diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-st.c')
-rw-r--r-- | drivers/mmc/host/sdhci-st.c | 88 |
1 files changed, 88 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index 1fbea9a..10989ed 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -138,6 +138,87 @@ static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) ioaddr + ST_TOP_MMC_TX_CLK_DLY); } +/** + * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. + * @np: dt device node. + * @host: sdhci host + * Description: this function is to configure the Arasan host controller. + * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated + * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 + * or eMMC4.3. This has to be done before registering the sdhci host. + */ +static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct mmc_host *mhost = host->mmc; + u32 cconf2, cconf3, cconf4, cconf5; + + if (!of_device_is_compatible(np, "st,sdhci-stih407")) + return; + + cconf2 = ST_MMC_CCONFIG_2_DEFAULT; + cconf3 = ST_MMC_CCONFIG_3_DEFAULT; + cconf4 = ST_MMC_CCONFIG_4_DEFAULT; + cconf5 = ST_MMC_CCONFIG_5_DEFAULT; + + writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, + host->ioaddr + ST_MMC_CCONFIG_REG_1); + + /* Set clock frequency, default to 50MHz if max-frequency is not + * provided */ + + switch (mhost->f_max) { + case 200000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_200; + break; + case 100000000: + clk_set_rate(pltfm_host->clk, mhost->f_max); + cconf2 |= BASE_CLK_FREQ_100; + break; + default: + clk_set_rate(pltfm_host->clk, 50000000); + cconf2 |= BASE_CLK_FREQ_50; + } + + writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); + + if (mhost->caps & MMC_CAP_NONREMOVABLE) + cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; + else + /* CARD _D ET_CTRL */ + writel_relaxed(ST_MMC_GP_OUTPUT_CD, + host->ioaddr + ST_MMC_GP_OUTPUT); + + if (mhost->caps & MMC_CAP_UHS_SDR50) { + /* use 1.8V */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR50; + /* Use tuning */ + cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_SDR104) { + /* + * SDR104 implies the HC can support HS200 mode, so + * it's mandatory to use 1.8V + */ + cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; + cconf4 |= ST_MMC_CCONFIG_SDR104; + /* Max timeout for retuning */ + cconf5 |= RETUNING_TIMER_CNT_MAX; + } + + if (mhost->caps & MMC_CAP_UHS_DDR50) + cconf4 |= ST_MMC_CCONFIG_DDR50; + + writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); + writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); + writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); +} + static inline void st_mmcss_set_dll(void __iomem *ioaddr) { if (!ioaddr) @@ -214,6 +295,7 @@ static const struct sdhci_pltfm_data sdhci_st_pdata = { static int sdhci_st_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct sdhci_host *host; struct st_mmc_platform_data *pdata; struct sdhci_pltfm_host *pltfm_host; @@ -266,6 +348,9 @@ static int sdhci_st_probe(struct platform_device *pdev) pltfm_host->priv = pdata; pltfm_host->clk = clk; + /* Configure the Arasan HC inside the flashSS */ + st_mmcss_cconfig(np, host); + ret = sdhci_add_host(host); if (ret) { dev_err(&pdev->dev, "Failed sdhci_add_host\n"); @@ -333,12 +418,15 @@ static int sdhci_st_resume(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = pltfm_host->priv; + struct device_node *np = dev->of_node; clk_prepare_enable(pltfm_host->clk); if (pdata->rstc) reset_control_deassert(pdata->rstc); + st_mmcss_cconfig(np, host); + return sdhci_resume_host(host); } #endif |