diff options
Diffstat (limited to 'drivers/mfd')
| -rw-r--r-- | drivers/mfd/Kconfig | 42 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 6 | ||||
| -rw-r--r-- | drivers/mfd/ab3100-core.c | 68 | ||||
| -rw-r--r-- | drivers/mfd/ab3100-otp.c | 268 | ||||
| -rw-r--r-- | drivers/mfd/dm355evm_msp.c | 12 | ||||
| -rw-r--r-- | drivers/mfd/ezx-pcap.c | 106 | ||||
| -rw-r--r-- | drivers/mfd/mc13783-core.c | 427 | ||||
| -rw-r--r-- | drivers/mfd/mfd-core.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/pcf50633-adc.c | 32 | ||||
| -rw-r--r-- | drivers/mfd/pcf50633-core.c | 5 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-core.c | 112 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-irq.c | 2 | ||||
| -rw-r--r-- | drivers/mfd/twl4030-power.c | 472 | ||||
| -rw-r--r-- | drivers/mfd/ucb1400_core.c | 32 | ||||
| -rw-r--r-- | drivers/mfd/ucb1x00-core.c | 1 | ||||
| -rw-r--r-- | drivers/mfd/wm831x-core.c | 1549 | ||||
| -rw-r--r-- | drivers/mfd/wm831x-irq.c | 559 | ||||
| -rw-r--r-- | drivers/mfd/wm831x-otp.c | 83 | ||||
| -rw-r--r-- | drivers/mfd/wm8350-core.c | 27 |
19 files changed, 3657 insertions, 148 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 491ac0f..570be13 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -108,6 +108,19 @@ config TWL4030_CORE high speed USB OTG transceiver, an audio codec (on most versions) and many other features. +config TWL4030_POWER + bool "Support power resources on TWL4030 family chips" + depends on TWL4030_CORE && ARM + help + Say yes here if you want to use the power resources on the + TWL4030 family chips. Most of these resources are regulators, + which have a separate driver; some are control signals, such + as clock request handshaking. + + This driver uses board-specific data to initialize the resources + and load scripts controling which resources are switched off/on + or reset when a sleep, wakeup or warm reset event occurs. + config MFD_TMIO bool default n @@ -157,6 +170,16 @@ config MFD_WM8400 the device, additional drivers must be enabled in order to use the functionality of the device. +config MFD_WM831X + tristate "Support Wolfson Microelectronics WM831x PMICs" + select MFD_CORE + depends on I2C + help + Support for the Wolfson Microelecronics WM831x PMICs. This + driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config MFD_WM8350 tristate @@ -228,6 +251,16 @@ config MFD_PCF50633 facilities, and registers devices for the various functions so that function-specific drivers can bind to them. +config MFD_MC13783 + tristate "Support Freescale MC13783" + depends on SPI_MASTER + select MFD_CORE + help + Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config PCF50633_ADC tristate "Support for NXP PCF50633 ADC" depends on MFD_PCF50633 @@ -256,6 +289,15 @@ config AB3100_CORE LEDs, vibrator, system power and temperature, power management and ALSA sound. +config AB3100_OTP + tristate "ST-Ericsson AB3100 OTP functions" + depends on AB3100_CORE + default y if AB3100_CORE + help + Select this to enable the AB3100 Mixed Signal IC OTP (one-time + programmable memory) support. This exposes a sysfs file to read + out OTP values. + config EZX_PCAP bool "PCAP Support" depends on GENERIC_HARDIRQS && SPI_MASTER diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 6f8a9a1af..f3b277b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o +wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o +obj-$(CONFIG_MFD_WM831X) += wm831x.o wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o @@ -23,6 +25,9 @@ obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o +obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o + +obj-$(CONFIG_MFD_MC13783) += mc13783-core.o obj-$(CONFIG_MFD_CORE) += mfd-core.o @@ -44,3 +49,4 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o +obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 13e7d7b..6134810 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/workqueue.h> #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/uaccess.h> @@ -58,8 +57,6 @@ * The AB3100 is usually assigned address 0x48 (7-bit) * The chip is defined in the platform i2c_board_data section. */ -static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END }; -I2C_CLIENT_INSMOD_1(ab3100); u8 ab3100_get_chip_type(struct ab3100 *ab3100) { @@ -77,7 +74,7 @@ u8 ab3100_get_chip_type(struct ab3100 *ab3100) } EXPORT_SYMBOL(ab3100_get_chip_type); -int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) +int ab3100_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; int err; @@ -107,9 +104,10 @@ int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval) err = 0; } mutex_unlock(&ab3100->access_mutex); - return 0; + return err; } -EXPORT_SYMBOL(ab3100_set_register); +EXPORT_SYMBOL(ab3100_set_register_interruptible); + /* * The test registers exist at an I2C bus address up one @@ -118,7 +116,7 @@ EXPORT_SYMBOL(ab3100_set_register); * anyway. It's currently only used from this file so declare * it static and do not export. */ -static int ab3100_set_test_register(struct ab3100 *ab3100, +static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 regval) { u8 regandval[2] = {reg, regval}; @@ -148,7 +146,8 @@ static int ab3100_set_test_register(struct ab3100 *ab3100, return err; } -int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) + +int ab3100_get_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 *regval) { int err; @@ -202,9 +201,10 @@ int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval) mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register); +EXPORT_SYMBOL(ab3100_get_register_interruptible); -int ab3100_get_register_page(struct ab3100 *ab3100, + +int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, u8 first_reg, u8 *regvals, u8 numregs) { int err; @@ -258,9 +258,10 @@ int ab3100_get_register_page(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_get_register_page); +EXPORT_SYMBOL(ab3100_get_register_page_interruptible); + -int ab3100_mask_and_set_register(struct ab3100 *ab3100, +int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, u8 reg, u8 andmask, u8 ormask) { u8 regandval[2] = {reg, 0}; @@ -328,7 +329,8 @@ int ab3100_mask_and_set_register(struct ab3100 *ab3100, mutex_unlock(&ab3100->access_mutex); return err; } -EXPORT_SYMBOL(ab3100_mask_and_set_register); +EXPORT_SYMBOL(ab3100_mask_and_set_register_interruptible); + /* * Register a simple callback for handling any AB3100 events. @@ -371,7 +373,7 @@ static void ab3100_work(struct work_struct *work) u32 fatevent; int err; - err = ab3100_get_register_page(ab3100, AB3100_EVENTA1, + err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, event_regs, 3); if (err) goto err_event_wq; @@ -417,7 +419,7 @@ static irqreturn_t ab3100_irq_handler(int irq, void *data) * stuff and we will re-enable the interrupts once th * worker has finished. */ - disable_irq(ab3100->i2c_client->irq); + disable_irq_nosync(irq); schedule_work(&ab3100->work); return IRQ_HANDLED; } @@ -435,7 +437,7 @@ static int ab3100_registers_print(struct seq_file *s, void *p) seq_printf(s, "AB3100 registers:\n"); for (reg = 0; reg < 0xff; reg++) { - ab3100_get_register(ab3100, reg, &value); + ab3100_get_register_interruptible(ab3100, reg, &value); seq_printf(s, "[0x%x]: 0x%x\n", reg, value); } return 0; @@ -465,14 +467,14 @@ static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file) return 0; } -static int ab3100_get_set_reg(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) +static ssize_t ab3100_get_set_reg(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) { struct ab3100_get_set_reg_priv *priv = file->private_data; struct ab3100 *ab3100 = priv->ab3100; char buf[32]; - int buf_size; + ssize_t buf_size; int regp; unsigned long user_reg; int err; @@ -515,7 +517,7 @@ static int ab3100_get_set_reg(struct file *file, u8 reg = (u8) user_reg; u8 regvalue; - ab3100_get_register(ab3100, reg, ®value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug read AB3100 reg[0x%02x]: 0x%02x\n", @@ -547,8 +549,8 @@ static int ab3100_get_set_reg(struct file *file, return -EINVAL; value = (u8) user_value; - ab3100_set_register(ab3100, reg, value); - ab3100_get_register(ab3100, reg, ®value); + ab3100_set_register_interruptible(ab3100, reg, value); + ab3100_get_register_interruptible(ab3100, reg, ®value); dev_info(ab3100->dev, "debug write reg[0x%02x] with 0x%02x, " @@ -643,7 +645,7 @@ struct ab3100_init_setting { u8 setting; }; -static const struct ab3100_init_setting __initdata +static const struct ab3100_init_setting __initconst ab3100_init_settings[] = { { .abreg = AB3100_MCA, @@ -662,7 +664,7 @@ ab3100_init_settings[] = { .setting = 0x01 }, { .abreg = AB3100_IMRB1, - .setting = 0xFF + .setting = 0xBF }, { .abreg = AB3100_IMRB2, .setting = 0xFF @@ -696,7 +698,7 @@ static int __init ab3100_setup(struct ab3100 *ab3100) int i; for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) { - err = ab3100_set_register(ab3100, + err = ab3100_set_register_interruptible(ab3100, ab3100_init_settings[i].abreg, ab3100_init_settings[i].setting); if (err) @@ -705,14 +707,14 @@ static int __init ab3100_setup(struct ab3100 *ab3100) /* * Special trick to make the AB3100 use the 32kHz clock (RTC) - * bit 3 in test registe 0x02 is a special, undocumented test + * bit 3 in test register 0x02 is a special, undocumented test * register bit that only exist in AB3100 P1E */ if (ab3100->chip_id == 0xc4) { dev_warn(ab3100->dev, "AB3100 P1E variant detected, " "forcing chip to 32KHz\n"); - err = ab3100_set_test_register(ab3100, 0x02, 0x08); + err = ab3100_set_test_register_interruptible(ab3100, 0x02, 0x08); } exit_no_setup: @@ -833,6 +835,8 @@ static int __init ab3100_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct ab3100 *ab3100; + struct ab3100_platform_data *ab3100_plf_data = + client->dev.platform_data; int err; int i; @@ -852,8 +856,8 @@ static int __init ab3100_probe(struct i2c_client *client, i2c_set_clientdata(client, ab3100); /* Read chip ID register */ - err = ab3100_get_register(ab3100, AB3100_CID, - &ab3100->chip_id); + err = ab3100_get_register_interruptible(ab3100, AB3100_CID, + &ab3100->chip_id); if (err) { dev_err(&client->dev, "could not communicate with the AB3100 analog " @@ -916,6 +920,8 @@ static int __init ab3100_probe(struct i2c_client *client, for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) { ab3100_platform_devs[i]->dev.parent = &client->dev; + ab3100_platform_devs[i]->dev.platform_data = + ab3100_plf_data; platform_set_drvdata(ab3100_platform_devs[i], ab3100); } @@ -958,7 +964,7 @@ static int __exit ab3100_remove(struct i2c_client *client) } static const struct i2c_device_id ab3100_id[] = { - { "ab3100", ab3100 }, + { "ab3100", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ab3100_id); diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c new file mode 100644 index 0000000..0499b20 --- /dev/null +++ b/drivers/mfd/ab3100-otp.c @@ -0,0 +1,268 @@ +/* + * drivers/mfd/ab3100_otp.c + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Driver to read out OTP from the AB3100 Mixed-signal circuit + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mfd/ab3100.h> +#include <linux/debugfs.h> + +/* The OTP registers */ +#define AB3100_OTP0 0xb0 +#define AB3100_OTP1 0xb1 +#define AB3100_OTP2 0xb2 +#define AB3100_OTP3 0xb3 +#define AB3100_OTP4 0xb4 +#define AB3100_OTP5 0xb5 +#define AB3100_OTP6 0xb6 +#define AB3100_OTP7 0xb7 +#define AB3100_OTPP 0xbf + +/** + * struct ab3100_otp + * @dev containing device + * @ab3100 a pointer to the parent ab3100 device struct + * @locked whether the OTP is locked, after locking, no more bits + * can be changed but before locking it is still possible + * to change bits from 1->0. + * @freq clocking frequency for the OTP, this frequency is either + * 32768Hz or 1MHz/30 + * @paf product activation flag, indicates whether this is a real + * product (paf true) or a lab board etc (paf false) + * @imeich if this is set it is possible to override the + * IMEI number found in the tac, fac and svn fields with + * (secured) software + * @cid customer ID + * @tac type allocation code of the IMEI + * @fac final assembly code of the IMEI + * @svn software version number of the IMEI + * @debugfs a debugfs file used when dumping to file + */ +struct ab3100_otp { + struct device *dev; + struct ab3100 *ab3100; + bool locked; + u32 freq; + bool paf; + bool imeich; + u16 cid:14; + u32 tac:20; + u8 fac; + u32 svn:20; + struct dentry *debugfs; +}; + +static int __init ab3100_otp_read(struct ab3100_otp *otp) +{ + struct ab3100 *ab = otp->ab3100; + u8 otpval[8]; + u8 otpp; + int err; + + err = ab3100_get_register_interruptible(ab, AB3100_OTPP, &otpp); + if (err) { + dev_err(otp->dev, "unable to read OTPP register\n"); + return err; + } + + err = ab3100_get_register_page_interruptible(ab, AB3100_OTP0, + otpval, 8); + if (err) { + dev_err(otp->dev, "unable to read OTP register page\n"); + return err; + } + + /* Cache OTP properties, they never change by nature */ + otp->locked = (otpp & 0x80); + otp->freq = (otpp & 0x40) ? 32768 : 34100; + otp->paf = (otpval[1] & 0x80); + otp->imeich = (otpval[1] & 0x40); + otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff; + otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2]; + otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4); + otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4); + return 0; +} + +/* + * This is a simple debugfs human-readable file that dumps out + * the contents of the OTP. + */ +#ifdef CONFIG_DEBUGFS +static int show_otp(struct seq_file *s, void *v) +{ + struct ab3100_otp *otp = s->private; + int err; + + seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED"); + seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq); + seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET"); + seq_printf(s, "IMEI is %s\n", otp->imeich ? + "CHANGEABLE" : "NOT CHANGEABLE"); + seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid); + seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn); + return 0; +} + +static int ab3100_otp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab3100_otp_show, inode->i_private); +} + +static const struct file_operations ab3100_otp_operations = { + .open = ab3100_otp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO, + NULL, otp, + &ab3100_otp_operations); + if (!otp->debugfs) { + dev_err(dev, "AB3100 debugfs OTP file registration failed!\n"); + return err; + } +} + +static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ + debugfs_remove_file(otp->debugfs); +} +#else +/* Compile this out if debugfs not selected */ +static inline int __init ab3100_otp_init_debugfs(struct device *dev, + struct ab3100_otp *otp) +{ + return 0; +} + +static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) +{ +} +#endif + +#define SHOW_AB3100_ATTR(name) \ +static ssize_t ab3100_otp_##name##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{\ + struct ab3100_otp *otp = dev_get_drvdata(dev); \ + return sprintf(buf, "%u\n", otp->name); \ +} + +SHOW_AB3100_ATTR(locked) +SHOW_AB3100_ATTR(freq) +SHOW_AB3100_ATTR(paf) +SHOW_AB3100_ATTR(imeich) +SHOW_AB3100_ATTR(cid) +SHOW_AB3100_ATTR(fac) +SHOW_AB3100_ATTR(tac) +SHOW_AB3100_ATTR(svn) + +static struct device_attribute ab3100_otp_attrs[] = { + __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL), + __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL), + __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL), + __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL), + __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL), + __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL), + __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL), + __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL), +}; + +static int __init ab3100_otp_probe(struct platform_device *pdev) +{ + struct ab3100_otp *otp; + int err = 0; + int i; + + otp = kzalloc(sizeof(struct ab3100_otp), GFP_KERNEL); + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); + return -ENOMEM; + } + otp->dev = &pdev->dev; + + /* Replace platform data coming in with a local struct */ + otp->ab3100 = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, otp); + + err = ab3100_otp_read(otp); + if (err) + return err; + + dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); + + /* sysfs entries */ + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) { + err = device_create_file(&pdev->dev, + &ab3100_otp_attrs[i]); + if (err) + goto out_no_sysfs; + } + + /* debugfs entries */ + err = ab3100_otp_init_debugfs(&pdev->dev, otp); + if (err) + goto out_no_debugfs; + + return 0; + +out_no_sysfs: + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); +out_no_debugfs: + kfree(otp); + return err; +} + +static int __exit ab3100_otp_remove(struct platform_device *pdev) +{ + struct ab3100_otp *otp = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) + device_remove_file(&pdev->dev, + &ab3100_otp_attrs[i]); + ab3100_otp_exit_debugfs(otp); + kfree(otp); + return 0; +} + +static struct platform_driver ab3100_otp_driver = { + .driver = { + .name = "ab3100-otp", + .owner = THIS_MODULE, + }, + .remove = __exit_p(ab3100_otp_remove), +}; + +static int __init ab3100_otp_init(void) +{ + return platform_driver_probe(&ab3100_otp_driver, + ab3100_otp_probe); +} + +static void __exit ab3100_otp_exit(void) +{ + platform_driver_unregister(&ab3100_otp_driver); +} + +module_init(ab3100_otp_init); +module_exit(ab3100_otp_exit); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); +MODULE_DESCRIPTION("AB3100 OTP Readout Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c index 5b6e58a..3d4a861 100644 --- a/drivers/mfd/dm355evm_msp.c +++ b/drivers/mfd/dm355evm_msp.c @@ -107,8 +107,16 @@ static const u8 msp_gpios[] = { MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1), MSP_GPIO(4, SWITCH1), /* switches on MMC/SD sockets */ - MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */ - MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */ + /* + * Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be + * checked for card detection. However on the EVM bit 1 and 3 gives + * this status, for 0 and 1 instance respectively. The pdf also + * suggests that Bit 1 and 3 should be checked for write protection. + * However on the EVM bit 2 and 4 gives this status,for 0 and 1 + * instance respectively. + */ + MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */ + MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */ }; #define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3) diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index c1de4af..87628891 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/mfd/ezx-pcap.h> #include <linux/spi/spi.h> +#include <linux/gpio.h> #define PCAP_ADC_MAXQ 8 struct pcap_adc_request { @@ -106,11 +107,35 @@ int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value) } EXPORT_SYMBOL_GPL(ezx_pcap_read); +int ezx_pcap_set_bits(struct pcap_chip *pcap, u8 reg_num, u32 mask, u32 val) +{ + int ret; + u32 tmp = PCAP_REGISTER_READ_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + mutex_lock(&pcap->io_mutex); + ret = ezx_pcap_putget(pcap, &tmp); + if (ret) + goto out_unlock; + + tmp &= (PCAP_REGISTER_VALUE_MASK & ~mask); + tmp |= (val & mask) | PCAP_REGISTER_WRITE_OP_BIT | + (reg_num << PCAP_REGISTER_ADDRESS_SHIFT); + + ret = ezx_pcap_putget(pcap, &tmp); +out_unlock: + mutex_unlock(&pcap->io_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(ezx_pcap_set_bits); + /* IRQ */ -static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq) +int irq_to_pcap(struct pcap_chip *pcap, int irq) { - return 1 << (irq - pcap->irq_base); + return irq - pcap->irq_base; } +EXPORT_SYMBOL_GPL(irq_to_pcap); int pcap_to_irq(struct pcap_chip *pcap, int irq) { @@ -122,7 +147,7 @@ static void pcap_mask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr |= irq2pcap(pcap, irq); + pcap->msr |= 1 << irq_to_pcap(pcap, irq); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -130,7 +155,7 @@ static void pcap_unmask_irq(unsigned int irq) { struct pcap_chip *pcap = get_irq_chip_data(irq); - pcap->msr &= ~irq2pcap(pcap, irq); + pcap->msr &= ~(1 << irq_to_pcap(pcap, irq)); queue_work(pcap->workqueue, &pcap->msr_work); } @@ -154,34 +179,38 @@ static void pcap_isr_work(struct work_struct *work) u32 msr, isr, int_sel, service; int irq; - ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); - ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); + do { + ezx_pcap_read(pcap, PCAP_REG_MSR, &msr); + ezx_pcap_read(pcap, PCAP_REG_ISR, &isr); - /* We cant service/ack irqs that are assigned to port 2 */ - if (!(pdata->config & PCAP_SECOND_PORT)) { - ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); - isr &= ~int_sel; - } - ezx_pcap_write(pcap, PCAP_REG_ISR, isr); + /* We cant service/ack irqs that are assigned to port 2 */ + if (!(pdata->config & PCAP_SECOND_PORT)) { + ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel); + isr &= ~int_sel; + } - local_irq_disable(); - service = isr & ~msr; + ezx_pcap_write(pcap, PCAP_REG_MSR, isr | msr); + ezx_pcap_write(pcap, PCAP_REG_ISR, isr); - for (irq = pcap->irq_base; service; service >>= 1, irq++) { - if (service & 1) { - struct irq_desc *desc = irq_to_desc(irq); + local_irq_disable(); + service = isr & ~msr; + for (irq = pcap->irq_base; service; service >>= 1, irq++) { + if (service & 1) { + struct irq_desc *desc = irq_to_desc(irq); - if (WARN(!desc, KERN_WARNING - "Invalid PCAP IRQ %d\n", irq)) - break; + if (WARN(!desc, KERN_WARNING + "Invalid PCAP IRQ %d\n", irq)) + break; - if (desc->status & IRQ_DISABLED) - note_interrupt(irq, desc, IRQ_NONE); - else - desc->handle_irq(irq, desc); + if (desc->status & IRQ_DISABLED) + note_interrupt(irq, desc, IRQ_NONE); + else + desc->handle_irq(irq, desc); + } } - } - local_irq_enable(); + local_irq_enable(); + ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr); + } while (gpio_get_value(irq_to_gpio(pcap->spi->irq))); } static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -194,6 +223,19 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) } /* ADC */ +void pcap_set_ts_bits(struct pcap_chip *pcap, u32 bits) +{ + u32 tmp; + + mutex_lock(&pcap->adc_mutex); + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= ~(PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= bits & (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); +} +EXPORT_SYMBOL_GPL(pcap_set_ts_bits); + static void pcap_disable_adc(struct pcap_chip *pcap) { u32 tmp; @@ -216,15 +258,16 @@ static void pcap_adc_trigger(struct pcap_chip *pcap) mutex_unlock(&pcap->adc_mutex); return; } - mutex_unlock(&pcap->adc_mutex); - - /* start conversion on requested bank */ - tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; + /* start conversion on requested bank, save TS_M bits */ + ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp); + tmp &= (PCAP_ADC_TS_M_MASK | PCAP_ADC_TS_REF_LOWPWR); + tmp |= pcap->adc_queue[head]->flags | PCAP_ADC_ADEN; if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1) tmp |= PCAP_ADC_AD_SEL1; ezx_pcap_write(pcap, PCAP_REG_ADC, tmp); + mutex_unlock(&pcap->adc_mutex); ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC); } @@ -499,9 +542,10 @@ static void __exit ezx_pcap_exit(void) spi_unregister_driver(&ezxpcap_driver); } -module_init(ezx_pcap_init); +subsys_initcall(ezx_pcap_init); module_exit(ezx_pcap_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); MODULE_DESCRIPTION("Motorola PCAP2 ASIC Driver"); +MODULE_ALIAS("spi:ezx-pcap"); diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c new file mode 100644 index 0000000..e354d29 --- /dev/null +++ b/drivers/mfd/mc13783-core.c @@ -0,0 +1,427 @@ +/* + * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * This code is in parts based on wm8350-core.c and pcf50633-core.c + * + * Initial development of this code was funded by + * Phytec Messtechnik GmbH, http://www.phytec.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/mfd/mc13783-private.h> +#include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/spi/spi.h> +#include <linux/uaccess.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/irq.h> + +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_FRAME_MASK 0x00ffffff +#define MC13783_MAX_REG_NUM 0x3f +#define MC13783_REG_NUM_SHIFT 0x19 +#define MC13783_WRITE_BIT_SHIFT 31 + +static inline int spi_rw(struct spi_device *spi, u8 * buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = (const void *)buf, + .rx_buf = buf, + .len = len, + .cs_change = 0, + .delay_usecs = 0, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + if (spi_sync(spi, &m) != 0 || m.status != 0) + return -EINVAL; + return len - m.actual_length; +} + +static int mc13783_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + unsigned int frame = 0; + int ret = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= reg_num << MC13783_REG_NUM_SHIFT; + + ret = spi_rw(mc13783->spi_device, (u8 *)&frame, 4); + + *reg_val = frame & MC13783_FRAME_MASK; + + return ret; +} + +static int mc13783_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + unsigned int frame = 0; + + if (reg_num > MC13783_MAX_REG_NUM) + return -EINVAL; + + frame |= (1 << MC13783_WRITE_BIT_SHIFT); + frame |= reg_num << MC13783_REG_NUM_SHIFT; + frame |= reg_val & MC13783_FRAME_MASK; + + return spi_rw(mc13783->spi_device, (u8 *)&frame, 4); +} + +int mc13783_reg_read(struct mc13783 *mc13783, int reg_num, u32 *reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_read(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_read); + +int mc13783_reg_write(struct mc13783 *mc13783, int reg_num, u32 reg_val) +{ + int ret; + + mutex_lock(&mc13783->io_lock); + ret = mc13783_write(mc13783, reg_num, reg_val); + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_reg_write); + +/** + * mc13783_set_bits - Bitmask write + * + * @mc13783: Pointer to mc13783 control structure + * @reg: Register to access + * @mask: Mask of bits to change + * @val: Value to set for masked bits + */ +int mc13783_set_bits(struct mc13783 *mc13783, int reg, u32 mask, u32 val) +{ + u32 tmp; + int ret; + + mutex_lock(&mc13783->io_lock); + + ret = mc13783_read(mc13783, reg, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) + ret = mc13783_write(mc13783, reg, tmp); + + mutex_unlock(&mc13783->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mc13783_set_bits); + +int mc13783_register_irq(struct mc13783 *mc13783, int irq, + void (*handler) (int, void *), void *data) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ || !handler) + return -EINVAL; + + if (WARN_ON(mc13783->irq_handler[irq].handler)) + return -EBUSY; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = handler; + mc13783->irq_handler[irq].data = data; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_register_irq); + +int mc13783_free_irq(struct mc13783 *mc13783, int irq) +{ + if (irq < 0 || irq > MC13783_NUM_IRQ) + return -EINVAL; + + mutex_lock(&mc13783->io_lock); + mc13783->irq_handler[irq].handler = NULL; + mutex_unlock(&mc13783->io_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_free_irq); + +static void mc13783_irq_work(struct work_struct *work) +{ + struct mc13783 *mc13783 = container_of(work, struct mc13783, work); + int i; + unsigned int adc_sts; + + /* check if the adc has finished any completion */ + mc13783_reg_read(mc13783, MC13783_REG_INTERRUPT_STATUS_0, &adc_sts); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, + adc_sts & MC13783_INT_STAT_ADCDONEI); + + if (adc_sts & MC13783_INT_STAT_ADCDONEI) + complete_all(&mc13783->adc_done); + + for (i = 0; i < MC13783_NUM_IRQ; i++) + if (mc13783->irq_handler[i].handler) + mc13783->irq_handler[i].handler(i, + mc13783->irq_handler[i].data); + enable_irq(mc13783->irq); +} + +static irqreturn_t mc13783_interrupt(int irq, void *dev_id) +{ + struct mc13783 *mc13783 = dev_id; + + disable_irq_nosync(irq); + + schedule_work(&mc13783->work); + return IRQ_HANDLED; +} + +/* set adc to ts interrupt mode, which generates touchscreen wakeup interrupt */ +static inline void mc13783_adc_set_ts_irq_mode(struct mc13783 *mc13783) +{ + unsigned int reg_adc0, reg_adc1; + + reg_adc0 = MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0; + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN; + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); +} + +int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, + unsigned int channel, unsigned int *sample) +{ + unsigned int reg_adc0, reg_adc1; + int i; + + mutex_lock(&mc13783->adc_conv_lock); + + /* set up auto incrementing anyway to make quick read */ + reg_adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2; + /* enable the adc, ignore external triggering and set ASC to trigger + * conversion */ + reg_adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN + | MC13783_ADC1_ASC; + + /* setup channel number */ + if (channel > 7) + reg_adc1 |= MC13783_ADC1_ADSEL; + + switch (mode) { + case MC13783_ADC_MODE_TS: + /* enables touch screen reference mode and set touchscreen mode + * to position mode */ + reg_adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_ADREFMODE + | MC13783_ADC0_TSMOD0 | MC13783_ADC0_TSMOD1; + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + case MC13783_ADC_MODE_SINGLE_CHAN: + reg_adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT; + reg_adc1 |= MC13783_ADC1_RAND; + break; + case MC13783_ADC_MODE_MULT_CHAN: + reg_adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT; + break; + default: + return -EINVAL; + } + + mc13783_reg_write(mc13783, MC13783_REG_ADC_0, reg_adc0); + mc13783_reg_write(mc13783, MC13783_REG_ADC_1, reg_adc1); + + wait_for_completion_interruptible(&mc13783->adc_done); + + for (i = 0; i < 4; i++) + mc13783_reg_read(mc13783, MC13783_REG_ADC_2, &sample[i]); + + if (mc13783->ts_active) + mc13783_adc_set_ts_irq_mode(mc13783); + + mutex_unlock(&mc13783->adc_conv_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion); + +void mc13783_adc_set_ts_status(struct mc13783 *mc13783, unsigned int status) +{ + mc13783->ts_active = status; +} +EXPORT_SYMBOL_GPL(mc13783_adc_set_ts_status); + +static int mc13783_check_revision(struct mc13783 *mc13783) +{ + u32 rev_id, rev1, rev2, finid, icid; + + mc13783_read(mc13783, MC13783_REG_REVISION, &rev_id); + + rev1 = (rev_id & 0x018) >> 3; + rev2 = (rev_id & 0x007); + icid = (rev_id & 0x01C0) >> 6; + finid = (rev_id & 0x01E00) >> 9; + + /* Ver 0.2 is actually 3.2a. Report as 3.2 */ + if ((rev1 == 0) && (rev2 == 2)) + rev1 = 3; + + if (rev1 == 0 || icid != 2) { + dev_err(mc13783->dev, "No MC13783 detected.\n"); + return -ENODEV; + } + + mc13783->revision = ((rev1 * 10) + rev2); + dev_info(mc13783->dev, "MC13783 Rev %d.%d FinVer %x detected\n", rev1, + rev2, finid); + + return 0; +} + +/* + * Register a client device. This is non-fatal since there is no need to + * fail the entire device init due to a single platform device failing. + */ +static void mc13783_client_dev_register(struct mc13783 *mc13783, + const char *name) +{ + struct mfd_cell cell = {}; + + cell.name = name; + + mfd_add_devices(mc13783->dev, -1, &cell, 1, NULL, 0); +} + +static int __devinit mc13783_probe(struct spi_device *spi) +{ + struct mc13783 *mc13783; + struct mc13783_platform_data *pdata = spi->dev.platform_data; + int ret; + + mc13783 = kzalloc(sizeof(struct mc13783), GFP_KERNEL); + if (!mc13783) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, mc13783); + spi->mode = SPI_MODE_0 | SPI_CS_HIGH; + spi->bits_per_word = 32; + spi_setup(spi); + + mc13783->spi_device = spi; + mc13783->dev = &spi->dev; + mc13783->irq = spi->irq; + + INIT_WORK(&mc13783->work, mc13783_irq_work); + mutex_init(&mc13783->io_lock); + mutex_init(&mc13783->adc_conv_lock); + init_completion(&mc13783->adc_done); + + if (pdata) { + mc13783->flags = pdata->flags; + mc13783->regulators = pdata->regulators; + mc13783->num_regulators = pdata->num_regulators; + } + + if (mc13783_check_revision(mc13783)) { + ret = -ENODEV; + goto err_out; + } + + /* clear and mask all interrupts */ + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_0, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_STATUS_1, 0x00ffffff); + mc13783_reg_write(mc13783, MC13783_REG_INTERRUPT_MASK_1, 0x00ffffff); + + /* unmask adcdone interrupts */ + mc13783_set_bits(mc13783, MC13783_REG_INTERRUPT_MASK_0, + MC13783_INT_MASK_ADCDONEM, 0); + + ret = request_irq(mc13783->irq, mc13783_interrupt, + IRQF_DISABLED | IRQF_TRIGGER_HIGH, "mc13783", + mc13783); + if (ret) + goto err_out; + + if (mc13783->flags & MC13783_USE_CODEC) + mc13783_client_dev_register(mc13783, "mc13783-codec"); + if (mc13783->flags & MC13783_USE_ADC) + mc13783_client_dev_register(mc13783, "mc13783-adc"); + if (mc13783->flags & MC13783_USE_RTC) + mc13783_client_dev_register(mc13783, "mc13783-rtc"); + if (mc13783->flags & MC13783_USE_REGULATOR) + mc13783_client_dev_register(mc13783, "mc13783-regulator"); + if (mc13783->flags & MC13783_USE_TOUCHSCREEN) + mc13783_client_dev_register(mc13783, "mc13783-ts"); + + return 0; + +err_out: + kfree(mc13783); + return ret; +} + +static int __devexit mc13783_remove(struct spi_device *spi) +{ + struct mc13783 *mc13783; + + mc13783 = dev_get_drvdata(&spi->dev); + + free_irq(mc13783->irq, mc13783); + + mfd_remove_devices(&spi->dev); + + return 0; +} + +static struct spi_driver pmic_driver = { + .driver = { + .name = "mc13783", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = mc13783_probe, + .remove = __devexit_p(mc13783_remove), +}; + +static int __init pmic_init(void) +{ + return spi_register_driver(&pmic_driver); +} +subsys_initcall(pmic_init); + +static void __exit pmic_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_exit); + +MODULE_DESCRIPTION("Core/Protocol driver for Freescale MC13783 PMIC"); +MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 54ddf37..ae15e49 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id, int ret = -ENOMEM; int r; - pdev = platform_device_alloc(cell->name, id); + pdev = platform_device_alloc(cell->name, id + cell->id); if (!pdev) goto fail_alloc; diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c index c2d05be..3d31e97 100644 --- a/drivers/mfd/pcf50633-adc.c +++ b/drivers/mfd/pcf50633-adc.c @@ -73,15 +73,10 @@ static void trigger_next_adc_job_if_any(struct pcf50633 *pcf) struct pcf50633_adc *adc = __to_adc(pcf); int head; - mutex_lock(&adc->queue_mutex); - head = adc->queue_head; - if (!adc->queue[head]) { - mutex_unlock(&adc->queue_mutex); + if (!adc->queue[head]) return; - } - mutex_unlock(&adc->queue_mutex); adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg); } @@ -99,16 +94,17 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req) if (adc->queue[tail]) { mutex_unlock(&adc->queue_mutex); + dev_err(pcf->dev, "ADC queue is full, dropping request\n"); return -EBUSY; } adc->queue[tail] = req; + if (head == tail) + trigger_next_adc_job_if_any(pcf); adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); mutex_unlock(&adc->queue_mutex); - trigger_next_adc_job_if_any(pcf); - return 0; } @@ -124,6 +120,7 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result) int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) { struct pcf50633_adc_request *req; + int err; /* req is freed when the result is ready, in interrupt handler */ req = kzalloc(sizeof(*req), GFP_KERNEL); @@ -136,9 +133,13 @@ int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) req->callback_param = req; init_completion(&req->completion); - adc_enqueue_request(pcf, req); + err = adc_enqueue_request(pcf, req); + if (err) + return err; + wait_for_completion(&req->completion); + /* FIXME by this time req might be already freed */ return req->result; } EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read); @@ -159,9 +160,7 @@ int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg, req->callback = callback; req->callback_param = callback_param; - adc_enqueue_request(pcf, req); - - return 0; + return adc_enqueue_request(pcf, req); } EXPORT_SYMBOL_GPL(pcf50633_adc_async_read); @@ -184,7 +183,7 @@ static void pcf50633_adc_irq(int irq, void *data) struct pcf50633_adc *adc = data; struct pcf50633 *pcf = adc->pcf; struct pcf50633_adc_request *req; - int head; + int head, res; mutex_lock(&adc->queue_mutex); head = adc->queue_head; @@ -199,12 +198,13 @@ static void pcf50633_adc_irq(int irq, void *data) adc->queue_head = (head + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1); + res = adc_result(pcf); + trigger_next_adc_job_if_any(pcf); + mutex_unlock(&adc->queue_mutex); - req->callback(pcf, req->callback_param, adc_result(pcf)); + req->callback(pcf, req->callback_param, res); kfree(req); - - trigger_next_adc_job_if_any(pcf); } static int __devinit pcf50633_adc_probe(struct platform_device *pdev) diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 8d3c38b..d26d774 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -444,7 +444,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) get_device(pcf->dev); disable_irq_nosync(pcf->irq); - schedule_work(&pcf->irq_work); + queue_work(pcf->work_queue, &pcf->irq_work); return IRQ_HANDLED; } @@ -575,6 +575,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, pcf->dev = &client->dev; pcf->i2c_client = client; pcf->irq = client->irq; + pcf->work_queue = create_singlethread_workqueue("pcf50633"); INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); @@ -651,6 +652,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client, return 0; err: + destroy_workqueue(pcf->work_queue); kfree(pcf); return ret; } @@ -661,6 +663,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) int i; free_irq(pcf->irq, pcf); + destroy_workqueue(pcf->work_queue); platform_device_unregister(pcf->input_pdev); platform_device_unregister(pcf->rtc_pdev); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index ca54996..e832e97 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -89,6 +89,12 @@ #define twl_has_madc() false #endif +#ifdef CONFIG_TWL4030_POWER +#define twl_has_power() true +#else +#define twl_has_power() false +#endif + #if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE) #define twl_has_rtc() true #else @@ -115,6 +121,12 @@ #define TWL4030_NUM_SLAVES 4 +#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \ + || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE) +#define twl_has_pwrbutton() true +#else +#define twl_has_pwrbutton() false +#endif /* Base Address defns for twl4030_map[] */ @@ -468,7 +480,6 @@ static int add_children(struct twl4030_platform_data *pdata, unsigned long features) { struct device *child; - struct device *usb_transceiver = NULL; if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) { child = add_child(3, "twl4030_bci", @@ -520,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) } if (twl_has_usb() && pdata->usb) { + + static struct regulator_consumer_supply usb1v5 = { + .supply = "usb1v5", + }; + static struct regulator_consumer_supply usb1v8 = { + .supply = "usb1v8", + }; + static struct regulator_consumer_supply usb3v1 = { + .supply = "usb3v1", + }; + + /* First add the regulators so that they can be used by transceiver */ + if (twl_has_regulator()) { + /* this is a template that gets copied */ + struct regulator_init_data usb_fixed = { + .constraints.valid_modes_mask = + REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .constraints.valid_ops_mask = + REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }; + + child = add_regulator_linked(TWL4030_REG_VUSB1V5, + &usb_fixed, &usb1v5, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB1V8, + &usb_fixed, &usb1v8, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB3V1, + &usb_fixed, &usb3v1, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + } + child = add_child(0, "twl4030_usb", pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ pdata->irq_base + 8 + 2, pdata->irq_base + 4); + if (IS_ERR(child)) return PTR_ERR(child); /* we need to connect regulators to this transceiver */ - usb_transceiver = child; + if (twl_has_regulator() && child) { + usb1v5.dev = child; + usb1v8.dev = child; + usb3v1.dev = child; + } } if (twl_has_watchdog()) { @@ -538,6 +594,13 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } + if (twl_has_pwrbutton()) { + child = add_child(1, "twl4030_pwrbutton", + NULL, 0, true, pdata->irq_base + 8 + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + if (twl_has_regulator()) { /* child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); @@ -561,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_regulator() && usb_transceiver) { - static struct regulator_consumer_supply usb1v5 = { - .supply = "usb1v5", - }; - static struct regulator_consumer_supply usb1v8 = { - .supply = "usb1v8", - }; - static struct regulator_consumer_supply usb3v1 = { - .supply = "usb3v1", - }; - - /* this is a template that gets copied */ - struct regulator_init_data usb_fixed = { - .constraints.valid_modes_mask = - REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .constraints.valid_ops_mask = - REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }; - - usb1v5.dev = usb_transceiver; - usb1v8.dev = usb_transceiver; - usb3v1.dev = usb_transceiver; - - child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed, - &usb1v5, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed, - &usb1v8, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed, - &usb3v1, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - } - /* maybe add LDOs that are omitted on cost-reduced parts */ if (twl_has_regulator() && !(features & TPS_SUBSET)) { child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); @@ -788,6 +810,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) /* setup clock framework */ clocks_init(&client->dev); + /* load power event scripts */ + if (twl_has_power() && pdata->power) + twl4030_power_init(pdata->power); + /* Maybe init the T2 Interrupt subsystem */ if (client->irq && pdata->irq_base diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 7d43083..fb194fe 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -424,7 +424,7 @@ static void twl4030_sih_do_edge(struct work_struct *work) /* see what work we have */ spin_lock_irq(&sih_agent_lock); edge_change = agent->edge_change; - agent->edge_change = 0;; + agent->edge_change = 0; sih = edge_change ? agent->sih : NULL; spin_unlock_irq(&sih_agent_lock); if (!sih) diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c new file mode 100644 index 0000000..d423e0c --- /dev/null +++ b/drivers/mfd/twl4030-power.c @@ -0,0 +1,472 @@ +/* + * linux/drivers/i2c/chips/twl4030-power.c + * + * Handle TWL4030 Power initialization + * + * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2006 Texas Instruments, Inc + * + * Written by Kalle Jokiniemi + * Peter De Schrijver <peter.de-schrijver@nokia.com> + * Several fixes by Amit Kucheria <amit.kucheria@verdurent.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/i2c/twl4030.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +static u8 twl4030_start_script_address = 0x2b; + +#define PWR_P1_SW_EVENTS 0x10 +#define PWR_DEVOFF (1<<0) + +#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) +#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b) + +/* resource - hfclk */ +#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6) + +/* PM events */ +#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46) +#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47) +#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48) +#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36) +#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37) +#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38) + +#define LVL_WAKEUP 0x08 + +#define ENABLE_WARMRESET (1<<4) + +#define END_OF_SCRIPT 0x3f + +#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55) +#define R_SEQ_ADD_S2A12 PHY_TO_OFF_PM_MASTER(0x56) +#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57) +#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58) +#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59) +#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a) + +#define R_PROTECT_KEY 0x0E +#define R_KEY_1 0xC0 +#define R_KEY_2 0x0C + +/* resource configuration registers */ + +#define DEVGROUP_OFFSET 0 +#define TYPE_OFFSET 1 + +/* Bit positions */ +#define DEVGROUP_SHIFT 5 +#define DEVGROUP_MASK (7 << DEVGROUP_SHIFT) +#define TYPE_SHIFT 0 +#define TYPE_MASK (7 << TYPE_SHIFT) +#define TYPE2_SHIFT 3 +#define TYPE2_MASK (3 << TYPE2_SHIFT) + +static u8 res_config_addrs[] = { + [RES_VAUX1] = 0x17, + [RES_VAUX2] = 0x1b, + [RES_VAUX3] = 0x1f, + [RES_VAUX4] = 0x23, + [RES_VMMC1] = 0x27, + [RES_VMMC2] = 0x2b, + [RES_VPLL1] = 0x2f, + [RES_VPLL2] = 0x33, + [RES_VSIM] = 0x37, + [RES_VDAC] = 0x3b, + [RES_VINTANA1] = 0x3f, + [RES_VINTANA2] = 0x43, + [RES_VINTDIG] = 0x47, + [RES_VIO] = 0x4b, + [RES_VDD1] = 0x55, + [RES_VDD2] = 0x63, + [RES_VUSB_1V5] = 0x71, + [RES_VUSB_1V8] = 0x74, + [RES_VUSB_3V1] = 0x77, + [RES_VUSBCP] = 0x7a, + [RES_REGEN] = 0x7f, + [RES_NRES_PWRON] = 0x82, + [RES_CLKEN] = 0x85, + [RES_SYSEN] = 0x88, + [RES_HFCLKOUT] = 0x8b, + [RES_32KCLKOUT] = 0x8e, + [RES_RESET] = 0x91, + [RES_Main_Ref] = 0x94, +}; + +static int __init twl4030_write_script_byte(u8 address, u8 byte) +{ + int err; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_MEMORY_ADDRESS); + if (err) + goto out; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte, + R_MEMORY_DATA); +out: + return err; +} + +static int __init twl4030_write_script_ins(u8 address, u16 pmb_message, + u8 delay, u8 next) +{ + int err; + + address *= 4; + err = twl4030_write_script_byte(address++, pmb_message >> 8); + if (err) + goto out; + err = twl4030_write_script_byte(address++, pmb_message & 0xff); + if (err) + goto out; + err = twl4030_write_script_byte(address++, delay); + if (err) + goto out; + err = twl4030_write_script_byte(address++, next); +out: + return err; +} + +static int __init twl4030_write_script(u8 address, struct twl4030_ins *script, + int len) +{ + int err; + + for (; len; len--, address++, script++) { + if (len == 1) { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + END_OF_SCRIPT); + if (err) + break; + } else { + err = twl4030_write_script_ins(address, + script->pmb_message, + script->delay, + address + 1); + if (err) + break; + } + } + return err; +} + +static int __init twl4030_config_wakeup3_sequence(u8 address) +{ + int err; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P3 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A3); + if (err) + goto out; + + /* P3 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P3_SW_EVENTS); + if (err) + goto out; + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 wakeup sequence for P3 config error\n"); + return err; +} + +static int __init twl4030_config_wakeup12_sequence(u8 address) +{ + int err = 0; + u8 data; + + /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_S2A12); + if (err) + goto out; + + /* P1/P2 LVL_WAKEUP should be on LEVEL */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P1_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_P2_SW_EVENTS); + if (err) + goto out; + + data |= LVL_WAKEUP; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data, + R_P2_SW_EVENTS); + if (err) + goto out; + + if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) { + /* Disabling AC charger effect on sleep-active transitions */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data, + R_CFG_P1_TRANSITION); + if (err) + goto out; + data &= ~(1<<1); + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data , + R_CFG_P1_TRANSITION); + if (err) + goto out; + } + +out: + if (err) + pr_err("TWL4030 wakeup sequence for P1 and P2" \ + "config error\n"); + return err; +} + +static int __init twl4030_config_sleep_sequence(u8 address) +{ + int err; + + /* Set ACTIVE to SLEEP SEQ address in T2 memory*/ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_A2S); + + if (err) + pr_err("TWL4030 sleep sequence config error\n"); + + return err; +} + +static int __init twl4030_config_warmreset_sequence(u8 address) +{ + int err; + u8 rd_data; + + /* Set WARM RESET SEQ address for P1 */ + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address, + R_SEQ_ADD_WARM); + if (err) + goto out; + + /* P1/P2/P3 enable WARMRESET */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P1_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P2_SW_EVENTS); + if (err) + goto out; + + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data, + R_P3_SW_EVENTS); + if (err) + goto out; + + rd_data |= ENABLE_WARMRESET; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data, + R_P3_SW_EVENTS); +out: + if (err) + pr_err("TWL4030 warmreset seq config error\n"); + return err; +} + +static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig) +{ + int rconfig_addr; + int err; + u8 type; + u8 grp; + + if (rconfig->resource > TOTAL_RESOURCES) { + pr_err("TWL4030 Resource %d does not exist\n", + rconfig->resource); + return -EINVAL; + } + + rconfig_addr = res_config_addrs[rconfig->resource]; + + /* Set resource group */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &grp, + rconfig_addr + DEVGROUP_OFFSET); + if (err) { + pr_err("TWL4030 Resource %d group could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->devgroup >= 0) { + grp &= ~DEVGROUP_MASK; + grp |= rconfig->devgroup << DEVGROUP_SHIFT; + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + grp, rconfig_addr + DEVGROUP_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program devgroup\n"); + return err; + } + } + + /* Set resource types */ + err = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &type, + rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 Resource %d type could not be read\n", + rconfig->resource); + return err; + } + + if (rconfig->type >= 0) { + type &= ~TYPE_MASK; + type |= rconfig->type << TYPE_SHIFT; + } + + if (rconfig->type2 >= 0) { + type &= ~TYPE2_MASK; + type |= rconfig->type2 << TYPE2_SHIFT; + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, + type, rconfig_addr + TYPE_OFFSET); + if (err < 0) { + pr_err("TWL4030 failed to program resource type\n"); + return err; + } + + return 0; +} + +static int __init load_twl4030_script(struct twl4030_script *tscript, + u8 address) +{ + int err; + static int order; + + /* Make sure the script isn't going beyond last valid address (0x3f) */ + if ((address + tscript->size) > END_OF_SCRIPT) { + pr_err("TWL4030 scripts too big error\n"); + return -EINVAL; + } + + err = twl4030_write_script(address, tscript->script, tscript->size); + if (err) + goto out; + + if (tscript->flags & TWL4030_WRST_SCRIPT) { + err = twl4030_config_warmreset_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_WAKEUP12_SCRIPT) { + err = twl4030_config_wakeup12_sequence(address); + if (err) + goto out; + order = 1; + } + if (tscript->flags & TWL4030_WAKEUP3_SCRIPT) { + err = twl4030_config_wakeup3_sequence(address); + if (err) + goto out; + } + if (tscript->flags & TWL4030_SLEEP_SCRIPT) + if (order) + pr_warning("TWL4030: Bad order of scripts (sleep "\ + "script before wakeup) Leads to boot"\ + "failure on some boards\n"); + err = twl4030_config_sleep_sequence(address); +out: + return err; +} + +void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts) +{ + int err = 0; + int i; + struct twl4030_resconfig *resconfig; + u8 address = twl4030_start_script_address; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_1, + R_PROTECT_KEY); + if (err) + goto unlock; + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, R_KEY_2, + R_PROTECT_KEY); + if (err) + goto unlock; + + for (i = 0; i < twl4030_scripts->num; i++) { + err = load_twl4030_script(twl4030_scripts->scripts[i], address); + if (err) + goto load; + address += twl4030_scripts->scripts[i]->size; + } + + resconfig = twl4030_scripts->resource_config; + if (resconfig) { + while (resconfig->resource) { + err = twl4030_configure_resource(resconfig); + if (err) + goto resource; + resconfig++; + + } + } + + err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY); + if (err) + pr_err("TWL4030 Unable to relock registers\n"); + return; + +unlock: + if (err) + pr_err("TWL4030 Unable to unlock registers\n"); + return; +load: + if (err) + pr_err("TWL4030 failed to load scripts\n"); + return; +resource: + if (err) + pr_err("TWL4030 failed to configure resource\n"); + return; +} diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c index 78c2135..fa294b6 100644 --- a/drivers/mfd/ucb1400_core.c +++ b/drivers/mfd/ucb1400_core.c @@ -21,6 +21,7 @@ */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/ucb1400.h> unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel, @@ -48,9 +49,11 @@ static int ucb1400_core_probe(struct device *dev) int err; struct ucb1400 *ucb; struct ucb1400_ts ucb_ts; + struct ucb1400_gpio ucb_gpio; struct snd_ac97 *ac97; memset(&ucb_ts, 0, sizeof(ucb_ts)); + memset(&ucb_gpio, 0, sizeof(ucb_gpio)); ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL); if (!ucb) { @@ -68,25 +71,44 @@ static int ucb1400_core_probe(struct device *dev) goto err0; } + /* GPIO */ + ucb_gpio.ac97 = ac97; + ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1); + if (!ucb->ucb1400_gpio) { + err = -ENOMEM; + goto err0; + } + err = platform_device_add_data(ucb->ucb1400_gpio, &ucb_gpio, + sizeof(ucb_gpio)); + if (err) + goto err1; + err = platform_device_add(ucb->ucb1400_gpio); + if (err) + goto err1; + /* TOUCHSCREEN */ ucb_ts.ac97 = ac97; ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1); if (!ucb->ucb1400_ts) { err = -ENOMEM; - goto err0; + goto err2; } err = platform_device_add_data(ucb->ucb1400_ts, &ucb_ts, sizeof(ucb_ts)); if (err) - goto err1; + goto err3; err = platform_device_add(ucb->ucb1400_ts); if (err) - goto err1; + goto err3; return 0; -err1: +err3: platform_device_put(ucb->ucb1400_ts); +err2: + platform_device_unregister(ucb->ucb1400_gpio); +err1: + platform_device_put(ucb->ucb1400_gpio); err0: kfree(ucb); err: @@ -98,6 +120,8 @@ static int ucb1400_core_remove(struct device *dev) struct ucb1400 *ucb = dev_get_drvdata(dev); platform_device_unregister(ucb->ucb1400_ts); + platform_device_unregister(ucb->ucb1400_gpio); + kfree(ucb); return 0; } diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index fea9085..60c3988 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -18,6 +18,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/errno.h> diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c new file mode 100644 index 0000000..49b7885 --- /dev/null +++ b/drivers/mfd/wm831x-core.c @@ -0,0 +1,1549 @@ +/* + * wm831x-core.c -- Device access for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/auxadc.h> +#include <linux/mfd/wm831x/otp.h> +#include <linux/mfd/wm831x/regulator.h> + +/* Current settings - values are 2*2^(reg_val/4) microamps. These are + * exported since they are used by multiple drivers. + */ +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { + 2, + 2, + 3, + 3, + 4, + 5, + 6, + 7, + 8, + 10, + 11, + 13, + 16, + 19, + 23, + 27, + 32, + 38, + 45, + 54, + 64, + 76, + 91, + 108, + 128, + 152, + 181, + 215, + 256, + 304, + 362, + 431, + 512, + 609, + 724, + 861, + 1024, + 1218, + 1448, + 1722, + 2048, + 2435, + 2896, + 3444, + 4096, + 4871, + 5793, + 6889, + 8192, + 9742, + 11585, + 13777, + 16384, + 19484, + 23170, + 27554, +}; +EXPORT_SYMBOL_GPL(wm831x_isinkv_values); + +enum wm831x_parent { + WM8310 = 0, + WM8311 = 1, + WM8312 = 2, +}; + +static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) +{ + if (!wm831x->locked) + return 0; + + switch (reg) { + case WM831X_WATCHDOG: + case WM831X_DC4_CONTROL: + case WM831X_ON_PIN_CONTROL: + case WM831X_BACKUP_CHARGER_CONTROL: + case WM831X_CHARGER_CONTROL_1: + case WM831X_CHARGER_CONTROL_2: + return 1; + + default: + return 0; + } +} + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * allowing writes to them. + */ +void wm831x_reg_lock(struct wm831x *wm831x) +{ + int ret; + + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers locked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(wm831x->locked); + wm831x->locked = 1; + mutex_unlock(&wm831x->io_lock); + } else { + dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret); + } + +} +EXPORT_SYMBOL_GPL(wm831x_reg_lock); + +/** + * wm831x_reg_unlock: Unlock user keyed registers + * + * The WM831x has a user key preventing writes to particularly + * critical registers. This function locks those registers, + * preventing spurious writes. + */ +int wm831x_reg_unlock(struct wm831x *wm831x) +{ + int ret; + + /* 0x9716 is the value required to unlock the registers */ + ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716); + if (ret == 0) { + dev_vdbg(wm831x->dev, "Registers unlocked\n"); + + mutex_lock(&wm831x->io_lock); + WARN_ON(!wm831x->locked); + wm831x->locked = 0; + mutex_unlock(&wm831x->io_lock); + } + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_unlock); + +static int wm831x_read(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + int ret, i; + u16 *buf = dest; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + ret = wm831x->read_dev(wm831x, reg, bytes, dest); + if (ret < 0) + return ret; + + for (i = 0; i < bytes / 2; i++) { + buf[i] = be16_to_cpu(buf[i]); + + dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n", + buf[i], reg + i, reg + i); + } + + return 0; +} + +/** + * wm831x_reg_read: Read a single WM831x register. + * + * @wm831x: Device to read from. + * @reg: Register to read. + */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg) +{ + unsigned short val; + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + if (ret < 0) + return ret; + else + return val; +} +EXPORT_SYMBOL_GPL(wm831x_reg_read); + +/** + * wm831x_bulk_read: Read multiple WM831x registers + * + * @wm831x: Device to read from + * @reg: First register + * @count: Number of registers + * @buf: Buffer to fill. + */ +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, count * 2, buf); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_bulk_read); + +static int wm831x_write(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + u16 *buf = src; + int i; + + BUG_ON(bytes % 2); + BUG_ON(bytes <= 0); + + for (i = 0; i < bytes / 2; i++) { + if (wm831x_reg_locked(wm831x, reg)) + return -EPERM; + + dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n", + buf[i], reg + i, reg + i); + + buf[i] = cpu_to_be16(buf[i]); + } + + return wm831x->write_dev(wm831x, reg, bytes, src); +} + +/** + * wm831x_reg_write: Write a single WM831x register. + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @val: Value to write. + */ +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val) +{ + int ret; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_write(wm831x, reg, 2, &val); + + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_reg_write); + +/** + * wm831x_set_bits: Set the value of a bitfield in a WM831x register + * + * @wm831x: Device to write to. + * @reg: Register to write to. + * @mask: Mask of bits to set. + * @val: Value to set (unshifted) + */ +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val) +{ + int ret; + u16 r; + + mutex_lock(&wm831x->io_lock); + + ret = wm831x_read(wm831x, reg, 2, &r); + if (ret < 0) + goto out; + + r &= ~mask; + r |= val; + + ret = wm831x_write(wm831x, reg, 2, &r); + +out: + mutex_unlock(&wm831x->io_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_set_bits); + +/** + * wm831x_auxadc_read: Read a value from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int tries = 10; + int ret, src; + + mutex_lock(&wm831x->auxadc_lock); + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_ENA, WM831X_AUX_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret); + goto out; + } + + /* We force a single source at present */ + src = input; + ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE, + 1 << src); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret); + goto out; + } + + ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, + WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret); + goto disable; + } + + do { + msleep(1); + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL); + if (ret < 0) + ret = WM831X_AUX_CVT_ENA; + } while ((ret & WM831X_AUX_CVT_ENA) && --tries); + + if (ret & WM831X_AUX_CVT_ENA) { + dev_err(wm831x->dev, "Timed out reading AUXADC\n"); + ret = -EBUSY; + goto disable; + } + + ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret); + } else { + src = ((ret & WM831X_AUX_DATA_SRC_MASK) + >> WM831X_AUX_DATA_SRC_SHIFT) - 1; + + if (src == 14) + src = WM831X_AUX_CAL; + + if (src != input) { + dev_err(wm831x->dev, "Data from source %d not %d\n", + src, input); + ret = -EINVAL; + } else { + ret &= WM831X_AUX_DATA_MASK; + } + } + +disable: + wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0); +out: + mutex_unlock(&wm831x->auxadc_lock); + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read); + +/** + * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC + * + * @wm831x: Device to read from. + * @input: AUXADC input to read. + */ +int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input) +{ + int ret; + + ret = wm831x_auxadc_read(wm831x, input); + if (ret < 0) + return ret; + + ret *= 1465; + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv); + +static struct resource wm831x_dcdc1_resources[] = { + { + .start = WM831X_DC1_CONTROL_1, + .end = WM831X_DC1_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC1, + .end = WM831X_IRQ_UV_DC1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC1, + .end = WM831X_IRQ_HC_DC1, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_dcdc2_resources[] = { + { + .start = WM831X_DC2_CONTROL_1, + .end = WM831X_DC2_DVS_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC2, + .end = WM831X_IRQ_UV_DC2, + .flags = IORESOURCE_IRQ, + }, + { + .name = "HC", + .start = WM831X_IRQ_HC_DC2, + .end = WM831X_IRQ_HC_DC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc3_resources[] = { + { + .start = WM831X_DC3_CONTROL_1, + .end = WM831X_DC3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC3, + .end = WM831X_IRQ_UV_DC3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_dcdc4_resources[] = { + { + .start = WM831X_DC4_CONTROL, + .end = WM831X_DC4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_DC4, + .end = WM831X_IRQ_UV_DC4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_gpio_resources[] = { + { + .start = WM831X_IRQ_GPIO_1, + .end = WM831X_IRQ_GPIO_16, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink1_resources[] = { + { + .start = WM831X_CURRENT_SINK_1, + .end = WM831X_CURRENT_SINK_1, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS1, + .end = WM831X_IRQ_CS1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_isink2_resources[] = { + { + .start = WM831X_CURRENT_SINK_2, + .end = WM831X_CURRENT_SINK_2, + .flags = IORESOURCE_IO, + }, + { + .start = WM831X_IRQ_CS2, + .end = WM831X_IRQ_CS2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo1_resources[] = { + { + .start = WM831X_LDO1_CONTROL, + .end = WM831X_LDO1_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO1, + .end = WM831X_IRQ_UV_LDO1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo2_resources[] = { + { + .start = WM831X_LDO2_CONTROL, + .end = WM831X_LDO2_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO2, + .end = WM831X_IRQ_UV_LDO2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo3_resources[] = { + { + .start = WM831X_LDO3_CONTROL, + .end = WM831X_LDO3_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO3, + .end = WM831X_IRQ_UV_LDO3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo4_resources[] = { + { + .start = WM831X_LDO4_CONTROL, + .end = WM831X_LDO4_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO4, + .end = WM831X_IRQ_UV_LDO4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo5_resources[] = { + { + .start = WM831X_LDO5_CONTROL, + .end = WM831X_LDO5_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO5, + .end = WM831X_IRQ_UV_LDO5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo6_resources[] = { + { + .start = WM831X_LDO6_CONTROL, + .end = WM831X_LDO6_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO6, + .end = WM831X_IRQ_UV_LDO6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo7_resources[] = { + { + .start = WM831X_LDO7_CONTROL, + .end = WM831X_LDO7_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO7, + .end = WM831X_IRQ_UV_LDO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo8_resources[] = { + { + .start = WM831X_LDO8_CONTROL, + .end = WM831X_LDO8_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO8, + .end = WM831X_IRQ_UV_LDO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo9_resources[] = { + { + .start = WM831X_LDO9_CONTROL, + .end = WM831X_LDO9_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO9, + .end = WM831X_IRQ_UV_LDO9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo10_resources[] = { + { + .start = WM831X_LDO10_CONTROL, + .end = WM831X_LDO10_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, + { + .name = "UV", + .start = WM831X_IRQ_UV_LDO10, + .end = WM831X_IRQ_UV_LDO10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_ldo11_resources[] = { + { + .start = WM831X_LDO11_ON_CONTROL, + .end = WM831X_LDO11_SLEEP_CONTROL, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_on_resources[] = { + { + .start = WM831X_IRQ_ON, + .end = WM831X_IRQ_ON, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct resource wm831x_power_resources[] = { + { + .name = "SYSLO", + .start = WM831X_IRQ_PPM_SYSLO, + .end = WM831X_IRQ_PPM_SYSLO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "PWR SRC", + .start = WM831X_IRQ_PPM_PWR_SRC, + .end = WM831X_IRQ_PPM_PWR_SRC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB CURR", + .start = WM831X_IRQ_PPM_USB_CURR, + .end = WM831X_IRQ_PPM_USB_CURR, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT HOT", + .start = WM831X_IRQ_CHG_BATT_HOT, + .end = WM831X_IRQ_CHG_BATT_HOT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT COLD", + .start = WM831X_IRQ_CHG_BATT_COLD, + .end = WM831X_IRQ_CHG_BATT_COLD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT FAIL", + .start = WM831X_IRQ_CHG_BATT_FAIL, + .end = WM831X_IRQ_CHG_BATT_FAIL, + .flags = IORESOURCE_IRQ, + }, + { + .name = "OV", + .start = WM831X_IRQ_CHG_OV, + .end = WM831X_IRQ_CHG_OV, + .flags = IORESOURCE_IRQ, + }, + { + .name = "END", + .start = WM831X_IRQ_CHG_END, + .end = WM831X_IRQ_CHG_END, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TO", + .start = WM831X_IRQ_CHG_TO, + .end = WM831X_IRQ_CHG_TO, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MODE", + .start = WM831X_IRQ_CHG_MODE, + .end = WM831X_IRQ_CHG_MODE, + .flags = IORESOURCE_IRQ, + }, + { + .name = "START", + .start = WM831X_IRQ_CHG_START, + .end = WM831X_IRQ_CHG_START, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_rtc_resources[] = { + { + .name = "PER", + .start = WM831X_IRQ_RTC_PER, + .end = WM831X_IRQ_RTC_PER, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ALM", + .start = WM831X_IRQ_RTC_ALM, + .end = WM831X_IRQ_RTC_ALM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_status1_resources[] = { + { + .start = WM831X_STATUS_LED_1, + .end = WM831X_STATUS_LED_1, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_status2_resources[] = { + { + .start = WM831X_STATUS_LED_2, + .end = WM831X_STATUS_LED_2, + .flags = IORESOURCE_IO, + }, +}; + +static struct resource wm831x_touch_resources[] = { + { + .name = "TCHPD", + .start = WM831X_IRQ_TCHPD, + .end = WM831X_IRQ_TCHPD, + .flags = IORESOURCE_IRQ, + }, + { + .name = "TCHDATA", + .start = WM831X_IRQ_TCHDATA, + .end = WM831X_IRQ_TCHDATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource wm831x_wdt_resources[] = { + { + .start = WM831X_IRQ_WDOG_TO, + .end = WM831X_IRQ_WDOG_TO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell wm8310_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8311_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell wm8312_devs[] = { + { + .name = "wm831x-buckv", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources), + .resources = wm831x_dcdc1_resources, + }, + { + .name = "wm831x-buckv", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources), + .resources = wm831x_dcdc2_resources, + }, + { + .name = "wm831x-buckp", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources), + .resources = wm831x_dcdc3_resources, + }, + { + .name = "wm831x-boostp", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources), + .resources = wm831x_dcdc4_resources, + }, + { + .name = "wm831x-epe", + .id = 1, + }, + { + .name = "wm831x-epe", + .id = 2, + }, + { + .name = "wm831x-gpio", + .num_resources = ARRAY_SIZE(wm831x_gpio_resources), + .resources = wm831x_gpio_resources, + }, + { + .name = "wm831x-hwmon", + }, + { + .name = "wm831x-isink", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_isink1_resources), + .resources = wm831x_isink1_resources, + }, + { + .name = "wm831x-isink", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_isink2_resources), + .resources = wm831x_isink2_resources, + }, + { + .name = "wm831x-ldo", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_ldo1_resources), + .resources = wm831x_ldo1_resources, + }, + { + .name = "wm831x-ldo", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_ldo2_resources), + .resources = wm831x_ldo2_resources, + }, + { + .name = "wm831x-ldo", + .id = 3, + .num_resources = ARRAY_SIZE(wm831x_ldo3_resources), + .resources = wm831x_ldo3_resources, + }, + { + .name = "wm831x-ldo", + .id = 4, + .num_resources = ARRAY_SIZE(wm831x_ldo4_resources), + .resources = wm831x_ldo4_resources, + }, + { + .name = "wm831x-ldo", + .id = 5, + .num_resources = ARRAY_SIZE(wm831x_ldo5_resources), + .resources = wm831x_ldo5_resources, + }, + { + .name = "wm831x-ldo", + .id = 6, + .num_resources = ARRAY_SIZE(wm831x_ldo6_resources), + .resources = wm831x_ldo6_resources, + }, + { + .name = "wm831x-aldo", + .id = 7, + .num_resources = ARRAY_SIZE(wm831x_ldo7_resources), + .resources = wm831x_ldo7_resources, + }, + { + .name = "wm831x-aldo", + .id = 8, + .num_resources = ARRAY_SIZE(wm831x_ldo8_resources), + .resources = wm831x_ldo8_resources, + }, + { + .name = "wm831x-aldo", + .id = 9, + .num_resources = ARRAY_SIZE(wm831x_ldo9_resources), + .resources = wm831x_ldo9_resources, + }, + { + .name = "wm831x-aldo", + .id = 10, + .num_resources = ARRAY_SIZE(wm831x_ldo10_resources), + .resources = wm831x_ldo10_resources, + }, + { + .name = "wm831x-alive-ldo", + .id = 11, + .num_resources = ARRAY_SIZE(wm831x_ldo11_resources), + .resources = wm831x_ldo11_resources, + }, + { + .name = "wm831x-on", + .num_resources = ARRAY_SIZE(wm831x_on_resources), + .resources = wm831x_on_resources, + }, + { + .name = "wm831x-power", + .num_resources = ARRAY_SIZE(wm831x_power_resources), + .resources = wm831x_power_resources, + }, + { + .name = "wm831x-rtc", + .num_resources = ARRAY_SIZE(wm831x_rtc_resources), + .resources = wm831x_rtc_resources, + }, + { + .name = "wm831x-status", + .id = 1, + .num_resources = ARRAY_SIZE(wm831x_status1_resources), + .resources = wm831x_status1_resources, + }, + { + .name = "wm831x-status", + .id = 2, + .num_resources = ARRAY_SIZE(wm831x_status2_resources), + .resources = wm831x_status2_resources, + }, + { + .name = "wm831x-touch", + .num_resources = ARRAY_SIZE(wm831x_touch_resources), + .resources = wm831x_touch_resources, + }, + { + .name = "wm831x-watchdog", + .num_resources = ARRAY_SIZE(wm831x_wdt_resources), + .resources = wm831x_wdt_resources, + }, +}; + +static struct mfd_cell backlight_devs[] = { + { + .name = "wm831x-backlight", + }, +}; + +/* + * Instantiate the generic non-control parts of the device. + */ +static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) +{ + struct wm831x_pdata *pdata = wm831x->dev->platform_data; + int rev; + enum wm831x_parent parent; + int ret; + + mutex_init(&wm831x->io_lock); + mutex_init(&wm831x->key_lock); + mutex_init(&wm831x->auxadc_lock); + dev_set_drvdata(wm831x->dev, wm831x); + + ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret); + goto err; + } + if (ret != 0x6204) { + dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret); + ret = -EINVAL; + goto err; + } + + ret = wm831x_reg_read(wm831x, WM831X_REVISION); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read revision: %d\n", ret); + goto err; + } + rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT; + + ret = wm831x_reg_read(wm831x, WM831X_RESET_ID); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret); + goto err; + } + + switch (ret) { + case 0x8310: + parent = WM8310; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8310 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8311: + parent = WM8311; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8311 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0x8312: + parent = WM8312; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM8312 revision %c\n", + 'A' + rev); + break; + } + break; + + case 0: + /* Some engineering samples do not have the ID set, + * rely on the device being registered correctly. + * This will need revisiting for future devices with + * multiple dies. + */ + parent = id; + switch (rev) { + case 0: + dev_info(wm831x->dev, "WM831%d ES revision %c\n", + parent, 'A' + rev); + break; + } + break; + + default: + dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); + ret = -EINVAL; + goto err; + } + + /* This will need revisiting in future but is OK for all + * current parts. + */ + if (parent != id) + dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n", + id); + + /* Bootstrap the user key */ + ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY); + if (ret < 0) { + dev_err(wm831x->dev, "Failed to read security key: %d\n", ret); + goto err; + } + if (ret != 0) { + dev_warn(wm831x->dev, "Security key had non-zero value %x\n", + ret); + wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0); + } + wm831x->locked = 1; + + if (pdata && pdata->pre_init) { + ret = pdata->pre_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "pre_init() failed: %d\n", ret); + goto err; + } + } + + ret = wm831x_irq_init(wm831x, irq); + if (ret != 0) + goto err; + + /* The core device is up, instantiate the subdevices. */ + switch (parent) { + case WM8310: + ret = mfd_add_devices(wm831x->dev, -1, + wm8310_devs, ARRAY_SIZE(wm8310_devs), + NULL, 0); + break; + + case WM8311: + ret = mfd_add_devices(wm831x->dev, -1, + wm8311_devs, ARRAY_SIZE(wm8311_devs), + NULL, 0); + break; + + case WM8312: + ret = mfd_add_devices(wm831x->dev, -1, + wm8312_devs, ARRAY_SIZE(wm8312_devs), + NULL, 0); + break; + + default: + /* If this happens the bus probe function is buggy */ + BUG(); + } + + if (ret != 0) { + dev_err(wm831x->dev, "Failed to add children\n"); + goto err_irq; + } + + if (pdata && pdata->backlight) { + /* Treat errors as non-critical */ + ret = mfd_add_devices(wm831x->dev, -1, backlight_devs, + ARRAY_SIZE(backlight_devs), NULL, 0); + if (ret < 0) + dev_err(wm831x->dev, "Failed to add backlight: %d\n", + ret); + } + + wm831x_otp_init(wm831x); + + if (pdata && pdata->post_init) { + ret = pdata->post_init(wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "post_init() failed: %d\n", ret); + goto err_irq; + } + } + + return 0; + +err_irq: + wm831x_irq_exit(wm831x); +err: + mfd_remove_devices(wm831x->dev); + kfree(wm831x); + return ret; +} + +static void wm831x_device_exit(struct wm831x *wm831x) +{ + wm831x_otp_exit(wm831x); + mfd_remove_devices(wm831x->dev); + wm831x_irq_exit(wm831x); + kfree(wm831x); +} + +static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = wm831x->control_data; + int ret; + u16 r = cpu_to_be16(reg); + + ret = i2c_master_send(i2c, (unsigned char *)&r, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + ret = i2c_master_recv(i2c, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; +} + +/* Currently we allocate the write buffer on the stack; this is OK for + * small writes - if we need to do large writes this will need to be + * revised. + */ +static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src) +{ + struct i2c_client *i2c = wm831x->control_data; + unsigned char msg[bytes + 2]; + int ret; + + reg = cpu_to_be16(reg); + memcpy(&msg[0], ®, 2); + memcpy(&msg[2], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 2); + if (ret < 0) + return ret; + if (ret < bytes + 2) + return -EIO; + + return 0; +} + +static int wm831x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm831x *wm831x; + + wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL); + if (wm831x == NULL) { + kfree(i2c); + return -ENOMEM; + } + + i2c_set_clientdata(i2c, wm831x); + wm831x->dev = &i2c->dev; + wm831x->control_data = i2c; + wm831x->read_dev = wm831x_i2c_read_device; + wm831x->write_dev = wm831x_i2c_write_device; + + return wm831x_device_init(wm831x, id->driver_data, i2c->irq); +} + +static int wm831x_i2c_remove(struct i2c_client *i2c) +{ + struct wm831x *wm831x = i2c_get_clientdata(i2c); + + wm831x_device_exit(wm831x); + + return 0; +} + +static const struct i2c_device_id wm831x_i2c_id[] = { + { "wm8310", WM8310 }, + { "wm8311", WM8311 }, + { "wm8312", WM8312 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); + + +static struct i2c_driver wm831x_i2c_driver = { + .driver = { + .name = "wm831x", + .owner = THIS_MODULE, + }, + .probe = wm831x_i2c_probe, + .remove = wm831x_i2c_remove, + .id_table = wm831x_i2c_id, +}; + +static int __init wm831x_i2c_init(void) +{ + int ret; + + ret = i2c_add_driver(&wm831x_i2c_driver); + if (ret != 0) + pr_err("Failed to register wm831x I2C driver: %d\n", ret); + + return ret; +} +subsys_initcall(wm831x_i2c_init); + +static void __exit wm831x_i2c_exit(void) +{ + i2c_del_driver(&wm831x_i2c_driver); +} +module_exit(wm831x_i2c_exit); + +MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mark Brown"); diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c new file mode 100644 index 0000000..d3015df --- /dev/null +++ b/drivers/mfd/wm831x-irq.c @@ -0,0 +1,559 @@ +/* + * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/interrupt.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> + +#include <linux/delay.h> + +/* + * Since generic IRQs don't currently support interrupt controllers on + * interrupt driven buses we don't use genirq but instead provide an + * interface that looks very much like the standard ones. This leads + * to some bodges, including storing interrupt handler information in + * the static irq_data table we use to look up the data for individual + * interrupts, but hopefully won't last too long. + */ + +struct wm831x_irq_data { + int primary; + int reg; + int mask; + irq_handler_t handler; + void *handler_data; +}; + +static struct wm831x_irq_data wm831x_irqs[] = { + [WM831X_IRQ_TEMP_THW] = { + .primary = WM831X_TEMP_INT, + .reg = 1, + .mask = WM831X_TEMP_THW_EINT, + }, + [WM831X_IRQ_GPIO_1] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP1_EINT, + }, + [WM831X_IRQ_GPIO_2] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP2_EINT, + }, + [WM831X_IRQ_GPIO_3] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP3_EINT, + }, + [WM831X_IRQ_GPIO_4] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP4_EINT, + }, + [WM831X_IRQ_GPIO_5] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP5_EINT, + }, + [WM831X_IRQ_GPIO_6] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP6_EINT, + }, + [WM831X_IRQ_GPIO_7] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP7_EINT, + }, + [WM831X_IRQ_GPIO_8] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP8_EINT, + }, + [WM831X_IRQ_GPIO_9] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP9_EINT, + }, + [WM831X_IRQ_GPIO_10] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP10_EINT, + }, + [WM831X_IRQ_GPIO_11] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP11_EINT, + }, + [WM831X_IRQ_GPIO_12] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP12_EINT, + }, + [WM831X_IRQ_GPIO_13] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP13_EINT, + }, + [WM831X_IRQ_GPIO_14] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP14_EINT, + }, + [WM831X_IRQ_GPIO_15] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP15_EINT, + }, + [WM831X_IRQ_GPIO_16] = { + .primary = WM831X_GP_INT, + .reg = 5, + .mask = WM831X_GP16_EINT, + }, + [WM831X_IRQ_ON] = { + .primary = WM831X_ON_PIN_INT, + .reg = 1, + .mask = WM831X_ON_PIN_EINT, + }, + [WM831X_IRQ_PPM_SYSLO] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_SYSLO_EINT, + }, + [WM831X_IRQ_PPM_PWR_SRC] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_PWR_SRC_EINT, + }, + [WM831X_IRQ_PPM_USB_CURR] = { + .primary = WM831X_PPM_INT, + .reg = 1, + .mask = WM831X_PPM_USB_CURR_EINT, + }, + [WM831X_IRQ_WDOG_TO] = { + .primary = WM831X_WDOG_INT, + .reg = 1, + .mask = WM831X_WDOG_TO_EINT, + }, + [WM831X_IRQ_RTC_PER] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_PER_EINT, + }, + [WM831X_IRQ_RTC_ALM] = { + .primary = WM831X_RTC_INT, + .reg = 1, + .mask = WM831X_RTC_ALM_EINT, + }, + [WM831X_IRQ_CHG_BATT_HOT] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_HOT_EINT, + }, + [WM831X_IRQ_CHG_BATT_COLD] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_COLD_EINT, + }, + [WM831X_IRQ_CHG_BATT_FAIL] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_BATT_FAIL_EINT, + }, + [WM831X_IRQ_CHG_OV] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_OV_EINT, + }, + [WM831X_IRQ_CHG_END] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_END_EINT, + }, + [WM831X_IRQ_CHG_TO] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_TO_EINT, + }, + [WM831X_IRQ_CHG_MODE] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_MODE_EINT, + }, + [WM831X_IRQ_CHG_START] = { + .primary = WM831X_CHG_INT, + .reg = 2, + .mask = WM831X_CHG_START_EINT, + }, + [WM831X_IRQ_TCHDATA] = { + .primary = WM831X_TCHDATA_INT, + .reg = 1, + .mask = WM831X_TCHDATA_EINT, + }, + [WM831X_IRQ_TCHPD] = { + .primary = WM831X_TCHPD_INT, + .reg = 1, + .mask = WM831X_TCHPD_EINT, + }, + [WM831X_IRQ_AUXADC_DATA] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DATA_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP1] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP1_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP2] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP2_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP3] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP3_EINT, + }, + [WM831X_IRQ_AUXADC_DCOMP4] = { + .primary = WM831X_AUXADC_INT, + .reg = 1, + .mask = WM831X_AUXADC_DCOMP4_EINT, + }, + [WM831X_IRQ_CS1] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS1_EINT, + }, + [WM831X_IRQ_CS2] = { + .primary = WM831X_CS_INT, + .reg = 2, + .mask = WM831X_CS2_EINT, + }, + [WM831X_IRQ_HC_DC1] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC1_EINT, + }, + [WM831X_IRQ_HC_DC2] = { + .primary = WM831X_HC_INT, + .reg = 4, + .mask = WM831X_HC_DC2_EINT, + }, + [WM831X_IRQ_UV_LDO1] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO1_EINT, + }, + [WM831X_IRQ_UV_LDO2] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO2_EINT, + }, + [WM831X_IRQ_UV_LDO3] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO3_EINT, + }, + [WM831X_IRQ_UV_LDO4] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO4_EINT, + }, + [WM831X_IRQ_UV_LDO5] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO5_EINT, + }, + [WM831X_IRQ_UV_LDO6] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO6_EINT, + }, + [WM831X_IRQ_UV_LDO7] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO7_EINT, + }, + [WM831X_IRQ_UV_LDO8] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO8_EINT, + }, + [WM831X_IRQ_UV_LDO9] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO9_EINT, + }, + [WM831X_IRQ_UV_LDO10] = { + .primary = WM831X_UV_INT, + .reg = 3, + .mask = WM831X_UV_LDO10_EINT, + }, + [WM831X_IRQ_UV_DC1] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC1_EINT, + }, + [WM831X_IRQ_UV_DC2] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC2_EINT, + }, + [WM831X_IRQ_UV_DC3] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC3_EINT, + }, + [WM831X_IRQ_UV_DC4] = { + .primary = WM831X_UV_INT, + .reg = 4, + .mask = WM831X_UV_DC4_EINT, + }, +}; + +static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg; +} + +static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data) +{ + return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg; +} + +static void __wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_enable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_enable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_enable_irq); + +static void __wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask; + wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data), + wm831x->irq_masks[irq_data->reg - 1]); +} + +void wm831x_disable_irq(struct wm831x *wm831x, int irq) +{ + mutex_lock(&wm831x->irq_lock); + __wm831x_disable_irq(wm831x, irq); + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_disable_irq); + +int wm831x_request_irq(struct wm831x *wm831x, + unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, + void *dev) +{ + int ret = 0; + + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return -EINVAL; + + mutex_lock(&wm831x->irq_lock); + + if (wm831x_irqs[irq].handler) { + dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq); + ret = -EINVAL; + goto out; + } + + wm831x_irqs[irq].handler = handler; + wm831x_irqs[irq].handler_data = dev; + + __wm831x_enable_irq(wm831x, irq); + +out: + mutex_unlock(&wm831x->irq_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(wm831x_request_irq); + +void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data) +{ + if (irq < 0 || irq >= WM831X_NUM_IRQS) + return; + + mutex_lock(&wm831x->irq_lock); + + wm831x_irqs[irq].handler = NULL; + wm831x_irqs[irq].handler_data = NULL; + + __wm831x_disable_irq(wm831x, irq); + + mutex_unlock(&wm831x->irq_lock); +} +EXPORT_SYMBOL_GPL(wm831x_free_irq); + + +static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status) +{ + struct wm831x_irq_data *irq_data = &wm831x_irqs[irq]; + + if (irq_data->handler) { + irq_data->handler(irq, irq_data->handler_data); + wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data), + irq_data->mask); + } else { + dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq); + __wm831x_disable_irq(wm831x, irq); + } +} + +/* Main interrupt handling occurs in a workqueue since we need + * interrupts enabled to interact with the chip. */ +static void wm831x_irq_worker(struct work_struct *work) +{ + struct wm831x *wm831x = container_of(work, struct wm831x, irq_work); + unsigned int i; + int primary; + int status_regs[5]; + int read[5] = { 0 }; + int *status; + + primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS); + if (primary < 0) { + dev_err(wm831x->dev, "Failed to read system interrupt: %d\n", + primary); + goto out; + } + + mutex_lock(&wm831x->irq_lock); + + for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) { + int offset = wm831x_irqs[i].reg - 1; + + if (!(primary & wm831x_irqs[i].primary)) + continue; + + status = &status_regs[offset]; + + /* Hopefully there should only be one register to read + * each time otherwise we ought to do a block read. */ + if (!read[offset]) { + *status = wm831x_reg_read(wm831x, + irq_data_to_status_reg(&wm831x_irqs[i])); + if (*status < 0) { + dev_err(wm831x->dev, + "Failed to read IRQ status: %d\n", + *status); + goto out_lock; + } + + /* Mask out the disabled IRQs */ + *status &= ~wm831x->irq_masks[offset]; + read[offset] = 1; + } + + if (*status & wm831x_irqs[i].mask) + wm831x_handle_irq(wm831x, i, *status); + } + +out_lock: + mutex_unlock(&wm831x->irq_lock); +out: + enable_irq(wm831x->irq); +} + + +static irqreturn_t wm831x_cpu_irq(int irq, void *data) +{ + struct wm831x *wm831x = data; + + /* Shut the interrupt to the CPU up and schedule the actual + * handler; we can't check that the IRQ is asserted. */ + disable_irq_nosync(irq); + + queue_work(wm831x->irq_wq, &wm831x->irq_work); + + return IRQ_HANDLED; +} + +int wm831x_irq_init(struct wm831x *wm831x, int irq) +{ + int i, ret; + + if (!irq) { + dev_warn(wm831x->dev, + "No interrupt specified - functionality limited\n"); + return 0; + } + + + wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq"); + if (!wm831x->irq_wq) { + dev_err(wm831x->dev, "Failed to allocate IRQ worker\n"); + return -ESRCH; + } + + wm831x->irq = irq; + mutex_init(&wm831x->irq_lock); + INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); + + /* Mask the individual interrupt sources */ + for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) { + wm831x->irq_masks[i] = 0xffff; + wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i, + 0xffff); + } + + /* Enable top level interrupts, we mask at secondary level */ + wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0); + + /* We're good to go. We set IRQF_SHARED since there's a + * chance the driver will interoperate with another driver but + * the need to disable the IRQ while handing via I2C/SPI means + * that this may break and performance will be impacted. If + * this does happen it's a hardware design issue and the only + * other alternative would be polling. + */ + ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED, + "wm831x", wm831x); + if (ret != 0) { + dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n", + irq, ret); + return ret; + } + + return 0; +} + +void wm831x_irq_exit(struct wm831x *wm831x) +{ + if (wm831x->irq) + free_irq(wm831x->irq, wm831x); +} diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c new file mode 100644 index 0000000..f742745 --- /dev/null +++ b/drivers/mfd/wm831x-otp.c @@ -0,0 +1,83 @@ +/* + * wm831x-otp.c -- OTP for Wolfson WM831x PMICs + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/mfd/core.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/otp.h> + +/* In bytes */ +#define WM831X_UNIQUE_ID_LEN 16 + +/* Read the unique ID from the chip into id */ +static int wm831x_unique_id_read(struct wm831x *wm831x, char *id) +{ + int i, val; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) { + val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i); + if (val < 0) + return val; + + id[i * 2] = (val >> 8) & 0xff; + id[(i * 2) + 1] = val & 0xff; + } + + return 0; +} + +static ssize_t wm831x_unique_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm831x *wm831x = dev_get_drvdata(dev); + int i, rval; + char id[WM831X_UNIQUE_ID_LEN]; + ssize_t ret = 0; + + rval = wm831x_unique_id_read(wm831x, id); + if (rval < 0) + return 0; + + for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++) + ret += sprintf(&buf[ret], "%02x", buf[i]); + + ret += sprintf(&buf[ret], "\n"); + + return ret; +} + +static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL); + +int wm831x_otp_init(struct wm831x *wm831x) +{ + int ret; + + ret = device_create_file(wm831x->dev, &dev_attr_unique_id); + if (ret != 0) + dev_err(wm831x->dev, "Unique ID attribute not created: %d\n", + ret); + + return ret; +} + +void wm831x_otp_exit(struct wm831x *wm831x) +{ + device_remove_file(wm831x->dev, &dev_attr_unique_id); +} + diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fe24079..ba27c9d 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -353,15 +353,15 @@ static void wm8350_irq_call_handler(struct wm8350 *wm8350, int irq) } /* - * wm8350_irq_worker actually handles the interrupts. Since all + * This is a threaded IRQ handler so can access I2C/SPI. Since all * interrupts are clear on read the IRQ line will be reasserted and * the physical IRQ will be handled again if another interrupt is * asserted while we run - in the normal course of events this is a * rare occurrence so we save I2C/SPI reads. */ -static void wm8350_irq_worker(struct work_struct *work) +static irqreturn_t wm8350_irq(int irq, void *data) { - struct wm8350 *wm8350 = container_of(work, struct wm8350, irq_work); + struct wm8350 *wm8350 = data; u16 level_one, status1, status2, comp; /* TODO: Use block reads to improve performance? */ @@ -552,16 +552,6 @@ static void wm8350_irq_worker(struct work_struct *work) } } - enable_irq(wm8350->chip_irq); -} - -static irqreturn_t wm8350_irq(int irq, void *data) -{ - struct wm8350 *wm8350 = data; - - disable_irq_nosync(irq); - schedule_work(&wm8350->irq_work); - return IRQ_HANDLED; } @@ -1428,9 +1418,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); - INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); if (irq) { - int flags = 0; + int flags = IRQF_ONESHOT; if (pdata && pdata->irq_high) { flags |= IRQF_TRIGGER_HIGH; @@ -1444,8 +1433,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, WM8350_IRQ_POL); } - ret = request_irq(irq, wm8350_irq, flags, - "wm8350", wm8350); + ret = request_threaded_irq(irq, NULL, wm8350_irq, flags, + "wm8350", wm8350); if (ret != 0) { dev_err(wm8350->dev, "Failed to request IRQ: %d\n", ret); @@ -1472,6 +1461,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, &(wm8350->codec.pdev)); wm8350_client_dev_register(wm8350, "wm8350-gpio", &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-hwmon", + &(wm8350->hwmon.pdev)); wm8350_client_dev_register(wm8350, "wm8350-power", &(wm8350->power.pdev)); wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); @@ -1498,11 +1489,11 @@ void wm8350_device_exit(struct wm8350 *wm8350) platform_device_unregister(wm8350->wdt.pdev); platform_device_unregister(wm8350->rtc.pdev); platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->hwmon.pdev); platform_device_unregister(wm8350->gpio.pdev); platform_device_unregister(wm8350->codec.pdev); free_irq(wm8350->chip_irq, wm8350); - flush_work(&wm8350->irq_work); kfree(wm8350->reg_cache); } EXPORT_SYMBOL_GPL(wm8350_device_exit); |
