1 files changed, 94 insertions, 62 deletions

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 4917af9..840b301 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -26,7 +26,6 @@
 #include <linux/amba/mmci.h>
 #include <linux/regulator/consumer.h>
 
-#include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -37,12 +36,39 @@
 
 static unsigned int fmax = 515633;
 
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ */
+struct variant_data {
+	unsigned int		clkreg;
+	unsigned int		clkreg_enable;
+	unsigned int		datalength_bits;
+};
+
+static struct variant_data variant_arm = {
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_u300 = {
+	.clkreg_enable		= 1 << 13, /* HWFCEN */
+	.datalength_bits	= 16,
+};
+
+static struct variant_data variant_ux500 = {
+	.clkreg			= MCI_CLK_ENABLE,
+	.clkreg_enable		= 1 << 14, /* HWFCEN */
+	.datalength_bits	= 24,
+};
 /*
  * This must be called with host->lock held
  */
 static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 {
-	u32 clk = 0;
+	struct variant_data *variant = host->variant;
+	u32 clk = variant->clkreg;
 
 	if (desired) {
 		if (desired >= host->mclk) {
@@ -54,8 +80,8 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == AMBA_VENDOR_ST)
-			clk |= MCI_ST_FCEN; /* Bug fix in ST IP block */
+
+		clk |= variant->clkreg_enable;
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
 		/* clk |= MCI_CLK_PWRSAVE; */
@@ -98,6 +124,18 @@ static void mmci_stop_data(struct mmci_host *host)
 	host->data = NULL;
 }
 
+static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
+{
+	unsigned int flags = SG_MITER_ATOMIC;
+
+	if (data->flags & MMC_DATA_READ)
+		flags |= SG_MITER_TO_SG;
+	else
+		flags |= SG_MITER_FROM_SG;
+
+	sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+}
+
 static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 {
 	unsigned int datactrl, timeout, irqmask;
@@ -109,7 +147,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 		data->blksz, data->blocks, data->flags);
 
 	host->data = data;
-	host->size = data->blksz;
+	host->size = data->blksz * data->blocks;
 	host->data_xfered = 0;
 
 	mmci_init_sg(host, data);
@@ -210,8 +248,17 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		 * We hit an error condition.  Ensure that any data
 		 * partially written to a page is properly coherent.
 		 */
-		if (host->sg_len && data->flags & MMC_DATA_READ)
-			flush_dcache_page(sg_page(host->sg_ptr));
+		if (data->flags & MMC_DATA_READ) {
+			struct sg_mapping_iter *sg_miter = &host->sg_miter;
+			unsigned long flags;
+
+			local_irq_save(flags);
+			if (sg_miter_next(sg_miter)) {
+				flush_dcache_page(sg_miter->page);
+				sg_miter_stop(sg_miter);
+			}
+			local_irq_restore(flags);
+		}
 	}
 	if (status & MCI_DATAEND) {
 		mmci_stop_data(host);
@@ -314,15 +361,18 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
 static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 {
 	struct mmci_host *host = dev_id;
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
 	void __iomem *base = host->base;
+	unsigned long flags;
 	u32 status;
 
 	status = readl(base + MMCISTATUS);
 
 	dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status);
 
+	local_irq_save(flags);
+
 	do {
-		unsigned long flags;
 		unsigned int remain, len;
 		char *buffer;
 
@@ -336,11 +386,11 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 		if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
 			break;
 
-		/*
-		 * Map the current scatter buffer.
-		 */
-		buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
-		remain = host->sg_ptr->length - host->sg_off;
+		if (!sg_miter_next(sg_miter))
+			break;
+
+		buffer = sg_miter->addr;
+		remain = sg_miter->length;
 
 		len = 0;
 		if (status & MCI_RXACTIVE)
@@ -348,31 +398,24 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 		if (status & MCI_TXACTIVE)
 			len = mmci_pio_write(host, buffer, remain, status);
 
-		/*
-		 * Unmap the buffer.
-		 */
-		mmci_kunmap_atomic(host, buffer, &flags);
+		sg_miter->consumed = len;
 
-		host->sg_off += len;
 		host->size -= len;
 		remain -= len;
 
 		if (remain)
 			break;
 
-		/*
-		 * If we were reading, and we have completed this
-		 * page, ensure that the data cache is coherent.
-		 */
 		if (status & MCI_RXACTIVE)
-			flush_dcache_page(sg_page(host->sg_ptr));
-
-		if (!mmci_next_sg(host))
-			break;
+			flush_dcache_page(sg_miter->page);
 
 		status = readl(base + MMCISTATUS);
 	} while (1);
 
+	sg_miter_stop(sg_miter);
+
+	local_irq_restore(flags);
+
 	/*
 	 * If we're nearing the end of the read, switch to
 	 * "any data available" mode.
@@ -477,16 +520,9 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			/* This implicitly enables the regulator */
 			mmc_regulator_set_ocr(host->vcc, ios->vdd);
 #endif
-		/*
-		 * The translate_vdd function is not used if you have
-		 * an external regulator, or your design is really weird.
-		 * Using it would mean sending in power control BOTH using
-		 * a regulator AND the 4 MMCIPWR bits. If we don't have
-		 * a regulator, we might have some other platform specific
-		 * power control behind this translate function.
-		 */
-		if (!host->vcc && host->plat->translate_vdd)
-			pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+		if (host->plat->vdd_handler)
+			pwr |= host->plat->vdd_handler(mmc_dev(mmc), ios->vdd,
+						       ios->power_mode);
 		/* The ST version does not have this, fall through to POWER_ON */
 		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
@@ -539,9 +575,13 @@ static int mmci_get_cd(struct mmc_host *mmc)
 	if (host->gpio_cd == -ENOSYS)
 		status = host->plat->status(mmc_dev(host->mmc));
 	else
-		status = gpio_get_value(host->gpio_cd);
+		status = !gpio_get_value(host->gpio_cd);
 
-	return !status;
+	/*
+	 * Use positive logic throughout - status is zero for no card,
+	 * non-zero for card inserted.
+	 */
+	return status;
 }
 
 static const struct mmc_host_ops mmci_ops = {
@@ -551,21 +591,10 @@ static const struct mmc_host_ops mmci_ops = {
 	.get_cd		= mmci_get_cd,
 };
 
-static void mmci_check_status(unsigned long data)
-{
-	struct mmci_host *host = (struct mmci_host *)data;
-	unsigned int status = mmci_get_cd(host->mmc);
-
-	if (status ^ host->oldstat)
-		mmc_detect_change(host->mmc, 0);
-
-	host->oldstat = status;
-	mod_timer(&host->timer, jiffies + HZ);
-}
-
 static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct mmci_platform_data *plat = dev->dev.platform_data;
+	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
@@ -609,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		goto clk_free;
 
 	host->plat = plat;
+	host->variant = variant;
 	host->mclk = clk_get_rate(host->clk);
 	/*
 	 * According to the spec, mclk is max 100 MHz,
@@ -669,6 +699,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	if (host->vcc == NULL)
 		mmc->ocr_avail = plat->ocr_mask;
 	mmc->caps = plat->capabilities;
+	mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	/*
 	 * We can do SGIO
@@ -677,10 +708,11 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	mmc->max_phys_segs = NR_SG;
 
 	/*
-	 * Since we only have a 16-bit data length register, we must
-	 * ensure that we don't exceed 2^16-1 bytes in a single request.
+	 * Since only a certain number of bits are valid in the data length
+	 * register, we must ensure that we don't exceed 2^num-1 bytes in a
+	 * single request.
 	 */
-	mmc->max_req_size = 65535;
+	mmc->max_req_size = (1 << variant->datalength_bits) - 1;
 
 	/*
 	 * Set the maximum segment size.  Since we aren't doing DMA
@@ -734,7 +766,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
-	host->oldstat = mmci_get_cd(host->mmc);
 
 	mmc_add_host(mmc);
 
@@ -742,12 +773,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
 		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
 
-	init_timer(&host->timer);
-	host->timer.data = (unsigned long)host;
-	host->timer.function = mmci_check_status;
-	host->timer.expires = jiffies + HZ;
-	add_timer(&host->timer);
-
 	return 0;
 
  irq0_free:
@@ -781,8 +806,6 @@ static int __devexit mmci_remove(struct amba_device *dev)
 	if (mmc) {
 		struct mmci_host *host = mmc_priv(mmc);
 
-		del_timer_sync(&host->timer);
-
 		mmc_remove_host(mmc);
 
 		writel(0, host->base + MMCIMASK0);
@@ -856,19 +879,28 @@ static struct amba_id mmci_ids[] = {
 	{
 		.id	= 0x00041180,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	{
 		.id	= 0x00041181,
 		.mask	= 0x000fffff,
+		.data	= &variant_arm,
 	},
 	/* ST Micro variants */
 	{
 		.id     = 0x00180180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
 	},
 	{
 		.id     = 0x00280180,
 		.mask   = 0x00ffffff,
+		.data	= &variant_u300,
+	},
+	{
+		.id     = 0x00480180,
+		.mask   = 0x00ffffff,
+		.data	= &variant_ux500,
 	},
 	{ 0, 0 },
 };