get pdata\n");
+ return -ENODEV;
+ }
+ } else {
+ sdhci->data = dev_get_platdata(&pdev->dev);
+ }
+
pdev->dev.platform_data = sdhci;
if (pdev->dev.parent)
@@ -216,7 +260,7 @@ set_drvdata:
free_host:
sdhci_free_host(host);
disable_clk:
- clk_disable(sdhci->clk);
+ clk_disable_unprepare(sdhci->clk);
put_clk:
clk_put(sdhci->clk);
err:
@@ -238,7 +282,7 @@ static int __devexit sdhci_remove(struct platform_device *pdev)
sdhci_remove_host(host, dead);
sdhci_free_host(host);
- clk_disable(sdhci->clk);
+ clk_disable_unprepare(sdhci->clk);
clk_put(sdhci->clk);
return 0;
@@ -253,7 +297,7 @@ static int sdhci_suspend(struct device *dev)
ret = sdhci_suspend_host(host);
if (!ret)
- clk_disable(sdhci->clk);
+ clk_disable_unprepare(sdhci->clk);
return ret;
}
@@ -264,7 +308,7 @@ static int sdhci_resume(struct device *dev)
struct spear_sdhci *sdhci = dev_get_platdata(dev);
int ret;
- ret = clk_enable(sdhci->clk);
+ ret = clk_prepare_enable(sdhci->clk);
if (ret) {
dev_dbg(dev, "Resume: Error enabling clock\n");
return ret;
@@ -276,11 +320,20 @@ static int sdhci_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
+#ifdef CONFIG_OF
+static const struct of_device_id sdhci_spear_id_table[] = {
+ { .compatible = "st,spear300-sdhci" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
+#endif
+
static struct platform_driver sdhci_driver = {
.driver = {
.name = "sdhci",
.owner = THIS_MODULE,
.pm = &sdhci_pm_ops,
+ .of_match_table = of_match_ptr(sdhci_spear_id_table),
},
.probe = sdhci_probe,
.remove = __devexit_p(sdhci_remove),
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index d43e746..f9eb916 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -27,7 +27,6 @@
#include <asm/gpio.h>
-#include <mach/gpio-tegra.h>
#include <linux/platform_data/mmc-sdhci-tegra.h>
#include "sdhci-pltfm.h"
@@ -257,10 +256,9 @@ static int __devinit sdhci_tegra_probe(struct platform_device *pdev)
int rc;
match = of_match_device(sdhci_tegra_dt_match, &pdev->dev);
- if (match)
- soc_data = match->data;
- else
- soc_data = &soc_data_tegra20;
+ if (!match)
+ return -EINVAL;
+ soc_data = match->data;
host = sdhci_pltfm_init(pdev, soc_data->pdata);
if (IS_ERR(host))
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9a11dc3..7922adb 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -28,6 +28,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
#include "sdhci.h"
@@ -1293,6 +1294,13 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT;
+ /* If we're using a cd-gpio, testing the presence bit might fail. */
+ if (!present) {
+ int ret = mmc_gpio_get_cd(host->mmc);
+ if (ret > 0)
+ present = true;
+ }
+
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
@@ -1597,57 +1605,65 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
spin_unlock_irqrestore(&host->lock, flags);
}
-static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
- struct mmc_ios *ios)
+static int sdhci_do_3_3v_signal_voltage_switch(struct sdhci_host *host,
+ u16 ctrl)
{
- u8 pwr;
- u16 clk, ctrl;
- u32 present_state;
+ int ret;
- /*
- * Signal Voltage Switching is only applicable for Host Controllers
- * v3.00 and above.
- */
- if (host->version < SDHCI_SPEC_300)
- return 0;
+ /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
+ ctrl &= ~SDHCI_CTRL_VDD_180;
+ sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
- /*
- * We first check whether the request is to set signalling voltage
- * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
- */
+ if (host->vqmmc) {
+ ret = regulator_set_voltage(host->vqmmc, 3300000, 3300000);
+ if (ret) {
+ pr_warning("%s: Switching to 3.3V signalling voltage "
+ " failed\n", mmc_hostname(host->mmc));
+ return -EIO;
+ }
+ }
+ /* Wait for 5ms */
+ usleep_range(5000, 5500);
+
+ /* 3.3V regulator output should be stable within 5 ms */
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
- /* Set 1.8V Signal Enable in the Host Control2 register to 0 */
- ctrl &= ~SDHCI_CTRL_VDD_180;
- sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_VDD_180))
+ return 0;
- /* Wait for 5ms */
- usleep_range(5000, 5500);
+ pr_warning("%s: 3.3V regulator output did not became stable\n",
+ mmc_hostname(host->mmc));
- /* 3.3V regulator output should be stable within 5 ms */
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
- if (!(ctrl & SDHCI_CTRL_VDD_180))
- return 0;
- else {
- pr_info(DRIVER_NAME ": Switching to 3.3V "
- "signalling voltage failed\n");
- return -EIO;
- }
- } else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
- (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)) {
- /* Stop SDCLK */
- clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
- clk &= ~SDHCI_CLOCK_CARD_EN;
- sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ return -EIO;
+}
- /* Check whether DAT[3:0] is 0000 */
- present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
- if (!((present_state & SDHCI_DATA_LVL_MASK) >>
- SDHCI_DATA_LVL_SHIFT)) {
- /*
- * Enable 1.8V Signal Enable in the Host Control2
- * register
- */
+static int sdhci_do_1_8v_signal_voltage_switch(struct sdhci_host *host,
+ u16 ctrl)
+{
+ u8 pwr;
+ u16 clk;
+ u32 present_state;
+ int ret;
+
+ /* Stop SDCLK */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Check whether DAT[3:0] is 0000 */
+ present_state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ if (!((present_state & SDHCI_DATA_LVL_MASK) >>
+ SDHCI_DATA_LVL_SHIFT)) {
+ /*
+ * Enable 1.8V Signal Enable in the Host Control2
+ * register
+ */
+ if (host->vqmmc)
+ ret = regulator_set_voltage(host->vqmmc,
+ 1800000, 1800000);
+ else
+ ret = 0;
+
+ if (!ret) {
ctrl |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
@@ -1656,7 +1672,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (ctrl & SDHCI_CTRL_VDD_180) {
- /* Provide SDCLK again and wait for 1ms*/
+ /* Provide SDCLK again and wait for 1ms */
clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
clk |= SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
@@ -1673,29 +1689,55 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
return 0;
}
}
+ }
- /*
- * If we are here, that means the switch to 1.8V signaling
- * failed. We power cycle the card, and retry initialization
- * sequence by setting S18R to 0.
- */
- pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
- pwr &= ~SDHCI_POWER_ON;
- sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- if (host->vmmc)
- regulator_disable(host->vmmc);
+ /*
+ * If we are here, that means the switch to 1.8V signaling
+ * failed. We power cycle the card, and retry initialization
+ * sequence by setting S18R to 0.
+ */
+ pwr = sdhci_readb(host, SDHCI_POWER_CONTROL);
+ pwr &= ~SDHCI_POWER_ON;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ if (host->vmmc)
+ regulator_disable(host->vmmc);
- /* Wait for 1ms as per the spec */
- usleep_range(1000, 1500);
- pwr |= SDHCI_POWER_ON;
- sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- if (host->vmmc)
- regulator_enable(host->vmmc);
+ /* Wait for 1ms as per the spec */
+ usleep_range(1000, 1500);
+ pwr |= SDHCI_POWER_ON;
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ if (host->vmmc)
+ regulator_enable(host->vmmc);
- pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
- "voltage failed, retrying with S18R set to 0\n");
- return -EAGAIN;
- } else
+ pr_warning("%s: Switching to 1.8V signalling voltage failed, "
+ "retrying with S18R set to 0\n", mmc_hostname(host->mmc));
+
+ return -EAGAIN;
+}
+
+static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
+ struct mmc_ios *ios)
+{
+ u16 ctrl;
+
+ /*
+ * Signal Voltage Switching is only applicable for Host Controllers
+ * v3.00 and above.
+ */
+ if (host->version < SDHCI_SPEC_300)
+ return 0;
+
+ /*
+ * We first check whether the request is to set signalling voltage
+ * to 3.3V. If so, we change the voltage to 3.3V and return quickly.
+ */
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ return sdhci_do_3_3v_signal_voltage_switch(host, ctrl);
+ else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
+ (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180))
+ return sdhci_do_1_8v_signal_voltage_switch(host, ctrl);
+ else
/* No signal voltage switch required */
return 0;
}
@@ -2802,6 +2844,18 @@ int sdhci_add_host(struct sdhci_host *host)
!(host->mmc->caps & MMC_CAP_NONREMOVABLE))
mmc->caps |= MMC_CAP_NEEDS_POLL;
+ /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
+ host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
+ if (IS_ERR(host->vqmmc)) {
+ pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
+ host->vqmmc = NULL;
+ }
+ else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
+ regulator_enable(host->vqmmc);
+ else
+ caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50);
+
/* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
SDHCI_SUPPORT_DDR50))
@@ -2832,15 +2886,6 @@ int sdhci_add_host(struct sdhci_host *host)
if (caps[1] & SDHCI_DRIVER_TYPE_D)
mmc->caps |= MMC_CAP_DRIVER_TYPE_D;
- /*
- * If Power Off Notify capability is enabled by the host,
- * set notify to short power off notify timeout value.
- */
- if (mmc->caps2 & MMC_CAP2_POWEROFF_NOTIFY)
- mmc->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
- else
- mmc->power_notify_type = MMC_HOST_PW_NOTIFY_NONE;
-
/* Initial value for re-tuning timer count */
host->tuning_count = (caps[1] & SDHCI_RETUNING_TIMER_COUNT_MASK) >>
SDHCI_RETUNING_TIMER_COUNT_SHIFT;
@@ -2862,7 +2907,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (IS_ERR(host->vmmc)) {
pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
host->vmmc = NULL;
- }
+ } else
+ regulator_enable(host->vmmc);
#ifdef CONFIG_REGULATOR
if (host->vmmc) {
@@ -3119,8 +3165,15 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
- if (host->vmmc)
+ if (host->vmmc) {
+ regulator_disable(host->vmmc);
regulator_put(host->vmmc);
+ }
+
+ if (host->vqmmc) {
+ regulator_disable(host->vqmmc);
+ regulator_put(host->vqmmc);
+ }
kfree(host->adma_desc);
kfree(host->align_buffer);
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 5d81427..11d2bc3 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1213,7 +1213,9 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_BUFRE);
sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
} else if (state & INT_DTRANE) {
- sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~INT_DTRANE);
+ sh_mmcif_writel(host->addr, MMCIF_CE_INT,
+ ~(INT_CMD12DRE | INT_CMD12RBE |
+ INT_CMD12CRE | INT_DTRANE));
sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
} else if (state & INT_CMD12RBE) {
sh_mmcif_writel(host->addr, MMCIF_CE_INT,
@@ -1229,6 +1231,10 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
host->sd_error = true;
dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
}
+ if (host->state == STATE_IDLE) {
+ dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state);
+ return IRQ_HANDLED;
+ }
if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) {
if (!host->dma_active)
return IRQ_WAKE_THREAD;
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 4b83c43..f18bece 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1337,21 +1337,7 @@ static struct pci_driver via_sd_driver = {
.resume = via_sd_resume,
};
-static int __init via_sd_drv_init(void)
-{
- pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
- "(C) 2008 VIA Technologies, Inc.\n");
-
- return pci_register_driver(&via_sd_driver);
-}
-
-static void __exit via_sd_drv_exit(void)
-{
- pci_unregister_driver(&via_sd_driver);
-}
-
-module_init(via_sd_drv_init);
-module_exit(via_sd_drv_exit);
+module_pci_driver(via_sd_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("VIA Technologies Inc.");
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 58eab9a..d5655a6 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2358,9 +2358,9 @@ error5:
* which is contained at the end of struct mmc
*/
error4:
- usb_free_urb(command_out_urb);
-error1:
usb_free_urb(command_res_urb);
+error1:
+ usb_free_urb(command_out_urb);
error0:
return retval;
}
OpenPOWER on IntegriCloud