diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/si476x-i2c.c | 886 |
1 files changed, 886 insertions, 0 deletions
diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c new file mode 100644 index 0000000..118c6b1 --- /dev/null +++ b/drivers/mfd/si476x-i2c.c @@ -0,0 +1,886 @@ +/* + * drivers/mfd/si476x-i2c.c -- Core device driver for si476x MFD + * device + * + * Copyright (C) 2012 Innovative Converged Devices(ICD) + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ +#include <linux/module.h> + +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <linux/i2c.h> +#include <linux/err.h> + +#include <linux/mfd/si476x-core.h> + +#define SI476X_MAX_IO_ERRORS 10 +#define SI476X_DRIVER_RDS_FIFO_DEPTH 128 + +/** + * si476x_core_config_pinmux() - pin function configuration function + * + * @core: Core device structure + * + * Configure the functions of the pins of the radio chip. + * + * The function returns zero in case of succes or negative error code + * otherwise. + */ +static int si476x_core_config_pinmux(struct si476x_core *core) +{ + int err; + dev_dbg(&core->client->dev, "Configuring pinmux\n"); + err = si476x_core_cmd_dig_audio_pin_cfg(core, + core->pinmux.dclk, + core->pinmux.dfs, + core->pinmux.dout, + core->pinmux.xout); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure digital audio pins(err = %d)\n", + err); + return err; + } + + err = si476x_core_cmd_zif_pin_cfg(core, + core->pinmux.iqclk, + core->pinmux.iqfs, + core->pinmux.iout, + core->pinmux.qout); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure ZIF pins(err = %d)\n", + err); + return err; + } + + err = si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(core, + core->pinmux.icin, + core->pinmux.icip, + core->pinmux.icon, + core->pinmux.icop); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure IC-Link/GPO pins(err = %d)\n", + err); + return err; + } + + err = si476x_core_cmd_ana_audio_pin_cfg(core, + core->pinmux.lrout); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure analog audio pins(err = %d)\n", + err); + return err; + } + + err = si476x_core_cmd_intb_pin_cfg(core, + core->pinmux.intb, + core->pinmux.a1); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure interrupt pins(err = %d)\n", + err); + return err; + } + + return 0; +} + +static inline void si476x_core_schedule_polling_work(struct si476x_core *core) +{ + schedule_delayed_work(&core->status_monitor, + usecs_to_jiffies(SI476X_STATUS_POLL_US)); +} + +/** + * si476x_core_start() - early chip startup function + * @core: Core device structure + * @soft: When set, this flag forces "soft" startup, where "soft" + * power down is the one done by sending appropriate command instead + * of using reset pin of the tuner + * + * Perform required startup sequence to correctly power + * up the chip and perform initial configuration. It does the + * following sequence of actions: + * 1. Claims and enables the power supplies VD and VIO1 required + * for I2C interface of the chip operation. + * 2. Waits for 100us, pulls the reset line up, enables irq, + * waits for another 100us as it is specified by the + * datasheet. + * 3. Sends 'POWER_UP' command to the device with all provided + * information about power-up parameters. + * 4. Configures, pin multiplexor, disables digital audio and + * configures interrupt sources. + * + * The function returns zero in case of succes or negative error code + * otherwise. + */ +int si476x_core_start(struct si476x_core *core, bool soft) +{ + struct i2c_client *client = core->client; + int err; + + if (!soft) { + if (gpio_is_valid(core->gpio_reset)) + gpio_set_value_cansleep(core->gpio_reset, 1); + + if (client->irq) + enable_irq(client->irq); + + udelay(100); + + if (!client->irq) { + atomic_set(&core->is_alive, 1); + si476x_core_schedule_polling_work(core); + } + } else { + if (client->irq) + enable_irq(client->irq); + else { + atomic_set(&core->is_alive, 1); + si476x_core_schedule_polling_work(core); + } + } + + err = si476x_core_cmd_power_up(core, + &core->power_up_parameters); + + if (err < 0) { + dev_err(&core->client->dev, + "Power up failure(err = %d)\n", + err); + goto disable_irq; + } + + if (client->irq) + atomic_set(&core->is_alive, 1); + + err = si476x_core_config_pinmux(core); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure pinmux(err = %d)\n", + err); + goto disable_irq; + } + + if (client->irq) { + err = regmap_write(core->regmap, + SI476X_PROP_INT_CTL_ENABLE, + SI476X_RDSIEN | + SI476X_STCIEN | + SI476X_CTSIEN); + if (err < 0) { + dev_err(&core->client->dev, + "Failed to configure interrupt sources" + "(err = %d)\n", err); + goto disable_irq; + } + } + + return 0; + +disable_irq: + if (err == -ENODEV) + atomic_set(&core->is_alive, 0); + + if (client->irq) + disable_irq(client->irq); + else + cancel_delayed_work_sync(&core->status_monitor); + + if (gpio_is_valid(core->gpio_reset)) + gpio_set_value_cansleep(core->gpio_reset, 0); + + return err; +} +EXPORT_SYMBOL_GPL(si476x_core_start); + +/** + * si476x_core_stop() - chip power-down function + * @core: Core device structure + * @soft: When set, function sends a POWER_DOWN command instead of + * bringing reset line low + * + * Power down the chip by performing following actions: + * 1. Disable IRQ or stop the polling worker + * 2. Send the POWER_DOWN command if the power down is soft or bring + * reset line low if not. + * + * The function returns zero in case of succes or negative error code + * otherwise. + */ +int si476x_core_stop(struct si476x_core *core, bool soft) +{ + int err = 0; + atomic_set(&core->is_alive, 0); + + if (soft) { + /* TODO: This probably shoud be a configurable option, + * so it is possible to have the chips keep their + * oscillators running + */ + struct si476x_power_down_args args = { + .xosc = false, + }; + err = si476x_core_cmd_power_down(core, &args); + } + + /* We couldn't disable those before + * 'si476x_core_cmd_power_down' since we expect to get CTS + * interrupt */ + if (core->client->irq) + disable_irq(core->client->irq); + else + cancel_delayed_work_sync(&core->status_monitor); + + if (!soft) { + if (gpio_is_valid(core->gpio_reset)) + gpio_set_value_cansleep(core->gpio_reset, 0); + } + return err; +} +EXPORT_SYMBOL_GPL(si476x_core_stop); + +/** + * si476x_core_set_power_state() - set the level at which the power is + * supplied for the chip. + * @core: Core device structure + * @next_state: enum si476x_power_state describing power state to + * switch to. + * + * Switch on all the required power supplies + * + * This function returns 0 in case of suvccess and negative error code + * otherwise. + */ +int si476x_core_set_power_state(struct si476x_core *core, + enum si476x_power_state next_state) +{ + /* + It is not clear form the datasheet if it is possible to + work with device if not all power domains are operational. + So for now the power-up policy is "power-up all the things!" + */ + int err = 0; + + if (core->power_state == SI476X_POWER_INCONSISTENT) { + dev_err(&core->client->dev, + "The device in inconsistent power state\n"); + return -EINVAL; + } + + if (next_state != core->power_state) { + switch (next_state) { + case SI476X_POWER_UP_FULL: + err = regulator_bulk_enable(ARRAY_SIZE(core->supplies), + core->supplies); + if (err < 0) { + core->power_state = SI476X_POWER_INCONSISTENT; + break; + } + /* + * Startup timing diagram recommends to have a + * 100 us delay between enabling of the power + * supplies and turning the tuner on. + */ + udelay(100); + + err = si476x_core_start(core, false); + if (err < 0) + goto disable_regulators; + + core->power_state = next_state; + break; + + case SI476X_POWER_DOWN: + core->power_state = next_state; + err = si476x_core_stop(core, false); + if (err < 0) + core->power_state = SI476X_POWER_INCONSISTENT; +disable_regulators: + err = regulator_bulk_disable(ARRAY_SIZE(core->supplies), + core->supplies); + if (err < 0) + core->power_state = SI476X_POWER_INCONSISTENT; + break; + default: + BUG(); + } + } + + return err; +} +EXPORT_SYMBOL_GPL(si476x_core_set_power_state); + +/** + * si476x_core_report_drainer_stop() - mark the completion of the RDS + * buffer drain porcess by the worker. + * + * @core: Core device structure + */ +static inline void si476x_core_report_drainer_stop(struct si476x_core *core) +{ + mutex_lock(&core->rds_drainer_status_lock); + core->rds_drainer_is_working = false; + mutex_unlock(&core->rds_drainer_status_lock); +} + +/** + * si476x_core_start_rds_drainer_once() - start RDS drainer worker if + * ther is none working, do nothing otherwise + * + * @core: Datastructure corresponding to the chip. + */ +static inline void si476x_core_start_rds_drainer_once(struct si476x_core *core) +{ + mutex_lock(&core->rds_drainer_status_lock); + if (!core->rds_drainer_is_working) { + core->rds_drainer_is_working = true; + schedule_work(&core->rds_fifo_drainer); + } + mutex_unlock(&core->rds_drainer_status_lock); +} +/** + * si476x_drain_rds_fifo() - RDS buffer drainer. + * @work: struct work_struct being ppassed to the function by the + * kernel. + * + * Drain the contents of the RDS FIFO of + */ +static void si476x_core_drain_rds_fifo(struct work_struct *work) +{ + int err; + + struct si476x_core *core = container_of(work, struct si476x_core, + rds_fifo_drainer); + + struct si476x_rds_status_report report; + + si476x_core_lock(core); + err = si476x_core_cmd_fm_rds_status(core, true, false, false, &report); + if (!err) { + int i = report.rdsfifoused; + dev_dbg(&core->client->dev, + "%d elements in RDS FIFO. Draining.\n", i); + for (; i > 0; --i) { + err = si476x_core_cmd_fm_rds_status(core, false, false, + (i == 1), &report); + if (err < 0) + goto unlock; + + kfifo_in(&core->rds_fifo, report.rds, + sizeof(report.rds)); + dev_dbg(&core->client->dev, "RDS data:\n %*ph\n", + sizeof(report.rds), report.rds); + } + dev_dbg(&core->client->dev, "Drrrrained!\n"); + wake_up_interruptible(&core->rds_read_queue); + } + +unlock: + si476x_core_unlock(core); + si476x_core_report_drainer_stop(core); +} + +/** + * si476x_core_pronounce_dead() + * + * @core: Core device structure + * + * Mark the device as being dead and wake up all potentially waiting + * threads of execution. + * + */ +static void si476x_core_pronounce_dead(struct si476x_core *core) +{ + dev_info(&core->client->dev, "Core device is dead.\n"); + + atomic_set(&core->is_alive, 0); + + /* Wake up al possible waiting processes */ + wake_up_interruptible(&core->rds_read_queue); + + atomic_set(&core->cts, 1); + wake_up(&core->command); + + atomic_set(&core->stc, 1); + wake_up(&core->tuning); +} + +/** + * si476x_core_i2c_xfer() + * + * @core: Core device structure + * @type: Transfer type + * @buf: Transfer buffer for/with data + * @count: Transfer buffer size + * + * Perfrom and I2C transfer(either read or write) and keep a counter + * of I/O errors. If the error counter rises above the threshold + * pronounce device dead. + * + * The function returns zero on succes or negative error code on + * failure. + */ +int si476x_core_i2c_xfer(struct si476x_core *core, + enum si476x_i2c_type type, + char *buf, int count) +{ + static int io_errors_count; + int err; + if (type == SI476X_I2C_SEND) + err = i2c_master_send(core->client, buf, count); + else + err = i2c_master_recv(core->client, buf, count); + + if (err < 0) { + if (io_errors_count++ > SI476X_MAX_IO_ERRORS) + si476x_core_pronounce_dead(core); + } else { + io_errors_count = 0; + } + + return err; +} +EXPORT_SYMBOL_GPL(si476x_core_i2c_xfer); + +/** + * si476x_get_status() + * @core: Core device structure + * + * Get the status byte of the core device by berforming one byte I2C + * read. + * + * The function returns a status value or a negative error code on + * error. + */ +static int si476x_core_get_status(struct si476x_core *core) +{ + u8 response; + int err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, + &response, sizeof(response)); + + return (err < 0) ? err : response; +} + +/** + * si476x_get_and_signal_status() - IRQ dispatcher + * @core: Core device structure + * + * Dispatch the arrived interrupt request based on the value of the + * status byte reported by the tuner. + * + */ +static void si476x_core_get_and_signal_status(struct si476x_core *core) +{ + int status = si476x_core_get_status(core); + if (status < 0) { + dev_err(&core->client->dev, "Failed to get status\n"); + return; + } + + if (status & SI476X_CTS) { + /* Unfortunately completions could not be used for + * signalling CTS since this flag cannot be cleared + * in status byte, and therefore once it becomes true + * multiple calls to 'complete' would cause the + * commands following the current one to be completed + * before they actually are */ + dev_dbg(&core->client->dev, "[interrupt] CTSINT\n"); + atomic_set(&core->cts, 1); + wake_up(&core->command); + } + + if (status & SI476X_FM_RDS_INT) { + dev_dbg(&core->client->dev, "[interrupt] RDSINT\n"); + si476x_core_start_rds_drainer_once(core); + } + + if (status & SI476X_STC_INT) { + dev_dbg(&core->client->dev, "[interrupt] STCINT\n"); + atomic_set(&core->stc, 1); + wake_up(&core->tuning); + } +} + +static void si476x_core_poll_loop(struct work_struct *work) +{ + struct si476x_core *core = SI476X_WORK_TO_CORE(work); + + si476x_core_get_and_signal_status(core); + + if (atomic_read(&core->is_alive)) + si476x_core_schedule_polling_work(core); +} + +static irqreturn_t si476x_core_interrupt(int irq, void *dev) +{ + struct si476x_core *core = dev; + + si476x_core_get_and_signal_status(core); + + return IRQ_HANDLED; +} + +/** + * si476x_firmware_version_to_revision() + * @core: Core device structure + * @major: Firmware major number + * @minor1: Firmware first minor number + * @minor2: Firmware second minor number + * + * Convert a chip's firmware version number into an offset that later + * will be used to as offset in "vtable" of tuner functions + * + * This function returns a positive offset in case of success and a -1 + * in case of failure. + */ +static int si476x_core_fwver_to_revision(struct si476x_core *core, + int func, int major, + int minor1, int minor2) +{ + switch (func) { + case SI476X_FUNC_FM_RECEIVER: + switch (major) { + case 5: + return SI476X_REVISION_A10; + case 8: + return SI476X_REVISION_A20; + case 10: + return SI476X_REVISION_A30; + default: + goto unknown_revision; + } + case SI476X_FUNC_AM_RECEIVER: + switch (major) { + case 5: + return SI476X_REVISION_A10; + case 7: + return SI476X_REVISION_A20; + case 9: + return SI476X_REVISION_A30; + default: + goto unknown_revision; + } + case SI476X_FUNC_WB_RECEIVER: + switch (major) { + case 3: + return SI476X_REVISION_A10; + case 5: + return SI476X_REVISION_A20; + case 7: + return SI476X_REVISION_A30; + default: + goto unknown_revision; + } + case SI476X_FUNC_BOOTLOADER: + default: /* FALLTHROUG */ + BUG(); + return -1; + } + +unknown_revision: + dev_err(&core->client->dev, + "Unsupported version of the firmware: %d.%d.%d, " + "reverting to A10 comptible functions\n", + major, minor1, minor2); + + return SI476X_REVISION_A10; +} + +/** + * si476x_get_revision_info() + * @core: Core device structure + * + * Get the firmware version number of the device. It is done in + * following three steps: + * 1. Power-up the device + * 2. Send the 'FUNC_INFO' command + * 3. Powering the device down. + * + * The function return zero on success and a negative error code on + * failure. + */ +static int si476x_core_get_revision_info(struct si476x_core *core) +{ + int rval; + struct si476x_func_info info; + + si476x_core_lock(core); + rval = si476x_core_set_power_state(core, SI476X_POWER_UP_FULL); + if (rval < 0) + goto exit; + + rval = si476x_core_cmd_func_info(core, &info); + if (rval < 0) + goto power_down; + + core->revision = si476x_core_fwver_to_revision(core, info.func, + info.firmware.major, + info.firmware.minor[0], + info.firmware.minor[1]); +power_down: + si476x_core_set_power_state(core, SI476X_POWER_DOWN); +exit: + si476x_core_unlock(core); + + return rval; +} + +bool si476x_core_has_am(struct si476x_core *core) +{ + return core->chip_id == SI476X_CHIP_SI4761 || + core->chip_id == SI476X_CHIP_SI4764; +} +EXPORT_SYMBOL_GPL(si476x_core_has_am); + +bool si476x_core_has_diversity(struct si476x_core *core) +{ + return core->chip_id == SI476X_CHIP_SI4764; +} +EXPORT_SYMBOL_GPL(si476x_core_has_diversity); + +bool si476x_core_is_a_secondary_tuner(struct si476x_core *core) +{ + return si476x_core_has_diversity(core) && + (core->diversity_mode == SI476X_PHDIV_SECONDARY_ANTENNA || + core->diversity_mode == SI476X_PHDIV_SECONDARY_COMBINING); +} +EXPORT_SYMBOL_GPL(si476x_core_is_a_secondary_tuner); + +bool si476x_core_is_a_primary_tuner(struct si476x_core *core) +{ + return si476x_core_has_diversity(core) && + (core->diversity_mode == SI476X_PHDIV_PRIMARY_ANTENNA || + core->diversity_mode == SI476X_PHDIV_PRIMARY_COMBINING); +} +EXPORT_SYMBOL_GPL(si476x_core_is_a_primary_tuner); + +bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core) +{ + return si476x_core_has_am(core) && + (core->power_up_parameters.func == SI476X_FUNC_AM_RECEIVER); +} +EXPORT_SYMBOL_GPL(si476x_core_is_in_am_receiver_mode); + +bool si476x_core_is_powered_up(struct si476x_core *core) +{ + return core->power_state == SI476X_POWER_UP_FULL; +} +EXPORT_SYMBOL_GPL(si476x_core_is_powered_up); + +static int si476x_core_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int rval; + struct si476x_core *core; + struct si476x_platform_data *pdata; + struct mfd_cell *cell; + int cell_num; + + core = devm_kzalloc(&client->dev, sizeof(*core), GFP_KERNEL); + if (!core) { + dev_err(&client->dev, + "failed to allocate 'struct si476x_core'\n"); + return -ENOMEM; + } + core->client = client; + + core->regmap = devm_regmap_init_si476x(core); + if (IS_ERR(core->regmap)) { + rval = PTR_ERR(core->regmap); + dev_err(&client->dev, + "Failed to allocate register map: %d\n", + rval); + return rval; + } + + i2c_set_clientdata(client, core); + + atomic_set(&core->is_alive, 0); + core->power_state = SI476X_POWER_DOWN; + + pdata = client->dev.platform_data; + if (pdata) { + memcpy(&core->power_up_parameters, + &pdata->power_up_parameters, + sizeof(core->power_up_parameters)); + + core->gpio_reset = -1; + if (gpio_is_valid(pdata->gpio_reset)) { + rval = gpio_request(pdata->gpio_reset, "si476x reset"); + if (rval) { + dev_err(&client->dev, + "Failed to request gpio: %d\n", rval); + return rval; + } + core->gpio_reset = pdata->gpio_reset; + gpio_direction_output(core->gpio_reset, 0); + } + + core->diversity_mode = pdata->diversity_mode; + memcpy(&core->pinmux, &pdata->pinmux, + sizeof(struct si476x_pinmux)); + } else { + dev_err(&client->dev, "No platform data provided\n"); + return -EINVAL; + } + + core->supplies[0].supply = "vd"; + core->supplies[1].supply = "va"; + core->supplies[2].supply = "vio1"; + core->supplies[3].supply = "vio2"; + + rval = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(core->supplies), + core->supplies); + if (rval) { + dev_err(&client->dev, "Failet to gett all of the regulators\n"); + goto free_gpio; + } + + mutex_init(&core->cmd_lock); + init_waitqueue_head(&core->command); + init_waitqueue_head(&core->tuning); + + rval = kfifo_alloc(&core->rds_fifo, + SI476X_DRIVER_RDS_FIFO_DEPTH * + sizeof(struct v4l2_rds_data), + GFP_KERNEL); + if (rval) { + dev_err(&client->dev, "Could not alloate the FIFO\n"); + goto free_gpio; + } + mutex_init(&core->rds_drainer_status_lock); + init_waitqueue_head(&core->rds_read_queue); + INIT_WORK(&core->rds_fifo_drainer, si476x_core_drain_rds_fifo); + + if (client->irq) { + rval = devm_request_threaded_irq(&client->dev, + client->irq, NULL, + si476x_core_interrupt, + IRQF_TRIGGER_FALLING, + client->name, core); + if (rval < 0) { + dev_err(&client->dev, "Could not request IRQ %d\n", + client->irq); + goto free_kfifo; + } + disable_irq(client->irq); + dev_dbg(&client->dev, "IRQ requested.\n"); + + core->rds_fifo_depth = 20; + } else { + INIT_DELAYED_WORK(&core->status_monitor, + si476x_core_poll_loop); + dev_info(&client->dev, + "No IRQ number specified, will use polling\n"); + + core->rds_fifo_depth = 5; + } + + core->chip_id = id->driver_data; + + rval = si476x_core_get_revision_info(core); + if (rval < 0) { + rval = -ENODEV; + goto free_kfifo; + } + + cell_num = 0; + + cell = &core->cells[SI476X_RADIO_CELL]; + cell->name = "si476x-radio"; + cell_num++; + +#ifdef CONFIG_SND_SOC_SI476X + if ((core->chip_id == SI476X_CHIP_SI4761 || + core->chip_id == SI476X_CHIP_SI4764) && + core->pinmux.dclk == SI476X_DCLK_DAUDIO && + core->pinmux.dfs == SI476X_DFS_DAUDIO && + core->pinmux.dout == SI476X_DOUT_I2S_OUTPUT && + core->pinmux.xout == SI476X_XOUT_TRISTATE) { + cell = &core->cells[SI476X_CODEC_CELL]; + cell->name = "si476x-codec"; + cell_num++; + } +#endif + rval = mfd_add_devices(&client->dev, + (client->adapter->nr << 8) + client->addr, + core->cells, cell_num, + NULL, 0, NULL); + if (!rval) + return 0; + +free_kfifo: + kfifo_free(&core->rds_fifo); + +free_gpio: + if (gpio_is_valid(core->gpio_reset)) + gpio_free(core->gpio_reset); + + return rval; +} + +static int si476x_core_remove(struct i2c_client *client) +{ + struct si476x_core *core = i2c_get_clientdata(client); + + si476x_core_pronounce_dead(core); + mfd_remove_devices(&client->dev); + + if (client->irq) + disable_irq(client->irq); + else + cancel_delayed_work_sync(&core->status_monitor); + + kfifo_free(&core->rds_fifo); + + if (gpio_is_valid(core->gpio_reset)) + gpio_free(core->gpio_reset); + + return 0; +} + + +static const struct i2c_device_id si476x_id[] = { + { "si4761", SI476X_CHIP_SI4761 }, + { "si4764", SI476X_CHIP_SI4764 }, + { "si4768", SI476X_CHIP_SI4768 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, si476x_id); + +static struct i2c_driver si476x_core_driver = { + .driver = { + .name = "si476x-core", + .owner = THIS_MODULE, + }, + .probe = si476x_core_probe, + .remove = si476x_core_remove, + .id_table = si476x_id, +}; +module_i2c_driver(si476x_core_driver); + + +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>"); +MODULE_DESCRIPTION("Si4761/64/68 AM/FM MFD core device driver"); +MODULE_LICENSE("GPL"); |
