summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/stmpe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/stmpe.c')
-rw-r--r--drivers/mfd/stmpe.c134
1 files changed, 96 insertions, 38 deletions
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index e07947e..2dd8d49 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -298,6 +298,11 @@ static struct mfd_cell stmpe_gpio_cell = {
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
+static struct mfd_cell stmpe_gpio_cell_noirq = {
+ .name = "stmpe-gpio",
+ /* gpio cell resources consist of an irq only so no resources here */
+};
+
/*
* Keypad (1601, 2401, 2403)
*/
@@ -346,6 +351,13 @@ static struct stmpe_variant_block stmpe801_blocks[] = {
},
};
+static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
+ {
+ .cell = &stmpe_gpio_cell_noirq,
+ .block = STMPE_BLOCK_GPIO,
+ },
+};
+
static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
bool enable)
{
@@ -367,6 +379,17 @@ static struct stmpe_variant_info stmpe801 = {
.enable = stmpe801_enable,
};
+static struct stmpe_variant_info stmpe801_noirq = {
+ .name = "stmpe801",
+ .id_val = STMPE801_ID,
+ .id_mask = 0xffff,
+ .num_gpios = 8,
+ .regs = stmpe801_regs,
+ .blocks = stmpe801_blocks_noirq,
+ .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
+ .enable = stmpe801_enable,
+};
+
/*
* Touchscreen (STMPE811 or STMPE610)
*/
@@ -712,7 +735,7 @@ static struct stmpe_variant_info stmpe2403 = {
.enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
};
-static struct stmpe_variant_info *stmpe_variant_info[] = {
+static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
[STMPE610] = &stmpe610,
[STMPE801] = &stmpe801,
[STMPE811] = &stmpe811,
@@ -721,6 +744,16 @@ static struct stmpe_variant_info *stmpe_variant_info[] = {
[STMPE2403] = &stmpe2403,
};
+/*
+ * These devices can be connected in a 'no-irq' configuration - the irq pin
+ * is not used and the device cannot interrupt the CPU. Here we only list
+ * devices which support this configuration - the driver will fail probing
+ * for any devices not listed here which are configured in this way.
+ */
+static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
+ [STMPE801] = &stmpe801_noirq,
+};
+
static irqreturn_t stmpe_irq(int irq, void *data)
{
struct stmpe *stmpe = data;
@@ -864,7 +897,7 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
unsigned int irq_trigger = stmpe->pdata->irq_trigger;
int autosleep_timeout = stmpe->pdata->autosleep_timeout;
struct stmpe_variant_info *variant = stmpe->variant;
- u8 icr;
+ u8 icr = 0;
unsigned int id;
u8 data[2];
int ret;
@@ -887,31 +920,33 @@ static int __devinit stmpe_chip_init(struct stmpe *stmpe)
if (ret)
return ret;
- if (id == STMPE801_ID)
- icr = STMPE801_REG_SYS_CTRL_INT_EN;
- else
- icr = STMPE_ICR_LSB_GIM;
-
- /* STMPE801 doesn't support Edge interrupts */
- if (id != STMPE801_ID) {
- if (irq_trigger == IRQF_TRIGGER_FALLING ||
- irq_trigger == IRQF_TRIGGER_RISING)
- icr |= STMPE_ICR_LSB_EDGE;
- }
-
- if (irq_trigger == IRQF_TRIGGER_RISING ||
- irq_trigger == IRQF_TRIGGER_HIGH) {
+ if (stmpe->irq >= 0) {
if (id == STMPE801_ID)
- icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+ icr = STMPE801_REG_SYS_CTRL_INT_EN;
else
- icr |= STMPE_ICR_LSB_HIGH;
- }
+ icr = STMPE_ICR_LSB_GIM;
- if (stmpe->pdata->irq_invert_polarity) {
- if (id == STMPE801_ID)
- icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
- else
- icr ^= STMPE_ICR_LSB_HIGH;
+ /* STMPE801 doesn't support Edge interrupts */
+ if (id != STMPE801_ID) {
+ if (irq_trigger == IRQF_TRIGGER_FALLING ||
+ irq_trigger == IRQF_TRIGGER_RISING)
+ icr |= STMPE_ICR_LSB_EDGE;
+ }
+
+ if (irq_trigger == IRQF_TRIGGER_RISING ||
+ irq_trigger == IRQF_TRIGGER_HIGH) {
+ if (id == STMPE801_ID)
+ icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+ else
+ icr |= STMPE_ICR_LSB_HIGH;
+ }
+
+ if (stmpe->pdata->irq_invert_polarity) {
+ if (id == STMPE801_ID)
+ icr ^= STMPE801_REG_SYS_CTRL_INT_HI;
+ else
+ icr ^= STMPE_ICR_LSB_HIGH;
+ }
}
if (stmpe->pdata->autosleep) {
@@ -1001,19 +1036,38 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
stmpe->irq = ci->irq;
}
+ if (stmpe->irq < 0) {
+ /* use alternate variant info for no-irq mode, if supported */
+ dev_info(stmpe->dev,
+ "%s configured in no-irq mode by platform data\n",
+ stmpe->variant->name);
+ if (!stmpe_noirq_variant_info[stmpe->partnum]) {
+ dev_err(stmpe->dev,
+ "%s does not support no-irq mode!\n",
+ stmpe->variant->name);
+ ret = -ENODEV;
+ goto free_gpio;
+ }
+ stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
+ }
+
ret = stmpe_chip_init(stmpe);
if (ret)
goto free_gpio;
- ret = stmpe_irq_init(stmpe);
- if (ret)
- goto free_gpio;
+ if (stmpe->irq >= 0) {
+ ret = stmpe_irq_init(stmpe);
+ if (ret)
+ goto free_gpio;
- ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
- pdata->irq_trigger | IRQF_ONESHOT, "stmpe", stmpe);
- if (ret) {
- dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
- goto out_removeirq;
+ ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
+ pdata->irq_trigger | IRQF_ONESHOT,
+ "stmpe", stmpe);
+ if (ret) {
+ dev_err(stmpe->dev, "failed to request IRQ: %d\n",
+ ret);
+ goto out_removeirq;
+ }
}
ret = stmpe_devices_init(stmpe);
@@ -1026,9 +1080,11 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
out_removedevs:
mfd_remove_devices(stmpe->dev);
- free_irq(stmpe->irq, stmpe);
+ if (stmpe->irq >= 0)
+ free_irq(stmpe->irq, stmpe);
out_removeirq:
- stmpe_irq_remove(stmpe);
+ if (stmpe->irq >= 0)
+ stmpe_irq_remove(stmpe);
free_gpio:
if (pdata->irq_over_gpio)
gpio_free(pdata->irq_gpio);
@@ -1041,8 +1097,10 @@ int stmpe_remove(struct stmpe *stmpe)
{
mfd_remove_devices(stmpe->dev);
- free_irq(stmpe->irq, stmpe);
- stmpe_irq_remove(stmpe);
+ if (stmpe->irq >= 0) {
+ free_irq(stmpe->irq, stmpe);
+ stmpe_irq_remove(stmpe);
+ }
if (stmpe->pdata->irq_over_gpio)
gpio_free(stmpe->pdata->irq_gpio);
@@ -1057,7 +1115,7 @@ static int stmpe_suspend(struct device *dev)
{
struct stmpe *stmpe = dev_get_drvdata(dev);
- if (device_may_wakeup(dev))
+ if (stmpe->irq >= 0 && device_may_wakeup(dev))
enable_irq_wake(stmpe->irq);
return 0;
@@ -1067,7 +1125,7 @@ static int stmpe_resume(struct device *dev)
{
struct stmpe *stmpe = dev_get_drvdata(dev);
- if (device_may_wakeup(dev))
+ if (stmpe->irq >= 0 && device_may_wakeup(dev))
disable_irq_wake(stmpe->irq);
return 0;
OpenPOWER on IntegriCloud