diff options
Diffstat (limited to 'drivers/misc')
27 files changed, 10135 insertions, 308 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 982e27b..636af28 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -22,6 +22,39 @@ config ATMEL_PWM purposes including software controlled power-efficent backlights on LCD displays, motor control, and waveform generation. +config ATMEL_TCLIB + bool "Atmel AT32/AT91 Timer/Counter Library" + depends on (AVR32 || ARCH_AT91) + help + Select this if you want a library to allocate the Timer/Counter + blocks found on many Atmel processors. This facilitates using + these blocks by different drivers despite processor differences. + +config ATMEL_TCB_CLKSRC + bool "TC Block Clocksource" + depends on ATMEL_TCLIB && GENERIC_TIME + default y + help + Select this to get a high precision clocksource based on a + TC block with a 5+ MHz base clock rate. Two timer channels + are combined to make a single 32-bit timer. + + When GENERIC_CLOCKEVENTS is defined, the third timer channel + may be used as a clock event device supporting oneshot mode + (delays of up to two seconds) based on the 32 KiHz clock. + +config ATMEL_TCB_CLKSRC_BLOCK + int + depends on ATMEL_TCB_CLKSRC + prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X + default 0 + range 0 1 + help + Some chips provide more than one TC block, so you have the + choice of which one to use for the clock framework. The other + TC can be used for other purposes, such as PWM generation and + interval timing. + config IBM_ASM tristate "Device driver for IBM RSA service processor" depends on X86 && PCI && INPUT && EXPERIMENTAL @@ -107,7 +140,9 @@ config ACER_WMI depends on EXPERIMENTAL depends on ACPI depends on LEDS_CLASS + depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE + depends on SERIO_I8042 select ACPI_WMI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds @@ -126,6 +161,7 @@ config ASUS_LAPTOP depends on ACPI depends on EXPERIMENTAL && !ACPI_ASUS depends on LEDS_CLASS + depends on NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE ---help--- This is the new Linux driver for Asus laptops. It may also support some @@ -207,10 +243,13 @@ config SONYPI_COMPAT config THINKPAD_ACPI tristate "ThinkPad ACPI Laptop Extras" depends on X86 && ACPI + select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE select HWMON select NVRAM - depends on INPUT + select INPUT + select NEW_LEDS + select LEDS_CLASS ---help--- This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -310,6 +349,7 @@ config ATMEL_SSC config INTEL_MENLOW tristate "Thermal Management driver for Intel menlow platform" depends on ACPI_THERMAL + select THERMAL depends on X86 ---help--- ACPI thermal management enhancement driver on @@ -317,6 +357,19 @@ config INTEL_MENLOW If unsure, say N. +config EEEPC_LAPTOP + tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" + depends on X86 + depends on ACPI + depends on BACKLIGHT_CLASS_DEVICE + depends on HWMON + depends on EXPERIMENTAL + ---help--- + This driver supports the Fn-Fx keys on Eee PC laptops. + It also adds the ability to switch camera/wlan on/off. + + If you have an Eee PC laptop, say Y or M here. + config ENCLOSURE_SERVICES tristate "Enclosure Services" default n @@ -326,4 +379,16 @@ config ENCLOSURE_SERVICES driver (SCSI/ATA) which supports enclosures or a SCSI enclosure device (SES) to use these services. +config SGI_XP + tristate "Support communication between SGI SSIs" + depends on IA64_GENERIC || IA64_SGI_SN2 + select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + ---help--- + An SGI machine can be divided into multiple Single System + Images which act independently of each other and have + hardware based memory protection from the others. Enabling + this feature will allow for direct communication between SSIs + based on a network adapter and DMA messaging. + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 3b12f5d..1952875 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -7,9 +7,11 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_ACER_WMI) += acer-wmi.o -obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o +obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o +obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o +obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o @@ -22,3 +24,5 @@ obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o +obj-$(CONFIG_KGDB_TESTS) += kgdbts.o +obj-$(CONFIG_SGI_XP) += sgi-xp/ diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 74d12b4..dd13a37 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -219,6 +219,15 @@ static struct dmi_system_id acer_quirks[] = { }, { .callback = dmi_matched, + .ident = "Acer Aspire 3610", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3610"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, .ident = "Acer Aspire 5100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -228,6 +237,15 @@ static struct dmi_system_id acer_quirks[] = { }, { .callback = dmi_matched, + .ident = "Acer Aspire 5610", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), + }, + .driver_data = &quirk_acer_travelmate_2490, + }, + { + .callback = dmi_matched, .ident = "Acer Aspire 5630", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -761,11 +779,11 @@ enum led_brightness value) } static struct led_classdev mail_led = { - .name = "acer-mail:green", + .name = "acer-wmi::mail", .brightness_set = mail_led_set, }; -static int __init acer_led_init(struct device *dev) +static int __devinit acer_led_init(struct device *dev) { return led_classdev_register(dev, &mail_led); } @@ -798,7 +816,7 @@ static struct backlight_ops acer_bl_ops = { .update_status = update_bl_status, }; -static int __init acer_backlight_init(struct device *dev) +static int __devinit acer_backlight_init(struct device *dev) { struct backlight_device *bd; @@ -817,7 +835,7 @@ static int __init acer_backlight_init(struct device *dev) return 0; } -static void __exit acer_backlight_exit(void) +static void acer_backlight_exit(void) { backlight_device_unregister(acer_backlight_device); } @@ -1052,11 +1070,12 @@ static int __init acer_wmi_init(void) if (wmi_has_guid(WMID_GUID2) && interface) { if (ACPI_FAILURE(WMID_set_capabilities())) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "Unable to detect available WMID " + "devices\n"); return -ENODEV; } } else if (!wmi_has_guid(WMID_GUID2) && interface) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "No WMID device detection method found\n"); return -ENODEV; } @@ -1064,21 +1083,20 @@ static int __init acer_wmi_init(void) interface = &AMW0_interface; if (ACPI_FAILURE(AMW0_set_capabilities())) { - printk(ACER_ERR "Unable to detect available devices\n"); + printk(ACER_ERR "Unable to detect available AMW0 " + "devices\n"); return -ENODEV; } } - if (wmi_has_guid(AMW0_GUID1)) { - if (ACPI_FAILURE(AMW0_find_mailled())) - printk(ACER_ERR "Unable to detect mail LED\n"); - } + if (wmi_has_guid(AMW0_GUID1)) + AMW0_find_mailled(); find_quirks(); if (!interface) { - printk(ACER_ERR "No or unsupported WMI interface, unable to "); - printk(KERN_CONT "load.\n"); + printk(ACER_ERR "No or unsupported WMI interface, unable to " + "load\n"); return -ENODEV; } diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 058ccac..e171650 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -154,6 +154,7 @@ static struct platform_driver ssc_driver = { .remove = __devexit_p(ssc_remove), .driver = { .name = "ssc", + .owner = THIS_MODULE, }, }; @@ -172,3 +173,4 @@ module_exit(ssc_exit); MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ssc"); diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c index f8d3b9a..0d5ce03 100644 --- a/drivers/misc/atmel_pwm.c +++ b/drivers/misc/atmel_pwm.c @@ -407,3 +407,4 @@ module_exit(pwm_exit); MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_pwm"); diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c new file mode 100644 index 0000000..05dc8a3 --- /dev/null +++ b/drivers/misc/atmel_tclib.c @@ -0,0 +1,161 @@ +#include <linux/atmel_tc.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +/* Number of bytes to reserve for the iomem resource */ +#define ATMEL_TC_IOMEM_SIZE 256 + + +/* + * This is a thin library to solve the problem of how to portably allocate + * one of the TC blocks. For simplicity, it doesn't currently expect to + * share individual timers between different drivers. + */ + +#if defined(CONFIG_AVR32) +/* AVR32 has these divide PBB */ +const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, }; +EXPORT_SYMBOL(atmel_tc_divisors); + +#elif defined(CONFIG_ARCH_AT91) +/* AT91 has these divide MCK */ +const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, }; +EXPORT_SYMBOL(atmel_tc_divisors); + +#endif + +static DEFINE_SPINLOCK(tc_list_lock); +static LIST_HEAD(tc_list); + +/** + * atmel_tc_alloc - allocate a specified TC block + * @block: which block to allocate + * @name: name to be associated with the iomem resource + * + * Caller allocates a block. If it is available, a pointer to a + * pre-initialized struct atmel_tc is returned. The caller can access + * the registers directly through the "regs" field. + */ +struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name) +{ + struct atmel_tc *tc; + struct platform_device *pdev = NULL; + struct resource *r; + + spin_lock(&tc_list_lock); + list_for_each_entry(tc, &tc_list, node) { + if (tc->pdev->id == block) { + pdev = tc->pdev; + break; + } + } + + if (!pdev || tc->iomem) + goto fail; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name); + if (!r) + goto fail; + + tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE); + if (!tc->regs) + goto fail_ioremap; + + tc->iomem = r; + +out: + spin_unlock(&tc_list_lock); + return tc; + +fail_ioremap: + release_resource(r); +fail: + tc = NULL; + goto out; +} +EXPORT_SYMBOL_GPL(atmel_tc_alloc); + +/** + * atmel_tc_free - release a specified TC block + * @tc: Timer/counter block that was returned by atmel_tc_alloc() + * + * This reverses the effect of atmel_tc_alloc(), unmapping the I/O + * registers, invalidating the resource returned by that routine and + * making the TC available to other drivers. + */ +void atmel_tc_free(struct atmel_tc *tc) +{ + spin_lock(&tc_list_lock); + if (tc->regs) { + iounmap(tc->regs); + release_resource(tc->iomem); + tc->regs = NULL; + tc->iomem = NULL; + } + spin_unlock(&tc_list_lock); +} +EXPORT_SYMBOL_GPL(atmel_tc_free); + +static int __init tc_probe(struct platform_device *pdev) +{ + struct atmel_tc *tc; + struct clk *clk; + int irq; + + if (!platform_get_resource(pdev, IORESOURCE_MEM, 0)) + return -EINVAL; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -EINVAL; + + tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL); + if (!tc) + return -ENOMEM; + + tc->pdev = pdev; + + clk = clk_get(&pdev->dev, "t0_clk"); + if (IS_ERR(clk)) { + kfree(tc); + return -EINVAL; + } + + tc->clk[0] = clk; + tc->clk[1] = clk_get(&pdev->dev, "t1_clk"); + if (IS_ERR(tc->clk[1])) + tc->clk[1] = clk; + tc->clk[2] = clk_get(&pdev->dev, "t2_clk"); + if (IS_ERR(tc->clk[2])) + tc->clk[2] = clk; + + tc->irq[0] = irq; + tc->irq[1] = platform_get_irq(pdev, 1); + if (tc->irq[1] < 0) + tc->irq[1] = irq; + tc->irq[2] = platform_get_irq(pdev, 2); + if (tc->irq[2] < 0) + tc->irq[2] = irq; + + spin_lock(&tc_list_lock); + list_add_tail(&tc->node, &tc_list); + spin_unlock(&tc_list_lock); + + return 0; +} + +static struct platform_driver tc_driver = { + .driver.name = "atmel_tcb", +}; + +static int __init tc_init(void) +{ + return platform_driver_probe(&tc_driver, tc_probe); +} +arch_initcall(tc_init); diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c new file mode 100644 index 0000000..6d72760 --- /dev/null +++ b/drivers/misc/eeepc-laptop.c @@ -0,0 +1,666 @@ +/* + * eepc-laptop.c - Asus Eee PC extras + * + * Based on asus_acpi.c as patched for the Eee PC by Asus: + * ftp://ftp.asus.com/pub/ASUS/EeePC/701/ASUS_ACPI_071126.rar + * Based on eee.c from eeepc-linux + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <acpi/acpi_drivers.h> +#include <acpi/acpi_bus.h> +#include <linux/uaccess.h> + +#define EEEPC_LAPTOP_VERSION "0.1" + +#define EEEPC_HOTK_NAME "Eee PC Hotkey Driver" +#define EEEPC_HOTK_FILE "eeepc" +#define EEEPC_HOTK_CLASS "hotkey" +#define EEEPC_HOTK_DEVICE_NAME "Hotkey" +#define EEEPC_HOTK_HID "ASUS010" + +#define EEEPC_LOG EEEPC_HOTK_FILE ": " +#define EEEPC_ERR KERN_ERR EEEPC_LOG +#define EEEPC_WARNING KERN_WARNING EEEPC_LOG +#define EEEPC_NOTICE KERN_NOTICE EEEPC_LOG +#define EEEPC_INFO KERN_INFO EEEPC_LOG + +/* + * Definitions for Asus EeePC + */ +#define NOTIFY_WLAN_ON 0x10 +#define NOTIFY_BRN_MIN 0x20 +#define NOTIFY_BRN_MAX 0x2f + +enum { + DISABLE_ASL_WLAN = 0x0001, + DISABLE_ASL_BLUETOOTH = 0x0002, + DISABLE_ASL_IRDA = 0x0004, + DISABLE_ASL_CAMERA = 0x0008, + DISABLE_ASL_TV = 0x0010, + DISABLE_ASL_GPS = 0x0020, + DISABLE_ASL_DISPLAYSWITCH = 0x0040, + DISABLE_ASL_MODEM = 0x0080, + DISABLE_ASL_CARDREADER = 0x0100 +}; + +enum { + CM_ASL_WLAN = 0, + CM_ASL_BLUETOOTH, + CM_ASL_IRDA, + CM_ASL_1394, + CM_ASL_CAMERA, + CM_ASL_TV, + CM_ASL_GPS, + CM_ASL_DVDROM, + CM_ASL_DISPLAYSWITCH, + CM_ASL_PANELBRIGHT, + CM_ASL_BIOSFLASH, + CM_ASL_ACPIFLASH, + CM_ASL_CPUFV, + CM_ASL_CPUTEMPERATURE, + CM_ASL_FANCPU, + CM_ASL_FANCHASSIS, + CM_ASL_USBPORT1, + CM_ASL_USBPORT2, + CM_ASL_USBPORT3, + CM_ASL_MODEM, + CM_ASL_CARDREADER, + CM_ASL_LID +}; + +const char *cm_getv[] = { + "WLDG", NULL, NULL, NULL, + "CAMG", NULL, NULL, NULL, + NULL, "PBLG", NULL, NULL, + "CFVG", NULL, NULL, NULL, + "USBG", NULL, NULL, "MODG", + "CRDG", "LIDG" +}; + +const char *cm_setv[] = { + "WLDS", NULL, NULL, NULL, + "CAMS", NULL, NULL, NULL, + "SDSP", "PBLS", "HDPS", NULL, + "CFVS", NULL, NULL, NULL, + "USBG", NULL, NULL, "MODS", + "CRDS", NULL +}; + +#define EEEPC_EC "\\_SB.PCI0.SBRG.EC0." + +#define EEEPC_EC_FAN_PWM EEEPC_EC "SC02" /* Fan PWM duty cycle (%) */ +#define EEEPC_EC_SC02 0x63 +#define EEEPC_EC_FAN_HRPM EEEPC_EC "SC05" /* High byte, fan speed (RPM) */ +#define EEEPC_EC_FAN_LRPM EEEPC_EC "SC06" /* Low byte, fan speed (RPM) */ +#define EEEPC_EC_FAN_CTRL EEEPC_EC "SFB3" /* Byte containing SF25 */ +#define EEEPC_EC_SFB3 0xD3 + +/* + * This is the main structure, we can use it to store useful information + * about the hotk device + */ +struct eeepc_hotk { + struct acpi_device *device; /* the device we are in */ + acpi_handle handle; /* the handle of the hotk device */ + u32 cm_supported; /* the control methods supported + by this BIOS */ + uint init_flag; /* Init flags */ + u16 event_count[128]; /* count for each event */ +}; + +/* The actual device the driver binds to */ +static struct eeepc_hotk *ehotk; + +/* Platform device/driver */ +static struct platform_driver platform_driver = { + .driver = { + .name = EEEPC_HOTK_FILE, + .owner = THIS_MODULE, + } +}; + +static struct platform_device *platform_device; + +/* + * The hotkey driver declaration + */ +static int eeepc_hotk_add(struct acpi_device *device); +static int eeepc_hotk_remove(struct acpi_device *device, int type); + +static const struct acpi_device_id eeepc_device_ids[] = { + {EEEPC_HOTK_HID, 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); + +static struct acpi_driver eeepc_hotk_driver = { + .name = EEEPC_HOTK_NAME, + .class = EEEPC_HOTK_CLASS, + .ids = eeepc_device_ids, + .ops = { + .add = eeepc_hotk_add, + .remove = eeepc_hotk_remove, + }, +}; + +/* The backlight device /sys/class/backlight */ +static struct backlight_device *eeepc_backlight_device; + +/* The hwmon device */ +static struct device *eeepc_hwmon_device; + +/* + * The backlight class declaration + */ +static int read_brightness(struct backlight_device *bd); +static int update_bl_status(struct backlight_device *bd); +static struct backlight_ops eeepcbl_ops = { + .get_brightness = read_brightness, + .update_status = update_bl_status, +}; + +MODULE_AUTHOR("Corentin Chary, Eric Cooper"); +MODULE_DESCRIPTION(EEEPC_HOTK_NAME); +MODULE_LICENSE("GPL"); + +/* + * ACPI Helpers + */ +static int write_acpi_int(acpi_handle handle, const char *method, int val, + struct acpi_buffer *output) +{ + struct acpi_object_list params; + union acpi_object in_obj; + acpi_status status; + + params.count = 1; + params.pointer = &in_obj; + in_obj.type = ACPI_TYPE_INTEGER; + in_obj.integer.value = val; + + status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + return (status == AE_OK ? 0 : -1); +} + +static int read_acpi_int(acpi_handle handle, const char *method, int *val) +{ + acpi_status status; + ulong result; + + status = acpi_evaluate_integer(handle, (char *)method, NULL, &result); + if (ACPI_FAILURE(status)) { + *val = -1; + return -1; + } else { + *val = result; + return 0; + } +} + +static int set_acpi(int cm, int value) +{ + if (ehotk->cm_supported & (0x1 << cm)) { + const char *method = cm_setv[cm]; + if (method == NULL) + return -ENODEV; + if (write_acpi_int(ehotk->handle, method, value, NULL)) + printk(EEEPC_WARNING "Error writing %s\n", method); + } + return 0; +} + +static int get_acpi(int cm) +{ + int value = -1; + if ((ehotk->cm_supported & (0x1 << cm))) { + const char *method = cm_getv[cm]; + if (method == NULL) + return -ENODEV; + if (read_acpi_int(ehotk->handle, method, &value)) + printk(EEEPC_WARNING "Error reading %s\n", method); + } + return value; +} + +/* + * Backlight + */ +static int read_brightness(struct backlight_device *bd) +{ + return get_acpi(CM_ASL_PANELBRIGHT); +} + +static int set_brightness(struct backlight_device *bd, int value) +{ + value = max(0, min(15, value)); + return set_acpi(CM_ASL_PANELBRIGHT, value); +} + +static int update_bl_status(struct backlight_device *bd) +{ + return set_brightness(bd, bd->props.brightness); +} + +/* + * Sys helpers + */ +static int parse_arg(const char *buf, unsigned long count, int *val) +{ + if (!count) + return 0; + if (sscanf(buf, "%i", val) != 1) + return -EINVAL; + return count; +} + +static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) + set_acpi(cm, value); + return rv; +} + +static ssize_t show_sys_acpi(int cm, char *buf) +{ + return sprintf(buf, "%d\n", get_acpi(cm)); +} + +#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ + static ssize_t show_##_name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ + { \ + return show_sys_acpi(_cm, buf); \ + } \ + static ssize_t store_##_name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ + { \ + return store_sys_acpi(_cm, buf, count); \ + } \ + static struct device_attribute dev_attr_##_name = { \ + .attr = { \ + .name = __stringify(_name), \ + .mode = 0644 }, \ + .show = show_##_name, \ + .store = store_##_name, \ + } + +EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); +EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); +EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); +EEEPC_CREATE_DEVICE_ATTR(wlan, CM_ASL_WLAN); + +static struct attribute *platform_attributes[] = { + &dev_attr_camera.attr, + &dev_attr_cardr.attr, + &dev_attr_disp.attr, + &dev_attr_wlan.attr, + NULL +}; + +static struct attribute_group platform_attribute_group = { + .attrs = platform_attributes +}; + +/* + * Hotkey functions + */ +static int eeepc_hotk_check(void) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + int result; + + result = acpi_bus_get_status(ehotk->device); + if (result) + return result; + if (ehotk->device->status.present) { + if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, + &buffer)) { + printk(EEEPC_ERR "Hotkey initialization failed\n"); + return -ENODEV; + } else { + printk(EEEPC_NOTICE "Hotkey init flags 0x%x\n", + ehotk->init_flag); + } + /* get control methods supported */ + if (read_acpi_int(ehotk->handle, "CMSG" + , &ehotk->cm_supported)) { + printk(EEEPC_ERR + "Get control methods supported failed\n"); + return -ENODEV; + } else { + printk(EEEPC_INFO + "Get control methods supported: 0x%x\n", + ehotk->cm_supported); + } + } else { + printk(EEEPC_ERR "Hotkey device not present, aborting\n"); + return -EINVAL; + } + return 0; +} + +static void notify_wlan(u32 *event) +{ + /* if DISABLE_ASL_WLAN is set, the notify code for fn+f2 + will always be 0x10 */ + if (ehotk->cm_supported & (0x1 << CM_ASL_WLAN)) { + const char *method = cm_getv[CM_ASL_WLAN]; + int value; + if (read_acpi_int(ehotk->handle, method, &value)) + printk(EEEPC_WARNING "Error reading %s\n", + method); + else if (value == 1) + *event = 0x11; + } +} + +static void notify_brn(void) +{ + struct backlight_device *bd = eeepc_backlight_device; + bd->props.brightness = read_brightness(bd); +} + +static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) +{ + if (!ehotk) + return; + if (event == NOTIFY_WLAN_ON && (DISABLE_ASL_WLAN & ehotk->init_flag)) + notify_wlan(&event); + if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) + notify_brn(); + acpi_bus_generate_proc_event(ehotk->device, event, + ehotk->event_count[event % 128]++); +} + +static int eeepc_hotk_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + int result; + + if (!device) + return -EINVAL; + printk(EEEPC_NOTICE EEEPC_HOTK_NAME "\n"); + ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); + if (!ehotk) + return -ENOMEM; + ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH; + ehotk->handle = device->handle; + strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME); + strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS); + acpi_driver_data(device) = ehotk; + ehotk->device = device; + result = eeepc_hotk_check(); + if (result) + goto end; + status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, + eeepc_hotk_notify, ehotk); + if (ACPI_FAILURE(status)) + printk(EEEPC_ERR "Error installing notify handler\n"); + end: + if (result) { + kfree(ehotk); + ehotk = NULL; + } + return result; +} + +static int eeepc_hotk_remove(struct acpi_device *device, int type) +{ + acpi_status status = 0; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + status = acpi_remove_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY, + eeepc_hotk_notify); + if (ACPI_FAILURE(status)) + printk(EEEPC_ERR "Error removing notify handler\n"); + kfree(ehotk); + return 0; +} + +/* + * Hwmon + */ +static int eeepc_get_fan_pwm(void) +{ + int value = 0; + + read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value); + return (value); +} + +static void eeepc_set_fan_pwm(int value) +{ + value = SENSORS_LIMIT(value, 0, 100); + ec_write(EEEPC_EC_SC02, value); +} + +static int eeepc_get_fan_rpm(void) +{ + int high = 0; + int low = 0; + + read_acpi_int(NULL, EEEPC_EC_FAN_HRPM, &high); + read_acpi_int(NULL, EEEPC_EC_FAN_LRPM, &low); + return (high << 8 | low); +} + +static int eeepc_get_fan_ctrl(void) +{ + int value = 0; + + read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); + return ((value & 0x02 ? 1 : 0)); +} + +static void eeepc_set_fan_ctrl(int manual) +{ + int value = 0; + + read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); + if (manual) + value |= 0x02; + else + value &= ~0x02; + ec_write(EEEPC_EC_SFB3, value); +} + +static ssize_t store_sys_hwmon(void (*set)(int), const char *buf, size_t count) +{ + int rv, value; + + rv = parse_arg(buf, count, &value); + if (rv > 0) + set(value); + return rv; +} + +static ssize_t show_sys_hwmon(int (*get)(void), char *buf) +{ + return sprintf(buf, "%d\n", get()); +} + +#define EEEPC_CREATE_SENSOR_ATTR(_name, _mode, _set, _get) \ + static ssize_t show_##_name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ + { \ + return show_sys_hwmon(_set, buf); \ + } \ + static ssize_t store_##_name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ + { \ + return store_sys_hwmon(_get, buf, count); \ + } \ + static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0); + +EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL); +EEEPC_CREATE_SENSOR_ATTR(fan1_pwm, S_IRUGO | S_IWUSR, + eeepc_get_fan_pwm, eeepc_set_fan_pwm); +EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, + eeepc_get_fan_ctrl, eeepc_set_fan_ctrl); + +static struct attribute *hwmon_attributes[] = { + &sensor_dev_attr_fan1_pwm.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + NULL +}; + +static struct attribute_group hwmon_attribute_group = { + .attrs = hwmon_attributes +}; + +/* + * exit/init + */ +static void eeepc_backlight_exit(void) +{ + if (eeepc_backlight_device) + backlight_device_unregister(eeepc_backlight_device); + eeepc_backlight_device = NULL; +} + +static void eeepc_hwmon_exit(void) +{ + struct device *hwmon; + + hwmon = eeepc_hwmon_device; + if (!hwmon) + return ; + hwmon_device_unregister(hwmon); + sysfs_remove_group(&hwmon->kobj, + &hwmon_attribute_group); + eeepc_hwmon_device = NULL; +} + +static void __exit eeepc_laptop_exit(void) +{ + eeepc_backlight_exit(); + eeepc_hwmon_exit(); + acpi_bus_unregister_driver(&eeepc_hotk_driver); + sysfs_remove_group(&platform_device->dev.kobj, + &platform_attribute_group); + platform_device_unregister(platform_device); + platform_driver_unregister(&platform_driver); +} + +static int eeepc_backlight_init(struct device *dev) +{ + struct backlight_device *bd; + + bd = backlight_device_register(EEEPC_HOTK_FILE, dev, + NULL, &eeepcbl_ops); + if (IS_ERR(bd)) { + printk(EEEPC_ERR + "Could not register eeepc backlight device\n"); + eeepc_backlight_device = NULL; + return PTR_ERR(bd); + } + eeepc_backlight_device = bd; + bd->props.max_brightness = 15; + bd->props.brightness = read_brightness(NULL); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + return 0; +} + +static int eeepc_hwmon_init(struct device *dev) +{ + struct device *hwmon; + int result; + + hwmon = hwmon_device_register(dev); + if (IS_ERR(hwmon)) { + printk(EEEPC_ERR + "Could not register eeepc hwmon device\n"); + eeepc_hwmon_device = NULL; + return PTR_ERR(hwmon); + } + eeepc_hwmon_device = hwmon; + result = sysfs_create_group(&hwmon->kobj, + &hwmon_attribute_group); + if (result) + eeepc_hwmon_exit(); + return result; +} + +static int __init eeepc_laptop_init(void) +{ + struct device *dev; + int result; + + if (acpi_disabled) + return -ENODEV; + result = acpi_bus_register_driver(&eeepc_hotk_driver); + if (result < 0) + return result; + if (!ehotk) { + acpi_bus_unregister_driver(&eeepc_hotk_driver); + return -ENODEV; + } + dev = acpi_get_physical_device(ehotk->device->handle); + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + result = eeepc_hwmon_init(dev); + if (result) + goto fail_hwmon; + /* Register platform stuff */ + result = platform_driver_register(&platform_driver); + if (result) + goto fail_platform_driver; + platform_device = platform_device_alloc(EEEPC_HOTK_FILE, -1); + if (!platform_device) { + result = -ENOMEM; + goto fail_platform_device1; + } + result = platform_device_add(platform_device); + if (result) + goto fail_platform_device2; + result = sysfs_create_group(&platform_device->dev.kobj, + &platform_attribute_group); + if (result) + goto fail_sysfs; + return 0; +fail_sysfs: + platform_device_del(platform_device); +fail_platform_device2: + platform_device_put(platform_device); +fail_platform_device1: + platform_driver_unregister(&platform_driver); +fail_platform_driver: + eeepc_hwmon_exit(); +fail_hwmon: + eeepc_backlight_exit(); +fail_backlight: + return result; +} + +module_init(eeepc_laptop_init); +module_exit(eeepc_laptop_exit); diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 6fcb0e9..0736cff 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -31,7 +31,6 @@ static LIST_HEAD(container_list); static DEFINE_MUTEX(container_list_lock); static struct class enclosure_class; -static struct class enclosure_component_class; /** * enclosure_find - find an enclosure given a device @@ -40,16 +39,16 @@ static struct class enclosure_component_class; * Looks through the list of registered enclosures to see * if it can find a match for a device. Returns NULL if no * enclosure is found. Obtains a reference to the enclosure class - * device which must be released with class_device_put(). + * device which must be released with device_put(). */ struct enclosure_device *enclosure_find(struct device *dev) { - struct enclosure_device *edev = NULL; + struct enclosure_device *edev; mutex_lock(&container_list_lock); list_for_each_entry(edev, &container_list, node) { - if (edev->cdev.dev == dev) { - class_device_get(&edev->cdev); + if (edev->edev.parent == dev) { + get_device(&edev->edev); mutex_unlock(&container_list_lock); return edev; } @@ -117,11 +116,11 @@ enclosure_register(struct device *dev, const char *name, int components, edev->components = components; - edev->cdev.class = &enclosure_class; - edev->cdev.dev = get_device(dev); + edev->edev.class = &enclosure_class; + edev->edev.parent = get_device(dev); edev->cb = cb; - snprintf(edev->cdev.class_id, BUS_ID_SIZE, "%s", name); - err = class_device_register(&edev->cdev); + snprintf(edev->edev.bus_id, BUS_ID_SIZE, "%s", name); + err = device_register(&edev->edev); if (err) goto err; @@ -135,7 +134,7 @@ enclosure_register(struct device *dev, const char *name, int components, return edev; err: - put_device(edev->cdev.dev); + put_device(edev->edev.parent); kfree(edev); return ERR_PTR(err); } @@ -158,29 +157,69 @@ void enclosure_unregister(struct enclosure_device *edev) for (i = 0; i < edev->components; i++) if (edev->component[i].number != -1) - class_device_unregister(&edev->component[i].cdev); + device_unregister(&edev->component[i].cdev); /* prevent any callbacks into service user */ edev->cb = &enclosure_null_callbacks; - class_device_unregister(&edev->cdev); + device_unregister(&edev->edev); } EXPORT_SYMBOL_GPL(enclosure_unregister); -static void enclosure_release(struct class_device *cdev) +#define ENCLOSURE_NAME_SIZE 64 + +static void enclosure_link_name(struct enclosure_component *cdev, char *name) +{ + strcpy(name, "enclosure_device:"); + strcat(name, cdev->cdev.bus_id); +} + +static void enclosure_remove_links(struct enclosure_component *cdev) +{ + char name[ENCLOSURE_NAME_SIZE]; + + enclosure_link_name(cdev, name); + sysfs_remove_link(&cdev->dev->kobj, name); + sysfs_remove_link(&cdev->cdev.kobj, "device"); +} + +static int enclosure_add_links(struct enclosure_component *cdev) +{ + int error; + char name[ENCLOSURE_NAME_SIZE]; + + error = sysfs_create_link(&cdev->cdev.kobj, &cdev->dev->kobj, "device"); + if (error) + return error; + + enclosure_link_name(cdev, name); + error = sysfs_create_link(&cdev->dev->kobj, &cdev->cdev.kobj, name); + if (error) + sysfs_remove_link(&cdev->cdev.kobj, "device"); + + return error; +} + +static void enclosure_release(struct device *cdev) { struct enclosure_device *edev = to_enclosure_device(cdev); - put_device(cdev->dev); + put_device(cdev->parent); kfree(edev); } -static void enclosure_component_release(struct class_device *cdev) +static void enclosure_component_release(struct device *dev) { - if (cdev->dev) + struct enclosure_component *cdev = to_enclosure_component(dev); + + if (cdev->dev) { + enclosure_remove_links(cdev); put_device(cdev->dev); - class_device_put(cdev->parent); + } + put_device(dev->parent); } +static struct attribute_group *enclosure_groups[]; + /** * enclosure_component_register - add a particular component to an enclosure * @edev: the enclosure to add the component @@ -201,7 +240,7 @@ enclosure_component_register(struct enclosure_device *edev, const char *name) { struct enclosure_component *ecomp; - struct class_device *cdev; + struct device *cdev; int err; if (number >= edev->components) @@ -215,14 +254,16 @@ enclosure_component_register(struct enclosure_device *edev, ecomp->type = type; ecomp->number = number; cdev = &ecomp->cdev; - cdev->parent = class_device_get(&edev->cdev); - cdev->class = &enclosure_component_class; + cdev->parent = get_device(&edev->edev); if (name) - snprintf(cdev->class_id, BUS_ID_SIZE, "%s", name); + snprintf(cdev->bus_id, BUS_ID_SIZE, "%s", name); else - snprintf(cdev->class_id, BUS_ID_SIZE, "%u", number); + snprintf(cdev->bus_id, BUS_ID_SIZE, "%u", number); - err = class_device_register(cdev); + cdev->release = enclosure_component_release; + cdev->groups = enclosure_groups; + + err = device_register(cdev); if (err) ERR_PTR(err); @@ -247,18 +288,19 @@ EXPORT_SYMBOL_GPL(enclosure_component_register); int enclosure_add_device(struct enclosure_device *edev, int component, struct device *dev) { - struct class_device *cdev; + struct enclosure_component *cdev; if (!edev || component >= edev->components) return -EINVAL; - cdev = &edev->component[component].cdev; + cdev = &edev->component[component]; - class_device_del(cdev); if (cdev->dev) - put_device(cdev->dev); + enclosure_remove_links(cdev); + + put_device(cdev->dev); cdev->dev = get_device(dev); - return class_device_add(cdev); + return enclosure_add_links(cdev); } EXPORT_SYMBOL_GPL(enclosure_add_device); @@ -272,18 +314,17 @@ EXPORT_SYMBOL_GPL(enclosure_add_device); */ int enclosure_remove_device(struct enclosure_device *edev, int component) { - struct class_device *cdev; + struct enclosure_component *cdev; if (!edev || component >= edev->components) return -EINVAL; - cdev = &edev->component[component].cdev; + cdev = &edev->component[component]; - class_device_del(cdev); - if (cdev->dev) - put_device(cdev->dev); + device_del(&cdev->cdev); + put_device(cdev->dev); cdev->dev = NULL; - return class_device_add(cdev); + return device_add(&cdev->cdev); } EXPORT_SYMBOL_GPL(enclosure_remove_device); @@ -291,14 +332,16 @@ EXPORT_SYMBOL_GPL(enclosure_remove_device); * sysfs pieces below */ -static ssize_t enclosure_show_components(struct class_device *cdev, char *buf) +static ssize_t enclosure_show_components(struct device *cdev, + struct device_attribute *attr, + char *buf) { struct enclosure_device *edev = to_enclosure_device(cdev); return snprintf(buf, 40, "%d\n", edev->components); } -static struct class_device_attribute enclosure_attrs[] = { +static struct device_attribute enclosure_attrs[] = { __ATTR(components, S_IRUGO, enclosure_show_components, NULL), __ATTR_NULL }; @@ -306,8 +349,8 @@ static struct class_device_attribute enclosure_attrs[] = { static struct class enclosure_class = { .name = "enclosure", .owner = THIS_MODULE, - .release = enclosure_release, - .class_dev_attrs = enclosure_attrs, + .dev_release = enclosure_release, + .dev_attrs = enclosure_attrs, }; static const char *const enclosure_status [] = { @@ -326,7 +369,8 @@ static const char *const enclosure_type [] = { [ENCLOSURE_COMPONENT_ARRAY_DEVICE] = "array device", }; -static ssize_t get_component_fault(struct class_device *cdev, char *buf) +static ssize_t get_component_fault(struct device *cdev, + struct device_attribute *attr, char *buf) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -336,8 +380,9 @@ static ssize_t get_component_fault(struct class_device *cdev, char *buf) return snprintf(buf, 40, "%d\n", ecomp->fault); } -static ssize_t set_component_fault(struct class_device *cdev, const char *buf, - size_t count) +static ssize_t set_component_fault(struct device *cdev, + struct device_attribute *attr, + const char *buf, size_t count) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -348,7 +393,8 @@ static ssize_t set_component_fault(struct class_device *cdev, const char *buf, return count; } -static ssize_t get_component_status(struct class_device *cdev, char *buf) +static ssize_t get_component_status(struct device *cdev, + struct device_attribute *attr,char *buf) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -358,8 +404,9 @@ static ssize_t get_component_status(struct class_device *cdev, char *buf) return snprintf(buf, 40, "%s\n", enclosure_status[ecomp->status]); } -static ssize_t set_component_status(struct class_device *cdev, const char *buf, - size_t count) +static ssize_t set_component_status(struct device *cdev, + struct device_attribute *attr, + const char *buf, size_t count) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -380,7 +427,8 @@ static ssize_t set_component_status(struct class_device *cdev, const char *buf, return -EINVAL; } -static ssize_t get_component_active(struct class_device *cdev, char *buf) +static ssize_t get_component_active(struct device *cdev, + struct device_attribute *attr, char *buf) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -390,8 +438,9 @@ static ssize_t get_component_active(struct class_device *cdev, char *buf) return snprintf(buf, 40, "%d\n", ecomp->active); } -static ssize_t set_component_active(struct class_device *cdev, const char *buf, - size_t count) +static ssize_t set_component_active(struct device *cdev, + struct device_attribute *attr, + const char *buf, size_t count) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -402,7 +451,8 @@ static ssize_t set_component_active(struct class_device *cdev, const char *buf, return count; } -static ssize_t get_component_locate(struct class_device *cdev, char *buf) +static ssize_t get_component_locate(struct device *cdev, + struct device_attribute *attr, char *buf) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -412,8 +462,9 @@ static ssize_t get_component_locate(struct class_device *cdev, char *buf) return snprintf(buf, 40, "%d\n", ecomp->locate); } -static ssize_t set_component_locate(struct class_device *cdev, const char *buf, - size_t count) +static ssize_t set_component_locate(struct device *cdev, + struct device_attribute *attr, + const char *buf, size_t count) { struct enclosure_device *edev = to_enclosure_device(cdev->parent); struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -424,7 +475,8 @@ static ssize_t set_component_locate(struct class_device *cdev, const char *buf, return count; } -static ssize_t get_component_type(struct class_device *cdev, char *buf) +static ssize_t get_component_type(struct device *cdev, + struct device_attribute *attr, char *buf) { struct enclosure_component *ecomp = to_enclosure_component(cdev); @@ -432,24 +484,32 @@ static ssize_t get_component_type(struct class_device *cdev, char *buf) } -static struct class_device_attribute enclosure_component_attrs[] = { - __ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault, - set_component_fault), - __ATTR(status, S_IRUGO | S_IWUSR, get_component_status, - set_component_status), - __ATTR(active, S_IRUGO | S_IWUSR, get_component_active, - set_component_active), - __ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate, - set_component_locate), - __ATTR(type, S_IRUGO, get_component_type, NULL), - __ATTR_NULL +static DEVICE_ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault, + set_component_fault); +static DEVICE_ATTR(status, S_IRUGO | S_IWUSR, get_component_status, + set_component_status); +static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active, + set_component_active); +static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate, + set_component_locate); +static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL); + +static struct attribute *enclosure_component_attrs[] = { + &dev_attr_fault.attr, + &dev_attr_status.attr, + &dev_attr_active.attr, + &dev_attr_locate.attr, + &dev_attr_type.attr, + NULL }; -static struct class enclosure_component_class = { - .name = "enclosure_component", - .owner = THIS_MODULE, - .class_dev_attrs = enclosure_component_attrs, - .release = enclosure_component_release, +static struct attribute_group enclosure_group = { + .attrs = enclosure_component_attrs, +}; + +static struct attribute_group *enclosure_groups[] = { + &enclosure_group, + NULL }; static int __init enclosure_init(void) @@ -459,20 +519,12 @@ static int __init enclosure_init(void) err = class_register(&enclosure_class); if (err) return err; - err = class_register(&enclosure_component_class); - if (err) - goto err_out; return 0; - err_out: - class_unregister(&enclosure_class); - - return err; } static void __exit enclosure_exit(void) { - class_unregister(&enclosure_component_class); class_unregister(&enclosure_class); } diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 1cfd7f3..e2e7c05 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -231,7 +231,7 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type) if (!device || !acpi_driver_data(device)) return -EINVAL; - fujitsu->acpi_handle = 0; + fujitsu->acpi_handle = NULL; return 0; } diff --git a/drivers/misc/hdpuftrs/hdpu_cpustate.c b/drivers/misc/hdpuftrs/hdpu_cpustate.c index aa8ce7ab..302e924 100644 --- a/drivers/misc/hdpuftrs/hdpu_cpustate.c +++ b/drivers/misc/hdpuftrs/hdpu_cpustate.c @@ -164,6 +164,7 @@ static struct platform_driver hdpu_cpustate_driver = { .remove = hdpu_cpustate_remove, .driver = { .name = HDPU_CPUSTATE_NAME, + .owner = THIS_MODULE, }, }; @@ -248,3 +249,4 @@ module_exit(cpustate_exit); MODULE_AUTHOR("Brian Waite"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDPU_CPUSTATE_NAME); diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c index 2887b21..2fa36f7 100644 --- a/drivers/misc/hdpuftrs/hdpu_nexus.c +++ b/drivers/misc/hdpuftrs/hdpu_nexus.c @@ -55,6 +55,7 @@ static struct platform_driver hdpu_nexus_driver = { .remove = hdpu_nexus_remove, .driver = { .name = HDPU_NEXUS_NAME, + .owner = THIS_MODULE, }, }; @@ -151,3 +152,4 @@ module_exit(nexus_exit); MODULE_AUTHOR("Brian Waite"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDPU_NEXUS_NAME); diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c index 4f9d4a9..b5f6add 100644 --- a/drivers/misc/ibmasm/module.c +++ b/drivers/misc/ibmasm/module.c @@ -106,7 +106,7 @@ static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_devi sp->irq = pdev->irq; sp->base_address = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); - if (sp->base_address == 0) { + if (!sp->base_address) { dev_err(sp->dev, "Failed to ioremap pci memory\n"); result = -ENODEV; goto error_ioremap; diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index de16e88..5bb8816 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -175,28 +175,18 @@ static int intel_menlow_memory_add(struct acpi_device *device) goto end; } - if (cdev) { - acpi_driver_data(device) = cdev; - result = sysfs_create_link(&device->dev.kobj, - &cdev->device.kobj, "thermal_cooling"); - if (result) - goto unregister; - - result = sysfs_create_link(&cdev->device.kobj, - &device->dev.kobj, "device"); - if (result) { - sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); - goto unregister; - } - } + acpi_driver_data(device) = cdev; + result = sysfs_create_link(&device->dev.kobj, + &cdev->device.kobj, "thermal_cooling"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); + result = sysfs_create_link(&cdev->device.kobj, + &device->dev.kobj, "device"); + if (result) + printk(KERN_ERR PREFIX "Create sysfs link\n"); end: return result; - - unregister: - thermal_cooling_device_unregister(cdev); - return result; - } static int intel_menlow_memory_remove(struct acpi_device *device, int type) @@ -213,7 +203,7 @@ static int intel_menlow_memory_remove(struct acpi_device *device, int type) return 0; } -const static struct acpi_device_id intel_menlow_memory_ids[] = { +static const struct acpi_device_id intel_menlow_memory_ids[] = { {"INT0002", 0}, {"", 0}, }; diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c new file mode 100644 index 0000000..6d6286c --- /dev/null +++ b/drivers/misc/kgdbts.c @@ -0,0 +1,1090 @@ +/* + * kgdbts is a test suite for kgdb for the sole purpose of validating + * that key pieces of the kgdb internals are working properly such as + * HW/SW breakpoints, single stepping, and NMI. + * + * Created by: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Information about the kgdb test suite. + * ------------------------------------- + * + * The kgdb test suite is designed as a KGDB I/O module which + * simulates the communications that a debugger would have with kgdb. + * The tests are broken up in to a line by line and referenced here as + * a "get" which is kgdb requesting input and "put" which is kgdb + * sending a response. + * + * The kgdb suite can be invoked from the kernel command line + * arguments system or executed dynamically at run time. The test + * suite uses the variable "kgdbts" to obtain the information about + * which tests to run and to configure the verbosity level. The + * following are the various characters you can use with the kgdbts= + * line: + * + * When using the "kgdbts=" you only choose one of the following core + * test types: + * A = Run all the core tests silently + * V1 = Run all the core tests with minimal output + * V2 = Run all the core tests in debug mode + * + * You can also specify optional tests: + * N## = Go to sleep with interrupts of for ## seconds + * to test the HW NMI watchdog + * F## = Break at do_fork for ## iterations + * S## = Break at sys_open for ## iterations + * + * NOTE: that the do_fork and sys_open tests are mutually exclusive. + * + * To invoke the kgdb test suite from boot you use a kernel start + * argument as follows: + * kgdbts=V1 kgdbwait + * Or if you wanted to perform the NMI test for 6 seconds and do_fork + * test for 100 forks, you could use: + * kgdbts=V1N6F100 kgdbwait + * + * The test suite can also be invoked at run time with: + * echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts + * Or as another example: + * echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts + * + * When developing a new kgdb arch specific implementation or + * using these tests for the purpose of regression testing, + * several invocations are required. + * + * 1) Boot with the test suite enabled by using the kernel arguments + * "kgdbts=V1F100 kgdbwait" + * ## If kgdb arch specific implementation has NMI use + * "kgdbts=V1N6F100 + * + * 2) After the system boot run the basic test. + * echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts + * + * 3) Run the concurrency tests. It is best to use n+1 + * while loops where n is the number of cpus you have + * in your system. The example below uses only two + * loops. + * + * ## This tests break points on sys_open + * while [ 1 ] ; do find / > /dev/null 2>&1 ; done & + * while [ 1 ] ; do find / > /dev/null 2>&1 ; done & + * echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts + * fg # and hit control-c + * fg # and hit control-c + * ## This tests break points on do_fork + * while [ 1 ] ; do date > /dev/null ; done & + * while [ 1 ] ; do date > /dev/null ; done & + * echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts + * fg # and hit control-c + * + */ + +#include <linux/kernel.h> +#include <linux/kgdb.h> +#include <linux/ctype.h> +#include <linux/uaccess.h> +#include <linux/syscalls.h> +#include <linux/nmi.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/delay.h> + +#define v1printk(a...) do { \ + if (verbose) \ + printk(KERN_INFO a); \ + } while (0) +#define v2printk(a...) do { \ + if (verbose > 1) \ + printk(KERN_INFO a); \ + touch_nmi_watchdog(); \ + } while (0) +#define eprintk(a...) do { \ + printk(KERN_ERR a); \ + WARN_ON(1); \ + } while (0) +#define MAX_CONFIG_LEN 40 + +static const char hexchars[] = "0123456789abcdef"; +static struct kgdb_io kgdbts_io_ops; +static char get_buf[BUFMAX]; +static int get_buf_cnt; +static char put_buf[BUFMAX]; +static int put_buf_cnt; +static char scratch_buf[BUFMAX]; +static int verbose; +static int repeat_test; +static int test_complete; +static int send_ack; +static int final_ack; +static int hw_break_val; +static int hw_break_val2; +#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) +static int arch_needs_sstep_emulation = 1; +#else +static int arch_needs_sstep_emulation; +#endif +static unsigned long sstep_addr; +static int sstep_state; + +/* Storage for the registers, in GDB format. */ +static unsigned long kgdbts_gdb_regs[(NUMREGBYTES + + sizeof(unsigned long) - 1) / + sizeof(unsigned long)]; +static struct pt_regs kgdbts_regs; + +/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ +static int configured = -1; + +#ifdef CONFIG_KGDB_TESTS_BOOT_STRING +static char config[MAX_CONFIG_LEN] = CONFIG_KGDB_TESTS_BOOT_STRING; +#else +static char config[MAX_CONFIG_LEN]; +#endif +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_CONFIG_LEN, +}; + +static void fill_get_buf(char *buf); + +struct test_struct { + char *get; + char *put; + void (*get_handler)(char *); + int (*put_handler)(char *, char *); +}; + +struct test_state { + char *name; + struct test_struct *tst; + int idx; + int (*run_test) (int, int); + int (*validate_put) (char *); +}; + +static struct test_state ts; + +static int kgdbts_unreg_thread(void *ptr) +{ + /* Wait until the tests are complete and then ungresiter the I/O + * driver. + */ + while (!final_ack) + msleep_interruptible(1500); + + if (configured) + kgdb_unregister_io_module(&kgdbts_io_ops); + configured = 0; + + return 0; +} + +/* This is noinline such that it can be used for a single location to + * place a breakpoint + */ +static noinline void kgdbts_break_test(void) +{ + v2printk("kgdbts: breakpoint complete\n"); +} + +/* Lookup symbol info in the kernel */ +static unsigned long lookup_addr(char *arg) +{ + unsigned long addr = 0; + + if (!strcmp(arg, "kgdbts_break_test")) + addr = (unsigned long)kgdbts_break_test; + else if (!strcmp(arg, "sys_open")) + addr = (unsigned long)sys_open; + else if (!strcmp(arg, "do_fork")) + addr = (unsigned long)do_fork; + else if (!strcmp(arg, "hw_break_val")) + addr = (unsigned long)&hw_break_val; + return addr; +} + +static void break_helper(char *bp_type, char *arg, unsigned long vaddr) +{ + unsigned long addr; + + if (arg) + addr = lookup_addr(arg); + else + addr = vaddr; + + sprintf(scratch_buf, "%s,%lx,%i", bp_type, addr, + BREAK_INSTR_SIZE); + fill_get_buf(scratch_buf); +} + +static void sw_break(char *arg) +{ + break_helper("Z0", arg, 0); +} + +static void sw_rem_break(char *arg) +{ + break_helper("z0", arg, 0); +} + +static void hw_break(char *arg) +{ + break_helper("Z1", arg, 0); +} + +static void hw_rem_break(char *arg) +{ + break_helper("z1", arg, 0); +} + +static void hw_write_break(char *arg) +{ + break_helper("Z2", arg, 0); +} + +static void hw_rem_write_break(char *arg) +{ + break_helper("z2", arg, 0); +} + +static void hw_access_break(char *arg) +{ + break_helper("Z4", arg, 0); +} + +static void hw_rem_access_break(char *arg) +{ + break_helper("z4", arg, 0); +} + +static void hw_break_val_access(void) +{ + hw_break_val2 = hw_break_val; +} + +static void hw_break_val_write(void) +{ + hw_break_val++; +} + +static int check_and_rewind_pc(char *put_str, char *arg) +{ + unsigned long addr = lookup_addr(arg); + int offset = 0; + + kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs, + NUMREGBYTES); + gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs); + v2printk("Stopped at IP: %lx\n", instruction_pointer(&kgdbts_regs)); +#ifdef CONFIG_X86 + /* On x86 a breakpoint stop requires it to be decremented */ + if (addr + 1 == kgdbts_regs.ip) + offset = -1; +#endif + if (strcmp(arg, "silent") && + instruction_pointer(&kgdbts_regs) + offset != addr) { + eprintk("kgdbts: BP mismatch %lx expected %lx\n", + instruction_pointer(&kgdbts_regs) + offset, addr); + return 1; + } +#ifdef CONFIG_X86 + /* On x86 adjust the instruction pointer if needed */ + kgdbts_regs.ip += offset; +#endif + return 0; +} + +static int check_single_step(char *put_str, char *arg) +{ + unsigned long addr = lookup_addr(arg); + /* + * From an arch indepent point of view the instruction pointer + * should be on a different instruction + */ + kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs, + NUMREGBYTES); + gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs); + v2printk("Singlestep stopped at IP: %lx\n", + instruction_pointer(&kgdbts_regs)); + if (instruction_pointer(&kgdbts_regs) == addr) { + eprintk("kgdbts: SingleStep failed at %lx\n", + instruction_pointer(&kgdbts_regs)); + return 1; + } + + return 0; +} + +static void write_regs(char *arg) +{ + memset(scratch_buf, 0, sizeof(scratch_buf)); + scratch_buf[0] = 'G'; + pt_regs_to_gdb_regs(kgdbts_gdb_regs, &kgdbts_regs); + kgdb_mem2hex((char *)kgdbts_gdb_regs, &scratch_buf[1], NUMREGBYTES); + fill_get_buf(scratch_buf); +} + +static void skip_back_repeat_test(char *arg) +{ + int go_back = simple_strtol(arg, NULL, 10); + + repeat_test--; + if (repeat_test <= 0) + ts.idx++; + else + ts.idx -= go_back; + fill_get_buf(ts.tst[ts.idx].get); +} + +static int got_break(char *put_str, char *arg) +{ + test_complete = 1; + if (!strncmp(put_str+1, arg, 2)) { + if (!strncmp(arg, "T0", 2)) + test_complete = 2; + return 0; + } + return 1; +} + +static void emul_sstep_get(char *arg) +{ + if (!arch_needs_sstep_emulation) { + fill_get_buf(arg); + return; + } + switch (sstep_state) { + case 0: + v2printk("Emulate single step\n"); + /* Start by looking at the current PC */ + fill_get_buf("g"); + break; + case 1: + /* set breakpoint */ + break_helper("Z0", 0, sstep_addr); + break; + case 2: + /* Continue */ + fill_get_buf("c"); + break; + case 3: + /* Clear breakpoint */ + break_helper("z0", 0, sstep_addr); + break; + default: + eprintk("kgdbts: ERROR failed sstep get emulation\n"); + } + sstep_state++; +} + +static int emul_sstep_put(char *put_str, char *arg) +{ + if (!arch_needs_sstep_emulation) { + if (!strncmp(put_str+1, arg, 2)) + return 0; + return 1; + } + switch (sstep_state) { + case 1: + /* validate the "g" packet to get the IP */ + kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs, + NUMREGBYTES); + gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs); + v2printk("Stopped at IP: %lx\n", + instruction_pointer(&kgdbts_regs)); + /* Want to stop at IP + break instruction size by default */ + sstep_addr = instruction_pointer(&kgdbts_regs) + + BREAK_INSTR_SIZE; + break; + case 2: + if (strncmp(put_str, "$OK", 3)) { + eprintk("kgdbts: failed sstep break set\n"); + return 1; + } + break; + case 3: + if (strncmp(put_str, "$T0", 3)) { + eprintk("kgdbts: failed continue sstep\n"); + return 1; + } + break; + case 4: + if (strncmp(put_str, "$OK", 3)) { + eprintk("kgdbts: failed sstep break unset\n"); + return 1; + } + /* Single step is complete so continue on! */ + sstep_state = 0; + return 0; + default: + eprintk("kgdbts: ERROR failed sstep put emulation\n"); + } + + /* Continue on the same test line until emulation is complete */ + ts.idx--; + return 0; +} + +static int final_ack_set(char *put_str, char *arg) +{ + if (strncmp(put_str+1, arg, 2)) + return 1; + final_ack = 1; + return 0; +} +/* + * Test to plant a breakpoint and detach, which should clear out the + * breakpoint and restore the original instruction. + */ +static struct test_struct plant_and_detach_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ + { "D", "OK" }, /* Detach */ + { "", "" }, +}; + +/* + * Simple test to write in a software breakpoint, check for the + * correct stop location and detach. + */ +static struct test_struct sw_breakpoint_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "kgdbts_break_test", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, + { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */ + { "D", "OK" }, /* Detach */ + { "D", "OK", 0, got_break }, /* If the test worked we made it here */ + { "", "" }, +}; + +/* + * Test a known bad memory read location to test the fault handler and + * read bytes 1-8 at the bad address + */ +static struct test_struct bad_read_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "m0,1", "E*" }, /* read 1 byte at address 1 */ + { "m0,2", "E*" }, /* read 1 byte at address 2 */ + { "m0,3", "E*" }, /* read 1 byte at address 3 */ + { "m0,4", "E*" }, /* read 1 byte at address 4 */ + { "m0,5", "E*" }, /* read 1 byte at address 5 */ + { "m0,6", "E*" }, /* read 1 byte at address 6 */ + { "m0,7", "E*" }, /* read 1 byte at address 7 */ + { "m0,8", "E*" }, /* read 1 byte at address 8 */ + { "D", "OK" }, /* Detach which removes all breakpoints and continues */ + { "", "" }, +}; + +/* + * Test for hitting a breakpoint, remove it, single step, plant it + * again and detach. + */ +static struct test_struct singlestep_break_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "kgdbts_break_test", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, /* Write registers */ + { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */ + { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ + { "g", "kgdbts_break_test", 0, check_single_step }, + { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "kgdbts_break_test", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, /* Write registers */ + { "D", "OK" }, /* Remove all breakpoints and continues */ + { "", "" }, +}; + +/* + * Test for hitting a breakpoint at do_fork for what ever the number + * of iterations required by the variable repeat_test. + */ +static struct test_struct do_fork_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "do_fork", "OK", sw_break, }, /* set sw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "do_fork", 0, check_and_rewind_pc }, /* check location */ + { "write", "OK", write_regs }, /* Write registers */ + { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */ + { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ + { "g", "do_fork", 0, check_single_step }, + { "do_fork", "OK", sw_break, }, /* set sw breakpoint */ + { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */ + { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */ + { "", "" }, +}; + +/* Test for hitting a breakpoint at sys_open for what ever the number + * of iterations required by the variable repeat_test. + */ +static struct test_struct sys_open_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "sys_open", "OK", sw_break, }, /* set sw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "sys_open", 0, check_and_rewind_pc }, /* check location */ + { "write", "OK", write_regs }, /* Write registers */ + { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */ + { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */ + { "g", "sys_open", 0, check_single_step }, + { "sys_open", "OK", sw_break, }, /* set sw breakpoint */ + { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */ + { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */ + { "", "" }, +}; + +/* + * Test for hitting a simple hw breakpoint + */ +static struct test_struct hw_breakpoint_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */ + { "c", "T0*", }, /* Continue */ + { "g", "kgdbts_break_test", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, + { "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */ + { "D", "OK" }, /* Detach */ + { "D", "OK", 0, got_break }, /* If the test worked we made it here */ + { "", "" }, +}; + +/* + * Test for hitting a hw write breakpoint + */ +static struct test_struct hw_write_break_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */ + { "c", "T0*", 0, got_break }, /* Continue */ + { "g", "silent", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, + { "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */ + { "D", "OK" }, /* Detach */ + { "D", "OK", 0, got_break }, /* If the test worked we made it here */ + { "", "" }, +}; + +/* + * Test for hitting a hw access breakpoint + */ +static struct test_struct hw_access_break_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */ + { "c", "T0*", 0, got_break }, /* Continue */ + { "g", "silent", 0, check_and_rewind_pc }, + { "write", "OK", write_regs }, + { "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */ + { "D", "OK" }, /* Detach */ + { "D", "OK", 0, got_break }, /* If the test worked we made it here */ + { "", "" }, +}; + +/* + * Test for hitting a hw access breakpoint + */ +static struct test_struct nmi_sleep_test[] = { + { "?", "S0*" }, /* Clear break points */ + { "c", "T0*", 0, got_break }, /* Continue */ + { "D", "OK" }, /* Detach */ + { "D", "OK", 0, got_break }, /* If the test worked we made it here */ + { "", "" }, +}; + +static void fill_get_buf(char *buf) +{ + unsigned char checksum = 0; + int count = 0; + char ch; + + strcpy(get_buf, "$"); + strcat(get_buf, buf); + while ((ch = buf[count])) { + checksum += ch; + count++; + } + strcat(get_buf, "#"); + get_buf[count + 2] = hexchars[checksum >> 4]; + get_buf[count + 3] = hexchars[checksum & 0xf]; + get_buf[count + 4] = '\0'; + v2printk("get%i: %s\n", ts.idx, get_buf); +} + +static int validate_simple_test(char *put_str) +{ + char *chk_str; + + if (ts.tst[ts.idx].put_handler) + return ts.tst[ts.idx].put_handler(put_str, + ts.tst[ts.idx].put); + + chk_str = ts.tst[ts.idx].put; + if (*put_str == '$') + put_str++; + + while (*chk_str != '\0' && *put_str != '\0') { + /* If someone does a * to match the rest of the string, allow + * it, or stop if the recieved string is complete. + */ + if (*put_str == '#' || *chk_str == '*') + return 0; + if (*put_str != *chk_str) + return 1; + + chk_str++; + put_str++; + } + if (*chk_str == '\0' && (*put_str == '\0' || *put_str == '#')) + return 0; + + return 1; +} + +static int run_simple_test(int is_get_char, int chr) +{ + int ret = 0; + if (is_get_char) { + /* Send an ACK on the get if a prior put completed and set the + * send ack variable + */ + if (send_ack) { + send_ack = 0; + return '+'; + } + /* On the first get char, fill the transmit buffer and then + * take from the get_string. + */ + if (get_buf_cnt == 0) { + if (ts.tst[ts.idx].get_handler) + ts.tst[ts.idx].get_handler(ts.tst[ts.idx].get); + else + fill_get_buf(ts.tst[ts.idx].get); + } + + if (get_buf[get_buf_cnt] == '\0') { + eprintk("kgdbts: ERROR GET: EOB on '%s' at %i\n", + ts.name, ts.idx); + get_buf_cnt = 0; + fill_get_buf("D"); + } + ret = get_buf[get_buf_cnt]; + get_buf_cnt++; + return ret; + } + + /* This callback is a put char which is when kgdb sends data to + * this I/O module. + */ + if (ts.tst[ts.idx].get[0] == '\0' && + ts.tst[ts.idx].put[0] == '\0') { + eprintk("kgdbts: ERROR: beyond end of test on" + " '%s' line %i\n", ts.name, ts.idx); + return 0; + } + + if (put_buf_cnt >= BUFMAX) { + eprintk("kgdbts: ERROR: put buffer overflow on" + " '%s' line %i\n", ts.name, ts.idx); + put_buf_cnt = 0; + return 0; + } + /* Ignore everything until the first valid packet start '$' */ + if (put_buf_cnt == 0 && chr != '$') + return 0; + + put_buf[put_buf_cnt] = chr; + put_buf_cnt++; + + /* End of packet == #XX so look for the '#' */ + if (put_buf_cnt > 3 && put_buf[put_buf_cnt - 3] == '#') { + put_buf[put_buf_cnt] = '\0'; + v2printk("put%i: %s\n", ts.idx, put_buf); + /* Trigger check here */ + if (ts.validate_put && ts.validate_put(put_buf)) { + eprintk("kgdbts: ERROR PUT: end of test " + "buffer on '%s' line %i expected %s got %s\n", + ts.name, ts.idx, ts.tst[ts.idx].put, put_buf); + } + ts.idx++; + put_buf_cnt = 0; + get_buf_cnt = 0; + send_ack = 1; + } + return 0; +} + +static void init_simple_test(void) +{ + memset(&ts, 0, sizeof(ts)); + ts.run_test = run_simple_test; + ts.validate_put = validate_simple_test; +} + +static void run_plant_and_detach_test(int is_early) +{ + char before[BREAK_INSTR_SIZE]; + char after[BREAK_INSTR_SIZE]; + + probe_kernel_read(before, (char *)kgdbts_break_test, + BREAK_INSTR_SIZE); + init_simple_test(); + ts.tst = plant_and_detach_test; + ts.name = "plant_and_detach_test"; + /* Activate test with initial breakpoint */ + if (!is_early) + kgdb_breakpoint(); + probe_kernel_read(after, (char *)kgdbts_break_test, + BREAK_INSTR_SIZE); + if (memcmp(before, after, BREAK_INSTR_SIZE)) { + printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n"); + panic("kgdb memory corruption"); + } + + /* complete the detach test */ + if (!is_early) + kgdbts_break_test(); +} + +static void run_breakpoint_test(int is_hw_breakpoint) +{ + test_complete = 0; + init_simple_test(); + if (is_hw_breakpoint) { + ts.tst = hw_breakpoint_test; + ts.name = "hw_breakpoint_test"; + } else { + ts.tst = sw_breakpoint_test; + ts.name = "sw_breakpoint_test"; + } + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); + /* run code with the break point in it */ + kgdbts_break_test(); + kgdb_breakpoint(); + + if (test_complete) + return; + + eprintk("kgdbts: ERROR %s test failed\n", ts.name); +} + +static void run_hw_break_test(int is_write_test) +{ + test_complete = 0; + init_simple_test(); + if (is_write_test) { + ts.tst = hw_write_break_test; + ts.name = "hw_write_break_test"; + } else { + ts.tst = hw_access_break_test; + ts.name = "hw_access_break_test"; + } + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); + hw_break_val_access(); + if (is_write_test) { + if (test_complete == 2) + eprintk("kgdbts: ERROR %s broke on access\n", + ts.name); + hw_break_val_write(); + } + kgdb_breakpoint(); + + if (test_complete == 1) + return; + + eprintk("kgdbts: ERROR %s test failed\n", ts.name); +} + +static void run_nmi_sleep_test(int nmi_sleep) +{ + unsigned long flags; + + init_simple_test(); + ts.tst = nmi_sleep_test; + ts.name = "nmi_sleep_test"; + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); + local_irq_save(flags); + mdelay(nmi_sleep*1000); + touch_nmi_watchdog(); + local_irq_restore(flags); + if (test_complete != 2) + eprintk("kgdbts: ERROR nmi_test did not hit nmi\n"); + kgdb_breakpoint(); + if (test_complete == 1) + return; + + eprintk("kgdbts: ERROR %s test failed\n", ts.name); +} + +static void run_bad_read_test(void) +{ + init_simple_test(); + ts.tst = bad_read_test; + ts.name = "bad_read_test"; + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); +} + +static void run_do_fork_test(void) +{ + init_simple_test(); + ts.tst = do_fork_test; + ts.name = "do_fork_test"; + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); +} + +static void run_sys_open_test(void) +{ + init_simple_test(); + ts.tst = sys_open_test; + ts.name = "sys_open_test"; + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); +} + +static void run_singlestep_break_test(void) +{ + init_simple_test(); + ts.tst = singlestep_break_test; + ts.name = "singlestep_breakpoint_test"; + /* Activate test with initial breakpoint */ + kgdb_breakpoint(); + kgdbts_break_test(); + kgdbts_break_test(); +} + +static void kgdbts_run_tests(void) +{ + char *ptr; + int fork_test = 0; + int sys_open_test = 0; + int nmi_sleep = 0; + + ptr = strstr(config, "F"); + if (ptr) + fork_test = simple_strtol(ptr+1, NULL, 10); + ptr = strstr(config, "S"); + if (ptr) + sys_open_test = simple_strtol(ptr+1, NULL, 10); + ptr = strstr(config, "N"); + if (ptr) + nmi_sleep = simple_strtol(ptr+1, NULL, 10); + + /* required internal KGDB tests */ + v1printk("kgdbts:RUN plant and detach test\n"); + run_plant_and_detach_test(0); + v1printk("kgdbts:RUN sw breakpoint test\n"); + run_breakpoint_test(0); + v1printk("kgdbts:RUN bad memory access test\n"); + run_bad_read_test(); + v1printk("kgdbts:RUN singlestep breakpoint test\n"); + run_singlestep_break_test(); + + /* ===Optional tests=== */ + + /* All HW break point tests */ + if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { + v1printk("kgdbts:RUN hw breakpoint test\n"); + run_breakpoint_test(1); + v1printk("kgdbts:RUN hw write breakpoint test\n"); + run_hw_break_test(1); + v1printk("kgdbts:RUN access write breakpoint test\n"); + run_hw_break_test(0); + } + + if (nmi_sleep) { + v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep); + run_nmi_sleep_test(nmi_sleep); + } + + /* If the do_fork test is run it will be the last test that is + * executed because a kernel thread will be spawned at the very + * end to unregister the debug hooks. + */ + if (fork_test) { + repeat_test = fork_test; + printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n", + repeat_test); + kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg"); + run_do_fork_test(); + return; + } + + /* If the sys_open test is run it will be the last test that is + * executed because a kernel thread will be spawned at the very + * end to unregister the debug hooks. + */ + if (sys_open_test) { + repeat_test = sys_open_test; + printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n", + repeat_test); + kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg"); + run_sys_open_test(); + return; + } + /* Shutdown and unregister */ + kgdb_unregister_io_module(&kgdbts_io_ops); + configured = 0; +} + +static int kgdbts_option_setup(char *opt) +{ + if (strlen(opt) > MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdbts: config string too long\n"); + return -ENOSPC; + } + strcpy(config, opt); + + verbose = 0; + if (strstr(config, "V1")) + verbose = 1; + if (strstr(config, "V2")) + verbose = 2; + + return 0; +} + +__setup("kgdbts=", kgdbts_option_setup); + +static int configure_kgdbts(void) +{ + int err = 0; + + if (!strlen(config) || isspace(config[0])) + goto noconfig; + err = kgdbts_option_setup(config); + if (err) + goto noconfig; + + final_ack = 0; + run_plant_and_detach_test(1); + + err = kgdb_register_io_module(&kgdbts_io_ops); + if (err) { + configured = 0; + return err; + } + configured = 1; + kgdbts_run_tests(); + + return err; + +noconfig: + config[0] = 0; + configured = 0; + + return err; +} + +static int __init init_kgdbts(void) +{ + /* Already configured? */ + if (configured == 1) + return 0; + + return configure_kgdbts(); +} + +static void cleanup_kgdbts(void) +{ + if (configured == 1) + kgdb_unregister_io_module(&kgdbts_io_ops); +} + +static int kgdbts_get_char(void) +{ + int val = 0; + + if (ts.run_test) + val = ts.run_test(1, 0); + + return val; +} + +static void kgdbts_put_char(u8 chr) +{ + if (ts.run_test) + ts.run_test(0, chr); +} + +static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp) +{ + int len = strlen(kmessage); + + if (len >= MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdbts: config string too long\n"); + return -ENOSPC; + } + + /* Only copy in the string if the init function has not run yet */ + if (configured < 0) { + strcpy(config, kmessage); + return 0; + } + + if (kgdb_connected) { + printk(KERN_ERR + "kgdbts: Cannot reconfigure while KGDB is connected.\n"); + + return -EBUSY; + } + + strcpy(config, kmessage); + /* Chop out \n char as a result of echo */ + if (config[len - 1] == '\n') + config[len - 1] = '\0'; + + if (configured == 1) + cleanup_kgdbts(); + + /* Go and configure with the new params. */ + return configure_kgdbts(); +} + +static void kgdbts_pre_exp_handler(void) +{ + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); +} + +static void kgdbts_post_exp_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); +} + +static struct kgdb_io kgdbts_io_ops = { + .name = "kgdbts", + .read_char = kgdbts_get_char, + .write_char = kgdbts_put_char, + .pre_exception = kgdbts_pre_exp_handler, + .post_exception = kgdbts_post_exp_handler, +}; + +module_init(init_kgdbts); +module_exit(cleanup_kgdbts); +module_param_call(kgdbts, param_set_kgdbts_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdbts, "<A|V1|V2>[F#|S#][N#]"); +MODULE_DESCRIPTION("KGDB Test Suite"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Wind River Systems, Inc."); + diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index c884730..1bfe5d1 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -197,7 +197,7 @@ static int lkdtm_parse_commandline(void) { int i; - if (cpoint_name == INVALID || cpoint_type == NONE || + if (cpoint_name == NULL || cpoint_type == NULL || cpoint_count < 1 || recur_count < 1) return -EINVAL; diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile new file mode 100644 index 0000000..b6e40a7 --- /dev/null +++ b/drivers/misc/sgi-xp/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for SGI's XP devices. +# + +obj-$(CONFIG_SGI_XP) += xp.o +xp-y := xp_main.o xp_nofault.o + +obj-$(CONFIG_SGI_XP) += xpc.o +xpc-y := xpc_main.o xpc_channel.o xpc_partition.o + +obj-$(CONFIG_SGI_XP) += xpnet.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h new file mode 100644 index 0000000..5515234 --- /dev/null +++ b/drivers/misc/sgi-xp/xp.h @@ -0,0 +1,463 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2008 Silicon Graphics, Inc. All rights reserved. + */ + +/* + * External Cross Partition (XP) structures and defines. + */ + +#ifndef _DRIVERS_MISC_SGIXP_XP_H +#define _DRIVERS_MISC_SGIXP_XP_H + +#include <linux/cache.h> +#include <linux/hardirq.h> +#include <linux/mutex.h> +#include <asm/sn/types.h> +#include <asm/sn/bte.h> + +#ifdef USE_DBUG_ON +#define DBUG_ON(condition) BUG_ON(condition) +#else +#define DBUG_ON(condition) +#endif + +/* + * Define the maximum number of logically defined partitions the system + * can support. It is constrained by the maximum number of hardware + * partitionable regions. The term 'region' in this context refers to the + * minimum number of nodes that can comprise an access protection grouping. + * The access protection is in regards to memory, IPI and IOI. + * + * The maximum number of hardware partitionable regions is equal to the + * maximum number of nodes in the entire system divided by the minimum number + * of nodes that comprise an access protection grouping. + */ +#define XP_MAX_PARTITIONS 64 + +/* + * Define the number of u64s required to represent all the C-brick nasids + * as a bitmap. The cross-partition kernel modules deal only with + * C-brick nasids, thus the need for bitmaps which don't account for + * odd-numbered (non C-brick) nasids. + */ +#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) +#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) +#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) + +/* + * Wrapper for bte_copy() that should it return a failure status will retry + * the bte_copy() once in the hope that the failure was due to a temporary + * aberration (i.e., the link going down temporarily). + * + * src - physical address of the source of the transfer. + * vdst - virtual address of the destination of the transfer. + * len - number of bytes to transfer from source to destination. + * mode - see bte_copy() for definition. + * notification - see bte_copy() for definition. + * + * Note: xp_bte_copy() should never be called while holding a spinlock. + */ +static inline bte_result_t +xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) +{ + bte_result_t ret; + u64 pdst = ia64_tpa(vdst); + + /* + * Ensure that the physically mapped memory is contiguous. + * + * We do this by ensuring that the memory is from region 7 only. + * If the need should arise to use memory from one of the other + * regions, then modify the BUG_ON() statement to ensure that the + * memory from that region is always physically contiguous. + */ + BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); + + ret = bte_copy(src, pdst, len, mode, notification); + if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { + if (!in_interrupt()) + cond_resched(); + + ret = bte_copy(src, pdst, len, mode, notification); + } + + return ret; +} + +/* + * XPC establishes channel connections between the local partition and any + * other partition that is currently up. Over these channels, kernel-level + * `users' can communicate with their counterparts on the other partitions. + * + * The maxinum number of channels is limited to eight. For performance reasons, + * the internal cross partition structures require sixteen bytes per channel, + * and eight allows all of this interface-shared info to fit in one cache line. + * + * XPC_NCHANNELS reflects the total number of channels currently defined. + * If the need for additional channels arises, one can simply increase + * XPC_NCHANNELS accordingly. If the day should come where that number + * exceeds the MAXIMUM number of channels allowed (eight), then one will need + * to make changes to the XPC code to allow for this. + */ +#define XPC_MEM_CHANNEL 0 /* memory channel number */ +#define XPC_NET_CHANNEL 1 /* network channel number */ + +#define XPC_NCHANNELS 2 /* #of defined channels */ +#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */ + +#if XPC_NCHANNELS > XPC_MAX_NCHANNELS +#error XPC_NCHANNELS exceeds MAXIMUM allowed. +#endif + +/* + * The format of an XPC message is as follows: + * + * +-------+--------------------------------+ + * | flags |////////////////////////////////| + * +-------+--------------------------------+ + * | message # | + * +----------------------------------------+ + * | payload (user-defined message) | + * | | + * : + * | | + * +----------------------------------------+ + * + * The size of the payload is defined by the user via xpc_connect(). A user- + * defined message resides in the payload area. + * + * The user should have no dealings with the message header, but only the + * message's payload. When a message entry is allocated (via xpc_allocate()) + * a pointer to the payload area is returned and not the actual beginning of + * the XPC message. The user then constructs a message in the payload area + * and passes that pointer as an argument on xpc_send() or xpc_send_notify(). + * + * The size of a message entry (within a message queue) must be a cacheline + * sized multiple in order to facilitate the BTE transfer of messages from one + * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user + * that wants to fit as many msg entries as possible in a given memory size + * (e.g. a memory page). + */ +struct xpc_msg { + u8 flags; /* FOR XPC INTERNAL USE ONLY */ + u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ + s64 number; /* FOR XPC INTERNAL USE ONLY */ + + u64 payload; /* user defined portion of message */ +}; + +#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload) +#define XPC_MSG_SIZE(_payload_size) \ + L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size)) + +/* + * Define the return values and values passed to user's callout functions. + * (It is important to add new value codes at the end just preceding + * xpcUnknownReason, which must have the highest numerical value.) + */ +enum xpc_retval { + xpcSuccess = 0, + + xpcNotConnected, /* 1: channel is not connected */ + xpcConnected, /* 2: channel connected (opened) */ + xpcRETIRED1, /* 3: (formerly xpcDisconnected) */ + + xpcMsgReceived, /* 4: message received */ + xpcMsgDelivered, /* 5: message delivered and acknowledged */ + + xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */ + + xpcNoWait, /* 7: operation would require wait */ + xpcRetry, /* 8: retry operation */ + xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */ + xpcInterrupted, /* 10: interrupted wait */ + + xpcUnequalMsgSizes, /* 11: message size disparity between sides */ + xpcInvalidAddress, /* 12: invalid address */ + + xpcNoMemory, /* 13: no memory available for XPC structures */ + xpcLackOfResources, /* 14: insufficient resources for operation */ + xpcUnregistered, /* 15: channel is not registered */ + xpcAlreadyRegistered, /* 16: channel is already registered */ + + xpcPartitionDown, /* 17: remote partition is down */ + xpcNotLoaded, /* 18: XPC module is not loaded */ + xpcUnloading, /* 19: this side is unloading XPC module */ + + xpcBadMagic, /* 20: XPC MAGIC string not found */ + + xpcReactivating, /* 21: remote partition was reactivated */ + + xpcUnregistering, /* 22: this side is unregistering channel */ + xpcOtherUnregistering, /* 23: other side is unregistering channel */ + + xpcCloneKThread, /* 24: cloning kernel thread */ + xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */ + + xpcNoHeartbeat, /* 26: remote partition has no heartbeat */ + + xpcPioReadError, /* 27: PIO read error */ + xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */ + + xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */ + xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */ + xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */ + xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */ + xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */ + xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */ + xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */ + xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */ + xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */ + xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */ + + xpcBadVersion, /* 39: bad version number */ + xpcVarsNotSet, /* 40: the XPC variables are not set up */ + xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */ + xpcInvalidPartid, /* 42: invalid partition ID */ + xpcLocalPartid, /* 43: local partition ID */ + + xpcOtherGoingDown, /* 44: other side going down, reason unknown */ + xpcSystemGoingDown, /* 45: system is going down, reason unknown */ + xpcSystemHalt, /* 46: system is being halted */ + xpcSystemReboot, /* 47: system is being rebooted */ + xpcSystemPoweroff, /* 48: system is being powered off */ + + xpcDisconnecting, /* 49: channel disconnecting (closing) */ + + xpcOpenCloseError, /* 50: channel open/close protocol error */ + + xpcDisconnected, /* 51: channel disconnected (closed) */ + + xpcBteSh2Start, /* 52: BTE CRB timeout */ + + /* 53: 0x1 BTE Error Response Short */ + xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT, + + /* 54: 0x2 BTE Error Response Long */ + xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG, + + /* 56: 0x4 BTE Error Response DSB */ + xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP, + + /* 60: 0x8 BTE Error Response Access */ + xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS, + + /* 68: 0x10 BTE Error CRB timeout */ + xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO, + + /* 84: 0x20 BTE Error NACK limit */ + xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT, + + /* 115: BTE end */ + xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL, + + xpcUnknownReason /* 116: unknown reason - must be last in enum */ +}; + +/* + * Define the callout function types used by XPC to update the user on + * connection activity and state changes (via the user function registered by + * xpc_connect()) and to notify them of messages received and delivered (via + * the user function registered by xpc_send_notify()). + * + * The two function types are xpc_channel_func and xpc_notify_func and + * both share the following arguments, with the exception of "data", which + * only xpc_channel_func has. + * + * Arguments: + * + * reason - reason code. (See following table.) + * partid - partition ID associated with condition. + * ch_number - channel # associated with condition. + * data - pointer to optional data. (See following table.) + * key - pointer to optional user-defined value provided as the "key" + * argument to xpc_connect() or xpc_send_notify(). + * + * In the following table the "Optional Data" column applies to callouts made + * to functions registered by xpc_connect(). A "NA" in that column indicates + * that this reason code can be passed to functions registered by + * xpc_send_notify() (i.e. they don't have data arguments). + * + * Also, the first three reason codes in the following table indicate + * success, whereas the others indicate failure. When a failure reason code + * is received, one can assume that the channel is not connected. + * + * + * Reason Code | Cause | Optional Data + * =====================+================================+===================== + * xpcConnected | connection has been established| max #of entries + * | to the specified partition on | allowed in message + * | the specified channel | queue + * ---------------------+--------------------------------+--------------------- + * xpcMsgReceived | an XPC message arrived from | address of payload + * | the specified partition on the | + * | specified channel | [the user must call + * | | xpc_received() when + * | | finished with the + * | | payload] + * ---------------------+--------------------------------+--------------------- + * xpcMsgDelivered | notification that the message | NA + * | was delivered to the intended | + * | recipient and that they have | + * | acknowledged its receipt by | + * | calling xpc_received() | + * =====================+================================+===================== + * xpcUnequalMsgSizes | can't connect to the specified | NULL + * | partition on the specified | + * | channel because of mismatched | + * | message sizes | + * ---------------------+--------------------------------+--------------------- + * xpcNoMemory | insufficient memory avaiable | NULL + * | to allocate message queue | + * ---------------------+--------------------------------+--------------------- + * xpcLackOfResources | lack of resources to create | NULL + * | the necessary kthreads to | + * | support the channel | + * ---------------------+--------------------------------+--------------------- + * xpcUnregistering | this side's user has | NULL or NA + * | unregistered by calling | + * | xpc_disconnect() | + * ---------------------+--------------------------------+--------------------- + * xpcOtherUnregistering| the other side's user has | NULL or NA + * | unregistered by calling | + * | xpc_disconnect() | + * ---------------------+--------------------------------+--------------------- + * xpcNoHeartbeat | the other side's XPC is no | NULL or NA + * | longer heartbeating | + * | | + * ---------------------+--------------------------------+--------------------- + * xpcUnloading | this side's XPC module is | NULL or NA + * | being unloaded | + * | | + * ---------------------+--------------------------------+--------------------- + * xpcOtherUnloading | the other side's XPC module is | NULL or NA + * | is being unloaded | + * | | + * ---------------------+--------------------------------+--------------------- + * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA + * | error while sending an IPI | + * | | + * ---------------------+--------------------------------+--------------------- + * xpcInvalidAddress | the address either received or | NULL or NA + * | sent by the specified partition| + * | is invalid | + * ---------------------+--------------------------------+--------------------- + * xpcBteNotAvailable | attempt to pull data from the | NULL or NA + * xpcBtePoisonError | specified partition over the | + * xpcBteWriteError | specified channel via a | + * xpcBteAccessError | bte_copy() failed | + * xpcBteTimeOutError | | + * xpcBteXtalkError | | + * xpcBteDirectoryError | | + * xpcBteGenericError | | + * xpcBteUnmappedError | | + * ---------------------+--------------------------------+--------------------- + * xpcUnknownReason | the specified channel to the | NULL or NA + * | specified partition was | + * | unavailable for unknown reasons| + * =====================+================================+===================== + */ + +typedef void (*xpc_channel_func) (enum xpc_retval reason, partid_t partid, + int ch_number, void *data, void *key); + +typedef void (*xpc_notify_func) (enum xpc_retval reason, partid_t partid, + int ch_number, void *key); + +/* + * The following is a registration entry. There is a global array of these, + * one per channel. It is used to record the connection registration made + * by the users of XPC. As long as a registration entry exists, for any + * partition that comes up, XPC will attempt to establish a connection on + * that channel. Notification that a connection has been made will occur via + * the xpc_channel_func function. + * + * The 'func' field points to the function to call when aynchronous + * notification is required for such events as: a connection established/lost, + * or an incoming message received, or an error condition encountered. A + * non-NULL 'func' field indicates that there is an active registration for + * the channel. + */ +struct xpc_registration { + struct mutex mutex; + xpc_channel_func func; /* function to call */ + void *key; /* pointer to user's key */ + u16 nentries; /* #of msg entries in local msg queue */ + u16 msg_size; /* message queue's message size */ + u32 assigned_limit; /* limit on #of assigned kthreads */ + u32 idle_limit; /* limit on #of idle kthreads */ +} ____cacheline_aligned; + +#define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL) + +/* the following are valid xpc_allocate() flags */ +#define XPC_WAIT 0 /* wait flag */ +#define XPC_NOWAIT 1 /* no wait flag */ + +struct xpc_interface { + void (*connect) (int); + void (*disconnect) (int); + enum xpc_retval (*allocate) (partid_t, int, u32, void **); + enum xpc_retval (*send) (partid_t, int, void *); + enum xpc_retval (*send_notify) (partid_t, int, void *, + xpc_notify_func, void *); + void (*received) (partid_t, int, void *); + enum xpc_retval (*partid_to_nasids) (partid_t, void *); +}; + +extern struct xpc_interface xpc_interface; + +extern void xpc_set_interface(void (*)(int), + void (*)(int), + enum xpc_retval (*)(partid_t, int, u32, void **), + enum xpc_retval (*)(partid_t, int, void *), + enum xpc_retval (*)(partid_t, int, void *, + xpc_notify_func, void *), + void (*)(partid_t, int, void *), + enum xpc_retval (*)(partid_t, void *)); +extern void xpc_clear_interface(void); + +extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16, + u16, u32, u32); +extern void xpc_disconnect(int); + +static inline enum xpc_retval +xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload) +{ + return xpc_interface.allocate(partid, ch_number, flags, payload); +} + +static inline enum xpc_retval +xpc_send(partid_t partid, int ch_number, void *payload) +{ + return xpc_interface.send(partid, ch_number, payload); +} + +static inline enum xpc_retval +xpc_send_notify(partid_t partid, int ch_number, void *payload, + xpc_notify_func func, void *key) +{ + return xpc_interface.send_notify(partid, ch_number, payload, func, key); +} + +static inline void +xpc_received(partid_t partid, int ch_number, void *payload) +{ + return xpc_interface.received(partid, ch_number, payload); +} + +static inline enum xpc_retval +xpc_partid_to_nasids(partid_t partid, void *nasids) +{ + return xpc_interface.partid_to_nasids(partid, nasids); +} + +extern u64 xp_nofault_PIOR_target; +extern int xp_nofault_PIOR(void *); +extern int xp_error_PIOR(void); + +#endif /* _DRIVERS_MISC_SGIXP_XP_H */ diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c new file mode 100644 index 0000000..1fbf99b --- /dev/null +++ b/drivers/misc/sgi-xp/xp_main.c @@ -0,0 +1,279 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition (XP) base. + * + * XP provides a base from which its users can interact + * with XPC, yet not be dependent on XPC. + * + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <asm/sn/intr.h> +#include <asm/sn/sn_sal.h> +#include "xp.h" + +/* + * The export of xp_nofault_PIOR needs to happen here since it is defined + * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is + * defined here. + */ +EXPORT_SYMBOL_GPL(xp_nofault_PIOR); + +u64 xp_nofault_PIOR_target; +EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); + +/* + * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level + * users of XPC. + */ +struct xpc_registration xpc_registrations[XPC_NCHANNELS]; +EXPORT_SYMBOL_GPL(xpc_registrations); + +/* + * Initialize the XPC interface to indicate that XPC isn't loaded. + */ +static enum xpc_retval +xpc_notloaded(void) +{ + return xpcNotLoaded; +} + +struct xpc_interface xpc_interface = { + (void (*)(int))xpc_notloaded, + (void (*)(int))xpc_notloaded, + (enum xpc_retval(*)(partid_t, int, u32, void **))xpc_notloaded, + (enum xpc_retval(*)(partid_t, int, void *))xpc_notloaded, + (enum xpc_retval(*)(partid_t, int, void *, xpc_notify_func, void *)) + xpc_notloaded, + (void (*)(partid_t, int, void *))xpc_notloaded, + (enum xpc_retval(*)(partid_t, void *))xpc_notloaded +}; +EXPORT_SYMBOL_GPL(xpc_interface); + +/* + * XPC calls this when it (the XPC module) has been loaded. + */ +void +xpc_set_interface(void (*connect) (int), + void (*disconnect) (int), + enum xpc_retval (*allocate) (partid_t, int, u32, void **), + enum xpc_retval (*send) (partid_t, int, void *), + enum xpc_retval (*send_notify) (partid_t, int, void *, + xpc_notify_func, void *), + void (*received) (partid_t, int, void *), + enum xpc_retval (*partid_to_nasids) (partid_t, void *)) +{ + xpc_interface.connect = connect; + xpc_interface.disconnect = disconnect; + xpc_interface.allocate = allocate; + xpc_interface.send = send; + xpc_interface.send_notify = send_notify; + xpc_interface.received = received; + xpc_interface.partid_to_nasids = partid_to_nasids; +} +EXPORT_SYMBOL_GPL(xpc_set_interface); + +/* + * XPC calls this when it (the XPC module) is being unloaded. + */ +void +xpc_clear_interface(void) +{ + xpc_interface.connect = (void (*)(int))xpc_notloaded; + xpc_interface.disconnect = (void (*)(int))xpc_notloaded; + xpc_interface.allocate = (enum xpc_retval(*)(partid_t, int, u32, + void **))xpc_notloaded; + xpc_interface.send = (enum xpc_retval(*)(partid_t, int, void *)) + xpc_notloaded; + xpc_interface.send_notify = (enum xpc_retval(*)(partid_t, int, void *, + xpc_notify_func, + void *))xpc_notloaded; + xpc_interface.received = (void (*)(partid_t, int, void *)) + xpc_notloaded; + xpc_interface.partid_to_nasids = (enum xpc_retval(*)(partid_t, void *)) + xpc_notloaded; +} +EXPORT_SYMBOL_GPL(xpc_clear_interface); + +/* + * Register for automatic establishment of a channel connection whenever + * a partition comes up. + * + * Arguments: + * + * ch_number - channel # to register for connection. + * func - function to call for asynchronous notification of channel + * state changes (i.e., connection, disconnection, error) and + * the arrival of incoming messages. + * key - pointer to optional user-defined value that gets passed back + * to the user on any callouts made to func. + * payload_size - size in bytes of the XPC message's payload area which + * contains a user-defined message. The user should make + * this large enough to hold their largest message. + * nentries - max #of XPC message entries a message queue can contain. + * The actual number, which is determined when a connection + * is established and may be less then requested, will be + * passed to the user via the xpcConnected callout. + * assigned_limit - max number of kthreads allowed to be processing + * messages (per connection) at any given instant. + * idle_limit - max number of kthreads allowed to be idle at any given + * instant. + */ +enum xpc_retval +xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, + u16 nentries, u32 assigned_limit, u32 idle_limit) +{ + struct xpc_registration *registration; + + DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(payload_size == 0 || nentries == 0); + DBUG_ON(func == NULL); + DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit); + + registration = &xpc_registrations[ch_number]; + + if (mutex_lock_interruptible(®istration->mutex) != 0) + return xpcInterrupted; + + /* if XPC_CHANNEL_REGISTERED(ch_number) */ + if (registration->func != NULL) { + mutex_unlock(®istration->mutex); + return xpcAlreadyRegistered; + } + + /* register the channel for connection */ + registration->msg_size = XPC_MSG_SIZE(payload_size); + registration->nentries = nentries; + registration->assigned_limit = assigned_limit; + registration->idle_limit = idle_limit; + registration->key = key; + registration->func = func; + + mutex_unlock(®istration->mutex); + + xpc_interface.connect(ch_number); + + return xpcSuccess; +} +EXPORT_SYMBOL_GPL(xpc_connect); + +/* + * Remove the registration for automatic connection of the specified channel + * when a partition comes up. + * + * Before returning this xpc_disconnect() will wait for all connections on the + * specified channel have been closed/torndown. So the caller can be assured + * that they will not be receiving any more callouts from XPC to their + * function registered via xpc_connect(). + * + * Arguments: + * + * ch_number - channel # to unregister. + */ +void +xpc_disconnect(int ch_number) +{ + struct xpc_registration *registration; + + DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + + registration = &xpc_registrations[ch_number]; + + /* + * We've decided not to make this a down_interruptible(), since we + * figured XPC's users will just turn around and call xpc_disconnect() + * again anyways, so we might as well wait, if need be. + */ + mutex_lock(®istration->mutex); + + /* if !XPC_CHANNEL_REGISTERED(ch_number) */ + if (registration->func == NULL) { + mutex_unlock(®istration->mutex); + return; + } + + /* remove the connection registration for the specified channel */ + registration->func = NULL; + registration->key = NULL; + registration->nentries = 0; + registration->msg_size = 0; + registration->assigned_limit = 0; + registration->idle_limit = 0; + + xpc_interface.disconnect(ch_number); + + mutex_unlock(®istration->mutex); + + return; +} +EXPORT_SYMBOL_GPL(xpc_disconnect); + +int __init +xp_init(void) +{ + int ret, ch_number; + u64 func_addr = *(u64 *)xp_nofault_PIOR; + u64 err_func_addr = *(u64 *)xp_error_PIOR; + + if (!ia64_platform_is("sn2")) + return -ENODEV; + + /* + * Register a nofault code region which performs a cross-partition + * PIO read. If the PIO read times out, the MCA handler will consume + * the error and return to a kernel-provided instruction to indicate + * an error. This PIO read exists because it is guaranteed to timeout + * if the destination is down (AMO operations do not timeout on at + * least some CPUs on Shubs <= v1.2, which unfortunately we have to + * work around). + */ + ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, + 1, 1); + if (ret != 0) { + printk(KERN_ERR "XP: can't register nofault code, error=%d\n", + ret); + } + /* + * Setup the nofault PIO read target. (There is no special reason why + * SH_IPI_ACCESS was selected.) + */ + if (is_shub2()) + xp_nofault_PIOR_target = SH2_IPI_ACCESS0; + else + xp_nofault_PIOR_target = SH1_IPI_ACCESS; + + /* initialize the connection registration mutex */ + for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++) + mutex_init(&xpc_registrations[ch_number].mutex); + + return 0; +} + +module_init(xp_init); + +void __exit +xp_exit(void) +{ + u64 func_addr = *(u64 *)xp_nofault_PIOR; + u64 err_func_addr = *(u64 *)xp_error_PIOR; + + /* unregister the PIO read nofault code region */ + (void)sn_register_nofault_code(func_addr, err_func_addr, + err_func_addr, 1, 0); +} + +module_exit(xp_exit); + +MODULE_AUTHOR("Silicon Graphics, Inc."); +MODULE_DESCRIPTION("Cross Partition (XP) base"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/sgi-xp/xp_nofault.S b/drivers/misc/sgi-xp/xp_nofault.S new file mode 100644 index 0000000..e38d433 --- /dev/null +++ b/drivers/misc/sgi-xp/xp_nofault.S @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * The xp_nofault_PIOR function takes a pointer to a remote PIO register + * and attempts to load and consume a value from it. This function + * will be registered as a nofault code block. In the event that the + * PIO read fails, the MCA handler will force the error to look + * corrected and vector to the xp_error_PIOR which will return an error. + * + * The definition of "consumption" and the time it takes for an MCA + * to surface is processor implementation specific. This code + * is sufficient on Itanium through the Montvale processor family. + * It may need to be adjusted for future processor implementations. + * + * extern int xp_nofault_PIOR(void *remote_register); + */ + + .global xp_nofault_PIOR +xp_nofault_PIOR: + mov r8=r0 // Stage a success return value + ld8.acq r9=[r32];; // PIO Read the specified register + adds r9=1,r9;; // Add to force consumption + srlz.i;; // Allow time for MCA to surface + br.ret.sptk.many b0;; // Return success + + .global xp_error_PIOR +xp_error_PIOR: + mov r8=1 // Return value of 1 + br.ret.sptk.many b0;; // Return failure diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h new file mode 100644 index 0000000..9eb6d4a --- /dev/null +++ b/drivers/misc/sgi-xp/xpc.h @@ -0,0 +1,1187 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) structures and macros. + */ + +#ifndef _DRIVERS_MISC_SGIXP_XPC_H +#define _DRIVERS_MISC_SGIXP_XPC_H + +#include <linux/interrupt.h> +#include <linux/sysctl.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/sn/bte.h> +#include <asm/sn/clksupport.h> +#include <asm/sn/addrs.h> +#include <asm/sn/mspec.h> +#include <asm/sn/shub_mmr.h> +#include "xp.h" + +/* + * XPC Version numbers consist of a major and minor number. XPC can always + * talk to versions with same major #, and never talk to versions with a + * different major #. + */ +#define _XPC_VERSION(_maj, _min) (((_maj) << 4) | ((_min) & 0xf)) +#define XPC_VERSION_MAJOR(_v) ((_v) >> 4) +#define XPC_VERSION_MINOR(_v) ((_v) & 0xf) + +/* + * The next macros define word or bit representations for given + * C-brick nasid in either the SAL provided bit array representing + * nasids in the partition/machine or the AMO_t array used for + * inter-partition initiation communications. + * + * For SN2 machines, C-Bricks are alway even numbered NASIDs. As + * such, some space will be saved by insisting that nasid information + * passed from SAL always be packed for C-Bricks and the + * cross-partition interrupts use the same packing scheme. + */ +#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2) +#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1)) +#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \ + (1UL << XPC_NASID_B_INDEX(_n))) +#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) + +#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ +#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ + +/* define the process name of HB checker and the CPU it is pinned to */ +#define XPC_HB_CHECK_THREAD_NAME "xpc_hb" +#define XPC_HB_CHECK_CPU 0 + +/* define the process name of the discovery thread */ +#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery" + +/* + * the reserved page + * + * SAL reserves one page of memory per partition for XPC. Though a full page + * in length (16384 bytes), its starting address is not page aligned, but it + * is cacheline aligned. The reserved page consists of the following: + * + * reserved page header + * + * The first cacheline of the reserved page contains the header + * (struct xpc_rsvd_page). Before SAL initialization has completed, + * SAL has set up the following fields of the reserved page header: + * SAL_signature, SAL_version, partid, and nasids_size. The other + * fields are set up by XPC. (xpc_rsvd_page points to the local + * partition's reserved page.) + * + * part_nasids mask + * mach_nasids mask + * + * SAL also sets up two bitmaps (or masks), one that reflects the actual + * nasids in this partition (part_nasids), and the other that reflects + * the actual nasids in the entire machine (mach_nasids). We're only + * interested in the even numbered nasids (which contain the processors + * and/or memory), so we only need half as many bits to represent the + * nasids. The part_nasids mask is located starting at the first cacheline + * following the reserved page header. The mach_nasids mask follows right + * after the part_nasids mask. The size in bytes of each mask is reflected + * by the reserved page header field 'nasids_size'. (Local partition's + * mask pointers are xpc_part_nasids and xpc_mach_nasids.) + * + * vars + * vars part + * + * Immediately following the mach_nasids mask are the XPC variables + * required by other partitions. First are those that are generic to all + * partitions (vars), followed on the next available cacheline by those + * which are partition specific (vars part). These are setup by XPC. + * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) + * + * Note: Until vars_pa is set, the partition XPC code has not been initialized. + */ +struct xpc_rsvd_page { + u64 SAL_signature; /* SAL: unique signature */ + u64 SAL_version; /* SAL: version */ + u8 partid; /* SAL: partition ID */ + u8 version; + u8 pad1[6]; /* align to next u64 in cacheline */ + u64 vars_pa; /* physical address of struct xpc_vars */ + struct timespec stamp; /* time when reserved page was setup by XPC */ + u64 pad2[9]; /* align to last u64 in cacheline */ + u64 nasids_size; /* SAL: size of each nasid mask in bytes */ +}; + +#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */ + +#define XPC_SUPPORTS_RP_STAMP(_version) \ + (_version >= _XPC_VERSION(1, 1)) + +/* + * compare stamps - the return value is: + * + * < 0, if stamp1 < stamp2 + * = 0, if stamp1 == stamp2 + * > 0, if stamp1 > stamp2 + */ +static inline int +xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) +{ + int ret; + + ret = stamp1->tv_sec - stamp2->tv_sec; + if (ret == 0) + ret = stamp1->tv_nsec - stamp2->tv_nsec; + + return ret; +} + +/* + * Define the structures by which XPC variables can be exported to other + * partitions. (There are two: struct xpc_vars and struct xpc_vars_part) + */ + +/* + * The following structure describes the partition generic variables + * needed by other partitions in order to properly initialize. + * + * struct xpc_vars version number also applies to struct xpc_vars_part. + * Changes to either structure and/or related functionality should be + * reflected by incrementing either the major or minor version numbers + * of struct xpc_vars. + */ +struct xpc_vars { + u8 version; + u64 heartbeat; + u64 heartbeating_to_mask; + u64 heartbeat_offline; /* if 0, heartbeat should be changing */ + int act_nasid; + int act_phys_cpuid; + u64 vars_part_pa; + u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ + AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ +}; + +#define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ + +#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ + (_version >= _XPC_VERSION(3, 1)) + +static inline int +xpc_hb_allowed(partid_t partid, struct xpc_vars *vars) +{ + return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); +} + +static inline void +xpc_allow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask | (1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + +static inline void +xpc_disallow_hb(partid_t partid, struct xpc_vars *vars) +{ + u64 old_mask, new_mask; + + do { + old_mask = vars->heartbeating_to_mask; + new_mask = (old_mask & ~(1UL << partid)); + } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != + old_mask); +} + +/* + * The AMOs page consists of a number of AMO variables which are divided into + * four groups, The first two groups are used to identify an IRQ's sender. + * These two groups consist of 64 and 128 AMO variables respectively. The last + * two groups, consisting of just one AMO variable each, are used to identify + * the remote partitions that are currently engaged (from the viewpoint of + * the XPC running on the remote partition). + */ +#define XPC_NOTIFY_IRQ_AMOS 0 +#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) +#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) +#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) + +/* + * The following structure describes the per partition specific variables. + * + * An array of these structures, one per partition, will be defined. As a + * partition becomes active XPC will copy the array entry corresponding to + * itself from that partition. It is desirable that the size of this + * structure evenly divide into a cacheline, such that none of the entries + * in this array crosses a cacheline boundary. As it is now, each entry + * occupies half a cacheline. + */ +struct xpc_vars_part { + u64 magic; + + u64 openclose_args_pa; /* physical address of open and close args */ + u64 GPs_pa; /* physical address of Get/Put values */ + + u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */ + int IPI_nasid; /* nasid of where to send IPIs */ + int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */ + + u8 nchannels; /* #of defined channels supported */ + + u8 reserved[23]; /* pad to a full 64 bytes */ +}; + +/* + * The vars_part MAGIC numbers play a part in the first contact protocol. + * + * MAGIC1 indicates that the per partition specific variables for a remote + * partition have been initialized by this partition. + * + * MAGIC2 indicates that this partition has pulled the remote partititions + * per partition variables that pertain to this partition. + */ +#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ +#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ + +/* the reserved page sizes and offsets */ + +#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) +#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) + +#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) +#define XPC_RP_VARS(_rp) ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \ + xp_nasid_mask_words)) +#define XPC_RP_VARS_PART(_rp) ((struct xpc_vars_part *) \ + ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE)) + +/* + * Functions registered by add_timer() or called by kernel_thread() only + * allow for a single 64-bit argument. The following macros can be used to + * pack and unpack two (32-bit, 16-bit or 8-bit) arguments into or out from + * the passed argument. + */ +#define XPC_PACK_ARGS(_arg1, _arg2) \ + ((((u64) _arg1) & 0xffffffff) | \ + ((((u64) _arg2) & 0xffffffff) << 32)) + +#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff) +#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff) + +/* + * Define a Get/Put value pair (pointers) used with a message queue. + */ +struct xpc_gp { + s64 get; /* Get value */ + s64 put; /* Put value */ +}; + +#define XPC_GP_SIZE \ + L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS) + +/* + * Define a structure that contains arguments associated with opening and + * closing a channel. + */ +struct xpc_openclose_args { + u16 reason; /* reason why channel is closing */ + u16 msg_size; /* sizeof each message entry */ + u16 remote_nentries; /* #of message entries in remote msg queue */ + u16 local_nentries; /* #of message entries in local msg queue */ + u64 local_msgqueue_pa; /* physical address of local message queue */ +}; + +#define XPC_OPENCLOSE_ARGS_SIZE \ + L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS) + +/* struct xpc_msg flags */ + +#define XPC_M_DONE 0x01 /* msg has been received/consumed */ +#define XPC_M_READY 0x02 /* msg is ready to be sent */ +#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */ + +#define XPC_MSG_ADDRESS(_payload) \ + ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET)) + +/* + * Defines notify entry. + * + * This is used to notify a message's sender that their message was received + * and consumed by the intended recipient. + */ +struct xpc_notify { + u8 type; /* type of notification */ + + /* the following two fields are only used if type == XPC_N_CALL */ + xpc_notify_func func; /* user's notify function */ + void *key; /* pointer to user's key */ +}; + +/* struct xpc_notify type of notification */ + +#define XPC_N_CALL 0x01 /* notify function provided by user */ + +/* + * Define the structure that manages all the stuff required by a channel. In + * particular, they are used to manage the messages sent across the channel. + * + * This structure is private to a partition, and is NOT shared across the + * partition boundary. + * + * There is an array of these structures for each remote partition. It is + * allocated at the time a partition becomes active. The array contains one + * of these structures for each potential channel connection to that partition. + * + * Each of these structures manages two message queues (circular buffers). + * They are allocated at the time a channel connection is made. One of + * these message queues (local_msgqueue) holds the locally created messages + * that are destined for the remote partition. The other of these message + * queues (remote_msgqueue) is a locally cached copy of the remote partition's + * own local_msgqueue. + * + * The following is a description of the Get/Put pointers used to manage these + * two message queues. Consider the local_msgqueue to be on one partition + * and the remote_msgqueue to be its cached copy on another partition. A + * description of what each of the lettered areas contains is included. + * + * + * local_msgqueue remote_msgqueue + * + * |/////////| |/////////| + * w_remote_GP.get --> +---------+ |/////////| + * | F | |/////////| + * remote_GP.get --> +---------+ +---------+ <-- local_GP->get + * | | | | + * | | | E | + * | | | | + * | | +---------+ <-- w_local_GP.get + * | B | |/////////| + * | | |////D////| + * | | |/////////| + * | | +---------+ <-- w_remote_GP.put + * | | |////C////| + * local_GP->put --> +---------+ +---------+ <-- remote_GP.put + * | | |/////////| + * | A | |/////////| + * | | |/////////| + * w_local_GP.put --> +---------+ |/////////| + * |/////////| |/////////| + * + * + * ( remote_GP.[get|put] are cached copies of the remote + * partition's local_GP->[get|put], and thus their values can + * lag behind their counterparts on the remote partition. ) + * + * + * A - Messages that have been allocated, but have not yet been sent to the + * remote partition. + * + * B - Messages that have been sent, but have not yet been acknowledged by the + * remote partition as having been received. + * + * C - Area that needs to be prepared for the copying of sent messages, by + * the clearing of the message flags of any previously received messages. + * + * D - Area into which sent messages are to be copied from the remote + * partition's local_msgqueue and then delivered to their intended + * recipients. [ To allow for a multi-message copy, another pointer + * (next_msg_to_pull) has been added to keep track of the next message + * number needing to be copied (pulled). It chases after w_remote_GP.put. + * Any messages lying between w_local_GP.get and next_msg_to_pull have + * been copied and are ready to be delivered. ] + * + * E - Messages that have been copied and delivered, but have not yet been + * acknowledged by the recipient as having been received. + * + * F - Messages that have been acknowledged, but XPC has not yet notified the + * sender that the message was received by its intended recipient. + * This is also an area that needs to be prepared for the allocating of + * new messages, by the clearing of the message flags of the acknowledged + * messages. + */ +struct xpc_channel { + partid_t partid; /* ID of remote partition connected */ + spinlock_t lock; /* lock for updating this structure */ + u32 flags; /* general flags */ + + enum xpc_retval reason; /* reason why channel is disconnect'g */ + int reason_line; /* line# disconnect initiated from */ + + u16 number; /* channel # */ + + u16 msg_size; /* sizeof each msg entry */ + u16 local_nentries; /* #of msg entries in local msg queue */ + u16 remote_nentries; /* #of msg entries in remote msg queue */ + + void *local_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg *local_msgqueue; /* local message queue */ + void *remote_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ + /* local message queue */ + u64 remote_msgqueue_pa; /* phys addr of remote partition's */ + /* local message queue */ + + atomic_t references; /* #of external references to queues */ + + atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ + wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ + + u8 delayed_IPI_flags; /* IPI flags received, but delayed */ + /* action until channel disconnected */ + + /* queue of msg senders who want to be notified when msg received */ + + atomic_t n_to_notify; /* #of msg senders to notify */ + struct xpc_notify *notify_queue; /* notify queue for messages sent */ + + xpc_channel_func func; /* user's channel function */ + void *key; /* pointer to user's key */ + + struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ + struct completion wdisconnect_wait; /* wait for channel disconnect */ + + struct xpc_openclose_args *local_openclose_args; /* args passed on */ + /* opening or closing of channel */ + + /* various flavors of local and remote Get/Put values */ + + struct xpc_gp *local_GP; /* local Get/Put values */ + struct xpc_gp remote_GP; /* remote Get/Put values */ + struct xpc_gp w_local_GP; /* working local Get/Put values */ + struct xpc_gp w_remote_GP; /* working remote Get/Put values */ + s64 next_msg_to_pull; /* Put value of next msg to pull */ + + /* kthread management related fields */ + + atomic_t kthreads_assigned; /* #of kthreads assigned to channel */ + u32 kthreads_assigned_limit; /* limit on #of kthreads assigned */ + atomic_t kthreads_idle; /* #of kthreads idle waiting for work */ + u32 kthreads_idle_limit; /* limit on #of kthreads idle */ + atomic_t kthreads_active; /* #of kthreads actively working */ + + wait_queue_head_t idle_wq; /* idle kthread wait queue */ + +} ____cacheline_aligned; + +/* struct xpc_channel flags */ + +#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */ + +#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */ +#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */ +#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */ +#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */ + +#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */ +#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */ +#define XPC_C_CONNECTEDCALLOUT_MADE \ + 0x00000080 /* connected callout completed */ +#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */ +#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */ + +#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */ +#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */ +#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */ +#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */ + +#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */ +#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */ +#define XPC_C_DISCONNECTINGCALLOUT \ + 0x00010000 /* disconnecting callout initiated */ +#define XPC_C_DISCONNECTINGCALLOUT_MADE \ + 0x00020000 /* disconnecting callout completed */ +#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */ + +/* + * Manages channels on a partition basis. There is one of these structures + * for each partition (a partition will never utilize the structure that + * represents itself). + */ +struct xpc_partition { + + /* XPC HB infrastructure */ + + u8 remote_rp_version; /* version# of partition's rsvd pg */ + struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */ + u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ + u64 remote_vars_pa; /* phys addr of partition's vars */ + u64 remote_vars_part_pa; /* phys addr of partition's vars part */ + u64 last_heartbeat; /* HB at last read */ + u64 remote_amos_page_pa; /* phys addr of partition's amos page */ + int remote_act_nasid; /* active part's act/deact nasid */ + int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */ + u32 act_IRQ_rcvd; /* IRQs since activation */ + spinlock_t act_lock; /* protect updating of act_state */ + u8 act_state; /* from XPC HB viewpoint */ + u8 remote_vars_version; /* version# of partition's vars */ + enum xpc_retval reason; /* reason partition is deactivating */ + int reason_line; /* line# deactivation initiated from */ + int reactivate_nasid; /* nasid in partition to reactivate */ + + unsigned long disengage_request_timeout; /* timeout in jiffies */ + struct timer_list disengage_request_timer; + + /* XPC infrastructure referencing and teardown control */ + + u8 setup_state; /* infrastructure setup state */ + wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ + atomic_t references; /* #of references to infrastructure */ + + /* + * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN + * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION + * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE + * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.) + */ + + u8 nchannels; /* #of defined channels supported */ + atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ + atomic_t nchannels_engaged; /* #of channels engaged with remote part */ + struct xpc_channel *channels; /* array of channel structures */ + + void *local_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp *local_GPs; /* local Get/Put values */ + void *remote_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp *remote_GPs; /* copy of remote partition's local */ + /* Get/Put values */ + u64 remote_GPs_pa; /* phys address of remote partition's local */ + /* Get/Put values */ + + /* fields used to pass args when opening or closing a channel */ + + void *local_openclose_args_base; /* base address of kmalloc'd space */ + struct xpc_openclose_args *local_openclose_args; /* local's args */ + void *remote_openclose_args_base; /* base address of kmalloc'd space */ + struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ + /* args */ + u64 remote_openclose_args_pa; /* phys addr of remote's args */ + + /* IPI sending, receiving and handling related fields */ + + int remote_IPI_nasid; /* nasid of where to send IPIs */ + int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ + AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ + + AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ + u64 local_IPI_amo; /* IPI amo flags yet to be handled */ + char IPI_owner[8]; /* IPI owner's name */ + struct timer_list dropped_IPI_timer; /* dropped IPI timer */ + + spinlock_t IPI_lock; /* IPI handler lock */ + + /* channel manager related fields */ + + atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */ + wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */ + +} ____cacheline_aligned; + +/* struct xpc_partition act_state values (for XPC HB) */ + +#define XPC_P_INACTIVE 0x00 /* partition is not active */ +#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */ +#define XPC_P_ACTIVATING 0x02 /* activation thread started */ +#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */ +#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */ + +#define XPC_DEACTIVATE_PARTITION(_p, _reason) \ + xpc_deactivate_partition(__LINE__, (_p), (_reason)) + +/* struct xpc_partition setup_state values */ + +#define XPC_P_UNSET 0x00 /* infrastructure was never setup */ +#define XPC_P_SETUP 0x01 /* infrastructure is setup */ +#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ +#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ + +/* + * struct xpc_partition IPI_timer #of seconds to wait before checking for + * dropped IPIs. These occur whenever an IPI amo write doesn't complete until + * after the IPI was received. + */ +#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) + +/* number of seconds to wait for other partitions to disengage */ +#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 + +/* interval in seconds to print 'waiting disengagement' messages */ +#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 + +#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0])) + +/* found in xp_main.c */ +extern struct xpc_registration xpc_registrations[]; + +/* found in xpc_main.c */ +extern struct device *xpc_part; +extern struct device *xpc_chan; +extern int xpc_disengage_request_timelimit; +extern int xpc_disengage_request_timedout; +extern irqreturn_t xpc_notify_IRQ_handler(int, void *); +extern void xpc_dropped_IPI_check(struct xpc_partition *); +extern void xpc_activate_partition(struct xpc_partition *); +extern void xpc_activate_kthreads(struct xpc_channel *, int); +extern void xpc_create_kthreads(struct xpc_channel *, int, int); +extern void xpc_disconnect_wait(int); + +/* found in xpc_partition.c */ +extern int xpc_exiting; +extern struct xpc_vars *xpc_vars; +extern struct xpc_rsvd_page *xpc_rsvd_page; +extern struct xpc_vars_part *xpc_vars_part; +extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; +extern char *xpc_remote_copy_buffer; +extern void *xpc_remote_copy_buffer_base; +extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); +extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); +extern void xpc_allow_IPI_ops(void); +extern void xpc_restrict_IPI_ops(void); +extern int xpc_identify_act_IRQ_sender(void); +extern int xpc_partition_disengaged(struct xpc_partition *); +extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *); +extern void xpc_mark_partition_inactive(struct xpc_partition *); +extern void xpc_discovery(void); +extern void xpc_check_remote_hb(void); +extern void xpc_deactivate_partition(const int, struct xpc_partition *, + enum xpc_retval); +extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *); + +/* found in xpc_channel.c */ +extern void xpc_initiate_connect(int); +extern void xpc_initiate_disconnect(int); +extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **); +extern enum xpc_retval xpc_initiate_send(partid_t, int, void *); +extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *, + xpc_notify_func, void *); +extern void xpc_initiate_received(partid_t, int, void *); +extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *); +extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *); +extern void xpc_process_channel_activity(struct xpc_partition *); +extern void xpc_connected_callout(struct xpc_channel *); +extern void xpc_deliver_msg(struct xpc_channel *); +extern void xpc_disconnect_channel(const int, struct xpc_channel *, + enum xpc_retval, unsigned long *); +extern void xpc_disconnect_callout(struct xpc_channel *, enum xpc_retval); +extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval); +extern void xpc_teardown_infrastructure(struct xpc_partition *); + +static inline void +xpc_wakeup_channel_mgr(struct xpc_partition *part) +{ + if (atomic_inc_return(&part->channel_mgr_requests) == 1) + wake_up(&part->channel_mgr_wq); +} + +/* + * These next two inlines are used to keep us from tearing down a channel's + * msg queues while a thread may be referencing them. + */ +static inline void +xpc_msgqueue_ref(struct xpc_channel *ch) +{ + atomic_inc(&ch->references); +} + +static inline void +xpc_msgqueue_deref(struct xpc_channel *ch) +{ + s32 refs = atomic_dec_return(&ch->references); + + DBUG_ON(refs < 0); + if (refs == 0) + xpc_wakeup_channel_mgr(&xpc_partitions[ch->partid]); +} + +#define XPC_DISCONNECT_CHANNEL(_ch, _reason, _irqflgs) \ + xpc_disconnect_channel(__LINE__, _ch, _reason, _irqflgs) + +/* + * These two inlines are used to keep us from tearing down a partition's + * setup infrastructure while a thread may be referencing it. + */ +static inline void +xpc_part_deref(struct xpc_partition *part) +{ + s32 refs = atomic_dec_return(&part->references); + + DBUG_ON(refs < 0); + if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) + wake_up(&part->teardown_wq); +} + +static inline int +xpc_part_ref(struct xpc_partition *part) +{ + int setup; + + atomic_inc(&part->references); + setup = (part->setup_state == XPC_P_SETUP); + if (!setup) + xpc_part_deref(part); + + return setup; +} + +/* + * The following macro is to be used for the setting of the reason and + * reason_line fields in both the struct xpc_channel and struct xpc_partition + * structures. + */ +#define XPC_SET_REASON(_p, _reason, _line) \ + { \ + (_p)->reason = _reason; \ + (_p)->reason_line = _line; \ + } + +/* + * This next set of inlines are used to keep track of when a partition is + * potentially engaged in accessing memory belonging to another partition. + */ + +static inline void +xpc_mark_partition_engaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_mark_partition_disengaged(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_request_partition_disengage(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline void +xpc_cancel_partition_disengage_request(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static inline u64 +xpc_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline u64 +xpc_partition_disengage_requested(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static inline void +xpc_clear_partition_engaged(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~partid_mask); +} + +static inline void +xpc_clear_partition_disengage_request(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~partid_mask); +} + +/* + * The following set of macros and inlines are used for the sending and + * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, + * one that is associated with partition activity (SGI_XPC_ACTIVATE) and + * the other that is associated with channel activity (SGI_XPC_NOTIFY). + */ + +static inline u64 +xpc_IPI_receive(AMO_t *amo) +{ + return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); +} + +static inline enum xpc_retval +xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) +{ + int ret = 0; + unsigned long irq_flags; + + local_irq_save(irq_flags); + + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag); + sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + return ((ret == 0) ? xpcSuccess : xpcPioReadError); +} + +/* + * IPIs associated with SGI_XPC_ACTIVATE IRQ. + */ + +/* + * Flag the appropriate AMO variable and send an IPI to the specified node. + */ +static inline void +xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, + int to_phys_cpuid) +{ + int w_index = XPC_NASID_W_INDEX(from_nasid); + int b_index = XPC_NASID_B_INDEX(from_nasid); + AMO_t *amos = (AMO_t *)__va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); + + (void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, + to_phys_cpuid, SGI_XPC_ACTIVATE); +} + +static inline void +xpc_IPI_send_activate(struct xpc_vars *vars) +{ + xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0), + vars->act_nasid, vars->act_phys_cpuid); +} + +static inline void +xpc_IPI_send_activated(struct xpc_partition *part) +{ + xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), + part->remote_act_nasid, + part->remote_act_phys_cpuid); +} + +static inline void +xpc_IPI_send_reactivate(struct xpc_partition *part) +{ + xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid, + xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); +} + +static inline void +xpc_IPI_send_disengage(struct xpc_partition *part) +{ + xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), + part->remote_act_nasid, + part->remote_act_phys_cpuid); +} + +/* + * IPIs associated with SGI_XPC_NOTIFY IRQ. + */ + +/* + * Send an IPI to the remote partition that is associated with the + * specified channel. + */ +#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \ + xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f) + +static inline void +xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string, + unsigned long *irq_flags) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + enum xpc_retval ret; + + if (likely(part->act_state != XPC_P_DEACTIVATING)) { + ret = xpc_IPI_send(part->remote_IPI_amo_va, + (u64)ipi_flag << (ch->number * 8), + part->remote_IPI_nasid, + part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY); + dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", + ipi_flag_string, ch->partid, ch->number, ret); + if (unlikely(ret != xpcSuccess)) { + if (irq_flags != NULL) + spin_unlock_irqrestore(&ch->lock, *irq_flags); + XPC_DEACTIVATE_PARTITION(part, ret); + if (irq_flags != NULL) + spin_lock_irqsave(&ch->lock, *irq_flags); + } + } +} + +/* + * Make it look like the remote partition, which is associated with the + * specified channel, sent us an IPI. This faked IPI will be handled + * by xpc_dropped_IPI_check(). + */ +#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \ + xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f) + +static inline void +xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, + char *ipi_flag_string) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + + FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable), + FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); + dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", + ipi_flag_string, ch->partid, ch->number); +} + +/* + * The sending and receiving of IPIs includes the setting of an AMO variable + * to indicate the reason the IPI was sent. The 64-bit variable is divided + * up into eight bytes, ordered from right to left. Byte zero pertains to + * channel 0, byte one to channel 1, and so on. Each byte is described by + * the following IPI flags. + */ + +#define XPC_IPI_CLOSEREQUEST 0x01 +#define XPC_IPI_CLOSEREPLY 0x02 +#define XPC_IPI_OPENREQUEST 0x04 +#define XPC_IPI_OPENREPLY 0x08 +#define XPC_IPI_MSGREQUEST 0x10 + +/* given an AMO variable and a channel#, get its associated IPI flags */ +#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) +#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) + +#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL) +#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010UL) + +static inline void +xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->reason = ch->reason; + + XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags); +} + +static inline void +xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags) +{ + XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags); +} + +static inline void +xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->msg_size = ch->msg_size; + args->local_nentries = ch->local_nentries; + + XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags); +} + +static inline void +xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->remote_nentries = ch->remote_nentries; + args->local_nentries = ch->local_nentries; + args->local_msgqueue_pa = __pa(ch->local_msgqueue); + + XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags); +} + +static inline void +xpc_IPI_send_msgrequest(struct xpc_channel *ch) +{ + XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL); +} + +static inline void +xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) +{ + XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST); +} + +/* + * Memory for XPC's AMO variables is allocated by the MSPEC driver. These + * pages are located in the lowest granule. The lowest granule uses 4k pages + * for cached references and an alternate TLB handler to never provide a + * cacheable mapping for the entire region. This will prevent speculative + * reading of cached copies of our lines from being issued which will cause + * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 + * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an + * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition + * activation and 2 AMO variables for partition deactivation. + */ +static inline AMO_t * +xpc_IPI_init(int index) +{ + AMO_t *amo = xpc_vars->amos_page + index; + + (void)xpc_IPI_receive(amo); /* clear AMO variable */ + return amo; +} + +static inline enum xpc_retval +xpc_map_bte_errors(bte_result_t error) +{ + if (error == BTE_SUCCESS) + return xpcSuccess; + + if (is_shub2()) { + if (BTE_VALID_SH2_ERROR(error)) + return xpcBteSh2Start + error; + return xpcBteUnmappedError; + } + switch (error) { + case BTE_SUCCESS: + return xpcSuccess; + case BTEFAIL_DIR: + return xpcBteDirectoryError; + case BTEFAIL_POISON: + return xpcBtePoisonError; + case BTEFAIL_WERR: + return xpcBteWriteError; + case BTEFAIL_ACCESS: + return xpcBteAccessError; + case BTEFAIL_PWERR: + return xpcBtePWriteError; + case BTEFAIL_PRERR: + return xpcBtePReadError; + case BTEFAIL_TOUT: + return xpcBteTimeOutError; + case BTEFAIL_XTERR: + return xpcBteXtalkError; + case BTEFAIL_NOTAVAIL: + return xpcBteNotAvailable; + default: + return xpcBteUnmappedError; + } +} + +/* + * Check to see if there is any channel activity to/from the specified + * partition. + */ +static inline void +xpc_check_for_channel_activity(struct xpc_partition *part) +{ + u64 IPI_amo; + unsigned long irq_flags; + + IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va); + if (IPI_amo == 0) + return; + + spin_lock_irqsave(&part->IPI_lock, irq_flags); + part->local_IPI_amo |= IPI_amo; + spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + + dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", + XPC_PARTID(part), IPI_amo); + + xpc_wakeup_channel_mgr(part); +} + +#endif /* _DRIVERS_MISC_SGIXP_XPC_H */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c new file mode 100644 index 0000000..bfcb9ea --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -0,0 +1,2243 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) channel support. + * + * This is the part of XPC that manages the channels and + * sends/receives messages across them to/from other partitions. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/cache.h> +#include <linux/interrupt.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <asm/sn/bte.h> +#include <asm/sn/sn_sal.h> +#include "xpc.h" + +/* + * Guarantee that the kzalloc'd memory is cacheline aligned. + */ +static void * +xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kzalloc will give us cachline aligned memory by default */ + *base = kzalloc(size, flags); + if (*base == NULL) + return NULL; + + if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) + return *base; + + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kzalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) + return NULL; + + return (void *)L1_CACHE_ALIGN((u64)*base); +} + +/* + * Set up the initial values for the XPartition Communication channels. + */ +static void +xpc_initialize_channels(struct xpc_partition *part, partid_t partid) +{ + int ch_number; + struct xpc_channel *ch; + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + ch->partid = partid; + ch->number = ch_number; + ch->flags = XPC_C_DISCONNECTED; + + ch->local_GP = &part->local_GPs[ch_number]; + ch->local_openclose_args = + &part->local_openclose_args[ch_number]; + + atomic_set(&ch->kthreads_assigned, 0); + atomic_set(&ch->kthreads_idle, 0); + atomic_set(&ch->kthreads_active, 0); + + atomic_set(&ch->references, 0); + atomic_set(&ch->n_to_notify, 0); + + spin_lock_init(&ch->lock); + mutex_init(&ch->msg_to_pull_mutex); + init_completion(&ch->wdisconnect_wait); + + atomic_set(&ch->n_on_msg_allocate_wq, 0); + init_waitqueue_head(&ch->msg_allocate_wq); + init_waitqueue_head(&ch->idle_wq); + } +} + +/* + * Setup the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +enum xpc_retval +xpc_setup_infrastructure(struct xpc_partition *part) +{ + int ret, cpuid; + struct timer_list *timer; + partid_t partid = XPC_PARTID(part); + + /* + * Zero out MOST of the entry for this partition. Only the fields + * starting with `nchannels' will be zeroed. The preceding fields must + * remain `viable' across partition ups and downs, since they may be + * referenced during this memset() operation. + */ + memset(&part->nchannels, 0, sizeof(struct xpc_partition) - + offsetof(struct xpc_partition, nchannels)); + + /* + * Allocate all of the channel structures as a contiguous chunk of + * memory. + */ + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS, + GFP_KERNEL); + if (part->channels == NULL) { + dev_err(xpc_chan, "can't get memory for channels\n"); + return xpcNoMemory; + } + + part->nchannels = XPC_NCHANNELS; + + /* allocate all the required GET/PUT values */ + + part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part->local_GPs_base); + if (part->local_GPs == NULL) { + kfree(part->channels); + part->channels = NULL; + dev_err(xpc_chan, "can't get memory for local get/put " + "values\n"); + return xpcNoMemory; + } + + part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part-> + remote_GPs_base); + if (part->remote_GPs == NULL) { + dev_err(xpc_chan, "can't get memory for remote get/put " + "values\n"); + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + return xpcNoMemory; + } + + /* allocate all the required open and close args */ + + part->local_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, + &part->local_openclose_args_base); + if (part->local_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for local connect args\n"); + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + return xpcNoMemory; + } + + part->remote_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, + &part->remote_openclose_args_base); + if (part->remote_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for remote connect args\n"); + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + return xpcNoMemory; + } + + xpc_initialize_channels(part, partid); + + atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); + + /* local_IPI_amo were set to 0 by an earlier memset() */ + + /* Initialize this partitions AMO_t structure */ + part->local_IPI_amo_va = xpc_IPI_init(partid); + + spin_lock_init(&part->IPI_lock); + + atomic_set(&part->channel_mgr_requests, 1); + init_waitqueue_head(&part->channel_mgr_wq); + + sprintf(part->IPI_owner, "xpc%02d", partid); + ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED, + part->IPI_owner, (void *)(u64)partid); + if (ret != 0) { + dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " + "errno=%d\n", -ret); + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + return xpcLackOfResources; + } + + /* Setup a timer to check for dropped IPIs */ + timer = &part->dropped_IPI_timer; + init_timer(timer); + timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check; + timer->data = (unsigned long)part; + timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT; + add_timer(timer); + + /* + * With the setting of the partition setup_state to XPC_P_SETUP, we're + * declaring that this partition is ready to go. + */ + part->setup_state = XPC_P_SETUP; + + /* + * Setup the per partition specific variables required by the + * remote partition to establish channel connections with us. + * + * The setting of the magic # indicates that these per partition + * specific variables are ready to be used. + */ + xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs); + xpc_vars_part[partid].openclose_args_pa = + __pa(part->local_openclose_args); + xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); + cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ + xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); + xpc_vars_part[partid].nchannels = part->nchannels; + xpc_vars_part[partid].magic = XPC_VP_MAGIC1; + + return xpcSuccess; +} + +/* + * Create a wrapper that hides the underlying mechanism for pulling a cacheline + * (or multiple cachelines) from a remote partition. + * + * src must be a cacheline aligned physical address on the remote partition. + * dst must be a cacheline aligned virtual address on this partition. + * cnt must be an cacheline sized + */ +static enum xpc_retval +xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, + const void *src, size_t cnt) +{ + bte_result_t bte_ret; + + DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); + DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); + DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); + + if (part->act_state == XPC_P_DEACTIVATING) + return part->reason; + + bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt, + (BTE_NORMAL | BTE_WACQUIRE), NULL); + if (bte_ret == BTE_SUCCESS) + return xpcSuccess; + + dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n", + XPC_PARTID(part), bte_ret); + + return xpc_map_bte_errors(bte_ret); +} + +/* + * Pull the remote per partition specific variables from the specified + * partition. + */ +enum xpc_retval +xpc_pull_remote_vars_part(struct xpc_partition *part) +{ + u8 buffer[L1_CACHE_BYTES * 2]; + struct xpc_vars_part *pulled_entry_cacheline = + (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer); + struct xpc_vars_part *pulled_entry; + u64 remote_entry_cacheline_pa, remote_entry_pa; + partid_t partid = XPC_PARTID(part); + enum xpc_retval ret; + + /* pull the cacheline that contains the variables we're interested in */ + + DBUG_ON(part->remote_vars_part_pa != + L1_CACHE_ALIGN(part->remote_vars_part_pa)); + DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2); + + remote_entry_pa = part->remote_vars_part_pa + + sn_partition_id * sizeof(struct xpc_vars_part); + + remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); + + pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline + + (remote_entry_pa & + (L1_CACHE_BYTES - 1))); + + ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline, + (void *)remote_entry_cacheline_pa, + L1_CACHE_BYTES); + if (ret != xpcSuccess) { + dev_dbg(xpc_chan, "failed to pull XPC vars_part from " + "partition %d, ret=%d\n", partid, ret); + return ret; + } + + /* see if they've been set up yet */ + + if (pulled_entry->magic != XPC_VP_MAGIC1 && + pulled_entry->magic != XPC_VP_MAGIC2) { + + if (pulled_entry->magic != 0) { + dev_dbg(xpc_chan, "partition %d's XPC vars_part for " + "partition %d has bad magic value (=0x%lx)\n", + partid, sn_partition_id, pulled_entry->magic); + return xpcBadMagic; + } + + /* they've not been initialized yet */ + return xpcRetry; + } + + if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) { + + /* validate the variables */ + + if (pulled_entry->GPs_pa == 0 || + pulled_entry->openclose_args_pa == 0 || + pulled_entry->IPI_amo_pa == 0) { + + dev_err(xpc_chan, "partition %d's XPC vars_part for " + "partition %d are not valid\n", partid, + sn_partition_id); + return xpcInvalidAddress; + } + + /* the variables we imported look to be valid */ + + part->remote_GPs_pa = pulled_entry->GPs_pa; + part->remote_openclose_args_pa = + pulled_entry->openclose_args_pa; + part->remote_IPI_amo_va = + (AMO_t *)__va(pulled_entry->IPI_amo_pa); + part->remote_IPI_nasid = pulled_entry->IPI_nasid; + part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; + + if (part->nchannels > pulled_entry->nchannels) + part->nchannels = pulled_entry->nchannels; + + /* let the other side know that we've pulled their variables */ + + xpc_vars_part[partid].magic = XPC_VP_MAGIC2; + } + + if (pulled_entry->magic == XPC_VP_MAGIC1) + return xpcRetry; + + return xpcSuccess; +} + +/* + * Get the IPI flags and pull the openclose args and/or remote GPs as needed. + */ +static u64 +xpc_get_IPI_flags(struct xpc_partition *part) +{ + unsigned long irq_flags; + u64 IPI_amo; + enum xpc_retval ret; + + /* + * See if there are any IPI flags to be handled. + */ + + spin_lock_irqsave(&part->IPI_lock, irq_flags); + IPI_amo = part->local_IPI_amo; + if (IPI_amo != 0) + part->local_IPI_amo = 0; + + spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + + if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { + ret = xpc_pull_remote_cachelines(part, + part->remote_openclose_args, + (void *)part-> + remote_openclose_args_pa, + XPC_OPENCLOSE_ARGS_SIZE); + if (ret != xpcSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull openclose args from " + "partition %d, ret=%d\n", XPC_PARTID(part), + ret); + + /* don't bother processing IPIs anymore */ + IPI_amo = 0; + } + } + + if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { + ret = xpc_pull_remote_cachelines(part, part->remote_GPs, + (void *)part->remote_GPs_pa, + XPC_GP_SIZE); + if (ret != xpcSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull GPs from partition " + "%d, ret=%d\n", XPC_PARTID(part), ret); + + /* don't bother processing IPIs anymore */ + IPI_amo = 0; + } + } + + return IPI_amo; +} + +/* + * Allocate the local message queue and the notify queue. + */ +static enum xpc_retval +xpc_allocate_local_msgqueue(struct xpc_channel *ch) +{ + unsigned long irq_flags; + int nentries; + size_t nbytes; + + for (nentries = ch->local_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->msg_size; + ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, + GFP_KERNEL, + &ch->local_msgqueue_base); + if (ch->local_msgqueue == NULL) + continue; + + nbytes = nentries * sizeof(struct xpc_notify); + ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); + if (ch->notify_queue == NULL) { + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + continue; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->local_nentries) { + dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->local_nentries, ch->partid, ch->number); + + ch->local_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpcSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for local message queue and notify " + "queue, partid=%d, channel=%d\n", ch->partid, ch->number); + return xpcNoMemory; +} + +/* + * Allocate the cached remote message queue. + */ +static enum xpc_retval +xpc_allocate_remote_msgqueue(struct xpc_channel *ch) +{ + unsigned long irq_flags; + int nentries; + size_t nbytes; + + DBUG_ON(ch->remote_nentries <= 0); + + for (nentries = ch->remote_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->msg_size; + ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, + GFP_KERNEL, + &ch->remote_msgqueue_base); + if (ch->remote_msgqueue == NULL) + continue; + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->remote_nentries) { + dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->remote_nentries, ch->partid, ch->number); + + ch->remote_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpcSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for cached remote message queue, " + "partid=%d, channel=%d\n", ch->partid, ch->number); + return xpcNoMemory; +} + +/* + * Allocate message queues and other stuff associated with a channel. + * + * Note: Assumes all of the channel sizes are filled in. + */ +static enum xpc_retval +xpc_allocate_msgqueues(struct xpc_channel *ch) +{ + unsigned long irq_flags; + enum xpc_retval ret; + + DBUG_ON(ch->flags & XPC_C_SETUP); + + ret = xpc_allocate_local_msgqueue(ch); + if (ret != xpcSuccess) + return ret; + + ret = xpc_allocate_remote_msgqueue(ch); + if (ret != xpcSuccess) { + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + kfree(ch->notify_queue); + ch->notify_queue = NULL; + return ret; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags |= XPC_C_SETUP; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + return xpcSuccess; +} + +/* + * Process a connect message from a remote partition. + * + * Note: xpc_process_connect() is expecting to be called with the + * spin_lock_irqsave held and will leave it locked upon return. + */ +static void +xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) +{ + enum xpc_retval ret; + + DBUG_ON(!spin_is_locked(&ch->lock)); + + if (!(ch->flags & XPC_C_OPENREQUEST) || + !(ch->flags & XPC_C_ROPENREQUEST)) { + /* nothing more to do for now */ + return; + } + DBUG_ON(!(ch->flags & XPC_C_CONNECTING)); + + if (!(ch->flags & XPC_C_SETUP)) { + spin_unlock_irqrestore(&ch->lock, *irq_flags); + ret = xpc_allocate_msgqueues(ch); + spin_lock_irqsave(&ch->lock, *irq_flags); + + if (ret != xpcSuccess) + XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags); + + if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) + return; + + DBUG_ON(!(ch->flags & XPC_C_SETUP)); + DBUG_ON(ch->local_msgqueue == NULL); + DBUG_ON(ch->remote_msgqueue == NULL); + } + + if (!(ch->flags & XPC_C_OPENREPLY)) { + ch->flags |= XPC_C_OPENREPLY; + xpc_IPI_send_openreply(ch, irq_flags); + } + + if (!(ch->flags & XPC_C_ROPENREPLY)) + return; + + DBUG_ON(ch->remote_msgqueue_pa == 0); + + ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */ + + dev_info(xpc_chan, "channel %d to partition %d connected\n", + ch->number, ch->partid); + + spin_unlock_irqrestore(&ch->lock, *irq_flags); + xpc_create_kthreads(ch, 1, 0); + spin_lock_irqsave(&ch->lock, *irq_flags); +} + +/* + * Notify those who wanted to be notified upon delivery of their message. + */ +static void +xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put) +{ + struct xpc_notify *notify; + u8 notify_type; + s64 get = ch->w_remote_GP.get - 1; + + while (++get < put && atomic_read(&ch->n_to_notify) > 0) { + + notify = &ch->notify_queue[get % ch->local_nentries]; + + /* + * See if the notify entry indicates it was associated with + * a message who's sender wants to be notified. It is possible + * that it is, but someone else is doing or has done the + * notification. + */ + notify_type = notify->type; + if (notify_type == 0 || + cmpxchg(¬ify->type, notify_type, 0) != notify_type) { + continue; + } + + DBUG_ON(notify_type != XPC_N_CALL); + + atomic_dec(&ch->n_to_notify); + + if (notify->func != NULL) { + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *)notify, get, ch->partid, ch->number); + + notify->func(reason, ch->partid, ch->number, + notify->key); + + dev_dbg(xpc_chan, "notify->func() returned, " + "notify=0x%p, msg_number=%ld, partid=%d, " + "channel=%d\n", (void *)notify, get, + ch->partid, ch->number); + } + } +} + +/* + * Free up message queues and other stuff that were allocated for the specified + * channel. + * + * Note: ch->reason and ch->reason_line are left set for debugging purposes, + * they're cleared when XPC_C_DISCONNECTED is cleared. + */ +static void +xpc_free_msgqueues(struct xpc_channel *ch) +{ + DBUG_ON(!spin_is_locked(&ch->lock)); + DBUG_ON(atomic_read(&ch->n_to_notify) != 0); + + ch->remote_msgqueue_pa = 0; + ch->func = NULL; + ch->key = NULL; + ch->msg_size = 0; + ch->local_nentries = 0; + ch->remote_nentries = 0; + ch->kthreads_assigned_limit = 0; + ch->kthreads_idle_limit = 0; + + ch->local_GP->get = 0; + ch->local_GP->put = 0; + ch->remote_GP.get = 0; + ch->remote_GP.put = 0; + ch->w_local_GP.get = 0; + ch->w_local_GP.put = 0; + ch->w_remote_GP.get = 0; + ch->w_remote_GP.put = 0; + ch->next_msg_to_pull = 0; + + if (ch->flags & XPC_C_SETUP) { + ch->flags &= ~XPC_C_SETUP; + + dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", + ch->flags, ch->partid, ch->number); + + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + kfree(ch->remote_msgqueue_base); + ch->remote_msgqueue = NULL; + kfree(ch->notify_queue); + ch->notify_queue = NULL; + } +} + +/* + * spin_lock_irqsave() is expected to be held on entry. + */ +static void +xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + u32 channel_was_connected = (ch->flags & XPC_C_WASCONNECTED); + + DBUG_ON(!spin_is_locked(&ch->lock)); + + if (!(ch->flags & XPC_C_DISCONNECTING)) + return; + + DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); + + /* make sure all activity has settled down first */ + + if (atomic_read(&ch->kthreads_assigned) > 0 || + atomic_read(&ch->references) > 0) { + return; + } + DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && + !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE)); + + if (part->act_state == XPC_P_DEACTIVATING) { + /* can't proceed until the other side disengages from us */ + if (xpc_partition_engaged(1UL << ch->partid)) + return; + + } else { + + /* as long as the other side is up do the full protocol */ + + if (!(ch->flags & XPC_C_RCLOSEREQUEST)) + return; + + if (!(ch->flags & XPC_C_CLOSEREPLY)) { + ch->flags |= XPC_C_CLOSEREPLY; + xpc_IPI_send_closereply(ch, irq_flags); + } + + if (!(ch->flags & XPC_C_RCLOSEREPLY)) + return; + } + + /* wake those waiting for notify completion */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* >>> we do callout while holding ch->lock */ + xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put); + } + + /* both sides are disconnected now */ + + if (ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE) { + spin_unlock_irqrestore(&ch->lock, *irq_flags); + xpc_disconnect_callout(ch, xpcDisconnected); + spin_lock_irqsave(&ch->lock, *irq_flags); + } + + /* it's now safe to free the channel's message queues */ + xpc_free_msgqueues(ch); + + /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */ + ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); + + atomic_dec(&part->nchannels_active); + + if (channel_was_connected) { + dev_info(xpc_chan, "channel %d to partition %d disconnected, " + "reason=%d\n", ch->number, ch->partid, ch->reason); + } + + if (ch->flags & XPC_C_WDISCONNECT) { + /* we won't lose the CPU since we're holding ch->lock */ + complete(&ch->wdisconnect_wait); + } else if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + /* time to take action on any delayed IPI flags */ + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number, + ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + } + ch->delayed_IPI_flags = 0; + } +} + +/* + * Process a change in the channel's remote connection state. + */ +static void +xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, + u8 IPI_flags) +{ + unsigned long irq_flags; + struct xpc_openclose_args *args = + &part->remote_openclose_args[ch_number]; + struct xpc_channel *ch = &part->channels[ch_number]; + enum xpc_retval reason; + + spin_lock_irqsave(&ch->lock, irq_flags); + +again: + + if ((ch->flags & XPC_C_DISCONNECTED) && + (ch->flags & XPC_C_WDISCONNECT)) { + /* + * Delay processing IPI flags until thread waiting disconnect + * has had a chance to see that the channel is disconnected. + */ + ch->delayed_IPI_flags |= IPI_flags; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + if (IPI_flags & XPC_IPI_CLOSEREQUEST) { + + dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received " + "from partid=%d, channel=%d\n", args->reason, + ch->partid, ch->number); + + /* + * If RCLOSEREQUEST is set, we're probably waiting for + * RCLOSEREPLY. We should find it and a ROPENREQUEST packed + * with this RCLOSEREQUEST in the IPI_flags. + */ + + if (ch->flags & XPC_C_RCLOSEREQUEST) { + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING)); + DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); + DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY)); + DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY); + + DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY)); + IPI_flags &= ~XPC_IPI_CLOSEREPLY; + ch->flags |= XPC_C_RCLOSEREPLY; + + /* both sides have finished disconnecting */ + xpc_process_disconnect(ch, &irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + goto again; + } + + if (ch->flags & XPC_C_DISCONNECTED) { + if (!(IPI_flags & XPC_IPI_OPENREQUEST)) { + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, + ch_number) & + XPC_IPI_OPENREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, + XPC_IPI_CLOSEREQUEST); + spin_unlock(&part->IPI_lock); + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + XPC_SET_REASON(ch, 0, 0); + ch->flags &= ~XPC_C_DISCONNECTED; + + atomic_inc(&part->nchannels_active); + ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST); + } + + IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY); + + /* + * The meaningful CLOSEREQUEST connection state fields are: + * reason = reason connection is to be closed + */ + + ch->flags |= XPC_C_RCLOSEREQUEST; + + if (!(ch->flags & XPC_C_DISCONNECTING)) { + reason = args->reason; + if (reason <= xpcSuccess || reason > xpcUnknownReason) + reason = xpcUnknownReason; + else if (reason == xpcUnregistering) + reason = xpcOtherUnregistering; + + XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); + + DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + xpc_process_disconnect(ch, &irq_flags); + } + + if (IPI_flags & XPC_IPI_CLOSEREPLY) { + + dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d," + " channel=%d\n", ch->partid, ch->number); + + if (ch->flags & XPC_C_DISCONNECTED) { + DBUG_ON(part->act_state != XPC_P_DEACTIVATING); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); + + if (!(ch->flags & XPC_C_RCLOSEREQUEST)) { + if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number) + & XPC_IPI_CLOSEREQUEST)) { + + DBUG_ON(ch->delayed_IPI_flags != 0); + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch_number, + XPC_IPI_CLOSEREPLY); + spin_unlock(&part->IPI_lock); + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + ch->flags |= XPC_C_RCLOSEREPLY; + + if (ch->flags & XPC_C_CLOSEREPLY) { + /* both sides have finished disconnecting */ + xpc_process_disconnect(ch, &irq_flags); + } + } + + if (IPI_flags & XPC_IPI_OPENREQUEST) { + + dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, " + "local_nentries=%d) received from partid=%d, " + "channel=%d\n", args->msg_size, args->local_nentries, + ch->partid, ch->number); + + if (part->act_state == XPC_P_DEACTIVATING || + (ch->flags & XPC_C_ROPENREQUEST)) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { + ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED | + XPC_C_OPENREQUEST))); + DBUG_ON(ch->flags & (XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | + XPC_C_OPENREPLY | XPC_C_CONNECTED)); + + /* + * The meaningful OPENREQUEST connection state fields are: + * msg_size = size of channel's messages in bytes + * local_nentries = remote partition's local_nentries + */ + if (args->msg_size == 0 || args->local_nentries == 0) { + /* assume OPENREQUEST was delayed by mistake */ + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING); + ch->remote_nentries = args->local_nentries; + + if (ch->flags & XPC_C_OPENREQUEST) { + if (args->msg_size != ch->msg_size) { + XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + } else { + ch->msg_size = args->msg_size; + + XPC_SET_REASON(ch, 0, 0); + ch->flags &= ~XPC_C_DISCONNECTED; + + atomic_inc(&part->nchannels_active); + } + + xpc_process_connect(ch, &irq_flags); + } + + if (IPI_flags & XPC_IPI_OPENREPLY) { + + dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, " + "local_nentries=%d, remote_nentries=%d) received from " + "partid=%d, channel=%d\n", args->local_msgqueue_pa, + args->local_nentries, args->remote_nentries, + ch->partid, ch->number); + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + if (!(ch->flags & XPC_C_OPENREQUEST)) { + XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return; + } + + DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST)); + DBUG_ON(ch->flags & XPC_C_CONNECTED); + + /* + * The meaningful OPENREPLY connection state fields are: + * local_msgqueue_pa = physical address of remote + * partition's local_msgqueue + * local_nentries = remote partition's local_nentries + * remote_nentries = remote partition's remote_nentries + */ + DBUG_ON(args->local_msgqueue_pa == 0); + DBUG_ON(args->local_nentries == 0); + DBUG_ON(args->remote_nentries == 0); + + ch->flags |= XPC_C_ROPENREPLY; + ch->remote_msgqueue_pa = args->local_msgqueue_pa; + + if (args->local_nentries < ch->remote_nentries) { + dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + "remote_nentries=%d, old remote_nentries=%d, " + "partid=%d, channel=%d\n", + args->local_nentries, ch->remote_nentries, + ch->partid, ch->number); + + ch->remote_nentries = args->local_nentries; + } + if (args->remote_nentries < ch->local_nentries) { + dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + "local_nentries=%d, old local_nentries=%d, " + "partid=%d, channel=%d\n", + args->remote_nentries, ch->local_nentries, + ch->partid, ch->number); + + ch->local_nentries = args->remote_nentries; + } + + xpc_process_connect(ch, &irq_flags); + } + + spin_unlock_irqrestore(&ch->lock, irq_flags); +} + +/* + * Attempt to establish a channel connection to a remote partition. + */ +static enum xpc_retval +xpc_connect_channel(struct xpc_channel *ch) +{ + unsigned long irq_flags; + struct xpc_registration *registration = &xpc_registrations[ch->number]; + + if (mutex_trylock(®istration->mutex) == 0) + return xpcRetry; + + if (!XPC_CHANNEL_REGISTERED(ch->number)) { + mutex_unlock(®istration->mutex); + return xpcUnregistered; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + + DBUG_ON(ch->flags & XPC_C_CONNECTED); + DBUG_ON(ch->flags & XPC_C_OPENREQUEST); + + if (ch->flags & XPC_C_DISCONNECTING) { + spin_unlock_irqrestore(&ch->lock, irq_flags); + mutex_unlock(®istration->mutex); + return ch->reason; + } + + /* add info from the channel connect registration to the channel */ + + ch->kthreads_assigned_limit = registration->assigned_limit; + ch->kthreads_idle_limit = registration->idle_limit; + DBUG_ON(atomic_read(&ch->kthreads_assigned) != 0); + DBUG_ON(atomic_read(&ch->kthreads_idle) != 0); + DBUG_ON(atomic_read(&ch->kthreads_active) != 0); + + ch->func = registration->func; + DBUG_ON(registration->func == NULL); + ch->key = registration->key; + + ch->local_nentries = registration->nentries; + + if (ch->flags & XPC_C_ROPENREQUEST) { + if (registration->msg_size != ch->msg_size) { + /* the local and remote sides aren't the same */ + + /* + * Because XPC_DISCONNECT_CHANNEL() can block we're + * forced to up the registration sema before we unlock + * the channel lock. But that's okay here because we're + * done with the part that required the registration + * sema. XPC_DISCONNECT_CHANNEL() requires that the + * channel lock be locked and will unlock and relock + * the channel lock as needed. + */ + mutex_unlock(®istration->mutex); + XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpcUnequalMsgSizes; + } + } else { + ch->msg_size = registration->msg_size; + + XPC_SET_REASON(ch, 0, 0); + ch->flags &= ~XPC_C_DISCONNECTED; + + atomic_inc(&xpc_partitions[ch->partid].nchannels_active); + } + + mutex_unlock(®istration->mutex); + + /* initiate the connection */ + + ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING); + xpc_IPI_send_openrequest(ch, &irq_flags); + + xpc_process_connect(ch, &irq_flags); + + spin_unlock_irqrestore(&ch->lock, irq_flags); + + return xpcSuccess; +} + +/* + * Clear some of the msg flags in the local message queue. + */ +static inline void +xpc_clear_local_msgqueue_flags(struct xpc_channel *ch) +{ + struct xpc_msg *msg; + s64 get; + + get = ch->w_remote_GP.get; + do { + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (get % ch->local_nentries) * + ch->msg_size); + msg->flags = 0; + } while (++get < ch->remote_GP.get); +} + +/* + * Clear some of the msg flags in the remote message queue. + */ +static inline void +xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch) +{ + struct xpc_msg *msg; + s64 put; + + put = ch->w_remote_GP.put; + do { + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + (put % ch->remote_nentries) * + ch->msg_size); + msg->flags = 0; + } while (++put < ch->remote_GP.put); +} + +static void +xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) +{ + struct xpc_channel *ch = &part->channels[ch_number]; + int nmsgs_sent; + + ch->remote_GP = part->remote_GPs[ch_number]; + + /* See what, if anything, has changed for each connected channel */ + + xpc_msgqueue_ref(ch); + + if (ch->w_remote_GP.get == ch->remote_GP.get && + ch->w_remote_GP.put == ch->remote_GP.put) { + /* nothing changed since GPs were last pulled */ + xpc_msgqueue_deref(ch); + return; + } + + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return; + } + + /* + * First check to see if messages recently sent by us have been + * received by the other side. (The remote GET value will have + * changed since we last looked at it.) + */ + + if (ch->w_remote_GP.get != ch->remote_GP.get) { + + /* + * We need to notify any senders that want to be notified + * that their sent messages have been received by their + * intended recipients. We need to do this before updating + * w_remote_GP.get so that we don't allocate the same message + * queue entries prematurely (see xpc_allocate_msg()). + */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* + * Notify senders that messages sent have been + * received and delivered by the other side. + */ + xpc_notify_senders(ch, xpcMsgDelivered, + ch->remote_GP.get); + } + + /* + * Clear msg->flags in previously sent messages, so that + * they're ready for xpc_allocate_msg(). + */ + xpc_clear_local_msgqueue_flags(ch); + + ch->w_remote_GP.get = ch->remote_GP.get; + + dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " + "channel=%d\n", ch->w_remote_GP.get, ch->partid, + ch->number); + + /* + * If anyone was waiting for message queue entries to become + * available, wake them up. + */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); + } + + /* + * Now check for newly sent messages by the other side. (The remote + * PUT value will have changed since we last looked at it.) + */ + + if (ch->w_remote_GP.put != ch->remote_GP.put) { + /* + * Clear msg->flags in previously received messages, so that + * they're ready for xpc_get_deliverable_msg(). + */ + xpc_clear_remote_msgqueue_flags(ch); + + ch->w_remote_GP.put = ch->remote_GP.put; + + dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " + "channel=%d\n", ch->w_remote_GP.put, ch->partid, + ch->number); + + nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get; + if (nmsgs_sent > 0) { + dev_dbg(xpc_chan, "msgs waiting to be copied and " + "delivered=%d, partid=%d, channel=%d\n", + nmsgs_sent, ch->partid, ch->number); + + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) + xpc_activate_kthreads(ch, nmsgs_sent); + } + } + + xpc_msgqueue_deref(ch); +} + +void +xpc_process_channel_activity(struct xpc_partition *part) +{ + unsigned long irq_flags; + u64 IPI_amo, IPI_flags; + struct xpc_channel *ch; + int ch_number; + u32 ch_flags; + + IPI_amo = xpc_get_IPI_flags(part); + + /* + * Initiate channel connections for registered channels. + * + * For each connected channel that has pending messages activate idle + * kthreads and/or create new kthreads as needed. + */ + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + /* + * Process any open or close related IPI flags, and then deal + * with connecting or disconnecting the channel as required. + */ + + IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number); + + if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags)) + xpc_process_openclose_IPI(part, ch_number, IPI_flags); + + ch_flags = ch->flags; /* need an atomic snapshot of flags */ + + if (ch_flags & XPC_C_DISCONNECTING) { + spin_lock_irqsave(&ch->lock, irq_flags); + xpc_process_disconnect(ch, &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + continue; + } + + if (part->act_state == XPC_P_DEACTIVATING) + continue; + + if (!(ch_flags & XPC_C_CONNECTED)) { + if (!(ch_flags & XPC_C_OPENREQUEST)) { + DBUG_ON(ch_flags & XPC_C_SETUP); + (void)xpc_connect_channel(ch); + } else { + spin_lock_irqsave(&ch->lock, irq_flags); + xpc_process_connect(ch, &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + } + continue; + } + + /* + * Process any message related IPI flags, this may involve the + * activation of kthreads to deliver any pending messages sent + * from the other partition. + */ + + if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags)) + xpc_process_msg_IPI(part, ch_number); + } +} + +/* + * XPC's heartbeat code calls this function to inform XPC that a partition is + * going down. XPC responds by tearing down the XPartition Communication + * infrastructure used for the just downed partition. + * + * XPC's heartbeat code will never call this function and xpc_partition_up() + * at the same time. Nor will it ever make multiple calls to either function + * at the same time. + */ +void +xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason) +{ + unsigned long irq_flags; + int ch_number; + struct xpc_channel *ch; + + dev_dbg(xpc_chan, "deactivating partition %d, reason=%d\n", + XPC_PARTID(part), reason); + + if (!xpc_part_ref(part)) { + /* infrastructure for this partition isn't currently set up */ + return; + } + + /* disconnect channels associated with the partition going down */ + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + xpc_msgqueue_ref(ch); + spin_lock_irqsave(&ch->lock, irq_flags); + + XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); + + spin_unlock_irqrestore(&ch->lock, irq_flags); + xpc_msgqueue_deref(ch); + } + + xpc_wakeup_channel_mgr(part); + + xpc_part_deref(part); +} + +/* + * Teardown the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +void +xpc_teardown_infrastructure(struct xpc_partition *part) +{ + partid_t partid = XPC_PARTID(part); + + /* + * We start off by making this partition inaccessible to local + * processes by marking it as no longer setup. Then we make it + * inaccessible to remote processes by clearing the XPC per partition + * specific variable's magic # (which indicates that these variables + * are no longer valid) and by ignoring all XPC notify IPIs sent to + * this partition. + */ + + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); + DBUG_ON(atomic_read(&part->nchannels_active) != 0); + DBUG_ON(part->setup_state != XPC_P_SETUP); + part->setup_state = XPC_P_WTEARDOWN; + + xpc_vars_part[partid].magic = 0; + + free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); + + /* + * Before proceeding with the teardown we have to wait until all + * existing references cease. + */ + wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); + + /* now we can begin tearing down the infrastructure */ + + part->setup_state = XPC_P_TORNDOWN; + + /* in case we've still got outstanding timers registered... */ + del_timer_sync(&part->dropped_IPI_timer); + + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + part->local_IPI_amo_va = NULL; +} + +/* + * Called by XP at the time of channel connection registration to cause + * XPC to establish connections to all currently active partitions. + */ +void +xpc_initiate_connect(int ch_number) +{ + partid_t partid; + struct xpc_partition *part; + struct xpc_channel *ch; + + DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (xpc_part_ref(part)) { + ch = &part->channels[ch_number]; + + /* + * Initiate the establishment of a connection on the + * newly registered channel to the remote partition. + */ + xpc_wakeup_channel_mgr(part); + xpc_part_deref(part); + } + } +} + +void +xpc_connected_callout(struct xpc_channel *ch) +{ + /* let the registerer know that a connection has been established */ + + if (ch->func != NULL) { + dev_dbg(xpc_chan, "ch->func() called, reason=xpcConnected, " + "partid=%d, channel=%d\n", ch->partid, ch->number); + + ch->func(xpcConnected, ch->partid, ch->number, + (void *)(u64)ch->local_nentries, ch->key); + + dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, " + "partid=%d, channel=%d\n", ch->partid, ch->number); + } +} + +/* + * Called by XP at the time of channel connection unregistration to cause + * XPC to teardown all current connections for the specified channel. + * + * Before returning xpc_initiate_disconnect() will wait until all connections + * on the specified channel have been closed/torndown. So the caller can be + * assured that they will not be receiving any more callouts from XPC to the + * function they registered via xpc_connect(). + * + * Arguments: + * + * ch_number - channel # to unregister. + */ +void +xpc_initiate_disconnect(int ch_number) +{ + unsigned long irq_flags; + partid_t partid; + struct xpc_partition *part; + struct xpc_channel *ch; + + DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + + /* initiate the channel disconnect for every active partition */ + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (xpc_part_ref(part)) { + ch = &part->channels[ch_number]; + xpc_msgqueue_ref(ch); + + spin_lock_irqsave(&ch->lock, irq_flags); + + if (!(ch->flags & XPC_C_DISCONNECTED)) { + ch->flags |= XPC_C_WDISCONNECT; + + XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering, + &irq_flags); + } + + spin_unlock_irqrestore(&ch->lock, irq_flags); + + xpc_msgqueue_deref(ch); + xpc_part_deref(part); + } + } + + xpc_disconnect_wait(ch_number); +} + +/* + * To disconnect a channel, and reflect it back to all who may be waiting. + * + * An OPEN is not allowed until XPC_C_DISCONNECTING is cleared by + * xpc_process_disconnect(), and if set, XPC_C_WDISCONNECT is cleared by + * xpc_disconnect_wait(). + * + * THE CHANNEL IS TO BE LOCKED BY THE CALLER AND WILL REMAIN LOCKED UPON RETURN. + */ +void +xpc_disconnect_channel(const int line, struct xpc_channel *ch, + enum xpc_retval reason, unsigned long *irq_flags) +{ + u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED); + + DBUG_ON(!spin_is_locked(&ch->lock)); + + if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) + return; + + DBUG_ON(!(ch->flags & (XPC_C_CONNECTING | XPC_C_CONNECTED))); + + dev_dbg(xpc_chan, "reason=%d, line=%d, partid=%d, channel=%d\n", + reason, line, ch->partid, ch->number); + + XPC_SET_REASON(ch, reason, line); + + ch->flags |= (XPC_C_CLOSEREQUEST | XPC_C_DISCONNECTING); + /* some of these may not have been set */ + ch->flags &= ~(XPC_C_OPENREQUEST | XPC_C_OPENREPLY | + XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | + XPC_C_CONNECTING | XPC_C_CONNECTED); + + xpc_IPI_send_closerequest(ch, irq_flags); + + if (channel_was_connected) + ch->flags |= XPC_C_WASCONNECTED; + + spin_unlock_irqrestore(&ch->lock, *irq_flags); + + /* wake all idle kthreads so they can exit */ + if (atomic_read(&ch->kthreads_idle) > 0) { + wake_up_all(&ch->idle_wq); + + } else if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && + !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { + /* start a kthread that will do the xpcDisconnecting callout */ + xpc_create_kthreads(ch, 1, 1); + } + + /* wake those waiting to allocate an entry from the local msg queue */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); + + spin_lock_irqsave(&ch->lock, *irq_flags); +} + +void +xpc_disconnect_callout(struct xpc_channel *ch, enum xpc_retval reason) +{ + /* + * Let the channel's registerer know that the channel is being + * disconnected. We don't want to do this if the registerer was never + * informed of a connection being made. + */ + + if (ch->func != NULL) { + dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, " + "channel=%d\n", reason, ch->partid, ch->number); + + ch->func(reason, ch->partid, ch->number, NULL, ch->key); + + dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, " + "channel=%d\n", reason, ch->partid, ch->number); + } +} + +/* + * Wait for a message entry to become available for the specified channel, + * but don't wait any longer than 1 jiffy. + */ +static enum xpc_retval +xpc_allocate_msg_wait(struct xpc_channel *ch) +{ + enum xpc_retval ret; + + if (ch->flags & XPC_C_DISCONNECTING) { + DBUG_ON(ch->reason == xpcInterrupted); + return ch->reason; + } + + atomic_inc(&ch->n_on_msg_allocate_wq); + ret = interruptible_sleep_on_timeout(&ch->msg_allocate_wq, 1); + atomic_dec(&ch->n_on_msg_allocate_wq); + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + DBUG_ON(ch->reason == xpcInterrupted); + } else if (ret == 0) { + ret = xpcTimeout; + } else { + ret = xpcInterrupted; + } + + return ret; +} + +/* + * Allocate an entry for a message from the message queue associated with the + * specified channel. + */ +static enum xpc_retval +xpc_allocate_msg(struct xpc_channel *ch, u32 flags, + struct xpc_msg **address_of_msg) +{ + struct xpc_msg *msg; + enum xpc_retval ret; + s64 put; + + /* this reference will be dropped in xpc_send_msg() */ + xpc_msgqueue_ref(ch); + + if (ch->flags & XPC_C_DISCONNECTING) { + xpc_msgqueue_deref(ch); + return ch->reason; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return xpcNotConnected; + } + + /* + * Get the next available message entry from the local message queue. + * If none are available, we'll make sure that we grab the latest + * GP values. + */ + ret = xpcTimeout; + + while (1) { + + put = ch->w_local_GP.put; + rmb(); /* guarantee that .put loads before .get */ + if (put - ch->w_remote_GP.get < ch->local_nentries) { + + /* There are available message entries. We need to try + * to secure one for ourselves. We'll do this by trying + * to increment w_local_GP.put as long as someone else + * doesn't beat us to it. If they do, we'll have to + * try again. + */ + if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) { + /* we got the entry referenced by put */ + break; + } + continue; /* try again */ + } + + /* + * There aren't any available msg entries at this time. + * + * In waiting for a message entry to become available, + * we set a timeout in case the other side is not + * sending completion IPIs. This lets us fake an IPI + * that will cause the IPI handler to fetch the latest + * GP values as if an IPI was sent by the other side. + */ + if (ret == xpcTimeout) + xpc_IPI_send_local_msgrequest(ch); + + if (flags & XPC_NOWAIT) { + xpc_msgqueue_deref(ch); + return xpcNoWait; + } + + ret = xpc_allocate_msg_wait(ch); + if (ret != xpcInterrupted && ret != xpcTimeout) { + xpc_msgqueue_deref(ch); + return ret; + } + } + + /* get the message's address and initialize it */ + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (put % ch->local_nentries) * ch->msg_size); + + DBUG_ON(msg->flags != 0); + msg->number = put; + + dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", put + 1, + (void *)msg, msg->number, ch->partid, ch->number); + + *address_of_msg = msg; + + return xpcSuccess; +} + +/* + * Allocate an entry for a message from the message queue associated with the + * specified channel. NOTE that this routine can sleep waiting for a message + * entry to become available. To not sleep, pass in the XPC_NOWAIT flag. + * + * Arguments: + * + * partid - ID of partition to which the channel is connected. + * ch_number - channel #. + * flags - see xpc.h for valid flags. + * payload - address of the allocated payload area pointer (filled in on + * return) in which the user-defined message is constructed. + */ +enum xpc_retval +xpc_initiate_allocate(partid_t partid, int ch_number, u32 flags, void **payload) +{ + struct xpc_partition *part = &xpc_partitions[partid]; + enum xpc_retval ret = xpcUnknownReason; + struct xpc_msg *msg = NULL; + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); + + *payload = NULL; + + if (xpc_part_ref(part)) { + ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg); + xpc_part_deref(part); + + if (msg != NULL) + *payload = &msg->payload; + } + + return ret; +} + +/* + * Now we actually send the messages that are ready to be sent by advancing + * the local message queue's Put value and then send an IPI to the recipient + * partition. + */ +static void +xpc_send_msgs(struct xpc_channel *ch, s64 initial_put) +{ + struct xpc_msg *msg; + s64 put = initial_put + 1; + int send_IPI = 0; + + while (1) { + + while (1) { + if (put == ch->w_local_GP.put) + break; + + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (put % ch->local_nentries) * + ch->msg_size); + + if (!(msg->flags & XPC_M_READY)) + break; + + put++; + } + + if (put == initial_put) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) != + initial_put) { + /* someone else beat us to it */ + DBUG_ON(ch->local_GP->put < initial_put); + break; + } + + /* we just set the new value of local_GP->put */ + + dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " + "channel=%d\n", put, ch->partid, ch->number); + + send_IPI = 1; + + /* + * We need to ensure that the message referenced by + * local_GP->put is not XPC_M_READY or that local_GP->put + * equals w_local_GP.put, so we'll go have a look. + */ + initial_put = put; + } + + if (send_IPI) + xpc_IPI_send_msgrequest(ch); +} + +/* + * Common code that does the actual sending of the message by advancing the + * local message queue's Put value and sends an IPI to the partition the + * message is being sent to. + */ +static enum xpc_retval +xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, + xpc_notify_func func, void *key) +{ + enum xpc_retval ret = xpcSuccess; + struct xpc_notify *notify = notify; + s64 put, msg_number = msg->number; + + DBUG_ON(notify_type == XPC_N_CALL && func == NULL); + DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) != + msg_number % ch->local_nentries); + DBUG_ON(msg->flags & XPC_M_READY); + + if (ch->flags & XPC_C_DISCONNECTING) { + /* drop the reference grabbed in xpc_allocate_msg() */ + xpc_msgqueue_deref(ch); + return ch->reason; + } + + if (notify_type != 0) { + /* + * Tell the remote side to send an ACK interrupt when the + * message has been delivered. + */ + msg->flags |= XPC_M_INTERRUPT; + + atomic_inc(&ch->n_to_notify); + + notify = &ch->notify_queue[msg_number % ch->local_nentries]; + notify->func = func; + notify->key = key; + notify->type = notify_type; + + /* >>> is a mb() needed here? */ + + if (ch->flags & XPC_C_DISCONNECTING) { + /* + * An error occurred between our last error check and + * this one. We will try to clear the type field from + * the notify entry. If we succeed then + * xpc_disconnect_channel() didn't already process + * the notify entry. + */ + if (cmpxchg(¬ify->type, notify_type, 0) == + notify_type) { + atomic_dec(&ch->n_to_notify); + ret = ch->reason; + } + + /* drop the reference grabbed in xpc_allocate_msg() */ + xpc_msgqueue_deref(ch); + return ret; + } + } + + msg->flags |= XPC_M_READY; + + /* + * The preceding store of msg->flags must occur before the following + * load of ch->local_GP->put. + */ + mb(); + + /* see if the message is next in line to be sent, if so send it */ + + put = ch->local_GP->put; + if (put == msg_number) + xpc_send_msgs(ch, put); + + /* drop the reference grabbed in xpc_allocate_msg() */ + xpc_msgqueue_deref(ch); + return ret; +} + +/* + * Send a message previously allocated using xpc_initiate_allocate() on the + * specified channel connected to the specified partition. + * + * This routine will not wait for the message to be received, nor will + * notification be given when it does happen. Once this routine has returned + * the message entry allocated via xpc_initiate_allocate() is no longer + * accessable to the caller. + * + * This routine, although called by users, does not call xpc_part_ref() to + * ensure that the partition infrastructure is in place. It relies on the + * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). + * + * Arguments: + * + * partid - ID of partition to which the channel is connected. + * ch_number - channel # to send message on. + * payload - pointer to the payload area allocated via + * xpc_initiate_allocate(). + */ +enum xpc_retval +xpc_initiate_send(partid_t partid, int ch_number, void *payload) +{ + struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); + enum xpc_retval ret; + + dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + partid, ch_number); + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); + DBUG_ON(msg == NULL); + + ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL); + + return ret; +} + +/* + * Send a message previously allocated using xpc_initiate_allocate on the + * specified channel connected to the specified partition. + * + * This routine will not wait for the message to be sent. Once this routine + * has returned the message entry allocated via xpc_initiate_allocate() is no + * longer accessable to the caller. + * + * Once the remote end of the channel has received the message, the function + * passed as an argument to xpc_initiate_send_notify() will be called. This + * allows the sender to free up or re-use any buffers referenced by the + * message, but does NOT mean the message has been processed at the remote + * end by a receiver. + * + * If this routine returns an error, the caller's function will NOT be called. + * + * This routine, although called by users, does not call xpc_part_ref() to + * ensure that the partition infrastructure is in place. It relies on the + * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). + * + * Arguments: + * + * partid - ID of partition to which the channel is connected. + * ch_number - channel # to send message on. + * payload - pointer to the payload area allocated via + * xpc_initiate_allocate(). + * func - function to call with asynchronous notification of message + * receipt. THIS FUNCTION MUST BE NON-BLOCKING. + * key - user-defined key to be passed to the function when it's called. + */ +enum xpc_retval +xpc_initiate_send_notify(partid_t partid, int ch_number, void *payload, + xpc_notify_func func, void *key) +{ + struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); + enum xpc_retval ret; + + dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + partid, ch_number); + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); + DBUG_ON(msg == NULL); + DBUG_ON(func == NULL); + + ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL, + func, key); + return ret; +} + +static struct xpc_msg * +xpc_pull_remote_msg(struct xpc_channel *ch, s64 get) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_msg *remote_msg, *msg; + u32 msg_index, nmsgs; + u64 msg_offset; + enum xpc_retval ret; + + if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) { + /* we were interrupted by a signal */ + return NULL; + } + + while (get >= ch->next_msg_to_pull) { + + /* pull as many messages as are ready and able to be pulled */ + + msg_index = ch->next_msg_to_pull % ch->remote_nentries; + + DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put); + nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull; + if (msg_index + nmsgs > ch->remote_nentries) { + /* ignore the ones that wrap the msg queue for now */ + nmsgs = ch->remote_nentries - msg_index; + } + + msg_offset = msg_index * ch->msg_size; + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); + remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa + + msg_offset); + + ret = xpc_pull_remote_cachelines(part, msg, remote_msg, + nmsgs * ch->msg_size); + if (ret != xpcSuccess) { + + dev_dbg(xpc_chan, "failed to pull %d msgs starting with" + " msg %ld from partition %d, channel=%d, " + "ret=%d\n", nmsgs, ch->next_msg_to_pull, + ch->partid, ch->number, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + + mutex_unlock(&ch->msg_to_pull_mutex); + return NULL; + } + + ch->next_msg_to_pull += nmsgs; + } + + mutex_unlock(&ch->msg_to_pull_mutex); + + /* return the message we were looking for */ + msg_offset = (get % ch->remote_nentries) * ch->msg_size; + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); + + return msg; +} + +/* + * Get a message to be delivered. + */ +static struct xpc_msg * +xpc_get_deliverable_msg(struct xpc_channel *ch) +{ + struct xpc_msg *msg = NULL; + s64 get; + + do { + if (ch->flags & XPC_C_DISCONNECTING) + break; + + get = ch->w_local_GP.get; + rmb(); /* guarantee that .get loads before .put */ + if (get == ch->w_remote_GP.put) + break; + + /* There are messages waiting to be pulled and delivered. + * We need to try to secure one for ourselves. We'll do this + * by trying to increment w_local_GP.get and hope that no one + * else beats us to it. If they do, we'll we'll simply have + * to try again for the next one. + */ + + if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) { + /* we got the entry referenced by get */ + + dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " + "partid=%d, channel=%d\n", get + 1, + ch->partid, ch->number); + + /* pull the message from the remote partition */ + + msg = xpc_pull_remote_msg(ch, get); + + DBUG_ON(msg != NULL && msg->number != get); + DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE)); + DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY)); + + break; + } + + } while (1); + + return msg; +} + +/* + * Deliver a message to its intended recipient. + */ +void +xpc_deliver_msg(struct xpc_channel *ch) +{ + struct xpc_msg *msg; + + msg = xpc_get_deliverable_msg(ch); + if (msg != NULL) { + + /* + * This ref is taken to protect the payload itself from being + * freed before the user is finished with it, which the user + * indicates by calling xpc_initiate_received(). + */ + xpc_msgqueue_ref(ch); + + atomic_inc(&ch->kthreads_active); + + if (ch->func != NULL) { + dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *)msg, msg->number, ch->partid, + ch->number); + + /* deliver the message to its intended recipient */ + ch->func(xpcMsgReceived, ch->partid, ch->number, + &msg->payload, ch->key); + + dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *)msg, msg->number, ch->partid, + ch->number); + } + + atomic_dec(&ch->kthreads_active); + } +} + +/* + * Now we actually acknowledge the messages that have been delivered and ack'd + * by advancing the cached remote message queue's Get value and if requested + * send an IPI to the message sender's partition. + */ +static void +xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) +{ + struct xpc_msg *msg; + s64 get = initial_get + 1; + int send_IPI = 0; + + while (1) { + + while (1) { + if (get == ch->w_local_GP.get) + break; + + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + (get % ch->remote_nentries) * + ch->msg_size); + + if (!(msg->flags & XPC_M_DONE)) + break; + + msg_flags |= msg->flags; + get++; + } + + if (get == initial_get) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) != + initial_get) { + /* someone else beat us to it */ + DBUG_ON(ch->local_GP->get <= initial_get); + break; + } + + /* we just set the new value of local_GP->get */ + + dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " + "channel=%d\n", get, ch->partid, ch->number); + + send_IPI = (msg_flags & XPC_M_INTERRUPT); + + /* + * We need to ensure that the message referenced by + * local_GP->get is not XPC_M_DONE or that local_GP->get + * equals w_local_GP.get, so we'll go have a look. + */ + initial_get = get; + } + + if (send_IPI) + xpc_IPI_send_msgrequest(ch); +} + +/* + * Acknowledge receipt of a delivered message. + * + * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition + * that sent the message. + * + * This function, although called by users, does not call xpc_part_ref() to + * ensure that the partition infrastructure is in place. It relies on the + * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg(). + * + * Arguments: + * + * partid - ID of partition to which the channel is connected. + * ch_number - channel # message received on. + * payload - pointer to the payload area allocated via + * xpc_initiate_allocate(). + */ +void +xpc_initiate_received(partid_t partid, int ch_number, void *payload) +{ + struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_channel *ch; + struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); + s64 get, msg_number = msg->number; + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); + + ch = &part->channels[ch_number]; + + dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", + (void *)msg, msg_number, ch->partid, ch->number); + + DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) != + msg_number % ch->remote_nentries); + DBUG_ON(msg->flags & XPC_M_DONE); + + msg->flags |= XPC_M_DONE; + + /* + * The preceding store of msg->flags must occur before the following + * load of ch->local_GP->get. + */ + mb(); + + /* + * See if this message is next in line to be acknowledged as having + * been delivered. + */ + get = ch->local_GP->get; + if (get == msg_number) + xpc_acknowledge_msgs(ch, get, msg->flags); + + /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg() */ + xpc_msgqueue_deref(ch); +} diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c new file mode 100644 index 0000000..f673ba9 --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -0,0 +1,1323 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) support - standard version. + * + * XPC provides a message passing capability that crosses partition + * boundaries. This module is made up of two parts: + * + * partition This part detects the presence/absence of other + * partitions. It provides a heartbeat and monitors + * the heartbeats of other partitions. + * + * channel This part manages the channels and sends/receives + * messages across them to/from other partitions. + * + * There are a couple of additional functions residing in XP, which + * provide an interface to XPC for its users. + * + * + * Caveats: + * + * . We currently have no way to determine which nasid an IPI came + * from. Thus, xpc_IPI_send() does a remote AMO write followed by + * an IPI. The AMO indicates where data is to be pulled from, so + * after the IPI arrives, the remote partition checks the AMO word. + * The IPI can actually arrive before the AMO however, so other code + * must periodically check for this case. Also, remote AMO operations + * do not reliably time out. Thus we do a remote PIO read solely to + * know whether the remote partition is down and whether we should + * stop sending IPIs to it. This remote PIO read operation is set up + * in a special nofault region so SAL knows to ignore (and cleanup) + * any errors due to the remote AMO write, PIO read, and/or PIO + * write operations. + * + * If/when new hardware solves this IPI problem, we should abandon + * the current approach. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/cache.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <linux/completion.h> +#include <linux/kdebug.h> +#include <linux/kthread.h> +#include <linux/uaccess.h> +#include <asm/sn/intr.h> +#include <asm/sn/sn_sal.h> +#include "xpc.h" + +/* define two XPC debug device structures to be used with dev_dbg() et al */ + +struct device_driver xpc_dbg_name = { + .name = "xpc" +}; + +struct device xpc_part_dbg_subname = { + .bus_id = {0}, /* set to "part" at xpc_init() time */ + .driver = &xpc_dbg_name +}; + +struct device xpc_chan_dbg_subname = { + .bus_id = {0}, /* set to "chan" at xpc_init() time */ + .driver = &xpc_dbg_name +}; + +struct device *xpc_part = &xpc_part_dbg_subname; +struct device *xpc_chan = &xpc_chan_dbg_subname; + +static int xpc_kdebug_ignore; + +/* systune related variables for /proc/sys directories */ + +static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL; +static int xpc_hb_min_interval = 1; +static int xpc_hb_max_interval = 10; + +static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; +static int xpc_hb_check_min_interval = 10; +static int xpc_hb_check_max_interval = 120; + +int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; +static int xpc_disengage_request_min_timelimit; /* = 0 */ +static int xpc_disengage_request_max_timelimit = 120; + +static ctl_table xpc_sys_xpc_hb_dir[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_interval", + .data = &xpc_hb_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_min_interval, + .extra2 = &xpc_hb_max_interval}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "hb_check_interval", + .data = &xpc_hb_check_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_hb_check_min_interval, + .extra2 = &xpc_hb_check_max_interval}, + {} +}; +static ctl_table xpc_sys_xpc_dir[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "hb", + .mode = 0555, + .child = xpc_sys_xpc_hb_dir}, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "disengage_request_timelimit", + .data = &xpc_disengage_request_timelimit, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &xpc_disengage_request_min_timelimit, + .extra2 = &xpc_disengage_request_max_timelimit}, + {} +}; +static ctl_table xpc_sys_dir[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "xpc", + .mode = 0555, + .child = xpc_sys_xpc_dir}, + {} +}; +static struct ctl_table_header *xpc_sysctl; + +/* non-zero if any remote partition disengage request was timed out */ +int xpc_disengage_request_timedout; + +/* #of IRQs received */ +static atomic_t xpc_act_IRQ_rcvd; + +/* IRQ handler notifies this wait queue on receipt of an IRQ */ +static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); + +static unsigned long xpc_hb_check_timeout; + +/* notification that the xpc_hb_checker thread has exited */ +static DECLARE_COMPLETION(xpc_hb_checker_exited); + +/* notification that the xpc_discovery thread has exited */ +static DECLARE_COMPLETION(xpc_discovery_exited); + +static struct timer_list xpc_hb_timer; + +static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); + +static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_reboot_notifier = { + .notifier_call = xpc_system_reboot, +}; + +static int xpc_system_die(struct notifier_block *, unsigned long, void *); +static struct notifier_block xpc_die_notifier = { + .notifier_call = xpc_system_die, +}; + +/* + * Timer function to enforce the timelimit on the partition disengage request. + */ +static void +xpc_timeout_partition_disengage_request(unsigned long data) +{ + struct xpc_partition *part = (struct xpc_partition *)data; + + DBUG_ON(time_before(jiffies, part->disengage_request_timeout)); + + (void)xpc_partition_disengaged(part); + + DBUG_ON(part->disengage_request_timeout != 0); + DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); +} + +/* + * Notify the heartbeat check thread that an IRQ has been received. + */ +static irqreturn_t +xpc_act_IRQ_handler(int irq, void *dev_id) +{ + atomic_inc(&xpc_act_IRQ_rcvd); + wake_up_interruptible(&xpc_act_IRQ_wq); + return IRQ_HANDLED; +} + +/* + * Timer to produce the heartbeat. The timer structures function is + * already set when this is initially called. A tunable is used to + * specify when the next timeout should occur. + */ +static void +xpc_hb_beater(unsigned long dummy) +{ + xpc_vars->heartbeat++; + + if (time_after_eq(jiffies, xpc_hb_check_timeout)) + wake_up_interruptible(&xpc_act_IRQ_wq); + + xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); + add_timer(&xpc_hb_timer); +} + +/* + * This thread is responsible for nearly all of the partition + * activation/deactivation. + */ +static int +xpc_hb_checker(void *ignore) +{ + int last_IRQ_count = 0; + int new_IRQ_count; + int force_IRQ = 0; + + /* this thread was marked active by xpc_hb_init() */ + + set_cpus_allowed(current, cpumask_of_cpu(XPC_HB_CHECK_CPU)); + + /* set our heartbeating to other partitions into motion */ + xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); + xpc_hb_beater(0); + + while (!xpc_exiting) { + + dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " + "been received\n", + (int)(xpc_hb_check_timeout - jiffies), + atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); + + /* checking of remote heartbeats is skewed by IRQ handling */ + if (time_after_eq(jiffies, xpc_hb_check_timeout)) { + dev_dbg(xpc_part, "checking remote heartbeats\n"); + xpc_check_remote_hb(); + + /* + * We need to periodically recheck to ensure no + * IPI/AMO pairs have been missed. That check + * must always reset xpc_hb_check_timeout. + */ + force_IRQ = 1; + } + + /* check for outstanding IRQs */ + new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); + if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { + force_IRQ = 0; + + dev_dbg(xpc_part, "found an IRQ to process; will be " + "resetting xpc_hb_check_timeout\n"); + + last_IRQ_count += xpc_identify_act_IRQ_sender(); + if (last_IRQ_count < new_IRQ_count) { + /* retry once to help avoid missing AMO */ + (void)xpc_identify_act_IRQ_sender(); + } + last_IRQ_count = new_IRQ_count; + + xpc_hb_check_timeout = jiffies + + (xpc_hb_check_interval * HZ); + } + + /* wait for IRQ or timeout */ + (void)wait_event_interruptible(xpc_act_IRQ_wq, + (last_IRQ_count < + atomic_read(&xpc_act_IRQ_rcvd) + || time_after_eq(jiffies, + xpc_hb_check_timeout) || + xpc_exiting)); + } + + dev_dbg(xpc_part, "heartbeat checker is exiting\n"); + + /* mark this thread as having exited */ + complete(&xpc_hb_checker_exited); + return 0; +} + +/* + * This thread will attempt to discover other partitions to activate + * based on info provided by SAL. This new thread is short lived and + * will exit once discovery is complete. + */ +static int +xpc_initiate_discovery(void *ignore) +{ + xpc_discovery(); + + dev_dbg(xpc_part, "discovery thread is exiting\n"); + + /* mark this thread as having exited */ + complete(&xpc_discovery_exited); + return 0; +} + +/* + * Establish first contact with the remote partititon. This involves pulling + * the XPC per partition variables from the remote partition and waiting for + * the remote partition to pull ours. + */ +static enum xpc_retval +xpc_make_first_contact(struct xpc_partition *part) +{ + enum xpc_retval ret; + + while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) { + if (ret != xpcRetry) { + XPC_DEACTIVATE_PARTITION(part, ret); + return ret; + } + + dev_dbg(xpc_chan, "waiting to make first contact with " + "partition %d\n", XPC_PARTID(part)); + + /* wait a 1/4 of a second or so */ + (void)msleep_interruptible(250); + + if (part->act_state == XPC_P_DEACTIVATING) + return part->reason; + } + + return xpc_mark_partition_active(part); +} + +/* + * The first kthread assigned to a newly activated partition is the one + * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to + * that kthread until the partition is brought down, at which time that kthread + * returns back to XPC HB. (The return of that kthread will signify to XPC HB + * that XPC has dismantled all communication infrastructure for the associated + * partition.) This kthread becomes the channel manager for that partition. + * + * Each active partition has a channel manager, who, besides connecting and + * disconnecting channels, will ensure that each of the partition's connected + * channels has the required number of assigned kthreads to get the work done. + */ +static void +xpc_channel_mgr(struct xpc_partition *part) +{ + while (part->act_state != XPC_P_DEACTIVATING || + atomic_read(&part->nchannels_active) > 0 || + !xpc_partition_disengaged(part)) { + + xpc_process_channel_activity(part); + + /* + * Wait until we've been requested to activate kthreads or + * all of the channel's message queues have been torn down or + * a signal is pending. + * + * The channel_mgr_requests is set to 1 after being awakened, + * This is done to prevent the channel mgr from making one pass + * through the loop for each request, since he will + * be servicing all the requests in one pass. The reason it's + * set to 1 instead of 0 is so that other kthreads will know + * that the channel mgr is running and won't bother trying to + * wake him up. + */ + atomic_dec(&part->channel_mgr_requests); + (void)wait_event_interruptible(part->channel_mgr_wq, + (atomic_read(&part->channel_mgr_requests) > 0 || + part->local_IPI_amo != 0 || + (part->act_state == XPC_P_DEACTIVATING && + atomic_read(&part->nchannels_active) == 0 && + xpc_partition_disengaged(part)))); + atomic_set(&part->channel_mgr_requests, 1); + } +} + +/* + * When XPC HB determines that a partition has come up, it will create a new + * kthread and that kthread will call this function to attempt to set up the + * basic infrastructure used for Cross Partition Communication with the newly + * upped partition. + * + * The kthread that was created by XPC HB and which setup the XPC + * infrastructure will remain assigned to the partition until the partition + * goes down. At which time the kthread will teardown the XPC infrastructure + * and then exit. + * + * XPC HB will put the remote partition's XPC per partition specific variables + * physical address into xpc_partitions[partid].remote_vars_part_pa prior to + * calling xpc_partition_up(). + */ +static void +xpc_partition_up(struct xpc_partition *part) +{ + DBUG_ON(part->channels != NULL); + + dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); + + if (xpc_setup_infrastructure(part) != xpcSuccess) + return; + + /* + * The kthread that XPC HB called us with will become the + * channel manager for this partition. It will not return + * back to XPC HB until the partition's XPC infrastructure + * has been dismantled. + */ + + (void)xpc_part_ref(part); /* this will always succeed */ + + if (xpc_make_first_contact(part) == xpcSuccess) + xpc_channel_mgr(part); + + xpc_part_deref(part); + + xpc_teardown_infrastructure(part); +} + +static int +xpc_activating(void *__partid) +{ + partid_t partid = (u64)__partid; + struct xpc_partition *part = &xpc_partitions[partid]; + unsigned long irq_flags; + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + + spin_lock_irqsave(&part->act_lock, irq_flags); + + if (part->act_state == XPC_P_DEACTIVATING) { + part->act_state = XPC_P_INACTIVE; + spin_unlock_irqrestore(&part->act_lock, irq_flags); + part->remote_rp_pa = 0; + return 0; + } + + /* indicate the thread is activating */ + DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); + part->act_state = XPC_P_ACTIVATING; + + XPC_SET_REASON(part, 0, 0); + spin_unlock_irqrestore(&part->act_lock, irq_flags); + + dev_dbg(xpc_part, "bringing partition %d up\n", partid); + + /* + * Register the remote partition's AMOs with SAL so it can handle + * and cleanup errors within that address range should the remote + * partition go down. We don't unregister this range because it is + * difficult to tell when outstanding writes to the remote partition + * are finished and thus when it is safe to unregister. This should + * not result in wasted space in the SAL xp_addr_region table because + * we should get the same page for remote_amos_page_pa after module + * reloads and system reboots. + */ + if (sn_register_xp_addr_region(part->remote_amos_page_pa, + PAGE_SIZE, 1) < 0) { + dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " + "xp_addr region\n", partid); + + spin_lock_irqsave(&part->act_lock, irq_flags); + part->act_state = XPC_P_INACTIVE; + XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__); + spin_unlock_irqrestore(&part->act_lock, irq_flags); + part->remote_rp_pa = 0; + return 0; + } + + xpc_allow_hb(partid, xpc_vars); + xpc_IPI_send_activated(part); + + /* + * xpc_partition_up() holds this thread and marks this partition as + * XPC_P_ACTIVE by calling xpc_hb_mark_active(). + */ + (void)xpc_partition_up(part); + + xpc_disallow_hb(partid, xpc_vars); + xpc_mark_partition_inactive(part); + + if (part->reason == xpcReactivating) { + /* interrupting ourselves results in activating partition */ + xpc_IPI_send_reactivate(part); + } + + return 0; +} + +void +xpc_activate_partition(struct xpc_partition *part) +{ + partid_t partid = XPC_PARTID(part); + unsigned long irq_flags; + struct task_struct *kthread; + + spin_lock_irqsave(&part->act_lock, irq_flags); + + DBUG_ON(part->act_state != XPC_P_INACTIVE); + + part->act_state = XPC_P_ACTIVATION_REQ; + XPC_SET_REASON(part, xpcCloneKThread, __LINE__); + + spin_unlock_irqrestore(&part->act_lock, irq_flags); + + kthread = kthread_run(xpc_activating, (void *)((u64)partid), "xpc%02d", + partid); + if (IS_ERR(kthread)) { + spin_lock_irqsave(&part->act_lock, irq_flags); + part->act_state = XPC_P_INACTIVE; + XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__); + spin_unlock_irqrestore(&part->act_lock, irq_flags); + } +} + +/* + * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified + * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more + * than one partition, we use an AMO_t structure per partition to indicate + * whether a partition has sent an IPI or not. If it has, then wake up the + * associated kthread to handle it. + * + * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC + * running on other partitions. + * + * Noteworthy Arguments: + * + * irq - Interrupt ReQuest number. NOT USED. + * + * dev_id - partid of IPI's potential sender. + */ +irqreturn_t +xpc_notify_IRQ_handler(int irq, void *dev_id) +{ + partid_t partid = (partid_t) (u64)dev_id; + struct xpc_partition *part = &xpc_partitions[partid]; + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + + if (xpc_part_ref(part)) { + xpc_check_for_channel_activity(part); + + xpc_part_deref(part); + } + return IRQ_HANDLED; +} + +/* + * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor + * because the write to their associated IPI amo completed after the IRQ/IPI + * was received. + */ +void +xpc_dropped_IPI_check(struct xpc_partition *part) +{ + if (xpc_part_ref(part)) { + xpc_check_for_channel_activity(part); + + part->dropped_IPI_timer.expires = jiffies + + XPC_P_DROPPED_IPI_WAIT; + add_timer(&part->dropped_IPI_timer); + xpc_part_deref(part); + } +} + +void +xpc_activate_kthreads(struct xpc_channel *ch, int needed) +{ + int idle = atomic_read(&ch->kthreads_idle); + int assigned = atomic_read(&ch->kthreads_assigned); + int wakeup; + + DBUG_ON(needed <= 0); + + if (idle > 0) { + wakeup = (needed > idle) ? idle : needed; + needed -= wakeup; + + dev_dbg(xpc_chan, "wakeup %d idle kthreads, partid=%d, " + "channel=%d\n", wakeup, ch->partid, ch->number); + + /* only wakeup the requested number of kthreads */ + wake_up_nr(&ch->idle_wq, wakeup); + } + + if (needed <= 0) + return; + + if (needed + assigned > ch->kthreads_assigned_limit) { + needed = ch->kthreads_assigned_limit - assigned; + if (needed <= 0) + return; + } + + dev_dbg(xpc_chan, "create %d new kthreads, partid=%d, channel=%d\n", + needed, ch->partid, ch->number); + + xpc_create_kthreads(ch, needed, 0); +} + +/* + * This function is where XPC's kthreads wait for messages to deliver. + */ +static void +xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) +{ + do { + /* deliver messages to their intended recipients */ + + while (ch->w_local_GP.get < ch->w_remote_GP.put && + !(ch->flags & XPC_C_DISCONNECTING)) { + xpc_deliver_msg(ch); + } + + if (atomic_inc_return(&ch->kthreads_idle) > + ch->kthreads_idle_limit) { + /* too many idle kthreads on this channel */ + atomic_dec(&ch->kthreads_idle); + break; + } + + dev_dbg(xpc_chan, "idle kthread calling " + "wait_event_interruptible_exclusive()\n"); + + (void)wait_event_interruptible_exclusive(ch->idle_wq, + (ch->w_local_GP.get < ch->w_remote_GP.put || + (ch->flags & XPC_C_DISCONNECTING))); + + atomic_dec(&ch->kthreads_idle); + + } while (!(ch->flags & XPC_C_DISCONNECTING)); +} + +static int +xpc_kthread_start(void *args) +{ + partid_t partid = XPC_UNPACK_ARG1(args); + u16 ch_number = XPC_UNPACK_ARG2(args); + struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_channel *ch; + int n_needed; + unsigned long irq_flags; + + dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n", + partid, ch_number); + + ch = &part->channels[ch_number]; + + if (!(ch->flags & XPC_C_DISCONNECTING)) { + + /* let registerer know that connection has been established */ + + spin_lock_irqsave(&ch->lock, irq_flags); + if (!(ch->flags & XPC_C_CONNECTEDCALLOUT)) { + ch->flags |= XPC_C_CONNECTEDCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + xpc_connected_callout(ch); + + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags |= XPC_C_CONNECTEDCALLOUT_MADE; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + /* + * It is possible that while the callout was being + * made that the remote partition sent some messages. + * If that is the case, we may need to activate + * additional kthreads to help deliver them. We only + * need one less than total #of messages to deliver. + */ + n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; + if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) + xpc_activate_kthreads(ch, n_needed); + + } else { + spin_unlock_irqrestore(&ch->lock, irq_flags); + } + + xpc_kthread_waitmsgs(part, ch); + } + + /* let registerer know that connection is disconnecting */ + + spin_lock_irqsave(&ch->lock, irq_flags); + if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && + !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) { + ch->flags |= XPC_C_DISCONNECTINGCALLOUT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + xpc_disconnect_callout(ch, xpcDisconnecting); + + spin_lock_irqsave(&ch->lock, irq_flags); + ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + + if (atomic_dec_return(&ch->kthreads_assigned) == 0) { + if (atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + } + + xpc_msgqueue_deref(ch); + + dev_dbg(xpc_chan, "kthread exiting, partid=%d, channel=%d\n", + partid, ch_number); + + xpc_part_deref(part); + return 0; +} + +/* + * For each partition that XPC has established communications with, there is + * a minimum of one kernel thread assigned to perform any operation that + * may potentially sleep or block (basically the callouts to the asynchronous + * functions registered via xpc_connect()). + * + * Additional kthreads are created and destroyed by XPC as the workload + * demands. + * + * A kthread is assigned to one of the active channels that exists for a given + * partition. + */ +void +xpc_create_kthreads(struct xpc_channel *ch, int needed, + int ignore_disconnecting) +{ + unsigned long irq_flags; + u64 args = XPC_PACK_ARGS(ch->partid, ch->number); + struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct task_struct *kthread; + + while (needed-- > 0) { + + /* + * The following is done on behalf of the newly created + * kthread. That kthread is responsible for doing the + * counterpart to the following before it exits. + */ + if (ignore_disconnecting) { + if (!atomic_inc_not_zero(&ch->kthreads_assigned)) { + /* kthreads assigned had gone to zero */ + BUG_ON(!(ch->flags & + XPC_C_DISCONNECTINGCALLOUT_MADE)); + break; + } + + } else if (ch->flags & XPC_C_DISCONNECTING) { + break; + + } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) { + if (atomic_inc_return(&part->nchannels_engaged) == 1) + xpc_mark_partition_engaged(part); + } + (void)xpc_part_ref(part); + xpc_msgqueue_ref(ch); + + kthread = kthread_run(xpc_kthread_start, (void *)args, + "xpc%02dc%d", ch->partid, ch->number); + if (IS_ERR(kthread)) { + /* the fork failed */ + + /* + * NOTE: if (ignore_disconnecting && + * !(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) is true, + * then we'll deadlock if all other kthreads assigned + * to this channel are blocked in the channel's + * registerer, because the only thing that will unblock + * them is the xpcDisconnecting callout that this + * failed kthread_run() would have made. + */ + + if (atomic_dec_return(&ch->kthreads_assigned) == 0 && + atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + xpc_msgqueue_deref(ch); + xpc_part_deref(part); + + if (atomic_read(&ch->kthreads_assigned) < + ch->kthreads_idle_limit) { + /* + * Flag this as an error only if we have an + * insufficient #of kthreads for the channel + * to function. + */ + spin_lock_irqsave(&ch->lock, irq_flags); + XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources, + &irq_flags); + spin_unlock_irqrestore(&ch->lock, irq_flags); + } + break; + } + } +} + +void +xpc_disconnect_wait(int ch_number) +{ + unsigned long irq_flags; + partid_t partid; + struct xpc_partition *part; + struct xpc_channel *ch; + int wakeup_channel_mgr; + + /* now wait for all callouts to the caller's function to cease */ + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (!xpc_part_ref(part)) + continue; + + ch = &part->channels[ch_number]; + + if (!(ch->flags & XPC_C_WDISCONNECT)) { + xpc_part_deref(part); + continue; + } + + wait_for_completion(&ch->wdisconnect_wait); + + spin_lock_irqsave(&ch->lock, irq_flags); + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); + wakeup_channel_mgr = 0; + + if (ch->delayed_IPI_flags) { + if (part->act_state != XPC_P_DEACTIVATING) { + spin_lock(&part->IPI_lock); + XPC_SET_IPI_FLAGS(part->local_IPI_amo, + ch->number, + ch->delayed_IPI_flags); + spin_unlock(&part->IPI_lock); + wakeup_channel_mgr = 1; + } + ch->delayed_IPI_flags = 0; + } + + ch->flags &= ~XPC_C_WDISCONNECT; + spin_unlock_irqrestore(&ch->lock, irq_flags); + + if (wakeup_channel_mgr) + xpc_wakeup_channel_mgr(part); + + xpc_part_deref(part); + } +} + +static void +xpc_do_exit(enum xpc_retval reason) +{ + partid_t partid; + int active_part_count, printed_waiting_msg = 0; + struct xpc_partition *part; + unsigned long printmsg_time, disengage_request_timeout = 0; + + /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ + DBUG_ON(xpc_exiting == 1); + + /* + * Let the heartbeat checker thread and the discovery thread + * (if one is running) know that they should exit. Also wake up + * the heartbeat checker thread in case it's sleeping. + */ + xpc_exiting = 1; + wake_up_interruptible(&xpc_act_IRQ_wq); + + /* ignore all incoming interrupts */ + free_irq(SGI_XPC_ACTIVATE, NULL); + + /* wait for the discovery thread to exit */ + wait_for_completion(&xpc_discovery_exited); + + /* wait for the heartbeat checker thread to exit */ + wait_for_completion(&xpc_hb_checker_exited); + + /* sleep for a 1/3 of a second or so */ + (void)msleep_interruptible(300); + + /* wait for all partitions to become inactive */ + + printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); + xpc_disengage_request_timedout = 0; + + do { + active_part_count = 0; + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { + continue; + } + + active_part_count++; + + XPC_DEACTIVATE_PARTITION(part, reason); + + if (part->disengage_request_timeout > + disengage_request_timeout) { + disengage_request_timeout = + part->disengage_request_timeout; + } + } + + if (xpc_partition_engaged(-1UL)) { + if (time_after(jiffies, printmsg_time)) { + dev_info(xpc_part, "waiting for remote " + "partitions to disengage, timeout in " + "%ld seconds\n", + (disengage_request_timeout - jiffies) + / HZ); + printmsg_time = jiffies + + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); + printed_waiting_msg = 1; + } + + } else if (active_part_count > 0) { + if (printed_waiting_msg) { + dev_info(xpc_part, "waiting for local partition" + " to disengage\n"); + printed_waiting_msg = 0; + } + + } else { + if (!xpc_disengage_request_timedout) { + dev_info(xpc_part, "all partitions have " + "disengaged\n"); + } + break; + } + + /* sleep for a 1/3 of a second or so */ + (void)msleep_interruptible(300); + + } while (1); + + DBUG_ON(xpc_partition_engaged(-1UL)); + + /* indicate to others that our reserved page is uninitialized */ + xpc_rsvd_page->vars_pa = 0; + + /* now it's time to eliminate our heartbeat */ + del_timer_sync(&xpc_hb_timer); + DBUG_ON(xpc_vars->heartbeating_to_mask != 0); + + if (reason == xpcUnloading) { + /* take ourselves off of the reboot_notifier_list */ + (void)unregister_reboot_notifier(&xpc_reboot_notifier); + + /* take ourselves off of the die_notifier list */ + (void)unregister_die_notifier(&xpc_die_notifier); + } + + /* close down protections for IPI operations */ + xpc_restrict_IPI_ops(); + + /* clear the interface to XPC's functions */ + xpc_clear_interface(); + + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + + kfree(xpc_remote_copy_buffer_base); +} + +/* + * This function is called when the system is being rebooted. + */ +static int +xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) +{ + enum xpc_retval reason; + + switch (event) { + case SYS_RESTART: + reason = xpcSystemReboot; + break; + case SYS_HALT: + reason = xpcSystemHalt; + break; + case SYS_POWER_OFF: + reason = xpcSystemPoweroff; + break; + default: + reason = xpcSystemGoingDown; + } + + xpc_do_exit(reason); + return NOTIFY_DONE; +} + +/* + * Notify other partitions to disengage from all references to our memory. + */ +static void +xpc_die_disengage(void) +{ + struct xpc_partition *part; + partid_t partid; + unsigned long engaged; + long time, printmsg_time, disengage_request_timeout; + + /* keep xpc_hb_checker thread from doing anything (just in case) */ + xpc_exiting = 1; + + xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)) { + + /* just in case it was left set by an earlier XPC */ + xpc_clear_partition_engaged(1UL << partid); + continue; + } + + if (xpc_partition_engaged(1UL << partid) || + part->act_state != XPC_P_INACTIVE) { + xpc_request_partition_disengage(part); + xpc_mark_partition_disengaged(part); + xpc_IPI_send_disengage(part); + } + } + + time = rtc_time(); + printmsg_time = time + + (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); + disengage_request_timeout = time + + (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); + + /* wait for all other partitions to disengage from us */ + + while (1) { + engaged = xpc_partition_engaged(-1UL); + if (!engaged) { + dev_info(xpc_part, "all partitions have disengaged\n"); + break; + } + + time = rtc_time(); + if (time >= disengage_request_timeout) { + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + if (engaged & (1UL << partid)) { + dev_info(xpc_part, "disengage from " + "remote partition %d timed " + "out\n", partid); + } + } + break; + } + + if (time >= printmsg_time) { + dev_info(xpc_part, "waiting for remote partitions to " + "disengage, timeout in %ld seconds\n", + (disengage_request_timeout - time) / + sn_rtc_cycles_per_second); + printmsg_time = time + + (XPC_DISENGAGE_PRINTMSG_INTERVAL * + sn_rtc_cycles_per_second); + } + } +} + +/* + * This function is called when the system is being restarted or halted due + * to some sort of system failure. If this is the case we need to notify the + * other partitions to disengage from all references to our memory. + * This function can also be called when our heartbeater could be offlined + * for a time. In this case we need to notify other partitions to not worry + * about the lack of a heartbeat. + */ +static int +xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) +{ + switch (event) { + case DIE_MACHINE_RESTART: + case DIE_MACHINE_HALT: + xpc_die_disengage(); + break; + + case DIE_KDEBUG_ENTER: + /* Should lack of heartbeat be ignored by other partitions? */ + if (!xpc_kdebug_ignore) + break; + + /* fall through */ + case DIE_MCA_MONARCH_ENTER: + case DIE_INIT_MONARCH_ENTER: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 1; + break; + + case DIE_KDEBUG_LEAVE: + /* Is lack of heartbeat being ignored by other partitions? */ + if (!xpc_kdebug_ignore) + break; + + /* fall through */ + case DIE_MCA_MONARCH_LEAVE: + case DIE_INIT_MONARCH_LEAVE: + xpc_vars->heartbeat++; + xpc_vars->heartbeat_offline = 0; + break; + } + + return NOTIFY_DONE; +} + +int __init +xpc_init(void) +{ + int ret; + partid_t partid; + struct xpc_partition *part; + struct task_struct *kthread; + size_t buf_size; + + if (!ia64_platform_is("sn2")) + return -ENODEV; + + buf_size = max(XPC_RP_VARS_SIZE, + XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); + xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, + GFP_KERNEL, + &xpc_remote_copy_buffer_base); + if (xpc_remote_copy_buffer == NULL) + return -ENOMEM; + + snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); + snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); + + xpc_sysctl = register_sysctl_table(xpc_sys_dir); + + /* + * The first few fields of each entry of xpc_partitions[] need to + * be initialized now so that calls to xpc_connect() and + * xpc_disconnect() can be made prior to the activation of any remote + * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE + * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING + * PARTITION HAS BEEN ACTIVATED. + */ + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + part = &xpc_partitions[partid]; + + DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); + + part->act_IRQ_rcvd = 0; + spin_lock_init(&part->act_lock); + part->act_state = XPC_P_INACTIVE; + XPC_SET_REASON(part, 0, 0); + + init_timer(&part->disengage_request_timer); + part->disengage_request_timer.function = + xpc_timeout_partition_disengage_request; + part->disengage_request_timer.data = (unsigned long)part; + + part->setup_state = XPC_P_UNSET; + init_waitqueue_head(&part->teardown_wq); + atomic_set(&part->references, 0); + } + + /* + * Open up protections for IPI operations (and AMO operations on + * Shub 1.1 systems). + */ + xpc_allow_IPI_ops(); + + /* + * Interrupts being processed will increment this atomic variable and + * awaken the heartbeat thread which will process the interrupts. + */ + atomic_set(&xpc_act_IRQ_rcvd, 0); + + /* + * This is safe to do before the xpc_hb_checker thread has started + * because the handler releases a wait queue. If an interrupt is + * received before the thread is waiting, it will not go to sleep, + * but rather immediately process the interrupt. + */ + ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, + "xpc hb", NULL); + if (ret != 0) { + dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " + "errno=%d\n", -ret); + + xpc_restrict_IPI_ops(); + + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + + kfree(xpc_remote_copy_buffer_base); + return -EBUSY; + } + + /* + * Fill the partition reserved page with the information needed by + * other partitions to discover we are alive and establish initial + * communications. + */ + xpc_rsvd_page = xpc_rsvd_page_init(); + if (xpc_rsvd_page == NULL) { + dev_err(xpc_part, "could not setup our reserved page\n"); + + free_irq(SGI_XPC_ACTIVATE, NULL); + xpc_restrict_IPI_ops(); + + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + + kfree(xpc_remote_copy_buffer_base); + return -EBUSY; + } + + /* add ourselves to the reboot_notifier_list */ + ret = register_reboot_notifier(&xpc_reboot_notifier); + if (ret != 0) + dev_warn(xpc_part, "can't register reboot notifier\n"); + + /* add ourselves to the die_notifier list */ + ret = register_die_notifier(&xpc_die_notifier); + if (ret != 0) + dev_warn(xpc_part, "can't register die notifier\n"); + + init_timer(&xpc_hb_timer); + xpc_hb_timer.function = xpc_hb_beater; + + /* + * The real work-horse behind xpc. This processes incoming + * interrupts and monitors remote heartbeats. + */ + kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME); + if (IS_ERR(kthread)) { + dev_err(xpc_part, "failed while forking hb check thread\n"); + + /* indicate to others that our reserved page is uninitialized */ + xpc_rsvd_page->vars_pa = 0; + + /* take ourselves off of the reboot_notifier_list */ + (void)unregister_reboot_notifier(&xpc_reboot_notifier); + + /* take ourselves off of the die_notifier list */ + (void)unregister_die_notifier(&xpc_die_notifier); + + del_timer_sync(&xpc_hb_timer); + free_irq(SGI_XPC_ACTIVATE, NULL); + xpc_restrict_IPI_ops(); + + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + + kfree(xpc_remote_copy_buffer_base); + return -EBUSY; + } + + /* + * Startup a thread that will attempt to discover other partitions to + * activate based on info provided by SAL. This new thread is short + * lived and will exit once discovery is complete. + */ + kthread = kthread_run(xpc_initiate_discovery, NULL, + XPC_DISCOVERY_THREAD_NAME); + if (IS_ERR(kthread)) { + dev_err(xpc_part, "failed while forking discovery thread\n"); + + /* mark this new thread as a non-starter */ + complete(&xpc_discovery_exited); + + xpc_do_exit(xpcUnloading); + return -EBUSY; + } + + /* set the interface to point at XPC's functions */ + xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, + xpc_initiate_allocate, xpc_initiate_send, + xpc_initiate_send_notify, xpc_initiate_received, + xpc_initiate_partid_to_nasids); + + return 0; +} + +module_init(xpc_init); + +void __exit +xpc_exit(void) +{ + xpc_do_exit(xpcUnloading); +} + +module_exit(xpc_exit); + +MODULE_AUTHOR("Silicon Graphics, Inc."); +MODULE_DESCRIPTION("Cross Partition Communication (XPC) support"); +MODULE_LICENSE("GPL"); + +module_param(xpc_hb_interval, int, 0); +MODULE_PARM_DESC(xpc_hb_interval, "Number of seconds between " + "heartbeat increments."); + +module_param(xpc_hb_check_interval, int, 0); +MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " + "heartbeat checks."); + +module_param(xpc_disengage_request_timelimit, int, 0); +MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " + "for disengage request to complete."); + +module_param(xpc_kdebug_ignore, int, 0); +MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " + "other partitions when dropping into kdebug."); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c new file mode 100644 index 0000000..27e200e --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -0,0 +1,1174 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) partition support. + * + * This is the part of XPC that detects the presence/absence of + * other partitions. It provides a heartbeat and monitors the + * heartbeats of other partitions. + * + */ + +#include <linux/kernel.h> +#include <linux/sysctl.h> +#include <linux/cache.h> +#include <linux/mmzone.h> +#include <linux/nodemask.h> +#include <asm/uncached.h> +#include <asm/sn/bte.h> +#include <asm/sn/intr.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/nodepda.h> +#include <asm/sn/addrs.h> +#include "xpc.h" + +/* XPC is exiting flag */ +int xpc_exiting; + +/* SH_IPI_ACCESS shub register value on startup */ +static u64 xpc_sh1_IPI_access; +static u64 xpc_sh2_IPI_access0; +static u64 xpc_sh2_IPI_access1; +static u64 xpc_sh2_IPI_access2; +static u64 xpc_sh2_IPI_access3; + +/* original protection values for each node */ +u64 xpc_prot_vec[MAX_NUMNODES]; + +/* this partition's reserved page pointers */ +struct xpc_rsvd_page *xpc_rsvd_page; +static u64 *xpc_part_nasids; +static u64 *xpc_mach_nasids; +struct xpc_vars *xpc_vars; +struct xpc_vars_part *xpc_vars_part; + +static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ +static int xp_nasid_mask_words; /* actual size in words of nasid mask */ + +/* + * For performance reasons, each entry of xpc_partitions[] is cacheline + * aligned. And xpc_partitions[] is padded with an additional entry at the + * end so that the last legitimate entry doesn't share its cacheline with + * another variable. + */ +struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; + +/* + * Generic buffer used to store a local copy of portions of a remote + * partition's reserved page (either its header and part_nasids mask, + * or its vars). + */ +char *xpc_remote_copy_buffer; +void *xpc_remote_copy_buffer_base; + +/* + * Guarantee that the kmalloc'd memory is cacheline aligned. + */ +void * +xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kmalloc will give us cachline aligned memory by default */ + *base = kmalloc(size, flags); + if (*base == NULL) + return NULL; + + if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) + return *base; + + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kmalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) + return NULL; + + return (void *)L1_CACHE_ALIGN((u64)*base); +} + +/* + * Given a nasid, get the physical address of the partition's reserved page + * for that nasid. This function returns 0 on any error. + */ +static u64 +xpc_get_rsvd_page_pa(int nasid) +{ + bte_result_t bte_res; + s64 status; + u64 cookie = 0; + u64 rp_pa = nasid; /* seed with nasid */ + u64 len = 0; + u64 buf = buf; + u64 buf_len = 0; + void *buf_base = NULL; + + while (1) { + + status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa, + &len); + + dev_dbg(xpc_part, "SAL returned with status=%li, cookie=" + "0x%016lx, address=0x%016lx, len=0x%016lx\n", + status, cookie, rp_pa, len); + + if (status != SALRET_MORE_PASSES) + break; + + if (L1_CACHE_ALIGN(len) > buf_len) { + kfree(buf_base); + buf_len = L1_CACHE_ALIGN(len); + buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len, + GFP_KERNEL, + &buf_base); + if (buf_base == NULL) { + dev_err(xpc_part, "unable to kmalloc " + "len=0x%016lx\n", buf_len); + status = SALRET_ERROR; + break; + } + } + + bte_res = xp_bte_copy(rp_pa, buf, buf_len, + (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (bte_res != BTE_SUCCESS) { + dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res); + status = SALRET_ERROR; + break; + } + } + + kfree(buf_base); + + if (status != SALRET_OK) + rp_pa = 0; + + dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa); + return rp_pa; +} + +/* + * Fill the partition reserved page with the information needed by + * other partitions to discover we are alive and establish initial + * communications. + */ +struct xpc_rsvd_page * +xpc_rsvd_page_init(void) +{ + struct xpc_rsvd_page *rp; + AMO_t *amos_page; + u64 rp_pa, nasid_array = 0; + int i, ret; + + /* get the local reserved page's address */ + + preempt_disable(); + rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id())); + preempt_enable(); + if (rp_pa == 0) { + dev_err(xpc_part, "SAL failed to locate the reserved page\n"); + return NULL; + } + rp = (struct xpc_rsvd_page *)__va(rp_pa); + + if (rp->partid != sn_partition_id) { + dev_err(xpc_part, "the reserved page's partid of %d should be " + "%d\n", rp->partid, sn_partition_id); + return NULL; + } + + rp->version = XPC_RP_VERSION; + + /* establish the actual sizes of the nasid masks */ + if (rp->SAL_version == 1) { + /* SAL_version 1 didn't set the nasids_size field */ + rp->nasids_size = 128; + } + xp_nasid_mask_bytes = rp->nasids_size; + xp_nasid_mask_words = xp_nasid_mask_bytes / 8; + + /* setup the pointers to the various items in the reserved page */ + xpc_part_nasids = XPC_RP_PART_NASIDS(rp); + xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); + xpc_vars = XPC_RP_VARS(rp); + xpc_vars_part = XPC_RP_VARS_PART(rp); + + /* + * Before clearing xpc_vars, see if a page of AMOs had been previously + * allocated. If not we'll need to allocate one and set permissions + * so that cross-partition AMOs are allowed. + * + * The allocated AMO page needs MCA reporting to remain disabled after + * XPC has unloaded. To make this work, we keep a copy of the pointer + * to this page (i.e., amos_page) in the struct xpc_vars structure, + * which is pointed to by the reserved page, and re-use that saved copy + * on subsequent loads of XPC. This AMO page is never freed, and its + * memory protections are never restricted. + */ + amos_page = xpc_vars->amos_page; + if (amos_page == NULL) { + amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0)); + if (amos_page == NULL) { + dev_err(xpc_part, "can't allocate page of AMOs\n"); + return NULL; + } + + /* + * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems + * when xpc_allow_IPI_ops() is called via xpc_hb_init(). + */ + if (!enable_shub_wars_1_1()) { + ret = sn_change_memprotect(ia64_tpa((u64)amos_page), + PAGE_SIZE, + SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) { + dev_err(xpc_part, "can't change memory " + "protections\n"); + uncached_free_page(__IA64_UNCACHED_OFFSET | + TO_PHYS((u64)amos_page)); + return NULL; + } + } + } else if (!IS_AMO_ADDRESS((u64)amos_page)) { + /* + * EFI's XPBOOT can also set amos_page in the reserved page, + * but it happens to leave it as an uncached physical address + * and we need it to be an uncached virtual, so we'll have to + * convert it. + */ + if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) { + dev_err(xpc_part, "previously used amos_page address " + "is bad = 0x%p\n", (void *)amos_page); + return NULL; + } + amos_page = (AMO_t *)TO_AMO((u64)amos_page); + } + + /* clear xpc_vars */ + memset(xpc_vars, 0, sizeof(struct xpc_vars)); + + xpc_vars->version = XPC_V_VERSION; + xpc_vars->act_nasid = cpuid_to_nasid(0); + xpc_vars->act_phys_cpuid = cpu_physical_id(0); + xpc_vars->vars_part_pa = __pa(xpc_vars_part); + xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); + xpc_vars->amos_page = amos_page; /* save for next load of XPC */ + + /* clear xpc_vars_part */ + memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * + XP_MAX_PARTITIONS); + + /* initialize the activate IRQ related AMO variables */ + for (i = 0; i < xp_nasid_mask_words; i++) + (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); + + /* initialize the engaged remote partitions related AMO variables */ + (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); + (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); + + /* timestamp of when reserved page was setup by XPC */ + rp->stamp = CURRENT_TIME; + + /* + * This signifies to the remote partition that our reserved + * page is initialized. + */ + rp->vars_pa = __pa(xpc_vars); + + return rp; +} + +/* + * Change protections to allow IPI operations (and AMO operations on + * Shub 1.1 systems). + */ +void +xpc_allow_IPI_ops(void) +{ + int node; + int nasid; + + /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ + + if (is_shub2()) { + xpc_sh2_IPI_access0 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); + xpc_sh2_IPI_access1 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); + xpc_sh2_IPI_access2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); + xpc_sh2_IPI_access3 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + -1UL); + } + + } else { + xpc_sh1_IPI_access = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + -1UL); + + /* + * Since the BIST collides with memory operations on + * SHUB 1.1 sn_change_memprotect() cannot be used. + */ + if (enable_shub_wars_1_1()) { + /* open up everything */ + xpc_prot_vec[node] = (u64)HUB_L((u64 *) + GLOBAL_MMR_ADDR + (nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0)); + HUB_S((u64 *) + GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0), + -1UL); + HUB_S((u64 *) + GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQRP_MMR_DIR_PRIVEC0), + -1UL); + } + } + } +} + +/* + * Restrict protections to disallow IPI operations (and AMO operations on + * Shub 1.1 systems). + */ +void +xpc_restrict_IPI_ops(void) +{ + int node; + int nasid; + + /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ + + if (is_shub2()) { + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + xpc_sh2_IPI_access0); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + xpc_sh2_IPI_access1); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + xpc_sh2_IPI_access2); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + xpc_sh2_IPI_access3); + } + + } else { + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + xpc_sh1_IPI_access); + + if (enable_shub_wars_1_1()) { + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0), + xpc_prot_vec[node]); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQRP_MMR_DIR_PRIVEC0), + xpc_prot_vec[node]); + } + } + } +} + +/* + * At periodic intervals, scan through all active partitions and ensure + * their heartbeat is still active. If not, the partition is deactivated. + */ +void +xpc_check_remote_hb(void) +{ + struct xpc_vars *remote_vars; + struct xpc_partition *part; + partid_t partid; + bte_result_t bres; + + remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; + + for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + + if (xpc_exiting) + break; + + if (partid == sn_partition_id) + continue; + + part = &xpc_partitions[partid]; + + if (part->act_state == XPC_P_INACTIVE || + part->act_state == XPC_P_DEACTIVATING) { + continue; + } + + /* pull the remote_hb cache line */ + bres = xp_bte_copy(part->remote_vars_pa, + (u64)remote_vars, + XPC_RP_VARS_SIZE, + (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (bres != BTE_SUCCESS) { + XPC_DEACTIVATE_PARTITION(part, + xpc_map_bte_errors(bres)); + continue; + } + + dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" + " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n", + partid, remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, + remote_vars->heartbeating_to_mask); + + if (((remote_vars->heartbeat == part->last_heartbeat) && + (remote_vars->heartbeat_offline == 0)) || + !xpc_hb_allowed(sn_partition_id, remote_vars)) { + + XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat); + continue; + } + + part->last_heartbeat = remote_vars->heartbeat; + } +} + +/* + * Get a copy of a portion of the remote partition's rsvd page. + * + * remote_rp points to a buffer that is cacheline aligned for BTE copies and + * is large enough to contain a copy of their reserved page header and + * part_nasids mask. + */ +static enum xpc_retval +xpc_get_remote_rp(int nasid, u64 *discovered_nasids, + struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) +{ + int bres, i; + + /* get the reserved page's physical address */ + + *remote_rp_pa = xpc_get_rsvd_page_pa(nasid); + if (*remote_rp_pa == 0) + return xpcNoRsvdPageAddr; + + /* pull over the reserved page header and part_nasids mask */ + bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp, + XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes, + (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (bres != BTE_SUCCESS) + return xpc_map_bte_errors(bres); + + if (discovered_nasids != NULL) { + u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); + + for (i = 0; i < xp_nasid_mask_words; i++) + discovered_nasids[i] |= remote_part_nasids[i]; + } + + /* check that the partid is for another partition */ + + if (remote_rp->partid < 1 || + remote_rp->partid > (XP_MAX_PARTITIONS - 1)) { + return xpcInvalidPartid; + } + + if (remote_rp->partid == sn_partition_id) + return xpcLocalPartid; + + if (XPC_VERSION_MAJOR(remote_rp->version) != + XPC_VERSION_MAJOR(XPC_RP_VERSION)) { + return xpcBadVersion; + } + + return xpcSuccess; +} + +/* + * Get a copy of the remote partition's XPC variables from the reserved page. + * + * remote_vars points to a buffer that is cacheline aligned for BTE copies and + * assumed to be of size XPC_RP_VARS_SIZE. + */ +static enum xpc_retval +xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) +{ + int bres; + + if (remote_vars_pa == 0) + return xpcVarsNotSet; + + /* pull over the cross partition variables */ + bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE, + (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (bres != BTE_SUCCESS) + return xpc_map_bte_errors(bres); + + if (XPC_VERSION_MAJOR(remote_vars->version) != + XPC_VERSION_MAJOR(XPC_V_VERSION)) { + return xpcBadVersion; + } + + return xpcSuccess; +} + +/* + * Update the remote partition's info. + */ +static void +xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, + struct timespec *remote_rp_stamp, u64 remote_rp_pa, + u64 remote_vars_pa, struct xpc_vars *remote_vars) +{ + part->remote_rp_version = remote_rp_version; + dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", + part->remote_rp_version); + + part->remote_rp_stamp = *remote_rp_stamp; + dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", + part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); + + part->remote_rp_pa = remote_rp_pa; + dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); + + part->remote_vars_pa = remote_vars_pa; + dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", + part->remote_vars_pa); + + part->last_heartbeat = remote_vars->heartbeat; + dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", + part->last_heartbeat); + + part->remote_vars_part_pa = remote_vars->vars_part_pa; + dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", + part->remote_vars_part_pa); + + part->remote_act_nasid = remote_vars->act_nasid; + dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", + part->remote_act_nasid); + + part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; + dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", + part->remote_act_phys_cpuid); + + part->remote_amos_page_pa = remote_vars->amos_page_pa; + dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", + part->remote_amos_page_pa); + + part->remote_vars_version = remote_vars->version; + dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", + part->remote_vars_version); +} + +/* + * Prior code has determined the nasid which generated an IPI. Inspect + * that nasid to determine if its partition needs to be activated or + * deactivated. + * + * A partition is consider "awaiting activation" if our partition + * flags indicate it is not active and it has a heartbeat. A + * partition is considered "awaiting deactivation" if our partition + * flags indicate it is active but it has no heartbeat or it is not + * sending its heartbeat to us. + * + * To determine the heartbeat, the remote nasid must have a properly + * initialized reserved page. + */ +static void +xpc_identify_act_IRQ_req(int nasid) +{ + struct xpc_rsvd_page *remote_rp; + struct xpc_vars *remote_vars; + u64 remote_rp_pa; + u64 remote_vars_pa; + int remote_rp_version; + int reactivate = 0; + int stamp_diff; + struct timespec remote_rp_stamp = { 0, 0 }; + partid_t partid; + struct xpc_partition *part; + enum xpc_retval ret; + + /* pull over the reserved page structure */ + + remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer; + + ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); + if (ret != xpcSuccess) { + dev_warn(xpc_part, "unable to get reserved page from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + return; + } + + remote_vars_pa = remote_rp->vars_pa; + remote_rp_version = remote_rp->version; + if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) + remote_rp_stamp = remote_rp->stamp; + + partid = remote_rp->partid; + part = &xpc_partitions[partid]; + + /* pull over the cross partition variables */ + + remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; + + ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); + if (ret != xpcSuccess) { + + dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + return; + } + + part->act_IRQ_rcvd++; + + dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " + "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd, + remote_vars->heartbeat, remote_vars->heartbeating_to_mask); + + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + if (xpc_partition_disengage_requested(1UL << partid)) { + /* + * Other side is waiting on us to disengage, + * even though we already have. + */ + return; + } + } else { + /* other side doesn't support disengage requests */ + xpc_clear_partition_disengage_request(1UL << partid); + } + + xpc_activate_partition(part); + return; + } + + DBUG_ON(part->remote_rp_version == 0); + DBUG_ON(part->remote_vars_version == 0); + + if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)); + /* see if the other side rebooted */ + if (part->remote_amos_page_pa == + remote_vars->amos_page_pa && + xpc_hb_allowed(sn_partition_id, remote_vars)) { + /* doesn't look that way, so ignore the IPI */ + return; + } + } + + /* + * Other side rebooted and previous XPC didn't support the + * disengage request, so we don't need to do anything special. + */ + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + return; + } + + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + /* + * Other side rebooted and previous XPC did support the + * disengage request, but the new one doesn't. + */ + + xpc_clear_partition_engaged(1UL << partid); + xpc_clear_partition_disengage_request(1UL << partid); + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + + } else { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, + &remote_rp_stamp); + if (stamp_diff != 0) { + DBUG_ON(stamp_diff >= 0); + + /* + * Other side rebooted and the previous XPC did support + * the disengage request, as does the new one. + */ + + DBUG_ON(xpc_partition_engaged(1UL << partid)); + DBUG_ON(xpc_partition_disengage_requested(1UL << + partid)); + + xpc_update_partition_info(part, remote_rp_version, + &remote_rp_stamp, + remote_rp_pa, remote_vars_pa, + remote_vars); + reactivate = 1; + } + } + + if (part->disengage_request_timeout > 0 && + !xpc_partition_disengaged(part)) { + /* still waiting on other side to disengage from us */ + return; + } + + if (reactivate) { + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpcReactivating); + + } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && + xpc_partition_disengage_requested(1UL << partid)) { + XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown); + } +} + +/* + * Loop through the activation AMO variables and process any bits + * which are set. Each bit indicates a nasid sending a partition + * activation or deactivation request. + * + * Return #of IRQs detected. + */ +int +xpc_identify_act_IRQ_sender(void) +{ + int word, bit; + u64 nasid_mask; + u64 nasid; /* remote nasid */ + int n_IRQs_detected = 0; + AMO_t *act_amos; + + act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; + + /* scan through act AMO variable looking for non-zero entries */ + for (word = 0; word < xp_nasid_mask_words; word++) { + + if (xpc_exiting) + break; + + nasid_mask = xpc_IPI_receive(&act_amos[word]); + if (nasid_mask == 0) { + /* no IRQs from nasids in this variable */ + continue; + } + + dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word, + nasid_mask); + + /* + * If this nasid has been added to the machine since + * our partition was reset, this will retain the + * remote nasid in our reserved pages machine mask. + * This is used in the event of module reload. + */ + xpc_mach_nasids[word] |= nasid_mask; + + /* locate the nasid(s) which sent interrupts */ + + for (bit = 0; bit < (8 * sizeof(u64)); bit++) { + if (nasid_mask & (1UL << bit)) { + n_IRQs_detected++; + nasid = XPC_NASID_FROM_W_B(word, bit); + dev_dbg(xpc_part, "interrupt from nasid %ld\n", + nasid); + xpc_identify_act_IRQ_req(nasid); + } + } + } + return n_IRQs_detected; +} + +/* + * See if the other side has responded to a partition disengage request + * from us. + */ +int +xpc_partition_disengaged(struct xpc_partition *part) +{ + partid_t partid = XPC_PARTID(part); + int disengaged; + + disengaged = (xpc_partition_engaged(1UL << partid) == 0); + if (part->disengage_request_timeout) { + if (!disengaged) { + if (time_before(jiffies, + part->disengage_request_timeout)) { + /* timelimit hasn't been reached yet */ + return 0; + } + + /* + * Other side hasn't responded to our disengage + * request in a timely fashion, so assume it's dead. + */ + + dev_info(xpc_part, "disengage from remote partition %d " + "timed out\n", partid); + xpc_disengage_request_timedout = 1; + xpc_clear_partition_engaged(1UL << partid); + disengaged = 1; + } + part->disengage_request_timeout = 0; + + /* cancel the timer function, provided it's not us */ + if (!in_interrupt()) { + del_singleshot_timer_sync(&part-> + disengage_request_timer); + } + + DBUG_ON(part->act_state != XPC_P_DEACTIVATING && + part->act_state != XPC_P_INACTIVE); + if (part->act_state != XPC_P_INACTIVE) + xpc_wakeup_channel_mgr(part); + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) + xpc_cancel_partition_disengage_request(part); + } + return disengaged; +} + +/* + * Mark specified partition as active. + */ +enum xpc_retval +xpc_mark_partition_active(struct xpc_partition *part) +{ + unsigned long irq_flags; + enum xpc_retval ret; + + dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part)); + + spin_lock_irqsave(&part->act_lock, irq_flags); + if (part->act_state == XPC_P_ACTIVATING) { + part->act_state = XPC_P_ACTIVE; + ret = xpcSuccess; + } else { + DBUG_ON(part->reason == xpcSuccess); + ret = part->reason; + } + spin_unlock_irqrestore(&part->act_lock, irq_flags); + + return ret; +} + +/* + * Notify XPC that the partition is down. + */ +void +xpc_deactivate_partition(const int line, struct xpc_partition *part, + enum xpc_retval reason) +{ + unsigned long irq_flags; + + spin_lock_irqsave(&part->act_lock, irq_flags); + + if (part->act_state == XPC_P_INACTIVE) { + XPC_SET_REASON(part, reason, line); + spin_unlock_irqrestore(&part->act_lock, irq_flags); + if (reason == xpcReactivating) { + /* we interrupt ourselves to reactivate partition */ + xpc_IPI_send_reactivate(part); + } + return; + } + if (part->act_state == XPC_P_DEACTIVATING) { + if ((part->reason == xpcUnloading && reason != xpcUnloading) || + reason == xpcReactivating) { + XPC_SET_REASON(part, reason, line); + } + spin_unlock_irqrestore(&part->act_lock, irq_flags); + return; + } + + part->act_state = XPC_P_DEACTIVATING; + XPC_SET_REASON(part, reason, line); + + spin_unlock_irqrestore(&part->act_lock, irq_flags); + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + xpc_request_partition_disengage(part); + xpc_IPI_send_disengage(part); + + /* set a timelimit on the disengage request */ + part->disengage_request_timeout = jiffies + + (xpc_disengage_request_timelimit * HZ); + part->disengage_request_timer.expires = + part->disengage_request_timeout; + add_timer(&part->disengage_request_timer); + } + + dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", + XPC_PARTID(part), reason); + + xpc_partition_going_down(part, reason); +} + +/* + * Mark specified partition as inactive. + */ +void +xpc_mark_partition_inactive(struct xpc_partition *part) +{ + unsigned long irq_flags; + + dev_dbg(xpc_part, "setting partition %d to INACTIVE\n", + XPC_PARTID(part)); + + spin_lock_irqsave(&part->act_lock, irq_flags); + part->act_state = XPC_P_INACTIVE; + spin_unlock_irqrestore(&part->act_lock, irq_flags); + part->remote_rp_pa = 0; +} + +/* + * SAL has provided a partition and machine mask. The partition mask + * contains a bit for each even nasid in our partition. The machine + * mask contains a bit for each even nasid in the entire machine. + * + * Using those two bit arrays, we can determine which nasids are + * known in the machine. Each should also have a reserved page + * initialized if they are available for partitioning. + */ +void +xpc_discovery(void) +{ + void *remote_rp_base; + struct xpc_rsvd_page *remote_rp; + struct xpc_vars *remote_vars; + u64 remote_rp_pa; + u64 remote_vars_pa; + int region; + int region_size; + int max_regions; + int nasid; + struct xpc_rsvd_page *rp; + partid_t partid; + struct xpc_partition *part; + u64 *discovered_nasids; + enum xpc_retval ret; + + remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + + xp_nasid_mask_bytes, + GFP_KERNEL, &remote_rp_base); + if (remote_rp == NULL) + return; + + remote_vars = (struct xpc_vars *)remote_rp; + + discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words, + GFP_KERNEL); + if (discovered_nasids == NULL) { + kfree(remote_rp_base); + return; + } + + rp = (struct xpc_rsvd_page *)xpc_rsvd_page; + + /* + * The term 'region' in this context refers to the minimum number of + * nodes that can comprise an access protection grouping. The access + * protection is in regards to memory, IOI and IPI. + */ + max_regions = 64; + region_size = sn_region_size; + + switch (region_size) { + case 128: + max_regions *= 2; + case 64: + max_regions *= 2; + case 32: + max_regions *= 2; + region_size = 16; + DBUG_ON(!is_shub2()); + } + + for (region = 0; region < max_regions; region++) { + + if (xpc_exiting) + break; + + dev_dbg(xpc_part, "searching region %d\n", region); + + for (nasid = (region * region_size * 2); + nasid < ((region + 1) * region_size * 2); nasid += 2) { + + if (xpc_exiting) + break; + + dev_dbg(xpc_part, "checking nasid %d\n", nasid); + + if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) { + dev_dbg(xpc_part, "PROM indicates Nasid %d is " + "part of the local partition; skipping " + "region\n", nasid); + break; + } + + if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) { + dev_dbg(xpc_part, "PROM indicates Nasid %d was " + "not on Numa-Link network at reset\n", + nasid); + continue; + } + + if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) { + dev_dbg(xpc_part, "Nasid %d is part of a " + "partition which was previously " + "discovered\n", nasid); + continue; + } + + /* pull over the reserved page structure */ + + ret = xpc_get_remote_rp(nasid, discovered_nasids, + remote_rp, &remote_rp_pa); + if (ret != xpcSuccess) { + dev_dbg(xpc_part, "unable to get reserved page " + "from nasid %d, reason=%d\n", nasid, + ret); + + if (ret == xpcLocalPartid) + break; + + continue; + } + + remote_vars_pa = remote_rp->vars_pa; + + partid = remote_rp->partid; + part = &xpc_partitions[partid]; + + /* pull over the cross partition variables */ + + ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); + if (ret != xpcSuccess) { + dev_dbg(xpc_part, "unable to get XPC variables " + "from nasid %d, reason=%d\n", nasid, + ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + continue; + } + + if (part->act_state != XPC_P_INACTIVE) { + dev_dbg(xpc_part, "partition %d on nasid %d is " + "already activating\n", partid, nasid); + break; + } + + /* + * Register the remote partition's AMOs with SAL so it + * can handle and cleanup errors within that address + * range should the remote partition go down. We don't + * unregister this range because it is difficult to + * tell when outstanding writes to the remote partition + * are finished and thus when it is thus safe to + * unregister. This should not result in wasted space + * in the SAL xp_addr_region table because we should + * get the same page for remote_act_amos_pa after + * module reloads and system reboots. + */ + if (sn_register_xp_addr_region + (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) { + dev_dbg(xpc_part, + "partition %d failed to " + "register xp_addr region 0x%016lx\n", + partid, remote_vars->amos_page_pa); + + XPC_SET_REASON(part, xpcPhysAddrRegFailed, + __LINE__); + break; + } + + /* + * The remote nasid is valid and available. + * Send an interrupt to that nasid to notify + * it that we are ready to begin activation. + */ + dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, " + "nasid %d, phys_cpuid 0x%x\n", + remote_vars->amos_page_pa, + remote_vars->act_nasid, + remote_vars->act_phys_cpuid); + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)) { + part->remote_amos_page_pa = + remote_vars->amos_page_pa; + xpc_mark_partition_disengaged(part); + xpc_cancel_partition_disengage_request(part); + } + xpc_IPI_send_activate(remote_vars); + } + } + + kfree(discovered_nasids); + kfree(remote_rp_base); +} + +/* + * Given a partid, get the nasids owned by that partition from the + * remote partition's reserved page. + */ +enum xpc_retval +xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask) +{ + struct xpc_partition *part; + u64 part_nasid_pa; + int bte_res; + + part = &xpc_partitions[partid]; + if (part->remote_rp_pa == 0) + return xpcPartitionDown; + + memset(nasid_mask, 0, XP_NASID_MASK_BYTES); + + part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); + + bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask, + xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), + NULL); + + return xpc_map_bte_errors(bte_res); +} diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c new file mode 100644 index 0000000..a9543c6 --- /dev/null +++ b/drivers/misc/sgi-xp/xpnet.c @@ -0,0 +1,677 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved. + */ + +/* + * Cross Partition Network Interface (XPNET) support + * + * XPNET provides a virtual network layered on top of the Cross + * Partition communication layer. + * + * XPNET provides direct point-to-point and broadcast-like support + * for an ethernet-like device. The ethernet broadcast medium is + * replaced with a point-to-point message structure which passes + * pointers to a DMA-capable block that a remote partition should + * retrieve and pass to the upper level networking layer. + * + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/smp.h> +#include <linux/string.h> +#include <asm/sn/bte.h> +#include <asm/sn/io.h> +#include <asm/sn/sn_sal.h> +#include <asm/atomic.h> +#include "xp.h" + +/* + * The message payload transferred by XPC. + * + * buf_pa is the physical address where the DMA should pull from. + * + * NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a + * cacheline boundary. To accomplish this, we record the number of + * bytes from the beginning of the first cacheline to the first useful + * byte of the skb (leadin_ignore) and the number of bytes from the + * last useful byte of the skb to the end of the last cacheline + * (tailout_ignore). + * + * size is the number of bytes to transfer which includes the skb->len + * (useful bytes of the senders skb) plus the leadin and tailout + */ +struct xpnet_message { + u16 version; /* Version for this message */ + u16 embedded_bytes; /* #of bytes embedded in XPC message */ + u32 magic; /* Special number indicating this is xpnet */ + u64 buf_pa; /* phys address of buffer to retrieve */ + u32 size; /* #of bytes in buffer */ + u8 leadin_ignore; /* #of bytes to ignore at the beginning */ + u8 tailout_ignore; /* #of bytes to ignore at the end */ + unsigned char data; /* body of small packets */ +}; + +/* + * Determine the size of our message, the cacheline aligned size, + * and then the number of message will request from XPC. + * + * XPC expects each message to exist in an individual cacheline. + */ +#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) +#define XPNET_MSG_DATA_MAX \ + (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) +#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) +#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) + +#define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) +#define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) + +/* + * Version number of XPNET implementation. XPNET can always talk to versions + * with same major #, and never talk to versions with a different version. + */ +#define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor)) +#define XPNET_VERSION_MAJOR(_v) ((_v) >> 4) +#define XPNET_VERSION_MINOR(_v) ((_v) & 0xf) + +#define XPNET_VERSION _XPNET_VERSION(1, 0) /* version 1.0 */ +#define XPNET_VERSION_EMBED _XPNET_VERSION(1, 1) /* version 1.1 */ +#define XPNET_MAGIC 0x88786984 /* "XNET" */ + +#define XPNET_VALID_MSG(_m) \ + ((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \ + && (msg->magic == XPNET_MAGIC)) + +#define XPNET_DEVICE_NAME "xp0" + +/* + * When messages are queued with xpc_send_notify, a kmalloc'd buffer + * of the following type is passed as a notification cookie. When the + * notification function is called, we use the cookie to decide + * whether all outstanding message sends have completed. The skb can + * then be released. + */ +struct xpnet_pending_msg { + struct list_head free_list; + struct sk_buff *skb; + atomic_t use_count; +}; + +/* driver specific structure pointed to by the device structure */ +struct xpnet_dev_private { + struct net_device_stats stats; +}; + +struct net_device *xpnet_device; + +/* + * When we are notified of other partitions activating, we add them to + * our bitmask of partitions to which we broadcast. + */ +static u64 xpnet_broadcast_partitions; +/* protect above */ +static DEFINE_SPINLOCK(xpnet_broadcast_lock); + +/* + * Since the Block Transfer Engine (BTE) is being used for the transfer + * and it relies upon cache-line size transfers, we need to reserve at + * least one cache-line for head and tail alignment. The BTE is + * limited to 8MB transfers. + * + * Testing has shown that changing MTU to greater than 64KB has no effect + * on TCP as the two sides negotiate a Max Segment Size that is limited + * to 64K. Other protocols May use packets greater than this, but for + * now, the default is 64KB. + */ +#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES) +/* 32KB has been determined to be the ideal */ +#define XPNET_DEF_MTU (0x8000UL) + +/* + * The partition id is encapsulated in the MAC address. The following + * define locates the octet the partid is in. + */ +#define XPNET_PARTID_OCTET 1 +#define XPNET_LICENSE_OCTET 2 + +/* + * Define the XPNET debug device structure that is to be used with dev_dbg(), + * dev_err(), dev_warn(), and dev_info(). + */ +struct device_driver xpnet_dbg_name = { + .name = "xpnet" +}; + +struct device xpnet_dbg_subname = { + .bus_id = {0}, /* set to "" */ + .driver = &xpnet_dbg_name +}; + +struct device *xpnet = &xpnet_dbg_subname; + +/* + * Packet was recevied by XPC and forwarded to us. + */ +static void +xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg) +{ + struct sk_buff *skb; + bte_result_t bret; + struct xpnet_dev_private *priv = + (struct xpnet_dev_private *)xpnet_device->priv; + + if (!XPNET_VALID_MSG(msg)) { + /* + * Packet with a different XPC version. Ignore. + */ + xpc_received(partid, channel, (void *)msg); + + priv->stats.rx_errors++; + + return; + } + dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); + + /* reserve an extra cache line */ + skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); + if (!skb) { + dev_err(xpnet, "failed on dev_alloc_skb(%d)\n", + msg->size + L1_CACHE_BYTES); + + xpc_received(partid, channel, (void *)msg); + + priv->stats.rx_errors++; + + return; + } + + /* + * The allocated skb has some reserved space. + * In order to use bte_copy, we need to get the + * skb->data pointer moved forward. + */ + skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & + (L1_CACHE_BYTES - 1)) + + msg->leadin_ignore)); + + /* + * Update the tail pointer to indicate data actually + * transferred. + */ + skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore)); + + /* + * Move the data over from the other side. + */ + if ((XPNET_VERSION_MINOR(msg->version) == 1) && + (msg->embedded_bytes != 0)) { + dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, " + "%lu)\n", skb->data, &msg->data, + (size_t)msg->embedded_bytes); + + skb_copy_to_linear_data(skb, &msg->data, + (size_t)msg->embedded_bytes); + } else { + dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" + "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, + (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + msg->size); + + bret = bte_copy(msg->buf_pa, + __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + + if (bret != BTE_SUCCESS) { + /* + * >>> Need better way of cleaning skb. Currently skb + * >>> appears in_use and we can't just call + * >>> dev_kfree_skb. + */ + dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " + "error=0x%x\n", (void *)msg->buf_pa, + (void *)__pa((u64)skb->data & + ~(L1_CACHE_BYTES - 1)), + msg->size, bret); + + xpc_received(partid, channel, (void *)msg); + + priv->stats.rx_errors++; + + return; + } + } + + dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "skb->end=0x%p skb->len=%d\n", (void *)skb->head, + (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), + skb->len); + + skb->protocol = eth_type_trans(skb, xpnet_device); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + dev_dbg(xpnet, "passing skb to network layer\n" + KERN_DEBUG "\tskb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "skb->end=0x%p skb->len=%d\n", + (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), + skb_end_pointer(skb), skb->len); + + xpnet_device->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += skb->len + ETH_HLEN; + + netif_rx_ni(skb); + xpc_received(partid, channel, (void *)msg); +} + +/* + * This is the handler which XPC calls during any sort of change in + * state or message reception on a connection. + */ +static void +xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel, + void *data, void *key) +{ + long bp; + + DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(channel != XPC_NET_CHANNEL); + + switch (reason) { + case xpcMsgReceived: /* message received */ + DBUG_ON(data == NULL); + + xpnet_receive(partid, channel, (struct xpnet_message *)data); + break; + + case xpcConnected: /* connection completed to a partition */ + spin_lock_bh(&xpnet_broadcast_lock); + xpnet_broadcast_partitions |= 1UL << (partid - 1); + bp = xpnet_broadcast_partitions; + spin_unlock_bh(&xpnet_broadcast_lock); + + netif_carrier_on(xpnet_device); + + dev_dbg(xpnet, "%s connection created to partition %d; " + "xpnet_broadcast_partitions=0x%lx\n", + xpnet_device->name, partid, bp); + break; + + default: + spin_lock_bh(&xpnet_broadcast_lock); + xpnet_broadcast_partitions &= ~(1UL << (partid - 1)); + bp = xpnet_broadcast_partitions; + spin_unlock_bh(&xpnet_broadcast_lock); + + if (bp == 0) + netif_carrier_off(xpnet_device); + + dev_dbg(xpnet, "%s disconnected from partition %d; " + "xpnet_broadcast_partitions=0x%lx\n", + xpnet_device->name, partid, bp); + break; + + } +} + +static int +xpnet_dev_open(struct net_device *dev) +{ + enum xpc_retval ret; + + dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " + "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, + XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, + XPNET_MAX_IDLE_KTHREADS); + + ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, + XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, + XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS); + if (ret != xpcSuccess) { + dev_err(xpnet, "ifconfig up of %s failed on XPC connect, " + "ret=%d\n", dev->name, ret); + + return -ENOMEM; + } + + dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name); + + return 0; +} + +static int +xpnet_dev_stop(struct net_device *dev) +{ + xpc_disconnect(XPC_NET_CHANNEL); + + dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name); + + return 0; +} + +static int +xpnet_dev_change_mtu(struct net_device *dev, int new_mtu) +{ + /* 68 comes from min TCP+IP+MAC header */ + if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) { + dev_err(xpnet, "ifconfig %s mtu %d failed; value must be " + "between 68 and %ld\n", dev->name, new_mtu, + XPNET_MAX_MTU); + return -EINVAL; + } + + dev->mtu = new_mtu; + dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu); + return 0; +} + +/* + * Required for the net_device structure. + */ +static int +xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map) +{ + return 0; +} + +/* + * Return statistics to the caller. + */ +static struct net_device_stats * +xpnet_dev_get_stats(struct net_device *dev) +{ + struct xpnet_dev_private *priv; + + priv = (struct xpnet_dev_private *)dev->priv; + + return &priv->stats; +} + +/* + * Notification that the other end has received the message and + * DMA'd the skb information. At this point, they are done with + * our side. When all recipients are done processing, we + * release the skb and then release our pending message structure. + */ +static void +xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel, + void *__qm) +{ + struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm; + + DBUG_ON(queued_msg == NULL); + + dev_dbg(xpnet, "message to %d notified with reason %d\n", + partid, reason); + + if (atomic_dec_return(&queued_msg->use_count) == 0) { + dev_dbg(xpnet, "all acks for skb->head=-x%p\n", + (void *)queued_msg->skb->head); + + dev_kfree_skb_any(queued_msg->skb); + kfree(queued_msg); + } +} + +/* + * Network layer has formatted a packet (skb) and is ready to place it + * "on the wire". Prepare and send an xpnet_message to all partitions + * which have connected with us and are targets of this packet. + * + * MAC-NOTE: For the XPNET driver, the MAC address contains the + * destination partition_id. If the destination partition id word + * is 0xff, this packet is to broadcast to all partitions. + */ +static int +xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct xpnet_pending_msg *queued_msg; + enum xpc_retval ret; + struct xpnet_message *msg; + u64 start_addr, end_addr; + long dp; + u8 second_mac_octet; + partid_t dest_partid; + struct xpnet_dev_private *priv; + u16 embedded_bytes; + + priv = (struct xpnet_dev_private *)dev->priv; + + dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " + "skb->end=0x%p skb->len=%d\n", (void *)skb->head, + (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), + skb->len); + + /* + * The xpnet_pending_msg tracks how many outstanding + * xpc_send_notifies are relying on this skb. When none + * remain, release the skb. + */ + queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC); + if (queued_msg == NULL) { + dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping " + "packet\n", sizeof(struct xpnet_pending_msg)); + + priv->stats.tx_errors++; + + return -ENOMEM; + } + + /* get the beginning of the first cacheline and end of last */ + start_addr = ((u64)skb->data & ~(L1_CACHE_BYTES - 1)); + end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); + + /* calculate how many bytes to embed in the XPC message */ + embedded_bytes = 0; + if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { + /* skb->data does fit so embed */ + embedded_bytes = skb->len; + } + + /* + * Since the send occurs asynchronously, we set the count to one + * and begin sending. Any sends that happen to complete before + * we are done sending will not free the skb. We will be left + * with that task during exit. This also handles the case of + * a packet destined for a partition which is no longer up. + */ + atomic_set(&queued_msg->use_count, 1); + queued_msg->skb = skb; + + second_mac_octet = skb->data[XPNET_PARTID_OCTET]; + if (second_mac_octet == 0xff) { + /* we are being asked to broadcast to all partitions */ + dp = xpnet_broadcast_partitions; + } else if (second_mac_octet != 0) { + dp = xpnet_broadcast_partitions & + (1UL << (second_mac_octet - 1)); + } else { + /* 0 is an invalid partid. Ignore */ + dp = 0; + } + dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); + + /* + * If we wanted to allow promiscuous mode to work like an + * unswitched network, this would be a good point to OR in a + * mask of partitions which should be receiving all packets. + */ + + /* + * Main send loop. + */ + for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; + dest_partid++) { + + if (!(dp & (1UL << (dest_partid - 1)))) { + /* not destined for this partition */ + continue; + } + + /* remove this partition from the destinations mask */ + dp &= ~(1UL << (dest_partid - 1)); + + /* found a partition to send to */ + + ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, + XPC_NOWAIT, (void **)&msg); + if (unlikely(ret != xpcSuccess)) + continue; + + msg->embedded_bytes = embedded_bytes; + if (unlikely(embedded_bytes != 0)) { + msg->version = XPNET_VERSION_EMBED; + dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", + &msg->data, skb->data, (size_t)embedded_bytes); + skb_copy_from_linear_data(skb, &msg->data, + (size_t)embedded_bytes); + } else { + msg->version = XPNET_VERSION; + } + msg->magic = XPNET_MAGIC; + msg->size = end_addr - start_addr; + msg->leadin_ignore = (u64)skb->data - start_addr; + msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); + msg->buf_pa = __pa(start_addr); + + dev_dbg(xpnet, "sending XPC message to %d:%d\n" + KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", + dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); + + atomic_inc(&queued_msg->use_count); + + ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, + xpnet_send_completed, queued_msg); + if (unlikely(ret != xpcSuccess)) { + atomic_dec(&queued_msg->use_count); + continue; + } + } + + if (atomic_dec_return(&queued_msg->use_count) == 0) { + dev_dbg(xpnet, "no partitions to receive packet destined for " + "%d\n", dest_partid); + + dev_kfree_skb(skb); + kfree(queued_msg); + } + + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len; + + return 0; +} + +/* + * Deal with transmit timeouts coming from the network layer. + */ +static void +xpnet_dev_tx_timeout(struct net_device *dev) +{ + struct xpnet_dev_private *priv; + + priv = (struct xpnet_dev_private *)dev->priv; + + priv->stats.tx_errors++; + return; +} + +static int __init +xpnet_init(void) +{ + int i; + u32 license_num; + int result = -ENOMEM; + + if (!ia64_platform_is("sn2")) + return -ENODEV; + + dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); + + /* + * use ether_setup() to init the majority of our device + * structure and then override the necessary pieces. + */ + xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), + XPNET_DEVICE_NAME, ether_setup); + if (xpnet_device == NULL) + return -ENOMEM; + + netif_carrier_off(xpnet_device); + + xpnet_device->mtu = XPNET_DEF_MTU; + xpnet_device->change_mtu = xpnet_dev_change_mtu; + xpnet_device->open = xpnet_dev_open; + xpnet_device->get_stats = xpnet_dev_get_stats; + xpnet_device->stop = xpnet_dev_stop; + xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit; + xpnet_device->tx_timeout = xpnet_dev_tx_timeout; + xpnet_device->set_config = xpnet_dev_set_config; + + /* + * Multicast assumes the LSB of the first octet is set for multicast + * MAC addresses. We chose the first octet of the MAC to be unlikely + * to collide with any vendor's officially issued MAC. + */ + xpnet_device->dev_addr[0] = 0xfe; + xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; + license_num = sn_partition_serial_number_val(); + for (i = 3; i >= 0; i--) { + xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = + license_num & 0xff; + license_num = license_num >> 8; + } + + /* + * ether_setup() sets this to a multicast device. We are + * really not supporting multicast at this time. + */ + xpnet_device->flags &= ~IFF_MULTICAST; + + /* + * No need to checksum as it is a DMA transfer. The BTE will + * report an error if the data is not retrievable and the + * packet will be dropped. + */ + xpnet_device->features = NETIF_F_NO_CSUM; + + result = register_netdev(xpnet_device); + if (result != 0) + free_netdev(xpnet_device); + + return result; +} + +module_init(xpnet_init); + +static void __exit +xpnet_exit(void) +{ + dev_info(xpnet, "unregistering network device %s\n", + xpnet_device[0].name); + + unregister_netdev(xpnet_device); + + free_netdev(xpnet_device); +} + +module_exit(xpnet_exit); + +MODULE_AUTHOR("Silicon Graphics, Inc."); +MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 899e3f7..02ff3d1 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -315,7 +315,7 @@ static void sony_laptop_report_input_event(u8 event) break; default: - if (event > ARRAY_SIZE(sony_laptop_input_index)) { + if (event >= ARRAY_SIZE(sony_laptop_input_index)) { dprintk("sony_laptop_report_input_event, event not known: %d\n", event); break; } diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index bb269d0..3f28f6e 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define TPACPI_VERSION "0.19" +#define TPACPI_VERSION "0.20" #define TPACPI_SYSFS_VERSION 0x020200 /* @@ -67,6 +67,7 @@ #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> #include <linux/input.h> +#include <linux/leds.h> #include <asm/uaccess.h> #include <linux/dmi.h> @@ -85,6 +86,8 @@ #define TP_CMOS_VOLUME_MUTE 2 #define TP_CMOS_BRIGHTNESS_UP 4 #define TP_CMOS_BRIGHTNESS_DOWN 5 +#define TP_CMOS_THINKLIGHT_ON 12 +#define TP_CMOS_THINKLIGHT_OFF 13 /* NVRAM Addresses */ enum tp_nvram_addr { @@ -133,8 +136,12 @@ enum { #define TPACPI_PROC_DIR "ibm" #define TPACPI_ACPI_EVENT_PREFIX "ibm" #define TPACPI_DRVR_NAME TPACPI_FILE +#define TPACPI_DRVR_SHORTNAME "tpacpi" #define TPACPI_HWMON_DRVR_NAME TPACPI_NAME "_hwmon" +#define TPACPI_NVRAM_KTHREAD_NAME "ktpacpi_nvramd" +#define TPACPI_WORKQUEUE_NAME "ktpacpid" + #define TPACPI_MAX_ACPI_ARGS 3 /* Debugging */ @@ -225,6 +232,7 @@ static struct { u32 light:1; u32 light_status:1; u32 bright_16levels:1; + u32 bright_acpimode:1; u32 wan:1; u32 fan_ctrl_status_undef:1; u32 input_device_registered:1; @@ -236,6 +244,11 @@ static struct { u32 hotkey_poll_active:1; } tp_features; +static struct { + u16 hotkey_mask_ff:1; + u16 bright_cmos_ec_unsync:1; +} tp_warned; + struct thinkpad_id_data { unsigned int vendor; /* ThinkPad vendor: * PCI_VENDOR_ID_IBM/PCI_VENDOR_ID_LENOVO */ @@ -246,7 +259,8 @@ struct thinkpad_id_data { u16 bios_model; /* Big Endian, TP-1Y = 0x5931, 0 = unknown */ u16 ec_model; - char *model_str; + char *model_str; /* ThinkPad T43 */ + char *nummodel_str; /* 9384A9C for a 9384-A9C model */ }; static struct thinkpad_id_data thinkpad_id; @@ -259,6 +273,16 @@ static enum { static int experimental; static u32 dbg_level; +static struct workqueue_struct *tpacpi_wq; + +/* Special LED class that can defer work */ +struct tpacpi_led_classdev { + struct led_classdev led_classdev; + struct work_struct work; + enum led_brightness new_brightness; + unsigned int led; +}; + /**************************************************************************** **************************************************************************** * @@ -807,6 +831,80 @@ static int parse_strtoul(const char *buf, return 0; } +static int __init tpacpi_query_bcl_levels(acpi_handle handle) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + int rc; + + if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { + obj = (union acpi_object *)buffer.pointer; + if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { + printk(TPACPI_ERR "Unknown _BCL data, " + "please report this to %s\n", TPACPI_MAIL); + rc = 0; + } else { + rc = obj->package.count; + } + } else { + return 0; + } + + kfree(buffer.pointer); + return rc; +} + +static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle, + u32 lvl, void *context, void **rv) +{ + char name[ACPI_PATH_SEGMENT_LENGTH]; + struct acpi_buffer buffer = { sizeof(name), &name }; + + if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && + !strncmp("_BCL", name, sizeof(name) - 1)) { + BUG_ON(!rv || !*rv); + **(int **)rv = tpacpi_query_bcl_levels(handle); + return AE_CTRL_TERMINATE; + } else { + return AE_OK; + } +} + +/* + * Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map + */ +static int __init tpacpi_check_std_acpi_brightness_support(void) +{ + int status; + int bcl_levels = 0; + void *bcl_ptr = &bcl_levels; + + if (!vid_handle) { + TPACPI_ACPIHANDLE_INIT(vid); + } + if (!vid_handle) + return 0; + + /* + * Search for a _BCL method, and execute it. This is safe on all + * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista + * BIOS in ACPI backlight control mode. We do NOT have to care + * about calling the _BCL method in an enabled video device, any + * will do for our purposes. + */ + + status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, + tpacpi_acpi_walk_find_bcl, NULL, + &bcl_ptr); + + if (ACPI_SUCCESS(status) && bcl_levels > 2) { + tp_features.bright_acpimode = 1; + return (bcl_levels - 2); + } + + return 0; +} + /************************************************************************* * thinkpad-acpi driver attributes */ @@ -909,12 +1007,14 @@ static int __init thinkpad_acpi_driver_init(struct ibm_init_struct *iibm) thinkpad_id.ec_version_str : "unknown"); if (thinkpad_id.vendor && thinkpad_id.model_str) - printk(TPACPI_INFO "%s %s\n", + printk(TPACPI_INFO "%s %s, model %s\n", (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ? "IBM" : ((thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) ? "Lenovo" : "Unknown vendor"), - thinkpad_id.model_str); + thinkpad_id.model_str, + (thinkpad_id.nummodel_str) ? + thinkpad_id.nummodel_str : "unknown"); return 0; } @@ -1078,7 +1178,8 @@ static int hotkey_get_tablet_mode(int *status) if (!acpi_evalf(hkey_handle, &s, "MHKG", "d")) return -EIO; - return ((s & TP_HOTKEY_TABLET_MASK) != 0); + *status = ((s & TP_HOTKEY_TABLET_MASK) != 0); + return 0; } /* @@ -1106,6 +1207,19 @@ static int hotkey_mask_set(u32 mask) int rc = 0; if (tp_features.hotkey_mask) { + if (!tp_warned.hotkey_mask_ff && + (mask == 0xffff || mask == 0xffffff || + mask == 0xffffffff)) { + tp_warned.hotkey_mask_ff = 1; + printk(TPACPI_NOTICE + "setting the hotkey mask to 0x%08x is likely " + "not the best way to go about it\n", mask); + printk(TPACPI_NOTICE + "please consider using the driver defaults, " + "and refer to up-to-date thinkpad-acpi " + "documentation\n"); + } + HOTKEY_CONFIG_CRITICAL_START for (i = 0; i < 32; i++) { u32 m = 1 << i; @@ -1426,8 +1540,7 @@ static void hotkey_poll_setup(int may_warn) (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) { if (!tpacpi_hotkey_task) { tpacpi_hotkey_task = kthread_run(hotkey_kthread, - NULL, - TPACPI_FILE "d"); + NULL, TPACPI_NVRAM_KTHREAD_NAME); if (IS_ERR(tpacpi_hotkey_task)) { tpacpi_hotkey_task = NULL; printk(TPACPI_ERR @@ -1886,6 +1999,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ + /* These either have to go through ACPI video, or + * act like in the IBM ThinkPads, so don't ever + * enable them by default */ KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ KEY_RESERVED, /* 0x10: FN+END (brightness down) */ @@ -2090,6 +2206,32 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); } + /* Do not issue duplicate brightness change events to + * userspace */ + if (!tp_features.bright_acpimode) + /* update bright_acpimode... */ + tpacpi_check_std_acpi_brightness_support(); + + if (tp_features.bright_acpimode) { + printk(TPACPI_INFO + "This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + printk(TPACPI_NOTICE + "Disabling thinkpad-acpi brightness events " + "by default...\n"); + + /* The hotkey_reserved_mask change below is not + * necessary while the keys are at KEY_RESERVED in the + * default map, but better safe than sorry, leave it + * here as a marker of what we have to do, especially + * when we finally become able to set this at runtime + * on response to X.org requests */ + hotkey_reserved_mask |= + (1 << TP_ACPI_HOTKEYSCAN_FNHOME) + | (1 << TP_ACPI_HOTKEYSCAN_FNEND); + } + dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); res = hotkey_status_set(1); @@ -3109,13 +3251,82 @@ static struct ibm_struct video_driver_data = { TPACPI_HANDLE(lght, root, "\\LGHT"); /* A21e, A2xm/p, T20-22, X20-21 */ TPACPI_HANDLE(ledb, ec, "LEDB"); /* G4x */ +static int light_get_status(void) +{ + int status = 0; + + if (tp_features.light_status) { + if (!acpi_evalf(ec_handle, &status, "KBLT", "d")) + return -EIO; + return (!!status); + } + + return -ENXIO; +} + +static int light_set_status(int status) +{ + int rc; + + if (tp_features.light) { + if (cmos_handle) { + rc = acpi_evalf(cmos_handle, NULL, NULL, "vd", + (status)? + TP_CMOS_THINKLIGHT_ON : + TP_CMOS_THINKLIGHT_OFF); + } else { + rc = acpi_evalf(lght_handle, NULL, NULL, "vd", + (status)? 1 : 0); + } + return (rc)? 0 : -EIO; + } + + return -ENXIO; +} + +static void light_set_status_worker(struct work_struct *work) +{ + struct tpacpi_led_classdev *data = + container_of(work, struct tpacpi_led_classdev, work); + + if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) + light_set_status((data->new_brightness != LED_OFF)); +} + +static void light_sysfs_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct tpacpi_led_classdev *data = + container_of(led_cdev, + struct tpacpi_led_classdev, + led_classdev); + data->new_brightness = brightness; + queue_work(tpacpi_wq, &data->work); +} + +static enum led_brightness light_sysfs_get(struct led_classdev *led_cdev) +{ + return (light_get_status() == 1)? LED_FULL : LED_OFF; +} + +static struct tpacpi_led_classdev tpacpi_led_thinklight = { + .led_classdev = { + .name = "tpacpi::thinklight", + .brightness_set = &light_sysfs_set, + .brightness_get = &light_sysfs_get, + } +}; + static int __init light_init(struct ibm_init_struct *iibm) { + int rc = 0; + vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n"); TPACPI_ACPIHANDLE_INIT(ledb); TPACPI_ACPIHANDLE_INIT(lght); TPACPI_ACPIHANDLE_INIT(cmos); + INIT_WORK(&tpacpi_led_thinklight.work, light_set_status_worker); /* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */ tp_features.light = (cmos_handle || lght_handle) && !ledb_handle; @@ -3129,13 +3340,31 @@ static int __init light_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "light is %s\n", str_supported(tp_features.light)); - return (tp_features.light)? 0 : 1; + if (tp_features.light) { + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_led_thinklight.led_classdev); + } + + if (rc < 0) { + tp_features.light = 0; + tp_features.light_status = 0; + } else { + rc = (tp_features.light)? 0 : 1; + } + return rc; +} + +static void light_exit(void) +{ + led_classdev_unregister(&tpacpi_led_thinklight.led_classdev); + if (work_pending(&tpacpi_led_thinklight.work)) + flush_workqueue(tpacpi_wq); } static int light_read(char *p) { int len = 0; - int status = 0; + int status; if (!tp_features.light) { len += sprintf(p + len, "status:\t\tnot supported\n"); @@ -3143,8 +3372,9 @@ static int light_read(char *p) len += sprintf(p + len, "status:\t\tunknown\n"); len += sprintf(p + len, "commands:\ton, off\n"); } else { - if (!acpi_evalf(ec_handle, &status, "KBLT", "d")) - return -EIO; + status = light_get_status(); + if (status < 0) + return status; len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0)); len += sprintf(p + len, "commands:\ton, off\n"); } @@ -3154,37 +3384,29 @@ static int light_read(char *p) static int light_write(char *buf) { - int cmos_cmd, lght_cmd; char *cmd; - int success; + int newstatus = 0; if (!tp_features.light) return -ENODEV; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "on") == 0) { - cmos_cmd = 0x0c; - lght_cmd = 1; + newstatus = 1; } else if (strlencmp(cmd, "off") == 0) { - cmos_cmd = 0x0d; - lght_cmd = 0; + newstatus = 0; } else return -EINVAL; - - success = cmos_handle ? - acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) : - acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd); - if (!success) - return -EIO; } - return 0; + return light_set_status(newstatus); } static struct ibm_struct light_driver_data = { .name = "light", .read = light_read, .write = light_write, + .exit = light_exit, }; /************************************************************************* @@ -3582,6 +3804,12 @@ enum { /* For TPACPI_LED_OLD */ TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ }; +enum led_status_t { + TPACPI_LED_OFF = 0, + TPACPI_LED_ON, + TPACPI_LED_BLINK, +}; + static enum led_access_mode led_supported; TPACPI_HANDLE(led, ec, "SLED", /* 570 */ @@ -3590,8 +3818,174 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */ "LED", /* all others */ ); /* R30, R31 */ +#define TPACPI_LED_NUMLEDS 8 +static struct tpacpi_led_classdev *tpacpi_leds; +static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS]; +static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = { + /* there's a limit of 19 chars + NULL before 2.6.26 */ + "tpacpi::power", + "tpacpi:orange:batt", + "tpacpi:green:batt", + "tpacpi::dock_active", + "tpacpi::bay_active", + "tpacpi::dock_batt", + "tpacpi::unknown_led", + "tpacpi::standby", +}; + +static int led_get_status(unsigned int led) +{ + int status; + enum led_status_t led_s; + + switch (led_supported) { + case TPACPI_LED_570: + if (!acpi_evalf(ec_handle, + &status, "GLED", "dd", 1 << led)) + return -EIO; + led_s = (status == 0)? + TPACPI_LED_OFF : + ((status == 1)? + TPACPI_LED_ON : + TPACPI_LED_BLINK); + tpacpi_led_state_cache[led] = led_s; + return led_s; + default: + return -ENXIO; + } + + /* not reached */ +} + +static int led_set_status(unsigned int led, enum led_status_t ledstatus) +{ + /* off, on, blink. Index is led_status_t */ + static const int const led_sled_arg1[] = { 0, 1, 3 }; + static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ + static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ + static const int const led_led_arg1[] = { 0, 0x80, 0xc0 }; + + int rc = 0; + + switch (led_supported) { + case TPACPI_LED_570: + /* 570 */ + led = 1 << led; + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_sled_arg1[ledstatus])) + rc = -EIO; + break; + case TPACPI_LED_OLD: + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ + led = 1 << led; + rc = ec_write(TPACPI_LED_EC_HLMS, led); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLBL, + led * led_exp_hlbl[ledstatus]); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLCL, + led * led_exp_hlcl[ledstatus]); + break; + case TPACPI_LED_NEW: + /* all others */ + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_led_arg1[ledstatus])) + rc = -EIO; + break; + default: + rc = -ENXIO; + } + + if (!rc) + tpacpi_led_state_cache[led] = ledstatus; + + return rc; +} + +static void led_sysfs_set_status(unsigned int led, + enum led_brightness brightness) +{ + led_set_status(led, + (brightness == LED_OFF) ? + TPACPI_LED_OFF : + (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ? + TPACPI_LED_BLINK : TPACPI_LED_ON); +} + +static void led_set_status_worker(struct work_struct *work) +{ + struct tpacpi_led_classdev *data = + container_of(work, struct tpacpi_led_classdev, work); + + if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) + led_sysfs_set_status(data->led, data->new_brightness); +} + +static void led_sysfs_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + data->new_brightness = brightness; + queue_work(tpacpi_wq, &data->work); +} + +static int led_sysfs_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + /* Can we choose the flash rate? */ + if (*delay_on == 0 && *delay_off == 0) { + /* yes. set them to the hardware blink rate (1 Hz) */ + *delay_on = 500; /* ms */ + *delay_off = 500; /* ms */ + } else if ((*delay_on != 500) || (*delay_off != 500)) + return -EINVAL; + + data->new_brightness = TPACPI_LED_BLINK; + queue_work(tpacpi_wq, &data->work); + + return 0; +} + +static enum led_brightness led_sysfs_get(struct led_classdev *led_cdev) +{ + int rc; + + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + rc = led_get_status(data->led); + + if (rc == TPACPI_LED_OFF || rc < 0) + rc = LED_OFF; /* no error handling in led class :( */ + else + rc = LED_FULL; + + return rc; +} + +static void led_exit(void) +{ + unsigned int i; + + for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { + if (tpacpi_leds[i].led_classdev.name) + led_classdev_unregister(&tpacpi_leds[i].led_classdev); + } + + kfree(tpacpi_leds); + tpacpi_leds = NULL; +} + static int __init led_init(struct ibm_init_struct *iibm) { + unsigned int i; + int rc; + vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n"); TPACPI_ACPIHANDLE_INIT(led); @@ -3612,10 +4006,41 @@ static int __init led_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n", str_supported(led_supported), led_supported); + tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS, + GFP_KERNEL); + if (!tpacpi_leds) { + printk(TPACPI_ERR "Out of memory for LED data\n"); + return -ENOMEM; + } + + for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { + tpacpi_leds[i].led = i; + + tpacpi_leds[i].led_classdev.brightness_set = &led_sysfs_set; + tpacpi_leds[i].led_classdev.blink_set = &led_sysfs_blink_set; + if (led_supported == TPACPI_LED_570) + tpacpi_leds[i].led_classdev.brightness_get = + &led_sysfs_get; + + tpacpi_leds[i].led_classdev.name = tpacpi_led_names[i]; + + INIT_WORK(&tpacpi_leds[i].work, led_set_status_worker); + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_leds[i].led_classdev); + if (rc < 0) { + tpacpi_leds[i].led_classdev.name = NULL; + led_exit(); + return rc; + } + } + return (led_supported != TPACPI_LED_NONE)? 0 : 1; } -#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking")) +#define str_led_status(s) \ + ((s) == TPACPI_LED_OFF ? "off" : \ + ((s) == TPACPI_LED_ON ? "on" : "blinking")) static int led_read(char *p) { @@ -3631,11 +4056,11 @@ static int led_read(char *p) /* 570 */ int i, status; for (i = 0; i < 8; i++) { - if (!acpi_evalf(ec_handle, - &status, "GLED", "dd", 1 << i)) + status = led_get_status(i); + if (status < 0) return -EIO; len += sprintf(p + len, "%d:\t\t%s\n", - i, led_status(status)); + i, str_led_status(status)); } } @@ -3645,16 +4070,11 @@ static int led_read(char *p) return len; } -/* off, on, blink */ -static const int led_sled_arg1[] = { 0, 1, 3 }; -static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ -static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ -static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; - static int led_write(char *buf) { char *cmd; - int led, ind, ret; + int led, rc; + enum led_status_t s; if (!led_supported) return -ENODEV; @@ -3664,38 +4084,18 @@ static int led_write(char *buf) return -EINVAL; if (strstr(cmd, "off")) { - ind = 0; + s = TPACPI_LED_OFF; } else if (strstr(cmd, "on")) { - ind = 1; + s = TPACPI_LED_ON; } else if (strstr(cmd, "blink")) { - ind = 2; - } else - return -EINVAL; - - if (led_supported == TPACPI_LED_570) { - /* 570 */ - led = 1 << led; - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_sled_arg1[ind])) - return -EIO; - } else if (led_supported == TPACPI_LED_OLD) { - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - led = 1 << led; - ret = ec_write(TPACPI_LED_EC_HLMS, led); - if (ret >= 0) - ret = ec_write(TPACPI_LED_EC_HLBL, - led * led_exp_hlbl[ind]); - if (ret >= 0) - ret = ec_write(TPACPI_LED_EC_HLCL, - led * led_exp_hlcl[ind]); - if (ret < 0) - return ret; + s = TPACPI_LED_BLINK; } else { - /* all others */ - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_led_arg1[ind])) - return -EIO; + return -EINVAL; } + + rc = led_set_status(led, s); + if (rc < 0) + return rc; } return 0; @@ -3705,6 +4105,7 @@ static struct ibm_struct led_driver_data = { .name = "led", .read = led_read, .write = led_write, + .exit = led_exit, }; /************************************************************************* @@ -4169,8 +4570,16 @@ static struct ibm_struct ecdump_driver_data = { #define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen" +enum { + TP_EC_BACKLIGHT = 0x31, + + /* TP_EC_BACKLIGHT bitmasks */ + TP_EC_BACKLIGHT_LVLMSK = 0x1F, + TP_EC_BACKLIGHT_CMDMSK = 0xE0, + TP_EC_BACKLIGHT_MAPSW = 0x20, +}; + static struct backlight_device *ibm_backlight_device; -static int brightness_offset = 0x31; static int brightness_mode; static unsigned int brightness_enable = 2; /* 2 = auto, 0 = no, 1 = yes */ @@ -4179,16 +4588,24 @@ static struct mutex brightness_mutex; /* * ThinkPads can read brightness from two places: EC 0x31, or * CMOS NVRAM byte 0x5E, bits 0-3. + * + * EC 0x31 has the following layout + * Bit 7: unknown function + * Bit 6: unknown function + * Bit 5: Z: honour scale changes, NZ: ignore scale changes + * Bit 4: must be set to zero to avoid problems + * Bit 3-0: backlight brightness level + * + * brightness_get_raw returns status data in the EC 0x31 layout */ -static int brightness_get(struct backlight_device *bd) +static int brightness_get_raw(int *status) { u8 lec = 0, lcmos = 0, level = 0; if (brightness_mode & 1) { - if (!acpi_ec_read(brightness_offset, &lec)) + if (!acpi_ec_read(TP_EC_BACKLIGHT, &lec)) return -EIO; - lec &= (tp_features.bright_16levels)? 0x0f : 0x07; - level = lec; + level = lec & TP_EC_BACKLIGHT_LVLMSK; }; if (brightness_mode & 2) { lcmos = (nvram_read_byte(TP_NVRAM_ADDR_BRIGHTNESS) @@ -4198,16 +4615,27 @@ static int brightness_get(struct backlight_device *bd) level = lcmos; } - if (brightness_mode == 3 && lec != lcmos) { - printk(TPACPI_ERR - "CMOS NVRAM (%u) and EC (%u) do not agree " - "on display brightness level\n", - (unsigned int) lcmos, - (unsigned int) lec); - return -EIO; + if (brightness_mode == 3) { + *status = lec; /* Prefer EC, CMOS is just a backing store */ + lec &= TP_EC_BACKLIGHT_LVLMSK; + if (lec == lcmos) + tp_warned.bright_cmos_ec_unsync = 0; + else { + if (!tp_warned.bright_cmos_ec_unsync) { + printk(TPACPI_ERR + "CMOS NVRAM (%u) and EC (%u) do not " + "agree on display brightness level\n", + (unsigned int) lcmos, + (unsigned int) lec); + tp_warned.bright_cmos_ec_unsync = 1; + } + return -EIO; + } + } else { + *status = level; } - return level; + return 0; } /* May return EINTR which can always be mapped to ERESTARTSYS */ @@ -4215,19 +4643,22 @@ static int brightness_set(int value) { int cmos_cmd, inc, i, res; int current_value; + int command_bits; - if (value > ((tp_features.bright_16levels)? 15 : 7)) + if (value > ((tp_features.bright_16levels)? 15 : 7) || + value < 0) return -EINVAL; res = mutex_lock_interruptible(&brightness_mutex); if (res < 0) return res; - current_value = brightness_get(NULL); - if (current_value < 0) { - res = current_value; + res = brightness_get_raw(¤t_value); + if (res < 0) goto errout; - } + + command_bits = current_value & TP_EC_BACKLIGHT_CMDMSK; + current_value &= TP_EC_BACKLIGHT_LVLMSK; cmos_cmd = value > current_value ? TP_CMOS_BRIGHTNESS_UP : @@ -4242,7 +4673,8 @@ static int brightness_set(int value) goto errout; } if ((brightness_mode & 1) && - !acpi_ec_write(brightness_offset, i + inc)) { + !acpi_ec_write(TP_EC_BACKLIGHT, + (i + inc) | command_bits)) { res = -EIO; goto errout;; } @@ -4265,106 +4697,23 @@ static int brightness_update_status(struct backlight_device *bd) bd->props.brightness : 0); } -static struct backlight_ops ibm_backlight_data = { - .get_brightness = brightness_get, - .update_status = brightness_update_status, -}; - -/* --------------------------------------------------------------------- */ - -static int __init tpacpi_query_bcll_levels(acpi_handle handle) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - int rc; - - if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) { - obj = (union acpi_object *)buffer.pointer; - if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { - printk(TPACPI_ERR "Unknown BCLL data, " - "please report this to %s\n", TPACPI_MAIL); - rc = 0; - } else { - rc = obj->package.count; - } - } else { - return 0; - } - - kfree(buffer.pointer); - return rc; -} - -static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl, - void *context, void **rv) +static int brightness_get(struct backlight_device *bd) { - char name[ACPI_PATH_SEGMENT_LENGTH]; - struct acpi_buffer buffer = { sizeof(name), &name }; + int status, res; - if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && - !strncmp("BCLL", name, sizeof(name) - 1)) { - if (tpacpi_query_bcll_levels(handle) == 16) { - *rv = handle; - return AE_CTRL_TERMINATE; - } else { - return AE_OK; - } - } else { - return AE_OK; - } -} - -static int __init brightness_check_levels(void) -{ - int status; - void *found_node = NULL; - - if (!vid_handle) { - TPACPI_ACPIHANDLE_INIT(vid); - } - if (!vid_handle) - return 0; - - /* Search for a BCLL package with 16 levels */ - status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3, - brightness_find_bcll, NULL, - &found_node); - - return (ACPI_SUCCESS(status) && found_node != NULL); -} - -static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl, - void *context, void **rv) -{ - char name[ACPI_PATH_SEGMENT_LENGTH]; - struct acpi_buffer buffer = { sizeof(name), &name }; + res = brightness_get_raw(&status); + if (res < 0) + return 0; /* FIXME: teach backlight about error handling */ - if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) && - !strncmp("_BCL", name, sizeof(name) - 1)) { - *rv = handle; - return AE_CTRL_TERMINATE; - } else { - return AE_OK; - } + return status & TP_EC_BACKLIGHT_LVLMSK; } -static int __init brightness_check_std_acpi_support(void) -{ - int status; - void *found_node = NULL; - - if (!vid_handle) { - TPACPI_ACPIHANDLE_INIT(vid); - } - if (!vid_handle) - return 0; - - /* Search for a _BCL method, but don't execute it */ - status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3, - brightness_find_bcl, NULL, &found_node); +static struct backlight_ops ibm_backlight_data = { + .get_brightness = brightness_get, + .update_status = brightness_update_status, +}; - return (ACPI_SUCCESS(status) && found_node != NULL); -} +/* --------------------------------------------------------------------- */ static int __init brightness_init(struct ibm_init_struct *iibm) { @@ -4374,13 +4723,19 @@ static int __init brightness_init(struct ibm_init_struct *iibm) mutex_init(&brightness_mutex); - if (!brightness_enable) { - dbg_printk(TPACPI_DBG_INIT, - "brightness support disabled by " - "module parameter\n"); - return 1; - } else if (brightness_enable > 1) { - if (brightness_check_std_acpi_support()) { + /* + * We always attempt to detect acpi support, so as to switch + * Lenovo Vista BIOS to ACPI brightness mode even if we are not + * going to publish a backlight interface + */ + b = tpacpi_check_std_acpi_brightness_support(); + if (b > 0) { + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + printk(TPACPI_NOTICE + "Lenovo BIOS switched to ACPI backlight " + "control mode\n"); + } + if (brightness_enable > 1) { printk(TPACPI_NOTICE "standard ACPI backlight interface " "available, not loading native one...\n"); @@ -4388,6 +4743,22 @@ static int __init brightness_init(struct ibm_init_struct *iibm) } } + if (!brightness_enable) { + dbg_printk(TPACPI_DBG_INIT, + "brightness support disabled by " + "module parameter\n"); + return 1; + } + + if (b > 16) { + printk(TPACPI_ERR + "Unsupported brightness interface, " + "please contact %s\n", TPACPI_MAIL); + return 1; + } + if (b == 16) + tp_features.bright_16levels = 1; + if (!brightness_mode) { if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) brightness_mode = 2; @@ -4401,12 +4772,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (brightness_mode > 3) return -EINVAL; - tp_features.bright_16levels = - thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO && - brightness_check_levels(); - - b = brightness_get(NULL); - if (b < 0) + if (brightness_get_raw(&b) < 0) return 1; if (tp_features.bright_16levels) @@ -4424,7 +4790,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) ibm_backlight_device->props.max_brightness = (tp_features.bright_16levels)? 15 : 7; - ibm_backlight_device->props.brightness = b; + ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK; backlight_update_status(ibm_backlight_device); return 0; @@ -5045,11 +5411,11 @@ static void fan_watchdog_reset(void) if (fan_watchdog_maxinterval > 0 && tpacpi_lifecycle != TPACPI_LIFE_EXITING) { fan_watchdog_active = 1; - if (!schedule_delayed_work(&fan_watchdog_task, + if (!queue_delayed_work(tpacpi_wq, &fan_watchdog_task, msecs_to_jiffies(fan_watchdog_maxinterval * 1000))) { printk(TPACPI_ERR - "failed to schedule the fan watchdog, " + "failed to queue the fan watchdog, " "watchdog will not trigger\n"); } } else @@ -5419,7 +5785,7 @@ static void fan_exit(void) &driver_attr_fan_watchdog); cancel_delayed_work(&fan_watchdog_task); - flush_scheduled_work(); + flush_workqueue(tpacpi_wq); } static int fan_read(char *p) @@ -5825,10 +6191,13 @@ static void __init get_thinkpad_model_data(struct thinkpad_id_data *tp) tp->model_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_VERSION), GFP_KERNEL); - if (strnicmp(tp->model_str, "ThinkPad", 8) != 0) { + if (tp->model_str && strnicmp(tp->model_str, "ThinkPad", 8) != 0) { kfree(tp->model_str); tp->model_str = NULL; } + + tp->nummodel_str = kstrdup(dmi_get_system_info(DMI_PRODUCT_NAME), + GFP_KERNEL); } static int __init probe_for_thinkpad(void) @@ -6070,6 +6439,9 @@ static void thinkpad_acpi_module_exit(void) if (proc_dir) remove_proc_entry(TPACPI_PROC_DIR, acpi_root_dir); + if (tpacpi_wq) + destroy_workqueue(tpacpi_wq); + kfree(thinkpad_id.bios_version_str); kfree(thinkpad_id.ec_version_str); kfree(thinkpad_id.model_str); @@ -6100,6 +6472,12 @@ static int __init thinkpad_acpi_module_init(void) TPACPI_ACPIHANDLE_INIT(ecrd); TPACPI_ACPIHANDLE_INIT(ecwr); + tpacpi_wq = create_singlethread_workqueue(TPACPI_WORKQUEUE_NAME); + if (!tpacpi_wq) { + thinkpad_acpi_module_exit(); + return -ENOMEM; + } + proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir); if (!proc_dir) { printk(TPACPI_ERR @@ -6222,6 +6600,8 @@ static int __init thinkpad_acpi_module_init(void) /* Please remove this in year 2009 */ MODULE_ALIAS("ibm_acpi"); +MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); + /* * DMI matching for module autoloading * diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c index 63a089b..67503ea 100644 --- a/drivers/misc/tifm_7xx1.c +++ b/drivers/misc/tifm_7xx1.c @@ -368,6 +368,8 @@ static int tifm_7xx1_probe(struct pci_dev *dev, goto err_out_irq; writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1), + fm->addr + FM_CLEAR_INTERRUPT_ENABLE); + writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1), fm->addr + FM_SET_INTERRUPT_ENABLE); return 0; |
