diff options
Diffstat (limited to 'drivers/media')
329 files changed, 44573 insertions, 8503 deletions
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 6995940..9575db4 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -68,7 +68,6 @@ config VIDEO_V4L2_SUBDEV_API config DVB_CORE tristate "DVB for Linux" - depends on NET && INET select CRC32 help DVB core utility functions for device handling, software fallbacks etc. @@ -85,6 +84,19 @@ config DVB_CORE If unsure say N. +config DVB_NET + bool "DVB Network Support" + default (NET && INET) + depends on NET && INET && DVB_CORE + help + This option enables DVB Network Support which is a part of the DVB + standard. It is used, for example, by automatic firmware updates used + on Set-Top-Boxes. It can also be used to access the Internet via the + DVB card, if the network provider supports it. + + You may want to disable the network support on embedded devices. If + unsure say Y. + config VIDEO_MEDIA tristate default (DVB_CORE && (VIDEO_DEV = n)) || (VIDEO_DEV && (DVB_CORE = n)) || (DVB_CORE && VIDEO_DEV) diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index 22d3ca3..996302a 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -23,6 +23,7 @@ config MEDIA_TUNER depends on VIDEO_MEDIA && I2C select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE @@ -152,6 +153,15 @@ config MEDIA_TUNER_XC5000 This device is only used inside a SiP called together with a demodulator for now. +config MEDIA_TUNER_XC4000 + tristate "Xceive XC4000 silicon tuner" + depends on VIDEO_MEDIA && I2C + default m if MEDIA_TUNER_CUSTOMISE + help + A driver for the silicon tuner XC4000 from Xceive. + This device is only used inside a SiP called together with a + demodulator for now. + config MEDIA_TUNER_MXL5005S tristate "MaxLinear MSL5005S silicon tuner" depends on VIDEO_MEDIA && I2C diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile index 2cb4f53..20d24fc 100644 --- a/drivers/media/common/tuners/Makefile +++ b/drivers/media/common/tuners/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MEDIA_TUNER_TDA9887) += tda9887.o obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o +obj-$(CONFIG_MEDIA_TUNER_XC4000) += xc4000.o obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index afba6dc..94a603a 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -1805,6 +1805,10 @@ struct tunertype tuners[] = { .name = "Xceive 5000 tuner", /* see xc5000.c for details */ }, + [TUNER_XC4000] = { /* Xceive 4000 */ + .name = "Xceive 4000 tuner", + /* see xc4000.c for details */ + }, [TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */ .name = "TCL tuner MF02GIP-5N-E", .params = tuner_tcl_mf02gip_5n_params, diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c new file mode 100644 index 0000000..634f4d9 --- /dev/null +++ b/drivers/media/common/tuners/xc4000.c @@ -0,0 +1,1691 @@ +/* + * Driver for Xceive XC4000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Xceive Corporation + * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> + * Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com> + * Copyright (c) 2009 Davide Ferri <d.ferri@zero11.it> + * Copyright (c) 2010 Istvan Varga <istvan_v@mailbox.hu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <linux/dvb/frontend.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <asm/unaligned.h> + +#include "dvb_frontend.h" + +#include "xc4000.h" +#include "tuner-i2c.h" +#include "tuner-xc2028-types.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off))."); + +static int no_poweroff; +module_param(no_poweroff, int, 0644); +MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, " + "0 (default): use device-specific default mode)."); + +static int audio_std; +module_param(audio_std, int, 0644); +MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly " + "needs to know what audio standard is needed for some video standards " + "with audio A2 or NICAM. The valid settings are a sum of:\n" + " 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n" + " 2: use A2 instead of NICAM or BTSC\n" + " 4: use SECAM/K3 instead of K1\n" + " 8: use PAL-D/K audio for SECAM-D/K\n" + "16: use FM radio input 1 instead of input 2\n" + "32: use mono audio (the lower three bits are ignored)"); + +static char firmware_name[30]; +module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); +MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " + "default firmware name."); + +static DEFINE_MUTEX(xc4000_list_mutex); +static LIST_HEAD(hybrid_tuner_instance_list); + +#define dprintk(level, fmt, arg...) if (debug >= level) \ + printk(KERN_INFO "%s: " fmt, "xc4000", ## arg) + +/* struct for storing firmware table */ +struct firmware_description { + unsigned int type; + v4l2_std_id id; + __u16 int_freq; + unsigned char *ptr; + unsigned int size; +}; + +struct firmware_properties { + unsigned int type; + v4l2_std_id id; + v4l2_std_id std_req; + __u16 int_freq; + unsigned int scode_table; + int scode_nr; +}; + +struct xc4000_priv { + struct tuner_i2c_props i2c_props; + struct list_head hybrid_tuner_instance_list; + struct firmware_description *firm; + int firm_size; + u32 if_khz; + u32 freq_hz; + u32 bandwidth; + u8 video_standard; + u8 rf_mode; + u8 default_pm; + u8 dvb_amplitude; + u8 set_smoothedcvbs; + u8 ignore_i2c_write_errors; + __u16 firm_version; + struct firmware_properties cur_fw; + __u16 hwmodel; + __u16 hwvers; + struct mutex lock; +}; + +#define XC4000_AUDIO_STD_B 1 +#define XC4000_AUDIO_STD_A2 2 +#define XC4000_AUDIO_STD_K3 4 +#define XC4000_AUDIO_STD_L 8 +#define XC4000_AUDIO_STD_INPUT1 16 +#define XC4000_AUDIO_STD_MONO 32 + +#define XC4000_DEFAULT_FIRMWARE "dvb-fe-xc4000-1.4.fw" + +/* Misc Defines */ +#define MAX_TV_STANDARD 24 +#define XC_MAX_I2C_WRITE_LENGTH 64 +#define XC_POWERED_DOWN 0x80000000U + +/* Signal Types */ +#define XC_RF_MODE_AIR 0 +#define XC_RF_MODE_CABLE 1 + +/* Product id */ +#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000 +#define XC_PRODUCT_ID_XC4000 0x0FA0 +#define XC_PRODUCT_ID_XC4100 0x1004 + +/* Registers (Write-only) */ +#define XREG_INIT 0x00 +#define XREG_VIDEO_MODE 0x01 +#define XREG_AUDIO_MODE 0x02 +#define XREG_RF_FREQ 0x03 +#define XREG_D_CODE 0x04 +#define XREG_DIRECTSITTING_MODE 0x05 +#define XREG_SEEK_MODE 0x06 +#define XREG_POWER_DOWN 0x08 +#define XREG_SIGNALSOURCE 0x0A +#define XREG_SMOOTHEDCVBS 0x0E +#define XREG_AMPLITUDE 0x10 + +/* Registers (Read-only) */ +#define XREG_ADC_ENV 0x00 +#define XREG_QUALITY 0x01 +#define XREG_FRAME_LINES 0x02 +#define XREG_HSYNC_FREQ 0x03 +#define XREG_LOCK 0x04 +#define XREG_FREQ_ERROR 0x05 +#define XREG_SNR 0x06 +#define XREG_VERSION 0x07 +#define XREG_PRODUCT_ID 0x08 + +/* + Basic firmware description. This will remain with + the driver for documentation purposes. + + This represents an I2C firmware file encoded as a + string of unsigned char. Format is as follows: + + char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB + char[1 ]=len0_LSB -> length of first write transaction + char[2 ]=data0 -> first byte to be sent + char[3 ]=data1 + char[4 ]=data2 + char[ ]=... + char[M ]=dataN -> last byte to be sent + char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB + char[M+2]=len1_LSB -> length of second write transaction + char[M+3]=data0 + char[M+4]=data1 + ... + etc. + + The [len] value should be interpreted as follows: + + len= len_MSB _ len_LSB + len=1111_1111_1111_1111 : End of I2C_SEQUENCE + len=0000_0000_0000_0000 : Reset command: Do hardware reset + len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767) + len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms + + For the RESET and WAIT commands, the two following bytes will contain + immediately the length of the following transaction. +*/ + +struct XC_TV_STANDARD { + const char *Name; + u16 audio_mode; + u16 video_mode; + u16 int_freq; +}; + +/* Tuner standards */ +#define XC4000_MN_NTSC_PAL_BTSC 0 +#define XC4000_MN_NTSC_PAL_A2 1 +#define XC4000_MN_NTSC_PAL_EIAJ 2 +#define XC4000_MN_NTSC_PAL_Mono 3 +#define XC4000_BG_PAL_A2 4 +#define XC4000_BG_PAL_NICAM 5 +#define XC4000_BG_PAL_MONO 6 +#define XC4000_I_PAL_NICAM 7 +#define XC4000_I_PAL_NICAM_MONO 8 +#define XC4000_DK_PAL_A2 9 +#define XC4000_DK_PAL_NICAM 10 +#define XC4000_DK_PAL_MONO 11 +#define XC4000_DK_SECAM_A2DK1 12 +#define XC4000_DK_SECAM_A2LDK3 13 +#define XC4000_DK_SECAM_A2MONO 14 +#define XC4000_DK_SECAM_NICAM 15 +#define XC4000_L_SECAM_NICAM 16 +#define XC4000_LC_SECAM_NICAM 17 +#define XC4000_DTV6 18 +#define XC4000_DTV8 19 +#define XC4000_DTV7_8 20 +#define XC4000_DTV7 21 +#define XC4000_FM_Radio_INPUT2 22 +#define XC4000_FM_Radio_INPUT1 23 + +static struct XC_TV_STANDARD xc4000_standard[MAX_TV_STANDARD] = { + {"M/N-NTSC/PAL-BTSC", 0x0000, 0x80A0, 4500}, + {"M/N-NTSC/PAL-A2", 0x0000, 0x80A0, 4600}, + {"M/N-NTSC/PAL-EIAJ", 0x0040, 0x80A0, 4500}, + {"M/N-NTSC/PAL-Mono", 0x0078, 0x80A0, 4500}, + {"B/G-PAL-A2", 0x0000, 0x8159, 5640}, + {"B/G-PAL-NICAM", 0x0004, 0x8159, 5740}, + {"B/G-PAL-MONO", 0x0078, 0x8159, 5500}, + {"I-PAL-NICAM", 0x0080, 0x8049, 6240}, + {"I-PAL-NICAM-MONO", 0x0078, 0x8049, 6000}, + {"D/K-PAL-A2", 0x0000, 0x8049, 6380}, + {"D/K-PAL-NICAM", 0x0080, 0x8049, 6200}, + {"D/K-PAL-MONO", 0x0078, 0x8049, 6500}, + {"D/K-SECAM-A2 DK1", 0x0000, 0x8049, 6340}, + {"D/K-SECAM-A2 L/DK3", 0x0000, 0x8049, 6000}, + {"D/K-SECAM-A2 MONO", 0x0078, 0x8049, 6500}, + {"D/K-SECAM-NICAM", 0x0080, 0x8049, 6200}, + {"L-SECAM-NICAM", 0x8080, 0x0009, 6200}, + {"L'-SECAM-NICAM", 0x8080, 0x4009, 6200}, + {"DTV6", 0x00C0, 0x8002, 0}, + {"DTV8", 0x00C0, 0x800B, 0}, + {"DTV7/8", 0x00C0, 0x801B, 0}, + {"DTV7", 0x00C0, 0x8007, 0}, + {"FM Radio-INPUT2", 0x0008, 0x9800, 10700}, + {"FM Radio-INPUT1", 0x0008, 0x9000, 10700} +}; + +static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val); +static int xc4000_tuner_reset(struct dvb_frontend *fe); +static void xc_debug_dump(struct xc4000_priv *priv); + +static int xc_send_i2c_data(struct xc4000_priv *priv, u8 *buf, int len) +{ + struct i2c_msg msg = { .addr = priv->i2c_props.addr, + .flags = 0, .buf = buf, .len = len }; + if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { + if (priv->ignore_i2c_write_errors == 0) { + printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n", + len); + if (len == 4) { + printk(KERN_ERR "bytes %02x %02x %02x %02x\n", buf[0], + buf[1], buf[2], buf[3]); + } + return -EREMOTEIO; + } + } + return 0; +} + +static int xc4000_tuner_reset(struct dvb_frontend *fe) +{ + struct xc4000_priv *priv = fe->tuner_priv; + int ret; + + dprintk(1, "%s()\n", __func__); + + if (fe->callback) { + ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : + priv->i2c_props.adap->algo_data, + DVB_FRONTEND_COMPONENT_TUNER, + XC4000_TUNER_RESET, 0); + if (ret) { + printk(KERN_ERR "xc4000: reset failed\n"); + return -EREMOTEIO; + } + } else { + printk(KERN_ERR "xc4000: no tuner reset callback function, " + "fatal\n"); + return -EINVAL; + } + return 0; +} + +static int xc_write_reg(struct xc4000_priv *priv, u16 regAddr, u16 i2cData) +{ + u8 buf[4]; + int result; + + buf[0] = (regAddr >> 8) & 0xFF; + buf[1] = regAddr & 0xFF; + buf[2] = (i2cData >> 8) & 0xFF; + buf[3] = i2cData & 0xFF; + result = xc_send_i2c_data(priv, buf, 4); + + return result; +} + +static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) +{ + struct xc4000_priv *priv = fe->tuner_priv; + + int i, nbytes_to_send, result; + unsigned int len, pos, index; + u8 buf[XC_MAX_I2C_WRITE_LENGTH]; + + index = 0; + while ((i2c_sequence[index] != 0xFF) || + (i2c_sequence[index + 1] != 0xFF)) { + len = i2c_sequence[index] * 256 + i2c_sequence[index+1]; + if (len == 0x0000) { + /* RESET command */ + /* NOTE: this is ignored, as the reset callback was */ + /* already called by check_firmware() */ + index += 2; + } else if (len & 0x8000) { + /* WAIT command */ + msleep(len & 0x7FFF); + index += 2; + } else { + /* Send i2c data whilst ensuring individual transactions + * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes. + */ + index += 2; + buf[0] = i2c_sequence[index]; + buf[1] = i2c_sequence[index + 1]; + pos = 2; + while (pos < len) { + if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) + nbytes_to_send = + XC_MAX_I2C_WRITE_LENGTH; + else + nbytes_to_send = (len - pos + 2); + for (i = 2; i < nbytes_to_send; i++) { + buf[i] = i2c_sequence[index + pos + + i - 2]; + } + result = xc_send_i2c_data(priv, buf, + nbytes_to_send); + + if (result != 0) + return result; + + pos += nbytes_to_send - 2; + } + index += len; + } + } + return 0; +} + +static int xc_set_tv_standard(struct xc4000_priv *priv, + u16 video_mode, u16 audio_mode) +{ + int ret; + dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode); + dprintk(1, "%s() Standard = %s\n", + __func__, + xc4000_standard[priv->video_standard].Name); + + /* Don't complain when the request fails because of i2c stretching */ + priv->ignore_i2c_write_errors = 1; + + ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode); + if (ret == 0) + ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode); + + priv->ignore_i2c_write_errors = 0; + + return ret; +} + +static int xc_set_signal_source(struct xc4000_priv *priv, u16 rf_mode) +{ + dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, + rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); + + if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) { + rf_mode = XC_RF_MODE_CABLE; + printk(KERN_ERR + "%s(), Invalid mode, defaulting to CABLE", + __func__); + } + return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); +} + +static const struct dvb_tuner_ops xc4000_tuner_ops; + +static int xc_set_rf_frequency(struct xc4000_priv *priv, u32 freq_hz) +{ + u16 freq_code; + + dprintk(1, "%s(%u)\n", __func__, freq_hz); + + if ((freq_hz > xc4000_tuner_ops.info.frequency_max) || + (freq_hz < xc4000_tuner_ops.info.frequency_min)) + return -EINVAL; + + freq_code = (u16)(freq_hz / 15625); + + /* WAS: Starting in firmware version 1.1.44, Xceive recommends using the + FINERFREQ for all normal tuning (the doc indicates reg 0x03 should + only be used for fast scanning for channel lock) */ + /* WAS: XREG_FINERFREQ */ + return xc_write_reg(priv, XREG_RF_FREQ, freq_code); +} + +static int xc_get_adc_envelope(struct xc4000_priv *priv, u16 *adc_envelope) +{ + return xc4000_readreg(priv, XREG_ADC_ENV, adc_envelope); +} + +static int xc_get_frequency_error(struct xc4000_priv *priv, u32 *freq_error_hz) +{ + int result; + u16 regData; + u32 tmp; + + result = xc4000_readreg(priv, XREG_FREQ_ERROR, ®Data); + if (result != 0) + return result; + + tmp = (u32)regData & 0xFFFFU; + tmp = (tmp < 0x8000U ? tmp : 0x10000U - tmp); + (*freq_error_hz) = tmp * 15625; + return result; +} + +static int xc_get_lock_status(struct xc4000_priv *priv, u16 *lock_status) +{ + return xc4000_readreg(priv, XREG_LOCK, lock_status); +} + +static int xc_get_version(struct xc4000_priv *priv, + u8 *hw_majorversion, u8 *hw_minorversion, + u8 *fw_majorversion, u8 *fw_minorversion) +{ + u16 data; + int result; + + result = xc4000_readreg(priv, XREG_VERSION, &data); + if (result != 0) + return result; + + (*hw_majorversion) = (data >> 12) & 0x0F; + (*hw_minorversion) = (data >> 8) & 0x0F; + (*fw_majorversion) = (data >> 4) & 0x0F; + (*fw_minorversion) = data & 0x0F; + + return 0; +} + +static int xc_get_hsync_freq(struct xc4000_priv *priv, u32 *hsync_freq_hz) +{ + u16 regData; + int result; + + result = xc4000_readreg(priv, XREG_HSYNC_FREQ, ®Data); + if (result != 0) + return result; + + (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; + return result; +} + +static int xc_get_frame_lines(struct xc4000_priv *priv, u16 *frame_lines) +{ + return xc4000_readreg(priv, XREG_FRAME_LINES, frame_lines); +} + +static int xc_get_quality(struct xc4000_priv *priv, u16 *quality) +{ + return xc4000_readreg(priv, XREG_QUALITY, quality); +} + +static u16 xc_wait_for_lock(struct xc4000_priv *priv) +{ + u16 lock_state = 0; + int watchdog_count = 40; + + while ((lock_state == 0) && (watchdog_count > 0)) { + xc_get_lock_status(priv, &lock_state); + if (lock_state != 1) { + msleep(5); + watchdog_count--; + } + } + return lock_state; +} + +static int xc_tune_channel(struct xc4000_priv *priv, u32 freq_hz) +{ + int found = 1; + int result; + + dprintk(1, "%s(%u)\n", __func__, freq_hz); + + /* Don't complain when the request fails because of i2c stretching */ + priv->ignore_i2c_write_errors = 1; + result = xc_set_rf_frequency(priv, freq_hz); + priv->ignore_i2c_write_errors = 0; + + if (result != 0) + return 0; + + /* wait for lock only in analog TV mode */ + if ((priv->cur_fw.type & (FM | DTV6 | DTV7 | DTV78 | DTV8)) == 0) { + if (xc_wait_for_lock(priv) != 1) + found = 0; + } + + /* Wait for stats to stabilize. + * Frame Lines needs two frame times after initial lock + * before it is valid. + */ + msleep(debug ? 100 : 10); + + if (debug) + xc_debug_dump(priv); + + return found; +} + +static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val) +{ + u8 buf[2] = { reg >> 8, reg & 0xff }; + u8 bval[2] = { 0, 0 }; + struct i2c_msg msg[2] = { + { .addr = priv->i2c_props.addr, + .flags = 0, .buf = &buf[0], .len = 2 }, + { .addr = priv->i2c_props.addr, + .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, + }; + + if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) { + printk(KERN_ERR "xc4000: I2C read failed\n"); + return -EREMOTEIO; + } + + *val = (bval[0] << 8) | bval[1]; + return 0; +} + +#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0) +static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) +{ + if (type & BASE) + printk(KERN_CONT "BASE "); + if (type & INIT1) + printk(KERN_CONT "INIT1 "); + if (type & F8MHZ) + printk(KERN_CONT "F8MHZ "); + if (type & MTS) + printk(KERN_CONT "MTS "); + if (type & D2620) + printk(KERN_CONT "D2620 "); + if (type & D2633) + printk(KERN_CONT "D2633 "); + if (type & DTV6) + printk(KERN_CONT "DTV6 "); + if (type & QAM) + printk(KERN_CONT "QAM "); + if (type & DTV7) + printk(KERN_CONT "DTV7 "); + if (type & DTV78) + printk(KERN_CONT "DTV78 "); + if (type & DTV8) + printk(KERN_CONT "DTV8 "); + if (type & FM) + printk(KERN_CONT "FM "); + if (type & INPUT1) + printk(KERN_CONT "INPUT1 "); + if (type & LCD) + printk(KERN_CONT "LCD "); + if (type & NOGD) + printk(KERN_CONT "NOGD "); + if (type & MONO) + printk(KERN_CONT "MONO "); + if (type & ATSC) + printk(KERN_CONT "ATSC "); + if (type & IF) + printk(KERN_CONT "IF "); + if (type & LG60) + printk(KERN_CONT "LG60 "); + if (type & ATI638) + printk(KERN_CONT "ATI638 "); + if (type & OREN538) + printk(KERN_CONT "OREN538 "); + if (type & OREN36) + printk(KERN_CONT "OREN36 "); + if (type & TOYOTA388) + printk(KERN_CONT "TOYOTA388 "); + if (type & TOYOTA794) + printk(KERN_CONT "TOYOTA794 "); + if (type & DIBCOM52) + printk(KERN_CONT "DIBCOM52 "); + if (type & ZARLINK456) + printk(KERN_CONT "ZARLINK456 "); + if (type & CHINA) + printk(KERN_CONT "CHINA "); + if (type & F6MHZ) + printk(KERN_CONT "F6MHZ "); + if (type & INPUT2) + printk(KERN_CONT "INPUT2 "); + if (type & SCODE) + printk(KERN_CONT "SCODE "); + if (type & HAS_IF) + printk(KERN_CONT "HAS_IF_%d ", int_freq); +} + +static int seek_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id) +{ + struct xc4000_priv *priv = fe->tuner_priv; + int i, best_i = -1; + unsigned int best_nr_diffs = 255U; + + if (!priv->firm) { + printk(KERN_ERR "Error! firmware not loaded\n"); + return -EINVAL; + } + + if (((type & ~SCODE) == 0) && (*id == 0)) + *id = V4L2_STD_PAL; + + /* Seek for generic video standard match */ + for (i = 0; i < priv->firm_size; i++) { + v4l2_std_id id_diff_mask = + (priv->firm[i].id ^ (*id)) & (*id); + unsigned int type_diff_mask = + (priv->firm[i].type ^ type) + & (BASE_TYPES | DTV_TYPES | LCD | NOGD | MONO | SCODE); + unsigned int nr_diffs; + + if (type_diff_mask + & (BASE | INIT1 | FM | DTV6 | DTV7 | DTV78 | DTV8 | SCODE)) + continue; + + nr_diffs = hweight64(id_diff_mask) + hweight32(type_diff_mask); + if (!nr_diffs) /* Supports all the requested standards */ + goto found; + + if (nr_diffs < best_nr_diffs) { + best_nr_diffs = nr_diffs; + best_i = i; + } + } + + /* FIXME: Would make sense to seek for type "hint" match ? */ + if (best_i < 0) { + i = -ENOENT; + goto ret; + } + + if (best_nr_diffs > 0U) { + printk(KERN_WARNING + "Selecting best matching firmware (%u bits differ) for " + "type=(%x), id %016llx:\n", + best_nr_diffs, type, (unsigned long long)*id); + i = best_i; + } + +found: + *id = priv->firm[i].id; + +ret: + if (debug) { + printk(KERN_DEBUG "%s firmware for type=", + (i < 0) ? "Can't find" : "Found"); + dump_firm_type(type); + printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id); + } + return i; +} + +static int load_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id) +{ + struct xc4000_priv *priv = fe->tuner_priv; + int pos, rc; + unsigned char *p; + + pos = seek_firmware(fe, type, id); + if (pos < 0) + return pos; + + p = priv->firm[pos].ptr; + + /* Don't complain when the request fails because of i2c stretching */ + priv->ignore_i2c_write_errors = 1; + + rc = xc_load_i2c_sequence(fe, p); + + priv->ignore_i2c_write_errors = 0; + + return rc; +} + +static int xc4000_fwupload(struct dvb_frontend *fe) +{ + struct xc4000_priv *priv = fe->tuner_priv; + const struct firmware *fw = NULL; + const unsigned char *p, *endp; + int rc = 0; + int n, n_array; + char name[33]; + const char *fname; + + if (firmware_name[0] != '\0') + fname = firmware_name; + else + fname = XC4000_DEFAULT_FIRMWARE; + + dprintk(1, "Reading firmware %s\n", fname); + rc = request_firmware(&fw, fname, priv->i2c_props.adap->dev.parent); + if (rc < 0) { + if (rc == -ENOENT) + printk(KERN_ERR "Error: firmware %s not found.\n", fname); + else + printk(KERN_ERR "Error %d while requesting firmware %s\n", + rc, fname); + + return rc; + } + p = fw->data; + endp = p + fw->size; + + if (fw->size < sizeof(name) - 1 + 2 + 2) { + printk(KERN_ERR "Error: firmware file %s has invalid size!\n", + fname); + goto corrupt; + } + + memcpy(name, p, sizeof(name) - 1); + name[sizeof(name) - 1] = '\0'; + p += sizeof(name) - 1; + + priv->firm_version = get_unaligned_le16(p); + p += 2; + + n_array = get_unaligned_le16(p); + p += 2; + + dprintk(1, "Loading %d firmware images from %s, type: %s, ver %d.%d\n", + n_array, fname, name, + priv->firm_version >> 8, priv->firm_version & 0xff); + + priv->firm = kzalloc(sizeof(*priv->firm) * n_array, GFP_KERNEL); + if (priv->firm == NULL) { + printk(KERN_ERR "Not enough memory to load firmware file.\n"); + rc = -ENOMEM; + goto done; + } + priv->firm_size = n_array; + + n = -1; + while (p < endp) { + __u32 type, size; + v4l2_std_id id; + __u16 int_freq = 0; + + n++; + if (n >= n_array) { + printk(KERN_ERR "More firmware images in file than " + "were expected!\n"); + goto corrupt; + } + + /* Checks if there's enough bytes to read */ + if (endp - p < sizeof(type) + sizeof(id) + sizeof(size)) + goto header; + + type = get_unaligned_le32(p); + p += sizeof(type); + + id = get_unaligned_le64(p); + p += sizeof(id); + + if (type & HAS_IF) { + int_freq = get_unaligned_le16(p); + p += sizeof(int_freq); + if (endp - p < sizeof(size)) + goto header; + } + + size = get_unaligned_le32(p); + p += sizeof(size); + + if (!size || size > endp - p) { + printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%d, expected %d)\n", + type, (unsigned long long)id, + (unsigned)(endp - p), size); + goto corrupt; + } + + priv->firm[n].ptr = kzalloc(size, GFP_KERNEL); + if (priv->firm[n].ptr == NULL) { + printk(KERN_ERR "Not enough memory to load firmware file.\n"); + rc = -ENOMEM; + goto done; + } + + if (debug) { + printk(KERN_DEBUG "Reading firmware type "); + dump_firm_type_and_int_freq(type, int_freq); + printk(KERN_DEBUG "(%x), id %llx, size=%d.\n", + type, (unsigned long long)id, size); + } + + memcpy(priv->firm[n].ptr, p, size); + priv->firm[n].type = type; + priv->firm[n].id = id; + priv->firm[n].size = size; + priv->firm[n].int_freq = int_freq; + + p += size; + } + + if (n + 1 != priv->firm_size) { + printk(KERN_ERR "Firmware file is incomplete!\n"); + goto corrupt; + } + + goto done; + +header: + printk(KERN_ERR "Firmware header is incomplete!\n"); +corrupt: + rc = -EINVAL; + printk(KERN_ERR "Error: firmware file is corrupted!\n"); + +done: + release_firmware(fw); + if (rc == 0) + dprintk(1, "Firmware files loaded.\n"); + + return rc; +} + +static int load_scode(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id *id, __u16 int_freq, int scode) +{ + struct xc4000_priv *priv = fe->tuner_priv; + int pos, rc; + unsigned char *p; + u8 scode_buf[13]; + u8 indirect_mode[5]; + + dprintk(1, "%s called int_freq=%d\n", __func__, int_freq); + + if (!int_freq) { + pos = seek_firmware(fe, type, id); + if (pos < 0) + return pos; + } else { + for (pos = 0; pos < priv->firm_size; pos++) { + if ((priv->firm[pos].int_freq == int_freq) && + (priv->firm[pos].type & HAS_IF)) + break; + } + if (pos == priv->firm_size) + return -ENOENT; + } + + p = priv->firm[pos].ptr; + + if (priv->firm[pos].size != 12 * 16 || scode >= 16) + return -EINVAL; + p += 12 * scode; + + if (debug) { + tuner_info("Loading SCODE for type="); + dump_firm_type_and_int_freq(priv->firm[pos].type, + priv->firm[pos].int_freq); + printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type, + (unsigned long long)*id); + } + + scode_buf[0] = 0x00; + memcpy(&scode_buf[1], p, 12); + + /* Enter direct-mode */ + rc = xc_write_reg(priv, XREG_DIRECTSITTING_MODE, 0); + if (rc < 0) { + printk(KERN_ERR "failed to put device into direct mode!\n"); + return -EIO; + } + + rc = xc_send_i2c_data(priv, scode_buf, 13); + if (rc != 0) { + /* Even if the send failed, make sure we set back to indirect + mode */ + printk(KERN_ERR "Failed to set scode %d\n", rc); + } + + /* Switch back to indirect-mode */ + memset(indirect_mode, 0, sizeof(indirect_mode)); + indirect_mode[4] = 0x88; + xc_send_i2c_data(priv, indirect_mode, sizeof(indirect_mode)); + msleep(10); + + return 0; +} + +static int check_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id std, __u16 int_freq) +{ + struct xc4000_priv *priv = fe->tuner_priv; + struct firmware_properties new_fw; + int rc = 0, is_retry = 0; + u16 hwmodel; + v4l2_std_id std0; + u8 hw_major, hw_minor, fw_major, fw_minor; + + dprintk(1, "%s called\n", __func__); + + if (!priv->firm) { + rc = xc4000_fwupload(fe); + if (rc < 0) + return rc; + } + +retry: + new_fw.type = type; + new_fw.id = std; + new_fw.std_req = std; + new_fw.scode_table = SCODE; + new_fw.scode_nr = 0; + new_fw.int_freq = int_freq; + + dprintk(1, "checking firmware, user requested type="); + if (debug) { + dump_firm_type(new_fw.type); + printk(KERN_CONT "(%x), id %016llx, ", new_fw.type, + (unsigned long long)new_fw.std_req); + if (!int_freq) + printk(KERN_CONT "scode_tbl "); + else + printk(KERN_CONT "int_freq %d, ", new_fw.int_freq); + printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr); + } + + /* No need to reload base firmware if it matches */ + if (priv->cur_fw.type & BASE) { + dprintk(1, "BASE firmware not changed.\n"); + goto skip_base; + } + + /* Updating BASE - forget about all currently loaded firmware */ + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + + /* Reset is needed before loading firmware */ + rc = xc4000_tuner_reset(fe); + if (rc < 0) + goto fail; + + /* BASE firmwares are all std0 */ + std0 = 0; + rc = load_firmware(fe, BASE, &std0); + if (rc < 0) { + printk(KERN_ERR "Error %d while loading base firmware\n", rc); + goto fail; + } + + /* Load INIT1, if needed */ + dprintk(1, "Load init1 firmware, if exists\n"); + + rc = load_firmware(fe, BASE | INIT1, &std0); + if (rc == -ENOENT) + rc = load_firmware(fe, BASE | INIT1, &std0); + if (rc < 0 && rc != -ENOENT) { + tuner_err("Error %d while loading init1 firmware\n", + rc); + goto fail; + } + +skip_base: + /* + * No need to reload standard specific firmware if base firmware + * was not reloaded and requested video standards have not changed. + */ + if (priv->cur_fw.type == (BASE | new_fw.type) && + priv->cur_fw.std_req == std) { + dprintk(1, "Std-specific firmware already loaded.\n"); + goto skip_std_specific; + } + + /* Reloading std-specific firmware forces a SCODE update */ + priv->cur_fw.scode_table = 0; + + /* Load the standard firmware */ + rc = load_firmware(fe, new_fw.type, &new_fw.id); + + if (rc < 0) + goto fail; + +skip_std_specific: + if (priv->cur_fw.scode_table == new_fw.scode_table && + priv->cur_fw.scode_nr == new_fw.scode_nr) { + dprintk(1, "SCODE firmware already loaded.\n"); + goto check_device; + } + + /* Load SCODE firmware, if exists */ + rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id, + new_fw.int_freq, new_fw.scode_nr); + if (rc != 0) + dprintk(1, "load scode failed %d\n", rc); + +check_device: + rc = xc4000_readreg(priv, XREG_PRODUCT_ID, &hwmodel); + + if (xc_get_version(priv, &hw_major, &hw_minor, &fw_major, + &fw_minor) != 0) { + printk(KERN_ERR "Unable to read tuner registers.\n"); + goto fail; + } + + dprintk(1, "Device is Xceive %d version %d.%d, " + "firmware version %d.%d\n", + hwmodel, hw_major, hw_minor, fw_major, fw_minor); + + /* Check firmware version against what we downloaded. */ + if (priv->firm_version != ((fw_major << 8) | fw_minor)) { + printk(KERN_WARNING + "Incorrect readback of firmware version %d.%d.\n", + fw_major, fw_minor); + goto fail; + } + + /* Check that the tuner hardware model remains consistent over time. */ + if (priv->hwmodel == 0 && + (hwmodel == XC_PRODUCT_ID_XC4000 || + hwmodel == XC_PRODUCT_ID_XC4100)) { + priv->hwmodel = hwmodel; + priv->hwvers = (hw_major << 8) | hw_minor; + } else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel || + priv->hwvers != ((hw_major << 8) | hw_minor)) { + printk(KERN_WARNING + "Read invalid device hardware information - tuner " + "hung?\n"); + goto fail; + } + + memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw)); + + /* + * By setting BASE in cur_fw.type only after successfully loading all + * firmwares, we can: + * 1. Identify that BASE firmware with type=0 has been loaded; + * 2. Tell whether BASE firmware was just changed the next time through. + */ + priv->cur_fw.type |= BASE; + + return 0; + +fail: + memset(&priv->cur_fw, 0, sizeof(priv->cur_fw)); + if (!is_retry) { + msleep(50); + is_retry = 1; + dprintk(1, "Retrying firmware load\n"); + goto retry; + } + + if (rc == -ENOENT) + rc = -EINVAL; + return rc; +} + +static void xc_debug_dump(struct xc4000_priv *priv) +{ + u16 adc_envelope; + u32 freq_error_hz = 0; + u16 lock_status; + u32 hsync_freq_hz = 0; + u16 frame_lines; + u16 quality; + u8 hw_majorversion = 0, hw_minorversion = 0; + u8 fw_majorversion = 0, fw_minorversion = 0; + + xc_get_adc_envelope(priv, &adc_envelope); + dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope); + + xc_get_frequency_error(priv, &freq_error_hz); + dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz); + + xc_get_lock_status(priv, &lock_status); + dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n", + lock_status); + + xc_get_version(priv, &hw_majorversion, &hw_minorversion, + &fw_majorversion, &fw_minorversion); + dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n", + hw_majorversion, hw_minorversion, + fw_majorversion, fw_minorversion); + + if (priv->video_standard < XC4000_DTV6) { + xc_get_hsync_freq(priv, &hsync_freq_hz); + dprintk(1, "*** Horizontal sync frequency = %d Hz\n", + hsync_freq_hz); + + xc_get_frame_lines(priv, &frame_lines); + dprintk(1, "*** Frame lines = %d\n", frame_lines); + } + + xc_get_quality(priv, &quality); + dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); +} + +static int xc4000_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct xc4000_priv *priv = fe->tuner_priv; + unsigned int type; + int ret = -EREMOTEIO; + + dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); + + mutex_lock(&priv->lock); + + if (fe->ops.info.type == FE_ATSC) { + dprintk(1, "%s() ATSC\n", __func__); + switch (params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + dprintk(1, "%s() VSB modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_AIR; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = XC4000_DTV6; + type = DTV6; + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk(1, "%s() QAM modulation\n", __func__); + priv->rf_mode = XC_RF_MODE_CABLE; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = XC4000_DTV6; + type = DTV6; + break; + default: + ret = -EINVAL; + goto fail; + } + } else if (fe->ops.info.type == FE_OFDM) { + dprintk(1, "%s() OFDM\n", __func__); + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = XC4000_DTV6; + priv->freq_hz = params->frequency - 1750000; + type = DTV6; + break; + case BANDWIDTH_7_MHZ: + priv->bandwidth = BANDWIDTH_7_MHZ; + priv->video_standard = XC4000_DTV7; + priv->freq_hz = params->frequency - 2250000; + type = DTV7; + break; + case BANDWIDTH_8_MHZ: + priv->bandwidth = BANDWIDTH_8_MHZ; + priv->video_standard = XC4000_DTV8; + priv->freq_hz = params->frequency - 2750000; + type = DTV8; + break; + case BANDWIDTH_AUTO: + if (params->frequency < 400000000) { + priv->bandwidth = BANDWIDTH_7_MHZ; + priv->freq_hz = params->frequency - 2250000; + } else { + priv->bandwidth = BANDWIDTH_8_MHZ; + priv->freq_hz = params->frequency - 2750000; + } + priv->video_standard = XC4000_DTV7_8; + type = DTV78; + break; + default: + printk(KERN_ERR "xc4000 bandwidth not set!\n"); + ret = -EINVAL; + goto fail; + } + priv->rf_mode = XC_RF_MODE_AIR; + } else { + printk(KERN_ERR "xc4000 modulation type not supported!\n"); + ret = -EINVAL; + goto fail; + } + + dprintk(1, "%s() frequency=%d (compensated)\n", + __func__, priv->freq_hz); + + /* Make sure the correct firmware type is loaded */ + if (check_firmware(fe, type, 0, priv->if_khz) != 0) + goto fail; + + ret = xc_set_signal_source(priv, priv->rf_mode); + if (ret != 0) { + printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n", + priv->rf_mode); + goto fail; + } else { + u16 video_mode, audio_mode; + video_mode = xc4000_standard[priv->video_standard].video_mode; + audio_mode = xc4000_standard[priv->video_standard].audio_mode; + if (type == DTV6 && priv->firm_version != 0x0102) + video_mode |= 0x0001; + ret = xc_set_tv_standard(priv, video_mode, audio_mode); + if (ret != 0) { + printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n"); + /* DJH - do not return when it fails... */ + /* goto fail; */ + } + } + + if (xc_write_reg(priv, XREG_D_CODE, 0) == 0) + ret = 0; + if (priv->dvb_amplitude != 0) { + if (xc_write_reg(priv, XREG_AMPLITUDE, + (priv->firm_version != 0x0102 || + priv->dvb_amplitude != 134 ? + priv->dvb_amplitude : 132)) != 0) + ret = -EREMOTEIO; + } + if (priv->set_smoothedcvbs != 0) { + if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0) + ret = -EREMOTEIO; + } + if (ret != 0) { + printk(KERN_ERR "xc4000: setting registers failed\n"); + /* goto fail; */ + } + + xc_tune_channel(priv, priv->freq_hz); + + ret = 0; + +fail: + mutex_unlock(&priv->lock); + + return ret; +} + +static int xc4000_set_analog_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct xc4000_priv *priv = fe->tuner_priv; + unsigned int type = 0; + int ret = -EREMOTEIO; + + if (params->mode == V4L2_TUNER_RADIO) { + dprintk(1, "%s() frequency=%d (in units of 62.5Hz)\n", + __func__, params->frequency); + + mutex_lock(&priv->lock); + + params->std = 0; + priv->freq_hz = params->frequency * 125L / 2; + + if (audio_std & XC4000_AUDIO_STD_INPUT1) { + priv->video_standard = XC4000_FM_Radio_INPUT1; + type = FM | INPUT1; + } else { + priv->video_standard = XC4000_FM_Radio_INPUT2; + type = FM | INPUT2; + } + + goto tune_channel; + } + + dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", + __func__, params->frequency); + + mutex_lock(&priv->lock); + + /* params->frequency is in units of 62.5khz */ + priv->freq_hz = params->frequency * 62500; + + params->std &= V4L2_STD_ALL; + /* if std is not defined, choose one */ + if (!params->std) + params->std = V4L2_STD_PAL_BG; + + if (audio_std & XC4000_AUDIO_STD_MONO) + type = MONO; + + if (params->std & V4L2_STD_MN) { + params->std = V4L2_STD_MN; + if (audio_std & XC4000_AUDIO_STD_MONO) { + priv->video_standard = XC4000_MN_NTSC_PAL_Mono; + } else if (audio_std & XC4000_AUDIO_STD_A2) { + params->std |= V4L2_STD_A2; + priv->video_standard = XC4000_MN_NTSC_PAL_A2; + } else { + params->std |= V4L2_STD_BTSC; + priv->video_standard = XC4000_MN_NTSC_PAL_BTSC; + } + goto tune_channel; + } + + if (params->std & V4L2_STD_PAL_BG) { + params->std = V4L2_STD_PAL_BG; + if (audio_std & XC4000_AUDIO_STD_MONO) { + priv->video_standard = XC4000_BG_PAL_MONO; + } else if (!(audio_std & XC4000_AUDIO_STD_A2)) { + if (!(audio_std & XC4000_AUDIO_STD_B)) { + params->std |= V4L2_STD_NICAM_A; + priv->video_standard = XC4000_BG_PAL_NICAM; + } else { + params->std |= V4L2_STD_NICAM_B; + priv->video_standard = XC4000_BG_PAL_NICAM; + } + } else { + if (!(audio_std & XC4000_AUDIO_STD_B)) { + params->std |= V4L2_STD_A2_A; + priv->video_standard = XC4000_BG_PAL_A2; + } else { + params->std |= V4L2_STD_A2_B; + priv->video_standard = XC4000_BG_PAL_A2; + } + } + goto tune_channel; + } + + if (params->std & V4L2_STD_PAL_I) { + /* default to NICAM audio standard */ + params->std = V4L2_STD_PAL_I | V4L2_STD_NICAM; + if (audio_std & XC4000_AUDIO_STD_MONO) + priv->video_standard = XC4000_I_PAL_NICAM_MONO; + else + priv->video_standard = XC4000_I_PAL_NICAM; + goto tune_channel; + } + + if (params->std & V4L2_STD_PAL_DK) { + params->std = V4L2_STD_PAL_DK; + if (audio_std & XC4000_AUDIO_STD_MONO) { + priv->video_standard = XC4000_DK_PAL_MONO; + } else if (audio_std & XC4000_AUDIO_STD_A2) { + params->std |= V4L2_STD_A2; + priv->video_standard = XC4000_DK_PAL_A2; + } else { + params->std |= V4L2_STD_NICAM; + priv->video_standard = XC4000_DK_PAL_NICAM; + } + goto tune_channel; + } + + if (params->std & V4L2_STD_SECAM_DK) { + /* default to A2 audio standard */ + params->std = V4L2_STD_SECAM_DK | V4L2_STD_A2; + if (audio_std & XC4000_AUDIO_STD_L) { + type = 0; + priv->video_standard = XC4000_DK_SECAM_NICAM; + } else if (audio_std & XC4000_AUDIO_STD_MONO) { + priv->video_standard = XC4000_DK_SECAM_A2MONO; + } else if (audio_std & XC4000_AUDIO_STD_K3) { + params->std |= V4L2_STD_SECAM_K3; + priv->video_standard = XC4000_DK_SECAM_A2LDK3; + } else { + priv->video_standard = XC4000_DK_SECAM_A2DK1; + } + goto tune_channel; + } + + if (params->std & V4L2_STD_SECAM_L) { + /* default to NICAM audio standard */ + type = 0; + params->std = V4L2_STD_SECAM_L | V4L2_STD_NICAM; + priv->video_standard = XC4000_L_SECAM_NICAM; + goto tune_channel; + } + + if (params->std & V4L2_STD_SECAM_LC) { + /* default to NICAM audio standard */ + type = 0; + params->std = V4L2_STD_SECAM_LC | V4L2_STD_NICAM; + priv->video_standard = XC4000_LC_SECAM_NICAM; + goto tune_channel; + } + +tune_channel: + /* FIXME: it could be air. */ + priv->rf_mode = XC_RF_MODE_CABLE; + + if (check_firmware(fe, type, params->std, + xc4000_standard[priv->video_standard].int_freq) != 0) + goto fail; + + ret = xc_set_signal_source(priv, priv->rf_mode); + if (ret != 0) { + printk(KERN_ERR + "xc4000: xc_set_signal_source(%d) failed\n", + priv->rf_mode); + goto fail; + } else { + u16 video_mode, audio_mode; + video_mode = xc4000_standard[priv->video_standard].video_mode; + audio_mode = xc4000_standard[priv->video_standard].audio_mode; + if (priv->video_standard < XC4000_BG_PAL_A2) { + if (type & NOGD) + video_mode &= 0xFF7F; + } else if (priv->video_standard < XC4000_I_PAL_NICAM) { + if (priv->firm_version == 0x0102) + video_mode &= 0xFEFF; + if (audio_std & XC4000_AUDIO_STD_B) + video_mode |= 0x0080; + } + ret = xc_set_tv_standard(priv, video_mode, audio_mode); + if (ret != 0) { + printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n"); + goto fail; + } + } + + if (xc_write_reg(priv, XREG_D_CODE, 0) == 0) + ret = 0; + if (xc_write_reg(priv, XREG_AMPLITUDE, 1) != 0) + ret = -EREMOTEIO; + if (priv->set_smoothedcvbs != 0) { + if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0) + ret = -EREMOTEIO; + } + if (ret != 0) { + printk(KERN_ERR "xc4000: setting registers failed\n"); + goto fail; + } + + xc_tune_channel(priv, priv->freq_hz); + + ret = 0; + +fail: + mutex_unlock(&priv->lock); + + return ret; +} + +static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq) +{ + struct xc4000_priv *priv = fe->tuner_priv; + + *freq = priv->freq_hz; + + if (debug) { + mutex_lock(&priv->lock); + if ((priv->cur_fw.type + & (BASE | FM | DTV6 | DTV7 | DTV78 | DTV8)) == BASE) { + u16 snr = 0; + if (xc4000_readreg(priv, XREG_SNR, &snr) == 0) { + mutex_unlock(&priv->lock); + dprintk(1, "%s() freq = %u, SNR = %d\n", + __func__, *freq, snr); + return 0; + } + } + mutex_unlock(&priv->lock); + } + + dprintk(1, "%s()\n", __func__); + + return 0; +} + +static int xc4000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) +{ + struct xc4000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + + *bw = priv->bandwidth; + return 0; +} + +static int xc4000_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct xc4000_priv *priv = fe->tuner_priv; + u16 lock_status = 0; + + mutex_lock(&priv->lock); + + if (priv->cur_fw.type & BASE) + xc_get_lock_status(priv, &lock_status); + + *status = (lock_status == 1 ? + TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO : 0); + if (priv->cur_fw.type & (DTV6 | DTV7 | DTV78 | DTV8)) + *status &= (~TUNER_STATUS_STEREO); + + mutex_unlock(&priv->lock); + + dprintk(2, "%s() lock_status = %d\n", __func__, lock_status); + + return 0; +} + +static int xc4000_sleep(struct dvb_frontend *fe) +{ + struct xc4000_priv *priv = fe->tuner_priv; + int ret = 0; + + dprintk(1, "%s()\n", __func__); + + mutex_lock(&priv->lock); + + /* Avoid firmware reload on slow devices */ + if ((no_poweroff == 2 || + (no_poweroff == 0 && priv->default_pm != 0)) && + (priv->cur_fw.type & BASE) != 0) { + /* force reset and firmware reload */ + priv->cur_fw.type = XC_POWERED_DOWN; + + if (xc_write_reg(priv, XREG_POWER_DOWN, 0) != 0) { + printk(KERN_ERR + "xc4000: %s() unable to shutdown tuner\n", + __func__); + ret = -EREMOTEIO; + } + msleep(20); + } + + mutex_unlock(&priv->lock); + + return ret; +} + +static int xc4000_init(struct dvb_frontend *fe) +{ + dprintk(1, "%s()\n", __func__); + + return 0; +} + +static int xc4000_release(struct dvb_frontend *fe) +{ + struct xc4000_priv *priv = fe->tuner_priv; + + dprintk(1, "%s()\n", __func__); + + mutex_lock(&xc4000_list_mutex); + + if (priv) + hybrid_tuner_release_state(priv); + + mutex_unlock(&xc4000_list_mutex); + + fe->tuner_priv = NULL; + + return 0; +} + +static const struct dvb_tuner_ops xc4000_tuner_ops = { + .info = { + .name = "Xceive XC4000", + .frequency_min = 1000000, + .frequency_max = 1023000000, + .frequency_step = 50000, + }, + + .release = xc4000_release, + .init = xc4000_init, + .sleep = xc4000_sleep, + + .set_params = xc4000_set_params, + .set_analog_params = xc4000_set_analog_params, + .get_frequency = xc4000_get_frequency, + .get_bandwidth = xc4000_get_bandwidth, + .get_status = xc4000_get_status +}; + +struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc4000_config *cfg) +{ + struct xc4000_priv *priv = NULL; + int instance; + u16 id = 0; + + dprintk(1, "%s(%d-%04x)\n", __func__, + i2c ? i2c_adapter_id(i2c) : -1, + cfg ? cfg->i2c_address : -1); + + mutex_lock(&xc4000_list_mutex); + + instance = hybrid_tuner_request_state(struct xc4000_priv, priv, + hybrid_tuner_instance_list, + i2c, cfg->i2c_address, "xc4000"); + switch (instance) { + case 0: + goto fail; + break; + case 1: + /* new tuner instance */ + priv->bandwidth = BANDWIDTH_6_MHZ; + /* set default configuration */ + priv->if_khz = 4560; + priv->default_pm = 0; + priv->dvb_amplitude = 134; + priv->set_smoothedcvbs = 1; + mutex_init(&priv->lock); + fe->tuner_priv = priv; + break; + default: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } + + if (cfg->if_khz != 0) { + /* copy configuration if provided by the caller */ + priv->if_khz = cfg->if_khz; + priv->default_pm = cfg->default_pm; + priv->dvb_amplitude = cfg->dvb_amplitude; + priv->set_smoothedcvbs = cfg->set_smoothedcvbs; + } + + /* Check if firmware has been loaded. It is possible that another + instance of the driver has loaded the firmware. + */ + + if (instance == 1) { + if (xc4000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) + goto fail; + } else { + id = ((priv->cur_fw.type & BASE) != 0 ? + priv->hwmodel : XC_PRODUCT_ID_FW_NOT_LOADED); + } + + switch (id) { + case XC_PRODUCT_ID_XC4000: + case XC_PRODUCT_ID_XC4100: + printk(KERN_INFO + "xc4000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc4000: Firmware has been loaded previously\n"); + break; + case XC_PRODUCT_ID_FW_NOT_LOADED: + printk(KERN_INFO + "xc4000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc4000: Firmware has not been loaded previously\n"); + break; + default: + printk(KERN_ERR + "xc4000: Device not found at addr 0x%02x (0x%x)\n", + cfg->i2c_address, id); + goto fail; + } + + mutex_unlock(&xc4000_list_mutex); + + memcpy(&fe->ops.tuner_ops, &xc4000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + if (instance == 1) { + int ret; + mutex_lock(&priv->lock); + ret = xc4000_fwupload(fe); + mutex_unlock(&priv->lock); + if (ret != 0) + goto fail2; + } + + return fe; +fail: + mutex_unlock(&xc4000_list_mutex); +fail2: + xc4000_release(fe); + return NULL; +} +EXPORT_SYMBOL(xc4000_attach); + +MODULE_AUTHOR("Steven Toth, Davide Ferri"); +MODULE_DESCRIPTION("Xceive xc4000 silicon tuner driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/common/tuners/xc4000.h b/drivers/media/common/tuners/xc4000.h new file mode 100644 index 0000000..e6a44d1 --- /dev/null +++ b/drivers/media/common/tuners/xc4000.h @@ -0,0 +1,67 @@ +/* + * Driver for Xceive XC4000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __XC4000_H__ +#define __XC4000_H__ + +#include <linux/firmware.h> + +struct dvb_frontend; +struct i2c_adapter; + +struct xc4000_config { + u8 i2c_address; + /* if non-zero, power management is enabled by default */ + u8 default_pm; + /* value to be written to XREG_AMPLITUDE in DVB-T mode (0: no write) */ + u8 dvb_amplitude; + /* if non-zero, register 0x0E is set to filter analog TV video output */ + u8 set_smoothedcvbs; + /* IF for DVB-T */ + u32 if_khz; +}; + +/* xc4000 callback command */ +#define XC4000_TUNER_RESET 0 + +/* For each bridge framework, when it attaches either analog or digital, + * it has to store a reference back to its _core equivalent structure, + * so that it can service the hardware by steering gpio's etc. + * Each bridge implementation is different so cast devptr accordingly. + * The xc4000 driver cares not for this value, other than ensuring + * it's passed back to a bridge during tuner_callback(). + */ + +#if defined(CONFIG_MEDIA_TUNER_XC4000) || (defined(CONFIG_MEDIA_TUNER_XC4000_MODULE) && defined(MODULE)) +extern struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc4000_config *cfg); +#else +static inline struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc4000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index ee214c3..f6e40b3 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -80,6 +80,10 @@ comment "Supported nGene Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/ngene/Kconfig" +comment "Supported ddbridge ('Octopus') Adapters" + depends on DVB_CORE && PCI && I2C + source "drivers/media/dvb/ddbridge/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index a1a0875..b2cefe6 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -15,6 +15,7 @@ obj-y := dvb-core/ \ dm1105/ \ pt1/ \ mantis/ \ - ngene/ + ngene/ \ + ddbridge/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index 1e1106d..521d691 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -892,7 +892,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub) if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) { printk("dvb_bt8xx: no pci device for card %d\n", card->bttv_nr); kfree(card); - return -EFAULT; + return -ENODEV; } if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) { @@ -902,7 +902,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub) "installed, try removing it.\n"); kfree(card); - return -EFAULT; + return -ENODEV; } mutex_init(&card->bt->gpio_lock); diff --git a/drivers/media/dvb/ddbridge/Kconfig b/drivers/media/dvb/ddbridge/Kconfig new file mode 100644 index 0000000..d099e1a --- /dev/null +++ b/drivers/media/dvb/ddbridge/Kconfig @@ -0,0 +1,18 @@ +config DVB_DDBRIDGE + tristate "Digital Devices bridge support" + depends on DVB_CORE && PCI && I2C + select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_STV6110x if !DVB_FE_CUSTOMISE + select DVB_STV090x if !DVB_FE_CUSTOMISE + select DVB_DRXK if !DVB_FE_CUSTOMISE + select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE + ---help--- + Support for cards with the Digital Devices PCI express bridge: + - Octopus PCIe Bridge + - Octopus mini PCIe Bridge + - Octopus LE + - DuoFlex S2 Octopus + - DuoFlex CT Octopus + - cineS2(v6) + + Say Y if you own such a card and want to use it. diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile new file mode 100644 index 0000000..de4fe19 --- /dev/null +++ b/drivers/media/dvb/ddbridge/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for the ddbridge device driver +# + +ddbridge-objs := ddbridge-core.o + +obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/ +EXTRA_CFLAGS += -Idrivers/media/common/tuners/ + +# For the staging CI driver cxd2099 +EXTRA_CFLAGS += -Idrivers/staging/cxd2099/ diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c new file mode 100644 index 0000000..573d540 --- /dev/null +++ b/drivers/media/dvb/ddbridge/ddbridge-core.c @@ -0,0 +1,1719 @@ +/* + * ddbridge.c: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/poll.h> +#include <linux/io.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/timer.h> +#include <linux/version.h> +#include <linux/i2c.h> +#include <linux/swab.h> +#include <linux/vmalloc.h> +#include "ddbridge.h" + +#include "ddbridge-regs.h" + +#include "tda18271c2dd.h" +#include "stv6110x.h" +#include "stv090x.h" +#include "lnbh24.h" +#include "drxk.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* MSI had problems with lost interrupts, fixed but needs testing */ +#undef CONFIG_PCI_MSI + +/******************************************************************************/ + +static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val) +{ + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = ®, .len = 1 }, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr, + u16 reg, u8 *val) +{ + u8 msg[2] = {reg>>8, reg&0xff}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2}, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd) +{ + struct ddb *dev = i2c->dev; + int stat; + u32 val; + + i2c->done = 0; + ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND); + stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ); + if (stat <= 0) { + printk(KERN_ERR "I2C timeout\n"); + { /* MSI debugging*/ + u32 istat = ddbreadl(INTERRUPT_STATUS); + printk(KERN_ERR "IRS %08x\n", istat); + ddbwritel(istat, INTERRUPT_ACK); + } + return -EIO; + } + val = ddbreadl(i2c->regs+I2C_COMMAND); + if (val & 0x70000) + return -EIO; + return 0; +} + +static int ddb_i2c_master_xfer(struct i2c_adapter *adapter, + struct i2c_msg msg[], int num) +{ + struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter); + struct ddb *dev = i2c->dev; + u8 addr = 0; + + if (num) + addr = msg[0].addr; + + if (num == 2 && msg[1].flags & I2C_M_RD && + !(msg[0].flags & I2C_M_RD)) { + memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf, + msg[0].buf, msg[0].len); + ddbwritel(msg[0].len|(msg[1].len << 16), + i2c->regs+I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 1)) { + memcpy_fromio(msg[1].buf, + dev->regs + I2C_TASKMEM_BASE + i2c->rbuf, + msg[1].len); + return num; + } + } + + if (num == 1 && !(msg[0].flags & I2C_M_RD)) { + ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len); + ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 2)) + return num; + } + if (num == 1 && (msg[0].flags & I2C_M_RD)) { + ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH); + if (!ddb_i2c_cmd(i2c, addr, 3)) { + ddbcpyfrom(msg[0].buf, + I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len); + return num; + } + } + return -EIO; +} + + +static u32 ddb_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +struct i2c_algorithm ddb_i2c_algo = { + .master_xfer = ddb_i2c_master_xfer, + .functionality = ddb_i2c_functionality, +}; + +static void ddb_i2c_release(struct ddb *dev) +{ + int i; + struct ddb_i2c *i2c; + struct i2c_adapter *adap; + + for (i = 0; i < dev->info->port_num; i++) { + i2c = &dev->i2c[i]; + adap = &i2c->adap; + i2c_del_adapter(adap); + } +} + +static int ddb_i2c_init(struct ddb *dev) +{ + int i, j, stat = 0; + struct ddb_i2c *i2c; + struct i2c_adapter *adap; + + for (i = 0; i < dev->info->port_num; i++) { + i2c = &dev->i2c[i]; + i2c->dev = dev; + i2c->nr = i; + i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4); + i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8); + i2c->regs = 0x80 + i * 0x20; + ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING); + ddbwritel((i2c->rbuf << 16) | i2c->wbuf, + i2c->regs + I2C_TASKADDRESS); + init_waitqueue_head(&i2c->wq); + + adap = &i2c->adap; + i2c_set_adapdata(adap, i2c); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG; +#else +#ifdef I2C_CLASS_TV_ANALOG + adap->class = I2C_CLASS_TV_ANALOG; +#endif +#endif + strcpy(adap->name, "ddbridge"); + adap->algo = &ddb_i2c_algo; + adap->algo_data = (void *)i2c; + adap->dev.parent = &dev->pdev->dev; + stat = i2c_add_adapter(adap); + if (stat) + break; + } + if (stat) + for (j = 0; j < i; j++) { + i2c = &dev->i2c[j]; + adap = &i2c->adap; + i2c_del_adapter(adap); + } + return stat; +} + + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +#if 0 +static void set_table(struct ddb *dev, u32 off, + dma_addr_t *pbuf, u32 num) +{ + u32 i, base; + u64 mem; + + base = DMA_BASE_ADDRESS_TABLE + off; + for (i = 0; i < num; i++) { + mem = pbuf[i]; + ddbwritel(mem & 0xffffffff, base + i * 8); + ddbwritel(mem >> 32, base + i * 8 + 4); + } +} +#endif + +static void ddb_address_table(struct ddb *dev) +{ + u32 i, j, base; + u64 mem; + dma_addr_t *pbuf; + + for (i = 0; i < dev->info->port_num * 2; i++) { + base = DMA_BASE_ADDRESS_TABLE + i * 0x100; + pbuf = dev->input[i].pbuf; + for (j = 0; j < dev->input[i].dma_buf_num; j++) { + mem = pbuf[j]; + ddbwritel(mem & 0xffffffff, base + j * 8); + ddbwritel(mem >> 32, base + j * 8 + 4); + } + } + for (i = 0; i < dev->info->port_num; i++) { + base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100; + pbuf = dev->output[i].pbuf; + for (j = 0; j < dev->output[i].dma_buf_num; j++) { + mem = pbuf[j]; + ddbwritel(mem & 0xffffffff, base + j * 8); + ddbwritel(mem >> 32, base + j * 8 + 4); + } + } +} + +static void io_free(struct pci_dev *pdev, u8 **vbuf, + dma_addr_t *pbuf, u32 size, int num) +{ + int i; + + for (i = 0; i < num; i++) { + if (vbuf[i]) { + pci_free_consistent(pdev, size, vbuf[i], pbuf[i]); + vbuf[i] = 0; + } + } +} + +static int io_alloc(struct pci_dev *pdev, u8 **vbuf, + dma_addr_t *pbuf, u32 size, int num) +{ + int i; + + for (i = 0; i < num; i++) { + vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]); + if (!vbuf[i]) + return -ENOMEM; + } + return 0; +} + +static int ddb_buffers_alloc(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + switch (port->class) { + case DDB_PORT_TUNER: + if (io_alloc(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num) < 0) + return -1; + if (io_alloc(dev->pdev, port->input[1]->vbuf, + port->input[1]->pbuf, + port->input[1]->dma_buf_size, + port->input[1]->dma_buf_num) < 0) + return -1; + break; + case DDB_PORT_CI: + if (io_alloc(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num) < 0) + return -1; + if (io_alloc(dev->pdev, port->output->vbuf, + port->output->pbuf, + port->output->dma_buf_size, + port->output->dma_buf_num) < 0) + return -1; + break; + default: + break; + } + } + ddb_address_table(dev); + return 0; +} + +static void ddb_buffers_free(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + io_free(dev->pdev, port->input[0]->vbuf, + port->input[0]->pbuf, + port->input[0]->dma_buf_size, + port->input[0]->dma_buf_num); + io_free(dev->pdev, port->input[1]->vbuf, + port->input[1]->pbuf, + port->input[1]->dma_buf_size, + port->input[1]->dma_buf_num); + io_free(dev->pdev, port->output->vbuf, + port->output->pbuf, + port->output->dma_buf_size, + port->output->dma_buf_num); + } +} + +static void ddb_input_start(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + + spin_lock_irq(&input->lock); + input->cbuf = 0; + input->coff = 0; + + /* reset */ + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + ddbwritel(2, TS_INPUT_CONTROL(input->nr)); + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + + ddbwritel((1 << 16) | + (input->dma_buf_num << 11) | + (input->dma_buf_size >> 7), + DMA_BUFFER_SIZE(input->nr)); + ddbwritel(0, DMA_BUFFER_ACK(input->nr)); + + ddbwritel(1, DMA_BASE_WRITE); + ddbwritel(3, DMA_BUFFER_CONTROL(input->nr)); + ddbwritel(9, TS_INPUT_CONTROL(input->nr)); + input->running = 1; + spin_unlock_irq(&input->lock); +} + +static void ddb_input_stop(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + + spin_lock_irq(&input->lock); + ddbwritel(0, TS_INPUT_CONTROL(input->nr)); + ddbwritel(0, DMA_BUFFER_CONTROL(input->nr)); + input->running = 0; + spin_unlock_irq(&input->lock); +} + +static void ddb_output_start(struct ddb_output *output) +{ + struct ddb *dev = output->port->dev; + + spin_lock_irq(&output->lock); + output->cbuf = 0; + output->coff = 0; + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(2, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel((1 << 16) | + (output->dma_buf_num << 11) | + (output->dma_buf_size >> 7), + DMA_BUFFER_SIZE(output->nr + 8)); + ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8)); + + ddbwritel(1, DMA_BASE_READ); + ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8)); + /* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */ + ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr)); + output->running = 1; + spin_unlock_irq(&output->lock); +} + +static void ddb_output_stop(struct ddb_output *output) +{ + struct ddb *dev = output->port->dev; + + spin_lock_irq(&output->lock); + ddbwritel(0, TS_OUTPUT_CONTROL(output->nr)); + ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8)); + output->running = 0; + spin_unlock_irq(&output->lock); +} + +static u32 ddb_output_free(struct ddb_output *output) +{ + u32 idx, off, stat = output->stat; + s32 diff; + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + if (output->cbuf != idx) { + if ((((output->cbuf + 1) % output->dma_buf_num) == idx) && + (output->dma_buf_size - output->coff <= 188)) + return 0; + return 188; + } + diff = off - output->coff; + if (diff <= 0 || diff > 188) + return 188; + return 0; +} + +static ssize_t ddb_output_write(struct ddb_output *output, + const u8 *buf, size_t count) +{ + struct ddb *dev = output->port->dev; + u32 idx, off, stat = output->stat; + u32 left = count, len; + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + while (left) { + len = output->dma_buf_size - output->coff; + if ((((output->cbuf + 1) % output->dma_buf_num) == idx) && + (off == 0)) { + if (len <= 188) + break; + len -= 188; + } + if (output->cbuf == idx) { + if (off > output->coff) { +#if 1 + len = off - output->coff; + len -= (len % 188); + if (len <= 188) + +#endif + break; + len -= 188; + } + } + if (len > left) + len = left; + if (copy_from_user(output->vbuf[output->cbuf] + output->coff, + buf, len)) + return -EIO; + left -= len; + buf += len; + output->coff += len; + if (output->coff == output->dma_buf_size) { + output->coff = 0; + output->cbuf = ((output->cbuf + 1) % output->dma_buf_num); + } + ddbwritel((output->cbuf << 11) | (output->coff >> 7), + DMA_BUFFER_ACK(output->nr + 8)); + } + return count - left; +} + +static u32 ddb_input_avail(struct ddb_input *input) +{ + struct ddb *dev = input->port->dev; + u32 idx, off, stat = input->stat; + u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr)); + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + if (ctrl & 4) { + printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl); + ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr)); + return 0; + } + if (input->cbuf != idx) + return 188; + return 0; +} + +static size_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count) +{ + struct ddb *dev = input->port->dev; + u32 left = count; + u32 idx, off, free, stat = input->stat; + int ret; + + idx = (stat >> 11) & 0x1f; + off = (stat & 0x7ff) << 7; + + while (left) { + if (input->cbuf == idx) + return count - left; + free = input->dma_buf_size - input->coff; + if (free > left) + free = left; + ret = copy_to_user(buf, input->vbuf[input->cbuf] + + input->coff, free); + input->coff += free; + if (input->coff == input->dma_buf_size) { + input->coff = 0; + input->cbuf = (input->cbuf+1) % input->dma_buf_num; + } + left -= free; + ddbwritel((input->cbuf << 11) | (input->coff >> 7), + DMA_BUFFER_ACK(input->nr)); + } + return count; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +#if 0 +static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe) +{ + int i; + + for (i = 0; i < dev->info->port_num * 2; i++) { + if (dev->input[i].fe == fe) + return &dev->input[i]; + } + return NULL; +} +#endif + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct ddb_input *input = fe->sec_priv; + struct ddb_port *port = input->port; + int status; + + if (enable) { + mutex_lock(&port->i2c_gate_lock); + status = input->gate_ctrl(fe, 1); + } else { + status = input->gate_ctrl(fe, 0); + mutex_unlock(&port->i2c_gate_lock); + } + return status; +} + +static int demod_attach_drxk(struct ddb_input *input) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct dvb_frontend *fe; + struct drxk_config config; + + memset(&config, 0, sizeof(config)); + config.adr = 0x29 + (input->nr & 1); + + fe = input->fe = dvb_attach(drxk_attach, &config, i2c, &input->fe2); + if (!input->fe) { + printk(KERN_ERR "No DRXK found!\n"); + return -ENODEV; + } + fe->sec_priv = input; + input->gate_ctrl = fe->ops.i2c_gate_ctrl; + fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + return 0; +} + +static int tuner_attach_tda18271(struct ddb_input *input) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct dvb_frontend *fe; + + if (input->fe->ops.i2c_gate_ctrl) + input->fe->ops.i2c_gate_ctrl(input->fe, 1); + fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60); + if (!fe) { + printk(KERN_ERR "No TDA18271 found!\n"); + return -ENODEV; + } + if (input->fe->ops.i2c_gate_ctrl) + input->fe->ops.i2c_gate_ctrl(input->fe, 0); + return 0; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static struct stv090x_config stv0900 = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x69, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, +}; + +static struct stv090x_config stv0900_aa = { + .device = STV0900, + .demod_mode = STV090x_DUAL, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 27000000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + .ts2_mode = STV090x_TSMODE_SERIAL_PUNCTURED, + + .repeater_level = STV090x_RPTLEVEL_16, + + .adc1_range = STV090x_ADC_1Vpp, + .adc2_range = STV090x_ADC_1Vpp, + + .diseqc_envelope_mode = true, +}; + +static struct stv6110x_config stv6110a = { + .addr = 0x60, + .refclk = 27000000, + .clk_div = 1, +}; + +static struct stv6110x_config stv6110b = { + .addr = 0x63, + .refclk = 27000000, + .clk_div = 1, +}; + +static int demod_attach_stv0900(struct ddb_input *input, int type) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; + + input->fe = dvb_attach(stv090x_attach, feconf, i2c, + (input->nr & 1) ? STV090x_DEMODULATOR_1 + : STV090x_DEMODULATOR_0); + if (!input->fe) { + printk(KERN_ERR "No STV0900 found!\n"); + return -ENODEV; + } + if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0, + 0, (input->nr & 1) ? + (0x09 - type) : (0x0b - type))) { + printk(KERN_ERR "No LNBH24 found!\n"); + return -ENODEV; + } + return 0; +} + +static int tuner_attach_stv6110(struct ddb_input *input, int type) +{ + struct i2c_adapter *i2c = &input->port->i2c->adap; + struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900; + struct stv6110x_config *tunerconf = (input->nr & 1) ? + &stv6110b : &stv6110a; + struct stv6110x_devctl *ctl; + + ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c); + if (!ctl) { + printk(KERN_ERR "No STV6110X found!\n"); + return -ENODEV; + } + printk(KERN_INFO "attach tuner input %d adr %02x\n", + input->nr, tunerconf->addr); + + feconf->tuner_init = ctl->tuner_init; + feconf->tuner_sleep = ctl->tuner_sleep; + feconf->tuner_set_mode = ctl->tuner_set_mode; + feconf->tuner_set_frequency = ctl->tuner_set_frequency; + feconf->tuner_get_frequency = ctl->tuner_get_frequency; + feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth; + feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth; + feconf->tuner_set_bbgain = ctl->tuner_set_bbgain; + feconf->tuner_get_bbgain = ctl->tuner_get_bbgain; + feconf->tuner_set_refclk = ctl->tuner_set_refclk; + feconf->tuner_get_status = ctl->tuner_get_status; + + return 0; +} + +static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id, + int (*start_feed)(struct dvb_demux_feed *), + int (*stop_feed)(struct dvb_demux_feed *), + void *priv) +{ + dvbdemux->priv = priv; + + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = start_feed; + dvbdemux->stop_feed = stop_feed; + dvbdemux->write_to_decoder = NULL; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING); + return dvb_dmx_init(dvbdemux); +} + +static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev, + struct dvb_demux *dvbdemux, + struct dmx_frontend *hw_frontend, + struct dmx_frontend *mem_frontend, + struct dvb_adapter *dvb_adapter) +{ + int ret; + + dmxdev->filternum = 256; + dmxdev->demux = &dvbdemux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adapter); + if (ret < 0) + return ret; + + hw_frontend->source = DMX_FRONTEND_0; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend); + mem_frontend->source = DMX_MEMORY_FE; + dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend); + return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend); +} + +static int start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ddb_input *input = dvbdmx->priv; + + if (!input->users) + ddb_input_start(input); + + return ++input->users; +} + +static int stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct ddb_input *input = dvbdmx->priv; + + if (--input->users) + return input->users; + + ddb_input_stop(input); + return 0; +} + + +static void dvb_input_detach(struct ddb_input *input) +{ + struct dvb_adapter *adap = &input->adap; + struct dvb_demux *dvbdemux = &input->demux; + + switch (input->attached) { + case 5: + if (input->fe2) + dvb_unregister_frontend(input->fe2); + if (input->fe) { + dvb_unregister_frontend(input->fe); + dvb_frontend_detach(input->fe); + input->fe = NULL; + } + case 4: + dvb_net_release(&input->dvbnet); + + case 3: + dvbdemux->dmx.close(&dvbdemux->dmx); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &input->hw_frontend); + dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, + &input->mem_frontend); + dvb_dmxdev_release(&input->dmxdev); + + case 2: + dvb_dmx_release(&input->demux); + + case 1: + dvb_unregister_adapter(adap); + } + input->attached = 0; +} + +static int dvb_input_attach(struct ddb_input *input) +{ + int ret; + struct ddb_port *port = input->port; + struct dvb_adapter *adap = &input->adap; + struct dvb_demux *dvbdemux = &input->demux; + + ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE, + &input->port->dev->pdev->dev, + adapter_nr); + if (ret < 0) { + printk(KERN_ERR "ddbridge: Could not register adapter." + "Check if you enabled enough adapters in dvb-core!\n"); + return ret; + } + input->attached = 1; + + ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux", + start_feed, + stop_feed, input); + if (ret < 0) + return ret; + input->attached = 2; + + ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux, + &input->hw_frontend, + &input->mem_frontend, adap); + if (ret < 0) + return ret; + input->attached = 3; + + ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux); + if (ret < 0) + return ret; + input->attached = 4; + + input->fe = 0; + switch (port->type) { + case DDB_TUNER_DVBS_ST: + if (demod_attach_stv0900(input, 0) < 0) + return -ENODEV; + if (tuner_attach_stv6110(input, 0) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + break; + case DDB_TUNER_DVBS_ST_AA: + if (demod_attach_stv0900(input, 1) < 0) + return -ENODEV; + if (tuner_attach_stv6110(input, 1) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + break; + case DDB_TUNER_DVBCT_TR: + if (demod_attach_drxk(input) < 0) + return -ENODEV; + if (tuner_attach_tda18271(input) < 0) + return -ENODEV; + if (input->fe) { + if (dvb_register_frontend(adap, input->fe) < 0) + return -ENODEV; + } + if (input->fe2) { + if (dvb_register_frontend(adap, input->fe2) < 0) + return -ENODEV; + input->fe2->tuner_priv = input->fe->tuner_priv; + memcpy(&input->fe2->ops.tuner_ops, + &input->fe->ops.tuner_ops, + sizeof(struct dvb_tuner_ops)); + } + break; + } + input->attached = 5; + return 0; +} + +/****************************************************************************/ +/****************************************************************************/ + +static ssize_t ts_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + size_t left = count; + int stat; + + while (left) { + if (ddb_output_free(output) < 188) { + if (file->f_flags & O_NONBLOCK) + break; + if (wait_event_interruptible( + output->wq, ddb_output_free(output) >= 188) < 0) + break; + } + stat = ddb_output_write(output, buf, left); + if (stat < 0) + break; + buf += stat; + left -= stat; + } + return (left == count) ? -EAGAIN : (count - left); +} + +static ssize_t ts_read(struct file *file, char *buf, + size_t count, loff_t *ppos) +{ + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + struct ddb_input *input = output->port->input[0]; + int left, read; + + count -= count % 188; + left = count; + while (left) { + if (ddb_input_avail(input) < 188) { + if (file->f_flags & O_NONBLOCK) + break; + if (wait_event_interruptible( + input->wq, ddb_input_avail(input) >= 188) < 0) + break; + } + read = ddb_input_read(input, buf, left); + left -= read; + buf += read; + } + return (left == count) ? -EAGAIN : (count - left); +} + +static unsigned int ts_poll(struct file *file, poll_table *wait) +{ + /* + struct dvb_device *dvbdev = file->private_data; + struct ddb_output *output = dvbdev->priv; + struct ddb_input *input = output->port->input[0]; + */ + unsigned int mask = 0; + +#if 0 + if (data_avail_to_read) + mask |= POLLIN | POLLRDNORM; + if (data_avail_to_write) + mask |= POLLOUT | POLLWRNORM; + + poll_wait(file, &read_queue, wait); + poll_wait(file, &write_queue, wait); +#endif + return mask; +} + +static const struct file_operations ci_fops = { + .owner = THIS_MODULE, + .read = ts_read, + .write = ts_write, + .open = dvb_generic_open, + .release = dvb_generic_release, + .poll = ts_poll, + .mmap = 0, +}; + +static struct dvb_device dvbdev_ci = { + .priv = 0, + .readers = -1, + .writers = -1, + .users = -1, + .fops = &ci_fops, +}; + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void input_tasklet(unsigned long data) +{ + struct ddb_input *input = (struct ddb_input *) data; + struct ddb *dev = input->port->dev; + + spin_lock(&input->lock); + if (!input->running) { + spin_unlock(&input->lock); + return; + } + input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr)); + + if (input->port->class == DDB_PORT_TUNER) { + if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr))) + printk(KERN_ERR "Overflow input %d\n", input->nr); + while (input->cbuf != ((input->stat >> 11) & 0x1f) + || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) { + dvb_dmx_swfilter_packets(&input->demux, + input->vbuf[input->cbuf], + input->dma_buf_size / 188); + + input->cbuf = (input->cbuf + 1) % input->dma_buf_num; + ddbwritel((input->cbuf << 11), + DMA_BUFFER_ACK(input->nr)); + input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr)); + } + } + if (input->port->class == DDB_PORT_CI) + wake_up(&input->wq); + spin_unlock(&input->lock); +} + +static void output_tasklet(unsigned long data) +{ + struct ddb_output *output = (struct ddb_output *) data; + struct ddb *dev = output->port->dev; + + spin_lock(&output->lock); + if (!output->running) { + spin_unlock(&output->lock); + return; + } + output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8)); + wake_up(&output->wq); + spin_unlock(&output->lock); +} + + +struct cxd2099_cfg cxd_cfg = { + .bitrate = 62000, + .adr = 0x40, + .polarity = 1, + .clock_mode = 1, +}; + +static int ddb_ci_attach(struct ddb_port *port) +{ + int ret; + + ret = dvb_register_adapter(&port->output->adap, + "DDBridge", + THIS_MODULE, + &port->dev->pdev->dev, + adapter_nr); + if (ret < 0) + return ret; + port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap); + if (!port->en) { + dvb_unregister_adapter(&port->output->adap); + return -ENODEV; + } + ddb_input_start(port->input[0]); + ddb_output_start(port->output); + dvb_ca_en50221_init(&port->output->adap, + port->en, 0, 1); + ret = dvb_register_device(&port->output->adap, &port->output->dev, + &dvbdev_ci, (void *) port->output, + DVB_DEVICE_SEC); + return ret; +} + +static int ddb_port_attach(struct ddb_port *port) +{ + int ret = 0; + + switch (port->class) { + case DDB_PORT_TUNER: + ret = dvb_input_attach(port->input[0]); + if (ret < 0) + break; + ret = dvb_input_attach(port->input[1]); + break; + case DDB_PORT_CI: + ret = ddb_ci_attach(port); + break; + default: + break; + } + if (ret < 0) + printk(KERN_ERR "port_attach on port %d failed\n", port->nr); + return ret; +} + +static int ddb_ports_attach(struct ddb *dev) +{ + int i, ret = 0; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + ret = ddb_port_attach(port); + if (ret < 0) + break; + } + return ret; +} + +static void ddb_ports_detach(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + switch (port->class) { + case DDB_PORT_TUNER: + dvb_input_detach(port->input[0]); + dvb_input_detach(port->input[1]); + break; + case DDB_PORT_CI: + if (port->output->dev) + dvb_unregister_device(port->output->dev); + if (port->en) { + ddb_input_stop(port->input[0]); + ddb_output_stop(port->output); + dvb_ca_en50221_release(port->en); + kfree(port->en); + port->en = 0; + dvb_unregister_adapter(&port->output->adap); + } + break; + } + } +} + +/****************************************************************************/ +/****************************************************************************/ + +static int port_has_ci(struct ddb_port *port) +{ + u8 val; + return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1; +} + +static int port_has_stv0900(struct ddb_port *port) +{ + u8 val; + if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_stv0900_aa(struct ddb_port *port) +{ + u8 val; + if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_drxks(struct ddb_port *port) +{ + u8 val; + if (i2c_read(&port->i2c->adap, 0x29, &val) < 0) + return 0; + if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0) + return 0; + return 1; +} + +static void ddb_port_probe(struct ddb_port *port) +{ + struct ddb *dev = port->dev; + char *modname = "NO MODULE"; + + port->class = DDB_PORT_NONE; + + if (port_has_ci(port)) { + modname = "CI"; + port->class = DDB_PORT_CI; + ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); + } else if (port_has_stv0900(port)) { + modname = "DUAL DVB-S2"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBS_ST; + ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); + } else if (port_has_stv0900_aa(port)) { + modname = "DUAL DVB-S2"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBS_ST_AA; + ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING); + } else if (port_has_drxks(port)) { + modname = "DUAL DVB-C/T"; + port->class = DDB_PORT_TUNER; + port->type = DDB_TUNER_DVBCT_TR; + ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING); + } + printk(KERN_INFO "Port %d (TAB %d): %s\n", + port->nr, port->nr+1, modname); +} + +static void ddb_input_init(struct ddb_port *port, int nr) +{ + struct ddb *dev = port->dev; + struct ddb_input *input = &dev->input[nr]; + + input->nr = nr; + input->port = port; + input->dma_buf_num = INPUT_DMA_BUFS; + input->dma_buf_size = INPUT_DMA_SIZE; + ddbwritel(0, TS_INPUT_CONTROL(nr)); + ddbwritel(2, TS_INPUT_CONTROL(nr)); + ddbwritel(0, TS_INPUT_CONTROL(nr)); + ddbwritel(0, DMA_BUFFER_ACK(nr)); + tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input); + spin_lock_init(&input->lock); + init_waitqueue_head(&input->wq); +} + +static void ddb_output_init(struct ddb_port *port, int nr) +{ + struct ddb *dev = port->dev; + struct ddb_output *output = &dev->output[nr]; + output->nr = nr; + output->port = port; + output->dma_buf_num = OUTPUT_DMA_BUFS; + output->dma_buf_size = OUTPUT_DMA_SIZE; + + ddbwritel(0, TS_OUTPUT_CONTROL(nr)); + ddbwritel(2, TS_OUTPUT_CONTROL(nr)); + ddbwritel(0, TS_OUTPUT_CONTROL(nr)); + tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output); + init_waitqueue_head(&output->wq); +} + +static void ddb_ports_init(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + port->dev = dev; + port->nr = i; + port->i2c = &dev->i2c[i]; + port->input[0] = &dev->input[2 * i]; + port->input[1] = &dev->input[2 * i + 1]; + port->output = &dev->output[i]; + + mutex_init(&port->i2c_gate_lock); + ddb_port_probe(port); + ddb_input_init(port, 2 * i); + ddb_input_init(port, 2 * i + 1); + ddb_output_init(port, i); + } +} + +static void ddb_ports_release(struct ddb *dev) +{ + int i; + struct ddb_port *port; + + for (i = 0; i < dev->info->port_num; i++) { + port = &dev->port[i]; + port->dev = dev; + tasklet_kill(&port->input[0]->tasklet); + tasklet_kill(&port->input[1]->tasklet); + tasklet_kill(&port->output->tasklet); + } +} + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void irq_handle_i2c(struct ddb *dev, int n) +{ + struct ddb_i2c *i2c = &dev->i2c[n]; + + i2c->done = 1; + wake_up(&i2c->wq); +} + +static irqreturn_t irq_handler(int irq, void *dev_id) +{ + struct ddb *dev = (struct ddb *) dev_id; + u32 s = ddbreadl(INTERRUPT_STATUS); + + if (!s) + return IRQ_NONE; + + do { + ddbwritel(s, INTERRUPT_ACK); + + if (s & 0x00000001) + irq_handle_i2c(dev, 0); + if (s & 0x00000002) + irq_handle_i2c(dev, 1); + if (s & 0x00000004) + irq_handle_i2c(dev, 2); + if (s & 0x00000008) + irq_handle_i2c(dev, 3); + + if (s & 0x00000100) + tasklet_schedule(&dev->input[0].tasklet); + if (s & 0x00000200) + tasklet_schedule(&dev->input[1].tasklet); + if (s & 0x00000400) + tasklet_schedule(&dev->input[2].tasklet); + if (s & 0x00000800) + tasklet_schedule(&dev->input[3].tasklet); + if (s & 0x00001000) + tasklet_schedule(&dev->input[4].tasklet); + if (s & 0x00002000) + tasklet_schedule(&dev->input[5].tasklet); + if (s & 0x00004000) + tasklet_schedule(&dev->input[6].tasklet); + if (s & 0x00008000) + tasklet_schedule(&dev->input[7].tasklet); + + if (s & 0x00010000) + tasklet_schedule(&dev->output[0].tasklet); + if (s & 0x00020000) + tasklet_schedule(&dev->output[1].tasklet); + if (s & 0x00040000) + tasklet_schedule(&dev->output[2].tasklet); + if (s & 0x00080000) + tasklet_schedule(&dev->output[3].tasklet); + + /* if (s & 0x000f0000) printk(KERN_DEBUG "%08x\n", istat); */ + } while ((s = ddbreadl(INTERRUPT_STATUS))); + + return IRQ_HANDLED; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen) +{ + u32 data, shift; + + if (wlen > 4) + ddbwritel(1, SPI_CONTROL); + while (wlen > 4) { + /* FIXME: check for big-endian */ + data = swab32(*(u32 *)wbuf); + wbuf += 4; + wlen -= 4; + ddbwritel(data, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + } + + if (rlen) + ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL); + else + ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL); + + data = 0; + shift = ((4 - wlen) * 8); + while (wlen) { + data <<= 8; + data |= *wbuf; + wlen--; + wbuf++; + } + if (shift) + data <<= shift; + ddbwritel(data, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + + if (!rlen) { + ddbwritel(0, SPI_CONTROL); + return 0; + } + if (rlen > 4) + ddbwritel(1, SPI_CONTROL); + + while (rlen > 4) { + ddbwritel(0xffffffff, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + data = ddbreadl(SPI_DATA); + *(u32 *) rbuf = swab32(data); + rbuf += 4; + rlen -= 4; + } + ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL); + ddbwritel(0xffffffff, SPI_DATA); + while (ddbreadl(SPI_CONTROL) & 0x0004) + ; + + data = ddbreadl(SPI_DATA); + ddbwritel(0, SPI_CONTROL); + + if (rlen < 4) + data <<= ((4 - rlen) * 8); + + while (rlen > 0) { + *rbuf = ((data >> 24) & 0xff); + data <<= 8; + rbuf++; + rlen--; + } + return 0; +} + +#define DDB_MAGIC 'd' + +struct ddb_flashio { + __u8 *write_buf; + __u32 write_len; + __u8 *read_buf; + __u32 read_len; +}; + +#define IOCTL_DDB_FLASHIO _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio) + +#define DDB_NAME "ddbridge" + +static u32 ddb_num; +static struct ddb *ddbs[32]; +static struct class *ddb_class; +static int ddb_major; + +static int ddb_open(struct inode *inode, struct file *file) +{ + struct ddb *dev = ddbs[iminor(inode)]; + + file->private_data = dev; + return 0; +} + +static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct ddb *dev = file->private_data; + void *parg = (void *)arg; + int res = -EFAULT; + + switch (cmd) { + case IOCTL_DDB_FLASHIO: + { + struct ddb_flashio fio; + u8 *rbuf, *wbuf; + + if (copy_from_user(&fio, parg, sizeof(fio))) + break; + if (fio.write_len + fio.read_len > 1028) { + printk(KERN_ERR "IOBUF too small\n"); + return -ENOMEM; + } + wbuf = &dev->iobuf[0]; + if (!wbuf) + return -ENOMEM; + rbuf = wbuf + fio.write_len; + if (copy_from_user(wbuf, fio.write_buf, fio.write_len)) { + vfree(wbuf); + break; + } + res = flashio(dev, wbuf, fio.write_len, + rbuf, fio.read_len); + if (copy_to_user(fio.read_buf, rbuf, fio.read_len)) + res = -EFAULT; + break; + } + default: + break; + } + return res; +} + +static const struct file_operations ddb_fops = { + .unlocked_ioctl = ddb_ioctl, + .open = ddb_open, +}; + +static char *ddb_devnode(struct device *device, mode_t *mode) +{ + struct ddb *dev = dev_get_drvdata(device); + + return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr); +} + +static int ddb_class_create(void) +{ + ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops); + if (ddb_major < 0) + return ddb_major; + + ddb_class = class_create(THIS_MODULE, DDB_NAME); + if (IS_ERR(ddb_class)) { + unregister_chrdev(ddb_major, DDB_NAME); + return -1; + } + ddb_class->devnode = ddb_devnode; + return 0; +} + +static void ddb_class_destroy(void) +{ + class_destroy(ddb_class); + unregister_chrdev(ddb_major, DDB_NAME); +} + +static int ddb_device_create(struct ddb *dev) +{ + dev->nr = ddb_num++; + dev->ddb_dev = device_create(ddb_class, NULL, + MKDEV(ddb_major, dev->nr), + dev, "ddbridge%d", dev->nr); + ddbs[dev->nr] = dev; + if (IS_ERR(dev->ddb_dev)) + return -1; + return 0; +} + +static void ddb_device_destroy(struct ddb *dev) +{ + ddb_num--; + if (IS_ERR(dev->ddb_dev)) + return; + device_destroy(ddb_class, MKDEV(ddb_major, 0)); +} + + +/****************************************************************************/ +/****************************************************************************/ +/****************************************************************************/ + +static void ddb_unmap(struct ddb *dev) +{ + if (dev->regs) + iounmap(dev->regs); + vfree(dev); +} + + +static void __devexit ddb_remove(struct pci_dev *pdev) +{ + struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev); + + ddb_ports_detach(dev); + ddb_i2c_release(dev); + + ddbwritel(0, INTERRUPT_ENABLE); + free_irq(dev->pdev->irq, dev); +#ifdef CONFIG_PCI_MSI + if (dev->msi) + pci_disable_msi(dev->pdev); +#endif + ddb_ports_release(dev); + ddb_buffers_free(dev); + ddb_device_destroy(dev); + + ddb_unmap(dev); + pci_set_drvdata(pdev, 0); + pci_disable_device(pdev); +} + + +static int __devinit ddb_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ddb *dev; + int stat = 0; + int irq_flag = IRQF_SHARED; + + if (pci_enable_device(pdev) < 0) + return -ENODEV; + + dev = vmalloc(sizeof(struct ddb)); + if (dev == NULL) + return -ENOMEM; + memset(dev, 0, sizeof(struct ddb)); + + dev->pdev = pdev; + pci_set_drvdata(pdev, dev); + dev->info = (struct ddb_info *) id->driver_data; + printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name); + + dev->regs = ioremap(pci_resource_start(dev->pdev, 0), + pci_resource_len(dev->pdev, 0)); + if (!dev->regs) { + stat = -ENOMEM; + goto fail; + } + printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4)); + +#ifdef CONFIG_PCI_MSI + if (pci_msi_enabled()) + stat = pci_enable_msi(dev->pdev); + if (stat) { + printk(KERN_INFO ": MSI not available.\n"); + } else { + irq_flag = 0; + dev->msi = 1; + } +#endif + stat = request_irq(dev->pdev->irq, irq_handler, + irq_flag, "DDBridge", (void *) dev); + if (stat < 0) + goto fail1; + ddbwritel(0, DMA_BASE_WRITE); + ddbwritel(0, DMA_BASE_READ); + ddbwritel(0xffffffff, INTERRUPT_ACK); + ddbwritel(0xfff0f, INTERRUPT_ENABLE); + ddbwritel(0, MSI1_ENABLE); + + if (ddb_i2c_init(dev) < 0) + goto fail1; + ddb_ports_init(dev); + if (ddb_buffers_alloc(dev) < 0) { + printk(KERN_INFO ": Could not allocate buffer memory\n"); + goto fail2; + } + if (ddb_ports_attach(dev) < 0) + goto fail3; + ddb_device_create(dev); + return 0; + +fail3: + ddb_ports_detach(dev); + printk(KERN_ERR "fail3\n"); + ddb_ports_release(dev); +fail2: + printk(KERN_ERR "fail2\n"); + ddb_buffers_free(dev); +fail1: + printk(KERN_ERR "fail1\n"); + if (dev->msi) + pci_disable_msi(dev->pdev); + free_irq(dev->pdev->irq, dev); +fail: + printk(KERN_ERR "fail\n"); + ddb_unmap(dev); + pci_set_drvdata(pdev, 0); + pci_disable_device(pdev); + return -1; +} + +/******************************************************************************/ +/******************************************************************************/ +/******************************************************************************/ + +static struct ddb_info ddb_none = { + .type = DDB_NONE, + .name = "Digital Devices PCIe bridge", +}; + +static struct ddb_info ddb_octopus = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Octopus DVB adapter", + .port_num = 4, +}; + +static struct ddb_info ddb_octopus_le = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Octopus LE DVB adapter", + .port_num = 2, +}; + +static struct ddb_info ddb_v6 = { + .type = DDB_OCTOPUS, + .name = "Digital Devices Cine S2 V6 DVB adapter", + .port_num = 3, +}; + +#define DDVID 0xdd01 /* Digital Devices Vendor ID */ + +#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) { \ + .vendor = _vend, .device = _dev, \ + .subvendor = _subvend, .subdevice = _subdev, \ + .driver_data = (unsigned long)&_driverdata } + +static const struct pci_device_id ddb_id_tbl[] __devinitdata = { + DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le), + DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus), + DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6), + /* in case sub-ids got deleted in flash */ + DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none), + {0} +}; +MODULE_DEVICE_TABLE(pci, ddb_id_tbl); + + +static struct pci_driver ddb_pci_driver = { + .name = "DDBridge", + .id_table = ddb_id_tbl, + .probe = ddb_probe, + .remove = ddb_remove, +}; + +static __init int module_init_ddbridge(void) +{ + printk(KERN_INFO "Digital Devices PCIE bridge driver, " + "Copyright (C) 2010-11 Digital Devices GmbH\n"); + if (ddb_class_create()) + return -1; + return pci_register_driver(&ddb_pci_driver); +} + +static __exit void module_exit_ddbridge(void) +{ + pci_unregister_driver(&ddb_pci_driver); + ddb_class_destroy(); +} + +module_init(module_init_ddbridge); +module_exit(module_exit_ddbridge); + +MODULE_DESCRIPTION("Digital Devices PCIe Bridge"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.5"); diff --git a/drivers/media/dvb/ddbridge/ddbridge-regs.h b/drivers/media/dvb/ddbridge/ddbridge-regs.h new file mode 100644 index 0000000..a3ccb31 --- /dev/null +++ b/drivers/media/dvb/ddbridge/ddbridge-regs.h @@ -0,0 +1,151 @@ +/* + * ddbridge-regs.h: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */ + +/* Register Definitions */ + +#define CUR_REGISTERMAP_VERSION 0x10000 + +#define HARDWARE_VERSION 0x00 +#define REGISTERMAP_VERSION 0x04 + +/* ------------------------------------------------------------------------- */ +/* SPI Controller */ + +#define SPI_CONTROL 0x10 +#define SPI_DATA 0x14 + +/* ------------------------------------------------------------------------- */ + +/* Interrupt controller */ +/* How many MSI's are available depends on HW (Min 2 max 8) */ +/* How many are usable also depends on Host platform */ + +#define INTERRUPT_BASE (0x40) + +#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00) +#define MSI0_ENABLE (INTERRUPT_BASE + 0x00) +#define MSI1_ENABLE (INTERRUPT_BASE + 0x04) +#define MSI2_ENABLE (INTERRUPT_BASE + 0x08) +#define MSI3_ENABLE (INTERRUPT_BASE + 0x0C) +#define MSI4_ENABLE (INTERRUPT_BASE + 0x10) +#define MSI5_ENABLE (INTERRUPT_BASE + 0x14) +#define MSI6_ENABLE (INTERRUPT_BASE + 0x18) +#define MSI7_ENABLE (INTERRUPT_BASE + 0x1C) + +#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20) +#define INTERRUPT_ACK (INTERRUPT_BASE + 0x20) + +#define INTMASK_I2C1 (0x00000001) +#define INTMASK_I2C2 (0x00000002) +#define INTMASK_I2C3 (0x00000004) +#define INTMASK_I2C4 (0x00000008) + +#define INTMASK_CIRQ1 (0x00000010) +#define INTMASK_CIRQ2 (0x00000020) +#define INTMASK_CIRQ3 (0x00000040) +#define INTMASK_CIRQ4 (0x00000080) + +#define INTMASK_TSINPUT1 (0x00000100) +#define INTMASK_TSINPUT2 (0x00000200) +#define INTMASK_TSINPUT3 (0x00000400) +#define INTMASK_TSINPUT4 (0x00000800) +#define INTMASK_TSINPUT5 (0x00001000) +#define INTMASK_TSINPUT6 (0x00002000) +#define INTMASK_TSINPUT7 (0x00004000) +#define INTMASK_TSINPUT8 (0x00008000) + +#define INTMASK_TSOUTPUT1 (0x00010000) +#define INTMASK_TSOUTPUT2 (0x00020000) +#define INTMASK_TSOUTPUT3 (0x00040000) +#define INTMASK_TSOUTPUT4 (0x00080000) + +/* ------------------------------------------------------------------------- */ +/* I2C Master Controller */ + +#define I2C_BASE (0x80) /* Byte offset */ + +#define I2C_COMMAND (0x00) +#define I2C_TIMING (0x04) +#define I2C_TASKLENGTH (0x08) /* High read, low write */ +#define I2C_TASKADDRESS (0x0C) /* High read, low write */ + +#define I2C_MONITOR (0x1C) + +#define I2C_BASE_1 (I2C_BASE + 0x00) +#define I2C_BASE_2 (I2C_BASE + 0x20) +#define I2C_BASE_3 (I2C_BASE + 0x40) +#define I2C_BASE_4 (I2C_BASE + 0x60) + +#define I2C_BASE_N(i) (I2C_BASE + (i) * 0x20) + +#define I2C_TASKMEM_BASE (0x1000) /* Byte offset */ +#define I2C_TASKMEM_SIZE (0x1000) + +#define I2C_SPEED_400 (0x04030404) +#define I2C_SPEED_200 (0x09080909) +#define I2C_SPEED_154 (0x0C0B0C0C) +#define I2C_SPEED_100 (0x13121313) +#define I2C_SPEED_77 (0x19181919) +#define I2C_SPEED_50 (0x27262727) + + +/* ------------------------------------------------------------------------- */ +/* DMA Controller */ + +#define DMA_BASE_WRITE (0x100) +#define DMA_BASE_READ (0x140) + +#define DMA_CONTROL (0x00) /* 64 */ +#define DMA_ERROR (0x04) /* 65 ( only read instance ) */ + +#define DMA_DIAG_CONTROL (0x1C) /* 71 */ +#define DMA_DIAG_PACKETCOUNTER_LOW (0x20) /* 72 */ +#define DMA_DIAG_PACKETCOUNTER_HIGH (0x24) /* 73 */ +#define DMA_DIAG_TIMECOUNTER_LOW (0x28) /* 74 */ +#define DMA_DIAG_TIMECOUNTER_HIGH (0x2C) /* 75 */ +#define DMA_DIAG_RECHECKCOUNTER (0x30) /* 76 ( Split completions on read ) */ +#define DMA_DIAG_WAITTIMEOUTINIT (0x34) /* 77 */ +#define DMA_DIAG_WAITOVERFLOWCOUNTER (0x38) /* 78 */ +#define DMA_DIAG_WAITCOUNTER (0x3C) /* 79 */ + +/* ------------------------------------------------------------------------- */ +/* DMA Buffer */ + +#define TS_INPUT_BASE (0x200) +#define TS_INPUT_CONTROL(i) (TS_INPUT_BASE + (i) * 16 + 0x00) + +#define TS_OUTPUT_BASE (0x280) +#define TS_OUTPUT_CONTROL(i) (TS_OUTPUT_BASE + (i) * 16 + 0x00) + +#define DMA_BUFFER_BASE (0x300) + +#define DMA_BUFFER_CONTROL(i) (DMA_BUFFER_BASE + (i) * 16 + 0x00) +#define DMA_BUFFER_ACK(i) (DMA_BUFFER_BASE + (i) * 16 + 0x04) +#define DMA_BUFFER_CURRENT(i) (DMA_BUFFER_BASE + (i) * 16 + 0x08) +#define DMA_BUFFER_SIZE(i) (DMA_BUFFER_BASE + (i) * 16 + 0x0c) + +#define DMA_BASE_ADDRESS_TABLE (0x2000) +#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512) + diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h new file mode 100644 index 0000000..6d14893 --- /dev/null +++ b/drivers/media/dvb/ddbridge/ddbridge.h @@ -0,0 +1,187 @@ +/* + * ddbridge.h: Digital Devices PCIe bridge driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _DDBRIDGE_H_ +#define _DDBRIDGE_H_ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <asm/dma.h> +#include <linux/dvb/frontend.h> +#include <linux/dvb/ca.h> +#include <linux/dvb/video.h> +#include <linux/dvb/audio.h> +#include <linux/socket.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_ringbuffer.h" +#include "dvb_ca_en50221.h" +#include "dvb_net.h" +#include "cxd2099.h" + +#define DDB_MAX_I2C 4 +#define DDB_MAX_PORT 4 +#define DDB_MAX_INPUT 8 +#define DDB_MAX_OUTPUT 4 + +struct ddb_info { + int type; +#define DDB_NONE 0 +#define DDB_OCTOPUS 1 + char *name; + int port_num; + u32 port_type[DDB_MAX_PORT]; +}; + +/* DMA_SIZE MUST be divisible by 188 and 128 !!! */ + +#define INPUT_DMA_MAX_BUFS 32 /* hardware table limit */ +#define INPUT_DMA_BUFS 8 +#define INPUT_DMA_SIZE (128*47*21) + +#define OUTPUT_DMA_MAX_BUFS 32 +#define OUTPUT_DMA_BUFS 8 +#define OUTPUT_DMA_SIZE (128*47*21) + +struct ddb; +struct ddb_port; + +struct ddb_input { + struct ddb_port *port; + u32 nr; + int attached; + + dma_addr_t pbuf[INPUT_DMA_MAX_BUFS]; + u8 *vbuf[INPUT_DMA_MAX_BUFS]; + u32 dma_buf_num; + u32 dma_buf_size; + + struct tasklet_struct tasklet; + spinlock_t lock; + wait_queue_head_t wq; + int running; + u32 stat; + u32 cbuf; + u32 coff; + + struct dvb_adapter adap; + struct dvb_device *dev; + struct dvb_frontend *fe; + struct dvb_frontend *fe2; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvbnet; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int users; + int (*gate_ctrl)(struct dvb_frontend *, int); +}; + +struct ddb_output { + struct ddb_port *port; + u32 nr; + dma_addr_t pbuf[OUTPUT_DMA_MAX_BUFS]; + u8 *vbuf[OUTPUT_DMA_MAX_BUFS]; + u32 dma_buf_num; + u32 dma_buf_size; + struct tasklet_struct tasklet; + spinlock_t lock; + wait_queue_head_t wq; + int running; + u32 stat; + u32 cbuf; + u32 coff; + + struct dvb_adapter adap; + struct dvb_device *dev; +}; + +struct ddb_i2c { + struct ddb *dev; + u32 nr; + struct i2c_adapter adap; + struct i2c_adapter adap2; + u32 regs; + u32 rbuf; + u32 wbuf; + int done; + wait_queue_head_t wq; +}; + +struct ddb_port { + struct ddb *dev; + u32 nr; + struct ddb_i2c *i2c; + struct mutex i2c_gate_lock; + u32 class; +#define DDB_PORT_NONE 0 +#define DDB_PORT_CI 1 +#define DDB_PORT_TUNER 2 + u32 type; +#define DDB_TUNER_NONE 0 +#define DDB_TUNER_DVBS_ST 1 +#define DDB_TUNER_DVBS_ST_AA 2 +#define DDB_TUNER_DVBCT_TR 16 +#define DDB_TUNER_DVBCT_ST 17 + u32 adr; + + struct ddb_input *input[2]; + struct ddb_output *output; + struct dvb_ca_en50221 *en; +}; + +struct ddb { + struct pci_dev *pdev; + unsigned char *regs; + struct ddb_port port[DDB_MAX_PORT]; + struct ddb_i2c i2c[DDB_MAX_I2C]; + struct ddb_input input[DDB_MAX_INPUT]; + struct ddb_output output[DDB_MAX_OUTPUT]; + + struct device *ddb_dev; + int nr; + u8 iobuf[1028]; + + struct ddb_info *info; + int msi; +}; + +/****************************************************************************/ + +#define ddbwritel(_val, _adr) writel((_val), \ + (char *) (dev->regs+(_adr))) +#define ddbreadl(_adr) readl((char *) (dev->regs+(_adr))) +#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *) \ + (dev->regs+(_adr)), (_src), (_count)) +#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \ + (dev->regs+(_adr)), (_count)) + +/****************************************************************************/ + +#endif diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile index 0b51828..8f22bcd 100644 --- a/drivers/media/dvb/dvb-core/Makefile +++ b/drivers/media/dvb/dvb-core/Makefile @@ -2,8 +2,10 @@ # Makefile for the kernel DVB device drivers. # +dvb-net-$(CONFIG_DVB_NET) := dvb_net.o + dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \ dvb_ca_en50221.o dvb_frontend.o \ - dvb_net.o dvb_ringbuffer.o dvb_math.o + $(dvb-net-y) dvb_ringbuffer.o dvb_math.o obj-$(CONFIG_DVB_CORE) += dvb-core.o diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 5b6b451..efe9c30 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -904,7 +904,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) .buffer = b \ } -static struct dtv_cmds_h dtv_cmds[] = { +static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = { _DTV_CMD(DTV_TUNE, 1, 0), _DTV_CMD(DTV_CLEAR, 1, 0), @@ -966,6 +966,7 @@ static struct dtv_cmds_h dtv_cmds[] = { _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0), _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0), + _DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0), /* Get */ _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1), diff --git a/drivers/media/dvb/dvb-core/dvb_net.h b/drivers/media/dvb/dvb-core/dvb_net.h index 3a3126ca..1e53acd 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.h +++ b/drivers/media/dvb/dvb-core/dvb_net.h @@ -32,6 +32,8 @@ #define DVB_NET_DEVICES_MAX 10 +#ifdef CONFIG_DVB_NET + struct dvb_net { struct dvb_device *dvbdev; struct net_device *device[DVB_NET_DEVICES_MAX]; @@ -40,8 +42,25 @@ struct dvb_net { struct dmx_demux *demux; }; - void dvb_net_release(struct dvb_net *); int dvb_net_init(struct dvb_adapter *, struct dvb_net *, struct dmx_demux *); +#else + +struct dvb_net { + struct dvb_device *dvbdev; +}; + +static inline void dvb_net_release(struct dvb_net *dvbnet) +{ +} + +static inline int dvb_net_init(struct dvb_adapter *adap, + struct dvb_net *dvbnet, struct dmx_demux *dmx) +{ + return 0; +} + +#endif /* ifdef CONFIG_DVB_NET */ + #endif diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index e85304c..5d73dec 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -81,6 +81,7 @@ config DVB_USB_DIB0700 select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 100ebc3..d7ad05f 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -91,7 +91,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) case GET_CONFIG: case READ_MEMORY: case RECONNECT_USB: - case GET_IR_CODE: write = 0; break; case READ_I2C: @@ -164,13 +163,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) deb_xfer("<<< "); debug_dump(buf, act_len, deb_xfer); - /* remote controller query status is 1 if remote code is not received */ - if (req->cmd == GET_IR_CODE && buf[1] == 1) { - buf[1] = 0; /* clear command "error" status */ - memset(&buf[2], 0, req->data_len); - buf[3] = 1; /* no remote code received mark */ - } - /* check status */ if (buf[1]) { err("command failed:%d", buf[1]); @@ -292,6 +284,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. } if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].len > 3 || msg[i+1].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } if (msg[i].addr == af9015_af9013_config[0].demod_address) req.cmd = READ_MEMORY; @@ -306,12 +302,16 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = af9015_ctrl_msg(d, &req); i += 2; } else if (msg[i].flags & I2C_M_RD) { - ret = -EINVAL; + if (msg[i].len > 61) { + ret = -EOPNOTSUPP; + goto error; + } if (msg[i].addr == - af9015_af9013_config[0].demod_address) + af9015_af9013_config[0].demod_address) { + ret = -EINVAL; goto error; - else - req.cmd = READ_I2C; + } + req.cmd = READ_I2C; req.i2c_addr = msg[i].addr; req.addr = addr; req.mbox = mbox; @@ -321,6 +321,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = af9015_ctrl_msg(d, &req); i += 1; } else { + if (msg[i].len > 21) { + ret = -EOPNOTSUPP; + goto error; + } if (msg[i].addr == af9015_af9013_config[0].demod_address) req.cmd = WRITE_MEMORY; @@ -735,6 +739,7 @@ static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, { 0xa3703d00, RC_MAP_ALINK_DTU_M }, { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ + { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ { } }; @@ -749,6 +754,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = { RC_MAP_AZUREWAVE_AD_TU700 }, { (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGI_VOX_MINI_III, RC_MAP_MSI_DIGIVOX_III }, + { (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGIVOX_DUO, + RC_MAP_MSI_DIGIVOX_III }, { (USB_VID_LEADTEK << 16) + USB_PID_WINFAST_DTV_DONGLE_GOLD, RC_MAP_LEADTEK_Y04G0051 }, { (USB_VID_AVERMEDIA << 16) + USB_PID_AVERMEDIA_VOLAR_X, @@ -759,6 +766,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = { RC_MAP_DIGITALNOW_TINYTWIN }, { (USB_VID_GTEK << 16) + USB_PID_TINYTWIN_3, RC_MAP_DIGITALNOW_TINYTWIN }, + { (USB_VID_KWORLD_2 << 16) + USB_PID_SVEON_STV22, + RC_MAP_MSI_DIGIVOX_III }, { } }; @@ -1082,44 +1091,11 @@ error: return ret; } -/* init 2nd I2C adapter */ -static int af9015_i2c_init(struct dvb_usb_device *d) -{ - int ret; - struct af9015_state *state = d->priv; - deb_info("%s:\n", __func__); - - strncpy(state->i2c_adap.name, d->desc->name, - sizeof(state->i2c_adap.name)); - state->i2c_adap.algo = d->props.i2c_algo; - state->i2c_adap.algo_data = NULL; - state->i2c_adap.dev.parent = &d->udev->dev; - - i2c_set_adapdata(&state->i2c_adap, d); - - ret = i2c_add_adapter(&state->i2c_adap); - if (ret < 0) - err("could not add i2c adapter"); - - return ret; -} - static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; - struct af9015_state *state = adap->dev->priv; - struct i2c_adapter *i2c_adap; - - if (adap->id == 0) { - /* select I2C adapter */ - i2c_adap = &adap->dev->i2c_adap; - - deb_info("%s: init I2C\n", __func__); - ret = af9015_i2c_init(adap->dev); - } else { - /* select I2C adapter */ - i2c_adap = &state->i2c_adap; + if (adap->id == 1) { /* copy firmware to 2nd demodulator */ if (af9015_config.dual_mode) { ret = af9015_copy_firmware(adap->dev); @@ -1136,7 +1112,7 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) /* attach demodulator */ adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], - i2c_adap); + &adap->dev->i2c_adap); return adap->fe == NULL ? -ENODEV : 0; } @@ -1206,57 +1182,56 @@ static struct mxl5007t_config af9015_mxl5007t_config = { static int af9015_tuner_attach(struct dvb_usb_adapter *adap) { - struct af9015_state *state = adap->dev->priv; - struct i2c_adapter *i2c_adap; int ret; deb_info("%s:\n", __func__); - /* select I2C adapter */ - if (adap->id == 0) - i2c_adap = &adap->dev->i2c_adap; - else - i2c_adap = &state->i2c_adap; - switch (af9015_af9013_config[adap->id].tuner) { case AF9013_TUNER_MT2060: case AF9013_TUNER_MT2060_2: - ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap, + ret = dvb_attach(mt2060_attach, adap->fe, &adap->dev->i2c_adap, &af9015_mt2060_config, af9015_config.mt2060_if1[adap->id]) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_QT1010: case AF9013_TUNER_QT1010A: - ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap, + ret = dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &af9015_qt1010_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_TDA18271: - ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap, + ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, &af9015_tda18271_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_TDA18218: - ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap, + ret = dvb_attach(tda18218_attach, adap->fe, + &adap->dev->i2c_adap, &af9015_tda18218_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5003D: - ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + ret = dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &af9015_mxl5003_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5005D: case AF9013_TUNER_MXL5005R: - ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + ret = dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &af9015_mxl5005_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_ENV77H11D5: - ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap, + ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, + &adap->dev->i2c_adap, DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MC44S803: - ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap, + ret = dvb_attach(mc44s803_attach, adap->fe, + &adap->dev->i2c_adap, &af9015_mc44s803_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5007T: - ret = dvb_attach(mxl5007t_attach, adap->fe, i2c_adap, + ret = dvb_attach(mxl5007t_attach, adap->fe, + &adap->dev->i2c_adap, 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_UNKNOWN: @@ -1309,6 +1284,7 @@ static struct usb_device_id af9015_usb_table[] = { USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)}, /* 35 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)}, {USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1502,7 +1478,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 9, /* check max from dvb-usb.h */ + .num_device_descs = 10, /* check max from dvb-usb.h */ .devices = { { .name = "Xtensions XD-380", @@ -1554,6 +1530,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[20], NULL}, .warm_ids = {NULL}, }, + { + .name = "Sveon STV22 Dual USB DVB-T Tuner HDTV", + .cold_ids = {&af9015_usb_table[37], NULL}, + .warm_ids = {NULL}, + }, } }, { .caps = DVB_USB_IS_AN_I2C_ADAPTER, @@ -1704,33 +1685,11 @@ static int af9015_usb_probe(struct usb_interface *intf, return ret; } -static void af9015_i2c_exit(struct dvb_usb_device *d) -{ - struct af9015_state *state = d->priv; - deb_info("%s:\n", __func__); - - /* remove 2nd I2C adapter */ - if (d->state & DVB_USB_STATE_I2C) - i2c_del_adapter(&state->i2c_adap); -} - -static void af9015_usb_device_exit(struct usb_interface *intf) -{ - struct dvb_usb_device *d = usb_get_intfdata(intf); - deb_info("%s:\n", __func__); - - /* remove 2nd I2C adapter */ - if (d != NULL && d->desc != NULL) - af9015_i2c_exit(d); - - dvb_usb_device_exit(intf); -} - /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver af9015_usb_driver = { .name = "dvb_usb_af9015", .probe = af9015_usb_probe, - .disconnect = af9015_usb_device_exit, + .disconnect = dvb_usb_device_exit, .id_table = af9015_usb_table, }; diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index beb3004..6252ea6 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -99,7 +99,6 @@ enum af9015_ir_mode { }; struct af9015_state { - struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */ u8 rc_repeat; u32 rc_keycode; u8 rc_last[4]; diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 7c327b5..2cbf19a 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -347,15 +347,17 @@ static struct isl6423_config anysee_isl6423_config = { * PCB: ? * parts: DNOS404ZH102A(MT352, DTT7579(?)) * - * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? - * PCB: ? + * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)" + * PCB: PCB 507T (rev1.61) * parts: DNOS404ZH103A(ZL10353, DTT7579(?)) + * OEA=0a OEB=00 OEC=00 OED=ff OEE=00 + * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00 * * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee" * PCB: 507CD (rev1.1) * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01 - * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe - * IOA=4f IOB=ff IOC=00 IOD=06 IOF=01 + * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe + * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01 * IOD[0] ZL10353 1=enabled * IOA[7] TS 0=enabled * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not) @@ -363,30 +365,30 @@ static struct isl6423_config anysee_isl6423_config = { * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)" * PCB: 507DC (rev0.2) * parts: TDA10023, DTOS403IH102B TM, CST56I01 - * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe - * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01 + * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe + * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01 * IOD[0] TDA10023 1=enabled * * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" * PCB: 507SI (rev2.1) * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe - * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01 + * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe + * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01 * IOD[0] CX24116 1=enabled * * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" * PCB: 507FA (rev0.4) * parts: TDA10023, DTOS403IH102B TM, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff - * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0 + * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff + * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 * IOD[5] TDA10023 1=enabled * IOE[0] tuner 1=enabled * * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" * PCB: 507FA (rev1.1) * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024 - * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff - * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0 + * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff + * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 * DVB-C: * IOD[5] TDA10023 1=enabled * IOE[0] tuner 1=enabled @@ -398,8 +400,8 @@ static struct isl6423_config anysee_isl6423_config = { * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)" * PCB: 508TC (rev0.6) * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) - * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff - * IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4 + * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff + * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 * IOA[7] TS 1=enabled * IOE[4] TDA18212 1=enabled * DVB-C: @@ -414,11 +416,34 @@ static struct isl6423_config anysee_isl6423_config = { * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)" * PCB: 508S2 (rev0.7) * parts: DNBU10512IST(STV0903, STV6110), ISL6423 - * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff - * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4 + * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff + * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 * IOA[7] TS 1=enabled * IOE[5] STV0903 1=enabled * + * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)" + * PCB: 508PTC (rev0.5) + * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) + * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff + * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 + * IOA[7] TS 1=enabled + * IOE[4] TDA18212 1=enabled + * DVB-C: + * IOD[6] ZL10353 0=disabled + * IOD[5] TDA10023 1=enabled + * IOE[0] IF 1=enabled + * DVB-T: + * IOD[5] TDA10023 0=disabled + * IOD[6] ZL10353 1=enabled + * IOE[0] IF 0=enabled + * + * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" + * PCB: 508PS2 (rev0.4) + * parts: DNBU10512IST(STV0903, STV6110), ISL6423 + * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff + * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 + * IOA[7] TS 1=enabled + * IOE[5] STV0903 1=enabled */ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) @@ -459,7 +484,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) state->hw = hw_info[0]; switch (state->hw) { - case ANYSEE_HW_02: /* 2 */ + case ANYSEE_HW_507T: /* 2 */ /* E30 */ /* attach demod */ @@ -593,7 +618,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) break; case ANYSEE_HW_508TC: /* 18 */ + case ANYSEE_HW_508PTC: /* 21 */ /* E7 TC */ + /* E7 PTC */ /* enable transport stream on IOA[7] */ ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); @@ -650,7 +677,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) break; case ANYSEE_HW_508S2: /* 19 */ + case ANYSEE_HW_508PS2: /* 22 */ /* E7 S2 */ + /* E7 PS2 */ /* enable transport stream on IOA[7] */ ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); @@ -687,7 +716,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) deb_info("%s:\n", __func__); switch (state->hw) { - case ANYSEE_HW_02: /* 2 */ + case ANYSEE_HW_507T: /* 2 */ /* E30 */ /* attach tuner */ @@ -762,7 +791,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) break; case ANYSEE_HW_508TC: /* 18 */ + case ANYSEE_HW_508PTC: /* 21 */ /* E7 TC */ + /* E7 PTC */ /* enable tuner on IOE[4] */ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); @@ -775,7 +806,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) break; case ANYSEE_HW_508S2: /* 19 */ + case ANYSEE_HW_508PS2: /* 22 */ /* E7 S2 */ + /* E7 PS2 */ /* attach tuner */ fe = dvb_attach(stv6110_attach, adap->fe, diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h index a7673aa..ad6ccd1 100644 --- a/drivers/media/dvb/dvb-usb/anysee.h +++ b/drivers/media/dvb/dvb-usb/anysee.h @@ -61,13 +61,15 @@ struct anysee_state { u8 seq; }; -#define ANYSEE_HW_02 2 /* E30 */ -#define ANYSEE_HW_507CD 6 /* E30 Plus */ -#define ANYSEE_HW_507DC 10 /* E30 C Plus */ -#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ -#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ -#define ANYSEE_HW_508TC 18 /* E7 TC */ -#define ANYSEE_HW_508S2 19 /* E7 S2 */ +#define ANYSEE_HW_507T 2 /* E30 */ +#define ANYSEE_HW_507CD 6 /* E30 Plus */ +#define ANYSEE_HW_507DC 10 /* E30 C Plus */ +#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ +#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ +#define ANYSEE_HW_508TC 18 /* E7 TC */ +#define ANYSEE_HW_508S2 19 /* E7 S2 */ +#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ +#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ #define REG_IOA 0x80 /* Port A (bit addressable) */ #define REG_IOB 0x90 /* Port B (bit addressable) */ diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index c519ad5..d0ea5b6 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -17,6 +17,7 @@ #include "mt2266.h" #include "tuner-xc2028.h" #include "xc5000.h" +#include "xc4000.h" #include "s5h1411.h" #include "dib0070.h" #include "dib0090.h" @@ -2655,6 +2656,156 @@ static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) == NULL ? -ENODEV : 0; } +static int dib0700_xc4000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC4000_TUNER_RESET) { + /* Reset the tuner */ + dib7000p_set_gpio(adap->fe, 8, 0, 0); + msleep(10); + dib7000p_set_gpio(adap->fe, 8, 0, 1); + } else { + err("xc4000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = { + .band_caps = BAND_UHF | BAND_VHF, + .setup = 0x64, + .inv_gain = 0x02c8, + .time_stabiliz = 0x15, + .alpha_level = 0x00, + .thlock = 0x76, + .wbd_inv = 0x01, + .wbd_ref = 0x0b33, + .wbd_sel = 0x00, + .wbd_alpha = 0x02, + .agc1_max = 0x00, + .agc1_min = 0x00, + .agc2_max = 0x9b26, + .agc2_min = 0x26ca, + .agc1_pt1 = 0x00, + .agc1_pt2 = 0x00, + .agc1_pt3 = 0x00, + .agc1_slope1 = 0x00, + .agc1_slope2 = 0x00, + .agc2_pt1 = 0x00, + .agc2_pt2 = 0x80, + .agc2_slope1 = 0x1d, + .agc2_slope2 = 0x1d, + .alpha_mant = 0x11, + .alpha_exp = 0x1b, + .beta_mant = 0x17, + .beta_exp = 0x33, + .perform_agc_softsplit = 0x00, +}; + +static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */ + /* ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */ + 39370534, /* ifreq */ + 20452225, /* timf */ + 30000000 /* xtal */ +}; + +/* FIXME: none of these inputs are validated yet */ +static struct dib7000p_config pctv_340e_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000p_xc4000_agc_config, + .bw = &stk7700p_xc4000_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +/* PCTV 340e GPIOs map: + dib0700: + GPIO2 - CX25843 sleep + GPIO3 - CS5340 reset + GPIO5 - IRD + GPIO6 - Power Supply + GPIO8 - LNA (1=off 0=on) + GPIO10 - CX25843 reset + dib7000: + GPIO8 - xc4000 reset + */ +static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Power Supply on */ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(50); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(100); /* Allow power supply to settle before probing */ + + /* cx25843 reset */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(1); /* cx25843 datasheet say 350us required */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + + /* LNA off for now */ + dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* FIXME: not verified yet */ + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(500); + + if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) { + /* Demodulator not found for some reason? */ + return -ENODEV; + } + + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12, + &pctv_340e_config); + st->is_dib7000pc = 1; + + return adap->fe == NULL ? -ENODEV : 0; +} + +static struct xc4000_config dib7000p_xc4000_tunerconfig = { + .i2c_address = 0x61, + .default_pm = 1, + .dvb_amplitude = 0, + .set_smoothedcvbs = 0, + .if_khz = 5400 +}; + +static int xc4000_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + /* The xc4000 is not on the main i2c bus */ + tun_i2c = dib7000p_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + if (tun_i2c == NULL) { + printk(KERN_ERR "Could not reach tuner i2c bus\n"); + return 0; + } + + /* Setup the reset callback */ + adap->fe->callback = dib0700_xc4000_tuner_callback; + + return dvb_attach(xc4000_attach, adap->fe, tun_i2c, + &dib7000p_xc4000_tunerconfig) + == NULL ? -ENODEV : 0; +} + static struct lgdt3305_config hcw_lgdt3305_config = { .i2c_addr = 0x0e, .mpeg_mode = LGDT3305_MPEG_PARALLEL, @@ -2802,6 +2953,8 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) }, { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) }, /* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -3772,6 +3925,41 @@ struct dvb_usb_device_properties dib0700_devices[] = { RC_TYPE_NEC, .change_protocol = dib0700_change_protocol, }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = pctv340e_frontend_attach, + .tuner_attach = xc4000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV 340e HD Pro USB Stick", + { &dib0700_usb_id_table[76], NULL }, + { NULL }, + }, + { "Pinnacle PCTV Hybrid Stick Solo", + { &dib0700_usb_id_table[77], NULL }, + { NULL }, + }, + }, + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, }, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 21b1549..2a79b8f 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -230,6 +230,8 @@ #define USB_PID_PINNACLE_PCTV310E 0x3211 #define USB_PID_PINNACLE_PCTV801E 0x023a #define USB_PID_PINNACLE_PCTV801E_SE 0x023b +#define USB_PID_PINNACLE_PCTV340E 0x023d +#define USB_PID_PINNACLE_PCTV340E_SE 0x023e #define USB_PID_PINNACLE_PCTV73A 0x0243 #define USB_PID_PINNACLE_PCTV73ESE 0x0245 #define USB_PID_PINNACLE_PCTV74E 0x0246 @@ -313,6 +315,7 @@ #define USB_PID_FRIIO_WHITE 0x0001 #define USB_PID_TVWAY_PLUS 0x0002 #define USB_PID_SVEON_STV20 0xe39d +#define USB_PID_SVEON_STV22 0xe401 #define USB_PID_AZUREWAVE_AZ6027 0x3275 #define USB_PID_TERRATEC_DVBS2CI_V1 0x10a4 #define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index 76a8096..7d35d07 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -85,7 +85,7 @@ static inline u8 rc5_data(struct rc_map_table *key) return key->scancode & 0xff; } -static inline u8 rc5_scan(struct rc_map_table *key) +static inline u16 rc5_scan(struct rc_map_table *key) { return key->scancode & 0xffff; } diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h index 831749a..ed32b9d 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.h +++ b/drivers/media/dvb/dvb-usb/gp8psk.h @@ -78,9 +78,6 @@ extern int dvb_usb_gp8psk_debug; #define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ #define GET_USB_SPEED 0x07 - #define USB_SPEED_LOW 0 - #define USB_SPEED_FULL 1 - #define USB_SPEED_HIGH 2 #define RESET_FX2 0x13 diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c index 08f8842..473b95e 100644 --- a/drivers/media/dvb/dvb-usb/technisat-usb2.c +++ b/drivers/media/dvb/dvb-usb/technisat-usb2.c @@ -765,10 +765,8 @@ static void technisat_usb2_disconnect(struct usb_interface *intf) /* work and stuff was only created when the device is is hot-state */ if (dev != NULL) { struct technisat_usb2_state *state = dev->priv; - if (state != NULL) { + if (state != NULL) cancel_delayed_work_sync(&state->green_led_work); - flush_scheduled_work(); - } } dvb_usb_device_exit(intf); diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h index 969688f..cf5ec46 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.h +++ b/drivers/media/dvb/dvb-usb/vp7045.h @@ -36,9 +36,6 @@ #define Tuner_Power_OFF 0 #define GET_USB_SPEED 0x07 - #define USB_SPEED_LOW 0 - #define USB_SPEED_FULL 1 - #define USB_SPEED_HIGH 2 #define LOCK_TUNER_COMMAND 0x09 diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c index 21c52e3..489ae82 100644 --- a/drivers/media/dvb/firewire/firedtv-avc.c +++ b/drivers/media/dvb/firewire/firedtv-avc.c @@ -1208,7 +1208,7 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) if (r->response != AVC_RESPONSE_ACCEPTED) { dev_err(fdtv->device, "CA PMT failed with response 0x%x\n", r->response); - ret = -EFAULT; + ret = -EACCES; } out: mutex_unlock(&fdtv->avc_mutex); diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c index 8ffb565..e5ebdbf 100644 --- a/drivers/media/dvb/firewire/firedtv-ci.c +++ b/drivers/media/dvb/firewire/firedtv-ci.c @@ -45,11 +45,6 @@ static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat) return flags; } -static int fdtv_ca_reset(struct firedtv *fdtv) -{ - return avc_ca_reset(fdtv) ? -EFAULT : 0; -} - static int fdtv_ca_get_caps(void *arg) { struct ca_caps *cap = arg; @@ -65,12 +60,14 @@ static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg) { struct firedtv_tuner_status stat; struct ca_slot_info *slot = arg; + int err; - if (avc_tuner_status(fdtv, &stat)) - return -EFAULT; + err = avc_tuner_status(fdtv, &stat); + if (err) + return err; if (slot->num != 0) - return -EFAULT; + return -EACCES; slot->type = CA_CI; slot->flags = fdtv_get_ca_flags(&stat); @@ -81,21 +78,21 @@ static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg) { struct ca_msg *reply = arg; - return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0; + return avc_ca_app_info(fdtv, reply->msg, &reply->length); } static int fdtv_ca_info(struct firedtv *fdtv, void *arg) { struct ca_msg *reply = arg; - return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0; + return avc_ca_info(fdtv, reply->msg, &reply->length); } static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg) { struct ca_msg *reply = arg; - return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0; + return avc_ca_get_mmi(fdtv, reply->msg, &reply->length); } static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg) @@ -111,14 +108,15 @@ static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg) err = fdtv_ca_info(fdtv, arg); break; default: - if (avc_tuner_status(fdtv, &stat)) - err = -EFAULT; - else if (stat.ca_mmi == 1) + err = avc_tuner_status(fdtv, &stat); + if (err) + break; + if (stat.ca_mmi == 1) err = fdtv_ca_get_mmi(fdtv, arg); else { dev_info(fdtv->device, "unhandled CA message 0x%08x\n", fdtv->ca_last_command); - err = -EFAULT; + err = -EACCES; } } fdtv->ca_last_command = 0; @@ -141,7 +139,7 @@ static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg) data_length = msg->msg[3]; } - return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0; + return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length); } static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg) @@ -170,7 +168,7 @@ static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg) default: dev_err(fdtv->device, "unhandled CA message 0x%08x\n", fdtv->ca_last_command); - err = -EFAULT; + err = -EACCES; } return err; } @@ -184,7 +182,7 @@ static int fdtv_ca_ioctl(struct file *file, unsigned int cmd, void *arg) switch (cmd) { case CA_RESET: - err = fdtv_ca_reset(fdtv); + err = avc_ca_reset(fdtv); break; case CA_GET_CAP: err = fdtv_ca_get_caps(arg); diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 44b816f..32e08e3 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -49,6 +49,27 @@ config DVB_STV6110x help A Silicon tuner that supports DVB-S and DVB-S2 modes +comment "Multistandard (cable + terrestrial) frontends" + depends on DVB_CORE + +config DVB_DRXK + tristate "Micronas DRXK based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Micronas DRX-K DVB-C/T demodulator. + + Say Y when you want to support this frontend. + +config DVB_TDA18271C2DD + tristate "NXP TDA18271C2 silicon tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + NXP TDA18271 silicon tuner. + + Say Y when you want to support this tuner. + comment "DVB-S (satellite) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 2f3a6f7..6a6ba05 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -10,6 +10,7 @@ stv0900-objs = stv0900_core.o stv0900_sw.o au8522-objs = au8522_dig.o au8522_decoder.o drxd-objs = drxd_firm.o drxd_hard.o cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o +drxk-objs := drxk_hard.o obj-$(CONFIG_DVB_PLL) += dvb-pll.o obj-$(CONFIG_DVB_STV0299) += stv0299.o @@ -88,4 +89,6 @@ obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o obj-$(CONFIG_DVB_IX2505V) += ix2505v.o obj-$(CONFIG_DVB_STV0367) += stv0367.o obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o +obj-$(CONFIG_DVB_DRXK) += drxk.o +obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index b537891..2b248c1 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -692,7 +692,7 @@ static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) /* Interrogate the decoder to see if we are getting a real signal */ lock_status = au8522_readreg(state, 0x00); if (lock_status == 0xa2) - vt->signal = 0x01; + vt->signal = 0xffff; else vt->signal = 0x00; diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c index e9ee555..c341d57 100644 --- a/drivers/media/dvb/frontends/cx24113.c +++ b/drivers/media/dvb/frontends/cx24113.c @@ -31,8 +31,8 @@ static int debug; -#define info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) -#define err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0) +#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0) +#define cx_err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0) #define dprintk(args...) \ do { \ @@ -341,7 +341,7 @@ static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f) } while (N < 6 && R < 3); if (N < 6) { - err("strange frequency: N < 6\n"); + cx_err("strange frequency: N < 6\n"); return; } F = freq_hz; @@ -563,7 +563,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, kzalloc(sizeof(struct cx24113_state), GFP_KERNEL); int rc; if (state == NULL) { - err("Unable to kzalloc\n"); + cx_err("Unable to kzalloc\n"); goto error; } @@ -571,7 +571,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, state->config = config; state->i2c = i2c; - info("trying to detect myself\n"); + cx_info("trying to detect myself\n"); /* making a dummy read, because of some expected troubles * after power on */ @@ -579,24 +579,24 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe, rc = cx24113_readreg(state, 0x00); if (rc < 0) { - info("CX24113 not found.\n"); + cx_info("CX24113 not found.\n"); goto error; } state->rev = rc; switch (rc) { case 0x43: - info("detected CX24113 variant\n"); + cx_info("detected CX24113 variant\n"); break; case REV_CX24113: - info("successfully detected\n"); + cx_info("successfully detected\n"); break; default: - err("unsupported device id: %x\n", state->rev); + cx_err("unsupported device id: %x\n", state->rev); goto error; } state->ver = cx24113_readreg(state, 0x01); - info("version: %x\n", state->ver); + cx_info("version: %x\n", state->ver); /* create dvb_frontend */ memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops, diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index 95c6465..ccd0525 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -1452,11 +1452,7 @@ tuned: /* Set/Reset B/W */ cmd.args[0x00] = CMD_BANDWIDTH; cmd.args[0x01] = 0x00; cmd.len = 0x02; - ret = cx24116_cmd_execute(fe, &cmd); - if (ret != 0) - return ret; - - return ret; + return cx24116_cmd_execute(fe, &cmd); } static int cx24116_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h index ad17845..2906582 100644 --- a/drivers/media/dvb/frontends/cxd2820r.h +++ b/drivers/media/dvb/frontends/cxd2820r.h @@ -55,13 +55,13 @@ struct cxd2820r_config { * Default: 0 * Values: 0, 1 */ - int if_agc_polarity:1; + bool if_agc_polarity; /* Spectrum inversion. * Default: 0 * Values: 0, 1 */ - int spec_inv:1; + bool spec_inv; /* IFs for all used modes. * Default: none, must set diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index 0779f69..d416e85 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -314,6 +314,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe, } else if (c->delivery_system == SYS_DVBT2) { /* DVB-T => DVB-T2 */ ret = cxd2820r_sleep_t(fe); + if (ret) + break; ret = cxd2820r_set_frontend_t2(fe, p); } break; @@ -324,6 +326,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe, } else if (c->delivery_system == SYS_DVBT) { /* DVB-T2 => DVB-T */ ret = cxd2820r_sleep_t2(fe); + if (ret) + break; ret = cxd2820r_set_frontend_t(fe, p); } break; @@ -740,12 +744,13 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) { struct cxd2820r_priv *priv = i2c_get_adapdata(i2c_adap); - u8 obuf[msg[0].len + 2]; + int ret; + u8 *obuf = kmalloc(msg[0].len + 2, GFP_KERNEL); struct i2c_msg msg2[2] = { { .addr = priv->cfg.i2c_address, .flags = 0, - .len = sizeof(obuf), + .len = msg[0].len + 2, .buf = obuf, }, { .addr = priv->cfg.i2c_address, @@ -755,15 +760,24 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap, } }; + if (!obuf) + return -ENOMEM; + obuf[0] = 0x09; obuf[1] = (msg[0].addr << 1); if (num == 2) { /* I2C read */ obuf[1] = (msg[0].addr << 1) | I2C_M_RD; /* I2C RD flag */ - msg2[0].len = sizeof(obuf) - 1; /* maybe HW bug ? */ + msg2[0].len = msg[0].len + 2 - 1; /* '-1' maybe HW bug ? */ } memcpy(&obuf[2], msg[0].buf, msg[0].len); - return i2c_transfer(priv->i2c, msg2, num); + ret = i2c_transfer(priv->i2c, msg2, num); + if (ret < 0) + warn("tuner i2c failed ret:%d", ret); + + kfree(obuf); + + return ret; } static struct i2c_algorithm cxd2820r_tuner_i2c_algo = { diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb/frontends/cxd2820r_priv.h index 25adbee..0c0ebc9 100644 --- a/drivers/media/dvb/frontends/cxd2820r_priv.h +++ b/drivers/media/dvb/frontends/cxd2820r_priv.h @@ -55,13 +55,13 @@ struct cxd2820r_priv { struct mutex fe_lock; /* FE lock */ int active_fe:2; /* FE lock, -1=NONE, 0=DVB-T/T2, 1=DVB-C */ - int ber_running:1; + bool ber_running; u8 bank[2]; u8 gpio[3]; fe_delivery_system_t delivery_system; - int last_tune_failed:1; /* for switch between T and T2 tune */ + bool last_tune_failed; /* for switch between T and T2 tune */ }; /* cxd2820r_core.c */ diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 0c9f40c..a64a538 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -2336,6 +2336,11 @@ struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, request_firmware() will hit an OOPS (this should be moved somewhere more common) */ + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); /* init 7090 tuner adapter */ diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c index ea4c1c3..2238bf0 100644 --- a/drivers/media/dvb/frontends/drxd_hard.c +++ b/drivers/media/dvb/frontends/drxd_hard.c @@ -28,7 +28,6 @@ #include <linux/delay.h> #include <linux/firmware.h> #include <linux/i2c.h> -#include <linux/version.h> #include <asm/div64.h> #include "dvb_frontend.h" @@ -233,7 +232,7 @@ static int i2c_read(struct i2c_adapter *adap, return 0; } -inline u32 MulDiv32(u32 a, u32 b, u32 c) +static inline u32 MulDiv32(u32 a, u32 b, u32 c) { u64 tmp64; @@ -910,14 +909,16 @@ static int load_firmware(struct drxd_state *state, const char *fw_name) return -EIO; } - state->microcode = kzalloc(fw->size, GFP_KERNEL); + state->microcode = kmalloc(fw->size, GFP_KERNEL); if (state->microcode == NULL) { - printk(KERN_ERR "drxd: firmware load failure: nomemory\n"); + release_firmware(fw); + printk(KERN_ERR "drxd: firmware load failure: no memory\n"); return -ENOMEM; } memcpy(state->microcode, fw->data, fw->size); state->microcode_length = fw->size; + release_firmware(fw); return 0; } diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h new file mode 100644 index 0000000..58baf41 --- /dev/null +++ b/drivers/media/dvb/frontends/drxk.h @@ -0,0 +1,47 @@ +#ifndef _DRXK_H_ +#define _DRXK_H_ + +#include <linux/types.h> +#include <linux/i2c.h> + +/** + * struct drxk_config - Configure the initial parameters for DRX-K + * + * adr: I2C Address of the DRX-K + * single_master: Device is on the single master mode + * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner + * antenna_gpio: GPIO bit used to control the antenna + * antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 + * means that 1=DVBC, 0 = DVBT. Zero means the opposite. + * microcode_name: Name of the firmware file with the microcode + * + * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is + * UIO-3. + */ +struct drxk_config { + u8 adr; + bool single_master; + bool no_i2c_bridge; + + bool antenna_dvbt; + u16 antenna_gpio; + + const char *microcode_name; +}; + +#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c, + struct dvb_frontend **fe_t); +#else +static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c, + struct dvb_frontend **fe_t) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c new file mode 100644 index 0000000..41b0838 --- /dev/null +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -0,0 +1,6454 @@ +/* + * drxk_hard: DRX-K DVB-C/T demodulator driver + * + * Copyright (C) 2010-2011 Digital Devices GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <asm/div64.h> + +#include "dvb_frontend.h" +#include "drxk.h" +#include "drxk_hard.h" + +static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode); +static int PowerDownQAM(struct drxk_state *state); +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode); +static int SetQAMStandard(struct drxk_state *state, + enum OperationMode oMode); +static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset); +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode); +static int DVBTStart(struct drxk_state *state); +static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset); +static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus); +static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus); +static int SwitchAntennaToQAM(struct drxk_state *state); +static int SwitchAntennaToDVBT(struct drxk_state *state); + +static bool IsDVBT(struct drxk_state *state) +{ + return state->m_OperationMode == OM_DVBT; +} + +static bool IsQAM(struct drxk_state *state) +{ + return state->m_OperationMode == OM_QAM_ITU_A || + state->m_OperationMode == OM_QAM_ITU_B || + state->m_OperationMode == OM_QAM_ITU_C; +} + +bool IsA1WithPatchCode(struct drxk_state *state) +{ + return state->m_DRXK_A1_PATCH_CODE; +} + +bool IsA1WithRomCode(struct drxk_state *state) +{ + return state->m_DRXK_A1_ROM_CODE; +} + +#define NOA1ROM 0 + +#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) +#define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) + +#define DEFAULT_MER_83 165 +#define DEFAULT_MER_93 250 + +#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH +#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02) +#endif + +#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH +#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) +#endif + +#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH +#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06) +#endif + +#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 +#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 + +#ifndef DRXK_KI_RAGC_ATV +#define DRXK_KI_RAGC_ATV 4 +#endif +#ifndef DRXK_KI_IAGC_ATV +#define DRXK_KI_IAGC_ATV 6 +#endif +#ifndef DRXK_KI_DAGC_ATV +#define DRXK_KI_DAGC_ATV 7 +#endif + +#ifndef DRXK_KI_RAGC_QAM +#define DRXK_KI_RAGC_QAM 3 +#endif +#ifndef DRXK_KI_IAGC_QAM +#define DRXK_KI_IAGC_QAM 4 +#endif +#ifndef DRXK_KI_DAGC_QAM +#define DRXK_KI_DAGC_QAM 7 +#endif +#ifndef DRXK_KI_RAGC_DVBT +#define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2) +#endif +#ifndef DRXK_KI_IAGC_DVBT +#define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2) +#endif +#ifndef DRXK_KI_DAGC_DVBT +#define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7) +#endif + +#ifndef DRXK_AGC_DAC_OFFSET +#define DRXK_AGC_DAC_OFFSET (0x800) +#endif + +#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ +#define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) +#endif + +#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ +#define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) +#endif + +#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ +#define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) +#endif + +#ifndef DRXK_QAM_SYMBOLRATE_MAX +#define DRXK_QAM_SYMBOLRATE_MAX (7233000) +#endif + +#define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56 +#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64 +#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0 +#define DRXK_BL_ROM_OFFSET_TAPS_BG 24 +#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32 +#define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40 +#define DRXK_BL_ROM_OFFSET_TAPS_FM 48 +#define DRXK_BL_ROM_OFFSET_UCODE 0 + +#define DRXK_BLC_TIMEOUT 100 + +#define DRXK_BLCC_NR_ELEMENTS_TAPS 2 +#define DRXK_BLCC_NR_ELEMENTS_UCODE 6 + +#define DRXK_BLDC_NR_ELEMENTS_TAPS 28 + +#ifndef DRXK_OFDM_NE_NOTCH_WIDTH +#define DRXK_OFDM_NE_NOTCH_WIDTH (4) +#endif + +#define DRXK_QAM_SL_SIG_POWER_QAM16 (40960) +#define DRXK_QAM_SL_SIG_POWER_QAM32 (20480) +#define DRXK_QAM_SL_SIG_POWER_QAM64 (43008) +#define DRXK_QAM_SL_SIG_POWER_QAM128 (20992) +#define DRXK_QAM_SL_SIG_POWER_QAM256 (43520) + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +#define dprintk(level, fmt, arg...) do { \ +if (debug >= level) \ + printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg); \ +} while (0) + + +static inline u32 MulDiv32(u32 a, u32 b, u32 c) +{ + u64 tmp64; + + tmp64 = (u64) a * (u64) b; + do_div(tmp64, c); + + return (u32) tmp64; +} + +inline u32 Frac28a(u32 a, u32 c) +{ + int i = 0; + u32 Q1 = 0; + u32 R0 = 0; + + R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */ + Q1 = a / c; /* integer part, only the 4 least significant bits + will be visible in the result */ + + /* division using radix 16, 7 nibbles in the result */ + for (i = 0; i < 7; i++) { + Q1 = (Q1 << 4) | (R0 / c); + R0 = (R0 % c) << 4; + } + /* rounding */ + if ((R0 >> 3) >= c) + Q1++; + + return Q1; +} + +static u32 Log10Times100(u32 x) +{ + static const u8 scale = 15; + static const u8 indexWidth = 5; + u8 i = 0; + u32 y = 0; + u32 d = 0; + u32 k = 0; + u32 r = 0; + /* + log2lut[n] = (1<<scale) * 200 * log2(1.0 + ((1.0/(1<<INDEXWIDTH)) * n)) + 0 <= n < ((1<<INDEXWIDTH)+1) + */ + + static const u32 log2lut[] = { + 0, /* 0.000000 */ + 290941, /* 290941.300628 */ + 573196, /* 573196.476418 */ + 847269, /* 847269.179851 */ + 1113620, /* 1113620.489452 */ + 1372674, /* 1372673.576986 */ + 1624818, /* 1624817.752104 */ + 1870412, /* 1870411.981536 */ + 2109788, /* 2109787.962654 */ + 2343253, /* 2343252.817465 */ + 2571091, /* 2571091.461923 */ + 2793569, /* 2793568.696416 */ + 3010931, /* 3010931.055901 */ + 3223408, /* 3223408.452106 */ + 3431216, /* 3431215.635215 */ + 3634553, /* 3634553.498355 */ + 3833610, /* 3833610.244726 */ + 4028562, /* 4028562.434393 */ + 4219576, /* 4219575.925308 */ + 4406807, /* 4406806.721144 */ + 4590402, /* 4590401.736809 */ + 4770499, /* 4770499.491025 */ + 4947231, /* 4947230.734179 */ + 5120719, /* 5120719.018555 */ + 5291081, /* 5291081.217197 */ + 5458428, /* 5458427.996830 */ + 5622864, /* 5622864.249668 */ + 5784489, /* 5784489.488298 */ + 5943398, /* 5943398.207380 */ + 6099680, /* 6099680.215452 */ + 6253421, /* 6253420.939751 */ + 6404702, /* 6404701.706649 */ + 6553600, /* 6553600.000000 */ + }; + + + if (x == 0) + return 0; + + /* Scale x (normalize) */ + /* computing y in log(x/y) = log(x) - log(y) */ + if ((x & ((0xffffffff) << (scale + 1))) == 0) { + for (k = scale; k > 0; k--) { + if (x & (((u32) 1) << scale)) + break; + x <<= 1; + } + } else { + for (k = scale; k < 31; k++) { + if ((x & (((u32) (-1)) << (scale + 1))) == 0) + break; + x >>= 1; + } + } + /* + Now x has binary point between bit[scale] and bit[scale-1] + and 1.0 <= x < 2.0 */ + + /* correction for divison: log(x) = log(x/y)+log(y) */ + y = k * ((((u32) 1) << scale) * 200); + + /* remove integer part */ + x &= ((((u32) 1) << scale) - 1); + /* get index */ + i = (u8) (x >> (scale - indexWidth)); + /* compute delta (x - a) */ + d = x & ((((u32) 1) << (scale - indexWidth)) - 1); + /* compute log, multiplication (d* (..)) must be within range ! */ + y += log2lut[i] + + ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth)); + /* Conver to log10() */ + y /= 108853; /* (log2(10) << scale) */ + r = (y >> 1); + /* rounding */ + if (y & ((u32) 1)) + r++; + return r; +} + +/****************************************************************************/ +/* I2C **********************************************************************/ +/****************************************************************************/ + +static int i2c_read1(struct i2c_adapter *adapter, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} + }; + + return i2c_transfer(adapter, msgs, 1); +} + +static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len) +{ + int status; + struct i2c_msg msg = { + .addr = adr, .flags = 0, .buf = data, .len = len }; + + dprintk(3, ":"); + if (debug > 2) { + int i; + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", data[i]); + printk(KERN_CONT "\n"); + } + status = i2c_transfer(adap, &msg, 1); + if (status >= 0 && status != 1) + status = -EIO; + + if (status < 0) + printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr); + + return status; +} + +static int i2c_read(struct i2c_adapter *adap, + u8 adr, u8 *msg, int len, u8 *answ, int alen) +{ + int status; + struct i2c_msg msgs[2] = { + {.addr = adr, .flags = 0, + .buf = msg, .len = len}, + {.addr = adr, .flags = I2C_M_RD, + .buf = answ, .len = alen} + }; + + status = i2c_transfer(adap, msgs, 2); + if (status != 2) { + if (debug > 2) + printk(KERN_CONT ": ERROR!\n"); + if (status >= 0) + status = -EIO; + + printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr); + return status; + } + if (debug > 2) { + int i; + dprintk(2, ": read from "); + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", msg[i]); + printk(KERN_CONT "Value = "); + for (i = 0; i < alen; i++) + printk(KERN_CONT " %02x", answ[i]); + printk(KERN_CONT "\n"); + } + return 0; +} + +static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags) +{ + int status; + u8 adr = state->demod_address, mm1[4], mm2[2], len; + + if (state->single_master) + flags |= 0xC0; + + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm1[0] = (((reg << 1) & 0xFF) | 0x01); + mm1[1] = ((reg >> 16) & 0xFF); + mm1[2] = ((reg >> 24) & 0xFF) | flags; + mm1[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm1[0] = ((reg << 1) & 0xFF); + mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); + status = i2c_read(state->i2c, adr, mm1, len, mm2, 2); + if (status < 0) + return status; + if (data) + *data = mm2[0] | (mm2[1] << 8); + + return 0; +} + +static int read16(struct drxk_state *state, u32 reg, u16 *data) +{ + return read16_flags(state, reg, data, 0); +} + +static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags) +{ + int status; + u8 adr = state->demod_address, mm1[4], mm2[4], len; + + if (state->single_master) + flags |= 0xC0; + + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm1[0] = (((reg << 1) & 0xFF) | 0x01); + mm1[1] = ((reg >> 16) & 0xFF); + mm1[2] = ((reg >> 24) & 0xFF) | flags; + mm1[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm1[0] = ((reg << 1) & 0xFF); + mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); + status = i2c_read(state->i2c, adr, mm1, len, mm2, 4); + if (status < 0) + return status; + if (data) + *data = mm2[0] | (mm2[1] << 8) | + (mm2[2] << 16) | (mm2[3] << 24); + + return 0; +} + +static int read32(struct drxk_state *state, u32 reg, u32 *data) +{ + return read32_flags(state, reg, data, 0); +} + +static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags) +{ + u8 adr = state->demod_address, mm[6], len; + + if (state->single_master) + flags |= 0xC0; + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm[0] = (((reg << 1) & 0xFF) | 0x01); + mm[1] = ((reg >> 16) & 0xFF); + mm[2] = ((reg >> 24) & 0xFF) | flags; + mm[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm[0] = ((reg << 1) & 0xFF); + mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + mm[len] = data & 0xff; + mm[len + 1] = (data >> 8) & 0xff; + + dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags); + return i2c_write(state->i2c, adr, mm, len + 2); +} + +static int write16(struct drxk_state *state, u32 reg, u16 data) +{ + return write16_flags(state, reg, data, 0); +} + +static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags) +{ + u8 adr = state->demod_address, mm[8], len; + + if (state->single_master) + flags |= 0xC0; + if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { + mm[0] = (((reg << 1) & 0xFF) | 0x01); + mm[1] = ((reg >> 16) & 0xFF); + mm[2] = ((reg >> 24) & 0xFF) | flags; + mm[3] = ((reg >> 7) & 0xFF); + len = 4; + } else { + mm[0] = ((reg << 1) & 0xFF); + mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); + len = 2; + } + mm[len] = data & 0xff; + mm[len + 1] = (data >> 8) & 0xff; + mm[len + 2] = (data >> 16) & 0xff; + mm[len + 3] = (data >> 24) & 0xff; + dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags); + + return i2c_write(state->i2c, adr, mm, len + 4); +} + +static int write32(struct drxk_state *state, u32 reg, u32 data) +{ + return write32_flags(state, reg, data, 0); +} + +static int write_block(struct drxk_state *state, u32 Address, + const int BlockSize, const u8 pBlock[]) +{ + int status = 0, BlkSize = BlockSize; + u8 Flags = 0; + + if (state->single_master) + Flags |= 0xC0; + + while (BlkSize > 0) { + int Chunk = BlkSize > state->m_ChunkSize ? + state->m_ChunkSize : BlkSize; + u8 *AdrBuf = &state->Chunk[0]; + u32 AdrLength = 0; + + if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) { + AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01); + AdrBuf[1] = ((Address >> 16) & 0xFF); + AdrBuf[2] = ((Address >> 24) & 0xFF); + AdrBuf[3] = ((Address >> 7) & 0xFF); + AdrBuf[2] |= Flags; + AdrLength = 4; + if (Chunk == state->m_ChunkSize) + Chunk -= 2; + } else { + AdrBuf[0] = ((Address << 1) & 0xFF); + AdrBuf[1] = (((Address >> 16) & 0x0F) | + ((Address >> 18) & 0xF0)); + AdrLength = 2; + } + memcpy(&state->Chunk[AdrLength], pBlock, Chunk); + dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags); + if (debug > 1) { + int i; + if (pBlock) + for (i = 0; i < Chunk; i++) + printk(KERN_CONT " %02x", pBlock[i]); + printk(KERN_CONT "\n"); + } + status = i2c_write(state->i2c, state->demod_address, + &state->Chunk[0], Chunk + AdrLength); + if (status < 0) { + printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n", + __func__, Address); + break; + } + pBlock += Chunk; + Address += (Chunk >> 1); + BlkSize -= Chunk; + } + return status; +} + +#ifndef DRXK_MAX_RETRIES_POWERUP +#define DRXK_MAX_RETRIES_POWERUP 20 +#endif + +int PowerUpDevice(struct drxk_state *state) +{ + int status; + u8 data = 0; + u16 retryCount = 0; + + dprintk(1, "\n"); + + status = i2c_read1(state->i2c, state->demod_address, &data); + if (status < 0) { + do { + data = 0; + status = i2c_write(state->i2c, state->demod_address, + &data, 1); + msleep(10); + retryCount++; + if (status < 0) + continue; + status = i2c_read1(state->i2c, state->demod_address, + &data); + } while (status < 0 && + (retryCount < DRXK_MAX_RETRIES_POWERUP)); + if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP) + goto error; + } + + /* Make sure all clk domains are active */ + status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + /* Enable pll lock tests */ + status = write16(state, SIO_CC_PLL_LOCK__A, 1); + if (status < 0) + goto error; + + state->m_currentPowerMode = DRX_POWER_UP; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +static int init_state(struct drxk_state *state) +{ + /* + * FIXME: most (all?) of the values bellow should be moved into + * struct drxk_config, as they are probably board-specific + */ + u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulVSBIfAgcOutputLevel = 0; + u32 ulVSBIfAgcMinLevel = 0; + u32 ulVSBIfAgcMaxLevel = 0x7FFF; + u32 ulVSBIfAgcSpeed = 3; + + u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulVSBRfAgcOutputLevel = 0; + u32 ulVSBRfAgcMinLevel = 0; + u32 ulVSBRfAgcMaxLevel = 0x7FFF; + u32 ulVSBRfAgcSpeed = 3; + u32 ulVSBRfAgcTop = 9500; + u32 ulVSBRfAgcCutOffCurrent = 4000; + + u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO; + u32 ulATVIfAgcOutputLevel = 0; + u32 ulATVIfAgcMinLevel = 0; + u32 ulATVIfAgcMaxLevel = 0; + u32 ulATVIfAgcSpeed = 3; + + u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF; + u32 ulATVRfAgcOutputLevel = 0; + u32 ulATVRfAgcMinLevel = 0; + u32 ulATVRfAgcMaxLevel = 0; + u32 ulATVRfAgcTop = 9500; + u32 ulATVRfAgcCutOffCurrent = 4000; + u32 ulATVRfAgcSpeed = 3; + + u32 ulQual83 = DEFAULT_MER_83; + u32 ulQual93 = DEFAULT_MER_93; + + u32 ulDVBTStaticTSClock = 1; + u32 ulDVBCStaticTSClock = 1; + + u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; + u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; + + /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ + /* io_pad_cfg_mode output mode is drive always */ + /* io_pad_cfg_drive is set to power 2 (23 mA) */ + u32 ulGPIOCfg = 0x0113; + u32 ulSerialMode = 1; + u32 ulInvertTSClock = 0; + u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; + u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH; + u32 ulDVBTBitrate = 50000000; + u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; + + u32 ulInsertRSByte = 0; + + u32 ulRfMirror = 1; + u32 ulPowerDown = 0; + + dprintk(1, "\n"); + + state->m_hasLNA = false; + state->m_hasDVBT = false; + state->m_hasDVBC = false; + state->m_hasATV = false; + state->m_hasOOB = false; + state->m_hasAudio = false; + + state->m_ChunkSize = 124; + + state->m_oscClockFreq = 0; + state->m_smartAntInverted = false; + state->m_bPDownOpenBridge = false; + + /* real system clock frequency in kHz */ + state->m_sysClockFreq = 151875; + /* Timing div, 250ns/Psys */ + /* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */ + state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) * + HI_I2C_DELAY) / 1000; + /* Clipping */ + if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) + state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; + state->m_HICfgWakeUpKey = (state->demod_address << 1); + /* port/bridge/power down ctrl */ + state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; + + state->m_bPowerDown = (ulPowerDown != 0); + + state->m_DRXK_A1_PATCH_CODE = false; + state->m_DRXK_A1_ROM_CODE = false; + state->m_DRXK_A2_ROM_CODE = false; + state->m_DRXK_A3_ROM_CODE = false; + state->m_DRXK_A2_PATCH_CODE = false; + state->m_DRXK_A3_PATCH_CODE = false; + + /* Init AGC and PGA parameters */ + /* VSB IF */ + state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode); + state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel); + state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel); + state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel); + state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed); + state->m_vsbPgaCfg = 140; + + /* VSB RF */ + state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode); + state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel); + state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel); + state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel); + state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed); + state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop); + state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent); + state->m_vsbPreSawCfg.reference = 0x07; + state->m_vsbPreSawCfg.usePreSaw = true; + + state->m_Quality83percent = DEFAULT_MER_83; + state->m_Quality93percent = DEFAULT_MER_93; + if (ulQual93 <= 500 && ulQual83 < ulQual93) { + state->m_Quality83percent = ulQual83; + state->m_Quality93percent = ulQual93; + } + + /* ATV IF */ + state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode); + state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel); + state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel); + state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel); + state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed); + + /* ATV RF */ + state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode); + state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel); + state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel); + state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel); + state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed); + state->m_atvRfAgcCfg.top = (ulATVRfAgcTop); + state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent); + state->m_atvPreSawCfg.reference = 0x04; + state->m_atvPreSawCfg.usePreSaw = true; + + + /* DVBT RF */ + state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; + state->m_dvbtRfAgcCfg.outputLevel = 0; + state->m_dvbtRfAgcCfg.minOutputLevel = 0; + state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF; + state->m_dvbtRfAgcCfg.top = 0x2100; + state->m_dvbtRfAgcCfg.cutOffCurrent = 4000; + state->m_dvbtRfAgcCfg.speed = 1; + + + /* DVBT IF */ + state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; + state->m_dvbtIfAgcCfg.outputLevel = 0; + state->m_dvbtIfAgcCfg.minOutputLevel = 0; + state->m_dvbtIfAgcCfg.maxOutputLevel = 9000; + state->m_dvbtIfAgcCfg.top = 13424; + state->m_dvbtIfAgcCfg.cutOffCurrent = 0; + state->m_dvbtIfAgcCfg.speed = 3; + state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30; + state->m_dvbtIfAgcCfg.IngainTgtMax = 30000; + /* state->m_dvbtPgaCfg = 140; */ + + state->m_dvbtPreSawCfg.reference = 4; + state->m_dvbtPreSawCfg.usePreSaw = false; + + /* QAM RF */ + state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF; + state->m_qamRfAgcCfg.outputLevel = 0; + state->m_qamRfAgcCfg.minOutputLevel = 6023; + state->m_qamRfAgcCfg.maxOutputLevel = 27000; + state->m_qamRfAgcCfg.top = 0x2380; + state->m_qamRfAgcCfg.cutOffCurrent = 4000; + state->m_qamRfAgcCfg.speed = 3; + + /* QAM IF */ + state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO; + state->m_qamIfAgcCfg.outputLevel = 0; + state->m_qamIfAgcCfg.minOutputLevel = 0; + state->m_qamIfAgcCfg.maxOutputLevel = 9000; + state->m_qamIfAgcCfg.top = 0x0511; + state->m_qamIfAgcCfg.cutOffCurrent = 0; + state->m_qamIfAgcCfg.speed = 3; + state->m_qamIfAgcCfg.IngainTgtMax = 5119; + state->m_qamIfAgcCfg.FastClipCtrlDelay = 50; + + state->m_qamPgaCfg = 140; + state->m_qamPreSawCfg.reference = 4; + state->m_qamPreSawCfg.usePreSaw = false; + + state->m_OperationMode = OM_NONE; + state->m_DrxkState = DRXK_UNINITIALIZED; + + /* MPEG output configuration */ + state->m_enableMPEGOutput = true; /* If TRUE; enable MPEG ouput */ + state->m_insertRSByte = false; /* If TRUE; insert RS byte */ + state->m_enableParallel = true; /* If TRUE; + parallel out otherwise serial */ + state->m_invertDATA = false; /* If TRUE; invert DATA signals */ + state->m_invertERR = false; /* If TRUE; invert ERR signal */ + state->m_invertSTR = false; /* If TRUE; invert STR signals */ + state->m_invertVAL = false; /* If TRUE; invert VAL signals */ + state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */ + state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0); + state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0); + /* If TRUE; static MPEG clockrate will be used; + otherwise clockrate will adapt to the bitrate of the TS */ + + state->m_DVBTBitrate = ulDVBTBitrate; + state->m_DVBCBitrate = ulDVBCBitrate; + + state->m_TSDataStrength = (ulTSDataStrength & 0x07); + state->m_TSClockkStrength = (ulTSClockkStrength & 0x07); + + /* Maximum bitrate in b/s in case static clockrate is selected */ + state->m_mpegTsStaticBitrate = 19392658; + state->m_disableTEIhandling = false; + + if (ulInsertRSByte) + state->m_insertRSByte = true; + + state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; + if (ulMpegLockTimeOut < 10000) + state->m_MpegLockTimeOut = ulMpegLockTimeOut; + state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; + if (ulDemodLockTimeOut < 10000) + state->m_DemodLockTimeOut = ulDemodLockTimeOut; + + /* QAM defaults */ + state->m_Constellation = DRX_CONSTELLATION_AUTO; + state->m_qamInterleaveMode = DRXK_QAM_I12_J17; + state->m_fecRsPlen = 204 * 8; /* fecRsPlen annex A */ + state->m_fecRsPrescale = 1; + + state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM; + state->m_agcFastClipCtrlDelay = 0; + + state->m_GPIOCfg = (ulGPIOCfg); + + state->m_bPowerDown = false; + state->m_currentPowerMode = DRX_POWER_DOWN; + + state->m_enableParallel = (ulSerialMode == 0); + + state->m_rfmirror = (ulRfMirror == 0); + state->m_IfAgcPol = false; + return 0; +} + +static int DRXX_Open(struct drxk_state *state) +{ + int status = 0; + u32 jtag = 0; + u16 bid = 0; + u16 key = 0; + + dprintk(1, "\n"); + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + /* Check device id */ + status = read16(state, SIO_TOP_COMM_KEY__A, &key); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag); + if (status < 0) + goto error; + status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, key); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int GetDeviceCapabilities(struct drxk_state *state) +{ + u16 sioPdrOhwCfg = 0; + u32 sioTopJtagidLo = 0; + int status; + const char *spin = ""; + + dprintk(1, "\n"); + + /* driver 0.9.0 */ + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); + if (status < 0) + goto error; + status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg); + if (status < 0) + goto error; + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); + if (status < 0) + goto error; + + switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { + case 0: + /* ignore (bypass ?) */ + break; + case 1: + /* 27 MHz */ + state->m_oscClockFreq = 27000; + break; + case 2: + /* 20.25 MHz */ + state->m_oscClockFreq = 20250; + break; + case 3: + /* 4 MHz */ + state->m_oscClockFreq = 20250; + break; + default: + printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n"); + return -EINVAL; + } + /* + Determine device capabilities + Based on pinning v14 + */ + status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo); + if (status < 0) + goto error; + /* driver 0.9.0 */ + switch ((sioTopJtagidLo >> 29) & 0xF) { + case 0: + state->m_deviceSpin = DRXK_SPIN_A1; + spin = "A1"; + break; + case 2: + state->m_deviceSpin = DRXK_SPIN_A2; + spin = "A2"; + break; + case 3: + state->m_deviceSpin = DRXK_SPIN_A3; + spin = "A3"; + break; + default: + state->m_deviceSpin = DRXK_SPIN_UNKNOWN; + status = -EINVAL; + printk(KERN_ERR "drxk: Spin unknown\n"); + goto error2; + } + switch ((sioTopJtagidLo >> 12) & 0xFF) { + case 0x13: + /* typeId = DRX3913K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = false; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = false; + state->m_hasGPIO1 = false; + state->m_hasIRQN = false; + break; + case 0x15: + /* typeId = DRX3915K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x16: + /* typeId = DRX3916K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x18: + /* typeId = DRX3918K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = false; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x21: + /* typeId = DRX3921K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x23: + /* typeId = DRX3923K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x25: + /* typeId = DRX3925K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = true; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + case 0x26: + /* typeId = DRX3926K_TYPE_ID */ + state->m_hasLNA = false; + state->m_hasOOB = false; + state->m_hasATV = true; + state->m_hasAudio = false; + state->m_hasDVBT = true; + state->m_hasDVBC = true; + state->m_hasSAWSW = true; + state->m_hasGPIO2 = true; + state->m_hasGPIO1 = true; + state->m_hasIRQN = false; + break; + default: + printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n", + ((sioTopJtagidLo >> 12) & 0xFF)); + status = -EINVAL; + goto error2; + } + + printk(KERN_INFO + "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n", + ((sioTopJtagidLo >> 12) & 0xFF), spin, + state->m_oscClockFreq / 1000, + state->m_oscClockFreq % 1000); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + +error2: + return status; +} + +static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult) +{ + int status; + bool powerdown_cmd; + + dprintk(1, "\n"); + + /* Write command */ + status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd); + if (status < 0) + goto error; + if (cmd == SIO_HI_RA_RAM_CMD_RESET) + msleep(1); + + powerdown_cmd = + (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) && + ((state->m_HICfgCtrl) & + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) == + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); + if (powerdown_cmd == false) { + /* Wait until command rdy */ + u32 retryCount = 0; + u16 waitCmd; + + do { + msleep(1); + retryCount += 1; + status = read16(state, SIO_HI_RA_RAM_CMD__A, + &waitCmd); + } while ((status < 0) && (retryCount < DRXK_MAX_RETRIES) + && (waitCmd != 0)); + if (status < 0) + goto error; + status = read16(state, SIO_HI_RA_RAM_RES__A, pResult); + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int HI_CfgCommand(struct drxk_state *state) +{ + int status; + + dprintk(1, "\n"); + + mutex_lock(&state->mutex); + + status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv); + if (status < 0) + goto error; + status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); + if (status < 0) + goto error; + status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0); + if (status < 0) + goto error; + + state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; +error: + mutex_unlock(&state->mutex); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int InitHI(struct drxk_state *state) +{ + dprintk(1, "\n"); + + state->m_HICfgWakeUpKey = (state->demod_address << 1); + state->m_HICfgTimeout = 0x96FF; + /* port/bridge/power down ctrl */ + state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; + + return HI_CfgCommand(state); +} + +static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable) +{ + int status = -1; + u16 sioPdrMclkCfg = 0; + u16 sioPdrMdxCfg = 0; + + dprintk(1, "\n"); + + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* MPEG TS pad configuration */ + status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA); + if (status < 0) + goto error; + + if (mpegEnable == false) { + /* Set MPEG TS pads to inputmode */ + status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); + if (status < 0) + goto error; + } else { + /* Enable MPEG output */ + sioPdrMdxCfg = + ((state->m_TSDataStrength << + SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003); + sioPdrMclkCfg = ((state->m_TSClockkStrength << + SIO_PDR_MCLK_CFG_DRIVE__B) | + 0x0003); + + status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); /* Disable */ + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); /* Disable */ + if (status < 0) + goto error; + if (state->m_enableParallel == true) { + /* paralel -> enable MD1 to MD7 */ + status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + } else { + sioPdrMdxCfg = ((state->m_TSDataStrength << + SIO_PDR_MD0_CFG_DRIVE__B) + | 0x0003); + /* serial -> disable MD1 to MD7 */ + status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); + if (status < 0) + goto error; + } + status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg); + if (status < 0) + goto error; + status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg); + if (status < 0) + goto error; + } + /* Enable MB output over MPEG pads and ctl input */ + status = write16(state, SIO_PDR_MON_CFG__A, 0x0000); + if (status < 0) + goto error; + /* Write nomagic word to enable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSDisable(struct drxk_state *state) +{ + dprintk(1, "\n"); + + return MPEGTSConfigurePins(state, false); +} + +static int BLChainCmd(struct drxk_state *state, + u16 romOffset, u16 nrOfElements, u32 timeOut) +{ + u16 blStatus = 0; + int status; + unsigned long end; + + dprintk(1, "\n"); + mutex_lock(&state->mutex); + status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN); + if (status < 0) + goto error; + status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements); + if (status < 0) + goto error; + status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); + if (status < 0) + goto error; + + end = jiffies + msecs_to_jiffies(timeOut); + do { + msleep(1); + status = read16(state, SIO_BL_STATUS__A, &blStatus); + if (status < 0) + goto error; + } while ((blStatus == 0x1) && + ((time_is_after_jiffies(end)))); + + if (blStatus == 0x1) { + printk(KERN_ERR "drxk: SIO not ready\n"); + status = -EINVAL; + goto error2; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; +} + + +static int DownloadMicrocode(struct drxk_state *state, + const u8 pMCImage[], u32 Length) +{ + const u8 *pSrc = pMCImage; + u16 Flags; + u16 Drain; + u32 Address; + u16 nBlocks; + u16 BlockSize; + u16 BlockCRC; + u32 offset = 0; + u32 i; + int status = 0; + + dprintk(1, "\n"); + + /* down the drain (we don care about MAGIC_WORD) */ + Drain = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + nBlocks = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + + for (i = 0; i < nBlocks; i += 1) { + Address = (pSrc[0] << 24) | (pSrc[1] << 16) | + (pSrc[2] << 8) | pSrc[3]; + pSrc += sizeof(u32); + offset += sizeof(u32); + + BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16); + pSrc += sizeof(u16); + offset += sizeof(u16); + + Flags = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + + BlockCRC = (pSrc[0] << 8) | pSrc[1]; + pSrc += sizeof(u16); + offset += sizeof(u16); + + if (offset + BlockSize > Length) { + printk(KERN_ERR "drxk: Firmware is corrupted.\n"); + return -EINVAL; + } + + status = write_block(state, Address, BlockSize, pSrc); + if (status < 0) { + printk(KERN_ERR "drxk: Error %d while loading firmware\n", status); + break; + } + pSrc += BlockSize; + offset += BlockSize; + } + return status; +} + +static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable) +{ + int status; + u16 data = 0; + u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON; + u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED; + unsigned long end; + + dprintk(1, "\n"); + + if (enable == false) { + desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF; + desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN; + } + + status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); + if (status >= 0 && data == desiredStatus) { + /* tokenring already has correct status */ + return status; + } + /* Disable/enable dvbt tokenring bridge */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl); + + end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT); + do { + status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); + if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end)) + break; + msleep(1); + } while (1); + if (data != desiredStatus) { + printk(KERN_ERR "drxk: SIO not ready\n"); + return -EINVAL; + } + return status; +} + +static int MPEGTSStop(struct drxk_state *state) +{ + int status = 0; + u16 fecOcSncMode = 0; + u16 fecOcIprMode = 0; + + dprintk(1, "\n"); + + /* Gracefull shutdown (byte boundaries) */ + status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); + if (status < 0) + goto error; + fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M; + status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); + if (status < 0) + goto error; + + /* Suppress MCLK during absence of data */ + status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode); + if (status < 0) + goto error; + fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M; + status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int scu_command(struct drxk_state *state, + u16 cmd, u8 parameterLen, + u16 *parameter, u8 resultLen, u16 *result) +{ +#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15 +#error DRXK register mapping no longer compatible with this routine! +#endif + u16 curCmd = 0; + int status = -EINVAL; + unsigned long end; + u8 buffer[34]; + int cnt = 0, ii; + const char *p; + char errname[30]; + + dprintk(1, "\n"); + + if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) || + ((resultLen > 0) && (result == NULL))) + goto error; + + mutex_lock(&state->mutex); + + /* assume that the command register is ready + since it is checked afterwards */ + for (ii = parameterLen - 1; ii >= 0; ii -= 1) { + buffer[cnt++] = (parameter[ii] & 0xFF); + buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF); + } + buffer[cnt++] = (cmd & 0xFF); + buffer[cnt++] = ((cmd >> 8) & 0xFF); + + write_block(state, SCU_RAM_PARAM_0__A - + (parameterLen - 1), cnt, buffer); + /* Wait until SCU has processed command */ + end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME); + do { + msleep(1); + status = read16(state, SCU_RAM_COMMAND__A, &curCmd); + if (status < 0) + goto error; + } while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end))); + if (curCmd != DRX_SCU_READY) { + printk(KERN_ERR "drxk: SCU not ready\n"); + status = -EIO; + goto error2; + } + /* read results */ + if ((resultLen > 0) && (result != NULL)) { + s16 err; + int ii; + + for (ii = resultLen - 1; ii >= 0; ii -= 1) { + status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]); + if (status < 0) + goto error; + } + + /* Check if an error was reported by SCU */ + err = (s16)result[0]; + if (err >= 0) + goto error; + + /* check for the known error codes */ + switch (err) { + case SCU_RESULT_UNKCMD: + p = "SCU_RESULT_UNKCMD"; + break; + case SCU_RESULT_UNKSTD: + p = "SCU_RESULT_UNKSTD"; + break; + case SCU_RESULT_SIZE: + p = "SCU_RESULT_SIZE"; + break; + case SCU_RESULT_INVPAR: + p = "SCU_RESULT_INVPAR"; + break; + default: /* Other negative values are errors */ + sprintf(errname, "ERROR: %d\n", err); + p = errname; + } + printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd); + print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt); + status = -EINVAL; + goto error2; + } + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; +} + +static int SetIqmAf(struct drxk_state *state, bool active) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + + /* Configure IQM */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + + if (!active) { + data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY + | IQM_AF_STDBY_STDBY_AMP_STANDBY + | IQM_AF_STDBY_STDBY_PD_STANDBY + | IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY + | IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY); + } else { + data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY) + & (~IQM_AF_STDBY_STDBY_AMP_STANDBY) + & (~IQM_AF_STDBY_STDBY_PD_STANDBY) + & (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY) + & (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY) + ); + } + status = write16(state, IQM_AF_STDBY__A, data); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode) +{ + int status = 0; + u16 sioCcPwdMode = 0; + + dprintk(1, "\n"); + + /* Check arguments */ + if (mode == NULL) + return -EINVAL; + + switch (*mode) { + case DRX_POWER_UP: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE; + break; + case DRXK_POWER_DOWN_OFDM: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM; + break; + case DRXK_POWER_DOWN_CORE: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK; + break; + case DRXK_POWER_DOWN_PLL: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL; + break; + case DRX_POWER_DOWN: + sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC; + break; + default: + /* Unknow sleep mode */ + return -EINVAL; + } + + /* If already in requested power mode, do nothing */ + if (state->m_currentPowerMode == *mode) + return 0; + + /* For next steps make sure to start from DRX_POWER_UP mode */ + if (state->m_currentPowerMode != DRX_POWER_UP) { + status = PowerUpDevice(state); + if (status < 0) + goto error; + status = DVBTEnableOFDMTokenRing(state, true); + if (status < 0) + goto error; + } + + if (*mode == DRX_POWER_UP) { + /* Restore analog & pin configuartion */ + } else { + /* Power down to requested mode */ + /* Backup some register settings */ + /* Set pins with possible pull-ups connected + to them in input mode */ + /* Analog power down */ + /* ADC power down */ + /* Power down device */ + /* stop all comm_exec */ + /* Stop and power down previous standard */ + switch (state->m_OperationMode) { + case OM_DVBT: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownDVBT(state, false); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownQAM(state); + if (status < 0) + goto error; + break; + default: + break; + } + status = DVBTEnableOFDMTokenRing(state, false); + if (status < 0) + goto error; + status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + + if (*mode != DRXK_POWER_DOWN_OFDM) { + state->m_HICfgCtrl |= + SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; + status = HI_CfgCommand(state); + if (status < 0) + goto error; + } + } + state->m_currentPowerMode = *mode; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode) +{ + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + u16 cmdResult = 0; + u16 data = 0; + int status; + + dprintk(1, "\n"); + + status = read16(state, SCU_COMM_EXEC__A, &data); + if (status < 0) + goto error; + if (data == SCU_COMM_EXEC_ACTIVE) { + /* Send OFDM stop command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + /* Send OFDM reset command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + } + + /* Reset datapath for OFDM, processors first */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + + /* powerdown AFE */ + status = SetIqmAf(state, false); + if (status < 0) + goto error; + + /* powerdown to OFDM mode */ + if (setPowerMode) { + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + goto error; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetOperationMode(struct drxk_state *state, + enum OperationMode oMode) +{ + int status = 0; + + dprintk(1, "\n"); + /* + Stop and power down previous standard + TODO investigate total power down instead of partial + power down depending on "previous" standard. + */ + + /* disable HW lock indicator */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* Device is already at the required mode */ + if (state->m_OperationMode == oMode) + return 0; + + switch (state->m_OperationMode) { + /* OM_NONE was added for start up */ + case OM_NONE: + break; + case OM_DVBT: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownDVBT(state, true); + if (status < 0) + goto error; + state->m_OperationMode = OM_NONE; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = PowerDownQAM(state); + if (status < 0) + goto error; + state->m_OperationMode = OM_NONE; + break; + case OM_QAM_ITU_B: + default: + status = -EINVAL; + goto error; + } + + /* + Power up new standard + */ + switch (oMode) { + case OM_DVBT: + state->m_OperationMode = oMode; + status = SetDVBTStandard(state, oMode); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + state->m_OperationMode = oMode; + status = SetQAMStandard(state, oMode); + if (status < 0) + goto error; + break; + case OM_QAM_ITU_B: + default: + status = -EINVAL; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int Start(struct drxk_state *state, s32 offsetFreq, + s32 IntermediateFrequency) +{ + int status = -EINVAL; + + u16 IFreqkHz; + s32 OffsetkHz = offsetFreq / 1000; + + dprintk(1, "\n"); + if (state->m_DrxkState != DRXK_STOPPED && + state->m_DrxkState != DRXK_DTV_STARTED) + goto error; + + state->m_bMirrorFreqSpect = (state->param.inversion == INVERSION_ON); + + if (IntermediateFrequency < 0) { + state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect; + IntermediateFrequency = -IntermediateFrequency; + } + + switch (state->m_OperationMode) { + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + IFreqkHz = (IntermediateFrequency / 1000); + status = SetQAM(state, IFreqkHz, OffsetkHz); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_DTV_STARTED; + break; + case OM_DVBT: + IFreqkHz = (IntermediateFrequency / 1000); + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = SetDVBT(state, IFreqkHz, OffsetkHz); + if (status < 0) + goto error; + status = DVBTStart(state); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_DTV_STARTED; + break; + default: + break; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int ShutDown(struct drxk_state *state) +{ + dprintk(1, "\n"); + + MPEGTSStop(state); + return 0; +} + +static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus, + u32 Time) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if (pLockStatus == NULL) + goto error; + + *pLockStatus = NOT_LOCKED; + + /* define the SCU command code */ + switch (state->m_OperationMode) { + case OM_QAM_ITU_A: + case OM_QAM_ITU_B: + case OM_QAM_ITU_C: + status = GetQAMLockStatus(state, pLockStatus); + break; + case OM_DVBT: + status = GetDVBTLockStatus(state, pLockStatus); + break; + default: + break; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSStart(struct drxk_state *state) +{ + int status; + + u16 fecOcSncMode = 0; + + /* Allow OC to sync again */ + status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode); + if (status < 0) + goto error; + fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M; + status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_UNLOCK__A, 1); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSDtoInit(struct drxk_state *state) +{ + int status; + + dprintk(1, "\n"); + + /* Rate integration settings */ + status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000); + if (status < 0) + goto error; + status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C); + if (status < 0) + goto error; + status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A); + if (status < 0) + goto error; + status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008); + if (status < 0) + goto error; + status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4); + if (status < 0) + goto error; + + /* Additional configuration */ + status = write16(state, FEC_OC_OCR_INVERT__A, 0); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_LWM__A, 2); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_HWM__A, 12); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int MPEGTSDtoSetup(struct drxk_state *state, + enum OperationMode oMode) +{ + int status; + + u16 fecOcRegMode = 0; /* FEC_OC_MODE register value */ + u16 fecOcRegIprMode = 0; /* FEC_OC_IPR_MODE register value */ + u16 fecOcDtoMode = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcFctMode = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcDtoPeriod = 2; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcDtoBurstLen = 188; /* FEC_OC_IPR_INVERT register value */ + u32 fecOcRcnCtlRate = 0; /* FEC_OC_IPR_INVERT register value */ + u16 fecOcTmdMode = 0; + u16 fecOcTmdIntUpdRate = 0; + u32 maxBitRate = 0; + bool staticCLK = false; + + dprintk(1, "\n"); + + /* Check insertion of the Reed-Solomon parity bytes */ + status = read16(state, FEC_OC_MODE__A, &fecOcRegMode); + if (status < 0) + goto error; + status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode); + if (status < 0) + goto error; + fecOcRegMode &= (~FEC_OC_MODE_PARITY__M); + fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); + if (state->m_insertRSByte == true) { + /* enable parity symbol forward */ + fecOcRegMode |= FEC_OC_MODE_PARITY__M; + /* MVAL disable during parity bytes */ + fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; + /* TS burst length to 204 */ + fecOcDtoBurstLen = 204; + } + + /* Check serial or parrallel output */ + fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); + if (state->m_enableParallel == false) { + /* MPEG data output is serial -> set ipr_mode[0] */ + fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M; + } + + switch (oMode) { + case OM_DVBT: + maxBitRate = state->m_DVBTBitrate; + fecOcTmdMode = 3; + fecOcRcnCtlRate = 0xC00000; + staticCLK = state->m_DVBTStaticCLK; + break; + case OM_QAM_ITU_A: /* fallthrough */ + case OM_QAM_ITU_C: + fecOcTmdMode = 0x0004; + fecOcRcnCtlRate = 0xD2B4EE; /* good for >63 Mb/s */ + maxBitRate = state->m_DVBCBitrate; + staticCLK = state->m_DVBCStaticCLK; + break; + default: + status = -EINVAL; + } /* switch (standard) */ + if (status < 0) + goto error; + + /* Configure DTO's */ + if (staticCLK) { + u32 bitRate = 0; + + /* Rational DTO for MCLK source (static MCLK rate), + Dynamic DTO for optimal grouping + (avoid intra-packet gaps), + DTO offset enable to sync TS burst with MSTRT */ + fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M | + FEC_OC_DTO_MODE_OFFSET_ENABLE__M); + fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M | + FEC_OC_FCT_MODE_VIRT_ENA__M); + + /* Check user defined bitrate */ + bitRate = maxBitRate; + if (bitRate > 75900000UL) { /* max is 75.9 Mb/s */ + bitRate = 75900000UL; + } + /* Rational DTO period: + dto_period = (Fsys / bitrate) - 2 + + Result should be floored, + to make sure >= requested bitrate + */ + fecOcDtoPeriod = (u16) (((state->m_sysClockFreq) + * 1000) / bitRate); + if (fecOcDtoPeriod <= 2) + fecOcDtoPeriod = 0; + else + fecOcDtoPeriod -= 2; + fecOcTmdIntUpdRate = 8; + } else { + /* (commonAttr->staticCLK == false) => dynamic mode */ + fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M; + fecOcFctMode = FEC_OC_FCT_MODE__PRE; + fecOcTmdIntUpdRate = 5; + } + + /* Write appropriate registers with requested configuration */ + status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen); + if (status < 0) + goto error; + status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod); + if (status < 0) + goto error; + status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_MODE__A, fecOcRegMode); + if (status < 0) + goto error; + status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode); + if (status < 0) + goto error; + + /* Rate integration settings */ + status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate); + if (status < 0) + goto error; + status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int MPEGTSConfigurePolarity(struct drxk_state *state) +{ + u16 fecOcRegIprInvert = 0; + + /* Data mask for the output data byte */ + u16 InvertDataMask = + FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | + FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | + FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | + FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; + + dprintk(1, "\n"); + + /* Control selective inversion of output bits */ + fecOcRegIprInvert &= (~(InvertDataMask)); + if (state->m_invertDATA == true) + fecOcRegIprInvert |= InvertDataMask; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M)); + if (state->m_invertERR == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); + if (state->m_invertSTR == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); + if (state->m_invertVAL == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M; + fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); + if (state->m_invertCLK == true) + fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M; + + return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert); +} + +#define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000 + +static int SetAgcRf(struct drxk_state *state, + struct SCfgAgc *pAgcCfg, bool isDTV) +{ + int status = -EINVAL; + u16 data = 0; + struct SCfgAgc *pIfAgcSettings; + + dprintk(1, "\n"); + + if (pAgcCfg == NULL) + goto error; + + switch (pAgcCfg->ctrlMode) { + case DRXK_AGC_CTRL_AUTO: + /* Enable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Enable SCU RF AGC loop */ + data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + + /* Polarity */ + if (state->m_RfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Set speed (using complementary reduction value) */ + status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); + if (status < 0) + goto error; + + data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; + data |= (~(pAgcCfg->speed << + SCU_RAM_AGC_KI_RED_RAGC_RED__B) + & SCU_RAM_AGC_KI_RED_RAGC_RED__M); + + status = write16(state, SCU_RAM_AGC_KI_RED__A, data); + if (status < 0) + goto error; + + if (IsDVBT(state)) + pIfAgcSettings = &state->m_dvbtIfAgcCfg; + else if (IsQAM(state)) + pIfAgcSettings = &state->m_qamIfAgcCfg; + else + pIfAgcSettings = &state->m_atvIfAgcCfg; + if (pIfAgcSettings == NULL) { + status = -EINVAL; + goto error; + } + + /* Set TOP, only if IF-AGC is in AUTO mode */ + if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO) + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top); + if (status < 0) + goto error; + + /* Cut-Off current */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent); + if (status < 0) + goto error; + + /* Max. output level */ + status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel); + if (status < 0) + goto error; + + break; + + case DRXK_AGC_CTRL_USER: + /* Enable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU RF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + if (state->m_RfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* SCU c.o.c. to 0, enabling full control range */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0); + if (status < 0) + goto error; + + /* Write value to output pin */ + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_OFF: + /* Disable RF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU RF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + break; + + default: + status = -EINVAL; + + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000 + +static int SetAgcIf(struct drxk_state *state, + struct SCfgAgc *pAgcCfg, bool isDTV) +{ + u16 data = 0; + int status = 0; + struct SCfgAgc *pRfAgcSettings; + + dprintk(1, "\n"); + + switch (pAgcCfg->ctrlMode) { + case DRXK_AGC_CTRL_AUTO: + + /* Enable IF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Enable SCU IF AGC loop */ + data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + + /* Polarity */ + if (state->m_IfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Set speed (using complementary reduction value) */ + status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); + if (status < 0) + goto error; + data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; + data |= (~(pAgcCfg->speed << + SCU_RAM_AGC_KI_RED_IAGC_RED__B) + & SCU_RAM_AGC_KI_RED_IAGC_RED__M); + + status = write16(state, SCU_RAM_AGC_KI_RED__A, data); + if (status < 0) + goto error; + + if (IsQAM(state)) + pRfAgcSettings = &state->m_qamRfAgcCfg; + else + pRfAgcSettings = &state->m_atvRfAgcCfg; + if (pRfAgcSettings == NULL) + return -1; + /* Restore TOP */ + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_USER: + + /* Enable IF AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + + /* Disable SCU IF AGC loop */ + data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + + /* Polarity */ + if (state->m_IfAgcPol) + data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + else + data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + + /* Write value to output pin */ + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel); + if (status < 0) + goto error; + break; + + case DRXK_AGC_CTRL_OFF: + + /* Disable If AGC DAC */ + status = read16(state, IQM_AF_STDBY__A, &data); + if (status < 0) + goto error; + data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; + status = write16(state, IQM_AF_STDBY__A, data); + if (status < 0) + goto error; + + /* Disable SCU IF AGC loop */ + status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); + if (status < 0) + goto error; + data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; + status = write16(state, SCU_RAM_AGC_CONFIG__A, data); + if (status < 0) + goto error; + break; + } /* switch (agcSettingsIf->ctrlMode) */ + + /* always set the top to support + configurations without if-loop */ + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int ReadIFAgc(struct drxk_state *state, u32 *pValue) +{ + u16 agcDacLvl; + int status; + u16 Level = 0; + + dprintk(1, "\n"); + + status = read16(state, IQM_AF_AGC_IF__A, &agcDacLvl); + if (status < 0) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; + } + + *pValue = 0; + + if (agcDacLvl > DRXK_AGC_DAC_OFFSET) + Level = agcDacLvl - DRXK_AGC_DAC_OFFSET; + if (Level < 14000) + *pValue = (14000 - Level) / 4; + else + *pValue = 0; + + return status; +} + +static int GetQAMSignalToNoise(struct drxk_state *state, + s32 *pSignalToNoise) +{ + int status = 0; + u16 qamSlErrPower = 0; /* accum. error between + raw and sliced symbols */ + u32 qamSlSigPower = 0; /* used for MER, depends of + QAM constellation */ + u32 qamSlMer = 0; /* QAM MER */ + + dprintk(1, "\n"); + + /* MER calculation */ + + /* get the register value needed for MER */ + status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower); + if (status < 0) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return -EINVAL; + } + + switch (state->param.u.qam.modulation) { + case QAM_16: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2; + break; + case QAM_32: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2; + break; + case QAM_64: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2; + break; + case QAM_128: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2; + break; + default: + case QAM_256: + qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2; + break; + } + + if (qamSlErrPower > 0) { + qamSlMer = Log10Times100(qamSlSigPower) - + Log10Times100((u32) qamSlErrPower); + } + *pSignalToNoise = qamSlMer; + + return status; +} + +static int GetDVBTSignalToNoise(struct drxk_state *state, + s32 *pSignalToNoise) +{ + int status; + u16 regData = 0; + u32 EqRegTdSqrErrI = 0; + u32 EqRegTdSqrErrQ = 0; + u16 EqRegTdSqrErrExp = 0; + u16 EqRegTdTpsPwrOfs = 0; + u16 EqRegTdReqSmbCnt = 0; + u32 tpsCnt = 0; + u32 SqrErrIQ = 0; + u32 a = 0; + u32 b = 0; + u32 c = 0; + u32 iMER = 0; + u16 transmissionParams = 0; + + dprintk(1, "\n"); + + status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp); + if (status < 0) + goto error; + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, ®Data); + if (status < 0) + goto error; + /* Extend SQR_ERR_I operational range */ + EqRegTdSqrErrI = (u32) regData; + if ((EqRegTdSqrErrExp > 11) && + (EqRegTdSqrErrI < 0x00000FFFUL)) { + EqRegTdSqrErrI += 0x00010000UL; + } + status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®Data); + if (status < 0) + goto error; + /* Extend SQR_ERR_Q operational range */ + EqRegTdSqrErrQ = (u32) regData; + if ((EqRegTdSqrErrExp > 11) && + (EqRegTdSqrErrQ < 0x00000FFFUL)) + EqRegTdSqrErrQ += 0x00010000UL; + + status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams); + if (status < 0) + goto error; + + /* Check input data for MER */ + + /* MER calculation (in 0.1 dB) without math.h */ + if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0)) + iMER = 0; + else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) { + /* No error at all, this must be the HW reset value + * Apparently no first measurement yet + * Set MER to 0.0 */ + iMER = 0; + } else { + SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) << + EqRegTdSqrErrExp; + if ((transmissionParams & + OFDM_SC_RA_RAM_OP_PARAM_MODE__M) + == OFDM_SC_RA_RAM_OP_PARAM_MODE_2K) + tpsCnt = 17; + else + tpsCnt = 68; + + /* IMER = 100 * log10 (x) + where x = (EqRegTdTpsPwrOfs^2 * + EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ + + => IMER = a + b -c + where a = 100 * log10 (EqRegTdTpsPwrOfs^2) + b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt) + c = 100 * log10 (SqrErrIQ) + */ + + /* log(x) x = 9bits * 9bits->18 bits */ + a = Log10Times100(EqRegTdTpsPwrOfs * + EqRegTdTpsPwrOfs); + /* log(x) x = 16bits * 7bits->23 bits */ + b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt); + /* log(x) x = (16bits + 16bits) << 15 ->32 bits */ + c = Log10Times100(SqrErrIQ); + + iMER = a + b; + /* No negative MER, clip to zero */ + if (iMER > c) + iMER -= c; + else + iMER = 0; + } + *pSignalToNoise = iMER; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise) +{ + dprintk(1, "\n"); + + *pSignalToNoise = 0; + switch (state->m_OperationMode) { + case OM_DVBT: + return GetDVBTSignalToNoise(state, pSignalToNoise); + case OM_QAM_ITU_A: + case OM_QAM_ITU_C: + return GetQAMSignalToNoise(state, pSignalToNoise); + default: + break; + } + return 0; +} + +#if 0 +static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality) +{ + /* SNR Values for quasi errorfree reception rom Nordig 2.2 */ + int status = 0; + + dprintk(1, "\n"); + + static s32 QE_SN[] = { + 51, /* QPSK 1/2 */ + 69, /* QPSK 2/3 */ + 79, /* QPSK 3/4 */ + 89, /* QPSK 5/6 */ + 97, /* QPSK 7/8 */ + 108, /* 16-QAM 1/2 */ + 131, /* 16-QAM 2/3 */ + 146, /* 16-QAM 3/4 */ + 156, /* 16-QAM 5/6 */ + 160, /* 16-QAM 7/8 */ + 165, /* 64-QAM 1/2 */ + 187, /* 64-QAM 2/3 */ + 202, /* 64-QAM 3/4 */ + 216, /* 64-QAM 5/6 */ + 225, /* 64-QAM 7/8 */ + }; + + *pQuality = 0; + + do { + s32 SignalToNoise = 0; + u16 Constellation = 0; + u16 CodeRate = 0; + u32 SignalToNoiseRel; + u32 BERQuality; + + status = GetDVBTSignalToNoise(state, &SignalToNoise); + if (status < 0) + break; + status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation); + if (status < 0) + break; + Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M; + + status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate); + if (status < 0) + break; + CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M; + + if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM || + CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8) + break; + SignalToNoiseRel = SignalToNoise - + QE_SN[Constellation * 5 + CodeRate]; + BERQuality = 100; + + if (SignalToNoiseRel < -70) + *pQuality = 0; + else if (SignalToNoiseRel < 30) + *pQuality = ((SignalToNoiseRel + 70) * + BERQuality) / 100; + else + *pQuality = BERQuality; + } while (0); + return 0; +}; + +static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality) +{ + int status = 0; + *pQuality = 0; + + dprintk(1, "\n"); + + do { + u32 SignalToNoise = 0; + u32 BERQuality = 100; + u32 SignalToNoiseRel = 0; + + status = GetQAMSignalToNoise(state, &SignalToNoise); + if (status < 0) + break; + + switch (state->param.u.qam.modulation) { + case QAM_16: + SignalToNoiseRel = SignalToNoise - 200; + break; + case QAM_32: + SignalToNoiseRel = SignalToNoise - 230; + break; /* Not in NorDig */ + case QAM_64: + SignalToNoiseRel = SignalToNoise - 260; + break; + case QAM_128: + SignalToNoiseRel = SignalToNoise - 290; + break; + default: + case QAM_256: + SignalToNoiseRel = SignalToNoise - 320; + break; + } + + if (SignalToNoiseRel < -70) + *pQuality = 0; + else if (SignalToNoiseRel < 30) + *pQuality = ((SignalToNoiseRel + 70) * + BERQuality) / 100; + else + *pQuality = BERQuality; + } while (0); + + return status; +} + +static int GetQuality(struct drxk_state *state, s32 *pQuality) +{ + dprintk(1, "\n"); + + switch (state->m_OperationMode) { + case OM_DVBT: + return GetDVBTQuality(state, pQuality); + case OM_QAM_ITU_A: + return GetDVBCQuality(state, pQuality); + default: + break; + } + + return 0; +} +#endif + +/* Free data ram in SIO HI */ +#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 +#define SIO_HI_RA_RAM_USR_END__A 0x420060 + +#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) +#define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) +#define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ +#define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE + +#define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F) +#define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F) +#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF) + +static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if (state->m_DrxkState == DRXK_UNINITIALIZED) + goto error; + if (state->m_DrxkState == DRXK_POWERED_DOWN) + goto error; + + if (state->no_i2c_bridge) + return 0; + + status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); + if (status < 0) + goto error; + if (bEnableBridge) { + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED); + if (status < 0) + goto error; + } else { + status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN); + if (status < 0) + goto error; + } + + status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetPreSaw(struct drxk_state *state, + struct SCfgPreSaw *pPreSawCfg) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + if ((pPreSawCfg == NULL) + || (pPreSawCfg->reference > IQM_AF_PDREF__M)) + goto error; + + status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int BLDirectCmd(struct drxk_state *state, u32 targetAddr, + u16 romOffset, u16 nrOfElements, u32 timeOut) +{ + u16 blStatus = 0; + u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF); + u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF); + int status; + unsigned long end; + + dprintk(1, "\n"); + + mutex_lock(&state->mutex); + status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT); + if (status < 0) + goto error; + status = write16(state, SIO_BL_TGT_HDR__A, blockbank); + if (status < 0) + goto error; + status = write16(state, SIO_BL_TGT_ADDR__A, offset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_SRC_ADDR__A, romOffset); + if (status < 0) + goto error; + status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements); + if (status < 0) + goto error; + status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); + if (status < 0) + goto error; + + end = jiffies + msecs_to_jiffies(timeOut); + do { + status = read16(state, SIO_BL_STATUS__A, &blStatus); + if (status < 0) + goto error; + } while ((blStatus == 0x1) && time_is_after_jiffies(end)); + if (blStatus == 0x1) { + printk(KERN_ERR "drxk: SIO not ready\n"); + status = -EINVAL; + goto error2; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); +error2: + mutex_unlock(&state->mutex); + return status; + +} + +static int ADCSyncMeasurement(struct drxk_state *state, u16 *count) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + + /* Start measurement */ + status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, IQM_AF_START_LOCK__A, 1); + if (status < 0) + goto error; + + *count = 0; + status = read16(state, IQM_AF_PHASE0__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + status = read16(state, IQM_AF_PHASE1__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + status = read16(state, IQM_AF_PHASE2__A, &data); + if (status < 0) + goto error; + if (data == 127) + *count = *count + 1; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int ADCSynchronization(struct drxk_state *state) +{ + u16 count = 0; + int status; + + dprintk(1, "\n"); + + status = ADCSyncMeasurement(state, &count); + if (status < 0) + goto error; + + if (count == 1) { + /* Try sampling on a diffrent edge */ + u16 clkNeg = 0; + + status = read16(state, IQM_AF_CLKNEG__A, &clkNeg); + if (status < 0) + goto error; + if ((clkNeg | IQM_AF_CLKNEG_CLKNEGDATA__M) == + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) { + clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); + clkNeg |= + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG; + } else { + clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); + clkNeg |= + IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS; + } + status = write16(state, IQM_AF_CLKNEG__A, clkNeg); + if (status < 0) + goto error; + status = ADCSyncMeasurement(state, &count); + if (status < 0) + goto error; + } + + if (count < 2) + status = -EINVAL; +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetFrequencyShifter(struct drxk_state *state, + u16 intermediateFreqkHz, + s32 tunerFreqOffset, bool isDTV) +{ + bool selectPosImage = false; + u32 rfFreqResidual = tunerFreqOffset; + u32 fmFrequencyShift = 0; + bool tunerMirror = !state->m_bMirrorFreqSpect; + u32 adcFreq; + bool adcFlip; + int status; + u32 ifFreqActual; + u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3); + u32 frequencyShift; + bool imageToSelect; + + dprintk(1, "\n"); + + /* + Program frequency shifter + No need to account for mirroring on RF + */ + if (isDTV) { + if ((state->m_OperationMode == OM_QAM_ITU_A) || + (state->m_OperationMode == OM_QAM_ITU_C) || + (state->m_OperationMode == OM_DVBT)) + selectPosImage = true; + else + selectPosImage = false; + } + if (tunerMirror) + /* tuner doesn't mirror */ + ifFreqActual = intermediateFreqkHz + + rfFreqResidual + fmFrequencyShift; + else + /* tuner mirrors */ + ifFreqActual = intermediateFreqkHz - + rfFreqResidual - fmFrequencyShift; + if (ifFreqActual > samplingFrequency / 2) { + /* adc mirrors */ + adcFreq = samplingFrequency - ifFreqActual; + adcFlip = true; + } else { + /* adc doesn't mirror */ + adcFreq = ifFreqActual; + adcFlip = false; + } + + frequencyShift = adcFreq; + imageToSelect = state->m_rfmirror ^ tunerMirror ^ + adcFlip ^ selectPosImage; + state->m_IqmFsRateOfs = + Frac28a((frequencyShift), samplingFrequency); + + if (imageToSelect) + state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1; + + /* Program frequency shifter with tuner offset compensation */ + /* frequencyShift += tunerFreqOffset; TODO */ + status = write32(state, IQM_FS_RATE_OFS_LO__A, + state->m_IqmFsRateOfs); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int InitAGC(struct drxk_state *state, bool isDTV) +{ + u16 ingainTgt = 0; + u16 ingainTgtMin = 0; + u16 ingainTgtMax = 0; + u16 clpCyclen = 0; + u16 clpSumMin = 0; + u16 clpDirTo = 0; + u16 snsSumMin = 0; + u16 snsSumMax = 0; + u16 clpSumMax = 0; + u16 snsDirTo = 0; + u16 kiInnergainMin = 0; + u16 ifIaccuHiTgt = 0; + u16 ifIaccuHiTgtMin = 0; + u16 ifIaccuHiTgtMax = 0; + u16 data = 0; + u16 fastClpCtrlDelay = 0; + u16 clpCtrlMode = 0; + int status = 0; + + dprintk(1, "\n"); + + /* Common settings */ + snsSumMax = 1023; + ifIaccuHiTgtMin = 2047; + clpCyclen = 500; + clpSumMax = 1023; + + /* AGCInit() not available for DVBT; init done in microcode */ + if (!IsQAM(state)) { + printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode); + return -EINVAL; + } + + /* FIXME: Analog TV AGC require different settings */ + + /* Standard specific settings */ + clpSumMin = 8; + clpDirTo = (u16) -9; + clpCtrlMode = 0; + snsSumMin = 8; + snsDirTo = (u16) -9; + kiInnergainMin = (u16) -1030; + ifIaccuHiTgtMax = 0x2380; + ifIaccuHiTgt = 0x2380; + ingainTgtMin = 0x0511; + ingainTgt = 0x0511; + ingainTgtMax = 5119; + fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay; + + status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500); + if (status < 0) + goto error; + + /* Initialize inner-loop KI gain factors */ + status = read16(state, SCU_RAM_AGC_KI__A, &data); + if (status < 0) + goto error; + + data = 0x0657; + data &= ~SCU_RAM_AGC_KI_RF__M; + data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B); + data &= ~SCU_RAM_AGC_KI_IF__M; + data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B); + + status = write16(state, SCU_RAM_AGC_KI__A, data); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr) +{ + int status; + + dprintk(1, "\n"); + if (packetErr == NULL) + status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); + else + status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTScCommand(struct drxk_state *state, + u16 cmd, u16 subcmd, + u16 param0, u16 param1, u16 param2, + u16 param3, u16 param4) +{ + u16 curCmd = 0; + u16 errCode = 0; + u16 retryCnt = 0; + u16 scExec = 0; + int status; + + dprintk(1, "\n"); + status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec); + if (scExec != 1) { + /* SC is not running */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Wait until sc is ready to receive command */ + retryCnt = 0; + do { + msleep(1); + status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); + retryCnt++; + } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); + if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) + goto error; + + /* Write sub-command */ + switch (cmd) { + /* All commands using sub-cmd */ + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd); + if (status < 0) + goto error; + break; + default: + /* Do nothing */ + break; + } + + /* Write needed parameters and the command */ + switch (cmd) { + /* All commands using 5 parameters */ + /* All commands using 4 parameters */ + /* All commands using 3 parameters */ + /* All commands using 2 parameters */ + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1); + /* All commands using 1 parameters */ + case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: + case OFDM_SC_RA_RAM_CMD_USER_IO: + status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0); + /* All commands using 0 parameters */ + case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: + case OFDM_SC_RA_RAM_CMD_NULL: + /* Write command */ + status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd); + break; + default: + /* Unknown command */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Wait until sc is ready processing command */ + retryCnt = 0; + do { + msleep(1); + status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd); + retryCnt++; + } while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES)); + if (retryCnt >= DRXK_MAX_RETRIES && (status < 0)) + goto error; + + /* Check for illegal cmd */ + status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode); + if (errCode == 0xFFFF) { + /* illegal command */ + status = -EINVAL; + } + if (status < 0) + goto error; + + /* Retreive results parameters from SC */ + switch (cmd) { + /* All commands yielding 5 results */ + /* All commands yielding 4 results */ + /* All commands yielding 3 results */ + /* All commands yielding 2 results */ + /* All commands yielding 1 result */ + case OFDM_SC_RA_RAM_CMD_USER_IO: + case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: + status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0)); + /* All commands yielding 0 results */ + case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: + case OFDM_SC_RA_RAM_CMD_SET_TIMER: + case OFDM_SC_RA_RAM_CMD_PROC_START: + case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: + case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: + case OFDM_SC_RA_RAM_CMD_NULL: + break; + default: + /* Unknown command */ + status = -EINVAL; + break; + } /* switch (cmd->cmd) */ +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int PowerUpDVBT(struct drxk_state *state) +{ + enum DRXPowerMode powerMode = DRX_POWER_UP; + int status; + + dprintk(1, "\n"); + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled) +{ + int status; + + dprintk(1, "\n"); + if (*enabled == true) + status = write16(state, IQM_CF_BYPASSDET__A, 0); + else + status = write16(state, IQM_CF_BYPASSDET__A, 1); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +#define DEFAULT_FR_THRES_8K 4000 +static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled) +{ + + int status; + + dprintk(1, "\n"); + if (*enabled == true) { + /* write mask to 1 */ + status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, + DEFAULT_FR_THRES_8K); + } else { + /* write mask to 0 */ + status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int DVBTCtrlSetEchoThreshold(struct drxk_state *state, + struct DRXKCfgDvbtEchoThres_t *echoThres) +{ + u16 data = 0; + int status; + + dprintk(1, "\n"); + status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data); + if (status < 0) + goto error; + + switch (echoThres->fftMode) { + case DRX_FFTMODE_2K: + data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M; + data |= ((echoThres->threshold << + OFDM_SC_RA_RAM_ECHO_THRES_2K__B) + & (OFDM_SC_RA_RAM_ECHO_THRES_2K__M)); + break; + case DRX_FFTMODE_8K: + data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M; + data |= ((echoThres->threshold << + OFDM_SC_RA_RAM_ECHO_THRES_8K__B) + & (OFDM_SC_RA_RAM_ECHO_THRES_8K__M)); + break; + default: + return -EINVAL; + } + + status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int DVBTCtrlSetSqiSpeed(struct drxk_state *state, + enum DRXKCfgDvbtSqiSpeed *speed) +{ + int status = -EINVAL; + + dprintk(1, "\n"); + + switch (*speed) { + case DRXK_DVBT_SQI_SPEED_FAST: + case DRXK_DVBT_SQI_SPEED_MEDIUM: + case DRXK_DVBT_SQI_SPEED_SLOW: + break; + default: + goto error; + } + status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A, + (u16) *speed); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Activate DVBT specific presets +* \param demod instance of demodulator. +* \return DRXStatus_t. +* +* Called in DVBTSetStandard +* +*/ +static int DVBTActivatePresets(struct drxk_state *state) +{ + int status; + bool setincenable = false; + bool setfrenable = true; + + struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K }; + struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K }; + + dprintk(1, "\n"); + status = DVBTCtrlSetIncEnable(state, &setincenable); + if (status < 0) + goto error; + status = DVBTCtrlSetFrEnable(state, &setfrenable); + if (status < 0) + goto error; + status = DVBTCtrlSetEchoThreshold(state, &echoThres2k); + if (status < 0) + goto error; + status = DVBTCtrlSetEchoThreshold(state, &echoThres8k); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Initialize channelswitch-independent settings for DVBT. +* \param demod instance of demodulator. +* \return DRXStatus_t. +* +* For ROM code channel filter taps are loaded from the bootloader. For microcode +* the DVB-T taps from the drxk_filters.h are used. +*/ +static int SetDVBTStandard(struct drxk_state *state, + enum OperationMode oMode) +{ + u16 cmdResult = 0; + u16 data = 0; + int status; + + dprintk(1, "\n"); + + PowerUpDVBT(state); + /* added antenna switch */ + SwitchAntennaToDVBT(state); + /* send OFDM reset command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* send OFDM setenv command */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* reset datapath for OFDM, processors first */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + + /* IQM setup */ + /* synchronize on ofdstate->m_festart */ + status = write16(state, IQM_AF_UPD_SEL__A, 1); + if (status < 0) + goto error; + /* window size for clipping ADC detection */ + status = write16(state, IQM_AF_CLP_LEN__A, 0); + if (status < 0) + goto error; + /* window size for for sense pre-SAW detection */ + status = write16(state, IQM_AF_SNS_LEN__A, 0); + if (status < 0) + goto error; + /* sense threshold for sense pre-SAW detection */ + status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); + if (status < 0) + goto error; + status = SetIqmAf(state, true); + if (status < 0) + goto error; + + status = write16(state, IQM_AF_AGC_RF__A, 0); + if (status < 0) + goto error; + + /* Impulse noise cruncher setup */ + status = write16(state, IQM_AF_INC_LCT__A, 0); /* crunch in IQM_CF */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_DET_LCT__A, 0); /* detect in IQM_CF */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_WND_LEN__A, 3); /* peak detector window length */ + if (status < 0) + goto error; + + status = write16(state, IQM_RC_STRETCH__A, 16); + if (status < 0) + goto error; + status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_DS_ENA__A, 0x4); /* decimate output 2 */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_SCALE__A, 1600); + if (status < 0) + goto error; + status = write16(state, IQM_CF_SCALE_SH__A, 0); + if (status < 0) + goto error; + + /* virtual clipping threshold for clipping ADC detection */ + status = write16(state, IQM_AF_CLP_TH__A, 448); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DATATH__A, 495); /* crunching threshold */ + if (status < 0) + goto error; + + status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + if (status < 0) + goto error; + + status = write16(state, IQM_CF_PKDTH__A, 2); /* peak detector threshold */ + if (status < 0) + goto error; + status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2); + if (status < 0) + goto error; + /* enable power measurement interrupt */ + status = write16(state, IQM_CF_COMM_INT_MSK__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); + if (status < 0) + goto error; + + /* IQM will not be reset from here, sync ADC and update/init AGC */ + status = ADCSynchronization(state); + if (status < 0) + goto error; + status = SetPreSaw(state, &state->m_dvbtPreSawCfg); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true); + if (status < 0) + goto error; + status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true); + if (status < 0) + goto error; + + /* Set Noise Estimation notch width and enable DC fix */ + status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data); + if (status < 0) + goto error; + data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M; + status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data); + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + if (!state->m_DRXK_A3_ROM_CODE) { + /* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay */ + status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay); + if (status < 0) + goto error; + } + + /* OFDM_SC setup */ +#ifdef COMPILE_FOR_NONRT + status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2); + if (status < 0) + goto error; +#endif + + /* FEC setup */ + status = write16(state, FEC_DI_INPUT_CTL__A, 1); /* OFDM input */ + if (status < 0) + goto error; + + +#ifdef COMPILE_FOR_NONRT + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400); + if (status < 0) + goto error; +#else + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000); + if (status < 0) + goto error; +#endif + status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001); + if (status < 0) + goto error; + + /* Setup MPEG bus */ + status = MPEGTSDtoSetup(state, OM_DVBT); + if (status < 0) + goto error; + /* Set DVBT Presets */ + status = DVBTActivatePresets(state); + if (status < 0) + goto error; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ +/** +* \brief Start dvbt demodulating for channel. +* \param demod instance of demodulator. +* \return DRXStatus_t. +*/ +static int DVBTStart(struct drxk_state *state) +{ + u16 param1; + int status; + /* DRXKOfdmScCmd_t scCmd; */ + + dprintk(1, "\n"); + /* Start correct processes to get in lock */ + /* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */ + param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN; + status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0); + if (status < 0) + goto error; + /* Start FEC OC */ + status = MPEGTSStart(state); + if (status < 0) + goto error; + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +/*============================================================================*/ + +/** +* \brief Set up dvbt demodulator for channel. +* \param demod instance of demodulator. +* \return DRXStatus_t. +* // original DVBTSetChannel() +*/ +static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset) +{ + u16 cmdResult = 0; + u16 transmissionParams = 0; + u16 operationMode = 0; + u32 iqmRcRateOfs = 0; + u32 bandwidth = 0; + u16 param1; + int status; + + dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset); + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* Stop processors */ + status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /* Mandatory fix, always stop CP, required to set spl offset back to + hardware default (is set to 0 by ucode during pilot detection */ + status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /*== Write channel settings to device =====================================*/ + + /* mode */ + switch (state->param.u.ofdm.transmission_mode) { + case TRANSMISSION_MODE_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M; + /* fall through , try first guess DRX_FFTMODE_8K */ + case TRANSMISSION_MODE_8K: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K; + break; + case TRANSMISSION_MODE_2K: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K; + break; + } + + /* guard */ + switch (state->param.u.ofdm.guard_interval) { + default: + case GUARD_INTERVAL_AUTO: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M; + /* fall through , try first guess DRX_GUARD_1DIV4 */ + case GUARD_INTERVAL_1_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4; + break; + case GUARD_INTERVAL_1_32: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32; + break; + case GUARD_INTERVAL_1_16: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16; + break; + case GUARD_INTERVAL_1_8: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8; + break; + } + + /* hierarchy */ + switch (state->param.u.ofdm.hierarchy_information) { + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M; + /* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */ + /* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */ + /* break; */ + case HIERARCHY_1: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1; + break; + case HIERARCHY_2: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2; + break; + case HIERARCHY_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4; + break; + } + + + /* constellation */ + switch (state->param.u.ofdm.constellation) { + case QAM_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M; + /* fall through , try first guess DRX_CONSTELLATION_QAM64 */ + case QAM_64: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64; + break; + case QPSK: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK; + break; + case QAM_16: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16; + break; + } +#if 0 + /* No hierachical channels support in BDA */ + /* Priority (only for hierarchical channels) */ + switch (channel->priority) { + case DRX_PRIORITY_LOW: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO; + WR16(devAddr, OFDM_EC_SB_PRIOR__A, + OFDM_EC_SB_PRIOR_LO); + break; + case DRX_PRIORITY_HIGH: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; + WR16(devAddr, OFDM_EC_SB_PRIOR__A, + OFDM_EC_SB_PRIOR_HI)); + break; + case DRX_PRIORITY_UNKNOWN: /* fall through */ + default: + status = -EINVAL; + goto error; + } +#else + /* Set Priorty high */ + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; + status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI); + if (status < 0) + goto error; +#endif + + /* coderate */ + switch (state->param.u.ofdm.code_rate_HP) { + case FEC_AUTO: + default: + operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M; + /* fall through , try first guess DRX_CODERATE_2DIV3 */ + case FEC_2_3: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3; + break; + case FEC_1_2: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2; + break; + case FEC_3_4: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4; + break; + case FEC_5_6: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6; + break; + case FEC_7_8: + transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8; + break; + } + + /* SAW filter selection: normaly not necesarry, but if wanted + the application can select a SAW filter via the driver by using UIOs */ + /* First determine real bandwidth (Hz) */ + /* Also set delay for impulse noise cruncher */ + /* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed + by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC + functions */ + switch (state->param.u.ofdm.bandwidth) { + case BANDWIDTH_AUTO: + case BANDWIDTH_8_MHZ: + bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052); + if (status < 0) + goto error; + /* cochannel protection for PAL 8 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + case BANDWIDTH_7_MHZ: + bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491); + if (status < 0) + goto error; + /* cochannel protection for PAL 7 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + case BANDWIDTH_6_MHZ: + bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ; + status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073); + if (status < 0) + goto error; + /* cochannel protection for NTSC 6 MHz */ + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1); + if (status < 0) + goto error; + break; + default: + status = -EINVAL; + goto error; + } + + if (iqmRcRateOfs == 0) { + /* Now compute IQM_RC_RATE_OFS + (((SysFreq/BandWidth)/2)/2) -1) * 2^23) + => + ((SysFreq / BandWidth) * (2^21)) - (2^23) + */ + /* (SysFreq / BandWidth) * (2^28) */ + /* assert (MAX(sysClk)/MIN(bandwidth) < 16) + => assert(MAX(sysClk) < 16*MIN(bandwidth)) + => assert(109714272 > 48000000) = true so Frac 28 can be used */ + iqmRcRateOfs = Frac28a((u32) + ((state->m_sysClockFreq * + 1000) / 3), bandwidth); + /* (SysFreq / BandWidth) * (2^21), rounding before truncating */ + if ((iqmRcRateOfs & 0x7fL) >= 0x40) + iqmRcRateOfs += 0x80L; + iqmRcRateOfs = iqmRcRateOfs >> 7; + /* ((SysFreq / BandWidth) * (2^21)) - (2^23) */ + iqmRcRateOfs = iqmRcRateOfs - (1 << 23); + } + + iqmRcRateOfs &= + ((((u32) IQM_RC_RATE_OFS_HI__M) << + IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M); + status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs); + if (status < 0) + goto error; + + /* Bandwidth setting done */ + +#if 0 + status = DVBTSetFrequencyShift(demod, channel, tunerOffset); + if (status < 0) + goto error; +#endif + status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); + if (status < 0) + goto error; + + /*== Start SC, write channel settings to SC ===============================*/ + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + /* Enable SC after setting all other parameters */ + status = write16(state, OFDM_SC_COMM_STATE__A, 0); + if (status < 0) + goto error; + status = write16(state, OFDM_SC_COMM_EXEC__A, 1); + if (status < 0) + goto error; + + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* Write SC parameter registers, set all AUTO flags in operation mode */ + param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M | + OFDM_SC_RA_RAM_OP_AUTO_GUARD__M | + OFDM_SC_RA_RAM_OP_AUTO_CONST__M | + OFDM_SC_RA_RAM_OP_AUTO_HIER__M | + OFDM_SC_RA_RAM_OP_AUTO_RATE__M); + status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM, + 0, transmissionParams, param1, 0, 0, 0); + if (status < 0) + goto error; + + if (!state->m_DRXK_A3_ROM_CODE) + status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +/*============================================================================*/ + +/** +* \brief Retreive lock status . +* \param demod Pointer to demodulator instance. +* \param lockStat Pointer to lock status structure. +* \return DRXStatus_t. +* +*/ +static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus) +{ + int status; + const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M | + OFDM_SC_RA_RAM_LOCK_FEC__M); + const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M); + const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M; + + u16 ScRaRamLock = 0; + u16 ScCommExec = 0; + + dprintk(1, "\n"); + + *pLockStatus = NOT_LOCKED; + /* driver 0.9.0 */ + /* Check if SC is running */ + status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec); + if (status < 0) + goto end; + if (ScCommExec == OFDM_SC_COMM_EXEC_STOP) + goto end; + + status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock); + if (status < 0) + goto end; + + if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask) + *pLockStatus = MPEG_LOCK; + else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask) + *pLockStatus = FEC_LOCK; + else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask) + *pLockStatus = DEMOD_LOCK; + else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M) + *pLockStatus = NEVER_LOCK; +end: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int PowerUpQAM(struct drxk_state *state) +{ + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + int status; + + dprintk(1, "\n"); + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + + +/** Power Down QAM */ +static int PowerDownQAM(struct drxk_state *state) +{ + u16 data = 0; + u16 cmdResult; + int status = 0; + + dprintk(1, "\n"); + status = read16(state, SCU_COMM_EXEC__A, &data); + if (status < 0) + goto error; + if (data == SCU_COMM_EXEC_ACTIVE) { + /* + STOP demodulator + QAM and HW blocks + */ + /* stop all comstate->m_exec */ + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + } + /* powerdown AFE */ + status = SetIqmAf(state, false); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief Setup of the QAM Measurement intervals for signal quality +* \param demod instance of demod. +* \param constellation current constellation. +* \return DRXStatus_t. +* +* NOTE: +* Take into account that for certain settings the errorcounters can overflow. +* The implementation does not check this. +* +*/ +static int SetQAMMeasurement(struct drxk_state *state, + enum EDrxkConstellation constellation, + u32 symbolRate) +{ + u32 fecBitsDesired = 0; /* BER accounting period */ + u32 fecRsPeriodTotal = 0; /* Total period */ + u16 fecRsPrescale = 0; /* ReedSolomon Measurement Prescale */ + u16 fecRsPeriod = 0; /* Value for corresponding I2C register */ + int status = 0; + + dprintk(1, "\n"); + + fecRsPrescale = 1; + /* fecBitsDesired = symbolRate [kHz] * + FrameLenght [ms] * + (constellation + 1) * + SyncLoss (== 1) * + ViterbiLoss (==1) + */ + switch (constellation) { + case DRX_CONSTELLATION_QAM16: + fecBitsDesired = 4 * symbolRate; + break; + case DRX_CONSTELLATION_QAM32: + fecBitsDesired = 5 * symbolRate; + break; + case DRX_CONSTELLATION_QAM64: + fecBitsDesired = 6 * symbolRate; + break; + case DRX_CONSTELLATION_QAM128: + fecBitsDesired = 7 * symbolRate; + break; + case DRX_CONSTELLATION_QAM256: + fecBitsDesired = 8 * symbolRate; + break; + default: + status = -EINVAL; + } + if (status < 0) + goto error; + + fecBitsDesired /= 1000; /* symbolRate [Hz] -> symbolRate [kHz] */ + fecBitsDesired *= 500; /* meas. period [ms] */ + + /* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */ + /* fecRsPeriodTotal = fecBitsDesired / 1632 */ + fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1; /* roughly ceil */ + + /* fecRsPeriodTotal = fecRsPrescale * fecRsPeriod */ + fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16); + if (fecRsPrescale == 0) { + /* Divide by zero (though impossible) */ + status = -EINVAL; + if (status < 0) + goto error; + } + fecRsPeriod = + ((u16) fecRsPeriodTotal + + (fecRsPrescale >> 1)) / fecRsPrescale; + + /* write corresponding registers */ + status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod); + if (status < 0) + goto error; + status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale); + if (status < 0) + goto error; + status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetQAM16(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517); + if (status < 0) + goto error; + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16); + if (status < 0) + goto error; + + /* QAM Loop Controller Coeficients */ + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127); + if (status < 0) + goto error; + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM32 specific setup +* \param demod instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM32(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM64 specific setup +* \param demod instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM64(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM128 specific setup +* \param demod: instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM128(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); + if (status < 0) + goto error; + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +/*============================================================================*/ + +/** +* \brief QAM256 specific setup +* \param demod: instance of demod. +* \return DRXStatus_t. +*/ +static int SetQAM256(struct drxk_state *state) +{ + int status = 0; + + dprintk(1, "\n"); + /* QAM Equalizer Setup */ + /* Equalizer */ + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385); + if (status < 0) + goto error; + + /* Decision Feedback Equalizer */ + status = write16(state, QAM_DQ_QUAL_FUN0__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN1__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN2__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN3__A, 8); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN4__A, 6); + if (status < 0) + goto error; + status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); + if (status < 0) + goto error; + + status = write16(state, QAM_SY_SYNC_HWM__A, 5); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_AWM__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_SY_SYNC_LWM__A, 3); + if (status < 0) + goto error; + + /* QAM Slicer Settings */ + + status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256); + if (status < 0) + goto error; + + + /* QAM Loop Controller Coeficients */ + + status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); + if (status < 0) + goto error; + + + /* QAM State Machine (FSM) Thresholds */ + + status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110); + if (status < 0) + goto error; + + status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); + if (status < 0) + goto error; + + + /* QAM FSM Tracking Parameters */ + + status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0); + if (status < 0) + goto error; + status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +/*============================================================================*/ +/** +* \brief Reset QAM block. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ +static int QAMResetQAM(struct drxk_state *state) +{ + int status; + u16 cmdResult; + + dprintk(1, "\n"); + /* Stop QAM comstate->m_exec */ + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); + if (status < 0) + goto error; + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Set QAM symbolrate. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ +static int QAMSetSymbolrate(struct drxk_state *state) +{ + u32 adcFrequency = 0; + u32 symbFreq = 0; + u32 iqmRcRate = 0; + u16 ratesel = 0; + u32 lcSymbRate = 0; + int status; + + dprintk(1, "\n"); + /* Select & calculate correct IQM rate */ + adcFrequency = (state->m_sysClockFreq * 1000) / 3; + ratesel = 0; + /* printk(KERN_DEBUG "drxk: SR %d\n", state->param.u.qam.symbol_rate); */ + if (state->param.u.qam.symbol_rate <= 1188750) + ratesel = 3; + else if (state->param.u.qam.symbol_rate <= 2377500) + ratesel = 2; + else if (state->param.u.qam.symbol_rate <= 4755000) + ratesel = 1; + status = write16(state, IQM_FD_RATESEL__A, ratesel); + if (status < 0) + goto error; + + /* + IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23) + */ + symbFreq = state->param.u.qam.symbol_rate * (1 << ratesel); + if (symbFreq == 0) { + /* Divide by zero */ + status = -EINVAL; + goto error; + } + iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) + + (Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) - + (1 << 23); + status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate); + if (status < 0) + goto error; + state->m_iqmRcRate = iqmRcRate; + /* + LcSymbFreq = round (.125 * symbolrate / adcFreq * (1<<15)) + */ + symbFreq = state->param.u.qam.symbol_rate; + if (adcFrequency == 0) { + /* Divide by zero */ + status = -EINVAL; + goto error; + } + lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) + + (Frac28a((symbFreq % adcFrequency), adcFrequency) >> + 16); + if (lcSymbRate > 511) + lcSymbRate = 511; + status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate); + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +/*============================================================================*/ + +/** +* \brief Get QAM lock status. +* \param demod: instance of demod. +* \param channel: pointer to channel data. +* \return DRXStatus_t. +*/ + +static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus) +{ + int status; + u16 Result[2] = { 0, 0 }; + + dprintk(1, "\n"); + *pLockStatus = NOT_LOCKED; + status = scu_command(state, + SCU_RAM_COMMAND_STANDARD_QAM | + SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2, + Result); + if (status < 0) + printk(KERN_ERR "drxk: %s status = %08x\n", __func__, status); + + if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) { + /* 0x0000 NOT LOCKED */ + } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) { + /* 0x4000 DEMOD LOCKED */ + *pLockStatus = DEMOD_LOCK; + } else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) { + /* 0x8000 DEMOD + FEC LOCKED (system lock) */ + *pLockStatus = MPEG_LOCK; + } else { + /* 0xC000 NEVER LOCKED */ + /* (system will never be able to lock to the signal) */ + /* TODO: check this, intermediate & standard specific lock states are not + taken into account here */ + *pLockStatus = NEVER_LOCK; + } + return status; +} + +#define QAM_MIRROR__M 0x03 +#define QAM_MIRROR_NORMAL 0x00 +#define QAM_MIRRORED 0x01 +#define QAM_MIRROR_AUTO_ON 0x02 +#define QAM_LOCKRANGE__M 0x10 +#define QAM_LOCKRANGE_NORMAL 0x10 + +static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz, + s32 tunerFreqOffset) +{ + int status; + u16 setParamParameters[4] = { 0, 0, 0, 0 }; + u16 cmdResult; + + dprintk(1, "\n"); + /* + * STEP 1: reset demodulator + * resets FEC DI and FEC RS + * resets QAM block + * resets SCU variables + */ + status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = QAMResetQAM(state); + if (status < 0) + goto error; + + /* + * STEP 2: configure demodulator + * -set params; resets IQM,QAM,FEC HW; initializes some + * SCU variables + */ + status = QAMSetSymbolrate(state); + if (status < 0) + goto error; + + /* Set params */ + switch (state->param.u.qam.modulation) { + case QAM_256: + state->m_Constellation = DRX_CONSTELLATION_QAM256; + break; + case QAM_AUTO: + case QAM_64: + state->m_Constellation = DRX_CONSTELLATION_QAM64; + break; + case QAM_16: + state->m_Constellation = DRX_CONSTELLATION_QAM16; + break; + case QAM_32: + state->m_Constellation = DRX_CONSTELLATION_QAM32; + break; + case QAM_128: + state->m_Constellation = DRX_CONSTELLATION_QAM128; + break; + default: + status = -EINVAL; + break; + } + if (status < 0) + goto error; + setParamParameters[0] = state->m_Constellation; /* constellation */ + setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ + if (state->m_OperationMode == OM_QAM_ITU_C) + setParamParameters[2] = QAM_TOP_ANNEX_C; + else + setParamParameters[2] = QAM_TOP_ANNEX_A; + setParamParameters[3] |= (QAM_MIRROR_AUTO_ON); + /* Env parameters */ + /* check for LOCKRANGE Extented */ + /* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */ + + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult); + if (status < 0) { + /* Fall-back to the simpler call */ + if (state->m_OperationMode == OM_QAM_ITU_C) + setParamParameters[0] = QAM_TOP_ANNEX_C; + else + setParamParameters[0] = QAM_TOP_ANNEX_A; + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult); + if (status < 0) + goto error; + + setParamParameters[0] = state->m_Constellation; /* constellation */ + setParamParameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult); + } + if (status < 0) + goto error; + + /* + * STEP 3: enable the system in a mode where the ADC provides valid + * signal setup constellation independent registers + */ +#if 0 + status = SetFrequency(channel, tunerFreqOffset)); + if (status < 0) + goto error; +#endif + status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true); + if (status < 0) + goto error; + + /* Setup BER measurement */ + status = SetQAMMeasurement(state, state->m_Constellation, state->param.u. qam.symbol_rate); + if (status < 0) + goto error; + + /* Reset default values */ + status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE); + if (status < 0) + goto error; + status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE); + if (status < 0) + goto error; + + /* Reset default LC values */ + status = write16(state, QAM_LC_RATE_LIMIT__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_LPF_FACTORP__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_LPF_FACTORI__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_MODE__A, 7); + if (status < 0) + goto error; + + status = write16(state, QAM_LC_QUAL_TAB0__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB1__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB2__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB3__A, 1); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB4__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB5__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB6__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB8__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB9__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB10__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB12__A, 2); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB15__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB16__A, 3); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB20__A, 4); + if (status < 0) + goto error; + status = write16(state, QAM_LC_QUAL_TAB25__A, 4); + if (status < 0) + goto error; + + /* Mirroring, QAM-block starting point not inverted */ + status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* STEP 4: constellation specific setup */ + switch (state->param.u.qam.modulation) { + case QAM_16: + status = SetQAM16(state); + break; + case QAM_32: + status = SetQAM32(state); + break; + case QAM_AUTO: + case QAM_64: + status = SetQAM64(state); + break; + case QAM_128: + status = SetQAM128(state); + break; + case QAM_256: + status = SetQAM256(state); + break; + default: + status = -EINVAL; + break; + } + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + + /* Re-configure MPEG output, requires knowledge of channel bitrate */ + /* extAttr->currentChannel.constellation = channel->constellation; */ + /* extAttr->currentChannel.symbolrate = channel->symbolrate; */ + status = MPEGTSDtoSetup(state, state->m_OperationMode); + if (status < 0) + goto error; + + /* Start processes */ + status = MPEGTSStart(state); + if (status < 0) + goto error; + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); + if (status < 0) + goto error; + + /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ + status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult); + if (status < 0) + goto error; + + /* update global DRXK data container */ +/*? extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */ + +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SetQAMStandard(struct drxk_state *state, + enum OperationMode oMode) +{ + int status; +#ifdef DRXK_QAM_TAPS +#define DRXK_QAMA_TAPS_SELECT +#include "drxk_filters.h" +#undef DRXK_QAMA_TAPS_SELECT +#endif + + dprintk(1, "\n"); + + /* added antenna switch */ + SwitchAntennaToQAM(state); + + /* Ensure correct power-up mode */ + status = PowerUpQAM(state); + if (status < 0) + goto error; + /* Reset QAM block */ + status = QAMResetQAM(state); + if (status < 0) + goto error; + + /* Setup IQM */ + + status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); + if (status < 0) + goto error; + status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); + if (status < 0) + goto error; + + /* Upload IQM Channel Filter settings by + boot loader from ROM table */ + switch (oMode) { + case OM_QAM_ITU_A: + status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + break; + case OM_QAM_ITU_C: + status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + if (status < 0) + goto error; + status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); + break; + default: + status = -EINVAL; + } + if (status < 0) + goto error; + + status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B)); + if (status < 0) + goto error; + status = write16(state, IQM_CF_SYMMETRIC__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B))); + if (status < 0) + goto error; + + status = write16(state, IQM_RC_STRETCH__A, 21); + if (status < 0) + goto error; + status = write16(state, IQM_AF_CLP_LEN__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_AF_CLP_TH__A, 448); + if (status < 0) + goto error; + status = write16(state, IQM_AF_SNS_LEN__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0); + if (status < 0) + goto error; + + status = write16(state, IQM_FS_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_RC_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_ADJ_SEL__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_AF_UPD_SEL__A, 0); + if (status < 0) + goto error; + + /* IQM Impulse Noise Processing Unit */ + status = write16(state, IQM_CF_CLP_VAL__A, 500); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DATATH__A, 1000); + if (status < 0) + goto error; + status = write16(state, IQM_CF_BYPASSDET__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_DET_LCT__A, 0); + if (status < 0) + goto error; + status = write16(state, IQM_CF_WND_LEN__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_CF_PKDTH__A, 1); + if (status < 0) + goto error; + status = write16(state, IQM_AF_INC_BYPASS__A, 1); + if (status < 0) + goto error; + + /* turn on IQMAF. Must be done before setAgc**() */ + status = SetIqmAf(state, true); + if (status < 0) + goto error; + status = write16(state, IQM_AF_START_LOCK__A, 0x01); + if (status < 0) + goto error; + + /* IQM will not be reset from here, sync ADC and update/init AGC */ + status = ADCSynchronization(state); + if (status < 0) + goto error; + + /* Set the FSM step period */ + status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000); + if (status < 0) + goto error; + + /* Halt SCU to enable safe non-atomic accesses */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); + if (status < 0) + goto error; + + /* No more resets of the IQM, current standard correctly set => + now AGCs can be configured. */ + + status = InitAGC(state, true); + if (status < 0) + goto error; + status = SetPreSaw(state, &(state->m_qamPreSawCfg)); + if (status < 0) + goto error; + + /* Configure AGC's */ + status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true); + if (status < 0) + goto error; + status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true); + if (status < 0) + goto error; + + /* Activate SCU to enable SCU commands */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int WriteGPIO(struct drxk_state *state) +{ + int status; + u16 value = 0; + + dprintk(1, "\n"); + /* stop lock indicator process */ + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + + /* Write magic word to enable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); + if (status < 0) + goto error; + + if (state->m_hasSAWSW) { + if (state->UIO_mask & 0x0001) { /* UIO-1 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0001) == 0) + value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ + else + value |= 0x8000; /* write one to 15th bit - 1st UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + if (state->UIO_mask & 0x0002) { /* UIO-2 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0002) == 0) + value &= 0xBFFF; /* write zero to 14th bit - 2st UIO */ + else + value |= 0x4000; /* write one to 14th bit - 2st UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + if (state->UIO_mask & 0x0004) { /* UIO-3 */ + /* write to io pad configuration register - output mode */ + status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg); + if (status < 0) + goto error; + + /* use corresponding bit in io data output registar */ + status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); + if (status < 0) + goto error; + if ((state->m_GPIO & 0x0004) == 0) + value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ + else + value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ + /* write back to io data output register */ + status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); + if (status < 0) + goto error; + } + } + /* Write magic word to disable pdr reg write */ + status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SwitchAntennaToQAM(struct drxk_state *state) +{ + int status = 0; + bool gpio_state; + + dprintk(1, "\n"); + + if (!state->antenna_gpio) + return 0; + + gpio_state = state->m_GPIO & state->antenna_gpio; + + if (state->antenna_dvbt ^ gpio_state) { + /* Antenna is on DVB-T mode. Switch */ + if (state->antenna_dvbt) + state->m_GPIO &= ~state->antenna_gpio; + else + state->m_GPIO |= state->antenna_gpio; + status = WriteGPIO(state); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + +static int SwitchAntennaToDVBT(struct drxk_state *state) +{ + int status = 0; + bool gpio_state; + + dprintk(1, "\n"); + + if (!state->antenna_gpio) + return 0; + + gpio_state = state->m_GPIO & state->antenna_gpio; + + if (!(state->antenna_dvbt ^ gpio_state)) { + /* Antenna is on DVB-C mode. Switch */ + if (state->antenna_dvbt) + state->m_GPIO |= state->antenna_gpio; + else + state->m_GPIO &= ~state->antenna_gpio; + status = WriteGPIO(state); + } + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; +} + + +static int PowerDownDevice(struct drxk_state *state) +{ + /* Power down to requested mode */ + /* Backup some register settings */ + /* Set pins with possible pull-ups connected to them in input mode */ + /* Analog power down */ + /* ADC power down */ + /* Power down device */ + int status; + + dprintk(1, "\n"); + if (state->m_bPDownOpenBridge) { + /* Open I2C bridge before power down of DRXK */ + status = ConfigureI2CBridge(state, true); + if (status < 0) + goto error; + } + /* driver 0.9.0 */ + status = DVBTEnableOFDMTokenRing(state, false); + if (status < 0) + goto error; + + status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; + status = HI_CfgCommand(state); +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static int load_microcode(struct drxk_state *state, const char *mc_name) +{ + const struct firmware *fw = NULL; + int err = 0; + + dprintk(1, "\n"); + + err = request_firmware(&fw, mc_name, state->i2c->dev.parent); + if (err < 0) { + printk(KERN_ERR + "drxk: Could not load firmware file %s.\n", mc_name); + printk(KERN_INFO + "drxk: Copy %s to your hotplug directory!\n", mc_name); + return err; + } + err = DownloadMicrocode(state, fw->data, fw->size); + release_firmware(fw); + return err; +} + +static int init_drxk(struct drxk_state *state) +{ + int status = 0; + enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM; + u16 driverVersion; + + dprintk(1, "\n"); + if ((state->m_DrxkState == DRXK_UNINITIALIZED)) { + status = PowerUpDevice(state); + if (status < 0) + goto error; + status = DRXX_Open(state); + if (status < 0) + goto error; + /* Soft reset of OFDM-, sys- and osc-clockdomain */ + status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M); + if (status < 0) + goto error; + status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); + if (status < 0) + goto error; + /* TODO is this needed, if yes how much delay in worst case scenario */ + msleep(1); + state->m_DRXK_A3_PATCH_CODE = true; + status = GetDeviceCapabilities(state); + if (status < 0) + goto error; + + /* Bridge delay, uses oscilator clock */ + /* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */ + /* SDA brdige delay */ + state->m_HICfgBridgeDelay = + (u16) ((state->m_oscClockFreq / 1000) * + HI_I2C_BRIDGE_DELAY) / 1000; + /* Clipping */ + if (state->m_HICfgBridgeDelay > + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) { + state->m_HICfgBridgeDelay = + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; + } + /* SCL bridge delay, same as SDA for now */ + state->m_HICfgBridgeDelay += + state->m_HICfgBridgeDelay << + SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B; + + status = InitHI(state); + if (status < 0) + goto error; + /* disable various processes */ +#if NOA1ROM + if (!(state->m_DRXK_A1_ROM_CODE) + && !(state->m_DRXK_A2_ROM_CODE)) +#endif + { + status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); + if (status < 0) + goto error; + } + + /* disable MPEG port */ + status = MPEGTSDisable(state); + if (status < 0) + goto error; + + /* Stop AUD and SCU */ + status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP); + if (status < 0) + goto error; + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP); + if (status < 0) + goto error; + + /* enable token-ring bus through OFDM block for possible ucode upload */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON); + if (status < 0) + goto error; + + /* include boot loader section */ + status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = BLChainCmd(state, 0, 6, 100); + if (status < 0) + goto error; + + if (!state->microcode_name) + load_microcode(state, "drxk_a3.mc"); + else + load_microcode(state, state->microcode_name); + + /* disable token-ring bus through OFDM block for possible ucode upload */ + status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF); + if (status < 0) + goto error; + + /* Run SCU for a little while to initialize microcode version numbers */ + status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); + if (status < 0) + goto error; + status = DRXX_Open(state); + if (status < 0) + goto error; + /* added for test */ + msleep(30); + + powerMode = DRXK_POWER_DOWN_OFDM; + status = CtrlPowerMode(state, &powerMode); + if (status < 0) + goto error; + + /* Stamp driver version number in SCU data RAM in BCD code + Done to enable field application engineers to retreive drxdriver version + via I2C from SCU RAM. + Not using SCU command interface for SCU register access since no + microcode may be present. + */ + driverVersion = + (((DRXK_VERSION_MAJOR / 100) % 10) << 12) + + (((DRXK_VERSION_MAJOR / 10) % 10) << 8) + + ((DRXK_VERSION_MAJOR % 10) << 4) + + (DRXK_VERSION_MINOR % 10); + status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion); + if (status < 0) + goto error; + driverVersion = + (((DRXK_VERSION_PATCH / 1000) % 10) << 12) + + (((DRXK_VERSION_PATCH / 100) % 10) << 8) + + (((DRXK_VERSION_PATCH / 10) % 10) << 4) + + (DRXK_VERSION_PATCH % 10); + status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion); + if (status < 0) + goto error; + + printk(KERN_INFO "DRXK driver version %d.%d.%d\n", + DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR, + DRXK_VERSION_PATCH); + + /* Dirty fix of default values for ROM/PATCH microcode + Dirty because this fix makes it impossible to setup suitable values + before calling DRX_Open. This solution requires changes to RF AGC speed + to be done via the CTRL function after calling DRX_Open */ + + /* m_dvbtRfAgcCfg.speed = 3; */ + + /* Reset driver debug flags to 0 */ + status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0); + if (status < 0) + goto error; + /* driver 0.9.0 */ + /* Setup FEC OC: + NOTE: No more full FEC resets allowed afterwards!! */ + status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP); + if (status < 0) + goto error; + /* MPEGTS functions are still the same */ + status = MPEGTSDtoInit(state); + if (status < 0) + goto error; + status = MPEGTSStop(state); + if (status < 0) + goto error; + status = MPEGTSConfigurePolarity(state); + if (status < 0) + goto error; + status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput); + if (status < 0) + goto error; + /* added: configure GPIO */ + status = WriteGPIO(state); + if (status < 0) + goto error; + + state->m_DrxkState = DRXK_STOPPED; + + if (state->m_bPowerDown) { + status = PowerDownDevice(state); + if (status < 0) + goto error; + state->m_DrxkState = DRXK_POWERED_DOWN; + } else + state->m_DrxkState = DRXK_STOPPED; + } +error: + if (status < 0) + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + + return status; +} + +static void drxk_c_release(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + kfree(state); +} + +static int drxk_c_init(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + if (mutex_trylock(&state->ctlock) == 0) + return -EBUSY; + SetOperationMode(state, OM_QAM_ITU_A); + return 0; +} + +static int drxk_c_sleep(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + ShutDown(state); + mutex_unlock(&state->ctlock); + return 0; +} + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "%s\n", enable ? "enable" : "disable"); + return ConfigureI2CBridge(state, enable ? true : false); +} + +static int drxk_set_parameters(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct drxk_state *state = fe->demodulator_priv; + u32 IF; + + dprintk(1, "\n"); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + state->param = *p; + fe->ops.tuner_ops.get_frequency(fe, &IF); + Start(state, 0, IF); + + /* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */ + + return 0; +} + +static int drxk_c_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + dprintk(1, "\n"); + return 0; +} + +static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct drxk_state *state = fe->demodulator_priv; + u32 stat; + + dprintk(1, "\n"); + *status = 0; + GetLockStatus(state, &stat, 0); + if (stat == MPEG_LOCK) + *status |= 0x1f; + if (stat == FEC_LOCK) + *status |= 0x0f; + if (stat == DEMOD_LOCK) + *status |= 0x07; + return 0; +} + +static int drxk_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + dprintk(1, "\n"); + + *ber = 0; + return 0; +} + +static int drxk_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct drxk_state *state = fe->demodulator_priv; + u32 val = 0; + + dprintk(1, "\n"); + ReadIFAgc(state, &val); + *strength = val & 0xffff; + return 0; +} + +static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct drxk_state *state = fe->demodulator_priv; + s32 snr2; + + dprintk(1, "\n"); + GetSignalToNoise(state, &snr2); + *snr = snr2 & 0xffff; + return 0; +} + +static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct drxk_state *state = fe->demodulator_priv; + u16 err; + + dprintk(1, "\n"); + DVBTQAMGetAccPktErr(state, &err); + *ucblocks = (u32) err; + return 0; +} + +static int drxk_c_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings + *sets) +{ + dprintk(1, "\n"); + sets->min_delay_ms = 3000; + sets->max_drift = 0; + sets->step_size = 0; + return 0; +} + +static void drxk_t_release(struct dvb_frontend *fe) +{ + /* + * There's nothing to release here, as the state struct + * is already freed by drxk_c_release. + */ +} + +static int drxk_t_init(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + if (mutex_trylock(&state->ctlock) == 0) + return -EBUSY; + SetOperationMode(state, OM_DVBT); + return 0; +} + +static int drxk_t_sleep(struct dvb_frontend *fe) +{ + struct drxk_state *state = fe->demodulator_priv; + + dprintk(1, "\n"); + mutex_unlock(&state->ctlock); + return 0; +} + +static int drxk_t_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + dprintk(1, "\n"); + + return 0; +} + +static struct dvb_frontend_ops drxk_c_ops = { + .info = { + .name = "DRXK DVB-C", + .type = FE_QAM, + .frequency_stepsize = 62500, + .frequency_min = 47000000, + .frequency_max = 862000000, + .symbol_rate_min = 870000, + .symbol_rate_max = 11700000, + .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO}, + .release = drxk_c_release, + .init = drxk_c_init, + .sleep = drxk_c_sleep, + .i2c_gate_ctrl = drxk_gate_ctrl, + + .set_frontend = drxk_set_parameters, + .get_frontend = drxk_c_get_frontend, + .get_tune_settings = drxk_c_get_tune_settings, + + .read_status = drxk_read_status, + .read_ber = drxk_read_ber, + .read_signal_strength = drxk_read_signal_strength, + .read_snr = drxk_read_snr, + .read_ucblocks = drxk_read_ucblocks, +}; + +static struct dvb_frontend_ops drxk_t_ops = { + .info = { + .name = "DRXK DVB-T", + .type = FE_OFDM, + .frequency_min = 47125000, + .frequency_max = 865000000, + .frequency_stepsize = 166667, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS}, + .release = drxk_t_release, + .init = drxk_t_init, + .sleep = drxk_t_sleep, + .i2c_gate_ctrl = drxk_gate_ctrl, + + .set_frontend = drxk_set_parameters, + .get_frontend = drxk_t_get_frontend, + + .read_status = drxk_read_status, + .read_ber = drxk_read_ber, + .read_signal_strength = drxk_read_signal_strength, + .read_snr = drxk_read_snr, + .read_ucblocks = drxk_read_ucblocks, +}; + +struct dvb_frontend *drxk_attach(const struct drxk_config *config, + struct i2c_adapter *i2c, + struct dvb_frontend **fe_t) +{ + struct drxk_state *state = NULL; + u8 adr = config->adr; + + dprintk(1, "\n"); + state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL); + if (!state) + return NULL; + + state->i2c = i2c; + state->demod_address = adr; + state->single_master = config->single_master; + state->microcode_name = config->microcode_name; + state->no_i2c_bridge = config->no_i2c_bridge; + state->antenna_gpio = config->antenna_gpio; + state->antenna_dvbt = config->antenna_dvbt; + + /* NOTE: as more UIO bits will be used, add them to the mask */ + state->UIO_mask = config->antenna_gpio; + + /* Default gpio to DVB-C */ + if (!state->antenna_dvbt && state->antenna_gpio) + state->m_GPIO |= state->antenna_gpio; + else + state->m_GPIO &= ~state->antenna_gpio; + + mutex_init(&state->mutex); + mutex_init(&state->ctlock); + + memcpy(&state->c_frontend.ops, &drxk_c_ops, + sizeof(struct dvb_frontend_ops)); + memcpy(&state->t_frontend.ops, &drxk_t_ops, + sizeof(struct dvb_frontend_ops)); + state->c_frontend.demodulator_priv = state; + state->t_frontend.demodulator_priv = state; + + init_state(state); + if (init_drxk(state) < 0) + goto error; + *fe_t = &state->t_frontend; + + return &state->c_frontend; + +error: + printk(KERN_ERR "drxk: not found\n"); + kfree(state); + return NULL; +} +EXPORT_SYMBOL(drxk_attach); + +MODULE_DESCRIPTION("DRX-K driver"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h new file mode 100644 index 0000000..a05c32e --- /dev/null +++ b/drivers/media/dvb/frontends/drxk_hard.h @@ -0,0 +1,348 @@ +#include "drxk_map.h" + +#define DRXK_VERSION_MAJOR 0 +#define DRXK_VERSION_MINOR 9 +#define DRXK_VERSION_PATCH 4300 + +#define HI_I2C_DELAY 42 +#define HI_I2C_BRIDGE_DELAY 350 +#define DRXK_MAX_RETRIES 100 + +#define DRIVER_4400 1 + +#define DRXX_JTAGID 0x039210D9 +#define DRXX_J_JTAGID 0x239310D9 +#define DRXX_K_JTAGID 0x039210D9 + +#define DRX_UNKNOWN 254 +#define DRX_AUTO 255 + +#define DRX_SCU_READY 0 +#define DRXK_MAX_WAITTIME (200) +#define SCU_RESULT_OK 0 +#define SCU_RESULT_SIZE -4 +#define SCU_RESULT_INVPAR -3 +#define SCU_RESULT_UNKSTD -2 +#define SCU_RESULT_UNKCMD -1 + +#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT +#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200) +#endif + +#define DRXK_8VSB_MPEG_BIT_RATE 19392658UL /*bps*/ +#define DRXK_DVBT_MPEG_BIT_RATE 32000000UL /*bps*/ +#define DRXK_QAM16_MPEG_BIT_RATE 27000000UL /*bps*/ +#define DRXK_QAM32_MPEG_BIT_RATE 33000000UL /*bps*/ +#define DRXK_QAM64_MPEG_BIT_RATE 40000000UL /*bps*/ +#define DRXK_QAM128_MPEG_BIT_RATE 46000000UL /*bps*/ +#define DRXK_QAM256_MPEG_BIT_RATE 52000000UL /*bps*/ +#define DRXK_MAX_MPEG_BIT_RATE 52000000UL /*bps*/ + +#define IQM_CF_OUT_ENA_OFDM__M 0x4 +#define IQM_FS_ADJ_SEL_B_QAM 0x1 +#define IQM_FS_ADJ_SEL_B_OFF 0x0 +#define IQM_FS_ADJ_SEL_B_VSB 0x2 +#define IQM_RC_ADJ_SEL_B_OFF 0x0 +#define IQM_RC_ADJ_SEL_B_QAM 0x1 +#define IQM_RC_ADJ_SEL_B_VSB 0x2 + +enum OperationMode { + OM_NONE, + OM_QAM_ITU_A, + OM_QAM_ITU_B, + OM_QAM_ITU_C, + OM_DVBT +}; + +enum DRXPowerMode { + DRX_POWER_UP = 0, + DRX_POWER_MODE_1, + DRX_POWER_MODE_2, + DRX_POWER_MODE_3, + DRX_POWER_MODE_4, + DRX_POWER_MODE_5, + DRX_POWER_MODE_6, + DRX_POWER_MODE_7, + DRX_POWER_MODE_8, + + DRX_POWER_MODE_9, + DRX_POWER_MODE_10, + DRX_POWER_MODE_11, + DRX_POWER_MODE_12, + DRX_POWER_MODE_13, + DRX_POWER_MODE_14, + DRX_POWER_MODE_15, + DRX_POWER_MODE_16, + DRX_POWER_DOWN = 255 +}; + + +/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */ +#ifndef DRXK_POWER_DOWN_OFDM +#define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1 +#endif + +/** /brief Intermediate power mode for DRXK, power down core (sysclk) */ +#ifndef DRXK_POWER_DOWN_CORE +#define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9 +#endif + +/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */ +#ifndef DRXK_POWER_DOWN_PLL +#define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10 +#endif + + +enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF }; +enum EDrxkState { DRXK_UNINITIALIZED = 0, DRXK_STOPPED, DRXK_DTV_STARTED, DRXK_ATV_STARTED, DRXK_POWERED_DOWN }; +enum EDrxkCoefArrayIndex { + DRXK_COEF_IDX_MN = 0, + DRXK_COEF_IDX_FM , + DRXK_COEF_IDX_L , + DRXK_COEF_IDX_LP , + DRXK_COEF_IDX_BG , + DRXK_COEF_IDX_DK , + DRXK_COEF_IDX_I , + DRXK_COEF_IDX_MAX +}; +enum EDrxkSifAttenuation { + DRXK_SIF_ATTENUATION_0DB, + DRXK_SIF_ATTENUATION_3DB, + DRXK_SIF_ATTENUATION_6DB, + DRXK_SIF_ATTENUATION_9DB +}; +enum EDrxkConstellation { + DRX_CONSTELLATION_BPSK = 0, + DRX_CONSTELLATION_QPSK, + DRX_CONSTELLATION_PSK8, + DRX_CONSTELLATION_QAM16, + DRX_CONSTELLATION_QAM32, + DRX_CONSTELLATION_QAM64, + DRX_CONSTELLATION_QAM128, + DRX_CONSTELLATION_QAM256, + DRX_CONSTELLATION_QAM512, + DRX_CONSTELLATION_QAM1024, + DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN, + DRX_CONSTELLATION_AUTO = DRX_AUTO +}; +enum EDrxkInterleaveMode { + DRXK_QAM_I12_J17 = 16, + DRXK_QAM_I_UNKNOWN = DRX_UNKNOWN +}; +enum { + DRXK_SPIN_A1 = 0, + DRXK_SPIN_A2, + DRXK_SPIN_A3, + DRXK_SPIN_UNKNOWN +}; + +enum DRXKCfgDvbtSqiSpeed { + DRXK_DVBT_SQI_SPEED_FAST = 0, + DRXK_DVBT_SQI_SPEED_MEDIUM, + DRXK_DVBT_SQI_SPEED_SLOW, + DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN +} ; + +enum DRXFftmode_t { + DRX_FFTMODE_2K = 0, + DRX_FFTMODE_4K, + DRX_FFTMODE_8K, + DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN, + DRX_FFTMODE_AUTO = DRX_AUTO +}; + +enum DRXMPEGStrWidth_t { + DRX_MPEG_STR_WIDTH_1, + DRX_MPEG_STR_WIDTH_8 +}; + +enum DRXQamLockRange_t { + DRX_QAM_LOCKRANGE_NORMAL, + DRX_QAM_LOCKRANGE_EXTENDED +}; + +struct DRXKCfgDvbtEchoThres_t { + u16 threshold; + enum DRXFftmode_t fftMode; +} ; + +struct SCfgAgc { + enum AGC_CTRL_MODE ctrlMode; /* off, user, auto */ + u16 outputLevel; /* range dependent on AGC */ + u16 minOutputLevel; /* range dependent on AGC */ + u16 maxOutputLevel; /* range dependent on AGC */ + u16 speed; /* range dependent on AGC */ + u16 top; /* rf-agc take over point */ + u16 cutOffCurrent; /* rf-agc is accelerated if output current + is below cut-off current */ + u16 IngainTgtMax; + u16 FastClipCtrlDelay; +}; + +struct SCfgPreSaw { + u16 reference; /* pre SAW reference value, range 0 .. 31 */ + bool usePreSaw; /* TRUE algorithms must use pre SAW sense */ +}; + +struct DRXKOfdmScCmd_t { + u16 cmd; /**< Command number */ + u16 subcmd; /**< Sub-command parameter*/ + u16 param0; /**< General purpous param */ + u16 param1; /**< General purpous param */ + u16 param2; /**< General purpous param */ + u16 param3; /**< General purpous param */ + u16 param4; /**< General purpous param */ +}; + +struct drxk_state { + struct dvb_frontend c_frontend; + struct dvb_frontend t_frontend; + struct dvb_frontend_parameters param; + struct device *dev; + + struct i2c_adapter *i2c; + u8 demod_address; + void *priv; + + struct mutex mutex; + struct mutex ctlock; + + u32 m_Instance; /**< Channel 1,2,3 or 4 */ + + int m_ChunkSize; + u8 Chunk[256]; + + bool m_hasLNA; + bool m_hasDVBT; + bool m_hasDVBC; + bool m_hasAudio; + bool m_hasATV; + bool m_hasOOB; + bool m_hasSAWSW; /**< TRUE if mat_tx is available */ + bool m_hasGPIO1; /**< TRUE if mat_rx is available */ + bool m_hasGPIO2; /**< TRUE if GPIO is available */ + bool m_hasIRQN; /**< TRUE if IRQN is available */ + u16 m_oscClockFreq; + u16 m_HICfgTimingDiv; + u16 m_HICfgBridgeDelay; + u16 m_HICfgWakeUpKey; + u16 m_HICfgTimeout; + u16 m_HICfgCtrl; + s32 m_sysClockFreq; /**< system clock frequency in kHz */ + + enum EDrxkState m_DrxkState; /**< State of Drxk (init,stopped,started) */ + enum OperationMode m_OperationMode; /**< digital standards */ + struct SCfgAgc m_vsbRfAgcCfg; /**< settings for VSB RF-AGC */ + struct SCfgAgc m_vsbIfAgcCfg; /**< settings for VSB IF-AGC */ + u16 m_vsbPgaCfg; /**< settings for VSB PGA */ + struct SCfgPreSaw m_vsbPreSawCfg; /**< settings for pre SAW sense */ + s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */ + s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */ + bool m_smartAntInverted; + bool m_bDebugEnableBridge; + bool m_bPDownOpenBridge; /**< only open DRXK bridge before power-down once it has been accessed */ + bool m_bPowerDown; /**< Power down when not used */ + + u32 m_IqmFsRateOfs; /**< frequency shift as written to DRXK register (28bit fixpoint) */ + + bool m_enableMPEGOutput; /**< If TRUE, enable MPEG output */ + bool m_insertRSByte; /**< If TRUE, insert RS byte */ + bool m_enableParallel; /**< If TRUE, parallel out otherwise serial */ + bool m_invertDATA; /**< If TRUE, invert DATA signals */ + bool m_invertERR; /**< If TRUE, invert ERR signal */ + bool m_invertSTR; /**< If TRUE, invert STR signals */ + bool m_invertVAL; /**< If TRUE, invert VAL signals */ + bool m_invertCLK; /**< If TRUE, invert CLK signals */ + bool m_DVBCStaticCLK; + bool m_DVBTStaticCLK; /**< If TRUE, static MPEG clockrate will + be used, otherwise clockrate will + adapt to the bitrate of the TS */ + u32 m_DVBTBitrate; + u32 m_DVBCBitrate; + + u8 m_TSDataStrength; + u8 m_TSClockkStrength; + + enum DRXMPEGStrWidth_t m_widthSTR; /**< MPEG start width */ + u32 m_mpegTsStaticBitrate; /**< Maximum bitrate in b/s in case + static clockrate is selected */ + + /* LARGE_INTEGER m_StartTime; */ /**< Contains the time of the last demod start */ + s32 m_MpegLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ + s32 m_DemodLockTimeOut; /**< WaitForLockStatus Timeout (counts from start time) */ + + bool m_disableTEIhandling; + + bool m_RfAgcPol; + bool m_IfAgcPol; + + struct SCfgAgc m_atvRfAgcCfg; /**< settings for ATV RF-AGC */ + struct SCfgAgc m_atvIfAgcCfg; /**< settings for ATV IF-AGC */ + struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */ + bool m_phaseCorrectionBypass; + s16 m_atvTopVidPeak; + u16 m_atvTopNoiseTh; + enum EDrxkSifAttenuation m_sifAttenuation; + bool m_enableCVBSOutput; + bool m_enableSIFOutput; + bool m_bMirrorFreqSpect; + enum EDrxkConstellation m_Constellation; /**< Constellation type of the channel */ + u32 m_CurrSymbolRate; /**< Current QAM symbol rate */ + struct SCfgAgc m_qamRfAgcCfg; /**< settings for QAM RF-AGC */ + struct SCfgAgc m_qamIfAgcCfg; /**< settings for QAM IF-AGC */ + u16 m_qamPgaCfg; /**< settings for QAM PGA */ + struct SCfgPreSaw m_qamPreSawCfg; /**< settings for QAM pre SAW sense */ + enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */ + u16 m_fecRsPlen; + u16 m_fecRsPrescale; + + enum DRXKCfgDvbtSqiSpeed m_sqiSpeed; + + u16 m_GPIO; + u16 m_GPIOCfg; + + struct SCfgAgc m_dvbtRfAgcCfg; /**< settings for QAM RF-AGC */ + struct SCfgAgc m_dvbtIfAgcCfg; /**< settings for QAM IF-AGC */ + struct SCfgPreSaw m_dvbtPreSawCfg; /**< settings for QAM pre SAW sense */ + + u16 m_agcFastClipCtrlDelay; + bool m_adcCompPassed; + u16 m_adcCompCoef[64]; + u16 m_adcState; + + u8 *m_microcode; + int m_microcode_length; + bool m_DRXK_A1_PATCH_CODE; + bool m_DRXK_A1_ROM_CODE; + bool m_DRXK_A2_ROM_CODE; + bool m_DRXK_A3_ROM_CODE; + bool m_DRXK_A2_PATCH_CODE; + bool m_DRXK_A3_PATCH_CODE; + + bool m_rfmirror; + u8 m_deviceSpin; + u32 m_iqmRcRate; + + enum DRXPowerMode m_currentPowerMode; + + /* + * Configurable parameters at the driver. They stores the values found + * at struct drxk_config. + */ + + u16 UIO_mask; /* Bits used by UIO */ + + bool single_master; + bool no_i2c_bridge; + bool antenna_dvbt; + u16 antenna_gpio; + + const char *microcode_name; +}; + +#define NEVER_LOCK 0 +#define NOT_LOCKED 1 +#define DEMOD_LOCK 2 +#define FEC_LOCK 3 +#define MPEG_LOCK 4 + diff --git a/drivers/media/dvb/frontends/drxk_map.h b/drivers/media/dvb/frontends/drxk_map.h new file mode 100644 index 0000000..9b11a83 --- /dev/null +++ b/drivers/media/dvb/frontends/drxk_map.h @@ -0,0 +1,449 @@ +#define AUD_COMM_EXEC__A 0x1000000 +#define AUD_COMM_EXEC_STOP 0x0 +#define FEC_COMM_EXEC__A 0x1C00000 +#define FEC_COMM_EXEC_STOP 0x0 +#define FEC_COMM_EXEC_ACTIVE 0x1 +#define FEC_DI_COMM_EXEC__A 0x1C20000 +#define FEC_DI_COMM_EXEC_STOP 0x0 +#define FEC_DI_INPUT_CTL__A 0x1C20016 +#define FEC_RS_COMM_EXEC__A 0x1C30000 +#define FEC_RS_COMM_EXEC_STOP 0x0 +#define FEC_RS_MEASUREMENT_PERIOD__A 0x1C30012 +#define FEC_RS_MEASUREMENT_PRESCALE__A 0x1C30013 +#define FEC_OC_MODE__A 0x1C40011 +#define FEC_OC_MODE_PARITY__M 0x1 +#define FEC_OC_DTO_MODE__A 0x1C40014 +#define FEC_OC_DTO_MODE_DYNAMIC__M 0x1 +#define FEC_OC_DTO_MODE_OFFSET_ENABLE__M 0x4 +#define FEC_OC_DTO_PERIOD__A 0x1C40015 +#define FEC_OC_DTO_BURST_LEN__A 0x1C40018 +#define FEC_OC_FCT_MODE__A 0x1C4001A +#define FEC_OC_FCT_MODE__PRE 0x0 +#define FEC_OC_FCT_MODE_RAT_ENA__M 0x1 +#define FEC_OC_FCT_MODE_VIRT_ENA__M 0x2 +#define FEC_OC_TMD_MODE__A 0x1C4001E +#define FEC_OC_TMD_COUNT__A 0x1C4001F +#define FEC_OC_TMD_HI_MARGIN__A 0x1C40020 +#define FEC_OC_TMD_LO_MARGIN__A 0x1C40021 +#define FEC_OC_TMD_INT_UPD_RATE__A 0x1C40023 +#define FEC_OC_AVR_PARM_A__A 0x1C40026 +#define FEC_OC_AVR_PARM_B__A 0x1C40027 +#define FEC_OC_RCN_GAIN__A 0x1C4002E +#define FEC_OC_RCN_CTL_RATE_LO__A 0x1C40030 +#define FEC_OC_RCN_CTL_STEP_LO__A 0x1C40032 +#define FEC_OC_RCN_CTL_STEP_HI__A 0x1C40033 +#define FEC_OC_SNC_MODE__A 0x1C40040 +#define FEC_OC_SNC_MODE_SHUTDOWN__M 0x10 +#define FEC_OC_SNC_LWM__A 0x1C40041 +#define FEC_OC_SNC_HWM__A 0x1C40042 +#define FEC_OC_SNC_UNLOCK__A 0x1C40043 +#define FEC_OC_SNC_FAIL_PERIOD__A 0x1C40046 +#define FEC_OC_IPR_MODE__A 0x1C40048 +#define FEC_OC_IPR_MODE_SERIAL__M 0x1 +#define FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M 0x4 +#define FEC_OC_IPR_MODE_MVAL_DIS_PAR__M 0x10 +#define FEC_OC_IPR_INVERT__A 0x1C40049 +#define FEC_OC_IPR_INVERT_MD0__M 0x1 +#define FEC_OC_IPR_INVERT_MD1__M 0x2 +#define FEC_OC_IPR_INVERT_MD2__M 0x4 +#define FEC_OC_IPR_INVERT_MD3__M 0x8 +#define FEC_OC_IPR_INVERT_MD4__M 0x10 +#define FEC_OC_IPR_INVERT_MD5__M 0x20 +#define FEC_OC_IPR_INVERT_MD6__M 0x40 +#define FEC_OC_IPR_INVERT_MD7__M 0x80 +#define FEC_OC_IPR_INVERT_MERR__M 0x100 +#define FEC_OC_IPR_INVERT_MSTRT__M 0x200 +#define FEC_OC_IPR_INVERT_MVAL__M 0x400 +#define FEC_OC_IPR_INVERT_MCLK__M 0x800 +#define FEC_OC_OCR_INVERT__A 0x1C40052 +#define IQM_COMM_EXEC__A 0x1800000 +#define IQM_COMM_EXEC_B_STOP 0x0 +#define IQM_COMM_EXEC_B_ACTIVE 0x1 +#define IQM_FS_RATE_OFS_LO__A 0x1820010 +#define IQM_FS_ADJ_SEL__A 0x1820014 +#define IQM_FS_ADJ_SEL_B_OFF 0x0 +#define IQM_FS_ADJ_SEL_B_QAM 0x1 +#define IQM_FS_ADJ_SEL_B_VSB 0x2 +#define IQM_FD_RATESEL__A 0x1830010 +#define IQM_RC_RATE_OFS_LO__A 0x1840010 +#define IQM_RC_RATE_OFS_LO__W 16 +#define IQM_RC_RATE_OFS_LO__M 0xFFFF +#define IQM_RC_RATE_OFS_HI__M 0xFF +#define IQM_RC_ADJ_SEL__A 0x1840014 +#define IQM_RC_ADJ_SEL_B_OFF 0x0 +#define IQM_RC_ADJ_SEL_B_QAM 0x1 +#define IQM_RC_ADJ_SEL_B_VSB 0x2 +#define IQM_RC_STRETCH__A 0x1840016 +#define IQM_CF_COMM_INT_MSK__A 0x1860006 +#define IQM_CF_SYMMETRIC__A 0x1860010 +#define IQM_CF_MIDTAP__A 0x1860011 +#define IQM_CF_MIDTAP_RE__B 0 +#define IQM_CF_MIDTAP_IM__B 1 +#define IQM_CF_OUT_ENA__A 0x1860012 +#define IQM_CF_OUT_ENA_QAM__B 1 +#define IQM_CF_OUT_ENA_OFDM__M 0x4 +#define IQM_CF_ADJ_SEL__A 0x1860013 +#define IQM_CF_SCALE__A 0x1860014 +#define IQM_CF_SCALE_SH__A 0x1860015 +#define IQM_CF_SCALE_SH__PRE 0x0 +#define IQM_CF_POW_MEAS_LEN__A 0x1860017 +#define IQM_CF_DS_ENA__A 0x1860019 +#define IQM_CF_TAP_RE0__A 0x1860020 +#define IQM_CF_TAP_IM0__A 0x1860040 +#define IQM_CF_CLP_VAL__A 0x1860060 +#define IQM_CF_DATATH__A 0x1860061 +#define IQM_CF_PKDTH__A 0x1860062 +#define IQM_CF_WND_LEN__A 0x1860063 +#define IQM_CF_DET_LCT__A 0x1860064 +#define IQM_CF_BYPASSDET__A 0x1860067 +#define IQM_AF_COMM_EXEC__A 0x1870000 +#define IQM_AF_COMM_EXEC_ACTIVE 0x1 +#define IQM_AF_CLKNEG__A 0x1870012 +#define IQM_AF_CLKNEG_CLKNEGDATA__M 0x2 +#define IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS 0x0 +#define IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG 0x2 +#define IQM_AF_START_LOCK__A 0x187001B +#define IQM_AF_PHASE0__A 0x187001C +#define IQM_AF_PHASE1__A 0x187001D +#define IQM_AF_PHASE2__A 0x187001E +#define IQM_AF_CLP_LEN__A 0x1870023 +#define IQM_AF_CLP_TH__A 0x1870024 +#define IQM_AF_SNS_LEN__A 0x1870026 +#define IQM_AF_AGC_IF__A 0x1870028 +#define IQM_AF_AGC_RF__A 0x1870029 +#define IQM_AF_PDREF__A 0x187002B +#define IQM_AF_PDREF__M 0x1F +#define IQM_AF_STDBY__A 0x187002C +#define IQM_AF_STDBY_STDBY_ADC_STANDBY 0x2 +#define IQM_AF_STDBY_STDBY_AMP_STANDBY 0x4 +#define IQM_AF_STDBY_STDBY_PD_STANDBY 0x8 +#define IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY 0x10 +#define IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY 0x20 +#define IQM_AF_AMUX__A 0x187002D +#define IQM_AF_AMUX_SIGNAL2ADC 0x1 +#define IQM_AF_UPD_SEL__A 0x187002F +#define IQM_AF_INC_LCT__A 0x1870034 +#define IQM_AF_INC_BYPASS__A 0x1870036 +#define OFDM_CP_COMM_EXEC__A 0x2800000 +#define OFDM_CP_COMM_EXEC_STOP 0x0 +#define OFDM_EC_SB_PRIOR__A 0x3410013 +#define OFDM_EC_SB_PRIOR_HI 0x0 +#define OFDM_EC_SB_PRIOR_LO 0x1 +#define OFDM_EQ_TOP_TD_TPS_CONST__A 0x3010054 +#define OFDM_EQ_TOP_TD_TPS_CONST__M 0x3 +#define OFDM_EQ_TOP_TD_TPS_CONST_64QAM 0x2 +#define OFDM_EQ_TOP_TD_TPS_CODE_HP__A 0x3010056 +#define OFDM_EQ_TOP_TD_TPS_CODE_HP__M 0x7 +#define OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8 0x4 +#define OFDM_EQ_TOP_TD_SQR_ERR_I__A 0x301005E +#define OFDM_EQ_TOP_TD_SQR_ERR_Q__A 0x301005F +#define OFDM_EQ_TOP_TD_SQR_ERR_EXP__A 0x3010060 +#define OFDM_EQ_TOP_TD_REQ_SMB_CNT__A 0x3010061 +#define OFDM_EQ_TOP_TD_TPS_PWR_OFS__A 0x3010062 +#define OFDM_LC_COMM_EXEC__A 0x3800000 +#define OFDM_LC_COMM_EXEC_STOP 0x0 +#define OFDM_SC_COMM_EXEC__A 0x3C00000 +#define OFDM_SC_COMM_EXEC_STOP 0x0 +#define OFDM_SC_COMM_STATE__A 0x3C00001 +#define OFDM_SC_RA_RAM_PARAM0__A 0x3C20040 +#define OFDM_SC_RA_RAM_PARAM1__A 0x3C20041 +#define OFDM_SC_RA_RAM_CMD_ADDR__A 0x3C20042 +#define OFDM_SC_RA_RAM_CMD__A 0x3C20043 +#define OFDM_SC_RA_RAM_CMD_NULL 0x0 +#define OFDM_SC_RA_RAM_CMD_PROC_START 0x1 +#define OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM 0x3 +#define OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM 0x4 +#define OFDM_SC_RA_RAM_CMD_GET_OP_PARAM 0x5 +#define OFDM_SC_RA_RAM_CMD_USER_IO 0x6 +#define OFDM_SC_RA_RAM_CMD_SET_TIMER 0x7 +#define OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING 0x8 +#define OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M 0x1 +#define OFDM_SC_RA_RAM_LOCKTRACK_MIN 0x1 +#define OFDM_SC_RA_RAM_OP_PARAM__A 0x3C20048 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE__M 0x3 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE_2K 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_MODE_8K 0x1 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_32 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_16 0x4 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_8 0x8 +#define OFDM_SC_RA_RAM_OP_PARAM_GUARD_4 0xC +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16 0x10 +#define OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64 0x20 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_NO 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A1 0x40 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A2 0x80 +#define OFDM_SC_RA_RAM_OP_PARAM_HIER_A4 0xC0 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3 0x200 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4 0x400 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6 0x600 +#define OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8 0x800 +#define OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI 0x0 +#define OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO 0x1000 +#define OFDM_SC_RA_RAM_OP_AUTO_MODE__M 0x1 +#define OFDM_SC_RA_RAM_OP_AUTO_GUARD__M 0x2 +#define OFDM_SC_RA_RAM_OP_AUTO_CONST__M 0x4 +#define OFDM_SC_RA_RAM_OP_AUTO_HIER__M 0x8 +#define OFDM_SC_RA_RAM_OP_AUTO_RATE__M 0x10 +#define OFDM_SC_RA_RAM_LOCK__A 0x3C2004B +#define OFDM_SC_RA_RAM_LOCK_DEMOD__M 0x1 +#define OFDM_SC_RA_RAM_LOCK_FEC__M 0x2 +#define OFDM_SC_RA_RAM_LOCK_MPEG__M 0x4 +#define OFDM_SC_RA_RAM_LOCK_NODVBT__M 0x8 +#define OFDM_SC_RA_RAM_BE_OPT_DELAY__A 0x3C2004D +#define OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A 0x3C2004E +#define OFDM_SC_RA_RAM_ECHO_THRES__A 0x3C2004F +#define OFDM_SC_RA_RAM_ECHO_THRES_8K__B 0 +#define OFDM_SC_RA_RAM_ECHO_THRES_8K__M 0xFF +#define OFDM_SC_RA_RAM_ECHO_THRES_2K__B 8 +#define OFDM_SC_RA_RAM_ECHO_THRES_2K__M 0xFF00 +#define OFDM_SC_RA_RAM_CONFIG__A 0x3C20050 +#define OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M 0x800 +#define OFDM_SC_RA_RAM_FR_THRES_8K__A 0x3C2007D +#define OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A 0x3C200E0 +#define OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A 0x3C200E1 +#define OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A 0x3C200E3 +#define OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A 0x3C200E4 +#define OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A 0x3C200F8 +#define QAM_COMM_EXEC__A 0x1400000 +#define QAM_COMM_EXEC_STOP 0x0 +#define QAM_COMM_EXEC_ACTIVE 0x1 +#define QAM_TOP_ANNEX_A 0x0 +#define QAM_TOP_ANNEX_C 0x2 +#define QAM_SL_ERR_POWER__A 0x1430017 +#define QAM_DQ_QUAL_FUN0__A 0x1440018 +#define QAM_DQ_QUAL_FUN1__A 0x1440019 +#define QAM_DQ_QUAL_FUN2__A 0x144001A +#define QAM_DQ_QUAL_FUN3__A 0x144001B +#define QAM_DQ_QUAL_FUN4__A 0x144001C +#define QAM_DQ_QUAL_FUN5__A 0x144001D +#define QAM_LC_MODE__A 0x1450010 +#define QAM_LC_QUAL_TAB0__A 0x1450018 +#define QAM_LC_QUAL_TAB1__A 0x1450019 +#define QAM_LC_QUAL_TAB2__A 0x145001A +#define QAM_LC_QUAL_TAB3__A 0x145001B +#define QAM_LC_QUAL_TAB4__A 0x145001C +#define QAM_LC_QUAL_TAB5__A 0x145001D +#define QAM_LC_QUAL_TAB6__A 0x145001E +#define QAM_LC_QUAL_TAB8__A 0x145001F +#define QAM_LC_QUAL_TAB9__A 0x1450020 +#define QAM_LC_QUAL_TAB10__A 0x1450021 +#define QAM_LC_QUAL_TAB12__A 0x1450022 +#define QAM_LC_QUAL_TAB15__A 0x1450023 +#define QAM_LC_QUAL_TAB16__A 0x1450024 +#define QAM_LC_QUAL_TAB20__A 0x1450025 +#define QAM_LC_QUAL_TAB25__A 0x1450026 +#define QAM_LC_LPF_FACTORP__A 0x1450028 +#define QAM_LC_LPF_FACTORI__A 0x1450029 +#define QAM_LC_RATE_LIMIT__A 0x145002A +#define QAM_LC_SYMBOL_FREQ__A 0x145002B +#define QAM_SY_TIMEOUT__A 0x1470011 +#define QAM_SY_TIMEOUT__PRE 0x3A98 +#define QAM_SY_SYNC_LWM__A 0x1470012 +#define QAM_SY_SYNC_AWM__A 0x1470013 +#define QAM_SY_SYNC_HWM__A 0x1470014 +#define QAM_SY_SP_INV__A 0x1470017 +#define QAM_SY_SP_INV_SPECTRUM_INV_DIS 0x0 +#define SCU_COMM_EXEC__A 0x800000 +#define SCU_COMM_EXEC_STOP 0x0 +#define SCU_COMM_EXEC_ACTIVE 0x1 +#define SCU_COMM_EXEC_HOLD 0x2 +#define SCU_RAM_DRIVER_DEBUG__A 0x831EBF +#define SCU_RAM_QAM_FSM_STEP_PERIOD__A 0x831EC4 +#define SCU_RAM_GPIO__A 0x831EC7 +#define SCU_RAM_GPIO_HW_LOCK_IND_DISABLE 0x0 +#define SCU_RAM_AGC_CLP_CTRL_MODE__A 0x831EC8 +#define SCU_RAM_FEC_ACCUM_PKT_FAILURES__A 0x831ECB +#define SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A 0x831F05 +#define SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A 0x831F15 +#define SCU_RAM_AGC_KI_CYCLEN__A 0x831F17 +#define SCU_RAM_AGC_SNS_CYCLEN__A 0x831F18 +#define SCU_RAM_AGC_RF_SNS_DEV_MAX__A 0x831F19 +#define SCU_RAM_AGC_RF_SNS_DEV_MIN__A 0x831F1A +#define SCU_RAM_AGC_RF_MAX__A 0x831F1B +#define SCU_RAM_AGC_CONFIG__A 0x831F24 +#define SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M 0x1 +#define SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M 0x2 +#define SCU_RAM_AGC_CONFIG_INV_IF_POL__M 0x100 +#define SCU_RAM_AGC_CONFIG_INV_RF_POL__M 0x200 +#define SCU_RAM_AGC_KI__A 0x831F25 +#define SCU_RAM_AGC_KI_RF__B 4 +#define SCU_RAM_AGC_KI_RF__M 0xF0 +#define SCU_RAM_AGC_KI_IF__B 8 +#define SCU_RAM_AGC_KI_IF__M 0xF00 +#define SCU_RAM_AGC_KI_RED__A 0x831F26 +#define SCU_RAM_AGC_KI_RED_RAGC_RED__B 2 +#define SCU_RAM_AGC_KI_RED_RAGC_RED__M 0xC +#define SCU_RAM_AGC_KI_RED_IAGC_RED__B 4 +#define SCU_RAM_AGC_KI_RED_IAGC_RED__M 0x30 +#define SCU_RAM_AGC_KI_INNERGAIN_MIN__A 0x831F27 +#define SCU_RAM_AGC_KI_MINGAIN__A 0x831F28 +#define SCU_RAM_AGC_KI_MAXGAIN__A 0x831F29 +#define SCU_RAM_AGC_KI_MAXMINGAIN_TH__A 0x831F2A +#define SCU_RAM_AGC_KI_MIN__A 0x831F2B +#define SCU_RAM_AGC_KI_MAX__A 0x831F2C +#define SCU_RAM_AGC_CLP_SUM__A 0x831F2D +#define SCU_RAM_AGC_CLP_SUM_MIN__A 0x831F2E +#define SCU_RAM_AGC_CLP_SUM_MAX__A 0x831F2F +#define SCU_RAM_AGC_CLP_CYCLEN__A 0x831F30 +#define SCU_RAM_AGC_CLP_CYCCNT__A 0x831F31 +#define SCU_RAM_AGC_CLP_DIR_TO__A 0x831F32 +#define SCU_RAM_AGC_CLP_DIR_WD__A 0x831F33 +#define SCU_RAM_AGC_CLP_DIR_STP__A 0x831F34 +#define SCU_RAM_AGC_SNS_SUM__A 0x831F35 +#define SCU_RAM_AGC_SNS_SUM_MIN__A 0x831F36 +#define SCU_RAM_AGC_SNS_SUM_MAX__A 0x831F37 +#define SCU_RAM_AGC_SNS_CYCCNT__A 0x831F38 +#define SCU_RAM_AGC_SNS_DIR_TO__A 0x831F39 +#define SCU_RAM_AGC_SNS_DIR_WD__A 0x831F3A +#define SCU_RAM_AGC_SNS_DIR_STP__A 0x831F3B +#define SCU_RAM_AGC_INGAIN_TGT__A 0x831F3D +#define SCU_RAM_AGC_INGAIN_TGT_MIN__A 0x831F3E +#define SCU_RAM_AGC_INGAIN_TGT_MAX__A 0x831F3F +#define SCU_RAM_AGC_IF_IACCU_HI__A 0x831F40 +#define SCU_RAM_AGC_IF_IACCU_LO__A 0x831F41 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT__A 0x831F42 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A 0x831F43 +#define SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A 0x831F44 +#define SCU_RAM_AGC_RF_IACCU_HI__A 0x831F45 +#define SCU_RAM_AGC_RF_IACCU_LO__A 0x831F46 +#define SCU_RAM_AGC_RF_IACCU_HI_CO__A 0x831F47 +#define SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A 0x831F84 +#define SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A 0x831F85 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A 0x831F86 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A 0x831F87 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A 0x831F88 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A 0x831F89 +#define SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A 0x831F8A +#define SCU_RAM_QAM_FSM_RTH__A 0x831F8E +#define SCU_RAM_QAM_FSM_FTH__A 0x831F8F +#define SCU_RAM_QAM_FSM_PTH__A 0x831F90 +#define SCU_RAM_QAM_FSM_MTH__A 0x831F91 +#define SCU_RAM_QAM_FSM_CTH__A 0x831F92 +#define SCU_RAM_QAM_FSM_QTH__A 0x831F93 +#define SCU_RAM_QAM_FSM_RATE_LIM__A 0x831F94 +#define SCU_RAM_QAM_FSM_FREQ_LIM__A 0x831F95 +#define SCU_RAM_QAM_FSM_COUNT_LIM__A 0x831F96 +#define SCU_RAM_QAM_LC_CA_COARSE__A 0x831F97 +#define SCU_RAM_QAM_LC_CA_FINE__A 0x831F99 +#define SCU_RAM_QAM_LC_CP_COARSE__A 0x831F9A +#define SCU_RAM_QAM_LC_CP_MEDIUM__A 0x831F9B +#define SCU_RAM_QAM_LC_CP_FINE__A 0x831F9C +#define SCU_RAM_QAM_LC_CI_COARSE__A 0x831F9D +#define SCU_RAM_QAM_LC_CI_MEDIUM__A 0x831F9E +#define SCU_RAM_QAM_LC_CI_FINE__A 0x831F9F +#define SCU_RAM_QAM_LC_EP_COARSE__A 0x831FA0 +#define SCU_RAM_QAM_LC_EP_MEDIUM__A 0x831FA1 +#define SCU_RAM_QAM_LC_EP_FINE__A 0x831FA2 +#define SCU_RAM_QAM_LC_EI_COARSE__A 0x831FA3 +#define SCU_RAM_QAM_LC_EI_MEDIUM__A 0x831FA4 +#define SCU_RAM_QAM_LC_EI_FINE__A 0x831FA5 +#define SCU_RAM_QAM_LC_CF_COARSE__A 0x831FA6 +#define SCU_RAM_QAM_LC_CF_MEDIUM__A 0x831FA7 +#define SCU_RAM_QAM_LC_CF_FINE__A 0x831FA8 +#define SCU_RAM_QAM_LC_CF1_COARSE__A 0x831FA9 +#define SCU_RAM_QAM_LC_CF1_MEDIUM__A 0x831FAA +#define SCU_RAM_QAM_LC_CF1_FINE__A 0x831FAB +#define SCU_RAM_QAM_SL_SIG_POWER__A 0x831FAC +#define SCU_RAM_QAM_EQ_CMA_RAD0__A 0x831FAD +#define SCU_RAM_QAM_EQ_CMA_RAD1__A 0x831FAE +#define SCU_RAM_QAM_EQ_CMA_RAD2__A 0x831FAF +#define SCU_RAM_QAM_EQ_CMA_RAD3__A 0x831FB0 +#define SCU_RAM_QAM_EQ_CMA_RAD4__A 0x831FB1 +#define SCU_RAM_QAM_EQ_CMA_RAD5__A 0x831FB2 +#define SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED 0x4000 +#define SCU_RAM_QAM_LOCKED_LOCKED_LOCKED 0x8000 +#define SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK 0xC000 +#define SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A 0x831FEA +#define SCU_RAM_DRIVER_VER_HI__A 0x831FEB +#define SCU_RAM_DRIVER_VER_LO__A 0x831FEC +#define SCU_RAM_PARAM_15__A 0x831FED +#define SCU_RAM_PARAM_0__A 0x831FFC +#define SCU_RAM_COMMAND__A 0x831FFD +#define SCU_RAM_COMMAND_CMD_DEMOD_RESET 0x1 +#define SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV 0x2 +#define SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM 0x3 +#define SCU_RAM_COMMAND_CMD_DEMOD_START 0x4 +#define SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK 0x5 +#define SCU_RAM_COMMAND_CMD_DEMOD_STOP 0x9 +#define SCU_RAM_COMMAND_STANDARD_QAM 0x200 +#define SCU_RAM_COMMAND_STANDARD_OFDM 0x400 +#define SIO_TOP_COMM_KEY__A 0x41000F +#define SIO_TOP_COMM_KEY_KEY 0xFABA +#define SIO_TOP_JTAGID_LO__A 0x410012 +#define SIO_HI_RA_RAM_RES__A 0x420031 +#define SIO_HI_RA_RAM_CMD__A 0x420032 +#define SIO_HI_RA_RAM_CMD_RESET 0x2 +#define SIO_HI_RA_RAM_CMD_CONFIG 0x3 +#define SIO_HI_RA_RAM_CMD_BRDCTRL 0x7 +#define SIO_HI_RA_RAM_PAR_1__A 0x420033 +#define SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY 0x3945 +#define SIO_HI_RA_RAM_PAR_2__A 0x420034 +#define SIO_HI_RA_RAM_PAR_2_CFG_DIV__M 0x7F +#define SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN 0x0 +#define SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED 0x4 +#define SIO_HI_RA_RAM_PAR_3__A 0x420035 +#define SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M 0x7F +#define SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B 7 +#define SIO_HI_RA_RAM_PAR_3_ACP_RW_READ 0x0 +#define SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE 0x8 +#define SIO_HI_RA_RAM_PAR_4__A 0x420036 +#define SIO_HI_RA_RAM_PAR_5__A 0x420037 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE 0x1 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M 0x8 +#define SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ 0x8 +#define SIO_HI_RA_RAM_PAR_6__A 0x420038 +#define SIO_CC_PLL_LOCK__A 0x450012 +#define SIO_CC_PWD_MODE__A 0x450015 +#define SIO_CC_PWD_MODE_LEVEL_NONE 0x0 +#define SIO_CC_PWD_MODE_LEVEL_OFDM 0x1 +#define SIO_CC_PWD_MODE_LEVEL_CLOCK 0x2 +#define SIO_CC_PWD_MODE_LEVEL_PLL 0x3 +#define SIO_CC_PWD_MODE_LEVEL_OSC 0x4 +#define SIO_CC_SOFT_RST__A 0x450016 +#define SIO_CC_SOFT_RST_OFDM__M 0x1 +#define SIO_CC_SOFT_RST_SYS__M 0x2 +#define SIO_CC_SOFT_RST_OSC__M 0x4 +#define SIO_CC_UPDATE__A 0x450017 +#define SIO_CC_UPDATE_KEY 0xFABA +#define SIO_OFDM_SH_OFDM_RING_ENABLE__A 0x470010 +#define SIO_OFDM_SH_OFDM_RING_ENABLE_OFF 0x0 +#define SIO_OFDM_SH_OFDM_RING_ENABLE_ON 0x1 +#define SIO_OFDM_SH_OFDM_RING_STATUS__A 0x470012 +#define SIO_OFDM_SH_OFDM_RING_STATUS_DOWN 0x0 +#define SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED 0x1 +#define SIO_BL_COMM_EXEC__A 0x480000 +#define SIO_BL_COMM_EXEC_ACTIVE 0x1 +#define SIO_BL_STATUS__A 0x480010 +#define SIO_BL_MODE__A 0x480011 +#define SIO_BL_MODE_DIRECT 0x0 +#define SIO_BL_MODE_CHAIN 0x1 +#define SIO_BL_ENABLE__A 0x480012 +#define SIO_BL_ENABLE_ON 0x1 +#define SIO_BL_TGT_HDR__A 0x480014 +#define SIO_BL_TGT_ADDR__A 0x480015 +#define SIO_BL_SRC_ADDR__A 0x480016 +#define SIO_BL_SRC_LEN__A 0x480017 +#define SIO_BL_CHAIN_ADDR__A 0x480018 +#define SIO_BL_CHAIN_LEN__A 0x480019 +#define SIO_PDR_MON_CFG__A 0x7F0010 +#define SIO_PDR_UIO_IN_HI__A 0x7F0015 +#define SIO_PDR_UIO_OUT_LO__A 0x7F0016 +#define SIO_PDR_OHW_CFG__A 0x7F001F +#define SIO_PDR_OHW_CFG_FREF_SEL__M 0x3 +#define SIO_PDR_MSTRT_CFG__A 0x7F0025 +#define SIO_PDR_MERR_CFG__A 0x7F0026 +#define SIO_PDR_MCLK_CFG__A 0x7F0028 +#define SIO_PDR_MCLK_CFG_DRIVE__B 3 +#define SIO_PDR_MVAL_CFG__A 0x7F0029 +#define SIO_PDR_MD0_CFG__A 0x7F002A +#define SIO_PDR_MD0_CFG_DRIVE__B 3 +#define SIO_PDR_MD1_CFG__A 0x7F002B +#define SIO_PDR_MD2_CFG__A 0x7F002C +#define SIO_PDR_MD3_CFG__A 0x7F002D +#define SIO_PDR_MD4_CFG__A 0x7F002F +#define SIO_PDR_MD5_CFG__A 0x7F0030 +#define SIO_PDR_MD6_CFG__A 0x7F0031 +#define SIO_PDR_MD7_CFG__A 0x7F0032 +#define SIO_PDR_SMA_TX_CFG__A 0x7F0038 diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c index f7a40a1..aa9ccb8 100644 --- a/drivers/media/dvb/frontends/itd1000.c +++ b/drivers/media/dvb/frontends/itd1000.c @@ -35,21 +35,18 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); -#define deb(args...) do { \ +#define itd_dbg(args...) do { \ if (debug) { \ printk(KERN_DEBUG "ITD1000: " args);\ - printk("\n"); \ } \ } while (0) -#define warn(args...) do { \ +#define itd_warn(args...) do { \ printk(KERN_WARNING "ITD1000: " args); \ - printk("\n"); \ } while (0) -#define info(args...) do { \ +#define itd_info(args...) do { \ printk(KERN_INFO "ITD1000: " args); \ - printk("\n"); \ } while (0) /* don't write more than one byte with flexcop behind */ @@ -62,7 +59,7 @@ static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 le buf[0] = reg; memcpy(&buf[1], v, len); - /* deb("wr %02x: %02x", reg, v[0]); */ + /* itd_dbg("wr %02x: %02x\n", reg, v[0]); */ if (i2c_transfer(state->i2c, &msg, 1) != 1) { printk(KERN_WARNING "itd1000 I2C write failed\n"); @@ -83,7 +80,7 @@ static int itd1000_read_reg(struct itd1000_state *state, u8 reg) itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1); if (i2c_transfer(state->i2c, msg, 2) != 2) { - warn("itd1000 I2C read failed"); + itd_warn("itd1000 I2C read failed\n"); return -EREMOTEIO; } return val; @@ -127,14 +124,14 @@ static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate) u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0; u8 bw = itd1000_read_reg(state, BW) & 0xf0; - deb("symbol_rate = %d", symbol_rate); + itd_dbg("symbol_rate = %d\n", symbol_rate); /* not sure what is that ? - starting to download the table */ itd1000_write_reg(state, CON1, con1 | (1 << 1)); for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++) if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) { - deb("symrate: index: %d pgaext: %x, bbgvmin: %x", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin); + itd_dbg("symrate: index: %d pgaext: %x, bbgvmin: %x\n", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin); itd1000_write_reg(state, PLLFH, pllfh | (itd1000_lpf_pga[i].pgaext << 4)); itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin)); itd1000_write_reg(state, BW, bw | (i & 0x0f)); @@ -182,7 +179,7 @@ static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz) adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f; - deb("VCO: %dkHz: %d -> ADCOUT: %d %02x", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c); + itd_dbg("VCO: %dkHz: %d -> ADCOUT: %d %02x\n", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c); if (adcout > 13) { if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15)) @@ -232,7 +229,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz) pllf = (u32) tmp; state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF; - deb("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d", freq_khz, state->frequency, pllf, plln); + itd_dbg("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d\n", freq_khz, state->frequency, pllf, plln); itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */; itd1000_write_reg(state, PLLNL, plln & 0xff); @@ -242,7 +239,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz) for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) { if (freq_khz <= itd1000_fre_values[i].freq) { - deb("fre_values: %d", i); + itd_dbg("fre_values: %d\n", i); itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]); for (j = 0; j < 9; j++) itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]); @@ -382,7 +379,7 @@ struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter kfree(state); return NULL; } - info("successfully identified (ID: %d)", i); + itd_info("successfully identified (ID: %d)\n", i); memset(state->shadow, 0xff, sizeof(state->shadow)); for (i = 0x65; i < 0x9c; i++) diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c index a763ec75..6599b8f 100644 --- a/drivers/media/dvb/frontends/nxt6000.c +++ b/drivers/media/dvb/frontends/nxt6000.c @@ -50,7 +50,7 @@ static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data) if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret); - return (ret != 1) ? -EFAULT : 0; + return (ret != 1) ? -EIO : 0; } static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg) diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index 17f8cdf..3879d2e 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -634,7 +634,7 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe, struct s5h1420_state* state = fe->demodulator_priv; int frequency_delta; struct dvb_frontend_tune_settings fesettings; - uint8_t clock_settting; + uint8_t clock_setting; dprintk("enter %s\n", __func__); @@ -684,19 +684,19 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe, switch (state->fclk) { default: case 88000000: - clock_settting = 80; + clock_setting = 80; break; case 86000000: - clock_settting = 78; + clock_setting = 78; break; case 80000000: - clock_settting = 72; + clock_setting = 72; break; case 59000000: - clock_settting = 51; + clock_setting = 51; break; case 44000000: - clock_settting = 36; + clock_setting = 36; break; } dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c new file mode 100644 index 0000000..0384e8d --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271c2dd.c @@ -0,0 +1,1251 @@ +/* + * tda18271c2dd: Driver for the TDA18271C2 tuner + * + * Copyright (C) 2010 Digital Devices GmbH + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 only, as published by the Free Software Foundation. + * + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA + * Or, point your browser to http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <asm/div64.h> + +#include "dvb_frontend.h" + +struct SStandardParam { + s32 m_IFFrequency; + u32 m_BandWidth; + u8 m_EP3_4_0; + u8 m_EB22; +}; + +struct SMap { + u32 m_Frequency; + u8 m_Param; +}; + +struct SMapI { + u32 m_Frequency; + s32 m_Param; +}; + +struct SMap2 { + u32 m_Frequency; + u8 m_Param1; + u8 m_Param2; +}; + +struct SRFBandMap { + u32 m_RF_max; + u32 m_RF1_Default; + u32 m_RF2_Default; + u32 m_RF3_Default; +}; + +enum ERegister { + ID = 0, + TM, + PL, + EP1, EP2, EP3, EP4, EP5, + CPD, CD1, CD2, CD3, + MPD, MD1, MD2, MD3, + EB1, EB2, EB3, EB4, EB5, EB6, EB7, EB8, EB9, EB10, + EB11, EB12, EB13, EB14, EB15, EB16, EB17, EB18, EB19, EB20, + EB21, EB22, EB23, + NUM_REGS +}; + +struct tda_state { + struct i2c_adapter *i2c; + u8 adr; + + u32 m_Frequency; + u32 IF; + + u8 m_IFLevelAnalog; + u8 m_IFLevelDigital; + u8 m_IFLevelDVBC; + u8 m_IFLevelDVBT; + + u8 m_EP4; + u8 m_EP3_Standby; + + bool m_bMaster; + + s32 m_SettlingTime; + + u8 m_Regs[NUM_REGS]; + + /* Tracking filter settings for band 0..6 */ + u32 m_RF1[7]; + s32 m_RF_A1[7]; + s32 m_RF_B1[7]; + u32 m_RF2[7]; + s32 m_RF_A2[7]; + s32 m_RF_B2[7]; + u32 m_RF3[7]; + + u8 m_TMValue_RFCal; /* Calibration temperatur */ + + bool m_bFMInput; /* true to use Pin 8 for FM Radio */ + +}; + +static int PowerScan(struct tda_state *state, + u8 RFBand, u32 RF_in, + u32 *pRF_Out, bool *pbcal); + +static int i2c_readn(struct i2c_adapter *adapter, u8 adr, u8 *data, int len) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = data, .len = len} }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len) +{ + struct i2c_msg msg = {.addr = adr, .flags = 0, + .buf = data, .len = len}; + + if (i2c_transfer(adap, &msg, 1) != 1) { + printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr); + return -1; + } + return 0; +} + +static int WriteRegs(struct tda_state *state, + u8 SubAddr, u8 *Regs, u16 nRegs) +{ + u8 data[nRegs+1]; + + data[0] = SubAddr; + memcpy(data + 1, Regs, nRegs); + return i2c_write(state->i2c, state->adr, data, nRegs+1); +} + +static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg) +{ + u8 msg[2] = {SubAddr, Reg}; + + return i2c_write(state->i2c, state->adr, msg, 2); +} + +static int Read(struct tda_state *state, u8 * Regs) +{ + return i2c_readn(state->i2c, state->adr, Regs, 16); +} + +static int ReadExtented(struct tda_state *state, u8 * Regs) +{ + return i2c_readn(state->i2c, state->adr, Regs, NUM_REGS); +} + +static int UpdateRegs(struct tda_state *state, u8 RegFrom, u8 RegTo) +{ + return WriteRegs(state, RegFrom, + &state->m_Regs[RegFrom], RegTo-RegFrom+1); +} +static int UpdateReg(struct tda_state *state, u8 Reg) +{ + return WriteReg(state, Reg, state->m_Regs[Reg]); +} + +#include "tda18271c2dd_maps.h" + +static void reset(struct tda_state *state) +{ + u32 ulIFLevelAnalog = 0; + u32 ulIFLevelDigital = 2; + u32 ulIFLevelDVBC = 7; + u32 ulIFLevelDVBT = 6; + u32 ulXTOut = 0; + u32 ulStandbyMode = 0x06; /* Send in stdb, but leave osc on */ + u32 ulSlave = 0; + u32 ulFMInput = 0; + u32 ulSettlingTime = 100; + + state->m_Frequency = 0; + state->m_SettlingTime = 100; + state->m_IFLevelAnalog = (ulIFLevelAnalog & 0x07) << 2; + state->m_IFLevelDigital = (ulIFLevelDigital & 0x07) << 2; + state->m_IFLevelDVBC = (ulIFLevelDVBC & 0x07) << 2; + state->m_IFLevelDVBT = (ulIFLevelDVBT & 0x07) << 2; + + state->m_EP4 = 0x20; + if (ulXTOut != 0) + state->m_EP4 |= 0x40; + + state->m_EP3_Standby = ((ulStandbyMode & 0x07) << 5) | 0x0F; + state->m_bMaster = (ulSlave == 0); + + state->m_SettlingTime = ulSettlingTime; + + state->m_bFMInput = (ulFMInput == 2); +} + +static bool SearchMap1(struct SMap Map[], + u32 Frequency, u8 *pParam) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam = Map[i].m_Param; + return true; +} + +static bool SearchMap2(struct SMapI Map[], + u32 Frequency, s32 *pParam) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && + (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam = Map[i].m_Param; + return true; +} + +static bool SearchMap3(struct SMap2 Map[], u32 Frequency, + u8 *pParam1, u8 *pParam2) +{ + int i = 0; + + while ((Map[i].m_Frequency != 0) && + (Frequency > Map[i].m_Frequency)) + i += 1; + if (Map[i].m_Frequency == 0) + return false; + *pParam1 = Map[i].m_Param1; + *pParam2 = Map[i].m_Param2; + return true; +} + +static bool SearchMap4(struct SRFBandMap Map[], + u32 Frequency, u8 *pRFBand) +{ + int i = 0; + + while (i < 7 && (Frequency > Map[i].m_RF_max)) + i += 1; + if (i == 7) + return false; + *pRFBand = i; + return true; +} + +static int ThermometerRead(struct tda_state *state, u8 *pTM_Value) +{ + int status = 0; + + do { + u8 Regs[16]; + state->m_Regs[TM] |= 0x10; + status = UpdateReg(state, TM); + if (status < 0) + break; + status = Read(state, Regs); + if (status < 0) + break; + if (((Regs[TM] & 0x0F) == 0 && (Regs[TM] & 0x20) == 0x20) || + ((Regs[TM] & 0x0F) == 8 && (Regs[TM] & 0x20) == 0x00)) { + state->m_Regs[TM] ^= 0x20; + status = UpdateReg(state, TM); + if (status < 0) + break; + msleep(10); + status = Read(state, Regs); + if (status < 0) + break; + } + *pTM_Value = (Regs[TM] & 0x20) + ? m_Thermometer_Map_2[Regs[TM] & 0x0F] + : m_Thermometer_Map_1[Regs[TM] & 0x0F] ; + state->m_Regs[TM] &= ~0x10; /* Thermometer off */ + status = UpdateReg(state, TM); + if (status < 0) + break; + state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 ????????? */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + } while (0); + + return status; +} + +static int StandBy(struct tda_state *state) +{ + int status = 0; + do { + state->m_Regs[EB12] &= ~0x20; /* PD_AGC1_Det = 0 */ + status = UpdateReg(state, EB12); + if (status < 0) + break; + state->m_Regs[EB18] &= ~0x83; /* AGC1_loop_off = 0, AGC1_Gain = 6 dB */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + state->m_Regs[EB21] |= 0x03; /* AGC2_Gain = -6 dB */ + state->m_Regs[EP3] = state->m_EP3_Standby; + status = UpdateReg(state, EP3); + if (status < 0) + break; + state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LP_Fc[2] = 0 */ + status = UpdateRegs(state, EB21, EB23); + if (status < 0) + break; + } while (0); + return status; +} + +static int CalcMainPLL(struct tda_state *state, u32 freq) +{ + + u8 PostDiv; + u8 Div; + u64 OscFreq; + u32 MainDiv; + + if (!SearchMap3(m_Main_PLL_Map, freq, &PostDiv, &Div)) + return -EINVAL; + + OscFreq = (u64) freq * (u64) Div; + OscFreq *= (u64) 16384; + do_div(OscFreq, (u64)16000000); + MainDiv = OscFreq; + + state->m_Regs[MPD] = PostDiv & 0x77; + state->m_Regs[MD1] = ((MainDiv >> 16) & 0x7F); + state->m_Regs[MD2] = ((MainDiv >> 8) & 0xFF); + state->m_Regs[MD3] = (MainDiv & 0xFF); + + return UpdateRegs(state, MPD, MD3); +} + +static int CalcCalPLL(struct tda_state *state, u32 freq) +{ + u8 PostDiv; + u8 Div; + u64 OscFreq; + u32 CalDiv; + + if (!SearchMap3(m_Cal_PLL_Map, freq, &PostDiv, &Div)) + return -EINVAL; + + OscFreq = (u64)freq * (u64)Div; + /* CalDiv = u32( OscFreq * 16384 / 16000000 ); */ + OscFreq *= (u64)16384; + do_div(OscFreq, (u64)16000000); + CalDiv = OscFreq; + + state->m_Regs[CPD] = PostDiv; + state->m_Regs[CD1] = ((CalDiv >> 16) & 0xFF); + state->m_Regs[CD2] = ((CalDiv >> 8) & 0xFF); + state->m_Regs[CD3] = (CalDiv & 0xFF); + + return UpdateRegs(state, CPD, CD3); +} + +static int CalibrateRF(struct tda_state *state, + u8 RFBand, u32 freq, s32 *pCprog) +{ + int status = 0; + u8 Regs[NUM_REGS]; + do { + u8 BP_Filter = 0; + u8 GainTaper = 0; + u8 RFC_K = 0; + u8 RFC_M = 0; + + state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + state->m_Regs[EB18] |= 0x03; /* AGC1_Gain = 3 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + + /* Switching off LT (as datasheet says) causes calibration on C1 to fail */ + /* (Readout of Cprog is allways 255) */ + if (state->m_Regs[ID] != 0x83) /* C1: ID == 83, C2: ID == 84 */ + state->m_Regs[EP3] |= 0x40; /* SM_LT = 1 */ + + if (!(SearchMap1(m_BP_Filter_Map, freq, &BP_Filter) && + SearchMap1(m_GainTaper_Map, freq, &GainTaper) && + SearchMap3(m_KM_Map, freq, &RFC_K, &RFC_M))) + return -EINVAL; + + state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | BP_Filter; + state->m_Regs[EP2] = (RFBand << 5) | GainTaper; + + state->m_Regs[EB13] = (state->m_Regs[EB13] & ~0x7C) | (RFC_K << 4) | (RFC_M << 2); + + status = UpdateRegs(state, EP1, EP3); + if (status < 0) + break; + status = UpdateReg(state, EB13); + if (status < 0) + break; + + state->m_Regs[EB4] |= 0x20; /* LO_ForceSrce = 1 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + + state->m_Regs[EB7] |= 0x20; /* CAL_ForceSrce = 1 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + + state->m_Regs[EB14] = 0; /* RFC_Cprog = 0 */ + status = UpdateReg(state, EB14); + if (status < 0) + break; + + state->m_Regs[EB20] &= ~0x20; /* ForceLock = 0; */ + status = UpdateReg(state, EB20); + if (status < 0) + break; + + state->m_Regs[EP4] |= 0x03; /* CAL_Mode = 3 */ + status = UpdateRegs(state, EP4, EP5); + if (status < 0) + break; + + status = CalcCalPLL(state, freq); + if (status < 0) + break; + status = CalcMainPLL(state, freq + 1000000); + if (status < 0) + break; + + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + state->m_Regs[EB4] &= ~0x20; /* LO_ForceSrce = 0 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + + state->m_Regs[EB7] &= ~0x20; /* CAL_ForceSrce = 0 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + msleep(10); + + state->m_Regs[EB20] |= 0x20; /* ForceLock = 1; */ + status = UpdateReg(state, EB20); + if (status < 0) + break; + msleep(60); + + state->m_Regs[EP4] &= ~0x03; /* CAL_Mode = 0 */ + state->m_Regs[EP3] &= ~0x40; /* SM_LT = 0 */ + state->m_Regs[EB18] &= ~0x03; /* AGC1_Gain = 0 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + status = UpdateRegs(state, EP3, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + status = ReadExtented(state, Regs); + if (status < 0) + break; + + *pCprog = Regs[EB14]; + + } while (0); + return status; +} + +static int RFTrackingFiltersInit(struct tda_state *state, + u8 RFBand) +{ + int status = 0; + + u32 RF1 = m_RF_Band_Map[RFBand].m_RF1_Default; + u32 RF2 = m_RF_Band_Map[RFBand].m_RF2_Default; + u32 RF3 = m_RF_Band_Map[RFBand].m_RF3_Default; + bool bcal = false; + + s32 Cprog_cal1 = 0; + s32 Cprog_table1 = 0; + s32 Cprog_cal2 = 0; + s32 Cprog_table2 = 0; + s32 Cprog_cal3 = 0; + s32 Cprog_table3 = 0; + + state->m_RF_A1[RFBand] = 0; + state->m_RF_B1[RFBand] = 0; + state->m_RF_A2[RFBand] = 0; + state->m_RF_B2[RFBand] = 0; + + do { + status = PowerScan(state, RFBand, RF1, &RF1, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF1, &Cprog_cal1); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF1, &Cprog_table1); + if (!bcal) + Cprog_cal1 = Cprog_table1; + state->m_RF_B1[RFBand] = Cprog_cal1 - Cprog_table1; + /* state->m_RF_A1[RF_Band] = ???? */ + + if (RF2 == 0) + break; + + status = PowerScan(state, RFBand, RF2, &RF2, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF2, &Cprog_cal2); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF2, &Cprog_table2); + if (!bcal) + Cprog_cal2 = Cprog_table2; + + state->m_RF_A1[RFBand] = + (Cprog_cal2 - Cprog_table2 - Cprog_cal1 + Cprog_table1) / + ((s32)(RF2) - (s32)(RF1)); + + if (RF3 == 0) + break; + + status = PowerScan(state, RFBand, RF3, &RF3, &bcal); + if (status < 0) + break; + if (bcal) { + status = CalibrateRF(state, RFBand, RF3, &Cprog_cal3); + if (status < 0) + break; + } + SearchMap2(m_RF_Cal_Map, RF3, &Cprog_table3); + if (!bcal) + Cprog_cal3 = Cprog_table3; + state->m_RF_A2[RFBand] = (Cprog_cal3 - Cprog_table3 - Cprog_cal2 + Cprog_table2) / ((s32)(RF3) - (s32)(RF2)); + state->m_RF_B2[RFBand] = Cprog_cal2 - Cprog_table2; + + } while (0); + + state->m_RF1[RFBand] = RF1; + state->m_RF2[RFBand] = RF2; + state->m_RF3[RFBand] = RF3; + +#if 0 + printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__, + RFBand, RF1, state->m_RF_A1[RFBand], state->m_RF_B1[RFBand], RF2, + state->m_RF_A2[RFBand], state->m_RF_B2[RFBand], RF3); +#endif + + return status; +} + +static int PowerScan(struct tda_state *state, + u8 RFBand, u32 RF_in, u32 *pRF_Out, bool *pbcal) +{ + int status = 0; + do { + u8 Gain_Taper = 0; + s32 RFC_Cprog = 0; + u8 CID_Target = 0; + u8 CountLimit = 0; + u32 freq_MainPLL; + u8 Regs[NUM_REGS]; + u8 CID_Gain; + s32 Count = 0; + int sign = 1; + bool wait = false; + + if (!(SearchMap2(m_RF_Cal_Map, RF_in, &RFC_Cprog) && + SearchMap1(m_GainTaper_Map, RF_in, &Gain_Taper) && + SearchMap3(m_CID_Target_Map, RF_in, &CID_Target, &CountLimit))) { + + printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__); + return -EINVAL; + } + + state->m_Regs[EP2] = (RFBand << 5) | Gain_Taper; + state->m_Regs[EB14] = (RFC_Cprog); + status = UpdateReg(state, EP2); + if (status < 0) + break; + status = UpdateReg(state, EB14); + if (status < 0) + break; + + freq_MainPLL = RF_in + 1000000; + status = CalcMainPLL(state, freq_MainPLL); + if (status < 0) + break; + msleep(5); + state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x03) | 1; /* CAL_mode = 1 */ + status = UpdateReg(state, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP2); /* Launch power measurement */ + if (status < 0) + break; + status = ReadExtented(state, Regs); + if (status < 0) + break; + CID_Gain = Regs[EB10] & 0x3F; + state->m_Regs[ID] = Regs[ID]; /* Chip version, (needed for C1 workarround in CalibrateRF) */ + + *pRF_Out = RF_in; + + while (CID_Gain < CID_Target) { + freq_MainPLL = RF_in + sign * Count + 1000000; + status = CalcMainPLL(state, freq_MainPLL); + if (status < 0) + break; + msleep(wait ? 5 : 1); + wait = false; + status = UpdateReg(state, EP2); /* Launch power measurement */ + if (status < 0) + break; + status = ReadExtented(state, Regs); + if (status < 0) + break; + CID_Gain = Regs[EB10] & 0x3F; + Count += 200000; + + if (Count < CountLimit * 100000) + continue; + if (sign < 0) + break; + + sign = -sign; + Count = 200000; + wait = true; + } + status = status; + if (status < 0) + break; + if (CID_Gain >= CID_Target) { + *pbcal = true; + *pRF_Out = freq_MainPLL - 1000000; + } else + *pbcal = false; + } while (0); + + return status; +} + +static int PowerScanInit(struct tda_state *state) +{ + int status = 0; + do { + state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | 0x12; + state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x1F); /* If level = 0, Cal mode = 0 */ + status = UpdateRegs(state, EP3, EP4); + if (status < 0) + break; + state->m_Regs[EB18] = (state->m_Regs[EB18] & ~0x03); /* AGC 1 Gain = 0 */ + status = UpdateReg(state, EB18); + if (status < 0) + break; + state->m_Regs[EB21] = (state->m_Regs[EB21] & ~0x03); /* AGC 2 Gain = 0 (Datasheet = 3) */ + state->m_Regs[EB23] = (state->m_Regs[EB23] | 0x06); /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */ + status = UpdateRegs(state, EB21, EB23); + if (status < 0) + break; + } while (0); + return status; +} + +static int CalcRFFilterCurve(struct tda_state *state) +{ + int status = 0; + do { + msleep(200); /* Temperature stabilisation */ + status = PowerScanInit(state); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 0); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 1); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 2); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 3); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 4); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 5); + if (status < 0) + break; + status = RFTrackingFiltersInit(state, 6); + if (status < 0) + break; + status = ThermometerRead(state, &state->m_TMValue_RFCal); /* also switches off Cal mode !!! */ + if (status < 0) + break; + } while (0); + + return status; +} + +static int FixedContentsI2CUpdate(struct tda_state *state) +{ + static u8 InitRegs[] = { + 0x08, 0x80, 0xC6, + 0xDF, 0x16, 0x60, 0x80, + 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0xFC, 0x01, 0x84, 0x41, + 0x01, 0x84, 0x40, 0x07, + 0x00, 0x00, 0x96, 0x3F, + 0xC1, 0x00, 0x8F, 0x00, + 0x00, 0x8C, 0x00, 0x20, + 0xB3, 0x48, 0xB0, + }; + int status = 0; + memcpy(&state->m_Regs[TM], InitRegs, EB23 - TM + 1); + do { + status = UpdateRegs(state, TM, EB23); + if (status < 0) + break; + + /* AGC1 gain setup */ + state->m_Regs[EB17] = 0x00; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x03; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x43; + status = UpdateReg(state, EB17); + if (status < 0) + break; + state->m_Regs[EB17] = 0x4C; + status = UpdateReg(state, EB17); + if (status < 0) + break; + + /* IRC Cal Low band */ + state->m_Regs[EP3] = 0x1F; + state->m_Regs[EP4] = 0x66; + state->m_Regs[EP5] = 0x81; + state->m_Regs[CPD] = 0xCC; + state->m_Regs[CD1] = 0x6C; + state->m_Regs[CD2] = 0x00; + state->m_Regs[CD3] = 0x00; + state->m_Regs[MPD] = 0xC5; + state->m_Regs[MD1] = 0x77; + state->m_Regs[MD2] = 0x08; + state->m_Regs[MD3] = 0x00; + status = UpdateRegs(state, EP2, MD3); /* diff between sw and datasheet (ep3-md3) */ + if (status < 0) + break; + +#if 0 + state->m_Regs[EB4] = 0x61; /* missing in sw */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB4] = 0x41; + status = UpdateReg(state, EB4); + if (status < 0) + break; +#endif + + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + + state->m_Regs[EP5] = 0x85; + state->m_Regs[CPD] = 0xCB; + state->m_Regs[CD1] = 0x66; + state->m_Regs[CD2] = 0x70; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* IRC Cal mid band */ + state->m_Regs[EP5] = 0x82; + state->m_Regs[CPD] = 0xA8; + state->m_Regs[CD2] = 0x00; + state->m_Regs[MPD] = 0xA1; /* Datasheet = 0xA9 */ + state->m_Regs[MD1] = 0x73; + state->m_Regs[MD2] = 0x1A; + status = UpdateRegs(state, EP3, MD3); + if (status < 0) + break; + + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + + state->m_Regs[EP5] = 0x86; + state->m_Regs[CPD] = 0xA8; + state->m_Regs[CD1] = 0x66; + state->m_Regs[CD2] = 0xA0; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* IRC Cal high band */ + state->m_Regs[EP5] = 0x83; + state->m_Regs[CPD] = 0x98; + state->m_Regs[CD1] = 0x65; + state->m_Regs[CD2] = 0x00; + state->m_Regs[MPD] = 0x91; /* Datasheet = 0x91 */ + state->m_Regs[MD1] = 0x71; + state->m_Regs[MD2] = 0xCD; + status = UpdateRegs(state, EP3, MD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP1); + if (status < 0) + break; + msleep(5); + state->m_Regs[EP5] = 0x87; + state->m_Regs[CD1] = 0x65; + state->m_Regs[CD2] = 0x50; + status = UpdateRegs(state, EP3, CD3); + if (status < 0) + break; + msleep(5); + status = UpdateReg(state, EP2); + if (status < 0) + break; + msleep(30); + + /* Back to normal */ + state->m_Regs[EP4] = 0x64; + status = UpdateReg(state, EP4); + if (status < 0) + break; + status = UpdateReg(state, EP1); + if (status < 0) + break; + + } while (0); + return status; +} + +static int InitCal(struct tda_state *state) +{ + int status = 0; + + do { + status = FixedContentsI2CUpdate(state); + if (status < 0) + break; + status = CalcRFFilterCurve(state); + if (status < 0) + break; + status = StandBy(state); + if (status < 0) + break; + /* m_bInitDone = true; */ + } while (0); + return status; +}; + +static int RFTrackingFiltersCorrection(struct tda_state *state, + u32 Frequency) +{ + int status = 0; + s32 Cprog_table; + u8 RFBand; + u8 dCoverdT; + + if (!SearchMap2(m_RF_Cal_Map, Frequency, &Cprog_table) || + !SearchMap4(m_RF_Band_Map, Frequency, &RFBand) || + !SearchMap1(m_RF_Cal_DC_Over_DT_Map, Frequency, &dCoverdT)) + + return -EINVAL; + + do { + u8 TMValue_Current; + u32 RF1 = state->m_RF1[RFBand]; + u32 RF2 = state->m_RF1[RFBand]; + u32 RF3 = state->m_RF1[RFBand]; + s32 RF_A1 = state->m_RF_A1[RFBand]; + s32 RF_B1 = state->m_RF_B1[RFBand]; + s32 RF_A2 = state->m_RF_A2[RFBand]; + s32 RF_B2 = state->m_RF_B2[RFBand]; + s32 Capprox = 0; + int TComp; + + state->m_Regs[EP3] &= ~0xE0; /* Power up */ + status = UpdateReg(state, EP3); + if (status < 0) + break; + + status = ThermometerRead(state, &TMValue_Current); + if (status < 0) + break; + + if (RF3 == 0 || Frequency < RF2) + Capprox = RF_A1 * ((s32)(Frequency) - (s32)(RF1)) + RF_B1 + Cprog_table; + else + Capprox = RF_A2 * ((s32)(Frequency) - (s32)(RF2)) + RF_B2 + Cprog_table; + + TComp = (int)(dCoverdT) * ((int)(TMValue_Current) - (int)(state->m_TMValue_RFCal))/1000; + + Capprox += TComp; + + if (Capprox < 0) + Capprox = 0; + else if (Capprox > 255) + Capprox = 255; + + + /* TODO Temperature compensation. There is defenitely a scale factor */ + /* missing in the datasheet, so leave it out for now. */ + state->m_Regs[EB14] = Capprox; + + status = UpdateReg(state, EB14); + if (status < 0) + break; + + } while (0); + return status; +} + +static int ChannelConfiguration(struct tda_state *state, + u32 Frequency, int Standard) +{ + + s32 IntermediateFrequency = m_StandardTable[Standard].m_IFFrequency; + int status = 0; + + u8 BP_Filter = 0; + u8 RF_Band = 0; + u8 GainTaper = 0; + u8 IR_Meas = 0; + + state->IF = IntermediateFrequency; + /* printk("tda18271c2dd: %s Freq = %d Standard = %d IF = %d\n", __func__, Frequency, Standard, IntermediateFrequency); */ + /* get values from tables */ + + if (!(SearchMap1(m_BP_Filter_Map, Frequency, &BP_Filter) && + SearchMap1(m_GainTaper_Map, Frequency, &GainTaper) && + SearchMap1(m_IR_Meas_Map, Frequency, &IR_Meas) && + SearchMap4(m_RF_Band_Map, Frequency, &RF_Band))) { + + printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__); + return -EINVAL; + } + + do { + state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | m_StandardTable[Standard].m_EP3_4_0; + state->m_Regs[EP3] &= ~0x04; /* switch RFAGC to high speed mode */ + + /* m_EP4 default for XToutOn, CAL_Mode (0) */ + state->m_Regs[EP4] = state->m_EP4 | ((Standard > HF_AnalogMax) ? state->m_IFLevelDigital : state->m_IFLevelAnalog); + /* state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; */ + if (Standard <= HF_AnalogMax) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelAnalog; + else if (Standard <= HF_ATSC) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBT; + else if (Standard <= HF_DVBC) + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBC; + else + state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; + + if ((Standard == HF_FM_Radio) && state->m_bFMInput) + state->m_Regs[EP4] |= 80; + + state->m_Regs[MPD] &= ~0x80; + if (Standard > HF_AnalogMax) + state->m_Regs[MPD] |= 0x80; /* Add IF_notch for digital */ + + state->m_Regs[EB22] = m_StandardTable[Standard].m_EB22; + + /* Note: This is missing from flowchart in TDA18271 specification ( 1.5 MHz cutoff for FM ) */ + if (Standard == HF_FM_Radio) + state->m_Regs[EB23] |= 0x06; /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */ + else + state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LPFc[2] = 0 */ + + status = UpdateRegs(state, EB22, EB23); + if (status < 0) + break; + + state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | 0x40 | BP_Filter; /* Dis_Power_level = 1, Filter */ + state->m_Regs[EP5] = (state->m_Regs[EP5] & ~0x07) | IR_Meas; + state->m_Regs[EP2] = (RF_Band << 5) | GainTaper; + + state->m_Regs[EB1] = (state->m_Regs[EB1] & ~0x07) | + (state->m_bMaster ? 0x04 : 0x00); /* CALVCO_FortLOn = MS */ + /* AGC1_always_master = 0 */ + /* AGC_firstn = 0 */ + status = UpdateReg(state, EB1); + if (status < 0) + break; + + if (state->m_bMaster) { + status = CalcMainPLL(state, Frequency + IntermediateFrequency); + if (status < 0) + break; + status = UpdateRegs(state, TM, EP5); + if (status < 0) + break; + state->m_Regs[EB4] |= 0x20; /* LO_forceSrce = 1 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB4] &= ~0x20; /* LO_forceSrce = 0 */ + status = UpdateReg(state, EB4); + if (status < 0) + break; + } else { + u8 PostDiv = 0; + u8 Div; + status = CalcCalPLL(state, Frequency + IntermediateFrequency); + if (status < 0) + break; + + SearchMap3(m_Cal_PLL_Map, Frequency + IntermediateFrequency, &PostDiv, &Div); + state->m_Regs[MPD] = (state->m_Regs[MPD] & ~0x7F) | (PostDiv & 0x77); + status = UpdateReg(state, MPD); + if (status < 0) + break; + status = UpdateRegs(state, TM, EP5); + if (status < 0) + break; + + state->m_Regs[EB7] |= 0x20; /* CAL_forceSrce = 1 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + msleep(1); + state->m_Regs[EB7] &= ~0x20; /* CAL_forceSrce = 0 */ + status = UpdateReg(state, EB7); + if (status < 0) + break; + } + msleep(20); + if (Standard != HF_FM_Radio) + state->m_Regs[EP3] |= 0x04; /* RFAGC to normal mode */ + status = UpdateReg(state, EP3); + if (status < 0) + break; + + } while (0); + return status; +} + +static int sleep(struct dvb_frontend *fe) +{ + struct tda_state *state = fe->tuner_priv; + + StandBy(state); + return 0; +} + +static int init(struct dvb_frontend *fe) +{ + return 0; +} + +static int release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +/* + * As defined on EN 300 429 Annex A and on ITU-T J.83 annex A, the DVB-C + * roll-off factor is 0.15. + * According with the specs, the amount of the needed bandwith is given by: + * Bw = Symbol_rate * (1 + 0.15) + * As such, the maximum symbol rate supported by 6 MHz is + * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds + *NOTE: For ITU-T J.83 Annex C, the roll-off factor is 0.13. So: + * max_symbol_rate = 6 MHz / 1.13 = 5309735 Baud + * That means that an adjustment is needed for Japan, + * but, as currently DRX-K is hardcoded to Annex A, let's stick + * with 0.15 roll-off factor. + */ +#define MAX_SYMBOL_RATE_6MHz 5217391 + +static int set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct tda_state *state = fe->tuner_priv; + int status = 0; + int Standard; + + state->m_Frequency = params->frequency; + + if (fe->ops.info.type == FE_OFDM) + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + Standard = HF_DVBT_6MHZ; + break; + case BANDWIDTH_7_MHZ: + Standard = HF_DVBT_7MHZ; + break; + default: + case BANDWIDTH_8_MHZ: + Standard = HF_DVBT_8MHZ; + break; + } + else if (fe->ops.info.type == FE_QAM) { + if (params->u.qam.symbol_rate <= MAX_SYMBOL_RATE_6MHz) + Standard = HF_DVBC_6MHZ; + else + Standard = HF_DVBC_8MHZ; + } else + return -EINVAL; + do { + status = RFTrackingFiltersCorrection(state, params->frequency); + if (status < 0) + break; + status = ChannelConfiguration(state, params->frequency, Standard); + if (status < 0) + break; + + msleep(state->m_SettlingTime); /* Allow AGC's to settle down */ + } while (0); + return status; +} + +#if 0 +static int GetSignalStrength(s32 *pSignalStrength, u32 RFAgc, u32 IFAgc) +{ + if (IFAgc < 500) { + /* Scale this from 0 to 50000 */ + *pSignalStrength = IFAgc * 100; + } else { + /* Scale range 500-1500 to 50000-80000 */ + *pSignalStrength = 50000 + (IFAgc - 500) * 30; + } + + return 0; +} +#endif + +static int get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda_state *state = fe->tuner_priv; + + *frequency = state->IF; + return 0; +} + +static int get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + /* struct tda_state *state = fe->tuner_priv; */ + /* *bandwidth = priv->bandwidth; */ + return 0; +} + + +static struct dvb_tuner_ops tuner_ops = { + .info = { + .name = "NXP TDA18271C2D", + .frequency_min = 47125000, + .frequency_max = 865000000, + .frequency_step = 62500 + }, + .init = init, + .sleep = sleep, + .set_params = set_params, + .release = release, + .get_frequency = get_frequency, + .get_bandwidth = get_bandwidth, +}; + +struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr) +{ + struct tda_state *state; + + state = kzalloc(sizeof(struct tda_state), GFP_KERNEL); + if (!state) + return NULL; + + fe->tuner_priv = state; + state->adr = adr; + state->i2c = i2c; + memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops)); + reset(state); + InitCal(state); + + return fe; +} +EXPORT_SYMBOL_GPL(tda18271c2dd_attach); + +MODULE_DESCRIPTION("TDA18271C2 driver"); +MODULE_AUTHOR("DD"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/tda18271c2dd.h b/drivers/media/dvb/frontends/tda18271c2dd.h new file mode 100644 index 0000000..1389c74 --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271c2dd.h @@ -0,0 +1,16 @@ +#ifndef _TDA18271C2DD_H_ +#define _TDA18271C2DD_H_ +#if defined(CONFIG_DVB_TDA18271C2DD) || (defined(CONFIG_DVB_TDA18271C2DD_MODULE) \ + && defined(MODULE)) +struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr); +#else +static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, u8 adr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/tda18271c2dd_maps.h b/drivers/media/dvb/frontends/tda18271c2dd_maps.h new file mode 100644 index 0000000..b87661b --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271c2dd_maps.h @@ -0,0 +1,814 @@ +enum HF_S { + HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio, + HF_AnalogMax, HF_DVBT_6MHZ, HF_DVBT_7MHZ, HF_DVBT_8MHZ, + HF_DVBT, HF_ATSC, HF_DVBC_6MHZ, HF_DVBC_7MHZ, + HF_DVBC_8MHZ, HF_DVBC +}; + +struct SStandardParam m_StandardTable[] = { + { 0, 0, 0x00, 0x00 }, /* HF_None */ + { 6000000, 7000000, 0x1D, 0x2C }, /* HF_B, */ + { 6900000, 8000000, 0x1E, 0x2C }, /* HF_DK, */ + { 7100000, 8000000, 0x1E, 0x2C }, /* HF_G, */ + { 7250000, 8000000, 0x1E, 0x2C }, /* HF_I, */ + { 6900000, 8000000, 0x1E, 0x2C }, /* HF_L, */ + { 1250000, 8000000, 0x1E, 0x2C }, /* HF_L1, */ + { 5400000, 6000000, 0x1C, 0x2C }, /* HF_MN, */ + { 1250000, 500000, 0x18, 0x2C }, /* HF_FM_Radio, */ + { 0, 0, 0x00, 0x00 }, /* HF_AnalogMax (Unused) */ + { 3300000, 6000000, 0x1C, 0x58 }, /* HF_DVBT_6MHZ */ + { 3500000, 7000000, 0x1C, 0x37 }, /* HF_DVBT_7MHZ */ + { 4000000, 8000000, 0x1D, 0x37 }, /* HF_DVBT_8MHZ */ + { 0, 0, 0x00, 0x00 }, /* HF_DVBT (Unused) */ + { 5000000, 6000000, 0x1C, 0x37 }, /* HF_ATSC (center = 3.25 MHz) */ + { 4000000, 6000000, 0x1D, 0x58 }, /* HF_DVBC_6MHZ (Chicago) */ + { 4500000, 7000000, 0x1E, 0x37 }, /* HF_DVBC_7MHZ (not documented by NXP) */ + { 5000000, 8000000, 0x1F, 0x37 }, /* HF_DVBC_8MHZ */ + { 0, 0, 0x00, 0x00 }, /* HF_DVBC (Unused) */ +}; + +struct SMap m_BP_Filter_Map[] = { + { 62000000, 0x00 }, + { 84000000, 0x01 }, + { 100000000, 0x02 }, + { 140000000, 0x03 }, + { 170000000, 0x04 }, + { 180000000, 0x05 }, + { 865000000, 0x06 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMapI m_RF_Cal_Map[] = { + { 41000000, 0x0F }, + { 43000000, 0x1C }, + { 45000000, 0x2F }, + { 46000000, 0x39 }, + { 47000000, 0x40 }, + { 47900000, 0x50 }, + { 49100000, 0x16 }, + { 50000000, 0x18 }, + { 51000000, 0x20 }, + { 53000000, 0x28 }, + { 55000000, 0x2B }, + { 56000000, 0x32 }, + { 57000000, 0x35 }, + { 58000000, 0x3E }, + { 59000000, 0x43 }, + { 60000000, 0x4E }, + { 61100000, 0x55 }, + { 63000000, 0x0F }, + { 64000000, 0x11 }, + { 65000000, 0x12 }, + { 66000000, 0x15 }, + { 67000000, 0x16 }, + { 68000000, 0x17 }, + { 70000000, 0x19 }, + { 71000000, 0x1C }, + { 72000000, 0x1D }, + { 73000000, 0x1F }, + { 74000000, 0x20 }, + { 75000000, 0x21 }, + { 76000000, 0x24 }, + { 77000000, 0x25 }, + { 78000000, 0x27 }, + { 80000000, 0x28 }, + { 81000000, 0x29 }, + { 82000000, 0x2D }, + { 83000000, 0x2E }, + { 84000000, 0x2F }, + { 85000000, 0x31 }, + { 86000000, 0x33 }, + { 87000000, 0x34 }, + { 88000000, 0x35 }, + { 89000000, 0x37 }, + { 90000000, 0x38 }, + { 91000000, 0x39 }, + { 93000000, 0x3C }, + { 94000000, 0x3E }, + { 95000000, 0x3F }, + { 96000000, 0x40 }, + { 97000000, 0x42 }, + { 99000000, 0x45 }, + { 100000000, 0x46 }, + { 102000000, 0x48 }, + { 103000000, 0x4A }, + { 105000000, 0x4D }, + { 106000000, 0x4E }, + { 107000000, 0x50 }, + { 108000000, 0x51 }, + { 110000000, 0x54 }, + { 111000000, 0x56 }, + { 112000000, 0x57 }, + { 113000000, 0x58 }, + { 114000000, 0x59 }, + { 115000000, 0x5C }, + { 116000000, 0x5D }, + { 117000000, 0x5F }, + { 119000000, 0x60 }, + { 120000000, 0x64 }, + { 121000000, 0x65 }, + { 122000000, 0x66 }, + { 123000000, 0x68 }, + { 124000000, 0x69 }, + { 125000000, 0x6C }, + { 126000000, 0x6D }, + { 127000000, 0x6E }, + { 128000000, 0x70 }, + { 129000000, 0x71 }, + { 130000000, 0x75 }, + { 131000000, 0x77 }, + { 132000000, 0x78 }, + { 133000000, 0x7B }, + { 134000000, 0x7E }, + { 135000000, 0x81 }, + { 136000000, 0x82 }, + { 137000000, 0x87 }, + { 138000000, 0x88 }, + { 139000000, 0x8D }, + { 140000000, 0x8E }, + { 141000000, 0x91 }, + { 142000000, 0x95 }, + { 143000000, 0x9A }, + { 144000000, 0x9D }, + { 145000000, 0xA1 }, + { 146000000, 0xA2 }, + { 147000000, 0xA4 }, + { 148000000, 0xA9 }, + { 149000000, 0xAE }, + { 150000000, 0xB0 }, + { 151000000, 0xB1 }, + { 152000000, 0xB7 }, + { 152600000, 0xBD }, + { 154000000, 0x20 }, + { 155000000, 0x22 }, + { 156000000, 0x24 }, + { 157000000, 0x25 }, + { 158000000, 0x27 }, + { 159000000, 0x29 }, + { 160000000, 0x2C }, + { 161000000, 0x2D }, + { 163000000, 0x2E }, + { 164000000, 0x2F }, + { 164700000, 0x30 }, + { 166000000, 0x11 }, + { 167000000, 0x12 }, + { 168000000, 0x13 }, + { 169000000, 0x14 }, + { 170000000, 0x15 }, + { 172000000, 0x16 }, + { 173000000, 0x17 }, + { 174000000, 0x18 }, + { 175000000, 0x1A }, + { 176000000, 0x1B }, + { 178000000, 0x1D }, + { 179000000, 0x1E }, + { 180000000, 0x1F }, + { 181000000, 0x20 }, + { 182000000, 0x21 }, + { 183000000, 0x22 }, + { 184000000, 0x24 }, + { 185000000, 0x25 }, + { 186000000, 0x26 }, + { 187000000, 0x27 }, + { 188000000, 0x29 }, + { 189000000, 0x2A }, + { 190000000, 0x2C }, + { 191000000, 0x2D }, + { 192000000, 0x2E }, + { 193000000, 0x2F }, + { 194000000, 0x30 }, + { 195000000, 0x33 }, + { 196000000, 0x35 }, + { 198000000, 0x36 }, + { 200000000, 0x38 }, + { 201000000, 0x3C }, + { 202000000, 0x3D }, + { 203500000, 0x3E }, + { 206000000, 0x0E }, + { 208000000, 0x0F }, + { 212000000, 0x10 }, + { 216000000, 0x11 }, + { 217000000, 0x12 }, + { 218000000, 0x13 }, + { 220000000, 0x14 }, + { 222000000, 0x15 }, + { 225000000, 0x16 }, + { 228000000, 0x17 }, + { 231000000, 0x18 }, + { 234000000, 0x19 }, + { 235000000, 0x1A }, + { 236000000, 0x1B }, + { 237000000, 0x1C }, + { 240000000, 0x1D }, + { 242000000, 0x1E }, + { 244000000, 0x1F }, + { 247000000, 0x20 }, + { 249000000, 0x21 }, + { 252000000, 0x22 }, + { 253000000, 0x23 }, + { 254000000, 0x24 }, + { 256000000, 0x25 }, + { 259000000, 0x26 }, + { 262000000, 0x27 }, + { 264000000, 0x28 }, + { 267000000, 0x29 }, + { 269000000, 0x2A }, + { 271000000, 0x2B }, + { 273000000, 0x2C }, + { 275000000, 0x2D }, + { 277000000, 0x2E }, + { 279000000, 0x2F }, + { 282000000, 0x30 }, + { 284000000, 0x31 }, + { 286000000, 0x32 }, + { 287000000, 0x33 }, + { 290000000, 0x34 }, + { 293000000, 0x35 }, + { 295000000, 0x36 }, + { 297000000, 0x37 }, + { 300000000, 0x38 }, + { 303000000, 0x39 }, + { 305000000, 0x3A }, + { 306000000, 0x3B }, + { 307000000, 0x3C }, + { 310000000, 0x3D }, + { 312000000, 0x3E }, + { 315000000, 0x3F }, + { 318000000, 0x40 }, + { 320000000, 0x41 }, + { 323000000, 0x42 }, + { 324000000, 0x43 }, + { 325000000, 0x44 }, + { 327000000, 0x45 }, + { 331000000, 0x46 }, + { 334000000, 0x47 }, + { 337000000, 0x48 }, + { 339000000, 0x49 }, + { 340000000, 0x4A }, + { 341000000, 0x4B }, + { 343000000, 0x4C }, + { 345000000, 0x4D }, + { 349000000, 0x4E }, + { 352000000, 0x4F }, + { 353000000, 0x50 }, + { 355000000, 0x51 }, + { 357000000, 0x52 }, + { 359000000, 0x53 }, + { 361000000, 0x54 }, + { 362000000, 0x55 }, + { 364000000, 0x56 }, + { 368000000, 0x57 }, + { 370000000, 0x58 }, + { 372000000, 0x59 }, + { 375000000, 0x5A }, + { 376000000, 0x5B }, + { 377000000, 0x5C }, + { 379000000, 0x5D }, + { 382000000, 0x5E }, + { 384000000, 0x5F }, + { 385000000, 0x60 }, + { 386000000, 0x61 }, + { 388000000, 0x62 }, + { 390000000, 0x63 }, + { 393000000, 0x64 }, + { 394000000, 0x65 }, + { 396000000, 0x66 }, + { 397000000, 0x67 }, + { 398000000, 0x68 }, + { 400000000, 0x69 }, + { 402000000, 0x6A }, + { 403000000, 0x6B }, + { 407000000, 0x6C }, + { 408000000, 0x6D }, + { 409000000, 0x6E }, + { 410000000, 0x6F }, + { 411000000, 0x70 }, + { 412000000, 0x71 }, + { 413000000, 0x72 }, + { 414000000, 0x73 }, + { 417000000, 0x74 }, + { 418000000, 0x75 }, + { 420000000, 0x76 }, + { 422000000, 0x77 }, + { 423000000, 0x78 }, + { 424000000, 0x79 }, + { 427000000, 0x7A }, + { 428000000, 0x7B }, + { 429000000, 0x7D }, + { 432000000, 0x7F }, + { 434000000, 0x80 }, + { 435000000, 0x81 }, + { 436000000, 0x83 }, + { 437000000, 0x84 }, + { 438000000, 0x85 }, + { 439000000, 0x86 }, + { 440000000, 0x87 }, + { 441000000, 0x88 }, + { 442000000, 0x89 }, + { 445000000, 0x8A }, + { 446000000, 0x8B }, + { 447000000, 0x8C }, + { 448000000, 0x8E }, + { 449000000, 0x8F }, + { 450000000, 0x90 }, + { 452000000, 0x91 }, + { 453000000, 0x93 }, + { 454000000, 0x94 }, + { 456000000, 0x96 }, + { 457800000, 0x98 }, + { 461000000, 0x11 }, + { 468000000, 0x12 }, + { 472000000, 0x13 }, + { 473000000, 0x14 }, + { 474000000, 0x15 }, + { 481000000, 0x16 }, + { 486000000, 0x17 }, + { 491000000, 0x18 }, + { 498000000, 0x19 }, + { 499000000, 0x1A }, + { 501000000, 0x1B }, + { 506000000, 0x1C }, + { 511000000, 0x1D }, + { 516000000, 0x1E }, + { 520000000, 0x1F }, + { 521000000, 0x20 }, + { 525000000, 0x21 }, + { 529000000, 0x22 }, + { 533000000, 0x23 }, + { 539000000, 0x24 }, + { 541000000, 0x25 }, + { 547000000, 0x26 }, + { 549000000, 0x27 }, + { 551000000, 0x28 }, + { 556000000, 0x29 }, + { 561000000, 0x2A }, + { 563000000, 0x2B }, + { 565000000, 0x2C }, + { 569000000, 0x2D }, + { 571000000, 0x2E }, + { 577000000, 0x2F }, + { 580000000, 0x30 }, + { 582000000, 0x31 }, + { 584000000, 0x32 }, + { 588000000, 0x33 }, + { 591000000, 0x34 }, + { 596000000, 0x35 }, + { 598000000, 0x36 }, + { 603000000, 0x37 }, + { 604000000, 0x38 }, + { 606000000, 0x39 }, + { 612000000, 0x3A }, + { 615000000, 0x3B }, + { 617000000, 0x3C }, + { 621000000, 0x3D }, + { 622000000, 0x3E }, + { 625000000, 0x3F }, + { 632000000, 0x40 }, + { 633000000, 0x41 }, + { 634000000, 0x42 }, + { 642000000, 0x43 }, + { 643000000, 0x44 }, + { 647000000, 0x45 }, + { 650000000, 0x46 }, + { 652000000, 0x47 }, + { 657000000, 0x48 }, + { 661000000, 0x49 }, + { 662000000, 0x4A }, + { 665000000, 0x4B }, + { 667000000, 0x4C }, + { 670000000, 0x4D }, + { 673000000, 0x4E }, + { 676000000, 0x4F }, + { 677000000, 0x50 }, + { 681000000, 0x51 }, + { 683000000, 0x52 }, + { 686000000, 0x53 }, + { 688000000, 0x54 }, + { 689000000, 0x55 }, + { 691000000, 0x56 }, + { 695000000, 0x57 }, + { 698000000, 0x58 }, + { 703000000, 0x59 }, + { 704000000, 0x5A }, + { 705000000, 0x5B }, + { 707000000, 0x5C }, + { 710000000, 0x5D }, + { 712000000, 0x5E }, + { 717000000, 0x5F }, + { 718000000, 0x60 }, + { 721000000, 0x61 }, + { 722000000, 0x62 }, + { 723000000, 0x63 }, + { 725000000, 0x64 }, + { 727000000, 0x65 }, + { 730000000, 0x66 }, + { 732000000, 0x67 }, + { 735000000, 0x68 }, + { 740000000, 0x69 }, + { 741000000, 0x6A }, + { 742000000, 0x6B }, + { 743000000, 0x6C }, + { 745000000, 0x6D }, + { 747000000, 0x6E }, + { 748000000, 0x6F }, + { 750000000, 0x70 }, + { 752000000, 0x71 }, + { 754000000, 0x72 }, + { 757000000, 0x73 }, + { 758000000, 0x74 }, + { 760000000, 0x75 }, + { 763000000, 0x76 }, + { 764000000, 0x77 }, + { 766000000, 0x78 }, + { 767000000, 0x79 }, + { 768000000, 0x7A }, + { 773000000, 0x7B }, + { 774000000, 0x7C }, + { 776000000, 0x7D }, + { 777000000, 0x7E }, + { 778000000, 0x7F }, + { 779000000, 0x80 }, + { 781000000, 0x81 }, + { 783000000, 0x82 }, + { 784000000, 0x83 }, + { 785000000, 0x84 }, + { 786000000, 0x85 }, + { 793000000, 0x86 }, + { 794000000, 0x87 }, + { 795000000, 0x88 }, + { 797000000, 0x89 }, + { 799000000, 0x8A }, + { 801000000, 0x8B }, + { 802000000, 0x8C }, + { 803000000, 0x8D }, + { 804000000, 0x8E }, + { 810000000, 0x90 }, + { 811000000, 0x91 }, + { 812000000, 0x92 }, + { 814000000, 0x93 }, + { 816000000, 0x94 }, + { 817000000, 0x96 }, + { 818000000, 0x97 }, + { 820000000, 0x98 }, + { 821000000, 0x99 }, + { 822000000, 0x9A }, + { 828000000, 0x9B }, + { 829000000, 0x9D }, + { 830000000, 0x9F }, + { 831000000, 0xA0 }, + { 833000000, 0xA1 }, + { 835000000, 0xA2 }, + { 836000000, 0xA3 }, + { 837000000, 0xA4 }, + { 838000000, 0xA6 }, + { 840000000, 0xA8 }, + { 842000000, 0xA9 }, + { 845000000, 0xAA }, + { 846000000, 0xAB }, + { 847000000, 0xAD }, + { 848000000, 0xAE }, + { 852000000, 0xAF }, + { 853000000, 0xB0 }, + { 858000000, 0xB1 }, + { 860000000, 0xB2 }, + { 861000000, 0xB3 }, + { 862000000, 0xB4 }, + { 863000000, 0xB6 }, + { 864000000, 0xB8 }, + { 865000000, 0xB9 }, + { 0, 0x00 }, /* Table End */ +}; + + +static struct SMap2 m_KM_Map[] = { + { 47900000, 3, 2 }, + { 61100000, 3, 1 }, + { 350000000, 3, 0 }, + { 720000000, 2, 1 }, + { 865000000, 3, 3 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_Main_PLL_Map[] = { + { 33125000, 0x57, 0xF0 }, + { 35500000, 0x56, 0xE0 }, + { 38188000, 0x55, 0xD0 }, + { 41375000, 0x54, 0xC0 }, + { 45125000, 0x53, 0xB0 }, + { 49688000, 0x52, 0xA0 }, + { 55188000, 0x51, 0x90 }, + { 62125000, 0x50, 0x80 }, + { 66250000, 0x47, 0x78 }, + { 71000000, 0x46, 0x70 }, + { 76375000, 0x45, 0x68 }, + { 82750000, 0x44, 0x60 }, + { 90250000, 0x43, 0x58 }, + { 99375000, 0x42, 0x50 }, + { 110375000, 0x41, 0x48 }, + { 124250000, 0x40, 0x40 }, + { 132500000, 0x37, 0x3C }, + { 142000000, 0x36, 0x38 }, + { 152750000, 0x35, 0x34 }, + { 165500000, 0x34, 0x30 }, + { 180500000, 0x33, 0x2C }, + { 198750000, 0x32, 0x28 }, + { 220750000, 0x31, 0x24 }, + { 248500000, 0x30, 0x20 }, + { 265000000, 0x27, 0x1E }, + { 284000000, 0x26, 0x1C }, + { 305500000, 0x25, 0x1A }, + { 331000000, 0x24, 0x18 }, + { 361000000, 0x23, 0x16 }, + { 397500000, 0x22, 0x14 }, + { 441500000, 0x21, 0x12 }, + { 497000000, 0x20, 0x10 }, + { 530000000, 0x17, 0x0F }, + { 568000000, 0x16, 0x0E }, + { 611000000, 0x15, 0x0D }, + { 662000000, 0x14, 0x0C }, + { 722000000, 0x13, 0x0B }, + { 795000000, 0x12, 0x0A }, + { 883000000, 0x11, 0x09 }, + { 994000000, 0x10, 0x08 }, + { 0, 0x00, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_Cal_PLL_Map[] = { + { 33813000, 0xDD, 0xD0 }, + { 36625000, 0xDC, 0xC0 }, + { 39938000, 0xDB, 0xB0 }, + { 43938000, 0xDA, 0xA0 }, + { 48813000, 0xD9, 0x90 }, + { 54938000, 0xD8, 0x80 }, + { 62813000, 0xD3, 0x70 }, + { 67625000, 0xCD, 0x68 }, + { 73250000, 0xCC, 0x60 }, + { 79875000, 0xCB, 0x58 }, + { 87875000, 0xCA, 0x50 }, + { 97625000, 0xC9, 0x48 }, + { 109875000, 0xC8, 0x40 }, + { 125625000, 0xC3, 0x38 }, + { 135250000, 0xBD, 0x34 }, + { 146500000, 0xBC, 0x30 }, + { 159750000, 0xBB, 0x2C }, + { 175750000, 0xBA, 0x28 }, + { 195250000, 0xB9, 0x24 }, + { 219750000, 0xB8, 0x20 }, + { 251250000, 0xB3, 0x1C }, + { 270500000, 0xAD, 0x1A }, + { 293000000, 0xAC, 0x18 }, + { 319500000, 0xAB, 0x16 }, + { 351500000, 0xAA, 0x14 }, + { 390500000, 0xA9, 0x12 }, + { 439500000, 0xA8, 0x10 }, + { 502500000, 0xA3, 0x0E }, + { 541000000, 0x9D, 0x0D }, + { 586000000, 0x9C, 0x0C }, + { 639000000, 0x9B, 0x0B }, + { 703000000, 0x9A, 0x0A }, + { 781000000, 0x99, 0x09 }, + { 879000000, 0x98, 0x08 }, + { 0, 0x00, 0x00 }, /* Table End */ +}; + +static struct SMap m_GainTaper_Map[] = { + { 45400000, 0x1F }, + { 45800000, 0x1E }, + { 46200000, 0x1D }, + { 46700000, 0x1C }, + { 47100000, 0x1B }, + { 47500000, 0x1A }, + { 47900000, 0x19 }, + { 49600000, 0x17 }, + { 51200000, 0x16 }, + { 52900000, 0x15 }, + { 54500000, 0x14 }, + { 56200000, 0x13 }, + { 57800000, 0x12 }, + { 59500000, 0x11 }, + { 61100000, 0x10 }, + { 67600000, 0x0D }, + { 74200000, 0x0C }, + { 80700000, 0x0B }, + { 87200000, 0x0A }, + { 93800000, 0x09 }, + { 100300000, 0x08 }, + { 106900000, 0x07 }, + { 113400000, 0x06 }, + { 119900000, 0x05 }, + { 126500000, 0x04 }, + { 133000000, 0x03 }, + { 139500000, 0x02 }, + { 146100000, 0x01 }, + { 152600000, 0x00 }, + { 154300000, 0x1F }, + { 156100000, 0x1E }, + { 157800000, 0x1D }, + { 159500000, 0x1C }, + { 161200000, 0x1B }, + { 163000000, 0x1A }, + { 164700000, 0x19 }, + { 170200000, 0x17 }, + { 175800000, 0x16 }, + { 181300000, 0x15 }, + { 186900000, 0x14 }, + { 192400000, 0x13 }, + { 198000000, 0x12 }, + { 203500000, 0x11 }, + { 216200000, 0x14 }, + { 228900000, 0x13 }, + { 241600000, 0x12 }, + { 254400000, 0x11 }, + { 267100000, 0x10 }, + { 279800000, 0x0F }, + { 292500000, 0x0E }, + { 305200000, 0x0D }, + { 317900000, 0x0C }, + { 330700000, 0x0B }, + { 343400000, 0x0A }, + { 356100000, 0x09 }, + { 368800000, 0x08 }, + { 381500000, 0x07 }, + { 394200000, 0x06 }, + { 406900000, 0x05 }, + { 419700000, 0x04 }, + { 432400000, 0x03 }, + { 445100000, 0x02 }, + { 457800000, 0x01 }, + { 476300000, 0x19 }, + { 494800000, 0x18 }, + { 513300000, 0x17 }, + { 531800000, 0x16 }, + { 550300000, 0x15 }, + { 568900000, 0x14 }, + { 587400000, 0x13 }, + { 605900000, 0x12 }, + { 624400000, 0x11 }, + { 642900000, 0x10 }, + { 661400000, 0x0F }, + { 679900000, 0x0E }, + { 698400000, 0x0D }, + { 716900000, 0x0C }, + { 735400000, 0x0B }, + { 753900000, 0x0A }, + { 772500000, 0x09 }, + { 791000000, 0x08 }, + { 809500000, 0x07 }, + { 828000000, 0x06 }, + { 846500000, 0x05 }, + { 865000000, 0x04 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap m_RF_Cal_DC_Over_DT_Map[] = { + { 47900000, 0x00 }, + { 55000000, 0x00 }, + { 61100000, 0x0A }, + { 64000000, 0x0A }, + { 82000000, 0x14 }, + { 84000000, 0x19 }, + { 119000000, 0x1C }, + { 124000000, 0x20 }, + { 129000000, 0x2A }, + { 134000000, 0x32 }, + { 139000000, 0x39 }, + { 144000000, 0x3E }, + { 149000000, 0x3F }, + { 152600000, 0x40 }, + { 154000000, 0x40 }, + { 164700000, 0x41 }, + { 203500000, 0x32 }, + { 353000000, 0x19 }, + { 356000000, 0x1A }, + { 359000000, 0x1B }, + { 363000000, 0x1C }, + { 366000000, 0x1D }, + { 369000000, 0x1E }, + { 373000000, 0x1F }, + { 376000000, 0x20 }, + { 379000000, 0x21 }, + { 383000000, 0x22 }, + { 386000000, 0x23 }, + { 389000000, 0x24 }, + { 393000000, 0x25 }, + { 396000000, 0x26 }, + { 399000000, 0x27 }, + { 402000000, 0x28 }, + { 404000000, 0x29 }, + { 407000000, 0x2A }, + { 409000000, 0x2B }, + { 412000000, 0x2C }, + { 414000000, 0x2D }, + { 417000000, 0x2E }, + { 419000000, 0x2F }, + { 422000000, 0x30 }, + { 424000000, 0x31 }, + { 427000000, 0x32 }, + { 429000000, 0x33 }, + { 432000000, 0x34 }, + { 434000000, 0x35 }, + { 437000000, 0x36 }, + { 439000000, 0x37 }, + { 442000000, 0x38 }, + { 444000000, 0x39 }, + { 447000000, 0x3A }, + { 449000000, 0x3B }, + { 457800000, 0x3C }, + { 465000000, 0x0F }, + { 477000000, 0x12 }, + { 483000000, 0x14 }, + { 502000000, 0x19 }, + { 508000000, 0x1B }, + { 519000000, 0x1C }, + { 522000000, 0x1D }, + { 524000000, 0x1E }, + { 534000000, 0x1F }, + { 549000000, 0x20 }, + { 554000000, 0x22 }, + { 584000000, 0x24 }, + { 589000000, 0x26 }, + { 658000000, 0x27 }, + { 664000000, 0x2C }, + { 669000000, 0x2D }, + { 699000000, 0x2E }, + { 704000000, 0x30 }, + { 709000000, 0x31 }, + { 714000000, 0x32 }, + { 724000000, 0x33 }, + { 729000000, 0x36 }, + { 739000000, 0x38 }, + { 744000000, 0x39 }, + { 749000000, 0x3B }, + { 754000000, 0x3C }, + { 759000000, 0x3D }, + { 764000000, 0x3E }, + { 769000000, 0x3F }, + { 774000000, 0x40 }, + { 779000000, 0x41 }, + { 784000000, 0x43 }, + { 789000000, 0x46 }, + { 794000000, 0x48 }, + { 799000000, 0x4B }, + { 804000000, 0x4F }, + { 809000000, 0x54 }, + { 814000000, 0x59 }, + { 819000000, 0x5D }, + { 824000000, 0x61 }, + { 829000000, 0x68 }, + { 834000000, 0x6E }, + { 839000000, 0x75 }, + { 844000000, 0x7E }, + { 849000000, 0x82 }, + { 854000000, 0x84 }, + { 859000000, 0x8F }, + { 865000000, 0x9A }, + { 0, 0x00 }, /* Table End */ +}; + + +static struct SMap m_IR_Meas_Map[] = { + { 200000000, 0x05 }, + { 400000000, 0x06 }, + { 865000000, 0x07 }, + { 0, 0x00 }, /* Table End */ +}; + +static struct SMap2 m_CID_Target_Map[] = { + { 46000000, 0x04, 18 }, + { 52200000, 0x0A, 15 }, + { 70100000, 0x01, 40 }, + { 136800000, 0x18, 40 }, + { 156700000, 0x18, 40 }, + { 186250000, 0x0A, 40 }, + { 230000000, 0x0A, 40 }, + { 345000000, 0x18, 40 }, + { 426000000, 0x0E, 40 }, + { 489500000, 0x1E, 40 }, + { 697500000, 0x32, 40 }, + { 842000000, 0x3A, 40 }, + { 0, 0x00, 0 }, /* Table End */ +}; + +static struct SRFBandMap m_RF_Band_Map[7] = { + { 47900000, 46000000, 0, 0}, + { 61100000, 52200000, 0, 0}, + { 152600000, 70100000, 136800000, 0}, + { 164700000, 156700000, 0, 0}, + { 203500000, 186250000, 0, 0}, + { 457800000, 230000000, 345000000, 426000000}, + { 865000000, 489500000, 697500000, 842000000}, +}; + +u8 m_Thermometer_Map_1[16] = { + 60, 62, 66, 64, + 74, 72, 68, 70, + 90, 88, 84, 86, + 76, 78, 82, 80, +}; + +u8 m_Thermometer_Map_2[16] = { + 92, 94, 98, 96, + 106, 104, 100, 102, + 122, 120, 116, 118, + 108, 110, 114, 112, +}; diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig index cec242b..64c8470 100644 --- a/drivers/media/dvb/ngene/Kconfig +++ b/drivers/media/dvb/ngene/Kconfig @@ -5,6 +5,8 @@ config DVB_NGENE select DVB_STV6110x if !DVB_FE_CUSTOMISE select DVB_STV090x if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_DRXK if !DVB_FE_CUSTOMISE + select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE ---help--- Support for Micronas PCI express cards with nGene bridge. diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c index fcf4be9..0564192 100644 --- a/drivers/media/dvb/ngene/ngene-cards.c +++ b/drivers/media/dvb/ngene/ngene-cards.c @@ -40,6 +40,8 @@ #include "lnbh24.h" #include "lgdt330x.h" #include "mt2131.h" +#include "tda18271c2dd.h" +#include "drxk.h" /****************************************************************************/ @@ -83,6 +85,49 @@ static int tuner_attach_stv6110(struct ngene_channel *chan) } +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct ngene_channel *chan = fe->sec_priv; + int status; + + if (enable) { + down(&chan->dev->pll_mutex); + status = chan->gate_ctrl(fe, 1); + } else { + status = chan->gate_ctrl(fe, 0); + up(&chan->dev->pll_mutex); + } + return status; +} + +static int tuner_attach_tda18271(struct ngene_channel *chan) +{ + struct i2c_adapter *i2c; + struct dvb_frontend *fe; + + i2c = &chan->dev->channel[0].i2c_adapter; + if (chan->fe->ops.i2c_gate_ctrl) + chan->fe->ops.i2c_gate_ctrl(chan->fe, 1); + fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60); + if (chan->fe->ops.i2c_gate_ctrl) + chan->fe->ops.i2c_gate_ctrl(chan->fe, 0); + if (!fe) { + printk(KERN_ERR "No TDA18271 found!\n"); + return -ENODEV; + } + + return 0; +} + +static int tuner_attach_probe(struct ngene_channel *chan) +{ + if (chan->demod_type == 0) + return tuner_attach_stv6110(chan); + if (chan->demod_type == 1) + return tuner_attach_tda18271(chan); + return -EINVAL; +} + static int demod_attach_stv0900(struct ngene_channel *chan) { struct i2c_adapter *i2c; @@ -130,6 +175,60 @@ static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock) up(&chan->dev->pll_mutex); } +static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val) +{ + struct i2c_msg msgs[1] = {{.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1 } }; + return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; +} + +static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr, + u16 reg, u8 *val) +{ + u8 msg[2] = {reg>>8, reg&0xff}; + struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, + .buf = msg, .len = 2}, + {.addr = adr, .flags = I2C_M_RD, + .buf = val, .len = 1} }; + return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; +} + +static int port_has_stv0900(struct i2c_adapter *i2c, int port) +{ + u8 val; + if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0) + return 0; + return 1; +} + +static int port_has_drxk(struct i2c_adapter *i2c, int port) +{ + u8 val; + + if (i2c_read(i2c, 0x29+port, &val) < 0) + return 0; + return 1; +} + +static int demod_attach_drxk(struct ngene_channel *chan, + struct i2c_adapter *i2c) +{ + struct drxk_config config; + + memset(&config, 0, sizeof(config)); + config.adr = 0x29 + (chan->number ^ 2); + + chan->fe = dvb_attach(drxk_attach, &config, i2c, &chan->fe2); + if (!chan->fe) { + printk(KERN_ERR "No DRXK found!\n"); + return -ENODEV; + } + chan->fe->sec_priv = chan; + chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl; + chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl; + return 0; +} + static int cineS2_probe(struct ngene_channel *chan) { struct i2c_adapter *i2c; @@ -144,43 +243,42 @@ static int cineS2_probe(struct ngene_channel *chan) else i2c = &chan->dev->channel[1].i2c_adapter; - fe_conf = chan->dev->card_info->fe_config[chan->number]; - i2c_msg.addr = fe_conf->address; - - /* probe demod */ - i2c_msg.len = 2; - buf[0] = 0xf1; - buf[1] = 0x00; - rc = i2c_transfer(i2c, &i2c_msg, 1); - if (rc != 1) - return -ENODEV; - - /* demod found, attach it */ - rc = demod_attach_stv0900(chan); - if (rc < 0 || chan->number < 2) - return rc; - - /* demod #2: reprogram outputs DPN1 & DPN2 */ - i2c_msg.len = 3; - buf[0] = 0xf1; - switch (chan->number) { - case 2: - buf[1] = 0x5c; - buf[2] = 0xc2; - break; - case 3: - buf[1] = 0x61; - buf[2] = 0xcc; - break; - default: + if (port_has_stv0900(i2c, chan->number)) { + chan->demod_type = 0; + fe_conf = chan->dev->card_info->fe_config[chan->number]; + /* demod found, attach it */ + rc = demod_attach_stv0900(chan); + if (rc < 0 || chan->number < 2) + return rc; + + /* demod #2: reprogram outputs DPN1 & DPN2 */ + i2c_msg.addr = fe_conf->address; + i2c_msg.len = 3; + buf[0] = 0xf1; + switch (chan->number) { + case 2: + buf[1] = 0x5c; + buf[2] = 0xc2; + break; + case 3: + buf[1] = 0x61; + buf[2] = 0xcc; + break; + default: + return -ENODEV; + } + rc = i2c_transfer(i2c, &i2c_msg, 1); + if (rc != 1) { + printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n"); + return -EIO; + } + } else if (port_has_drxk(i2c, chan->number^2)) { + chan->demod_type = 1; + demod_attach_drxk(chan, i2c); + } else { + printk(KERN_ERR "No demod found on chan %d\n", chan->number); return -ENODEV; } - rc = i2c_transfer(i2c, &i2c_msg, 1); - if (rc != 1) { - printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n"); - return -EIO; - } - return 0; } @@ -306,7 +404,7 @@ static struct ngene_info ngene_info_satixS2v2 = { .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSOUT}, .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, - .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, .lnb = {0x0a, 0x08, 0x0b, 0x09}, @@ -321,7 +419,7 @@ static struct ngene_info ngene_info_cineS2v5 = { .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSOUT}, .demod_attach = {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe}, - .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110}, + .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe}, .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, .lnb = {0x0a, 0x08, 0x0b, 0x09}, @@ -331,13 +429,13 @@ static struct ngene_info ngene_info_cineS2v5 = { }; -static struct ngene_info ngene_info_duoFlexS2 = { +static struct ngene_info ngene_info_duoFlex = { .type = NGENE_SIDEWINDER, - .name = "Digital Devices DuoFlex S2 miniPCIe", + .name = "Digital Devices DuoFlex PCIe or miniPCIe", .io_type = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSOUT}, .demod_attach = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe}, - .tuner_attach = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110}, + .tuner_attach = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe}, .fe_config = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2}, .tuner_config = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1}, .lnb = {0x0a, 0x08, 0x0b, 0x09}, @@ -385,8 +483,8 @@ static const struct pci_device_id ngene_id_tbl[] __devinitdata = { NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2), NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2), NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5), - NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2), - NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2), + NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex), + NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex), NGENE_ID(0x1461, 0x062e, ngene_info_m780), {0} }; diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c index 6927c72..f129a93 100644 --- a/drivers/media/dvb/ngene/ngene-core.c +++ b/drivers/media/dvb/ngene/ngene-core.c @@ -41,7 +41,7 @@ #include "ngene.h" -static int one_adapter = 1; +static int one_adapter; module_param(one_adapter, int, 0444); MODULE_PARM_DESC(one_adapter, "Use only one adapter."); @@ -461,7 +461,7 @@ static u8 TSFeatureDecoderSetup[8 * 5] = { 0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, 0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXH */ 0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* DRXHser */ - 0x72, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* S2ser */ + 0x72, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* S2ser */ 0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */ }; @@ -507,7 +507,7 @@ void FillTSBuffer(void *Buffer, int Length, u32 Flags) { u32 *ptr = Buffer; - memset(Buffer, 0xff, Length); + memset(Buffer, TS_FILLER, Length); while (Length > 0) { if (Flags & DF_SWAP32) *ptr = 0x471FFF10; @@ -1443,6 +1443,9 @@ static void release_channel(struct ngene_channel *chan) chan->ci_dev = NULL; } + if (chan->fe2) + dvb_unregister_frontend(chan->fe2); + if (chan->fe) { dvb_unregister_frontend(chan->fe); dvb_frontend_detach(chan->fe); @@ -1534,6 +1537,14 @@ static int init_channel(struct ngene_channel *chan) goto err; chan->has_demux = true; } + if (chan->fe2) { + if (dvb_register_frontend(adapter, chan->fe2) < 0) + goto err; + chan->fe2->tuner_priv = chan->fe->tuner_priv; + memcpy(&chan->fe2->ops.tuner_ops, + &chan->fe->ops.tuner_ops, + sizeof(struct dvb_tuner_ops)); + } if (chan->has_demux) { ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux", @@ -1571,11 +1582,18 @@ static int init_channels(struct ngene *dev) return 0; } +static struct cxd2099_cfg cxd_cfg = { + .bitrate = 62000, + .adr = 0x40, + .polarity = 0, + .clock_mode = 0, +}; + static void cxd_attach(struct ngene *dev) { struct ngene_ci *ci = &dev->ci; - ci->en = cxd2099_attach(0x40, dev, &dev->channel[0].i2c_adapter); + ci->en = cxd2099_attach(&cxd_cfg, dev, &dev->channel[0].i2c_adapter); ci->dev = dev; return; } diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c index 0b49432..fcb16a6 100644 --- a/drivers/media/dvb/ngene/ngene-dvb.c +++ b/drivers/media/dvb/ngene/ngene-dvb.c @@ -118,6 +118,16 @@ static void swap_buffer(u32 *p, u32 len) } } +/* start of filler packet */ +static u8 fill_ts[] = { 0x47, 0x1f, 0xff, 0x10, TS_FILLER }; + +/* #define DEBUG_CI_XFER */ +#ifdef DEBUG_CI_XFER +static u32 ok; +static u32 overflow; +static u32 stripped; +#endif + void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags) { struct ngene_channel *chan = priv; @@ -126,21 +136,41 @@ void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags) if (flags & DF_SWAP32) swap_buffer(buf, len); + if (dev->ci.en && chan->number == 2) { - if (dvb_ringbuffer_free(&dev->tsin_rbuf) > len) { - dvb_ringbuffer_write(&dev->tsin_rbuf, buf, len); - wake_up_interruptible(&dev->tsin_rbuf.queue); + while (len >= 188) { + if (memcmp(buf, fill_ts, sizeof fill_ts) != 0) { + if (dvb_ringbuffer_free(&dev->tsin_rbuf) >= 188) { + dvb_ringbuffer_write(&dev->tsin_rbuf, buf, 188); + wake_up(&dev->tsin_rbuf.queue); +#ifdef DEBUG_CI_XFER + ok++; +#endif + } +#ifdef DEBUG_CI_XFER + else + overflow++; +#endif + } +#ifdef DEBUG_CI_XFER + else + stripped++; + + if (ok % 100 == 0 && overflow) + printk(KERN_WARNING "%s: ok %u overflow %u dropped %u\n", __func__, ok, overflow, stripped); +#endif + buf += 188; + len -= 188; } - return 0; + return NULL; } - if (chan->users > 0) { + + if (chan->users > 0) dvb_dmx_swfilter(&chan->demux, buf, len); - } + return NULL; } -u8 fill_ts[188] = { 0x47, 0x1f, 0xff, 0x10 }; - void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags) { struct ngene_channel *chan = priv; diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h index 40fce9e..5443dc0 100644 --- a/drivers/media/dvb/ngene/ngene.h +++ b/drivers/media/dvb/ngene/ngene.h @@ -641,8 +641,11 @@ struct ngene_channel { int mode; bool has_adapter; bool has_demux; + int demod_type; + int (*gate_ctrl)(struct dvb_frontend *, int); struct dvb_frontend *fe; + struct dvb_frontend *fe2; struct dmxdev dmxdev; struct dvb_demux demux; struct dvb_net dvbnet; @@ -786,6 +789,8 @@ struct ngene { u8 uart_rbuf[UART_RBUF_LEN]; int uart_rp, uart_wp; +#define TS_FILLER 0x6f + u8 *tsout_buf; #define TSOUT_BUF_SIZE (512*188*8) struct dvb_ringbuffer tsout_rbuf; @@ -852,7 +857,7 @@ struct ngene_info { }; #ifdef NGENE_V4L -struct ngene_format{ +struct ngene_format { char *name; int fourcc; /* video4linux 2 */ int btformat; /* BT848_COLOR_FMT_* */ diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index 78765ed..7331e84 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1147,7 +1147,7 @@ static int smscore_validate_client(struct smscore_device_t *coredev, if (!client) { sms_err("bad parameter."); - return -EFAULT; + return -EINVAL; } registered_client = smscore_find_client(coredev, data_type, id); if (registered_client == client) diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h index 8ecadec..c592ae0 100644 --- a/drivers/media/dvb/siano/smscoreapi.h +++ b/drivers/media/dvb/siano/smscoreapi.h @@ -22,7 +22,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef __SMS_CORE_API_H__ #define __SMS_CORE_API_H__ -#include <linux/version.h> #include <linux/device.h> #include <linux/list.h> #include <linux/mm.h> diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 3d8cc42..25e58cb 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -102,10 +102,7 @@ /* * Version Information */ -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ - -#define DRIVER_VERSION "v0.46" -#define RADIO_VERSION KERNEL_VERSION(0, 4, 6) +#define DRIVER_VERSION "0.4.7" #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>" #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver" @@ -335,7 +332,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "dsbr100", sizeof(v->driver)); strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card)); usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER; return 0; } @@ -647,3 +643,4 @@ module_exit (dsbr100_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 4ce10db..1c3f844 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -33,7 +33,6 @@ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* msleep */ #include <linux/videodev2.h> /* kernel radio structs */ -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -41,6 +40,7 @@ MODULE_AUTHOR("M.Kirkwood"); MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); #ifndef CONFIG_RADIO_RTRACK_PORT #define CONFIG_RADIO_RTRACK_PORT -1 @@ -53,8 +53,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct rtrack { struct v4l2_device v4l2_dev; @@ -223,7 +221,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-aimslab", sizeof(v->driver)); strlcpy(v->card, "RadioTrack", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index dd8a6ab..eed7b08 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -30,7 +30,6 @@ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -38,6 +37,7 @@ MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Aztech radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ @@ -53,8 +53,6 @@ module_param(io, int, 0); module_param(radio_nr, int, 0); MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)"); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct aztech { struct v4l2_device v4l2_dev; @@ -188,7 +186,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-aztech", sizeof(v->driver)); strlcpy(v->card, "Aztech Radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index bc9ad08..16a089f 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -30,7 +30,6 @@ * Changed API to V4L2 */ -#include <linux/version.h> #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ @@ -46,6 +45,7 @@ MODULE_AUTHOR("Fred Gleason, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the ADS Cadet AM/FM/RDS radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.3.4"); static int io = -1; /* default to isapnp activation */ static int radio_nr = -1; @@ -54,8 +54,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)"); module_param(radio_nr, int, 0); -#define CADET_VERSION KERNEL_VERSION(0, 3, 3) - #define RDS_BUFFER 256 #define RDS_RX_FLAG 1 #define MBS_RX_FLAG 2 @@ -361,7 +359,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "ADS Cadet", sizeof(v->driver)); strlcpy(v->card, "ADS Cadet", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = CADET_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_READWRITE | V4L2_CAP_RDS_CAPTURE; return 0; diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 2599364..edadc84 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -21,21 +21,19 @@ #include <linux/ioport.h> /* request_region */ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/mutex.h> #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> -#define RADIO_VERSION KERNEL_VERSION(0, 0, 3) - /* * Module info. */ -MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); +MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>"); MODULE_DESCRIPTION("A driver for the GemTek Radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.4"); /* * Module params. @@ -387,7 +385,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-gemtek", sizeof(v->driver)); strlcpy(v->card, "GemTek", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index e83e840..f872a54 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -40,15 +40,18 @@ #include <linux/mutex.h> #include <linux/pci.h> #include <linux/videodev2.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> #include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#define DRIVER_VERSION "0.7.8" + + MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net"); MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio."); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); static int radio_nr = -1; module_param(radio_nr, int, 0); @@ -58,10 +61,6 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "activates debug info"); -#define DRIVER_VERSION "0.77" - -#define RADIO_VERSION KERNEL_VERSION(0, 7, 7) - #define dprintk(dev, num, fmt, arg...) \ v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg) @@ -195,7 +194,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver)); strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card)); snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index b3a635b..1742bd8 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -63,18 +63,17 @@ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <linux/usb.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/mutex.h> /* driver and module definitions */ #define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>" #define DRIVER_DESC "AverMedia MR 800 USB FM radio driver" -#define DRIVER_VERSION "0.11" -#define RADIO_VERSION KERNEL_VERSION(0, 1, 1) +#define DRIVER_VERSION "0.1.2" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); #define USB_AMRADIO_VENDOR 0x07ca #define USB_AMRADIO_PRODUCT 0xb800 @@ -301,7 +300,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-mr800", sizeof(v->driver)); strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card)); usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER; return 0; } diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index 8d6ea59..3628be6 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -15,7 +15,6 @@ #include <linux/delay.h> /* udelay */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -23,6 +22,7 @@ MODULE_AUTHOR("Ben Pfaff"); MODULE_DESCRIPTION("A driver for the RadioTrack II radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); #ifndef CONFIG_RADIO_RTRACK2_PORT #define CONFIG_RADIO_RTRACK2_PORT -1 @@ -35,8 +35,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20c or 0x30c)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct rtrack2 { struct v4l2_device v4l2_dev; @@ -121,7 +119,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-rtrack2", sizeof(v->driver)); strlcpy(v->card, "RadioTrack II", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index b5a5f89..22c5743 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -16,7 +16,6 @@ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> */ -#include <linux/version.h> #include <linux/kernel.h> /* __setup */ #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ @@ -32,6 +31,7 @@ MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood"); MODULE_DESCRIPTION("A driver for the SF16-FMI and SF16-FMP radio."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); static int io = -1; static int radio_nr = -1; @@ -40,8 +40,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the SF16-FMI or SF16-FMP card (0x284 or 0x384)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct fmi { struct v4l2_device v4l2_dev; @@ -134,7 +132,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver)); strlcpy(v->card, "SF16-FMx radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index 87bad76..2dd4859 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -1,441 +1,209 @@ -/* SF16FMR2 radio driver for Linux radio support - * heavily based on fmi driver... - * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com +/* SF16-FMR2 radio driver for Linux + * Copyright (c) 2011 Ondrej Zary * - * Notes on the hardware - * - * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); - * No volume control - only mute/unmute - you have to use line volume - * - * For read stereo/mono you must wait 0.1 sec after set frequency and - * card unmuted so I set frequency on unmute - * Signal handling seem to work only on autoscanning (not implemented) - * - * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> + * Original driver was (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com + * but almost nothing remained here after conversion to generic TEA575x + * implementation */ +#include <linux/delay.h> #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ -#include <linux/delay.h> /* udelay */ -#include <linux/videodev2.h> /* kernel radio structs */ -#include <linux/mutex.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ -#include <media/v4l2-device.h> -#include <media/v4l2-ioctl.h> +#include <sound/tea575x-tuner.h> -MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com"); -MODULE_DESCRIPTION("A driver for the SF16FMR2 radio."); +MODULE_AUTHOR("Ondrej Zary"); +MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver"); MODULE_LICENSE("GPL"); -static int io = 0x384; -static int radio_nr = -1; - -module_param(io, int, 0); -MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)"); -module_param(radio_nr, int, 0); - -#define RADIO_VERSION KERNEL_VERSION(0,0,2) - -#define AUD_VOL_INDEX 1 - -#undef DEBUG -//#define DEBUG 1 - -#ifdef DEBUG -# define debug_print(s) printk s -#else -# define debug_print(s) -#endif - -/* this should be static vars for module size */ -struct fmr2 -{ - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct mutex lock; +struct fmr2 { int io; - int curvol; /* 0-15 */ - int mute; - int stereo; /* card is producing stereo audio */ - unsigned long curfreq; /* freq in kHz */ - int card_type; + struct snd_tea575x tea; + struct v4l2_ctrl *volume; + struct v4l2_ctrl *balance; }; +/* the port is hardwired so no need to support multiple cards */ +#define FMR2_PORT 0x384 static struct fmr2 fmr2_card; -/* hw precision is 12.5 kHz - * It is only useful to give freq in interval of 200 (=0.0125Mhz), - * other bits will be truncated - */ -#define RSF16_ENCODE(x) ((x) / 200 + 856) -#define RSF16_MINFREQ (87 * 16000) -#define RSF16_MAXFREQ (108 * 16000) - -static inline void wait(int n, int io) -{ - for (; n; --n) - inb(io); -} - -static void outbits(int bits, unsigned int data, int nWait, int io) -{ - int bit; - - for (; --bits >= 0;) { - bit = (data >> bits) & 1; - outb(bit, io); - wait(nWait, io); - outb(bit | 2, io); - wait(nWait, io); - outb(bit, io); - wait(nWait, io); - } -} - -static inline void fmr2_mute(int io) -{ - outb(0x00, io); - wait(4, io); -} - -static inline void fmr2_unmute(int io) -{ - outb(0x04, io); - wait(4, io); -} - -static inline int fmr2_stereo_mode(int io) -{ - int n = inb(io); - - outb(6, io); - inb(io); - n = ((n >> 3) & 1) ^ 1; - debug_print((KERN_DEBUG "stereo: %d\n", n)); - return n; -} - -static int fmr2_product_info(struct fmr2 *dev) -{ - int n = inb(dev->io); - - n &= 0xC1; - if (n == 0) { - /* this should support volume set */ - dev->card_type = 12; - return 0; - } - /* not volume (mine is 11) */ - dev->card_type = (n == 128) ? 11 : 0; - return n; -} +/* TEA575x tuner pins */ +#define STR_DATA (1 << 0) +#define STR_CLK (1 << 1) +#define STR_WREN (1 << 2) +#define STR_MOST (1 << 3) +/* PT2254A/TC9154A volume control pins */ +#define PT_ST (1 << 4) +#define PT_CK (1 << 5) +#define PT_DATA (1 << 6) +/* volume control presence pin */ +#define FMR2_HASVOL (1 << 7) -static inline int fmr2_getsigstr(struct fmr2 *dev) +static void fmr2_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) { - /* !!! works only if scanning freq */ - int res = 0xffff; - - outb(5, dev->io); - wait(4, dev->io); - if (!(inb(dev->io) & 1)) - res = 0; - debug_print((KERN_DEBUG "signal: %d\n", res)); - return res; -} - -/* set frequency and unmute card */ -static int fmr2_setfreq(struct fmr2 *dev) -{ - unsigned long freq = dev->curfreq; - - fmr2_mute(dev->io); - - /* 0x42 for mono output - * 0x102 forward scanning - * 0x182 scansione avanti - */ - outbits(9, 0x2, 3, dev->io); - outbits(16, RSF16_ENCODE(freq), 2, dev->io); - - fmr2_unmute(dev->io); + struct fmr2 *fmr2 = tea->private_data; + u8 bits = 0; - /* wait 0.11 sec */ - msleep(110); + bits |= (pins & TEA575X_DATA) ? STR_DATA : 0; + bits |= (pins & TEA575X_CLK) ? STR_CLK : 0; + /* WRITE_ENABLE is inverted, DATA must be high during read */ + bits |= (pins & TEA575X_WREN) ? 0 : STR_WREN | STR_DATA; - /* NOTE if mute this stop radio - you must set freq on unmute */ - dev->stereo = fmr2_stereo_mode(dev->io); - return 0; -} - -/* !!! not tested, in my card this doesn't work !!! */ -static int fmr2_setvolume(struct fmr2 *dev) -{ - int vol[16] = { 0x021, 0x084, 0x090, 0x104, - 0x110, 0x204, 0x210, 0x402, - 0x404, 0x408, 0x410, 0x801, - 0x802, 0x804, 0x808, 0x810 }; - int i, a; - int n = vol[dev->curvol & 0x0f]; - - if (dev->card_type != 11) - return 1; - - for (i = 12; --i >= 0; ) { - a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */ - outb(a | 4, dev->io); - wait(4, dev->io); - outb(a | 0x24, dev->io); - wait(4, dev->io); - outb(a | 4, dev->io); - wait(4, dev->io); - } - for (i = 6; --i >= 0; ) { - a = ((0x18 >> i) & 1) << 6; - outb(a | 4, dev->io); - wait(4, dev->io); - outb(a | 0x24, dev->io); - wait(4, dev->io); - outb(a | 4, dev->io); - wait(4, dev->io); - } - wait(4, dev->io); - outb(0x14, dev->io); - return 0; + outb(bits, fmr2->io); } -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) +static u8 fmr2_tea575x_get_pins(struct snd_tea575x *tea) { - strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver)); - strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card)); - strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct fmr2 *fmr2 = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; + struct fmr2 *fmr2 = tea->private_data; + u8 bits = inb(fmr2->io); - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - - v->rangelow = RSF16_MINFREQ; - v->rangehigh = RSF16_MAXFREQ; - v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO : - V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_STEREO; - mutex_lock(&fmr2->lock); - v->signal = fmr2_getsigstr(fmr2); - mutex_unlock(&fmr2->lock); - return 0; + return (bits & STR_DATA) ? TEA575X_DATA : 0 | + (bits & STR_MOST) ? TEA575X_MOST : 0; } -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) +static void fmr2_tea575x_set_direction(struct snd_tea575x *tea, bool output) { - return v->index ? -EINVAL : 0; } -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct fmr2 *fmr2 = video_drvdata(file); +static struct snd_tea575x_ops fmr2_tea_ops = { + .set_pins = fmr2_tea575x_set_pins, + .get_pins = fmr2_tea575x_get_pins, + .set_direction = fmr2_tea575x_set_direction, +}; - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (f->frequency < RSF16_MINFREQ || - f->frequency > RSF16_MAXFREQ) - return -EINVAL; - /* rounding in steps of 200 to match the freq - that will be used */ - fmr2->curfreq = (f->frequency / 200) * 200; - - /* set card freq (if not muted) */ - if (fmr2->curvol && !fmr2->mute) { - mutex_lock(&fmr2->lock); - fmr2_setfreq(fmr2); - mutex_unlock(&fmr2->lock); +/* TC9154A/PT2254A volume control */ + +/* 18-bit shift register bit definitions */ +#define TC9154A_ATT_MAJ_0DB (1 << 0) +#define TC9154A_ATT_MAJ_10DB (1 << 1) +#define TC9154A_ATT_MAJ_20DB (1 << 2) +#define TC9154A_ATT_MAJ_30DB (1 << 3) +#define TC9154A_ATT_MAJ_40DB (1 << 4) +#define TC9154A_ATT_MAJ_50DB (1 << 5) +#define TC9154A_ATT_MAJ_60DB (1 << 6) + +#define TC9154A_ATT_MIN_0DB (1 << 7) +#define TC9154A_ATT_MIN_2DB (1 << 8) +#define TC9154A_ATT_MIN_4DB (1 << 9) +#define TC9154A_ATT_MIN_6DB (1 << 10) +#define TC9154A_ATT_MIN_8DB (1 << 11) +/* bit 12 is ignored */ +#define TC9154A_CHANNEL_LEFT (1 << 13) +#define TC9154A_CHANNEL_RIGHT (1 << 14) +/* bits 15, 16, 17 must be 0 */ + +#define TC9154A_ATT_MAJ(x) (1 << x) +#define TC9154A_ATT_MIN(x) (1 << (7 + x)) + +static void tc9154a_set_pins(struct fmr2 *fmr2, u8 pins) +{ + if (!fmr2->tea.mute) + pins |= STR_WREN; + + outb(pins, fmr2->io); +} + +static void tc9154a_set_attenuation(struct fmr2 *fmr2, int att, u32 channel) +{ + int i; + u32 reg; + u8 bit; + + reg = TC9154A_ATT_MAJ(att / 10) | TC9154A_ATT_MIN((att % 10) / 2); + reg |= channel; + /* write 18-bit shift register, LSB first */ + for (i = 0; i < 18; i++) { + bit = reg & (1 << i) ? PT_DATA : 0; + tc9154a_set_pins(fmr2, bit); + udelay(5); + tc9154a_set_pins(fmr2, bit | PT_CK); + udelay(5); + tc9154a_set_pins(fmr2, bit); } - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct fmr2 *fmr2 = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = fmr2->curfreq; - return 0; -} -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - struct fmr2 *fmr2 = video_drvdata(file); - - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - /* Only card_type == 11 implements volume */ - if (fmr2->card_type == 11) - return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0); - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0); - } - return -EINVAL; + /* latch register data */ + udelay(5); + tc9154a_set_pins(fmr2, PT_ST); + udelay(5); + tc9154a_set_pins(fmr2, 0); } -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) +static int fmr2_s_ctrl(struct v4l2_ctrl *ctrl) { - struct fmr2 *fmr2 = video_drvdata(file); + struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler); + struct fmr2 *fmr2 = tea->private_data; + int volume, balance, left, right; switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = fmr2->mute; - return 0; case V4L2_CID_AUDIO_VOLUME: - ctrl->value = fmr2->curvol; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct fmr2 *fmr2 = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - fmr2->mute = ctrl->value; + volume = ctrl->val; + balance = fmr2->balance->cur.val; break; - case V4L2_CID_AUDIO_VOLUME: - fmr2->curvol = ctrl->value; + case V4L2_CID_AUDIO_BALANCE: + balance = ctrl->val; + volume = fmr2->volume->cur.val; break; default: return -EINVAL; } -#ifdef DEBUG - if (fmr2->curvol && !fmr2->mute) - printk(KERN_DEBUG "unmute\n"); - else - printk(KERN_DEBUG "mute\n"); -#endif - - mutex_lock(&fmr2->lock); - if (fmr2->curvol && !fmr2->mute) { - fmr2_setvolume(fmr2); - /* Set frequency and unmute card */ - fmr2_setfreq(fmr2); - } else - fmr2_mute(fmr2->io); - mutex_unlock(&fmr2->lock); - return 0; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} + left = right = volume; + if (balance < 0) + right = max(0, right + balance); + if (balance > 0) + left = max(0, left - balance); -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} + tc9154a_set_attenuation(fmr2, abs(left - 68), TC9154A_CHANNEL_LEFT); + tc9154a_set_attenuation(fmr2, abs(right - 68), TC9154A_CHANNEL_RIGHT); -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; return 0; } -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) +static const struct v4l2_ctrl_ops fmr2_ctrl_ops = { + .s_ctrl = fmr2_s_ctrl, +}; + +static int fmr2_tea_ext_init(struct snd_tea575x *tea) { - return a->index ? -EINVAL : 0; -} + struct fmr2 *fmr2 = tea->private_data; -static const struct v4l2_file_operations fmr2_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, -}; + if (inb(fmr2->io) & FMR2_HASVOL) { + fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56); + fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0); + if (tea->ctrl_handler.error) { + printk(KERN_ERR "radio-sf16fmr2: can't initialize contrls\n"); + return tea->ctrl_handler.error; + } + } -static const struct v4l2_ioctl_ops fmr2_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, -}; + return 0; +} static int __init fmr2_init(void) { struct fmr2 *fmr2 = &fmr2_card; - struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev; - int res; - strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name)); - fmr2->io = io; - fmr2->stereo = 1; - mutex_init(&fmr2->lock); + fmr2->io = FMR2_PORT; - if (!request_region(fmr2->io, 2, "sf16fmr2")) { - v4l2_err(v4l2_dev, "request_region failed!\n"); + if (!request_region(fmr2->io, 2, "SF16-FMR2")) { + printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io); return -EBUSY; } - res = v4l2_device_register(NULL, v4l2_dev); - if (res < 0) { - release_region(fmr2->io, 2); - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - return res; - } + fmr2->tea.private_data = fmr2; + fmr2->tea.ops = &fmr2_tea_ops; + fmr2->tea.ext_init = fmr2_tea_ext_init; + strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card)); + strcpy(fmr2->tea.bus_info, "ISA"); - strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name)); - fmr2->vdev.v4l2_dev = v4l2_dev; - fmr2->vdev.fops = &fmr2_fops; - fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops; - fmr2->vdev.release = video_device_release_empty; - video_set_drvdata(&fmr2->vdev, fmr2); - - /* mute card - prevents noisy bootups */ - fmr2_mute(fmr2->io); - fmr2_product_info(fmr2); - - if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { - v4l2_device_unregister(v4l2_dev); + if (snd_tea575x_init(&fmr2->tea)) { + printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n"); release_region(fmr2->io, 2); - return -EINVAL; + return -ENODEV; } - v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io); - debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type)); + printk(KERN_INFO "radio-sf16fmr2: SF16-FMR2 radio card at 0x%x.\n", fmr2->io); return 0; } @@ -443,22 +211,9 @@ static void __exit fmr2_exit(void) { struct fmr2 *fmr2 = &fmr2_card; - video_unregister_device(&fmr2->vdev); - v4l2_device_unregister(&fmr2->v4l2_dev); + snd_tea575x_exit(&fmr2->tea); release_region(fmr2->io, 2); } module_init(fmr2_init); module_exit(fmr2_exit); - -#ifndef MODULE - -static int __init fmr2_setup_io(char *str) -{ - get_option(&str, &io); - return 1; -} - -__setup("sf16fmr2=", fmr2_setup_io); - -#endif diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c index 0e71d81..95ddcc4 100644 --- a/drivers/media/radio/radio-tea5764.c +++ b/drivers/media/radio/radio-tea5764.c @@ -39,10 +39,8 @@ #include <linux/i2c.h> /* I2C */ #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ -#define DRIVER_VERSION "v0.01" -#define RADIO_VERSION KERNEL_VERSION(0, 0, 1) +#define DRIVER_VERSION "0.0.2" #define DRIVER_AUTHOR "Fabio Belavenuto <belavenuto@gmail.com>" #define DRIVER_DESC "A driver for the TEA5764 radio chip for EZX Phones." @@ -300,7 +298,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->card, dev->name, sizeof(v->card)); snprintf(v->bus_info, sizeof(v->bus_info), "I2C:%s", dev_name(&dev->dev)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } @@ -595,8 +592,9 @@ static void __exit tea5764_exit(void) MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); -module_param(use_xtal, int, 1); +module_param(use_xtal, int, 0); MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board"); module_param(radio_nr, int, 0); MODULE_PARM_DESC(radio_nr, "video4linux device number to use"); diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index a326639..f2ed9cc 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -29,7 +29,6 @@ #include <linux/ioport.h> /* request_region */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -37,6 +36,7 @@ MODULE_AUTHOR("R.OFFERMANNS & others"); MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); #ifndef CONFIG_RADIO_TERRATEC_PORT #define CONFIG_RADIO_TERRATEC_PORT 0x590 @@ -49,8 +49,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the TerraTec ActiveRadio card (0x590 or 0x591)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - static struct v4l2_queryctrl radio_qctrl[] = { { .id = V4L2_CID_AUDIO_MUTE, @@ -205,7 +203,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-terratec", sizeof(v->driver)); strlcpy(v->card, "ActiveRadio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c index a185610..f17b540 100644 --- a/drivers/media/radio/radio-timb.c +++ b/drivers/media/radio/radio-timb.c @@ -16,7 +16,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> #include <linux/io.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> @@ -44,7 +43,6 @@ static int timbradio_vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, DRIVER_NAME, sizeof(v->driver)); strlcpy(v->card, "Timberdale Radio", sizeof(v->card)); snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME); - v->version = KERNEL_VERSION(0, 0, 1); v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } @@ -245,4 +243,5 @@ module_exit(timbradio_exit); MODULE_DESCRIPTION("Timberdale Radio driver"); MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.0.2"); MODULE_ALIAS("platform:"DRIVER_NAME); diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index 22fa9cc..b3f45a0 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/videodev2.h> #include <linux/io.h> #include <media/v4l2-device.h> @@ -28,6 +27,7 @@ MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath"); MODULE_DESCRIPTION("A driver for the Trust FM Radio card."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */ @@ -42,8 +42,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct trust { struct v4l2_device v4l2_dev; struct video_device vdev; @@ -196,7 +194,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-trust", sizeof(v->driver)); strlcpy(v->card, "Trust FM Radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 8dbbf08f..398726a 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -31,15 +31,17 @@ #include <linux/module.h> /* Modules */ #include <linux/init.h> /* Initdata */ #include <linux/ioport.h> /* request_region */ -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> +#define DRIVER_VERSION "0.1.2" + MODULE_AUTHOR("Dr. Henrik Seidel"); MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio)."); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); #ifndef CONFIG_RADIO_TYPHOON_PORT #define CONFIG_RADIO_TYPHOON_PORT -1 @@ -61,9 +63,7 @@ static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ; module_param(mutefreq, ulong, 0); MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)"); -#define RADIO_VERSION KERNEL_VERSION(0, 1, 1) - -#define BANNER "Typhoon Radio Card driver v0.1.1\n" +#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n" struct typhoon { struct v4l2_device v4l2_dev; @@ -171,7 +171,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-typhoon", sizeof(v->driver)); strlcpy(v->card, "Typhoon Radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index 459f727..46cacf8 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -1382,7 +1382,7 @@ static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_TUNE_ANTENNA_CAPACITOR: - ctrl->cur.val = wl1273_fm_get_tx_ctune(radio); + ctrl->val = wl1273_fm_get_tx_ctune(radio); break; default: diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index af99c5b..f5613b9 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -35,7 +35,6 @@ #include <linux/delay.h> /* udelay, msleep */ #include <linux/videodev2.h> /* kernel radio structs */ #include <linux/mutex.h> -#include <linux/version.h> /* for KERNEL_VERSION MACRO */ #include <linux/io.h> /* outb, outb_p */ #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -43,6 +42,7 @@ MODULE_AUTHOR("C.van Schaik"); MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus."); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); #ifndef CONFIG_RADIO_ZOLTRIX_PORT #define CONFIG_RADIO_ZOLTRIX_PORT -1 @@ -55,8 +55,6 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)"); module_param(radio_nr, int, 0); -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - struct zoltrix { struct v4l2_device v4l2_dev; struct video_device vdev; @@ -228,7 +226,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "radio-zoltrix", sizeof(v->driver)); strlcpy(v->card, "Zoltrix Radio", sizeof(v->card)); strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); - v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index a2a6777..fd3541b 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -24,10 +24,9 @@ /* driver definitions */ #define DRIVER_AUTHOR "Joonyoung Shim <jy0922.shim@samsung.com>"; -#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 1) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers" -#define DRIVER_VERSION "1.0.1" +#define DRIVER_VERSION "1.0.2" /* kernel includes */ #include <linux/i2c.h> @@ -248,7 +247,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv, { strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver)); strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); - capability->version = DRIVER_KERNEL_VERSION; capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER | V4L2_CAP_RADIO; diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c index 392e84f..4cf5370 100644 --- a/drivers/media/radio/si470x/radio-si470x-usb.c +++ b/drivers/media/radio/si470x/radio-si470x-usb.c @@ -29,7 +29,6 @@ /* driver definitions */ #define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>" -#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 10) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" #define DRIVER_VERSION "1.0.10" @@ -626,7 +625,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv, strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); usb_make_path(radio->usbdev, capability->bus_info, sizeof(capability->bus_info)); - capability->version = DRIVER_KERNEL_VERSION; capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE; @@ -699,7 +697,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, radio->videodev = video_device_alloc(); if (!radio->videodev) { retval = -ENOMEM; - goto err_intbuffer; + goto err_urb; } memcpy(radio->videodev, &si470x_viddev_template, sizeof(si470x_viddev_template)); @@ -790,6 +788,8 @@ err_all: kfree(radio->buffer); err_video: video_device_release(radio->videodev); +err_urb: + usb_free_urb(radio->int_in_urb); err_intbuffer: kfree(radio->int_in_buffer); err_radio: diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h index 68da001..f300a55 100644 --- a/drivers/media/radio/si470x/radio-si470x.h +++ b/drivers/media/radio/si470x/radio-si470x.h @@ -32,7 +32,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/input.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/mutex.h> #include <media/v4l2-common.h> diff --git a/drivers/media/radio/wl128x/fmdrv.h b/drivers/media/radio/wl128x/fmdrv.h index 1a45a5d..d84ad9d 100644 --- a/drivers/media/radio/wl128x/fmdrv.h +++ b/drivers/media/radio/wl128x/fmdrv.h @@ -28,14 +28,11 @@ #include <sound/core.h> #include <sound/initval.h> #include <linux/timer.h> -#include <linux/version.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> -#define FM_DRV_VERSION "0.10" -/* Should match with FM_DRV_VERSION */ -#define FM_DRV_RADIO_VERSION KERNEL_VERSION(0, 0, 1) +#define FM_DRV_VERSION "0.1.1" #define FM_DRV_NAME "ti_fmdrv" #define FM_DRV_CARD_SHORT_NAME "TI FM Radio" #define FM_DRV_CARD_LONG_NAME "Texas Instruments FM Radio" diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c index 8701072..8c0e192 100644 --- a/drivers/media/radio/wl128x/fmdrv_v4l2.c +++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c @@ -175,7 +175,6 @@ static int fm_v4l2_vidioc_querycap(struct file *file, void *priv, strlcpy(capability->card, FM_DRV_CARD_SHORT_NAME, sizeof(capability->card)); sprintf(capability->bus_info, "UART"); - capability->version = FM_DRV_RADIO_VERSION; capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_MODULATOR | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | @@ -191,7 +190,7 @@ static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_TUNE_ANTENNA_CAPACITOR: - ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev); + ctrl->val = fm_tx_get_tune_cap_val(fmdev); break; default: fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id); diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 7d4bbc2..899f783 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -87,6 +87,17 @@ config IR_RC5_SZ_DECODER uses an IR protocol that is almost standard RC-5, but not quite, as it uses an additional bit). +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + config IR_LIRC_CODEC tristate "Enable IR to LIRC bridge" depends on RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 52830e5..f224db0 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o +obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o # stand-alone IR receivers/transmitters diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index a43ed6c..2b9c2569 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -953,13 +953,13 @@ static void ene_set_idle(struct rc_dev *rdev, bool idle) } /* outside interface: transmit */ -static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n) +static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n) { struct ene_device *dev = rdev->priv; unsigned long flags; dev->tx_buffer = buf; - dev->tx_len = n / sizeof(int); + dev->tx_len = n; dev->tx_pos = 0; dev->tx_reg = 0; dev->tx_done = 0; diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h index 337a41d..017c209 100644 --- a/drivers/media/rc/ene_ir.h +++ b/drivers/media/rc/ene_ir.h @@ -235,7 +235,7 @@ struct ene_device { bool tx_sample_pulse; /* current sample is pulse */ /* TX buffer */ - int *tx_buffer; /* input samples buffer*/ + unsigned *tx_buffer; /* input samples buffer*/ int tx_pos; /* position in that bufer */ int tx_len; /* current len of tx buffer */ int tx_done; /* done transmitting */ diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c index 1c5cc65..e5eeec4 100644 --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -103,19 +103,19 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf, { struct lirc_codec *lirc; struct rc_dev *dev; - int *txbuf; /* buffer with values to transmit */ - int ret = 0; + unsigned int *txbuf; /* buffer with values to transmit */ + ssize_t ret = 0; size_t count; lirc = lirc_get_pdata(file); if (!lirc) return -EFAULT; - if (n % sizeof(int)) + if (n < sizeof(unsigned) || n % sizeof(unsigned)) return -EINVAL; - count = n / sizeof(int); - if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0) + count = n / sizeof(unsigned); + if (count > LIRCBUF_SIZE || count % 2 == 0) return -EINVAL; txbuf = memdup_user(buf, n); @@ -129,7 +129,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf, } if (dev->tx_ir) - ret = dev->tx_ir(dev, txbuf, (u32)n); + ret = dev->tx_ir(dev, txbuf, count); + + if (ret > 0) + ret *= sizeof(unsigned); out: kfree(txbuf); diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c new file mode 100644 index 0000000..3784ebf --- /dev/null +++ b/drivers/media/rc/ir-mce_kbd-decoder.c @@ -0,0 +1,449 @@ +/* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol + * used by the Microsoft Remote Keyboard for Windows Media Center Edition, + * referred to by Microsoft's Windows Media Center remote specification docs + * as "an internal protocol called MCIR-2". + * + * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/module.h> + +#include "rc-core-priv.h" + +/* + * This decoder currently supports: + * - MCIR-2 29-bit IR signals used for mouse movement and buttons + * - MCIR-2 32-bit IR signals used for standard keyboard keys + * + * The media keys on the keyboard send RC-6 signals that are inditinguishable + * from the keys of the same name on the stock MCE remote, and will be handled + * by the standard RC-6 decoder, and be made available to the system via the + * input device for the remote, rather than the keyboard/mouse one. + */ + +#define MCIR2_UNIT 333333 /* ns */ +#define MCIR2_HEADER_NBITS 5 +#define MCIR2_MOUSE_NBITS 29 +#define MCIR2_KEYBOARD_NBITS 32 +#define MCIR2_PREFIX_PULSE (8 * MCIR2_UNIT) +#define MCIR2_PREFIX_SPACE (1 * MCIR2_UNIT) +#define MCIR2_MAX_LEN (3 * MCIR2_UNIT) +#define MCIR2_BIT_START (1 * MCIR2_UNIT) +#define MCIR2_BIT_END (1 * MCIR2_UNIT) +#define MCIR2_BIT_0 (1 * MCIR2_UNIT) +#define MCIR2_BIT_SET (2 * MCIR2_UNIT) +#define MCIR2_MODE_MASK 0xf /* for the header bits */ +#define MCIR2_KEYBOARD_HEADER 0x4 +#define MCIR2_MOUSE_HEADER 0x1 +#define MCIR2_MASK_KEYS_START 0xe0 + +enum mce_kbd_mode { + MCIR2_MODE_KEYBOARD, + MCIR2_MODE_MOUSE, + MCIR2_MODE_UNKNOWN, +}; + +enum mce_kbd_state { + STATE_INACTIVE, + STATE_HEADER_BIT_START, + STATE_HEADER_BIT_END, + STATE_BODY_BIT_START, + STATE_BODY_BIT_END, + STATE_FINISHED, +}; + +static unsigned char kbd_keycodes[256] = { + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, + KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, + KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, + KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, + KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, + KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, + KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, + KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, + KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, + KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, + KEY_RESERVED, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, + KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, + KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, + KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, + KEY_SYSRQ, KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, + KEY_PAGEUP, KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, + KEY_LEFT, KEY_DOWN, KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, + KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, + KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, + KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, + KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, + KEY_F14, KEY_F15, KEY_F16, KEY_F17, KEY_F18, + KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23, + KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, + KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, + KEY_PASTE, KEY_FIND, KEY_MUTE, KEY_VOLUMEUP, KEY_VOLUMEDOWN, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, + KEY_RO, KEY_KATAKANAHIRAGANA, KEY_YEN, KEY_HENKAN, KEY_MUHENKAN, + KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_HANGUEL, + KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, + KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, + KEY_RIGHTALT, KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, + KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, + KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, + KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_COFFEE, + KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED +}; + +static void mce_kbd_rx_timeout(unsigned long data) +{ + struct mce_kbd_dec *mce_kbd = (struct mce_kbd_dec *)data; + int i; + unsigned char maskcode; + + IR_dprintk(2, "timer callback clearing all keys\n"); + + for (i = 0; i < 7; i++) { + maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; + input_report_key(mce_kbd->idev, maskcode, 0); + } + + for (i = 0; i < MCIR2_MASK_KEYS_START; i++) + input_report_key(mce_kbd->idev, kbd_keycodes[i], 0); +} + +static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data) +{ + switch (data->header & MCIR2_MODE_MASK) { + case MCIR2_KEYBOARD_HEADER: + return MCIR2_MODE_KEYBOARD; + case MCIR2_MOUSE_HEADER: + return MCIR2_MODE_MOUSE; + default: + return MCIR2_MODE_UNKNOWN; + } +} + +static void ir_mce_kbd_process_keyboard_data(struct input_dev *idev, + u32 scancode) +{ + u8 keydata = (scancode >> 8) & 0xff; + u8 shiftmask = scancode & 0xff; + unsigned char keycode, maskcode; + int i, keystate; + + IR_dprintk(1, "keyboard: keydata = 0x%02x, shiftmask = 0x%02x\n", + keydata, shiftmask); + + for (i = 0; i < 7; i++) { + maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i]; + if (shiftmask & (1 << i)) + keystate = 1; + else + keystate = 0; + input_report_key(idev, maskcode, keystate); + } + + if (keydata) { + keycode = kbd_keycodes[keydata]; + input_report_key(idev, keycode, 1); + } else { + for (i = 0; i < MCIR2_MASK_KEYS_START; i++) + input_report_key(idev, kbd_keycodes[i], 0); + } +} + +static void ir_mce_kbd_process_mouse_data(struct input_dev *idev, u32 scancode) +{ + /* raw mouse coordinates */ + u8 xdata = (scancode >> 7) & 0x7f; + u8 ydata = (scancode >> 14) & 0x7f; + int x, y; + /* mouse buttons */ + bool right = scancode & 0x40; + bool left = scancode & 0x20; + + if (xdata & 0x40) + x = -((~xdata & 0x7f) + 1); + else + x = xdata; + + if (ydata & 0x40) + y = -((~ydata & 0x7f) + 1); + else + y = ydata; + + IR_dprintk(1, "mouse: x = %d, y = %d, btns = %s%s\n", + x, y, left ? "L" : "", right ? "R" : ""); + + input_report_rel(idev, REL_X, x); + input_report_rel(idev, REL_Y, y); + + input_report_key(idev, BTN_LEFT, left); + input_report_key(idev, BTN_RIGHT, right); +} + +/** + * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space + * @dev: the struct rc_dev descriptor of the device + * @ev: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct mce_kbd_dec *data = &dev->raw->mce_kbd; + u32 scancode; + unsigned long delay; + + if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) + data->state = STATE_INACTIVE; + return 0; + } + + if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) + goto out; + +again: + IR_dprintk(2, "started at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2)) + return 0; + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + /* Note: larger margin on first pulse since each MCIR2_UNIT + is quite short and some hardware takes some time to + adjust to the signal */ + if (!eq_margin(ev.duration, MCIR2_PREFIX_PULSE, MCIR2_UNIT)) + break; + + data->state = STATE_HEADER_BIT_START; + data->count = 0; + data->header = 0; + return 0; + + case STATE_HEADER_BIT_START: + if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) + break; + + data->header <<= 1; + if (ev.pulse) + data->header |= 1; + data->count++; + data->state = STATE_HEADER_BIT_END; + return 0; + + case STATE_HEADER_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + decrease_duration(&ev, MCIR2_BIT_END); + + if (data->count != MCIR2_HEADER_NBITS) { + data->state = STATE_HEADER_BIT_START; + goto again; + } + + switch (mce_kbd_mode(data)) { + case MCIR2_MODE_KEYBOARD: + data->wanted_bits = MCIR2_KEYBOARD_NBITS; + break; + case MCIR2_MODE_MOUSE: + data->wanted_bits = MCIR2_MOUSE_NBITS; + break; + default: + IR_dprintk(1, "not keyboard or mouse data\n"); + goto out; + } + + data->count = 0; + data->body = 0; + data->state = STATE_BODY_BIT_START; + goto again; + + case STATE_BODY_BIT_START: + if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2)) + break; + + data->body <<= 1; + if (ev.pulse) + data->body |= 1; + data->count++; + data->state = STATE_BODY_BIT_END; + return 0; + + case STATE_BODY_BIT_END: + if (!is_transition(&ev, &dev->raw->prev_ev)) + break; + + if (data->count == data->wanted_bits) + data->state = STATE_FINISHED; + else + data->state = STATE_BODY_BIT_START; + + decrease_duration(&ev, MCIR2_BIT_END); + goto again; + + case STATE_FINISHED: + if (ev.pulse) + break; + + switch (data->wanted_bits) { + case MCIR2_KEYBOARD_NBITS: + scancode = data->body & 0xffff; + IR_dprintk(1, "keyboard data 0x%08x\n", data->body); + if (dev->timeout) + delay = usecs_to_jiffies(dev->timeout / 1000); + else + delay = msecs_to_jiffies(100); + mod_timer(&data->rx_timeout, jiffies + delay); + /* Pass data to keyboard buffer parser */ + ir_mce_kbd_process_keyboard_data(data->idev, scancode); + break; + case MCIR2_MOUSE_NBITS: + scancode = data->body & 0x1fffff; + IR_dprintk(1, "mouse data 0x%06x\n", scancode); + /* Pass data to mouse buffer parser */ + ir_mce_kbd_process_mouse_data(data->idev, scancode); + break; + default: + IR_dprintk(1, "not keyboard or mouse data\n"); + goto out; + } + + data->state = STATE_INACTIVE; + input_sync(data->idev); + return 0; + } + +out: + IR_dprintk(1, "failed at state %i (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + input_sync(data->idev); + return -EINVAL; +} + +static int ir_mce_kbd_register(struct rc_dev *dev) +{ + struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; + struct input_dev *idev; + int i, ret; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + snprintf(mce_kbd->name, sizeof(mce_kbd->name), + "MCE IR Keyboard/Mouse (%s)", dev->driver_name); + strlcat(mce_kbd->phys, "/input0", sizeof(mce_kbd->phys)); + + idev->name = mce_kbd->name; + idev->phys = mce_kbd->phys; + + /* Keyboard bits */ + set_bit(EV_KEY, idev->evbit); + set_bit(EV_REP, idev->evbit); + for (i = 0; i < sizeof(kbd_keycodes); i++) + set_bit(kbd_keycodes[i], idev->keybit); + + /* Mouse bits */ + set_bit(EV_REL, idev->evbit); + set_bit(REL_X, idev->relbit); + set_bit(REL_Y, idev->relbit); + set_bit(BTN_LEFT, idev->keybit); + set_bit(BTN_RIGHT, idev->keybit); + + /* Report scancodes too */ + set_bit(EV_MSC, idev->evbit); + set_bit(MSC_SCAN, idev->mscbit); + + setup_timer(&mce_kbd->rx_timeout, mce_kbd_rx_timeout, + (unsigned long)mce_kbd); + + input_set_drvdata(idev, mce_kbd); + +#if 0 + /* Adding this reference means two input devices are associated with + * this rc-core device, which ir-keytable doesn't cope with yet */ + idev->dev.parent = &dev->dev; +#endif + + ret = input_register_device(idev); + if (ret < 0) { + input_free_device(idev); + return -EIO; + } + + mce_kbd->idev = idev; + + return 0; +} + +static int ir_mce_kbd_unregister(struct rc_dev *dev) +{ + struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd; + struct input_dev *idev = mce_kbd->idev; + + del_timer_sync(&mce_kbd->rx_timeout); + input_unregister_device(idev); + + return 0; +} + +static struct ir_raw_handler mce_kbd_handler = { + .protocols = RC_TYPE_MCE_KBD, + .decode = ir_mce_kbd_decode, + .raw_register = ir_mce_kbd_register, + .raw_unregister = ir_mce_kbd_unregister, +}; + +static int __init ir_mce_kbd_decode_init(void) +{ + ir_raw_handler_register(&mce_kbd_handler); + + printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n"); + return 0; +} + +static void __exit ir_mce_kbd_decode_exit(void) +{ + ir_raw_handler_unregister(&mce_kbd_handler); +} + +module_init(ir_mce_kbd_decode_init); +module_exit(ir_mce_kbd_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>"); +MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder"); diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 423ed45..27808bb5 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -355,6 +355,7 @@ static void init_decoders(struct work_struct *work) load_rc6_decode(); load_jvc_decode(); load_sony_decode(); + load_mce_kbd_decode(); load_lirc_codec(); /* If needed, we may later add some init code. In this case, diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index d20168f..682009d 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -382,7 +382,7 @@ static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle) /* transmit out IR pulses; what you get here is a batch of alternating * pulse/space/pulse/space lengths that we should write out completely through * the FIFO, blocking on a full FIFO */ -static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n) +static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n) { unsigned long flags; struct ite_dev *dev = rcdev->priv; @@ -398,9 +398,6 @@ static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n) /* clear the array just in case */ memset(last_sent, 0, ARRAY_SIZE(last_sent)); - /* n comes in bytes; convert to ints */ - n /= sizeof(int); - spin_lock_irqsave(&dev->lock, flags); /* let everybody know we're now transmitting */ diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c index 01b69bc..c3907e2 100644 --- a/drivers/media/rc/keymaps/rc-rc6-mce.c +++ b/drivers/media/rc/keymaps/rc-rc6-mce.c @@ -29,7 +29,7 @@ static struct rc_map_table rc6_mce[] = { { 0x800f040a, KEY_DELETE }, { 0x800f040b, KEY_ENTER }, - { 0x800f040c, KEY_POWER }, /* PC Power */ + { 0x800f040c, KEY_SLEEP }, /* Formerly PC Power */ { 0x800f040d, KEY_MEDIA }, /* Windows MCE button */ { 0x800f040e, KEY_MUTE }, { 0x800f040f, KEY_INFO }, @@ -44,7 +44,6 @@ static struct rc_map_table rc6_mce[] = { { 0x800f0416, KEY_PLAY }, { 0x800f0417, KEY_RECORD }, { 0x800f0418, KEY_PAUSE }, - { 0x800f046e, KEY_PLAYPAUSE }, { 0x800f0419, KEY_STOP }, { 0x800f041a, KEY_NEXT }, { 0x800f041b, KEY_PREVIOUS }, diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index ec972dc..85ff9a1 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -692,20 +692,18 @@ static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size) } /* Send data out the IR blaster port(s) */ -static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) { struct mceusb_dev *ir = dev->priv; int i, ret = 0; - int count, cmdcount = 0; + int cmdcount = 0; unsigned char *cmdbuf; /* MCE command buffer */ long signal_duration = 0; /* Singnal length in us */ struct timeval start_time, end_time; do_gettimeofday(&start_time); - count = n / sizeof(int); - - cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL); + cmdbuf = kzalloc(sizeof(unsigned) * MCE_CMDBUF_SIZE, GFP_KERNEL); if (!cmdbuf) return -ENOMEM; @@ -774,7 +772,7 @@ static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) out: kfree(cmdbuf); - return ret ? ret : n; + return ret ? ret : count; } /* Sets active IR outputs -- mce devices typically have two */ diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index ce595f9..eae05b5 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -546,24 +546,18 @@ static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier) * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to * set TXFCONT as 0xff, until buf_count less than 0xff. */ -static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +static int nvt_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned n) { struct nvt_dev *nvt = dev->priv; unsigned long flags; - size_t cur_count; unsigned int i; u8 iren; int ret; spin_lock_irqsave(&nvt->tx.lock, flags); - if (n >= TX_BUF_LEN) { - nvt->tx.buf_count = cur_count = TX_BUF_LEN; - ret = TX_BUF_LEN; - } else { - nvt->tx.buf_count = cur_count = n; - ret = n; - } + ret = min((unsigned)(TX_BUF_LEN / sizeof(unsigned)), n); + nvt->tx.buf_count = (ret * sizeof(unsigned)); memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count); diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index 873b387..04c2c72 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -84,6 +84,17 @@ struct ir_raw_event_ctrl { unsigned count; unsigned wanted_bits; } rc5_sz; + struct mce_kbd_dec { + struct input_dev *idev; + struct timer_list rx_timeout; + char name[64]; + char phys[64]; + int state; + u8 header; + u32 body; + unsigned count; + unsigned wanted_bits; + } mce_kbd; struct lirc_codec { struct rc_dev *dev; struct lirc_driver *drv; @@ -182,6 +193,13 @@ void ir_raw_init(void); #define load_sony_decode() 0 #endif +/* from ir-mce_kbd-decoder.c */ +#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE +#define load_mce_kbd_decode() request_module("ir-mce_kbd-decoder") +#else +#define load_mce_kbd_decode() 0 +#endif + /* from ir-lirc-codec.c */ #ifdef CONFIG_IR_LIRC_CODEC_MODULE #define load_lirc_codec() request_module("ir-lirc-codec") diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c index cc846b2..efc6a51 100644 --- a/drivers/media/rc/rc-loopback.c +++ b/drivers/media/rc/rc-loopback.c @@ -101,21 +101,14 @@ static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max) return 0; } -static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) +static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) { struct loopback_dev *lodev = dev->priv; u32 rxmask; - unsigned count; unsigned total_duration = 0; unsigned i; DEFINE_IR_RAW_EVENT(rawir); - if (n == 0 || n % sizeof(int)) { - dprintk("invalid tx buffer size\n"); - return -EINVAL; - } - - count = n / sizeof(int); for (i = 0; i < count; i++) total_duration += abs(txbuf[i]); @@ -142,7 +135,7 @@ static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n) for (i = 0; i < count; i++) { rawir.pulse = i % 2 ? false : true; - rawir.duration = abs(txbuf[i]) * 1000; + rawir.duration = txbuf[i] * 1000; if (rawir.duration) ir_raw_event_store_with_filter(dev, &rawir); } @@ -158,7 +151,7 @@ out: /* Lirc expects this function to take as long as the total duration */ set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(usecs_to_jiffies(total_duration)); - return n; + return count; } static void loop_set_idle(struct rc_dev *dev, bool enable) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 3186ac7..51a23f4 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -735,6 +735,7 @@ static struct { { RC_TYPE_JVC, "jvc" }, { RC_TYPE_SONY, "sony" }, { RC_TYPE_RC5_SZ, "rc-5-sz" }, + { RC_TYPE_MCE_KBD, "mce_kbd" }, { RC_TYPE_LIRC, "lirc" }, { RC_TYPE_OTHER, "other" }, }; @@ -1099,7 +1100,6 @@ int rc_register_device(struct rc_dev *dev) if (rc < 0) goto out_input; } - mutex_unlock(&dev->lock); if (dev->change_protocol) { rc = dev->change_protocol(dev, rc_map->rc_type); @@ -1107,6 +1107,8 @@ int rc_register_device(struct rc_dev *dev) goto out_raw; } + mutex_unlock(&dev->lock); + IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n", dev->devno, dev->driver_name ? dev->driver_name : "unknown", diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c index 5147767..a166044 100644 --- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -205,6 +205,7 @@ struct redrat3_dev { /* rx signal timeout timer */ struct timer_list rx_timeout; + u32 hw_timeout; /* Is the device currently receiving? */ bool recv_in_progress; @@ -414,20 +415,10 @@ static u32 redrat3_us_to_len(u32 microsec) } -/* timer callback to send long trailing space on receive timeout */ +/* timer callback to send reset event */ static void redrat3_rx_timeout(unsigned long data) { struct redrat3_dev *rr3 = (struct redrat3_dev *)data; - DEFINE_IR_RAW_EVENT(rawir); - - rawir.pulse = false; - rawir.duration = rr3->rc->timeout; - rr3_dbg(rr3->dev, "storing trailing space with duration %d\n", - rawir.duration); - ir_raw_event_store_with_filter(rr3->rc, &rawir); - - rr3_dbg(rr3->dev, "calling ir_raw_event_handle\n"); - ir_raw_event_handle(rr3->rc); rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n"); ir_raw_event_reset(rr3->rc); @@ -438,7 +429,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) DEFINE_IR_RAW_EVENT(rawir); struct redrat3_signal_header header; struct device *dev; - int i; + int i, trailer = 0; unsigned long delay; u32 mod_freq, single_len; u16 *len_vals; @@ -464,7 +455,8 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) if (!(header.length >= RR3_HEADER_LENGTH)) dev_warn(dev, "read returned less than rr3 header len\n"); - delay = usecs_to_jiffies(rr3->rc->timeout / 1000); + /* Make sure we reset the IR kfifo after a bit of inactivity */ + delay = usecs_to_jiffies(rr3->hw_timeout); mod_timer(&rr3->rx_timeout, jiffies + delay); memcpy(&tmp32, sig_data + RR3_PAUSE_OFFSET, sizeof(tmp32)); @@ -506,9 +498,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) u16 val = len_vals[data_vals[i]]; single_len = redrat3_len_to_us((u32)be16_to_cpu(val)); - /* cap the value to IR_MAX_DURATION */ - single_len &= IR_MAX_DURATION; - /* we should always get pulse/space/pulse/space samples */ if (i % 2) rawir.pulse = false; @@ -516,6 +505,12 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) rawir.pulse = true; rawir.duration = US_TO_NS(single_len); + /* Save initial pulse length to fudge trailer */ + if (i == 0) + trailer = rawir.duration; + /* cap the value to IR_MAX_DURATION */ + rawir.duration &= IR_MAX_DURATION; + rr3_dbg(dev, "storing %s with duration %d (i: %d)\n", rawir.pulse ? "pulse" : "space", rawir.duration, i); ir_raw_event_store_with_filter(rr3->rc, &rawir); @@ -525,7 +520,10 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3) if (i % 2) { rawir.pulse = false; /* this duration is made up, and may not be ideal... */ - rawir.duration = rr3->rc->timeout / 2; + if (trailer < US_TO_NS(1000)) + rawir.duration = US_TO_NS(2800); + else + rawir.duration = trailer; rr3_dbg(dev, "storing trailing space with duration %d\n", rawir.duration); ir_raw_event_store_with_filter(rr3->rc, &rawir); @@ -629,36 +627,31 @@ static inline void redrat3_delete(struct redrat3_dev *rr3, kfree(rr3); } -static u32 redrat3_get_timeout(struct device *dev, - struct rc_dev *rc, struct usb_device *udev) +static u32 redrat3_get_timeout(struct redrat3_dev *rr3) { u32 *tmp; - u32 timeout = MS_TO_NS(150); /* a sane default, if things go haywire */ + u32 timeout = MS_TO_US(150); /* a sane default, if things go haywire */ int len, ret, pipe; len = sizeof(*tmp); tmp = kzalloc(len, GFP_KERNEL); if (!tmp) { - dev_warn(dev, "Memory allocation faillure\n"); + dev_warn(rr3->dev, "Memory allocation faillure\n"); return timeout; } - pipe = usb_rcvctrlpipe(udev, 0); - ret = usb_control_msg(udev, pipe, RR3_GET_IR_PARAM, + pipe = usb_rcvctrlpipe(rr3->udev, 0); + ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); if (ret != len) { - dev_warn(dev, "Failed to read timeout from hardware\n"); + dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); return timeout; } - timeout = US_TO_NS(redrat3_len_to_us(be32_to_cpu(*tmp))); - if (timeout < rc->min_timeout) - timeout = rc->min_timeout; - else if (timeout > rc->max_timeout) - timeout = rc->max_timeout; + timeout = redrat3_len_to_us(be32_to_cpu(*tmp)); - rr3_dbg(dev, "Got timeout of %d ms\n", timeout / (1000 * 1000)); + rr3_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000); return timeout; } @@ -1110,9 +1103,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3) rc->priv = rr3; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT); - rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT); - rc->timeout = redrat3_get_timeout(dev, rc, rr3->udev); + rc->timeout = US_TO_NS(2750); rc->tx_ir = redrat3_transmit_ir; rc->s_tx_carrier = redrat3_set_tx_carrier; rc->driver_name = DRIVER_NAME; @@ -1186,7 +1177,7 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf, rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL); if (rr3 == NULL) { dev_err(dev, "Memory allocation failure\n"); - goto error; + goto no_endpoints; } rr3->dev = &intf->dev; @@ -1242,6 +1233,9 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf, if (retval < 0) goto error; + /* store current hardware timeout, in us, will use for kfifo resets */ + rr3->hw_timeout = redrat3_get_timeout(rr3); + /* default.. will get overridden by any sends with a freq defined */ rr3->carrier = 38000; @@ -1280,6 +1274,7 @@ static void __devexit redrat3_dev_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); rc_unregister_device(rr3->rc); + del_timer_sync(&rr3->rx_timeout); redrat3_delete(rr3, udev); rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n"); diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index 5d06b89..bec8abc 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -6,8 +6,8 @@ * could probably support others (Winbond WEC102X, NatSemi, etc) * with minor modifications. * - * Original Author: David Härdeman <david@hardeman.nu> - * Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu> + * Original Author: David Härdeman <david@hardeman.nu> + * Copyright (C) 2009 - 2011 David Härdeman <david@hardeman.nu> * * Dedicated to my daughter Matilda, without whose loving attention this * driver would have been finished in half the time and with a fraction @@ -577,16 +577,12 @@ wbcir_txmask(struct rc_dev *dev, u32 mask) } static int -wbcir_tx(struct rc_dev *dev, int *buf, u32 bufsize) +wbcir_tx(struct rc_dev *dev, unsigned *buf, unsigned count) { struct wbcir_data *data = dev->priv; - u32 count; unsigned i; unsigned long flags; - /* bufsize has been sanity checked by the caller */ - count = bufsize / sizeof(int); - /* Not sure if this is possible, but better safe than sorry */ spin_lock_irqsave(&data->spinlock, flags); if (data->txstate != WBCIR_TXSTATE_INACTIVE) { @@ -876,18 +872,8 @@ wbcir_init_hw(struct wbcir_data *data) /* prescaler 1.0, tx/rx fifo lvl 16 */ outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); - /* Set baud divisor to generate one byte per bit/cell */ - switch (protocol) { - case IR_PROTOCOL_RC5: - outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_RC6: - outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_NEC: - outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); - break; - } + /* Set baud divisor to sample every 10 us */ + outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL); outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); /* Set CEIR mode */ @@ -896,9 +882,9 @@ wbcir_init_hw(struct wbcir_data *data) inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ - /* Disable RX demod, run-length encoding/decoding, set freq span */ + /* Disable RX demod, enable run-length enc/dec, set freq span */ wbcir_select_bank(data, WBCIR_BANK_7); - outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); + outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG); /* Disable timer */ wbcir_select_bank(data, WBCIR_BANK_4); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bb53de7..f574dc0 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -489,6 +489,15 @@ config VIDEO_TCM825X This is a driver for the Toshiba TCM825x VGA camera sensor. It is used for example in Nokia N800. +comment "Flash devices" + +config VIDEO_ADP1653 + tristate "ADP1653 flash support" + depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER + ---help--- + This is a driver for the ADP1653 flash controller. It is used for + example in Nokia N900. + comment "Video improvement chips" config VIDEO_UPD64031A @@ -707,6 +716,8 @@ source "drivers/media/video/cx18/Kconfig" source "drivers/media/video/saa7164/Kconfig" +source "drivers/media/video/marvell-ccic/Kconfig" + config VIDEO_M32R_AR tristate "AR devices" depends on M32R && VIDEO_V4L2 @@ -726,15 +737,6 @@ config VIDEO_M32R_AR_M64278 To compile this driver as a module, choose M here: the module will be called arv. -config VIDEO_CAFE_CCIC - tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" - depends on PCI && I2C && VIDEO_V4L2 - select VIDEO_OV7670 - ---help--- - This is a video4linux2 driver for the Marvell 88ALP01 integrated - CMOS camera controller. This is the controller found on first- - generation OLPC systems. - config VIDEO_SR030PC30 tristate "SR030PC30 VGA camera sensor support" depends on I2C && VIDEO_V4L2 @@ -846,6 +848,12 @@ config SOC_CAMERA_OV2640 help This is a ov2640 camera driver +config SOC_CAMERA_OV5642 + tristate "ov5642 camera support" + depends on SOC_CAMERA && I2C + help + This is a V4L2 camera driver for the OmniVision OV5642 sensor + config SOC_CAMERA_OV6650 tristate "ov6650 sensor support" depends on SOC_CAMERA && I2C @@ -952,6 +960,14 @@ config VIDEO_SAMSUNG_S5P_FIMC To compile this driver as a module, choose M here: the module will be called s5p-fimc. +config VIDEO_ATMEL_ISI + tristate "ATMEL Image Sensor Interface (ISI) support" + depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 + select VIDEOBUF2_DMA_CONTIG + ---help--- + This module makes the ATMEL Image Sensor Interface available + as a v4l2 device. + config VIDEO_S5P_MIPI_CSIS tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API @@ -961,6 +977,8 @@ config VIDEO_S5P_MIPI_CSIS To compile this driver as a module, choose M here: the module will be called s5p-csis. +source "drivers/media/video/s5p-tv/Kconfig" + # # USB Multimedia device configuration # @@ -1056,4 +1074,12 @@ config VIDEO_MEM2MEM_TESTDEV framework. +config VIDEO_SAMSUNG_S5P_MFC + tristate "Samsung S5P MFC 5.1 Video Codec" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + default n + help + MFC 5.1 driver for V4L2. + endif # V4L_MEM2MEM_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index f0fecd6..2723900 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ +obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o @@ -78,6 +79,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o +obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o @@ -127,7 +129,8 @@ obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o -obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o +obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/ +obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/ obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o @@ -166,8 +169,11 @@ obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o +obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ obj-$(CONFIG_ARCH_DAVINCI) += davinci/ diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c new file mode 100644 index 0000000..be7befd --- /dev/null +++ b/drivers/media/video/adp1653.c @@ -0,0 +1,491 @@ +/* + * drivers/media/video/adp1653.c + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * + * Contributors: + * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> + * Tuukka Toivonen <tuukkat76@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + * TODO: + * - fault interrupt handling + * - hardware strobe + * - power doesn't need to be ON if all lights are off + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/version.h> +#include <media/adp1653.h> +#include <media/v4l2-device.h> + +#define TIMEOUT_MAX 820000 +#define TIMEOUT_STEP 54600 +#define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ + * TIMEOUT_STEP) +#define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ + / TIMEOUT_STEP) +#define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP) + +/* Write values into ADP1653 registers. */ +static int adp1653_update_hw(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel; + u8 config = 0; + int rval; + + out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + + switch (flash->led_mode->val) { + case V4L2_FLASH_LED_MODE_NONE: + break; + case V4L2_FLASH_LED_MODE_FLASH: + /* Flash mode, light on with strobe, duration from timer */ + config = ADP1653_REG_CONFIG_TMR_CFG; + config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) + << ADP1653_REG_CONFIG_TMR_SET_SHIFT; + break; + case V4L2_FLASH_LED_MODE_TORCH: + /* Torch mode, light immediately on, duration indefinite */ + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->torch_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + break; + } + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval < 0) + return rval; + + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); + if (rval < 0) + return rval; + + return 0; +} + +static int adp1653_get_fault(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int fault; + int rval; + + fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); + if (IS_ERR_VALUE(fault)) + return fault; + + flash->fault |= fault; + + if (!flash->fault) + return 0; + + /* Clear faults. */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (IS_ERR_VALUE(rval)) + return rval; + + flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; + + rval = adp1653_update_hw(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + return flash->fault; +} + +static int adp1653_strobe(struct adp1653_flash *flash, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( + flash->indicator_intensity->val) + << ADP1653_REG_OUT_SEL_ILED_SHIFT; + int rval; + + if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) + return -EBUSY; + + if (!enable) + return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, + out_sel); + + out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( + flash->flash_intensity->val) + << ADP1653_REG_OUT_SEL_HPLED_SHIFT; + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); + if (rval) + return rval; + + /* Software strobe using i2c */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, + ADP1653_REG_SW_STROBE_SW_STROBE); + if (rval) + return rval; + return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); +} + +/* -------------------------------------------------------------------------- + * V4L2 controls + */ + +static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + + ctrl->cur.val = 0; + + if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) + ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OT) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; + if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) + ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; + if (flash->fault & ADP1653_REG_FAULT_FLT_OV) + ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; + + flash->fault = 0; + + return 0; +} + +static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct adp1653_flash *flash = + container_of(ctrl->handler, struct adp1653_flash, ctrls); + int rval; + + rval = adp1653_get_fault(flash); + if (IS_ERR_VALUE(rval)) + return rval; + if ((rval & (ADP1653_REG_FAULT_FLT_SCP | + ADP1653_REG_FAULT_FLT_OT | + ADP1653_REG_FAULT_FLT_OV)) && + (ctrl->id == V4L2_CID_FLASH_STROBE || + ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || + ctrl->id == V4L2_CID_FLASH_LED_MODE)) + return -EBUSY; + + switch (ctrl->id) { + case V4L2_CID_FLASH_STROBE: + return adp1653_strobe(flash, 1); + case V4L2_CID_FLASH_STROBE_STOP: + return adp1653_strobe(flash, 0); + } + + return adp1653_update_hw(flash); +} + +static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { + .g_volatile_ctrl = adp1653_get_ctrl, + .s_ctrl = adp1653_set_ctrl, +}; + +static int adp1653_init_controls(struct adp1653_flash *flash) +{ + struct v4l2_ctrl *fault; + + v4l2_ctrl_handler_init(&flash->ctrls, 9); + + flash->led_mode = + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_LED_MODE, + V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); + v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_SOURCE, + V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); + flash->flash_timeout = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, + flash->platform_data->max_flash_timeout, + TIMEOUT_STEP, + flash->platform_data->max_flash_timeout); + flash->flash_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INTENSITY, + ADP1653_FLASH_INTENSITY_MIN, + flash->platform_data->max_flash_intensity, + 1, flash->platform_data->max_flash_intensity); + flash->torch_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_TORCH_INTENSITY, + ADP1653_TORCH_INTENSITY_MIN, + flash->platform_data->max_torch_intensity, + ADP1653_FLASH_INTENSITY_STEP, + flash->platform_data->max_torch_intensity); + flash->indicator_intensity = + v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_INDICATOR_INTENSITY, + ADP1653_INDICATOR_INTENSITY_MIN, + flash->platform_data->max_indicator_intensity, + ADP1653_INDICATOR_INTENSITY_STEP, + ADP1653_INDICATOR_INTENSITY_MIN); + fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, + V4L2_CID_FLASH_FAULT, 0, + V4L2_FLASH_FAULT_OVER_VOLTAGE + | V4L2_FLASH_FAULT_OVER_TEMPERATURE + | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); + + if (flash->ctrls.error) + return flash->ctrls.error; + + fault->is_volatile = 1; + + flash->subdev.ctrl_handler = &flash->ctrls; + return 0; +} + +/* -------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static int +adp1653_init_device(struct adp1653_flash *flash) +{ + struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); + int rval; + + /* Clear FAULT register by writing zero to OUT_SEL */ + rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); + if (rval < 0) { + dev_err(&client->dev, "failed writing fault register\n"); + return -EIO; + } + + mutex_lock(&flash->ctrls.lock); + /* Reset faults before reading new ones. */ + flash->fault = 0; + rval = adp1653_get_fault(flash); + mutex_unlock(&flash->ctrls.lock); + if (rval > 0) { + dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); + return -EIO; + } + + mutex_lock(&flash->ctrls.lock); + rval = adp1653_update_hw(flash); + mutex_unlock(&flash->ctrls.lock); + if (rval) { + dev_err(&client->dev, + "adp1653_update_hw failed at %s\n", __func__); + return -EIO; + } + + return 0; +} + +static int +__adp1653_set_power(struct adp1653_flash *flash, int on) +{ + int ret; + + ret = flash->platform_data->power(&flash->subdev, on); + if (ret < 0) + return ret; + + if (!on) + return 0; + + ret = adp1653_init_device(flash); + if (ret < 0) + flash->platform_data->power(&flash->subdev, 0); + + return ret; +} + +static int +adp1653_set_power(struct v4l2_subdev *subdev, int on) +{ + struct adp1653_flash *flash = to_adp1653_flash(subdev); + int ret = 0; + + mutex_lock(&flash->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (flash->power_count == !on) { + ret = __adp1653_set_power(flash, !!on); + if (ret < 0) + goto done; + } + + /* Update the power count. */ + flash->power_count += on ? 1 : -1; + WARN_ON(flash->power_count < 0); + +done: + mutex_unlock(&flash->power_lock); + return ret; +} + +static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 1); +} + +static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return adp1653_set_power(sd, 0); +} + +static const struct v4l2_subdev_core_ops adp1653_core_ops = { + .s_power = adp1653_set_power, +}; + +static const struct v4l2_subdev_ops adp1653_ops = { + .core = &adp1653_core_ops, +}; + +static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { + .open = adp1653_open, + .close = adp1653_close, +}; + +/* -------------------------------------------------------------------------- + * I2C driver + */ +#ifdef CONFIG_PM + +static int adp1653_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 0); +} + +static int adp1653_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + if (!flash->power_count) + return 0; + + return __adp1653_set_power(flash, 1); +} + +#else + +#define adp1653_suspend NULL +#define adp1653_resume NULL + +#endif /* CONFIG_PM */ + +static int adp1653_probe(struct i2c_client *client, + const struct i2c_device_id *devid) +{ + struct adp1653_flash *flash; + int ret; + + flash = kzalloc(sizeof(*flash), GFP_KERNEL); + if (flash == NULL) + return -ENOMEM; + + flash->platform_data = client->dev.platform_data; + + mutex_init(&flash->power_lock); + + v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); + flash->subdev.internal_ops = &adp1653_internal_ops; + flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + adp1653_init_controls(flash); + + ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); + if (ret < 0) + kfree(flash); + + return ret; +} + +static int __exit adp1653_remove(struct i2c_client *client) +{ + struct v4l2_subdev *subdev = i2c_get_clientdata(client); + struct adp1653_flash *flash = to_adp1653_flash(subdev); + + v4l2_device_unregister_subdev(&flash->subdev); + v4l2_ctrl_handler_free(&flash->ctrls); + media_entity_cleanup(&flash->subdev.entity); + kfree(flash); + return 0; +} + +static const struct i2c_device_id adp1653_id_table[] = { + { ADP1653_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp1653_id_table); + +static struct dev_pm_ops adp1653_pm_ops = { + .suspend = adp1653_suspend, + .resume = adp1653_resume, +}; + +static struct i2c_driver adp1653_i2c_driver = { + .driver = { + .name = ADP1653_NAME, + .pm = &adp1653_pm_ops, + }, + .probe = adp1653_probe, + .remove = __exit_p(adp1653_remove), + .id_table = adp1653_id_table, +}; + +static int __init adp1653_init(void) +{ + int rval; + + rval = i2c_add_driver(&adp1653_i2c_driver); + if (rval) + printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__); + + return rval; +} + +static void __exit adp1653_exit(void) +{ + i2c_del_driver(&adp1653_i2c_driver); +} + +module_init(adp1653_init); +module_exit(adp1653_exit); + +MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); +MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index f989f28..b6ed44a 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -27,7 +27,6 @@ #include <linux/slab.h> #include <linux/mm.h> #include <linux/sched.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <media/v4l2-device.h> @@ -54,7 +53,7 @@ */ #define USE_INT 0 /* Don't modify */ -#define VERSION "0.04" +#define VERSION "0.0.5" #define ar_inl(addr) inl((unsigned long)(addr)) #define ar_outl(val, addr) outl((unsigned long)(val), (unsigned long)(addr)) @@ -404,7 +403,6 @@ static int ar_querycap(struct file *file, void *priv, strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver)); strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card)); strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info)); - vcap->version = KERNEL_VERSION(0, 0, 4); vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; return 0; } @@ -879,3 +877,4 @@ module_exit(ar_cleanup_module); MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>"); MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux"); MODULE_LICENSE("GPL"); +MODULE_VERSION(VERSION); diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c new file mode 100644 index 0000000..7b89f00 --- /dev/null +++ b/drivers/media/video/atmel-isi.c @@ -0,0 +1,1048 @@ +/* + * Copyright (c) 2011 Atmel Corporation + * Josh Wu, <josh.wu@atmel.com> + * + * Based on previous work by Lars Haring, <lars.haring@atmel.com> + * and Sedji Gaouaou + * Based on the bttv driver for Bt848 with respective copyright holders + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <media/atmel-isi.h> +#include <media/soc_camera.h> +#include <media/soc_mediabus.h> +#include <media/videobuf2-dma-contig.h> + +#define MAX_BUFFER_NUM 32 +#define MAX_SUPPORT_WIDTH 2048 +#define MAX_SUPPORT_HEIGHT 2048 +#define VID_LIMIT_BYTES (16 * 1024 * 1024) +#define MIN_FRAME_RATE 15 +#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE) + +/* ISI states */ +enum { + ISI_STATE_IDLE = 0, + ISI_STATE_READY, + ISI_STATE_WAIT_SOF, +}; + +/* Frame buffer descriptor */ +struct fbd { + /* Physical address of the frame buffer */ + u32 fb_address; + /* DMA Control Register(only in HISI2) */ + u32 dma_ctrl; + /* Physical address of the next fbd */ + u32 next_fbd_address; +}; + +static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl) +{ + fb_desc->dma_ctrl = ctrl; +} + +struct isi_dma_desc { + struct list_head list; + struct fbd *p_fbd; + u32 fbd_phys; +}; + +/* Frame buffer data */ +struct frame_buffer { + struct vb2_buffer vb; + struct isi_dma_desc *p_dma_desc; + struct list_head list; +}; + +struct atmel_isi { + /* Protects the access of variables shared with the ISR */ + spinlock_t lock; + void __iomem *regs; + + int sequence; + /* State of the ISI module in capturing mode */ + int state; + + /* Wait queue for waiting for SOF */ + wait_queue_head_t vsync_wq; + + struct vb2_alloc_ctx *alloc_ctx; + + /* Allocate descriptors for dma buffer use */ + struct fbd *p_fb_descriptors; + u32 fb_descriptors_phys; + struct list_head dma_desc_head; + struct isi_dma_desc dma_desc[MAX_BUFFER_NUM]; + + struct completion complete; + struct clk *pclk; + unsigned int irq; + + struct isi_platform_data *pdata; + + struct list_head video_buffer_list; + struct frame_buffer *active; + + struct soc_camera_device *icd; + struct soc_camera_host soc_host; +}; + +static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val) +{ + writel(val, isi->regs + reg); +} +static u32 isi_readl(struct atmel_isi *isi, u32 reg) +{ + return readl(isi->regs + reg); +} + +static int configure_geometry(struct atmel_isi *isi, u32 width, + u32 height, enum v4l2_mbus_pixelcode code) +{ + u32 cfg2, cr; + + switch (code) { + /* YUV, including grey */ + case V4L2_MBUS_FMT_Y8_1X8: + cr = ISI_CFG2_GRAYSCALE; + break; + case V4L2_MBUS_FMT_UYVY8_2X8: + cr = ISI_CFG2_YCC_SWAP_MODE_3; + break; + case V4L2_MBUS_FMT_VYUY8_2X8: + cr = ISI_CFG2_YCC_SWAP_MODE_2; + break; + case V4L2_MBUS_FMT_YUYV8_2X8: + cr = ISI_CFG2_YCC_SWAP_MODE_1; + break; + case V4L2_MBUS_FMT_YVYU8_2X8: + cr = ISI_CFG2_YCC_SWAP_DEFAULT; + break; + /* RGB, TODO */ + default: + return -EINVAL; + } + + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + + cfg2 = isi_readl(isi, ISI_CFG2); + cfg2 |= cr; + /* Set width */ + cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); + cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & + ISI_CFG2_IM_HSIZE_MASK; + /* Set height */ + cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); + cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) + & ISI_CFG2_IM_VSIZE_MASK; + isi_writel(isi, ISI_CFG2, cfg2); + + return 0; +} + +static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi) +{ + if (isi->active) { + struct vb2_buffer *vb = &isi->active->vb; + struct frame_buffer *buf = isi->active; + + list_del_init(&buf->list); + do_gettimeofday(&vb->v4l2_buf.timestamp); + vb->v4l2_buf.sequence = isi->sequence++; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + } + + if (list_empty(&isi->video_buffer_list)) { + isi->active = NULL; + } else { + /* start next dma frame. */ + isi->active = list_entry(isi->video_buffer_list.next, + struct frame_buffer, list); + isi_writel(isi, ISI_DMA_C_DSCR, + isi->active->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_C_CTRL, + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); + } + return IRQ_HANDLED; +} + +/* ISI interrupt service routine */ +static irqreturn_t isi_interrupt(int irq, void *dev_id) +{ + struct atmel_isi *isi = dev_id; + u32 status, mask, pending; + irqreturn_t ret = IRQ_NONE; + + spin_lock(&isi->lock); + + status = isi_readl(isi, ISI_STATUS); + mask = isi_readl(isi, ISI_INTMASK); + pending = status & mask; + + if (pending & ISI_CTRL_SRST) { + complete(&isi->complete); + isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST); + ret = IRQ_HANDLED; + } else if (pending & ISI_CTRL_DIS) { + complete(&isi->complete); + isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS); + ret = IRQ_HANDLED; + } else { + if ((pending & ISI_SR_VSYNC) && + (isi->state == ISI_STATE_IDLE)) { + isi->state = ISI_STATE_READY; + wake_up_interruptible(&isi->vsync_wq); + ret = IRQ_HANDLED; + } + if (likely(pending & ISI_SR_CXFR_DONE)) + ret = atmel_isi_handle_streaming(isi); + } + + spin_unlock(&isi->lock); + return ret; +} + +#define WAIT_ISI_RESET 1 +#define WAIT_ISI_DISABLE 0 +static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset) +{ + unsigned long timeout; + /* + * The reset or disable will only succeed if we have a + * pixel clock from the camera. + */ + init_completion(&isi->complete); + + if (wait_reset) { + isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST); + isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST); + } else { + isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS); + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + } + + timeout = wait_for_completion_timeout(&isi->complete, + msecs_to_jiffies(100)); + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + unsigned long size; + int ret, bytes_per_line; + + /* Reset ISI */ + ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); + if (ret < 0) { + dev_err(icd->parent, "Reset ISI timed out\n"); + return ret; + } + /* Disable all interrupts */ + isi_writel(isi, ISI_INTDIS, ~0UL); + + bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + + if (bytes_per_line < 0) + return bytes_per_line; + + size = bytes_per_line * icd->user_height; + + if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM) + *nbuffers = MAX_BUFFER_NUM; + + if (size * *nbuffers > VID_LIMIT_BYTES) + *nbuffers = VID_LIMIT_BYTES / size; + + *nplanes = 1; + sizes[0] = size; + alloc_ctxs[0] = isi->alloc_ctx; + + isi->sequence = 0; + isi->active = NULL; + + dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__, + *nbuffers, size); + + return 0; +} + +static int buffer_init(struct vb2_buffer *vb) +{ + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); + + buf->p_dma_desc = NULL; + INIT_LIST_HEAD(&buf->list); + + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + unsigned long size; + struct isi_dma_desc *desc; + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, + icd->current_fmt->host_fmt); + + if (bytes_per_line < 0) + return bytes_per_line; + + size = bytes_per_line * icd->user_height; + + if (vb2_plane_size(vb, 0) < size) { + dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(&buf->vb, 0, size); + + if (!buf->p_dma_desc) { + if (list_empty(&isi->dma_desc_head)) { + dev_err(icd->parent, "Not enough dma descriptors.\n"); + return -EINVAL; + } else { + /* Get an available descriptor */ + desc = list_entry(isi->dma_desc_head.next, + struct isi_dma_desc, list); + /* Delete the descriptor since now it is used */ + list_del_init(&desc->list); + + /* Initialize the dma descriptor */ + desc->p_fbd->fb_address = + vb2_dma_contig_plane_paddr(vb, 0); + desc->p_fbd->next_fbd_address = 0; + set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB); + + buf->p_dma_desc = desc; + } + } + return 0; +} + +static void buffer_cleanup(struct vb2_buffer *vb) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); + + /* This descriptor is available now and we add to head list */ + if (buf->p_dma_desc) + list_add(&buf->p_dma_desc->list, &isi->dma_desc_head); +} + +static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer) +{ + u32 ctrl, cfg1; + + cfg1 = isi_readl(isi, ISI_CFG1); + /* Enable irq: cxfr for the codec path, pxfr for the preview path */ + isi_writel(isi, ISI_INTEN, + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); + + /* Check if already in a frame */ + if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) { + dev_err(isi->icd->parent, "Already in frame handling.\n"); + return; + } + + isi_writel(isi, ISI_DMA_C_DSCR, buffer->p_dma_desc->fbd_phys); + isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); + + /* Enable linked list */ + cfg1 |= isi->pdata->frate | ISI_CFG1_DISCR; + + /* Enable codec path and ISI */ + ctrl = ISI_CTRL_CDC | ISI_CTRL_EN; + isi_writel(isi, ISI_CTRL, ctrl); + isi_writel(isi, ISI_CFG1, cfg1); +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); + unsigned long flags = 0; + + spin_lock_irqsave(&isi->lock, flags); + list_add_tail(&buf->list, &isi->video_buffer_list); + + if (isi->active == NULL) { + isi->active = buf; + start_dma(isi, buf); + } + spin_unlock_irqrestore(&isi->lock, flags); +} + +static int start_streaming(struct vb2_queue *vq) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + + u32 sr = 0; + int ret; + + spin_lock_irq(&isi->lock); + isi->state = ISI_STATE_IDLE; + /* Clear any pending SOF interrupt */ + sr = isi_readl(isi, ISI_STATUS); + /* Enable VSYNC interrupt for SOF */ + isi_writel(isi, ISI_INTEN, ISI_SR_VSYNC); + isi_writel(isi, ISI_CTRL, ISI_CTRL_EN); + spin_unlock_irq(&isi->lock); + + dev_dbg(icd->parent, "Waiting for SOF\n"); + ret = wait_event_interruptible(isi->vsync_wq, + isi->state != ISI_STATE_IDLE); + if (ret) + return ret; + + if (isi->state != ISI_STATE_READY) + return -EIO; + + spin_lock_irq(&isi->lock); + isi->state = ISI_STATE_WAIT_SOF; + isi_writel(isi, ISI_INTDIS, ISI_SR_VSYNC); + spin_unlock_irq(&isi->lock); + + return 0; +} + +/* abort streaming and wait for last buffer */ +static int stop_streaming(struct vb2_queue *vq) +{ + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + struct frame_buffer *buf, *node; + int ret = 0; + unsigned long timeout; + + spin_lock_irq(&isi->lock); + isi->active = NULL; + /* Release all active buffers */ + list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) { + list_del_init(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + spin_unlock_irq(&isi->lock); + + timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ; + /* Wait until the end of the current frame. */ + while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) && + time_before(jiffies, timeout)) + msleep(1); + + if (time_after(jiffies, timeout)) { + dev_err(icd->parent, + "Timeout waiting for finishing codec request\n"); + return -ETIMEDOUT; + } + + /* Disable interrupts */ + isi_writel(isi, ISI_INTDIS, + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); + + /* Disable ISI and wait for it is done */ + ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); + if (ret < 0) + dev_err(icd->parent, "Disable ISI timed out\n"); + + return ret; +} + +static struct vb2_ops isi_video_qops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_cleanup = buffer_cleanup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = soc_camera_unlock, + .wait_finish = soc_camera_lock, +}; + +/* ------------------------------------------------------------------ + SOC camera operations for the device + ------------------------------------------------------------------*/ +static int isi_camera_init_videobuf(struct vb2_queue *q, + struct soc_camera_device *icd) +{ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP; + q->drv_priv = icd; + q->buf_struct_size = sizeof(struct frame_buffer); + q->ops = &isi_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + + return vb2_queue_init(q); +} + +static int isi_camera_set_fmt(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + const struct soc_camera_format_xlate *xlate; + struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_mbus_framefmt mf; + int ret; + + xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); + if (!xlate) { + dev_warn(icd->parent, "Format %x not found\n", + pix->pixelformat); + return -EINVAL; + } + + dev_dbg(icd->parent, "Plan to set format %dx%d\n", + pix->width, pix->height); + + mf.width = pix->width; + mf.height = pix->height; + mf.field = pix->field; + mf.colorspace = pix->colorspace; + mf.code = xlate->code; + + ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); + if (ret < 0) + return ret; + + if (mf.code != xlate->code) + return -EINVAL; + + ret = configure_geometry(isi, pix->width, pix->height, xlate->code); + if (ret < 0) + return ret; + + pix->width = mf.width; + pix->height = mf.height; + pix->field = mf.field; + pix->colorspace = mf.colorspace; + icd->current_fmt = xlate; + + dev_dbg(icd->parent, "Finally set format %dx%d\n", + pix->width, pix->height); + + return ret; +} + +static int isi_camera_try_fmt(struct soc_camera_device *icd, + struct v4l2_format *f) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + const struct soc_camera_format_xlate *xlate; + struct v4l2_pix_format *pix = &f->fmt.pix; + struct v4l2_mbus_framefmt mf; + u32 pixfmt = pix->pixelformat; + int ret; + + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (pixfmt && !xlate) { + dev_warn(icd->parent, "Format %x not found\n", pixfmt); + return -EINVAL; + } + + /* limit to Atmel ISI hardware capabilities */ + if (pix->height > MAX_SUPPORT_HEIGHT) + pix->height = MAX_SUPPORT_HEIGHT; + if (pix->width > MAX_SUPPORT_WIDTH) + pix->width = MAX_SUPPORT_WIDTH; + + /* limit to sensor capabilities */ + mf.width = pix->width; + mf.height = pix->height; + mf.field = pix->field; + mf.colorspace = pix->colorspace; + mf.code = xlate->code; + + ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); + if (ret < 0) + return ret; + + pix->width = mf.width; + pix->height = mf.height; + pix->colorspace = mf.colorspace; + + switch (mf.field) { + case V4L2_FIELD_ANY: + pix->field = V4L2_FIELD_NONE; + break; + case V4L2_FIELD_NONE: + break; + default: + dev_err(icd->parent, "Field type %d unsupported.\n", + mf.field); + ret = -EINVAL; + } + + return ret; +} + +static const struct soc_mbus_pixelfmt isi_camera_formats[] = { + { + .fourcc = V4L2_PIX_FMT_YUYV, + .name = "Packed YUV422 16 bit", + .bits_per_sample = 8, + .packing = SOC_MBUS_PACKING_2X8_PADHI, + .order = SOC_MBUS_ORDER_LE, + }, +}; + +/* This will be corrected as we get more formats */ +static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt) +{ + return fmt->packing == SOC_MBUS_PACKING_NONE || + (fmt->bits_per_sample == 8 && + fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) || + (fmt->bits_per_sample > 8 && + fmt->packing == SOC_MBUS_PACKING_EXTEND16); +} + +static unsigned long make_bus_param(struct atmel_isi *isi) +{ + unsigned long flags; + /* + * Platform specified synchronization and pixel clock polarities are + * only a recommendation and are only used during probing. Atmel ISI + * camera interface only works in master mode, i.e., uses HSYNC and + * VSYNC signals from the sensor + */ + flags = SOCAM_MASTER | + SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_HSYNC_ACTIVE_LOW | + SOCAM_VSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_LOW | + SOCAM_PCLK_SAMPLE_RISING | + SOCAM_PCLK_SAMPLE_FALLING | + SOCAM_DATA_ACTIVE_HIGH; + + if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10) + flags |= SOCAM_DATAWIDTH_10; + + if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8) + flags |= SOCAM_DATAWIDTH_8; + + if (flags & SOCAM_DATAWIDTH_MASK) + return flags; + + return 0; +} + +static int isi_camera_try_bus_param(struct soc_camera_device *icd, + unsigned char buswidth) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + unsigned long camera_flags; + int ret; + + camera_flags = icd->ops->query_bus_param(icd); + ret = soc_camera_bus_param_compatible(camera_flags, + make_bus_param(isi)); + if (!ret) + return -EINVAL; + return 0; +} + + +static int isi_camera_get_formats(struct soc_camera_device *icd, + unsigned int idx, + struct soc_camera_format_xlate *xlate) +{ + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); + int formats = 0, ret; + /* sensor format */ + enum v4l2_mbus_pixelcode code; + /* soc camera host format */ + const struct soc_mbus_pixelfmt *fmt; + + ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); + if (ret < 0) + /* No more formats */ + return 0; + + fmt = soc_mbus_get_fmtdesc(code); + if (!fmt) { + dev_err(icd->parent, + "Invalid format code #%u: %d\n", idx, code); + return 0; + } + + /* This also checks support for the requested bits-per-sample */ + ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample); + if (ret < 0) { + dev_err(icd->parent, + "Fail to try the bus parameters.\n"); + return 0; + } + + switch (code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + case V4L2_MBUS_FMT_VYUY8_2X8: + case V4L2_MBUS_FMT_YUYV8_2X8: + case V4L2_MBUS_FMT_YVYU8_2X8: + formats++; + if (xlate) { + xlate->host_fmt = &isi_camera_formats[0]; + xlate->code = code; + xlate++; + dev_dbg(icd->parent, "Providing format %s using code %d\n", + isi_camera_formats[0].name, code); + } + break; + default: + if (!isi_camera_packing_supported(fmt)) + return 0; + if (xlate) + dev_dbg(icd->parent, + "Providing format %s in pass-through mode\n", + fmt->name); + } + + /* Generic pass-through */ + formats++; + if (xlate) { + xlate->host_fmt = fmt; + xlate->code = code; + xlate++; + } + + return formats; +} + +/* Called with .video_lock held */ +static int isi_camera_add_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + int ret; + + if (isi->icd) + return -EBUSY; + + ret = clk_enable(isi->pclk); + if (ret) + return ret; + + isi->icd = icd; + dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n", + icd->devnum); + return 0; +} +/* Called with .video_lock held */ +static void isi_camera_remove_device(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + + BUG_ON(icd != isi->icd); + + clk_disable(isi->pclk); + isi->icd = NULL; + + dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n", + icd->devnum); +} + +static unsigned int isi_camera_poll(struct file *file, poll_table *pt) +{ + struct soc_camera_device *icd = file->private_data; + + return vb2_poll(&icd->vb2_vidq, file, pt); +} + +static int isi_camera_querycap(struct soc_camera_host *ici, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "atmel-isi"); + strcpy(cap->card, "Atmel Image Sensor Interface"); + cap->capabilities = (V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_STREAMING); + return 0; +} + +static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt) +{ + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); + struct atmel_isi *isi = ici->priv; + unsigned long bus_flags, camera_flags, common_flags; + int ret; + u32 cfg1 = 0; + + camera_flags = icd->ops->query_bus_param(icd); + + bus_flags = make_bus_param(isi); + common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags); + dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n", + camera_flags, bus_flags, common_flags); + if (!common_flags) + return -EINVAL; + + /* Make choises, based on platform preferences */ + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { + if (isi->pdata->hsync_act_low) + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && + (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { + if (isi->pdata->vsync_act_low) + common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; + else + common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; + } + + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { + if (isi->pdata->pclk_act_falling) + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; + else + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; + } + + ret = icd->ops->set_bus_param(icd, common_flags); + if (ret < 0) { + dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n", + common_flags, ret); + return ret; + } + + /* set bus param for ISI */ + if (common_flags & SOCAM_HSYNC_ACTIVE_LOW) + cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW; + if (common_flags & SOCAM_VSYNC_ACTIVE_LOW) + cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW; + if (common_flags & SOCAM_PCLK_SAMPLE_FALLING) + cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; + + if (isi->pdata->has_emb_sync) + cfg1 |= ISI_CFG1_EMB_SYNC; + if (isi->pdata->isi_full_mode) + cfg1 |= ISI_CFG1_FULL_MODE; + + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + isi_writel(isi, ISI_CFG1, cfg1); + + return 0; +} + +static struct soc_camera_host_ops isi_soc_camera_host_ops = { + .owner = THIS_MODULE, + .add = isi_camera_add_device, + .remove = isi_camera_remove_device, + .set_fmt = isi_camera_set_fmt, + .try_fmt = isi_camera_try_fmt, + .get_formats = isi_camera_get_formats, + .init_videobuf2 = isi_camera_init_videobuf, + .poll = isi_camera_poll, + .querycap = isi_camera_querycap, + .set_bus_param = isi_camera_set_bus_param, +}; + +/* -----------------------------------------------------------------------*/ +static int __devexit atmel_isi_remove(struct platform_device *pdev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); + struct atmel_isi *isi = container_of(soc_host, + struct atmel_isi, soc_host); + + free_irq(isi->irq, isi); + soc_camera_host_unregister(soc_host); + vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); + dma_free_coherent(&pdev->dev, + sizeof(struct fbd) * MAX_BUFFER_NUM, + isi->p_fb_descriptors, + isi->fb_descriptors_phys); + + iounmap(isi->regs); + clk_put(isi->pclk); + kfree(isi); + + return 0; +} + +static int __devinit atmel_isi_probe(struct platform_device *pdev) +{ + unsigned int irq; + struct atmel_isi *isi; + struct clk *pclk; + struct resource *regs; + int ret, i; + struct device *dev = &pdev->dev; + struct soc_camera_host *soc_host; + struct isi_platform_data *pdata; + + pdata = dev->platform_data; + if (!pdata || !pdata->data_width_flags) { + dev_err(&pdev->dev, + "No config available for Atmel ISI\n"); + return -EINVAL; + } + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + + pclk = clk_get(&pdev->dev, "isi_clk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + + isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL); + if (!isi) { + ret = -ENOMEM; + dev_err(&pdev->dev, "Can't allocate interface!\n"); + goto err_alloc_isi; + } + + isi->pclk = pclk; + isi->pdata = pdata; + isi->active = NULL; + spin_lock_init(&isi->lock); + init_waitqueue_head(&isi->vsync_wq); + INIT_LIST_HEAD(&isi->video_buffer_list); + INIT_LIST_HEAD(&isi->dma_desc_head); + + isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, + sizeof(struct fbd) * MAX_BUFFER_NUM, + &isi->fb_descriptors_phys, + GFP_KERNEL); + if (!isi->p_fb_descriptors) { + ret = -ENOMEM; + dev_err(&pdev->dev, "Can't allocate descriptors!\n"); + goto err_alloc_descriptors; + } + + for (i = 0; i < MAX_BUFFER_NUM; i++) { + isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i; + isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys + + i * sizeof(struct fbd); + list_add(&isi->dma_desc[i].list, &isi->dma_desc_head); + } + + isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(isi->alloc_ctx)) { + ret = PTR_ERR(isi->alloc_ctx); + goto err_alloc_ctx; + } + + isi->regs = ioremap(regs->start, resource_size(regs)); + if (!isi->regs) { + ret = -ENOMEM; + goto err_ioremap; + } + + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err_req_irq; + } + + ret = request_irq(irq, isi_interrupt, 0, "isi", isi); + if (ret) { + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); + goto err_req_irq; + } + isi->irq = irq; + + soc_host = &isi->soc_host; + soc_host->drv_name = "isi-camera"; + soc_host->ops = &isi_soc_camera_host_ops; + soc_host->priv = isi; + soc_host->v4l2_dev.dev = &pdev->dev; + soc_host->nr = pdev->id; + + ret = soc_camera_host_register(soc_host); + if (ret) { + dev_err(&pdev->dev, "Unable to register soc camera host\n"); + goto err_register_soc_camera_host; + } + return 0; + +err_register_soc_camera_host: + free_irq(isi->irq, isi); +err_req_irq: + iounmap(isi->regs); +err_ioremap: + vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); +err_alloc_ctx: + dma_free_coherent(&pdev->dev, + sizeof(struct fbd) * MAX_BUFFER_NUM, + isi->p_fb_descriptors, + isi->fb_descriptors_phys); +err_alloc_descriptors: + kfree(isi); +err_alloc_isi: + clk_put(isi->pclk); + + return ret; +} + +static struct platform_driver atmel_isi_driver = { + .probe = atmel_isi_probe, + .remove = __devexit_p(atmel_isi_remove), + .driver = { + .name = "atmel_isi", + .owner = THIS_MODULE, + }, +}; + +static int __init atmel_isi_init_module(void) +{ + return platform_driver_probe(&atmel_isi_driver, &atmel_isi_probe); +} + +static void __exit atmel_isi_exit(void) +{ + platform_driver_unregister(&atmel_isi_driver); +} +module_init(atmel_isi_init_module); +module_exit(atmel_isi_exit); + +MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>"); +MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("video"); diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index ca342e4..1e4ce506 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -292,3 +292,4 @@ module_exit(au0828_exit); MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.2"); diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c index c03eb29..0b3e481 100644 --- a/drivers/media/video/au0828/au0828-video.c +++ b/drivers/media/video/au0828/au0828-video.c @@ -33,7 +33,6 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/suspend.h> -#include <linux/version.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-chip-ident.h> @@ -43,8 +42,6 @@ static DEFINE_MUTEX(au0828_sysfs_lock); -#define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1) - /* ------------------------------------------------------------------ Videobuf operations ------------------------------------------------------------------*/ @@ -1254,8 +1251,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, dev->board.name, sizeof(cap->card)); strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); - cap->version = AU0828_VERSION_CODE; - /*set the device capabilities */ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE | diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 3c9e6c7..5b15f63 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -2892,13 +2892,10 @@ void __devinit bttv_idcard(struct bttv *btv) { unsigned int gpiobits; int i,type; - unsigned short tmp; /* read PCI subsystem ID */ - pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp); - btv->cardid = tmp << 16; - pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp); - btv->cardid |= tmp; + btv->cardid = btv->c.pci->subsystem_device << 16; + btv->cardid |= btv->c.pci->subsystem_vendor; if (0 != btv->cardid && 0xffffffff != btv->cardid) { /* look for the card */ diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 834a483..14444de 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -57,6 +57,7 @@ #include <media/saa6588.h> +#define BTTV_VERSION "0.9.19" unsigned int bttv_num; /* number of Bt848s in use */ struct bttv *bttvs[BTTV_MAX]; @@ -163,6 +164,7 @@ MODULE_PARM_DESC(radio_nr, "radio device numbers"); MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards"); MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr"); MODULE_LICENSE("GPL"); +MODULE_VERSION(BTTV_VERSION); /* ----------------------------------------------------------------------- */ /* sysfs */ @@ -2616,7 +2618,6 @@ static int bttv_querycap(struct file *file, void *priv, strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card)); snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", pci_name(btv->c.pci)); - cap->version = BTTV_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE | @@ -3416,7 +3417,6 @@ static int radio_querycap(struct file *file, void *priv, strcpy(cap->driver, "bttv"); strlcpy(cap->card, btv->radio_dev->name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(btv->c.pci)); - cap->version = BTTV_VERSION_CODE; cap->capabilities = V4L2_CAP_TUNER; return 0; @@ -4585,14 +4585,8 @@ static int __init bttv_init_module(void) bttv_num = 0; - printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n", - (BTTV_VERSION_CODE >> 16) & 0xff, - (BTTV_VERSION_CODE >> 8) & 0xff, - BTTV_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "bttv: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "bttv: driver version %s loaded\n", + BTTV_VERSION); if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME) gbuffers = 2; if (gbufsize > BTTV_MAX_FBUF) diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 9b776fa..318edf2 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -25,9 +25,6 @@ #ifndef _BTTVP_H_ #define _BTTVP_H_ -#include <linux/version.h> -#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,18) - #include <linux/types.h> #include <linux/wait.h> #include <linux/i2c.h> diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index c119350..f09df9d 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -71,7 +71,6 @@ OTHER DEALINGS IN THE SOFTWARE. #include <linux/mm.h> #include <linux/parport.h> #include <linux/sched.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/mutex.h> #include <asm/uaccess.h> @@ -647,7 +646,6 @@ static int qcam_querycap(struct file *file, void *priv, strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card)); strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); - vcap->version = KERNEL_VERSION(0, 0, 2); vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; return 0; } @@ -895,6 +893,7 @@ static struct qcam *qcam_init(struct parport *port) if (v4l2_device_register(NULL, v4l2_dev) < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + kfree(qcam); return NULL; } @@ -1092,3 +1091,4 @@ module_init(init_bw_qcams); module_exit(exit_bw_qcams); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.3"); diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 24fc009..cd8ff04 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -35,7 +35,6 @@ #include <linux/sched.h> #include <linux/mutex.h> #include <linux/jiffies.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <asm/uaccess.h> #include <media/v4l2-device.h> @@ -517,7 +516,6 @@ static int qcam_querycap(struct file *file, void *priv, strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver)); strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card)); strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); - vcap->version = KERNEL_VERSION(0, 0, 3); vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; return 0; } @@ -752,6 +750,7 @@ static struct qcam *qcam_init(struct parport *port) if (v4l2_device_register(NULL, v4l2_dev) < 0) { v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); + kfree(qcam); return NULL; } @@ -886,6 +885,7 @@ static void __exit cqcam_cleanup(void) MODULE_AUTHOR("Philip Blundell <philb@gnu.org>"); MODULE_DESCRIPTION(BANNER); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.4"); module_init(cqcam_init); module_exit(cqcam_cleanup); diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h deleted file mode 100644 index 8e2a87c..0000000 --- a/drivers/media/video/cafe_ccic-regs.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Register definitions for the m88alp01 camera interface. Offsets in bytes - * as given in the spec. - * - * Copyright 2006 One Laptop Per Child Association, Inc. - * - * Written by Jonathan Corbet, corbet@lwn.net. - * - * This file may be distributed under the terms of the GNU General - * Public License, version 2. - */ -#define REG_Y0BAR 0x00 -#define REG_Y1BAR 0x04 -#define REG_Y2BAR 0x08 -/* ... */ - -#define REG_IMGPITCH 0x24 /* Image pitch register */ -#define IMGP_YP_SHFT 2 /* Y pitch params */ -#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ -#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ -#define IMGP_UVP_MASK 0x3ffc0000 -#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ -#define IRQ_EOF0 0x00000001 /* End of frame 0 */ -#define IRQ_EOF1 0x00000002 /* End of frame 1 */ -#define IRQ_EOF2 0x00000004 /* End of frame 2 */ -#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ -#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ -#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ -#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ -#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ -#define IRQ_TWSIR 0x00020000 /* TWSI read */ -#define IRQ_TWSIE 0x00040000 /* TWSI error */ -#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) -#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) -#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) -#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ -#define REG_IRQSTAT 0x30 /* IRQ status / clear */ - -#define REG_IMGSIZE 0x34 /* Image size */ -#define IMGSZ_V_MASK 0x1fff0000 -#define IMGSZ_V_SHIFT 16 -#define IMGSZ_H_MASK 0x00003fff -#define REG_IMGOFFSET 0x38 /* IMage offset */ - -#define REG_CTRL0 0x3c /* Control 0 */ -#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ - -/* Mask for all the format bits */ -#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ - -/* RGB ordering */ -#define C0_RGB4_RGBX 0x00000000 -#define C0_RGB4_XRGB 0x00000004 -#define C0_RGB4_BGRX 0x00000008 -#define C0_RGB4_XBGR 0x0000000c -#define C0_RGB5_RGGB 0x00000000 -#define C0_RGB5_GRBG 0x00000004 -#define C0_RGB5_GBRG 0x00000008 -#define C0_RGB5_BGGR 0x0000000c - -/* Spec has two fields for DIN and DOUT, but they must match, so - combine them here. */ -#define C0_DF_YUV 0x00000000 /* Data is YUV */ -#define C0_DF_RGB 0x000000a0 /* ... RGB */ -#define C0_DF_BAYER 0x00000140 /* ... Bayer */ -/* 8-8-8 must be missing from the below - ask */ -#define C0_RGBF_565 0x00000000 -#define C0_RGBF_444 0x00000800 -#define C0_RGB_BGR 0x00001000 /* Blue comes first */ -#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ -#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ -#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ -/* Think that 420 packed must be 111 - ask */ -#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ -#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ -#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ -#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ -#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ -#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ -#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ -#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ -/* Bayer bits 18,19 if needed */ -#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ -#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ -#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ -#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ -#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ -#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ -#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ - - -#define REG_CTRL1 0x40 /* Control 1 */ -#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ -#define C1_ALPHA_SHFT 20 -#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ -#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ -#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ -#define C1_DMAB_MASK 0x06000000 -#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ -#define C1_PWRDWN 0x10000000 /* Power down */ - -#define REG_CLKCTRL 0x88 /* Clock control */ -#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ - -#define REG_GPR 0xb4 /* General purpose register. This - controls inputs to the power and reset - pins on the OV7670 used with OLPC; - other deployments could differ. */ -#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ -#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ -#define GPR_C1 0x00000002 /* Control 1 value */ -/* - * Control 0 is wired to reset on OLPC machines. For ov7x sensors, - * it is active low, for 0v6x, instead, it's active high. What - * fun. - */ -#define GPR_C0 0x00000001 /* Control 0 value */ - -#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ -#define TWSIC0_EN 0x00000001 /* TWSI enable */ -#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ -#define TWSIC0_SID 0x000003fc /* Slave ID */ -#define TWSIC0_SID_SHIFT 2 -#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ -#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ -#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ - -#define REG_TWSIC1 0xbc /* TWSI control 1 */ -#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ -#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ -#define TWSIC1_ADDR_SHIFT 16 -#define TWSIC1_READ 0x01000000 /* Set for read op */ -#define TWSIC1_WSTAT 0x02000000 /* Write status */ -#define TWSIC1_RVALID 0x04000000 /* Read data valid */ -#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ - - -#define REG_UBAR 0xc4 /* Upper base address register */ - -/* - * Here's the weird global control registers which are said to live - * way up here. - */ -#define REG_GL_CSR 0x3004 /* Control/status register */ -#define GCSR_SRS 0x00000001 /* SW Reset set */ -#define GCSR_SRC 0x00000002 /* SW Reset clear */ -#define GCSR_MRS 0x00000004 /* Master reset set */ -#define GCSR_MRC 0x00000008 /* HW Reset clear */ -#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ -#define REG_GL_IMASK 0x300c /* Interrupt mask register */ -#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ - -#define REG_GL_FCR 0x3038 /* GPIO functional control register */ -#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ -#define REG_GL_GPIOR 0x315c /* GPIO register */ -#define GGPIO_OUT 0x80000 /* GPIO output */ -#define GGPIO_VAL 0x00008 /* Output pin value */ - -#define REG_LEN REG_GL_IMASK + 4 - - -/* - * Useful stuff that probably belongs somewhere global. - */ -#define VGA_WIDTH 640 -#define VGA_HEIGHT 480 diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c deleted file mode 100644 index 6647033..0000000 --- a/drivers/media/video/cafe_ccic.c +++ /dev/null @@ -1,2267 +0,0 @@ -/* - * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe" - * multifunction chip. Currently works with the Omnivision OV7670 - * sensor. - * - * The data sheet for this device can be found at: - * http://www.marvell.com/products/pc_connectivity/88alp01/ - * - * Copyright 2006 One Laptop Per Child Association, Inc. - * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> - * - * Written by Jonathan Corbet, corbet@lwn.net. - * - * v4l2_device/v4l2_subdev conversion by: - * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl> - * - * Note: this conversion is untested! Please contact the linux-media - * mailinglist if you can test this, together with the test results. - * - * This file may be distributed under the terms of the GNU General - * Public License, version 2. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/dmi.h> -#include <linux/mm.h> -#include <linux/pci.h> -#include <linux/i2c.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/videodev2.h> -#include <linux/slab.h> -#include <media/v4l2-device.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-chip-ident.h> -#include <linux/device.h> -#include <linux/wait.h> -#include <linux/list.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/jiffies.h> -#include <linux/vmalloc.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#include "ov7670.h" -#include "cafe_ccic-regs.h" - -#define CAFE_VERSION 0x000002 - - -/* - * Parameters. - */ -MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); -MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("Video"); - -/* - * Internal DMA buffer management. Since the controller cannot do S/G I/O, - * we must have physically contiguous buffers to bring frames into. - * These parameters control how many buffers we use, whether we - * allocate them at load time (better chance of success, but nails down - * memory) or when somebody tries to use the camera (riskier), and, - * for load-time allocation, how big they should be. - * - * The controller can cycle through three buffers. We could use - * more by flipping pointers around, but it probably makes little - * sense. - */ - -#define MAX_DMA_BUFS 3 -static int alloc_bufs_at_read; -module_param(alloc_bufs_at_read, bool, 0444); -MODULE_PARM_DESC(alloc_bufs_at_read, - "Non-zero value causes DMA buffers to be allocated when the " - "video capture device is read, rather than at module load " - "time. This saves memory, but decreases the chances of " - "successfully getting those buffers."); - -static int n_dma_bufs = 3; -module_param(n_dma_bufs, uint, 0644); -MODULE_PARM_DESC(n_dma_bufs, - "The number of DMA buffers to allocate. Can be either two " - "(saves memory, makes timing tighter) or three."); - -static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ -module_param(dma_buf_size, uint, 0444); -MODULE_PARM_DESC(dma_buf_size, - "The size of the allocated DMA buffers. If actual operating " - "parameters require larger buffers, an attempt to reallocate " - "will be made."); - -static int min_buffers = 1; -module_param(min_buffers, uint, 0644); -MODULE_PARM_DESC(min_buffers, - "The minimum number of streaming I/O buffers we are willing " - "to work with."); - -static int max_buffers = 10; -module_param(max_buffers, uint, 0644); -MODULE_PARM_DESC(max_buffers, - "The maximum number of streaming I/O buffers an application " - "will be allowed to allocate. These buffers are big and live " - "in vmalloc space."); - -static int flip; -module_param(flip, bool, 0444); -MODULE_PARM_DESC(flip, - "If set, the sensor will be instructed to flip the image " - "vertically."); - - -enum cafe_state { - S_NOTREADY, /* Not yet initialized */ - S_IDLE, /* Just hanging around */ - S_FLAKED, /* Some sort of problem */ - S_SINGLEREAD, /* In read() */ - S_SPECREAD, /* Speculative read (for future read()) */ - S_STREAMING /* Streaming data */ -}; - -/* - * Tracking of streaming I/O buffers. - */ -struct cafe_sio_buffer { - struct list_head list; - struct v4l2_buffer v4lbuf; - char *buffer; /* Where it lives in kernel space */ - int mapcount; - struct cafe_camera *cam; -}; - -/* - * A description of one of our devices. - * Locking: controlled by s_mutex. Certain fields, however, require - * the dev_lock spinlock; they are marked as such by comments. - * dev_lock is also required for access to device registers. - */ -struct cafe_camera -{ - struct v4l2_device v4l2_dev; - enum cafe_state state; - unsigned long flags; /* Buffer status, mainly (dev_lock) */ - int users; /* How many open FDs */ - struct file *owner; /* Who has data access (v4l2) */ - - /* - * Subsystem structures. - */ - struct pci_dev *pdev; - struct video_device vdev; - struct i2c_adapter i2c_adapter; - struct v4l2_subdev *sensor; - unsigned short sensor_addr; - - unsigned char __iomem *regs; - struct list_head dev_list; /* link to other devices */ - - /* DMA buffers */ - unsigned int nbufs; /* How many are alloc'd */ - int next_buf; /* Next to consume (dev_lock) */ - unsigned int dma_buf_size; /* allocated size */ - void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ - dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ - unsigned int specframes; /* Unconsumed spec frames (dev_lock) */ - unsigned int sequence; /* Frame sequence number */ - unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual buffers */ - - /* Streaming buffers */ - unsigned int n_sbufs; /* How many we have */ - struct cafe_sio_buffer *sb_bufs; /* The array of housekeeping structs */ - struct list_head sb_avail; /* Available for data (we own) (dev_lock) */ - struct list_head sb_full; /* With data (user space owns) (dev_lock) */ - struct tasklet_struct s_tasklet; - - /* Current operating parameters */ - u32 sensor_type; /* Currently ov7670 only */ - struct v4l2_pix_format pix_format; - enum v4l2_mbus_pixelcode mbus_code; - - /* Locks */ - struct mutex s_mutex; /* Access to this structure */ - spinlock_t dev_lock; /* Access to device */ - - /* Misc */ - wait_queue_head_t smbus_wait; /* Waiting on i2c events */ - wait_queue_head_t iowait; /* Waiting on frame data */ -}; - -/* - * Status flags. Always manipulated with bit operations. - */ -#define CF_BUF0_VALID 0 /* Buffers valid - first three */ -#define CF_BUF1_VALID 1 -#define CF_BUF2_VALID 2 -#define CF_DMA_ACTIVE 3 /* A frame is incoming */ -#define CF_CONFIG_NEEDED 4 /* Must configure hardware */ - -#define sensor_call(cam, o, f, args...) \ - v4l2_subdev_call(cam->sensor, o, f, ##args) - -static inline struct cafe_camera *to_cam(struct v4l2_device *dev) -{ - return container_of(dev, struct cafe_camera, v4l2_dev); -} - -static struct cafe_format_struct { - __u8 *desc; - __u32 pixelformat; - int bpp; /* Bytes per pixel */ - enum v4l2_mbus_pixelcode mbus_code; -} cafe_formats[] = { - { - .desc = "YUYV 4:2:2", - .pixelformat = V4L2_PIX_FMT_YUYV, - .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, - .bpp = 2, - }, - { - .desc = "RGB 444", - .pixelformat = V4L2_PIX_FMT_RGB444, - .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, - .bpp = 2, - }, - { - .desc = "RGB 565", - .pixelformat = V4L2_PIX_FMT_RGB565, - .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, - .bpp = 2, - }, - { - .desc = "Raw RGB Bayer", - .pixelformat = V4L2_PIX_FMT_SBGGR8, - .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8, - .bpp = 1 - }, -}; -#define N_CAFE_FMTS ARRAY_SIZE(cafe_formats) - -static struct cafe_format_struct *cafe_find_format(u32 pixelformat) -{ - unsigned i; - - for (i = 0; i < N_CAFE_FMTS; i++) - if (cafe_formats[i].pixelformat == pixelformat) - return cafe_formats + i; - /* Not found? Then return the first format. */ - return cafe_formats; -} - -/* - * Start over with DMA buffers - dev_lock needed. - */ -static void cafe_reset_buffers(struct cafe_camera *cam) -{ - int i; - - cam->next_buf = -1; - for (i = 0; i < cam->nbufs; i++) - clear_bit(i, &cam->flags); - cam->specframes = 0; -} - -static inline int cafe_needs_config(struct cafe_camera *cam) -{ - return test_bit(CF_CONFIG_NEEDED, &cam->flags); -} - -static void cafe_set_config_needed(struct cafe_camera *cam, int needed) -{ - if (needed) - set_bit(CF_CONFIG_NEEDED, &cam->flags); - else - clear_bit(CF_CONFIG_NEEDED, &cam->flags); -} - - - - -/* - * Debugging and related. - */ -#define cam_err(cam, fmt, arg...) \ - dev_err(&(cam)->pdev->dev, fmt, ##arg); -#define cam_warn(cam, fmt, arg...) \ - dev_warn(&(cam)->pdev->dev, fmt, ##arg); -#define cam_dbg(cam, fmt, arg...) \ - dev_dbg(&(cam)->pdev->dev, fmt, ##arg); - - -/* ---------------------------------------------------------------------*/ - -/* - * Device register I/O - */ -static inline void cafe_reg_write(struct cafe_camera *cam, unsigned int reg, - unsigned int val) -{ - iowrite32(val, cam->regs + reg); -} - -static inline unsigned int cafe_reg_read(struct cafe_camera *cam, - unsigned int reg) -{ - return ioread32(cam->regs + reg); -} - - -static inline void cafe_reg_write_mask(struct cafe_camera *cam, unsigned int reg, - unsigned int val, unsigned int mask) -{ - unsigned int v = cafe_reg_read(cam, reg); - - v = (v & ~mask) | (val & mask); - cafe_reg_write(cam, reg, v); -} - -static inline void cafe_reg_clear_bit(struct cafe_camera *cam, - unsigned int reg, unsigned int val) -{ - cafe_reg_write_mask(cam, reg, 0, val); -} - -static inline void cafe_reg_set_bit(struct cafe_camera *cam, - unsigned int reg, unsigned int val) -{ - cafe_reg_write_mask(cam, reg, val, val); -} - - - -/* -------------------------------------------------------------------- */ -/* - * The I2C/SMBUS interface to the camera itself starts here. The - * controller handles SMBUS itself, presenting a relatively simple register - * interface; all we have to do is to tell it where to route the data. - */ -#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */ - -static int cafe_smbus_write_done(struct cafe_camera *cam) -{ - unsigned long flags; - int c1; - - /* - * We must delay after the interrupt, or the controller gets confused - * and never does give us good status. Fortunately, we don't do this - * often. - */ - udelay(20); - spin_lock_irqsave(&cam->dev_lock, flags); - c1 = cafe_reg_read(cam, REG_TWSIC1); - spin_unlock_irqrestore(&cam->dev_lock, flags); - return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT; -} - -static int cafe_smbus_write_data(struct cafe_camera *cam, - u16 addr, u8 command, u8 value) -{ - unsigned int rval; - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); - rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ - /* - * Marvell sez set clkdiv to all 1's for now. - */ - rval |= TWSIC0_CLKDIV; - cafe_reg_write(cam, REG_TWSIC0, rval); - (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */ - rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); - cafe_reg_write(cam, REG_TWSIC1, rval); - spin_unlock_irqrestore(&cam->dev_lock, flags); - - /* Unfortunately, reading TWSIC1 too soon after sending a command - * causes the device to die. - * Use a busy-wait because we often send a large quantity of small - * commands at-once; using msleep() would cause a lot of context - * switches which take longer than 2ms, resulting in a noticeable - * boot-time and capture-start delays. - */ - mdelay(2); - - /* - * Another sad fact is that sometimes, commands silently complete but - * cafe_smbus_write_done() never becomes aware of this. - * This happens at random and appears to possible occur with any - * command. - * We don't understand why this is. We work around this issue - * with the timeout in the wait below, assuming that all commands - * complete within the timeout. - */ - wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam), - CAFE_SMBUS_TIMEOUT); - - spin_lock_irqsave(&cam->dev_lock, flags); - rval = cafe_reg_read(cam, REG_TWSIC1); - spin_unlock_irqrestore(&cam->dev_lock, flags); - - if (rval & TWSIC1_WSTAT) { - cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr, - command, value); - return -EIO; - } - if (rval & TWSIC1_ERROR) { - cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr, - command, value); - return -EIO; - } - return 0; -} - - - -static int cafe_smbus_read_done(struct cafe_camera *cam) -{ - unsigned long flags; - int c1; - - /* - * We must delay after the interrupt, or the controller gets confused - * and never does give us good status. Fortunately, we don't do this - * often. - */ - udelay(20); - spin_lock_irqsave(&cam->dev_lock, flags); - c1 = cafe_reg_read(cam, REG_TWSIC1); - spin_unlock_irqrestore(&cam->dev_lock, flags); - return c1 & (TWSIC1_RVALID|TWSIC1_ERROR); -} - - - -static int cafe_smbus_read_data(struct cafe_camera *cam, - u16 addr, u8 command, u8 *value) -{ - unsigned int rval; - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); - rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ - /* - * Marvel sez set clkdiv to all 1's for now. - */ - rval |= TWSIC0_CLKDIV; - cafe_reg_write(cam, REG_TWSIC0, rval); - (void) cafe_reg_read(cam, REG_TWSIC1); /* force write */ - rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); - cafe_reg_write(cam, REG_TWSIC1, rval); - spin_unlock_irqrestore(&cam->dev_lock, flags); - - wait_event_timeout(cam->smbus_wait, - cafe_smbus_read_done(cam), CAFE_SMBUS_TIMEOUT); - spin_lock_irqsave(&cam->dev_lock, flags); - rval = cafe_reg_read(cam, REG_TWSIC1); - spin_unlock_irqrestore(&cam->dev_lock, flags); - - if (rval & TWSIC1_ERROR) { - cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command); - return -EIO; - } - if (! (rval & TWSIC1_RVALID)) { - cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr, - command); - return -EIO; - } - *value = rval & 0xff; - return 0; -} - -/* - * Perform a transfer over SMBUS. This thing is called under - * the i2c bus lock, so we shouldn't race with ourselves... - */ -static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr, - unsigned short flags, char rw, u8 command, - int size, union i2c_smbus_data *data) -{ - struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter); - struct cafe_camera *cam = to_cam(v4l2_dev); - int ret = -EINVAL; - - /* - * This interface would appear to only do byte data ops. OK - * it can do word too, but the cam chip has no use for that. - */ - if (size != I2C_SMBUS_BYTE_DATA) { - cam_err(cam, "funky xfer size %d\n", size); - return -EINVAL; - } - - if (rw == I2C_SMBUS_WRITE) - ret = cafe_smbus_write_data(cam, addr, command, data->byte); - else if (rw == I2C_SMBUS_READ) - ret = cafe_smbus_read_data(cam, addr, command, &data->byte); - return ret; -} - - -static void cafe_smbus_enable_irq(struct cafe_camera *cam) -{ - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_reg_set_bit(cam, REG_IRQMASK, TWSIIRQS); - spin_unlock_irqrestore(&cam->dev_lock, flags); -} - -static u32 cafe_smbus_func(struct i2c_adapter *adapter) -{ - return I2C_FUNC_SMBUS_READ_BYTE_DATA | - I2C_FUNC_SMBUS_WRITE_BYTE_DATA; -} - -static struct i2c_algorithm cafe_smbus_algo = { - .smbus_xfer = cafe_smbus_xfer, - .functionality = cafe_smbus_func -}; - -/* Somebody is on the bus */ -static void cafe_ctlr_stop_dma(struct cafe_camera *cam); -static void cafe_ctlr_power_down(struct cafe_camera *cam); - -static int cafe_smbus_setup(struct cafe_camera *cam) -{ - struct i2c_adapter *adap = &cam->i2c_adapter; - int ret; - - cafe_smbus_enable_irq(cam); - adap->owner = THIS_MODULE; - adap->algo = &cafe_smbus_algo; - strcpy(adap->name, "cafe_ccic"); - adap->dev.parent = &cam->pdev->dev; - i2c_set_adapdata(adap, &cam->v4l2_dev); - ret = i2c_add_adapter(adap); - if (ret) - printk(KERN_ERR "Unable to register cafe i2c adapter\n"); - return ret; -} - -static void cafe_smbus_shutdown(struct cafe_camera *cam) -{ - i2c_del_adapter(&cam->i2c_adapter); -} - - -/* ------------------------------------------------------------------- */ -/* - * Deal with the controller. - */ - -/* - * Do everything we think we need to have the interface operating - * according to the desired format. - */ -static void cafe_ctlr_dma(struct cafe_camera *cam) -{ - /* - * Store the first two Y buffers (we aren't supporting - * planar formats for now, so no UV bufs). Then either - * set the third if it exists, or tell the controller - * to just use two. - */ - cafe_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]); - cafe_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]); - if (cam->nbufs > 2) { - cafe_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]); - cafe_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS); - } - else - cafe_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); - cafe_reg_write(cam, REG_UBAR, 0); /* 32 bits only for now */ -} - -static void cafe_ctlr_image(struct cafe_camera *cam) -{ - int imgsz; - struct v4l2_pix_format *fmt = &cam->pix_format; - - imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | - (fmt->bytesperline & IMGSZ_H_MASK); - cafe_reg_write(cam, REG_IMGSIZE, imgsz); - cafe_reg_write(cam, REG_IMGOFFSET, 0); - /* YPITCH just drops the last two bits */ - cafe_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, - IMGP_YP_MASK); - /* - * Tell the controller about the image format we are using. - */ - switch (cam->pix_format.pixelformat) { - case V4L2_PIX_FMT_YUYV: - cafe_reg_write_mask(cam, REG_CTRL0, - C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, - C0_DF_MASK); - break; - - case V4L2_PIX_FMT_RGB444: - cafe_reg_write_mask(cam, REG_CTRL0, - C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, - C0_DF_MASK); - /* Alpha value? */ - break; - - case V4L2_PIX_FMT_RGB565: - cafe_reg_write_mask(cam, REG_CTRL0, - C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, - C0_DF_MASK); - break; - - default: - cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); - break; - } - /* - * Make sure it knows we want to use hsync/vsync. - */ - cafe_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, - C0_SIFM_MASK); -} - - -/* - * Configure the controller for operation; caller holds the - * device mutex. - */ -static int cafe_ctlr_configure(struct cafe_camera *cam) -{ - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_ctlr_dma(cam); - cafe_ctlr_image(cam); - cafe_set_config_needed(cam, 0); - spin_unlock_irqrestore(&cam->dev_lock, flags); - return 0; -} - -static void cafe_ctlr_irq_enable(struct cafe_camera *cam) -{ - /* - * Clear any pending interrupts, since we do not - * expect to have I/O active prior to enabling. - */ - cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); - cafe_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS); -} - -static void cafe_ctlr_irq_disable(struct cafe_camera *cam) -{ - cafe_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS); -} - -/* - * Make the controller start grabbing images. Everything must - * be set up before doing this. - */ -static void cafe_ctlr_start(struct cafe_camera *cam) -{ - /* set_bit performs a read, so no other barrier should be - needed here */ - cafe_reg_set_bit(cam, REG_CTRL0, C0_ENABLE); -} - -static void cafe_ctlr_stop(struct cafe_camera *cam) -{ - cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); -} - -static void cafe_ctlr_init(struct cafe_camera *cam) -{ - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - /* - * Added magic to bring up the hardware on the B-Test board - */ - cafe_reg_write(cam, 0x3038, 0x8); - cafe_reg_write(cam, 0x315c, 0x80008); - /* - * Go through the dance needed to wake the device up. - * Note that these registers are global and shared - * with the NAND and SD devices. Interaction between the - * three still needs to be examined. - */ - cafe_reg_write(cam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */ - cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRC); - cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRS); - /* - * Here we must wait a bit for the controller to come around. - */ - spin_unlock_irqrestore(&cam->dev_lock, flags); - msleep(5); - spin_lock_irqsave(&cam->dev_lock, flags); - - cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); - cafe_reg_set_bit(cam, REG_GL_IMASK, GIMSK_CCIC_EN); - /* - * Make sure it's not powered down. - */ - cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); - /* - * Turn off the enable bit. It sure should be off anyway, - * but it's good to be sure. - */ - cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); - /* - * Mask all interrupts. - */ - cafe_reg_write(cam, REG_IRQMASK, 0); - /* - * Clock the sensor appropriately. Controller clock should - * be 48MHz, sensor "typical" value is half that. - */ - cafe_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK); - spin_unlock_irqrestore(&cam->dev_lock, flags); -} - - -/* - * Stop the controller, and don't return until we're really sure that no - * further DMA is going on. - */ -static void cafe_ctlr_stop_dma(struct cafe_camera *cam) -{ - unsigned long flags; - - /* - * Theory: stop the camera controller (whether it is operating - * or not). Delay briefly just in case we race with the SOF - * interrupt, then wait until no DMA is active. - */ - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_ctlr_stop(cam); - spin_unlock_irqrestore(&cam->dev_lock, flags); - mdelay(1); - wait_event_timeout(cam->iowait, - !test_bit(CF_DMA_ACTIVE, &cam->flags), HZ); - if (test_bit(CF_DMA_ACTIVE, &cam->flags)) - cam_err(cam, "Timeout waiting for DMA to end\n"); - /* This would be bad news - what now? */ - spin_lock_irqsave(&cam->dev_lock, flags); - cam->state = S_IDLE; - cafe_ctlr_irq_disable(cam); - spin_unlock_irqrestore(&cam->dev_lock, flags); -} - -/* - * Power up and down. - */ -static void cafe_ctlr_power_up(struct cafe_camera *cam) -{ - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); - /* - * Part one of the sensor dance: turn the global - * GPIO signal on. - */ - cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON); - cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL); - /* - * Put the sensor into operational mode (assumes OLPC-style - * wiring). Control 0 is reset - set to 1 to operate. - * Control 1 is power down, set to 0 to operate. - */ - cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ -/* mdelay(1); */ /* Marvell says 1ms will do it */ - cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); -/* mdelay(1); */ /* Enough? */ - spin_unlock_irqrestore(&cam->dev_lock, flags); - msleep(5); /* Just to be sure */ -} - -static void cafe_ctlr_power_down(struct cafe_camera *cam) -{ - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); - cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON); - cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT); - cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); - spin_unlock_irqrestore(&cam->dev_lock, flags); -} - -/* -------------------------------------------------------------------- */ -/* - * Communications with the sensor. - */ - -static int __cafe_cam_reset(struct cafe_camera *cam) -{ - return sensor_call(cam, core, reset, 0); -} - -/* - * We have found the sensor on the i2c. Let's try to have a - * conversation. - */ -static int cafe_cam_init(struct cafe_camera *cam) -{ - struct v4l2_dbg_chip_ident chip; - int ret; - - mutex_lock(&cam->s_mutex); - if (cam->state != S_NOTREADY) - cam_warn(cam, "Cam init with device in funky state %d", - cam->state); - ret = __cafe_cam_reset(cam); - if (ret) - goto out; - chip.ident = V4L2_IDENT_NONE; - chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; - chip.match.addr = cam->sensor_addr; - ret = sensor_call(cam, core, g_chip_ident, &chip); - if (ret) - goto out; - cam->sensor_type = chip.ident; - if (cam->sensor_type != V4L2_IDENT_OV7670) { - cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type); - ret = -EINVAL; - goto out; - } -/* Get/set parameters? */ - ret = 0; - cam->state = S_IDLE; - out: - cafe_ctlr_power_down(cam); - mutex_unlock(&cam->s_mutex); - return ret; -} - -/* - * Configure the sensor to match the parameters we have. Caller should - * hold s_mutex - */ -static int cafe_cam_set_flip(struct cafe_camera *cam) -{ - struct v4l2_control ctrl; - - memset(&ctrl, 0, sizeof(ctrl)); - ctrl.id = V4L2_CID_VFLIP; - ctrl.value = flip; - return sensor_call(cam, core, s_ctrl, &ctrl); -} - - -static int cafe_cam_configure(struct cafe_camera *cam) -{ - struct v4l2_mbus_framefmt mbus_fmt; - int ret; - - v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code); - ret = sensor_call(cam, core, init, 0); - if (ret == 0) - ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt); - /* - * OV7670 does weird things if flip is set *before* format... - */ - ret += cafe_cam_set_flip(cam); - return ret; -} - -/* -------------------------------------------------------------------- */ -/* - * DMA buffer management. These functions need s_mutex held. - */ - -/* FIXME: this is inefficient as hell, since dma_alloc_coherent just - * does a get_free_pages() call, and we waste a good chunk of an orderN - * allocation. Should try to allocate the whole set in one chunk. - */ -static int cafe_alloc_dma_bufs(struct cafe_camera *cam, int loadtime) -{ - int i; - - cafe_set_config_needed(cam, 1); - if (loadtime) - cam->dma_buf_size = dma_buf_size; - else - cam->dma_buf_size = cam->pix_format.sizeimage; - if (n_dma_bufs > 3) - n_dma_bufs = 3; - - cam->nbufs = 0; - for (i = 0; i < n_dma_bufs; i++) { - cam->dma_bufs[i] = dma_alloc_coherent(&cam->pdev->dev, - cam->dma_buf_size, cam->dma_handles + i, - GFP_KERNEL); - if (cam->dma_bufs[i] == NULL) { - cam_warn(cam, "Failed to allocate DMA buffer\n"); - break; - } - /* For debug, remove eventually */ - memset(cam->dma_bufs[i], 0xcc, cam->dma_buf_size); - (cam->nbufs)++; - } - - switch (cam->nbufs) { - case 1: - dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size, - cam->dma_bufs[0], cam->dma_handles[0]); - cam->nbufs = 0; - case 0: - cam_err(cam, "Insufficient DMA buffers, cannot operate\n"); - return -ENOMEM; - - case 2: - if (n_dma_bufs > 2) - cam_warn(cam, "Will limp along with only 2 buffers\n"); - break; - } - return 0; -} - -static void cafe_free_dma_bufs(struct cafe_camera *cam) -{ - int i; - - for (i = 0; i < cam->nbufs; i++) { - dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size, - cam->dma_bufs[i], cam->dma_handles[i]); - cam->dma_bufs[i] = NULL; - } - cam->nbufs = 0; -} - - - - - -/* ----------------------------------------------------------------------- */ -/* - * Here starts the V4L2 interface code. - */ - -/* - * Read an image from the device. - */ -static ssize_t cafe_deliver_buffer(struct cafe_camera *cam, - char __user *buffer, size_t len, loff_t *pos) -{ - int bufno; - unsigned long flags; - - spin_lock_irqsave(&cam->dev_lock, flags); - if (cam->next_buf < 0) { - cam_err(cam, "deliver_buffer: No next buffer\n"); - spin_unlock_irqrestore(&cam->dev_lock, flags); - return -EIO; - } - bufno = cam->next_buf; - clear_bit(bufno, &cam->flags); - if (++(cam->next_buf) >= cam->nbufs) - cam->next_buf = 0; - if (! test_bit(cam->next_buf, &cam->flags)) - cam->next_buf = -1; - cam->specframes = 0; - spin_unlock_irqrestore(&cam->dev_lock, flags); - - if (len > cam->pix_format.sizeimage) - len = cam->pix_format.sizeimage; - if (copy_to_user(buffer, cam->dma_bufs[bufno], len)) - return -EFAULT; - (*pos) += len; - return len; -} - -/* - * Get everything ready, and start grabbing frames. - */ -static int cafe_read_setup(struct cafe_camera *cam, enum cafe_state state) -{ - int ret; - unsigned long flags; - - /* - * Configuration. If we still don't have DMA buffers, - * make one last, desperate attempt. - */ - if (cam->nbufs == 0) - if (cafe_alloc_dma_bufs(cam, 0)) - return -ENOMEM; - - if (cafe_needs_config(cam)) { - cafe_cam_configure(cam); - ret = cafe_ctlr_configure(cam); - if (ret) - return ret; - } - - /* - * Turn it loose. - */ - spin_lock_irqsave(&cam->dev_lock, flags); - cafe_reset_buffers(cam); - cafe_ctlr_irq_enable(cam); - cam->state = state; - cafe_ctlr_start(cam); - spin_unlock_irqrestore(&cam->dev_lock, flags); - return 0; -} - - -static ssize_t cafe_v4l_read(struct file *filp, - char __user *buffer, size_t len, loff_t *pos) -{ - struct cafe_camera *cam = filp->private_data; - int ret = 0; - - /* - * Perhaps we're in speculative read mode and already - * have data? - */ - mutex_lock(&cam->s_mutex); - if (cam->state == S_SPECREAD) { - if (cam->next_buf >= 0) { - ret = cafe_deliver_buffer(cam, buffer, len, pos); - if (ret != 0) - goto out_unlock; - } - } else if (cam->state == S_FLAKED || cam->state == S_NOTREADY) { - ret = -EIO; - goto out_unlock; - } else if (cam->state != S_IDLE) { - ret = -EBUSY; - goto out_unlock; - } - - /* - * v4l2: multiple processes can open the device, but only - * one gets to grab data from it. - */ - if (cam->owner && cam->owner != filp) { - ret = -EBUSY; - goto out_unlock; - } - cam->owner = filp; - - /* - * Do setup if need be. - */ - if (cam->state != S_SPECREAD) { - ret = cafe_read_setup(cam, S_SINGLEREAD); - if (ret) - goto out_unlock; - } - /* - * Wait for something to happen. This should probably - * be interruptible (FIXME). - */ - wait_event_timeout(cam->iowait, cam->next_buf >= 0, HZ); - if (cam->next_buf < 0) { - cam_err(cam, "read() operation timed out\n"); - cafe_ctlr_stop_dma(cam); - ret = -EIO; - goto out_unlock; - } - /* - * Give them their data and we should be done. - */ - ret = cafe_deliver_buffer(cam, buffer, len, pos); - - out_unlock: - mutex_unlock(&cam->s_mutex); - return ret; -} - - - - - - - - -/* - * Streaming I/O support. - */ - - - -static int cafe_vidioc_streamon(struct file *filp, void *priv, - enum v4l2_buf_type type) -{ - struct cafe_camera *cam = filp->private_data; - int ret = -EINVAL; - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - goto out; - mutex_lock(&cam->s_mutex); - if (cam->state != S_IDLE || cam->n_sbufs == 0) - goto out_unlock; - - cam->sequence = 0; - ret = cafe_read_setup(cam, S_STREAMING); - - out_unlock: - mutex_unlock(&cam->s_mutex); - out: - return ret; -} - - -static int cafe_vidioc_streamoff(struct file *filp, void *priv, - enum v4l2_buf_type type) -{ - struct cafe_camera *cam = filp->private_data; - int ret = -EINVAL; - - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - goto out; - mutex_lock(&cam->s_mutex); - if (cam->state != S_STREAMING) - goto out_unlock; - - cafe_ctlr_stop_dma(cam); - ret = 0; - - out_unlock: - mutex_unlock(&cam->s_mutex); - out: - return ret; -} - - - -static int cafe_setup_siobuf(struct cafe_camera *cam, int index) -{ - struct cafe_sio_buffer *buf = cam->sb_bufs + index; - - INIT_LIST_HEAD(&buf->list); - buf->v4lbuf.length = PAGE_ALIGN(cam->pix_format.sizeimage); - buf->buffer = vmalloc_user(buf->v4lbuf.length); - if (buf->buffer == NULL) - return -ENOMEM; - buf->mapcount = 0; - buf->cam = cam; - - buf->v4lbuf.index = index; - buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - buf->v4lbuf.field = V4L2_FIELD_NONE; - buf->v4lbuf.memory = V4L2_MEMORY_MMAP; - /* - * Offset: must be 32-bit even on a 64-bit system. videobuf-dma-sg - * just uses the length times the index, but the spec warns - * against doing just that - vma merging problems. So we - * leave a gap between each pair of buffers. - */ - buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length; - return 0; -} - -static int cafe_free_sio_buffers(struct cafe_camera *cam) -{ - int i; - - /* - * If any buffers are mapped, we cannot free them at all. - */ - for (i = 0; i < cam->n_sbufs; i++) - if (cam->sb_bufs[i].mapcount > 0) - return -EBUSY; - /* - * OK, let's do it. - */ - for (i = 0; i < cam->n_sbufs; i++) - vfree(cam->sb_bufs[i].buffer); - cam->n_sbufs = 0; - kfree(cam->sb_bufs); - cam->sb_bufs = NULL; - INIT_LIST_HEAD(&cam->sb_avail); - INIT_LIST_HEAD(&cam->sb_full); - return 0; -} - - - -static int cafe_vidioc_reqbufs(struct file *filp, void *priv, - struct v4l2_requestbuffers *req) -{ - struct cafe_camera *cam = filp->private_data; - int ret = 0; /* Silence warning */ - - /* - * Make sure it's something we can do. User pointers could be - * implemented without great pain, but that's not been done yet. - */ - if (req->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - /* - * If they ask for zero buffers, they really want us to stop streaming - * (if it's happening) and free everything. Should we check owner? - */ - mutex_lock(&cam->s_mutex); - if (req->count == 0) { - if (cam->state == S_STREAMING) - cafe_ctlr_stop_dma(cam); - ret = cafe_free_sio_buffers (cam); - goto out; - } - /* - * Device needs to be idle and working. We *could* try to do the - * right thing in S_SPECREAD by shutting things down, but it - * probably doesn't matter. - */ - if (cam->state != S_IDLE || (cam->owner && cam->owner != filp)) { - ret = -EBUSY; - goto out; - } - cam->owner = filp; - - if (req->count < min_buffers) - req->count = min_buffers; - else if (req->count > max_buffers) - req->count = max_buffers; - if (cam->n_sbufs > 0) { - ret = cafe_free_sio_buffers(cam); - if (ret) - goto out; - } - - cam->sb_bufs = kzalloc(req->count*sizeof(struct cafe_sio_buffer), - GFP_KERNEL); - if (cam->sb_bufs == NULL) { - ret = -ENOMEM; - goto out; - } - for (cam->n_sbufs = 0; cam->n_sbufs < req->count; (cam->n_sbufs++)) { - ret = cafe_setup_siobuf(cam, cam->n_sbufs); - if (ret) - break; - } - - if (cam->n_sbufs == 0) /* no luck at all - ret already set */ - kfree(cam->sb_bufs); - req->count = cam->n_sbufs; /* In case of partial success */ - - out: - mutex_unlock(&cam->s_mutex); - return ret; -} - - -static int cafe_vidioc_querybuf(struct file *filp, void *priv, - struct v4l2_buffer *buf) -{ - struct cafe_camera *cam = filp->private_data; - int ret = -EINVAL; - - mutex_lock(&cam->s_mutex); - if (buf->index >= cam->n_sbufs) - goto out; - *buf = cam->sb_bufs[buf->index].v4lbuf; - ret = 0; - out: - mutex_unlock(&cam->s_mutex); - return ret; -} - -static int cafe_vidioc_qbuf(struct file *filp, void *priv, - struct v4l2_buffer *buf) -{ - struct cafe_camera *cam = filp->private_data; - struct cafe_sio_buffer *sbuf; - int ret = -EINVAL; - unsigned long flags; - - mutex_lock(&cam->s_mutex); - if (buf->index >= cam->n_sbufs) - goto out; - sbuf = cam->sb_bufs + buf->index; - if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) { - ret = 0; /* Already queued?? */ - goto out; - } - if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_DONE) { - /* Spec doesn't say anything, seems appropriate tho */ - ret = -EBUSY; - goto out; - } - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED; - spin_lock_irqsave(&cam->dev_lock, flags); - list_add(&sbuf->list, &cam->sb_avail); - spin_unlock_irqrestore(&cam->dev_lock, flags); - ret = 0; - out: - mutex_unlock(&cam->s_mutex); - return ret; -} - -static int cafe_vidioc_dqbuf(struct file *filp, void *priv, - struct v4l2_buffer *buf) -{ - struct cafe_camera *cam = filp->private_data; - struct cafe_sio_buffer *sbuf; - int ret = -EINVAL; - unsigned long flags; - - mutex_lock(&cam->s_mutex); - if (cam->state != S_STREAMING) - goto out_unlock; - if (list_empty(&cam->sb_full) && filp->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - goto out_unlock; - } - - while (list_empty(&cam->sb_full) && cam->state == S_STREAMING) { - mutex_unlock(&cam->s_mutex); - if (wait_event_interruptible(cam->iowait, - !list_empty(&cam->sb_full))) { - ret = -ERESTARTSYS; - goto out; - } - mutex_lock(&cam->s_mutex); - } - - if (cam->state != S_STREAMING) - ret = -EINTR; - else { - spin_lock_irqsave(&cam->dev_lock, flags); - /* Should probably recheck !list_empty() here */ - sbuf = list_entry(cam->sb_full.next, - struct cafe_sio_buffer, list); - list_del_init(&sbuf->list); - spin_unlock_irqrestore(&cam->dev_lock, flags); - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE; - *buf = sbuf->v4lbuf; - ret = 0; - } - - out_unlock: - mutex_unlock(&cam->s_mutex); - out: - return ret; -} - - - -static void cafe_v4l_vm_open(struct vm_area_struct *vma) -{ - struct cafe_sio_buffer *sbuf = vma->vm_private_data; - /* - * Locking: done under mmap_sem, so we don't need to - * go back to the camera lock here. - */ - sbuf->mapcount++; -} - - -static void cafe_v4l_vm_close(struct vm_area_struct *vma) -{ - struct cafe_sio_buffer *sbuf = vma->vm_private_data; - - mutex_lock(&sbuf->cam->s_mutex); - sbuf->mapcount--; - /* Docs say we should stop I/O too... */ - if (sbuf->mapcount == 0) - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED; - mutex_unlock(&sbuf->cam->s_mutex); -} - -static const struct vm_operations_struct cafe_v4l_vm_ops = { - .open = cafe_v4l_vm_open, - .close = cafe_v4l_vm_close -}; - - -static int cafe_v4l_mmap(struct file *filp, struct vm_area_struct *vma) -{ - struct cafe_camera *cam = filp->private_data; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - int ret = -EINVAL; - int i; - struct cafe_sio_buffer *sbuf = NULL; - - if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED)) - return -EINVAL; - /* - * Find the buffer they are looking for. - */ - mutex_lock(&cam->s_mutex); - for (i = 0; i < cam->n_sbufs; i++) - if (cam->sb_bufs[i].v4lbuf.m.offset == offset) { - sbuf = cam->sb_bufs + i; - break; - } - if (sbuf == NULL) - goto out; - - ret = remap_vmalloc_range(vma, sbuf->buffer, 0); - if (ret) - goto out; - vma->vm_flags |= VM_DONTEXPAND; - vma->vm_private_data = sbuf; - vma->vm_ops = &cafe_v4l_vm_ops; - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED; - cafe_v4l_vm_open(vma); - ret = 0; - out: - mutex_unlock(&cam->s_mutex); - return ret; -} - - - -static int cafe_v4l_open(struct file *filp) -{ - struct cafe_camera *cam = video_drvdata(filp); - - filp->private_data = cam; - - mutex_lock(&cam->s_mutex); - if (cam->users == 0) { - cafe_ctlr_power_up(cam); - __cafe_cam_reset(cam); - cafe_set_config_needed(cam, 1); - /* FIXME make sure this is complete */ - } - (cam->users)++; - mutex_unlock(&cam->s_mutex); - return 0; -} - - -static int cafe_v4l_release(struct file *filp) -{ - struct cafe_camera *cam = filp->private_data; - - mutex_lock(&cam->s_mutex); - (cam->users)--; - if (filp == cam->owner) { - cafe_ctlr_stop_dma(cam); - cafe_free_sio_buffers(cam); - cam->owner = NULL; - } - if (cam->users == 0) { - cafe_ctlr_power_down(cam); - if (alloc_bufs_at_read) - cafe_free_dma_bufs(cam); - } - mutex_unlock(&cam->s_mutex); - return 0; -} - - - -static unsigned int cafe_v4l_poll(struct file *filp, - struct poll_table_struct *pt) -{ - struct cafe_camera *cam = filp->private_data; - - poll_wait(filp, &cam->iowait, pt); - if (cam->next_buf >= 0) - return POLLIN | POLLRDNORM; - return 0; -} - - - -static int cafe_vidioc_queryctrl(struct file *filp, void *priv, - struct v4l2_queryctrl *qc) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, core, queryctrl, qc); - mutex_unlock(&cam->s_mutex); - return ret; -} - - -static int cafe_vidioc_g_ctrl(struct file *filp, void *priv, - struct v4l2_control *ctrl) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, core, g_ctrl, ctrl); - mutex_unlock(&cam->s_mutex); - return ret; -} - - -static int cafe_vidioc_s_ctrl(struct file *filp, void *priv, - struct v4l2_control *ctrl) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, core, s_ctrl, ctrl); - mutex_unlock(&cam->s_mutex); - return ret; -} - - - - - -static int cafe_vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - strcpy(cap->driver, "cafe_ccic"); - strcpy(cap->card, "cafe_ccic"); - cap->version = CAFE_VERSION; - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; - return 0; -} - - -/* - * The default format we use until somebody says otherwise. - */ -static const struct v4l2_pix_format cafe_def_pix_format = { - .width = VGA_WIDTH, - .height = VGA_HEIGHT, - .pixelformat = V4L2_PIX_FMT_YUYV, - .field = V4L2_FIELD_NONE, - .bytesperline = VGA_WIDTH*2, - .sizeimage = VGA_WIDTH*VGA_HEIGHT*2, -}; - -static const enum v4l2_mbus_pixelcode cafe_def_mbus_code = - V4L2_MBUS_FMT_YUYV8_2X8; - -static int cafe_vidioc_enum_fmt_vid_cap(struct file *filp, - void *priv, struct v4l2_fmtdesc *fmt) -{ - if (fmt->index >= N_CAFE_FMTS) - return -EINVAL; - strlcpy(fmt->description, cafe_formats[fmt->index].desc, - sizeof(fmt->description)); - fmt->pixelformat = cafe_formats[fmt->index].pixelformat; - return 0; -} - -static int cafe_vidioc_try_fmt_vid_cap(struct file *filp, void *priv, - struct v4l2_format *fmt) -{ - struct cafe_camera *cam = priv; - struct cafe_format_struct *f; - struct v4l2_pix_format *pix = &fmt->fmt.pix; - struct v4l2_mbus_framefmt mbus_fmt; - int ret; - - f = cafe_find_format(pix->pixelformat); - pix->pixelformat = f->pixelformat; - v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code); - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt); - mutex_unlock(&cam->s_mutex); - v4l2_fill_pix_format(pix, &mbus_fmt); - pix->bytesperline = pix->width * f->bpp; - pix->sizeimage = pix->height * pix->bytesperline; - return ret; -} - -static int cafe_vidioc_s_fmt_vid_cap(struct file *filp, void *priv, - struct v4l2_format *fmt) -{ - struct cafe_camera *cam = priv; - struct cafe_format_struct *f; - int ret; - - /* - * Can't do anything if the device is not idle - * Also can't if there are streaming buffers in place. - */ - if (cam->state != S_IDLE || cam->n_sbufs > 0) - return -EBUSY; - - f = cafe_find_format(fmt->fmt.pix.pixelformat); - - /* - * See if the formatting works in principle. - */ - ret = cafe_vidioc_try_fmt_vid_cap(filp, priv, fmt); - if (ret) - return ret; - /* - * Now we start to change things for real, so let's do it - * under lock. - */ - mutex_lock(&cam->s_mutex); - cam->pix_format = fmt->fmt.pix; - cam->mbus_code = f->mbus_code; - - /* - * Make sure we have appropriate DMA buffers. - */ - ret = -ENOMEM; - if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage) - cafe_free_dma_bufs(cam); - if (cam->nbufs == 0) { - if (cafe_alloc_dma_bufs(cam, 0)) - goto out; - } - /* - * It looks like this might work, so let's program the sensor. - */ - ret = cafe_cam_configure(cam); - if (! ret) - ret = cafe_ctlr_configure(cam); - out: - mutex_unlock(&cam->s_mutex); - return ret; -} - -/* - * Return our stored notion of how the camera is/should be configured. - * The V4l2 spec wants us to be smarter, and actually get this from - * the camera (and not mess with it at open time). Someday. - */ -static int cafe_vidioc_g_fmt_vid_cap(struct file *filp, void *priv, - struct v4l2_format *f) -{ - struct cafe_camera *cam = priv; - - f->fmt.pix = cam->pix_format; - return 0; -} - -/* - * We only have one input - the sensor - so minimize the nonsense here. - */ -static int cafe_vidioc_enum_input(struct file *filp, void *priv, - struct v4l2_input *input) -{ - if (input->index != 0) - return -EINVAL; - - input->type = V4L2_INPUT_TYPE_CAMERA; - input->std = V4L2_STD_ALL; /* Not sure what should go here */ - strcpy(input->name, "Camera"); - return 0; -} - -static int cafe_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int cafe_vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - if (i != 0) - return -EINVAL; - return 0; -} - -/* from vivi.c */ -static int cafe_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a) -{ - return 0; -} - -/* - * G/S_PARM. Most of this is done by the sensor, but we are - * the level which controls the number of read buffers. - */ -static int cafe_vidioc_g_parm(struct file *filp, void *priv, - struct v4l2_streamparm *parms) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, video, g_parm, parms); - mutex_unlock(&cam->s_mutex); - parms->parm.capture.readbuffers = n_dma_bufs; - return ret; -} - -static int cafe_vidioc_s_parm(struct file *filp, void *priv, - struct v4l2_streamparm *parms) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, video, s_parm, parms); - mutex_unlock(&cam->s_mutex); - parms->parm.capture.readbuffers = n_dma_bufs; - return ret; -} - -static int cafe_vidioc_g_chip_ident(struct file *file, void *priv, - struct v4l2_dbg_chip_ident *chip) -{ - struct cafe_camera *cam = priv; - - chip->ident = V4L2_IDENT_NONE; - chip->revision = 0; - if (v4l2_chip_match_host(&chip->match)) { - chip->ident = V4L2_IDENT_CAFE; - return 0; - } - return sensor_call(cam, core, g_chip_ident, chip); -} - -static int cafe_vidioc_enum_framesizes(struct file *filp, void *priv, - struct v4l2_frmsizeenum *sizes) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, video, enum_framesizes, sizes); - mutex_unlock(&cam->s_mutex); - return ret; -} - -static int cafe_vidioc_enum_frameintervals(struct file *filp, void *priv, - struct v4l2_frmivalenum *interval) -{ - struct cafe_camera *cam = priv; - int ret; - - mutex_lock(&cam->s_mutex); - ret = sensor_call(cam, video, enum_frameintervals, interval); - mutex_unlock(&cam->s_mutex); - return ret; -} - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int cafe_vidioc_g_register(struct file *file, void *priv, - struct v4l2_dbg_register *reg) -{ - struct cafe_camera *cam = priv; - - if (v4l2_chip_match_host(®->match)) { - reg->val = cafe_reg_read(cam, reg->reg); - reg->size = 4; - return 0; - } - return sensor_call(cam, core, g_register, reg); -} - -static int cafe_vidioc_s_register(struct file *file, void *priv, - struct v4l2_dbg_register *reg) -{ - struct cafe_camera *cam = priv; - - if (v4l2_chip_match_host(®->match)) { - cafe_reg_write(cam, reg->reg, reg->val); - return 0; - } - return sensor_call(cam, core, s_register, reg); -} -#endif - -/* - * This template device holds all of those v4l2 methods; we - * clone it for specific real devices. - */ - -static const struct v4l2_file_operations cafe_v4l_fops = { - .owner = THIS_MODULE, - .open = cafe_v4l_open, - .release = cafe_v4l_release, - .read = cafe_v4l_read, - .poll = cafe_v4l_poll, - .mmap = cafe_v4l_mmap, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = { - .vidioc_querycap = cafe_vidioc_querycap, - .vidioc_enum_fmt_vid_cap = cafe_vidioc_enum_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = cafe_vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = cafe_vidioc_s_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = cafe_vidioc_g_fmt_vid_cap, - .vidioc_enum_input = cafe_vidioc_enum_input, - .vidioc_g_input = cafe_vidioc_g_input, - .vidioc_s_input = cafe_vidioc_s_input, - .vidioc_s_std = cafe_vidioc_s_std, - .vidioc_reqbufs = cafe_vidioc_reqbufs, - .vidioc_querybuf = cafe_vidioc_querybuf, - .vidioc_qbuf = cafe_vidioc_qbuf, - .vidioc_dqbuf = cafe_vidioc_dqbuf, - .vidioc_streamon = cafe_vidioc_streamon, - .vidioc_streamoff = cafe_vidioc_streamoff, - .vidioc_queryctrl = cafe_vidioc_queryctrl, - .vidioc_g_ctrl = cafe_vidioc_g_ctrl, - .vidioc_s_ctrl = cafe_vidioc_s_ctrl, - .vidioc_g_parm = cafe_vidioc_g_parm, - .vidioc_s_parm = cafe_vidioc_s_parm, - .vidioc_enum_framesizes = cafe_vidioc_enum_framesizes, - .vidioc_enum_frameintervals = cafe_vidioc_enum_frameintervals, - .vidioc_g_chip_ident = cafe_vidioc_g_chip_ident, -#ifdef CONFIG_VIDEO_ADV_DEBUG - .vidioc_g_register = cafe_vidioc_g_register, - .vidioc_s_register = cafe_vidioc_s_register, -#endif -}; - -static struct video_device cafe_v4l_template = { - .name = "cafe", - .tvnorms = V4L2_STD_NTSC_M, - .current_norm = V4L2_STD_NTSC_M, /* make mplayer happy */ - - .fops = &cafe_v4l_fops, - .ioctl_ops = &cafe_v4l_ioctl_ops, - .release = video_device_release_empty, -}; - - -/* ---------------------------------------------------------------------- */ -/* - * Interrupt handler stuff - */ - - - -static void cafe_frame_tasklet(unsigned long data) -{ - struct cafe_camera *cam = (struct cafe_camera *) data; - int i; - unsigned long flags; - struct cafe_sio_buffer *sbuf; - - spin_lock_irqsave(&cam->dev_lock, flags); - for (i = 0; i < cam->nbufs; i++) { - int bufno = cam->next_buf; - if (bufno < 0) { /* "will never happen" */ - cam_err(cam, "No valid bufs in tasklet!\n"); - break; - } - if (++(cam->next_buf) >= cam->nbufs) - cam->next_buf = 0; - if (! test_bit(bufno, &cam->flags)) - continue; - if (list_empty(&cam->sb_avail)) - break; /* Leave it valid, hope for better later */ - clear_bit(bufno, &cam->flags); - sbuf = list_entry(cam->sb_avail.next, - struct cafe_sio_buffer, list); - /* - * Drop the lock during the big copy. This *should* be safe... - */ - spin_unlock_irqrestore(&cam->dev_lock, flags); - memcpy(sbuf->buffer, cam->dma_bufs[bufno], - cam->pix_format.sizeimage); - sbuf->v4lbuf.bytesused = cam->pix_format.sizeimage; - sbuf->v4lbuf.sequence = cam->buf_seq[bufno]; - sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED; - sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE; - spin_lock_irqsave(&cam->dev_lock, flags); - list_move_tail(&sbuf->list, &cam->sb_full); - } - if (! list_empty(&cam->sb_full)) - wake_up(&cam->iowait); - spin_unlock_irqrestore(&cam->dev_lock, flags); -} - - - -static void cafe_frame_complete(struct cafe_camera *cam, int frame) -{ - /* - * Basic frame housekeeping. - */ - if (test_bit(frame, &cam->flags) && printk_ratelimit()) - cam_err(cam, "Frame overrun on %d, frames lost\n", frame); - set_bit(frame, &cam->flags); - clear_bit(CF_DMA_ACTIVE, &cam->flags); - if (cam->next_buf < 0) - cam->next_buf = frame; - cam->buf_seq[frame] = ++(cam->sequence); - - switch (cam->state) { - /* - * If in single read mode, try going speculative. - */ - case S_SINGLEREAD: - cam->state = S_SPECREAD; - cam->specframes = 0; - wake_up(&cam->iowait); - break; - - /* - * If we are already doing speculative reads, and nobody is - * reading them, just stop. - */ - case S_SPECREAD: - if (++(cam->specframes) >= cam->nbufs) { - cafe_ctlr_stop(cam); - cafe_ctlr_irq_disable(cam); - cam->state = S_IDLE; - } - wake_up(&cam->iowait); - break; - /* - * For the streaming case, we defer the real work to the - * camera tasklet. - * - * FIXME: if the application is not consuming the buffers, - * we should eventually put things on hold and restart in - * vidioc_dqbuf(). - */ - case S_STREAMING: - tasklet_schedule(&cam->s_tasklet); - break; - - default: - cam_err(cam, "Frame interrupt in non-operational state\n"); - break; - } -} - - - - -static void cafe_frame_irq(struct cafe_camera *cam, unsigned int irqs) -{ - unsigned int frame; - - cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */ - /* - * Handle any frame completions. There really should - * not be more than one of these, or we have fallen - * far behind. - */ - for (frame = 0; frame < cam->nbufs; frame++) - if (irqs & (IRQ_EOF0 << frame)) - cafe_frame_complete(cam, frame); - /* - * If a frame starts, note that we have DMA active. This - * code assumes that we won't get multiple frame interrupts - * at once; may want to rethink that. - */ - if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) - set_bit(CF_DMA_ACTIVE, &cam->flags); -} - - - -static irqreturn_t cafe_irq(int irq, void *data) -{ - struct cafe_camera *cam = data; - unsigned int irqs; - - spin_lock(&cam->dev_lock); - irqs = cafe_reg_read(cam, REG_IRQSTAT); - if ((irqs & ALLIRQS) == 0) { - spin_unlock(&cam->dev_lock); - return IRQ_NONE; - } - if (irqs & FRAMEIRQS) - cafe_frame_irq(cam, irqs); - if (irqs & TWSIIRQS) { - cafe_reg_write(cam, REG_IRQSTAT, TWSIIRQS); - wake_up(&cam->smbus_wait); - } - spin_unlock(&cam->dev_lock); - return IRQ_HANDLED; -} - - -/* -------------------------------------------------------------------------- */ -/* - * PCI interface stuff. - */ - -static const struct dmi_system_id olpc_xo1_dmi[] = { - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "OLPC"), - DMI_MATCH(DMI_PRODUCT_NAME, "XO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "1"), - }, - }, - { } -}; - -static int cafe_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - int ret; - struct cafe_camera *cam; - struct ov7670_config sensor_cfg = { - /* This controller only does SMBUS */ - .use_smbus = true, - - /* - * Exclude QCIF mode, because it only captures a tiny portion - * of the sensor FOV - */ - .min_width = 320, - .min_height = 240, - }; - struct i2c_board_info ov7670_info = { - .type = "ov7670", - .addr = 0x42, - .platform_data = &sensor_cfg, - }; - - /* - * Start putting together one of our big camera structures. - */ - ret = -ENOMEM; - cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL); - if (cam == NULL) - goto out; - ret = v4l2_device_register(&pdev->dev, &cam->v4l2_dev); - if (ret) - goto out_free; - - mutex_init(&cam->s_mutex); - spin_lock_init(&cam->dev_lock); - cam->state = S_NOTREADY; - cafe_set_config_needed(cam, 1); - init_waitqueue_head(&cam->smbus_wait); - init_waitqueue_head(&cam->iowait); - cam->pdev = pdev; - cam->pix_format = cafe_def_pix_format; - cam->mbus_code = cafe_def_mbus_code; - INIT_LIST_HEAD(&cam->dev_list); - INIT_LIST_HEAD(&cam->sb_avail); - INIT_LIST_HEAD(&cam->sb_full); - tasklet_init(&cam->s_tasklet, cafe_frame_tasklet, (unsigned long) cam); - /* - * Get set up on the PCI bus. - */ - ret = pci_enable_device(pdev); - if (ret) - goto out_unreg; - pci_set_master(pdev); - - ret = -EIO; - cam->regs = pci_iomap(pdev, 0, 0); - if (! cam->regs) { - printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); - goto out_unreg; - } - ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); - if (ret) - goto out_iounmap; - /* - * Initialize the controller and leave it powered up. It will - * stay that way until the sensor driver shows up. - */ - cafe_ctlr_init(cam); - cafe_ctlr_power_up(cam); - /* - * Set up I2C/SMBUS communications. We have to drop the mutex here - * because the sensor could attach in this call chain, leading to - * unsightly deadlocks. - */ - ret = cafe_smbus_setup(cam); - if (ret) - goto out_freeirq; - - /* Apply XO-1 clock speed */ - if (dmi_check_system(olpc_xo1_dmi)) - sensor_cfg.clock_speed = 45; - - cam->sensor_addr = ov7670_info.addr; - cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, &cam->i2c_adapter, - &ov7670_info, NULL); - if (cam->sensor == NULL) { - ret = -ENODEV; - goto out_smbus; - } - - ret = cafe_cam_init(cam); - if (ret) - goto out_smbus; - - /* - * Get the v4l2 setup done. - */ - mutex_lock(&cam->s_mutex); - cam->vdev = cafe_v4l_template; - cam->vdev.debug = 0; -/* cam->vdev.debug = V4L2_DEBUG_IOCTL_ARG;*/ - cam->vdev.v4l2_dev = &cam->v4l2_dev; - ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1); - if (ret) - goto out_unlock; - video_set_drvdata(&cam->vdev, cam); - - /* - * If so requested, try to get our DMA buffers now. - */ - if (!alloc_bufs_at_read) { - if (cafe_alloc_dma_bufs(cam, 1)) - cam_warn(cam, "Unable to alloc DMA buffers at load" - " will try again later."); - } - - mutex_unlock(&cam->s_mutex); - return 0; - -out_unlock: - mutex_unlock(&cam->s_mutex); -out_smbus: - cafe_smbus_shutdown(cam); -out_freeirq: - cafe_ctlr_power_down(cam); - free_irq(pdev->irq, cam); -out_iounmap: - pci_iounmap(pdev, cam->regs); -out_free: - v4l2_device_unregister(&cam->v4l2_dev); -out_unreg: - kfree(cam); -out: - return ret; -} - - -/* - * Shut down an initialized device - */ -static void cafe_shutdown(struct cafe_camera *cam) -{ -/* FIXME: Make sure we take care of everything here */ - if (cam->n_sbufs > 0) - /* What if they are still mapped? Shouldn't be, but... */ - cafe_free_sio_buffers(cam); - cafe_ctlr_stop_dma(cam); - cafe_ctlr_power_down(cam); - cafe_smbus_shutdown(cam); - cafe_free_dma_bufs(cam); - free_irq(cam->pdev->irq, cam); - pci_iounmap(cam->pdev, cam->regs); - video_unregister_device(&cam->vdev); -} - - -static void cafe_pci_remove(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); - struct cafe_camera *cam = to_cam(v4l2_dev); - - if (cam == NULL) { - printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev); - return; - } - mutex_lock(&cam->s_mutex); - if (cam->users > 0) - cam_warn(cam, "Removing a device with users!\n"); - cafe_shutdown(cam); - v4l2_device_unregister(&cam->v4l2_dev); - kfree(cam); -/* No unlock - it no longer exists */ -} - - -#ifdef CONFIG_PM -/* - * Basic power management. - */ -static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); - struct cafe_camera *cam = to_cam(v4l2_dev); - int ret; - enum cafe_state cstate; - - ret = pci_save_state(pdev); - if (ret) - return ret; - cstate = cam->state; /* HACK - stop_dma sets to idle */ - cafe_ctlr_stop_dma(cam); - cafe_ctlr_power_down(cam); - pci_disable_device(pdev); - cam->state = cstate; - return 0; -} - - -static int cafe_pci_resume(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); - struct cafe_camera *cam = to_cam(v4l2_dev); - int ret = 0; - - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - - if (ret) { - cam_warn(cam, "Unable to re-enable device on resume!\n"); - return ret; - } - cafe_ctlr_init(cam); - - mutex_lock(&cam->s_mutex); - if (cam->users > 0) { - cafe_ctlr_power_up(cam); - __cafe_cam_reset(cam); - } else { - cafe_ctlr_power_down(cam); - } - mutex_unlock(&cam->s_mutex); - - set_bit(CF_CONFIG_NEEDED, &cam->flags); - if (cam->state == S_SPECREAD) - cam->state = S_IDLE; /* Don't bother restarting */ - else if (cam->state == S_SINGLEREAD || cam->state == S_STREAMING) - ret = cafe_read_setup(cam, cam->state); - return ret; -} - -#endif /* CONFIG_PM */ - - -static struct pci_device_id cafe_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, - PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, cafe_ids); - -static struct pci_driver cafe_pci_driver = { - .name = "cafe1000-ccic", - .id_table = cafe_ids, - .probe = cafe_pci_probe, - .remove = cafe_pci_remove, -#ifdef CONFIG_PM - .suspend = cafe_pci_suspend, - .resume = cafe_pci_resume, -#endif -}; - - - - -static int __init cafe_init(void) -{ - int ret; - - printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", - CAFE_VERSION); - ret = pci_register_driver(&cafe_pci_driver); - if (ret) { - printk(KERN_ERR "Unable to register cafe_ccic driver\n"); - goto out; - } - ret = 0; - - out: - return ret; -} - - -static void __exit cafe_exit(void) -{ - pci_unregister_driver(&cafe_pci_driver); -} - -module_init(cafe_init); -module_exit(cafe_exit); diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h index 6d6d184..ab25218 100644 --- a/drivers/media/video/cpia2/cpia2.h +++ b/drivers/media/video/cpia2/cpia2.h @@ -31,7 +31,6 @@ #ifndef __CPIA2_H__ #define __CPIA2_H__ -#include <linux/version.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <linux/usb.h> @@ -43,10 +42,6 @@ /* define for verbose debug output */ //#define _CPIA2_DEBUG_ -#define CPIA2_MAJ_VER 3 -#define CPIA2_MIN_VER 0 -#define CPIA2_PATCH_VER 0 - /*** * Image defines ***/ diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 40eb632..077eb1d 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -29,8 +29,7 @@ * Alan Cox <alan@lxorguk.ukuu.org.uk> ****************************************************************************/ -#include <linux/version.h> - +#define CPIA_VERSION "3.0.1" #include <linux/module.h> #include <linux/time.h> @@ -80,6 +79,7 @@ MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>"); MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras"); MODULE_SUPPORTED_DEVICE("video"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CPIA_VERSION); #define ABOUT "V4L-Driver for Vision CPiA2 based cameras" @@ -465,9 +465,6 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0) memset(vc->bus_info,0, sizeof(vc->bus_info)); - vc->version = KERNEL_VERSION(CPIA2_MAJ_VER, CPIA2_MIN_VER, - CPIA2_PATCH_VER); - vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; @@ -1558,8 +1555,8 @@ static void __init check_parameters(void) *****************************************************************************/ static int __init cpia2_init(void) { - LOG("%s v%d.%d.%d\n", - ABOUT, CPIA2_MAJ_VER, CPIA2_MIN_VER, CPIA2_PATCH_VER); + LOG("%s v%s\n", + ABOUT, CPIA_VERSION); check_parameters(); cpia2_usb_init(); return 0; @@ -1579,4 +1576,3 @@ static void __exit cpia2_exit(void) module_init(cpia2_init); module_exit(cpia2_exit); - diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c index d50d69d..a1e6c2a 100644 --- a/drivers/media/video/cx18/cx18-alsa-main.c +++ b/drivers/media/video/cx18/cx18-alsa-main.c @@ -192,6 +192,7 @@ static int snd_cx18_init(struct v4l2_device *v4l2_dev) err_exit_free: if (sc != NULL) snd_card_free(sc); + kfree(cxsc); err_exit: return ret; } diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 0864272..1834207 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -25,7 +25,6 @@ #ifndef CX18_DRIVER_H #define CX18_DRIVER_H -#include <linux/version.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index e80134f..afe0a29 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -469,7 +469,6 @@ static int cx18_querycap(struct file *file, void *fh, strlcpy(vcap->card, cx->card_name, sizeof(vcap->card)); snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(cx->pci_dev)); - vcap->version = CX18_DRIVER_VERSION; /* version */ vcap->capabilities = cx->v4l2_cap; /* capabilities */ return 0; } diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h index cd189b6..fed48b6 100644 --- a/drivers/media/video/cx18/cx18-version.h +++ b/drivers/media/video/cx18/cx18-version.h @@ -23,12 +23,6 @@ #define CX18_VERSION_H #define CX18_DRIVER_NAME "cx18" -#define CX18_DRIVER_VERSION_MAJOR 1 -#define CX18_DRIVER_VERSION_MINOR 5 -#define CX18_DRIVER_VERSION_PATCHLEVEL 0 - -#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL) -#define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \ - CX18_DRIVER_VERSION_MINOR, CX18_DRIVER_VERSION_PATCHLEVEL) +#define CX18_VERSION "1.5.1" #endif diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index 8d78134..53ff26e 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -355,6 +355,8 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev, case CX231XX_BOARD_HAUPPAUGE_EXETER: case CX231XX_BOARD_HAUPPAUGE_USBLIVE2: case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: if (avmode == POLARIS_AVMODE_ANALOGT_TV) { while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | FLD_PWRDN_ENABLE_PLL)) { @@ -1733,6 +1735,8 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard) break; case CX231XX_BOARD_CNXT_RDE_253S: case CX231XX_BOARD_CNXT_RDU_253S: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: func_mode = 0x01; break; default: diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 2270381..53dae2a 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -387,6 +387,7 @@ struct cx231xx_board cx231xx_boards[] = { .norm = V4L2_STD_NTSC, .no_alt_vanc = 1, .external_av = 1, + .dont_use_port_3 = 1, .input = {{ .type = CX231XX_VMUX_COMPOSITE1, .vmux = CX231XX_VIN_2_1, @@ -532,6 +533,76 @@ struct cx231xx_board cx231xx_boards[] = { .gpio = NULL, } }, }, + [CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL] = { + .name = "Hauppauge WinTV USB2 FM (PAL)", + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, + .tuner_gpio = RDE250_XCV_TUNER, + .tuner_sif_gpio = 0x05, + .tuner_scl_gpio = 0x1a, + .tuner_sda_gpio = 0x1b, + .decoder = CX231XX_AVDECODER, + .output_mode = OUT_MODE_VIP11, + .ctl_pin_status_mask = 0xFFFFFFC4, + .agc_analog_digital_select_gpio = 0x0c, + .gpio_pin_status_mask = 0x4001000, + .tuner_i2c_master = 1, + .norm = V4L2_STD_PAL, + + .input = {{ + .type = CX231XX_VMUX_TELEVISION, + .vmux = CX231XX_VIN_3_1, + .amux = CX231XX_AMUX_VIDEO, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_COMPOSITE1, + .vmux = CX231XX_VIN_2_1, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_SVIDEO, + .vmux = CX231XX_VIN_1_1 | + (CX231XX_VIN_1_2 << 8) | + CX25840_SVIDEO_ON, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + } }, + }, + [CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC] = { + .name = "Hauppauge WinTV USB2 FM (NTSC)", + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, + .tuner_gpio = RDE250_XCV_TUNER, + .tuner_sif_gpio = 0x05, + .tuner_scl_gpio = 0x1a, + .tuner_sda_gpio = 0x1b, + .decoder = CX231XX_AVDECODER, + .output_mode = OUT_MODE_VIP11, + .ctl_pin_status_mask = 0xFFFFFFC4, + .agc_analog_digital_select_gpio = 0x0c, + .gpio_pin_status_mask = 0x4001000, + .tuner_i2c_master = 1, + .norm = V4L2_STD_NTSC, + + .input = {{ + .type = CX231XX_VMUX_TELEVISION, + .vmux = CX231XX_VIN_3_1, + .amux = CX231XX_AMUX_VIDEO, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_COMPOSITE1, + .vmux = CX231XX_VIN_2_1, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_SVIDEO, + .vmux = CX231XX_VIN_1_1 | + (CX231XX_VIN_1_2 << 8) | + CX25840_SVIDEO_ON, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + } }, + }, }; const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards); @@ -553,6 +624,10 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_CNXT_RDE_250}, {USB_DEVICE(0x0572, 0x58A0), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, + {USB_DEVICE(0x2040, 0xb110), + .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL}, + {USB_DEVICE(0x2040, 0xb111), + .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC}, {USB_DEVICE(0x2040, 0xb120), .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER}, {USB_DEVICE(0x2040, 0xb140), @@ -1051,6 +1126,9 @@ static int cx231xx_usb_probe(struct usb_interface *interface, if (assoc_desc->bFirstInterface != ifnum) { cx231xx_err(DRIVER_NAME ": Not found " "matching IAD interface\n"); + cx231xx_devused &= ~(1 << nr); + kfree(dev); + dev = NULL; return -ENODEV; } diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c index abe500f..d4457f9 100644 --- a/drivers/media/video/cx231xx/cx231xx-core.c +++ b/drivers/media/video/cx231xx/cx231xx-core.c @@ -742,6 +742,8 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) case CX231XX_BOARD_CNXT_RDU_253S: case CX231XX_BOARD_HAUPPAUGE_EXETER: case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); break; default: @@ -1381,6 +1383,8 @@ int cx231xx_dev_init(struct cx231xx *dev) case CX231XX_BOARD_CNXT_RDU_253S: case CX231XX_BOARD_HAUPPAUGE_EXETER: case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: + case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); break; default: diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c index a69c24d..6e81f97 100644 --- a/drivers/media/video/cx231xx/cx231xx-video.c +++ b/drivers/media/video/cx231xx/cx231xx-video.c @@ -29,7 +29,6 @@ #include <linux/bitmap.h> #include <linux/usb.h> #include <linux/i2c.h> -#include <linux/version.h> #include <linux/mm.h> #include <linux/mutex.h> #include <linux/slab.h> @@ -45,7 +44,7 @@ #include "cx231xx.h" #include "cx231xx-vbi.h" -#define CX231XX_VERSION_CODE KERNEL_VERSION(0, 0, 1) +#define CX231XX_VERSION "0.0.2" #define DRIVER_AUTHOR "Srinivasa Deevi <srinivasa.deevi@conexant.com>" #define DRIVER_DESC "Conexant cx231xx based USB video device driver" @@ -70,6 +69,7 @@ do {\ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX231XX_VERSION); static unsigned int card[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET }; static unsigned int video_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET }; @@ -1179,7 +1179,8 @@ static int vidioc_enum_input(struct file *file, void *priv, { struct cx231xx_fh *fh = priv; struct cx231xx *dev = fh->dev; - unsigned int n; + u32 gen_stat; + unsigned int ret, n; n = i->index; if (n >= MAX_CX231XX_INPUT) @@ -1198,6 +1199,18 @@ static int vidioc_enum_input(struct file *file, void *priv, i->std = dev->vdev->tvnorms; + /* If they are asking about the active input, read signal status */ + if (n == dev->video_input) { + ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS, + GEN_STAT, 2, &gen_stat, 4); + if (ret > 0) { + if ((gen_stat & FLD_VPRES) == 0x00) + i->status |= V4L2_IN_ST_NO_SIGNAL; + if ((gen_stat & FLD_HLOCK) == 0x00) + i->status |= V4L2_IN_ST_NO_H_LOCK; + } + } + return 0; } @@ -1869,8 +1882,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card)); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = CX231XX_VERSION_CODE; - cap->capabilities = V4L2_CAP_VBI_CAPTURE | #if 0 V4L2_CAP_SLICED_VBI_CAPTURE | @@ -2057,7 +2068,6 @@ static int radio_querycap(struct file *file, void *priv, strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card)); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = CX231XX_VERSION_CODE; cap->capabilities = V4L2_CAP_TUNER; return 0; } @@ -2570,11 +2580,8 @@ int cx231xx_register_analog_devices(struct cx231xx *dev) { int ret; - cx231xx_info("%s: v4l2 driver version %d.%d.%d\n", - dev->name, - (CX231XX_VERSION_CODE >> 16) & 0xff, - (CX231XX_VERSION_CODE >> 8) & 0xff, - CX231XX_VERSION_CODE & 0xff); + cx231xx_info("%s: v4l2 driver version %s\n", + dev->name, CX231XX_VERSION); /* set default norm */ /*dev->norm = cx231xx_video_template.current_norm; */ diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h index 46dd840..2000bc6 100644 --- a/drivers/media/video/cx231xx/cx231xx.h +++ b/drivers/media/video/cx231xx/cx231xx.h @@ -43,7 +43,7 @@ #include "cx231xx-conf-reg.h" #define DRIVER_NAME "cx231xx" -#define PWR_SLEEP_INTERVAL 5 +#define PWR_SLEEP_INTERVAL 10 /* I2C addresses for control block in Cx231xx */ #define AFE_DEVICE_ADDRESS 0x60 @@ -67,6 +67,8 @@ #define CX231XX_BOARD_PV_XCAPTURE_USB 11 #define CX231XX_BOARD_KWORLD_UB430_USB_HYBRID 12 #define CX231XX_BOARD_ICONBIT_U100 13 +#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14 +#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15 /* Limits minimum and default number of buffers */ #define CX231XX_MIN_BUF 4 @@ -112,7 +114,6 @@ V4L2_STD_PAL_BG | V4L2_STD_PAL_DK | V4L2_STD_PAL_I | \ V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | \ V4L2_STD_PAL_60 | V4L2_STD_SECAM_L | V4L2_STD_SECAM_DK) -#define CX231xx_VERSION_CODE KERNEL_VERSION(0, 0, 2) #define SLEEP_S5H1432 30 #define CX23417_OSC_EN 8 diff --git a/drivers/media/video/cx23885/altera-ci.c b/drivers/media/video/cx23885/altera-ci.c index 678539b..1fa8927 100644 --- a/drivers/media/video/cx23885/altera-ci.c +++ b/drivers/media/video/cx23885/altera-ci.c @@ -52,7 +52,6 @@ * | DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| * +-------+-------+-------+-------+-------+-------+-------+-------+ */ -#include <linux/version.h> #include <media/videobuf-dma-sg.h> #include <media/videobuf-dvb.h> #include "altera-ci.h" diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 9a98dc5..67c4a59 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1359,7 +1359,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); - cap->version = CX23885_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 934185c..76b7563 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -29,11 +29,17 @@ #include "../../../staging/altera-stapl/altera.h" #include "cx23885.h" #include "tuner-xc2028.h" +#include "netup-eeprom.h" #include "netup-init.h" #include "altera-ci.h" +#include "xc4000.h" #include "xc5000.h" #include "cx23888-ir.h" +static unsigned int netup_card_rev = 1; +module_param(netup_card_rev, int, 0644); +MODULE_PARM_DESC(netup_card_rev, + "NetUP Dual DVB-T/C CI card revision"); static unsigned int enable_885_ir; module_param(enable_885_ir, int, 0644); MODULE_PARM_DESC(enable_885_ir, @@ -175,6 +181,34 @@ struct cx23885_board cx23885_boards[] = { .name = "Leadtek Winfast PxDVR3200 H", .portc = CX23885_MPEG_DVB, }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = { + .name = "Leadtek Winfast PxDVR3200 H XC4000", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_type = TUNER_XC4000, + .radio_addr = 0x61, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + } }, + }, [CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = { .name = "Compro VideoMate E650F", .portc = CX23885_MPEG_DVB, @@ -433,6 +467,10 @@ struct cx23885_subid cx23885_subids[] = { .subdevice = 0x6681, .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, }, { + .subvendor = 0x107d, + .subdevice = 0x6f39, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000, + }, { .subvendor = 0x185b, .subdevice = 0xe800, .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, @@ -749,6 +787,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: @@ -909,6 +948,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) cx_set(GP0_IO, 0x000f000f); break; case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: @@ -1097,12 +1137,19 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1400: - case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1210: /* FIXME: Implement me */ break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + ret = cx23888_ir_probe(dev); + if (ret) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rx_pin_cfg_count, ir_rx_pin_cfg); + break; case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: ret = cx23888_ir_probe(dev); @@ -1156,6 +1203,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) void cx23885_ir_fini(struct cx23885_dev *dev) { switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: cx23885_irq_remove(dev, PCI_MSK_IR); @@ -1199,6 +1247,7 @@ int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) { switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: if (dev->sd_ir) @@ -1325,6 +1374,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1275: @@ -1353,10 +1403,12 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_HAUPPAUGE_HVR1800lp: case CX23885_BOARD_HAUPPAUGE_HVR1700: case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_MYGICA_X8506: case CX23885_BOARD_MAGICPRO_PROHDTVE2: @@ -1383,6 +1435,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) const struct firmware *fw; const char *filename = "dvb-netup-altera-01.fw"; char *action = "configure"; + static struct netup_card_info cinfo; struct altera_config netup_config = { .dev = dev, .action = action, @@ -1391,6 +1444,21 @@ void cx23885_card_setup(struct cx23885_dev *dev) netup_initialize(dev); + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + if (netup_card_rev) + cinfo.rev = netup_card_rev; + + switch (cinfo.rev) { + case 0x4: + filename = "dvb-netup-altera-04.fw"; + break; + default: + filename = "dvb-netup-altera-01.fw"; + break; + } + printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n", + cinfo.rev, filename); + ret = request_firmware(&fw, filename, &dev->pci->dev); if (ret != 0) printk(KERN_ERR "did not find the firmware file. (%s) " diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 419777a..ee41a88 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -42,6 +42,7 @@ MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX23885_VERSION); static unsigned int debug; module_param(debug, int, 0644); @@ -2147,14 +2148,8 @@ static struct pci_driver cx23885_pci_driver = { static int __init cx23885_init(void) { - printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n", - (CX23885_VERSION_CODE >> 16) & 0xff, - (CX23885_VERSION_CODE >> 8) & 0xff, - CX23885_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx23885: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx23885 driver version %s loaded\n", + CX23885_VERSION); return pci_register_driver(&cx23885_pci_driver); } @@ -2165,5 +2160,3 @@ static void __exit cx23885_fini(void) module_init(cx23885_init); module_exit(cx23885_fini); - -/* ----------------------------------------------------------- */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 3c315f9..aa83f07 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -37,6 +37,7 @@ #include "tda8290.h" #include "tda18271.h" #include "lgdt330x.h" +#include "xc4000.h" #include "xc5000.h" #include "max2165.h" #include "tda10048.h" @@ -921,6 +922,26 @@ static int dvb_register(struct cx23885_tsport *port) fe->ops.tuner_ops.set_config(fe, &ctl); } break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, &cfg); + } + break; case CX23885_BOARD_TBS_6920: i2c_bus = &dev->i2c_bus[1]; @@ -1249,7 +1270,7 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port) * implement MFE support. */ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); - if (fe0->dvb.frontend) + if (fe0 && fe0->dvb.frontend) videobuf_dvb_unregister_bus(&port->frontends); switch (port->dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c index e97cafd..ce765e3 100644 --- a/drivers/media/video/cx23885/cx23885-input.c +++ b/drivers/media/video/cx23885/cx23885-input.c @@ -82,6 +82,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) return; switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: case CX23885_BOARD_TEVII_S470: @@ -133,6 +134,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: case CX23885_BOARD_HAUPPAUGE_HVR1250: @@ -229,6 +231,9 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev) v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); } + flush_work_sync(&dev->cx25840_work); + flush_work_sync(&dev->ir_rx_work); + flush_work_sync(&dev->ir_tx_work); } static void cx23885_input_ir_close(struct rc_dev *rc) @@ -257,6 +262,7 @@ int cx23885_input_init(struct cx23885_dev *dev) return -ENODEV; switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1850: case CX23885_BOARD_HAUPPAUGE_HVR1290: case CX23885_BOARD_HAUPPAUGE_HVR1250: diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index ee57f6b..896bb32 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1000,7 +1000,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, cx23885_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); - cap->version = CX23885_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index c186473..d86bc0b 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -36,10 +36,9 @@ #include "cx23885-reg.h" #include "media/cx2341x.h" -#include <linux/version.h> #include <linux/mutex.h> -#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 2) +#define CX23885_VERSION "0.0.3" #define UNSET (-1U) @@ -86,6 +85,7 @@ #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29 #define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index 423c1af..68d1240 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -113,6 +113,8 @@ MODULE_DESCRIPTION("ALSA driver module for cx2388x based TV cards"); MODULE_AUTHOR("Ricardo Cerqueira"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); + MODULE_SUPPORTED_DEVICE("{{Conexant,23881}," "{{Conexant,23882}," "{{Conexant,23883}"); @@ -973,14 +975,8 @@ static struct pci_driver cx88_audio_pci_driver = { */ static int __init cx88_audio_init(void) { - printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n", - (CX88_VERSION_CODE >> 16) & 0xff, - (CX88_VERSION_CODE >> 8) & 0xff, - CX88_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx2388x alsa driver version %s loaded\n", + CX88_VERSION); return pci_register_driver(&cx88_audio_pci_driver); } @@ -994,10 +990,3 @@ static void __exit cx88_audio_fini(void) module_init(cx88_audio_init); module_exit(cx88_audio_fini); - -/* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 11e49bb..e46446a 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -42,6 +42,7 @@ MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards"); MODULE_AUTHOR("Jelle Foks <jelle@foks.us>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); static unsigned int mpegbufs = 32; module_param(mpegbufs,int,0644); @@ -730,7 +731,6 @@ static int vidioc_querycap (struct file *file, void *priv, strcpy(cap->driver, "cx88_blackbird"); strlcpy(cap->card, core->board.name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); - cap->version = CX88_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | @@ -1368,14 +1368,8 @@ static struct cx8802_driver cx8802_blackbird_driver = { static int __init blackbird_init(void) { - printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n", - (CX88_VERSION_CODE >> 16) & 0xff, - (CX88_VERSION_CODE >> 8) & 0xff, - CX88_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx2388x blackbird driver version %s loaded\n", + CX88_VERSION); return cx8802_register_driver(&cx8802_blackbird_driver); } @@ -1389,11 +1383,3 @@ module_exit(blackbird_fini); module_param_named(video_debug,cx8802_mpeg_template.debug, int, 0644); MODULE_PARM_DESC(debug,"enable debug messages [video]"); - -/* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 27222c9..0d719fa 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -28,6 +28,7 @@ #include "cx88.h" #include "tea5767.h" +#include "xc4000.h" static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET }; @@ -2119,6 +2120,99 @@ static const struct cx88_board cx88_boards[] = { }, .mpeg = CX88_MPEG_DVB, }, + [CX88_BOARD_WINFAST_DTV1800H_XC4000] = { + .name = "Leadtek WinFast DTV1800 H (XC4000)", + .tuner_type = TUNER_XC4000, + .radio_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_addr = 0x61, + /* + * GPIO setting + * + * 2: mute (0=off,1=on) + * 12: tuner reset pin + * 13: audio source (0=tuner audio,1=line in) + * 14: FM (0=on,1=off ???) + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */ + .gpio2 = 0x0000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0400, /* pin 2 = 0 */ + .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */ + .gpio2 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, + [CX88_BOARD_WINFAST_DTV2000H_PLUS] = { + .name = "Leadtek WinFast DTV2000 H PLUS", + .tuner_type = TUNER_XC4000, + .radio_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_addr = 0x61, + /* + * GPIO + * 2: 1: mute audio + * 12: 0: reset XC4000 + * 13: 1: audio input is line in (0: tuner) + * 14: 0: FM radio + * 16: 0: RF input is cable + */ + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x0403, + .gpio1 = 0xF0D7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_CABLE, + .vmux = 0, + .gpio0 = 0x0403, + .gpio1 = 0xF0D7, + .gpio2 = 0x0100, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x0403, /* was 0x0407 */ + .gpio1 = 0xF0F7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }, { + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x0403, /* was 0x0407 */ + .gpio1 = 0xF0F7, + .gpio2 = 0x0101, + .gpio3 = 0x0000, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x0403, + .gpio1 = 0xF097, + .gpio2 = 0x0100, + .gpio3 = 0x0000, + }, + .mpeg = CX88_MPEG_DVB, + }, [CX88_BOARD_PROF_7301] = { .name = "Prof 7301 DVB-S/S2", .tuner_type = UNSET, @@ -2581,6 +2675,15 @@ static const struct cx88_subid cx88_subids[] = { .subdevice = 0x6654, .card = CX88_BOARD_WINFAST_DTV1800H, }, { + /* WinFast DTV1800 H with XC4000 tuner */ + .subvendor = 0x107d, + .subdevice = 0x6f38, + .card = CX88_BOARD_WINFAST_DTV1800H_XC4000, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f42, + .card = CX88_BOARD_WINFAST_DTV2000H_PLUS, + }, { /* PVR2000 PAL Model [107d:6630] */ .subvendor = 0x107d, .subdevice = 0x6630, @@ -2846,6 +2949,23 @@ static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core, return -EINVAL; } +static int cx88_xc4000_winfast2000h_plus_callback(struct cx88_core *core, + int command, int arg) +{ + switch (command) { + case XC4000_TUNER_RESET: + /* GPIO 12 (xc4000 tuner reset) */ + cx_set(MO_GP1_IO, 0x1010); + mdelay(50); + cx_clear(MO_GP1_IO, 0x10); + mdelay(75); + cx_set(MO_GP1_IO, 0x10); + mdelay(75); + return 0; + } + return -EINVAL; +} + /* ------------------------------------------------------------------- */ /* some Divco specific stuff */ static int cx88_pv_8000gt_callback(struct cx88_core *core, @@ -2948,6 +3068,19 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core, return -EINVAL; } +static int cx88_xc4000_tuner_callback(struct cx88_core *core, + int command, int arg) +{ + /* Board-specific callbacks */ + switch (core->boardnr) { + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + return cx88_xc4000_winfast2000h_plus_callback(core, + command, arg); + } + return -EINVAL; +} + /* ----------------------------------------------------------------------- */ /* Tuner callback function. Currently only needed for the Pinnacle * * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both * @@ -3022,6 +3155,9 @@ int cx88_tuner_callback(void *priv, int component, int command, int arg) case TUNER_XC2028: info_printk(core, "Calling XC2028/3028 callback\n"); return cx88_xc2028_tuner_callback(core, command, arg); + case TUNER_XC4000: + info_printk(core, "Calling XC4000 callback\n"); + return cx88_xc4000_tuner_callback(core, command, arg); case TUNER_XC5000: info_printk(core, "Calling XC5000 callback\n"); return cx88_xc5000_tuner_callback(core, command, arg); @@ -3109,13 +3245,13 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_WINFAST_DTV1800H: - /* GPIO 12 (xc3028 tuner reset) */ - cx_set(MO_GP1_IO, 0x1010); - mdelay(50); - cx_clear(MO_GP1_IO, 0x10); - mdelay(50); - cx_set(MO_GP1_IO, 0x10); - mdelay(50); + cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0); + break; + + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + cx88_xc4000_winfast2000h_plus_callback(core, + XC4000_TUNER_RESET, 0); break; case CX88_BOARD_TWINHAN_VP1027_DVBS: diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index 2e145f0a..fbcaa1c 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -636,6 +636,9 @@ int cx88_reset(struct cx88_core *core) cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int cx_write(MO_INT1_STAT, 0xFFFFFFFF); // Clear RISC int + /* set default notch filter */ + cx_andor(MO_HTOTAL, 0x1800, (HLNotchFilter4xFsc << 11)); + /* Reset on-board parts */ cx_write(MO_SRST_IO, 0); msleep(10); @@ -759,8 +762,8 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig if (nocomb) value |= (3 << 5); // disable comb filter - cx_write(MO_FILTER_EVEN, value); - cx_write(MO_FILTER_ODD, value); + cx_andor(MO_FILTER_EVEN, 0x7ffc7f, value); /* preserve PEAKEN, PSEL */ + cx_andor(MO_FILTER_ODD, 0x7ffc7f, value); dprintk(1,"set_scale: filter 0x%04x\n", value); return 0; @@ -994,10 +997,10 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm) // htotal tmp64 = norm_htotal(norm) * (u64)vdec_clock; do_div(tmp64, fsc8); - htotal = (u32)tmp64 | (HLNotchFilter4xFsc << 11); + htotal = (u32)tmp64; dprintk(1,"set_tvnorm: MO_HTOTAL 0x%08x [old=0x%08x,htotal=%d]\n", htotal, cx_read(MO_HTOTAL), (u32)tmp64); - cx_write(MO_HTOTAL, htotal); + cx_andor(MO_HTOTAL, 0x07ff, htotal); // vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes // the effective vbi offset ~244 samples, the same as the Bt8x8 diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index c69df7e..cf3d33a 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -41,6 +41,7 @@ #include "or51132.h" #include "lgdt330x.h" #include "s5h1409.h" +#include "xc4000.h" #include "xc5000.h" #include "nxt200x.h" #include "cx24123.h" @@ -63,6 +64,7 @@ MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); static unsigned int debug; module_param(debug, int, 0644); @@ -605,6 +607,39 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) return 0; } +static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg) +{ + struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { + printk(KERN_ERR "%s/2: dvb frontend not attached. " + "Can't attach xc4000\n", + dev->core->name); + return -EINVAL; + } + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap, + cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc4000 attach failed\n", + dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; + return -EINVAL; + } + + printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name); + + return 0; +} + static int cx24116_set_ts_param(struct dvb_frontend *fe, int is_punctured) { @@ -1294,7 +1329,25 @@ static int dvb_register(struct cx8802_dev *dev) goto frontend_detach; } break; - case CX88_BOARD_GENIATECH_X8000_MT: + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &cx88_pinnacle_hybrid_pctv, + &core->i2c_adap); + if (fe0->dvb.frontend) { + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (attach_xc4000(dev, &cfg) < 0) + goto frontend_detach; + } + break; + case CX88_BOARD_GENIATECH_X8000_MT: dev->ts_gen_cntrl = 0x00; fe0->dvb.frontend = dvb_attach(zl10353_attach, @@ -1577,6 +1630,11 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) udelay(1000); break; + case CX88_BOARD_WINFAST_DTV2000H_PLUS: + /* set RF input to AIR for DVB-T (GPIO 16) */ + cx_write(MO_GP2_IO, 0x0101); + break; + default: err = -ENODEV; } @@ -1692,14 +1750,8 @@ static struct cx8802_driver cx8802_dvb_driver = { static int __init dvb_init(void) { - printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n", - (CX88_VERSION_CODE >> 16) & 0xff, - (CX88_VERSION_CODE >> 8) & 0xff, - CX88_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n", + CX88_VERSION); return cx8802_register_driver(&cx8802_dvb_driver); } @@ -1710,10 +1762,3 @@ static void __exit dvb_fini(void) module_init(dvb_init); module_exit(dvb_fini); - -/* - * Local variables: - * c-basic-offset: 8 - * compile-command: "make DVB=1" - * End: - */ diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index 3f44200..e614201 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -100,6 +100,8 @@ static void cx88_ir_handle_key(struct cx88_IR *ir) break; case CX88_BOARD_WINFAST_DTV1000: case CX88_BOARD_WINFAST_DTV1800H: + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900); auxgpio = gpio; @@ -289,6 +291,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_WINFAST_DTV2000H: case CX88_BOARD_WINFAST_DTV2000H_J: case CX88_BOARD_WINFAST_DTV1800H: + case CX88_BOARD_WINFAST_DTV1800H_XC4000: + case CX88_BOARD_WINFAST_DTV2000H_PLUS: ir_codes = RC_MAP_WINFAST; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 1a7b983..cd5386e 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -39,6 +39,7 @@ MODULE_AUTHOR("Jelle Foks <jelle@foks.us>"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); static unsigned int debug; module_param(debug,int,0644); @@ -613,13 +614,17 @@ static int cx8802_request_acquire(struct cx8802_driver *drv) core->active_type_id != drv->type_id) return -EBUSY; - core->input = 0; - for (i = 0; - i < (sizeof(core->board.input) / sizeof(struct cx88_input)); - i++) { - if (core->board.input[i].type == CX88_VMUX_DVB) { - core->input = i; - break; + if (drv->type_id == CX88_MPEG_DVB) { + /* When switching to DVB, always set the input to the tuner */ + core->last_analog_input = core->input; + core->input = 0; + for (i = 0; + i < (sizeof(core->board.input) / sizeof(struct cx88_input)); + i++) { + if (core->board.input[i].type == CX88_VMUX_DVB) { + core->input = i; + break; + } } } @@ -644,6 +649,12 @@ static int cx8802_request_release(struct cx8802_driver *drv) if (drv->advise_release && --core->active_ref == 0) { + if (drv->type_id == CX88_MPEG_DVB) { + /* If the DVB driver is releasing, reset the input + state to the last configured analog input */ + core->input = core->last_analog_input; + } + drv->advise_release(drv); core->active_type_id = CX88_BOARD_NONE; mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO)); @@ -890,14 +901,8 @@ static struct pci_driver cx8802_pci_driver = { static int __init cx8802_init(void) { - printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %d.%d.%d loaded\n", - (CX88_VERSION_CODE >> 16) & 0xff, - (CX88_VERSION_CODE >> 8) & 0xff, - CX88_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %s loaded\n", + CX88_VERSION); return pci_register_driver(&cx8802_pci_driver); } diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index cef4f28..60d28fd 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -45,6 +45,7 @@ MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); +MODULE_VERSION(CX88_VERSION); /* ------------------------------------------------------------------ */ @@ -220,7 +221,23 @@ static const struct cx88_ctrl cx8800_ctls[] = { .reg = MO_UV_SATURATION, .mask = 0x00ff, .shift = 0, - },{ + }, { + .v = { + .id = V4L2_CID_SHARPNESS, + .name = "Sharpness", + .minimum = 0, + .maximum = 4, + .step = 1, + .default_value = 0x0, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + /* NOTE: the value is converted and written to both even + and odd registers in the code */ + .reg = MO_FILTER_ODD, + .mask = 7 << 7, + .shift = 7, + }, { .v = { .id = V4L2_CID_CHROMA_AGC, .name = "Chroma AGC", @@ -245,6 +262,20 @@ static const struct cx88_ctrl cx8800_ctls[] = { .mask = 1 << 9, .shift = 9, }, { + .v = { + .id = V4L2_CID_BAND_STOP_FILTER, + .name = "Notch filter", + .minimum = 0, + .maximum = 3, + .step = 1, + .default_value = 0x0, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = MO_HTOTAL, + .mask = 3 << 11, + .shift = 11, + }, { /* --- audio --- */ .v = { .id = V4L2_CID_AUDIO_MUTE, @@ -300,8 +331,10 @@ const u32 cx88_user_ctrls[] = { V4L2_CID_AUDIO_VOLUME, V4L2_CID_AUDIO_BALANCE, V4L2_CID_AUDIO_MUTE, + V4L2_CID_SHARPNESS, V4L2_CID_CHROMA_AGC, V4L2_CID_COLOR_KILLER, + V4L2_CID_BAND_STOP_FILTER, 0 }; EXPORT_SYMBOL(cx88_user_ctrls); @@ -962,6 +995,10 @@ int cx88_get_control (struct cx88_core *core, struct v4l2_control *ctl) case V4L2_CID_AUDIO_VOLUME: ctl->value = 0x3f - (value & 0x3f); break; + case V4L2_CID_SHARPNESS: + ctl->value = ((value & 0x0200) ? (((value & 0x0180) >> 7) + 1) + : 0); + break; default: ctl->value = ((value + (c->off << c->shift)) & c->mask) >> c->shift; break; @@ -1039,6 +1076,12 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl) } mask=0xffff; break; + case V4L2_CID_SHARPNESS: + /* 0b000, 0b100, 0b101, 0b110, or 0b111 */ + value = (ctl->value < 1 ? 0 : ((ctl->value + 3) << 7)); + /* needs to be set for both fields */ + cx_andor(MO_FILTER_EVEN, mask, value); + break; case V4L2_CID_CHROMA_AGC: /* Do not allow chroma AGC to be enabled for SECAM */ value = ((ctl->value - c->off) << c->shift) & c->mask; @@ -1161,7 +1204,6 @@ static int vidioc_querycap (struct file *file, void *priv, strcpy(cap->driver, "cx8800"); strlcpy(cap->card, core->board.name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); - cap->version = CX88_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | @@ -1480,7 +1522,6 @@ static int radio_querycap (struct file *file, void *priv, strcpy(cap->driver, "cx8800"); strlcpy(cap->card, core->board.name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci)); - cap->version = CX88_VERSION_CODE; cap->capabilities = V4L2_CAP_TUNER; return 0; } @@ -2139,14 +2180,8 @@ static struct pci_driver cx8800_pci_driver = { static int __init cx8800_init(void) { - printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n", - (CX88_VERSION_CODE >> 16) & 0xff, - (CX88_VERSION_CODE >> 8) & 0xff, - CX88_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %s loaded\n", + CX88_VERSION); return pci_register_driver(&cx8800_pci_driver); } @@ -2157,11 +2192,3 @@ static void __exit cx8800_fini(void) module_init(cx8800_init); module_exit(cx8800_fini); - -/* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index a399a8b..fa8d307 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -39,9 +39,9 @@ #include "cx88-reg.h" #include "tuner-xc2028.h" -#include <linux/version.h> #include <linux/mutex.h> -#define CX88_VERSION_CODE KERNEL_VERSION(0, 0, 8) + +#define CX88_VERSION "0.0.9" #define UNSET (-1U) @@ -242,6 +242,8 @@ extern const struct sram_channel const cx88_sram_channels[]; #define CX88_BOARD_SAMSUNG_SMT_7020 84 #define CX88_BOARD_TWINHAN_VP1027_DVBS 85 #define CX88_BOARD_TEVII_S464 86 +#define CX88_BOARD_WINFAST_DTV2000H_PLUS 87 +#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -375,6 +377,7 @@ struct cx88_core { u32 audiomode_manual; u32 audiomode_current; u32 input; + u32 last_analog_input; u32 astat; u32 use_nicam; unsigned long last_change; diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig index 6b19540..60a456e 100644 --- a/drivers/media/video/davinci/Kconfig +++ b/drivers/media/video/davinci/Kconfig @@ -91,3 +91,26 @@ config VIDEO_ISIF To compile this driver as a module, choose M here: the module will be called vpfe. + +config VIDEO_DM644X_VPBE + tristate "DM644X VPBE HW module" + depends on ARCH_DAVINCI_DM644x + select VIDEO_VPSS_SYSTEM + select VIDEOBUF_DMA_CONTIG + help + Enables VPBE modules used for display on a DM644x + SoC. + + To compile this driver as a module, choose M here: the + module will be called vpbe. + + +config VIDEO_VPBE_DISPLAY + tristate "VPBE V4L2 Display driver" + depends on ARCH_DAVINCI_DM644x + select VIDEO_DM644X_VPBE + help + Enables VPBE V4L2 Display driver on a DM644x device + + To compile this driver as a module, choose M here: the + module will be called vpbe_display. diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile index a379557..ae7dafb 100644 --- a/drivers/media/video/davinci/Makefile +++ b/drivers/media/video/davinci/Makefile @@ -16,3 +16,5 @@ obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o obj-$(CONFIG_VIDEO_ISIF) += isif.o +obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o +obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c new file mode 100644 index 0000000..d773d30 --- /dev/null +++ b/drivers/media/video/davinci/vpbe.c @@ -0,0 +1,864 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/err.h> + +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpss.h> +#include <media/davinci/vpbe_venc.h> + +#define VPBE_DEFAULT_OUTPUT "Composite" +#define VPBE_DEFAULT_MODE "ntsc" + +static char *def_output = VPBE_DEFAULT_OUTPUT; +static char *def_mode = VPBE_DEFAULT_MODE; +static int debug; + +module_param(def_output, charp, S_IRUGO); +module_param(def_mode, charp, S_IRUGO); +module_param(debug, int, 0644); + +MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)"); +MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc"); +MODULE_PARM_DESC(debug, "Debug level 0-1"); + +MODULE_DESCRIPTION("TI DMXXX VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); + +/** + * vpbe_current_encoder_info - Get config info for current encoder + * @vpbe_dev - vpbe device ptr + * + * Return ptr to current encoder config info + */ +static struct encoder_config_info* +vpbe_current_encoder_info(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int index = vpbe_dev->current_sd_index; + + return ((index == 0) ? &cfg->venc : + &cfg->ext_encoders[index-1]); +} + +/** + * vpbe_find_encoder_sd_index - Given a name find encoder sd index + * + * @vpbe_config - ptr to vpbe cfg + * @output_index - index used by application + * + * Return sd index of the encoder + */ +static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg, + int index) +{ + char *encoder_name = cfg->outputs[index].subdev_name; + int i; + + /* Venc is always first */ + if (!strcmp(encoder_name, cfg->venc.module_name)) + return 0; + + for (i = 0; i < cfg->num_ext_encoders; i++) { + if (!strcmp(encoder_name, + cfg->ext_encoders[i].module_name)) + return i+1; + } + + return -EINVAL; +} + +/** + * vpbe_g_cropcap - Get crop capabilities of the display + * @vpbe_dev - vpbe device ptr + * @cropcap - cropcap is a ptr to struct v4l2_cropcap + * + * Update the crop capabilities in crop cap for current + * mode + */ +static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev, + struct v4l2_cropcap *cropcap) +{ + if (NULL == cropcap) + return -EINVAL; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->defrect = cropcap->bounds; + + return 0; +} + +/** + * vpbe_enum_outputs - enumerate outputs + * @vpbe_dev - vpbe device ptr + * @output - ptr to v4l2_output structure + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev, + struct v4l2_output *output) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int temp_index = output->index; + + if (temp_index >= cfg->num_outputs) + return -EINVAL; + + *output = cfg->outputs[temp_index].output; + output->index = temp_index; + + return 0; +} + +static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + if (NULL == mode) + return -EINVAL; + + for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(mode, var.name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + if (NULL == mode_info) + return -EINVAL; + + *mode_info = vpbe_dev->current_timings; + + return 0; +} + +static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev, + unsigned int dv_preset) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if ((var.timings_type & VPBE_ENC_DV_PRESET) && + (var.timings.dv_preset == dv_preset)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +/* Get std by std id */ +static int vpbe_get_std_info(struct vpbe_device *vpbe_dev, + v4l2_std_id std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if ((var.timings_type & VPBE_ENC_STD) && + (var.timings.std_id & std_id)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev, + char *std_name) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + struct vpbe_enc_mode_info var; + int curr_output = vpbe_dev->current_out_index; + int i; + + for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { + var = cfg->outputs[curr_output].modes[i]; + if (!strcmp(var.name, std_name)) { + vpbe_dev->current_timings = var; + return 0; + } + } + + return -EINVAL; +} + +/** + * vpbe_set_output - Set output + * @vpbe_dev - vpbe device ptr + * @index - index of output + * + * Set vpbe output to the output specified by the index + */ +static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) +{ + struct encoder_config_info *curr_enc_info = + vpbe_current_encoder_info(vpbe_dev); + struct vpbe_config *cfg = vpbe_dev->cfg; + int enc_out_index; + int sd_index; + int ret = 0; + + if (index >= cfg->num_outputs) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + sd_index = vpbe_dev->current_sd_index; + enc_out_index = cfg->outputs[index].output.index; + /* + * Currently we switch the encoder based on output selected + * by the application. If media controller is implemented later + * there is will be an API added to setup_link between venc + * and external encoder. So in that case below comparison always + * match and encoder will not be switched. But if application + * chose not to use media controller, then this provides current + * way of switching encoder at the venc output. + */ + if (strcmp(curr_enc_info->module_name, + cfg->outputs[index].subdev_name)) { + /* Need to switch the encoder at the output */ + sd_index = vpbe_find_encoder_sd_index(cfg, index); + if (sd_index < 0) { + ret = -EINVAL; + goto out; + } + + if (ret) + goto out; + } + + /* Set output at the encoder */ + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_routing, 0, enc_out_index, 0); + if (ret) + goto out; + + /* + * It is assumed that venc or extenal encoder will set a default + * mode in the sub device. For external encoder or LCD pannel output, + * we also need to set up the lcd port for the required mode. So setup + * the lcd port for the default mode that is configured in the board + * arch/arm/mach-davinci/board-dm355-evm.setup file for the external + * encoder. + */ + ret = vpbe_get_mode_info(vpbe_dev, + cfg->outputs[index].default_mode); + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + vpbe_dev->current_sd_index = sd_index; + vpbe_dev->current_out_index = index; + } +out: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int ret = 0; + int i; + + for (i = 0; i < cfg->num_outputs; i++) { + if (!strcmp(def_output, + cfg->outputs[i].output.name)) { + ret = vpbe_set_output(vpbe_dev, i); + if (!ret) + vpbe_dev->current_out_index = i; + return ret; + } + } + return ret; +} + +/** + * vpbe_get_output - Get output + * @vpbe_dev - vpbe device ptr + * + * return current vpbe output to the the index + */ +static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev) +{ + return vpbe_dev->current_out_index; +} + +/** + * vpbe_s_dv_preset - Set the given preset timings in the encoder + * + * Sets the preset if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + int sd_index = vpbe_dev->current_sd_index; + int ret; + + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_PRESETS)) + return -EINVAL; + + ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset); + + if (ret) + return ret; + + mutex_lock(&vpbe_dev->lock); + + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_dv_preset, dv_preset); + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_dv_preset - Get the preset in the current encoder + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev, + struct v4l2_dv_preset *dv_preset) +{ + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_PRESET) { + dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev, + struct v4l2_dv_enum_preset *preset_info) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + struct vpbe_output *output = &cfg->outputs[out_index]; + int j = 0; + int i; + + if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS)) + return -EINVAL; + + for (i = 0; i < output->num_modes; i++) { + if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) { + if (j == preset_info->index) + break; + j++; + } + } + + if (i == output->num_modes) + return -EINVAL; + + return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset, + preset_info); +} + +/** + * vpbe_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) +{ + struct vpbe_config *cfg = vpbe_dev->cfg; + int out_index = vpbe_dev->current_out_index; + int sd_index = vpbe_dev->current_sd_index; + int ret; + + if (!(cfg->outputs[out_index].output.capabilities & + V4L2_OUT_CAP_STD)) + return -EINVAL; + + ret = vpbe_get_std_info(vpbe_dev, *std_id); + if (ret) + return ret; + + mutex_lock(&vpbe_dev->lock); + + ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, + s_std_output, *std_id); + /* set the lcd controller output for the given mode */ + if (!ret) { + struct osd_state *osd_device = vpbe_dev->osd_device; + + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + } + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +/** + * vpbe_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) +{ + struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings; + + if (cur_timings.timings_type & VPBE_ENC_STD) { + *std_id = cur_timings.timings.std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_set_mode - Set mode in the current encoder using mode info + * + * Use the mode string to decide what timings to set in the encoder + * This is typically useful when fbset command is used to change the current + * timings by specifying a string to indicate the timings. + */ +static int vpbe_set_mode(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info *mode_info) +{ + struct vpbe_enc_mode_info *preset_mode = NULL; + struct vpbe_config *cfg = vpbe_dev->cfg; + struct v4l2_dv_preset dv_preset; + struct osd_state *osd_device; + int out_index = vpbe_dev->current_out_index; + int ret = 0; + int i; + + if ((NULL == mode_info) || (NULL == mode_info->name)) + return -EINVAL; + + for (i = 0; i < cfg->outputs[out_index].num_modes; i++) { + if (!strcmp(mode_info->name, + cfg->outputs[out_index].modes[i].name)) { + preset_mode = &cfg->outputs[out_index].modes[i]; + /* + * it may be one of the 3 timings type. Check and + * invoke right API + */ + if (preset_mode->timings_type & VPBE_ENC_STD) + return vpbe_s_std(vpbe_dev, + &preset_mode->timings.std_id); + if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) { + dv_preset.preset = + preset_mode->timings.dv_preset; + return vpbe_s_dv_preset(vpbe_dev, &dv_preset); + } + } + } + + /* Only custom timing should reach here */ + if (preset_mode == NULL) + return -EINVAL; + + mutex_lock(&vpbe_dev->lock); + + osd_device = vpbe_dev->osd_device; + vpbe_dev->current_timings = *preset_mode; + osd_device->ops.set_left_margin(osd_device, + vpbe_dev->current_timings.left_margin); + osd_device->ops.set_top_margin(osd_device, + vpbe_dev->current_timings.upper_margin); + + mutex_unlock(&vpbe_dev->lock); + + return ret; +} + +static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev) +{ + int ret; + + ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode); + if (ret) + return ret; + + /* set the default mode in the encoder */ + return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings); +} + +static int platform_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_device *vpbe_dev = data; + + if (strcmp("vpbe-osd", pdev->name) == 0) + vpbe_dev->osd_device = platform_get_drvdata(pdev); + + return 0; +} + +/** + * vpbe_initialize() - Initialize the vpbe display controller + * @vpbe_dev - vpbe device ptr + * + * Master frame buffer device drivers calls this to initialize vpbe + * display controller. This will then registers v4l2 device and the sub + * devices and sets a current encoder sub device for display. v4l2 display + * device driver is the master and frame buffer display device driver is + * the slave. Frame buffer display driver checks the initialized during + * probe and exit if not initialized. Returns status. + */ +static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + struct encoder_config_info *enc_info; + struct v4l2_subdev **enc_subdev; + struct osd_state *osd_device; + struct i2c_adapter *i2c_adap; + int output_index; + int num_encoders; + int ret = 0; + int err; + int i; + + /* + * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer + * from the platform device by iteration of platform drivers and + * matching with device name + */ + if (NULL == vpbe_dev || NULL == dev) { + printk(KERN_ERR "Null device pointers.\n"); + return -ENODEV; + } + + if (vpbe_dev->initialized) + return 0; + + mutex_lock(&vpbe_dev->lock); + + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { + /* We have dac clock available for platform */ + vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac"); + if (IS_ERR(vpbe_dev->dac_clk)) { + ret = PTR_ERR(vpbe_dev->dac_clk); + goto vpbe_unlock; + } + if (clk_enable(vpbe_dev->dac_clk)) { + ret = -ENODEV; + goto vpbe_unlock; + } + } + + /* first enable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 1); + + /* First register a v4l2 device */ + ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev); + if (ret) { + v4l2_err(dev->driver, + "Unable to register v4l2 device.\n"); + goto vpbe_fail_clock; + } + v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n"); + + err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev, + platform_device_get); + if (err < 0) + return err; + + vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev, + vpbe_dev->cfg->venc.module_name); + /* register venc sub device */ + if (vpbe_dev->venc == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "vpbe unable to init venc sub device\n"); + ret = -ENODEV; + goto vpbe_fail_v4l2_device; + } + /* initialize osd device */ + osd_device = vpbe_dev->osd_device; + + if (NULL != osd_device->ops.initialize) { + err = osd_device->ops.initialize(osd_device); + if (err) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to initialize the OSD device"); + err = -ENOMEM; + goto vpbe_fail_v4l2_device; + } + } + + /* + * Register any external encoders that are configured. At index 0 we + * store venc sd index. + */ + num_encoders = vpbe_dev->cfg->num_ext_encoders + 1; + vpbe_dev->encoders = kmalloc( + sizeof(struct v4l2_subdev *)*num_encoders, + GFP_KERNEL); + if (NULL == vpbe_dev->encoders) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for encoders sub devices"); + ret = -ENOMEM; + goto vpbe_fail_v4l2_device; + } + + i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id); + for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) { + if (i == 0) { + /* venc is at index 0 */ + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = vpbe_dev->venc; + continue; + } + enc_info = &vpbe_dev->cfg->ext_encoders[i]; + if (enc_info->is_i2c) { + enc_subdev = &vpbe_dev->encoders[i]; + *enc_subdev = v4l2_i2c_new_subdev_board( + &vpbe_dev->v4l2_dev, i2c_adap, + &enc_info->board_info, NULL); + if (*enc_subdev) + v4l2_info(&vpbe_dev->v4l2_dev, + "v4l2 sub device %s registered\n", + enc_info->module_name); + else { + v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s" + " failed to register", + enc_info->module_name); + ret = -ENODEV; + goto vpbe_fail_sd_register; + } + } else + v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders" + " currently not supported"); + } + + /* set the current encoder and output to that of venc by default */ + vpbe_dev->current_sd_index = 0; + vpbe_dev->current_out_index = 0; + output_index = 0; + + mutex_unlock(&vpbe_dev->lock); + + printk(KERN_NOTICE "Setting default output to %s\n", def_output); + ret = vpbe_set_default_output(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s", + def_output); + return ret; + } + + printk(KERN_NOTICE "Setting default mode to %s\n", def_mode); + ret = vpbe_set_default_mode(vpbe_dev); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s", + def_mode); + return ret; + } + vpbe_dev->initialized = 1; + /* TBD handling of bootargs for default output and mode */ + return 0; + +vpbe_fail_sd_register: + kfree(vpbe_dev->encoders); +vpbe_fail_v4l2_device: + v4l2_device_unregister(&vpbe_dev->v4l2_dev); +vpbe_fail_clock: + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) + clk_put(vpbe_dev->dac_clk); +vpbe_unlock: + mutex_unlock(&vpbe_dev->lock); + return ret; +} + +/** + * vpbe_deinitialize() - de-initialize the vpbe display controller + * @dev - Master and slave device ptr + * + * vpbe_master and slave frame buffer devices calls this to de-initialize + * the display controller. It is called when master and slave device + * driver modules are removed and no longer requires the display controller. + */ +static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev) +{ + v4l2_device_unregister(&vpbe_dev->v4l2_dev); + if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) + clk_put(vpbe_dev->dac_clk); + + kfree(vpbe_dev->encoders); + vpbe_dev->initialized = 0; + /* disable vpss clocks */ + vpss_enable_clock(VPSS_VPBE_CLOCK, 0); +} + +static struct vpbe_device_ops vpbe_dev_ops = { + .g_cropcap = vpbe_g_cropcap, + .enum_outputs = vpbe_enum_outputs, + .set_output = vpbe_set_output, + .get_output = vpbe_get_output, + .s_dv_preset = vpbe_s_dv_preset, + .g_dv_preset = vpbe_g_dv_preset, + .enum_dv_presets = vpbe_enum_dv_presets, + .s_std = vpbe_s_std, + .g_std = vpbe_g_std, + .initialize = vpbe_initialize, + .deinitialize = vpbe_deinitialize, + .get_mode_info = vpbe_get_current_mode_info, + .set_mode = vpbe_set_mode, +}; + +static __devinit int vpbe_probe(struct platform_device *pdev) +{ + struct vpbe_device *vpbe_dev; + struct vpbe_config *cfg; + int ret = -EINVAL; + + if (pdev->dev.platform_data == NULL) { + v4l2_err(pdev->dev.driver, "No platform data\n"); + return -ENODEV; + } + cfg = pdev->dev.platform_data; + + if (!cfg->module_name[0] || + !cfg->osd.module_name[0] || + !cfg->venc.module_name[0]) { + v4l2_err(pdev->dev.driver, "vpbe display module names not" + " defined\n"); + return ret; + } + + vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL); + if (vpbe_dev == NULL) { + v4l2_err(pdev->dev.driver, "Unable to allocate memory" + " for vpbe_device\n"); + return -ENOMEM; + } + vpbe_dev->cfg = cfg; + vpbe_dev->ops = vpbe_dev_ops; + vpbe_dev->pdev = &pdev->dev; + + if (cfg->outputs->num_modes > 0) + vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0]; + else + return -ENODEV; + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, vpbe_dev); + mutex_init(&vpbe_dev->lock); + + return 0; +} + +static int vpbe_remove(struct platform_device *device) +{ + struct vpbe_device *vpbe_dev = platform_get_drvdata(device); + + kfree(vpbe_dev); + + return 0; +} + +static struct platform_driver vpbe_driver = { + .driver = { + .name = "vpbe_controller", + .owner = THIS_MODULE, + }, + .probe = vpbe_probe, + .remove = vpbe_remove, +}; + +/** + * vpbe_init: initialize the vpbe driver + * + * This function registers device and driver to the kernel + */ +static __init int vpbe_init(void) +{ + return platform_driver_register(&vpbe_driver); +} + +/** + * vpbe_cleanup : cleanup function for vpbe driver + * + * This will un-registers the device and driver to the kernel + */ +static void vpbe_cleanup(void) +{ + platform_driver_unregister(&vpbe_driver); +} + +/* Function for module initialization and cleanup */ +module_init(vpbe_init); +module_exit(vpbe_cleanup); diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c new file mode 100644 index 0000000..7f1d83a --- /dev/null +++ b/drivers/media/video/davinci/vpbe_display.c @@ -0,0 +1,1860 @@ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/time.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/mm.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <linux/slab.h> + +#include <asm/pgtable.h> +#include <mach/cputype.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_display.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe_osd.h> +#include "vpbe_venc_regs.h" + +#define VPBE_DISPLAY_DRIVER "vpbe-v4l2" + +static int debug; + +#define VPBE_DISPLAY_SD_BUF_SIZE (720*576*2) +#define VPBE_DEFAULT_NUM_BUFS 3 + +module_param(debug, int, 0644); + +static int venc_is_second_field(struct vpbe_display *disp_dev) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int ret; + int val; + + ret = v4l2_subdev_call(vpbe_dev->venc, + core, + ioctl, + VENC_GET_FLD, + &val); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in getting Field ID 0\n"); + } + return val; +} + +static void vpbe_isr_even_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct timespec timevalue; + + if (layer->cur_frm == layer->next_frm) + return; + ktime_get_ts(&timevalue); + layer->cur_frm->ts.tv_sec = timevalue.tv_sec; + layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC; + layer->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&layer->cur_frm->done); + /* Make cur_frm pointing to next_frm */ + layer->cur_frm = layer->next_frm; +} + +static void vpbe_isr_odd_field(struct vpbe_display *disp_obj, + struct vpbe_layer *layer) +{ + struct osd_state *osd_device = disp_obj->osd_device; + unsigned long addr; + + spin_lock(&disp_obj->dma_queue_lock); + if (list_empty(&layer->dma_queue) || + (layer->cur_frm != layer->next_frm)) { + spin_unlock(&disp_obj->dma_queue_lock); + return; + } + /* + * one field is displayed configure + * the next frame if it is available + * otherwise hold on current frame + * Get next from the buffer queue + */ + layer->next_frm = list_entry( + layer->dma_queue.next, + struct videobuf_buffer, + queue); + /* Remove that from the buffer queue */ + list_del(&layer->next_frm->queue); + spin_unlock(&disp_obj->dma_queue_lock); + /* Mark state of the frame to active */ + layer->next_frm->state = VIDEOBUF_ACTIVE; + addr = videobuf_to_dma_contig(layer->next_frm); + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_obj->cbcr_ofst); +} + +/* interrupt service routine */ +static irqreturn_t venc_isr(int irq, void *arg) +{ + struct vpbe_display *disp_dev = (struct vpbe_display *)arg; + struct vpbe_layer *layer; + static unsigned last_event; + unsigned event = 0; + int fid; + int i; + + if ((NULL == arg) || (NULL == disp_dev->dev[0])) + return IRQ_HANDLED; + + if (venc_is_second_field(disp_dev)) + event |= VENC_SECOND_FIELD; + else + event |= VENC_FIRST_FIELD; + + if (event == (last_event & ~VENC_END_OF_FRAME)) { + /* + * If the display is non-interlaced, then we need to flag the + * end-of-frame event at every interrupt regardless of the + * value of the FIDST bit. We can conclude that the display is + * non-interlaced if the value of the FIDST bit is unchanged + * from the previous interrupt. + */ + event |= VENC_END_OF_FRAME; + } else if (event == VENC_SECOND_FIELD) { + /* end-of-frame for interlaced display */ + event |= VENC_END_OF_FRAME; + } + last_event = event; + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + layer = disp_dev->dev[i]; + /* If streaming is started in this layer */ + if (!layer->started) + continue; + + if (layer->layer_first_int) { + layer->layer_first_int = 0; + continue; + } + /* Check the field format */ + if ((V4L2_FIELD_NONE == layer->pix_fmt.field) && + (event & VENC_END_OF_FRAME)) { + /* Progressive mode */ + + vpbe_isr_even_field(disp_dev, layer); + vpbe_isr_odd_field(disp_dev, layer); + } else { + /* Interlaced mode */ + + layer->field_id ^= 1; + if (event & VENC_FIRST_FIELD) + fid = 0; + else + fid = 1; + + /* + * If field id does not match with store + * field id + */ + if (fid != layer->field_id) { + /* Make them in sync */ + layer->field_id = fid; + continue; + } + /* + * device field id and local field id are + * in sync. If this is even field + */ + if (0 == fid) + vpbe_isr_even_field(disp_dev, layer); + else /* odd field */ + vpbe_isr_odd_field(disp_dev, layer); + } + } + + return IRQ_HANDLED; +} + +/* + * vpbe_buffer_prepare() + * This is the callback function called from videobuf_qbuf() function + * the buffer is prepared and user space virtual address is converted into + * physical address + */ +static int vpbe_buffer_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long addr; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_prepare\n"); + + /* If buffer is not initialized, initialize it */ + if (VIDEOBUF_NEEDS_INIT == vb->state) { + vb->width = layer->pix_fmt.width; + vb->height = layer->pix_fmt.height; + vb->size = layer->pix_fmt.sizeimage; + vb->field = field; + + ret = videobuf_iolock(q, vb, NULL); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \ + user address\n"); + return -EINVAL; + } + + addr = videobuf_to_dma_contig(vb); + + if (q->streaming) { + if (!IS_ALIGNED(addr, 8)) { + v4l2_err(&vpbe_dev->v4l2_dev, + "buffer_prepare:offset is \ + not aligned to 32 bytes\n"); + return -EINVAL; + } + } + vb->state = VIDEOBUF_PREPARED; + } + return 0; +} + +/* + * vpbe_buffer_setup() + * This function allocates memory for the buffers + */ +static int vpbe_buffer_setup(struct videobuf_queue *q, + unsigned int *count, + unsigned int *size) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n"); + + *size = layer->pix_fmt.sizeimage; + + /* Store number of buffers allocated in numbuffer member */ + if (*count < VPBE_DEFAULT_NUM_BUFS) + *count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS; + + return 0; +} + +/* + * vpbe_buffer_queue() + * This function adds the buffer to DMA queue + */ +static void vpbe_buffer_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned long flags; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_queue\n"); + + /* add the buffer to the DMA queue */ + spin_lock_irqsave(&disp->dma_queue_lock, flags); + list_add_tail(&vb->queue, &layer->dma_queue); + spin_unlock_irqrestore(&disp->dma_queue_lock, flags); + /* Change state of the buffer */ + vb->state = VIDEOBUF_QUEUED; +} + +/* + * vpbe_buffer_release() + * This function is called from the videobuf layer to free memory allocated to + * the buffers + */ +static void vpbe_buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + /* Get the file handle object and layer object */ + struct vpbe_fh *fh = q->priv_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe_buffer_release\n"); + + if (V4L2_MEMORY_USERPTR != layer->memory) + videobuf_dma_contig_free(q, vb); + + vb->state = VIDEOBUF_NEEDS_INIT; +} + +static struct videobuf_queue_ops video_qops = { + .buf_setup = vpbe_buffer_setup, + .buf_prepare = vpbe_buffer_prepare, + .buf_queue = vpbe_buffer_queue, + .buf_release = vpbe_buffer_release, +}; + +static +struct vpbe_layer* +_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + enum vpbe_display_device_id thiswin, otherwin; + thiswin = layer->device_id; + + otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ? + VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0; + return disp_dev->dev[otherwin]; +} + +static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, + struct vpbe_layer *layer) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + unsigned long addr; + int ret; + + addr = videobuf_to_dma_contig(layer->cur_frm); + /* Set address in the display registers */ + osd_device->ops.start_layer(osd_device, + layer->layer_info.id, + addr, + disp_dev->cbcr_ofst); + + ret = osd_device->ops.enable_layer(osd_device, + layer->layer_info.id, 0); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 0\n"); + return -1; + } + + /* Enable the window */ + layer->layer_info.enable = 1; + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + + ret = osd_device->ops.enable_layer(osd_device, + otherlayer->layer_info.id, 1); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in enabling osd window layer 1\n"); + return -1; + } + otherlayer->layer_info.enable = 1; + } + return 0; +} + +static void +vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int expected_xsize, int expected_ysize) +{ + struct display_layer_info *layer_info = &layer->layer_info; + struct v4l2_pix_format *pixfmt = &layer->pix_fmt; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int calculated_xsize; + int h_exp = 0; + int v_exp = 0; + int h_scale; + int v_scale; + + v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id; + + /* + * Application initially set the image format. Current display + * size is obtained from the vpbe display controller. expected_xsize + * and expected_ysize are set through S_CROP ioctl. Based on this, + * driver will calculate the scale factors for vertical and + * horizontal direction so that the image is displayed scaled + * and expanded. Application uses expansion to display the image + * in a square pixel. Otherwise it is displayed using displays + * pixel aspect ratio.It is expected that application chooses + * the crop coordinates for cropped or scaled display. if crop + * size is less than the image size, it is displayed cropped or + * it is displayed scaled and/or expanded. + * + * to begin with, set the crop window same as expected. Later we + * will override with scaled window size + */ + + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */ + layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */ + layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */ + + if (pixfmt->width < expected_xsize) { + h_scale = vpbe_dev->current_timings.xres / pixfmt->width; + if (h_scale < 2) + h_scale = 1; + else if (h_scale >= 4) + h_scale = 4; + else + h_scale = 2; + cfg->xsize *= h_scale; + if (cfg->xsize < expected_xsize) { + if ((standard_id & V4L2_STD_525_60) || + (standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->xsize * + VPBE_DISPLAY_H_EXP_RATIO_N) / + VPBE_DISPLAY_H_EXP_RATIO_D; + if (calculated_xsize <= expected_xsize) { + h_exp = 1; + cfg->xsize = calculated_xsize; + } + } + } + if (h_scale == 2) + layer_info->h_zoom = ZOOM_X2; + else if (h_scale == 4) + layer_info->h_zoom = ZOOM_X4; + if (h_exp) + layer_info->h_exp = H_EXP_9_OVER_8; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->xsize = expected_xsize; + } + + if (pixfmt->height < expected_ysize) { + v_scale = expected_ysize / pixfmt->height; + if (v_scale < 2) + v_scale = 1; + else if (v_scale >= 4) + v_scale = 4; + else + v_scale = 2; + cfg->ysize *= v_scale; + if (cfg->ysize < expected_ysize) { + if ((standard_id & V4L2_STD_625_50)) { + calculated_xsize = (cfg->ysize * + VPBE_DISPLAY_V_EXP_RATIO_N) / + VPBE_DISPLAY_V_EXP_RATIO_D; + if (calculated_xsize <= expected_ysize) { + v_exp = 1; + cfg->ysize = calculated_xsize; + } + } + } + if (v_scale == 2) + layer_info->v_zoom = ZOOM_X2; + else if (v_scale == 4) + layer_info->v_zoom = ZOOM_X4; + if (v_exp) + layer_info->h_exp = V_EXP_6_OVER_5; + } else { + /* no scaling, only cropping. Set display area to crop area */ + cfg->ysize = expected_ysize; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "crop display xsize = %d, ysize = %d\n", + cfg->xsize, cfg->ysize); +} + +static void vpbe_disp_adj_position(struct vpbe_display *disp_dev, + struct vpbe_layer *layer, + int top, int left) +{ + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + cfg->xpos = min((unsigned int)left, + vpbe_dev->current_timings.xres - cfg->xsize); + cfg->ypos = min((unsigned int)top, + vpbe_dev->current_timings.yres - cfg->ysize); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "new xpos = %d, ypos = %d\n", + cfg->xpos, cfg->ypos); +} + +static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev, + struct v4l2_rect *c) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + + if ((c->width == 0) || + ((c->width + c->left) > vpbe_dev->current_timings.xres)) + c->width = vpbe_dev->current_timings.xres - c->left; + + if ((c->height == 0) || ((c->height + c->top) > + vpbe_dev->current_timings.yres)) + c->height = vpbe_dev->current_timings.yres - c->top; + + /* window height must be even for interlaced display */ + if (vpbe_dev->current_timings.interlaced) + c->height &= (~0x01); + +} + +/** + * vpbe_try_format() + * If user application provides width and height, and have bytesperline set + * to zero, driver calculates bytesperline and sizeimage based on hardware + * limits. + */ +static int vpbe_try_format(struct vpbe_display *disp_dev, + struct v4l2_pix_format *pixfmt, int check) +{ + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + int min_height = 1; + int min_width = 32; + int max_height; + int max_width; + int bpp; + + if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) && + (pixfmt->pixelformat != V4L2_PIX_FMT_NV12)) + /* choose default as V4L2_PIX_FMT_UYVY */ + pixfmt->pixelformat = V4L2_PIX_FMT_UYVY; + + /* Check the field format */ + if ((pixfmt->field != V4L2_FIELD_INTERLACED) && + (pixfmt->field != V4L2_FIELD_NONE)) { + if (vpbe_dev->current_timings.interlaced) + pixfmt->field = V4L2_FIELD_INTERLACED; + else + pixfmt->field = V4L2_FIELD_NONE; + } + + if (pixfmt->field == V4L2_FIELD_INTERLACED) + min_height = 2; + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + bpp = 1; + else + bpp = 2; + + max_width = vpbe_dev->current_timings.xres; + max_height = vpbe_dev->current_timings.yres; + + min_width /= bpp; + + if (!pixfmt->width || (pixfmt->width < min_width) || + (pixfmt->width > max_width)) { + pixfmt->width = vpbe_dev->current_timings.xres; + } + + if (!pixfmt->height || (pixfmt->height < min_height) || + (pixfmt->height > max_height)) { + pixfmt->height = vpbe_dev->current_timings.yres; + } + + if (pixfmt->bytesperline < (pixfmt->width * bpp)) + pixfmt->bytesperline = pixfmt->width * bpp; + + /* Make the bytesperline 32 byte aligned */ + pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31); + + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height + + (pixfmt->bytesperline * pixfmt->height >> 1); + else + pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; + + return 0; +} + +static int vpbe_display_g_priority(struct file *file, void *priv, + enum v4l2_priority *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + + *p = v4l2_prio_max(&layer->prio); + + return 0; +} + +static int vpbe_display_s_priority(struct file *file, void *priv, + enum v4l2_priority p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + int ret; + + ret = v4l2_prio_change(&layer->prio, &fh->prio, p); + + return ret; +} + +static int vpbe_display_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + cap->version = VPBE_DISPLAY_VERSION_CODE; + cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; + strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver)); + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info)); + strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card)); + + return 0; +} + +static int vpbe_display_s_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct osd_state *osd_device = disp_dev->osd_device; + struct v4l2_rect *rect = &crop->c; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_CROP, layer id = %d\n", layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + return -EINVAL; + } + + if (rect->top < 0) + rect->top = 0; + if (rect->left < 0) + rect->left = 0; + + vpbe_disp_check_window_params(disp_dev, rect); + + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + vpbe_disp_calculate_scale_factor(disp_dev, layer, + rect->width, + rect->height); + vpbe_disp_adj_position(disp_dev, layer, rect->top, + rect->left); + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set layer config:\n"); + return -EINVAL; + } + + /* apply zooming and h or v expansion */ + osd_device->ops.set_zoom(osd_device, + layer->layer_info.id, + layer->layer_info.h_zoom, + layer->layer_info.v_zoom); + ret = osd_device->ops.set_vid_expansion(osd_device, + layer->layer_info.h_exp, + layer->layer_info.v_exp); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in set vid expansion:\n"); + return -EINVAL; + } + + if ((layer->layer_info.h_zoom != ZOOM_X1) || + (layer->layer_info.v_zoom != ZOOM_X1) || + (layer->layer_info.h_exp != H_EXP_OFF) || + (layer->layer_info.v_exp != V_EXP_OFF)) + /* Enable expansion filter */ + osd_device->ops.set_interpolation_filter(osd_device, 1); + else + osd_device->ops.set_interpolation_filter(osd_device, 0); + + return 0; +} + +static int vpbe_display_g_crop(struct file *file, void *priv, + struct v4l2_crop *crop) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + struct v4l2_rect *rect = &crop->c; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_CROP, layer id = %d\n", + layer->device_id); + + if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n"); + ret = -EINVAL; + } + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + rect->top = cfg->ypos; + rect->left = cfg->xpos; + rect->width = cfg->xsize; + rect->height = cfg->ysize; + + return 0; +} + +static int vpbe_display_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cropcap) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n"); + + cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + cropcap->bounds.left = 0; + cropcap->bounds.top = 0; + cropcap->bounds.width = vpbe_dev->current_timings.xres; + cropcap->bounds.height = vpbe_dev->current_timings.yres; + cropcap->pixelaspect = vpbe_dev->current_timings.aspect; + cropcap->defrect = cropcap->bounds; + return 0; +} + +static int vpbe_display_g_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_G_FMT, layer id = %d\n", + layer->device_id); + + /* If buffer type is video output */ + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Fill in the information about format */ + fmt->fmt.pix = layer->pix_fmt; + + return 0; +} + +static int vpbe_display_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int index = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_ENUM_FMT, layer id = %d\n", + layer->device_id); + if (fmt->index > 1) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n"); + return -EINVAL; + } + + /* Fill in the information about format */ + index = fmt->index; + memset(fmt, 0, sizeof(*fmt)); + fmt->index = index; + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + if (index == 0) { + strcpy(fmt->description, "YUV 4:2:2 - UYVY"); + fmt->pixelformat = V4L2_PIX_FMT_UYVY; + } else { + strcpy(fmt->description, "Y/CbCr 4:2:0"); + fmt->pixelformat = V4L2_PIX_FMT_NV12; + } + + return 0; +} + +static int vpbe_display_s_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_S_FMT, layer id = %d\n", + layer->device_id); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + /* Check for valid pixel format */ + ret = vpbe_try_format(disp_dev, pixfmt, 1); + if (ret) + return ret; + + /* YUV420 is requested, check availability of the + other video window */ + + layer->pix_fmt = *pixfmt; + + /* Get osd layer config */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + /* Store the pixel format in the layer object */ + cfg->xsize = pixfmt->width; + cfg->ysize = pixfmt->height; + cfg->line_length = pixfmt->bytesperline; + cfg->ypos = 0; + cfg->xpos = 0; + cfg->interlaced = vpbe_dev->current_timings.interlaced; + + if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat) + cfg->pixfmt = PIXFMT_YCbCrI; + + /* Change of the default pixel format for both video windows */ + if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) { + struct vpbe_layer *otherlayer; + cfg->pixfmt = PIXFMT_NV12; + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, + layer); + otherlayer->layer_info.config.pixfmt = PIXFMT_NV12; + } + + /* Set the layer config in the osd window */ + ret = osd_device->ops.set_layer_config(osd_device, + layer->layer_info.id, cfg); + if (ret < 0) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Error in S_FMT params:\n"); + return -EINVAL; + } + + /* Readback and fill the local copy of current pix format */ + osd_device->ops.get_layer_config(osd_device, + layer->layer_info.id, cfg); + + return 0; +} + +static int vpbe_display_try_fmt(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); + return -EINVAL; + } + + /* Check for valid field format */ + return vpbe_try_format(disp_dev, pixfmt, 0); + +} + +/** + * vpbe_display_s_std - Set the given standard in the encoder + * + * Sets the standard if supported by the current encoder. Return the status. + * 0 - success & -EINVAL on error + */ +static int vpbe_display_s_std(struct file *file, void *priv, + v4l2_std_id *std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n"); + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL != vpbe_dev->ops.s_std) { + ret = vpbe_dev->ops.s_std(vpbe_dev, std_id); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set standard for sub devices\n"); + return -EINVAL; + } + } else { + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_std - Get the standard in the current encoder + * + * Get the standard in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int vpbe_display_g_std(struct file *file, void *priv, + v4l2_std_id *std_id) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n"); + + /* Get the standard from the current encoder */ + if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { + *std_id = vpbe_dev->current_timings.timings.std_id; + return 0; + } + + return -EINVAL; +} + +/** + * vpbe_display_enum_output - enumerate outputs + * + * Enumerates the outputs available at the vpbe display + * returns the status, -EINVAL if end of output list + */ +static int vpbe_display_enum_output(struct file *file, void *priv, + struct v4l2_output *output) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n"); + + /* Enumerate outputs */ + + if (NULL == vpbe_dev->ops.enum_outputs) + return -EINVAL; + + ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output); + if (ret) { + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "Failed to enumerate outputs\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_output - Set output to + * the output specified by the index + */ +static int vpbe_display_s_output(struct file *file, void *priv, + unsigned int i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n"); + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + if (NULL == vpbe_dev->ops.set_output) + return -EINVAL; + + ret = vpbe_dev->ops.set_output(vpbe_dev, i); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set output for sub devices\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_g_output - Get output from subdevice + * for a given by the index + */ +static int vpbe_display_g_output(struct file *file, void *priv, + unsigned int *i) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n"); + /* Get the standard from the current encoder */ + *i = vpbe_dev->current_out_index; + + return 0; +} + +/** + * vpbe_display_enum_dv_presets - Enumerate the dv presets + * + * enum the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n"); + + /* Enumerate outputs */ + if (NULL == vpbe_dev->ops.enum_dv_presets) + return -EINVAL; + + ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to enumerate dv presets info\n"); + return -EINVAL; + } + + return 0; +} + +/** + * vpbe_display_s_dv_preset - Set the dv presets + * + * Set the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n"); + + + /* If streaming is started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n"); + return -EBUSY; + } + + /* Set the given standard in the encoder */ + if (NULL != vpbe_dev->ops.s_dv_preset) + return -EINVAL; + + ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "Failed to set the dv presets info\n"); + return -EINVAL; + } + /* set the current norm to zero to be consistent. If STD is used + * v4l2 layer will set the norm properly on successful s_std call + */ + layer->video_dev.current_norm = 0; + + return 0; +} + +/** + * vpbe_display_g_dv_preset - Set the dv presets + * + * Get the preset in the current encoder. Return the status. 0 - success + * -EINVAL on error + */ +static int +vpbe_display_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *dv_preset) +{ + struct vpbe_fh *fh = priv; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n"); + + /* Get the given standard in the encoder */ + + if (vpbe_dev->current_timings.timings_type & + VPBE_ENC_DV_PRESET) { + dv_preset->preset = + vpbe_dev->current_timings.timings.dv_preset; + } else { + return -EINVAL; + } + + return 0; +} + +static int vpbe_display_streamoff(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = fh->disp_dev->osd_device; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_STREAMOFF,layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io is allowed for this file handle, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + /* If streaming is not started, return error */ + if (!layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer" + " id = %d\n", layer->device_id); + return -EINVAL; + } + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + ret = videobuf_streamoff(&layer->buffer_queue); + + return ret; +} + +static int vpbe_display_streamon(struct file *file, void *priv, + enum v4l2_buf_type buf_type) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int ret; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If file handle is not allowed IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + /* If Streaming is already started, return error */ + if (layer->started) { + v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n"); + return -EBUSY; + } + + /* + * Call videobuf_streamon to start streaming + * in videobuf + */ + ret = videobuf_streamon(&layer->buffer_queue); + if (ret) { + v4l2_err(&vpbe_dev->v4l2_dev, + "error in videobuf_streamon\n"); + return ret; + } + /* If buffer queue is empty, return error */ + if (list_empty(&layer->dma_queue)) { + v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n"); + goto streamoff; + } + /* Get the next frame from the buffer queue */ + layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next, + struct videobuf_buffer, queue); + /* Remove buffer from the buffer queue */ + list_del(&layer->cur_frm->queue); + /* Mark state of the current frame to active */ + layer->cur_frm->state = VIDEOBUF_ACTIVE; + /* Initialize field_id and started member */ + layer->field_id = 0; + + /* Set parameters in OSD and VENC */ + ret = vpbe_set_osd_display_params(disp_dev, layer); + if (ret < 0) + goto streamoff; + + /* + * if request format is yuv420 semiplanar, need to + * enable both video windows + */ + layer->started = 1; + + layer->layer_first_int = 1; + + return ret; +streamoff: + ret = videobuf_streamoff(&layer->buffer_queue); + return ret; +} + +static int vpbe_display_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_DQBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + if (file->f_flags & O_NONBLOCK) + /* Call videobuf_dqbuf for non blocking mode */ + ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1); + else + /* Call videobuf_dqbuf for blocking mode */ + ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0); + + return ret; +} + +static int vpbe_display_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If this file handle is not allowed to do IO, return error */ + if (!fh->io_allowed) { + v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n"); + return -EACCES; + } + + return videobuf_qbuf(&layer->buffer_queue, p); +} + +static int vpbe_display_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "VIDIOC_QUERYBUF, layer id = %d\n", + layer->device_id); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* Call videobuf_querybuf to get information */ + ret = videobuf_querybuf(&layer->buffer_queue, buf); + + return ret; +} + +static int vpbe_display_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *req_buf) +{ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + int ret; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n"); + + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) { + v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n"); + return -EINVAL; + } + + /* If io users of the layer is not zero, return error */ + if (0 != layer->io_usrs) { + v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n"); + return -EBUSY; + } + /* Initialize videobuf queue as per the buffer type */ + videobuf_queue_dma_contig_init(&layer->buffer_queue, + &video_qops, + vpbe_dev->pdev, + &layer->irqlock, + V4L2_BUF_TYPE_VIDEO_OUTPUT, + layer->pix_fmt.field, + sizeof(struct videobuf_buffer), + fh, NULL); + + /* Set io allowed member of file handle to TRUE */ + fh->io_allowed = 1; + /* Increment io usrs member of layer object to 1 */ + layer->io_usrs = 1; + /* Store type of memory requested in layer object */ + layer->memory = req_buf->memory; + /* Initialize buffer queue */ + INIT_LIST_HEAD(&layer->dma_queue); + /* Allocate buffers */ + ret = videobuf_reqbufs(&layer->buffer_queue, req_buf); + + return ret; +} + +/* + * vpbe_display_mmap() + * It is used to map kernel space buffers into user spaces + */ +static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n"); + + return videobuf_mmap_mapper(&layer->buffer_queue, vma); +} + +/* vpbe_display_poll(): It is used for select/poll system call + */ +static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait) +{ + struct vpbe_fh *fh = filep->private_data; + struct vpbe_layer *layer = fh->layer; + struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev; + unsigned int err = 0; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n"); + if (layer->started) + err = videobuf_poll_stream(filep, &layer->buffer_queue, wait); + return err; +} + +/* + * vpbe_display_open() + * It creates object of file handle structure and stores it in private_data + * member of filepointer + */ +static int vpbe_display_open(struct file *file) +{ + struct vpbe_fh *fh = NULL; + struct vpbe_layer *layer = video_drvdata(file); + struct vpbe_display *disp_dev = layer->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + int err; + + /* Allocate memory for the file handle object */ + fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL); + if (fh == NULL) { + v4l2_err(&vpbe_dev->v4l2_dev, + "unable to allocate memory for file handle object\n"); + return -ENOMEM; + } + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display open plane = %d\n", + layer->device_id); + + /* store pointer to fh in private_data member of filep */ + file->private_data = fh; + fh->layer = layer; + fh->disp_dev = disp_dev; + + if (!layer->usrs) { + + /* First claim the layer for this device */ + err = osd_device->ops.request_layer(osd_device, + layer->layer_info.id); + if (err < 0) { + /* Couldn't get layer */ + v4l2_err(&vpbe_dev->v4l2_dev, + "Display Manager failed to allocate layer\n"); + kfree(fh); + return -EINVAL; + } + } + /* Increment layer usrs counter */ + layer->usrs++; + /* Set io_allowed member to false */ + fh->io_allowed = 0; + /* Initialize priority of this instance to default priority */ + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&layer->prio, &fh->prio); + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, + "vpbe display device opened successfully\n"); + return 0; +} + +/* + * vpbe_display_release() + * This function deletes buffer queue, frees the buffers and the davinci + * display file * handle + */ +static int vpbe_display_release(struct file *file) +{ + /* Get the layer object and file handle object */ + struct vpbe_fh *fh = file->private_data; + struct vpbe_layer *layer = fh->layer; + struct osd_layer_config *cfg = &layer->layer_info.config; + struct vpbe_display *disp_dev = fh->disp_dev; + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct osd_state *osd_device = disp_dev->osd_device; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); + + /* if this instance is doing IO */ + if (fh->io_allowed) { + /* Reset io_usrs member of layer object */ + layer->io_usrs = 0; + + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + layer->started = 0; + /* Free buffers allocated */ + videobuf_queue_cancel(&layer->buffer_queue); + videobuf_mmap_free(&layer->buffer_queue); + } + + /* Decrement layer usrs counter */ + layer->usrs--; + /* If this file handle has initialize encoder device, reset it */ + if (!layer->usrs) { + if (cfg->pixfmt == PIXFMT_NV12) { + struct vpbe_layer *otherlayer; + otherlayer = + _vpbe_display_get_other_win_layer(disp_dev, layer); + osd_device->ops.disable_layer(osd_device, + otherlayer->layer_info.id); + osd_device->ops.release_layer(osd_device, + otherlayer->layer_info.id); + } + osd_device->ops.disable_layer(osd_device, + layer->layer_info.id); + osd_device->ops.release_layer(osd_device, + layer->layer_info.id); + } + /* Close the priority */ + v4l2_prio_close(&layer->prio, fh->prio); + file->private_data = NULL; + + /* Free memory allocated to file handle object */ + kfree(fh); + + disp_dev->cbcr_ofst = 0; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vpbe_display_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct v4l2_dbg_match *match = ®->match; + + if (match->type >= 2) { + v4l2_subdev_call(vpbe_dev->venc, + core, + g_register, + reg); + } + + return 0; +} + +static int vpbe_display_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + return 0; +} +#endif + +/* vpbe capture ioctl operations */ +static const struct v4l2_ioctl_ops vpbe_ioctl_ops = { + .vidioc_querycap = vpbe_display_querycap, + .vidioc_g_fmt_vid_out = vpbe_display_g_fmt, + .vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt, + .vidioc_s_fmt_vid_out = vpbe_display_s_fmt, + .vidioc_try_fmt_vid_out = vpbe_display_try_fmt, + .vidioc_reqbufs = vpbe_display_reqbufs, + .vidioc_querybuf = vpbe_display_querybuf, + .vidioc_qbuf = vpbe_display_qbuf, + .vidioc_dqbuf = vpbe_display_dqbuf, + .vidioc_streamon = vpbe_display_streamon, + .vidioc_streamoff = vpbe_display_streamoff, + .vidioc_cropcap = vpbe_display_cropcap, + .vidioc_g_crop = vpbe_display_g_crop, + .vidioc_s_crop = vpbe_display_s_crop, + .vidioc_g_priority = vpbe_display_g_priority, + .vidioc_s_priority = vpbe_display_s_priority, + .vidioc_s_std = vpbe_display_s_std, + .vidioc_g_std = vpbe_display_g_std, + .vidioc_enum_output = vpbe_display_enum_output, + .vidioc_s_output = vpbe_display_s_output, + .vidioc_g_output = vpbe_display_g_output, + .vidioc_s_dv_preset = vpbe_display_s_dv_preset, + .vidioc_g_dv_preset = vpbe_display_g_dv_preset, + .vidioc_enum_dv_presets = vpbe_display_enum_dv_presets, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpbe_display_g_register, + .vidioc_s_register = vpbe_display_s_register, +#endif +}; + +static struct v4l2_file_operations vpbe_fops = { + .owner = THIS_MODULE, + .open = vpbe_display_open, + .release = vpbe_display_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vpbe_display_mmap, + .poll = vpbe_display_poll +}; + +static int vpbe_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct vpbe_display *vpbe_disp = data; + + if (strcmp("vpbe_controller", pdev->name) == 0) + vpbe_disp->vpbe_dev = platform_get_drvdata(pdev); + + if (strcmp("vpbe-osd", pdev->name) == 0) + vpbe_disp->osd_device = platform_get_drvdata(pdev); + + return 0; +} + +static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev, + struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer = NULL; + struct video_device *vbd = NULL; + + /* Allocate memory for four plane display objects */ + + disp_dev->dev[i] = + kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL); + + /* If memory allocation fails, return error */ + if (!disp_dev->dev[i]) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + spin_lock_init(&disp_dev->dev[i]->irqlock); + mutex_init(&disp_dev->dev[i]->opslock); + + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + vbd = &vpbe_display_layer->video_dev; + /* Initialize field of video device */ + vbd->release = video_device_release_empty; + vbd->fops = &vpbe_fops; + vbd->ioctl_ops = &vpbe_ioctl_ops; + vbd->minor = -1; + vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; + vbd->lock = &vpbe_display_layer->opslock; + + if (disp_dev->vpbe_dev->current_timings.timings_type & + VPBE_ENC_STD) { + vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50); + vbd->current_norm = + disp_dev->vpbe_dev-> + current_timings.timings.std_id; + } else + vbd->current_norm = 0; + + snprintf(vbd->name, sizeof(vbd->name), + "DaVinci_VPBE Display_DRIVER_V%d.%d.%d", + (VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff, + (VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff, + (VPBE_DISPLAY_VERSION_CODE) & 0xff); + + vpbe_display_layer->device_id = i; + + vpbe_display_layer->layer_info.id = + ((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1); + + /* Initialize prio member of layer object */ + v4l2_prio_init(&vpbe_display_layer->prio); + + return 0; +} + +static __devinit int register_device(struct vpbe_layer *vpbe_display_layer, + struct vpbe_display *disp_dev, + struct platform_device *pdev) { + int err; + + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "Trying to register VPBE display device.\n"); + v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, + "layer=%x,layer->video_dev=%x\n", + (int)vpbe_display_layer, + (int)&vpbe_display_layer->video_dev); + + err = video_register_device(&vpbe_display_layer->video_dev, + VFL_TYPE_GRABBER, + -1); + if (err) + return -ENODEV; + + vpbe_display_layer->disp_dev = disp_dev; + /* set the driver data in platform device */ + platform_set_drvdata(pdev, disp_dev); + video_set_drvdata(&vpbe_display_layer->video_dev, + vpbe_display_layer); + + return 0; +} + + + +/* + * vpbe_display_probe() + * This function creates device entries by register itself to the V4L2 driver + * and initializes fields of each layer objects + */ +static __devinit int vpbe_display_probe(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev; + struct resource *res = NULL; + int k; + int i; + int err; + int irq; + + printk(KERN_DEBUG "vpbe_display_probe\n"); + /* Allocate memory for vpbe_display */ + disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL); + if (!disp_dev) { + printk(KERN_ERR "ran out of memory\n"); + return -ENOMEM; + } + + spin_lock_init(&disp_dev->dma_queue_lock); + /* + * Scan all the platform devices to find the vpbe + * controller device and get the vpbe_dev object + */ + err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev, + vpbe_device_get); + if (err < 0) + return err; + /* Initialize the vpbe display controller */ + if (NULL != disp_dev->vpbe_dev->ops.initialize) { + err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev, + disp_dev->vpbe_dev); + if (err) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Error initing vpbe\n"); + err = -ENOMEM; + goto probe_out; + } + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (init_vpbe_layer(i, disp_dev, pdev)) { + err = -ENODEV; + goto probe_out; + } + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to get VENC interrupt resource\n"); + err = -ENODEV; + goto probe_out; + } + + irq = res->start; + if (request_irq(irq, venc_isr, IRQF_DISABLED, VPBE_DISPLAY_DRIVER, + disp_dev)) { + v4l2_err(&disp_dev->vpbe_dev->v4l2_dev, + "Unable to request interrupt\n"); + err = -ENODEV; + goto probe_out; + } + + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + if (register_device(disp_dev->dev[i], disp_dev, pdev)) { + err = -ENODEV; + goto probe_out; + } + } + + printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n"); + return 0; + +probe_out: + free_irq(res->start, disp_dev); + for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[k]; + /* Unregister video device */ + if (vpbe_display_layer) { + video_unregister_device( + &vpbe_display_layer->video_dev); + kfree(disp_dev->dev[k]); + } + } + kfree(disp_dev); + return err; +} + +/* + * vpbe_display_remove() + * It un-register hardware layer from V4L2 driver + */ +static int vpbe_display_remove(struct platform_device *pdev) +{ + struct vpbe_layer *vpbe_display_layer; + struct vpbe_display *disp_dev = platform_get_drvdata(pdev); + struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; + struct resource *res; + int i; + + v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n"); + + /* unregister irq */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + free_irq(res->start, disp_dev); + + /* deinitialize the vpbe display controller */ + if (NULL != vpbe_dev->ops.deinitialize) + vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev); + /* un-register device */ + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + /* Get the pointer to the layer object */ + vpbe_display_layer = disp_dev->dev[i]; + /* Unregister video device */ + video_unregister_device(&vpbe_display_layer->video_dev); + + } + for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { + kfree(disp_dev->dev[i]); + disp_dev->dev[i] = NULL; + } + + return 0; +} + +static struct platform_driver vpbe_display_driver = { + .driver = { + .name = VPBE_DISPLAY_DRIVER, + .owner = THIS_MODULE, + .bus = &platform_bus_type, + }, + .probe = vpbe_display_probe, + .remove = __devexit_p(vpbe_display_remove), +}; + +/* + * vpbe_display_init() + * This function registers device and driver to the kernel, requests irq + * handler and allocates memory for layer objects + */ +static __devinit int vpbe_display_init(void) +{ + int err; + + printk(KERN_DEBUG "vpbe_display_init\n"); + + /* Register driver to the kernel */ + err = platform_driver_register(&vpbe_display_driver); + if (0 != err) + return err; + + printk(KERN_DEBUG "vpbe_display_init:" + "VPBE V4L2 Display Driver V1.0 loaded\n"); + return 0; +} + +/* + * vpbe_display_cleanup() + * This function un-registers device and driver to the kernel, frees requested + * irq handler and de-allocates memory allocated for layer objects. + */ +static void vpbe_display_cleanup(void) +{ + printk(KERN_DEBUG "vpbe_display_cleanup\n"); + + /* platform driver unregister */ + platform_driver_unregister(&vpbe_display_driver); +} + +/* Function for module initialization and cleanup */ +module_init(vpbe_display_init); +module_exit(vpbe_display_cleanup); + +MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c new file mode 100644 index 0000000..5352884 --- /dev/null +++ b/drivers/media/video/davinci/vpbe_osd.c @@ -0,0 +1,1231 @@ +/* + * Copyright (C) 2007-2010 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/slab.h> + +#include <mach/io.h> +#include <mach/cputype.h> +#include <mach/hardware.h> + +#include <media/davinci/vpss.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_osd.h> + +#include <linux/io.h> +#include "vpbe_osd_regs.h" + +#define MODULE_NAME VPBE_OSD_SUBDEV_NAME + +/* register access routines */ +static inline u32 osd_read(struct osd_state *sd, u32 offset) +{ + struct osd_state *osd = sd; + + return readl(osd->osd_base + offset); +} + +static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset) +{ + struct osd_state *osd = sd; + + writel(val, osd->osd_base + offset); + + return val; +} + +static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 val = readl(addr) | mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 val = readl(addr) & ~mask; + + writel(val, addr); + + return val; +} + +static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val, + u32 offset) +{ + struct osd_state *osd = sd; + + u32 addr = osd->osd_base + offset; + u32 new_val = (readl(addr) & ~mask) | (val & mask); + + writel(new_val, addr); + + return new_val; +} + +/* define some macros for layer and pixfmt classification */ +#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1)) +#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1)) +#define is_rgb_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888)) +#define is_yc_pixfmt(pixfmt) \ + (((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \ + ((pixfmt) == PIXFMT_NV12)) +#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X +#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5) + +/** + * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446 + * @sd - ptr to struct osd_state + * @field_inversion - inversion flag + * @fb_base_phys - frame buffer address + * @lconfig - ptr to layer config + * + * This routine implements a workaround for the field signal inversion silicon + * erratum described in Advisory 1.3.8 for the DM6446. The fb_base_phys and + * lconfig parameters apply to the vid0 window. This routine should be called + * whenever the vid0 layer configuration or start address is modified, or when + * the OSD field inversion setting is modified. + * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or + * 0 otherwise + */ +static int _osd_dm6446_vid0_pingpong(struct osd_state *sd, + int field_inversion, + unsigned long fb_base_phys, + const struct osd_layer_config *lconfig) +{ + struct osd_platform_data *pdata; + + pdata = (struct osd_platform_data *)sd->dev->platform_data; + if (pdata->field_inv_wa_enable) { + + if (!field_inversion || !lconfig->interlaced) { + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR); + osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0, + OSD_MISCCTL); + return 0; + } else { + unsigned miscctl = OSD_MISCCTL_PPRV; + + osd_write(sd, + (fb_base_phys & ~0x1F) - lconfig->line_length, + OSD_VIDWIN0ADR); + osd_write(sd, + (fb_base_phys & ~0x1F) + lconfig->line_length, + OSD_PPVWIN0ADR); + osd_modify(sd, + OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl, + OSD_MISCCTL); + + return 1; + } + } + + return 0; +} + +static void _osd_set_field_inversion(struct osd_state *sd, int enable) +{ + unsigned fsinv = 0; + + if (enable) + fsinv = OSD_MODE_FSINV; + + osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE); +} + +static void _osd_set_blink_attribute(struct osd_state *sd, int enable, + enum osd_blink_interval blink) +{ + u32 osdatrmd = 0; + + if (enable) { + osdatrmd |= OSD_OSDATRMD_BLNK; + osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT; + } + /* caller must ensure that OSD1 is configured in attribute mode */ + osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd, + OSD_OSDATRMD); +} + +static void _osd_set_rom_clut(struct osd_state *sd, + enum osd_rom_clut rom_clut) +{ + if (rom_clut == ROM_CLUT0) + osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); + else + osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); +} + +static void _osd_set_palette_map(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned char pixel_value, + unsigned char clut_index, + enum osd_pix_format pixfmt) +{ + static const int map_2bpp[] = { 0, 5, 10, 15 }; + static const int map_1bpp[] = { 0, 15 }; + int bmp_offset; + int bmp_shift; + int bmp_mask; + int bmp_reg; + + switch (pixfmt) { + case PIXFMT_1BPP: + bmp_reg = map_1bpp[pixel_value & 0x1]; + break; + case PIXFMT_2BPP: + bmp_reg = map_2bpp[pixel_value & 0x3]; + break; + case PIXFMT_4BPP: + bmp_reg = pixel_value & 0xf; + break; + default: + return; + } + + switch (osdwin) { + case OSDWIN_OSD0: + bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + case OSDWIN_OSD1: + bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32); + break; + default: + return; + } + + if (bmp_reg & 1) { + bmp_shift = 8; + bmp_mask = 0xff << 8; + } else { + bmp_shift = 0; + bmp_mask = 0xff; + } + + osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset); +} + +static void _osd_set_rec601_attenuation(struct osd_state *sd, + enum osd_win_layer osdwin, int enable) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_ATN0E, + enable ? OSD_OSDWIN0MD_ATN0E : 0, + OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_ATN1E, + enable ? OSD_OSDWIN1MD_ATN1E : 0, + OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_blending_factor(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_blending_factor blend) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_modify(sd, OSD_OSDWIN0MD_BLND0, + blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_modify(sd, OSD_OSDWIN1MD_BLND1, + blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_enable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin, + unsigned colorkey, + enum osd_pix_format pixfmt) +{ + switch (pixfmt) { + case PIXFMT_RGB565: + osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS, + OSD_TRANSPVAL); + break; + default: + break; + } + + switch (osdwin) { + case OSDWIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_disable_color_key(struct osd_state *sd, + enum osd_win_layer osdwin) +{ + switch (osdwin) { + case OSDWIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_osd_clut(struct osd_state *sd, + enum osd_win_layer osdwin, + enum osd_clut clut) +{ + u32 winmd = 0; + + switch (osdwin) { + case OSDWIN_OSD0: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN0MD_CLUTS0; + osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD); + break; + case OSDWIN_OSD1: + if (clut == RAM_CLUT) + winmd |= OSD_OSDWIN1MD_CLUTS1; + osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD); + break; + } +} + +static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom) +{ + u32 winmd = 0; + + switch (layer) { + case WIN_OSD0: + winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT); + osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd, + OSD_OSDWIN0MD); + break; + case WIN_VID0: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd, + OSD_VIDWINMD); + break; + case WIN_OSD1: + winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT); + winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT); + osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT); + winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT); + osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd, + OSD_VIDWINMD); + break; + } +} + +static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* disable attribute mode as well as disabling the window */ + osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + win->is_enabled = 0; + + _osd_disable_layer(sd, layer); + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void _osd_enable_attribute_mode(struct osd_state *sd) +{ + /* enable attribute mode for OSD1 */ + osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD); +} + +static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer) +{ + switch (layer) { + case WIN_OSD0: + osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); + break; + case WIN_VID0: + osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); + break; + case WIN_OSD1: + /* enable OSD1 and disable attribute mode */ + osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, + OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD); + break; + case WIN_VID1: + osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); + break; + } +} + +static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer, + int otherwin) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + /* + * use otherwin flag to know this is the other vid window + * in YUV420 mode, if is, skip this check + */ + if (!otherwin && (!win->is_allocated || + !win->fb_base_phys || + !cfg->line_length || + !cfg->xsize || + !cfg->ysize)) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + + if (win->is_enabled) { + spin_unlock_irqrestore(&osd->lock, flags); + return 0; + } + win->is_enabled = 1; + + if (cfg->pixfmt != PIXFMT_OSD_ATTR) + _osd_enable_layer(sd, layer); + else { + _osd_enable_attribute_mode(sd); + _osd_set_blink_attribute(sd, osd->is_blinking, osd->blink); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + switch (layer) { + case WIN_OSD0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR); + break; + case WIN_VID0: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); + break; + case WIN_OSD1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR); + break; + case WIN_VID1: + osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR); + break; + } +} + +static void osd_start_layer(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->fb_base_phys = fb_base_phys & ~0x1F; + _osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + *lconfig = win->lconfig; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +/** + * try_layer_config() - Try a specific configuration for the layer + * @sd - ptr to struct osd_state + * @layer - layer to configure + * @lconfig - layer configuration to try + * + * If the requested lconfig is completely rejected and the value of lconfig on + * exit is the current lconfig, then try_layer_config() returns 1. Otherwise, + * try_layer_config() returns 0. A return value of 0 does not necessarily mean + * that the value of lconfig on exit is identical to the value of lconfig on + * entry, but merely that it represents a change from the current lconfig. + */ +static int try_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + int bad_config; + + /* verify that the pixel format is compatible with the layer */ + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + case PIXFMT_2BPP: + case PIXFMT_4BPP: + case PIXFMT_8BPP: + case PIXFMT_RGB565: + bad_config = !is_osd_win(layer); + break; + case PIXFMT_YCbCrI: + case PIXFMT_YCrCbI: + bad_config = !is_vid_win(layer); + break; + case PIXFMT_RGB888: + bad_config = !is_vid_win(layer); + break; + case PIXFMT_NV12: + bad_config = 1; + break; + case PIXFMT_OSD_ATTR: + bad_config = (layer != WIN_OSD1); + break; + default: + bad_config = 1; + break; + } + if (bad_config) { + /* + * The requested pixel format is incompatible with the layer, + * so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return bad_config; + } + + /* DM6446: */ + /* only one OSD window at a time can use RGB pixel formats */ + if (is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) { + enum osd_pix_format pixfmt; + if (layer == WIN_OSD0) + pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt; + + if (is_rgb_pixfmt(pixfmt)) { + /* + * The other OSD window is already configured for an + * RGB, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* DM6446: only one video window at a time can use RGB888 */ + if (is_vid_win(layer) && lconfig->pixfmt == PIXFMT_RGB888) { + enum osd_pix_format pixfmt; + + if (layer == WIN_VID0) + pixfmt = osd->win[WIN_VID1].lconfig.pixfmt; + else + pixfmt = osd->win[WIN_VID0].lconfig.pixfmt; + + if (pixfmt == PIXFMT_RGB888) { + /* + * The other video window is already configured for + * RGB888, so keep the current layer configuration. + */ + *lconfig = win->lconfig; + return 1; + } + } + + /* window dimensions must be non-zero */ + if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) { + *lconfig = win->lconfig; + return 1; + } + + /* round line_length up to a multiple of 32 */ + lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32; + lconfig->line_length = + min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH); + lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE); + lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE); + lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE); + lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE); + lconfig->interlaced = (lconfig->interlaced != 0); + if (lconfig->interlaced) { + /* ysize and ypos must be even for interlaced displays */ + lconfig->ysize &= ~1; + lconfig->ypos &= ~1; + } + + return 0; +} + +static void _osd_disable_vid_rgb888(struct osd_state *sd) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine disables RGB888 pixel format for both video windows. + * The caller must ensure that neither video window is currently + * configured for RGB888 pixel format. + */ + osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL); +} + +static void _osd_enable_vid_rgb888(struct osd_state *sd, + enum osd_layer layer) +{ + /* + * The DM6446 supports RGB888 pixel format in a single video window. + * This routine enables RGB888 pixel format for the specified video + * window. The caller must ensure that the other video window is not + * currently configured for RGB888 pixel format, as this routine will + * disable RGB888 pixel format for the other window. + */ + if (layer == WIN_VID0) { + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN, OSD_MISCCTL); + } else if (layer == WIN_VID1) { + osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, + OSD_MISCCTL); + } +} + +static void _osd_set_cbcr_order(struct osd_state *sd, + enum osd_pix_format pixfmt) +{ + /* + * The caller must ensure that all windows using YC pixfmt use the same + * Cb/Cr order. + */ + if (pixfmt == PIXFMT_YCbCrI) + osd_clear(sd, OSD_MODE_CS, OSD_MODE); + else if (pixfmt == PIXFMT_YCrCbI) + osd_set(sd, OSD_MODE_CS, OSD_MODE); +} + +static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + const struct osd_layer_config *lconfig) +{ + u32 winmd = 0, winmd_mask = 0, bmw = 0; + + _osd_set_cbcr_order(sd, lconfig->pixfmt); + + switch (layer) { + case WIN_OSD0: + winmd_mask |= OSD_OSDWIN0MD_RGB0E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN0MD_RGB0E; + + winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT); + + if (lconfig->interlaced) + winmd |= OSD_OSDWIN0MD_OFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL); + } + break; + case WIN_VID0: + winmd_mask |= OSD_VIDWINMD_VFF0; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF0; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL); + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); + } + break; + case WIN_OSD1: + /* + * The caller must ensure that OSD1 is disabled prior to + * switching from a normal mode to attribute mode or from + * attribute mode to a normal mode. + */ + if (lconfig->pixfmt == PIXFMT_OSD_ATTR) { + winmd_mask |= + OSD_OSDWIN1MD_ATN1E | OSD_OSDWIN1MD_RGB1E | + OSD_OSDWIN1MD_CLUTS1 | + OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1; + } else { + winmd_mask |= OSD_OSDWIN1MD_RGB1E; + if (lconfig->pixfmt == PIXFMT_RGB565) + winmd |= OSD_OSDWIN1MD_RGB1E; + + winmd_mask |= OSD_OSDWIN1MD_BMW1; + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + bmw = 0; + break; + case PIXFMT_2BPP: + bmw = 1; + break; + case PIXFMT_4BPP: + bmw = 2; + break; + case PIXFMT_8BPP: + bmw = 3; + break; + default: + break; + } + winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT); + } + + winmd_mask |= OSD_OSDWIN1MD_OFF1; + if (lconfig->interlaced) + winmd |= OSD_OSDWIN1MD_OFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD); + osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL); + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL); + } else { + osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL); + } + break; + case WIN_VID1: + winmd_mask |= OSD_VIDWINMD_VFF1; + if (lconfig->interlaced) + winmd |= OSD_VIDWINMD_VFF1; + + osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); + osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST); + osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); + osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); + /* + * For YUV420P format the register contents are + * duplicated in both VID registers + */ + osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D, + OSD_MISCCTL); + + if (lconfig->interlaced) { + osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL); + } else { + osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); + osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); + } + break; + } +} + +static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + int reject_config; + + spin_lock_irqsave(&osd->lock, flags); + + reject_config = try_layer_config(sd, layer, lconfig); + if (reject_config) { + spin_unlock_irqrestore(&osd->lock, flags); + return reject_config; + } + + /* update the current Cb/Cr order */ + if (is_yc_pixfmt(lconfig->pixfmt)) + osd->yc_pixfmt = lconfig->pixfmt; + + /* + * If we are switching OSD1 from normal mode to attribute mode or from + * attribute mode to normal mode, then we must disable the window. + */ + if (layer == WIN_OSD1) { + if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) || + ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR))) { + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + } + } + + _osd_set_layer_config(sd, layer, lconfig); + + if (layer == WIN_OSD1) { + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[OSDWIN_OSD1]; + + if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && + (cfg->pixfmt == PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from attribute mode to normal + * mode, so we must initialize the CLUT select, the + * blend factor, transparency colorkey enable, and + * attenuation enable (DM6446 only) bits in the + * OSDWIN1MD register. + */ + _osd_set_osd_clut(sd, OSDWIN_OSD1, + osdwin_state->clut); + _osd_set_blending_factor(sd, OSDWIN_OSD1, + osdwin_state->blend); + if (osdwin_state->colorkey_blending) { + _osd_enable_color_key(sd, OSDWIN_OSD1, + osdwin_state-> + colorkey, + lconfig->pixfmt); + } else + _osd_disable_color_key(sd, OSDWIN_OSD1); + _osd_set_rec601_attenuation(sd, OSDWIN_OSD1, + osdwin_state-> + rec601_attenuation); + } else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) && + (cfg->pixfmt != PIXFMT_OSD_ATTR)) { + /* + * We just switched OSD1 from normal mode to attribute + * mode, so we must initialize the blink enable and + * blink interval bits in the OSDATRMD register. + */ + _osd_set_blink_attribute(sd, osd->is_blinking, + osd->blink); + } + } + + /* + * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format + * then configure a default palette map. + */ + if ((lconfig->pixfmt != cfg->pixfmt) && + ((lconfig->pixfmt == PIXFMT_1BPP) || + (lconfig->pixfmt == PIXFMT_2BPP) || + (lconfig->pixfmt == PIXFMT_4BPP))) { + enum osd_win_layer osdwin = + ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1); + struct osd_osdwin_state *osdwin_state = + &osd->osdwin[osdwin]; + unsigned char clut_index; + unsigned char clut_entries = 0; + + switch (lconfig->pixfmt) { + case PIXFMT_1BPP: + clut_entries = 2; + break; + case PIXFMT_2BPP: + clut_entries = 4; + break; + case PIXFMT_4BPP: + clut_entries = 16; + break; + default: + break; + } + /* + * The default palette map maps the pixel value to the clut + * index, i.e. pixel value 0 maps to clut entry 0, pixel value + * 1 maps to clut entry 1, etc. + */ + for (clut_index = 0; clut_index < 16; clut_index++) { + osdwin_state->palette_map[clut_index] = clut_index; + if (clut_index < clut_entries) { + _osd_set_palette_map(sd, osdwin, clut_index, + clut_index, + lconfig->pixfmt); + } + } + } + + *cfg = *lconfig; + /* DM6446: configure the RGB888 enable and window selection */ + if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID0); + else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888) + _osd_enable_vid_rgb888(sd, WIN_VID1); + else + _osd_disable_vid_rgb888(sd); + + if (layer == WIN_VID0) { + osd->pingpong = + _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, + win->fb_base_phys, + cfg); + } + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void osd_init_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + enum osd_win_layer osdwin; + struct osd_osdwin_state *osdwin_state; + struct osd_layer_config *cfg = &win->lconfig; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + win->is_enabled = 0; + _osd_disable_layer(sd, layer); + + win->h_zoom = ZOOM_X1; + win->v_zoom = ZOOM_X1; + _osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom); + + win->fb_base_phys = 0; + _osd_start_layer(sd, layer, win->fb_base_phys, 0); + + cfg->line_length = 0; + cfg->xsize = 0; + cfg->ysize = 0; + cfg->xpos = 0; + cfg->ypos = 0; + cfg->interlaced = 0; + switch (layer) { + case WIN_OSD0: + case WIN_OSD1: + osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1; + osdwin_state = &osd->osdwin[osdwin]; + /* + * Other code relies on the fact that OSD windows default to a + * bitmap pixel format when they are deallocated, so don't + * change this default pixel format. + */ + cfg->pixfmt = PIXFMT_8BPP; + _osd_set_layer_config(sd, layer, cfg); + osdwin_state->clut = RAM_CLUT; + _osd_set_osd_clut(sd, osdwin, osdwin_state->clut); + osdwin_state->colorkey_blending = 0; + _osd_disable_color_key(sd, osdwin); + osdwin_state->blend = OSD_8_VID_0; + _osd_set_blending_factor(sd, osdwin, osdwin_state->blend); + osdwin_state->rec601_attenuation = 0; + _osd_set_rec601_attenuation(sd, osdwin, + osdwin_state-> + rec601_attenuation); + if (osdwin == OSDWIN_OSD1) { + osd->is_blinking = 0; + osd->blink = BLINK_X1; + } + break; + case WIN_VID0: + case WIN_VID1: + cfg->pixfmt = osd->yc_pixfmt; + _osd_set_layer_config(sd, layer, cfg); + break; + } + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static void osd_release_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (!win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return; + } + + spin_unlock_irqrestore(&osd->lock, flags); + osd_init_layer(sd, layer); + spin_lock_irqsave(&osd->lock, flags); + + win->is_allocated = 0; + + spin_unlock_irqrestore(&osd->lock, flags); +} + +static int osd_request_layer(struct osd_state *sd, enum osd_layer layer) +{ + struct osd_state *osd = sd; + struct osd_window_state *win = &osd->win[layer]; + unsigned long flags; + + spin_lock_irqsave(&osd->lock, flags); + + if (win->is_allocated) { + spin_unlock_irqrestore(&osd->lock, flags); + return -1; + } + win->is_allocated = 1; + + spin_unlock_irqrestore(&osd->lock, flags); + + return 0; +} + +static void _osd_init(struct osd_state *sd) +{ + osd_write(sd, 0, OSD_MODE); + osd_write(sd, 0, OSD_VIDWINMD); + osd_write(sd, 0, OSD_OSDWIN0MD); + osd_write(sd, 0, OSD_OSDWIN1MD); + osd_write(sd, 0, OSD_RECTCUR); + osd_write(sd, 0, OSD_MISCCTL); +} + +static void osd_set_left_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPX); +} + +static void osd_set_top_margin(struct osd_state *sd, u32 val) +{ + osd_write(sd, val, OSD_BASEPY); +} + +static int osd_initialize(struct osd_state *osd) +{ + if (osd == NULL) + return -ENODEV; + _osd_init(osd); + + /* set default Cb/Cr order */ + osd->yc_pixfmt = PIXFMT_YCbCrI; + + _osd_set_field_inversion(osd, osd->field_inversion); + _osd_set_rom_clut(osd, osd->rom_clut); + + osd_init_layer(osd, WIN_OSD0); + osd_init_layer(osd, WIN_VID0); + osd_init_layer(osd, WIN_OSD1); + osd_init_layer(osd, WIN_VID1); + + return 0; +} + +static const struct vpbe_osd_ops osd_ops = { + .initialize = osd_initialize, + .request_layer = osd_request_layer, + .release_layer = osd_release_layer, + .enable_layer = osd_enable_layer, + .disable_layer = osd_disable_layer, + .set_layer_config = osd_set_layer_config, + .get_layer_config = osd_get_layer_config, + .start_layer = osd_start_layer, + .set_left_margin = osd_set_left_margin, + .set_top_margin = osd_set_top_margin, +}; + +static int osd_probe(struct platform_device *pdev) +{ + struct osd_platform_data *pdata; + struct osd_state *osd; + struct resource *res; + int ret = 0; + + osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL); + if (osd == NULL) + return -ENOMEM; + + osd->dev = &pdev->dev; + pdata = (struct osd_platform_data *)pdev->dev.platform_data; + osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type; + if (NULL == pdev->dev.platform_data) { + dev_err(osd->dev, "No platform data defined for OSD" + " sub device\n"); + ret = -ENOENT; + goto free_mem; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(osd->dev, "Unable to get OSD register address map\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base_phys = res->start; + osd->osd_size = res->end - res->start + 1; + if (!request_mem_region(osd->osd_base_phys, osd->osd_size, + MODULE_NAME)) { + dev_err(osd->dev, "Unable to reserve OSD MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + osd->osd_base = (unsigned long)ioremap_nocache(res->start, + osd->osd_size); + if (!osd->osd_base) { + dev_err(osd->dev, "Unable to map the OSD region\n"); + ret = -ENODEV; + goto release_mem_region; + } + spin_lock_init(&osd->lock); + osd->ops = osd_ops; + platform_set_drvdata(pdev, osd); + dev_notice(osd->dev, "OSD sub device probe success\n"); + return ret; + +release_mem_region: + release_mem_region(osd->osd_base_phys, osd->osd_size); +free_mem: + kfree(osd); + return ret; +} + +static int osd_remove(struct platform_device *pdev) +{ + struct osd_state *osd = platform_get_drvdata(pdev); + + iounmap((void *)osd->osd_base); + release_mem_region(osd->osd_base_phys, osd->osd_size); + kfree(osd); + return 0; +} + +static struct platform_driver osd_driver = { + .probe = osd_probe, + .remove = osd_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, +}; + +static int osd_init(void) +{ + if (platform_driver_register(&osd_driver)) { + printk(KERN_ERR "Unable to register davinci osd driver\n"); + return -ENODEV; + } + + return 0; +} + +static void osd_exit(void) +{ + platform_driver_unregister(&osd_driver); +} + +module_init(osd_init); +module_exit(osd_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DaVinci OSD Manager Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/video/davinci/vpbe_osd_regs.h new file mode 100644 index 0000000..584520f --- /dev/null +++ b/drivers/media/video/davinci/vpbe_osd_regs.h @@ -0,0 +1,364 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_OSD_REGS_H +#define _VPBE_OSD_REGS_H + +/* VPBE Global Registers */ +#define VPBE_PID 0x0 +#define VPBE_PCR 0x4 + +/* VPSS CLock Registers */ +#define VPSSCLK_PID 0x00 +#define VPSSCLK_CLKCTRL 0x04 + +/* VPSS Buffer Logic Registers */ +#define VPSSBL_PID 0x00 +#define VPSSBL_PCR 0x04 +#define VPSSBL_BCR 0x08 +#define VPSSBL_INTSTAT 0x0C +#define VPSSBL_INTSEL 0x10 +#define VPSSBL_EVTSEL 0x14 +#define VPSSBL_MEMCTRL 0x18 +#define VPSSBL_CCDCMUX 0x1C + +/* DM365 ISP5 system configuration */ +#define ISP5_PID 0x0 +#define ISP5_PCCR 0x4 +#define ISP5_BCR 0x8 +#define ISP5_INTSTAT 0xC +#define ISP5_INTSEL1 0x10 +#define ISP5_INTSEL2 0x14 +#define ISP5_INTSEL3 0x18 +#define ISP5_EVTSEL 0x1c +#define ISP5_CCDCMUX 0x20 + +/* VPBE On-Screen Display Subsystem Registers (OSD) */ +#define OSD_MODE 0x00 +#define OSD_VIDWINMD 0x04 +#define OSD_OSDWIN0MD 0x08 +#define OSD_OSDWIN1MD 0x0C +#define OSD_OSDATRMD 0x0C +#define OSD_RECTCUR 0x10 +#define OSD_VIDWIN0OFST 0x18 +#define OSD_VIDWIN1OFST 0x1C +#define OSD_OSDWIN0OFST 0x20 +#define OSD_OSDWIN1OFST 0x24 +#define OSD_VIDWINADH 0x28 +#define OSD_VIDWIN0ADL 0x2C +#define OSD_VIDWIN0ADR 0x2C +#define OSD_VIDWIN1ADL 0x30 +#define OSD_VIDWIN1ADR 0x30 +#define OSD_OSDWINADH 0x34 +#define OSD_OSDWIN0ADL 0x38 +#define OSD_OSDWIN0ADR 0x38 +#define OSD_OSDWIN1ADL 0x3C +#define OSD_OSDWIN1ADR 0x3C +#define OSD_BASEPX 0x40 +#define OSD_BASEPY 0x44 +#define OSD_VIDWIN0XP 0x48 +#define OSD_VIDWIN0YP 0x4C +#define OSD_VIDWIN0XL 0x50 +#define OSD_VIDWIN0YL 0x54 +#define OSD_VIDWIN1XP 0x58 +#define OSD_VIDWIN1YP 0x5C +#define OSD_VIDWIN1XL 0x60 +#define OSD_VIDWIN1YL 0x64 +#define OSD_OSDWIN0XP 0x68 +#define OSD_OSDWIN0YP 0x6C +#define OSD_OSDWIN0XL 0x70 +#define OSD_OSDWIN0YL 0x74 +#define OSD_OSDWIN1XP 0x78 +#define OSD_OSDWIN1YP 0x7C +#define OSD_OSDWIN1XL 0x80 +#define OSD_OSDWIN1YL 0x84 +#define OSD_CURXP 0x88 +#define OSD_CURYP 0x8C +#define OSD_CURXL 0x90 +#define OSD_CURYL 0x94 +#define OSD_W0BMP01 0xA0 +#define OSD_W0BMP23 0xA4 +#define OSD_W0BMP45 0xA8 +#define OSD_W0BMP67 0xAC +#define OSD_W0BMP89 0xB0 +#define OSD_W0BMPAB 0xB4 +#define OSD_W0BMPCD 0xB8 +#define OSD_W0BMPEF 0xBC +#define OSD_W1BMP01 0xC0 +#define OSD_W1BMP23 0xC4 +#define OSD_W1BMP45 0xC8 +#define OSD_W1BMP67 0xCC +#define OSD_W1BMP89 0xD0 +#define OSD_W1BMPAB 0xD4 +#define OSD_W1BMPCD 0xD8 +#define OSD_W1BMPEF 0xDC +#define OSD_VBNDRY 0xE0 +#define OSD_EXTMODE 0xE4 +#define OSD_MISCCTL 0xE8 +#define OSD_CLUTRAMYCB 0xEC +#define OSD_CLUTRAMCR 0xF0 +#define OSD_TRANSPVAL 0xF4 +#define OSD_TRANSPVALL 0xF4 +#define OSD_TRANSPVALU 0xF8 +#define OSD_TRANSPBMPIDX 0xFC +#define OSD_PPVWIN0ADR 0xFC + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VPSSBL_INTSTAT_HSSIINT (1 << 14) +#define VPSSBL_INTSTAT_CFALDINT (1 << 13) +#define VPSSBL_INTSTAT_IPIPE_INT5 (1 << 12) +#define VPSSBL_INTSTAT_IPIPE_INT4 (1 << 11) +#define VPSSBL_INTSTAT_IPIPE_INT3 (1 << 10) +#define VPSSBL_INTSTAT_IPIPE_INT2 (1 << 9) +#define VPSSBL_INTSTAT_IPIPE_INT1 (1 << 8) +#define VPSSBL_INTSTAT_IPIPE_INT0 (1 << 7) +#define VPSSBL_INTSTAT_IPIPEIFINT (1 << 6) +#define VPSSBL_INTSTAT_OSDINT (1 << 5) +#define VPSSBL_INTSTAT_VENCINT (1 << 4) +#define VPSSBL_INTSTAT_H3AINT (1 << 3) +#define VPSSBL_INTSTAT_CCDC_VDINT2 (1 << 2) +#define VPSSBL_INTSTAT_CCDC_VDINT1 (1 << 1) +#define VPSSBL_INTSTAT_CCDC_VDINT0 (1 << 0) + +/* DM365 ISP5 bit definitions */ +#define ISP5_INTSTAT_VENCINT (1 << 21) +#define ISP5_INTSTAT_OSDINT (1 << 20) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define OSD_MODE_CS (1 << 15) +#define OSD_MODE_OVRSZ (1 << 14) +#define OSD_MODE_OHRSZ (1 << 13) +#define OSD_MODE_EF (1 << 12) +#define OSD_MODE_VVRSZ (1 << 11) +#define OSD_MODE_VHRSZ (1 << 10) +#define OSD_MODE_FSINV (1 << 9) +#define OSD_MODE_BCLUT (1 << 8) +#define OSD_MODE_CABG_SHIFT 0 +#define OSD_MODE_CABG (0xff << 0) + +#define OSD_VIDWINMD_VFINV (1 << 15) +#define OSD_VIDWINMD_V1EFC (1 << 14) +#define OSD_VIDWINMD_VHZ1_SHIFT 12 +#define OSD_VIDWINMD_VHZ1 (3 << 12) +#define OSD_VIDWINMD_VVZ1_SHIFT 10 +#define OSD_VIDWINMD_VVZ1 (3 << 10) +#define OSD_VIDWINMD_VFF1 (1 << 9) +#define OSD_VIDWINMD_ACT1 (1 << 8) +#define OSD_VIDWINMD_V0EFC (1 << 6) +#define OSD_VIDWINMD_VHZ0_SHIFT 4 +#define OSD_VIDWINMD_VHZ0 (3 << 4) +#define OSD_VIDWINMD_VVZ0_SHIFT 2 +#define OSD_VIDWINMD_VVZ0 (3 << 2) +#define OSD_VIDWINMD_VFF0 (1 << 1) +#define OSD_VIDWINMD_ACT0 (1 << 0) + +#define OSD_OSDWIN0MD_ATN0E (1 << 14) +#define OSD_OSDWIN0MD_RGB0E (1 << 13) +#define OSD_OSDWIN0MD_BMP0MD_SHIFT 13 +#define OSD_OSDWIN0MD_BMP0MD (3 << 13) +#define OSD_OSDWIN0MD_CLUTS0 (1 << 12) +#define OSD_OSDWIN0MD_OHZ0_SHIFT 10 +#define OSD_OSDWIN0MD_OHZ0 (3 << 10) +#define OSD_OSDWIN0MD_OVZ0_SHIFT 8 +#define OSD_OSDWIN0MD_OVZ0 (3 << 8) +#define OSD_OSDWIN0MD_BMW0_SHIFT 6 +#define OSD_OSDWIN0MD_BMW0 (3 << 6) +#define OSD_OSDWIN0MD_BLND0_SHIFT 3 +#define OSD_OSDWIN0MD_BLND0 (7 << 3) +#define OSD_OSDWIN0MD_TE0 (1 << 2) +#define OSD_OSDWIN0MD_OFF0 (1 << 1) +#define OSD_OSDWIN0MD_OACT0 (1 << 0) + +#define OSD_OSDWIN1MD_OASW (1 << 15) +#define OSD_OSDWIN1MD_ATN1E (1 << 14) +#define OSD_OSDWIN1MD_RGB1E (1 << 13) +#define OSD_OSDWIN1MD_BMP1MD_SHIFT 13 +#define OSD_OSDWIN1MD_BMP1MD (3 << 13) +#define OSD_OSDWIN1MD_CLUTS1 (1 << 12) +#define OSD_OSDWIN1MD_OHZ1_SHIFT 10 +#define OSD_OSDWIN1MD_OHZ1 (3 << 10) +#define OSD_OSDWIN1MD_OVZ1_SHIFT 8 +#define OSD_OSDWIN1MD_OVZ1 (3 << 8) +#define OSD_OSDWIN1MD_BMW1_SHIFT 6 +#define OSD_OSDWIN1MD_BMW1 (3 << 6) +#define OSD_OSDWIN1MD_BLND1_SHIFT 3 +#define OSD_OSDWIN1MD_BLND1 (7 << 3) +#define OSD_OSDWIN1MD_TE1 (1 << 2) +#define OSD_OSDWIN1MD_OFF1 (1 << 1) +#define OSD_OSDWIN1MD_OACT1 (1 << 0) + +#define OSD_OSDATRMD_OASW (1 << 15) +#define OSD_OSDATRMD_OHZA_SHIFT 10 +#define OSD_OSDATRMD_OHZA (3 << 10) +#define OSD_OSDATRMD_OVZA_SHIFT 8 +#define OSD_OSDATRMD_OVZA (3 << 8) +#define OSD_OSDATRMD_BLNKINT_SHIFT 6 +#define OSD_OSDATRMD_BLNKINT (3 << 6) +#define OSD_OSDATRMD_OFFA (1 << 1) +#define OSD_OSDATRMD_BLNK (1 << 0) + +#define OSD_RECTCUR_RCAD_SHIFT 8 +#define OSD_RECTCUR_RCAD (0xff << 8) +#define OSD_RECTCUR_CLUTSR (1 << 7) +#define OSD_RECTCUR_RCHW_SHIFT 4 +#define OSD_RECTCUR_RCHW (7 << 4) +#define OSD_RECTCUR_RCVW_SHIFT 1 +#define OSD_RECTCUR_RCVW (7 << 1) +#define OSD_RECTCUR_RCACT (1 << 0) + +#define OSD_VIDWIN0OFST_V0LO (0x1ff << 0) + +#define OSD_VIDWIN1OFST_V1LO (0x1ff << 0) + +#define OSD_OSDWIN0OFST_O0LO (0x1ff << 0) + +#define OSD_OSDWIN1OFST_O1LO (0x1ff << 0) + +#define OSD_WINOFST_AH_SHIFT 9 + +#define OSD_VIDWIN0OFST_V0AH (0xf << 9) +#define OSD_VIDWIN1OFST_V1AH (0xf << 9) +#define OSD_OSDWIN0OFST_O0AH (0xf << 9) +#define OSD_OSDWIN1OFST_O1AH (0xf << 9) + +#define OSD_VIDWINADH_V1AH_SHIFT 8 +#define OSD_VIDWINADH_V1AH (0x7f << 8) +#define OSD_VIDWINADH_V0AH_SHIFT 0 +#define OSD_VIDWINADH_V0AH (0x7f << 0) + +#define OSD_VIDWIN0ADL_V0AL (0xffff << 0) + +#define OSD_VIDWIN1ADL_V1AL (0xffff << 0) + +#define OSD_OSDWINADH_O1AH_SHIFT 8 +#define OSD_OSDWINADH_O1AH (0x7f << 8) +#define OSD_OSDWINADH_O0AH_SHIFT 0 +#define OSD_OSDWINADH_O0AH (0x7f << 0) + +#define OSD_OSDWIN0ADL_O0AL (0xffff << 0) + +#define OSD_OSDWIN1ADL_O1AL (0xffff << 0) + +#define OSD_BASEPX_BPX (0x3ff << 0) + +#define OSD_BASEPY_BPY (0x1ff << 0) + +#define OSD_VIDWIN0XP_V0X (0x7ff << 0) + +#define OSD_VIDWIN0YP_V0Y (0x7ff << 0) + +#define OSD_VIDWIN0XL_V0W (0x7ff << 0) + +#define OSD_VIDWIN0YL_V0H (0x7ff << 0) + +#define OSD_VIDWIN1XP_V1X (0x7ff << 0) + +#define OSD_VIDWIN1YP_V1Y (0x7ff << 0) + +#define OSD_VIDWIN1XL_V1W (0x7ff << 0) + +#define OSD_VIDWIN1YL_V1H (0x7ff << 0) + +#define OSD_OSDWIN0XP_W0X (0x7ff << 0) + +#define OSD_OSDWIN0YP_W0Y (0x7ff << 0) + +#define OSD_OSDWIN0XL_W0W (0x7ff << 0) + +#define OSD_OSDWIN0YL_W0H (0x7ff << 0) + +#define OSD_OSDWIN1XP_W1X (0x7ff << 0) + +#define OSD_OSDWIN1YP_W1Y (0x7ff << 0) + +#define OSD_OSDWIN1XL_W1W (0x7ff << 0) + +#define OSD_OSDWIN1YL_W1H (0x7ff << 0) + +#define OSD_CURXP_RCSX (0x7ff << 0) + +#define OSD_CURYP_RCSY (0x7ff << 0) + +#define OSD_CURXL_RCSW (0x7ff << 0) + +#define OSD_CURYL_RCSH (0x7ff << 0) + +#define OSD_EXTMODE_EXPMDSEL (1 << 15) +#define OSD_EXTMODE_SCRNHEXP_SHIFT 13 +#define OSD_EXTMODE_SCRNHEXP (3 << 13) +#define OSD_EXTMODE_SCRNVEXP (1 << 12) +#define OSD_EXTMODE_OSD1BLDCHR (1 << 11) +#define OSD_EXTMODE_OSD0BLDCHR (1 << 10) +#define OSD_EXTMODE_ATNOSD1EN (1 << 9) +#define OSD_EXTMODE_ATNOSD0EN (1 << 8) +#define OSD_EXTMODE_OSDHRSZ15 (1 << 7) +#define OSD_EXTMODE_VIDHRSZ15 (1 << 6) +#define OSD_EXTMODE_ZMFILV1HEN (1 << 5) +#define OSD_EXTMODE_ZMFILV1VEN (1 << 4) +#define OSD_EXTMODE_ZMFILV0HEN (1 << 3) +#define OSD_EXTMODE_ZMFILV0VEN (1 << 2) +#define OSD_EXTMODE_EXPFILHEN (1 << 1) +#define OSD_EXTMODE_EXPFILVEN (1 << 0) + +#define OSD_MISCCTL_BLDSEL (1 << 15) +#define OSD_MISCCTL_S420D (1 << 14) +#define OSD_MISCCTL_BMAPT (1 << 13) +#define OSD_MISCCTL_DM365M (1 << 12) +#define OSD_MISCCTL_RGBEN (1 << 7) +#define OSD_MISCCTL_RGBWIN (1 << 6) +#define OSD_MISCCTL_DMANG (1 << 6) +#define OSD_MISCCTL_TMON (1 << 5) +#define OSD_MISCCTL_RSEL (1 << 4) +#define OSD_MISCCTL_CPBSY (1 << 3) +#define OSD_MISCCTL_PPSW (1 << 2) +#define OSD_MISCCTL_PPRV (1 << 1) + +#define OSD_CLUTRAMYCB_Y_SHIFT 8 +#define OSD_CLUTRAMYCB_Y (0xff << 8) +#define OSD_CLUTRAMYCB_CB_SHIFT 0 +#define OSD_CLUTRAMYCB_CB (0xff << 0) + +#define OSD_CLUTRAMCR_CR_SHIFT 8 +#define OSD_CLUTRAMCR_CR (0xff << 8) +#define OSD_CLUTRAMCR_CADDR_SHIFT 0 +#define OSD_CLUTRAMCR_CADDR (0xff << 0) + +#define OSD_TRANSPVAL_RGBTRANS (0xffff << 0) + +#define OSD_TRANSPVALL_RGBL (0xffff << 0) + +#define OSD_TRANSPVALU_Y_SHIFT 8 +#define OSD_TRANSPVALU_Y (0xff << 8) +#define OSD_TRANSPVALU_RGBU_SHIFT 0 +#define OSD_TRANSPVALU_RGBU (0xff << 0) + +#define OSD_TRANSPBMPIDX_BMP1_SHIFT 8 +#define OSD_TRANSPBMPIDX_BMP1 (0xff << 8) +#define OSD_TRANSPBMPIDX_BMP0_SHIFT 0 +#define OSD_TRANSPBMPIDX_BMP0 0xff + +#endif /* _DAVINCI_VPBE_H_ */ diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c new file mode 100644 index 0000000..03a3e5c --- /dev/null +++ b/drivers/media/video/davinci/vpbe_venc.c @@ -0,0 +1,566 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/videodev2.h> +#include <linux/slab.h> + +#include <mach/hardware.h> +#include <mach/mux.h> +#include <mach/io.h> +#include <mach/i2c.h> + +#include <linux/io.h> + +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpss.h> +#include <media/v4l2-device.h> + +#include "vpbe_venc_regs.h" + +#define MODULE_NAME VPBE_VENC_SUBDEV_NAME + +static int debug = 2; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-2"); + +struct venc_state { + struct v4l2_subdev sd; + struct venc_callback *callback; + struct venc_platform_data *pdata; + struct device *pdev; + u32 output; + v4l2_std_id std; + spinlock_t lock; + void __iomem *venc_base; + void __iomem *vdaccfg_reg; +}; + +static inline struct venc_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct venc_state, sd); +} + +static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset) +{ + struct venc_state *venc = to_state(sd); + + return readl(venc->venc_base + offset); +} + +static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, (venc->venc_base + offset)); + + return val; +} + +static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset, + u32 val, u32 mask) +{ + u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask); + + venc_write(sd, offset, new_val); + + return new_val; +} + +static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) +{ + struct venc_state *venc = to_state(sd); + + writel(val, venc->vdaccfg_reg); + + val = readl(venc->vdaccfg_reg); + + return val; +} + +/* This function sets the dac of the VPBE for various outputs + */ +static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) +{ + switch (out_index) { + case 0: + v4l2_dbg(debug, 1, sd, "Setting output to Composite\n"); + venc_write(sd, VENC_DACSEL, 0); + break; + case 1: + v4l2_dbg(debug, 1, sd, "Setting output to S-Video\n"); + venc_write(sd, VENC_DACSEL, 0x210); + break; + case 2: + venc_write(sd, VENC_DACSEL, 0x543); + break; + default: + return -EINVAL; + } + + return 0; +} + +static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) +{ + v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); + + if (benable) { + venc_write(sd, VENC_VMOD, 0); + venc_write(sd, VENC_CVBS, 0); + venc_write(sd, VENC_LCDOUT, 0); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_DACSEL, 0); + + } else { + venc_write(sd, VENC_VMOD, 0); + /* disable VCLK output pin enable */ + venc_write(sd, VENC_VIDCTL, 0x141); + + /* Disable output sync pins */ + venc_write(sd, VENC_SYNCCTL, 0); + + /* Disable DCLOCK */ + venc_write(sd, VENC_DCLKCTL, 0); + venc_write(sd, VENC_DRGBX1, 0x0000057C); + + /* Disable LCD output control (accepting default polarity) */ + venc_write(sd, VENC_LCDOUT, 0); + venc_write(sd, VENC_CMPNT, 0x100); + venc_write(sd, VENC_HSPLS, 0); + venc_write(sd, VENC_HINT, 0); + venc_write(sd, VENC_HSTART, 0); + venc_write(sd, VENC_HVALID, 0); + + venc_write(sd, VENC_VSPLS, 0); + venc_write(sd, VENC_VINT, 0); + venc_write(sd, VENC_VSTART, 0); + venc_write(sd, VENC_VVALID, 0); + + venc_write(sd, VENC_HSDLY, 0); + venc_write(sd, VENC_VSDLY, 0); + + venc_write(sd, VENC_YCCCTL, 0); + venc_write(sd, VENC_VSTARTA, 0); + + /* Set OSD clock and OSD Sync Adavance registers */ + venc_write(sd, VENC_OSDCLK0, 1); + venc_write(sd, VENC_OSDCLK1, 2); + } +} + +/* + * setting NTSC mode + */ +static int venc_set_ntsc(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * setting PAL mode + */ +static int venc_set_pal(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + + v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); + + /* Setup clock at VPSS & VENC for SD */ + vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); + if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ + venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); + /* Set REC656 Mode */ + venc_write(sd, VENC_YCCCTL, 0x1); + + venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, + VENC_SYNCCTL_OVD); + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, + (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); + venc_modify(sd, VENC_VMOD, + (1 << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_write(sd, VENC_DACTST, 0x0); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_480p59_94 + * + * This function configures the video encoder to EDTV(525p) component setting. + */ +static int venc_set_480p59_94(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); + + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +/* + * venc_set_625p + * + * This function configures the video encoder to HDTV(625p) component setting + */ +static int venc_set_576p50(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + struct venc_platform_data *pdata = venc->pdata; + + v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); + + /* Setup clock at VPSS & VENC for SD */ + if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0) + return -EINVAL; + + venc_enabledigitaloutput(sd, 0); + + venc_write(sd, VENC_OSDCLK0, 0); + venc_write(sd, VENC_OSDCLK1, 1); + + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, + VENC_VDPRO_DAFRQ); + venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, + VENC_VDPRO_DAUPS); + + venc_write(sd, VENC_VMOD, 0); + venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), + VENC_VMOD_VIE); + venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); + venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT), + VENC_VMOD_TVTYP); + + venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << + VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); + venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); + + return 0; +} + +static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) +{ + v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); + + if (norm & V4L2_STD_525_60) + return venc_set_ntsc(sd); + else if (norm & V4L2_STD_625_50) + return venc_set_pal(sd); + + return -EINVAL; +} + +static int venc_s_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *dv_preset) +{ + v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n"); + + if (dv_preset->preset == V4L2_DV_576P50) + return venc_set_576p50(sd); + else if (dv_preset->preset == V4L2_DV_480P59_94) + return venc_set_480p59_94(sd); + + return -EINVAL; +} + +static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, + u32 config) +{ + struct venc_state *venc = to_state(sd); + int ret; + + v4l2_dbg(debug, 1, sd, "venc_s_routing\n"); + + ret = venc_set_dac(sd, output); + if (!ret) + venc->output = output; + + return ret; +} + +static long venc_ioctl(struct v4l2_subdev *sd, + unsigned int cmd, + void *arg) +{ + u32 val; + + switch (cmd) { + case VENC_GET_FLD: + val = venc_read(sd, VENC_VSTAT); + *((int *)arg) = ((val & VENC_VSTAT_FIDST) == + VENC_VSTAT_FIDST); + break; + default: + v4l2_err(sd, "Wrong IOCTL cmd\n"); + break; + } + + return 0; +} + +static const struct v4l2_subdev_core_ops venc_core_ops = { + .ioctl = venc_ioctl, +}; + +static const struct v4l2_subdev_video_ops venc_video_ops = { + .s_routing = venc_s_routing, + .s_std_output = venc_s_std_output, + .s_dv_preset = venc_s_dv_preset, +}; + +static const struct v4l2_subdev_ops venc_ops = { + .core = &venc_core_ops, + .video = &venc_video_ops, +}; + +static int venc_initialize(struct v4l2_subdev *sd) +{ + struct venc_state *venc = to_state(sd); + int ret; + + /* Set default to output to composite and std to NTSC */ + venc->output = 0; + venc->std = V4L2_STD_525_60; + + ret = venc_s_routing(sd, 0, venc->output, 0); + if (ret < 0) { + v4l2_err(sd, "Error setting output during init\n"); + return -EINVAL; + } + + ret = venc_s_std_output(sd, venc->std); + if (ret < 0) { + v4l2_err(sd, "Error setting std during init\n"); + return -EINVAL; + } + + return ret; +} + +static int venc_device_get(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + struct venc_state **venc = data; + + if (strcmp(MODULE_NAME, pdev->name) == 0) + *venc = platform_get_drvdata(pdev); + + return 0; +} + +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name) +{ + struct venc_state *venc; + int err; + + err = bus_for_each_dev(&platform_bus_type, NULL, &venc, + venc_device_get); + if (venc == NULL) + return NULL; + + v4l2_subdev_init(&venc->sd, &venc_ops); + + strcpy(venc->sd.name, venc_name); + if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) { + v4l2_err(v4l2_dev, + "vpbe unable to register venc sub device\n"); + return NULL; + } + if (venc_initialize(&venc->sd)) { + v4l2_err(v4l2_dev, + "vpbe venc initialization failed\n"); + return NULL; + } + + return &venc->sd; +} +EXPORT_SYMBOL(venc_sub_dev_init); + +static int venc_probe(struct platform_device *pdev) +{ + struct venc_state *venc; + struct resource *res; + int ret; + + venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL); + if (venc == NULL) + return -ENOMEM; + + venc->pdev = &pdev->dev; + venc->pdata = pdev->dev.platform_data; + if (NULL == venc->pdata) { + dev_err(venc->pdev, "Unable to get platform data for" + " VENC sub device"); + ret = -ENOENT; + goto free_mem; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(venc->pdev, + "Unable to get VENC register address map\n"); + ret = -ENODEV; + goto free_mem; + } + + if (!request_mem_region(res->start, resource_size(res), "venc")) { + dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n"); + ret = -ENODEV; + goto free_mem; + } + + venc->venc_base = ioremap_nocache(res->start, resource_size(res)); + if (!venc->venc_base) { + dev_err(venc->pdev, "Unable to map VENC IO space\n"); + ret = -ENODEV; + goto release_venc_mem_region; + } + + spin_lock_init(&venc->lock); + platform_set_drvdata(pdev, venc); + dev_notice(venc->pdev, "VENC sub device probe success\n"); + return 0; + +release_venc_mem_region: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); +free_mem: + kfree(venc); + return ret; +} + +static int venc_remove(struct platform_device *pdev) +{ + struct venc_state *venc = platform_get_drvdata(pdev); + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap((void *)venc->venc_base); + release_mem_region(res->start, resource_size(res)); + kfree(venc); + + return 0; +} + +static struct platform_driver venc_driver = { + .probe = venc_probe, + .remove = venc_remove, + .driver = { + .name = MODULE_NAME, + .owner = THIS_MODULE, + }, +}; + +static int venc_init(void) +{ + if (platform_driver_register(&venc_driver)) { + printk(KERN_ERR "Unable to register venc driver\n"); + return -ENODEV; + } + return 0; +} + +static void venc_exit(void) +{ + platform_driver_unregister(&venc_driver); + return; +} + +module_init(venc_init); +module_exit(venc_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VPBE VENC Driver"); +MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/video/davinci/vpbe_venc_regs.h new file mode 100644 index 0000000..947cb15 --- /dev/null +++ b/drivers/media/video/davinci/vpbe_venc_regs.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2006-2010 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2.. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPBE_VENC_REGS_H +#define _VPBE_VENC_REGS_H + +/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */ +#define VENC_VMOD 0x00 +#define VENC_VIDCTL 0x04 +#define VENC_VDPRO 0x08 +#define VENC_SYNCCTL 0x0C +#define VENC_HSPLS 0x10 +#define VENC_VSPLS 0x14 +#define VENC_HINT 0x18 +#define VENC_HSTART 0x1C +#define VENC_HVALID 0x20 +#define VENC_VINT 0x24 +#define VENC_VSTART 0x28 +#define VENC_VVALID 0x2C +#define VENC_HSDLY 0x30 +#define VENC_VSDLY 0x34 +#define VENC_YCCCTL 0x38 +#define VENC_RGBCTL 0x3C +#define VENC_RGBCLP 0x40 +#define VENC_LINECTL 0x44 +#define VENC_CULLLINE 0x48 +#define VENC_LCDOUT 0x4C +#define VENC_BRTS 0x50 +#define VENC_BRTW 0x54 +#define VENC_ACCTL 0x58 +#define VENC_PWMP 0x5C +#define VENC_PWMW 0x60 +#define VENC_DCLKCTL 0x64 +#define VENC_DCLKPTN0 0x68 +#define VENC_DCLKPTN1 0x6C +#define VENC_DCLKPTN2 0x70 +#define VENC_DCLKPTN3 0x74 +#define VENC_DCLKPTN0A 0x78 +#define VENC_DCLKPTN1A 0x7C +#define VENC_DCLKPTN2A 0x80 +#define VENC_DCLKPTN3A 0x84 +#define VENC_DCLKHS 0x88 +#define VENC_DCLKHSA 0x8C +#define VENC_DCLKHR 0x90 +#define VENC_DCLKVS 0x94 +#define VENC_DCLKVR 0x98 +#define VENC_CAPCTL 0x9C +#define VENC_CAPDO 0xA0 +#define VENC_CAPDE 0xA4 +#define VENC_ATR0 0xA8 +#define VENC_ATR1 0xAC +#define VENC_ATR2 0xB0 +#define VENC_VSTAT 0xB8 +#define VENC_RAMADR 0xBC +#define VENC_RAMPORT 0xC0 +#define VENC_DACTST 0xC4 +#define VENC_YCOLVL 0xC8 +#define VENC_SCPROG 0xCC +#define VENC_CVBS 0xDC +#define VENC_CMPNT 0xE0 +#define VENC_ETMG0 0xE4 +#define VENC_ETMG1 0xE8 +#define VENC_ETMG2 0xEC +#define VENC_ETMG3 0xF0 +#define VENC_DACSEL 0xF4 +#define VENC_ARGBX0 0x100 +#define VENC_ARGBX1 0x104 +#define VENC_ARGBX2 0x108 +#define VENC_ARGBX3 0x10C +#define VENC_ARGBX4 0x110 +#define VENC_DRGBX0 0x114 +#define VENC_DRGBX1 0x118 +#define VENC_DRGBX2 0x11C +#define VENC_DRGBX3 0x120 +#define VENC_DRGBX4 0x124 +#define VENC_VSTARTA 0x128 +#define VENC_OSDCLK0 0x12C +#define VENC_OSDCLK1 0x130 +#define VENC_HVLDCL0 0x134 +#define VENC_HVLDCL1 0x138 +#define VENC_OSDHADV 0x13C +#define VENC_CLKCTL 0x140 +#define VENC_GAMCTL 0x144 +#define VENC_XHINTVL 0x174 + +/* bit definitions */ +#define VPBE_PCR_VENC_DIV (1 << 1) +#define VPBE_PCR_CLK_OFF (1 << 0) + +#define VENC_VMOD_VDMD_SHIFT 12 +#define VENC_VMOD_VDMD_YCBCR16 0 +#define VENC_VMOD_VDMD_YCBCR8 1 +#define VENC_VMOD_VDMD_RGB666 2 +#define VENC_VMOD_VDMD_RGB8 3 +#define VENC_VMOD_VDMD_EPSON 4 +#define VENC_VMOD_VDMD_CASIO 5 +#define VENC_VMOD_VDMD_UDISPQVGA 6 +#define VENC_VMOD_VDMD_STNLCD 7 +#define VENC_VMOD_VIE_SHIFT 1 +#define VENC_VMOD_VDMD (7 << 12) +#define VENC_VMOD_ITLCL (1 << 11) +#define VENC_VMOD_ITLC (1 << 10) +#define VENC_VMOD_NSIT (1 << 9) +#define VENC_VMOD_HDMD (1 << 8) +#define VENC_VMOD_TVTYP_SHIFT 6 +#define VENC_VMOD_TVTYP (3 << 6) +#define VENC_VMOD_SLAVE (1 << 5) +#define VENC_VMOD_VMD (1 << 4) +#define VENC_VMOD_BLNK (1 << 3) +#define VENC_VMOD_VIE (1 << 1) +#define VENC_VMOD_VENC (1 << 0) + +/* VMOD TVTYP options for HDMD=0 */ +#define SDTV_NTSC 0 +#define SDTV_PAL 1 +/* VMOD TVTYP options for HDMD=1 */ +#define HDTV_525P 0 +#define HDTV_625P 1 +#define HDTV_1080I 2 +#define HDTV_720P 3 + +#define VENC_VIDCTL_VCLKP (1 << 14) +#define VENC_VIDCTL_VCLKE_SHIFT 13 +#define VENC_VIDCTL_VCLKE (1 << 13) +#define VENC_VIDCTL_VCLKZ_SHIFT 12 +#define VENC_VIDCTL_VCLKZ (1 << 12) +#define VENC_VIDCTL_SYDIR_SHIFT 8 +#define VENC_VIDCTL_SYDIR (1 << 8) +#define VENC_VIDCTL_DOMD_SHIFT 4 +#define VENC_VIDCTL_DOMD (3 << 4) +#define VENC_VIDCTL_YCDIR_SHIFT 0 +#define VENC_VIDCTL_YCDIR (1 << 0) + +#define VENC_VDPRO_ATYCC_SHIFT 5 +#define VENC_VDPRO_ATYCC (1 << 5) +#define VENC_VDPRO_ATCOM_SHIFT 4 +#define VENC_VDPRO_ATCOM (1 << 4) +#define VENC_VDPRO_DAFRQ (1 << 3) +#define VENC_VDPRO_DAUPS (1 << 2) +#define VENC_VDPRO_CUPS (1 << 1) +#define VENC_VDPRO_YUPS (1 << 0) + +#define VENC_SYNCCTL_VPL_SHIFT 3 +#define VENC_SYNCCTL_VPL (1 << 3) +#define VENC_SYNCCTL_HPL_SHIFT 2 +#define VENC_SYNCCTL_HPL (1 << 2) +#define VENC_SYNCCTL_SYEV_SHIFT 1 +#define VENC_SYNCCTL_SYEV (1 << 1) +#define VENC_SYNCCTL_SYEH_SHIFT 0 +#define VENC_SYNCCTL_SYEH (1 << 0) +#define VENC_SYNCCTL_OVD_SHIFT 14 +#define VENC_SYNCCTL_OVD (1 << 14) + +#define VENC_DCLKCTL_DCKEC_SHIFT 11 +#define VENC_DCLKCTL_DCKEC (1 << 11) +#define VENC_DCLKCTL_DCKPW_SHIFT 0 +#define VENC_DCLKCTL_DCKPW (0x3f << 0) + +#define VENC_VSTAT_FIDST (1 << 4) + +#define VENC_CMPNT_MRGB_SHIFT 14 +#define VENC_CMPNT_MRGB (1 << 14) + +#endif /* _VPBE_VENC_REGS_H */ diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index d93ad74..49e4deb 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -33,7 +33,6 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/version.h> #include <linux/slab.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> @@ -44,6 +43,7 @@ MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_CAPTURE_VERSION); #define vpif_err(fmt, arg...) v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg) #define vpif_dbg(level, debug, fmt, arg...) \ @@ -1677,7 +1677,6 @@ static int vpif_querycap(struct file *file, void *priv, { struct vpif_capture_config *config = vpif_dev->platform_data; - cap->version = VPIF_CAPTURE_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; strlcpy(cap->driver, "vpif capture", sizeof(cap->driver)); strlcpy(cap->bus_info, "DM646x Platform", sizeof(cap->bus_info)); @@ -2211,10 +2210,8 @@ static __init int vpif_probe(struct platform_device *pdev) vfd->v4l2_dev = &vpif_obj.v4l2_dev; vfd->release = video_device_release; snprintf(vfd->name, sizeof(vfd->name), - "DM646x_VPIFCapture_DRIVER_V%d.%d.%d", - (VPIF_CAPTURE_VERSION_CODE >> 16) & 0xff, - (VPIF_CAPTURE_VERSION_CODE >> 8) & 0xff, - (VPIF_CAPTURE_VERSION_CODE) & 0xff); + "DM646x_VPIFCapture_DRIVER_V%s", + VPIF_CAPTURE_VERSION); /* Set video_dev to the video device */ ch->video_dev = vfd; } diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 7a4196d..064550f 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -23,7 +23,6 @@ /* Header files */ #include <linux/videodev2.h> -#include <linux/version.h> #include <media/v4l2-common.h> #include <media/v4l2-device.h> #include <media/videobuf-core.h> @@ -33,11 +32,7 @@ #include "vpif.h" /* Macros */ -#define VPIF_MAJOR_RELEASE 0 -#define VPIF_MINOR_RELEASE 0 -#define VPIF_BUILD 1 -#define VPIF_CAPTURE_VERSION_CODE ((VPIF_MAJOR_RELEASE << 16) | \ - (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD) +#define VPIF_CAPTURE_VERSION "0.0.2" #define VPIF_VALID_FIELD(field) (((V4L2_FIELD_ANY == field) || \ (V4L2_FIELD_NONE == field)) || \ diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index cdf659a..286f029 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -29,7 +29,6 @@ #include <linux/i2c.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/version.h> #include <linux/slab.h> #include <asm/irq.h> @@ -47,6 +46,7 @@ MODULE_DESCRIPTION("TI DaVinci VPIF Display driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(VPIF_DISPLAY_VERSION); #define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50) @@ -701,7 +701,6 @@ static int vpif_querycap(struct file *file, void *priv, { struct vpif_display_config *config = vpif_dev->platform_data; - cap->version = VPIF_DISPLAY_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; strlcpy(cap->driver, "vpif display", sizeof(cap->driver)); strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info)); @@ -1740,10 +1739,8 @@ static __init int vpif_probe(struct platform_device *pdev) vfd->v4l2_dev = &vpif_obj.v4l2_dev; vfd->release = video_device_release; snprintf(vfd->name, sizeof(vfd->name), - "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d", - (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff, - (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff, - (VPIF_DISPLAY_VERSION_CODE) & 0xff); + "DM646x_VPIFDisplay_DRIVER_V%s", + VPIF_DISPLAY_VERSION); /* Set video_dev to the video device */ ch->video_dev = vfd; diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index b53aaa8..5d1936d 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -18,7 +18,6 @@ /* Header files */ #include <linux/videodev2.h> -#include <linux/version.h> #include <media/v4l2-common.h> #include <media/v4l2-device.h> #include <media/videobuf-core.h> @@ -27,12 +26,7 @@ #include "vpif.h" /* Macros */ -#define VPIF_MAJOR_RELEASE (0) -#define VPIF_MINOR_RELEASE (0) -#define VPIF_BUILD (1) - -#define VPIF_DISPLAY_VERSION_CODE \ - ((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD) +#define VPIF_DISPLAY_VERSION "0.0.2" #define VPIF_VALID_FIELD(field) \ (((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \ diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 3cb78f2..281ee42 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -3,7 +3,6 @@ config VIDEO_EM28XX depends on VIDEO_DEV && I2C select VIDEO_TUNER select VIDEO_TVEEPROM - depends on RC_CORE select VIDEOBUF_VMALLOC select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO @@ -40,7 +39,18 @@ config VIDEO_EM28XX_DVB select DVB_S921 if !DVB_FE_CUSTOMISE select DVB_DRXD if !DVB_FE_CUSTOMISE select DVB_CXD2820R if !DVB_FE_CUSTOMISE + select DVB_DRXK if !DVB_FE_CUSTOMISE + select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE select VIDEOBUF_DVB ---help--- This adds support for DVB cards based on the Empiatech em28xx chips. + +config VIDEO_EM28XX_RC + bool "EM28XX Remote Controller support" + depends on RC_CORE + depends on VIDEO_EM28XX + depends on !(RC_CORE=m && VIDEO_EM28XX=y) + default y + ---help--- + Enables Remote Controller support on em28xx driver. diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile index d0f093d..38aaa00 100644 --- a/drivers/media/video/em28xx/Makefile +++ b/drivers/media/video/em28xx/Makefile @@ -1,5 +1,7 @@ -em28xx-objs := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \ - em28xx-input.o em28xx-vbi.o +em28xx-y := em28xx-video.o em28xx-i2c.o em28xx-cards.o +em28xx-y += em28xx-core.o em28xx-vbi.o + +em28xx-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-input.o em28xx-alsa-objs := em28xx-audio.o diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 3c48a72..cff0768 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -3,9 +3,9 @@ * * Copyright (C) 2006 Markus Rechberger <mrechberger@gmail.com> * - * Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@infradead.org> + * Copyright (C) 2007-2011 Mauro Carvalho Chehab <mchehab@redhat.com> * - Port to work with the in-kernel driver - * - Several cleanups + * - Cleanups, fixes, alsa-controls, etc. * * This driver is based on my previous au600 usb pstn audio driver * and inherits all the copyrights @@ -41,6 +41,7 @@ #include <sound/info.h> #include <sound/initval.h> #include <sound/control.h> +#include <sound/tlv.h> #include <media/v4l2-common.h> #include "em28xx.h" @@ -212,9 +213,12 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC); if (errCode) { + em28xx_errdev("submit of audio urb failed\n"); em28xx_deinit_isoc_audio(dev); + atomic_set(&dev->stream_started, 0); return errCode; } + } return 0; @@ -245,6 +249,7 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = { .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH | SNDRV_PCM_INFO_MMAP_VALID, .formats = SNDRV_PCM_FMTBIT_S16_LE, @@ -276,24 +281,27 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) return -ENODEV; } - /* Sets volume, mute, etc */ + runtime->hw = snd_em28xx_hw_capture; + if ((dev->alt == 0 || dev->audio_ifnum) && dev->adev.users == 0) { + if (dev->audio_ifnum) + dev->alt = 1; + else + dev->alt = 7; - dev->mute = 0; - mutex_lock(&dev->lock); - ret = em28xx_audio_analog_set(dev); - if (ret < 0) - goto err; + dprintk("changing alternate number on interface %d to %d\n", + dev->audio_ifnum, dev->alt); + usb_set_interface(dev->udev, dev->audio_ifnum, dev->alt); - runtime->hw = snd_em28xx_hw_capture; - if (dev->alt == 0 && dev->adev.users == 0) { - int errCode; - dev->alt = 7; - dprintk("changing alternate number to 7\n"); - errCode = usb_set_interface(dev->udev, 0, 7); - } + /* Sets volume, mute, etc */ + dev->mute = 0; + mutex_lock(&dev->lock); + ret = em28xx_audio_analog_set(dev); + if (ret < 0) + goto err; - dev->adev.users++; - mutex_unlock(&dev->lock); + dev->adev.users++; + mutex_unlock(&dev->lock); + } snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); dev->adev.capture_pcm_substream = substream; @@ -342,6 +350,8 @@ static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, ret = snd_pcm_alloc_vmalloc_buffer(substream, params_buffer_bytes(hw_params)); + if (ret < 0) + return ret; format = params_format(hw_params); rate = params_rate(hw_params); channels = params_channels(hw_params); @@ -393,20 +403,24 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, int cmd) { struct em28xx *dev = snd_pcm_substream_chip(substream); - int retval; + int retval = 0; switch (cmd) { + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */ + case SNDRV_PCM_TRIGGER_RESUME: /* fall through */ case SNDRV_PCM_TRIGGER_START: atomic_set(&dev->stream_started, 1); break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */ + case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */ case SNDRV_PCM_TRIGGER_STOP: - atomic_set(&dev->stream_started, 1); + atomic_set(&dev->stream_started, 0); break; default: retval = -EINVAL; } schedule_work(&dev->wq_trigger); - return 0; + return retval; } static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream @@ -432,6 +446,179 @@ static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, return vmalloc_to_page(pageptr); } +/* + * AC97 volume control support + */ +static int em28xx_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *info) +{ + info->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + info->count = 2; + info->value.integer.min = 0; + info->value.integer.max = 0x1f; + + return 0; +} + +static int em28xx_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + struct em28xx *dev = snd_kcontrol_chip(kcontrol); + u16 val = (0x1f - (value->value.integer.value[0] & 0x1f)) | + (0x1f - (value->value.integer.value[1] & 0x1f)) << 8; + int rc; + + mutex_lock(&dev->lock); + rc = em28xx_read_ac97(dev, kcontrol->private_value); + if (rc < 0) + goto err; + + val |= rc & 0x8000; /* Preserve the mute flag */ + + rc = em28xx_write_ac97(dev, kcontrol->private_value, val); + if (rc < 0) + goto err; + + dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n", + (val & 0x8000) ? "muted " : "", + 0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f), + val, (int)kcontrol->private_value); + +err: + mutex_unlock(&dev->lock); + return rc; +} + +static int em28xx_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + struct em28xx *dev = snd_kcontrol_chip(kcontrol); + int val; + + mutex_lock(&dev->lock); + val = em28xx_read_ac97(dev, kcontrol->private_value); + mutex_unlock(&dev->lock); + if (val < 0) + return val; + + dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n", + (val & 0x8000) ? "muted " : "", + 0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f), + val, (int)kcontrol->private_value); + + value->value.integer.value[0] = 0x1f - (val & 0x1f); + value->value.integer.value[1] = 0x1f - ((val << 8) & 0x1f); + + return 0; +} + +static int em28xx_vol_put_mute(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + struct em28xx *dev = snd_kcontrol_chip(kcontrol); + u16 val = value->value.integer.value[0]; + int rc; + + mutex_lock(&dev->lock); + rc = em28xx_read_ac97(dev, kcontrol->private_value); + if (rc < 0) + goto err; + + if (val) + rc &= 0x1f1f; + else + rc |= 0x8000; + + rc = em28xx_write_ac97(dev, kcontrol->private_value, rc); + if (rc < 0) + goto err; + + dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n", + (val & 0x8000) ? "muted " : "", + 0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f), + val, (int)kcontrol->private_value); + +err: + mutex_unlock(&dev->lock); + return rc; +} + +static int em28xx_vol_get_mute(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *value) +{ + struct em28xx *dev = snd_kcontrol_chip(kcontrol); + int val; + + mutex_lock(&dev->lock); + val = em28xx_read_ac97(dev, kcontrol->private_value); + mutex_unlock(&dev->lock); + if (val < 0) + return val; + + if (val & 0x8000) + value->value.integer.value[0] = 0; + else + value->value.integer.value[0] = 1; + + dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n", + (val & 0x8000) ? "muted " : "", + 0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f), + val, (int)kcontrol->private_value); + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(em28xx_db_scale, -3450, 150, 0); + +static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev, + char *name, int id) +{ + int err; + char ctl_name[44]; + struct snd_kcontrol *kctl; + struct snd_kcontrol_new tmp; + + memset (&tmp, 0, sizeof(tmp)); + tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER, + tmp.private_value = id, + tmp.name = ctl_name, + + /* Add Mute Control */ + sprintf(ctl_name, "%s Switch", name); + tmp.get = em28xx_vol_get_mute; + tmp.put = em28xx_vol_put_mute; + tmp.info = snd_ctl_boolean_mono_info; + kctl = snd_ctl_new1(&tmp, dev); + err = snd_ctl_add(card, kctl); + if (err < 0) + return err; + dprintk("Added control %s for ac97 volume control 0x%04x\n", + ctl_name, id); + + memset (&tmp, 0, sizeof(tmp)); + tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER, + tmp.private_value = id, + tmp.name = ctl_name, + + /* Add Volume Control */ + sprintf(ctl_name, "%s Volume", name); + tmp.get = em28xx_vol_get; + tmp.put = em28xx_vol_put; + tmp.info = em28xx_vol_info; + tmp.tlv.p = em28xx_db_scale, + kctl = snd_ctl_new1(&tmp, dev); + err = snd_ctl_add(card, kctl); + if (err < 0) + return err; + dprintk("Added control %s for ac97 volume control 0x%04x\n", + ctl_name, id); + + return 0; +} + +/* + * register/unregister code and data + */ static struct snd_pcm_ops snd_em28xx_pcm_capture = { .open = snd_em28xx_capture_open, .close = snd_em28xx_pcm_close, @@ -452,17 +639,17 @@ static int em28xx_audio_init(struct em28xx *dev) static int devnr; int err; - if (dev->has_alsa_audio != 1) { + if (!dev->has_alsa_audio || dev->audio_ifnum < 0) { /* This device does not support the extension (in this case the device is expecting the snd-usb-audio module or doesn't have analog audio support at all) */ return 0; } - printk(KERN_INFO "em28xx-audio.c: probing for em28x1 " - "non standard usbaudio\n"); + printk(KERN_INFO "em28xx-audio.c: probing for em28xx Audio Vendor Class\n"); printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " "Rechberger\n"); + printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab\n"); err = snd_card_create(index[devnr], "Em28xx Audio", THIS_MODULE, 0, &card); @@ -488,6 +675,22 @@ static int em28xx_audio_init(struct em28xx *dev) INIT_WORK(&dev->wq_trigger, audio_trigger); + if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + em28xx_cvol_new(card, dev, "Video", AC97_VIDEO_VOL); + em28xx_cvol_new(card, dev, "Line In", AC97_LINEIN_VOL); + em28xx_cvol_new(card, dev, "Phone", AC97_PHONE_VOL); + em28xx_cvol_new(card, dev, "Microphone", AC97_PHONE_VOL); + em28xx_cvol_new(card, dev, "CD", AC97_CD_VOL); + em28xx_cvol_new(card, dev, "AUX", AC97_AUX_VOL); + em28xx_cvol_new(card, dev, "PCM", AC97_PCM_OUT_VOL); + + em28xx_cvol_new(card, dev, "Master", AC97_MASTER_VOL); + em28xx_cvol_new(card, dev, "Line", AC97_LINE_LEVEL_VOL); + em28xx_cvol_new(card, dev, "Mono", AC97_MASTER_MONO_VOL); + em28xx_cvol_new(card, dev, "LFE", AC97_LFE_MASTER_VOL); + em28xx_cvol_new(card, dev, "Surround", AC97_SURR_MASTER_VOL); + } + err = snd_card_register(card); if (err < 0) { snd_card_free(card); @@ -538,7 +741,7 @@ static void __exit em28xx_alsa_unregister(void) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Markus Rechberger <mrechberger@gmail.com>"); -MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); MODULE_DESCRIPTION("Em28xx Audio driver"); module_init(em28xx_alsa_register); diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 4e37375..3e3959f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -289,7 +289,7 @@ static struct em28xx_reg_seq leadership_reset[] = { { -1, -1, -1, -1}, }; -/* 2013:024f PCTV Systems nanoStick T2 290e +/* 2013:024f PCTV nanoStick T2 290e * GPIO_6 - demod reset * GPIO_7 - LED */ @@ -300,6 +300,23 @@ static struct em28xx_reg_seq pctv_290e[] = { {-1, -1, -1, -1}, }; +#if 0 +static struct em28xx_reg_seq terratec_h5_gpio[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO, 0xf2, 0xff, 50}, + {EM2874_R80_GPIO, 0xf6, 0xff, 50}, + { -1, -1, -1, -1}, +}; + +static struct em28xx_reg_seq terratec_h5_digital[] = { + {EM2874_R80_GPIO, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + /* * Board definitions */ @@ -843,6 +860,19 @@ struct em28xx_board em28xx_boards[] = { .gpio = terratec_cinergy_USB_XS_FR_analog, } }, }, + [EM2884_BOARD_TERRATEC_H5] = { + .name = "Terratec Cinergy H5", + .has_dvb = 1, +#if 0 + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x41, + .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ + .tuner_gpio = terratec_h5_gpio, +#endif + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { .name = "Hauppauge WinTV HVR 900", .tda9887_conf = TDA9887_PRESENT, @@ -1259,7 +1289,7 @@ struct em28xx_board em28xx_boards[] = { } }, }, - [EM2874_LEADERSHIP_ISDBT] = { + [EM2874_BOARD_LEADERSHIP_ISDBT] = { .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, @@ -1319,7 +1349,6 @@ struct em28xx_board em28xx_boards[] = { }, [EM2880_BOARD_KWORLD_DVB_305U] = { .name = "KWorld DVB-T 305U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, @@ -1770,16 +1799,16 @@ struct em28xx_board em28xx_boards[] = { .dvb_gpio = kworld_a340_digital, .tuner_gpio = default_tuner_gpio, }, - /* 2013:024f PCTV Systems nanoStick T2 290e. + /* 2013:024f PCTV nanoStick T2 290e. * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ [EM28174_BOARD_PCTV_290E] = { + .name = "PCTV nanoStick T2 290e", .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, - .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, - .name = "PCTV Systems nanoStick T2 290e", .tuner_type = TUNER_ABSENT, .tuner_gpio = pctv_290e, .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1855,8 +1884,10 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), - .driver_info = EM2870_BOARD_TERRATEC_XS }, - { USB_DEVICE(0x0ccd, 0x0047), + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10a2), /* Rev. 1 */ + .driver_info = EM2884_BOARD_TERRATEC_H5 }, + { USB_DEVICE(0x0ccd, 0x10ad), /* Rev. 2 */ .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, { USB_DEVICE(0x0ccd, 0x0084), .driver_info = EM2860_BOARD_TERRATEC_AV350 }, @@ -1937,7 +1968,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, - {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT}, + {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, }; /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */ @@ -2660,10 +2691,9 @@ void em28xx_card_setup(struct em28xx *dev) .addr = 0xba >> 1, .platform_data = &pdata, }; - struct v4l2_subdev *sd; pdata.xtal = dev->sensor_xtal; - sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap, + v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap, &mt9v011_info, NULL); } @@ -2842,11 +2872,26 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; break; + case CHIP_ID_EM2884: + em28xx_info("chip ID is em2884\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; default: em28xx_info("em28xx chip ID = %d\n", dev->chip_id); } } + if (dev->is_audio_only) { + errCode = em28xx_audio_setup(dev); + if (errCode) + return -ENODEV; + em28xx_add_into_devlist(dev); + em28xx_init_extension(dev); + + return 0; + } + /* Prepopulate cached GPO register content */ retval = em28xx_read_reg(dev, dev->reg_gpo_num); if (retval >= 0) @@ -2947,6 +2992,9 @@ fail_reg_devices: return retval; } +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + /* * em28xx_usb_probe() * checks for supported devices @@ -2956,15 +3004,15 @@ static int em28xx_usb_probe(struct usb_interface *interface, { const struct usb_endpoint_descriptor *endpoint; struct usb_device *udev; - struct usb_interface *uif; struct em28xx *dev = NULL; int retval; - int i, nr, ifnum, isoc_pipe; + bool is_audio_only = false, has_audio = false; + int i, nr, isoc_pipe; + const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; char *speed; char descr[255] = ""; udev = usb_get_dev(interface_to_usbdev(interface)); - ifnum = interface->altsetting[0].desc.bInterfaceNumber; /* Check to see next free device and mark as used */ nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS); @@ -2984,6 +3032,19 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto err; } + /* Get endpoints */ + for (i = 0; i < interface->num_altsetting; i++) { + int ep; + + for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { + struct usb_host_endpoint *e; + e = &interface->altsetting[i].endpoint[ep]; + + if (e->desc.bEndpointAddress == 0x83) + has_audio = true; + } + } + endpoint = &interface->cur_altsetting->endpoint[0].desc; /* check if the device has the iso in endpoint at the correct place */ @@ -3003,19 +3064,22 @@ static int em28xx_usb_probe(struct usb_interface *interface, check_interface = 0; if (!check_interface) { - em28xx_err(DRIVER_NAME " video device (%04x:%04x): " - "interface %i, class %i found.\n", - le16_to_cpu(udev->descriptor.idVendor), - le16_to_cpu(udev->descriptor.idProduct), - ifnum, - interface->altsetting[0].desc.bInterfaceClass); - - em28xx_err(DRIVER_NAME " This is an anciliary " - "interface not used by the driver\n"); - - em28xx_devused &= ~(1<<nr); - retval = -ENODEV; - goto err; + if (has_audio) { + is_audio_only = true; + } else { + em28xx_err(DRIVER_NAME " video device (%04x:%04x): " + "interface %i, class %i found.\n", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + ifnum, + interface->altsetting[0].desc.bInterfaceClass); + em28xx_err(DRIVER_NAME " This is an anciliary " + "interface not used by the driver\n"); + + em28xx_devused &= ~(1<<nr); + retval = -ENODEV; + goto err; + } } } @@ -3045,8 +3109,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (*descr) strlcat(descr, " ", sizeof(descr)); - printk(DRIVER_NAME ": New device %s@ %s Mbps " - "(%04x:%04x, interface %d, class %d)\n", + printk(KERN_INFO DRIVER_NAME + ": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n", descr, speed, le16_to_cpu(udev->descriptor.idVendor), @@ -3054,6 +3118,11 @@ static int em28xx_usb_probe(struct usb_interface *interface, ifnum, interface->altsetting->desc.bInterfaceNumber); + if (has_audio) + printk(KERN_INFO DRIVER_NAME + ": Audio Vendor Class interface %i found\n", + ifnum); + /* * Make sure we have 480 Mbps of bandwidth, otherwise things like * video stream wouldn't likely work, since 12 Mbps is generally @@ -3089,10 +3158,13 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->devno = nr; dev->model = id->driver_info; dev->alt = -1; + dev->is_audio_only = is_audio_only; + dev->has_alsa_audio = has_audio; + dev->audio_ifnum = ifnum; /* Checks if audio is provided by some interface */ for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { - uif = udev->config->interface[i]; + struct usb_interface *uif = udev->config->interface[i]; if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { dev->has_audio_class = 1; break; @@ -3100,9 +3172,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, } /* compute alternate max packet sizes */ - uif = udev->actconfig->interface[0]; - - dev->num_alt = uif->num_altsetting; + dev->num_alt = interface->num_altsetting; dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL); if (dev->alt_max_pkt_size == NULL) { @@ -3114,14 +3184,21 @@ static int em28xx_usb_probe(struct usb_interface *interface, } for (i = 0; i < dev->num_alt ; i++) { - u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); - dev->alt_max_pkt_size[i] = - (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); + u16 tmp = le16_to_cpu(interface->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize); + unsigned int size = tmp & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(tmp); + + dev->alt_max_pkt_size[i] = size; } if ((card[nr] >= 0) && (card[nr] < em28xx_bcount)) dev->model = card[nr]; + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + /* allocate device struct */ mutex_init(&dev->lock); mutex_lock(&dev->lock); @@ -3133,9 +3210,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto err; } - /* save our data pointer in this interface device */ - usb_set_intfdata(interface, dev); - request_modules(dev); /* Should be the last thing to do, to avoid newer udev's to @@ -3164,6 +3238,13 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) if (!dev) return; + if (dev->is_audio_only) { + mutex_lock(&dev->lock); + em28xx_close_extension(dev); + mutex_unlock(&dev->lock); + return; + } + em28xx_info("disconnecting %s\n", dev->vdev->name); flush_request_modules(dev); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index e33f145..57b1b5c 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -211,6 +211,7 @@ int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val) { return em28xx_write_regs(dev, reg, &val, 1); } +EXPORT_SYMBOL_GPL(em28xx_write_reg); /* * em28xx_write_reg_bits() @@ -286,6 +287,7 @@ int em28xx_read_ac97(struct em28xx *dev, u8 reg) return ret; return le16_to_cpu(val); } +EXPORT_SYMBOL_GPL(em28xx_read_ac97); /* * em28xx_write_ac97() @@ -313,13 +315,14 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val) return 0; } +EXPORT_SYMBOL_GPL(em28xx_write_ac97); -struct em28xx_vol_table { +struct em28xx_vol_itable { enum em28xx_amux mux; u8 reg; }; -static struct em28xx_vol_table inputs[] = { +static struct em28xx_vol_itable inputs[] = { { EM28XX_AMUX_VIDEO, AC97_VIDEO_VOL }, { EM28XX_AMUX_LINE_IN, AC97_LINEIN_VOL }, { EM28XX_AMUX_PHONE, AC97_PHONE_VOL }, @@ -403,7 +406,12 @@ static int em28xx_set_audio_source(struct em28xx *dev) return ret; } -static const struct em28xx_vol_table outputs[] = { +struct em28xx_vol_otable { + enum em28xx_aout mux; + u8 reg; +}; + +static const struct em28xx_vol_otable outputs[] = { { EM28XX_AOUT_MASTER, AC97_MASTER_VOL }, { EM28XX_AOUT_LINE, AC97_LINE_LEVEL_VOL }, { EM28XX_AOUT_MONO, AC97_MASTER_MONO_VOL }, @@ -492,17 +500,13 @@ int em28xx_audio_setup(struct em28xx *dev) if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) { /* Digital only device - don't load any alsa module */ - dev->audio_mode.has_audio = 0; - dev->has_audio_class = 0; - dev->has_alsa_audio = 0; + dev->audio_mode.has_audio = false; + dev->has_audio_class = false; + dev->has_alsa_audio = false; return 0; } - /* If device doesn't support Usb Audio Class, use vendor class */ - if (!dev->has_audio_class) - dev->has_alsa_audio = 1; - - dev->audio_mode.has_audio = 1; + dev->audio_mode.has_audio = true; /* See how this device is configured */ cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG); @@ -512,8 +516,8 @@ int em28xx_audio_setup(struct em28xx *dev) cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */ } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) { /* The device doesn't have vendor audio at all */ - dev->has_alsa_audio = 0; - dev->audio_mode.has_audio = 0; + dev->has_alsa_audio = false; + dev->audio_mode.has_audio = false; return 0; } else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == EM28XX_CHIPCFG_I2S_3_SAMPRATES) { @@ -542,8 +546,8 @@ int em28xx_audio_setup(struct em28xx *dev) */ em28xx_warn("AC97 chip type couldn't be determined\n"); dev->audio_mode.ac97 = EM28XX_NO_AC97; - dev->has_alsa_audio = 0; - dev->audio_mode.has_audio = 0; + dev->has_alsa_audio = false; + dev->audio_mode.has_audio = false; goto init_audio; } @@ -615,7 +619,9 @@ int em28xx_capture_start(struct em28xx *dev, int start) { int rc; - if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) { + if (dev->chip_id == CHIP_ID_EM2874 || + dev->chip_id == CHIP_ID_EM2884 || + dev->chip_id == CHIP_ID_EM28174) { /* The Transport Stream Enable Register moved in em2874 */ if (!start) { rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE, @@ -884,6 +890,7 @@ int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio) } return rc; } +EXPORT_SYMBOL_GPL(em28xx_gpio_set); int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode) { @@ -917,7 +924,7 @@ EXPORT_SYMBOL_GPL(em28xx_set_mode); static void em28xx_irq_callback(struct urb *urb) { struct em28xx *dev = urb->context; - int rc, i; + int i; switch (urb->status) { case 0: /* success */ @@ -934,7 +941,7 @@ static void em28xx_irq_callback(struct urb *urb) /* Copy data from URB */ spin_lock(&dev->slock); - rc = dev->isoc_ctl.isoc_copy(dev, urb); + dev->isoc_ctl.isoc_copy(dev, urb); spin_unlock(&dev->slock); /* Reset urb buffers */ @@ -1106,17 +1113,19 @@ EXPORT_SYMBOL_GPL(em28xx_init_isoc); int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev) { unsigned int chip_cfg2; - unsigned int packet_size = 564; - - if (dev->chip_id == CHIP_ID_EM2874) { - /* FIXME - for now assume 564 like it was before, but the - em2874 code should be added to return the proper value... */ - packet_size = 564; - } else if (dev->chip_id == CHIP_ID_EM28174) { - /* FIXME same as em2874. 564 was enough for 22 Mbit DVB-T - but too much for 44 Mbit DVB-C. */ - packet_size = 752; - } else { + unsigned int packet_size; + + switch (dev->chip_id) { + case CHIP_ID_EM2710: + case CHIP_ID_EM2750: + case CHIP_ID_EM2800: + case CHIP_ID_EM2820: + case CHIP_ID_EM2840: + case CHIP_ID_EM2860: + /* No DVB support */ + return -EINVAL; + case CHIP_ID_EM2870: + case CHIP_ID_EM2883: /* TS max packet size stored in bits 1-0 of R01 */ chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2); switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) { @@ -1133,9 +1142,24 @@ int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev) packet_size = 752; break; } + break; + case CHIP_ID_EM2874: + /* + * FIXME: for now assumes 564 like it was before, but the + * em2874 code should be added to return the proper value + */ + packet_size = 564; + break; + case CHIP_ID_EM2884: + case CHIP_ID_EM28174: + default: + /* + * FIXME: same as em2874. 564 was enough for 22 Mbit DVB-T + * but not enough for 44 Mbit DVB-C. + */ + packet_size = 752; } - em28xx_coredbg("dvb max packet size=%d\n", packet_size); return packet_size; } EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 7904ca4..e5916de 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -1,7 +1,7 @@ /* DVB device driver for em28xx - (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org> + (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org> (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com> - Fixes for the driver to properly work with HVR-950 @@ -40,6 +40,8 @@ #include "s921.h" #include "drxd.h" #include "cxd2820r.h" +#include "tda18271c2dd.h" +#include "drxk.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); @@ -73,6 +75,11 @@ struct em28xx_dvb { struct dmx_frontend fe_hw; struct dmx_frontend fe_mem; struct dvb_net net; + + /* Due to DRX-K - probably need changes */ + int (*gate_ctrl)(struct dvb_frontend *, int); + struct semaphore pll_mutex; + bool dont_attach_fe1; }; @@ -160,6 +167,11 @@ static int start_streaming(struct em28xx_dvb *dvb) return rc; max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev); + if (max_dvb_packet_size < 0) + return max_dvb_packet_size; + dprintk(1, "Using %d buffers each with %d bytes\n", + EM28XX_DVB_NUM_BUFS, + max_dvb_packet_size); return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS, EM28XX_DVB_NUM_BUFS, max_dvb_packet_size, @@ -295,6 +307,79 @@ static struct drxd_config em28xx_drxd = { .disable_i2c_gate_ctrl = 1, }; +struct drxk_config terratec_h5_drxk = { + .adr = 0x29, + .single_master = 1, + .no_i2c_bridge = 1, + .microcode_name = "dvb-usb-terratec-h5-drxk.fw", +}; + +static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct em28xx_dvb *dvb = fe->sec_priv; + int status; + + if (!dvb) + return -EINVAL; + + if (enable) { + down(&dvb->pll_mutex); + status = dvb->gate_ctrl(fe, 1); + } else { + status = dvb->gate_ctrl(fe, 0); + up(&dvb->pll_mutex); + } + return status; +} + +static void terratec_h5_init(struct em28xx *dev) +{ + int i; + struct em28xx_reg_seq terratec_h5_init[] = { + {EM28XX_R08_GPIO, 0xff, 0xff, 10}, + {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + {EM2874_R80_GPIO, 0xf2, 0xff, 50}, + {EM2874_R80_GPIO, 0xf6, 0xff, 100}, + { -1, -1, -1, -1}, + }; + struct em28xx_reg_seq terratec_h5_end[] = { + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO, 0xa6, 0xff, 50}, + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + { -1, -1, -1, -1}, + }; + struct { + unsigned char r[4]; + int len; + } regs[] = { + {{ 0x06, 0x02, 0x00, 0x31 }, 4}, + {{ 0x01, 0x02 }, 2}, + {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0xff, 0xaf }, 4}, + {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0x73, 0xaf }, 4}, + {{ 0x04, 0x00 }, 2}, + {{ 0x00, 0x04 }, 2}, + {{ 0x00, 0x04, 0x00, 0x0a }, 4}, + {{ 0x04, 0x14 }, 2}, + {{ 0x04, 0x14, 0x00, 0x00 }, 4}, + }; + + em28xx_gpio_set(dev, terratec_h5_init); + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); + msleep(10); + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45); + msleep(10); + + dev->i2c_client.addr = 0x82 >> 1; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); + em28xx_gpio_set(dev, terratec_h5_end); +}; + static int mt352_terratec_xs_init(struct dvb_frontend *fe) { /* Values extracted from a USB trace of the Terratec Windows driver */ @@ -516,7 +601,7 @@ static void unregister_dvb(struct em28xx_dvb *dvb) if (dvb->fe[1]) dvb_unregister_frontend(dvb->fe[1]); dvb_unregister_frontend(dvb->fe[0]); - if (dvb->fe[1]) + if (dvb->fe[1] && !dvb->dont_attach_fe1) dvb_frontend_detach(dvb->fe[1]); dvb_frontend_detach(dvb->fe[0]); dvb_unregister_adapter(&dvb->adapter); @@ -546,7 +631,7 @@ static int dvb_init(struct em28xx *dev) em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); /* init frontend */ switch (dev->model) { - case EM2874_LEADERSHIP_ISDBT: + case EM2874_BOARD_LEADERSHIP_ISDBT: dvb->fe[0] = dvb_attach(s921_attach, &sharp_isdbt, &dev->i2c_adap); @@ -689,6 +774,41 @@ static int dvb_init(struct em28xx *dev) } } break; + case EM2884_BOARD_TERRATEC_H5: + terratec_h5_init(dev); + + dvb->dont_attach_fe1 = 1; + + dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap, &dvb->fe[1]); + if (!dvb->fe[0]) { + result = -EINVAL; + goto out_free; + } + + /* FIXME: do we need a pll semaphore? */ + dvb->fe[0]->sec_priv = dvb; + sema_init(&dvb->pll_mutex, 1); + dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl; + dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; + dvb->fe[1]->id = 1; + + /* Attach tda18271 to DVB-C frontend */ + if (dvb->fe[0]->ops.i2c_gate_ctrl) + dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1); + if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) { + result = -EINVAL; + goto out_free; + } + if (dvb->fe[0]->ops.i2c_gate_ctrl) + dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0); + + /* Hack - needed by drxk/tda18271c2dd */ + dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv; + memcpy(&dvb->fe[1]->ops.tuner_ops, + &dvb->fe[0]->ops.tuner_ops, + sizeof(dvb->fe[0]->ops.tuner_ops)); + + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 4739fc7..36f5a9b 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -181,16 +181,25 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr, /* * em28xx_i2c_send_bytes() - * untested for more than 4 bytes */ static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf, short len, int stop) { int wrcount = 0; struct em28xx *dev = (struct em28xx *)data; + int write_timeout, ret; wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); + /* Seems to be required after a write */ + for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; + write_timeout -= 5) { + ret = dev->em28xx_read_reg(dev, 0x05); + if (!ret) + break; + msleep(5); + } + return wrcount; } @@ -218,9 +227,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr, */ static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr) { - char msg; int ret; - msg = addr; ret = dev->em28xx_read_reg_req(dev, 2, addr); if (ret < 0) { @@ -332,7 +339,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) struct em28xx_eeprom *em_eeprom = (void *)eedata; int i, err, size = len, block; - if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) { + if (dev->chip_id == CHIP_ID_EM2874 || + dev->chip_id == CHIP_ID_EM28174 || + dev->chip_id == CHIP_ID_EM2884) { /* Empia switched to a 16-bit addressable eeprom in newer devices. While we could certainly write a routine to read the eeprom, there is nothing of use in there that cannot be diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index ba1ba86..5d12b14 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -372,6 +372,7 @@ int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type) ir->get_key = default_polling_getkey; break; case CHIP_ID_EM2874: + case CHIP_ID_EM28174: ir->get_key = em2874_polling_getkey; em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); break; diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index e92a28e..66f7923 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -201,6 +201,7 @@ enum em28xx_chip_id { CHIP_ID_EM2870 = 35, CHIP_ID_EM2883 = 36, CHIP_ID_EM2874 = 65, + CHIP_ID_EM2884 = 68, CHIP_ID_EM28174 = 113, }; diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 7b6461d..d176dc0 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -32,7 +32,6 @@ #include <linux/bitmap.h> #include <linux/usb.h> #include <linux/i2c.h> -#include <linux/version.h> #include <linux/mm.h> #include <linux/mutex.h> #include <linux/slab.h> @@ -50,7 +49,8 @@ "Sascha Sommer <saschasommer@freenet.de>" #define DRIVER_DESC "Empia em28xx based USB video device driver" -#define EM28XX_VERSION_CODE KERNEL_VERSION(0, 1, 2) + +#define EM28XX_VERSION "0.1.3" #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \ @@ -72,6 +72,7 @@ do {\ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(EM28XX_VERSION); static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; @@ -1757,8 +1758,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card)); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = EM28XX_VERSION_CODE; - cap->capabilities = V4L2_CAP_SLICED_VBI_CAPTURE | V4L2_CAP_VIDEO_CAPTURE | @@ -1976,7 +1975,6 @@ static int radio_querycap(struct file *file, void *priv, strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card)); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = EM28XX_VERSION_CODE; cap->capabilities = V4L2_CAP_TUNER; return 0; } @@ -2450,10 +2448,8 @@ int em28xx_register_analog_devices(struct em28xx *dev) u8 val; int ret; - printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n", - dev->name, - (EM28XX_VERSION_CODE >> 16) & 0xff, - (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); + printk(KERN_INFO "%s: v4l2 driver version %s\n", + dev->name, EM28XX_VERSION); /* set default norm */ dev->norm = em28xx_video_template.current_norm; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 3cca331..d80658b 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -117,9 +117,9 @@ #define EM2800_BOARD_VC211A 74 #define EM2882_BOARD_DIKOM_DK300 75 #define EM2870_BOARD_KWORLD_A340 76 -#define EM2874_LEADERSHIP_ISDBT 77 +#define EM2874_BOARD_LEADERSHIP_ISDBT 77 #define EM28174_BOARD_PCTV_290E 78 - +#define EM2884_BOARD_TERRATEC_H5 79 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 @@ -487,6 +487,8 @@ struct em28xx { int devno; /* marks the number of this device */ enum em28xx_chip_id chip_id; + int audio_ifnum; + struct v4l2_device v4l2_dev; struct em28xx_board board; @@ -503,6 +505,7 @@ struct em28xx { unsigned int has_audio_class:1; unsigned int has_alsa_audio:1; + unsigned int is_audio_only:1; /* Controls audio streaming */ struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */ @@ -697,6 +700,9 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg); void em28xx_release_resources(struct em28xx *dev); /* Provided by em28xx-input.c */ + +#ifdef CONFIG_VIDEO_EM28XX_RC + int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, @@ -709,6 +715,20 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev); int em28xx_ir_init(struct em28xx *dev); int em28xx_ir_fini(struct em28xx *dev); +#else + +#define em28xx_get_key_terratec NULL +#define em28xx_get_key_em_haup NULL +#define em28xx_get_key_pinnacle_usb_grey NULL +#define em28xx_get_key_winfast_usbii_deluxe NULL + +static inline void em28xx_register_snapshot_button(struct em28xx *dev) {} +static inline void em28xx_deregister_snapshot_button(struct em28xx *dev) {} +static inline int em28xx_ir_init(struct em28xx *dev) { return 0; } +static inline int em28xx_ir_fini(struct em28xx *dev) { return 0; } + +#endif + /* Provided by em28xx-vbi.c */ extern struct videobuf_queue_ops em28xx_vbi_qops; diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h index bf66189..14bb907 100644 --- a/drivers/media/video/et61x251/et61x251.h +++ b/drivers/media/video/et61x251/et61x251.h @@ -21,7 +21,6 @@ #ifndef _ET61X251_H_ #define _ET61X251_H_ -#include <linux/version.h> #include <linux/usb.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index a982750..9a1e80a 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -18,6 +18,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ***************************************************************************/ +#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> @@ -48,8 +49,7 @@ #define ET61X251_MODULE_AUTHOR "(C) 2006-2007 Luca Risolia" #define ET61X251_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" #define ET61X251_MODULE_LICENSE "GPL" -#define ET61X251_MODULE_VERSION "1:1.09" -#define ET61X251_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 9) +#define ET61X251_MODULE_VERSION "1.1.10" /*****************************************************************************/ @@ -1579,7 +1579,7 @@ et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg) { struct v4l2_capability cap = { .driver = "et61x251", - .version = ET61X251_MODULE_VERSION_CODE, + .version = LINUX_VERSION_CODE, .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING, }; @@ -2480,16 +2480,8 @@ static long et61x251_ioctl_v4l2(struct file *filp, case VIDIOC_S_PARM: return et61x251_vidioc_s_parm(cam, arg); - case VIDIOC_G_STD: - case VIDIOC_S_STD: - case VIDIOC_QUERYSTD: - case VIDIOC_ENUMSTD: - case VIDIOC_QUERYMENU: - case VIDIOC_ENUM_FRAMEINTERVALS: - return -EINVAL; - default: - return -EINVAL; + return -ENOTTY; } } diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c index 908d701..27cb197 100644 --- a/drivers/media/video/fsl-viu.c +++ b/drivers/media/video/fsl-viu.c @@ -23,19 +23,13 @@ #include <linux/io.h> #include <linux/of_platform.h> #include <linux/slab.h> -#include <linux/version.h> #include <media/v4l2-common.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/videobuf-dma-contig.h> #define DRV_NAME "fsl_viu" -#define VIU_MAJOR_VERSION 0 -#define VIU_MINOR_VERSION 5 -#define VIU_RELEASE 0 -#define VIU_VERSION KERNEL_VERSION(VIU_MAJOR_VERSION, \ - VIU_MINOR_VERSION, \ - VIU_RELEASE) +#define VIU_VERSION "0.5.1" #define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ @@ -610,7 +604,6 @@ static int vidioc_querycap(struct file *file, void *priv, { strcpy(cap->driver, "viu"); strcpy(cap->card, "viu"); - cap->version = VIU_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_OVERLAY | @@ -1684,3 +1677,4 @@ module_exit(viu_exit); MODULE_DESCRIPTION("Freescale Video-In(VIU)"); MODULE_AUTHOR("Hongjun Chen"); MODULE_LICENSE("GPL"); +MODULE_VERSION(VIU_VERSION); diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 34ae2c2..43d9a20 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -179,6 +179,16 @@ config USB_GSPCA_PAC7311 To compile this driver as a module, choose M here: the module will be called gspca_pac7311. +config USB_GSPCA_SE401 + tristate "SE401 USB Camera Driver" + depends on VIDEO_V4L2 && USB_GSPCA + help + Say Y here if you want support for cameras based on the + Endpoints (formerly known as AOX) se401 chip. + + To compile this driver as a module, choose M here: the + module will be called gspca_se401. + config USB_GSPCA_SN9C2028 tristate "SONIX Dual-Mode USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile index 802fbe1..d6364a8 100644 --- a/drivers/media/video/gspca/Makefile +++ b/drivers/media/video/gspca/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_OV534_9) += gspca_ov534_9.o obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o obj-$(CONFIG_USB_GSPCA_PAC7302) += gspca_pac7302.o obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o +obj-$(CONFIG_USB_GSPCA_SE401) += gspca_se401.o obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o @@ -58,6 +59,7 @@ gspca_ov534_9-objs := ov534_9.o gspca_pac207-objs := pac207.o gspca_pac7302-objs := pac7302.o gspca_pac7311-objs := pac7311.o +gspca_se401-objs := se401.o gspca_sn9c2028-objs := sn9c2028.o gspca_sn9c20x-objs := sn9c20x.o gspca_sonixb-objs := sonixb.o diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h index 49ad4ac..0330a02 100644 --- a/drivers/media/video/gspca/gl860/gl860.h +++ b/drivers/media/video/gspca/gl860/gl860.h @@ -18,7 +18,6 @@ */ #ifndef GL860_DEV_H #define GL860_DEV_H -#include <linux/version.h> #include "gspca.h" diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 08ce994..5da4879 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -24,7 +24,6 @@ #define MODULE_NAME "gspca" #include <linux/init.h> -#include <linux/version.h> #include <linux/fs.h> #include <linux/vmalloc.h> #include <linux/sched.h> @@ -51,11 +50,12 @@ #error "DEF_NURBS too big" #endif +#define DRIVER_VERSION_NUMBER "2.13.0" + MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>"); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); - -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 13, 0) +MODULE_VERSION(DRIVER_VERSION_NUMBER); #ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; @@ -443,8 +443,11 @@ void gspca_frame_add(struct gspca_dev *gspca_dev, } else { switch (gspca_dev->last_packet_type) { case DISCARD_PACKET: - if (packet_type == LAST_PACKET) + if (packet_type == LAST_PACKET) { gspca_dev->last_packet_type = packet_type; + gspca_dev->image = NULL; + gspca_dev->image_len = 0; + } return; case LAST_PACKET: return; @@ -1278,10 +1281,10 @@ static int vidioc_querycap(struct file *file, void *priv, ret = -ENODEV; goto out; } - strncpy((char *) cap->driver, gspca_dev->sd_desc->name, + strlcpy((char *) cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver); if (gspca_dev->dev->product != NULL) { - strncpy((char *) cap->card, gspca_dev->dev->product, + strlcpy((char *) cap->card, gspca_dev->dev->product, sizeof cap->card); } else { snprintf((char *) cap->card, sizeof cap->card, @@ -1291,7 +1294,6 @@ static int vidioc_querycap(struct file *file, void *priv, } usb_make_path(gspca_dev->dev, (char *) cap->bus_info, sizeof(cap->bus_info)); - cap->version = DRIVER_VERSION_NUMBER; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; @@ -1460,7 +1462,7 @@ static int vidioc_enum_input(struct file *file, void *priv, return -EINVAL; input->type = V4L2_INPUT_TYPE_CAMERA; input->status = gspca_dev->cam.input_flags; - strncpy(input->name, gspca_dev->sd_desc->name, + strlcpy(input->name, gspca_dev->sd_desc->name, sizeof input->name); return 0; } @@ -2478,10 +2480,7 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure); /* -- module insert / remove -- */ static int __init gspca_init(void) { - info("v%d.%d.%d registered", - (DRIVER_VERSION_NUMBER >> 16) & 0xff, - (DRIVER_VERSION_NUMBER >> 8) & 0xff, - DRIVER_VERSION_NUMBER & 0xff); + info("v" DRIVER_VERSION_NUMBER " registered"); return 0; } static void __exit gspca_exit(void) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 057e287..0800433 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -134,6 +134,7 @@ enum sensors { SEN_OV7670, SEN_OV76BE, SEN_OV8610, + SEN_OV9600, }; /* Note this is a bit of a hack, but the w9968cf driver needs the code for all @@ -340,6 +341,10 @@ static const unsigned ctrl_dis[] = { (1 << EXPOSURE) | (1 << AUTOGAIN) | (1 << FREQ), +[SEN_OV9600] = ((1 << NCTRL) - 1) /* no control */ + ^ ((1 << EXPOSURE) /* but exposure */ + | (1 << AUTOGAIN)), /* and autogain */ + }; static const struct v4l2_pix_format ov519_vga_mode[] = { @@ -525,6 +530,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; +static const struct v4l2_pix_format ovfx2_ov9600_mode[] = { + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1280, + .sizeimage = 1280 * 1024, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; /* Registers common to OV511 / OV518 */ #define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ @@ -1807,6 +1823,22 @@ static const struct ov_i2c_regvals norm_7660[] = { | OV7670_COM8_AEC}, {0xa1, 0xc8} }; +static const struct ov_i2c_regvals norm_9600[] = { + {0x12, 0x80}, + {0x0c, 0x28}, + {0x11, 0x80}, + {0x13, 0xb5}, + {0x14, 0x3e}, + {0x1b, 0x04}, + {0x24, 0xb0}, + {0x25, 0x90}, + {0x26, 0x94}, + {0x35, 0x90}, + {0x37, 0x07}, + {0x38, 0x08}, + {0x01, 0x8e}, + {0x02, 0x85} +}; /* 7670. Defaults taken from OmniVision provided data, * as provided by Jonathan Corbet of OLPC */ @@ -2400,9 +2432,12 @@ static int ov518_i2c_r(struct sd *sd, u8 reg) /* Initiate 2-byte write cycle */ reg_w(sd, R518_I2C_CTL, 0x03); + reg_r8(sd, R518_I2C_CTL); /* Initiate 2-byte read cycle */ reg_w(sd, R518_I2C_CTL, 0x05); + reg_r8(sd, R518_I2C_CTL); + value = reg_r(sd, R51x_I2C_DATA); PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value); return value; @@ -2686,7 +2721,7 @@ static void write_i2c_regvals(struct sd *sd, * ***************************************************************************/ -/* This initializes the OV2x10 / OV3610 / OV3620 */ +/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */ static void ov_hires_configure(struct sd *sd) { int high, low; @@ -2702,19 +2737,32 @@ static void ov_hires_configure(struct sd *sd) high = i2c_r(sd, 0x0a); low = i2c_r(sd, 0x0b); /* info("%x, %x", high, low); */ - if (high == 0x96 && low == 0x40) { - PDEBUG(D_PROBE, "Sensor is an OV2610"); - sd->sensor = SEN_OV2610; - } else if (high == 0x96 && low == 0x41) { - PDEBUG(D_PROBE, "Sensor is an OV2610AE"); - sd->sensor = SEN_OV2610AE; - } else if (high == 0x36 && (low & 0x0f) == 0x00) { - PDEBUG(D_PROBE, "Sensor is an OV3610"); - sd->sensor = SEN_OV3610; - } else { - err("Error unknown sensor type: %02x%02x", - high, low); + switch (high) { + case 0x96: + switch (low) { + case 0x40: + PDEBUG(D_PROBE, "Sensor is a OV2610"); + sd->sensor = SEN_OV2610; + return; + case 0x41: + PDEBUG(D_PROBE, "Sensor is a OV2610AE"); + sd->sensor = SEN_OV2610AE; + return; + case 0xb1: + PDEBUG(D_PROBE, "Sensor is a OV9600"); + sd->sensor = SEN_OV9600; + return; + } + break; + case 0x36: + if ((low & 0x0f) == 0x00) { + PDEBUG(D_PROBE, "Sensor is a OV3610"); + sd->sensor = SEN_OV3610; + return; + } + break; } + err("Error unknown sensor type: %02x%02x", high, low); } /* This initializes the OV8110, OV8610 sensor. The OV8110 uses @@ -3400,6 +3448,10 @@ static int sd_init(struct gspca_dev *gspca_dev) cam->cam_mode = ovfx2_ov3610_mode; cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode); break; + case SEN_OV9600: + cam->cam_mode = ovfx2_ov9600_mode; + cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode); + break; default: if (sd->sif) { cam->cam_mode = ov519_sif_mode; @@ -3497,6 +3549,12 @@ static int sd_init(struct gspca_dev *gspca_dev) case SEN_OV8610: write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)); break; + case SEN_OV9600: + write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600)); + + /* enable autoexpo */ +/* i2c_w_mask(sd, 0x13, 0x05, 0x05); */ + break; } return gspca_dev->usb_err; error: @@ -4085,6 +4143,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; + case SEN_OV9600: { + const struct ov_i2c_regvals *vals; + static const struct ov_i2c_regvals sxga_15[] = { + {0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals sxga_7_5[] = { + {0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75} + }; + static const struct ov_i2c_regvals vga_30[] = { + {0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60} + }; + static const struct ov_i2c_regvals vga_15[] = { + {0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70} + }; + + /* frame rates: + * 15fps / 7.5 fps for 1280x1024 + * 30fps / 15fps for 640x480 + */ + i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40); + if (qvga) + vals = sd->frame_rate < 30 ? vga_15 : vga_30; + else + vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15; + write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15)); + return; + } default: return; } @@ -4120,6 +4205,7 @@ static void set_ov_sensor_window(struct sd *sd) case SEN_OV2610AE: case SEN_OV3610: case SEN_OV7670: + case SEN_OV9600: mode_init_ov_sensor_regs(sd); return; case SEN_OV7660: @@ -4920,7 +5006,8 @@ static const struct sd_desc sd_desc = { static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, - {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x041e, 0x405f), + .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4064), diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c new file mode 100644 index 0000000..4c283c2 --- /dev/null +++ b/drivers/media/video/gspca/se401.c @@ -0,0 +1,774 @@ +/* + * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver + * + * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> + * + * Based on the v4l1 se401 driver which is: + * + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define MODULE_NAME "se401" + +#define BULK_SIZE 4096 +#define PACKET_SIZE 1024 +#define READ_REQ_SIZE 64 +#define MAX_MODES ((READ_REQ_SIZE - 6) / 4) +/* The se401 compression algorithm uses a fixed quant factor, which + can be configured by setting the high nibble of the SE401_OPERATINGMODE + feature. This needs to exactly match what is in libv4l! */ +#define SE401_QUANT_FACT 8 + +#include <linux/input.h> +#include <linux/slab.h> +#include "gspca.h" +#include "se401.h" + +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_DESCRIPTION("Endpoints se401"); +MODULE_LICENSE("GPL"); + +/* controls */ +enum e_ctrl { + BRIGHTNESS, + GAIN, + EXPOSURE, + FREQ, + NCTRL /* number of controls */ +}; + +/* exposure change state machine states */ +enum { + EXPO_CHANGED, + EXPO_DROP_FRAME, + EXPO_NO_CHANGE, +}; + +/* specific webcam descriptor */ +struct sd { + struct gspca_dev gspca_dev; /* !! must be the first item */ + struct gspca_ctrl ctrls[NCTRL]; + struct v4l2_pix_format fmts[MAX_MODES]; + int pixels_read; + int packet_read; + u8 packet[PACKET_SIZE]; + u8 restart_stream; + u8 button_state; + u8 resetlevel; + u8 resetlevel_frame_count; + int resetlevel_adjust_dir; + int expo_change_state; +}; + +static void setbrightness(struct gspca_dev *gspca_dev); +static void setgain(struct gspca_dev *gspca_dev); +static void setexposure(struct gspca_dev *gspca_dev); + +static const struct ctrl sd_ctrls[NCTRL] = { +[BRIGHTNESS] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 15, + }, + .set_control = setbrightness + }, +[GAIN] = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, + .maximum = 50, /* Really 63 but > 50 is not pretty */ + .step = 1, + .default_value = 25, + }, + .set_control = setgain + }, +[EXPOSURE] = { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 32767, + .step = 1, + .default_value = 15000, + }, + .set_control = setexposure + }, +[FREQ] = { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, + .step = 1, + .default_value = 0, + }, + .set_control = setexposure + }, +}; + +static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value, + int silent) +{ + int err; + + if (gspca_dev->usb_err < 0) + return; + + err = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, NULL, 0, 1000); + if (err < 0) { + if (!silent) + err("write req failed req %#04x val %#04x error %d", + req, value, err); + gspca_dev->usb_err = err; + } +} + +static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent) +{ + int err; + + if (gspca_dev->usb_err < 0) + return; + + if (USB_BUF_SZ < READ_REQ_SIZE) { + err("USB_BUF_SZ too small!!"); + gspca_dev->usb_err = -ENOBUFS; + return; + } + + err = usb_control_msg(gspca_dev->dev, + usb_rcvctrlpipe(gspca_dev->dev, 0), req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000); + if (err < 0) { + if (!silent) + err("read req failed req %#04x error %d", req, err); + gspca_dev->usb_err = err; + } +} + +static void se401_set_feature(struct gspca_dev *gspca_dev, + u16 selector, u16 param) +{ + int err; + + if (gspca_dev->usb_err < 0) + return; + + err = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + SE401_REQ_SET_EXT_FEATURE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + param, selector, NULL, 0, 1000); + if (err < 0) { + err("set feature failed sel %#04x param %#04x error %d", + selector, param, err); + gspca_dev->usb_err = err; + } +} + +static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector) +{ + int err; + + if (gspca_dev->usb_err < 0) + return gspca_dev->usb_err; + + if (USB_BUF_SZ < 2) { + err("USB_BUF_SZ too small!!"); + gspca_dev->usb_err = -ENOBUFS; + return gspca_dev->usb_err; + } + + err = usb_control_msg(gspca_dev->dev, + usb_rcvctrlpipe(gspca_dev->dev, 0), + SE401_REQ_GET_EXT_FEATURE, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, selector, gspca_dev->usb_buf, 2, 1000); + if (err < 0) { + err("get feature failed sel %#04x error %d", selector, err); + gspca_dev->usb_err = err; + return err; + } + return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8); +} + +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS)) + return; + + /* HDG: this does not seem to do anything on my cam */ + se401_write_req(gspca_dev, SE401_REQ_SET_BRT, + sd->ctrls[BRIGHTNESS].val, 0); +} + +static void setgain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + u16 gain = 63 - sd->ctrls[GAIN].val; + + /* red color gain */ + se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain); + /* green color gain */ + se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain); + /* blue color gain */ + se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain); +} + +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int integration = sd->ctrls[EXPOSURE].val << 6; + u8 expose_h, expose_m, expose_l; + + /* Do this before the set_feature calls, for proper timing wrt + the interrupt driven pkt_scan. Note we may still race but that + is not a big issue, the expo change state machine is merely for + avoiding underexposed frames getting send out, if one sneaks + through so be it */ + sd->expo_change_state = EXPO_CHANGED; + + if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) + integration = integration - integration % 106667; + if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ) + integration = integration - integration % 88889; + + expose_h = (integration >> 16); + expose_m = (integration >> 8); + expose_l = integration; + + /* integration time low */ + se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l); + /* integration time mid */ + se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m); + /* integration time high */ + se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h); +} + +static int sd_config(struct gspca_dev *gspca_dev, + const struct usb_device_id *id) +{ + struct sd *sd = (struct sd *)gspca_dev; + struct cam *cam = &gspca_dev->cam; + u8 *cd = gspca_dev->usb_buf; + int i, j, n; + int widths[MAX_MODES], heights[MAX_MODES]; + + /* Read the camera descriptor */ + se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1); + if (gspca_dev->usb_err) { + /* Sometimes after being idle for a while the se401 won't + respond and needs a good kicking */ + usb_reset_device(gspca_dev->dev); + gspca_dev->usb_err = 0; + se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0); + } + + /* Some cameras start with their LED on */ + se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0); + if (gspca_dev->usb_err) + return gspca_dev->usb_err; + + if (cd[1] != 0x41) { + err("Wrong descriptor type"); + return -ENODEV; + } + + if (!(cd[2] & SE401_FORMAT_BAYER)) { + err("Bayer format not supported!"); + return -ENODEV; + } + + if (cd[3]) + info("ExtraFeatures: %d", cd[3]); + + n = cd[4] | (cd[5] << 8); + if (n > MAX_MODES) { + err("Too many frame sizes"); + return -ENODEV; + } + + for (i = 0; i < n ; i++) { + widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8); + heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8); + } + + for (i = 0; i < n ; i++) { + sd->fmts[i].width = widths[i]; + sd->fmts[i].height = heights[i]; + sd->fmts[i].field = V4L2_FIELD_NONE; + sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB; + sd->fmts[i].priv = 1; + + /* janggu compression only works for 1/4th or 1/16th res */ + for (j = 0; j < n; j++) { + if (widths[j] / 2 == widths[i] && + heights[j] / 2 == heights[i]) { + sd->fmts[i].priv = 2; + break; + } + } + /* 1/16th if available too is better then 1/4th, because + we then use a larger area of the sensor */ + for (j = 0; j < n; j++) { + if (widths[j] / 4 == widths[i] && + heights[j] / 4 == heights[i]) { + sd->fmts[i].priv = 4; + break; + } + } + + if (sd->fmts[i].priv == 1) { + /* Not a 1/4th or 1/16th res, use bayer */ + sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8; + sd->fmts[i].bytesperline = widths[i]; + sd->fmts[i].sizeimage = widths[i] * heights[i]; + info("Frame size: %dx%d bayer", widths[i], heights[i]); + } else { + /* Found a match use janggu compression */ + sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401; + sd->fmts[i].bytesperline = 0; + sd->fmts[i].sizeimage = widths[i] * heights[i] * 3; + info("Frame size: %dx%d 1/%dth janggu", + widths[i], heights[i], + sd->fmts[i].priv * sd->fmts[i].priv); + } + } + + cam->cam_mode = sd->fmts; + cam->nmodes = n; + cam->bulk = 1; + cam->bulk_size = BULK_SIZE; + cam->bulk_nurbs = 4; + cam->ctrls = sd->ctrls; + gspca_dev->nbalt = 1; /* Ignore the bogus isoc alt settings */ + sd->resetlevel = 0x2d; /* Set initial resetlevel */ + + /* See if the camera supports brightness */ + se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1); + if (gspca_dev->usb_err) { + gspca_dev->ctrl_dis = (1 << BRIGHTNESS); + gspca_dev->usb_err = 0; + } + + return 0; +} + +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + return 0; +} + +/* -- start the camera -- */ +static int sd_start(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *)gspca_dev; + int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + int mode = 0; + + se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1); + if (gspca_dev->usb_err) { + /* Sometimes after being idle for a while the se401 won't + respond and needs a good kicking */ + usb_reset_device(gspca_dev->dev); + gspca_dev->usb_err = 0; + se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0); + } + se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0); + + se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05); + + /* set size + mode */ + se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH, + gspca_dev->width * mult, 0); + se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT, + gspca_dev->height * mult, 0); + /* + * HDG: disabled this as it does not seem to do anything + * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE, + * SE401_FORMAT_BAYER, 0); + */ + + switch (mult) { + case 1: /* Raw bayer */ + mode = 0x03; break; + case 2: /* 1/4th janggu */ + mode = SE401_QUANT_FACT << 4; break; + case 4: /* 1/16th janggu */ + mode = (SE401_QUANT_FACT << 4) | 0x02; break; + } + se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode); + + setbrightness(gspca_dev); + setgain(gspca_dev); + setexposure(gspca_dev); + se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel); + + sd->packet_read = 0; + sd->pixels_read = 0; + sd->restart_stream = 0; + sd->resetlevel_frame_count = 0; + sd->resetlevel_adjust_dir = 0; + sd->expo_change_state = EXPO_NO_CHANGE; + + se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0); + + return gspca_dev->usb_err; +} + +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0); + se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0); + se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0); +} + +static void sd_dq_callback(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *)gspca_dev; + unsigned int ahrc, alrc; + int oldreset, adjust_dir; + + /* Restart the stream if requested do so by pkt_scan */ + if (sd->restart_stream) { + sd_stopN(gspca_dev); + sd_start(gspca_dev); + sd->restart_stream = 0; + } + + /* Automatically adjust sensor reset level + Hyundai have some really nice docs about this and other sensor + related stuff on their homepage: www.hei.co.kr */ + sd->resetlevel_frame_count++; + if (sd->resetlevel_frame_count < 20) + return; + + /* For some reason this normally read-only register doesn't get reset + to zero after reading them just once... */ + se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH); + se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL); + se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH); + se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL); + ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) + + se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL); + alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) + + se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL); + + /* Not an exact science, but it seems to work pretty well... */ + oldreset = sd->resetlevel; + if (alrc > 10) { + while (alrc >= 10 && sd->resetlevel < 63) { + sd->resetlevel++; + alrc /= 2; + } + } else if (ahrc > 20) { + while (ahrc >= 20 && sd->resetlevel > 0) { + sd->resetlevel--; + ahrc /= 2; + } + } + /* Detect ping-pong-ing and halve adjustment to avoid overshoot */ + if (sd->resetlevel > oldreset) + adjust_dir = 1; + else + adjust_dir = -1; + if (sd->resetlevel_adjust_dir && + sd->resetlevel_adjust_dir != adjust_dir) + sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2; + + if (sd->resetlevel != oldreset) { + sd->resetlevel_adjust_dir = adjust_dir; + se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel); + } + + sd->resetlevel_frame_count = 0; +} + +static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len) +{ + struct sd *sd = (struct sd *)gspca_dev; + + switch (sd->expo_change_state) { + case EXPO_CHANGED: + /* The exposure was changed while this frame + was being send, so this frame is ok */ + sd->expo_change_state = EXPO_DROP_FRAME; + break; + case EXPO_DROP_FRAME: + /* The exposure was changed while this frame + was being captured, drop it! */ + gspca_dev->last_packet_type = DISCARD_PACKET; + sd->expo_change_state = EXPO_NO_CHANGE; + break; + case EXPO_NO_CHANGE: + break; + } + gspca_frame_add(gspca_dev, LAST_PACKET, data, len); +} + +static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len) +{ + struct sd *sd = (struct sd *)gspca_dev; + int imagesize = gspca_dev->width * gspca_dev->height; + int i, plen, bits, pixels, info, count; + + if (sd->restart_stream) + return; + + /* Sometimes a 1024 bytes garbage bulk packet is send between frames */ + if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) { + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } + + i = 0; + while (i < len) { + /* Read header if not already be present from prev bulk pkt */ + if (sd->packet_read < 4) { + count = 4 - sd->packet_read; + if (count > len - i) + count = len - i; + memcpy(&sd->packet[sd->packet_read], &data[i], count); + sd->packet_read += count; + i += count; + if (sd->packet_read < 4) + break; + } + bits = sd->packet[3] + (sd->packet[2] << 8); + pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8); + info = (sd->packet[0] & 0xc0) >> 6; + plen = ((bits + 47) >> 4) << 1; + /* Sanity checks */ + if (plen > 1024) { + err("invalid packet len %d restarting stream", plen); + goto error; + } + if (info == 3) { + err("unknown frame info value restarting stream"); + goto error; + } + + /* Read (remainder of) packet contents */ + count = plen - sd->packet_read; + if (count > len - i) + count = len - i; + memcpy(&sd->packet[sd->packet_read], &data[i], count); + sd->packet_read += count; + i += count; + if (sd->packet_read < plen) + break; + + sd->pixels_read += pixels; + sd->packet_read = 0; + + switch (info) { + case 0: /* Frame data */ + gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet, + plen); + break; + case 1: /* EOF */ + if (sd->pixels_read != imagesize) { + err("frame size %d expected %d", + sd->pixels_read, imagesize); + goto error; + } + sd_complete_frame(gspca_dev, sd->packet, plen); + return; /* Discard the rest of the bulk packet !! */ + case 2: /* SOF */ + gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet, + plen); + sd->pixels_read = pixels; + break; + } + } + return; + +error: + sd->restart_stream = 1; + /* Give userspace a 0 bytes frame, so our dq callback gets + called and it can restart the stream */ + gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); +} + +static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len) +{ + struct cam *cam = &gspca_dev->cam; + int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage; + + if (gspca_dev->image_len == 0) { + gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); + return; + } + + if (gspca_dev->image_len + len >= imagesize) { + sd_complete_frame(gspca_dev, data, len); + return; + } + + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); +} + +static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len) +{ + int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; + + if (len == 0) + return; + + if (mult == 1) /* mult == 1 means raw bayer */ + sd_pkt_scan_bayer(gspca_dev, data, len); + else + sd_pkt_scan_janggu(gspca_dev, data, len); +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED: + strcpy((char *) menu->name, "NoFliker"); + return 0; + case V4L2_CID_POWER_LINE_FREQUENCY_50HZ: + strcpy((char *) menu->name, "50 Hz"); + return 0; + case V4L2_CID_POWER_LINE_FREQUENCY_60HZ: + strcpy((char *) menu->name, "60 Hz"); + return 0; + } + break; + } + return -EINVAL; +} + +#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) +static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len) +{ + struct sd *sd = (struct sd *)gspca_dev; + u8 state; + + if (len != 2) + return -EINVAL; + + switch (data[0]) { + case 0: + case 1: + state = data[0]; + break; + default: + return -EINVAL; + } + if (sd->button_state != state) { + input_report_key(gspca_dev->input_dev, KEY_CAMERA, state); + input_sync(gspca_dev->input_dev); + sd->button_state = state; + } + + return 0; +} +#endif + +/* sub-driver description */ +static const struct sd_desc sd_desc = { + .name = MODULE_NAME, + .ctrls = sd_ctrls, + .nctrls = ARRAY_SIZE(sd_ctrls), + .config = sd_config, + .init = sd_init, + .start = sd_start, + .stopN = sd_stopN, + .dq_callback = sd_dq_callback, + .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, +#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) + .int_pkt_scan = sd_int_pkt_scan, +#endif +}; + +/* -- module initialisation -- */ +static const struct usb_device_id device_table[] = { + {USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */ + {USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */ + {USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */ + {USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */ + {USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */ + {} +}; +MODULE_DEVICE_TABLE(usb, device_table); + +/* -- device connect -- */ +static int sd_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + THIS_MODULE); +} + +static int sd_pre_reset(struct usb_interface *intf) +{ + return 0; +} + +static int sd_post_reset(struct usb_interface *intf) +{ + return 0; +} + +static struct usb_driver sd_driver = { + .name = MODULE_NAME, + .id_table = device_table, + .probe = sd_probe, + .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif + .pre_reset = sd_pre_reset, + .post_reset = sd_post_reset, +}; + +/* -- module insert / remove -- */ +static int __init sd_mod_init(void) +{ + return usb_register(&sd_driver); +} +static void __exit sd_mod_exit(void) +{ + usb_deregister(&sd_driver); +} + +module_init(sd_mod_init); +module_exit(sd_mod_exit); diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/video/gspca/se401.h new file mode 100644 index 0000000..96d8ebf --- /dev/null +++ b/drivers/media/video/gspca/se401.h @@ -0,0 +1,90 @@ +/* + * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver + * + * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> + * + * Based on the v4l1 se401 driver which is: + * + * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06 +#define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41 +#define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42 +#define SE401_REQ_CAPTURE_FRAME 0x43 +#define SE401_REQ_GET_BRT 0x44 +#define SE401_REQ_SET_BRT 0x45 +#define SE401_REQ_GET_WIDTH 0x4c +#define SE401_REQ_SET_WIDTH 0x4d +#define SE401_REQ_GET_HEIGHT 0x4e +#define SE401_REQ_SET_HEIGHT 0x4f +#define SE401_REQ_GET_OUTPUT_MODE 0x50 +#define SE401_REQ_SET_OUTPUT_MODE 0x51 +#define SE401_REQ_GET_EXT_FEATURE 0x52 +#define SE401_REQ_SET_EXT_FEATURE 0x53 +#define SE401_REQ_CAMERA_POWER 0x56 +#define SE401_REQ_LED_CONTROL 0x57 +#define SE401_REQ_BIOS 0xff + +#define SE401_BIOS_READ 0x07 + +#define SE401_FORMAT_BAYER 0x40 + +/* Hyundai hv7131b registers + 7121 and 7141 should be the same (haven't really checked...) */ +/* Mode registers: */ +#define HV7131_REG_MODE_A 0x00 +#define HV7131_REG_MODE_B 0x01 +#define HV7131_REG_MODE_C 0x02 +/* Frame registers: */ +#define HV7131_REG_FRSU 0x10 +#define HV7131_REG_FRSL 0x11 +#define HV7131_REG_FCSU 0x12 +#define HV7131_REG_FCSL 0x13 +#define HV7131_REG_FWHU 0x14 +#define HV7131_REG_FWHL 0x15 +#define HV7131_REG_FWWU 0x16 +#define HV7131_REG_FWWL 0x17 +/* Timing registers: */ +#define HV7131_REG_THBU 0x20 +#define HV7131_REG_THBL 0x21 +#define HV7131_REG_TVBU 0x22 +#define HV7131_REG_TVBL 0x23 +#define HV7131_REG_TITU 0x25 +#define HV7131_REG_TITM 0x26 +#define HV7131_REG_TITL 0x27 +#define HV7131_REG_TMCD 0x28 +/* Adjust Registers: */ +#define HV7131_REG_ARLV 0x30 +#define HV7131_REG_ARCG 0x31 +#define HV7131_REG_AGCG 0x32 +#define HV7131_REG_ABCG 0x33 +#define HV7131_REG_APBV 0x34 +#define HV7131_REG_ASLP 0x54 +/* Offset Registers: */ +#define HV7131_REG_OFSR 0x50 +#define HV7131_REG_OFSG 0x51 +#define HV7131_REG_OFSB 0x52 +/* REset level statistics registers: */ +#define HV7131_REG_LOREFNOH 0x57 +#define HV7131_REG_LOREFNOL 0x58 +#define HV7131_REG_HIREFNOH 0x59 +#define HV7131_REG_HIREFNOL 0x5a + +/* se401 registers */ +#define SE401_OPERATINGMODE 0x2000 diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index b089c0d..6ec2329 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -247,7 +247,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = { {0x30, 0x0004, 0x000a}, {0xb0, 0x0001, 0x0000}, - {0xa1, 0x0080, 0x0001}, {0x30, 0x0049, 0x0000}, {0x30, 0x0060, 0x0005}, @@ -256,8 +255,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = { {0x00, 0x0000, 0x2000}, {0x00, 0x0013, 0x2301}, {0x00, 0x0003, 0x2000}, - {0x00, 0x0000, 0x2000}, - }; /* clicksmart 420 open data ? */ diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 7e762d5..d1d733b 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -1387,7 +1387,7 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, return 0; case V4L2_CID_EFFECTS: if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) { - strncpy((char *) menu->name, + strlcpy((char *) menu->name, effects_control[menu->index], sizeof menu->name); return 0; diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index 5f1db46..441dacf 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -474,5 +474,6 @@ module_init(hdpvr_init); module_exit(hdpvr_exit); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.2.1"); MODULE_AUTHOR("Janne Grunau"); MODULE_DESCRIPTION("Hauppauge HD PVR driver"); diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index 514aea7..087f7c0 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -17,7 +17,6 @@ #include <linux/uaccess.h> #include <linux/usb.h> #include <linux/mutex.h> -#include <linux/version.h> #include <linux/workqueue.h> #include <linux/videodev2.h> @@ -574,7 +573,6 @@ static int vidioc_querycap(struct file *file, void *priv, strcpy(cap->driver, "hdpvr"); strcpy(cap->card, "Hauppauge HD PVR"); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = HDPVR_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE; diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index 072f23c..d6439db 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -18,12 +18,6 @@ #include <media/v4l2-device.h> #include <media/ir-kbd-i2c.h> -#define HDPVR_MAJOR_VERSION 0 -#define HDPVR_MINOR_VERSION 2 -#define HDPVR_RELEASE 0 -#define HDPVR_VERSION \ - KERNEL_VERSION(HDPVR_MAJOR_VERSION, HDPVR_MINOR_VERSION, HDPVR_RELEASE) - #define HDPVR_MAX 8 #define HDPVR_I2C_MAX_SIZE 128 diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 84bdf0f..8f9cc17 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -36,7 +36,6 @@ * using information provided by Jiun-Kuei Jung @ AVerMedia. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index a7f54b0..38f0522 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -722,8 +722,8 @@ unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait) /* If there are subscribed events, then only use the new event API instead of the old video.h based API. */ - if (!list_empty(&id->fh.events->subscribed)) { - poll_wait(filp, &id->fh.events->wait, wait); + if (!list_empty(&id->fh.subscribed)) { + poll_wait(filp, &id->fh.wait, wait); /* Turn off the old-style vsync events */ clear_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags); if (v4l2_event_pending(&id->fh)) @@ -750,6 +750,7 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait) struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[id->type]; int eof = test_bit(IVTV_F_S_STREAMOFF, &s->s_flags); + unsigned res = 0; /* Start a capture if there is none */ if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) { @@ -769,12 +770,16 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait) /* add stream's waitq to the poll list */ IVTV_DEBUG_HI_FILE("Encoder poll\n"); poll_wait(filp, &s->waitq, wait); + if (v4l2_event_pending(&id->fh)) + res |= POLLPRI; + else + poll_wait(filp, &id->fh.wait, wait); if (s->q_full.length || s->q_io.length) - return POLLIN | POLLRDNORM; + return res | POLLIN | POLLRDNORM; if (eof) - return POLLHUP; - return 0; + return res | POLLHUP; + return res; } void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end) @@ -961,10 +966,6 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) return -ENOMEM; } v4l2_fh_init(&item->fh, s->vdev); - if (s->type == IVTV_DEC_STREAM_TYPE_YUV || - s->type == IVTV_DEC_STREAM_TYPE_MPG) { - res = v4l2_event_alloc(&item->fh, 60); - } if (res < 0) { v4l2_fh_exit(&item->fh); kfree(item); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 120c7d8..3e5c090 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -757,7 +757,6 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver)); strlcpy(vcap->card, itv->card_name, sizeof(vcap->card)); snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev)); - vcap->version = IVTV_DRIVER_VERSION; /* version */ vcap->capabilities = itv->v4l2_cap; /* capabilities */ return 0; } @@ -1451,11 +1450,11 @@ static int ivtv_subscribe_event(struct v4l2_fh *fh, struct v4l2_event_subscripti switch (sub->type) { case V4L2_EVENT_VSYNC: case V4L2_EVENT_EOS: - break; + case V4L2_EVENT_CTRL: + return v4l2_event_subscribe(fh, sub, 0); default: return -EINVAL; } - return v4l2_event_subscribe(fh, sub); } static int ivtv_log_status(struct file *file, void *fh) diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index b67a404..a20f346 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -21,11 +21,6 @@ #define IVTV_VERSION_H #define IVTV_DRIVER_NAME "ivtv" -#define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 4 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 2 - -#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) -#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) +#define IVTV_VERSION "1.4.3" #endif diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c index a45d8f0..3248ac8 100644 --- a/drivers/media/video/m5mols/m5mols_capture.c +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/version.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/videodev2.h> diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 43c68f5..fb8e4a7 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/version.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/videodev2.h> diff --git a/drivers/media/video/marvell-ccic/Kconfig b/drivers/media/video/marvell-ccic/Kconfig new file mode 100644 index 0000000..bf739e3 --- /dev/null +++ b/drivers/media/video/marvell-ccic/Kconfig @@ -0,0 +1,23 @@ +config VIDEO_CAFE_CCIC + tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" + depends on PCI && I2C && VIDEO_V4L2 + select VIDEO_OV7670 + select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG + ---help--- + This is a video4linux2 driver for the Marvell 88ALP01 integrated + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + +config VIDEO_MMP_CAMERA + tristate "Marvell Armada 610 integrated camera controller support" + depends on ARCH_MMP && I2C && VIDEO_V4L2 + select VIDEO_OV7670 + select I2C_GPIO + select VIDEOBUF2_DMA_SG + ---help--- + This is a Video4Linux2 driver for the integrated camera + controller found on Marvell Armada 610 application + processors (and likely beyond). This is the controller found + in OLPC XO 1.75 systems. + diff --git a/drivers/media/video/marvell-ccic/Makefile b/drivers/media/video/marvell-ccic/Makefile new file mode 100644 index 0000000..05a792c5 --- /dev/null +++ b/drivers/media/video/marvell-ccic/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o +cafe_ccic-y := cafe-driver.o mcam-core.o + +obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o +mmp_camera-y := mmp-driver.o mcam-core.o + diff --git a/drivers/media/video/marvell-ccic/cafe-driver.c b/drivers/media/video/marvell-ccic/cafe-driver.c new file mode 100644 index 0000000..d030f9b --- /dev/null +++ b/drivers/media/video/marvell-ccic/cafe-driver.c @@ -0,0 +1,654 @@ +/* + * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe" + * multifunction chip. Currently works with the Omnivision OV7670 + * sensor. + * + * The data sheet for this device can be found at: + * http://www.marvell.com/products/pc_connectivity/88alp01/ + * + * Copyright 2006-11 One Laptop Per Child Association, Inc. + * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net> + * + * Written by Jonathan Corbet, corbet@lwn.net. + * + * v4l2_device/v4l2_subdev conversion by: + * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl> + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <linux/device.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "mcam-core.h" + +#define CAFE_VERSION 0x000002 + + +/* + * Parameters. + */ +MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); +MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Video"); + + + + +struct cafe_camera { + int registered; /* Fully initialized? */ + struct mcam_camera mcam; + struct pci_dev *pdev; + wait_queue_head_t smbus_wait; /* Waiting on i2c events */ +}; + +/* + * Most of the camera controller registers are defined in mcam-core.h, + * but the Cafe platform has some additional registers of its own; + * they are described here. + */ + +/* + * "General purpose register" has a couple of GPIOs used for sensor + * power and reset on OLPC XO 1.0 systems. + */ +#define REG_GPR 0xb4 +#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ +#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ +#define GPR_C1 0x00000002 /* Control 1 value */ +/* + * Control 0 is wired to reset on OLPC machines. For ov7x sensors, + * it is active low. + */ +#define GPR_C0 0x00000001 /* Control 0 value */ + +/* + * These registers control the SMBUS module for communicating + * with the sensor. + */ +#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ +#define TWSIC0_EN 0x00000001 /* TWSI enable */ +#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ +#define TWSIC0_SID 0x000003fc /* Slave ID */ +/* + * Subtle trickery: the slave ID field starts with bit 2. But the + * Linux i2c stack wants to treat the bottommost bit as a separate + * read/write bit, which is why slave ID's are usually presented + * >>1. For consistency with that behavior, we shift over three + * bits instead of two. + */ +#define TWSIC0_SID_SHIFT 3 +#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ +#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ +#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ + +#define REG_TWSIC1 0xbc /* TWSI control 1 */ +#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ +#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ +#define TWSIC1_ADDR_SHIFT 16 +#define TWSIC1_READ 0x01000000 /* Set for read op */ +#define TWSIC1_WSTAT 0x02000000 /* Write status */ +#define TWSIC1_RVALID 0x04000000 /* Read data valid */ +#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ + +/* + * Here's the weird global control registers + */ +#define REG_GL_CSR 0x3004 /* Control/status register */ +#define GCSR_SRS 0x00000001 /* SW Reset set */ +#define GCSR_SRC 0x00000002 /* SW Reset clear */ +#define GCSR_MRS 0x00000004 /* Master reset set */ +#define GCSR_MRC 0x00000008 /* HW Reset clear */ +#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ +#define REG_GL_IMASK 0x300c /* Interrupt mask register */ +#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ + +#define REG_GL_FCR 0x3038 /* GPIO functional control register */ +#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ +#define REG_GL_GPIOR 0x315c /* GPIO register */ +#define GGPIO_OUT 0x80000 /* GPIO output */ +#define GGPIO_VAL 0x00008 /* Output pin value */ + +#define REG_LEN (REG_GL_IMASK + 4) + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err(&(cam)->pdev->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn(&(cam)->pdev->dev, fmt, ##arg); + +/* -------------------------------------------------------------------- */ +/* + * The I2C/SMBUS interface to the camera itself starts here. The + * controller handles SMBUS itself, presenting a relatively simple register + * interface; all we have to do is to tell it where to route the data. + */ +#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */ + +static inline struct cafe_camera *to_cam(struct v4l2_device *dev) +{ + struct mcam_camera *m = container_of(dev, struct mcam_camera, v4l2_dev); + return container_of(m, struct cafe_camera, mcam); +} + + +static int cafe_smbus_write_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT; +} + +static int cafe_smbus_write_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvell sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + /* Unfortunately, reading TWSIC1 too soon after sending a command + * causes the device to die. + * Use a busy-wait because we often send a large quantity of small + * commands at-once; using msleep() would cause a lot of context + * switches which take longer than 2ms, resulting in a noticeable + * boot-time and capture-start delays. + */ + mdelay(2); + + /* + * Another sad fact is that sometimes, commands silently complete but + * cafe_smbus_write_done() never becomes aware of this. + * This happens at random and appears to possible occur with any + * command. + * We don't understand why this is. We work around this issue + * with the timeout in the wait below, assuming that all commands + * complete within the timeout. + */ + wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam), + CAFE_SMBUS_TIMEOUT); + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_WSTAT) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr, + command, value); + return -EIO; + } + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr, + command, value); + return -EIO; + } + return 0; +} + + + +static int cafe_smbus_read_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return c1 & (TWSIC1_RVALID|TWSIC1_ERROR); +} + + + +static int cafe_smbus_read_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 *value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvel sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + wait_event_timeout(cam->smbus_wait, + cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT); + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command); + return -EIO; + } + if (!(rval & TWSIC1_RVALID)) { + cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr, + command); + return -EIO; + } + *value = rval & 0xff; + return 0; +} + +/* + * Perform a transfer over SMBUS. This thing is called under + * the i2c bus lock, so we shouldn't race with ourselves... + */ +static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char rw, u8 command, + int size, union i2c_smbus_data *data) +{ + struct cafe_camera *cam = i2c_get_adapdata(adapter); + int ret = -EINVAL; + + /* + * This interface would appear to only do byte data ops. OK + * it can do word too, but the cam chip has no use for that. + */ + if (size != I2C_SMBUS_BYTE_DATA) { + cam_err(cam, "funky xfer size %d\n", size); + return -EINVAL; + } + + if (rw == I2C_SMBUS_WRITE) + ret = cafe_smbus_write_data(cam, addr, command, data->byte); + else if (rw == I2C_SMBUS_READ) + ret = cafe_smbus_read_data(cam, addr, command, &data->byte); + return ret; +} + + +static void cafe_smbus_enable_irq(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->mcam.dev_lock, flags); + mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS); + spin_unlock_irqrestore(&cam->mcam.dev_lock, flags); +} + +static u32 cafe_smbus_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + +static struct i2c_algorithm cafe_smbus_algo = { + .smbus_xfer = cafe_smbus_xfer, + .functionality = cafe_smbus_func +}; + +static int cafe_smbus_setup(struct cafe_camera *cam) +{ + struct i2c_adapter *adap; + int ret; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) + return -ENOMEM; + cam->mcam.i2c_adapter = adap; + cafe_smbus_enable_irq(cam); + adap->owner = THIS_MODULE; + adap->algo = &cafe_smbus_algo; + strcpy(adap->name, "cafe_ccic"); + adap->dev.parent = &cam->pdev->dev; + i2c_set_adapdata(adap, cam); + ret = i2c_add_adapter(adap); + if (ret) + printk(KERN_ERR "Unable to register cafe i2c adapter\n"); + return ret; +} + +static void cafe_smbus_shutdown(struct cafe_camera *cam) +{ + i2c_del_adapter(cam->mcam.i2c_adapter); + kfree(cam->mcam.i2c_adapter); +} + + +/* + * Controller-level stuff + */ + +static void cafe_ctlr_init(struct mcam_camera *mcam) +{ + unsigned long flags; + + spin_lock_irqsave(&mcam->dev_lock, flags); + /* + * Added magic to bring up the hardware on the B-Test board + */ + mcam_reg_write(mcam, 0x3038, 0x8); + mcam_reg_write(mcam, 0x315c, 0x80008); + /* + * Go through the dance needed to wake the device up. + * Note that these registers are global and shared + * with the NAND and SD devices. Interaction between the + * three still needs to be examined. + */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC); + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS); + /* + * Here we must wait a bit for the controller to come around. + */ + spin_unlock_irqrestore(&mcam->dev_lock, flags); + msleep(5); + spin_lock_irqsave(&mcam->dev_lock, flags); + + mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); + mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN); + /* + * Mask all interrupts. + */ + mcam_reg_write(mcam, REG_IRQMASK, 0); + spin_unlock_irqrestore(&mcam->dev_lock, flags); +} + + +static void cafe_ctlr_power_up(struct mcam_camera *mcam) +{ + /* + * Part one of the sensor dance: turn the global + * GPIO signal on. + */ + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL); + /* + * Put the sensor into operational mode (assumes OLPC-style + * wiring). Control 0 is reset - set to 1 to operate. + * Control 1 is power down, set to 0 to operate. + */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); +} + +static void cafe_ctlr_power_down(struct mcam_camera *mcam) +{ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT); +} + + + +/* + * The platform interrupt handler. + */ +static irqreturn_t cafe_irq(int irq, void *data) +{ + struct cafe_camera *cam = data; + struct mcam_camera *mcam = &cam->mcam; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = cam->registered && mccic_irq(mcam, irqs); + if (irqs & TWSIIRQS) { + mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS); + wake_up(&cam->smbus_wait); + handled = 1; + } + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + + +/* -------------------------------------------------------------------------- */ +/* + * PCI interface stuff. + */ + +static int cafe_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct cafe_camera *cam; + struct mcam_camera *mcam; + + /* + * Start putting together one of our big camera structures. + */ + ret = -ENOMEM; + cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL); + if (cam == NULL) + goto out; + cam->pdev = pdev; + mcam = &cam->mcam; + mcam->chip_id = V4L2_IDENT_CAFE; + spin_lock_init(&mcam->dev_lock); + init_waitqueue_head(&cam->smbus_wait); + mcam->plat_power_up = cafe_ctlr_power_up; + mcam->plat_power_down = cafe_ctlr_power_down; + mcam->dev = &pdev->dev; + /* + * Set the clock speed for the XO 1; I don't believe this + * driver has ever run anywhere else. + */ + mcam->clock_speed = 45; + mcam->use_smbus = 1; + /* + * Vmalloc mode for buffers is traditional with this driver. + * We *might* be able to run DMA_contig, especially on a system + * with CMA in it. + */ + mcam->buffer_mode = B_vmalloc; + /* + * Get set up on the PCI bus. + */ + ret = pci_enable_device(pdev); + if (ret) + goto out_free; + pci_set_master(pdev); + + ret = -EIO; + mcam->regs = pci_iomap(pdev, 0, 0); + if (!mcam->regs) { + printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); + goto out_disable; + } + ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); + if (ret) + goto out_iounmap; + + /* + * Initialize the controller and leave it powered up. It will + * stay that way until the sensor driver shows up. + */ + cafe_ctlr_init(mcam); + cafe_ctlr_power_up(mcam); + /* + * Set up I2C/SMBUS communications. We have to drop the mutex here + * because the sensor could attach in this call chain, leading to + * unsightly deadlocks. + */ + ret = cafe_smbus_setup(cam); + if (ret) + goto out_pdown; + + ret = mccic_register(mcam); + if (ret == 0) { + cam->registered = 1; + return 0; + } + + cafe_smbus_shutdown(cam); +out_pdown: + cafe_ctlr_power_down(mcam); + free_irq(pdev->irq, cam); +out_iounmap: + pci_iounmap(pdev, mcam->regs); +out_disable: + pci_disable_device(pdev); +out_free: + kfree(cam); +out: + return ret; +} + + +/* + * Shut down an initialized device + */ +static void cafe_shutdown(struct cafe_camera *cam) +{ + mccic_shutdown(&cam->mcam); + cafe_smbus_shutdown(cam); + free_irq(cam->pdev->irq, cam); + pci_iounmap(cam->pdev, cam->mcam.regs); +} + + +static void cafe_pci_remove(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + + if (cam == NULL) { + printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev); + return; + } + cafe_shutdown(cam); + kfree(cam); +} + + +#ifdef CONFIG_PM +/* + * Basic power management. + */ +static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + mccic_suspend(&cam->mcam); + pci_disable_device(pdev); + return 0; +} + + +static int cafe_pci_resume(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret = 0; + + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + + if (ret) { + cam_warn(cam, "Unable to re-enable device on resume!\n"); + return ret; + } + cafe_ctlr_init(&cam->mcam); + return mccic_resume(&cam->mcam); +} + +#endif /* CONFIG_PM */ + +static struct pci_device_id cafe_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, + PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, cafe_ids); + +static struct pci_driver cafe_pci_driver = { + .name = "cafe1000-ccic", + .id_table = cafe_ids, + .probe = cafe_pci_probe, + .remove = cafe_pci_remove, +#ifdef CONFIG_PM + .suspend = cafe_pci_suspend, + .resume = cafe_pci_resume, +#endif +}; + + + + +static int __init cafe_init(void) +{ + int ret; + + printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", + CAFE_VERSION); + ret = pci_register_driver(&cafe_pci_driver); + if (ret) { + printk(KERN_ERR "Unable to register cafe_ccic driver\n"); + goto out; + } + ret = 0; + +out: + return ret; +} + + +static void __exit cafe_exit(void) +{ + pci_unregister_driver(&cafe_pci_driver); +} + +module_init(cafe_init); +module_exit(cafe_exit); diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c new file mode 100644 index 0000000..83c1451 --- /dev/null +++ b/drivers/media/video/marvell-ccic/mcam-core.c @@ -0,0 +1,1843 @@ +/* + * The Marvell camera core. This device appears in a number of settings, + * so it needs platform-specific support outside of the core. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/wait.h> +#include <linux/list.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/vmalloc.h> +#include <linux/io.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-chip-ident.h> +#include <media/ov7670.h> +#include <media/videobuf2-vmalloc.h> +#include <media/videobuf2-dma-contig.h> +#include <media/videobuf2-dma-sg.h> + +#include "mcam-core.h" + +/* + * Basic frame stats - to be deleted shortly + */ +static int frames; +static int singles; +static int delivered; + +#ifdef MCAM_MODE_VMALLOC +/* + * Internal DMA buffer management. Since the controller cannot do S/G I/O, + * we must have physically contiguous buffers to bring frames into. + * These parameters control how many buffers we use, whether we + * allocate them at load time (better chance of success, but nails down + * memory) or when somebody tries to use the camera (riskier), and, + * for load-time allocation, how big they should be. + * + * The controller can cycle through three buffers. We could use + * more by flipping pointers around, but it probably makes little + * sense. + */ + +static int alloc_bufs_at_read; +module_param(alloc_bufs_at_read, bool, 0444); +MODULE_PARM_DESC(alloc_bufs_at_read, + "Non-zero value causes DMA buffers to be allocated when the " + "video capture device is read, rather than at module load " + "time. This saves memory, but decreases the chances of " + "successfully getting those buffers. This parameter is " + "only used in the vmalloc buffer mode"); + +static int n_dma_bufs = 3; +module_param(n_dma_bufs, uint, 0644); +MODULE_PARM_DESC(n_dma_bufs, + "The number of DMA buffers to allocate. Can be either two " + "(saves memory, makes timing tighter) or three."); + +static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ +module_param(dma_buf_size, uint, 0444); +MODULE_PARM_DESC(dma_buf_size, + "The size of the allocated DMA buffers. If actual operating " + "parameters require larger buffers, an attempt to reallocate " + "will be made."); +#else /* MCAM_MODE_VMALLOC */ +static const int alloc_bufs_at_read = 0; +static const int n_dma_bufs = 3; /* Used by S/G_PARM */ +#endif /* MCAM_MODE_VMALLOC */ + +static int flip; +module_param(flip, bool, 0444); +MODULE_PARM_DESC(flip, + "If set, the sensor will be instructed to flip the image " + "vertically."); + +static int buffer_mode = -1; +module_param(buffer_mode, int, 0444); +MODULE_PARM_DESC(buffer_mode, + "Set the buffer mode to be used; default is to go with what " + "the platform driver asks for. Set to 0 for vmalloc, 1 for " + "DMA contiguous."); + +/* + * Status flags. Always manipulated with bit operations. + */ +#define CF_BUF0_VALID 0 /* Buffers valid - first three */ +#define CF_BUF1_VALID 1 +#define CF_BUF2_VALID 2 +#define CF_DMA_ACTIVE 3 /* A frame is incoming */ +#define CF_CONFIG_NEEDED 4 /* Must configure hardware */ +#define CF_SINGLE_BUFFER 5 /* Running with a single buffer */ +#define CF_SG_RESTART 6 /* SG restart needed */ + +#define sensor_call(cam, o, f, args...) \ + v4l2_subdev_call(cam->sensor, o, f, ##args) + +static struct mcam_format_struct { + __u8 *desc; + __u32 pixelformat; + int bpp; /* Bytes per pixel */ + enum v4l2_mbus_pixelcode mbus_code; +} mcam_formats[] = { + { + .desc = "YUYV 4:2:2", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, + .bpp = 2, + }, + { + .desc = "RGB 444", + .pixelformat = V4L2_PIX_FMT_RGB444, + .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 2, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, + .bpp = 2, + }, + { + .desc = "Raw RGB Bayer", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8, + .bpp = 1 + }, +}; +#define N_MCAM_FMTS ARRAY_SIZE(mcam_formats) + +static struct mcam_format_struct *mcam_find_format(u32 pixelformat) +{ + unsigned i; + + for (i = 0; i < N_MCAM_FMTS; i++) + if (mcam_formats[i].pixelformat == pixelformat) + return mcam_formats + i; + /* Not found? Then return the first format. */ + return mcam_formats; +} + +/* + * The default format we use until somebody says otherwise. + */ +static const struct v4l2_pix_format mcam_def_pix_format = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .pixelformat = V4L2_PIX_FMT_YUYV, + .field = V4L2_FIELD_NONE, + .bytesperline = VGA_WIDTH*2, + .sizeimage = VGA_WIDTH*VGA_HEIGHT*2, +}; + +static const enum v4l2_mbus_pixelcode mcam_def_mbus_code = + V4L2_MBUS_FMT_YUYV8_2X8; + + +/* + * The two-word DMA descriptor format used by the Armada 610 and like. There + * Is a three-word format as well (set C1_DESC_3WORD) where the third + * word is a pointer to the next descriptor, but we don't use it. Two-word + * descriptors have to be contiguous in memory. + */ +struct mcam_dma_desc { + u32 dma_addr; + u32 segment_len; +}; + +/* + * Our buffer type for working with videobuf2. Note that the vb2 + * developers have decreed that struct vb2_buffer must be at the + * beginning of this structure. + */ +struct mcam_vb_buffer { + struct vb2_buffer vb_buf; + struct list_head queue; + struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ + dma_addr_t dma_desc_pa; /* Descriptor physical address */ + int dma_desc_nent; /* Number of mapped descriptors */ +}; + +static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb) +{ + return container_of(vb, struct mcam_vb_buffer, vb_buf); +} + +/* + * Hand a completed buffer back to user space. + */ +static void mcam_buffer_done(struct mcam_camera *cam, int frame, + struct vb2_buffer *vbuf) +{ + vbuf->v4l2_buf.bytesused = cam->pix_format.sizeimage; + vbuf->v4l2_buf.sequence = cam->buf_seq[frame]; + vb2_set_plane_payload(vbuf, 0, cam->pix_format.sizeimage); + vb2_buffer_done(vbuf, VB2_BUF_STATE_DONE); +} + + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err((cam)->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn((cam)->dev, fmt, ##arg); +#define cam_dbg(cam, fmt, arg...) \ + dev_dbg((cam)->dev, fmt, ##arg); + + +/* + * Flag manipulation helpers + */ +static void mcam_reset_buffers(struct mcam_camera *cam) +{ + int i; + + cam->next_buf = -1; + for (i = 0; i < cam->nbufs; i++) + clear_bit(i, &cam->flags); +} + +static inline int mcam_needs_config(struct mcam_camera *cam) +{ + return test_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +static void mcam_set_config_needed(struct mcam_camera *cam, int needed) +{ + if (needed) + set_bit(CF_CONFIG_NEEDED, &cam->flags); + else + clear_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +/* ------------------------------------------------------------------- */ +/* + * Make the controller start grabbing images. Everything must + * be set up before doing this. + */ +static void mcam_ctlr_start(struct mcam_camera *cam) +{ + /* set_bit performs a read, so no other barrier should be + needed here */ + mcam_reg_set_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void mcam_ctlr_stop(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); +} + +/* ------------------------------------------------------------------- */ + +#ifdef MCAM_MODE_VMALLOC +/* + * Code specific to the vmalloc buffer mode. + */ + +/* + * Allocate in-kernel DMA buffers for vmalloc mode. + */ +static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + int i; + + mcam_set_config_needed(cam, 1); + if (loadtime) + cam->dma_buf_size = dma_buf_size; + else + cam->dma_buf_size = cam->pix_format.sizeimage; + if (n_dma_bufs > 3) + n_dma_bufs = 3; + + cam->nbufs = 0; + for (i = 0; i < n_dma_bufs; i++) { + cam->dma_bufs[i] = dma_alloc_coherent(cam->dev, + cam->dma_buf_size, cam->dma_handles + i, + GFP_KERNEL); + if (cam->dma_bufs[i] == NULL) { + cam_warn(cam, "Failed to allocate DMA buffer\n"); + break; + } + (cam->nbufs)++; + } + + switch (cam->nbufs) { + case 1: + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[0], cam->dma_handles[0]); + cam->nbufs = 0; + case 0: + cam_err(cam, "Insufficient DMA buffers, cannot operate\n"); + return -ENOMEM; + + case 2: + if (n_dma_bufs > 2) + cam_warn(cam, "Will limp along with only 2 buffers\n"); + break; + } + return 0; +} + +static void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + int i; + + for (i = 0; i < cam->nbufs; i++) { + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[i], cam->dma_handles[i]); + cam->dma_bufs[i] = NULL; + } + cam->nbufs = 0; +} + + +/* + * Set up DMA buffers when operating in vmalloc mode + */ +static void mcam_ctlr_dma_vmalloc(struct mcam_camera *cam) +{ + /* + * Store the first two Y buffers (we aren't supporting + * planar formats for now, so no UV bufs). Then either + * set the third if it exists, or tell the controller + * to just use two. + */ + mcam_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]); + mcam_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]); + if (cam->nbufs > 2) { + mcam_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]); + mcam_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS); + } else + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + if (cam->chip_id == V4L2_IDENT_CAFE) + mcam_reg_write(cam, REG_UBAR, 0); /* 32 bits only */ +} + +/* + * Copy data out to user space in the vmalloc case + */ +static void mcam_frame_tasklet(unsigned long data) +{ + struct mcam_camera *cam = (struct mcam_camera *) data; + int i; + unsigned long flags; + struct mcam_vb_buffer *buf; + + spin_lock_irqsave(&cam->dev_lock, flags); + for (i = 0; i < cam->nbufs; i++) { + int bufno = cam->next_buf; + + if (cam->state != S_STREAMING || bufno < 0) + break; /* I/O got stopped */ + if (++(cam->next_buf) >= cam->nbufs) + cam->next_buf = 0; + if (!test_bit(bufno, &cam->flags)) + continue; + if (list_empty(&cam->buffers)) { + singles++; + break; /* Leave it valid, hope for better later */ + } + delivered++; + clear_bit(bufno, &cam->flags); + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, + queue); + list_del_init(&buf->queue); + /* + * Drop the lock during the big copy. This *should* be safe... + */ + spin_unlock_irqrestore(&cam->dev_lock, flags); + memcpy(vb2_plane_vaddr(&buf->vb_buf, 0), cam->dma_bufs[bufno], + cam->pix_format.sizeimage); + mcam_buffer_done(cam, bufno, &buf->vb_buf); + spin_lock_irqsave(&cam->dev_lock, flags); + } + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Make sure our allocated buffers are up to the task. + */ +static int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage) + mcam_free_dma_bufs(cam); + if (cam->nbufs == 0) + return mcam_alloc_dma_bufs(cam, 0); + return 0; +} + +static void mcam_vmalloc_done(struct mcam_camera *cam, int frame) +{ + tasklet_schedule(&cam->s_tasklet); +} + +#else /* MCAM_MODE_VMALLOC */ + +static inline int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + return 0; +} + +static inline void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + return; +} + +static inline int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + return 0; +} + + + +#endif /* MCAM_MODE_VMALLOC */ + + +#ifdef MCAM_MODE_DMA_CONTIG +/* ---------------------------------------------------------------------- */ +/* + * DMA-contiguous code. + */ +/* + * Set up a contiguous buffer for the given frame. Here also is where + * the underrun strategy is set: if there is no buffer available, reuse + * the buffer from the other BAR and set the CF_SINGLE_BUFFER flag to + * keep the interrupt handler from giving that buffer back to user + * space. In this way, we always have a buffer to DMA to and don't + * have to try to play games stopping and restarting the controller. + */ +static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf; + /* + * If there are no available buffers, go into single mode + */ + if (list_empty(&cam->buffers)) { + buf = cam->vb_bufs[frame ^ 0x1]; + cam->vb_bufs[frame] = buf; + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, + vb2_dma_contig_plane_paddr(&buf->vb_buf, 0)); + set_bit(CF_SINGLE_BUFFER, &cam->flags); + singles++; + return; + } + /* + * OK, we have a buffer we can use. + */ + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); + list_del_init(&buf->queue); + mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR, + vb2_dma_contig_plane_paddr(&buf->vb_buf, 0)); + cam->vb_bufs[frame] = buf; + clear_bit(CF_SINGLE_BUFFER, &cam->flags); +} + +/* + * Initial B_DMA_contig setup. + */ +static void mcam_ctlr_dma_contig(struct mcam_camera *cam) +{ + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + cam->nbufs = 2; + mcam_set_contig_buffer(cam, 0); + mcam_set_contig_buffer(cam, 1); +} + +/* + * Frame completion handling. + */ +static void mcam_dma_contig_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[frame]; + + if (!test_bit(CF_SINGLE_BUFFER, &cam->flags)) { + delivered++; + mcam_buffer_done(cam, frame, &buf->vb_buf); + } + mcam_set_contig_buffer(cam, frame); +} + +#endif /* MCAM_MODE_DMA_CONTIG */ + +#ifdef MCAM_MODE_DMA_SG +/* ---------------------------------------------------------------------- */ +/* + * Scatter/gather-specific code. + */ + +/* + * Set up the next buffer for S/G I/O; caller should be sure that + * the controller is stopped and a buffer is available. + */ +static void mcam_sg_next_buffer(struct mcam_camera *cam) +{ + struct mcam_vb_buffer *buf; + + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); + list_del_init(&buf->queue); + mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa); + mcam_reg_write(cam, REG_DESC_LEN_Y, + buf->dma_desc_nent*sizeof(struct mcam_dma_desc)); + mcam_reg_write(cam, REG_DESC_LEN_U, 0); + mcam_reg_write(cam, REG_DESC_LEN_V, 0); + cam->vb_bufs[0] = buf; +} + +/* + * Initial B_DMA_sg setup + */ +static void mcam_ctlr_dma_sg(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD); + mcam_sg_next_buffer(cam); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); + cam->nbufs = 3; +} + + +/* + * Frame completion with S/G is trickier. We can't muck with + * a descriptor chain on the fly, since the controller buffers it + * internally. So we have to actually stop and restart; Marvell + * says this is the way to do it. + * + * Of course, stopping is easier said than done; experience shows + * that the controller can start a frame *after* C0_ENABLE has been + * cleared. So when running in S/G mode, the controller is "stopped" + * on receipt of the start-of-frame interrupt. That means we can + * safely change the DMA descriptor array here and restart things + * (assuming there's another buffer waiting to go). + */ +static void mcam_dma_sg_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[0]; + + /* + * Very Bad Not Good Things happen if you don't clear + * C1_DESC_ENA before making any descriptor changes. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); + /* + * If we have another buffer available, put it in and + * restart the engine. + */ + if (!list_empty(&cam->buffers)) { + mcam_sg_next_buffer(cam); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); + mcam_ctlr_start(cam); + /* + * Otherwise set CF_SG_RESTART and the controller will + * be restarted once another buffer shows up. + */ + } else { + set_bit(CF_SG_RESTART, &cam->flags); + singles++; + } + /* + * Now we can give the completed frame back to user space. + */ + delivered++; + mcam_buffer_done(cam, frame, &buf->vb_buf); +} + + +/* + * Scatter/gather mode requires stopping the controller between + * frames so we can put in a new DMA descriptor array. If no new + * buffer exists at frame completion, the controller is left stopped; + * this function is charged with gettig things going again. + */ +static void mcam_sg_restart(struct mcam_camera *cam) +{ + mcam_ctlr_dma_sg(cam); + mcam_ctlr_start(cam); + clear_bit(CF_SG_RESTART, &cam->flags); +} + +#else /* MCAM_MODE_DMA_SG */ + +static inline void mcam_sg_restart(struct mcam_camera *cam) +{ + return; +} + +#endif /* MCAM_MODE_DMA_SG */ + +/* ---------------------------------------------------------------------- */ +/* + * Buffer-mode-independent controller code. + */ + +/* + * Image format setup + */ +static void mcam_ctlr_image(struct mcam_camera *cam) +{ + int imgsz; + struct v4l2_pix_format *fmt = &cam->pix_format; + + imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) | + (fmt->bytesperline & IMGSZ_H_MASK); + mcam_reg_write(cam, REG_IMGSIZE, imgsz); + mcam_reg_write(cam, REG_IMGOFFSET, 0); + /* YPITCH just drops the last two bits */ + mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline, + IMGP_YP_MASK); + /* + * Tell the controller about the image format we are using. + */ + switch (cam->pix_format.pixelformat) { + case V4L2_PIX_FMT_YUYV: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV, + C0_DF_MASK); + break; + + case V4L2_PIX_FMT_RGB444: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB, + C0_DF_MASK); + /* Alpha value? */ + break; + + case V4L2_PIX_FMT_RGB565: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR, + C0_DF_MASK); + break; + + default: + cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat); + break; + } + /* + * Make sure it knows we want to use hsync/vsync. + */ + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, + C0_SIFM_MASK); +} + + +/* + * Configure the controller for operation; caller holds the + * device mutex. + */ +static int mcam_ctlr_configure(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cam->dma_setup(cam); + mcam_ctlr_image(cam); + mcam_set_config_needed(cam, 0); + clear_bit(CF_SG_RESTART, &cam->flags); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +static void mcam_ctlr_irq_enable(struct mcam_camera *cam) +{ + /* + * Clear any pending interrupts, since we do not + * expect to have I/O active prior to enabling. + */ + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); + mcam_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + +static void mcam_ctlr_irq_disable(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + + + +static void mcam_ctlr_init(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * Make sure it's not powered down. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + /* + * Turn off the enable bit. It sure should be off anyway, + * but it's good to be sure. + */ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); + /* + * Clock the sensor appropriately. Controller clock should + * be 48MHz, sensor "typical" value is half that. + */ + mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Stop the controller, and don't return until we're really sure that no + * further DMA is going on. + */ +static void mcam_ctlr_stop_dma(struct mcam_camera *cam) +{ + unsigned long flags; + + /* + * Theory: stop the camera controller (whether it is operating + * or not). Delay briefly just in case we race with the SOF + * interrupt, then wait until no DMA is active. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_SG_RESTART, &cam->flags); + mcam_ctlr_stop(cam); + cam->state = S_IDLE; + spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(40); + if (test_bit(CF_DMA_ACTIVE, &cam->flags)) + cam_err(cam, "Timeout waiting for DMA to end\n"); + /* This would be bad news - what now? */ + spin_lock_irqsave(&cam->dev_lock, flags); + mcam_ctlr_irq_disable(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* + * Power up and down. + */ +static void mcam_ctlr_power_up(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + cam->plat_power_up(cam); + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(5); /* Just to be sure */ +} + +static void mcam_ctlr_power_down(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * School of hard knocks department: be sure we do any register + * twiddling on the controller *before* calling the platform + * power down routine. + */ + mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); + cam->plat_power_down(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* -------------------------------------------------------------------- */ +/* + * Communications with the sensor. + */ + +static int __mcam_cam_reset(struct mcam_camera *cam) +{ + return sensor_call(cam, core, reset, 0); +} + +/* + * We have found the sensor on the i2c. Let's try to have a + * conversation. + */ +static int mcam_cam_init(struct mcam_camera *cam) +{ + struct v4l2_dbg_chip_ident chip; + int ret; + + mutex_lock(&cam->s_mutex); + if (cam->state != S_NOTREADY) + cam_warn(cam, "Cam init with device in funky state %d", + cam->state); + ret = __mcam_cam_reset(cam); + if (ret) + goto out; + chip.ident = V4L2_IDENT_NONE; + chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; + chip.match.addr = cam->sensor_addr; + ret = sensor_call(cam, core, g_chip_ident, &chip); + if (ret) + goto out; + cam->sensor_type = chip.ident; + if (cam->sensor_type != V4L2_IDENT_OV7670) { + cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type); + ret = -EINVAL; + goto out; + } +/* Get/set parameters? */ + ret = 0; + cam->state = S_IDLE; +out: + mcam_ctlr_power_down(cam); + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Configure the sensor to match the parameters we have. Caller should + * hold s_mutex + */ +static int mcam_cam_set_flip(struct mcam_camera *cam) +{ + struct v4l2_control ctrl; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.id = V4L2_CID_VFLIP; + ctrl.value = flip; + return sensor_call(cam, core, s_ctrl, &ctrl); +} + + +static int mcam_cam_configure(struct mcam_camera *cam) +{ + struct v4l2_mbus_framefmt mbus_fmt; + int ret; + + v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code); + ret = sensor_call(cam, core, init, 0); + if (ret == 0) + ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt); + /* + * OV7670 does weird things if flip is set *before* format... + */ + ret += mcam_cam_set_flip(cam); + return ret; +} + +/* + * Get everything ready, and start grabbing frames. + */ +static int mcam_read_setup(struct mcam_camera *cam) +{ + int ret; + unsigned long flags; + + /* + * Configuration. If we still don't have DMA buffers, + * make one last, desperate attempt. + */ + if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 && + mcam_alloc_dma_bufs(cam, 0)) + return -ENOMEM; + + if (mcam_needs_config(cam)) { + mcam_cam_configure(cam); + ret = mcam_ctlr_configure(cam); + if (ret) + return ret; + } + + /* + * Turn it loose. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + mcam_reset_buffers(cam); + mcam_ctlr_irq_enable(cam); + cam->state = S_STREAMING; + mcam_ctlr_start(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +/* ----------------------------------------------------------------------- */ +/* + * Videobuf2 interface code. + */ + +static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs, + unsigned int *num_planes, unsigned long sizes[], + void *alloc_ctxs[]) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2; + + sizes[0] = cam->pix_format.sizeimage; + *num_planes = 1; /* Someday we have to support planar formats... */ + if (*nbufs < minbufs) + *nbufs = minbufs; + if (cam->buffer_mode == B_DMA_contig) + alloc_ctxs[0] = cam->vb_alloc_ctx; + return 0; +} + + +static void mcam_vb_buf_queue(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + int start; + + spin_lock_irqsave(&cam->dev_lock, flags); + start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); + list_add(&mvb->queue, &cam->buffers); + if (test_bit(CF_SG_RESTART, &cam->flags)) + mcam_sg_restart(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + if (start) + mcam_read_setup(cam); +} + + +/* + * vb2 uses these to release the mutex when waiting in dqbuf. I'm + * not actually sure we need to do this (I'm not sure that vb2_dqbuf() needs + * to be called with the mutex held), but better safe than sorry. + */ +static void mcam_vb_wait_prepare(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + mutex_unlock(&cam->s_mutex); +} + +static void mcam_vb_wait_finish(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + mutex_lock(&cam->s_mutex); +} + +/* + * These need to be called with the mutex held from vb2 + */ +static int mcam_vb_start_streaming(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + if (cam->state != S_IDLE) + return -EINVAL; + cam->sequence = 0; + /* + * Videobuf2 sneakily hoards all the buffers and won't + * give them to us until *after* streaming starts. But + * we can't actually start streaming until we have a + * destination. So go into a wait state and hope they + * give us buffers soon. + */ + if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) { + cam->state = S_BUFWAIT; + return 0; + } + return mcam_read_setup(cam); +} + +static int mcam_vb_stop_streaming(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + unsigned long flags; + + if (cam->state == S_BUFWAIT) { + /* They never gave us buffers */ + cam->state = S_IDLE; + return 0; + } + if (cam->state != S_STREAMING) + return -EINVAL; + mcam_ctlr_stop_dma(cam); + /* + * VB2 reclaims the buffers, so we need to forget + * about them. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + INIT_LIST_HEAD(&cam->buffers); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + + +static const struct vb2_ops mcam_vb2_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_queue = mcam_vb_buf_queue, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = mcam_vb_wait_prepare, + .wait_finish = mcam_vb_wait_finish, +}; + + +#ifdef MCAM_MODE_DMA_SG +/* + * Scatter/gather mode uses all of the above functions plus a + * few extras to deal with DMA mapping. + */ +static int mcam_vb_sg_buf_init(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + mvb->dma_desc = dma_alloc_coherent(cam->dev, + ndesc * sizeof(struct mcam_dma_desc), + &mvb->dma_desc_pa, GFP_KERNEL); + if (mvb->dma_desc == NULL) { + cam_err(cam, "Unable to get DMA descriptor array\n"); + return -ENOMEM; + } + return 0; +} + +static int mcam_vb_sg_buf_prepare(struct vb2_buffer *vb) +{ + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0); + struct mcam_dma_desc *desc = mvb->dma_desc; + struct scatterlist *sg; + int i; + + mvb->dma_desc_nent = dma_map_sg(cam->dev, sgd->sglist, sgd->num_pages, + DMA_FROM_DEVICE); + if (mvb->dma_desc_nent <= 0) + return -EIO; /* Not sure what's right here */ + for_each_sg(sgd->sglist, sg, mvb->dma_desc_nent, i) { + desc->dma_addr = sg_dma_address(sg); + desc->segment_len = sg_dma_len(sg); + desc++; + } + return 0; +} + +static int mcam_vb_sg_buf_finish(struct vb2_buffer *vb) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0); + + dma_unmap_sg(cam->dev, sgd->sglist, sgd->num_pages, DMA_FROM_DEVICE); + return 0; +} + +static void mcam_vb_sg_buf_cleanup(struct vb2_buffer *vb) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct mcam_vb_buffer *mvb = vb_to_mvb(vb); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + dma_free_coherent(cam->dev, ndesc * sizeof(struct mcam_dma_desc), + mvb->dma_desc, mvb->dma_desc_pa); +} + + +static const struct vb2_ops mcam_vb2_sg_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_init = mcam_vb_sg_buf_init, + .buf_prepare = mcam_vb_sg_buf_prepare, + .buf_queue = mcam_vb_buf_queue, + .buf_finish = mcam_vb_sg_buf_finish, + .buf_cleanup = mcam_vb_sg_buf_cleanup, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = mcam_vb_wait_prepare, + .wait_finish = mcam_vb_wait_finish, +}; + +#endif /* MCAM_MODE_DMA_SG */ + +static int mcam_setup_vb2(struct mcam_camera *cam) +{ + struct vb2_queue *vq = &cam->vb_queue; + + memset(vq, 0, sizeof(*vq)); + vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vq->drv_priv = cam; + INIT_LIST_HEAD(&cam->buffers); + switch (cam->buffer_mode) { + case B_DMA_contig: +#ifdef MCAM_MODE_DMA_CONTIG + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_dma_contig_memops; + cam->vb_alloc_ctx = vb2_dma_contig_init_ctx(cam->dev); + vq->io_modes = VB2_MMAP | VB2_USERPTR; + cam->dma_setup = mcam_ctlr_dma_contig; + cam->frame_complete = mcam_dma_contig_done; +#endif + break; + case B_DMA_sg: +#ifdef MCAM_MODE_DMA_SG + vq->ops = &mcam_vb2_sg_ops; + vq->mem_ops = &vb2_dma_sg_memops; + vq->io_modes = VB2_MMAP | VB2_USERPTR; + cam->dma_setup = mcam_ctlr_dma_sg; + cam->frame_complete = mcam_dma_sg_done; +#endif + break; + case B_vmalloc: +#ifdef MCAM_MODE_VMALLOC + tasklet_init(&cam->s_tasklet, mcam_frame_tasklet, + (unsigned long) cam); + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_vmalloc_memops; + vq->buf_struct_size = sizeof(struct mcam_vb_buffer); + vq->io_modes = VB2_MMAP; + cam->dma_setup = mcam_ctlr_dma_vmalloc; + cam->frame_complete = mcam_vmalloc_done; +#endif + break; + } + return vb2_queue_init(vq); +} + +static void mcam_cleanup_vb2(struct mcam_camera *cam) +{ + vb2_queue_release(&cam->vb_queue); +#ifdef MCAM_MODE_DMA_CONTIG + if (cam->buffer_mode == B_DMA_contig) + vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx); +#endif +} + + +/* ---------------------------------------------------------------------- */ +/* + * The long list of V4L2 ioctl() operations. + */ + +static int mcam_vidioc_streamon(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_streamon(&cam->vb_queue, type); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_streamoff(struct file *filp, void *priv, + enum v4l2_buf_type type) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_streamoff(&cam->vb_queue, type); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_reqbufs(struct file *filp, void *priv, + struct v4l2_requestbuffers *req) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_reqbufs(&cam->vb_queue, req); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_querybuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_querybuf(&cam->vb_queue, buf); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_qbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_qbuf(&cam->vb_queue, buf); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_dqbuf(struct file *filp, void *priv, + struct v4l2_buffer *buf) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static int mcam_vidioc_queryctrl(struct file *filp, void *priv, + struct v4l2_queryctrl *qc) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, core, queryctrl, qc); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_g_ctrl(struct file *filp, void *priv, + struct v4l2_control *ctrl) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, core, g_ctrl, ctrl); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_s_ctrl(struct file *filp, void *priv, + struct v4l2_control *ctrl) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, core, s_ctrl, ctrl); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strcpy(cap->driver, "marvell_ccic"); + strcpy(cap->card, "marvell_ccic"); + cap->version = 1; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + return 0; +} + + +static int mcam_vidioc_enum_fmt_vid_cap(struct file *filp, + void *priv, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index >= N_MCAM_FMTS) + return -EINVAL; + strlcpy(fmt->description, mcam_formats[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = mcam_formats[fmt->index].pixelformat; + return 0; +} + +static int mcam_vidioc_try_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = priv; + struct mcam_format_struct *f; + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct v4l2_mbus_framefmt mbus_fmt; + int ret; + + f = mcam_find_format(pix->pixelformat); + pix->pixelformat = f->pixelformat; + v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code); + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt); + mutex_unlock(&cam->s_mutex); + v4l2_fill_pix_format(pix, &mbus_fmt); + pix->bytesperline = pix->width * f->bpp; + pix->sizeimage = pix->height * pix->bytesperline; + return ret; +} + +static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = priv; + struct mcam_format_struct *f; + int ret; + + /* + * Can't do anything if the device is not idle + * Also can't if there are streaming buffers in place. + */ + if (cam->state != S_IDLE || cam->vb_queue.num_buffers > 0) + return -EBUSY; + + f = mcam_find_format(fmt->fmt.pix.pixelformat); + + /* + * See if the formatting works in principle. + */ + ret = mcam_vidioc_try_fmt_vid_cap(filp, priv, fmt); + if (ret) + return ret; + /* + * Now we start to change things for real, so let's do it + * under lock. + */ + mutex_lock(&cam->s_mutex); + cam->pix_format = fmt->fmt.pix; + cam->mbus_code = f->mbus_code; + + /* + * Make sure we have appropriate DMA buffers. + */ + if (cam->buffer_mode == B_vmalloc) { + ret = mcam_check_dma_buffers(cam); + if (ret) + goto out; + } + mcam_set_config_needed(cam, 1); + ret = 0; +out: + mutex_unlock(&cam->s_mutex); + return ret; +} + +/* + * Return our stored notion of how the camera is/should be configured. + * The V4l2 spec wants us to be smarter, and actually get this from + * the camera (and not mess with it at open time). Someday. + */ +static int mcam_vidioc_g_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *f) +{ + struct mcam_camera *cam = priv; + + f->fmt.pix = cam->pix_format; + return 0; +} + +/* + * We only have one input - the sensor - so minimize the nonsense here. + */ +static int mcam_vidioc_enum_input(struct file *filp, void *priv, + struct v4l2_input *input) +{ + if (input->index != 0) + return -EINVAL; + + input->type = V4L2_INPUT_TYPE_CAMERA; + input->std = V4L2_STD_ALL; /* Not sure what should go here */ + strcpy(input->name, "Camera"); + return 0; +} + +static int mcam_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int mcam_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* from vivi.c */ +static int mcam_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a) +{ + return 0; +} + +/* + * G/S_PARM. Most of this is done by the sensor, but we are + * the level which controls the number of read buffers. + */ +static int mcam_vidioc_g_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, g_parm, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_s_parm(struct file *filp, void *priv, + struct v4l2_streamparm *parms) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, s_parm, parms); + mutex_unlock(&cam->s_mutex); + parms->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct mcam_camera *cam = priv; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (v4l2_chip_match_host(&chip->match)) { + chip->ident = cam->chip_id; + return 0; + } + return sensor_call(cam, core, g_chip_ident, chip); +} + +static int mcam_vidioc_enum_framesizes(struct file *filp, void *priv, + struct v4l2_frmsizeenum *sizes) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, enum_framesizes, sizes); + mutex_unlock(&cam->s_mutex); + return ret; +} + +static int mcam_vidioc_enum_frameintervals(struct file *filp, void *priv, + struct v4l2_frmivalenum *interval) +{ + struct mcam_camera *cam = priv; + int ret; + + mutex_lock(&cam->s_mutex); + ret = sensor_call(cam, video, enum_frameintervals, interval); + mutex_unlock(&cam->s_mutex); + return ret; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mcam_vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = priv; + + if (v4l2_chip_match_host(®->match)) { + reg->val = mcam_reg_read(cam, reg->reg); + reg->size = 4; + return 0; + } + return sensor_call(cam, core, g_register, reg); +} + +static int mcam_vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = priv; + + if (v4l2_chip_match_host(®->match)) { + mcam_reg_write(cam, reg->reg, reg->val); + return 0; + } + return sensor_call(cam, core, s_register, reg); +} +#endif + +static const struct v4l2_ioctl_ops mcam_v4l_ioctl_ops = { + .vidioc_querycap = mcam_vidioc_querycap, + .vidioc_enum_fmt_vid_cap = mcam_vidioc_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = mcam_vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = mcam_vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = mcam_vidioc_g_fmt_vid_cap, + .vidioc_enum_input = mcam_vidioc_enum_input, + .vidioc_g_input = mcam_vidioc_g_input, + .vidioc_s_input = mcam_vidioc_s_input, + .vidioc_s_std = mcam_vidioc_s_std, + .vidioc_reqbufs = mcam_vidioc_reqbufs, + .vidioc_querybuf = mcam_vidioc_querybuf, + .vidioc_qbuf = mcam_vidioc_qbuf, + .vidioc_dqbuf = mcam_vidioc_dqbuf, + .vidioc_streamon = mcam_vidioc_streamon, + .vidioc_streamoff = mcam_vidioc_streamoff, + .vidioc_queryctrl = mcam_vidioc_queryctrl, + .vidioc_g_ctrl = mcam_vidioc_g_ctrl, + .vidioc_s_ctrl = mcam_vidioc_s_ctrl, + .vidioc_g_parm = mcam_vidioc_g_parm, + .vidioc_s_parm = mcam_vidioc_s_parm, + .vidioc_enum_framesizes = mcam_vidioc_enum_framesizes, + .vidioc_enum_frameintervals = mcam_vidioc_enum_frameintervals, + .vidioc_g_chip_ident = mcam_vidioc_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = mcam_vidioc_g_register, + .vidioc_s_register = mcam_vidioc_s_register, +#endif +}; + +/* ---------------------------------------------------------------------- */ +/* + * Our various file operations. + */ +static int mcam_v4l_open(struct file *filp) +{ + struct mcam_camera *cam = video_drvdata(filp); + int ret = 0; + + filp->private_data = cam; + + frames = singles = delivered = 0; + mutex_lock(&cam->s_mutex); + if (cam->users == 0) { + ret = mcam_setup_vb2(cam); + if (ret) + goto out; + mcam_ctlr_power_up(cam); + __mcam_cam_reset(cam); + mcam_set_config_needed(cam, 1); + } + (cam->users)++; +out: + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_v4l_release(struct file *filp) +{ + struct mcam_camera *cam = filp->private_data; + + cam_err(cam, "Release, %d frames, %d singles, %d delivered\n", frames, + singles, delivered); + mutex_lock(&cam->s_mutex); + (cam->users)--; + if (filp == cam->owner) { + mcam_ctlr_stop_dma(cam); + cam->owner = NULL; + } + if (cam->users == 0) { + mcam_cleanup_vb2(cam); + mcam_ctlr_power_down(cam); + if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) + mcam_free_dma_bufs(cam); + } + mutex_unlock(&cam->s_mutex); + return 0; +} + +static ssize_t mcam_v4l_read(struct file *filp, + char __user *buffer, size_t len, loff_t *pos) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_read(&cam->vb_queue, buffer, len, pos, + filp->f_flags & O_NONBLOCK); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static unsigned int mcam_v4l_poll(struct file *filp, + struct poll_table_struct *pt) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_poll(&cam->vb_queue, filp, pt); + mutex_unlock(&cam->s_mutex); + return ret; +} + + +static int mcam_v4l_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct mcam_camera *cam = filp->private_data; + int ret; + + mutex_lock(&cam->s_mutex); + ret = vb2_mmap(&cam->vb_queue, vma); + mutex_unlock(&cam->s_mutex); + return ret; +} + + + +static const struct v4l2_file_operations mcam_v4l_fops = { + .owner = THIS_MODULE, + .open = mcam_v4l_open, + .release = mcam_v4l_release, + .read = mcam_v4l_read, + .poll = mcam_v4l_poll, + .mmap = mcam_v4l_mmap, + .unlocked_ioctl = video_ioctl2, +}; + + +/* + * This template device holds all of those v4l2 methods; we + * clone it for specific real devices. + */ +static struct video_device mcam_v4l_template = { + .name = "mcam", + .tvnorms = V4L2_STD_NTSC_M, + .current_norm = V4L2_STD_NTSC_M, /* make mplayer happy */ + + .fops = &mcam_v4l_fops, + .ioctl_ops = &mcam_v4l_ioctl_ops, + .release = video_device_release_empty, +}; + +/* ---------------------------------------------------------------------- */ +/* + * Interrupt handler stuff + */ +static void mcam_frame_complete(struct mcam_camera *cam, int frame) +{ + /* + * Basic frame housekeeping. + */ + set_bit(frame, &cam->flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + cam->next_buf = frame; + cam->buf_seq[frame] = ++(cam->sequence); + frames++; + /* + * "This should never happen" + */ + if (cam->state != S_STREAMING) + return; + /* + * Process the frame and set up the next one. + */ + cam->frame_complete(cam, frame); +} + + +/* + * The interrupt handler; this needs to be called from the + * platform irq handler with the lock held. + */ +int mccic_irq(struct mcam_camera *cam, unsigned int irqs) +{ + unsigned int frame, handled = 0; + + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */ + /* + * Handle any frame completions. There really should + * not be more than one of these, or we have fallen + * far behind. + * + * When running in S/G mode, the frame number lacks any + * real meaning - there's only one descriptor array - but + * the controller still picks a different one to signal + * each time. + */ + for (frame = 0; frame < cam->nbufs; frame++) + if (irqs & (IRQ_EOF0 << frame)) { + mcam_frame_complete(cam, frame); + handled = 1; + } + /* + * If a frame starts, note that we have DMA active. This + * code assumes that we won't get multiple frame interrupts + * at once; may want to rethink that. + */ + if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) { + set_bit(CF_DMA_ACTIVE, &cam->flags); + handled = 1; + if (cam->buffer_mode == B_DMA_sg) + mcam_ctlr_stop(cam); + } + return handled; +} + +/* ---------------------------------------------------------------------- */ +/* + * Registration and such. + */ +static struct ov7670_config sensor_cfg = { + /* + * Exclude QCIF mode, because it only captures a tiny portion + * of the sensor FOV + */ + .min_width = 320, + .min_height = 240, +}; + + +int mccic_register(struct mcam_camera *cam) +{ + struct i2c_board_info ov7670_info = { + .type = "ov7670", + .addr = 0x42 >> 1, + .platform_data = &sensor_cfg, + }; + int ret; + + /* + * Validate the requested buffer mode. + */ + if (buffer_mode >= 0) + cam->buffer_mode = buffer_mode; + if (cam->buffer_mode == B_DMA_sg && + cam->chip_id == V4L2_IDENT_CAFE) { + printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, " + "attempting vmalloc mode instead\n"); + cam->buffer_mode = B_vmalloc; + } + if (!mcam_buffer_mode_supported(cam->buffer_mode)) { + printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n", + cam->buffer_mode); + return -EINVAL; + } + /* + * Register with V4L + */ + ret = v4l2_device_register(cam->dev, &cam->v4l2_dev); + if (ret) + return ret; + + mutex_init(&cam->s_mutex); + cam->state = S_NOTREADY; + mcam_set_config_needed(cam, 1); + cam->pix_format = mcam_def_pix_format; + cam->mbus_code = mcam_def_mbus_code; + INIT_LIST_HEAD(&cam->buffers); + mcam_ctlr_init(cam); + + /* + * Try to find the sensor. + */ + sensor_cfg.clock_speed = cam->clock_speed; + sensor_cfg.use_smbus = cam->use_smbus; + cam->sensor_addr = ov7670_info.addr; + cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, + cam->i2c_adapter, &ov7670_info, NULL); + if (cam->sensor == NULL) { + ret = -ENODEV; + goto out_unregister; + } + + ret = mcam_cam_init(cam); + if (ret) + goto out_unregister; + /* + * Get the v4l2 setup done. + */ + mutex_lock(&cam->s_mutex); + cam->vdev = mcam_v4l_template; + cam->vdev.debug = 0; + cam->vdev.v4l2_dev = &cam->v4l2_dev; + ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1); + if (ret) + goto out; + video_set_drvdata(&cam->vdev, cam); + + /* + * If so requested, try to get our DMA buffers now. + */ + if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) { + if (mcam_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load" + " will try again later."); + } + +out: + mutex_unlock(&cam->s_mutex); + return ret; +out_unregister: + v4l2_device_unregister(&cam->v4l2_dev); + return ret; +} + + +void mccic_shutdown(struct mcam_camera *cam) +{ + /* + * If we have no users (and we really, really should have no + * users) the device will already be powered down. Trying to + * take it down again will wedge the machine, which is frowned + * upon. + */ + if (cam->users > 0) { + cam_warn(cam, "Removing a device with users!\n"); + mcam_ctlr_power_down(cam); + } + vb2_queue_release(&cam->vb_queue); + if (cam->buffer_mode == B_vmalloc) + mcam_free_dma_bufs(cam); + video_unregister_device(&cam->vdev); + v4l2_device_unregister(&cam->v4l2_dev); +} + +/* + * Power management + */ +#ifdef CONFIG_PM + +void mccic_suspend(struct mcam_camera *cam) +{ + enum mcam_state cstate = cam->state; + + mcam_ctlr_stop_dma(cam); + mcam_ctlr_power_down(cam); + cam->state = cstate; +} + +int mccic_resume(struct mcam_camera *cam) +{ + int ret = 0; + + mutex_lock(&cam->s_mutex); + if (cam->users > 0) { + mcam_ctlr_power_up(cam); + __mcam_cam_reset(cam); + } else { + mcam_ctlr_power_down(cam); + } + mutex_unlock(&cam->s_mutex); + + set_bit(CF_CONFIG_NEEDED, &cam->flags); + if (cam->state == S_STREAMING) + ret = mcam_read_setup(cam); + return ret; +} +#endif /* CONFIG_PM */ diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/video/marvell-ccic/mcam-core.h new file mode 100644 index 0000000..917200e --- /dev/null +++ b/drivers/media/video/marvell-ccic/mcam-core.h @@ -0,0 +1,323 @@ +/* + * Marvell camera core structures. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#ifndef _MCAM_CORE_H +#define _MCAM_CORE_H + +#include <linux/list.h> +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/videobuf2-core.h> + +/* + * Create our own symbols for the supported buffer modes, but, for now, + * base them entirely on which videobuf2 options have been selected. + */ +#if defined(CONFIG_VIDEOBUF2_VMALLOC) || defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE) +#define MCAM_MODE_VMALLOC 1 +#endif + +#if defined(CONFIG_VIDEOBUF2_DMA_CONTIG) || defined(CONFIG_VIDEOBUF2_DMA_CONTIG_MODULE) +#define MCAM_MODE_DMA_CONTIG 1 +#endif + +#if defined(CONFIG_VIDEOBUF2_DMA_SG) || defined(CONFIG_VIDEOBUF2_DMA_SG_MODULE) +#define MCAM_MODE_DMA_SG 1 +#endif + +#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \ + !defined(MCAM_MODE_DMA_SG) +#error One of the videobuf buffer modes must be selected in the config +#endif + + +enum mcam_state { + S_NOTREADY, /* Not yet initialized */ + S_IDLE, /* Just hanging around */ + S_FLAKED, /* Some sort of problem */ + S_STREAMING, /* Streaming data */ + S_BUFWAIT /* streaming requested but no buffers yet */ +}; +#define MAX_DMA_BUFS 3 + +/* + * Different platforms work best with different buffer modes, so we + * let the platform pick. + */ +enum mcam_buffer_mode { + B_vmalloc = 0, + B_DMA_contig = 1, + B_DMA_sg = 2 +}; + +/* + * Is a given buffer mode supported by the current kernel configuration? + */ +static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode) +{ + switch (mode) { +#ifdef MCAM_MODE_VMALLOC + case B_vmalloc: +#endif +#ifdef MCAM_MODE_DMA_CONTIG + case B_DMA_contig: +#endif +#ifdef MCAM_MODE_DMA_SG + case B_DMA_sg: +#endif + return 1; + default: + return 0; + } +} + + +/* + * A description of one of our devices. + * Locking: controlled by s_mutex. Certain fields, however, require + * the dev_lock spinlock; they are marked as such by comments. + * dev_lock is also required for access to device registers. + */ +struct mcam_camera { + /* + * These fields should be set by the platform code prior to + * calling mcam_register(). + */ + struct i2c_adapter *i2c_adapter; + unsigned char __iomem *regs; + spinlock_t dev_lock; + struct device *dev; /* For messages, dma alloc */ + unsigned int chip_id; + short int clock_speed; /* Sensor clock speed, default 30 */ + short int use_smbus; /* SMBUS or straight I2c? */ + enum mcam_buffer_mode buffer_mode; + /* + * Callbacks from the core to the platform code. + */ + void (*plat_power_up) (struct mcam_camera *cam); + void (*plat_power_down) (struct mcam_camera *cam); + + /* + * Everything below here is private to the mcam core and + * should not be touched by the platform code. + */ + struct v4l2_device v4l2_dev; + enum mcam_state state; + unsigned long flags; /* Buffer status, mainly (dev_lock) */ + int users; /* How many open FDs */ + struct file *owner; /* Who has data access (v4l2) */ + + /* + * Subsystem structures. + */ + struct video_device vdev; + struct v4l2_subdev *sensor; + unsigned short sensor_addr; + + /* Videobuf2 stuff */ + struct vb2_queue vb_queue; + struct list_head buffers; /* Available frames */ + + unsigned int nbufs; /* How many are alloc'd */ + int next_buf; /* Next to consume (dev_lock) */ + + /* DMA buffers - vmalloc mode */ +#ifdef MCAM_MODE_VMALLOC + unsigned int dma_buf_size; /* allocated size */ + void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ + dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ + struct tasklet_struct s_tasklet; +#endif + unsigned int sequence; /* Frame sequence number */ + unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */ + + /* DMA buffers - DMA modes */ + struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS]; + struct vb2_alloc_ctx *vb_alloc_ctx; + + /* Mode-specific ops, set at open time */ + void (*dma_setup)(struct mcam_camera *cam); + void (*frame_complete)(struct mcam_camera *cam, int frame); + + /* Current operating parameters */ + u32 sensor_type; /* Currently ov7670 only */ + struct v4l2_pix_format pix_format; + enum v4l2_mbus_pixelcode mbus_code; + + /* Locks */ + struct mutex s_mutex; /* Access to this structure */ +}; + + +/* + * Register I/O functions. These are here because the platform code + * may legitimately need to mess with the register space. + */ +/* + * Device register I/O + */ +static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg, + unsigned int val) +{ + iowrite32(val, cam->regs + reg); +} + +static inline unsigned int mcam_reg_read(struct mcam_camera *cam, + unsigned int reg) +{ + return ioread32(cam->regs + reg); +} + + +static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg, + unsigned int val, unsigned int mask) +{ + unsigned int v = mcam_reg_read(cam, reg); + + v = (v & ~mask) | (val & mask); + mcam_reg_write(cam, reg, v); +} + +static inline void mcam_reg_clear_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, 0, val); +} + +static inline void mcam_reg_set_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, val, val); +} + +/* + * Functions for use by platform code. + */ +int mccic_register(struct mcam_camera *cam); +int mccic_irq(struct mcam_camera *cam, unsigned int irqs); +void mccic_shutdown(struct mcam_camera *cam); +#ifdef CONFIG_PM +void mccic_suspend(struct mcam_camera *cam); +int mccic_resume(struct mcam_camera *cam); +#endif + +/* + * Register definitions for the m88alp01 camera interface. Offsets in bytes + * as given in the spec. + */ +#define REG_Y0BAR 0x00 +#define REG_Y1BAR 0x04 +#define REG_Y2BAR 0x08 +/* ... */ + +#define REG_IMGPITCH 0x24 /* Image pitch register */ +#define IMGP_YP_SHFT 2 /* Y pitch params */ +#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ +#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ +#define IMGP_UVP_MASK 0x3ffc0000 +#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ +#define IRQ_EOF0 0x00000001 /* End of frame 0 */ +#define IRQ_EOF1 0x00000002 /* End of frame 1 */ +#define IRQ_EOF2 0x00000004 /* End of frame 2 */ +#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ +#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ +#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ +#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ +#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ +#define IRQ_TWSIR 0x00020000 /* TWSI read */ +#define IRQ_TWSIE 0x00040000 /* TWSI error */ +#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) +#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) +#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) +#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ +#define REG_IRQSTAT 0x30 /* IRQ status / clear */ + +#define REG_IMGSIZE 0x34 /* Image size */ +#define IMGSZ_V_MASK 0x1fff0000 +#define IMGSZ_V_SHIFT 16 +#define IMGSZ_H_MASK 0x00003fff +#define REG_IMGOFFSET 0x38 /* IMage offset */ + +#define REG_CTRL0 0x3c /* Control 0 */ +#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ + +/* Mask for all the format bits */ +#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ + +/* RGB ordering */ +#define C0_RGB4_RGBX 0x00000000 +#define C0_RGB4_XRGB 0x00000004 +#define C0_RGB4_BGRX 0x00000008 +#define C0_RGB4_XBGR 0x0000000c +#define C0_RGB5_RGGB 0x00000000 +#define C0_RGB5_GRBG 0x00000004 +#define C0_RGB5_GBRG 0x00000008 +#define C0_RGB5_BGGR 0x0000000c + +/* Spec has two fields for DIN and DOUT, but they must match, so + combine them here. */ +#define C0_DF_YUV 0x00000000 /* Data is YUV */ +#define C0_DF_RGB 0x000000a0 /* ... RGB */ +#define C0_DF_BAYER 0x00000140 /* ... Bayer */ +/* 8-8-8 must be missing from the below - ask */ +#define C0_RGBF_565 0x00000000 +#define C0_RGBF_444 0x00000800 +#define C0_RGB_BGR 0x00001000 /* Blue comes first */ +#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ +#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ +#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ +/* Think that 420 packed must be 111 - ask */ +#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ +#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ +#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ +#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ +#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */ +#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */ +#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */ +#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */ +/* Bayer bits 18,19 if needed */ +#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ +#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ +#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ +#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ +#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ +#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ + +/* Bits below C1_444ALPHA are not present in Cafe */ +#define REG_CTRL1 0x40 /* Control 1 */ +#define C1_CLKGATE 0x00000001 /* Sensor clock gate */ +#define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */ +#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */ +#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ +#define C1_ALPHA_SHFT 20 +#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ +#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ +#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ +#define C1_DMAB_MASK 0x06000000 +#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ +#define C1_PWRDWN 0x10000000 /* Power down */ + +#define REG_CLKCTRL 0x88 /* Clock control */ +#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ + +/* This appears to be a Cafe-only register */ +#define REG_UBAR 0xc4 /* Upper base address register */ + +/* Armada 610 DMA descriptor registers */ +#define REG_DMA_DESC_Y 0x200 +#define REG_DMA_DESC_U 0x204 +#define REG_DMA_DESC_V 0x208 +#define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */ +#define REG_DESC_LEN_U 0x210 +#define REG_DESC_LEN_V 0x214 + +/* + * Useful stuff that probably belongs somewhere global. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +#endif /* _MCAM_CORE_H */ diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c new file mode 100644 index 0000000..d6b7645 --- /dev/null +++ b/drivers/media/video/marvell-ccic/mmp-driver.c @@ -0,0 +1,340 @@ +/* + * Support for the camera device found on Marvell MMP processors; known + * to work with the Armada 610 as used in the OLPC 1.75 system. + * + * Copyright 2011 Jonathan Corbet <corbet@lwn.net> + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/mmp-camera.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/list.h> + +#include "mcam-core.h" + +MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); +MODULE_LICENSE("GPL"); + +struct mmp_camera { + void *power_regs; + struct platform_device *pdev; + struct mcam_camera mcam; + struct list_head devlist; + int irq; +}; + +static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam) +{ + return container_of(mcam, struct mmp_camera, mcam); +} + +/* + * A silly little infrastructure so we can keep track of our devices. + * Chances are that we will never have more than one of them, but + * the Armada 610 *does* have two controllers... + */ + +static LIST_HEAD(mmpcam_devices); +static struct mutex mmpcam_devices_lock; + +static void mmpcam_add_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_add(&cam->devlist, &mmpcam_devices); + mutex_unlock(&mmpcam_devices_lock); +} + +static void mmpcam_remove_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_del(&cam->devlist); + mutex_unlock(&mmpcam_devices_lock); +} + +/* + * Platform dev remove passes us a platform_device, and there's + * no handy unused drvdata to stash a backpointer in. So just + * dig it out of our list. + */ +static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) +{ + struct mmp_camera *cam; + + mutex_lock(&mmpcam_devices_lock); + list_for_each_entry(cam, &mmpcam_devices, devlist) { + if (cam->pdev == pdev) { + mutex_unlock(&mmpcam_devices_lock); + return cam; + } + } + mutex_unlock(&mmpcam_devices_lock); + return NULL; +} + + + + +/* + * Power-related registers; this almost certainly belongs + * somewhere else. + * + * ARMADA 610 register manual, sec 7.2.1, p1842. + */ +#define CPU_SUBSYS_PMU_BASE 0xd4282800 +#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */ +#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */ + +/* + * Power control. + */ +static void mmpcam_power_up(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; +/* + * Turn on power and clocks to the controller. + */ + iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); + mdelay(1); +/* + * Provide power to the sensor. + */ + mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002); + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 1); + mdelay(5); + mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000); + gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */ + mdelay(5); + gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ + mdelay(5); +} + +static void mmpcam_power_down(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; +/* + * Turn off clocks and set reset lines + */ + iowrite32(0, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0, cam->power_regs + REG_CCIC_CRCR); +/* + * Shut down the sensor. + */ + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 0); + gpio_set_value(pdata->sensor_reset_gpio, 0); +} + + +static irqreturn_t mmpcam_irq(int irq, void *data) +{ + struct mcam_camera *mcam = data; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = mccic_irq(mcam, irqs); + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + + +static int mmpcam_probe(struct platform_device *pdev) +{ + struct mmp_camera *cam; + struct mcam_camera *mcam; + struct resource *res; + struct mmp_camera_platform_data *pdata; + int ret; + + cam = kzalloc(sizeof(*cam), GFP_KERNEL); + if (cam == NULL) + return -ENOMEM; + cam->pdev = pdev; + INIT_LIST_HEAD(&cam->devlist); + + mcam = &cam->mcam; + mcam->platform = MHP_Armada610; + mcam->plat_power_up = mmpcam_power_up; + mcam->plat_power_down = mmpcam_power_down; + mcam->dev = &pdev->dev; + mcam->use_smbus = 0; + mcam->chip_id = V4L2_IDENT_ARMADA610; + mcam->buffer_mode = B_DMA_sg; + spin_lock_init(&mcam->dev_lock); + /* + * Get our I/O memory. + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no iomem resource!\n"); + ret = -ENODEV; + goto out_free; + } + mcam->regs = ioremap(res->start, resource_size(res)); + if (mcam->regs == NULL) { + dev_err(&pdev->dev, "MMIO ioremap fail\n"); + ret = -ENODEV; + goto out_free; + } + /* + * Power/clock memory is elsewhere; get it too. Perhaps this + * should really be managed outside of this driver? + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res == NULL) { + dev_err(&pdev->dev, "no power resource!\n"); + ret = -ENODEV; + goto out_unmap1; + } + cam->power_regs = ioremap(res->start, resource_size(res)); + if (cam->power_regs == NULL) { + dev_err(&pdev->dev, "power MMIO ioremap fail\n"); + ret = -ENODEV; + goto out_unmap1; + } + /* + * Find the i2c adapter. This assumes, of course, that the + * i2c bus is already up and functioning. + */ + pdata = pdev->dev.platform_data; + mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); + if (mcam->i2c_adapter == NULL) { + ret = -ENODEV; + dev_err(&pdev->dev, "No i2c adapter\n"); + goto out_unmap2; + } + /* + * Sensor GPIO pins. + */ + ret = gpio_request(pdata->sensor_power_gpio, "cam-power"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor power gpio %d", + pdata->sensor_power_gpio); + goto out_unmap2; + } + gpio_direction_output(pdata->sensor_power_gpio, 0); + ret = gpio_request(pdata->sensor_reset_gpio, "cam-reset"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor reset gpio %d", + pdata->sensor_reset_gpio); + goto out_gpio; + } + gpio_direction_output(pdata->sensor_reset_gpio, 0); + /* + * Power the device up and hand it off to the core. + */ + mmpcam_power_up(mcam); + ret = mccic_register(mcam); + if (ret) + goto out_gpio2; + /* + * Finally, set up our IRQ now that the core is ready to + * deal with it. + */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + ret = -ENODEV; + goto out_unregister; + } + cam->irq = res->start; + ret = request_irq(cam->irq, mmpcam_irq, IRQF_SHARED, + "mmp-camera", mcam); + if (ret == 0) { + mmpcam_add_device(cam); + return 0; + } + +out_unregister: + mccic_shutdown(mcam); +out_gpio2: + mmpcam_power_down(mcam); + gpio_free(pdata->sensor_reset_gpio); +out_gpio: + gpio_free(pdata->sensor_power_gpio); +out_unmap2: + iounmap(cam->power_regs); +out_unmap1: + iounmap(mcam->regs); +out_free: + kfree(cam); + return ret; +} + + +static int mmpcam_remove(struct mmp_camera *cam) +{ + struct mcam_camera *mcam = &cam->mcam; + struct mmp_camera_platform_data *pdata; + + mmpcam_remove_device(cam); + free_irq(cam->irq, mcam); + mccic_shutdown(mcam); + mmpcam_power_down(mcam); + pdata = cam->pdev->dev.platform_data; + gpio_free(pdata->sensor_reset_gpio); + gpio_free(pdata->sensor_power_gpio); + iounmap(cam->power_regs); + iounmap(mcam->regs); + kfree(cam); + return 0; +} + +static int mmpcam_platform_remove(struct platform_device *pdev) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + if (cam == NULL) + return -ENODEV; + return mmpcam_remove(cam); +} + + +static struct platform_driver mmpcam_driver = { + .probe = mmpcam_probe, + .remove = mmpcam_platform_remove, + .driver = { + .name = "mmp-camera", + .owner = THIS_MODULE + } +}; + + +static int __init mmpcam_init_module(void) +{ + mutex_init(&mmpcam_devices_lock); + return platform_driver_register(&mmpcam_driver); +} + +static void __exit mmpcam_exit_module(void) +{ + platform_driver_unregister(&mmpcam_driver); + /* + * platform_driver_unregister() should have emptied the list + */ + if (!list_empty(&mmpcam_devices)) + printk(KERN_ERR "mmp_camera leaving devices behind\n"); +} + +module_init(mmpcam_init_module); +module_exit(mmpcam_exit_module); diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index b03d74e..166bf93 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -19,7 +19,6 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/fs.h> -#include <linux/version.h> #include <linux/timer.h> #include <linux/sched.h> #include <linux/slab.h> @@ -35,7 +34,7 @@ MODULE_DESCRIPTION("Virtual device for mem2mem framework testing"); MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>"); MODULE_LICENSE("GPL"); - +MODULE_VERSION("0.1.1"); #define MIN_W 32 #define MIN_H 32 @@ -380,7 +379,6 @@ static int vidioc_querycap(struct file *file, void *priv, strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1); strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1); cap->bus_info[0] = 0; - cap->version = KERNEL_VERSION(0, 1, 0); cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index e2bbd8c..4da9cca 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -603,13 +603,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd, unsigned long flags; int ret; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* Enable the chip */ data = reg_write(client, MT9M001_CHIP_ENABLE, 1); @@ -675,8 +671,8 @@ static void mt9m001_video_remove(struct soc_camera_device *icd) { struct soc_camera_link *icl = to_soc_camera_link(icd); - dev_dbg(&icd->dev, "Video removed: %p, %p\n", - icd->dev.parent, icd->vdev); + dev_dbg(icd->pdev, "Video removed: %p, %p\n", + icd->parent, icd->vdev); if (icl->free_bus) icl->free_bus(icl); } diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index ebebed9..a357aa8 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -63,6 +63,12 @@ #define MT9M111_RESET_RESTART_FRAME (1 << 1) #define MT9M111_RESET_RESET_MODE (1 << 0) +#define MT9M111_RM_FULL_POWER_RD (0 << 10) +#define MT9M111_RM_LOW_POWER_RD (1 << 10) +#define MT9M111_RM_COL_SKIP_4X (1 << 5) +#define MT9M111_RM_ROW_SKIP_4X (1 << 4) +#define MT9M111_RM_COL_SKIP_2X (1 << 3) +#define MT9M111_RM_ROW_SKIP_2X (1 << 2) #define MT9M111_RMB_MIRROR_COLS (1 << 1) #define MT9M111_RMB_MIRROR_ROWS (1 << 0) #define MT9M111_CTXT_CTRL_RESTART (1 << 15) @@ -95,7 +101,8 @@ #define MT9M111_OPMODE_AUTOEXPO_EN (1 << 14) #define MT9M111_OPMODE_AUTOWHITEBAL_EN (1 << 1) - +#define MT9M111_OUTFMT_FLIP_BAYER_COL (1 << 9) +#define MT9M111_OUTFMT_FLIP_BAYER_ROW (1 << 8) #define MT9M111_OUTFMT_PROCESSED_BAYER (1 << 14) #define MT9M111_OUTFMT_BYPASS_IFP (1 << 10) #define MT9M111_OUTFMT_INV_PIX_CLOCK (1 << 9) @@ -110,9 +117,8 @@ #define MT9M111_OUTFMT_TST_RAMP_FRAME (3 << 4) #define MT9M111_OUTFMT_SHIFT_3_UP (1 << 3) #define MT9M111_OUTFMT_AVG_CHROMA (1 << 2) -#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y (1 << 1) -#define MT9M111_OUTFMT_SWAP_RGB_EVEN (1 << 1) -#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr (1 << 0) +#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN (1 << 1) +#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B (1 << 0) /* * Camera control register addresses (0x200..0x2ff not implemented) @@ -122,6 +128,8 @@ #define reg_write(reg, val) mt9m111_reg_write(client, MT9M111_##reg, (val)) #define reg_set(reg, val) mt9m111_reg_set(client, MT9M111_##reg, (val)) #define reg_clear(reg, val) mt9m111_reg_clear(client, MT9M111_##reg, (val)) +#define reg_mask(reg, val, mask) mt9m111_reg_mask(client, MT9M111_##reg, \ + (val), (mask)) #define MT9M111_MIN_DARK_ROWS 8 #define MT9M111_MIN_DARK_COLS 26 @@ -153,7 +161,11 @@ static const struct mt9m111_datafmt mt9m111_colour_fmts[] = { {V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG}, {V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG}, {V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_BGR565_2X8_LE, V4L2_COLORSPACE_SRGB}, + {V4L2_MBUS_FMT_BGR565_2X8_BE, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, {V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB}, }; @@ -169,6 +181,8 @@ struct mt9m111 { * from v4l2-chip-ident.h */ enum mt9m111_context context; struct v4l2_rect rect; + struct mutex power_lock; /* lock to protect power_count */ + int power_count; const struct mt9m111_datafmt *fmt; unsigned int gain; unsigned char autoexposure; @@ -176,10 +190,6 @@ struct mt9m111 { unsigned int powered:1; unsigned int hflip:1; unsigned int vflip:1; - unsigned int swap_rgb_even_odd:1; - unsigned int swap_rgb_red_blue:1; - unsigned int swap_yuv_y_chromas:1; - unsigned int swap_yuv_cb_cr:1; unsigned int autowhitebalance:1; }; @@ -248,12 +258,26 @@ static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg, int ret; ret = mt9m111_reg_read(client, reg); - return mt9m111_reg_write(client, reg, ret & ~data); + if (ret >= 0) + ret = mt9m111_reg_write(client, reg, ret & ~data); + return ret; } -static int mt9m111_set_context(struct i2c_client *client, +static int mt9m111_reg_mask(struct i2c_client *client, const u16 reg, + const u16 data, const u16 mask) +{ + int ret; + + ret = mt9m111_reg_read(client, reg); + if (ret >= 0) + ret = mt9m111_reg_write(client, reg, (ret & ~mask) | data); + return ret; +} + +static int mt9m111_set_context(struct mt9m111 *mt9m111, enum mt9m111_context ctxt) { + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B | MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B | MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B @@ -267,10 +291,10 @@ static int mt9m111_set_context(struct i2c_client *client, return reg_write(CONTEXT_CONTROL, valA); } -static int mt9m111_setup_rect(struct i2c_client *client, +static int mt9m111_setup_rect(struct mt9m111 *mt9m111, struct v4l2_rect *rect) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret, is_raw_format; int width = rect->width; int height = rect->height; @@ -312,81 +336,9 @@ static int mt9m111_setup_rect(struct i2c_client *client, return ret; } -static int mt9m111_setup_pixfmt(struct i2c_client *client, u16 outfmt) +static int mt9m111_enable(struct mt9m111 *mt9m111) { - int ret; - u16 mask = MT9M111_OUTFMT_PROCESSED_BAYER | MT9M111_OUTFMT_RGB | - MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_SWAP_RGB_EVEN | - MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 | - MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr | - MT9M111_OUTFMT_SWAP_YCbCr_C_Y; - - ret = reg_read(OUTPUT_FORMAT_CTRL2_A); - if (ret >= 0) - ret = reg_write(OUTPUT_FORMAT_CTRL2_A, (ret & ~mask) | outfmt); - if (!ret) - ret = reg_read(OUTPUT_FORMAT_CTRL2_B); - if (ret >= 0) - ret = reg_write(OUTPUT_FORMAT_CTRL2_B, (ret & ~mask) | outfmt); - - return ret; -} - -static int mt9m111_setfmt_bayer8(struct i2c_client *client) -{ - return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_PROCESSED_BAYER | - MT9M111_OUTFMT_RGB); -} - -static int mt9m111_setfmt_bayer10(struct i2c_client *client) -{ - return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_BYPASS_IFP); -} - -static int mt9m111_setfmt_rgb565(struct i2c_client *client) -{ - struct mt9m111 *mt9m111 = to_mt9m111(client); - int val = 0; - - if (mt9m111->swap_rgb_red_blue) - val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; - if (mt9m111->swap_rgb_even_odd) - val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; - val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565; - - return mt9m111_setup_pixfmt(client, val); -} - -static int mt9m111_setfmt_rgb555(struct i2c_client *client) -{ - struct mt9m111 *mt9m111 = to_mt9m111(client); - int val = 0; - - if (mt9m111->swap_rgb_red_blue) - val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; - if (mt9m111->swap_rgb_even_odd) - val |= MT9M111_OUTFMT_SWAP_RGB_EVEN; - val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555; - - return mt9m111_setup_pixfmt(client, val); -} - -static int mt9m111_setfmt_yuv(struct i2c_client *client) -{ - struct mt9m111 *mt9m111 = to_mt9m111(client); - int val = 0; - - if (mt9m111->swap_yuv_cb_cr) - val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr; - if (mt9m111->swap_yuv_y_chromas) - val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y; - - return mt9m111_setup_pixfmt(client, val); -} - -static int mt9m111_enable(struct i2c_client *client) -{ - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE); @@ -395,8 +347,9 @@ static int mt9m111_enable(struct i2c_client *client) return ret; } -static int mt9m111_reset(struct i2c_client *client) +static int mt9m111_reset(struct mt9m111 *mt9m111) { + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; ret = reg_set(RESET, MT9M111_RESET_RESET_MODE); @@ -424,11 +377,9 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f) return 0; } -static int mt9m111_make_rect(struct i2c_client *client, +static int mt9m111_make_rect(struct mt9m111 *mt9m111, struct v4l2_rect *rect) { - struct mt9m111 *mt9m111 = to_mt9m111(client); - if (mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR8_1X8 || mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) { /* Bayer format - even size lengths */ @@ -444,14 +395,14 @@ static int mt9m111_make_rect(struct i2c_client *client, soc_camera_limit_side(&rect->top, &rect->height, MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT); - return mt9m111_setup_rect(client, rect); + return mt9m111_setup_rect(mt9m111, rect); } static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { struct v4l2_rect rect = a->c; struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); int ret; dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n", @@ -460,7 +411,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - ret = mt9m111_make_rect(client, &rect); + ret = mt9m111_make_rect(mt9m111, &rect); if (!ret) mt9m111->rect = rect; return ret; @@ -468,8 +419,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); a->c = mt9m111->rect; a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; @@ -496,8 +446,7 @@ static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) static int mt9m111_g_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); mf->width = mt9m111->rect.width; mf->height = mt9m111->rect.height; @@ -508,51 +457,73 @@ static int mt9m111_g_fmt(struct v4l2_subdev *sd, return 0; } -static int mt9m111_set_pixfmt(struct i2c_client *client, +static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111, enum v4l2_mbus_pixelcode code) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); + u16 data_outfmt2, mask_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER | + MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB | + MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 | + MT9M111_OUTFMT_RGB444x | MT9M111_OUTFMT_RGBx444 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; int ret; switch (code) { case V4L2_MBUS_FMT_SBGGR8_1X8: - ret = mt9m111_setfmt_bayer8(client); + data_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER | + MT9M111_OUTFMT_RGB; break; case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE: - ret = mt9m111_setfmt_bayer10(client); + data_outfmt2 = MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB; break; case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE: - ret = mt9m111_setfmt_rgb555(client); + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; + break; + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555; break; case V4L2_MBUS_FMT_RGB565_2X8_LE: - ret = mt9m111_setfmt_rgb565(client); + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; + break; + case V4L2_MBUS_FMT_RGB565_2X8_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565; + break; + case V4L2_MBUS_FMT_BGR565_2X8_BE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; + break; + case V4L2_MBUS_FMT_BGR565_2X8_LE: + data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 | + MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; break; case V4L2_MBUS_FMT_UYVY8_2X8: - mt9m111->swap_yuv_y_chromas = 0; - mt9m111->swap_yuv_cb_cr = 0; - ret = mt9m111_setfmt_yuv(client); + data_outfmt2 = 0; break; case V4L2_MBUS_FMT_VYUY8_2X8: - mt9m111->swap_yuv_y_chromas = 0; - mt9m111->swap_yuv_cb_cr = 1; - ret = mt9m111_setfmt_yuv(client); + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; break; case V4L2_MBUS_FMT_YUYV8_2X8: - mt9m111->swap_yuv_y_chromas = 1; - mt9m111->swap_yuv_cb_cr = 0; - ret = mt9m111_setfmt_yuv(client); + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN; break; case V4L2_MBUS_FMT_YVYU8_2X8: - mt9m111->swap_yuv_y_chromas = 1; - mt9m111->swap_yuv_cb_cr = 1; - ret = mt9m111_setfmt_yuv(client); + data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN | + MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B; break; default: - dev_err(&client->dev, "Pixel format not handled : %x\n", - code); - ret = -EINVAL; + dev_err(&client->dev, "Pixel format not handled: %x\n", code); + return -EINVAL; } + ret = reg_mask(OUTPUT_FORMAT_CTRL2_A, data_outfmt2, + mask_outfmt2); + if (!ret) + ret = reg_mask(OUTPUT_FORMAT_CTRL2_B, data_outfmt2, + mask_outfmt2); + return ret; } @@ -561,7 +532,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, { struct i2c_client *client = v4l2_get_subdevdata(sd); const struct mt9m111_datafmt *fmt; - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); struct v4l2_rect rect = { .left = mt9m111->rect.left, .top = mt9m111->rect.top, @@ -579,9 +550,9 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, "%s code=%x left=%d, top=%d, width=%d, height=%d\n", __func__, mf->code, rect.left, rect.top, rect.width, rect.height); - ret = mt9m111_make_rect(client, &rect); + ret = mt9m111_make_rect(mt9m111, &rect); if (!ret) - ret = mt9m111_set_pixfmt(client, mf->code); + ret = mt9m111_set_pixfmt(mt9m111, mf->code); if (!ret) { mt9m111->rect = rect; mt9m111->fmt = fmt; @@ -594,8 +565,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd, static int mt9m111_try_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); const struct mt9m111_datafmt *fmt; bool bayer = mf->code == V4L2_MBUS_FMT_SBGGR8_1X8 || mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE; @@ -635,7 +605,7 @@ static int mt9m111_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *id) { struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) return -EINVAL; @@ -726,21 +696,16 @@ static const struct v4l2_queryctrl mt9m111_controls[] = { } }; -static int mt9m111_resume(struct soc_camera_device *icd); -static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state); - static struct soc_camera_ops mt9m111_ops = { - .suspend = mt9m111_suspend, - .resume = mt9m111_resume, .query_bus_param = mt9m111_query_bus_param, .set_bus_param = mt9m111_set_bus_param, .controls = mt9m111_controls, .num_controls = ARRAY_SIZE(mt9m111_controls), }; -static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask) +static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; if (mt9m111->context == HIGHPOWER) { @@ -758,8 +723,9 @@ static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask) return ret; } -static int mt9m111_get_global_gain(struct i2c_client *client) +static int mt9m111_get_global_gain(struct mt9m111 *mt9m111) { + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int data; data = reg_read(GLOBAL_GAIN); @@ -769,9 +735,9 @@ static int mt9m111_get_global_gain(struct i2c_client *client) return data; } -static int mt9m111_set_global_gain(struct i2c_client *client, int gain) +static int mt9m111_set_global_gain(struct mt9m111 *mt9m111, int gain) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); u16 val; if (gain > 63 * 2 * 2) @@ -788,9 +754,9 @@ static int mt9m111_set_global_gain(struct i2c_client *client, int gain) return reg_write(GLOBAL_GAIN, val); } -static int mt9m111_set_autoexposure(struct i2c_client *client, int on) +static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int on) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; if (on) @@ -804,9 +770,9 @@ static int mt9m111_set_autoexposure(struct i2c_client *client, int on) return ret; } -static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on) +static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; if (on) @@ -823,7 +789,7 @@ static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on) static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); int data; switch (ctrl->id) { @@ -848,7 +814,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS); break; case V4L2_CID_GAIN: - data = mt9m111_get_global_gain(client); + data = mt9m111_get_global_gain(mt9m111); if (data < 0) return data; ctrl->value = data; @@ -865,8 +831,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); const struct v4l2_queryctrl *qctrl; int ret; @@ -877,22 +842,22 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) switch (ctrl->id) { case V4L2_CID_VFLIP: mt9m111->vflip = ctrl->value; - ret = mt9m111_set_flip(client, ctrl->value, + ret = mt9m111_set_flip(mt9m111, ctrl->value, MT9M111_RMB_MIRROR_ROWS); break; case V4L2_CID_HFLIP: mt9m111->hflip = ctrl->value; - ret = mt9m111_set_flip(client, ctrl->value, + ret = mt9m111_set_flip(mt9m111, ctrl->value, MT9M111_RMB_MIRROR_COLS); break; case V4L2_CID_GAIN: - ret = mt9m111_set_global_gain(client, ctrl->value); + ret = mt9m111_set_global_gain(mt9m111, ctrl->value); break; case V4L2_CID_EXPOSURE_AUTO: - ret = mt9m111_set_autoexposure(client, ctrl->value); + ret = mt9m111_set_autoexposure(mt9m111, ctrl->value); break; case V4L2_CID_AUTO_WHITE_BALANCE: - ret = mt9m111_set_autowhitebalance(client, ctrl->value); + ret = mt9m111_set_autowhitebalance(mt9m111, ctrl->value); break; default: ret = -EINVAL; @@ -901,60 +866,52 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) return ret; } -static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state) +static int mt9m111_suspend(struct mt9m111 *mt9m111) { - struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); - struct mt9m111 *mt9m111 = to_mt9m111(client); - - mt9m111->gain = mt9m111_get_global_gain(client); + mt9m111->gain = mt9m111_get_global_gain(mt9m111); return 0; } -static int mt9m111_restore_state(struct i2c_client *client) +static void mt9m111_restore_state(struct mt9m111 *mt9m111) { - struct mt9m111 *mt9m111 = to_mt9m111(client); - - mt9m111_set_context(client, mt9m111->context); - mt9m111_set_pixfmt(client, mt9m111->fmt->code); - mt9m111_setup_rect(client, &mt9m111->rect); - mt9m111_set_flip(client, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS); - mt9m111_set_flip(client, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS); - mt9m111_set_global_gain(client, mt9m111->gain); - mt9m111_set_autoexposure(client, mt9m111->autoexposure); - mt9m111_set_autowhitebalance(client, mt9m111->autowhitebalance); - return 0; + mt9m111_set_context(mt9m111, mt9m111->context); + mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code); + mt9m111_setup_rect(mt9m111, &mt9m111->rect); + mt9m111_set_flip(mt9m111, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS); + mt9m111_set_flip(mt9m111, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS); + mt9m111_set_global_gain(mt9m111, mt9m111->gain); + mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure); + mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance); } -static int mt9m111_resume(struct soc_camera_device *icd) +static int mt9m111_resume(struct mt9m111 *mt9m111) { - struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); - struct mt9m111 *mt9m111 = to_mt9m111(client); int ret = 0; if (mt9m111->powered) { - ret = mt9m111_enable(client); + ret = mt9m111_enable(mt9m111); if (!ret) - ret = mt9m111_reset(client); + ret = mt9m111_reset(mt9m111); if (!ret) - ret = mt9m111_restore_state(client); + mt9m111_restore_state(mt9m111); } return ret; } -static int mt9m111_init(struct i2c_client *client) +static int mt9m111_init(struct mt9m111 *mt9m111) { - struct mt9m111 *mt9m111 = to_mt9m111(client); + struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev); int ret; mt9m111->context = HIGHPOWER; - ret = mt9m111_enable(client); + ret = mt9m111_enable(mt9m111); if (!ret) - ret = mt9m111_reset(client); + ret = mt9m111_reset(mt9m111); if (!ret) - ret = mt9m111_set_context(client, mt9m111->context); + ret = mt9m111_set_context(mt9m111, mt9m111->context); if (!ret) - ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure); + ret = mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure); if (ret) dev_err(&client->dev, "mt9m111 init failed: %d\n", ret); return ret; @@ -971,20 +928,13 @@ static int mt9m111_video_probe(struct soc_camera_device *icd, s32 data; int ret; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); mt9m111->autoexposure = 1; mt9m111->autowhitebalance = 1; - mt9m111->swap_rgb_even_odd = 1; - mt9m111->swap_rgb_red_blue = 1; - data = reg_read(CHIP_VERSION); switch (data) { @@ -1005,16 +955,51 @@ static int mt9m111_video_probe(struct soc_camera_device *icd, goto ei2c; } - ret = mt9m111_init(client); + ret = mt9m111_init(mt9m111); ei2c: return ret; } +static int mt9m111_s_power(struct v4l2_subdev *sd, int on) +{ + struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = 0; + + mutex_lock(&mt9m111->power_lock); + + /* + * If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9m111->power_count == !on) { + if (on) { + ret = mt9m111_resume(mt9m111); + if (ret) { + dev_err(&client->dev, + "Failed to resume the sensor: %d\n", ret); + goto out; + } + } else { + mt9m111_suspend(mt9m111); + } + } + + /* Update the power count. */ + mt9m111->power_count += on ? 1 : -1; + WARN_ON(mt9m111->power_count < 0); + +out: + mutex_unlock(&mt9m111->power_lock); + return ret; +} + static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = { .g_ctrl = mt9m111_g_ctrl, .s_ctrl = mt9m111_s_ctrl, .g_chip_ident = mt9m111_g_chip_ident, + .s_power = mt9m111_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9m111_g_register, .s_register = mt9m111_s_register, diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index 7ce279c..30547cc 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -700,8 +700,7 @@ static int mt9t031_runtime_suspend(struct device *dev) static int mt9t031_runtime_resume(struct device *dev) { struct video_device *vdev = to_video_device(dev); - struct soc_camera_device *icd = container_of(vdev->parent, - struct soc_camera_device, dev); + struct soc_camera_device *icd = dev_get_drvdata(vdev->parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t031 *mt9t031 = to_mt9t031(client); diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index bffa9ee..d2e0a50 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -1057,13 +1057,9 @@ static int mt9t112_camera_probe(struct soc_camera_device *icd, const char *devname; int chipid; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * check and show chip ID diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 4904d25..893a8b8 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -54,11 +54,20 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Gain", .minimum = 0, - .maximum = (1 << 10) - 1, + .maximum = (1 << 12) - 1 - 0x0020, .step = 1, .default_value = 0x0020, .flags = 0, }, { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, + .maximum = 2047, + .step = 1, + .default_value = 0x01fc, + .flags = 0, + }, { .id = V4L2_CID_RED_BALANCE, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Red Balance", @@ -105,7 +114,8 @@ struct mt9v011 { unsigned hflip:1; unsigned vflip:1; - u16 global_gain, red_bal, blue_bal; + u16 global_gain, exposure; + s16 red_bal, blue_bal; }; static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd) @@ -180,24 +190,68 @@ static const struct i2c_reg_value mt9v011_init_default[] = { { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ }; + +static u16 calc_mt9v011_gain(s16 lineargain) +{ + + u16 digitalgain = 0; + u16 analogmult = 0; + u16 analoginit = 0; + + if (lineargain < 0) + lineargain = 0; + + /* recommended minimum */ + lineargain += 0x0020; + + if (lineargain > 2047) + lineargain = 2047; + + if (lineargain > 1023) { + digitalgain = 3; + analogmult = 3; + analoginit = lineargain / 16; + } else if (lineargain > 511) { + digitalgain = 1; + analogmult = 3; + analoginit = lineargain / 8; + } else if (lineargain > 255) { + analogmult = 3; + analoginit = lineargain / 4; + } else if (lineargain > 127) { + analogmult = 1; + analoginit = lineargain / 2; + } else + analoginit = lineargain; + + return analoginit + (analogmult << 7) + (digitalgain << 9); + +} + static void set_balance(struct v4l2_subdev *sd) { struct mt9v011 *core = to_mt9v011(sd); - u16 green1_gain, green2_gain, blue_gain, red_gain; + u16 green_gain, blue_gain, red_gain; + u16 exposure; + s16 bal; - green1_gain = core->global_gain; - green2_gain = core->global_gain; + exposure = core->exposure; - blue_gain = core->global_gain + - core->global_gain * core->blue_bal / (1 << 9); + green_gain = calc_mt9v011_gain(core->global_gain); - red_gain = core->global_gain + - core->global_gain * core->blue_bal / (1 << 9); + bal = core->global_gain; + bal += (core->blue_bal * core->global_gain / (1 << 7)); + blue_gain = calc_mt9v011_gain(bal); - mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain); - mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain); + bal = core->global_gain; + bal += (core->red_bal * core->global_gain / (1 << 7)); + red_gain = calc_mt9v011_gain(bal); + + mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain); + mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain); mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain); mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); + mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure); } static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator) @@ -286,7 +340,7 @@ static void set_res(struct v4l2_subdev *sd) * be missing. */ - hstart = 14 + (640 - core->width) / 2; + hstart = 20 + (640 - core->width) / 2; mt9v011_write(sd, R02_MT9V011_COLSTART, hstart); mt9v011_write(sd, R04_MT9V011_WIDTH, core->width); mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width); @@ -338,6 +392,9 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) case V4L2_CID_GAIN: ctrl->value = core->global_gain; return 0; + case V4L2_CID_EXPOSURE: + ctrl->value = core->exposure; + return 0; case V4L2_CID_RED_BALANCE: ctrl->value = core->red_bal; return 0; @@ -392,6 +449,9 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) case V4L2_CID_GAIN: core->global_gain = ctrl->value; break; + case V4L2_CID_EXPOSURE: + core->exposure = ctrl->value; + break; case V4L2_CID_RED_BALANCE: core->red_bal = ctrl->value; break; @@ -598,6 +658,7 @@ static int mt9v011_probe(struct i2c_client *c, } core->global_gain = 0x0024; + core->exposure = 0x01fc; core->width = 640; core->height = 480; core->xtal = 27000000; /* Hz */ diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index fc76ed1..51b0fcc 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -728,9 +728,9 @@ static int mt9v022_video_probe(struct soc_camera_device *icd, int ret; unsigned long flags; - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* Read out the chip version register */ data = reg_read(client, MT9V022_CHIP_VERSION); @@ -809,8 +809,8 @@ static void mt9v022_video_remove(struct soc_camera_device *icd) { struct soc_camera_link *icl = to_soc_camera_link(icd); - dev_dbg(&icd->dev, "Video removed: %p, %p\n", - icd->dev.parent, icd->vdev); + dev_dbg(icd->pdev, "Video removed: %p, %p\n", + icd->parent, icd->vdev); if (icl->free_bus) icl->free_bus(icl); } diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c index 1319c2c..c64e1dc 100644 --- a/drivers/media/video/mt9v032.c +++ b/drivers/media/video/mt9v032.c @@ -31,14 +31,14 @@ #define MT9V032_CHIP_VERSION 0x00 #define MT9V032_CHIP_ID_REV1 0x1311 #define MT9V032_CHIP_ID_REV3 0x1313 -#define MT9V032_ROW_START 0x01 -#define MT9V032_ROW_START_MIN 4 -#define MT9V032_ROW_START_DEF 10 -#define MT9V032_ROW_START_MAX 482 -#define MT9V032_COLUMN_START 0x02 +#define MT9V032_COLUMN_START 0x01 #define MT9V032_COLUMN_START_MIN 1 -#define MT9V032_COLUMN_START_DEF 2 +#define MT9V032_COLUMN_START_DEF 1 #define MT9V032_COLUMN_START_MAX 752 +#define MT9V032_ROW_START 0x02 +#define MT9V032_ROW_START_MIN 4 +#define MT9V032_ROW_START_DEF 5 +#define MT9V032_ROW_START_MAX 482 #define MT9V032_WINDOW_HEIGHT 0x03 #define MT9V032_WINDOW_HEIGHT_MIN 1 #define MT9V032_WINDOW_HEIGHT_DEF 480 @@ -420,13 +420,13 @@ static int mt9v032_set_crop(struct v4l2_subdev *subdev, struct v4l2_rect *__crop; struct v4l2_rect rect; - /* Clamp the crop rectangle boundaries and align them to a multiple of 2 - * pixels. + /* Clamp the crop rectangle boundaries and align them to a non multiple + * of 2 pixels to ensure a GRBG Bayer pattern. */ - rect.left = clamp(ALIGN(crop->rect.left, 2), + rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1, MT9V032_COLUMN_START_MIN, MT9V032_COLUMN_START_MAX); - rect.top = clamp(ALIGN(crop->rect.top, 2), + rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1, MT9V032_ROW_START_MIN, MT9V032_ROW_START_MAX); rect.width = clamp(ALIGN(crop->rect.width, 2), diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 63f8a0c..087db12 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -31,7 +31,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/time.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <media/soc_camera.h> @@ -73,7 +72,7 @@ #define CSISR_SOF_INT (1 << 16) #define CSISR_DRDY (1 << 0) -#define VERSION_CODE KERNEL_VERSION(0, 0, 1) +#define DRIVER_VERSION "0.0.2" #define DRIVER_NAME "mx1-camera" #define CSI_IRQ_MASK (CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \ @@ -142,7 +141,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; - dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size); return 0; } @@ -154,7 +153,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf) BUG_ON(in_interrupt()); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); /* @@ -179,7 +178,7 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq, if (bytes_per_line < 0) return bytes_per_line; - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); /* Added list head initialization on alloc */ @@ -232,7 +231,7 @@ out: static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev) { struct videobuf_buffer *vbuf = &pcdev->active->vb; - struct device *dev = pcdev->icd->dev.parent; + struct device *dev = pcdev->icd->parent; int ret; if (unlikely(!pcdev->active)) { @@ -256,11 +255,11 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx1_camera_dev *pcdev = ici->priv; struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); list_add_tail(&vb->queue, &pcdev->capture); @@ -287,7 +286,7 @@ static void mx1_videobuf_release(struct videobuf_queue *vq, struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); #ifdef DEBUG struct soc_camera_device *icd = vq->priv_data; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); @@ -343,7 +342,7 @@ static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev, static void mx1_camera_dma_irq(int channel, void *data) { struct mx1_camera_dev *pcdev = data; - struct device *dev = pcdev->icd->dev.parent; + struct device *dev = pcdev->icd->parent; struct mx1_buffer *buf; struct videobuf_buffer *vb; unsigned long flags; @@ -378,10 +377,10 @@ static struct videobuf_queue_ops mx1_videobuf_ops = { static void mx1_camera_init_videobuf(struct videobuf_queue *q, struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx1_camera_dev *pcdev = ici->priv; - videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent, + videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->parent, &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, sizeof(struct mx1_buffer), icd, &icd->video_lock); @@ -401,7 +400,7 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev) */ div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1; - dev_dbg(pcdev->icd->dev.parent, + dev_dbg(pcdev->icd->parent, "System clock %lukHz, target freq %dkHz, divisor %lu\n", lcdclk / 1000, mclk / 1000, div); @@ -412,7 +411,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev) { unsigned int csicr1 = CSICR1_EN; - dev_dbg(pcdev->icd->dev.parent, "Activate device\n"); + dev_dbg(pcdev->icd->parent, "Activate device\n"); clk_enable(pcdev->clk); @@ -428,7 +427,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev) static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev) { - dev_dbg(pcdev->icd->dev.parent, "Deactivate device\n"); + dev_dbg(pcdev->icd->parent, "Deactivate device\n"); /* Disable all CSI interface */ __raw_writel(0x00, pcdev->base + CSICR1); @@ -442,13 +441,13 @@ static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev) */ static int mx1_camera_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx1_camera_dev *pcdev = ici->priv; if (pcdev->icd) return -EBUSY; - dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n", + dev_info(icd->parent, "MX1 Camera driver attached to camera %d\n", icd->devnum); mx1_camera_activate(pcdev); @@ -460,7 +459,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd) static void mx1_camera_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx1_camera_dev *pcdev = ici->priv; unsigned int csicr1; @@ -473,7 +472,7 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd) /* Stop DMA engine */ imx_dma_disable(pcdev->dma_chan); - dev_info(icd->dev.parent, "MX1 Camera driver detached from camera %d\n", + dev_info(icd->parent, "MX1 Camera driver detached from camera %d\n", icd->devnum); mx1_camera_deactivate(pcdev); @@ -491,7 +490,7 @@ static int mx1_camera_set_crop(struct soc_camera_device *icd, static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx1_camera_dev *pcdev = ici->priv; unsigned long camera_flags, common_flags; unsigned int csicr1; @@ -562,14 +561,14 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", + dev_warn(icd->parent, "Format %x not found\n", pix->pixelformat); return -EINVAL; } buswidth = xlate->host_fmt->bits_per_sample; if (buswidth > 8) { - dev_warn(icd->dev.parent, + dev_warn(icd->parent, "bits-per-sample %d for format %x unsupported\n", buswidth, pix->pixelformat); return -EINVAL; @@ -609,7 +608,7 @@ static int mx1_camera_try_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", + dev_warn(icd->parent, "Format %x not found\n", pix->pixelformat); return -EINVAL; } @@ -676,7 +675,6 @@ static int mx1_camera_querycap(struct soc_camera_host *ici, { /* cap->name is set by the friendly caller:-> */ strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card)); - cap->version = VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; @@ -883,4 +881,5 @@ module_exit(mx1_camera_exit); MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver"); MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>"); MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRIVER_VERSION); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 4eab1c6..ec2410c 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -23,7 +23,6 @@ #include <linux/mm.h> #include <linux/moduleparam.h> #include <linux/time.h> -#include <linux/version.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/mutex.h> @@ -47,7 +46,7 @@ #include <asm/dma.h> #define MX2_CAM_DRV_NAME "mx2-camera" -#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) +#define MX2_CAM_VERSION "0.0.6" #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera" /* reset values */ @@ -278,7 +277,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev) */ static int mx2_camera_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; int ret; u32 csicr1; @@ -303,7 +302,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) pcdev->icd = icd; - dev_info(icd->dev.parent, "Camera driver attached to camera %d\n", + dev_info(icd->parent, "Camera driver attached to camera %d\n", icd->devnum); return 0; @@ -311,12 +310,12 @@ static int mx2_camera_add_device(struct soc_camera_device *icd) static void mx2_camera_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; BUG_ON(icd != pcdev->icd); - dev_info(icd->dev.parent, "Camera driver detached from camera %d\n", + dev_info(icd->parent, "Camera driver detached from camera %d\n", icd->devnum); mx2_camera_deactivate(pcdev); @@ -437,7 +436,7 @@ static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size); if (bytes_per_line < 0) return bytes_per_line; @@ -457,7 +456,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) struct soc_camera_device *icd = vq->priv_data; struct videobuf_buffer *vb = &buf->vb; - dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); /* @@ -467,7 +466,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf) videobuf_waiton(vq, vb, 0, 0); videobuf_dma_contig_free(vq, vb); - dev_dbg(&icd->dev, "%s freed\n", __func__); + dev_dbg(icd->parent, "%s freed\n", __func__); vb->state = VIDEOBUF_NEEDS_INIT; } @@ -481,7 +480,7 @@ static int mx2_videobuf_prepare(struct videobuf_queue *vq, icd->current_fmt->host_fmt); int ret = 0; - dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); if (bytes_per_line < 0) @@ -533,12 +532,12 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq, { struct soc_camera_device *icd = vq->priv_data; struct soc_camera_host *ici = - to_soc_camera_host(icd->dev.parent); + to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; - dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); spin_lock_irqsave(&pcdev->lock, flags); @@ -611,27 +610,27 @@ static void mx2_videobuf_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb); unsigned long flags; #ifdef DEBUG - dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); switch (vb->state) { case VIDEOBUF_ACTIVE: - dev_info(&icd->dev, "%s (active)\n", __func__); + dev_info(icd->parent, "%s (active)\n", __func__); break; case VIDEOBUF_QUEUED: - dev_info(&icd->dev, "%s (queued)\n", __func__); + dev_info(icd->parent, "%s (queued)\n", __func__); break; case VIDEOBUF_PREPARED: - dev_info(&icd->dev, "%s (prepared)\n", __func__); + dev_info(icd->parent, "%s (prepared)\n", __func__); break; default: - dev_info(&icd->dev, "%s (unknown) %d\n", __func__, + dev_info(icd->parent, "%s (unknown) %d\n", __func__, vb->state); break; } @@ -678,7 +677,7 @@ static struct videobuf_queue_ops mx2_videobuf_ops = { static void mx2_camera_init_videobuf(struct videobuf_queue *q, struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev, @@ -719,7 +718,7 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd, int bytesperline) { struct soc_camera_host *ici = - to_soc_camera_host(icd->dev.parent); + to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; writel(pcdev->discard_buffer_dma, @@ -772,7 +771,7 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { struct soc_camera_host *ici = - to_soc_camera_host(icd->dev.parent); + to_soc_camera_host(icd->parent); struct mx2_camera_dev *pcdev = ici->priv; unsigned long camera_flags, common_flags; int ret = 0; @@ -891,7 +890,7 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd, if (ret < 0) return ret; - dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", + dev_dbg(icd->parent, "Sensor cropped %dx%d\n", mf.width, mf.height); icd->user_width = mf.width; @@ -911,7 +910,7 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", + dev_warn(icd->parent, "Format %x not found\n", pix->pixelformat); return -EINVAL; } @@ -951,7 +950,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (pixfmt && !xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + dev_warn(icd->parent, "Format %x not found\n", pixfmt); return -EINVAL; } @@ -974,11 +973,16 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, if (pix->bytesperline < 0) return pix->bytesperline; pix->sizeimage = pix->height * pix->bytesperline; - if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */ - dev_warn(icd->dev.parent, - "Image size (%u) above limit\n", - pix->sizeimage); - return -EINVAL; + /* Check against the CSIRXCNT limit */ + if (pix->sizeimage > 4 * 0x3ffff) { + /* Adjust geometry, preserve aspect ratio */ + unsigned int new_height = int_sqrt(4 * 0x3ffff * + pix->height / pix->bytesperline); + pix->width = new_height * pix->width / pix->height; + pix->height = new_height; + pix->bytesperline = soc_mbus_bytes_per_line(pix->width, + xlate->host_fmt); + BUG_ON(pix->bytesperline < 0); } } @@ -996,7 +1000,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd, if (mf.field == V4L2_FIELD_ANY) mf.field = V4L2_FIELD_NONE; if (mf.field != V4L2_FIELD_NONE) { - dev_err(icd->dev.parent, "Field type %d unsupported.\n", + dev_err(icd->parent, "Field type %d unsupported.\n", mf.field); return -EINVAL; } @@ -1014,7 +1018,6 @@ static int mx2_camera_querycap(struct soc_camera_host *ici, { /* cap->name is set by the friendly caller:-> */ strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card)); - cap->version = MX2_CAM_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; @@ -1523,3 +1526,4 @@ module_exit(mx2_camera_exit); MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver"); MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>"); MODULE_LICENSE("GPL"); +MODULE_VERSION(MX2_CAM_VERSION); diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index c7680eb..c045b47 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/platform_device.h> #include <linux/clk.h> @@ -195,7 +194,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq, unsigned long sizes[], void *alloc_ctxs[]) { struct soc_camera_device *icd = soc_camera_from_vb2q(vq); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); @@ -224,7 +223,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq, static int mx3_videobuf_prepare(struct vb2_buffer *vb) { struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; struct scatterlist *sg; @@ -242,7 +241,7 @@ static int mx3_videobuf_prepare(struct vb2_buffer *vb) new_size = bytes_per_line * icd->user_height; if (vb2_plane_size(vb, 0) < new_size) { - dev_err(icd->dev.parent, "Buffer too small (%lu < %zu)\n", + dev_err(icd->parent, "Buffer too small (%lu < %zu)\n", vb2_plane_size(vb, 0), new_size); return -ENOBUFS; } @@ -284,7 +283,7 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc) static void mx3_videobuf_queue(struct vb2_buffer *vb) { struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct mx3_camera_buffer *buf = to_mx3_vb(vb); struct dma_async_tx_descriptor *txd = buf->txd; @@ -337,7 +336,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) spin_unlock_irq(&mx3_cam->lock); cookie = txd->tx_submit(txd); - dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n", + dev_dbg(icd->parent, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg)); if (cookie >= 0) @@ -358,13 +357,13 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb) static void mx3_videobuf_release(struct vb2_buffer *vb) { struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct mx3_camera_buffer *buf = to_mx3_vb(vb); struct dma_async_tx_descriptor *txd = buf->txd; unsigned long flags; - dev_dbg(icd->dev.parent, + dev_dbg(icd->parent, "Release%s DMA 0x%08x, queue %sempty\n", mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg), list_empty(&buf->queue) ? "" : "not "); @@ -403,7 +402,7 @@ static int mx3_videobuf_init(struct vb2_buffer *vb) static int mx3_stop_streaming(struct vb2_queue *q) { struct soc_camera_device *icd = soc_camera_from_vb2q(q); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; struct dma_chan *chan; @@ -499,7 +498,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam, clk_enable(mx3_cam->clk); rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk); - dev_dbg(icd->dev.parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate); + dev_dbg(icd->parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate); if (rate) clk_set_rate(mx3_cam->clk, rate); } @@ -507,7 +506,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam, /* Called with .video_lock held */ static int mx3_camera_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; if (mx3_cam->icd) @@ -517,7 +516,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd) mx3_cam->icd = icd; - dev_info(icd->dev.parent, "MX3 Camera driver attached to camera %d\n", + dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n", icd->devnum); return 0; @@ -526,7 +525,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd) /* Called with .video_lock held */ static void mx3_camera_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct idmac_channel **ichan = &mx3_cam->idmac_channel[0]; @@ -541,7 +540,7 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd) mx3_cam->icd = NULL; - dev_info(icd->dev.parent, "MX3 Camera driver detached from camera %d\n", + dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n", icd->devnum); } @@ -608,12 +607,12 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam, static int mx3_camera_try_bus_param(struct soc_camera_device *icd, const unsigned int depth) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; unsigned long bus_flags, camera_flags; int ret = test_platform_param(mx3_cam, depth, &bus_flags); - dev_dbg(icd->dev.parent, "request bus width %d bit: %d\n", depth, ret); + dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret); if (ret < 0) return ret; @@ -622,7 +621,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd, ret = soc_camera_bus_param_compatible(camera_flags, bus_flags); if (ret < 0) - dev_warn(icd->dev.parent, + dev_warn(icd->parent, "Flags incompatible: camera %lx, host %lx\n", camera_flags, bus_flags); @@ -676,7 +675,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id struct soc_camera_format_xlate *xlate) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; int formats = 0, ret; enum v4l2_mbus_pixelcode code; const struct soc_mbus_pixelfmt *fmt; @@ -688,7 +687,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id fmt = soc_mbus_get_fmtdesc(code); if (!fmt) { - dev_warn(icd->dev.parent, + dev_warn(icd->parent, "Unsupported format code #%u: %d\n", idx, code); return 0; } @@ -816,7 +815,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, struct v4l2_crop *a) { struct v4l2_rect *rect = &a->c; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_mbus_framefmt mf; @@ -849,7 +848,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, configure_geometry(mx3_cam, mf.width, mf.height, icd->current_fmt->host_fmt); - dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n", + dev_dbg(icd->parent, "Sensor cropped %dx%d\n", mf.width, mf.height); icd->user_width = mf.width; @@ -861,7 +860,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd, static int mx3_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; @@ -871,13 +870,13 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", + dev_warn(icd->parent, "Format %x not found\n", pix->pixelformat); return -EINVAL; } stride_align(&pix->width); - dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height); + dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height); /* * Might have to perform a complete interface initialisation like in @@ -913,13 +912,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd, pix->colorspace = mf.colorspace; icd->current_fmt = xlate; - pix->bytesperline = soc_mbus_bytes_per_line(pix->width, - xlate->host_fmt); - if (pix->bytesperline < 0) - return pix->bytesperline; - pix->sizeimage = pix->height * pix->bytesperline; - - dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height); + dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height); return ret; } @@ -936,7 +929,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (pixfmt && !xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + dev_warn(icd->parent, "Format %x not found\n", pixfmt); return -EINVAL; } @@ -946,12 +939,6 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd, if (pix->width > 4096) pix->width = 4096; - pix->bytesperline = soc_mbus_bytes_per_line(pix->width, - xlate->host_fmt); - if (pix->bytesperline < 0) - return pix->bytesperline; - pix->sizeimage = pix->height * pix->bytesperline; - /* limit to sensor capabilities */ mf.width = pix->width; mf.height = pix->height; @@ -974,7 +961,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd, case V4L2_FIELD_NONE: break; default: - dev_err(icd->dev.parent, "Field type %d unsupported.\n", + dev_err(icd->parent, "Field type %d unsupported.\n", mf.field); ret = -EINVAL; } @@ -1000,7 +987,6 @@ static int mx3_camera_querycap(struct soc_camera_host *ici, { /* cap->name is set by the firendly caller:-> */ strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card)); - cap->version = KERNEL_VERSION(0, 2, 2); cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; @@ -1008,7 +994,7 @@ static int mx3_camera_querycap(struct soc_camera_host *ici, static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; unsigned long bus_flags, camera_flags, common_flags; u32 dw, sens_conf; @@ -1016,7 +1002,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) int buswidth; int ret; const struct soc_camera_format_xlate *xlate; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code); if (!fmt) @@ -1325,4 +1311,5 @@ module_exit(mx3_camera_exit); MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver"); MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>"); MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.2.3"); MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME); diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig index e63233fd..390ab09 100644 --- a/drivers/media/video/omap/Kconfig +++ b/drivers/media/video/omap/Kconfig @@ -1,11 +1,14 @@ +config VIDEO_OMAP2_VOUT_VRFB + bool + config VIDEO_OMAP2_VOUT tristate "OMAP2/OMAP3 V4L2-Display driver" depends on ARCH_OMAP2 || ARCH_OMAP3 select VIDEOBUF_GEN select VIDEOBUF_DMA_CONTIG select OMAP2_DSS - select OMAP2_VRAM - select OMAP2_VRFB + select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 + select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB default n ---help--- V4L2 Display driver support for OMAP2/3 based boards. diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile index b2878807..fc410b4 100644 --- a/drivers/media/video/omap/Makefile +++ b/drivers/media/video/omap/Makefile @@ -4,4 +4,5 @@ # OMAP2/3 Display driver omap-vout-y := omap_vout.o omap_voutlib.o +omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index a647894..b5ef362 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -35,28 +35,26 @@ #include <linux/sched.h> #include <linux/types.h> #include <linux/platform_device.h> -#include <linux/dma-mapping.h> #include <linux/irq.h> #include <linux/videodev2.h> -#include <linux/slab.h> +#include <linux/dma-mapping.h> #include <media/videobuf-dma-contig.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <plat/dma.h> -#include <plat/vram.h> #include <plat/vrfb.h> #include <video/omapdss.h> #include "omap_voutlib.h" #include "omap_voutdef.h" +#include "omap_vout_vrfb.h" MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("OMAP Video for Linux Video out driver"); MODULE_LICENSE("GPL"); - /* Driver Configuration macros */ #define VOUT_NAME "omap_vout" @@ -65,31 +63,6 @@ enum omap_vout_channels { OMAP_VIDEO2, }; -enum dma_channel_state { - DMA_CHAN_NOT_ALLOTED, - DMA_CHAN_ALLOTED, -}; - -#define QQVGA_WIDTH 160 -#define QQVGA_HEIGHT 120 - -/* Max Resolution supported by the driver */ -#define VID_MAX_WIDTH 1280 /* Largest width */ -#define VID_MAX_HEIGHT 720 /* Largest height */ - -/* Mimimum requirement is 2x2 for DSS */ -#define VID_MIN_WIDTH 2 -#define VID_MIN_HEIGHT 2 - -/* 2048 x 2048 is max res supported by OMAP display controller */ -#define MAX_PIXELS_PER_LINE 2048 - -#define VRFB_TX_TIMEOUT 1000 -#define VRFB_NUM_BUFS 4 - -/* Max buffer size tobe allocated during init */ -#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4) - static struct videobuf_queue_ops video_vbq_ops; /* Variables configurable through module params*/ static u32 video1_numbuffers = 3; @@ -172,84 +145,6 @@ static const struct v4l2_fmtdesc omap_formats[] = { #define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats)) /* - * Allocate buffers - */ -static unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr) -{ - u32 order, size; - unsigned long virt_addr, addr; - - size = PAGE_ALIGN(buf_size); - order = get_order(size); - virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order); - addr = virt_addr; - - if (virt_addr) { - while (size > 0) { - SetPageReserved(virt_to_page(addr)); - addr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } - *phys_addr = (u32) virt_to_phys((void *) virt_addr); - return virt_addr; -} - -/* - * Free buffers - */ -static void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size) -{ - u32 order, size; - unsigned long addr = virtaddr; - - size = PAGE_ALIGN(buf_size); - order = get_order(size); - - while (size > 0) { - ClearPageReserved(virt_to_page(addr)); - addr += PAGE_SIZE; - size -= PAGE_SIZE; - } - free_pages((unsigned long) virtaddr, order); -} - -/* - * Function for allocating video buffers - */ -static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout, - unsigned int *count, int startindex) -{ - int i, j; - - for (i = 0; i < *count; i++) { - if (!vout->smsshado_virt_addr[i]) { - vout->smsshado_virt_addr[i] = - omap_vout_alloc_buffer(vout->smsshado_size, - &vout->smsshado_phy_addr[i]); - } - if (!vout->smsshado_virt_addr[i] && startindex != -1) { - if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex) - break; - } - if (!vout->smsshado_virt_addr[i]) { - for (j = 0; j < i; j++) { - omap_vout_free_buffer( - vout->smsshado_virt_addr[j], - vout->smsshado_size); - vout->smsshado_virt_addr[j] = 0; - vout->smsshado_phy_addr[j] = 0; - } - *count = 0; - return -ENOMEM; - } - memset((void *) vout->smsshado_virt_addr[i], 0, - vout->smsshado_size); - } - return 0; -} - -/* * Try format */ static int omap_vout_try_format(struct v4l2_pix_format *pix) @@ -342,73 +237,9 @@ static u32 omap_vout_uservirt_to_phys(u32 virtp) } /* - * Wakes up the application once the DMA transfer to VRFB space is completed. - */ -static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data) -{ - struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data; - - t->tx_status = 1; - wake_up_interruptible(&t->wait); -} - -/* - * Release the VRFB context once the module exits - */ -static void omap_vout_release_vrfb(struct omap_vout_device *vout) -{ - int i; - - for (i = 0; i < VRFB_NUM_BUFS; i++) - omap_vrfb_release_ctx(&vout->vrfb_context[i]); - - if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) { - vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; - omap_free_dma(vout->vrfb_dma_tx.dma_ch); - } -} - -/* - * Return true if rotation is 90 or 270 - */ -static inline int rotate_90_or_270(const struct omap_vout_device *vout) -{ - return (vout->rotation == dss_rotation_90_degree || - vout->rotation == dss_rotation_270_degree); -} - -/* - * Return true if rotation is enabled - */ -static inline int rotation_enabled(const struct omap_vout_device *vout) -{ - return vout->rotation || vout->mirror; -} - -/* - * Reverse the rotation degree if mirroring is enabled - */ -static inline int calc_rotation(const struct omap_vout_device *vout) -{ - if (!vout->mirror) - return vout->rotation; - - switch (vout->rotation) { - case dss_rotation_90_degree: - return dss_rotation_270_degree; - case dss_rotation_270_degree: - return dss_rotation_90_degree; - case dss_rotation_180_degree: - return dss_rotation_0_degree; - default: - return dss_rotation_180_degree; - } -} - -/* * Free the V4L2 buffers */ -static void omap_vout_free_buffers(struct omap_vout_device *vout) +void omap_vout_free_buffers(struct omap_vout_device *vout) { int i, numbuffers; @@ -425,52 +256,6 @@ static void omap_vout_free_buffers(struct omap_vout_device *vout) } /* - * Free VRFB buffers - */ -static void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) -{ - int j; - - for (j = 0; j < VRFB_NUM_BUFS; j++) { - omap_vout_free_buffer(vout->smsshado_virt_addr[j], - vout->smsshado_size); - vout->smsshado_virt_addr[j] = 0; - vout->smsshado_phy_addr[j] = 0; - } -} - -/* - * Allocate the buffers for the VRFB space. Data is copied from V4L2 - * buffers to the VRFB buffers using the DMA engine. - */ -static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, - unsigned int *count, unsigned int startindex) -{ - int i; - bool yuv_mode; - - /* Allocate the VRFB buffers only if the buffers are not - * allocated during init time. - */ - if ((rotation_enabled(vout)) && !vout->vrfb_static_allocation) - if (omap_vout_allocate_vrfb_buffers(vout, count, startindex)) - return -ENOMEM; - - if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 || - vout->dss_mode == OMAP_DSS_COLOR_UYVY) - yuv_mode = true; - else - yuv_mode = false; - - for (i = 0; i < *count; i++) - omap_vrfb_setup(&vout->vrfb_context[i], - vout->smsshado_phy_addr[i], vout->pix.width, - vout->pix.height, vout->bpp, yuv_mode); - - return 0; -} - -/* * Convert V4L2 rotation to DSS rotation * V4L2 understand 0, 90, 180, 270. * Convert to 0, 1, 2 and 3 respectively for DSS @@ -499,124 +284,38 @@ static int v4l2_rot_to_dss_rot(int v4l2_rotation, return ret; } -/* - * Calculate the buffer offsets from which the streaming should - * start. This offset calculation is mainly required because of - * the VRFB 32 pixels alignment with rotation. - */ static int omap_vout_calculate_offset(struct omap_vout_device *vout) { - struct omap_overlay *ovl; - enum dss_rotation rotation; struct omapvideo_info *ovid; - bool mirroring = vout->mirror; - struct omap_dss_device *cur_display; struct v4l2_rect *crop = &vout->crop; struct v4l2_pix_format *pix = &vout->pix; int *cropped_offset = &vout->cropped_offset; - int vr_ps = 1, ps = 2, temp_ps = 2; - int offset = 0, ctop = 0, cleft = 0, line_length = 0; + int ps = 2, line_length = 0; ovid = &vout->vid_info; - ovl = ovid->overlays[0]; - /* get the display device attached to the overlay */ - if (!ovl->manager || !ovl->manager->device) - return -1; - cur_display = ovl->manager->device; - rotation = calc_rotation(vout); + if (ovid->rotation_type == VOUT_ROT_VRFB) { + omap_vout_calculate_vrfb_offset(vout); + } else { + vout->line_length = line_length = pix->width; - if (V4L2_PIX_FMT_YUYV == pix->pixelformat || - V4L2_PIX_FMT_UYVY == pix->pixelformat) { - if (rotation_enabled(vout)) { - /* - * ps - Actual pixel size for YUYV/UYVY for - * VRFB/Mirroring is 4 bytes - * vr_ps - Virtually pixel size for YUYV/UYVY is - * 2 bytes - */ + if (V4L2_PIX_FMT_YUYV == pix->pixelformat || + V4L2_PIX_FMT_UYVY == pix->pixelformat) + ps = 2; + else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) ps = 4; - vr_ps = 2; - } else { - ps = 2; /* otherwise the pixel size is 2 byte */ - } - } else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) { - ps = 4; - } else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) { - ps = 3; - } - vout->ps = ps; - vout->vr_ps = vr_ps; - - if (rotation_enabled(vout)) { - line_length = MAX_PIXELS_PER_LINE; - ctop = (pix->height - crop->height) - crop->top; - cleft = (pix->width - crop->width) - crop->left; - } else { - line_length = pix->width; - } - vout->line_length = line_length; - switch (rotation) { - case dss_rotation_90_degree: - offset = vout->vrfb_context[0].yoffset * - vout->vrfb_context[0].bytespp; - temp_ps = ps / vr_ps; - if (mirroring == 0) { - *cropped_offset = offset + line_length * - temp_ps * cleft + crop->top * temp_ps; - } else { - *cropped_offset = offset + line_length * temp_ps * - cleft + crop->top * temp_ps + (line_length * - ((crop->width / (vr_ps)) - 1) * ps); - } - break; - case dss_rotation_180_degree: - offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset * - vout->vrfb_context[0].bytespp) + - (vout->vrfb_context[0].xoffset * - vout->vrfb_context[0].bytespp)); - if (mirroring == 0) { - *cropped_offset = offset + (line_length * ps * ctop) + - (cleft / vr_ps) * ps; + else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) + ps = 3; - } else { - *cropped_offset = offset + (line_length * ps * ctop) + - (cleft / vr_ps) * ps + (line_length * - (crop->height - 1) * ps); - } - break; - case dss_rotation_270_degree: - offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset * - vout->vrfb_context[0].bytespp; - temp_ps = ps / vr_ps; - if (mirroring == 0) { - *cropped_offset = offset + line_length * - temp_ps * crop->left + ctop * ps; - } else { - *cropped_offset = offset + line_length * - temp_ps * crop->left + ctop * ps + - (line_length * ((crop->width / vr_ps) - 1) * - ps); - } - break; - case dss_rotation_0_degree: - if (mirroring == 0) { - *cropped_offset = (line_length * ps) * - crop->top + (crop->left / vr_ps) * ps; - } else { - *cropped_offset = (line_length * ps) * - crop->top + (crop->left / vr_ps) * ps + - (line_length * (crop->height - 1) * ps); - } - break; - default: - *cropped_offset = (line_length * ps * crop->top) / - vr_ps + (crop->left * ps) / vr_ps + - ((crop->width / vr_ps) - 1) * ps; - break; + vout->ps = ps; + + *cropped_offset = (line_length * ps) * + crop->top + crop->left * ps; } + v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n", - __func__, *cropped_offset); + __func__, vout->cropped_offset); + return 0; } @@ -664,7 +363,7 @@ static int video_mode_to_dss_mode(struct omap_vout_device *vout) /* * Setup the overlay */ -int omapvid_setup_overlay(struct omap_vout_device *vout, +static int omapvid_setup_overlay(struct omap_vout_device *vout, struct omap_overlay *ovl, int posx, int posy, int outw, int outh, u32 addr) { @@ -687,7 +386,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout, /* Setup the input plane parameters according to * rotation value selected. */ - if (rotate_90_or_270(vout)) { + if (is_rotation_90_or_270(vout)) { cropheight = vout->crop.width; cropwidth = vout->crop.height; pixheight = vout->pix.width; @@ -711,7 +410,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout, info.out_width = outw; info.out_height = outh; info.global_alpha = vout->win.global_alpha; - if (!rotation_enabled(vout)) { + if (!is_rotation_enabled(vout)) { info.rotation = 0; info.rotation_type = OMAP_DSS_ROT_DMA; info.screen_width = pixwidth; @@ -744,7 +443,7 @@ setup_ovl_err: /* * Initialize the overlay structure */ -int omapvid_init(struct omap_vout_device *vout, u32 addr) +static int omapvid_init(struct omap_vout_device *vout, u32 addr) { int ret = 0, i; struct v4l2_window *win; @@ -809,7 +508,7 @@ omapvid_init_err: /* * Apply the changes set the go bit of DSS */ -int omapvid_apply_changes(struct omap_vout_device *vout) +static int omapvid_apply_changes(struct omap_vout_device *vout) { int i; struct omap_overlay *ovl; @@ -825,7 +524,7 @@ int omapvid_apply_changes(struct omap_vout_device *vout) return 0; } -void omap_vout_isr(void *arg, unsigned int irqstatus) +static void omap_vout_isr(void *arg, unsigned int irqstatus) { int ret; u32 addr, fid; @@ -848,10 +547,20 @@ void omap_vout_isr(void *arg, unsigned int irqstatus) spin_lock(&vout->vbq_lock); do_gettimeofday(&timevalue); - if (cur_display->type == OMAP_DISPLAY_TYPE_DPI) { - if (!(irqstatus & DISPC_IRQ_VSYNC)) - goto vout_isr_err; + if (cur_display->type != OMAP_DISPLAY_TYPE_VENC) { + switch (cur_display->type) { + case OMAP_DISPLAY_TYPE_DPI: + if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2))) + goto vout_isr_err; + break; + case OMAP_DISPLAY_TYPE_HDMI: + if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN)) + goto vout_isr_err; + break; + default: + goto vout_isr_err; + } if (!vout->first_int && (vout->cur_frm != vout->next_frm)) { vout->cur_frm->ts = timevalue; vout->cur_frm->state = VIDEOBUF_DONE; @@ -875,7 +584,7 @@ void omap_vout_isr(void *arg, unsigned int irqstatus) ret = omapvid_init(vout, addr); if (ret) printk(KERN_ERR VOUT_NAME - "failed to set overlay info\n"); + "failed to set overlay info\n"); /* Enable the pipeline and set the Go bit */ ret = omapvid_apply_changes(vout); if (ret) @@ -954,6 +663,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, int startindex = 0, i, j; u32 phy_addr = 0, virt_addr = 0; struct omap_vout_device *vout = q->priv_data; + struct omapvideo_info *ovid = &vout->vid_info; if (!vout) return -EINVAL; @@ -966,13 +676,10 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex) *count = startindex; - if ((rotation_enabled(vout)) && *count > VRFB_NUM_BUFS) - *count = VRFB_NUM_BUFS; - - /* If rotation is enabled, allocate memory for VRFB space also */ - if (rotation_enabled(vout)) + if (ovid->rotation_type == VOUT_ROT_VRFB) { if (omap_vout_vrfb_buffer_setup(vout, count, startindex)) return -ENOMEM; + } if (V4L2_MEMORY_MMAP != vout->memory) return 0; @@ -996,8 +703,11 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, virt_addr = omap_vout_alloc_buffer(vout->buffer_size, &phy_addr); if (!virt_addr) { - if (!rotation_enabled(vout)) + if (ovid->rotation_type == VOUT_ROT_NONE) { break; + } else { + if (!is_rotation_enabled(vout)) + break; /* Free the VRFB buffers if no space for V4L2 buffers */ for (j = i; j < *count; j++) { omap_vout_free_buffer( @@ -1005,6 +715,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, vout->smsshado_size); vout->smsshado_virt_addr[j] = 0; vout->smsshado_phy_addr[j] = 0; + } } } vout->buf_virt_addr[i] = virt_addr; @@ -1017,9 +728,9 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, /* * Free the V4L2 buffers additionally allocated than default - * number of buffers and free all the VRFB buffers + * number of buffers */ -static void omap_vout_free_allbuffers(struct omap_vout_device *vout) +static void omap_vout_free_extra_buffers(struct omap_vout_device *vout) { int num_buffers = 0, i; @@ -1034,20 +745,6 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout) vout->buf_virt_addr[i] = 0; vout->buf_phy_addr[i] = 0; } - /* Free the VRFB buffers only if they are allocated - * during reqbufs. Don't free if init time allocated - */ - if (!vout->vrfb_static_allocation) { - for (i = 0; i < VRFB_NUM_BUFS; i++) { - if (vout->smsshado_virt_addr[i]) { - omap_vout_free_buffer( - vout->smsshado_virt_addr[i], - vout->smsshado_size); - vout->smsshado_virt_addr[i] = 0; - vout->smsshado_phy_addr[i] = 0; - } - } - } vout->buffer_allocated = num_buffers; } @@ -1059,16 +756,11 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout) * buffer into VRFB memory space before giving it to the DSS. */ static int omap_vout_buffer_prepare(struct videobuf_queue *q, - struct videobuf_buffer *vb, - enum v4l2_field field) + struct videobuf_buffer *vb, + enum v4l2_field field) { - dma_addr_t dmabuf; - struct vid_vrfb_dma *tx; - enum dss_rotation rotation; struct omap_vout_device *vout = q->priv_data; - u32 dest_frame_index = 0, src_element_index = 0; - u32 dest_element_index = 0, src_frame_index = 0; - u32 elem_count = 0, frame_count = 0, pixsize = 2; + struct omapvideo_info *ovid = &vout->vid_info; if (VIDEOBUF_NEEDS_INIT == vb->state) { vb->width = vout->pix.width; @@ -1087,66 +779,24 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q, vout->queued_buf_addr[vb->i] = (u8 *) omap_vout_uservirt_to_phys(vb->baddr); } else { - vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i]; - } + u32 addr, dma_addr; + unsigned long size; - if (!rotation_enabled(vout)) - return 0; + addr = (unsigned long) vout->buf_virt_addr[vb->i]; + size = (unsigned long) vb->size; - dmabuf = vout->buf_phy_addr[vb->i]; - /* If rotation is enabled, copy input buffer into VRFB - * memory space using DMA. We are copying input buffer - * into VRFB memory space of desired angle and DSS will - * read image VRFB memory for 0 degree angle - */ - pixsize = vout->bpp * vout->vrfb_bpp; - /* - * DMA transfer in double index mode - */ + dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, + size, DMA_TO_DEVICE); + if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr)) + v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n"); - /* Frame index */ - dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) - - (vout->pix.width * vout->bpp)) + 1; - - /* Source and destination parameters */ - src_element_index = 0; - src_frame_index = 0; - dest_element_index = 1; - /* Number of elements per frame */ - elem_count = vout->pix.width * vout->bpp; - frame_count = vout->pix.height; - tx = &vout->vrfb_dma_tx; - tx->tx_status = 0; - omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32, - (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT, - tx->dev_id, 0x0); - /* src_port required only for OMAP1 */ - omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, - dmabuf, src_element_index, src_frame_index); - /*set dma source burst mode for VRFB */ - omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); - rotation = calc_rotation(vout); - - /* dest_port required only for OMAP1 */ - omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX, - vout->vrfb_context[vb->i].paddr[0], dest_element_index, - dest_frame_index); - /*set dma dest burst mode for VRFB */ - omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); - omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0); - - omap_start_dma(tx->dma_ch); - interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT); - - if (tx->tx_status == 0) { - omap_stop_dma(tx->dma_ch); - return -EINVAL; + vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i]; } - /* Store buffers physical address into an array. Addresses - * from this array will be used to configure DSS */ - vout->queued_buf_addr[vb->i] = (u8 *) - vout->vrfb_context[vb->i].paddr[rotation]; - return 0; + + if (ovid->rotation_type == VOUT_ROT_VRFB) + return omap_vout_prepare_vrfb(vout, vb); + else + return 0; } /* @@ -1298,7 +948,15 @@ static int omap_vout_release(struct file *file) "Unable to apply changes\n"); /* Free all buffers */ - omap_vout_free_allbuffers(vout); + omap_vout_free_extra_buffers(vout); + + /* Free the VRFB buffers only if they are allocated + * during reqbufs. Don't free if init time allocated + */ + if (ovid->rotation_type == VOUT_ROT_VRFB) { + if (!vout->vrfb_static_allocation) + omap_vout_free_vrfb_buffers(vout); + } videobuf_mmap_free(q); /* Even if apply changes fails we should continue @@ -1307,7 +965,7 @@ static int omap_vout_release(struct file *file) u32 mask = 0; mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | - DISPC_IRQ_EVSYNC_ODD; + DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_VSYNC2; omap_dispc_unregister_isr(omap_vout_isr, vout, mask); vout->streaming = 0; @@ -1383,10 +1041,7 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { int index = fmt->index; - enum v4l2_buf_type type = fmt->type; - fmt->index = index; - fmt->type = type; if (index >= NUM_OUTPUT_FORMATS) return -EINVAL; @@ -1457,7 +1112,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, /* We dont support RGB24-packed mode if vrfb rotation * is enabled*/ - if ((rotation_enabled(vout)) && + if ((is_rotation_enabled(vout)) && f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { ret = -EINVAL; goto s_fmt_vid_out_exit; @@ -1465,7 +1120,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, /* get the framebuffer parameters */ - if (rotate_90_or_270(vout)) { + if (is_rotation_90_or_270(vout)) { vout->fbuf.fmt.height = timing->x_res; vout->fbuf.fmt.width = timing->y_res; } else { @@ -1555,10 +1210,7 @@ static int vidioc_enum_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_fmtdesc *fmt) { int index = fmt->index; - enum v4l2_buf_type type = fmt->type; - fmt->index = index; - fmt->type = type; if (index >= NUM_OUTPUT_FORMATS) return -EINVAL; @@ -1645,7 +1297,7 @@ static int vidioc_s_crop(struct file *file, void *fh, struct v4l2_crop *crop) /* get the display device attached to the overlay */ timing = &ovl->manager->device->panel.timings; - if (rotate_90_or_270(vout)) { + if (is_rotation_90_or_270(vout)) { vout->fbuf.fmt.height = timing->x_res; vout->fbuf.fmt.width = timing->y_res; } else { @@ -1725,9 +1377,17 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a) switch (a->id) { case V4L2_CID_ROTATE: { + struct omapvideo_info *ovid; int rotation = a->value; + ovid = &vout->vid_info; + mutex_lock(&vout->lock); + if (rotation && ovid->rotation_type == VOUT_ROT_NONE) { + mutex_unlock(&vout->lock); + ret = -ERANGE; + break; + } if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) { mutex_unlock(&vout->lock); @@ -1783,6 +1443,11 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a) ovl = ovid->overlays[0]; mutex_lock(&vout->lock); + if (mirror && ovid->rotation_type == VOUT_ROT_NONE) { + mutex_unlock(&vout->lock); + ret = -ERANGE; + break; + } if (mirror && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) { mutex_unlock(&vout->lock); @@ -1893,7 +1558,7 @@ static int vidioc_qbuf(struct file *file, void *fh, } } - if ((rotation_enabled(vout)) && + if ((is_rotation_enabled(vout)) && vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) { v4l2_warn(&vout->vid_dev->v4l2_dev, "DMA Channel not allocated for Rotation\n"); @@ -1908,15 +1573,28 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) struct omap_vout_device *vout = fh; struct videobuf_queue *q = &vout->vbq; + int ret; + u32 addr; + unsigned long size; + struct videobuf_buffer *vb; + + vb = q->bufs[b->index]; + if (!vout->streaming) return -EINVAL; if (file->f_flags & O_NONBLOCK) /* Call videobuf_dqbuf for non blocking mode */ - return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1); + ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1); else /* Call videobuf_dqbuf for blocking mode */ - return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0); + ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0); + + addr = (unsigned long) vout->buf_phy_addr[vb->i]; + size = (unsigned long) vb->size; + dma_unmap_single(vout->vid_dev->v4l2_dev.dev, addr, + size, DMA_TO_DEVICE); + return ret; } static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) @@ -1965,7 +1643,8 @@ static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) addr = (unsigned long) vout->queued_buf_addr[vout->cur_frm->i] + vout->cropped_offset; - mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD; + mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD + | DISPC_IRQ_VSYNC2; omap_dispc_register_isr(omap_vout_isr, vout, mask); @@ -2015,7 +1694,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) return -EINVAL; vout->streaming = 0; - mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD; + mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD + | DISPC_IRQ_VSYNC2; omap_dispc_unregister_isr(omap_vout_isr, vout, mask); @@ -2228,7 +1908,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout) vout->mirror = 0; vout->control[2].id = V4L2_CID_HFLIP; vout->control[2].value = 0; - vout->vrfb_bpp = 2; + if (vout->vid_info.rotation_type == VOUT_ROT_VRFB) + vout->vrfb_bpp = 2; control[1].id = V4L2_CID_BG_COLOR; control[1].value = 0; @@ -2260,17 +1941,15 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev, int vid_num) { u32 numbuffers; - int ret = 0, i, j; - int image_width, image_height; - struct video_device *vfd; + int ret = 0, i; + struct omapvideo_info *ovid; struct omap_vout_device *vout; - int static_vrfb_allocation = 0, vrfb_num_bufs = VRFB_NUM_BUFS; struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); struct omap2video_device *vid_dev = container_of(v4l2_dev, struct omap2video_device, v4l2_dev); vout = vid_dev->vouts[vid_num]; - vfd = vout->vfd; + ovid = &vout->vid_info; numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers; vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize; @@ -2287,66 +1966,16 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev, } } - for (i = 0; i < VRFB_NUM_BUFS; i++) { - if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) { - dev_info(&pdev->dev, ": VRFB allocation failed\n"); - for (j = 0; j < i; j++) - omap_vrfb_release_ctx(&vout->vrfb_context[j]); - ret = -ENOMEM; - goto free_buffers; - } - } vout->cropped_offset = 0; - /* Calculate VRFB memory size */ - /* allocate for worst case size */ - image_width = VID_MAX_WIDTH / TILE_SIZE; - if (VID_MAX_WIDTH % TILE_SIZE) - image_width++; - - image_width = image_width * TILE_SIZE; - image_height = VID_MAX_HEIGHT / TILE_SIZE; - - if (VID_MAX_HEIGHT % TILE_SIZE) - image_height++; - - image_height = image_height * TILE_SIZE; - vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2); - - /* - * Request and Initialize DMA, for DMA based VRFB transfer - */ - vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE; - vout->vrfb_dma_tx.dma_ch = -1; - vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED; - ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX", - omap_vout_vrfb_dma_tx_callback, - (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch); - if (ret < 0) { - vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; - dev_info(&pdev->dev, ": failed to allocate DMA Channel for" - " video%d\n", vfd->minor); - } - init_waitqueue_head(&vout->vrfb_dma_tx.wait); - - /* Allocate VRFB buffers if selected through bootargs */ - static_vrfb_allocation = (vid_num == 0) ? - vid1_static_vrfb_alloc : vid2_static_vrfb_alloc; - - /* statically allocated the VRFB buffer is done through - commands line aruments */ - if (static_vrfb_allocation) { - if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) { - ret = -ENOMEM; - goto release_vrfb_ctx; - } - vout->vrfb_static_allocation = 1; + if (ovid->rotation_type == VOUT_ROT_VRFB) { + int static_vrfb_allocation = (vid_num == 0) ? + vid1_static_vrfb_alloc : vid2_static_vrfb_alloc; + ret = omap_vout_setup_vrfb_bufs(pdev, vid_num, + static_vrfb_allocation); } - return 0; -release_vrfb_ctx: - for (j = 0; j < VRFB_NUM_BUFS; j++) - omap_vrfb_release_ctx(&vout->vrfb_context[j]); + return ret; free_buffers: for (i = 0; i < numbuffers; i++) { @@ -2389,6 +2018,10 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev) vout->vid_info.num_overlays = 1; vout->vid_info.id = k + 1; + /* Set VRFB as rotation_type for omap2 and omap3 */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + vout->vid_info.rotation_type = VOUT_ROT_VRFB; + /* Setup the default configuration for the video devices */ if (omap_vout_setup_video_data(vout) != 0) { @@ -2422,7 +2055,8 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev) goto success; error2: - omap_vout_release_vrfb(vout); + if (vout->vid_info.rotation_type == VOUT_ROT_VRFB) + omap_vout_release_vrfb(vout); omap_vout_free_buffers(vout); error1: video_device_release(vfd); @@ -2443,11 +2077,13 @@ success: static void omap_vout_cleanup_device(struct omap_vout_device *vout) { struct video_device *vfd; + struct omapvideo_info *ovid; if (!vout) return; vfd = vout->vfd; + ovid = &vout->vid_info; if (vfd) { if (!video_is_registered(vfd)) { /* @@ -2463,14 +2099,15 @@ static void omap_vout_cleanup_device(struct omap_vout_device *vout) video_unregister_device(vfd); } } - - omap_vout_release_vrfb(vout); + if (ovid->rotation_type == VOUT_ROT_VRFB) { + omap_vout_release_vrfb(vout); + /* Free the VRFB buffer if allocated + * init time + */ + if (vout->vrfb_static_allocation) + omap_vout_free_vrfb_buffers(vout); + } omap_vout_free_buffers(vout); - /* Free the VRFB buffer if allocated - * init time - */ - if (vout->vrfb_static_allocation) - omap_vout_free_vrfb_buffers(vout); kfree(vout); } diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c new file mode 100644 index 0000000..ebebcac4 --- /dev/null +++ b/drivers/media/video/omap/omap_vout_vrfb.c @@ -0,0 +1,390 @@ +/* + * omap_vout_vrfb.c + * + * Copyright (C) 2010 Texas Instruments. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include <linux/sched.h> +#include <linux/platform_device.h> +#include <linux/videodev2.h> + +#include <media/videobuf-dma-contig.h> +#include <media/v4l2-device.h> + +#include <plat/dma.h> +#include <plat/vrfb.h> + +#include "omap_voutdef.h" +#include "omap_voutlib.h" + +/* + * Function for allocating video buffers + */ +static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout, + unsigned int *count, int startindex) +{ + int i, j; + + for (i = 0; i < *count; i++) { + if (!vout->smsshado_virt_addr[i]) { + vout->smsshado_virt_addr[i] = + omap_vout_alloc_buffer(vout->smsshado_size, + &vout->smsshado_phy_addr[i]); + } + if (!vout->smsshado_virt_addr[i] && startindex != -1) { + if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex) + break; + } + if (!vout->smsshado_virt_addr[i]) { + for (j = 0; j < i; j++) { + omap_vout_free_buffer( + vout->smsshado_virt_addr[j], + vout->smsshado_size); + vout->smsshado_virt_addr[j] = 0; + vout->smsshado_phy_addr[j] = 0; + } + *count = 0; + return -ENOMEM; + } + memset((void *) vout->smsshado_virt_addr[i], 0, + vout->smsshado_size); + } + return 0; +} + +/* + * Wakes up the application once the DMA transfer to VRFB space is completed. + */ +static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data) +{ + struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data; + + t->tx_status = 1; + wake_up_interruptible(&t->wait); +} + +/* + * Free VRFB buffers + */ +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) +{ + int j; + + for (j = 0; j < VRFB_NUM_BUFS; j++) { + omap_vout_free_buffer(vout->smsshado_virt_addr[j], + vout->smsshado_size); + vout->smsshado_virt_addr[j] = 0; + vout->smsshado_phy_addr[j] = 0; + } +} + +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, + u32 static_vrfb_allocation) +{ + int ret = 0, i, j; + struct omap_vout_device *vout; + struct video_device *vfd; + int image_width, image_height; + int vrfb_num_bufs = VRFB_NUM_BUFS; + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); + struct omap2video_device *vid_dev = + container_of(v4l2_dev, struct omap2video_device, v4l2_dev); + + vout = vid_dev->vouts[vid_num]; + vfd = vout->vfd; + + for (i = 0; i < VRFB_NUM_BUFS; i++) { + if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) { + dev_info(&pdev->dev, ": VRFB allocation failed\n"); + for (j = 0; j < i; j++) + omap_vrfb_release_ctx(&vout->vrfb_context[j]); + ret = -ENOMEM; + goto free_buffers; + } + } + + /* Calculate VRFB memory size */ + /* allocate for worst case size */ + image_width = VID_MAX_WIDTH / TILE_SIZE; + if (VID_MAX_WIDTH % TILE_SIZE) + image_width++; + + image_width = image_width * TILE_SIZE; + image_height = VID_MAX_HEIGHT / TILE_SIZE; + + if (VID_MAX_HEIGHT % TILE_SIZE) + image_height++; + + image_height = image_height * TILE_SIZE; + vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2); + + /* + * Request and Initialize DMA, for DMA based VRFB transfer + */ + vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE; + vout->vrfb_dma_tx.dma_ch = -1; + vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED; + ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX", + omap_vout_vrfb_dma_tx_callback, + (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch); + if (ret < 0) { + vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; + dev_info(&pdev->dev, ": failed to allocate DMA Channel for" + " video%d\n", vfd->minor); + } + init_waitqueue_head(&vout->vrfb_dma_tx.wait); + + /* statically allocated the VRFB buffer is done through + commands line aruments */ + if (static_vrfb_allocation) { + if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) { + ret = -ENOMEM; + goto release_vrfb_ctx; + } + vout->vrfb_static_allocation = 1; + } + return 0; + +release_vrfb_ctx: + for (j = 0; j < VRFB_NUM_BUFS; j++) + omap_vrfb_release_ctx(&vout->vrfb_context[j]); +free_buffers: + omap_vout_free_buffers(vout); + + return ret; +} + +/* + * Release the VRFB context once the module exits + */ +void omap_vout_release_vrfb(struct omap_vout_device *vout) +{ + int i; + + for (i = 0; i < VRFB_NUM_BUFS; i++) + omap_vrfb_release_ctx(&vout->vrfb_context[i]); + + if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) { + vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; + omap_free_dma(vout->vrfb_dma_tx.dma_ch); + } +} + +/* + * Allocate the buffers for the VRFB space. Data is copied from V4L2 + * buffers to the VRFB buffers using the DMA engine. + */ +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, + unsigned int *count, unsigned int startindex) +{ + int i; + bool yuv_mode; + + if (!is_rotation_enabled(vout)) + return 0; + + /* If rotation is enabled, allocate memory for VRFB space also */ + *count = *count > VRFB_NUM_BUFS ? VRFB_NUM_BUFS : *count; + + /* Allocate the VRFB buffers only if the buffers are not + * allocated during init time. + */ + if (!vout->vrfb_static_allocation) + if (omap_vout_allocate_vrfb_buffers(vout, count, startindex)) + return -ENOMEM; + + if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 || + vout->dss_mode == OMAP_DSS_COLOR_UYVY) + yuv_mode = true; + else + yuv_mode = false; + + for (i = 0; i < *count; i++) + omap_vrfb_setup(&vout->vrfb_context[i], + vout->smsshado_phy_addr[i], vout->pix.width, + vout->pix.height, vout->bpp, yuv_mode); + + return 0; +} + +int omap_vout_prepare_vrfb(struct omap_vout_device *vout, + struct videobuf_buffer *vb) +{ + dma_addr_t dmabuf; + struct vid_vrfb_dma *tx; + enum dss_rotation rotation; + u32 dest_frame_index = 0, src_element_index = 0; + u32 dest_element_index = 0, src_frame_index = 0; + u32 elem_count = 0, frame_count = 0, pixsize = 2; + + if (!is_rotation_enabled(vout)) + return 0; + + dmabuf = vout->buf_phy_addr[vb->i]; + /* If rotation is enabled, copy input buffer into VRFB + * memory space using DMA. We are copying input buffer + * into VRFB memory space of desired angle and DSS will + * read image VRFB memory for 0 degree angle + */ + pixsize = vout->bpp * vout->vrfb_bpp; + /* + * DMA transfer in double index mode + */ + + /* Frame index */ + dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) - + (vout->pix.width * vout->bpp)) + 1; + + /* Source and destination parameters */ + src_element_index = 0; + src_frame_index = 0; + dest_element_index = 1; + /* Number of elements per frame */ + elem_count = vout->pix.width * vout->bpp; + frame_count = vout->pix.height; + tx = &vout->vrfb_dma_tx; + tx->tx_status = 0; + omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32, + (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT, + tx->dev_id, 0x0); + /* src_port required only for OMAP1 */ + omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, + dmabuf, src_element_index, src_frame_index); + /*set dma source burst mode for VRFB */ + omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); + rotation = calc_rotation(vout); + + /* dest_port required only for OMAP1 */ + omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX, + vout->vrfb_context[vb->i].paddr[0], dest_element_index, + dest_frame_index); + /*set dma dest burst mode for VRFB */ + omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); + omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0); + + omap_start_dma(tx->dma_ch); + interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT); + + if (tx->tx_status == 0) { + omap_stop_dma(tx->dma_ch); + return -EINVAL; + } + /* Store buffers physical address into an array. Addresses + * from this array will be used to configure DSS */ + vout->queued_buf_addr[vb->i] = (u8 *) + vout->vrfb_context[vb->i].paddr[rotation]; + return 0; +} + +/* + * Calculate the buffer offsets from which the streaming should + * start. This offset calculation is mainly required because of + * the VRFB 32 pixels alignment with rotation. + */ +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) +{ + enum dss_rotation rotation; + bool mirroring = vout->mirror; + struct v4l2_rect *crop = &vout->crop; + struct v4l2_pix_format *pix = &vout->pix; + int *cropped_offset = &vout->cropped_offset; + int vr_ps = 1, ps = 2, temp_ps = 2; + int offset = 0, ctop = 0, cleft = 0, line_length = 0; + + rotation = calc_rotation(vout); + + if (V4L2_PIX_FMT_YUYV == pix->pixelformat || + V4L2_PIX_FMT_UYVY == pix->pixelformat) { + if (is_rotation_enabled(vout)) { + /* + * ps - Actual pixel size for YUYV/UYVY for + * VRFB/Mirroring is 4 bytes + * vr_ps - Virtually pixel size for YUYV/UYVY is + * 2 bytes + */ + ps = 4; + vr_ps = 2; + } else { + ps = 2; /* otherwise the pixel size is 2 byte */ + } + } else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) { + ps = 4; + } else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) { + ps = 3; + } + vout->ps = ps; + vout->vr_ps = vr_ps; + + if (is_rotation_enabled(vout)) { + line_length = MAX_PIXELS_PER_LINE; + ctop = (pix->height - crop->height) - crop->top; + cleft = (pix->width - crop->width) - crop->left; + } else { + line_length = pix->width; + } + vout->line_length = line_length; + switch (rotation) { + case dss_rotation_90_degree: + offset = vout->vrfb_context[0].yoffset * + vout->vrfb_context[0].bytespp; + temp_ps = ps / vr_ps; + if (mirroring == 0) { + *cropped_offset = offset + line_length * + temp_ps * cleft + crop->top * temp_ps; + } else { + *cropped_offset = offset + line_length * temp_ps * + cleft + crop->top * temp_ps + (line_length * + ((crop->width / (vr_ps)) - 1) * ps); + } + break; + case dss_rotation_180_degree: + offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset * + vout->vrfb_context[0].bytespp) + + (vout->vrfb_context[0].xoffset * + vout->vrfb_context[0].bytespp)); + if (mirroring == 0) { + *cropped_offset = offset + (line_length * ps * ctop) + + (cleft / vr_ps) * ps; + + } else { + *cropped_offset = offset + (line_length * ps * ctop) + + (cleft / vr_ps) * ps + (line_length * + (crop->height - 1) * ps); + } + break; + case dss_rotation_270_degree: + offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset * + vout->vrfb_context[0].bytespp; + temp_ps = ps / vr_ps; + if (mirroring == 0) { + *cropped_offset = offset + line_length * + temp_ps * crop->left + ctop * ps; + } else { + *cropped_offset = offset + line_length * + temp_ps * crop->left + ctop * ps + + (line_length * ((crop->width / vr_ps) - 1) * + ps); + } + break; + case dss_rotation_0_degree: + if (mirroring == 0) { + *cropped_offset = (line_length * ps) * + crop->top + (crop->left / vr_ps) * ps; + } else { + *cropped_offset = (line_length * ps) * + crop->top + (crop->left / vr_ps) * ps + + (line_length * (crop->height - 1) * ps); + } + break; + default: + *cropped_offset = (line_length * ps * crop->top) / + vr_ps + (crop->left * ps) / vr_ps + + ((crop->width / vr_ps) - 1) * ps; + break; + } +} diff --git a/drivers/media/video/omap/omap_vout_vrfb.h b/drivers/media/video/omap/omap_vout_vrfb.h new file mode 100644 index 0000000..ffde741 --- /dev/null +++ b/drivers/media/video/omap/omap_vout_vrfb.h @@ -0,0 +1,40 @@ +/* + * omap_vout_vrfb.h + * + * Copyright (C) 2010 Texas Instruments. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#ifndef OMAP_VOUT_VRFB_H +#define OMAP_VOUT_VRFB_H + +#ifdef CONFIG_VIDEO_OMAP2_VOUT_VRFB +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout); +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, + u32 static_vrfb_allocation); +void omap_vout_release_vrfb(struct omap_vout_device *vout); +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, + unsigned int *count, unsigned int startindex); +int omap_vout_prepare_vrfb(struct omap_vout_device *vout, + struct videobuf_buffer *vb); +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout); +#else +void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) { } +int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, + u32 static_vrfb_allocation) + { return 0; } +void omap_vout_release_vrfb(struct omap_vout_device *vout) { } +int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, + unsigned int *count, unsigned int startindex) + { return 0; } +int omap_vout_prepare_vrfb(struct omap_vout_device *vout, + struct videobuf_buffer *vb) + { return 0; } +void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) { } +#endif + +#endif diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h index 659497b..d793501 100644 --- a/drivers/media/video/omap/omap_voutdef.h +++ b/drivers/media/video/omap/omap_voutdef.h @@ -12,6 +12,7 @@ #define OMAP_VOUTDEF_H #include <video/omapdss.h> +#include <plat/vrfb.h> #define YUYV_BPP 2 #define RGB565_BPP 2 @@ -27,6 +28,31 @@ #define MAX_DISPLAYS 3 #define MAX_MANAGERS 3 +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 + +/* Max Resolution supported by the driver */ +#define VID_MAX_WIDTH 1280 /* Largest width */ +#define VID_MAX_HEIGHT 720 /* Largest height */ + +/* Mimimum requirement is 2x2 for DSS */ +#define VID_MIN_WIDTH 2 +#define VID_MIN_HEIGHT 2 + +/* 2048 x 2048 is max res supported by OMAP display controller */ +#define MAX_PIXELS_PER_LINE 2048 + +#define VRFB_TX_TIMEOUT 1000 +#define VRFB_NUM_BUFS 4 + +/* Max buffer size tobe allocated during init */ +#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4) + +enum dma_channel_state { + DMA_CHAN_NOT_ALLOTED, + DMA_CHAN_ALLOTED, +}; + /* Enum for Rotation * DSS understands rotation in 0, 1, 2, 3 context * while V4L2 driver understands it as 0, 90, 180, 270 @@ -37,6 +63,18 @@ enum dss_rotation { dss_rotation_180_degree = 2, dss_rotation_270_degree = 3, }; + +/* Enum for choosing rotation type for vout + * DSS2 doesn't understand no rotation as an + * option while V4L2 driver doesn't support + * rotation in the case where VRFB is not built in + * the kernel + */ +enum vout_rotaion_type { + VOUT_ROT_NONE = 0, + VOUT_ROT_VRFB = 1, +}; + /* * This structure is used to store the DMA transfer parameters * for VRFB hidden buffer @@ -53,6 +91,7 @@ struct omapvideo_info { int id; int num_overlays; struct omap_overlay *overlays[MAX_OVLS]; + enum vout_rotaion_type rotation_type; }; struct omap2video_device { @@ -144,4 +183,43 @@ struct omap_vout_device { int io_allowed; }; + +/* + * Return true if rotation is 90 or 270 + */ +static inline int is_rotation_90_or_270(const struct omap_vout_device *vout) +{ + return (vout->rotation == dss_rotation_90_degree || + vout->rotation == dss_rotation_270_degree); +} + +/* + * Return true if rotation is enabled + */ +static inline int is_rotation_enabled(const struct omap_vout_device *vout) +{ + return vout->rotation || vout->mirror; +} + +/* + * Reverse the rotation degree if mirroring is enabled + */ +static inline int calc_rotation(const struct omap_vout_device *vout) +{ + if (!vout->mirror) + return vout->rotation; + + switch (vout->rotation) { + case dss_rotation_90_degree: + return dss_rotation_270_degree; + case dss_rotation_270_degree: + return dss_rotation_90_degree; + case dss_rotation_180_degree: + return dss_rotation_0_degree; + default: + return dss_rotation_180_degree; + } +} + +void omap_vout_free_buffers(struct omap_vout_device *vout); #endif /* ifndef OMAP_VOUTDEF_H */ diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c index 8ae7481..115408b 100644 --- a/drivers/media/video/omap/omap_voutlib.c +++ b/drivers/media/video/omap/omap_voutlib.c @@ -24,8 +24,12 @@ #include <linux/types.h> #include <linux/videodev2.h> +#include <linux/dma-mapping.h> + #include <plat/cpu.h> +#include "omap_voutlib.h" + MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("OMAP Video library"); MODULE_LICENSE("GPL"); @@ -291,3 +295,45 @@ void omap_vout_new_format(struct v4l2_pix_format *pix, } EXPORT_SYMBOL_GPL(omap_vout_new_format); +/* + * Allocate buffers + */ +unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr) +{ + u32 order, size; + unsigned long virt_addr, addr; + + size = PAGE_ALIGN(buf_size); + order = get_order(size); + virt_addr = __get_free_pages(GFP_KERNEL, order); + addr = virt_addr; + + if (virt_addr) { + while (size > 0) { + SetPageReserved(virt_to_page(addr)); + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + } + *phys_addr = (u32) virt_to_phys((void *) virt_addr); + return virt_addr; +} + +/* + * Free buffers + */ +void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size) +{ + u32 order, size; + unsigned long addr = virtaddr; + + size = PAGE_ALIGN(buf_size); + order = get_order(size); + + while (size > 0) { + ClearPageReserved(virt_to_page(addr)); + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + free_pages((unsigned long) virtaddr, order); +} diff --git a/drivers/media/video/omap/omap_voutlib.h b/drivers/media/video/omap/omap_voutlib.h index a60b16e..e51750a 100644 --- a/drivers/media/video/omap/omap_voutlib.h +++ b/drivers/media/video/omap/omap_voutlib.h @@ -12,23 +12,25 @@ #ifndef OMAP_VOUTLIB_H #define OMAP_VOUTLIB_H -extern void omap_vout_default_crop(struct v4l2_pix_format *pix, +void omap_vout_default_crop(struct v4l2_pix_format *pix, struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop); -extern int omap_vout_new_crop(struct v4l2_pix_format *pix, +int omap_vout_new_crop(struct v4l2_pix_format *pix, struct v4l2_rect *crop, struct v4l2_window *win, struct v4l2_framebuffer *fbuf, const struct v4l2_rect *new_crop); -extern int omap_vout_try_window(struct v4l2_framebuffer *fbuf, +int omap_vout_try_window(struct v4l2_framebuffer *fbuf, struct v4l2_window *new_win); -extern int omap_vout_new_window(struct v4l2_rect *crop, +int omap_vout_new_window(struct v4l2_rect *crop, struct v4l2_window *win, struct v4l2_framebuffer *fbuf, struct v4l2_window *new_win); -extern void omap_vout_new_format(struct v4l2_pix_format *pix, +void omap_vout_new_format(struct v4l2_pix_format *pix, struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop, struct v4l2_window *win); +unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr); +void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size); #endif /* #ifndef OMAP_VOUTLIB_H */ diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index e7cfc85b..8a947e6 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -26,7 +26,6 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/version.h> #include <media/omap1_camera.h> #include <media/soc_camera.h> @@ -38,7 +37,7 @@ #define DRIVER_NAME "omap1-camera" -#define VERSION_CODE KERNEL_VERSION(0, 0, 1) +#define DRIVER_VERSION "0.0.2" /* @@ -208,7 +207,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, struct soc_camera_device *icd = vq->priv_data; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; if (bytes_per_line < 0) @@ -222,7 +221,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024) *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size; - dev_dbg(icd->dev.parent, + dev_dbg(icd->parent, "%s: count=%d, size=%d\n", __func__, *count, *size); return 0; @@ -241,7 +240,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf, videobuf_dma_contig_free(vq, vb); } else { struct soc_camera_device *icd = vq->priv_data; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; struct videobuf_dmabuf *dma = videobuf_to_dma(vb); videobuf_dma_unmap(dev, dma); @@ -258,7 +257,7 @@ static int omap1_videobuf_prepare(struct videobuf_queue *vq, struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb); int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; int ret; @@ -490,7 +489,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; struct omap1_cam_buf *buf; u32 mode; @@ -519,7 +518,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq, pcdev->active = buf; pcdev->ready = NULL; - dev_dbg(icd->dev.parent, + dev_dbg(icd->parent, "%s: capture not active, setup FIFO, start DMA\n", __func__); mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK; mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT; @@ -543,8 +542,8 @@ static void omap1_videobuf_release(struct videobuf_queue *vq, struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb); struct soc_camera_device *icd = vq->priv_data; - struct device *dev = icd->dev.parent; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; switch (vb->state) { @@ -573,7 +572,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev, { struct omap1_cam_buf *buf = pcdev->active; struct videobuf_buffer *vb; - struct device *dev = pcdev->icd->dev.parent; + struct device *dev = pcdev->icd->parent; if (WARN_ON(!buf)) { suspend_capture(pcdev); @@ -799,7 +798,7 @@ out: static irqreturn_t cam_isr(int irq, void *data) { struct omap1_cam_dev *pcdev = data; - struct device *dev = pcdev->icd->dev.parent; + struct device *dev = pcdev->icd->parent; struct omap1_cam_buf *buf = pcdev->active; u32 it_status; unsigned long flags; @@ -909,7 +908,7 @@ static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset) */ static int omap1_cam_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; u32 ctrlclock; @@ -952,14 +951,14 @@ static int omap1_cam_add_device(struct soc_camera_device *icd) pcdev->icd = icd; - dev_dbg(icd->dev.parent, "OMAP1 Camera driver attached to camera %d\n", + dev_dbg(icd->parent, "OMAP1 Camera driver attached to camera %d\n", icd->devnum); return 0; } static void omap1_cam_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; u32 ctrlclock; @@ -985,7 +984,7 @@ static void omap1_cam_remove_device(struct soc_camera_device *icd) pcdev->icd = NULL; - dev_dbg(icd->dev.parent, + dev_dbg(icd->parent, "OMAP1 Camera driver detached from camera %d\n", icd->devnum); } @@ -1070,7 +1069,7 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd, unsigned int idx, struct soc_camera_format_xlate *xlate) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; int formats = 0, ret; enum v4l2_mbus_pixelcode code; const struct soc_mbus_pixelfmt *fmt; @@ -1222,9 +1221,9 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd, struct v4l2_rect *rect = &crop->c; const struct soc_camera_format_xlate *xlate = icd->current_fmt; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; - struct device *dev = icd->dev.parent; struct v4l2_mbus_framefmt mf; int ret; @@ -1270,8 +1269,8 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd, { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate; - struct device *dev = icd->dev.parent; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_mbus_framefmt mf; @@ -1326,7 +1325,7 @@ static int omap1_cam_try_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); if (!xlate) { - dev_warn(icd->dev.parent, "Format %#x not found\n", + dev_warn(icd->parent, "Format %#x not found\n", pix->pixelformat); return -EINVAL; } @@ -1362,7 +1361,7 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma) { struct soc_camera_device *icd = q->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; int ret; @@ -1377,17 +1376,17 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q, static void omap1_cam_init_videobuf(struct videobuf_queue *q, struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct omap1_cam_dev *pcdev = ici->priv; if (!sg_mode) videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops, - icd->dev.parent, &pcdev->lock, + icd->parent, &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, sizeof(struct omap1_cam_buf), icd, &icd->video_lock); else videobuf_queue_sg_init(q, &omap1_videobuf_ops, - icd->dev.parent, &pcdev->lock, + icd->parent, &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE, sizeof(struct omap1_cam_buf), icd, &icd->video_lock); @@ -1431,7 +1430,6 @@ static int omap1_cam_querycap(struct soc_camera_host *ici, { /* cap->name is set by the friendly caller:-> */ strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card)); - cap->version = VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; @@ -1440,9 +1438,9 @@ static int omap1_cam_querycap(struct soc_camera_host *ici, static int omap1_cam_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct omap1_cam_dev *pcdev = ici->priv; - struct device *dev = icd->dev.parent; const struct soc_camera_format_xlate *xlate; const struct soc_mbus_pixelfmt *fmt; unsigned long camera_flags, common_flags; @@ -1718,4 +1716,5 @@ MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg"); MODULE_DESCRIPTION("OMAP1 Camera Interface driver"); MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>"); MODULE_LICENSE("GPL v2"); +MODULE_LICENSE(DRIVER_VERSION); MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index 69b60ba..eb97bff 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c @@ -31,7 +31,6 @@ #include <linux/interrupt.h> #include <linux/videodev2.h> #include <linux/pci.h> /* needed for videobufs */ -#include <linux/version.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/io.h> @@ -43,7 +42,7 @@ #include "omap24xxcam.h" -#define OMAP24XXCAM_VERSION KERNEL_VERSION(0, 0, 0) +#define OMAP24XXCAM_VERSION "0.0.1" #define RESET_TIMEOUT_NS 10000 @@ -309,11 +308,11 @@ static int omap24xxcam_vbq_alloc_mmap_buffer(struct videobuf_buffer *vb) order--; /* try to allocate as many contiguous pages as possible */ - page = alloc_pages(GFP_KERNEL | GFP_DMA, order); + page = alloc_pages(GFP_KERNEL, order); /* if allocation fails, try to allocate smaller amount */ while (page == NULL) { order--; - page = alloc_pages(GFP_KERNEL | GFP_DMA, order); + page = alloc_pages(GFP_KERNEL, order); if (page == NULL && !order) { err = -ENOMEM; goto out; @@ -993,7 +992,6 @@ static int vidioc_querycap(struct file *file, void *fh, strlcpy(cap->driver, CAM_NAME, sizeof(cap->driver)); strlcpy(cap->card, cam->vfd->name, sizeof(cap->card)); - cap->version = OMAP24XXCAM_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; @@ -1888,6 +1886,7 @@ static void __exit omap24xxcam_cleanup(void) MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); MODULE_DESCRIPTION("OMAP24xx Video for Linux camera driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(OMAP24XXCAM_VERSION); module_param(video_nr, int, 0); MODULE_PARM_DESC(video_nr, "Minor number for video device (-1 ==> auto assign)"); diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 94b6ed8..5cea2bb 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -2234,3 +2234,4 @@ module_exit(isp_cleanup); MODULE_AUTHOR("Nokia Corporation"); MODULE_DESCRIPTION("TI OMAP3 ISP driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(ISP_VIDEO_DRIVER_VERSION); diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h index 2620c40..529e582 100644 --- a/drivers/media/video/omap3isp/isp.h +++ b/drivers/media/video/omap3isp/isp.h @@ -139,6 +139,10 @@ struct isp_reg { * 3 - CAMEXT[13:6] -> CAM[7:0] * @clk_pol: Pixel clock polarity * 0 - Non Inverted, 1 - Inverted + * @hs_pol: Horizontal synchronization polarity + * 0 - Active high, 1 - Active low + * @vs_pol: Vertical synchronization polarity + * 0 - Active high, 1 - Active low * @bridge: CCDC Bridge input control * ISPCTRL_PAR_BRIDGE_DISABLE - Disable * ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian @@ -147,6 +151,8 @@ struct isp_reg { struct isp_parallel_platform_data { unsigned int data_lane_shift:2; unsigned int clk_pol:1; + unsigned int hs_pol:1; + unsigned int vs_pol:1; unsigned int bridge:4; }; diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index 39d501b..9d3459d 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -1148,6 +1148,8 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) omap3isp_configure_bridge(isp, ccdc->input, pdata, shift); ccdc->syncif.datsz = depth_out; + ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0; + ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0; ccdc_config_sync_if(ccdc, &ccdc->syncif); /* CCDC_PAD_SINK */ @@ -1691,7 +1693,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS) return -EINVAL; - return v4l2_event_subscribe(fh, sub); + return v4l2_event_subscribe(fh, sub, OMAP3ISP_CCDC_NEVENTS); } static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, @@ -2162,7 +2164,6 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc) sd->grp_id = 1 << 16; /* group ID for isp subdevs */ v4l2_set_subdevdata(sd, ccdc); sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; - sd->nevents = OMAP3ISP_CCDC_NEVENTS; pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_SINK; pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE; @@ -2257,8 +2258,6 @@ int omap3isp_ccdc_init(struct isp_device *isp) ccdc->syncif.fldout = 0; ccdc->syncif.fldpol = 0; ccdc->syncif.fldstat = 0; - ccdc->syncif.hdpol = 0; - ccdc->syncif.vdpol = 0; ccdc->clamp.oblen = 0; ccdc->clamp.dcsubval = 0; diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c index 0e16cab..ec9e395 100644 --- a/drivers/media/video/omap3isp/ispccp2.c +++ b/drivers/media/video/omap3isp/ispccp2.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/uaccess.h> +#include <linux/regulator/consumer.h> #include "isp.h" #include "ispreg.h" @@ -163,6 +164,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable) struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); int i; + if (enable && ccp2->vdds_csib) + regulator_enable(ccp2->vdds_csib); + /* Enable/Disable all the LCx channels */ for (i = 0; i < CCP2_LCx_CHANS_NUM; i++) isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i), @@ -186,6 +190,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable) ISPCCP2_LC01_IRQENABLE, ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ); } + + if (!enable && ccp2->vdds_csib) + regulator_disable(ccp2->vdds_csib); } /* @@ -1137,6 +1144,9 @@ error: */ void omap3isp_ccp2_cleanup(struct isp_device *isp) { + struct isp_ccp2_device *ccp2 = &isp->isp_ccp2; + + regulator_put(ccp2->vdds_csib); } /* @@ -1151,14 +1161,27 @@ int omap3isp_ccp2_init(struct isp_device *isp) init_waitqueue_head(&ccp2->wait); - /* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with + /* + * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO + * complex, which is powered by vdds_csib power rail. Hence the + * request for the regulator. + * + * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly * configured. * * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c). */ - if (isp->revision == ISP_REVISION_15_0) + if (isp->revision == ISP_REVISION_2_0) { + ccp2->vdds_csib = regulator_get(isp->dev, "vdds_csib"); + if (IS_ERR(ccp2->vdds_csib)) { + dev_dbg(isp->dev, + "Could not get regulator vdds_csib\n"); + ccp2->vdds_csib = NULL; + } + } else if (isp->revision == ISP_REVISION_15_0) { ccp2->phy = &isp->isp_csiphy1; + } ret = ccp2_init_entities(ccp2); if (ret < 0) diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/video/omap3isp/ispccp2.h index 5505a86..6674e9d 100644 --- a/drivers/media/video/omap3isp/ispccp2.h +++ b/drivers/media/video/omap3isp/ispccp2.h @@ -81,6 +81,7 @@ struct isp_ccp2_device { struct isp_interface_mem_config mem_cfg; struct isp_video video_in; struct isp_csiphy *phy; + struct regulator *vdds_csib; unsigned int error; enum isp_pipeline_stream_state state; wait_queue_head_t wait; diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c index b44cb68..8080659 100644 --- a/drivers/media/video/omap3isp/ispstat.c +++ b/drivers/media/video/omap3isp/ispstat.c @@ -1032,7 +1032,6 @@ static int isp_stat_init_entities(struct ispstat *stat, const char *name, snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name); subdev->grp_id = 1 << 16; /* group ID for isp subdevs */ subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE; - subdev->nevents = STAT_NEVENTS; v4l2_set_subdevdata(subdev, stat); stat->pad.flags = MEDIA_PAD_FL_SINK; @@ -1050,7 +1049,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, if (sub->type != stat->event_type) return -EINVAL; - return v4l2_event_subscribe(fh, sub); + return v4l2_event_subscribe(fh, sub, STAT_NEVENTS); } int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index 9cd8f1a..fd965ad 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -695,7 +695,6 @@ isp_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap) strlcpy(cap->driver, ISP_VIDEO_DRIVER_NAME, sizeof(cap->driver)); strlcpy(cap->card, video->video.name, sizeof(cap->card)); strlcpy(cap->bus_info, "media", sizeof(cap->bus_info)); - cap->version = ISP_VIDEO_DRIVER_VERSION; if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h index 911bea6..53160aa 100644 --- a/drivers/media/video/omap3isp/ispvideo.h +++ b/drivers/media/video/omap3isp/ispvideo.h @@ -27,7 +27,6 @@ #define OMAP3_ISP_VIDEO_H #include <linux/v4l2-mediabus.h> -#include <linux/version.h> #include <media/media-entity.h> #include <media/v4l2-dev.h> #include <media/v4l2-fh.h> @@ -35,7 +34,7 @@ #include "ispqueue.h" #define ISP_VIDEO_DRIVER_NAME "ispvideo" -#define ISP_VIDEO_DRIVER_VERSION KERNEL_VERSION(0, 0, 1) +#define ISP_VIDEO_DRIVER_VERSION "0.0.2" struct isp_device; struct isp_video; diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c index 0cea0cf..9ce2fa0 100644 --- a/drivers/media/video/ov2640.c +++ b/drivers/media/video/ov2640.c @@ -1031,16 +1031,9 @@ static int ov2640_video_probe(struct soc_camera_device *icd, const char *devname; int ret; - /* - * we must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) { - dev_err(&client->dev, "Parent missing or invalid!\n"); - ret = -ENODEV; - goto err; - } + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * check and show product ID and manufacturer ID diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c new file mode 100644 index 0000000..349a4ad --- /dev/null +++ b/drivers/media/video/ov5642.c @@ -0,0 +1,1012 @@ +/* + * Driver for OV5642 CMOS Image Sensor from Omnivision + * + * Copyright (C) 2011, Bastian Hecht <hechtb@gmail.com> + * + * Based on Sony IMX074 Camera Driver + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * Based on Omnivision OV7670 Camera Driver + * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/module.h> + +#include <media/soc_camera.h> +#include <media/soc_mediabus.h> +#include <media/v4l2-chip-ident.h> +#include <media/v4l2-subdev.h> + +/* OV5642 registers */ +#define REG_CHIP_ID_HIGH 0x300a +#define REG_CHIP_ID_LOW 0x300b + +#define REG_WINDOW_START_X_HIGH 0x3800 +#define REG_WINDOW_START_X_LOW 0x3801 +#define REG_WINDOW_START_Y_HIGH 0x3802 +#define REG_WINDOW_START_Y_LOW 0x3803 +#define REG_WINDOW_WIDTH_HIGH 0x3804 +#define REG_WINDOW_WIDTH_LOW 0x3805 +#define REG_WINDOW_HEIGHT_HIGH 0x3806 +#define REG_WINDOW_HEIGHT_LOW 0x3807 +#define REG_OUT_WIDTH_HIGH 0x3808 +#define REG_OUT_WIDTH_LOW 0x3809 +#define REG_OUT_HEIGHT_HIGH 0x380a +#define REG_OUT_HEIGHT_LOW 0x380b +#define REG_OUT_TOTAL_WIDTH_HIGH 0x380c +#define REG_OUT_TOTAL_WIDTH_LOW 0x380d +#define REG_OUT_TOTAL_HEIGHT_HIGH 0x380e +#define REG_OUT_TOTAL_HEIGHT_LOW 0x380f + +/* + * define standard resolution. + * Works currently only for up to 720 lines + * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720 + */ + +#define OV5642_WIDTH 1280 +#define OV5642_HEIGHT 720 +#define OV5642_TOTAL_WIDTH 3200 +#define OV5642_TOTAL_HEIGHT 2000 +#define OV5642_SENSOR_SIZE_X 2592 +#define OV5642_SENSOR_SIZE_Y 1944 + +struct regval_list { + u16 reg_num; + u8 value; +}; + +static struct regval_list ov5642_default_regs_init[] = { + { 0x3103, 0x93 }, + { 0x3008, 0x82 }, + { 0x3017, 0x7f }, + { 0x3018, 0xfc }, + { 0x3810, 0xc2 }, + { 0x3615, 0xf0 }, + { 0x3000, 0x0 }, + { 0x3001, 0x0 }, + { 0x3002, 0x0 }, + { 0x3003, 0x0 }, + { 0x3004, 0xff }, + { 0x3030, 0x2b }, + { 0x3011, 0x8 }, + { 0x3010, 0x10 }, + { 0x3604, 0x60 }, + { 0x3622, 0x60 }, + { 0x3621, 0x9 }, + { 0x3709, 0x0 }, + { 0x4000, 0x21 }, + { 0x401d, 0x22 }, + { 0x3600, 0x54 }, + { 0x3605, 0x4 }, + { 0x3606, 0x3f }, + { 0x3c01, 0x80 }, + { 0x300d, 0x22 }, + { 0x3623, 0x22 }, + { 0x5000, 0x4f }, + { 0x5020, 0x4 }, + { 0x5181, 0x79 }, + { 0x5182, 0x0 }, + { 0x5185, 0x22 }, + { 0x5197, 0x1 }, + { 0x5500, 0xa }, + { 0x5504, 0x0 }, + { 0x5505, 0x7f }, + { 0x5080, 0x8 }, + { 0x300e, 0x18 }, + { 0x4610, 0x0 }, + { 0x471d, 0x5 }, + { 0x4708, 0x6 }, + { 0x370c, 0xa0 }, + { 0x5687, 0x94 }, + { 0x501f, 0x0 }, + { 0x5000, 0x4f }, + { 0x5001, 0xcf }, + { 0x4300, 0x30 }, + { 0x4300, 0x30 }, + { 0x460b, 0x35 }, + { 0x471d, 0x0 }, + { 0x3002, 0xc }, + { 0x3002, 0x0 }, + { 0x4713, 0x3 }, + { 0x471c, 0x50 }, + { 0x4721, 0x2 }, + { 0x4402, 0x90 }, + { 0x460c, 0x22 }, + { 0x3815, 0x44 }, + { 0x3503, 0x7 }, + { 0x3501, 0x73 }, + { 0x3502, 0x80 }, + { 0x350b, 0x0 }, + { 0x3818, 0xc8 }, + { 0x3824, 0x11 }, + { 0x3a00, 0x78 }, + { 0x3a1a, 0x4 }, + { 0x3a13, 0x30 }, + { 0x3a18, 0x0 }, + { 0x3a19, 0x7c }, + { 0x3a08, 0x12 }, + { 0x3a09, 0xc0 }, + { 0x3a0a, 0xf }, + { 0x3a0b, 0xa0 }, + { 0x350c, 0x7 }, + { 0x350d, 0xd0 }, + { 0x3a0d, 0x8 }, + { 0x3a0e, 0x6 }, + { 0x3500, 0x0 }, + { 0x3501, 0x0 }, + { 0x3502, 0x0 }, + { 0x350a, 0x0 }, + { 0x350b, 0x0 }, + { 0x3503, 0x0 }, + { 0x3a0f, 0x3c }, + { 0x3a10, 0x32 }, + { 0x3a1b, 0x3c }, + { 0x3a1e, 0x32 }, + { 0x3a11, 0x80 }, + { 0x3a1f, 0x20 }, + { 0x3030, 0x2b }, + { 0x3a02, 0x0 }, + { 0x3a03, 0x7d }, + { 0x3a04, 0x0 }, + { 0x3a14, 0x0 }, + { 0x3a15, 0x7d }, + { 0x3a16, 0x0 }, + { 0x3a00, 0x78 }, + { 0x3a08, 0x9 }, + { 0x3a09, 0x60 }, + { 0x3a0a, 0x7 }, + { 0x3a0b, 0xd0 }, + { 0x3a0d, 0x10 }, + { 0x3a0e, 0xd }, + { 0x4407, 0x4 }, + { 0x5193, 0x70 }, + { 0x589b, 0x0 }, + { 0x589a, 0xc0 }, + { 0x401e, 0x20 }, + { 0x4001, 0x42 }, + { 0x401c, 0x6 }, + { 0x3825, 0xac }, + { 0x3827, 0xc }, + { 0x528a, 0x1 }, + { 0x528b, 0x4 }, + { 0x528c, 0x8 }, + { 0x528d, 0x10 }, + { 0x528e, 0x20 }, + { 0x528f, 0x28 }, + { 0x5290, 0x30 }, + { 0x5292, 0x0 }, + { 0x5293, 0x1 }, + { 0x5294, 0x0 }, + { 0x5295, 0x4 }, + { 0x5296, 0x0 }, + { 0x5297, 0x8 }, + { 0x5298, 0x0 }, + { 0x5299, 0x10 }, + { 0x529a, 0x0 }, + { 0x529b, 0x20 }, + { 0x529c, 0x0 }, + { 0x529d, 0x28 }, + { 0x529e, 0x0 }, + { 0x529f, 0x30 }, + { 0x5282, 0x0 }, + { 0x5300, 0x0 }, + { 0x5301, 0x20 }, + { 0x5302, 0x0 }, + { 0x5303, 0x7c }, + { 0x530c, 0x0 }, + { 0x530d, 0xc }, + { 0x530e, 0x20 }, + { 0x530f, 0x80 }, + { 0x5310, 0x20 }, + { 0x5311, 0x80 }, + { 0x5308, 0x20 }, + { 0x5309, 0x40 }, + { 0x5304, 0x0 }, + { 0x5305, 0x30 }, + { 0x5306, 0x0 }, + { 0x5307, 0x80 }, + { 0x5314, 0x8 }, + { 0x5315, 0x20 }, + { 0x5319, 0x30 }, + { 0x5316, 0x10 }, + { 0x5317, 0x0 }, + { 0x5318, 0x2 }, + { 0x5380, 0x1 }, + { 0x5381, 0x0 }, + { 0x5382, 0x0 }, + { 0x5383, 0x4e }, + { 0x5384, 0x0 }, + { 0x5385, 0xf }, + { 0x5386, 0x0 }, + { 0x5387, 0x0 }, + { 0x5388, 0x1 }, + { 0x5389, 0x15 }, + { 0x538a, 0x0 }, + { 0x538b, 0x31 }, + { 0x538c, 0x0 }, + { 0x538d, 0x0 }, + { 0x538e, 0x0 }, + { 0x538f, 0xf }, + { 0x5390, 0x0 }, + { 0x5391, 0xab }, + { 0x5392, 0x0 }, + { 0x5393, 0xa2 }, + { 0x5394, 0x8 }, + { 0x5480, 0x14 }, + { 0x5481, 0x21 }, + { 0x5482, 0x36 }, + { 0x5483, 0x57 }, + { 0x5484, 0x65 }, + { 0x5485, 0x71 }, + { 0x5486, 0x7d }, + { 0x5487, 0x87 }, + { 0x5488, 0x91 }, + { 0x5489, 0x9a }, + { 0x548a, 0xaa }, + { 0x548b, 0xb8 }, + { 0x548c, 0xcd }, + { 0x548d, 0xdd }, + { 0x548e, 0xea }, + { 0x548f, 0x1d }, + { 0x5490, 0x5 }, + { 0x5491, 0x0 }, + { 0x5492, 0x4 }, + { 0x5493, 0x20 }, + { 0x5494, 0x3 }, + { 0x5495, 0x60 }, + { 0x5496, 0x2 }, + { 0x5497, 0xb8 }, + { 0x5498, 0x2 }, + { 0x5499, 0x86 }, + { 0x549a, 0x2 }, + { 0x549b, 0x5b }, + { 0x549c, 0x2 }, + { 0x549d, 0x3b }, + { 0x549e, 0x2 }, + { 0x549f, 0x1c }, + { 0x54a0, 0x2 }, + { 0x54a1, 0x4 }, + { 0x54a2, 0x1 }, + { 0x54a3, 0xed }, + { 0x54a4, 0x1 }, + { 0x54a5, 0xc5 }, + { 0x54a6, 0x1 }, + { 0x54a7, 0xa5 }, + { 0x54a8, 0x1 }, + { 0x54a9, 0x6c }, + { 0x54aa, 0x1 }, + { 0x54ab, 0x41 }, + { 0x54ac, 0x1 }, + { 0x54ad, 0x20 }, + { 0x54ae, 0x0 }, + { 0x54af, 0x16 }, + { 0x54b0, 0x1 }, + { 0x54b1, 0x20 }, + { 0x54b2, 0x0 }, + { 0x54b3, 0x10 }, + { 0x54b4, 0x0 }, + { 0x54b5, 0xf0 }, + { 0x54b6, 0x0 }, + { 0x54b7, 0xdf }, + { 0x5402, 0x3f }, + { 0x5403, 0x0 }, + { 0x3406, 0x0 }, + { 0x5180, 0xff }, + { 0x5181, 0x52 }, + { 0x5182, 0x11 }, + { 0x5183, 0x14 }, + { 0x5184, 0x25 }, + { 0x5185, 0x24 }, + { 0x5186, 0x6 }, + { 0x5187, 0x8 }, + { 0x5188, 0x8 }, + { 0x5189, 0x7c }, + { 0x518a, 0x60 }, + { 0x518b, 0xb2 }, + { 0x518c, 0xb2 }, + { 0x518d, 0x44 }, + { 0x518e, 0x3d }, + { 0x518f, 0x58 }, + { 0x5190, 0x46 }, + { 0x5191, 0xf8 }, + { 0x5192, 0x4 }, + { 0x5193, 0x70 }, + { 0x5194, 0xf0 }, + { 0x5195, 0xf0 }, + { 0x5196, 0x3 }, + { 0x5197, 0x1 }, + { 0x5198, 0x4 }, + { 0x5199, 0x12 }, + { 0x519a, 0x4 }, + { 0x519b, 0x0 }, + { 0x519c, 0x6 }, + { 0x519d, 0x82 }, + { 0x519e, 0x0 }, + { 0x5025, 0x80 }, + { 0x3a0f, 0x38 }, + { 0x3a10, 0x30 }, + { 0x3a1b, 0x3a }, + { 0x3a1e, 0x2e }, + { 0x3a11, 0x60 }, + { 0x3a1f, 0x10 }, + { 0x5688, 0xa6 }, + { 0x5689, 0x6a }, + { 0x568a, 0xea }, + { 0x568b, 0xae }, + { 0x568c, 0xa6 }, + { 0x568d, 0x6a }, + { 0x568e, 0x62 }, + { 0x568f, 0x26 }, + { 0x5583, 0x40 }, + { 0x5584, 0x40 }, + { 0x5580, 0x2 }, + { 0x5000, 0xcf }, + { 0x5800, 0x27 }, + { 0x5801, 0x19 }, + { 0x5802, 0x12 }, + { 0x5803, 0xf }, + { 0x5804, 0x10 }, + { 0x5805, 0x15 }, + { 0x5806, 0x1e }, + { 0x5807, 0x2f }, + { 0x5808, 0x15 }, + { 0x5809, 0xd }, + { 0x580a, 0xa }, + { 0x580b, 0x9 }, + { 0x580c, 0xa }, + { 0x580d, 0xc }, + { 0x580e, 0x12 }, + { 0x580f, 0x19 }, + { 0x5810, 0xb }, + { 0x5811, 0x7 }, + { 0x5812, 0x4 }, + { 0x5813, 0x3 }, + { 0x5814, 0x3 }, + { 0x5815, 0x6 }, + { 0x5816, 0xa }, + { 0x5817, 0xf }, + { 0x5818, 0xa }, + { 0x5819, 0x5 }, + { 0x581a, 0x1 }, + { 0x581b, 0x0 }, + { 0x581c, 0x0 }, + { 0x581d, 0x3 }, + { 0x581e, 0x8 }, + { 0x581f, 0xc }, + { 0x5820, 0xa }, + { 0x5821, 0x5 }, + { 0x5822, 0x1 }, + { 0x5823, 0x0 }, + { 0x5824, 0x0 }, + { 0x5825, 0x3 }, + { 0x5826, 0x8 }, + { 0x5827, 0xc }, + { 0x5828, 0xe }, + { 0x5829, 0x8 }, + { 0x582a, 0x6 }, + { 0x582b, 0x4 }, + { 0x582c, 0x5 }, + { 0x582d, 0x7 }, + { 0x582e, 0xb }, + { 0x582f, 0x12 }, + { 0x5830, 0x18 }, + { 0x5831, 0x10 }, + { 0x5832, 0xc }, + { 0x5833, 0xa }, + { 0x5834, 0xb }, + { 0x5835, 0xe }, + { 0x5836, 0x15 }, + { 0x5837, 0x19 }, + { 0x5838, 0x32 }, + { 0x5839, 0x1f }, + { 0x583a, 0x18 }, + { 0x583b, 0x16 }, + { 0x583c, 0x17 }, + { 0x583d, 0x1e }, + { 0x583e, 0x26 }, + { 0x583f, 0x53 }, + { 0x5840, 0x10 }, + { 0x5841, 0xf }, + { 0x5842, 0xd }, + { 0x5843, 0xc }, + { 0x5844, 0xe }, + { 0x5845, 0x9 }, + { 0x5846, 0x11 }, + { 0x5847, 0x10 }, + { 0x5848, 0x10 }, + { 0x5849, 0x10 }, + { 0x584a, 0x10 }, + { 0x584b, 0xe }, + { 0x584c, 0x10 }, + { 0x584d, 0x10 }, + { 0x584e, 0x11 }, + { 0x584f, 0x10 }, + { 0x5850, 0xf }, + { 0x5851, 0xc }, + { 0x5852, 0xf }, + { 0x5853, 0x10 }, + { 0x5854, 0x10 }, + { 0x5855, 0xf }, + { 0x5856, 0xe }, + { 0x5857, 0xb }, + { 0x5858, 0x10 }, + { 0x5859, 0xd }, + { 0x585a, 0xd }, + { 0x585b, 0xc }, + { 0x585c, 0xc }, + { 0x585d, 0xc }, + { 0x585e, 0xb }, + { 0x585f, 0xc }, + { 0x5860, 0xc }, + { 0x5861, 0xc }, + { 0x5862, 0xd }, + { 0x5863, 0x8 }, + { 0x5864, 0x11 }, + { 0x5865, 0x18 }, + { 0x5866, 0x18 }, + { 0x5867, 0x19 }, + { 0x5868, 0x17 }, + { 0x5869, 0x19 }, + { 0x586a, 0x16 }, + { 0x586b, 0x13 }, + { 0x586c, 0x13 }, + { 0x586d, 0x12 }, + { 0x586e, 0x13 }, + { 0x586f, 0x16 }, + { 0x5870, 0x14 }, + { 0x5871, 0x12 }, + { 0x5872, 0x10 }, + { 0x5873, 0x11 }, + { 0x5874, 0x11 }, + { 0x5875, 0x16 }, + { 0x5876, 0x14 }, + { 0x5877, 0x11 }, + { 0x5878, 0x10 }, + { 0x5879, 0xf }, + { 0x587a, 0x10 }, + { 0x587b, 0x14 }, + { 0x587c, 0x13 }, + { 0x587d, 0x12 }, + { 0x587e, 0x11 }, + { 0x587f, 0x11 }, + { 0x5880, 0x12 }, + { 0x5881, 0x15 }, + { 0x5882, 0x14 }, + { 0x5883, 0x15 }, + { 0x5884, 0x15 }, + { 0x5885, 0x15 }, + { 0x5886, 0x13 }, + { 0x5887, 0x17 }, + { 0x3710, 0x10 }, + { 0x3632, 0x51 }, + { 0x3702, 0x10 }, + { 0x3703, 0xb2 }, + { 0x3704, 0x18 }, + { 0x370b, 0x40 }, + { 0x370d, 0x3 }, + { 0x3631, 0x1 }, + { 0x3632, 0x52 }, + { 0x3606, 0x24 }, + { 0x3620, 0x96 }, + { 0x5785, 0x7 }, + { 0x3a13, 0x30 }, + { 0x3600, 0x52 }, + { 0x3604, 0x48 }, + { 0x3606, 0x1b }, + { 0x370d, 0xb }, + { 0x370f, 0xc0 }, + { 0x3709, 0x1 }, + { 0x3823, 0x0 }, + { 0x5007, 0x0 }, + { 0x5009, 0x0 }, + { 0x5011, 0x0 }, + { 0x5013, 0x0 }, + { 0x519e, 0x0 }, + { 0x5086, 0x0 }, + { 0x5087, 0x0 }, + { 0x5088, 0x0 }, + { 0x5089, 0x0 }, + { 0x302b, 0x0 }, + { 0x3503, 0x7 }, + { 0x3011, 0x8 }, + { 0x350c, 0x2 }, + { 0x350d, 0xe4 }, + { 0x3621, 0xc9 }, + { 0x370a, 0x81 }, + { 0xffff, 0xff }, +}; + +static struct regval_list ov5642_default_regs_finalise[] = { + { 0x3810, 0xc2 }, + { 0x3818, 0xc9 }, + { 0x381c, 0x10 }, + { 0x381d, 0xa0 }, + { 0x381e, 0x5 }, + { 0x381f, 0xb0 }, + { 0x3820, 0x0 }, + { 0x3821, 0x0 }, + { 0x3824, 0x11 }, + { 0x3a08, 0x1b }, + { 0x3a09, 0xc0 }, + { 0x3a0a, 0x17 }, + { 0x3a0b, 0x20 }, + { 0x3a0d, 0x2 }, + { 0x3a0e, 0x1 }, + { 0x401c, 0x4 }, + { 0x5682, 0x5 }, + { 0x5683, 0x0 }, + { 0x5686, 0x2 }, + { 0x5687, 0xcc }, + { 0x5001, 0x4f }, + { 0x589b, 0x6 }, + { 0x589a, 0xc5 }, + { 0x3503, 0x0 }, + { 0x460c, 0x20 }, + { 0x460b, 0x37 }, + { 0x471c, 0xd0 }, + { 0x471d, 0x5 }, + { 0x3815, 0x1 }, + { 0x3818, 0xc1 }, + { 0x501f, 0x0 }, + { 0x5002, 0xe0 }, + { 0x4300, 0x32 }, /* UYVY */ + { 0x3002, 0x1c }, + { 0x4800, 0x14 }, + { 0x4801, 0xf }, + { 0x3007, 0x3b }, + { 0x300e, 0x4 }, + { 0x4803, 0x50 }, + { 0x3815, 0x1 }, + { 0x4713, 0x2 }, + { 0x4842, 0x1 }, + { 0x300f, 0xe }, + { 0x3003, 0x3 }, + { 0x3003, 0x1 }, + { 0xffff, 0xff }, +}; + +struct ov5642_datafmt { + enum v4l2_mbus_pixelcode code; + enum v4l2_colorspace colorspace; +}; + +struct ov5642 { + struct v4l2_subdev subdev; + const struct ov5642_datafmt *fmt; +}; + +static const struct ov5642_datafmt ov5642_colour_fmts[] = { + {V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG}, +}; + +static struct ov5642 *to_ov5642(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct ov5642, subdev); +} + +/* Find a data format by a pixel code in an array */ +static const struct ov5642_datafmt + *ov5642_find_datafmt(enum v4l2_mbus_pixelcode code) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ov5642_colour_fmts); i++) + if (ov5642_colour_fmts[i].code == code) + return ov5642_colour_fmts + i; + + return NULL; +} + +static int reg_read(struct i2c_client *client, u16 reg, u8 *val) +{ + int ret; + /* We have 16-bit i2c addresses - care for endianess */ + unsigned char data[2] = { reg >> 8, reg & 0xff }; + + ret = i2c_master_send(client, data, 2); + if (ret < 2) { + dev_err(&client->dev, "%s: i2c read error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + + ret = i2c_master_recv(client, val, 1); + if (ret < 1) { + dev_err(&client->dev, "%s: i2c read error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + return 0; +} + +static int reg_write(struct i2c_client *client, u16 reg, u8 val) +{ + int ret; + unsigned char data[3] = { reg >> 8, reg & 0xff, val }; + + ret = i2c_master_send(client, data, 3); + if (ret < 3) { + dev_err(&client->dev, "%s: i2c write error, reg: %x\n", + __func__, reg); + return ret < 0 ? ret : -EIO; + } + + return 0; +} +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xffff) + return -EINVAL; + + reg->size = 1; + + ret = reg_read(client, reg->reg, &val); + if (!ret) + reg->val = (__u64)val; + + return ret; +} + +static int ov5642_set_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xffff || reg->val & ~0xff) + return -EINVAL; + + return reg_write(client, reg->reg, reg->val); +} +#endif + +static int ov5642_write_array(struct i2c_client *client, + struct regval_list *vals) +{ + while (vals->reg_num != 0xffff || vals->value != 0xff) { + int ret = reg_write(client, vals->reg_num, vals->value); + if (ret < 0) + return ret; + vals++; + } + dev_dbg(&client->dev, "Register list loaded\n"); + return 0; +} + +static int ov5642_set_resolution(struct i2c_client *client) +{ + int ret; + u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8; + u8 start_x_low = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff; + u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8; + u8 start_y_low = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff; + + u8 width_high = OV5642_WIDTH >> 8; + u8 width_low = OV5642_WIDTH & 0xff; + u8 height_high = OV5642_HEIGHT >> 8; + u8 height_low = OV5642_HEIGHT & 0xff; + + u8 total_width_high = OV5642_TOTAL_WIDTH >> 8; + u8 total_width_low = OV5642_TOTAL_WIDTH & 0xff; + u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8; + u8 total_height_low = OV5642_TOTAL_HEIGHT & 0xff; + + ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high); + if (!ret) + ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low); + if (!ret) + ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high); + if (!ret) + ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low); + + if (!ret) + ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high); + if (!ret) + ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low); + if (!ret) + ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high); + if (!ret) + ret = reg_write(client, REG_WINDOW_HEIGHT_LOW, height_low); + + if (!ret) + ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high); + if (!ret) + ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low); + if (!ret) + ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high); + if (!ret) + ret = reg_write(client, REG_OUT_HEIGHT_LOW, height_low); + + if (!ret) + ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width_high); + if (!ret) + ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, total_width_low); + if (!ret) + ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height_high); + if (!ret) + ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW, total_height_low); + + return ret; +} + +static int ov5642_try_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code); + + dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n", + __func__, mf->code, mf->width, mf->height); + + if (!fmt) { + mf->code = ov5642_colour_fmts[0].code; + mf->colorspace = ov5642_colour_fmts[0].colorspace; + } + + mf->width = OV5642_WIDTH; + mf->height = OV5642_HEIGHT; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov5642_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + + dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code); + + /* MIPI CSI could have changed the format, double-check */ + if (!ov5642_find_datafmt(mf->code)) + return -EINVAL; + + ov5642_try_fmt(sd, mf); + + priv->fmt = ov5642_find_datafmt(mf->code); + + ov5642_write_array(client, ov5642_default_regs_init); + ov5642_set_resolution(client); + ov5642_write_array(client, ov5642_default_regs_finalise); + + return 0; +} + +static int ov5642_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov5642 *priv = to_ov5642(client); + + const struct ov5642_datafmt *fmt = priv->fmt; + + mf->code = fmt->code; + mf->colorspace = fmt->colorspace; + mf->width = OV5642_WIDTH; + mf->height = OV5642_HEIGHT; + mf->field = V4L2_FIELD_NONE; + + return 0; +} + +static int ov5642_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(ov5642_colour_fmts)) + return -EINVAL; + + *code = ov5642_colour_fmts[index].code; + return 0; +} + +static int ov5642_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) + return -EINVAL; + + if (id->match.addr != client->addr) + return -ENODEV; + + id->ident = V4L2_IDENT_OV5642; + id->revision = 0; + + return 0; +} + +static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) +{ + struct v4l2_rect *rect = &a->c; + + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + rect->top = 0; + rect->left = 0; + rect->width = OV5642_WIDTH; + rect->height = OV5642_HEIGHT; + + return 0; +} + +static int ov5642_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) +{ + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = OV5642_WIDTH; + a->bounds.height = OV5642_HEIGHT; + a->defrect = a->bounds; + a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + + return 0; +} + +static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = { + .s_mbus_fmt = ov5642_s_fmt, + .g_mbus_fmt = ov5642_g_fmt, + .try_mbus_fmt = ov5642_try_fmt, + .enum_mbus_fmt = ov5642_enum_fmt, + .g_crop = ov5642_g_crop, + .cropcap = ov5642_cropcap, +}; + +static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = { + .g_chip_ident = ov5642_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ov5642_get_register, + .s_register = ov5642_set_register, +#endif +}; + +static struct v4l2_subdev_ops ov5642_subdev_ops = { + .core = &ov5642_subdev_core_ops, + .video = &ov5642_subdev_video_ops, +}; + +/* + * We have to provide soc-camera operations, but we don't have anything to say + * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param + */ +static unsigned long soc_ov5642_query_bus_param(struct soc_camera_device *icd) +{ + return 0; +} + +static int soc_ov5642_set_bus_param(struct soc_camera_device *icd, + unsigned long flags) +{ + return -EINVAL; +} + +static struct soc_camera_ops soc_ov5642_ops = { + .query_bus_param = soc_ov5642_query_bus_param, + .set_bus_param = soc_ov5642_set_bus_param, +}; + +static int ov5642_video_probe(struct soc_camera_device *icd, + struct i2c_client *client) +{ + int ret; + u8 id_high, id_low; + u16 id; + + /* Read sensor Model ID */ + ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high); + if (ret < 0) + return ret; + + id = id_high << 8; + + ret = reg_read(client, REG_CHIP_ID_LOW, &id_low); + if (ret < 0) + return ret; + + id |= id_low; + + dev_info(&client->dev, "Chip ID 0x%04x detected\n", id); + + if (id != 0x5642) + return -ENODEV; + + return 0; +} + +static int ov5642_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ov5642 *priv; + struct soc_camera_device *icd = client->dev.platform_data; + struct soc_camera_link *icl; + int ret; + + if (!icd) { + dev_err(&client->dev, "OV5642: missing soc-camera data!\n"); + return -EINVAL; + } + + icl = to_soc_camera_link(icd); + if (!icl) { + dev_err(&client->dev, "OV5642: missing platform data!\n"); + return -EINVAL; + } + + priv = kzalloc(sizeof(struct ov5642), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops); + + icd->ops = &soc_ov5642_ops; + priv->fmt = &ov5642_colour_fmts[0]; + + ret = ov5642_video_probe(icd, client); + if (ret < 0) + goto error; + + return 0; + +error: + icd->ops = NULL; + kfree(priv); + return ret; +} + +static int ov5642_remove(struct i2c_client *client) +{ + struct ov5642 *priv = to_ov5642(client); + struct soc_camera_device *icd = client->dev.platform_data; + struct soc_camera_link *icl = to_soc_camera_link(icd); + + icd->ops = NULL; + if (icl->free_bus) + icl->free_bus(icl); + kfree(priv); + + return 0; +} + +static const struct i2c_device_id ov5642_id[] = { + { "ov5642", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ov5642_id); + +static struct i2c_driver ov5642_i2c_driver = { + .driver = { + .name = "ov5642", + }, + .probe = ov5642_probe, + .remove = ov5642_remove, + .id_table = ov5642_id, +}; + +static int __init ov5642_mod_init(void) +{ + return i2c_add_driver(&ov5642_i2c_driver); +} + +static void __exit ov5642_mod_exit(void) +{ + i2c_del_driver(&ov5642_i2c_driver); +} + +module_init(ov5642_mod_init); +module_exit(ov5642_mod_exit); + +MODULE_DESCRIPTION("Omnivision OV5642 Camera driver"); +MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index d4e7c11..8aa0585 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -19,8 +19,7 @@ #include <media/v4l2-device.h> #include <media/v4l2-chip-ident.h> #include <media/v4l2-mediabus.h> - -#include "ov7670.h" +#include <media/ov7670.h> MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>"); MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors"); diff --git a/drivers/media/video/ov7670.h b/drivers/media/video/ov7670.h deleted file mode 100644 index b133bc1..0000000 --- a/drivers/media/video/ov7670.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * A V4L2 driver for OmniVision OV7670 cameras. - * - * Copyright 2010 One Laptop Per Child - * - * This file may be distributed under the terms of the GNU General - * Public License, version 2. - */ - -#ifndef __OV7670_H -#define __OV7670_H - -struct ov7670_config { - int min_width; /* Filter out smaller sizes */ - int min_height; /* Filter out smaller sizes */ - int clock_speed; /* External clock speed (MHz) */ - bool use_smbus; /* Use smbus I/O instead of I2C */ -}; - -#endif diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c index 48895ef..397870f 100644 --- a/drivers/media/video/ov772x.c +++ b/drivers/media/video/ov772x.c @@ -1032,13 +1032,9 @@ static int ov772x_video_probe(struct soc_camera_device *icd, u8 pid, ver; const char *devname; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * check and show product ID and manufacturer ID diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c index 5173ac4..3681a6f 100644 --- a/drivers/media/video/ov9640.c +++ b/drivers/media/video/ov9640.c @@ -657,16 +657,9 @@ static int ov9640_video_probe(struct soc_camera_device *icd, const char *devname; int ret = 0; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) { - dev_err(&client->dev, "Parent missing or invalid!\n"); - ret = -ENODEV; - goto err; - } + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * check and show product ID and manufacturer ID diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c index 4d4ee4f..edd1ffc 100644 --- a/drivers/media/video/ov9740.c +++ b/drivers/media/video/ov9740.c @@ -44,12 +44,12 @@ #define OV9740_Y_ADDR_START_LO 0x0347 #define OV9740_X_ADDR_END_HI 0x0348 #define OV9740_X_ADDR_END_LO 0x0349 -#define OV9740_Y_ADDR_END_HI 0x034A -#define OV9740_Y_ADDR_END_LO 0x034B -#define OV9740_X_OUTPUT_SIZE_HI 0x034C -#define OV9740_X_OUTPUT_SIZE_LO 0x034D -#define OV9740_Y_OUTPUT_SIZE_HI 0x034E -#define OV9740_Y_OUTPUT_SIZE_LO 0x034F +#define OV9740_Y_ADDR_END_HI 0x034a +#define OV9740_Y_ADDR_END_LO 0x034b +#define OV9740_X_OUTPUT_SIZE_HI 0x034c +#define OV9740_X_OUTPUT_SIZE_LO 0x034d +#define OV9740_Y_OUTPUT_SIZE_HI 0x034e +#define OV9740_Y_OUTPUT_SIZE_LO 0x034f /* IO Control Registers */ #define OV9740_IO_CREL00 0x3002 @@ -68,6 +68,7 @@ #define OV9740_ANALOG_CTRL04 0x3604 #define OV9740_ANALOG_CTRL10 0x3610 #define OV9740_ANALOG_CTRL12 0x3612 +#define OV9740_ANALOG_CTRL15 0x3615 #define OV9740_ANALOG_CTRL20 0x3620 #define OV9740_ANALOG_CTRL21 0x3621 #define OV9740_ANALOG_CTRL22 0x3622 @@ -89,28 +90,28 @@ #define OV9740_TIMING_CTRL35 0x3835 /* Banding Filter */ -#define OV9740_AEC_MAXEXPO_60_H 0x3A02 -#define OV9740_AEC_MAXEXPO_60_L 0x3A03 -#define OV9740_AEC_B50_STEP_HI 0x3A08 -#define OV9740_AEC_B50_STEP_LO 0x3A09 -#define OV9740_AEC_B60_STEP_HI 0x3A0A -#define OV9740_AEC_B60_STEP_LO 0x3A0B -#define OV9740_AEC_CTRL0D 0x3A0D -#define OV9740_AEC_CTRL0E 0x3A0E -#define OV9740_AEC_MAXEXPO_50_H 0x3A14 -#define OV9740_AEC_MAXEXPO_50_L 0x3A15 +#define OV9740_AEC_MAXEXPO_60_H 0x3a02 +#define OV9740_AEC_MAXEXPO_60_L 0x3a03 +#define OV9740_AEC_B50_STEP_HI 0x3a08 +#define OV9740_AEC_B50_STEP_LO 0x3a09 +#define OV9740_AEC_B60_STEP_HI 0x3a0a +#define OV9740_AEC_B60_STEP_LO 0x3a0b +#define OV9740_AEC_CTRL0D 0x3a0d +#define OV9740_AEC_CTRL0E 0x3a0e +#define OV9740_AEC_MAXEXPO_50_H 0x3a14 +#define OV9740_AEC_MAXEXPO_50_L 0x3a15 /* AEC/AGC Control */ #define OV9740_AEC_ENABLE 0x3503 -#define OV9740_GAIN_CEILING_01 0x3A18 -#define OV9740_GAIN_CEILING_02 0x3A19 -#define OV9740_AEC_HI_THRESHOLD 0x3A11 -#define OV9740_AEC_3A1A 0x3A1A -#define OV9740_AEC_CTRL1B_WPT2 0x3A1B -#define OV9740_AEC_CTRL0F_WPT 0x3A0F -#define OV9740_AEC_CTRL10_BPT 0x3A10 -#define OV9740_AEC_CTRL1E_BPT2 0x3A1E -#define OV9740_AEC_LO_THRESHOLD 0x3A1F +#define OV9740_GAIN_CEILING_01 0x3a18 +#define OV9740_GAIN_CEILING_02 0x3a19 +#define OV9740_AEC_HI_THRESHOLD 0x3a11 +#define OV9740_AEC_3A1A 0x3a1a +#define OV9740_AEC_CTRL1B_WPT2 0x3a1b +#define OV9740_AEC_CTRL0F_WPT 0x3a0f +#define OV9740_AEC_CTRL10_BPT 0x3a10 +#define OV9740_AEC_CTRL1E_BPT2 0x3a1e +#define OV9740_AEC_LO_THRESHOLD 0x3a1f /* BLC Control */ #define OV9740_BLC_AUTO_ENABLE 0x4002 @@ -132,7 +133,7 @@ #define OV9740_VT_SYS_CLK_DIV 0x0303 #define OV9740_VT_PIX_CLK_DIV 0x0301 #define OV9740_PLL_CTRL3010 0x3010 -#define OV9740_VFIFO_CTRL00 0x460E +#define OV9740_VFIFO_CTRL00 0x460e /* ISP Control */ #define OV9740_ISP_CTRL00 0x5000 @@ -141,9 +142,9 @@ #define OV9740_ISP_CTRL05 0x5005 #define OV9740_ISP_CTRL12 0x5012 #define OV9740_ISP_CTRL19 0x5019 -#define OV9740_ISP_CTRL1A 0x501A -#define OV9740_ISP_CTRL1E 0x501E -#define OV9740_ISP_CTRL1F 0x501F +#define OV9740_ISP_CTRL1A 0x501a +#define OV9740_ISP_CTRL1E 0x501e +#define OV9740_ISP_CTRL1F 0x501f #define OV9740_ISP_CTRL20 0x5020 #define OV9740_ISP_CTRL21 0x5021 @@ -158,12 +159,12 @@ #define OV9740_AWB_ADV_CTRL04 0x5187 #define OV9740_AWB_ADV_CTRL05 0x5188 #define OV9740_AWB_ADV_CTRL06 0x5189 -#define OV9740_AWB_ADV_CTRL07 0x518A -#define OV9740_AWB_ADV_CTRL08 0x518B -#define OV9740_AWB_ADV_CTRL09 0x518C -#define OV9740_AWB_ADV_CTRL10 0x518D -#define OV9740_AWB_ADV_CTRL11 0x518E -#define OV9740_AWB_CTRL0F 0x518F +#define OV9740_AWB_ADV_CTRL07 0x518a +#define OV9740_AWB_ADV_CTRL08 0x518b +#define OV9740_AWB_ADV_CTRL09 0x518c +#define OV9740_AWB_ADV_CTRL10 0x518d +#define OV9740_AWB_ADV_CTRL11 0x518e +#define OV9740_AWB_CTRL0F 0x518f #define OV9740_AWB_CTRL10 0x5190 #define OV9740_AWB_CTRL11 0x5191 #define OV9740_AWB_CTRL12 0x5192 @@ -180,27 +181,8 @@ #define OV9740_MIPI_CTRL_3012 0x3012 #define OV9740_SC_CMMM_MIPI_CTR 0x3014 -/* supported resolutions */ -enum { - OV9740_VGA, - OV9740_720P, -}; - -struct ov9740_resolution { - unsigned int width; - unsigned int height; -}; - -static struct ov9740_resolution ov9740_resolutions[] = { - [OV9740_VGA] = { - .width = 640, - .height = 480, - }, - [OV9740_720P] = { - .width = 1280, - .height = 720, - }, -}; +#define OV9740_MAX_WIDTH 1280 +#define OV9740_MAX_HEIGHT 720 /* Misc. structures */ struct ov9740_reg { @@ -219,9 +201,16 @@ struct ov9740_priv { bool flag_vflip; bool flag_hflip; + + /* For suspend/resume. */ + struct v4l2_mbus_framefmt current_mf; + bool current_enable; }; static const struct ov9740_reg ov9740_defaults[] = { + /* Software Reset */ + { OV9740_SOFTWARE_RESET, 0x01 }, + /* Banding Filter */ { OV9740_AEC_B50_STEP_HI, 0x00 }, { OV9740_AEC_B50_STEP_LO, 0xe8 }, @@ -241,36 +230,36 @@ static const struct ov9740_reg ov9740_defaults[] = { /* Un-documented OV9740 registers */ { 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 }, { 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c }, - { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580A, 0x0e }, { 0x580B, 0x16 }, - { 0x580C, 0x06 }, { 0x580D, 0x02 }, { 0x580E, 0x00 }, { 0x580F, 0x00 }, + { 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 }, + { 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 }, { 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 }, { 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 }, - { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581A, 0x07 }, { 0x581B, 0x08 }, - { 0x581C, 0x0b }, { 0x581D, 0x14 }, { 0x581E, 0x28 }, { 0x581F, 0x23 }, + { 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 }, + { 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 }, { 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a }, { 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f }, - { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582A, 0x8f }, { 0x582B, 0x9e }, - { 0x582C, 0x8f }, { 0x582D, 0x9f }, { 0x582E, 0x4f }, { 0x582F, 0x87 }, + { 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e }, + { 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 }, { 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f }, { 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf }, - { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583A, 0x9f }, { 0x583B, 0x7f }, - { 0x583C, 0x5f }, + { 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f }, + { 0x583c, 0x5f }, /* Y Gamma */ { 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e }, { 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 }, - { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548A, 0xa4 }, { 0x548B, 0xb1 }, - { 0x548C, 0xc6 }, { 0x548D, 0xd8 }, { 0x548E, 0xe9 }, + { 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 }, + { 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 }, /* UV Gamma */ { 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 }, { 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 }, - { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549A, 0x02 }, { 0x549B, 0xeb }, - { 0x549C, 0x02 }, { 0x549D, 0xa0 }, { 0x549E, 0x02 }, { 0x549F, 0x67 }, - { 0x54A0, 0x02 }, { 0x54A1, 0x3b }, { 0x54A2, 0x02 }, { 0x54A3, 0x18 }, - { 0x54A4, 0x01 }, { 0x54A5, 0xe7 }, { 0x54A6, 0x01 }, { 0x54A7, 0xc3 }, - { 0x54A8, 0x01 }, { 0x54A9, 0x94 }, { 0x54AA, 0x01 }, { 0x54AB, 0x72 }, - { 0x54AC, 0x01 }, { 0x54AD, 0x57 }, + { 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb }, + { 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 }, + { 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 }, + { 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 }, + { 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 }, + { 0x54ac, 0x01 }, { 0x54ad, 0x57 }, /* AWB */ { OV9740_AWB_CTRL00, 0xf0 }, @@ -296,18 +285,18 @@ static const struct ov9740_reg ov9740_defaults[] = { { OV9740_AWB_CTRL14, 0x00 }, /* CIP */ - { 0x530D, 0x12 }, + { 0x530d, 0x12 }, /* CMX */ { 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 }, { 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 }, - { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538A, 0x00 }, { 0x538B, 0x20 }, - { 0x538C, 0x00 }, { 0x538D, 0x00 }, { 0x538E, 0x00 }, { 0x538F, 0x16 }, + { 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 }, + { 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 }, { 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 }, { 0x5394, 0x18 }, /* 50/60 Detection */ - { 0x3C0A, 0x9c }, { 0x3C0B, 0x3f }, + { 0x3c0a, 0x9c }, { 0x3c0b, 0x3f }, /* Output Select */ { OV9740_IO_OUTPUT_SEL01, 0x00 }, @@ -333,6 +322,7 @@ static const struct ov9740_reg ov9740_defaults[] = { { OV9740_ANALOG_CTRL10, 0xa1 }, { OV9740_ANALOG_CTRL12, 0x24 }, { OV9740_ANALOG_CTRL22, 0x9f }, + { OV9740_ANALOG_CTRL15, 0xf0 }, /* Sensor Control */ { OV9740_SENSOR_CTRL03, 0x42 }, @@ -385,7 +375,7 @@ static const struct ov9740_reg ov9740_defaults[] = { { OV9740_LN_LENGTH_PCK_LO, 0x62 }, /* MIPI Control */ - { OV9740_MIPI_CTRL00, 0x44 }, + { OV9740_MIPI_CTRL00, 0x44 }, /* 0x64 for discontinuous clk */ { OV9740_MIPI_3837, 0x01 }, { OV9740_MIPI_CTRL01, 0x0f }, { OV9740_MIPI_CTRL03, 0x05 }, @@ -393,54 +383,9 @@ static const struct ov9740_reg ov9740_defaults[] = { { OV9740_VFIFO_RD_CTRL, 0x16 }, { OV9740_MIPI_CTRL_3012, 0x70 }, { OV9740_SC_CMMM_MIPI_CTR, 0x01 }, -}; - -static const struct ov9740_reg ov9740_regs_vga[] = { - { OV9740_X_ADDR_START_HI, 0x00 }, - { OV9740_X_ADDR_START_LO, 0xa0 }, - { OV9740_Y_ADDR_START_HI, 0x00 }, - { OV9740_Y_ADDR_START_LO, 0x00 }, - { OV9740_X_ADDR_END_HI, 0x04 }, - { OV9740_X_ADDR_END_LO, 0x63 }, - { OV9740_Y_ADDR_END_HI, 0x02 }, - { OV9740_Y_ADDR_END_LO, 0xd3 }, - { OV9740_X_OUTPUT_SIZE_HI, 0x02 }, - { OV9740_X_OUTPUT_SIZE_LO, 0x80 }, - { OV9740_Y_OUTPUT_SIZE_HI, 0x01 }, - { OV9740_Y_OUTPUT_SIZE_LO, 0xe0 }, - { OV9740_ISP_CTRL1E, 0x03 }, - { OV9740_ISP_CTRL1F, 0xc0 }, - { OV9740_ISP_CTRL20, 0x02 }, - { OV9740_ISP_CTRL21, 0xd0 }, - { OV9740_VFIFO_READ_START_HI, 0x01 }, - { OV9740_VFIFO_READ_START_LO, 0x40 }, - { OV9740_ISP_CTRL00, 0xff }, - { OV9740_ISP_CTRL01, 0xff }, - { OV9740_ISP_CTRL03, 0xff }, -}; -static const struct ov9740_reg ov9740_regs_720p[] = { - { OV9740_X_ADDR_START_HI, 0x00 }, - { OV9740_X_ADDR_START_LO, 0x00 }, - { OV9740_Y_ADDR_START_HI, 0x00 }, - { OV9740_Y_ADDR_START_LO, 0x00 }, - { OV9740_X_ADDR_END_HI, 0x05 }, - { OV9740_X_ADDR_END_LO, 0x03 }, - { OV9740_Y_ADDR_END_HI, 0x02 }, - { OV9740_Y_ADDR_END_LO, 0xd3 }, - { OV9740_X_OUTPUT_SIZE_HI, 0x05 }, - { OV9740_X_OUTPUT_SIZE_LO, 0x00 }, - { OV9740_Y_OUTPUT_SIZE_HI, 0x02 }, - { OV9740_Y_OUTPUT_SIZE_LO, 0xd0 }, - { OV9740_ISP_CTRL1E, 0x05 }, - { OV9740_ISP_CTRL1F, 0x00 }, - { OV9740_ISP_CTRL20, 0x02 }, - { OV9740_ISP_CTRL21, 0xd0 }, - { OV9740_VFIFO_READ_START_HI, 0x02 }, - { OV9740_VFIFO_READ_START_LO, 0x30 }, - { OV9740_ISP_CTRL00, 0xff }, - { OV9740_ISP_CTRL01, 0xef }, - { OV9740_ISP_CTRL03, 0xff }, + /* YUYV order */ + { OV9740_ISP_CTRL19, 0x02 }, }; static enum v4l2_mbus_pixelcode ov9740_codes[] = { @@ -537,7 +482,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset) ret = ov9740_reg_read(client, reg, &val); if (ret < 0) { dev_err(&client->dev, - "[Read]-Modify-Write of register %02x failed!\n", reg); + "[Read]-Modify-Write of register 0x%04x failed!\n", + reg); return ret; } @@ -547,7 +493,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset) ret = ov9740_reg_write(client, reg, val); if (ret < 0) { dev_err(&client->dev, - "Read-Modify-[Write] of register %02x failed!\n", reg); + "Read-Modify-[Write] of register 0x%04x failed!\n", + reg); return ret; } @@ -608,6 +555,8 @@ static int ov9740_s_stream(struct v4l2_subdev *sd, int enable) 0x00); } + priv->current_enable = enable; + return ret; } @@ -630,126 +579,127 @@ static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd) return soc_camera_apply_sensor_flags(icl, flags); } -/* Get status of additional camera capabilities */ -static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct ov9740_priv *priv = to_ov9740(sd); - - switch (ctrl->id) { - case V4L2_CID_VFLIP: - ctrl->value = priv->flag_vflip; - break; - case V4L2_CID_HFLIP: - ctrl->value = priv->flag_hflip; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* Set status of additional camera capabilities */ -static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct ov9740_priv *priv = to_ov9740(sd); - - switch (ctrl->id) { - case V4L2_CID_VFLIP: - priv->flag_vflip = ctrl->value; - break; - case V4L2_CID_HFLIP: - priv->flag_hflip = ctrl->value; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* Get chip identification */ -static int ov9740_g_chip_ident(struct v4l2_subdev *sd, - struct v4l2_dbg_chip_ident *id) +/* select nearest higher resolution for capture */ +static void ov9740_res_roundup(u32 *width, u32 *height) { - struct ov9740_priv *priv = to_ov9740(sd); + /* Width must be a multiple of 4 pixels. */ + *width = ALIGN(*width, 4); - id->ident = priv->ident; - id->revision = priv->revision; + /* Max resolution is 1280x720 (720p). */ + if (*width > OV9740_MAX_WIDTH) + *width = OV9740_MAX_WIDTH; - return 0; + if (*height > OV9740_MAX_HEIGHT) + *height = OV9740_MAX_HEIGHT; } -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int ov9740_get_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) +/* Setup registers according to resolution and color encoding */ +static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height) { - struct i2c_client *client = v4l2_get_subdevdata(sd); + u32 x_start; + u32 y_start; + u32 x_end; + u32 y_end; + bool scaling = 0; + u32 scale_input_x; + u32 scale_input_y; int ret; - u8 val; - - if (reg->reg & ~0xffff) - return -EINVAL; - reg->size = 2; - - ret = ov9740_reg_read(client, reg->reg, &val); - if (ret) - return ret; - - reg->val = (__u64)val; + if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT)) + scaling = 1; - return ret; -} - -static int ov9740_set_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); + /* + * Try to use as much of the sensor area as possible when supporting + * smaller resolutions. Depending on the aspect ratio of the + * chosen resolution, we can either use the full width of the sensor, + * or the full height of the sensor (or both if the aspect ratio is + * the same as 1280x720. + */ + if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) { + scale_input_x = (OV9740_MAX_HEIGHT * width) / height; + scale_input_y = OV9740_MAX_HEIGHT; + } else { + scale_input_x = OV9740_MAX_WIDTH; + scale_input_y = (OV9740_MAX_WIDTH * height) / width; + } - if (reg->reg & ~0xffff || reg->val & ~0xff) - return -EINVAL; + /* These describe the area of the sensor to use. */ + x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2; + y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2; + x_end = x_start + scale_input_x - 1; + y_end = y_start + scale_input_y - 1; - return ov9740_reg_write(client, reg->reg, reg->val); -} -#endif + ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff); + if (ret) + goto done; -/* select nearest higher resolution for capture */ -static void ov9740_res_roundup(u32 *width, u32 *height) -{ - int i; + ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff); + if (ret) + goto done; - for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++) - if ((ov9740_resolutions[i].width >= *width) && - (ov9740_resolutions[i].height >= *height)) { - *width = ov9740_resolutions[i].width; - *height = ov9740_resolutions[i].height; - return; - } + ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff); + if (ret) + goto done; - *width = ov9740_resolutions[OV9740_720P].width; - *height = ov9740_resolutions[OV9740_720P].height; -} + ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff); + if (ret) + goto done; -/* Setup registers according to resolution and color encoding */ -static int ov9740_set_res(struct i2c_client *client, u32 width) -{ - int ret; + ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI, + (scale_input_x - width) >> 8); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO, + (scale_input_x - width) & 0xff); + if (ret) + goto done; - /* select register configuration for given resolution */ - if (width == ov9740_resolutions[OV9740_VGA].width) { - dev_dbg(&client->dev, "Setting image size to 640x480\n"); - ret = ov9740_reg_write_array(client, ov9740_regs_vga, - ARRAY_SIZE(ov9740_regs_vga)); - } else if (width == ov9740_resolutions[OV9740_720P].width) { - dev_dbg(&client->dev, "Setting image size to 1280x720\n"); - ret = ov9740_reg_write_array(client, ov9740_regs_720p, - ARRAY_SIZE(ov9740_regs_720p)); - } else { - dev_err(&client->dev, "Failed to select resolution!\n"); - return -EINVAL; - } + ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef | + (scaling << 4)); + if (ret) + goto done; + ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff); +done: return ret; } @@ -758,6 +708,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct ov9740_priv *priv = to_ov9740(sd); enum v4l2_colorspace cspace; enum v4l2_mbus_pixelcode code = mf->code; int ret; @@ -777,13 +728,15 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd, if (ret < 0) return ret; - ret = ov9740_set_res(client, mf->width); + ret = ov9740_set_res(client, mf->width, mf->height); if (ret < 0) return ret; mf->code = code; mf->colorspace = cspace; + memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt)); + return ret; } @@ -814,8 +767,8 @@ static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) { a->bounds.left = 0; a->bounds.top = 0; - a->bounds.width = ov9740_resolutions[OV9740_720P].width; - a->bounds.height = ov9740_resolutions[OV9740_720P].height; + a->bounds.width = OV9740_MAX_WIDTH; + a->bounds.height = OV9740_MAX_HEIGHT; a->defrect = a->bounds; a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; a->pixelaspect.numerator = 1; @@ -828,13 +781,115 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) { a->c.left = 0; a->c.top = 0; - a->c.width = ov9740_resolutions[OV9740_720P].width; - a->c.height = ov9740_resolutions[OV9740_720P].height; + a->c.width = OV9740_MAX_WIDTH; + a->c.height = OV9740_MAX_HEIGHT; a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; return 0; } +/* Get status of additional camera capabilities */ +static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + ctrl->value = priv->flag_vflip; + break; + case V4L2_CID_HFLIP: + ctrl->value = priv->flag_hflip; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Set status of additional camera capabilities */ +static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + switch (ctrl->id) { + case V4L2_CID_VFLIP: + priv->flag_vflip = ctrl->value; + break; + case V4L2_CID_HFLIP: + priv->flag_hflip = ctrl->value; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Get chip identification */ +static int ov9740_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *id) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + id->ident = priv->ident; + id->revision = priv->revision; + + return 0; +} + +static int ov9740_s_power(struct v4l2_subdev *sd, int on) +{ + struct ov9740_priv *priv = to_ov9740(sd); + + if (!priv->current_enable) + return 0; + + if (on) { + ov9740_s_fmt(sd, &priv->current_mf); + ov9740_s_stream(sd, priv->current_enable); + } else { + ov9740_s_stream(sd, 0); + priv->current_enable = true; + } + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ov9740_get_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + u8 val; + + if (reg->reg & ~0xffff) + return -EINVAL; + + reg->size = 2; + + ret = ov9740_reg_read(client, reg->reg, &val); + if (ret) + return ret; + + reg->val = (__u64)val; + + return ret; +} + +static int ov9740_set_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + if (reg->reg & ~0xffff || reg->val & ~0xff) + return -EINVAL; + + return ov9740_reg_write(client, reg->reg, reg->val); +} +#endif + static int ov9740_video_probe(struct soc_camera_device *icd, struct i2c_client *client) { @@ -843,16 +898,9 @@ static int ov9740_video_probe(struct soc_camera_device *icd, u8 modelhi, modello; int ret; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) { - dev_err(&client->dev, "Parent missing or invalid!\n"); - ret = -ENODEV; - goto err; - } + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * check and show product ID and manufacturer ID @@ -901,24 +949,24 @@ static struct soc_camera_ops ov9740_ops = { .num_controls = ARRAY_SIZE(ov9740_controls), }; +static struct v4l2_subdev_video_ops ov9740_video_ops = { + .s_stream = ov9740_s_stream, + .s_mbus_fmt = ov9740_s_fmt, + .try_mbus_fmt = ov9740_try_fmt, + .enum_mbus_fmt = ov9740_enum_fmt, + .cropcap = ov9740_cropcap, + .g_crop = ov9740_g_crop, +}; + static struct v4l2_subdev_core_ops ov9740_core_ops = { .g_ctrl = ov9740_g_ctrl, .s_ctrl = ov9740_s_ctrl, .g_chip_ident = ov9740_g_chip_ident, + .s_power = ov9740_s_power, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov9740_get_register, .s_register = ov9740_set_register, #endif - -}; - -static struct v4l2_subdev_video_ops ov9740_video_ops = { - .s_stream = ov9740_s_stream, - .s_mbus_fmt = ov9740_s_fmt, - .try_mbus_fmt = ov9740_try_fmt, - .enum_mbus_fmt = ov9740_enum_fmt, - .cropcap = ov9740_cropcap, - .g_crop = ov9740_g_crop, }; static struct v4l2_subdev_ops ov9740_subdev_ops = { diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 7551907..e753b5e 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -28,7 +28,6 @@ #include <linux/mm.h> #include <linux/ioport.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/mutex.h> #include <linux/uaccess.h> #include <asm/io.h> @@ -39,7 +38,7 @@ #include <media/v4l2-device.h> MODULE_LICENSE("GPL"); - +MODULE_VERSION("0.0.4"); #define MOTOROLA 1 #define PHILIPS2 2 /* SAA7191 */ @@ -678,7 +677,6 @@ static int pms_querycap(struct file *file, void *priv, strlcpy(vcap->driver, dev->v4l2_dev.name, sizeof(vcap->driver)); strlcpy(vcap->card, "Mediavision PMS", sizeof(vcap->card)); strlcpy(vcap->bus_info, "ISA", sizeof(vcap->bus_info)); - vcap->version = KERNEL_VERSION(0, 0, 3); vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; return 0; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index 2254194..c1d9bb6 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -168,6 +168,7 @@ module_exit(pvr_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.9.1"); /* diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 3876114..e27f8ab 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -91,7 +91,7 @@ static struct v4l2_capability pvr_capability ={ .driver = "pvrusb2", .card = "Hauppauge WinTV pvr-usb2", .bus_info = "usb", - .version = KERNEL_VERSION(0, 9, 0), + .version = LINUX_VERSION_CODE, .capabilities = (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO | V4L2_CAP_READWRITE), @@ -369,11 +369,6 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) break; } - case VIDIOC_S_AUDIO: - { - ret = -EINVAL; - break; - } case VIDIOC_G_TUNER: { struct v4l2_tuner *vt = (struct v4l2_tuner *)arg; @@ -850,7 +845,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) #endif default : - ret = -EINVAL; + ret = -ENOTTY; break; } diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig index 8da42e4..d63d0a8 100644 --- a/drivers/media/video/pwc/Kconfig +++ b/drivers/media/video/pwc/Kconfig @@ -1,6 +1,7 @@ config USB_PWC tristate "USB Philips Cameras" depends on VIDEO_V4L2 + select VIDEOBUF2_VMALLOC ---help--- Say Y or M here if you want to use one of these Philips & OEM webcams: diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 760b4de..3977add 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -3,6 +3,7 @@ video modes. (C) 1999-2003 Nemosoft Unv. (C) 2004-2006 Luc Saillard (luc@saillard.org) + (C) 2011 Hans de Goede <hdegoede@redhat.com> NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx driver and thus may have bugs that are not present in the original version. @@ -43,61 +44,12 @@ #include <asm/errno.h> #include "pwc.h" -#include "pwc-uncompress.h" #include "pwc-kiara.h" #include "pwc-timon.h" #include "pwc-dec1.h" #include "pwc-dec23.h" -/* Request types: video */ -#define SET_LUM_CTL 0x01 -#define GET_LUM_CTL 0x02 -#define SET_CHROM_CTL 0x03 -#define GET_CHROM_CTL 0x04 -#define SET_STATUS_CTL 0x05 -#define GET_STATUS_CTL 0x06 -#define SET_EP_STREAM_CTL 0x07 -#define GET_EP_STREAM_CTL 0x08 -#define GET_XX_CTL 0x09 -#define SET_XX_CTL 0x0A -#define GET_XY_CTL 0x0B -#define SET_XY_CTL 0x0C -#define SET_MPT_CTL 0x0D -#define GET_MPT_CTL 0x0E - -/* Selectors for the Luminance controls [GS]ET_LUM_CTL */ -#define AGC_MODE_FORMATTER 0x2000 -#define PRESET_AGC_FORMATTER 0x2100 -#define SHUTTER_MODE_FORMATTER 0x2200 -#define PRESET_SHUTTER_FORMATTER 0x2300 -#define PRESET_CONTOUR_FORMATTER 0x2400 -#define AUTO_CONTOUR_FORMATTER 0x2500 -#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 -#define CONTRAST_FORMATTER 0x2700 -#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 -#define FLICKERLESS_MODE_FORMATTER 0x2900 -#define AE_CONTROL_SPEED 0x2A00 -#define BRIGHTNESS_FORMATTER 0x2B00 -#define GAMMA_FORMATTER 0x2C00 - -/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ -#define WB_MODE_FORMATTER 0x1000 -#define AWB_CONTROL_SPEED_FORMATTER 0x1100 -#define AWB_CONTROL_DELAY_FORMATTER 0x1200 -#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 -#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 -#define COLOUR_MODE_FORMATTER 0x1500 -#define SATURATION_MODE_FORMATTER1 0x1600 -#define SATURATION_MODE_FORMATTER2 0x1700 - -/* Selectors for the Status controls [GS]ET_STATUS_CTL */ -#define SAVE_USER_DEFAULTS_FORMATTER 0x0200 -#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 -#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 -#define READ_AGC_FORMATTER 0x0500 -#define READ_SHUTTER_FORMATTER 0x0600 -#define READ_RED_GAIN_FORMATTER 0x0700 -#define READ_BLUE_GAIN_FORMATTER 0x0800 +/* Selectors for status controls used only in this file */ #define GET_STATUS_B00 0x0B00 #define SENSOR_TYPE_FORMATTER1 0x0C00 #define GET_STATUS_3000 0x3000 @@ -116,11 +68,6 @@ /* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */ #define VIDEO_OUTPUT_CONTROL_FORMATTER 0x0100 -/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ -#define PT_RELATIVE_CONTROL_FORMATTER 0x01 -#define PT_RESET_CONTROL_FORMATTER 0x02 -#define PT_STATUS_FORMATTER 0x03 - static const char *size2name[PSZ_MAX] = { "subQCIF", @@ -160,7 +107,7 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev); /****************************************************************************/ static int _send_control_msg(struct pwc_device *pdev, - u8 request, u16 value, int index, void *buf, int buflen, int timeout) + u8 request, u16 value, int index, void *buf, int buflen) { int rc; void *kbuf = NULL; @@ -177,7 +124,7 @@ static int _send_control_msg(struct pwc_device *pdev, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, - kbuf, buflen, timeout); + kbuf, buflen, USB_CTRL_SET_TIMEOUT); kfree(kbuf); return rc; @@ -197,9 +144,13 @@ static int recv_control_msg(struct pwc_device *pdev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, pdev->vcinterface, - kbuf, buflen, 500); + kbuf, buflen, USB_CTRL_GET_TIMEOUT); memcpy(buf, kbuf, buflen); kfree(kbuf); + + if (rc < 0) + PWC_ERROR("recv_control_msg error %d req %02x val %04x\n", + rc, request, value); return rc; } @@ -210,18 +161,16 @@ static inline int send_video_command(struct pwc_device *pdev, SET_EP_STREAM_CTL, VIDEO_OUTPUT_CONTROL_FORMATTER, index, - buf, buflen, 1000); + buf, buflen); } -static inline int send_control_msg(struct pwc_device *pdev, +int send_control_msg(struct pwc_device *pdev, u8 request, u16 value, void *buf, int buflen) { return _send_control_msg(pdev, - request, value, pdev->vcinterface, buf, buflen, 500); + request, value, pdev->vcinterface, buf, buflen); } - - static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) { unsigned char buf[3]; @@ -261,8 +210,11 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret); return ret; } - if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420) - pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); + if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420) { + ret = pwc_dec1_init(pdev, pdev->type, pdev->release, buf); + if (ret < 0) + return ret; + } pdev->cmd_len = 3; memcpy(pdev->cmd_buf, buf, 3); @@ -321,8 +273,11 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) - pwc_dec23_init(pdev, pdev->type, buf); + if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) { + ret = pwc_dec23_init(pdev, pdev->type, buf); + if (ret < 0) + return ret; + } pdev->cmd_len = 13; memcpy(pdev->cmd_buf, buf, 13); @@ -394,8 +349,11 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) - pwc_dec23_init(pdev, pdev->type, buf); + if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) { + ret = pwc_dec23_init(pdev, pdev->type, buf); + if (ret < 0) + return ret; + } pdev->cmd_len = 12; memcpy(pdev->cmd_buf, buf, 12); @@ -452,6 +410,7 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame } pdev->view.x = width; pdev->view.y = height; + pdev->vcompression = compression; pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size; pwc_set_image_buffer_size(pdev); PWC_DEBUG_SIZE("Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y); @@ -511,13 +470,9 @@ unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned i return ret; } -#define BLACK_Y 0 -#define BLACK_U 128 -#define BLACK_V 128 - static void pwc_set_image_buffer_size(struct pwc_device *pdev) { - int i, factor = 0; + int factor = 0; /* for V4L2_PIX_FMT_YUV420 */ switch (pdev->pixfmt) { @@ -541,442 +496,108 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev) */ pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC; pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE; - - /* Fill buffers with black colors */ - for (i = 0; i < pwc_mbufs; i++) { - unsigned char *p = pdev->image_data + pdev->images[i].offset; - memset(p, BLACK_Y, pdev->view.x * pdev->view.y); - p += pdev->view.x * pdev->view.y; - memset(p, BLACK_U, pdev->view.x * pdev->view.y/4); - p += pdev->view.x * pdev->view.y/4; - memset(p, BLACK_V, pdev->view.x * pdev->view.y/4); - } } - - -/* BRIGHTNESS */ - -int pwc_get_brightness(struct pwc_device *pdev) +int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data) { - char buf; int ret; + u8 buf; - ret = recv_control_msg(pdev, - GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); + ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf)); if (ret < 0) return ret; - return buf; -} -int pwc_set_brightness(struct pwc_device *pdev, int value) -{ - char buf; - - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - buf = (value >> 9) & 0x7f; - return send_control_msg(pdev, - SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); + *data = buf; + return 0; } -/* CONTRAST */ - -int pwc_get_contrast(struct pwc_device *pdev) +int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data) { - char buf; int ret; - ret = recv_control_msg(pdev, - GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); + ret = send_control_msg(pdev, request, value, &data, sizeof(data)); if (ret < 0) return ret; - return buf; -} -int pwc_set_contrast(struct pwc_device *pdev, int value) -{ - char buf; - - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - buf = (value >> 10) & 0x3f; - return send_control_msg(pdev, - SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); + return 0; } -/* GAMMA */ - -int pwc_get_gamma(struct pwc_device *pdev) +int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data) { - char buf; int ret; + s8 buf; - ret = recv_control_msg(pdev, - GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); + ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf)); if (ret < 0) return ret; - return buf; -} - -int pwc_set_gamma(struct pwc_device *pdev, int value) -{ - char buf; - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - buf = (value >> 11) & 0x1f; - return send_control_msg(pdev, - SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); -} - - -/* SATURATION */ - -/* return a value between [-100 , 100] */ -int pwc_get_saturation(struct pwc_device *pdev, int *value) -{ - char buf; - int ret, saturation_register; - - if (pdev->type < 675) - return -EINVAL; - if (pdev->type < 730) - saturation_register = SATURATION_MODE_FORMATTER2; - else - saturation_register = SATURATION_MODE_FORMATTER1; - ret = recv_control_msg(pdev, - GET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *value = (signed)buf; + *data = buf; return 0; } -/* @param value saturation color between [-100 , 100] */ -int pwc_set_saturation(struct pwc_device *pdev, int value) +int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data) { - char buf; - int saturation_register; - - if (pdev->type < 675) - return -EINVAL; - if (value < -100) - value = -100; - if (value > 100) - value = 100; - if (pdev->type < 730) - saturation_register = SATURATION_MODE_FORMATTER2; - else - saturation_register = SATURATION_MODE_FORMATTER1; - return send_control_msg(pdev, - SET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); -} - -/* AGC */ - -int pwc_set_agc(struct pwc_device *pdev, int mode, int value) -{ - char buf; int ret; + u8 buf[2]; - if (mode) - buf = 0x0; /* auto */ - else - buf = 0xff; /* fixed */ - - ret = send_control_msg(pdev, - SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); - - if (!mode && ret >= 0) { - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - buf = (value >> 10) & 0x3F; - ret = send_control_msg(pdev, - SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); - } + ret = recv_control_msg(pdev, request, value, buf, sizeof(buf)); if (ret < 0) return ret; + + *data = (buf[1] << 8) | buf[0]; return 0; } -int pwc_get_agc(struct pwc_device *pdev, int *value) +int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data) { - unsigned char buf; int ret; + u8 buf[2]; - ret = recv_control_msg(pdev, - GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); + buf[0] = data & 0xff; + buf[1] = data >> 8; + ret = send_control_msg(pdev, request, value, buf, sizeof(buf)); if (ret < 0) return ret; - if (buf != 0) { /* fixed */ - ret = recv_control_msg(pdev, - GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - if (buf > 0x3F) - buf = 0x3F; - *value = (buf << 10); - } - else { /* auto */ - ret = recv_control_msg(pdev, - GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - /* Gah... this value ranges from 0x00 ... 0x9F */ - if (buf > 0x9F) - buf = 0x9F; - *value = -(48 + buf * 409); - } - return 0; } -int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) -{ - char buf[2]; - int speed, ret; - - - if (mode) - buf[0] = 0x0; /* auto */ - else - buf[0] = 0xff; /* fixed */ - - ret = send_control_msg(pdev, - SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1); - - if (!mode && ret >= 0) { - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - - if (DEVICE_USE_CODEC2(pdev->type)) { - /* speed ranges from 0x0 to 0x290 (656) */ - speed = (value / 100); - buf[1] = speed >> 8; - buf[0] = speed & 0xff; - } else if (DEVICE_USE_CODEC3(pdev->type)) { - /* speed seems to range from 0x0 to 0xff */ - buf[1] = 0; - buf[0] = value >> 8; - } - - ret = send_control_msg(pdev, - SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, - &buf, sizeof(buf)); - } - return ret; -} - -/* This function is not exported to v4l1, so output values between 0 -> 256 */ -int pwc_get_shutter_speed(struct pwc_device *pdev, int *value) +int pwc_button_ctrl(struct pwc_device *pdev, u16 value) { - unsigned char buf[2]; int ret; - ret = recv_control_msg(pdev, - GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf)); + ret = send_control_msg(pdev, SET_STATUS_CTL, value, NULL, 0); if (ret < 0) return ret; - *value = buf[0] + (buf[1] << 8); - if (DEVICE_USE_CODEC2(pdev->type)) { - /* speed ranges from 0x0 to 0x290 (656) */ - *value *= 256/656; - } else if (DEVICE_USE_CODEC3(pdev->type)) { - /* speed seems to range from 0x0 to 0xff */ - } + return 0; } - /* POWER */ - -int pwc_camera_power(struct pwc_device *pdev, int power) +void pwc_camera_power(struct pwc_device *pdev, int power) { char buf; + int r; + + if (!pdev->power_save) + return; if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6)) - return 0; /* Not supported by Nala or Timon < release 6 */ + return; /* Not supported by Nala or Timon < release 6 */ if (power) buf = 0x00; /* active */ else buf = 0xFF; /* power save */ - return send_control_msg(pdev, + r = send_control_msg(pdev, SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, &buf, sizeof(buf)); -} - - - -/* private calls */ - -int pwc_restore_user(struct pwc_device *pdev) -{ - return send_control_msg(pdev, - SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0); -} - -int pwc_save_user(struct pwc_device *pdev) -{ - return send_control_msg(pdev, - SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0); -} - -int pwc_restore_factory(struct pwc_device *pdev) -{ - return send_control_msg(pdev, - SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0); -} - - /* ************************************************* */ - /* Patch by Alvarado: (not in the original version */ - - /* - * the camera recognizes modes from 0 to 4: - * - * 00: indoor (incandescant lighting) - * 01: outdoor (sunlight) - * 02: fluorescent lighting - * 03: manual - * 04: auto - */ -int pwc_set_awb(struct pwc_device *pdev, int mode) -{ - char buf; - int ret; - - if (mode < 0) - mode = 0; - - if (mode > 4) - mode = 4; - - buf = mode & 0x07; /* just the lowest three bits */ - - ret = send_control_msg(pdev, - SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); - - if (ret < 0) - return ret; - return 0; -} - -int pwc_get_awb(struct pwc_device *pdev) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); - - if (ret < 0) - return ret; - return buf; -} - -int pwc_set_red_gain(struct pwc_device *pdev, int value) -{ - unsigned char buf; - - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - /* only the msb is considered */ - buf = value >> 8; - return send_control_msg(pdev, - SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, - &buf, sizeof(buf)); -} - -int pwc_get_red_gain(struct pwc_device *pdev, int *value) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, - &buf, sizeof(buf)); - if (ret < 0) - return ret; - *value = buf << 8; - return 0; -} - - -int pwc_set_blue_gain(struct pwc_device *pdev, int value) -{ - unsigned char buf; - - if (value < 0) - value = 0; - if (value > 0xffff) - value = 0xffff; - /* only the msb is considered */ - buf = value >> 8; - return send_control_msg(pdev, - SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, - &buf, sizeof(buf)); -} - -int pwc_get_blue_gain(struct pwc_device *pdev, int *value) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, - &buf, sizeof(buf)); - if (ret < 0) - return ret; - *value = buf << 8; - return 0; -} - -/* The following two functions are different, since they only read the - internal red/blue gains, which may be different from the manual - gains set or read above. - */ -static int pwc_read_red_gain(struct pwc_device *pdev, int *value) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *value = buf << 8; - return 0; + if (r < 0) + PWC_ERROR("Failed to power %s camera (%d)\n", + power ? "on" : "off", r); } -static int pwc_read_blue_gain(struct pwc_device *pdev, int *value) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *value = buf << 8; - return 0; -} - - static int pwc_set_wb_speed(struct pwc_device *pdev, int speed) { unsigned char buf; @@ -1028,6 +649,7 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) { unsigned char buf[2]; + int r; if (pdev->type < 730) return 0; @@ -1045,8 +667,12 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) buf[0] = on_value; buf[1] = off_value; - return send_control_msg(pdev, + r = send_control_msg(pdev, SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); + if (r < 0) + PWC_ERROR("Failed to set LED on/off time (%d)\n", r); + + return r; } static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) @@ -1069,164 +695,6 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) return 0; } -int pwc_set_contour(struct pwc_device *pdev, int contour) -{ - unsigned char buf; - int ret; - - if (contour < 0) - buf = 0xff; /* auto contour on */ - else - buf = 0x0; /* auto contour off */ - ret = send_control_msg(pdev, - SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - - if (contour < 0) - return 0; - if (contour > 0xffff) - contour = 0xffff; - - buf = (contour >> 10); /* contour preset is [0..3f] */ - ret = send_control_msg(pdev, - SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - return 0; -} - -int pwc_get_contour(struct pwc_device *pdev, int *contour) -{ - unsigned char buf; - int ret; - - ret = recv_control_msg(pdev, - GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - - if (buf == 0) { - /* auto mode off, query current preset value */ - ret = recv_control_msg(pdev, - GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, - &buf, sizeof(buf)); - if (ret < 0) - return ret; - *contour = buf << 10; - } - else - *contour = -1; - return 0; -} - - -int pwc_set_backlight(struct pwc_device *pdev, int backlight) -{ - unsigned char buf; - - if (backlight) - buf = 0xff; - else - buf = 0x0; - return send_control_msg(pdev, - SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, - &buf, sizeof(buf)); -} - -int pwc_get_backlight(struct pwc_device *pdev, int *backlight) -{ - int ret; - unsigned char buf; - - ret = recv_control_msg(pdev, - GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, - &buf, sizeof(buf)); - if (ret < 0) - return ret; - *backlight = !!buf; - return 0; -} - -int pwc_set_colour_mode(struct pwc_device *pdev, int colour) -{ - unsigned char buf; - - if (colour) - buf = 0xff; - else - buf = 0x0; - return send_control_msg(pdev, - SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); -} - -int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) -{ - int ret; - unsigned char buf; - - ret = recv_control_msg(pdev, - GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *colour = !!buf; - return 0; -} - - -int pwc_set_flicker(struct pwc_device *pdev, int flicker) -{ - unsigned char buf; - - if (flicker) - buf = 0xff; - else - buf = 0x0; - return send_control_msg(pdev, - SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); -} - -int pwc_get_flicker(struct pwc_device *pdev, int *flicker) -{ - int ret; - unsigned char buf; - - ret = recv_control_msg(pdev, - GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); - if (ret < 0) - return ret; - *flicker = !!buf; - return 0; -} - -int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) -{ - unsigned char buf; - - if (noise < 0) - noise = 0; - if (noise > 3) - noise = 3; - buf = noise; - return send_control_msg(pdev, - SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, - &buf, sizeof(buf)); -} - -int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) -{ - int ret; - unsigned char buf; - - ret = recv_control_msg(pdev, - GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, - &buf, sizeof(buf)); - if (ret < 0) - return ret; - *noise = buf; - return 0; -} - static int _pwc_mpt_reset(struct pwc_device *pdev, int flags) { unsigned char buf; @@ -1309,7 +777,7 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st return 0; } - +#ifdef CONFIG_USB_PWC_DEBUG int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) { unsigned char buf; @@ -1332,7 +800,7 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) *sensor = buf; return 0; } - +#endif /* End of Add-Ons */ /* ************************************************* */ @@ -1356,37 +824,41 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) /* copy local variable to arg */ #define ARG_OUT(ARG_name) /* nothing */ +/* + * Our ctrls use native values, but the old custom pwc ioctl interface expects + * values from 0 - 65535, define 2 helper functions to scale things. */ +static int pwc_ioctl_g_ctrl(struct v4l2_ctrl *ctrl) +{ + return v4l2_ctrl_g_ctrl(ctrl) * 65535 / ctrl->maximum; +} + +static int pwc_ioctl_s_ctrl(struct v4l2_ctrl *ctrl, int val) +{ + return v4l2_ctrl_s_ctrl(ctrl, val * ctrl->maximum / 65535); +} + long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) { long ret = 0; switch(cmd) { case VIDIOCPWCRUSER: - { - if (pwc_restore_user(pdev)) - ret = -EINVAL; + ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER); break; - } case VIDIOCPWCSUSER: - { - if (pwc_save_user(pdev)) - ret = -EINVAL; + ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER); break; - } case VIDIOCPWCFACTORY: - { - if (pwc_restore_factory(pdev)) - ret = -EINVAL; + ret = pwc_button_ctrl(pdev, RESTORE_FACTORY_DEFAULTS_FORMATTER); break; - } case VIDIOCPWCSCQUAL: { ARG_DEF(int, qual) - if (pdev->iso_init) { + if (vb2_is_streaming(&pdev->vb_queue)) { ret = -EBUSY; break; } @@ -1396,8 +868,6 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) ret = -EINVAL; else ret = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot); - if (ret >= 0) - pdev->vcompression = ARGR(qual); break; } @@ -1432,71 +902,59 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCSAGC: { ARG_DEF(int, agc) - ARG_IN(agc) - if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc))) - ret = -EINVAL; + ret = v4l2_ctrl_s_ctrl(pdev->autogain, ARGR(agc) < 0); + if (ret == 0 && ARGR(agc) >= 0) + ret = pwc_ioctl_s_ctrl(pdev->gain, ARGR(agc)); break; } case VIDIOCPWCGAGC: { ARG_DEF(int, agc) - - if (pwc_get_agc(pdev, ARGA(agc))) - ret = -EINVAL; + if (v4l2_ctrl_g_ctrl(pdev->autogain)) + ARGR(agc) = -1; + else + ARGR(agc) = pwc_ioctl_g_ctrl(pdev->gain); ARG_OUT(agc) break; } case VIDIOCPWCSSHUTTER: { - ARG_DEF(int, shutter_speed) - - ARG_IN(shutter_speed) - ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed)); + ARG_DEF(int, shutter) + ARG_IN(shutter) + ret = v4l2_ctrl_s_ctrl(pdev->exposure_auto, + /* Menu idx 0 = auto, idx 1 = manual */ + ARGR(shutter) >= 0); + if (ret == 0 && ARGR(shutter) >= 0) + ret = pwc_ioctl_s_ctrl(pdev->exposure, ARGR(shutter)); break; } case VIDIOCPWCSAWB: { ARG_DEF(struct pwc_whitebalance, wb) - ARG_IN(wb) - ret = pwc_set_awb(pdev, ARGR(wb).mode); - if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) { - pwc_set_red_gain(pdev, ARGR(wb).manual_red); - pwc_set_blue_gain(pdev, ARGR(wb).manual_blue); - } + ret = v4l2_ctrl_s_ctrl(pdev->auto_white_balance, + ARGR(wb).mode); + if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL) + ret = pwc_ioctl_s_ctrl(pdev->red_balance, + ARGR(wb).manual_red); + if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL) + ret = pwc_ioctl_s_ctrl(pdev->blue_balance, + ARGR(wb).manual_blue); break; } case VIDIOCPWCGAWB: { ARG_DEF(struct pwc_whitebalance, wb) - - memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance)); - ARGR(wb).mode = pwc_get_awb(pdev); - if (ARGR(wb).mode < 0) - ret = -EINVAL; - else { - if (ARGR(wb).mode == PWC_WB_MANUAL) { - ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red); - if (ret < 0) - break; - ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue); - if (ret < 0) - break; - } - if (ARGR(wb).mode == PWC_WB_AUTO) { - ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red); - if (ret < 0) - break; - ret = pwc_read_blue_gain(pdev, &ARGR(wb).read_blue); - if (ret < 0) - break; - } - } + ARGR(wb).mode = v4l2_ctrl_g_ctrl(pdev->auto_white_balance); + ARGR(wb).manual_red = ARGR(wb).read_red = + pwc_ioctl_g_ctrl(pdev->red_balance); + ARGR(wb).manual_blue = ARGR(wb).read_blue = + pwc_ioctl_g_ctrl(pdev->blue_balance); ARG_OUT(wb) break; } @@ -1550,17 +1008,20 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCSCONTOUR: { ARG_DEF(int, contour) - ARG_IN(contour) - ret = pwc_set_contour(pdev, ARGR(contour)); + ret = v4l2_ctrl_s_ctrl(pdev->autocontour, ARGR(contour) < 0); + if (ret == 0 && ARGR(contour) >= 0) + ret = pwc_ioctl_s_ctrl(pdev->contour, ARGR(contour)); break; } case VIDIOCPWCGCONTOUR: { ARG_DEF(int, contour) - - ret = pwc_get_contour(pdev, ARGA(contour)); + if (v4l2_ctrl_g_ctrl(pdev->autocontour)) + ARGR(contour) = -1; + else + ARGR(contour) = pwc_ioctl_g_ctrl(pdev->contour); ARG_OUT(contour) break; } @@ -1568,17 +1029,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCSBACKLIGHT: { ARG_DEF(int, backlight) - ARG_IN(backlight) - ret = pwc_set_backlight(pdev, ARGR(backlight)); + ret = v4l2_ctrl_s_ctrl(pdev->backlight, ARGR(backlight)); break; } case VIDIOCPWCGBACKLIGHT: { ARG_DEF(int, backlight) - - ret = pwc_get_backlight(pdev, ARGA(backlight)); + ARGR(backlight) = v4l2_ctrl_g_ctrl(pdev->backlight); ARG_OUT(backlight) break; } @@ -1586,17 +1045,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCSFLICKER: { ARG_DEF(int, flicker) - ARG_IN(flicker) - ret = pwc_set_flicker(pdev, ARGR(flicker)); + ret = v4l2_ctrl_s_ctrl(pdev->flicker, ARGR(flicker)); break; } case VIDIOCPWCGFLICKER: { ARG_DEF(int, flicker) - - ret = pwc_get_flicker(pdev, ARGA(flicker)); + ARGR(flicker) = v4l2_ctrl_g_ctrl(pdev->flicker); ARG_OUT(flicker) break; } @@ -1604,17 +1061,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCSDYNNOISE: { ARG_DEF(int, dynnoise) - ARG_IN(dynnoise) - ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise)); + ret = v4l2_ctrl_s_ctrl(pdev->noise_reduction, ARGR(dynnoise)); break; } case VIDIOCPWCGDYNNOISE: { ARG_DEF(int, dynnoise) - - ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise)); + ARGR(dynnoise) = v4l2_ctrl_g_ctrl(pdev->noise_reduction); ARG_OUT(dynnoise); break; } diff --git a/drivers/media/video/pwc/pwc-dec1.c b/drivers/media/video/pwc/pwc-dec1.c index c29593f..be0e02c 100644 --- a/drivers/media/video/pwc/pwc-dec1.c +++ b/drivers/media/video/pwc/pwc-dec1.c @@ -22,29 +22,19 @@ along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - - - #include "pwc-dec1.h" - -void pwc_dec1_init(int type, int release, void *buffer, void *table) +int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer) { + struct pwc_dec1_private *pdec; -} - -void pwc_dec1_exit(void) -{ + if (pwc->decompress_data == NULL) { + pdec = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL); + if (pdec == NULL) + return -ENOMEM; + pwc->decompress_data = pdec; + } + pdec = pwc->decompress_data; - - -} - -int pwc_dec1_alloc(struct pwc_device *pwc) -{ - pwc->decompress_data = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL); - if (pwc->decompress_data == NULL) - return -ENOMEM; return 0; } - diff --git a/drivers/media/video/pwc/pwc-dec1.h b/drivers/media/video/pwc/pwc-dec1.h index 8b62ddc..a57d860 100644 --- a/drivers/media/video/pwc/pwc-dec1.h +++ b/drivers/media/video/pwc/pwc-dec1.h @@ -22,8 +22,6 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - - #ifndef PWC_DEC1_H #define PWC_DEC1_H @@ -32,12 +30,8 @@ struct pwc_dec1_private { int version; - }; -int pwc_dec1_alloc(struct pwc_device *pwc); -void pwc_dec1_init(int type, int release, void *buffer, void *private_data); -void pwc_dec1_exit(void); +int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer); #endif - diff --git a/drivers/media/video/pwc/pwc-dec23.c b/drivers/media/video/pwc/pwc-dec23.c index 0c801b8..06a4e87 100644 --- a/drivers/media/video/pwc/pwc-dec23.c +++ b/drivers/media/video/pwc/pwc-dec23.c @@ -916,27 +916,5 @@ void pwc_dec23_decompress(const struct pwc_device *pwc, pout_planar_v += pwc->view.x; } - } - } - -void pwc_dec23_exit(void) -{ - /* Do nothing */ - -} - -/** - * Allocate a private structure used by lookup table. - * You must call kfree() to free the memory allocated. - */ -int pwc_dec23_alloc(struct pwc_device *pwc) -{ - pwc->decompress_data = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); - if (pwc->decompress_data == NULL) - return -ENOMEM; - return 0; -} - -/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ diff --git a/drivers/media/video/pwc/pwc-dec23.h b/drivers/media/video/pwc/pwc-dec23.h index 1c55298..a0ac4f3 100644 --- a/drivers/media/video/pwc/pwc-dec23.h +++ b/drivers/media/video/pwc/pwc-dec23.h @@ -49,19 +49,9 @@ struct pwc_dec23_private }; - -int pwc_dec23_alloc(struct pwc_device *pwc); int pwc_dec23_init(struct pwc_device *pwc, int type, unsigned char *cmd); -void pwc_dec23_exit(void); void pwc_dec23_decompress(const struct pwc_device *pwc, const void *src, void *dst, int flags); - - - #endif - - -/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ - diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index b0bde5a..51ca358 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -2,6 +2,7 @@ USB and Video4Linux interface part. (C) 1999-2004 Nemosoft Unv. (C) 2004-2006 Luc Saillard (luc@saillard.org) + (C) 2011 Hans de Goede <hdegoede@redhat.com> NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx driver and thus may have bugs that are not present in the original version. @@ -74,7 +75,6 @@ #include "pwc-timon.h" #include "pwc-dec23.h" #include "pwc-dec1.h" -#include "pwc-uncompress.h" /* Function prototypes and driver templates */ @@ -116,6 +116,7 @@ MODULE_DEVICE_TABLE(usb, pwc_device_table); static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id); static void usb_pwc_disconnect(struct usb_interface *intf); +static void pwc_isoc_cleanup(struct pwc_device *pdev); static struct usb_driver pwc_driver = { .name = "Philips webcam", /* name */ @@ -127,14 +128,11 @@ static struct usb_driver pwc_driver = { #define MAX_DEV_HINTS 20 #define MAX_ISOC_ERRORS 20 -static int default_size = PSZ_QCIF; static int default_fps = 10; -static int default_fbufs = 3; /* Default number of frame buffers */ - int pwc_mbufs = 2; /* Default number of mmap() buffers */ #ifdef CONFIG_USB_PWC_DEBUG int pwc_trace = PWC_DEBUG_LEVEL; #endif -static int power_save; +static int power_save = -1; static int led_on = 100, led_off; /* defaults to LED that is on while in use */ static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */ static struct { @@ -173,389 +171,20 @@ static struct video_device pwc_template = { /***************************************************************************/ /* Private functions */ -/* Here we want the physical address of the memory. - * This is used when initializing the contents of the area. - */ - - - -static void *pwc_rvmalloc(unsigned long size) -{ - void * mem; - unsigned long adr; - - mem=vmalloc_32(size); - if (!mem) - return NULL; - - memset(mem, 0, size); /* Clear the ram out, no junk to the user */ - adr=(unsigned long) mem; - while (size > 0) - { - SetPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - return mem; -} - -static void pwc_rvfree(void * mem, unsigned long size) -{ - unsigned long adr; - - if (!mem) - return; - - adr=(unsigned long) mem; - while ((long) size > 0) - { - ClearPageReserved(vmalloc_to_page((void *)adr)); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - vfree(mem); -} - - - - -static int pwc_allocate_buffers(struct pwc_device *pdev) -{ - int i, err; - void *kbuf; - - PWC_DEBUG_MEMORY(">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev); - - if (pdev == NULL) - return -ENXIO; - - /* Allocate Isochronuous pipe buffers */ - for (i = 0; i < MAX_ISO_BUFS; i++) { - if (pdev->sbuf[i].data == NULL) { - kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL); - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate iso buffer %d.\n", i); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated iso buffer at %p.\n", kbuf); - pdev->sbuf[i].data = kbuf; - } - } - - /* Allocate frame buffer structure */ - if (pdev->fbuf == NULL) { - kbuf = kzalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL); - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate frame buffer structure.\n"); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated frame buffer structure at %p.\n", kbuf); - pdev->fbuf = kbuf; - } - - /* create frame buffers, and make circular ring */ - for (i = 0; i < default_fbufs; i++) { - if (pdev->fbuf[i].data == NULL) { - kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */ - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate frame buffer %d.\n", i); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf); - pdev->fbuf[i].data = kbuf; - } - } - - /* Allocate decompressor table space */ - if (DEVICE_USE_CODEC1(pdev->type)) - err = pwc_dec1_alloc(pdev); - else - err = pwc_dec23_alloc(pdev); - - if (err) { - PWC_ERROR("Failed to allocate decompress table.\n"); - return err; - } - - /* Allocate image buffer; double buffer for mmap() */ - kbuf = pwc_rvmalloc(pwc_mbufs * pdev->len_per_image); - if (kbuf == NULL) { - PWC_ERROR("Failed to allocate image buffer(s). needed (%d)\n", - pwc_mbufs * pdev->len_per_image); - return -ENOMEM; - } - PWC_DEBUG_MEMORY("Allocated image buffer at %p.\n", kbuf); - pdev->image_data = kbuf; - for (i = 0; i < pwc_mbufs; i++) { - pdev->images[i].offset = i * pdev->len_per_image; - pdev->images[i].vma_use_count = 0; - } - for (; i < MAX_IMAGES; i++) { - pdev->images[i].offset = 0; - } - - kbuf = NULL; - - PWC_DEBUG_MEMORY("<< pwc_allocate_buffers()\n"); - return 0; -} - -static void pwc_free_buffers(struct pwc_device *pdev) -{ - int i; - - PWC_DEBUG_MEMORY("Entering free_buffers(%p).\n", pdev); - - if (pdev == NULL) - return; - /* Release Iso-pipe buffers */ - for (i = 0; i < MAX_ISO_BUFS; i++) - if (pdev->sbuf[i].data != NULL) { - PWC_DEBUG_MEMORY("Freeing ISO buffer at %p.\n", pdev->sbuf[i].data); - kfree(pdev->sbuf[i].data); - pdev->sbuf[i].data = NULL; - } - - /* The same for frame buffers */ - if (pdev->fbuf != NULL) { - for (i = 0; i < default_fbufs; i++) { - if (pdev->fbuf[i].data != NULL) { - PWC_DEBUG_MEMORY("Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data); - vfree(pdev->fbuf[i].data); - pdev->fbuf[i].data = NULL; - } - } - kfree(pdev->fbuf); - pdev->fbuf = NULL; - } - - /* Intermediate decompression buffer & tables */ - if (pdev->decompress_data != NULL) { - PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n", pdev->decompress_data); - kfree(pdev->decompress_data); - pdev->decompress_data = NULL; - } - - /* Release image buffers */ - if (pdev->image_data != NULL) { - PWC_DEBUG_MEMORY("Freeing image buffer at %p.\n", pdev->image_data); - pwc_rvfree(pdev->image_data, pwc_mbufs * pdev->len_per_image); - } - pdev->image_data = NULL; - - PWC_DEBUG_MEMORY("Leaving free_buffers().\n"); -} - -/* The frame & image buffer mess. - - Yes, this is a mess. Well, it used to be simple, but alas... In this - module, 3 buffers schemes are used to get the data from the USB bus to - the user program. The first scheme involves the ISO buffers (called thus - since they transport ISO data from the USB controller), and not really - interesting. Suffices to say the data from this buffer is quickly - gathered in an interrupt handler (pwc_isoc_handler) and placed into the - frame buffer. - - The frame buffer is the second scheme, and is the central element here. - It collects the data from a single frame from the camera (hence, the - name). Frames are delimited by the USB camera with a short USB packet, - so that's easy to detect. The frame buffers form a list that is filled - by the camera+USB controller and drained by the user process through - either read() or mmap(). - - The image buffer is the third scheme, in which frames are decompressed - and converted into planar format. For mmap() there is more than - one image buffer available. - - The frame buffers provide the image buffering. In case the user process - is a bit slow, this introduces lag and some undesired side-effects. - The problem arises when the frame buffer is full. I used to drop the last - frame, which makes the data in the queue stale very quickly. But dropping - the frame at the head of the queue proved to be a litte bit more difficult. - I tried a circular linked scheme, but this introduced more problems than - it solved. - - Because filling and draining are completely asynchronous processes, this - requires some fiddling with pointers and mutexes. - - Eventually, I came up with a system with 2 lists: an 'empty' frame list - and a 'full' frame list: - * Initially, all frame buffers but one are on the 'empty' list; the one - remaining buffer is our initial fill frame. - * If a frame is needed for filling, we try to take it from the 'empty' - list, unless that list is empty, in which case we take the buffer at - the head of the 'full' list. - * When our fill buffer has been filled, it is appended to the 'full' - list. - * If a frame is needed by read() or mmap(), it is taken from the head of - the 'full' list, handled, and then appended to the 'empty' list. If no - buffer is present on the 'full' list, we wait. - The advantage is that the buffer that is currently being decompressed/ - converted, is on neither list, and thus not in our way (any other scheme - I tried had the problem of old data lingering in the queue). - - Whatever strategy you choose, it always remains a tradeoff: with more - frame buffers the chances of a missed frame are reduced. On the other - hand, on slower machines it introduces lag because the queue will - always be full. - */ - -/** - \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first. - */ -static int pwc_next_fill_frame(struct pwc_device *pdev) -{ - int ret; - unsigned long flags; - - ret = 0; - spin_lock_irqsave(&pdev->ptrlock, flags); - if (pdev->fill_frame != NULL) { - /* append to 'full' list */ - if (pdev->full_frames == NULL) { - pdev->full_frames = pdev->fill_frame; - pdev->full_frames_tail = pdev->full_frames; - } - else { - pdev->full_frames_tail->next = pdev->fill_frame; - pdev->full_frames_tail = pdev->fill_frame; - } - } - if (pdev->empty_frames != NULL) { - /* We have empty frames available. That's easy */ - pdev->fill_frame = pdev->empty_frames; - pdev->empty_frames = pdev->empty_frames->next; - } - else { - /* Hmm. Take it from the full list */ - /* sanity check */ - if (pdev->full_frames == NULL) { - PWC_ERROR("Neither empty or full frames available!\n"); - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return -EINVAL; - } - pdev->fill_frame = pdev->full_frames; - pdev->full_frames = pdev->full_frames->next; - ret = 1; - } - pdev->fill_frame->next = NULL; - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; -} - - -/** - \brief Reset all buffers, pointers and lists, except for the image_used[] buffer. - - If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble. - */ -static void pwc_reset_buffers(struct pwc_device *pdev) -{ - int i; - unsigned long flags; - - PWC_DEBUG_MEMORY(">> %s __enter__\n", __func__); - - spin_lock_irqsave(&pdev->ptrlock, flags); - pdev->full_frames = NULL; - pdev->full_frames_tail = NULL; - for (i = 0; i < default_fbufs; i++) { - pdev->fbuf[i].filled = 0; - if (i > 0) - pdev->fbuf[i].next = &pdev->fbuf[i - 1]; - else - pdev->fbuf->next = NULL; - } - pdev->empty_frames = &pdev->fbuf[default_fbufs - 1]; - pdev->empty_frames_tail = pdev->fbuf; - pdev->read_frame = NULL; - pdev->fill_frame = pdev->empty_frames; - pdev->empty_frames = pdev->empty_frames->next; - - pdev->image_read_pos = 0; - pdev->fill_image = 0; - spin_unlock_irqrestore(&pdev->ptrlock, flags); - - PWC_DEBUG_MEMORY("<< %s __leaving__\n", __func__); -} - - -/** - \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers. - */ -int pwc_handle_frame(struct pwc_device *pdev) +struct pwc_frame_buf *pwc_get_next_fill_buf(struct pwc_device *pdev) { - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&pdev->ptrlock, flags); - /* First grab our read_frame; this is removed from all lists, so - we can release the lock after this without problems */ - if (pdev->read_frame != NULL) { - /* This can't theoretically happen */ - PWC_ERROR("Huh? Read frame still in use?\n"); - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; - } - - - if (pdev->full_frames == NULL) { - PWC_ERROR("Woops. No frames ready.\n"); - } - else { - pdev->read_frame = pdev->full_frames; - pdev->full_frames = pdev->full_frames->next; - pdev->read_frame->next = NULL; - } - - if (pdev->read_frame != NULL) { - /* Decompression is a lengthy process, so it's outside of the lock. - This gives the isoc_handler the opportunity to fill more frames - in the mean time. - */ - spin_unlock_irqrestore(&pdev->ptrlock, flags); - ret = pwc_decompress(pdev); - spin_lock_irqsave(&pdev->ptrlock, flags); - - /* We're done with read_buffer, tack it to the end of the empty buffer list */ - if (pdev->empty_frames == NULL) { - pdev->empty_frames = pdev->read_frame; - pdev->empty_frames_tail = pdev->empty_frames; - } - else { - pdev->empty_frames_tail->next = pdev->read_frame; - pdev->empty_frames_tail = pdev->read_frame; - } - pdev->read_frame = NULL; - } - spin_unlock_irqrestore(&pdev->ptrlock, flags); - return ret; -} - -/** - \brief Advance pointers of image buffer (after each user request) -*/ -void pwc_next_image(struct pwc_device *pdev) -{ - pdev->image_used[pdev->fill_image] = 0; - pdev->fill_image = (pdev->fill_image + 1) % pwc_mbufs; -} - -/** - * Print debug information when a frame is discarded because all of our buffer - * is full - */ -static void pwc_frame_dumped(struct pwc_device *pdev) -{ - pdev->vframes_dumped++; - if (pdev->vframe_count < FRAME_LOWMARK) - return; - - if (pdev->vframes_dumped < 20) - PWC_DEBUG_FLOW("Dumping frame %d\n", pdev->vframe_count); - else if (pdev->vframes_dumped == 20) - PWC_DEBUG_FLOW("Dumping frame %d (last message)\n", - pdev->vframe_count); + unsigned long flags = 0; + struct pwc_frame_buf *buf = NULL; + + spin_lock_irqsave(&pdev->queued_bufs_lock, flags); + if (list_empty(&pdev->queued_bufs)) + goto leave; + + buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, list); + list_del(&buf->list); +leave: + spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags); + return buf; } static void pwc_snapshot_button(struct pwc_device *pdev, int down) @@ -575,9 +204,9 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down) #endif } -static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_buf *fbuf) +static void pwc_frame_complete(struct pwc_device *pdev) { - int awake = 0; + struct pwc_frame_buf *fbuf = pdev->fill_buf; /* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus frames on the USB wire after an exposure change. This conditition is @@ -589,7 +218,6 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ if (ptr[1] == 1 && ptr[0] & 0x10) { PWC_TRACE("Hyundai CMOS sensor bug. Dropping frame.\n"); pdev->drop_frames += 2; - pdev->vframes_error++; } if ((ptr[0] ^ pdev->vmirror) & 0x01) { pwc_snapshot_button(pdev, ptr[0] & 0x01); @@ -612,8 +240,7 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ */ if (fbuf->filled == 4) pdev->drop_frames++; - } - else if (pdev->type == 740 || pdev->type == 720) { + } else if (pdev->type == 740 || pdev->type == 720) { unsigned char *ptr = (unsigned char *)fbuf->data; if ((ptr[0] ^ pdev->vmirror) & 0x01) { pwc_snapshot_button(pdev, ptr[0] & 0x01); @@ -621,33 +248,23 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ pdev->vmirror = ptr[0] & 0x03; } - /* In case we were instructed to drop the frame, do so silently. - The buffer pointers are not updated either (but the counters are reset below). - */ - if (pdev->drop_frames > 0) + /* In case we were instructed to drop the frame, do so silently. */ + if (pdev->drop_frames > 0) { pdev->drop_frames--; - else { + } else { /* Check for underflow first */ if (fbuf->filled < pdev->frame_total_size) { PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);" " discarded.\n", fbuf->filled); - pdev->vframes_error++; - } - else { - /* Send only once per EOF */ - awake = 1; /* delay wake_ups */ - - /* Find our next frame to fill. This will always succeed, since we - * nick a frame from either empty or full list, but if we had to - * take it from the full list, it means a frame got dropped. - */ - if (pwc_next_fill_frame(pdev)) - pwc_frame_dumped(pdev); - + } else { + fbuf->vb.v4l2_buf.field = V4L2_FIELD_NONE; + fbuf->vb.v4l2_buf.sequence = pdev->vframe_count; + vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE); + pdev->fill_buf = NULL; + pdev->vsync = 0; } } /* !drop_frames */ pdev->vframe_count++; - return awake; } /* This gets called for the Isochronous pipe (video). This is done in @@ -655,24 +272,20 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_ */ static void pwc_isoc_handler(struct urb *urb) { - struct pwc_device *pdev; + struct pwc_device *pdev = (struct pwc_device *)urb->context; int i, fst, flen; - int awake; - struct pwc_frame_buf *fbuf; - unsigned char *fillptr = NULL, *iso_buf = NULL; + unsigned char *iso_buf = NULL; - awake = 0; - pdev = (struct pwc_device *)urb->context; - if (pdev == NULL) { - PWC_ERROR("isoc_handler() called with NULL device?!\n"); - return; - } - - if (urb->status == -ENOENT || urb->status == -ECONNRESET) { + if (urb->status == -ENOENT || urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN) { PWC_DEBUG_OPEN("URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a"); return; } - if (urb->status != -EINPROGRESS && urb->status != 0) { + + if (pdev->fill_buf == NULL) + pdev->fill_buf = pwc_get_next_fill_buf(pdev); + + if (urb->status != 0) { const char *errmsg; errmsg = "Unknown"; @@ -684,29 +297,21 @@ static void pwc_isoc_handler(struct urb *urb) case -EILSEQ: errmsg = "CRC/Timeout (could be anything)"; break; case -ETIME: errmsg = "Device does not respond"; break; } - PWC_DEBUG_FLOW("pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg); - /* Give up after a number of contiguous errors on the USB bus. - Appearantly something is wrong so we simulate an unplug event. - */ + PWC_ERROR("pwc_isoc_handler() called with status %d [%s].\n", + urb->status, errmsg); + /* Give up after a number of contiguous errors */ if (++pdev->visoc_errors > MAX_ISOC_ERRORS) { - PWC_INFO("Too many ISOC errors, bailing out.\n"); - pdev->error_status = EIO; - awake = 1; - wake_up_interruptible(&pdev->frameq); + PWC_ERROR("Too many ISOC errors, bailing out.\n"); + if (pdev->fill_buf) { + vb2_buffer_done(&pdev->fill_buf->vb, + VB2_BUF_STATE_ERROR); + pdev->fill_buf = NULL; + } } - goto handler_end; // ugly, but practical - } - - fbuf = pdev->fill_frame; - if (fbuf == NULL) { - PWC_ERROR("pwc_isoc_handler without valid fill frame.\n"); - awake = 1; + pdev->vsync = 0; /* Drop the current frame */ goto handler_end; } - else { - fillptr = fbuf->data + fbuf->filled; - } /* Reset ISOC error counter. We did get here, after all. */ pdev->visoc_errors = 0; @@ -720,89 +325,73 @@ static void pwc_isoc_handler(struct urb *urb) fst = urb->iso_frame_desc[i].status; flen = urb->iso_frame_desc[i].actual_length; iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - if (fst == 0) { - if (flen > 0) { /* if valid data... */ - if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */ - pdev->vsync = 2; - - /* ...copy data to frame buffer, if possible */ - if (flen + fbuf->filled > pdev->frame_total_size) { - PWC_DEBUG_FLOW("Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size); - pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */ - pdev->vframes_error++; - } - else { - memmove(fillptr, iso_buf, flen); - fillptr += flen; - } - } + if (fst != 0) { + PWC_ERROR("Iso frame %d has error %d\n", i, fst); + continue; + } + if (flen > 0 && pdev->vsync) { + struct pwc_frame_buf *fbuf = pdev->fill_buf; + + if (pdev->vsync == 1) { + do_gettimeofday(&fbuf->vb.v4l2_buf.timestamp); + pdev->vsync = 2; + } + + if (flen + fbuf->filled > pdev->frame_total_size) { + PWC_ERROR("Frame overflow (%d > %d)\n", + flen + fbuf->filled, + pdev->frame_total_size); + pdev->vsync = 0; /* Let's wait for an EOF */ + } else { + memcpy(fbuf->data + fbuf->filled, iso_buf, + flen); fbuf->filled += flen; - } /* ..flen > 0 */ - - if (flen < pdev->vlast_packet_size) { - /* Shorter packet... We probably have the end of an image-frame; - wake up read() process and let select()/poll() do something. - Decompression is done in user time over there. - */ - if (pdev->vsync == 2) { - if (pwc_rcv_short_packet(pdev, fbuf)) { - awake = 1; - fbuf = pdev->fill_frame; - } - } - fbuf->filled = 0; - fillptr = fbuf->data; + } + } + if (flen < pdev->vlast_packet_size) { + /* Shorter packet... end of frame */ + if (pdev->vsync == 2) + pwc_frame_complete(pdev); + if (pdev->fill_buf == NULL) + pdev->fill_buf = pwc_get_next_fill_buf(pdev); + if (pdev->fill_buf) { + pdev->fill_buf->filled = 0; pdev->vsync = 1; } - - pdev->vlast_packet_size = flen; - } /* ..status == 0 */ - else { - /* This is normally not interesting to the user, unless - * you are really debugging something, default = 0 */ - static int iso_error; - iso_error++; - if (iso_error < 20) - PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst); } + pdev->vlast_packet_size = flen; } handler_end: - if (awake) - wake_up_interruptible(&pdev->frameq); - - urb->dev = pdev->udev; i = usb_submit_urb(urb, GFP_ATOMIC); if (i != 0) PWC_ERROR("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i); } - -int pwc_isoc_init(struct pwc_device *pdev) +static int pwc_isoc_init(struct pwc_device *pdev) { struct usb_device *udev; struct urb *urb; int i, j, ret; - struct usb_interface *intf; struct usb_host_interface *idesc = NULL; - if (pdev == NULL) - return -EFAULT; if (pdev->iso_init) return 0; + pdev->vsync = 0; + pdev->vlast_packet_size = 0; + pdev->fill_buf = NULL; + pdev->vframe_count = 0; + pdev->visoc_errors = 0; udev = pdev->udev; /* Get the current alternate interface, adjust packet size */ - if (!udev->actconfig) - return -EFAULT; intf = usb_ifnum_to_if(udev, 0); if (intf) idesc = usb_altnum_to_altsetting(intf, pdev->valternate); - if (!idesc) - return -EFAULT; + return -EIO; /* Search video endpoint */ pdev->vmax_packet_size = -1; @@ -825,34 +414,32 @@ int pwc_isoc_init(struct pwc_device *pdev) if (ret < 0) return ret; + /* Allocate and init Isochronuous urbs */ for (i = 0; i < MAX_ISO_BUFS; i++) { urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); if (urb == NULL) { PWC_ERROR("Failed to allocate urb %d\n", i); - ret = -ENOMEM; - break; + pdev->iso_init = 1; + pwc_isoc_cleanup(pdev); + return -ENOMEM; } - pdev->sbuf[i].urb = urb; + pdev->urbs[i] = urb; PWC_DEBUG_MEMORY("Allocated URB at 0x%p\n", urb); - } - if (ret) { - /* De-allocate in reverse order */ - while (i--) { - usb_free_urb(pdev->sbuf[i].urb); - pdev->sbuf[i].urb = NULL; - } - return ret; - } - - /* init URB structure */ - for (i = 0; i < MAX_ISO_BUFS; i++) { - urb = pdev->sbuf[i].urb; urb->interval = 1; // devik urb->dev = udev; urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint); - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = pdev->sbuf[i].data; + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->transfer_buffer = usb_alloc_coherent(udev, + ISO_BUFFER_SIZE, + GFP_KERNEL, + &urb->transfer_dma); + if (urb->transfer_buffer == NULL) { + PWC_ERROR("Failed to allocate urb buffer %d\n", i); + pdev->iso_init = 1; + pwc_isoc_cleanup(pdev); + return -ENOMEM; + } urb->transfer_buffer_length = ISO_BUFFER_SIZE; urb->complete = pwc_isoc_handler; urb->context = pdev; @@ -866,14 +453,14 @@ int pwc_isoc_init(struct pwc_device *pdev) /* link */ for (i = 0; i < MAX_ISO_BUFS; i++) { - ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL); + ret = usb_submit_urb(pdev->urbs[i], GFP_KERNEL); if (ret) { PWC_ERROR("isoc_init() submit_urb %d failed with error %d\n", i, ret); pdev->iso_init = 1; pwc_isoc_cleanup(pdev); return ret; } - PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb); + PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->urbs[i]); } /* All is done... */ @@ -888,12 +475,9 @@ static void pwc_iso_stop(struct pwc_device *pdev) /* Unlinking ISOC buffers one by one */ for (i = 0; i < MAX_ISO_BUFS; i++) { - struct urb *urb; - - urb = pdev->sbuf[i].urb; - if (urb) { - PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb); - usb_kill_urb(urb); + if (pdev->urbs[i]) { + PWC_DEBUG_MEMORY("Unlinking URB %p\n", pdev->urbs[i]); + usb_kill_urb(pdev->urbs[i]); } } } @@ -904,40 +488,51 @@ static void pwc_iso_free(struct pwc_device *pdev) /* Freeing ISOC buffers one by one */ for (i = 0; i < MAX_ISO_BUFS; i++) { - struct urb *urb; - - urb = pdev->sbuf[i].urb; - if (urb) { + if (pdev->urbs[i]) { PWC_DEBUG_MEMORY("Freeing URB\n"); - usb_free_urb(urb); - pdev->sbuf[i].urb = NULL; + if (pdev->urbs[i]->transfer_buffer) { + usb_free_coherent(pdev->udev, + pdev->urbs[i]->transfer_buffer_length, + pdev->urbs[i]->transfer_buffer, + pdev->urbs[i]->transfer_dma); + } + usb_free_urb(pdev->urbs[i]); + pdev->urbs[i] = NULL; } } } -void pwc_isoc_cleanup(struct pwc_device *pdev) +static void pwc_isoc_cleanup(struct pwc_device *pdev) { PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n"); - if (pdev == NULL) - return; + if (pdev->iso_init == 0) return; pwc_iso_stop(pdev); pwc_iso_free(pdev); - - /* Stop camera, but only if we are sure the camera is still there (unplug - is signalled by EPIPE) - */ - if (pdev->error_status != EPIPE) { - PWC_DEBUG_OPEN("Setting alternate interface 0.\n"); - usb_set_interface(pdev->udev, 0, 0); - } + usb_set_interface(pdev->udev, 0, 0); pdev->iso_init = 0; PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n"); } +/* + * Release all queued buffers, no need to take queued_bufs_lock, since all + * iso urbs have been killed when we're called so pwc_isoc_handler won't run. + */ +static void pwc_cleanup_queued_bufs(struct pwc_device *pdev) +{ + while (!list_empty(&pdev->queued_bufs)) { + struct pwc_frame_buf *buf; + + buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, + list); + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } +} + /********* * sysfs *********/ @@ -1051,98 +646,15 @@ static const char *pwc_sensor_type_to_string(unsigned int sensor_type) static int pwc_video_open(struct file *file) { - int i, ret; struct video_device *vdev = video_devdata(file); struct pwc_device *pdev; PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev); pdev = video_get_drvdata(vdev); - BUG_ON(!pdev); - if (pdev->vopen) { - PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n"); - return -EBUSY; - } - - pwc_construct(pdev); /* set min/max sizes correct */ - if (!pdev->usb_init) { - PWC_DEBUG_OPEN("Doing first time initialization.\n"); - pdev->usb_init = 1; - - /* Query sensor type */ - ret = pwc_get_cmos_sensor(pdev, &i); - if (ret >= 0) - { - PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n", - pdev->vdev.name, - pwc_sensor_type_to_string(i), i); - } - } - - /* Turn on camera */ - if (power_save) { - i = pwc_camera_power(pdev, 1); - if (i < 0) - PWC_DEBUG_OPEN("Failed to restore power to the camera! (%d)\n", i); - } - /* Set LED on/off time */ - if (pwc_set_leds(pdev, led_on, led_off) < 0) - PWC_DEBUG_OPEN("Failed to set LED on/off time.\n"); - - - /* So far, so good. Allocate memory. */ - i = pwc_allocate_buffers(pdev); - if (i < 0) { - PWC_DEBUG_OPEN("Failed to allocate buffers memory.\n"); - pwc_free_buffers(pdev); - return i; - } - - /* Reset buffers & parameters */ - pwc_reset_buffers(pdev); - for (i = 0; i < pwc_mbufs; i++) - pdev->image_used[i] = 0; - pdev->vframe_count = 0; - pdev->vframes_dumped = 0; - pdev->vframes_error = 0; - pdev->visoc_errors = 0; - pdev->error_status = 0; - pwc_construct(pdev); /* set min/max sizes correct */ - - /* Set some defaults */ - pdev->vsnapshot = 0; - - /* Set video size, first try the last used video size - (or the default one); if that fails try QCIF/10 or QSIF/10; - it that fails too, give up. - */ - i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0); - if (i) { - unsigned int default_resolution; - PWC_DEBUG_OPEN("First attempt at set_video_mode failed.\n"); - if (pdev->type>= 730) - default_resolution = PSZ_QSIF; - else - default_resolution = PSZ_QCIF; - - i = pwc_set_video_mode(pdev, - pwc_image_sizes[default_resolution].x, - pwc_image_sizes[default_resolution].y, - 10, - pdev->vcompression, - 0); - } - if (i) { - PWC_DEBUG_OPEN("Second attempt at set_video_mode failed.\n"); - pwc_free_buffers(pdev); - return i; - } - - /* Initialize the webcam to sane value */ - pwc_set_brightness(pdev, 0x7fff); - pwc_set_agc(pdev, 1, 0); + if (!pdev->udev) + return -ENODEV; - pdev->vopen++; file->private_data = vdev; PWC_DEBUG_OPEN("<< video_open() returns 0.\n"); return 0; @@ -1158,239 +670,211 @@ static void pwc_video_release(struct video_device *vfd) if (device_hint[hint].pdev == pdev) device_hint[hint].pdev = NULL; + /* Free intermediate decompression buffer & tables */ + if (pdev->decompress_data != NULL) { + PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n", + pdev->decompress_data); + kfree(pdev->decompress_data); + pdev->decompress_data = NULL; + } + + v4l2_ctrl_handler_free(&pdev->ctrl_handler); + kfree(pdev); } -/* Note that all cleanup is done in the reverse order as in _open */ static int pwc_video_close(struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); pdev = video_get_drvdata(vdev); - if (pdev->vopen == 0) - PWC_DEBUG_MODULE("video_close() called on closed device?\n"); - - /* Dump statistics, but only if a reasonable amount of frames were - processed (to prevent endless log-entries in case of snap-shot - programs) - */ - if (pdev->vframe_count > 20) - PWC_DEBUG_MODULE("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error); - - if (DEVICE_USE_CODEC1(pdev->type)) - pwc_dec1_exit(); - else - pwc_dec23_exit(); - - pwc_isoc_cleanup(pdev); - pwc_free_buffers(pdev); - - /* Turn off LEDS and power down camera, but only when not unplugged */ - if (!pdev->unplugged) { - /* Turn LEDs off */ - if (pwc_set_leds(pdev, 0, 0) < 0) - PWC_DEBUG_MODULE("Failed to set LED on/off time.\n"); - if (power_save) { - i = pwc_camera_power(pdev, 0); - if (i < 0) - PWC_ERROR("Failed to power down camera (%d)\n", i); - } - pdev->vopen--; - PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); + if (pdev->capt_file == file) { + vb2_queue_release(&pdev->vb_queue); + pdev->capt_file = NULL; } + PWC_DEBUG_OPEN("<< video_close()\n"); return 0; } -/* - * FIXME: what about two parallel reads ???? - * ANSWER: Not supported. You can't open the device more than once, - despite what the V4L1 interface says. First, I don't see - the need, second there's no mechanism of alerting the - 2nd/3rd/... process of events like changing image size. - And I don't see the point of blocking that for the - 2nd/3rd/... process. - In multi-threaded environments reading parallel from any - device is tricky anyhow. - */ - static ssize_t pwc_video_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - int noblock = file->f_flags & O_NONBLOCK; - DECLARE_WAITQUEUE(wait, current); - int bytes_to_read, rv = 0; - void *image_buffer_addr; - - PWC_DEBUG_READ("pwc_video_read(vdev=0x%p, buf=%p, count=%zd) called.\n", - vdev, buf, count); - if (vdev == NULL) - return -EFAULT; - pdev = video_get_drvdata(vdev); - if (pdev == NULL) - return -EFAULT; + struct pwc_device *pdev = video_get_drvdata(vdev); - if (pdev->error_status) { - rv = -pdev->error_status; /* Something happened, report what. */ - goto err_out; - } + if (!pdev->udev) + return -ENODEV; - /* Start the stream (if not already started) */ - rv = pwc_isoc_init(pdev); - if (rv) - goto err_out; - - /* In case we're doing partial reads, we don't have to wait for a frame */ - if (pdev->image_read_pos == 0) { - /* Do wait queueing according to the (doc)book */ - add_wait_queue(&pdev->frameq, &wait); - while (pdev->full_frames == NULL) { - /* Check for unplugged/etc. here */ - if (pdev->error_status) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -pdev->error_status ; - goto err_out; - } - if (noblock) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -EWOULDBLOCK; - goto err_out; - } - if (signal_pending(current)) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - rv = -ERESTARTSYS; - goto err_out; - } - mutex_unlock(&pdev->modlock); - schedule(); - set_current_state(TASK_INTERRUPTIBLE); - mutex_lock(&pdev->modlock); - } - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); + if (pdev->capt_file != NULL && + pdev->capt_file != file) + return -EBUSY; - /* Decompress and release frame */ - if (pwc_handle_frame(pdev)) { - rv = -EFAULT; - goto err_out; - } - } + pdev->capt_file = file; - PWC_DEBUG_READ("Copying data to user space.\n"); - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - bytes_to_read = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - bytes_to_read = pdev->view.size; - - /* copy bytes to user space; we allow for partial reads */ - if (count + pdev->image_read_pos > bytes_to_read) - count = bytes_to_read - pdev->image_read_pos; - image_buffer_addr = pdev->image_data; - image_buffer_addr += pdev->images[pdev->fill_image].offset; - image_buffer_addr += pdev->image_read_pos; - if (copy_to_user(buf, image_buffer_addr, count)) { - rv = -EFAULT; - goto err_out; - } - pdev->image_read_pos += count; - if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */ - pdev->image_read_pos = 0; - pwc_next_image(pdev); - } - return count; -err_out: - return rv; + return vb2_read(&pdev->vb_queue, buf, count, ppos, + file->f_flags & O_NONBLOCK); } static unsigned int pwc_video_poll(struct file *file, poll_table *wait) { struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - int ret; + struct pwc_device *pdev = video_get_drvdata(vdev); - if (vdev == NULL) - return -EFAULT; - pdev = video_get_drvdata(vdev); - if (pdev == NULL) - return -EFAULT; + if (!pdev->udev) + return POLL_ERR; - /* Start the stream (if not already started) */ - ret = pwc_isoc_init(pdev); - if (ret) - return ret; + return vb2_poll(&pdev->vb_queue, file, wait); +} + +static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = file->private_data; + struct pwc_device *pdev = video_get_drvdata(vdev); + + if (pdev->capt_file != file) + return -EBUSY; + + return vb2_mmap(&pdev->vb_queue, vma); +} + +/***************************************************************************/ +/* Videobuf2 operations */ + +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + + if (*nbuffers < MIN_FRAMES) + *nbuffers = MIN_FRAMES; + else if (*nbuffers > MAX_FRAMES) + *nbuffers = MAX_FRAMES; + + *nplanes = 1; - poll_wait(file, &pdev->frameq, wait); - if (pdev->error_status) - return POLLERR; - if (pdev->full_frames != NULL) /* we have frames waiting */ - return (POLLIN | POLLRDNORM); + sizes[0] = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2); return 0; } -static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma) +static int buffer_init(struct vb2_buffer *vb) { - struct video_device *vdev = file->private_data; - struct pwc_device *pdev; - unsigned long start; - unsigned long size; - unsigned long page, pos = 0; - int index; + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); - PWC_DEBUG_MEMORY(">> %s\n", __func__); - pdev = video_get_drvdata(vdev); - size = vma->vm_end - vma->vm_start; - start = vma->vm_start; + /* need vmalloc since frame buffer > 128K */ + buf->data = vzalloc(PWC_FRAME_SIZE); + if (buf->data == NULL) + return -ENOMEM; - /* Find the idx buffer for this mapping */ - for (index = 0; index < pwc_mbufs; index++) { - pos = pdev->images[index].offset; - if ((pos>>PAGE_SHIFT) == vma->vm_pgoff) - break; + return 0; +} + +static int buffer_prepare(struct vb2_buffer *vb) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + + /* Don't allow queing new buffers after device disconnection */ + if (!pdev->udev) + return -ENODEV; + + return 0; +} + +static int buffer_finish(struct vb2_buffer *vb) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + + /* + * Application has called dqbuf and is getting back a buffer we've + * filled, take the pwc data we've stored in buf->data and decompress + * it into a usable format, storing the result in the vb2_buffer + */ + return pwc_decompress(pdev, buf); +} + +static void buffer_cleanup(struct vb2_buffer *vb) +{ + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + + vfree(buf->data); +} + +static void buffer_queue(struct vb2_buffer *vb) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue); + struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb); + unsigned long flags = 0; + + spin_lock_irqsave(&pdev->queued_bufs_lock, flags); + list_add_tail(&buf->list, &pdev->queued_bufs); + spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags); +} + +static int start_streaming(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + + if (!pdev->udev) + return -ENODEV; + + /* Turn on camera and set LEDS on */ + pwc_camera_power(pdev, 1); + if (pdev->power_save) { + /* Restore video mode */ + pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, + pdev->vframes, pdev->vcompression, + pdev->vsnapshot); } - if (index == MAX_IMAGES) - return -EINVAL; - if (index == 0) { - /* - * Special case for v4l1. In v4l1, we map only one big buffer, - * but in v4l2 each buffer is mapped - */ - unsigned long total_size; - total_size = pwc_mbufs * pdev->len_per_image; - if (size != pdev->len_per_image && size != total_size) { - PWC_ERROR("Wrong size (%lu) needed to be len_per_image=%d or total_size=%lu\n", - size, pdev->len_per_image, total_size); - return -EINVAL; - } - } else if (size > pdev->len_per_image) - return -EINVAL; - - vma->vm_flags |= VM_IO; /* from 2.6.9-acX */ - - pos += (unsigned long)pdev->image_data; - while (size > 0) { - page = vmalloc_to_pfn((void *)pos); - if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - if (size > PAGE_SIZE) - size -= PAGE_SIZE; - else - size = 0; + pwc_set_leds(pdev, led_on, led_off); + + return pwc_isoc_init(pdev); +} + +static int stop_streaming(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + + if (pdev->udev) { + pwc_set_leds(pdev, 0, 0); + pwc_camera_power(pdev, 0); + pwc_isoc_cleanup(pdev); } + pwc_cleanup_queued_bufs(pdev); + return 0; } +static void pwc_lock(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + mutex_lock(&pdev->modlock); +} + +static void pwc_unlock(struct vb2_queue *vq) +{ + struct pwc_device *pdev = vb2_get_drv_priv(vq); + mutex_unlock(&pdev->modlock); +} + +static struct vb2_ops pwc_vb_queue_ops = { + .queue_setup = queue_setup, + .buf_init = buffer_init, + .buf_prepare = buffer_prepare, + .buf_finish = buffer_finish, + .buf_cleanup = buffer_cleanup, + .buf_queue = buffer_queue, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, + .wait_prepare = pwc_unlock, + .wait_finish = pwc_lock, +}; + /***************************************************************************/ /* USB functions */ @@ -1406,6 +890,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id int hint, rc; int features = 0; int video_nr = -1; /* default: use next available device */ + int my_power_save = power_save; char serial_number[30], *name; vendor_id = le16_to_cpu(udev->descriptor.idVendor); @@ -1513,6 +998,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id PWC_INFO("Logitech QuickCam 4000 Pro USB webcam detected.\n"); name = "Logitech QuickCam Pro 4000"; type_id = 740; /* CCD sensor */ + if (my_power_save == -1) + my_power_save = 1; break; case 0x08b3: PWC_INFO("Logitech QuickCam Zoom USB webcam detected.\n"); @@ -1523,12 +1010,15 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id PWC_INFO("Logitech QuickCam Zoom (new model) USB webcam detected.\n"); name = "Logitech QuickCam Zoom"; type_id = 740; /* CCD sensor */ - power_save = 1; + if (my_power_save == -1) + my_power_save = 1; break; case 0x08b5: PWC_INFO("Logitech QuickCam Orbit/Sphere USB webcam detected.\n"); name = "Logitech QuickCam Orbit"; type_id = 740; /* CCD sensor */ + if (my_power_save == -1) + my_power_save = 1; features |= FEATURE_MOTOR_PANTILT; break; case 0x08b6: @@ -1583,6 +1073,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id PWC_INFO("Creative Labs Webcam 5 detected.\n"); name = "Creative Labs Webcam 5"; type_id = 730; + if (my_power_save == -1) + my_power_save = 1; break; case 0x4011: PWC_INFO("Creative Labs Webcam Pro Ex detected.\n"); @@ -1640,6 +1132,9 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id else return -ENODEV; /* Not any of the know types; but the list keeps growing. */ + if (my_power_save == -1) + my_power_save = 0; + memset(serial_number, 0, 30); usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29); PWC_DEBUG_PROBE("Device serial number is %s\n", serial_number); @@ -1654,7 +1149,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id return -ENOMEM; } pdev->type = type_id; - pdev->vsize = default_size; pdev->vframes = default_fps; strcpy(pdev->serial, serial_number); pdev->features = features; @@ -1668,13 +1162,26 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pdev->angle_range.tilt_min = -3000; pdev->angle_range.tilt_max = 2500; } + pwc_construct(pdev); /* set min/max sizes correct */ mutex_init(&pdev->modlock); - spin_lock_init(&pdev->ptrlock); + mutex_init(&pdev->udevlock); + spin_lock_init(&pdev->queued_bufs_lock); + INIT_LIST_HEAD(&pdev->queued_bufs); pdev->udev = udev; - init_waitqueue_head(&pdev->frameq); pdev->vcompression = pwc_preferred_compression; + pdev->power_save = my_power_save; + + /* Init videobuf2 queue structure */ + memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue)); + pdev->vb_queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + pdev->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ; + pdev->vb_queue.drv_priv = pdev; + pdev->vb_queue.buf_struct_size = sizeof(struct pwc_frame_buf); + pdev->vb_queue.ops = &pwc_vb_queue_ops; + pdev->vb_queue.mem_ops = &vb2_vmalloc_memops; + vb2_queue_init(&pdev->vb_queue); /* Init video_device structure */ memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template)); @@ -1707,14 +1214,40 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id PWC_DEBUG_PROBE("probe() function returning struct at 0x%p.\n", pdev); usb_set_intfdata(intf, pdev); +#ifdef CONFIG_USB_PWC_DEBUG + /* Query sensor type */ + if (pwc_get_cmos_sensor(pdev, &rc) >= 0) { + PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n", + pdev->vdev.name, + pwc_sensor_type_to_string(rc), rc); + } +#endif + /* Set the leds off */ pwc_set_leds(pdev, 0, 0); + + /* Setup intial videomode */ + rc = pwc_set_video_mode(pdev, pdev->view_max.x, pdev->view_max.y, + pdev->vframes, pdev->vcompression, 0); + if (rc) + goto err_free_mem; + + /* Register controls (and read default values from camera */ + rc = pwc_init_controls(pdev); + if (rc) { + PWC_ERROR("Failed to register v4l2 controls (%d).\n", rc); + goto err_free_mem; + } + + pdev->vdev.ctrl_handler = &pdev->ctrl_handler; + + /* And powerdown the camera until streaming starts */ pwc_camera_power(pdev, 0); rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr); if (rc < 0) { PWC_ERROR("Failed to register as video device (%d).\n", rc); - goto err_free_mem; + goto err_free_controls; } rc = pwc_create_sysfs_files(pdev); if (rc) @@ -1757,7 +1290,10 @@ err_video_unreg: if (hint < MAX_DEV_HINTS) device_hint[hint].pdev = NULL; video_unregister_device(&pdev->vdev); +err_free_controls: + v4l2_ctrl_handler_free(&pdev->ctrl_handler); err_free_mem: + usb_set_intfdata(intf, NULL); kfree(pdev); return rc; } @@ -1767,33 +1303,17 @@ static void usb_pwc_disconnect(struct usb_interface *intf) { struct pwc_device *pdev = usb_get_intfdata(intf); + mutex_lock(&pdev->udevlock); mutex_lock(&pdev->modlock); - usb_set_intfdata (intf, NULL); - if (pdev == NULL) { - PWC_ERROR("pwc_disconnect() Called without private pointer.\n"); - goto disconnect_out; - } - if (pdev->udev == NULL) { - PWC_ERROR("pwc_disconnect() already called for %p\n", pdev); - goto disconnect_out; - } - if (pdev->udev != interface_to_usbdev(intf)) { - PWC_ERROR("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n"); - goto disconnect_out; - } - - /* We got unplugged; this is signalled by an EPIPE error code */ - pdev->error_status = EPIPE; - pdev->unplugged = 1; - - /* Alert waiting processes */ - wake_up_interruptible(&pdev->frameq); + usb_set_intfdata(intf, NULL); /* No need to keep the urbs around after disconnection */ pwc_isoc_cleanup(pdev); + pwc_cleanup_queued_bufs(pdev); + pdev->udev = NULL; -disconnect_out: mutex_unlock(&pdev->modlock); + mutex_unlock(&pdev->udevlock); pwc_remove_sysfs_files(pdev); video_unregister_device(&pdev->vdev); @@ -1809,36 +1329,27 @@ disconnect_out: * Initialization code & module stuff */ -static char *size; static int fps; -static int fbufs; -static int mbufs; static int compression = -1; static int leds[2] = { -1, -1 }; static unsigned int leds_nargs; static char *dev_hint[MAX_DEV_HINTS]; static unsigned int dev_hint_nargs; -module_param(size, charp, 0444); module_param(fps, int, 0444); -module_param(fbufs, int, 0444); -module_param(mbufs, int, 0444); #ifdef CONFIG_USB_PWC_DEBUG module_param_named(trace, pwc_trace, int, 0644); #endif -module_param(power_save, int, 0444); +module_param(power_save, int, 0644); module_param(compression, int, 0444); module_param_array(leds, int, &leds_nargs, 0444); module_param_array(dev_hint, charp, &dev_hint_nargs, 0444); -MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga"); MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30"); -MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve"); -MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers"); #ifdef CONFIG_USB_PWC_DEBUG MODULE_PARM_DESC(trace, "For debugging purposes"); #endif -MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off"); +MODULE_PARM_DESC(power_save, "Turn power saving for new cameras on or off"); MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)"); MODULE_PARM_DESC(leds, "LED on,off time in milliseconds"); MODULE_PARM_DESC(dev_hint, "Device node hints"); @@ -1851,14 +1362,19 @@ MODULE_VERSION( PWC_VERSION ); static int __init usb_pwc_init(void) { - int i, sz; - char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" }; + int i; +#ifdef CONFIG_USB_PWC_DEBUG PWC_INFO("Philips webcam module version " PWC_VERSION " loaded.\n"); PWC_INFO("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n"); PWC_INFO("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n"); PWC_INFO("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n"); + if (pwc_trace >= 0) { + PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace); + } +#endif + if (fps) { if (fps < 4 || fps > 30) { PWC_ERROR("Framerate out of bounds (4-30).\n"); @@ -1868,41 +1384,6 @@ static int __init usb_pwc_init(void) PWC_DEBUG_MODULE("Default framerate set to %d.\n", default_fps); } - if (size) { - /* string; try matching with array */ - for (sz = 0; sz < PSZ_MAX; sz++) { - if (!strcmp(sizenames[sz], size)) { /* Found! */ - default_size = sz; - break; - } - } - if (sz == PSZ_MAX) { - PWC_ERROR("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n"); - return -EINVAL; - } - PWC_DEBUG_MODULE("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y); - } - if (mbufs) { - if (mbufs < 1 || mbufs > MAX_IMAGES) { - PWC_ERROR("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES); - return -EINVAL; - } - pwc_mbufs = mbufs; - PWC_DEBUG_MODULE("Number of image buffers set to %d.\n", pwc_mbufs); - } - if (fbufs) { - if (fbufs < 2 || fbufs > MAX_FRAMES) { - PWC_ERROR("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES); - return -EINVAL; - } - default_fbufs = fbufs; - PWC_DEBUG_MODULE("Number of frame buffers set to %d.\n", default_fbufs); - } -#ifdef CONFIG_USB_PWC_DEBUG - if (pwc_trace >= 0) { - PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace); - } -#endif if (compression >= 0) { if (compression > 3) { PWC_ERROR("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n"); @@ -1911,8 +1392,6 @@ static int __init usb_pwc_init(void) pwc_preferred_compression = compression; PWC_DEBUG_MODULE("Preferred compression set to %d.\n", pwc_preferred_compression); } - if (power_save) - PWC_DEBUG_MODULE("Enabling power save on open/close.\n"); if (leds[0] >= 0) led_on = leds[0]; if (leds[1] >= 0) diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h deleted file mode 100644 index 8c0cae7..0000000 --- a/drivers/media/video/pwc/pwc-ioctl.h +++ /dev/null @@ -1,323 +0,0 @@ -#ifndef PWC_IOCTL_H -#define PWC_IOCTL_H - -/* (C) 2001-2004 Nemosoft Unv. - (C) 2004-2006 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* This is pwc-ioctl.h belonging to PWC 10.0.10 - It contains structures and defines to communicate from user space - directly to the driver. - */ - -/* - Changes - 2001/08/03 Alvarado Added ioctl constants to access methods for - changing white balance and red/blue gains - 2002/12/15 G. H. Fernandez-Toribio VIDIOCGREALSIZE - 2003/12/13 Nemosft Unv. Some modifications to make interfacing to - PWCX easier - */ - -/* These are private ioctl() commands, specific for the Philips webcams. - They contain functions not found in other webcams, and settings not - specified in the Video4Linux API. - - The #define names are built up like follows: - VIDIOC VIDeo IOCtl prefix - PWC Philps WebCam - G optional: Get - S optional: Set - ... the function - */ - -#include <linux/types.h> -#include <linux/version.h> - - /* Enumeration of image sizes */ -#define PSZ_SQCIF 0x00 -#define PSZ_QSIF 0x01 -#define PSZ_QCIF 0x02 -#define PSZ_SIF 0x03 -#define PSZ_CIF 0x04 -#define PSZ_VGA 0x05 -#define PSZ_MAX 6 - - -/* The frame rate is encoded in the video_window.flags parameter using - the upper 16 bits, since some flags are defined nowadays. The following - defines provide a mask and shift to filter out this value. - This value can also be passing using the private flag when using v4l2 and - VIDIOC_S_FMT ioctl. - - In 'Snapshot' mode the camera freezes its automatic exposure and colour - balance controls. - */ -#define PWC_FPS_SHIFT 16 -#define PWC_FPS_MASK 0x00FF0000 -#define PWC_FPS_FRMASK 0x003F0000 -#define PWC_FPS_SNAPSHOT 0x00400000 -#define PWC_QLT_MASK 0x03000000 -#define PWC_QLT_SHIFT 24 - - -/* structure for transferring x & y coordinates */ -struct pwc_coord -{ - int x, y; /* guess what */ - int size; /* size, or offset */ -}; - - -/* Used with VIDIOCPWCPROBE */ -struct pwc_probe -{ - char name[32]; - int type; -}; - -struct pwc_serial -{ - char serial[30]; /* String with serial number. Contains terminating 0 */ -}; - -/* pwc_whitebalance.mode values */ -#define PWC_WB_INDOOR 0 -#define PWC_WB_OUTDOOR 1 -#define PWC_WB_FL 2 -#define PWC_WB_MANUAL 3 -#define PWC_WB_AUTO 4 - -/* Used with VIDIOCPWC[SG]AWB (Auto White Balance). - Set mode to one of the PWC_WB_* values above. - *red and *blue are the respective gains of these colour components inside - the camera; range 0..65535 - When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read; - otherwise undefined. - 'read_red' and 'read_blue' are read-only. -*/ -struct pwc_whitebalance -{ - int mode; - int manual_red, manual_blue; /* R/W */ - int read_red, read_blue; /* R/O */ -}; - -/* - 'control_speed' and 'control_delay' are used in automatic whitebalance mode, - and tell the camera how fast it should react to changes in lighting, and - with how much delay. Valid values are 0..65535. -*/ -struct pwc_wb_speed -{ - int control_speed; - int control_delay; - -}; - -/* Used with VIDIOCPWC[SG]LED */ -struct pwc_leds -{ - int led_on; /* Led on-time; range = 0..25000 */ - int led_off; /* Led off-time; range = 0..25000 */ -}; - -/* Image size (used with GREALSIZE) */ -struct pwc_imagesize -{ - int width; - int height; -}; - -/* Defines and structures for Motorized Pan & Tilt */ -#define PWC_MPT_PAN 0x01 -#define PWC_MPT_TILT 0x02 -#define PWC_MPT_TIMEOUT 0x04 /* for status */ - -/* Set angles; when absolute != 0, the angle is absolute and the - driver calculates the relative offset for you. This can only - be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns - absolute angles. - */ -struct pwc_mpt_angles -{ - int absolute; /* write-only */ - int pan; /* degrees * 100 */ - int tilt; /* degress * 100 */ -}; - -/* Range of angles of the camera, both horizontally and vertically. - */ -struct pwc_mpt_range -{ - int pan_min, pan_max; /* degrees * 100 */ - int tilt_min, tilt_max; -}; - -struct pwc_mpt_status -{ - int status; - int time_pan; - int time_tilt; -}; - - -/* This is used for out-of-kernel decompression. With it, you can get - all the necessary information to initialize and use the decompressor - routines in standalone applications. - */ -struct pwc_video_command -{ - int type; /* camera type (645, 675, 730, etc.) */ - int release; /* release number */ - - int size; /* one of PSZ_* */ - int alternate; - int command_len; /* length of USB video command */ - unsigned char command_buf[13]; /* Actual USB video command */ - int bandlength; /* >0 = compressed */ - int frame_size; /* Size of one (un)compressed frame */ -}; - -/* Flags for PWCX subroutines. Not all modules honour all flags. */ -#define PWCX_FLAG_PLANAR 0x0001 -#define PWCX_FLAG_BAYER 0x0008 - - -/* IOCTL definitions */ - - /* Restore user settings */ -#define VIDIOCPWCRUSER _IO('v', 192) - /* Save user settings */ -#define VIDIOCPWCSUSER _IO('v', 193) - /* Restore factory settings */ -#define VIDIOCPWCFACTORY _IO('v', 194) - - /* You can manipulate the compression factor. A compression preference of 0 - means use uncompressed modes when available; 1 is low compression, 2 is - medium and 3 is high compression preferred. Of course, the higher the - compression, the lower the bandwidth used but more chance of artefacts - in the image. The driver automatically chooses a higher compression when - the preferred mode is not available. - */ - /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */ -#define VIDIOCPWCSCQUAL _IOW('v', 195, int) - /* Get preferred compression quality */ -#define VIDIOCPWCGCQUAL _IOR('v', 195, int) - - -/* Retrieve serial number of camera */ -#define VIDIOCPWCGSERIAL _IOR('v', 198, struct pwc_serial) - - /* This is a probe function; since so many devices are supported, it - becomes difficult to include all the names in programs that want to - check for the enhanced Philips stuff. So in stead, try this PROBE; - it returns a structure with the original name, and the corresponding - Philips type. - To use, fill the structure with zeroes, call PROBE and if that succeeds, - compare the name with that returned from VIDIOCGCAP; they should be the - same. If so, you can be assured it is a Philips (OEM) cam and the type - is valid. - */ -#define VIDIOCPWCPROBE _IOR('v', 199, struct pwc_probe) - - /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */ -#define VIDIOCPWCSAGC _IOW('v', 200, int) - /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCGAGC _IOR('v', 200, int) - /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */ -#define VIDIOCPWCSSHUTTER _IOW('v', 201, int) - - /* Color compensation (Auto White Balance) */ -#define VIDIOCPWCSAWB _IOW('v', 202, struct pwc_whitebalance) -#define VIDIOCPWCGAWB _IOR('v', 202, struct pwc_whitebalance) - - /* Auto WB speed */ -#define VIDIOCPWCSAWBSPEED _IOW('v', 203, struct pwc_wb_speed) -#define VIDIOCPWCGAWBSPEED _IOR('v', 203, struct pwc_wb_speed) - - /* LEDs on/off/blink; int range 0..65535 */ -#define VIDIOCPWCSLED _IOW('v', 205, struct pwc_leds) -#define VIDIOCPWCGLED _IOR('v', 205, struct pwc_leds) - - /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */ -#define VIDIOCPWCSCONTOUR _IOW('v', 206, int) -#define VIDIOCPWCGCONTOUR _IOR('v', 206, int) - - /* Backlight compensation; 0 = off, otherwise on */ -#define VIDIOCPWCSBACKLIGHT _IOW('v', 207, int) -#define VIDIOCPWCGBACKLIGHT _IOR('v', 207, int) - - /* Flickerless mode; = 0 off, otherwise on */ -#define VIDIOCPWCSFLICKER _IOW('v', 208, int) -#define VIDIOCPWCGFLICKER _IOR('v', 208, int) - - /* Dynamic noise reduction; 0 off, 3 = high noise reduction */ -#define VIDIOCPWCSDYNNOISE _IOW('v', 209, int) -#define VIDIOCPWCGDYNNOISE _IOR('v', 209, int) - - /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */ -#define VIDIOCPWCGREALSIZE _IOR('v', 210, struct pwc_imagesize) - - /* Motorized pan & tilt functions */ -#define VIDIOCPWCMPTRESET _IOW('v', 211, int) -#define VIDIOCPWCMPTGRANGE _IOR('v', 211, struct pwc_mpt_range) -#define VIDIOCPWCMPTSANGLE _IOW('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTGANGLE _IOR('v', 212, struct pwc_mpt_angles) -#define VIDIOCPWCMPTSTATUS _IOR('v', 213, struct pwc_mpt_status) - - /* Get the USB set-video command; needed for initializing libpwcx */ -#define VIDIOCPWCGVIDCMD _IOR('v', 215, struct pwc_video_command) -struct pwc_table_init_buffer { - int len; - char *buffer; - -}; -#define VIDIOCPWCGVIDTABLE _IOR('v', 216, struct pwc_table_init_buffer) - -/* - * This is private command used when communicating with v4l2. - * In the future all private ioctl will be remove/replace to - * use interface offer by v4l2. - */ - -#define V4L2_CID_PRIVATE_SAVE_USER (V4L2_CID_PRIVATE_BASE + 0) -#define V4L2_CID_PRIVATE_RESTORE_USER (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_PRIVATE_COLOUR_MODE (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_PRIVATE_AUTOCONTOUR (V4L2_CID_PRIVATE_BASE + 4) -#define V4L2_CID_PRIVATE_CONTOUR (V4L2_CID_PRIVATE_BASE + 5) -#define V4L2_CID_PRIVATE_BACKLIGHT (V4L2_CID_PRIVATE_BASE + 6) -#define V4L2_CID_PRIVATE_FLICKERLESS (V4L2_CID_PRIVATE_BASE + 7) -#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8) - -struct pwc_raw_frame { - __le16 type; /* type of the webcam */ - __le16 vbandlength; /* Size of 4lines compressed (used by the decompressor) */ - __u8 cmd[4]; /* the four byte of the command (in case of nala, - only the first 3 bytes is filled) */ - __u8 rawframe[0]; /* frame_size = H/4*vbandlength */ -} __attribute__ ((packed)); - - -#endif diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c index f4ae83c..e5f4fd8 100644 --- a/drivers/media/video/pwc/pwc-kiara.c +++ b/drivers/media/video/pwc/pwc-kiara.c @@ -40,7 +40,6 @@ #include "pwc-kiara.h" -#include "pwc-uncompress.h" const unsigned int Kiara_fps_vector[PWC_FPS_MAX_KIARA] = { 5, 10, 15, 20, 25, 30 }; diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c index 6af5bb5..0b03133 100644 --- a/drivers/media/video/pwc/pwc-misc.c +++ b/drivers/media/video/pwc/pwc-misc.c @@ -126,8 +126,4 @@ void pwc_construct(struct pwc_device *pdev) pdev->pixfmt = V4L2_PIX_FMT_YUV420; /* default */ pdev->view_min.size = pdev->view_min.x * pdev->view_min.y; pdev->view_max.size = pdev->view_max.x * pdev->view_max.y; - /* length of image, in YUV format; always allocate enough memory. */ - pdev->len_per_image = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2); } - - diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c index 3b73f29..5126509 100644 --- a/drivers/media/video/pwc/pwc-uncompress.c +++ b/drivers/media/video/pwc/pwc-uncompress.c @@ -30,26 +30,17 @@ #include <asm/types.h> #include "pwc.h" -#include "pwc-uncompress.h" #include "pwc-dec1.h" #include "pwc-dec23.h" -int pwc_decompress(struct pwc_device *pdev) +int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf) { - struct pwc_frame_buf *fbuf; int n, line, col, stride; void *yuv, *image; u16 *src; u16 *dsty, *dstu, *dstv; - if (pdev == NULL) - return -EFAULT; - - fbuf = pdev->read_frame; - if (fbuf == NULL) - return -EFAULT; - image = pdev->image_data; - image += pdev->images[pdev->fill_image].offset; + image = vb2_plane_vaddr(&fbuf->vb, 0); yuv = fbuf->data + pdev->frame_header_size; /* Skip header */ @@ -64,9 +55,13 @@ int pwc_decompress(struct pwc_device *pdev) * determine this using the type of the webcam */ memcpy(raw_frame->cmd, pdev->cmd_buf, 4); memcpy(raw_frame+1, yuv, pdev->frame_size); + vb2_set_plane_payload(&fbuf->vb, 0, + pdev->frame_size + sizeof(struct pwc_raw_frame)); return 0; } + vb2_set_plane_payload(&fbuf->vb, 0, pdev->view.size); + if (pdev->vbandlength == 0) { /* Uncompressed mode. * We copy the data into the output buffer, using the viewport diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h deleted file mode 100644 index 43028e7..0000000 --- a/drivers/media/video/pwc/pwc-uncompress.h +++ /dev/null @@ -1,40 +0,0 @@ -/* (C) 1999-2003 Nemosoft Unv. - (C) 2004-2006 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -/* This file is the bridge between the kernel module and the plugin; it - describes the structures and datatypes used in both modules. Any - significant change should be reflected by increasing the - pwc_decompressor_version major number. - */ -#ifndef PWC_UNCOMPRESS_H -#define PWC_UNCOMPRESS_H - - -#include <media/pwc-ioctl.h> - -/* from pwc-dec.h */ -#define PWCX_FLAG_PLANAR 0x0001 -/* */ - -#endif diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c index f85c512..e9a0e94 100644 --- a/drivers/media/video/pwc/pwc-v4l.c +++ b/drivers/media/video/pwc/pwc-v4l.c @@ -2,6 +2,7 @@ USB and Video4Linux interface part. (C) 1999-2004 Nemosoft Unv. (C) 2004-2006 Luc Saillard (luc@saillard.org) + (C) 2011 Hans de Goede <hdegoede@redhat.com> NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx driver and thus may have bugs that are not present in the original version. @@ -31,184 +32,330 @@ #include <linux/module.h> #include <linux/poll.h> #include <linux/vmalloc.h> +#include <linux/jiffies.h> #include <asm/io.h> #include "pwc.h" -static struct v4l2_queryctrl pwc_controls[] = { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = 0, - .maximum = 128, - .step = 1, - .default_value = 64, - }, - { - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0, - .maximum = 64, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_SATURATION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", - .minimum = -100, - .maximum = 100, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_GAMMA, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gamma", - .minimum = 0, - .maximum = 32, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_RED_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Red Gain", - .minimum = 0, - .maximum = 256, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_BLUE_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Blue Gain", - .minimum = 0, - .maximum = 256, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_AUTO_WHITE_BALANCE, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Auto White Balance", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_EXPOSURE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Shutter Speed (Exposure)", - .minimum = 0, - .maximum = 256, - .step = 1, - .default_value = 200, - }, - { - .id = V4L2_CID_AUTOGAIN, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Auto Gain Enabled", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 1, - }, - { - .id = V4L2_CID_GAIN, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Gain Level", - .minimum = 0, - .maximum = 256, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_SAVE_USER, - .type = V4L2_CTRL_TYPE_BUTTON, - .name = "Save User Settings", - .minimum = 0, - .maximum = 0, - .step = 0, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_RESTORE_USER, - .type = V4L2_CTRL_TYPE_BUTTON, - .name = "Restore User Settings", - .minimum = 0, - .maximum = 0, - .step = 0, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_RESTORE_FACTORY, - .type = V4L2_CTRL_TYPE_BUTTON, - .name = "Restore Factory Settings", - .minimum = 0, - .maximum = 0, - .step = 0, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_COLOUR_MODE, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Colour mode", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_AUTOCONTOUR, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Auto contour", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_CONTOUR, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contour", - .minimum = 0, - .maximum = 63, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_BACKLIGHT, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Backlight compensation", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_FLICKERLESS, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Flickerless", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 0, - }, - { - .id = V4L2_CID_PRIVATE_NOISE_REDUCTION, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Noise reduction", - .minimum = 0, - .maximum = 3, - .step = 1, - .default_value = 0, - }, +#define PWC_CID_CUSTOM(ctrl) ((V4L2_CID_USER_BASE | 0xf000) + custom_ ## ctrl) + +static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl); +static int pwc_s_ctrl(struct v4l2_ctrl *ctrl); + +static const struct v4l2_ctrl_ops pwc_ctrl_ops = { + .g_volatile_ctrl = pwc_g_volatile_ctrl, + .s_ctrl = pwc_s_ctrl, +}; + +enum { awb_indoor, awb_outdoor, awb_fl, awb_manual, awb_auto }; +enum { custom_autocontour, custom_contour, custom_noise_reduction, + custom_save_user, custom_restore_user, custom_restore_factory }; + +const char * const pwc_auto_whitebal_qmenu[] = { + "Indoor (Incandescant Lighting) Mode", + "Outdoor (Sunlight) Mode", + "Indoor (Fluorescent Lighting) Mode", + "Manual Mode", + "Auto Mode", + NULL +}; + +static const struct v4l2_ctrl_config pwc_auto_white_balance_cfg = { + .ops = &pwc_ctrl_ops, + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_MENU, + .max = awb_auto, + .qmenu = pwc_auto_whitebal_qmenu, +}; + +static const struct v4l2_ctrl_config pwc_autocontour_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(autocontour), + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto contour", + .min = 0, + .max = 1, + .step = 1, +}; + +static const struct v4l2_ctrl_config pwc_contour_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(contour), + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contour", + .min = 0, + .max = 63, + .step = 1, +}; + +static const struct v4l2_ctrl_config pwc_backlight_cfg = { + .ops = &pwc_ctrl_ops, + .id = V4L2_CID_BACKLIGHT_COMPENSATION, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, +}; + +static const struct v4l2_ctrl_config pwc_flicker_cfg = { + .ops = &pwc_ctrl_ops, + .id = V4L2_CID_BAND_STOP_FILTER, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .step = 1, +}; + +static const struct v4l2_ctrl_config pwc_noise_reduction_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(noise_reduction), + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Dynamic Noise Reduction", + .min = 0, + .max = 3, + .step = 1, +}; + +static const struct v4l2_ctrl_config pwc_save_user_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(save_user), + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Save User Settings", }; +static const struct v4l2_ctrl_config pwc_restore_user_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(restore_user), + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Restore User Settings", +}; + +static const struct v4l2_ctrl_config pwc_restore_factory_cfg = { + .ops = &pwc_ctrl_ops, + .id = PWC_CID_CUSTOM(restore_factory), + .type = V4L2_CTRL_TYPE_BUTTON, + .name = "Restore Factory Settings", +}; + +int pwc_init_controls(struct pwc_device *pdev) +{ + struct v4l2_ctrl_handler *hdl; + struct v4l2_ctrl_config cfg; + int r, def; + + hdl = &pdev->ctrl_handler; + r = v4l2_ctrl_handler_init(hdl, 20); + if (r) + return r; + + /* Brightness, contrast, saturation, gamma */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, BRIGHTNESS_FORMATTER, &def); + if (r || def > 127) + def = 63; + pdev->brightness = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 127, 1, def); + + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, CONTRAST_FORMATTER, &def); + if (r || def > 63) + def = 31; + pdev->contrast = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, def); + + if (pdev->type >= 675) { + if (pdev->type < 730) + pdev->saturation_fmt = SATURATION_MODE_FORMATTER2; + else + pdev->saturation_fmt = SATURATION_MODE_FORMATTER1; + r = pwc_get_s8_ctrl(pdev, GET_CHROM_CTL, pdev->saturation_fmt, + &def); + if (r || def < -100 || def > 100) + def = 0; + pdev->saturation = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_SATURATION, -100, 100, 1, def); + } + + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, GAMMA_FORMATTER, &def); + if (r || def > 31) + def = 15; + pdev->gamma = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_GAMMA, 0, 31, 1, def); + + /* auto white balance, red gain, blue gain */ + r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, WB_MODE_FORMATTER, &def); + if (r || def > awb_auto) + def = awb_auto; + cfg = pwc_auto_white_balance_cfg; + cfg.name = v4l2_ctrl_get_name(cfg.id); + cfg.def = def; + pdev->auto_white_balance = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + /* check auto controls to avoid NULL deref in v4l2_ctrl_auto_cluster */ + if (!pdev->auto_white_balance) + return hdl->error; + + r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, + PRESET_MANUAL_RED_GAIN_FORMATTER, &def); + if (r) + def = 127; + pdev->red_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_RED_BALANCE, 0, 255, 1, def); + + r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, + PRESET_MANUAL_BLUE_GAIN_FORMATTER, &def); + if (r) + def = 127; + pdev->blue_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_BLUE_BALANCE, 0, 255, 1, def); + + v4l2_ctrl_auto_cluster(3, &pdev->auto_white_balance, awb_manual, + pdev->auto_white_balance->cur.val == awb_auto); + + /* autogain, gain */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AGC_MODE_FORMATTER, &def); + if (r || (def != 0 && def != 0xff)) + def = 0; + /* Note a register value if 0 means auto gain is on */ + pdev->autogain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, def == 0); + if (!pdev->autogain) + return hdl->error; + + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_AGC_FORMATTER, &def); + if (r || def > 63) + def = 31; + pdev->gain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_GAIN, 0, 63, 1, def); + + /* auto exposure, exposure */ + if (DEVICE_USE_CODEC2(pdev->type)) { + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, SHUTTER_MODE_FORMATTER, + &def); + if (r || (def != 0 && def != 0xff)) + def = 0; + /* + * def = 0 auto, def = ff manual + * menu idx 0 = auto, idx 1 = manual + */ + pdev->exposure_auto = v4l2_ctrl_new_std_menu(hdl, + &pwc_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, + 1, 0, def != 0); + if (!pdev->exposure_auto) + return hdl->error; + + /* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */ + r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL, + READ_SHUTTER_FORMATTER, &def); + if (r || def > 655) + def = 655; + pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 655, 1, def); + /* CODEC2: separate auto gain & auto exposure */ + v4l2_ctrl_auto_cluster(2, &pdev->autogain, 0, true); + v4l2_ctrl_auto_cluster(2, &pdev->exposure_auto, + V4L2_EXPOSURE_MANUAL, true); + } else if (DEVICE_USE_CODEC3(pdev->type)) { + /* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */ + r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL, + READ_SHUTTER_FORMATTER, &def); + if (r || def > 255) + def = 255; + pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_EXPOSURE, 0, 255, 1, def); + /* CODEC3: both gain and exposure controlled by autogain */ + pdev->autogain_expo_cluster[0] = pdev->autogain; + pdev->autogain_expo_cluster[1] = pdev->gain; + pdev->autogain_expo_cluster[2] = pdev->exposure; + v4l2_ctrl_auto_cluster(3, pdev->autogain_expo_cluster, + 0, true); + } + + /* color / bw setting */ + r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, COLOUR_MODE_FORMATTER, + &def); + if (r || (def != 0 && def != 0xff)) + def = 0xff; + /* def = 0 bw, def = ff color, menu idx 0 = color, idx 1 = bw */ + pdev->colorfx = v4l2_ctrl_new_std_menu(hdl, &pwc_ctrl_ops, + V4L2_CID_COLORFX, 1, 0, def == 0); + + /* autocontour, contour */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &def); + if (r || (def != 0 && def != 0xff)) + def = 0; + cfg = pwc_autocontour_cfg; + cfg.def = def == 0; + pdev->autocontour = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + if (!pdev->autocontour) + return hdl->error; + + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &def); + if (r || def > 63) + def = 31; + cfg = pwc_contour_cfg; + cfg.def = def; + pdev->contour = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + + v4l2_ctrl_auto_cluster(2, &pdev->autocontour, 0, false); + + /* backlight */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, + BACK_LIGHT_COMPENSATION_FORMATTER, &def); + if (r || (def != 0 && def != 0xff)) + def = 0; + cfg = pwc_backlight_cfg; + cfg.name = v4l2_ctrl_get_name(cfg.id); + cfg.def = def == 0; + pdev->backlight = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + + /* flikker rediction */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, + FLICKERLESS_MODE_FORMATTER, &def); + if (r || (def != 0 && def != 0xff)) + def = 0; + cfg = pwc_flicker_cfg; + cfg.name = v4l2_ctrl_get_name(cfg.id); + cfg.def = def == 0; + pdev->flicker = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + + /* Dynamic noise reduction */ + r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, + DYNAMIC_NOISE_CONTROL_FORMATTER, &def); + if (r || def > 3) + def = 2; + cfg = pwc_noise_reduction_cfg; + cfg.def = def; + pdev->noise_reduction = v4l2_ctrl_new_custom(hdl, &cfg, NULL); + + /* Save / Restore User / Factory Settings */ + pdev->save_user = v4l2_ctrl_new_custom(hdl, &pwc_save_user_cfg, NULL); + pdev->restore_user = v4l2_ctrl_new_custom(hdl, &pwc_restore_user_cfg, + NULL); + if (pdev->restore_user) + pdev->restore_user->flags = V4L2_CTRL_FLAG_UPDATE; + pdev->restore_factory = v4l2_ctrl_new_custom(hdl, + &pwc_restore_factory_cfg, + NULL); + if (pdev->restore_factory) + pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE; + + if (!pdev->features & FEATURE_MOTOR_PANTILT) + return hdl->error; + + /* Motor pan / tilt / reset */ + pdev->motor_pan = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_PAN_RELATIVE, -4480, 4480, 64, 0); + if (!pdev->motor_pan) + return hdl->error; + pdev->motor_tilt = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_TILT_RELATIVE, -1920, 1920, 64, 0); + pdev->motor_pan_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_PAN_RESET, 0, 0, 0, 0); + pdev->motor_tilt_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops, + V4L2_CID_TILT_RESET, 0, 0, 0, 0); + v4l2_ctrl_cluster(4, &pdev->motor_pan); + + return hdl->error; +} static void pwc_vidioc_fill_fmt(const struct pwc_device *pdev, struct v4l2_format *f) { @@ -284,10 +431,21 @@ static int pwc_vidioc_try_fmt(struct pwc_device *pdev, struct v4l2_format *f) } /* ioctl(VIDIOC_SET_FMT) */ -static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f) + +static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) { + struct pwc_device *pdev = video_drvdata(file); int ret, fps, snapshot, compression, pixelformat; + if (!pdev->udev) + return -ENODEV; + + if (pdev->capt_file != NULL && + pdev->capt_file != file) + return -EBUSY; + + pdev->capt_file = file; + ret = pwc_vidioc_try_fmt(pdev, f); if (ret<0) return ret; @@ -309,7 +467,7 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f) pixelformat != V4L2_PIX_FMT_PWC2) return -EINVAL; - if (pdev->iso_init) + if (vb2_is_streaming(&pdev->vb_queue)) return -EBUSY; PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d " @@ -343,13 +501,14 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f) static int pwc_querycap(struct file *file, void *fh, struct v4l2_capability *cap) { - struct video_device *vdev = video_devdata(file); struct pwc_device *pdev = video_drvdata(file); + if (!pdev->udev) + return -ENODEV; + strcpy(cap->driver, PWC_NAME); - strlcpy(cap->card, vdev->name, sizeof(cap->card)); + strlcpy(cap->card, pdev->vdev.name, sizeof(cap->card)); usb_make_path(pdev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = PWC_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | @@ -377,255 +536,396 @@ static int pwc_s_input(struct file *file, void *fh, unsigned int i) return i ? -EINVAL : 0; } -static int pwc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *c) +static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl) { - int i, idx; - u32 id; - - id = c->id; - if (id & V4L2_CTRL_FLAG_NEXT_CTRL) { - id &= V4L2_CTRL_ID_MASK; - id++; - idx = -1; - for (i = 0; i < ARRAY_SIZE(pwc_controls); i++) { - if (pwc_controls[i].id < id) - continue; - if (idx >= 0 - && pwc_controls[i].id > pwc_controls[idx].id) - continue; - idx = i; + struct pwc_device *pdev = + container_of(ctrl->handler, struct pwc_device, ctrl_handler); + int ret = 0; + + /* + * Sometimes it can take quite long for the pwc to complete usb control + * transfers, so release the modlock to give streaming by another + * process / thread the chance to continue with a dqbuf. + */ + mutex_unlock(&pdev->modlock); + + /* + * Take the udev-lock to protect against the disconnect handler + * completing and setting dev->udev to NULL underneath us. Other code + * does not need to do this since it is protected by the modlock. + */ + mutex_lock(&pdev->udevlock); + + if (!pdev->udev) { + ret = -ENODEV; + goto leave; + } + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + if (pdev->color_bal_valid && time_before(jiffies, + pdev->last_color_bal_update + HZ / 4)) { + pdev->red_balance->val = pdev->last_red_balance; + pdev->blue_balance->val = pdev->last_blue_balance; + break; } - if (idx < 0) - return -EINVAL; - memcpy(c, &pwc_controls[idx], sizeof pwc_controls[0]); - return 0; + ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_RED_GAIN_FORMATTER, + &pdev->red_balance->val); + if (ret) + break; + ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_BLUE_GAIN_FORMATTER, + &pdev->blue_balance->val); + if (ret) + break; + pdev->last_red_balance = pdev->red_balance->val; + pdev->last_blue_balance = pdev->blue_balance->val; + pdev->last_color_bal_update = jiffies; + pdev->color_bal_valid = true; + break; + case V4L2_CID_AUTOGAIN: + if (pdev->gain_valid && time_before(jiffies, + pdev->last_gain_update + HZ / 4)) { + pdev->gain->val = pdev->last_gain; + break; + } + ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_AGC_FORMATTER, &pdev->gain->val); + if (ret) + break; + pdev->last_gain = pdev->gain->val; + pdev->last_gain_update = jiffies; + pdev->gain_valid = true; + if (!DEVICE_USE_CODEC3(pdev->type)) + break; + /* Fall through for CODEC3 where autogain also controls expo */ + case V4L2_CID_EXPOSURE_AUTO: + if (pdev->exposure_valid && time_before(jiffies, + pdev->last_exposure_update + HZ / 4)) { + pdev->exposure->val = pdev->last_exposure; + break; + } + ret = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL, + READ_SHUTTER_FORMATTER, + &pdev->exposure->val); + if (ret) + break; + pdev->last_exposure = pdev->exposure->val; + pdev->last_exposure_update = jiffies; + pdev->exposure_valid = true; + break; + default: + ret = -EINVAL; } - for (i = 0; i < sizeof(pwc_controls) / sizeof(struct v4l2_queryctrl); i++) { - if (pwc_controls[i].id == c->id) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) found\n"); - memcpy(c, &pwc_controls[i], sizeof(struct v4l2_queryctrl)); - return 0; + + if (ret) + PWC_ERROR("g_ctrl %s error %d\n", ctrl->name, ret); + +leave: + mutex_unlock(&pdev->udevlock); + mutex_lock(&pdev->modlock); + return ret; +} + +static int pwc_set_awb(struct pwc_device *pdev) +{ + int ret = 0; + + if (pdev->auto_white_balance->is_new) { + ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL, + WB_MODE_FORMATTER, + pdev->auto_white_balance->val); + if (ret) + return ret; + + /* Update val when coming from auto or going to a preset */ + if (pdev->red_balance->is_volatile || + pdev->auto_white_balance->val == awb_indoor || + pdev->auto_white_balance->val == awb_outdoor || + pdev->auto_white_balance->val == awb_fl) { + if (!pdev->red_balance->is_new) + pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_RED_GAIN_FORMATTER, + &pdev->red_balance->val); + if (!pdev->blue_balance->is_new) + pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_BLUE_GAIN_FORMATTER, + &pdev->blue_balance->val); + } + if (pdev->auto_white_balance->val == awb_auto) { + pdev->red_balance->is_volatile = true; + pdev->blue_balance->is_volatile = true; + pdev->color_bal_valid = false; /* Force cache update */ + } else { + pdev->red_balance->is_volatile = false; + pdev->blue_balance->is_volatile = false; } } - return -EINVAL; + + if (ret == 0 && pdev->red_balance->is_new) { + if (pdev->auto_white_balance->val != awb_manual) + return -EBUSY; + ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL, + PRESET_MANUAL_RED_GAIN_FORMATTER, + pdev->red_balance->val); + } + + if (ret == 0 && pdev->blue_balance->is_new) { + if (pdev->auto_white_balance->val != awb_manual) + return -EBUSY; + ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL, + PRESET_MANUAL_BLUE_GAIN_FORMATTER, + pdev->blue_balance->val); + } + return ret; } -static int pwc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c) +/* For CODEC2 models which have separate autogain and auto exposure */ +static int pwc_set_autogain(struct pwc_device *pdev) { - struct pwc_device *pdev = video_drvdata(file); - int ret; + int ret = 0; + + if (pdev->autogain->is_new) { + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + AGC_MODE_FORMATTER, + pdev->autogain->val ? 0 : 0xff); + if (ret) + return ret; + if (pdev->autogain->val) + pdev->gain_valid = false; /* Force cache update */ + else if (!pdev->gain->is_new) + pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_AGC_FORMATTER, + &pdev->gain->val); + } + if (ret == 0 && pdev->gain->is_new) { + if (pdev->autogain->val) + return -EBUSY; + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + PRESET_AGC_FORMATTER, + pdev->gain->val); + } + return ret; +} - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value = pwc_get_brightness(pdev); - if (c->value < 0) - return -EINVAL; - return 0; - case V4L2_CID_CONTRAST: - c->value = pwc_get_contrast(pdev); - if (c->value < 0) - return -EINVAL; - return 0; - case V4L2_CID_SATURATION: - ret = pwc_get_saturation(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_GAMMA: - c->value = pwc_get_gamma(pdev); - if (c->value < 0) - return -EINVAL; - return 0; - case V4L2_CID_RED_BALANCE: - ret = pwc_get_red_gain(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_BLUE_BALANCE: - ret = pwc_get_blue_gain(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_AUTO_WHITE_BALANCE: - ret = pwc_get_awb(pdev); - if (ret < 0) - return -EINVAL; - c->value = (ret == PWC_WB_MANUAL) ? 0 : 1; - return 0; - case V4L2_CID_GAIN: - ret = pwc_get_agc(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value >>= 8; - return 0; - case V4L2_CID_AUTOGAIN: - ret = pwc_get_agc(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value = (c->value < 0) ? 1 : 0; - return 0; - case V4L2_CID_EXPOSURE: - ret = pwc_get_shutter_speed(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_COLOUR_MODE: - ret = pwc_get_colour_mode(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_AUTOCONTOUR: - ret = pwc_get_contour(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value = (c->value == -1 ? 1 : 0); - return 0; - case V4L2_CID_PRIVATE_CONTOUR: - ret = pwc_get_contour(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value >>= 10; - return 0; - case V4L2_CID_PRIVATE_BACKLIGHT: - ret = pwc_get_backlight(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_FLICKERLESS: - ret = pwc_get_flicker(pdev, &c->value); - if (ret < 0) - return -EINVAL; - c->value = (c->value ? 1 : 0); - return 0; - case V4L2_CID_PRIVATE_NOISE_REDUCTION: - ret = pwc_get_dynamic_noise(pdev, &c->value); - if (ret < 0) - return -EINVAL; - return 0; +/* For CODEC2 models which have separate autogain and auto exposure */ +static int pwc_set_exposure_auto(struct pwc_device *pdev) +{ + int ret = 0; + int is_auto = pdev->exposure_auto->val == V4L2_EXPOSURE_AUTO; + + if (pdev->exposure_auto->is_new) { + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + SHUTTER_MODE_FORMATTER, + is_auto ? 0 : 0xff); + if (ret) + return ret; + if (is_auto) + pdev->exposure_valid = false; /* Force cache update */ + else if (!pdev->exposure->is_new) + pwc_get_u16_ctrl(pdev, GET_STATUS_CTL, + READ_SHUTTER_FORMATTER, + &pdev->exposure->val); + } + if (ret == 0 && pdev->exposure->is_new) { + if (is_auto) + return -EBUSY; + ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL, + PRESET_SHUTTER_FORMATTER, + pdev->exposure->val); + } + return ret; +} - case V4L2_CID_PRIVATE_SAVE_USER: - case V4L2_CID_PRIVATE_RESTORE_USER: - case V4L2_CID_PRIVATE_RESTORE_FACTORY: - return -EINVAL; +/* For CODEC3 models which have autogain controlling both gain and exposure */ +static int pwc_set_autogain_expo(struct pwc_device *pdev) +{ + int ret = 0; + + if (pdev->autogain->is_new) { + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + AGC_MODE_FORMATTER, + pdev->autogain->val ? 0 : 0xff); + if (ret) + return ret; + if (pdev->autogain->val) { + pdev->gain_valid = false; /* Force cache update */ + pdev->exposure_valid = false; /* Force cache update */ + } else { + if (!pdev->gain->is_new) + pwc_get_u8_ctrl(pdev, GET_STATUS_CTL, + READ_AGC_FORMATTER, + &pdev->gain->val); + if (!pdev->exposure->is_new) + pwc_get_u16_ctrl(pdev, GET_STATUS_CTL, + READ_SHUTTER_FORMATTER, + &pdev->exposure->val); + } } - return -EINVAL; + if (ret == 0 && pdev->gain->is_new) { + if (pdev->autogain->val) + return -EBUSY; + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + PRESET_AGC_FORMATTER, + pdev->gain->val); + } + if (ret == 0 && pdev->exposure->is_new) { + if (pdev->autogain->val) + return -EBUSY; + ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL, + PRESET_SHUTTER_FORMATTER, + pdev->exposure->val); + } + return ret; } -static int pwc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) +static int pwc_set_motor(struct pwc_device *pdev) { - struct pwc_device *pdev = video_drvdata(file); int ret; + u8 buf[4]; + + buf[0] = 0; + if (pdev->motor_pan_reset->is_new) + buf[0] |= 0x01; + if (pdev->motor_tilt_reset->is_new) + buf[0] |= 0x02; + if (pdev->motor_pan_reset->is_new || pdev->motor_tilt_reset->is_new) { + ret = send_control_msg(pdev, SET_MPT_CTL, + PT_RESET_CONTROL_FORMATTER, buf, 1); + if (ret < 0) + return ret; + } - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value <<= 9; - ret = pwc_set_brightness(pdev, c->value); + memset(buf, 0, sizeof(buf)); + if (pdev->motor_pan->is_new) { + buf[0] = pdev->motor_pan->val & 0xFF; + buf[1] = (pdev->motor_pan->val >> 8); + } + if (pdev->motor_tilt->is_new) { + buf[2] = pdev->motor_tilt->val & 0xFF; + buf[3] = (pdev->motor_tilt->val >> 8); + } + if (pdev->motor_pan->is_new || pdev->motor_tilt->is_new) { + ret = send_control_msg(pdev, SET_MPT_CTL, + PT_RELATIVE_CONTROL_FORMATTER, + buf, sizeof(buf)); if (ret < 0) - return -EINVAL; - return 0; + return ret; + } + + return 0; +} + +static int pwc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct pwc_device *pdev = + container_of(ctrl->handler, struct pwc_device, ctrl_handler); + int ret = 0; + + /* See the comments on locking in pwc_g_volatile_ctrl */ + mutex_unlock(&pdev->modlock); + mutex_lock(&pdev->udevlock); + + if (!pdev->udev) { + ret = -ENODEV; + goto leave; + } + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + BRIGHTNESS_FORMATTER, ctrl->val); + break; case V4L2_CID_CONTRAST: - c->value <<= 10; - ret = pwc_set_contrast(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + CONTRAST_FORMATTER, ctrl->val); + break; case V4L2_CID_SATURATION: - ret = pwc_set_saturation(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; + ret = pwc_set_s8_ctrl(pdev, SET_CHROM_CTL, + pdev->saturation_fmt, ctrl->val); + break; case V4L2_CID_GAMMA: - c->value <<= 11; - ret = pwc_set_gamma(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_RED_BALANCE: - c->value <<= 8; - ret = pwc_set_red_gain(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_BLUE_BALANCE: - c->value <<= 8; - ret = pwc_set_blue_gain(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + GAMMA_FORMATTER, ctrl->val); + break; case V4L2_CID_AUTO_WHITE_BALANCE: - c->value = (c->value == 0) ? PWC_WB_MANUAL : PWC_WB_AUTO; - ret = pwc_set_awb(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_EXPOSURE: - c->value <<= 8; - ret = pwc_set_shutter_speed(pdev, c->value ? 0 : 1, c->value); - if (ret < 0) - return -EINVAL; - return 0; + ret = pwc_set_awb(pdev); + break; case V4L2_CID_AUTOGAIN: - /* autogain off means nothing without a gain */ - if (c->value == 0) - return 0; - ret = pwc_set_agc(pdev, c->value, 0); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_GAIN: - c->value <<= 8; - ret = pwc_set_agc(pdev, 0, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_SAVE_USER: - if (pwc_save_user(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_RESTORE_USER: - if (pwc_restore_user(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_RESTORE_FACTORY: - if (pwc_restore_factory(pdev)) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_COLOUR_MODE: - ret = pwc_set_colour_mode(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_AUTOCONTOUR: - c->value = (c->value == 1) ? -1 : 0; - ret = pwc_set_contour(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_CONTOUR: - c->value <<= 10; - ret = pwc_set_contour(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_BACKLIGHT: - ret = pwc_set_backlight(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - case V4L2_CID_PRIVATE_FLICKERLESS: - ret = pwc_set_flicker(pdev, c->value); - if (ret < 0) - return -EINVAL; - case V4L2_CID_PRIVATE_NOISE_REDUCTION: - ret = pwc_set_dynamic_noise(pdev, c->value); - if (ret < 0) - return -EINVAL; - return 0; - + if (DEVICE_USE_CODEC2(pdev->type)) + ret = pwc_set_autogain(pdev); + else if (DEVICE_USE_CODEC3(pdev->type)) + ret = pwc_set_autogain_expo(pdev); + else + ret = -EINVAL; + break; + case V4L2_CID_EXPOSURE_AUTO: + if (DEVICE_USE_CODEC2(pdev->type)) + ret = pwc_set_exposure_auto(pdev); + else + ret = -EINVAL; + break; + case V4L2_CID_COLORFX: + ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL, + COLOUR_MODE_FORMATTER, + ctrl->val ? 0 : 0xff); + break; + case PWC_CID_CUSTOM(autocontour): + if (pdev->autocontour->is_new) { + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + AUTO_CONTOUR_FORMATTER, + pdev->autocontour->val ? 0 : 0xff); + } + if (ret == 0 && pdev->contour->is_new) { + if (pdev->autocontour->val) { + ret = -EBUSY; + break; + } + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + PRESET_CONTOUR_FORMATTER, + pdev->contour->val); + } + break; + case V4L2_CID_BACKLIGHT_COMPENSATION: + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + BACK_LIGHT_COMPENSATION_FORMATTER, + ctrl->val ? 0 : 0xff); + break; + case V4L2_CID_BAND_STOP_FILTER: + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + FLICKERLESS_MODE_FORMATTER, + ctrl->val ? 0 : 0xff); + break; + case PWC_CID_CUSTOM(noise_reduction): + ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL, + DYNAMIC_NOISE_CONTROL_FORMATTER, + ctrl->val); + break; + case PWC_CID_CUSTOM(save_user): + ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER); + break; + case PWC_CID_CUSTOM(restore_user): + ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER); + break; + case PWC_CID_CUSTOM(restore_factory): + ret = pwc_button_ctrl(pdev, + RESTORE_FACTORY_DEFAULTS_FORMATTER); + break; + case V4L2_CID_PAN_RELATIVE: + ret = pwc_set_motor(pdev); + break; + default: + ret = -EINVAL; } - return -EINVAL; + + if (ret) + PWC_ERROR("s_ctrl %s error %d\n", ctrl->name, ret); + +leave: + mutex_unlock(&pdev->udevlock); + mutex_lock(&pdev->modlock); + return ret; } static int pwc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f) @@ -667,157 +967,77 @@ static int pwc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format * return pwc_vidioc_try_fmt(pdev, f); } -static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f) +static int pwc_reqbufs(struct file *file, void *fh, + struct v4l2_requestbuffers *rb) { struct pwc_device *pdev = video_drvdata(file); - return pwc_vidioc_set_fmt(pdev, f); -} - -static int pwc_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb) -{ - int nbuffers; + if (pdev->capt_file != NULL && + pdev->capt_file != file) + return -EBUSY; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n", rb->count); - if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (rb->memory != V4L2_MEMORY_MMAP) - return -EINVAL; + pdev->capt_file = file; - nbuffers = rb->count; - if (nbuffers < 2) - nbuffers = 2; - else if (nbuffers > pwc_mbufs) - nbuffers = pwc_mbufs; - /* Force to use our # of buffers */ - rb->count = pwc_mbufs; - return 0; + return vb2_reqbufs(&pdev->vb_queue, rb); } static int pwc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf) { struct pwc_device *pdev = video_drvdata(file); - int index; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n", buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n"); - return -EINVAL; - } - index = buf->index; - if (index < 0 || index >= pwc_mbufs) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index); - return -EINVAL; - } - - buf->m.offset = index * pdev->len_per_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->field = V4L2_FIELD_NONE; - buf->memory = V4L2_MEMORY_MMAP; - /*buf->flags = V4L2_BUF_FLAG_MAPPED;*/ - buf->length = pdev->len_per_image; - - PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n", buf->index); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n", buf->m.offset); - PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n", buf->bytesused); - - return 0; + return vb2_querybuf(&pdev->vb_queue, buf); } static int pwc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n", buf->index); - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - if (buf->memory != V4L2_MEMORY_MMAP) - return -EINVAL; - if (buf->index >= pwc_mbufs) - return -EINVAL; + struct pwc_device *pdev = video_drvdata(file); - buf->flags |= V4L2_BUF_FLAG_QUEUED; - buf->flags &= ~V4L2_BUF_FLAG_DONE; + if (!pdev->udev) + return -ENODEV; - return 0; + if (pdev->capt_file != file) + return -EBUSY; + + return vb2_qbuf(&pdev->vb_queue, buf); } static int pwc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf) { - DECLARE_WAITQUEUE(wait, current); struct pwc_device *pdev = video_drvdata(file); - int ret; - PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n"); + if (!pdev->udev) + return -ENODEV; - if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - add_wait_queue(&pdev->frameq, &wait); - while (pdev->full_frames == NULL) { - if (pdev->error_status) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -pdev->error_status; - } - - if (signal_pending(current)) { - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - return -ERESTARTSYS; - } - mutex_unlock(&pdev->modlock); - schedule(); - set_current_state(TASK_INTERRUPTIBLE); - mutex_lock(&pdev->modlock); - } - remove_wait_queue(&pdev->frameq, &wait); - set_current_state(TASK_RUNNING); - - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n"); - /* Decompress data in pdev->images[pdev->fill_image] */ - ret = pwc_handle_frame(pdev); - if (ret) - return -EFAULT; - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n"); - - buf->index = pdev->fill_image; - if (pdev->pixfmt != V4L2_PIX_FMT_YUV420) - buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame); - else - buf->bytesused = pdev->view.size; - buf->flags = V4L2_BUF_FLAG_MAPPED; - buf->field = V4L2_FIELD_NONE; - do_gettimeofday(&buf->timestamp); - buf->sequence = 0; - buf->memory = V4L2_MEMORY_MMAP; - buf->m.offset = pdev->fill_image * pdev->len_per_image; - buf->length = pdev->len_per_image; - pwc_next_image(pdev); - - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n", buf->index); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n", buf->length); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n", buf->m.offset); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n", buf->bytesused); - PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n"); - return 0; + if (pdev->capt_file != file) + return -EBUSY; + return vb2_dqbuf(&pdev->vb_queue, buf, file->f_flags & O_NONBLOCK); } static int pwc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) { struct pwc_device *pdev = video_drvdata(file); - return pwc_isoc_init(pdev); + if (!pdev->udev) + return -ENODEV; + + if (pdev->capt_file != file) + return -EBUSY; + + return vb2_streamon(&pdev->vb_queue, i); } static int pwc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) { struct pwc_device *pdev = video_drvdata(file); - pwc_isoc_cleanup(pdev); - return 0; + if (!pdev->udev) + return -ENODEV; + + if (pdev->capt_file != file) + return -EBUSY; + + return vb2_streamoff(&pdev->vb_queue, i); } static int pwc_enum_framesizes(struct file *file, void *fh, @@ -896,9 +1116,6 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = { .vidioc_g_fmt_vid_cap = pwc_g_fmt_vid_cap, .vidioc_s_fmt_vid_cap = pwc_s_fmt_vid_cap, .vidioc_try_fmt_vid_cap = pwc_try_fmt_vid_cap, - .vidioc_queryctrl = pwc_queryctrl, - .vidioc_g_ctrl = pwc_g_ctrl, - .vidioc_s_ctrl = pwc_s_ctrl, .vidioc_reqbufs = pwc_reqbufs, .vidioc_querybuf = pwc_querybuf, .vidioc_qbuf = pwc_qbuf, diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 083f8b1..0e4e2d7 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -29,7 +29,6 @@ #include <linux/usb.h> #include <linux/spinlock.h> #include <linux/wait.h> -#include <linux/version.h> #include <linux/mutex.h> #include <linux/mm.h> #include <linux/slab.h> @@ -37,19 +36,16 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> +#include <media/videobuf2-vmalloc.h> #ifdef CONFIG_USB_PWC_INPUT_EVDEV #include <linux/input.h> #endif -#include "pwc-uncompress.h" #include <media/pwc-ioctl.h> /* Version block */ -#define PWC_MAJOR 10 -#define PWC_MINOR 0 -#define PWC_EXTRAMINOR 12 -#define PWC_VERSION_CODE KERNEL_VERSION(PWC_MAJOR,PWC_MINOR,PWC_EXTRAMINOR) -#define PWC_VERSION "10.0.14" +#define PWC_VERSION "10.0.15" #define PWC_NAME "pwc" #define PFX PWC_NAME ": " @@ -81,9 +77,9 @@ #define PWC_DEBUG_LEVEL (PWC_DEBUG_LEVEL_MODULE) #define PWC_DEBUG(level, fmt, args...) do {\ - if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \ - printk(KERN_DEBUG PFX fmt, ##args); \ - } while(0) + if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \ + printk(KERN_DEBUG PFX fmt, ##args); \ + } while (0) #define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args) #define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args) @@ -110,25 +106,21 @@ #define FEATURE_CODEC1 0x0002 #define FEATURE_CODEC2 0x0004 -/* Turn certain features on/off */ -#define PWC_INT_PIPE 0 - /* Ignore errors in the first N frames, to allow for startup delays */ #define FRAME_LOWMARK 5 /* Size and number of buffers for the ISO pipe. */ -#define MAX_ISO_BUFS 2 +#define MAX_ISO_BUFS 3 #define ISO_FRAMES_PER_DESC 10 #define ISO_MAX_FRAME_SIZE 960 #define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) -/* Frame buffers: contains compressed or uncompressed video data. */ -#define MAX_FRAMES 5 /* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */ #define PWC_FRAME_SIZE (460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE) -/* Absolute maximum number of buffers available for mmap() */ -#define MAX_IMAGES 10 +/* Absolute minimum and maximum number of buffers available for mmap() */ +#define MIN_FRAMES 2 +#define MAX_FRAMES 16 /* Some macros to quickly find the type of a webcam */ #define DEVICE_USE_CODEC1(x) ((x)<675) @@ -136,149 +128,221 @@ #define DEVICE_USE_CODEC3(x) ((x)>=700) #define DEVICE_USE_CODEC23(x) ((x)>=675) -/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */ -struct pwc_iso_buf -{ - void *data; - int length; - int read; - struct urb *urb; -}; +/* from pwc-dec.h */ +#define PWCX_FLAG_PLANAR 0x0001 + +/* Request types: video */ +#define SET_LUM_CTL 0x01 +#define GET_LUM_CTL 0x02 +#define SET_CHROM_CTL 0x03 +#define GET_CHROM_CTL 0x04 +#define SET_STATUS_CTL 0x05 +#define GET_STATUS_CTL 0x06 +#define SET_EP_STREAM_CTL 0x07 +#define GET_EP_STREAM_CTL 0x08 +#define GET_XX_CTL 0x09 +#define SET_XX_CTL 0x0A +#define GET_XY_CTL 0x0B +#define SET_XY_CTL 0x0C +#define SET_MPT_CTL 0x0D +#define GET_MPT_CTL 0x0E + +/* Selectors for the Luminance controls [GS]ET_LUM_CTL */ +#define AGC_MODE_FORMATTER 0x2000 +#define PRESET_AGC_FORMATTER 0x2100 +#define SHUTTER_MODE_FORMATTER 0x2200 +#define PRESET_SHUTTER_FORMATTER 0x2300 +#define PRESET_CONTOUR_FORMATTER 0x2400 +#define AUTO_CONTOUR_FORMATTER 0x2500 +#define BACK_LIGHT_COMPENSATION_FORMATTER 0x2600 +#define CONTRAST_FORMATTER 0x2700 +#define DYNAMIC_NOISE_CONTROL_FORMATTER 0x2800 +#define FLICKERLESS_MODE_FORMATTER 0x2900 +#define AE_CONTROL_SPEED 0x2A00 +#define BRIGHTNESS_FORMATTER 0x2B00 +#define GAMMA_FORMATTER 0x2C00 + +/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */ +#define WB_MODE_FORMATTER 0x1000 +#define AWB_CONTROL_SPEED_FORMATTER 0x1100 +#define AWB_CONTROL_DELAY_FORMATTER 0x1200 +#define PRESET_MANUAL_RED_GAIN_FORMATTER 0x1300 +#define PRESET_MANUAL_BLUE_GAIN_FORMATTER 0x1400 +#define COLOUR_MODE_FORMATTER 0x1500 +#define SATURATION_MODE_FORMATTER1 0x1600 +#define SATURATION_MODE_FORMATTER2 0x1700 + +/* Selectors for the Status controls [GS]ET_STATUS_CTL */ +#define SAVE_USER_DEFAULTS_FORMATTER 0x0200 +#define RESTORE_USER_DEFAULTS_FORMATTER 0x0300 +#define RESTORE_FACTORY_DEFAULTS_FORMATTER 0x0400 +#define READ_AGC_FORMATTER 0x0500 +#define READ_SHUTTER_FORMATTER 0x0600 +#define READ_RED_GAIN_FORMATTER 0x0700 +#define READ_BLUE_GAIN_FORMATTER 0x0800 + +/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */ +#define PT_RELATIVE_CONTROL_FORMATTER 0x01 +#define PT_RESET_CONTROL_FORMATTER 0x02 +#define PT_STATUS_FORMATTER 0x03 /* intermediate buffers with raw data from the USB cam */ struct pwc_frame_buf { - void *data; - volatile int filled; /* number of bytes filled */ - struct pwc_frame_buf *next; /* list */ -}; - -/* additionnal informations used when dealing image between kernel and userland */ -struct pwc_imgbuf -{ - unsigned long offset; /* offset of this buffer in the big array of image_data */ - int vma_use_count; /* count the number of time this memory is mapped */ + struct vb2_buffer vb; /* common v4l buffer stuff -- must be first */ + struct list_head list; + void *data; + int filled; /* number of bytes filled */ }; struct pwc_device { struct video_device vdev; - - /* Pointer to our usb_device, may be NULL after unplug */ - struct usb_device *udev; - - int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ - int release; /* release number */ - int features; /* feature bits */ - char serial[30]; /* serial number (string) */ - int error_status; /* set when something goes wrong with the cam (unplugged, USB errors) */ - int usb_init; /* set when the cam has been initialized over USB */ - - /*** Video data ***/ - int vopen; /* flag */ - int vendpoint; /* video isoc endpoint */ - int vcinterface; /* video control interface */ - int valternate; /* alternate interface needed */ - int vframes, vsize; /* frames-per-second & size (see PSZ_*) */ - int pixfmt; /* pixelformat: V4L2_PIX_FMT_YUV420 or raw: _PWC1, _PWC2 */ - int vframe_count; /* received frames */ - int vframes_dumped; /* counter for dumped frames */ - int vframes_error; /* frames received in error */ - int vmax_packet_size; /* USB maxpacket size */ - int vlast_packet_size; /* for frame synchronisation */ - int visoc_errors; /* number of contiguous ISOC errors */ - int vcompression; /* desired compression factor */ - int vbandlength; /* compressed band length; 0 is uncompressed */ - char vsnapshot; /* snapshot mode */ - char vsync; /* used by isoc handler */ - char vmirror; /* for ToUCaM series */ - char unplugged; - - int cmd_len; - unsigned char cmd_buf[13]; - - /* The image acquisition requires 3 to 4 steps: - 1. data is gathered in short packets from the USB controller - 2. data is synchronized and packed into a frame buffer - 3a. in case data is compressed, decompress it directly into image buffer - 3b. in case data is uncompressed, copy into image buffer with viewport - 4. data is transferred to the user process - - Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES.... - We have in effect a back-to-back-double-buffer system. - */ - /* 1: isoc */ - struct pwc_iso_buf sbuf[MAX_ISO_BUFS]; - char iso_init; - - /* 2: frame */ - struct pwc_frame_buf *fbuf; /* all frames */ - struct pwc_frame_buf *empty_frames, *empty_frames_tail; /* all empty frames */ - struct pwc_frame_buf *full_frames, *full_frames_tail; /* all filled frames */ - struct pwc_frame_buf *fill_frame; /* frame currently being filled */ - struct pwc_frame_buf *read_frame; /* frame currently read by user process */ - int frame_header_size, frame_trailer_size; - int frame_size; - int frame_total_size; /* including header & trailer */ - int drop_frames; - - /* 3: decompression */ - void *decompress_data; /* private data for decompression engine */ - - /* 4: image */ - /* We have an 'image' and a 'view', where 'image' is the fixed-size image - as delivered by the camera, and 'view' is the size requested by the - program. The camera image is centered in this viewport, laced with - a gray or black border. view_min <= image <= view <= view_max; - */ - int image_mask; /* bitmask of supported sizes */ - struct pwc_coord view_min, view_max; /* minimum and maximum viewable sizes */ - struct pwc_coord abs_max; /* maximum supported size with compression */ - struct pwc_coord image, view; /* image and viewport size */ - struct pwc_coord offset; /* offset within the viewport */ - - void *image_data; /* total buffer, which is subdivided into ... */ - struct pwc_imgbuf images[MAX_IMAGES];/* ...several images... */ - int fill_image; /* ...which are rotated. */ - int len_per_image; /* length per image */ - int image_read_pos; /* In case we read data in pieces, keep track of were we are in the imagebuffer */ - int image_used[MAX_IMAGES]; /* For MCAPTURE and SYNC */ - - struct mutex modlock; /* to prevent races in video_open(), etc */ - spinlock_t ptrlock; /* for manipulating the buffer pointers */ - - /*** motorized pan/tilt feature */ - struct pwc_mpt_range angle_range; - int pan_angle; /* in degrees * 100 */ - int tilt_angle; /* absolute angle; 0,0 is home position */ - int snapshot_button_status; /* set to 1 when the user push the button, reset to 0 when this value is read */ + struct mutex modlock; + + /* Pointer to our usb_device, may be NULL after unplug */ + struct usb_device *udev; + /* Protects the setting of udev to NULL by our disconnect handler */ + struct mutex udevlock; + + /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ + int type; + int release; /* release number */ + int features; /* feature bits */ + char serial[30]; /* serial number (string) */ + + /*** Video data ***/ + struct file *capt_file; /* file doing video capture */ + int vendpoint; /* video isoc endpoint */ + int vcinterface; /* video control interface */ + int valternate; /* alternate interface needed */ + int vframes, vsize; /* frames-per-second & size (see PSZ_*) */ + int pixfmt; /* pixelformat: V4L2_PIX_FMT_YUV420 or _PWCX */ + int vframe_count; /* received frames */ + int vmax_packet_size; /* USB maxpacket size */ + int vlast_packet_size; /* for frame synchronisation */ + int visoc_errors; /* number of contiguous ISOC errors */ + int vcompression; /* desired compression factor */ + int vbandlength; /* compressed band length; 0 is uncompressed */ + char vsnapshot; /* snapshot mode */ + char vsync; /* used by isoc handler */ + char vmirror; /* for ToUCaM series */ + char power_save; /* Do powersaving for this cam */ + + int cmd_len; + unsigned char cmd_buf[13]; + + struct urb *urbs[MAX_ISO_BUFS]; + char iso_init; + + /* videobuf2 queue and queued buffers list */ + struct vb2_queue vb_queue; + struct list_head queued_bufs; + spinlock_t queued_bufs_lock; + + /* + * Frame currently being filled, this only gets touched by the + * isoc urb complete handler, and by stream start / stop since + * start / stop touch it before / after starting / killing the urbs + * no locking is needed around this + */ + struct pwc_frame_buf *fill_buf; + + int frame_header_size, frame_trailer_size; + int frame_size; + int frame_total_size; /* including header & trailer */ + int drop_frames; + + void *decompress_data; /* private data for decompression engine */ + + /* + * We have an 'image' and a 'view', where 'image' is the fixed-size img + * as delivered by the camera, and 'view' is the size requested by the + * program. The camera image is centered in this viewport, laced with + * a gray or black border. view_min <= image <= view <= view_max; + */ + int image_mask; /* supported sizes */ + struct pwc_coord view_min, view_max; /* minimum and maximum view */ + struct pwc_coord abs_max; /* maximum supported size */ + struct pwc_coord image, view; /* image and viewport size */ + struct pwc_coord offset; /* offset of the viewport */ + + /*** motorized pan/tilt feature */ + struct pwc_mpt_range angle_range; + int pan_angle; /* in degrees * 100 */ + int tilt_angle; /* absolute angle; 0,0 is home */ + + /* + * Set to 1 when the user push the button, reset to 0 + * when this value is read from sysfs. + */ + int snapshot_button_status; #ifdef CONFIG_USB_PWC_INPUT_EVDEV - struct input_dev *button_dev; /* webcam snapshot button input */ - char button_phys[64]; + struct input_dev *button_dev; /* webcam snapshot button input */ + char button_phys[64]; #endif - /*** Misc. data ***/ - wait_queue_head_t frameq; /* When waiting for a frame to finish... */ -#if PWC_INT_PIPE - void *usb_int_handler; /* for the interrupt endpoint */ -#endif + /* controls */ + struct v4l2_ctrl_handler ctrl_handler; + u16 saturation_fmt; + struct v4l2_ctrl *brightness; + struct v4l2_ctrl *contrast; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *gamma; + struct { + /* awb / red-blue balance cluster */ + struct v4l2_ctrl *auto_white_balance; + struct v4l2_ctrl *red_balance; + struct v4l2_ctrl *blue_balance; + /* usb ctrl transfers are slow, so we cache things */ + int color_bal_valid; + unsigned long last_color_bal_update; /* In jiffies */ + s32 last_red_balance; + s32 last_blue_balance; + }; + struct { + /* autogain / gain cluster */ + struct v4l2_ctrl *autogain; + struct v4l2_ctrl *gain; + int gain_valid; + unsigned long last_gain_update; /* In jiffies */ + s32 last_gain; + }; + struct { + /* exposure_auto / exposure cluster */ + struct v4l2_ctrl *exposure_auto; + struct v4l2_ctrl *exposure; + int exposure_valid; + unsigned long last_exposure_update; /* In jiffies */ + s32 last_exposure; + }; + struct v4l2_ctrl *colorfx; + struct { + /* autocontour/contour cluster */ + struct v4l2_ctrl *autocontour; + struct v4l2_ctrl *contour; + }; + struct v4l2_ctrl *backlight; + struct v4l2_ctrl *flicker; + struct v4l2_ctrl *noise_reduction; + struct v4l2_ctrl *save_user; + struct v4l2_ctrl *restore_user; + struct v4l2_ctrl *restore_factory; + struct { + /* motor control cluster */ + struct v4l2_ctrl *motor_pan; + struct v4l2_ctrl *motor_tilt; + struct v4l2_ctrl *motor_pan_reset; + struct v4l2_ctrl *motor_tilt_reset; + }; + /* CODEC3 models have both gain and exposure controlled by autogain */ + struct v4l2_ctrl *autogain_expo_cluster[3]; }; -#ifdef __cplusplus -extern "C" { -#endif - /* Global variables */ #ifdef CONFIG_USB_PWC_DEBUG extern int pwc_trace; #endif -extern int pwc_mbufs; - -/** functions in pwc-if.c */ -int pwc_handle_frame(struct pwc_device *pdev); -void pwc_next_image(struct pwc_device *pdev); -int pwc_isoc_init(struct pwc_device *pdev); -void pwc_isoc_cleanup(struct pwc_device *pdev); /** Functions in pwc-misc.c */ /* sizes in pixels */ @@ -291,50 +355,25 @@ void pwc_construct(struct pwc_device *pdev); /* Request a certain video mode. Returns < 0 if not possible */ extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot); extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size); -/* Calculate the number of bytes per image (not frame) */ extern int pwc_mpt_reset(struct pwc_device *pdev, int flags); extern int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt); - -/* Various controls; should be obvious. Value 0..65535, or < 0 on error */ -extern int pwc_get_brightness(struct pwc_device *pdev); -extern int pwc_set_brightness(struct pwc_device *pdev, int value); -extern int pwc_get_contrast(struct pwc_device *pdev); -extern int pwc_set_contrast(struct pwc_device *pdev, int value); -extern int pwc_get_gamma(struct pwc_device *pdev); -extern int pwc_set_gamma(struct pwc_device *pdev, int value); -extern int pwc_get_saturation(struct pwc_device *pdev, int *value); -extern int pwc_set_saturation(struct pwc_device *pdev, int value); extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value); extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor); -extern int pwc_restore_user(struct pwc_device *pdev); -extern int pwc_save_user(struct pwc_device *pdev); -extern int pwc_restore_factory(struct pwc_device *pdev); - -/* exported for use by v4l2 controls */ -extern int pwc_get_red_gain(struct pwc_device *pdev, int *value); -extern int pwc_set_red_gain(struct pwc_device *pdev, int value); -extern int pwc_get_blue_gain(struct pwc_device *pdev, int *value); -extern int pwc_set_blue_gain(struct pwc_device *pdev, int value); -extern int pwc_get_awb(struct pwc_device *pdev); -extern int pwc_set_awb(struct pwc_device *pdev, int mode); -extern int pwc_set_agc(struct pwc_device *pdev, int mode, int value); -extern int pwc_get_agc(struct pwc_device *pdev, int *value); -extern int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value); -extern int pwc_get_shutter_speed(struct pwc_device *pdev, int *value); - -extern int pwc_set_colour_mode(struct pwc_device *pdev, int colour); -extern int pwc_get_colour_mode(struct pwc_device *pdev, int *colour); -extern int pwc_set_contour(struct pwc_device *pdev, int contour); -extern int pwc_get_contour(struct pwc_device *pdev, int *contour); -extern int pwc_set_backlight(struct pwc_device *pdev, int backlight); -extern int pwc_get_backlight(struct pwc_device *pdev, int *backlight); -extern int pwc_set_flicker(struct pwc_device *pdev, int flicker); -extern int pwc_get_flicker(struct pwc_device *pdev, int *flicker); -extern int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise); -extern int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise); +extern int send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen); + +/* Control get / set helpers */ +int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data); +int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data); +int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data); +#define pwc_set_s8_ctrl pwc_set_u8_ctrl +int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *dat); +int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data); +int pwc_button_ctrl(struct pwc_device *pdev, u16 value); +int pwc_init_controls(struct pwc_device *pdev); /* Power down or up the camera; not supported by all models */ -extern int pwc_camera_power(struct pwc_device *pdev, int power); +extern void pwc_camera_power(struct pwc_device *pdev, int power); /* Private ioctl()s; see pwc-ioctl.h */ extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg); @@ -343,12 +382,6 @@ extern const struct v4l2_ioctl_ops pwc_ioctl_ops; /** pwc-uncompress.c */ /* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */ -extern int pwc_decompress(struct pwc_device *pdev); - -#ifdef __cplusplus -} -#endif - +int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf); #endif -/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */ diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index b42bfa5..d07df22a 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -22,7 +22,6 @@ #include <linux/mm.h> #include <linux/moduleparam.h> #include <linux/time.h> -#include <linux/version.h> #include <linux/device.h> #include <linux/platform_device.h> #include <linux/clk.h> @@ -40,7 +39,7 @@ #include <mach/dma.h> #include <mach/camera.h> -#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) +#define PXA_CAM_VERSION "0.0.6" #define PXA_CAM_DRV_NAME "pxa27x-camera" /* Camera Interface */ @@ -247,7 +246,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, if (bytes_per_line < 0) return bytes_per_line; - dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size); + dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size); *size = bytes_per_line * icd->user_height; @@ -262,13 +261,13 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count, static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); int i; BUG_ON(in_interrupt()); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__, &buf->vb, buf->vb.baddr, buf->vb.bsize); /* @@ -429,7 +428,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, enum v4l2_field field) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; struct device *dev = pcdev->soc_host.v4l2_dev.dev; struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); @@ -636,11 +635,11 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct soc_camera_device *icd = vq->priv_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n", + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__, vb, vb->baddr, vb->bsize, pcdev->active); list_add_tail(&vb->queue, &pcdev->capture); @@ -658,7 +657,7 @@ static void pxa_videobuf_release(struct videobuf_queue *vq, struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); #ifdef DEBUG struct soc_camera_device *icd = vq->priv_data; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); @@ -843,7 +842,7 @@ static struct videobuf_queue_ops pxa_videobuf_ops = { static void pxa_camera_init_videobuf(struct videobuf_queue *q, struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; /* @@ -972,7 +971,7 @@ static irqreturn_t pxa_camera_irq(int irq, void *data) */ static int pxa_camera_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; if (pcdev->icd) @@ -982,7 +981,7 @@ static int pxa_camera_add_device(struct soc_camera_device *icd) pcdev->icd = icd; - dev_info(icd->dev.parent, "PXA Camera driver attached to camera %d\n", + dev_info(icd->parent, "PXA Camera driver attached to camera %d\n", icd->devnum); return 0; @@ -991,12 +990,12 @@ static int pxa_camera_add_device(struct soc_camera_device *icd) /* Called with .video_lock held */ static void pxa_camera_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; BUG_ON(icd != pcdev->icd); - dev_info(icd->dev.parent, "PXA Camera driver detached from camera %d\n", + dev_info(icd->parent, "PXA Camera driver detached from camera %d\n", icd->devnum); /* disable capture, disable interrupts */ @@ -1057,7 +1056,7 @@ static int test_platform_param(struct pxa_camera_dev *pcdev, static void pxa_camera_setup_cicr(struct soc_camera_device *icd, unsigned long flags, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); unsigned long dw, bpp; @@ -1152,7 +1151,7 @@ static void pxa_camera_setup_cicr(struct soc_camera_device *icd, static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; unsigned long bus_flags, camera_flags, common_flags; int ret; @@ -1210,7 +1209,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) static int pxa_camera_try_bus_param(struct soc_camera_device *icd, unsigned char buswidth) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct pxa_camera_dev *pcdev = ici->priv; unsigned long bus_flags, camera_flags; int ret = test_platform_param(pcdev, buswidth, &bus_flags); @@ -1247,7 +1246,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id struct soc_camera_format_xlate *xlate) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; int formats = 0, ret; struct pxa_cam *cam; enum v4l2_mbus_pixelcode code; @@ -1335,9 +1334,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, struct v4l2_crop *a) { struct v4l2_rect *rect = &a->c; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; - struct device *dev = icd->dev.parent; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_sense sense = { .master_clock = pcdev->mclk, @@ -1379,7 +1378,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, return ret; if (pxa_camera_check_frame(mf.width, mf.height)) { - dev_warn(icd->dev.parent, + dev_warn(icd->parent, "Inconsistent state. Use S_FMT to repair\n"); return -EINVAL; } @@ -1406,9 +1405,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd, static int pxa_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; - struct device *dev = icd->dev.parent; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); const struct soc_camera_format_xlate *xlate = NULL; struct soc_camera_sense sense = { @@ -1485,7 +1484,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + dev_warn(icd->parent, "Format %x not found\n", pixfmt); return -EINVAL; } @@ -1499,16 +1498,11 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, &pix->height, 32, 2048, 0, pixfmt == V4L2_PIX_FMT_YUV422P ? 4 : 0); - pix->bytesperline = soc_mbus_bytes_per_line(pix->width, - xlate->host_fmt); - if (pix->bytesperline < 0) - return pix->bytesperline; - pix->sizeimage = pix->height * pix->bytesperline; - /* limit to sensor capabilities */ mf.width = pix->width; mf.height = pix->height; - mf.field = pix->field; + /* Only progressive video supported so far */ + mf.field = V4L2_FIELD_NONE; mf.colorspace = pix->colorspace; mf.code = xlate->code; @@ -1527,7 +1521,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd, break; default: /* TODO: support interlaced at least in pass-through mode */ - dev_err(icd->dev.parent, "Field type %d unsupported.\n", + dev_err(icd->parent, "Field type %d unsupported.\n", mf.field); return -EINVAL; } @@ -1578,15 +1572,14 @@ static int pxa_camera_querycap(struct soc_camera_host *ici, { /* cap->name is set by the firendly caller:-> */ strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card)); - cap->version = PXA_CAM_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; } -static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state) +static int pxa_camera_suspend(struct device *dev) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; int i = 0, ret = 0; @@ -1596,15 +1589,19 @@ static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state) pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR3); pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR4); - if ((pcdev->icd) && (pcdev->icd->ops->suspend)) - ret = pcdev->icd->ops->suspend(pcdev->icd, state); + if (pcdev->icd) { + struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd); + ret = v4l2_subdev_call(sd, core, s_power, 0); + if (ret == -ENOIOCTLCMD) + ret = 0; + } return ret; } -static int pxa_camera_resume(struct soc_camera_device *icd) +static int pxa_camera_resume(struct device *dev) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; int i = 0, ret = 0; @@ -1618,8 +1615,12 @@ static int pxa_camera_resume(struct soc_camera_device *icd) __raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR3); __raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR4); - if ((pcdev->icd) && (pcdev->icd->ops->resume)) - ret = pcdev->icd->ops->resume(pcdev->icd); + if (pcdev->icd) { + struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd); + ret = v4l2_subdev_call(sd, core, s_power, 1); + if (ret == -ENOIOCTLCMD) + ret = 0; + } /* Restart frame capture if active buffer exists */ if (!ret && pcdev->active) @@ -1632,8 +1633,6 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .owner = THIS_MODULE, .add = pxa_camera_add_device, .remove = pxa_camera_remove_device, - .suspend = pxa_camera_suspend, - .resume = pxa_camera_resume, .set_crop = pxa_camera_set_crop, .get_formats = pxa_camera_get_formats, .put_formats = pxa_camera_put_formats, @@ -1818,9 +1817,15 @@ static int __devexit pxa_camera_remove(struct platform_device *pdev) return 0; } +static struct dev_pm_ops pxa_camera_pm = { + .suspend = pxa_camera_suspend, + .resume = pxa_camera_resume, +}; + static struct platform_driver pxa_camera_driver = { .driver = { .name = PXA_CAM_DRV_NAME, + .pm = &pxa_camera_pm, }, .probe = pxa_camera_probe, .remove = __devexit_p(pxa_camera_remove), @@ -1843,4 +1848,5 @@ module_exit(pxa_camera_exit); MODULE_DESCRIPTION("PXA27x SoC Camera Host driver"); MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); MODULE_LICENSE("GPL"); +MODULE_VERSION(PXA_CAM_VERSION); MODULE_ALIAS("platform:" PXA_CAM_DRV_NAME); diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 57e11b6..847ccc0 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -1364,10 +1364,9 @@ static int rj54n1_video_probe(struct soc_camera_device *icd, int data1, data2; int ret; - /* This could be a BUG_ON() or a WARN_ON(), or remove it completely */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* Read out the chip version register */ data1 = reg_read(client, RJ54N1_DEV_CODE); diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 5b9dce8..803c9c8 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -16,15 +16,10 @@ * Example maximum bandwidth utilization: * * -full size, color mode YUYV or YUV422P: 2 channels at once - * * -full or half size Grey scale: all 4 channels at once - * * -half size, color mode YUYV or YUV422P: all 4 channels at once - * * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels * at once. - * (TODO: Incorporate videodev2 frame rate(FR) enumeration, - * which is currently experimental.) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,7 +42,6 @@ #include <linux/mutex.h> #include <linux/slab.h> #include <linux/videodev2.h> -#include <linux/version.h> #include <linux/mm.h> #include <media/videobuf-vmalloc.h> #include <media/v4l2-common.h> @@ -56,12 +50,7 @@ #include <linux/vmalloc.h> #include <linux/usb.h> -#define S2255_MAJOR_VERSION 1 -#define S2255_MINOR_VERSION 21 -#define S2255_RELEASE 0 -#define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \ - S2255_MINOR_VERSION, \ - S2255_RELEASE) +#define S2255_VERSION "1.22.1" #define FIRMWARE_FILE_NAME "f2255usb.bin" /* default JPEG quality */ @@ -126,7 +115,7 @@ #define MASK_COLOR 0x000000ff #define MASK_JPG_QUALITY 0x0000ff00 #define MASK_INPUT_TYPE 0x000f0000 -/* frame decimation. Not implemented by V4L yet(experimental in V4L) */ +/* frame decimation. */ #define FDEC_1 1 /* capture every frame. default */ #define FDEC_2 2 /* capture every 2nd frame */ #define FDEC_3 3 /* capture every 3rd frame */ @@ -312,9 +301,9 @@ struct s2255_fh { }; /* current cypress EEPROM firmware version */ -#define S2255_CUR_USB_FWVER ((3 << 8) | 11) +#define S2255_CUR_USB_FWVER ((3 << 8) | 12) /* current DSP FW version */ -#define S2255_CUR_DSP_FWVER 10102 +#define S2255_CUR_DSP_FWVER 10104 /* Need DSP version 5+ for video status feature */ #define S2255_MIN_DSP_STATUS 5 #define S2255_MIN_DSP_COLORFILTER 8 @@ -502,7 +491,7 @@ static void planar422p_to_yuv_packed(const unsigned char *in, static void s2255_reset_dsppower(struct s2255_dev *dev) { - s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b01, NULL, 0, 1); + s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1); msleep(10); s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1); msleep(600); @@ -856,7 +845,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(cap->driver, "s2255", sizeof(cap->driver)); strlcpy(cap->card, "s2255", sizeof(cap->card)); usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = S2255_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; } @@ -1984,9 +1972,8 @@ static int s2255_probe_v4l(struct s2255_dev *dev) video_device_node_name(&channel->vdev)); } - printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n", - S2255_MAJOR_VERSION, - S2255_MINOR_VERSION); + printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %s\n", + S2255_VERSION); /* if no channels registered, return error and probe will fail*/ if (atomic_read(&dev->num_channels) == 0) { v4l2_device_unregister(&dev->v4l2_dev); @@ -2302,15 +2289,12 @@ static int s2255_board_init(struct s2255_dev *dev) /* query the firmware */ fw_ver = s2255_get_fx2fw(dev); - printk(KERN_INFO "2255 usb firmware version %d.%d\n", + printk(KERN_INFO "s2255: usb firmware version %d.%d\n", (fw_ver >> 8) & 0xff, fw_ver & 0xff); if (fw_ver < S2255_CUR_USB_FWVER) - dev_err(&dev->udev->dev, - "usb firmware not up to date %d.%d\n", - (fw_ver >> 8) & 0xff, - fw_ver & 0xff); + printk(KERN_INFO "s2255: newer USB firmware available\n"); for (j = 0; j < MAX_CHANNELS; j++) { struct s2255_channel *channel = &dev->channel[j]; @@ -2721,3 +2705,4 @@ module_exit(usb_s2255_exit); MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver"); MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)"); MODULE_LICENSE("GPL"); +MODULE_VERSION(S2255_VERSION); diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 81b4a82..0d730e5 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/bug.h> @@ -451,7 +450,6 @@ static int fimc_vidioc_querycap_capture(struct file *file, void *priv, strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1); strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; - cap->version = KERNEL_VERSION(1, 0, 0); cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_CAPTURE_MPLANE; diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index bdf19ad..aa55066 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -12,7 +12,6 @@ #include <linux/module.h> #include <linux/kernel.h> -#include <linux/version.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/bug.h> @@ -774,7 +773,6 @@ static int fimc_m2m_querycap(struct file *file, void *priv, strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1); strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1); cap->bus_info[0] = 0; - cap->version = KERNEL_VERSION(1, 0, 0); cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; @@ -1937,3 +1935,4 @@ module_exit(fimc_exit); MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0.1"); diff --git a/drivers/media/video/s5p-mfc/Makefile b/drivers/media/video/s5p-mfc/Makefile new file mode 100644 index 0000000..d066340 --- /dev/null +++ b/drivers/media/video/s5p-mfc/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o +s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o s5p_mfc_opr.o +s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o +s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_cmd.o +s5p-mfc-y += s5p_mfc_pm.o s5p_mfc_shm.o diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h new file mode 100644 index 0000000..053a8a8 --- /dev/null +++ b/drivers/media/video/s5p-mfc/regs-mfc.h @@ -0,0 +1,413 @@ +/* + * Register definition file for Samsung MFC V5.1 Interface (FIMV) driver + * + * Kamil Debski, Copyright (c) 2010 Samsung Electronics + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef _REGS_FIMV_H +#define _REGS_FIMV_H + +#define S5P_FIMV_REG_SIZE (S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR) +#define S5P_FIMV_REG_COUNT ((S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR) / 4) + +/* Number of bits that the buffer address should be shifted for particular + * MFC buffers. */ +#define S5P_FIMV_START_ADDR 0x0000 +#define S5P_FIMV_END_ADDR 0xe008 + +#define S5P_FIMV_SW_RESET 0x0000 +#define S5P_FIMV_RISC_HOST_INT 0x0008 + +/* Command from HOST to RISC */ +#define S5P_FIMV_HOST2RISC_CMD 0x0030 +#define S5P_FIMV_HOST2RISC_ARG1 0x0034 +#define S5P_FIMV_HOST2RISC_ARG2 0x0038 +#define S5P_FIMV_HOST2RISC_ARG3 0x003c +#define S5P_FIMV_HOST2RISC_ARG4 0x0040 + +/* Command from RISC to HOST */ +#define S5P_FIMV_RISC2HOST_CMD 0x0044 +#define S5P_FIMV_RISC2HOST_CMD_MASK 0x1FFFF +#define S5P_FIMV_RISC2HOST_ARG1 0x0048 +#define S5P_FIMV_RISC2HOST_ARG2 0x004c +#define S5P_FIMV_RISC2HOST_ARG3 0x0050 +#define S5P_FIMV_RISC2HOST_ARG4 0x0054 + +#define S5P_FIMV_FW_VERSION 0x0058 +#define S5P_FIMV_SYS_MEM_SZ 0x005c +#define S5P_FIMV_FW_STATUS 0x0080 + +/* Memory controller register */ +#define S5P_FIMV_MC_DRAMBASE_ADR_A 0x0508 +#define S5P_FIMV_MC_DRAMBASE_ADR_B 0x050c +#define S5P_FIMV_MC_STATUS 0x0510 + +/* Common register */ +#define S5P_FIMV_COMMON_BASE_A 0x0600 +#define S5P_FIMV_COMMON_BASE_B 0x0700 + +/* Decoder */ +#define S5P_FIMV_DEC_CHROMA_ADR (S5P_FIMV_COMMON_BASE_A) +#define S5P_FIMV_DEC_LUMA_ADR (S5P_FIMV_COMMON_BASE_B) + +/* H.264 decoding */ +#define S5P_FIMV_H264_VERT_NB_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x8c) + /* vertical neighbor motion vector */ +#define S5P_FIMV_H264_NB_IP_ADR (S5P_FIMV_COMMON_BASE_A + 0x90) + /* neighbor pixels for intra pred */ +#define S5P_FIMV_H264_MV_ADR (S5P_FIMV_COMMON_BASE_B + 0x80) + /* H264 motion vector */ + +/* MPEG4 decoding */ +#define S5P_FIMV_MPEG4_NB_DCAC_ADR (S5P_FIMV_COMMON_BASE_A + 0x8c) + /* neighbor AC/DC coeff. */ +#define S5P_FIMV_MPEG4_UP_NB_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x90) + /* upper neighbor motion vector */ +#define S5P_FIMV_MPEG4_SA_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x94) + /* subseq. anchor motion vector */ +#define S5P_FIMV_MPEG4_OT_LINE_ADR (S5P_FIMV_COMMON_BASE_A + 0x98) + /* overlap transform line */ +#define S5P_FIMV_MPEG4_SP_ADR (S5P_FIMV_COMMON_BASE_A + 0xa8) + /* syntax parser */ + +/* H.263 decoding */ +#define S5P_FIMV_H263_NB_DCAC_ADR (S5P_FIMV_COMMON_BASE_A + 0x8c) +#define S5P_FIMV_H263_UP_NB_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x90) +#define S5P_FIMV_H263_SA_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x94) +#define S5P_FIMV_H263_OT_LINE_ADR (S5P_FIMV_COMMON_BASE_A + 0x98) + +/* VC-1 decoding */ +#define S5P_FIMV_VC1_NB_DCAC_ADR (S5P_FIMV_COMMON_BASE_A + 0x8c) +#define S5P_FIMV_VC1_UP_NB_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x90) +#define S5P_FIMV_VC1_SA_MV_ADR (S5P_FIMV_COMMON_BASE_A + 0x94) +#define S5P_FIMV_VC1_OT_LINE_ADR (S5P_FIMV_COMMON_BASE_A + 0x98) +#define S5P_FIMV_VC1_BITPLANE3_ADR (S5P_FIMV_COMMON_BASE_A + 0x9c) + /* bitplane3 */ +#define S5P_FIMV_VC1_BITPLANE2_ADR (S5P_FIMV_COMMON_BASE_A + 0xa0) + /* bitplane2 */ +#define S5P_FIMV_VC1_BITPLANE1_ADR (S5P_FIMV_COMMON_BASE_A + 0xa4) + /* bitplane1 */ + +/* Encoder */ +#define S5P_FIMV_ENC_REF0_LUMA_ADR (S5P_FIMV_COMMON_BASE_A + 0x1c) +#define S5P_FIMV_ENC_REF1_LUMA_ADR (S5P_FIMV_COMMON_BASE_A + 0x20) + /* reconstructed luma */ +#define S5P_FIMV_ENC_REF0_CHROMA_ADR (S5P_FIMV_COMMON_BASE_B) +#define S5P_FIMV_ENC_REF1_CHROMA_ADR (S5P_FIMV_COMMON_BASE_B + 0x04) + /* reconstructed chroma */ +#define S5P_FIMV_ENC_REF2_LUMA_ADR (S5P_FIMV_COMMON_BASE_B + 0x10) +#define S5P_FIMV_ENC_REF2_CHROMA_ADR (S5P_FIMV_COMMON_BASE_B + 0x08) +#define S5P_FIMV_ENC_REF3_LUMA_ADR (S5P_FIMV_COMMON_BASE_B + 0x14) +#define S5P_FIMV_ENC_REF3_CHROMA_ADR (S5P_FIMV_COMMON_BASE_B + 0x0c) + +/* H.264 encoding */ +#define S5P_FIMV_H264_UP_MV_ADR (S5P_FIMV_COMMON_BASE_A) + /* upper motion vector */ +#define S5P_FIMV_H264_NBOR_INFO_ADR (S5P_FIMV_COMMON_BASE_A + 0x04) + /* entropy engine's neighbor info. */ +#define S5P_FIMV_H264_UP_INTRA_MD_ADR (S5P_FIMV_COMMON_BASE_A + 0x08) + /* upper intra MD */ +#define S5P_FIMV_H264_COZERO_FLAG_ADR (S5P_FIMV_COMMON_BASE_A + 0x10) + /* direct cozero flag */ +#define S5P_FIMV_H264_UP_INTRA_PRED_ADR (S5P_FIMV_COMMON_BASE_B + 0x40) + /* upper intra PRED */ + +/* H.263 encoding */ +#define S5P_FIMV_H263_UP_MV_ADR (S5P_FIMV_COMMON_BASE_A) + /* upper motion vector */ +#define S5P_FIMV_H263_ACDC_COEF_ADR (S5P_FIMV_COMMON_BASE_A + 0x04) + /* upper Q coeff. */ + +/* MPEG4 encoding */ +#define S5P_FIMV_MPEG4_UP_MV_ADR (S5P_FIMV_COMMON_BASE_A) + /* upper motion vector */ +#define S5P_FIMV_MPEG4_ACDC_COEF_ADR (S5P_FIMV_COMMON_BASE_A + 0x04) + /* upper Q coeff. */ +#define S5P_FIMV_MPEG4_COZERO_FLAG_ADR (S5P_FIMV_COMMON_BASE_A + 0x10) + /* direct cozero flag */ + +#define S5P_FIMV_ENC_REF_B_LUMA_ADR 0x062c /* ref B Luma addr */ +#define S5P_FIMV_ENC_REF_B_CHROMA_ADR 0x0630 /* ref B Chroma addr */ + +#define S5P_FIMV_ENC_CUR_LUMA_ADR 0x0718 /* current Luma addr */ +#define S5P_FIMV_ENC_CUR_CHROMA_ADR 0x071C /* current Chroma addr */ + +/* Codec common register */ +#define S5P_FIMV_ENC_HSIZE_PX 0x0818 /* frame width at encoder */ +#define S5P_FIMV_ENC_VSIZE_PX 0x081c /* frame height at encoder */ +#define S5P_FIMV_ENC_PROFILE 0x0830 /* profile register */ +#define S5P_FIMV_ENC_PROFILE_H264_MAIN 0 +#define S5P_FIMV_ENC_PROFILE_H264_HIGH 1 +#define S5P_FIMV_ENC_PROFILE_H264_BASELINE 2 +#define S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE 0 +#define S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE 1 +#define S5P_FIMV_ENC_PIC_STRUCT 0x083c /* picture field/frame flag */ +#define S5P_FIMV_ENC_LF_CTRL 0x0848 /* loop filter control */ +#define S5P_FIMV_ENC_ALPHA_OFF 0x084c /* loop filter alpha offset */ +#define S5P_FIMV_ENC_BETA_OFF 0x0850 /* loop filter beta offset */ +#define S5P_FIMV_MR_BUSIF_CTRL 0x0854 /* hidden, bus interface ctrl */ +#define S5P_FIMV_ENC_PXL_CACHE_CTRL 0x0a00 /* pixel cache control */ + +/* Channel & stream interface register */ +#define S5P_FIMV_SI_RTN_CHID 0x2000 /* Return CH inst ID register */ +#define S5P_FIMV_SI_CH0_INST_ID 0x2040 /* codec instance ID */ +#define S5P_FIMV_SI_CH1_INST_ID 0x2080 /* codec instance ID */ +/* Decoder */ +#define S5P_FIMV_SI_VRESOL 0x2004 /* vertical res of decoder */ +#define S5P_FIMV_SI_HRESOL 0x2008 /* horizontal res of decoder */ +#define S5P_FIMV_SI_BUF_NUMBER 0x200c /* number of frames in the + decoded pic */ +#define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */ +#define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */ +#define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to + decode a frame */ +#define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */ + +#define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */ +#define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */ +#define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */ +#define S5P_FIMV_SI_CH0_CPB_SIZE 0x2058 /* max size of coded pic. buf */ +#define S5P_FIMV_SI_CH0_DESC_SIZE 0x205c /* max size of descriptor buf */ + +#define S5P_FIMV_SI_CH1_SB_ST_ADR 0x2084 /* start addr of stream buf */ +#define S5P_FIMV_SI_CH1_SB_FRM_SIZE 0x2088 /* size of stream buf */ +#define S5P_FIMV_SI_CH1_DESC_ADR 0x208c /* addr of descriptor buf */ +#define S5P_FIMV_SI_CH1_CPB_SIZE 0x2098 /* max size of coded pic. buf */ +#define S5P_FIMV_SI_CH1_DESC_SIZE 0x209c /* max size of descriptor buf */ + +#define S5P_FIMV_CRC_LUMA0 0x2030 /* luma crc data per frame + (top field) */ +#define S5P_FIMV_CRC_CHROMA0 0x2034 /* chroma crc data per frame + (top field) */ +#define S5P_FIMV_CRC_LUMA1 0x2038 /* luma crc data per bottom + field */ +#define S5P_FIMV_CRC_CHROMA1 0x203c /* chroma crc data per bottom + field */ + +/* Display status */ +#define S5P_FIMV_DEC_STATUS_DECODING_ONLY 0 +#define S5P_FIMV_DEC_STATUS_DECODING_DISPLAY 1 +#define S5P_FIMV_DEC_STATUS_DISPLAY_ONLY 2 +#define S5P_FIMV_DEC_STATUS_DECODING_EMPTY 3 +#define S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK 7 +#define S5P_FIMV_DEC_STATUS_PROGRESSIVE (0<<3) +#define S5P_FIMV_DEC_STATUS_INTERLACE (1<<3) +#define S5P_FIMV_DEC_STATUS_INTERLACE_MASK (1<<3) +#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_TWO (0<<4) +#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_FOUR (1<<4) +#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_MASK (1<<4) +#define S5P_FIMV_DEC_STATUS_CRC_GENERATED (1<<5) +#define S5P_FIMV_DEC_STATUS_CRC_NOT_GENERATED (0<<5) +#define S5P_FIMV_DEC_STATUS_CRC_MASK (1<<5) + +#define S5P_FIMV_DEC_STATUS_RESOLUTION_MASK (3<<4) +#define S5P_FIMV_DEC_STATUS_RESOLUTION_INC (1<<4) +#define S5P_FIMV_DEC_STATUS_RESOLUTION_DEC (2<<4) + +/* Decode frame address */ +#define S5P_FIMV_DECODE_Y_ADR 0x2024 +#define S5P_FIMV_DECODE_C_ADR 0x2028 + +/* Decoded frame tpe */ +#define S5P_FIMV_DECODE_FRAME_TYPE 0x2020 +#define S5P_FIMV_DECODE_FRAME_MASK 7 + +#define S5P_FIMV_DECODE_FRAME_SKIPPED 0 +#define S5P_FIMV_DECODE_FRAME_I_FRAME 1 +#define S5P_FIMV_DECODE_FRAME_P_FRAME 2 +#define S5P_FIMV_DECODE_FRAME_B_FRAME 3 +#define S5P_FIMV_DECODE_FRAME_OTHER_FRAME 4 + +/* Sizes of buffers required for decoding */ +#define S5P_FIMV_DEC_NB_IP_SIZE (32 * 1024) +#define S5P_FIMV_DEC_VERT_NB_MV_SIZE (16 * 1024) +#define S5P_FIMV_DEC_NB_DCAC_SIZE (16 * 1024) +#define S5P_FIMV_DEC_UPNB_MV_SIZE (68 * 1024) +#define S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE (136 * 1024) +#define S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE (32 * 1024) +#define S5P_FIMV_DEC_VC1_BITPLANE_SIZE (2 * 1024) +#define S5P_FIMV_DEC_STX_PARSER_SIZE (68 * 1024) + +#define S5P_FIMV_DEC_BUF_ALIGN (8 * 1024) +#define S5P_FIMV_ENC_BUF_ALIGN (8 * 1024) +#define S5P_FIMV_NV12M_HALIGN 16 +#define S5P_FIMV_NV12M_LVALIGN 16 +#define S5P_FIMV_NV12M_CVALIGN 8 +#define S5P_FIMV_NV12MT_HALIGN 128 +#define S5P_FIMV_NV12MT_VALIGN 32 +#define S5P_FIMV_NV12M_SALIGN 2048 +#define S5P_FIMV_NV12MT_SALIGN 8192 + +/* Sizes of buffers required for encoding */ +#define S5P_FIMV_ENC_UPMV_SIZE 0x10000 +#define S5P_FIMV_ENC_COLFLG_SIZE 0x10000 +#define S5P_FIMV_ENC_INTRAMD_SIZE 0x10000 +#define S5P_FIMV_ENC_INTRAPRED_SIZE 0x4000 +#define S5P_FIMV_ENC_NBORINFO_SIZE 0x10000 +#define S5P_FIMV_ENC_ACDCCOEF_SIZE 0x10000 + +/* Encoder */ +#define S5P_FIMV_ENC_SI_STRM_SIZE 0x2004 /* stream size */ +#define S5P_FIMV_ENC_SI_PIC_CNT 0x2008 /* picture count */ +#define S5P_FIMV_ENC_SI_WRITE_PTR 0x200c /* write pointer */ +#define S5P_FIMV_ENC_SI_SLICE_TYPE 0x2010 /* slice type(I/P/B/IDR) */ +#define S5P_FIMV_ENC_SI_SLICE_TYPE_NON_CODED 0 +#define S5P_FIMV_ENC_SI_SLICE_TYPE_I 1 +#define S5P_FIMV_ENC_SI_SLICE_TYPE_P 2 +#define S5P_FIMV_ENC_SI_SLICE_TYPE_B 3 +#define S5P_FIMV_ENC_SI_SLICE_TYPE_SKIPPED 4 +#define S5P_FIMV_ENC_SI_SLICE_TYPE_OTHERS 5 +#define S5P_FIMV_ENCODED_Y_ADDR 0x2014 /* the addr of the encoded + luma pic */ +#define S5P_FIMV_ENCODED_C_ADDR 0x2018 /* the addr of the encoded + chroma pic */ + +#define S5P_FIMV_ENC_SI_CH0_SB_ADR 0x2044 /* addr of stream buf */ +#define S5P_FIMV_ENC_SI_CH0_SB_SIZE 0x204c /* size of stream buf */ +#define S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR 0x2050 /* current Luma addr */ +#define S5P_FIMV_ENC_SI_CH0_CUR_C_ADR 0x2054 /* current Chroma addr */ +#define S5P_FIMV_ENC_SI_CH0_FRAME_INS 0x2058 /* frame insertion */ + +#define S5P_FIMV_ENC_SI_CH1_SB_ADR 0x2084 /* addr of stream buf */ +#define S5P_FIMV_ENC_SI_CH1_SB_SIZE 0x208c /* size of stream buf */ +#define S5P_FIMV_ENC_SI_CH1_CUR_Y_ADR 0x2090 /* current Luma addr */ +#define S5P_FIMV_ENC_SI_CH1_CUR_C_ADR 0x2094 /* current Chroma addr */ +#define S5P_FIMV_ENC_SI_CH1_FRAME_INS 0x2098 /* frame insertion */ + +#define S5P_FIMV_ENC_PIC_TYPE_CTRL 0xc504 /* pic type level control */ +#define S5P_FIMV_ENC_B_RECON_WRITE_ON 0xc508 /* B frame recon write ctrl */ +#define S5P_FIMV_ENC_MSLICE_CTRL 0xc50c /* multi slice control */ +#define S5P_FIMV_ENC_MSLICE_MB 0xc510 /* MB number in the one slice */ +#define S5P_FIMV_ENC_MSLICE_BIT 0xc514 /* bit count for one slice */ +#define S5P_FIMV_ENC_CIR_CTRL 0xc518 /* number of intra refresh MB */ +#define S5P_FIMV_ENC_MAP_FOR_CUR 0xc51c /* linear or tiled mode */ +#define S5P_FIMV_ENC_PADDING_CTRL 0xc520 /* padding control */ + +#define S5P_FIMV_ENC_RC_CONFIG 0xc5a0 /* RC config */ +#define S5P_FIMV_ENC_RC_BIT_RATE 0xc5a8 /* bit rate */ +#define S5P_FIMV_ENC_RC_QBOUND 0xc5ac /* max/min QP */ +#define S5P_FIMV_ENC_RC_RPARA 0xc5b0 /* rate control reaction coeff */ +#define S5P_FIMV_ENC_RC_MB_CTRL 0xc5b4 /* MB adaptive scaling */ + +/* Encoder for H264 only */ +#define S5P_FIMV_ENC_H264_ENTROPY_MODE 0xd004 /* CAVLC or CABAC */ +#define S5P_FIMV_ENC_H264_ALPHA_OFF 0xd008 /* loop filter alpha offset */ +#define S5P_FIMV_ENC_H264_BETA_OFF 0xd00c /* loop filter beta offset */ +#define S5P_FIMV_ENC_H264_NUM_OF_REF 0xd010 /* number of reference for P/B */ +#define S5P_FIMV_ENC_H264_TRANS_FLAG 0xd034 /* 8x8 transform flag in PPS & + high profile */ + +#define S5P_FIMV_ENC_RC_FRAME_RATE 0xd0d0 /* frame rate */ + +/* Encoder for MPEG4 only */ +#define S5P_FIMV_ENC_MPEG4_QUART_PXL 0xe008 /* qpel interpolation ctrl */ + +/* Additional */ +#define S5P_FIMV_SI_CH0_DPB_CONF_CTRL 0x2068 /* DPB Config Control Register */ +#define S5P_FIMV_SLICE_INT_MASK 1 +#define S5P_FIMV_SLICE_INT_SHIFT 31 +#define S5P_FIMV_DDELAY_ENA_SHIFT 30 +#define S5P_FIMV_DDELAY_VAL_MASK 0xff +#define S5P_FIMV_DDELAY_VAL_SHIFT 16 +#define S5P_FIMV_DPB_COUNT_MASK 0xffff +#define S5P_FIMV_DPB_FLUSH_MASK 1 +#define S5P_FIMV_DPB_FLUSH_SHIFT 14 + + +#define S5P_FIMV_SI_CH0_RELEASE_BUF 0x2060 /* DPB release buffer register */ +#define S5P_FIMV_SI_CH0_HOST_WR_ADR 0x2064 /* address of shared memory */ + +/* Codec numbers */ +#define S5P_FIMV_CODEC_NONE -1 + +#define S5P_FIMV_CODEC_H264_DEC 0 +#define S5P_FIMV_CODEC_VC1_DEC 1 +#define S5P_FIMV_CODEC_MPEG4_DEC 2 +#define S5P_FIMV_CODEC_MPEG2_DEC 3 +#define S5P_FIMV_CODEC_H263_DEC 4 +#define S5P_FIMV_CODEC_VC1RCV_DEC 5 + +#define S5P_FIMV_CODEC_H264_ENC 16 +#define S5P_FIMV_CODEC_MPEG4_ENC 17 +#define S5P_FIMV_CODEC_H263_ENC 18 + +/* Channel Control Register */ +#define S5P_FIMV_CH_SEQ_HEADER 1 +#define S5P_FIMV_CH_FRAME_START 2 +#define S5P_FIMV_CH_LAST_FRAME 3 +#define S5P_FIMV_CH_INIT_BUFS 4 +#define S5P_FIMV_CH_FRAME_START_REALLOC 5 +#define S5P_FIMV_CH_MASK 7 +#define S5P_FIMV_CH_SHIFT 16 + + +/* Host to RISC command */ +#define S5P_FIMV_H2R_CMD_EMPTY 0 +#define S5P_FIMV_H2R_CMD_OPEN_INSTANCE 1 +#define S5P_FIMV_H2R_CMD_CLOSE_INSTANCE 2 +#define S5P_FIMV_H2R_CMD_SYS_INIT 3 +#define S5P_FIMV_H2R_CMD_FLUSH 4 +#define S5P_FIMV_H2R_CMD_SLEEP 5 +#define S5P_FIMV_H2R_CMD_WAKEUP 6 + +#define S5P_FIMV_R2H_CMD_EMPTY 0 +#define S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET 1 +#define S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET 2 +#define S5P_FIMV_R2H_CMD_RSV_RET 3 +#define S5P_FIMV_R2H_CMD_SEQ_DONE_RET 4 +#define S5P_FIMV_R2H_CMD_FRAME_DONE_RET 5 +#define S5P_FIMV_R2H_CMD_SLICE_DONE_RET 6 +#define S5P_FIMV_R2H_CMD_ENC_COMPLETE_RET 7 +#define S5P_FIMV_R2H_CMD_SYS_INIT_RET 8 +#define S5P_FIMV_R2H_CMD_FW_STATUS_RET 9 +#define S5P_FIMV_R2H_CMD_SLEEP_RET 10 +#define S5P_FIMV_R2H_CMD_WAKEUP_RET 11 +#define S5P_FIMV_R2H_CMD_FLUSH_RET 12 +#define S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET 15 +#define S5P_FIMV_R2H_CMD_EDFU_INIT_RET 16 +#define S5P_FIMV_R2H_CMD_ERR_RET 32 + +/* Error handling defines */ +#define S5P_FIMV_ERR_WARNINGS_START 145 +#define S5P_FIMV_ERR_DEC_MASK 0xFFFF +#define S5P_FIMV_ERR_DEC_SHIFT 0 +#define S5P_FIMV_ERR_DSPL_MASK 0xFFFF0000 +#define S5P_FIMV_ERR_DSPL_SHIFT 16 + +/* Shared memory registers' offsets */ + +/* An offset of the start position in the stream when + * the start position is not aligned */ +#define S5P_FIMV_SHARED_CROP_INFO_H 0x0020 +#define S5P_FIMV_SHARED_CROP_LEFT_MASK 0xFFFF +#define S5P_FIMV_SHARED_CROP_LEFT_SHIFT 0 +#define S5P_FIMV_SHARED_CROP_RIGHT_MASK 0xFFFF0000 +#define S5P_FIMV_SHARED_CROP_RIGHT_SHIFT 16 +#define S5P_FIMV_SHARED_CROP_INFO_V 0x0024 +#define S5P_FIMV_SHARED_CROP_TOP_MASK 0xFFFF +#define S5P_FIMV_SHARED_CROP_TOP_SHIFT 0 +#define S5P_FIMV_SHARED_CROP_BOTTOM_MASK 0xFFFF0000 +#define S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT 16 +#define S5P_FIMV_SHARED_SET_FRAME_TAG 0x0004 +#define S5P_FIMV_SHARED_GET_FRAME_TAG_TOP 0x0008 +#define S5P_FIMV_SHARED_GET_FRAME_TAG_BOT 0x000C +#define S5P_FIMV_SHARED_START_BYTE_NUM 0x0018 +#define S5P_FIMV_SHARED_RC_VOP_TIMING 0x0030 +#define S5P_FIMV_SHARED_LUMA_DPB_SIZE 0x0064 +#define S5P_FIMV_SHARED_CHROMA_DPB_SIZE 0x0068 +#define S5P_FIMV_SHARED_MV_SIZE 0x006C +#define S5P_FIMV_SHARED_PIC_TIME_TOP 0x0010 +#define S5P_FIMV_SHARED_PIC_TIME_BOTTOM 0x0014 +#define S5P_FIMV_SHARED_EXT_ENC_CONTROL 0x0028 +#define S5P_FIMV_SHARED_P_B_FRAME_QP 0x0070 +#define S5P_FIMV_SHARED_ASPECT_RATIO_IDC 0x0074 +#define S5P_FIMV_SHARED_EXTENDED_SAR 0x0078 +#define S5P_FIMV_SHARED_H264_I_PERIOD 0x009C +#define S5P_FIMV_SHARED_RC_CONTROL_CONFIG 0x00A0 + +#endif /* _REGS_FIMV_H */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc.c b/drivers/media/video/s5p-mfc/s5p_mfc.c new file mode 100644 index 0000000..7dc7eab --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc.c @@ -0,0 +1,1274 @@ +/* + * Samsung S5P Multi Format Codec v 5.1 + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/version.h> +#include <linux/videodev2.h> +#include <linux/workqueue.h> +#include <media/videobuf2-core.h> +#include "regs-mfc.h" +#include "s5p_mfc_ctrl.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_dec.h" +#include "s5p_mfc_enc.h" +#include "s5p_mfc_intr.h" +#include "s5p_mfc_opr.h" +#include "s5p_mfc_pm.h" +#include "s5p_mfc_shm.h" + +#define S5P_MFC_NAME "s5p-mfc" +#define S5P_MFC_DEC_NAME "s5p-mfc-dec" +#define S5P_MFC_ENC_NAME "s5p-mfc-enc" + +int debug; +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages"); + +/* Helper functions for interrupt processing */ +/* Remove from hw execution round robin */ +static void clear_work_bit(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + spin_lock(&dev->condlock); + clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock(&dev->condlock); +} + +/* Wake up context wait_queue */ +static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason, + unsigned int err) +{ + ctx->int_cond = 1; + ctx->int_type = reason; + ctx->int_err = err; + wake_up(&ctx->queue); +} + +/* Wake up device wait_queue */ +static void wake_up_dev(struct s5p_mfc_dev *dev, unsigned int reason, + unsigned int err) +{ + dev->int_cond = 1; + dev->int_type = reason; + dev->int_err = err; + wake_up(&dev->queue); +} + +void s5p_mfc_watchdog(unsigned long arg) +{ + struct s5p_mfc_dev *dev = (struct s5p_mfc_dev *)arg; + + if (test_bit(0, &dev->hw_lock)) + atomic_inc(&dev->watchdog_cnt); + if (atomic_read(&dev->watchdog_cnt) >= MFC_WATCHDOG_CNT) { + /* This means that hw is busy and no interrupts were + * generated by hw for the Nth time of running this + * watchdog timer. This usually means a serious hw + * error. Now it is time to kill all instances and + * reset the MFC. */ + mfc_err("Time out during waiting for HW\n"); + queue_work(dev->watchdog_workqueue, &dev->watchdog_work); + } + dev->watchdog_timer.expires = jiffies + + msecs_to_jiffies(MFC_WATCHDOG_INTERVAL); + add_timer(&dev->watchdog_timer); +} + +static void s5p_mfc_watchdog_worker(struct work_struct *work) +{ + struct s5p_mfc_dev *dev; + struct s5p_mfc_ctx *ctx; + unsigned long flags; + int mutex_locked; + int i, ret; + + dev = container_of(work, struct s5p_mfc_dev, watchdog_work); + + mfc_err("Driver timeout error handling\n"); + /* Lock the mutex that protects open and release. + * This is necessary as they may load and unload firmware. */ + mutex_locked = mutex_trylock(&dev->mfc_mutex); + if (!mutex_locked) + mfc_err("Error: some instance may be closing/opening\n"); + spin_lock_irqsave(&dev->irqlock, flags); + + s5p_mfc_clock_off(); + + for (i = 0; i < MFC_NUM_CONTEXTS; i++) { + ctx = dev->ctx[i]; + if (!ctx) + continue; + ctx->state = MFCINST_ERROR; + s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); + s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); + clear_work_bit(ctx); + wake_up_ctx(ctx, S5P_FIMV_R2H_CMD_ERR_RET, 0); + } + clear_bit(0, &dev->hw_lock); + spin_unlock_irqrestore(&dev->irqlock, flags); + /* Double check if there is at least one instance running. + * If no instance is in memory than no firmware should be present */ + if (dev->num_inst > 0) { + ret = s5p_mfc_reload_firmware(dev); + if (ret) { + mfc_err("Failed to reload FW\n"); + goto unlock; + } + s5p_mfc_clock_on(); + ret = s5p_mfc_init_hw(dev); + if (ret) + mfc_err("Failed to reinit FW\n"); + } +unlock: + if (mutex_locked) + mutex_unlock(&dev->mfc_mutex); +} + +static enum s5p_mfc_node_type s5p_mfc_get_node_type(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + + if (!vdev) { + mfc_err("failed to get video_device"); + return MFCNODE_INVALID; + } + if (vdev->index == 0) + return MFCNODE_DECODER; + else if (vdev->index == 1) + return MFCNODE_ENCODER; + return MFCNODE_INVALID; +} + +static void s5p_mfc_clear_int_flags(struct s5p_mfc_dev *dev) +{ + mfc_write(dev, 0, S5P_FIMV_RISC_HOST_INT); + mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD); + mfc_write(dev, 0xffff, S5P_FIMV_SI_RTN_CHID); +} + +static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_buf *dst_buf; + + ctx->state = MFCINST_FINISHED; + ctx->sequence++; + while (!list_empty(&ctx->dst_queue)) { + dst_buf = list_entry(ctx->dst_queue.next, + struct s5p_mfc_buf, list); + mfc_debug(2, "Cleaning up buffer: %d\n", + dst_buf->b->v4l2_buf.index); + vb2_set_plane_payload(dst_buf->b, 0, 0); + vb2_set_plane_payload(dst_buf->b, 1, 0); + list_del(&dst_buf->list); + ctx->dst_queue_cnt--; + dst_buf->b->v4l2_buf.sequence = (ctx->sequence++); + + if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) == + s5p_mfc_read_shm(ctx, PIC_TIME_BOT)) + dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE; + else + dst_buf->b->v4l2_buf.field = V4L2_FIELD_INTERLACED; + + ctx->dec_dst_flag &= ~(1 << dst_buf->b->v4l2_buf.index); + vb2_buffer_done(dst_buf->b, VB2_BUF_STATE_DONE); + } +} + +static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *dst_buf, *src_buf; + size_t dec_y_addr = s5p_mfc_get_dec_y_adr(); + unsigned int frame_type = s5p_mfc_get_frame_type(); + + /* Copy timestamp / timecode from decoded src to dst and set + appropraite flags */ + src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + list_for_each_entry(dst_buf, &ctx->dst_queue, list) { + if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dec_y_addr) { + memcpy(&dst_buf->b->v4l2_buf.timecode, + &src_buf->b->v4l2_buf.timecode, + sizeof(struct v4l2_timecode)); + memcpy(&dst_buf->b->v4l2_buf.timestamp, + &src_buf->b->v4l2_buf.timestamp, + sizeof(struct timeval)); + switch (frame_type) { + case S5P_FIMV_DECODE_FRAME_I_FRAME: + dst_buf->b->v4l2_buf.flags |= + V4L2_BUF_FLAG_KEYFRAME; + break; + case S5P_FIMV_DECODE_FRAME_P_FRAME: + dst_buf->b->v4l2_buf.flags |= + V4L2_BUF_FLAG_PFRAME; + break; + case S5P_FIMV_DECODE_FRAME_B_FRAME: + dst_buf->b->v4l2_buf.flags |= + V4L2_BUF_FLAG_BFRAME; + break; + } + break; + } + } +} + +static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned int err) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *dst_buf; + size_t dspl_y_addr = s5p_mfc_get_dspl_y_adr(); + unsigned int frame_type = s5p_mfc_get_frame_type(); + unsigned int index; + + /* If frame is same as previous then skip and do not dequeue */ + if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) { + if (!ctx->after_packed_pb) + ctx->sequence++; + ctx->after_packed_pb = 0; + return; + } + ctx->sequence++; + /* The MFC returns address of the buffer, now we have to + * check which videobuf does it correspond to */ + list_for_each_entry(dst_buf, &ctx->dst_queue, list) { + /* Check if this is the buffer we're looking for */ + if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dspl_y_addr) { + list_del(&dst_buf->list); + ctx->dst_queue_cnt--; + dst_buf->b->v4l2_buf.sequence = ctx->sequence; + if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) == + s5p_mfc_read_shm(ctx, PIC_TIME_BOT)) + dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE; + else + dst_buf->b->v4l2_buf.field = + V4L2_FIELD_INTERLACED; + vb2_set_plane_payload(dst_buf->b, 0, ctx->luma_size); + vb2_set_plane_payload(dst_buf->b, 1, ctx->chroma_size); + clear_bit(dst_buf->b->v4l2_buf.index, + &ctx->dec_dst_flag); + + vb2_buffer_done(dst_buf->b, + err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); + + index = dst_buf->b->v4l2_buf.index; + break; + } + } +} + +/* Handle frame decoding interrupt */ +static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, + unsigned int reason, unsigned int err) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned int dst_frame_status; + struct s5p_mfc_buf *src_buf; + unsigned long flags; + unsigned int res_change; + + unsigned int index; + + dst_frame_status = s5p_mfc_get_dspl_status() + & S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK; + res_change = s5p_mfc_get_dspl_status() + & S5P_FIMV_DEC_STATUS_RESOLUTION_MASK; + mfc_debug(2, "Frame Status: %x\n", dst_frame_status); + if (ctx->state == MFCINST_RES_CHANGE_INIT) + ctx->state = MFCINST_RES_CHANGE_FLUSH; + if (res_change) { + ctx->state = MFCINST_RES_CHANGE_INIT; + s5p_mfc_clear_int_flags(dev); + wake_up_ctx(ctx, reason, err); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + s5p_mfc_try_run(dev); + return; + } + if (ctx->dpb_flush_flag) + ctx->dpb_flush_flag = 0; + + spin_lock_irqsave(&dev->irqlock, flags); + /* All frames remaining in the buffer have been extracted */ + if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) { + if (ctx->state == MFCINST_RES_CHANGE_FLUSH) { + s5p_mfc_handle_frame_all_extracted(ctx); + ctx->state = MFCINST_RES_CHANGE_END; + goto leave_handle_frame; + } else { + s5p_mfc_handle_frame_all_extracted(ctx); + } + } + + if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY || + dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_ONLY) + s5p_mfc_handle_frame_copy_time(ctx); + + /* A frame has been decoded and is in the buffer */ + if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY || + dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) { + s5p_mfc_handle_frame_new(ctx, err); + } else { + mfc_debug(2, "No frame decode\n"); + } + /* Mark source buffer as complete */ + if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY + && !list_empty(&ctx->src_queue)) { + src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, + list); + ctx->consumed_stream += s5p_mfc_get_consumed_stream(); + if (ctx->codec_mode != S5P_FIMV_CODEC_H264_DEC && + s5p_mfc_get_frame_type() == S5P_FIMV_DECODE_FRAME_P_FRAME + && ctx->consumed_stream + STUFF_BYTE < + src_buf->b->v4l2_planes[0].bytesused) { + /* Run MFC again on the same buffer */ + mfc_debug(2, "Running again the same buffer\n"); + ctx->after_packed_pb = 1; + } else { + index = src_buf->b->v4l2_buf.index; + mfc_debug(2, "MFC needs next buffer\n"); + ctx->consumed_stream = 0; + list_del(&src_buf->list); + ctx->src_queue_cnt--; + if (s5p_mfc_err_dec(err) > 0) + vb2_buffer_done(src_buf->b, VB2_BUF_STATE_ERROR); + else + vb2_buffer_done(src_buf->b, VB2_BUF_STATE_DONE); + } + } +leave_handle_frame: + spin_unlock_irqrestore(&dev->irqlock, flags); + if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING) + || ctx->dst_queue_cnt < ctx->dpb_count) + clear_work_bit(ctx); + s5p_mfc_clear_int_flags(dev); + wake_up_ctx(ctx, reason, err); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + s5p_mfc_try_run(dev); +} + +/* Error handling for interrupt */ +static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx, + unsigned int reason, unsigned int err) +{ + struct s5p_mfc_dev *dev; + unsigned long flags; + + /* If no context is available then all necessary + * processing has been done. */ + if (ctx == 0) + return; + + dev = ctx->dev; + mfc_err("Interrupt Error: %08x\n", err); + s5p_mfc_clear_int_flags(dev); + wake_up_dev(dev, reason, err); + + /* Error recovery is dependent on the state of context */ + switch (ctx->state) { + case MFCINST_INIT: + /* This error had to happen while acquireing instance */ + case MFCINST_GOT_INST: + /* This error had to happen while parsing the header */ + case MFCINST_HEAD_PARSED: + /* This error had to happen while setting dst buffers */ + case MFCINST_RETURN_INST: + /* This error had to happen while releasing instance */ + clear_work_bit(ctx); + wake_up_ctx(ctx, reason, err); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + ctx->state = MFCINST_ERROR; + break; + case MFCINST_FINISHING: + case MFCINST_FINISHED: + case MFCINST_RUNNING: + /* It is higly probable that an error occured + * while decoding a frame */ + clear_work_bit(ctx); + ctx->state = MFCINST_ERROR; + /* Mark all dst buffers as having an error */ + spin_lock_irqsave(&dev->irqlock, flags); + s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); + /* Mark all src buffers as having an error */ + s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); + spin_unlock_irqrestore(&dev->irqlock, flags); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + break; + default: + mfc_err("Encountered an error interrupt which had not been handled\n"); + break; + } + return; +} + +/* Header parsing interrupt handling */ +static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx, + unsigned int reason, unsigned int err) +{ + struct s5p_mfc_dev *dev; + unsigned int guard_width, guard_height; + + if (ctx == 0) + return; + dev = ctx->dev; + if (ctx->c_ops->post_seq_start) { + if (ctx->c_ops->post_seq_start(ctx)) + mfc_err("post_seq_start() failed\n"); + } else { + ctx->img_width = s5p_mfc_get_img_width(); + ctx->img_height = s5p_mfc_get_img_height(); + + ctx->buf_width = ALIGN(ctx->img_width, + S5P_FIMV_NV12MT_HALIGN); + ctx->buf_height = ALIGN(ctx->img_height, + S5P_FIMV_NV12MT_VALIGN); + mfc_debug(2, "SEQ Done: Movie dimensions %dx%d, " + "buffer dimensions: %dx%d\n", ctx->img_width, + ctx->img_height, ctx->buf_width, + ctx->buf_height); + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) { + ctx->luma_size = ALIGN(ctx->buf_width * + ctx->buf_height, S5P_FIMV_DEC_BUF_ALIGN); + ctx->chroma_size = ALIGN(ctx->buf_width * + ALIGN((ctx->img_height >> 1), + S5P_FIMV_NV12MT_VALIGN), + S5P_FIMV_DEC_BUF_ALIGN); + ctx->mv_size = ALIGN(ctx->buf_width * + ALIGN((ctx->buf_height >> 2), + S5P_FIMV_NV12MT_VALIGN), + S5P_FIMV_DEC_BUF_ALIGN); + } else { + guard_width = ALIGN(ctx->img_width + 24, + S5P_FIMV_NV12MT_HALIGN); + guard_height = ALIGN(ctx->img_height + 16, + S5P_FIMV_NV12MT_VALIGN); + ctx->luma_size = ALIGN(guard_width * + guard_height, S5P_FIMV_DEC_BUF_ALIGN); + guard_width = ALIGN(ctx->img_width + 16, + S5P_FIMV_NV12MT_HALIGN); + guard_height = ALIGN((ctx->img_height >> 1) + 4, + S5P_FIMV_NV12MT_VALIGN); + ctx->chroma_size = ALIGN(guard_width * + guard_height, S5P_FIMV_DEC_BUF_ALIGN); + ctx->mv_size = 0; + } + ctx->dpb_count = s5p_mfc_get_dpb_count(); + if (ctx->img_width == 0 || ctx->img_width == 0) + ctx->state = MFCINST_ERROR; + else + ctx->state = MFCINST_HEAD_PARSED; + } + s5p_mfc_clear_int_flags(dev); + clear_work_bit(ctx); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + s5p_mfc_try_run(dev); + wake_up_ctx(ctx, reason, err); +} + +/* Header parsing interrupt handling */ +static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx, + unsigned int reason, unsigned int err) +{ + struct s5p_mfc_buf *src_buf; + struct s5p_mfc_dev *dev; + unsigned long flags; + + if (ctx == 0) + return; + dev = ctx->dev; + s5p_mfc_clear_int_flags(dev); + ctx->int_type = reason; + ctx->int_err = err; + ctx->int_cond = 1; + spin_lock(&dev->condlock); + clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock(&dev->condlock); + if (err == 0) { + ctx->state = MFCINST_RUNNING; + if (!ctx->dpb_flush_flag) { + spin_lock_irqsave(&dev->irqlock, flags); + if (!list_empty(&ctx->src_queue)) { + src_buf = list_entry(ctx->src_queue.next, + struct s5p_mfc_buf, list); + list_del(&src_buf->list); + ctx->src_queue_cnt--; + vb2_buffer_done(src_buf->b, + VB2_BUF_STATE_DONE); + } + spin_unlock_irqrestore(&dev->irqlock, flags); + } else { + ctx->dpb_flush_flag = 0; + } + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + + s5p_mfc_clock_off(); + + wake_up(&ctx->queue); + s5p_mfc_try_run(dev); + } else { + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + + s5p_mfc_clock_off(); + + wake_up(&ctx->queue); + } +} + +/* Interrupt processing */ +static irqreturn_t s5p_mfc_irq(int irq, void *priv) +{ + struct s5p_mfc_dev *dev = priv; + struct s5p_mfc_ctx *ctx; + unsigned int reason; + unsigned int err; + + mfc_debug_enter(); + /* Reset the timeout watchdog */ + atomic_set(&dev->watchdog_cnt, 0); + ctx = dev->ctx[dev->curr_ctx]; + /* Get the reason of interrupt and the error code */ + reason = s5p_mfc_get_int_reason(); + err = s5p_mfc_get_int_err(); + mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err); + switch (reason) { + case S5P_FIMV_R2H_CMD_ERR_RET: + /* An error has occured */ + if (ctx->state == MFCINST_RUNNING && + s5p_mfc_err_dec(err) >= S5P_FIMV_ERR_WARNINGS_START) + s5p_mfc_handle_frame(ctx, reason, err); + else + s5p_mfc_handle_error(ctx, reason, err); + clear_bit(0, &dev->enter_suspend); + break; + + case S5P_FIMV_R2H_CMD_SLICE_DONE_RET: + case S5P_FIMV_R2H_CMD_FRAME_DONE_RET: + if (ctx->c_ops->post_frame_start) { + if (ctx->c_ops->post_frame_start(ctx)) + mfc_err("post_frame_start() failed\n"); + s5p_mfc_clear_int_flags(dev); + wake_up_ctx(ctx, reason, err); + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + BUG(); + s5p_mfc_clock_off(); + s5p_mfc_try_run(dev); + } else { + s5p_mfc_handle_frame(ctx, reason, err); + } + break; + + case S5P_FIMV_R2H_CMD_SEQ_DONE_RET: + s5p_mfc_handle_seq_done(ctx, reason, err); + break; + + case S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET: + ctx->inst_no = s5p_mfc_get_inst_no(); + ctx->state = MFCINST_GOT_INST; + clear_work_bit(ctx); + wake_up(&ctx->queue); + goto irq_cleanup_hw; + + case S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET: + clear_work_bit(ctx); + ctx->state = MFCINST_FREE; + wake_up(&ctx->queue); + goto irq_cleanup_hw; + + case S5P_FIMV_R2H_CMD_SYS_INIT_RET: + case S5P_FIMV_R2H_CMD_FW_STATUS_RET: + case S5P_FIMV_R2H_CMD_SLEEP_RET: + case S5P_FIMV_R2H_CMD_WAKEUP_RET: + if (ctx) + clear_work_bit(ctx); + s5p_mfc_clear_int_flags(dev); + wake_up_dev(dev, reason, err); + clear_bit(0, &dev->hw_lock); + clear_bit(0, &dev->enter_suspend); + break; + + case S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET: + s5p_mfc_handle_init_buffers(ctx, reason, err); + break; + default: + mfc_debug(2, "Unknown int reason\n"); + s5p_mfc_clear_int_flags(dev); + } + mfc_debug_leave(); + return IRQ_HANDLED; +irq_cleanup_hw: + s5p_mfc_clear_int_flags(dev); + ctx->int_type = reason; + ctx->int_err = err; + ctx->int_cond = 1; + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + mfc_err("Failed to unlock hw\n"); + + s5p_mfc_clock_off(); + + s5p_mfc_try_run(dev); + mfc_debug(2, "Exit via irq_cleanup_hw\n"); + return IRQ_HANDLED; +} + +/* Open an MFC node */ +static int s5p_mfc_open(struct file *file) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + struct s5p_mfc_ctx *ctx = NULL; + struct vb2_queue *q; + unsigned long flags; + int ret = 0; + + mfc_debug_enter(); + dev->num_inst++; /* It is guarded by mfc_mutex in vfd */ + /* Allocate memory for context */ + ctx = kzalloc(sizeof *ctx, GFP_KERNEL); + if (!ctx) { + mfc_err("Not enough memory\n"); + ret = -ENOMEM; + goto err_alloc; + } + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + ctx->dev = dev; + INIT_LIST_HEAD(&ctx->src_queue); + INIT_LIST_HEAD(&ctx->dst_queue); + ctx->src_queue_cnt = 0; + ctx->dst_queue_cnt = 0; + /* Get context number */ + ctx->num = 0; + while (dev->ctx[ctx->num]) { + ctx->num++; + if (ctx->num >= MFC_NUM_CONTEXTS) { + mfc_err("Too many open contexts\n"); + ret = -EBUSY; + goto err_no_ctx; + } + } + /* Mark context as idle */ + spin_lock_irqsave(&dev->condlock, flags); + clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + dev->ctx[ctx->num] = ctx; + if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) { + ctx->type = MFCINST_DECODER; + ctx->c_ops = get_dec_codec_ops(); + /* Setup ctrl handler */ + ret = s5p_mfc_dec_ctrls_setup(ctx); + if (ret) { + mfc_err("Failed to setup mfc controls\n"); + goto err_ctrls_setup; + } + } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) { + ctx->type = MFCINST_ENCODER; + ctx->c_ops = get_enc_codec_ops(); + /* only for encoder */ + INIT_LIST_HEAD(&ctx->ref_queue); + ctx->ref_queue_cnt = 0; + /* Setup ctrl handler */ + ret = s5p_mfc_enc_ctrls_setup(ctx); + if (ret) { + mfc_err("Failed to setup mfc controls\n"); + goto err_ctrls_setup; + } + } else { + ret = -ENOENT; + goto err_bad_node; + } + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + ctx->inst_no = -1; + /* Load firmware if this is the first instance */ + if (dev->num_inst == 1) { + dev->watchdog_timer.expires = jiffies + + msecs_to_jiffies(MFC_WATCHDOG_INTERVAL); + add_timer(&dev->watchdog_timer); + ret = s5p_mfc_power_on(); + if (ret < 0) { + mfc_err("power on failed\n"); + goto err_pwr_enable; + } + s5p_mfc_clock_on(); + ret = s5p_mfc_alloc_and_load_firmware(dev); + if (ret) + goto err_alloc_fw; + /* Init the FW */ + ret = s5p_mfc_init_hw(dev); + if (ret) + goto err_init_hw; + s5p_mfc_clock_off(); + } + /* Init videobuf2 queue for CAPTURE */ + q = &ctx->vq_dst; + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + q->drv_priv = &ctx->fh; + if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) { + q->io_modes = VB2_MMAP; + q->ops = get_dec_queue_ops(); + } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) { + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->ops = get_enc_queue_ops(); + } else { + ret = -ENOENT; + goto err_queue_init; + } + q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops; + ret = vb2_queue_init(q); + if (ret) { + mfc_err("Failed to initialize videobuf2 queue(capture)\n"); + goto err_queue_init; + } + /* Init videobuf2 queue for OUTPUT */ + q = &ctx->vq_src; + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + q->io_modes = VB2_MMAP; + q->drv_priv = &ctx->fh; + if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) { + q->io_modes = VB2_MMAP; + q->ops = get_dec_queue_ops(); + } else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) { + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->ops = get_enc_queue_ops(); + } else { + ret = -ENOENT; + goto err_queue_init; + } + q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops; + ret = vb2_queue_init(q); + if (ret) { + mfc_err("Failed to initialize videobuf2 queue(output)\n"); + goto err_queue_init; + } + init_waitqueue_head(&ctx->queue); + mfc_debug_leave(); + return ret; + /* Deinit when failure occured */ +err_queue_init: +err_init_hw: + s5p_mfc_release_firmware(dev); +err_alloc_fw: + dev->ctx[ctx->num] = 0; + del_timer_sync(&dev->watchdog_timer); + s5p_mfc_clock_off(); +err_pwr_enable: + if (dev->num_inst == 1) { + if (s5p_mfc_power_off() < 0) + mfc_err("power off failed\n"); + s5p_mfc_release_firmware(dev); + } +err_ctrls_setup: + s5p_mfc_dec_ctrls_delete(ctx); +err_bad_node: +err_no_ctx: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); +err_alloc: + dev->num_inst--; + mfc_debug_leave(); + return ret; +} + +/* Release MFC context */ +static int s5p_mfc_release(struct file *file) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + + mfc_debug_enter(); + s5p_mfc_clock_on(); + vb2_queue_release(&ctx->vq_src); + vb2_queue_release(&ctx->vq_dst); + /* Mark context as idle */ + spin_lock_irqsave(&dev->condlock, flags); + clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + /* If instance was initialised then + * return instance and free reosurces */ + if (ctx->inst_no != MFC_NO_INSTANCE_SET) { + mfc_debug(2, "Has to free instance\n"); + ctx->state = MFCINST_RETURN_INST; + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_try_run(dev); + /* Wait until instance is returned or timeout occured */ + if (s5p_mfc_wait_for_done_ctx + (ctx, S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET, 0)) { + s5p_mfc_clock_off(); + mfc_err("Err returning instance\n"); + } + mfc_debug(2, "After free instance\n"); + /* Free resources */ + s5p_mfc_release_codec_buffers(ctx); + s5p_mfc_release_instance_buffer(ctx); + if (ctx->type == MFCINST_DECODER) + s5p_mfc_release_dec_desc_buffer(ctx); + + ctx->inst_no = MFC_NO_INSTANCE_SET; + } + /* hardware locking scheme */ + if (dev->curr_ctx == ctx->num) + clear_bit(0, &dev->hw_lock); + dev->num_inst--; + if (dev->num_inst == 0) { + mfc_debug(2, "Last instance - release firmware\n"); + /* reset <-> F/W release */ + s5p_mfc_reset(dev); + s5p_mfc_release_firmware(dev); + del_timer_sync(&dev->watchdog_timer); + if (s5p_mfc_power_off() < 0) + mfc_err("Power off failed\n"); + } + mfc_debug(2, "Shutting down clock\n"); + s5p_mfc_clock_off(); + dev->ctx[ctx->num] = 0; + s5p_mfc_dec_ctrls_delete(ctx); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + mfc_debug_leave(); + return 0; +} + +/* Poll */ +static unsigned int s5p_mfc_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); + struct s5p_mfc_dev *dev = ctx->dev; + struct vb2_queue *src_q, *dst_q; + struct vb2_buffer *src_vb = NULL, *dst_vb = NULL; + unsigned int rc = 0; + unsigned long flags; + + src_q = &ctx->vq_src; + dst_q = &ctx->vq_dst; + /* + * There has to be at least one buffer queued on each queued_list, which + * means either in driver already or waiting for driver to claim it + * and start processing. + */ + if ((!src_q->streaming || list_empty(&src_q->queued_list)) + && (!dst_q->streaming || list_empty(&dst_q->queued_list))) { + rc = POLLERR; + goto end; + } + mutex_unlock(&dev->mfc_mutex); + poll_wait(file, &src_q->done_wq, wait); + poll_wait(file, &dst_q->done_wq, wait); + mutex_lock(&dev->mfc_mutex); + spin_lock_irqsave(&src_q->done_lock, flags); + if (!list_empty(&src_q->done_list)) + src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer, + done_entry); + if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE + || src_vb->state == VB2_BUF_STATE_ERROR)) + rc |= POLLOUT | POLLWRNORM; + spin_unlock_irqrestore(&src_q->done_lock, flags); + spin_lock_irqsave(&dst_q->done_lock, flags); + if (!list_empty(&dst_q->done_list)) + dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer, + done_entry); + if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE + || dst_vb->state == VB2_BUF_STATE_ERROR)) + rc |= POLLIN | POLLRDNORM; + spin_unlock_irqrestore(&dst_q->done_lock, flags); +end: + return rc; +} + +/* Mmap */ +static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data); + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + int ret; + if (offset < DST_QUEUE_OFF_BASE) { + mfc_debug(2, "mmaping source\n"); + ret = vb2_mmap(&ctx->vq_src, vma); + } else { /* capture */ + mfc_debug(2, "mmaping destination\n"); + vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT); + ret = vb2_mmap(&ctx->vq_dst, vma); + } + return ret; +} + +/* v4l2 ops */ +static const struct v4l2_file_operations s5p_mfc_fops = { + .owner = THIS_MODULE, + .open = s5p_mfc_open, + .release = s5p_mfc_release, + .poll = s5p_mfc_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = s5p_mfc_mmap, +}; + +static int match_child(struct device *dev, void *data) +{ + if (!dev_name(dev)) + return 0; + return !strcmp(dev_name(dev), (char *)data); +} + + +/* MFC probe function */ +static int __devinit s5p_mfc_probe(struct platform_device *pdev) +{ + struct s5p_mfc_dev *dev; + struct video_device *vfd; + struct resource *res; + int ret; + + pr_debug("%s++\n", __func__); + dev = kzalloc(sizeof *dev, GFP_KERNEL); + if (!dev) { + dev_err(&pdev->dev, "Not enough memory for MFC device\n"); + return -ENOMEM; + } + + spin_lock_init(&dev->irqlock); + spin_lock_init(&dev->condlock); + dev->plat_dev = pdev; + if (!dev->plat_dev) { + dev_err(&pdev->dev, "No platform data specified\n"); + ret = -ENODEV; + goto err_dev; + } + + ret = s5p_mfc_init_pm(dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get mfc clock source\n"); + goto err_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get memory region resource\n"); + ret = -ENOENT; + goto err_res; + } + + dev->mfc_mem = request_mem_region(res->start, resource_size(res), + pdev->name); + if (dev->mfc_mem == NULL) { + dev_err(&pdev->dev, "failed to get memory region\n"); + ret = -ENOENT; + goto err_mem_reg; + } + dev->regs_base = ioremap(dev->mfc_mem->start, resource_size(dev->mfc_mem)); + if (dev->regs_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap address region\n"); + ret = -ENOENT; + goto err_ioremap; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&pdev->dev, "failed to get irq resource\n"); + ret = -ENOENT; + goto err_get_res; + } + dev->irq = res->start; + ret = request_irq(dev->irq, s5p_mfc_irq, IRQF_DISABLED, pdev->name, + dev); + if (ret) { + dev_err(&pdev->dev, "Failed to install irq (%d)\n", ret); + goto err_req_irq; + } + + dev->mem_dev_l = device_find_child(&dev->plat_dev->dev, "s5p-mfc-l", + match_child); + if (!dev->mem_dev_l) { + mfc_err("Mem child (L) device get failed\n"); + ret = -ENODEV; + goto err_find_child; + } + dev->mem_dev_r = device_find_child(&dev->plat_dev->dev, "s5p-mfc-r", + match_child); + if (!dev->mem_dev_r) { + mfc_err("Mem child (R) device get failed\n"); + ret = -ENODEV; + goto err_find_child; + } + + dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l); + if (IS_ERR_OR_NULL(dev->alloc_ctx[0])) { + ret = PTR_ERR(dev->alloc_ctx[0]); + goto err_mem_init_ctx_0; + } + dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r); + if (IS_ERR_OR_NULL(dev->alloc_ctx[1])) { + ret = PTR_ERR(dev->alloc_ctx[1]); + goto err_mem_init_ctx_1; + } + + mutex_init(&dev->mfc_mutex); + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) + goto err_v4l2_dev_reg; + init_waitqueue_head(&dev->queue); + + /* decoder */ + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto err_dec_alloc; + } + vfd->fops = &s5p_mfc_fops, + vfd->ioctl_ops = get_dec_v4l2_ioctl_ops(); + vfd->release = video_device_release, + vfd->lock = &dev->mfc_mutex; + vfd->v4l2_dev = &dev->v4l2_dev; + snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME); + dev->vfd_dec = vfd; + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + video_device_release(vfd); + goto err_dec_reg; + } + v4l2_info(&dev->v4l2_dev, + "decoder registered as /dev/video%d\n", vfd->num); + video_set_drvdata(vfd, dev); + + /* encoder */ + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto err_enc_alloc; + } + vfd->fops = &s5p_mfc_fops, + vfd->ioctl_ops = get_enc_v4l2_ioctl_ops(); + vfd->release = video_device_release, + vfd->lock = &dev->mfc_mutex; + vfd->v4l2_dev = &dev->v4l2_dev; + snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME); + dev->vfd_enc = vfd; + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + video_device_release(vfd); + goto err_enc_reg; + } + v4l2_info(&dev->v4l2_dev, + "encoder registered as /dev/video%d\n", vfd->num); + video_set_drvdata(vfd, dev); + platform_set_drvdata(pdev, dev); + + dev->hw_lock = 0; + dev->watchdog_workqueue = create_singlethread_workqueue(S5P_MFC_NAME); + INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker); + atomic_set(&dev->watchdog_cnt, 0); + init_timer(&dev->watchdog_timer); + dev->watchdog_timer.data = (unsigned long)dev; + dev->watchdog_timer.function = s5p_mfc_watchdog; + + pr_debug("%s--\n", __func__); + return 0; + +/* Deinit MFC if probe had failed */ +err_enc_reg: + video_device_release(dev->vfd_enc); +err_enc_alloc: + video_unregister_device(dev->vfd_dec); +err_dec_reg: + video_device_release(dev->vfd_dec); +err_dec_alloc: + v4l2_device_unregister(&dev->v4l2_dev); +err_v4l2_dev_reg: + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]); +err_mem_init_ctx_1: + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]); +err_mem_init_ctx_0: +err_find_child: + free_irq(dev->irq, dev); +err_req_irq: +err_get_res: + iounmap(dev->regs_base); + dev->regs_base = NULL; +err_ioremap: + release_resource(dev->mfc_mem); + kfree(dev->mfc_mem); +err_mem_reg: +err_res: + s5p_mfc_final_pm(dev); +err_clk: +err_dev: + kfree(dev); + pr_debug("%s-- with error\n", __func__); + return ret; + +} + +/* Remove the driver */ +static int __devexit s5p_mfc_remove(struct platform_device *pdev) +{ + struct s5p_mfc_dev *dev = platform_get_drvdata(pdev); + + v4l2_info(&dev->v4l2_dev, "Removing %s\n", pdev->name); + + del_timer_sync(&dev->watchdog_timer); + flush_workqueue(dev->watchdog_workqueue); + destroy_workqueue(dev->watchdog_workqueue); + + video_unregister_device(dev->vfd_enc); + video_unregister_device(dev->vfd_dec); + v4l2_device_unregister(&dev->v4l2_dev); + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]); + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]); + + free_irq(dev->irq, dev); + iounmap(dev->regs_base); + if (dev->mfc_mem) { + release_resource(dev->mfc_mem); + kfree(dev->mfc_mem); + dev->mfc_mem = NULL; + } + s5p_mfc_final_pm(dev); + kfree(dev); + return 0; +} + +#ifdef CONFIG_PM_SLEEP + +static int s5p_mfc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev); + int ret; + + if (m_dev->num_inst == 0) + return 0; + return s5p_mfc_sleep(m_dev); + if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) { + mfc_err("Error: going to suspend for a second time\n"); + return -EIO; + } + + /* Check if we're processing then wait if it necessary. */ + while (test_and_set_bit(0, &m_dev->hw_lock) != 0) { + /* Try and lock the HW */ + /* Wait on the interrupt waitqueue */ + ret = wait_event_interruptible_timeout(m_dev->queue, + m_dev->int_cond || m_dev->ctx[m_dev->curr_ctx]->int_cond, + msecs_to_jiffies(MFC_INT_TIMEOUT)); + + if (ret == 0) { + mfc_err("Waiting for hardware to finish timed out\n"); + return -EIO; + } + } + return 0; +} + +static int s5p_mfc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev); + + if (m_dev->num_inst == 0) + return 0; + return s5p_mfc_wakeup(m_dev); +} +#endif + +#ifdef CONFIG_PM_RUNTIME +static int s5p_mfc_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev); + + atomic_set(&m_dev->pm.power, 0); + return 0; +} + +static int s5p_mfc_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev); + int pre_power; + + if (!m_dev->alloc_ctx) + return 0; + pre_power = atomic_read(&m_dev->pm.power); + atomic_set(&m_dev->pm.power, 1); + return 0; +} +#endif + +/* Power management */ +static const struct dev_pm_ops s5p_mfc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(s5p_mfc_suspend, s5p_mfc_resume) + SET_RUNTIME_PM_OPS(s5p_mfc_runtime_suspend, s5p_mfc_runtime_resume, + NULL) +}; + +static struct platform_driver s5p_mfc_pdrv = { + .probe = s5p_mfc_probe, + .remove = __devexit_p(s5p_mfc_remove), + .driver = { + .name = S5P_MFC_NAME, + .owner = THIS_MODULE, + .pm = &s5p_mfc_pm_ops + }, +}; + +static char banner[] __initdata = + "S5P MFC V4L2 Driver, (C) 2011 Samsung Electronics\n"; + +static int __init s5p_mfc_init(void) +{ + int ret; + + pr_info("%s", banner); + ret = platform_driver_register(&s5p_mfc_pdrv); + if (ret) + pr_err("Platform device registration failed.\n"); + return ret; +} + +static void __devexit s5p_mfc_exit(void) +{ + platform_driver_unregister(&s5p_mfc_pdrv); +} + +module_init(s5p_mfc_init); +module_exit(s5p_mfc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); +MODULE_DESCRIPTION("Samsung S5P Multi Format Codec V4L2 driver"); + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c new file mode 100644 index 0000000..f0665ed --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c @@ -0,0 +1,120 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "regs-mfc.h" +#include "s5p_mfc_cmd.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" + +/* This function is used to send a command to the MFC */ +static int s5p_mfc_cmd_host2risc(struct s5p_mfc_dev *dev, int cmd, + struct s5p_mfc_cmd_args *args) +{ + int cur_cmd; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT); + /* wait until host to risc command register becomes 'H2R_CMD_EMPTY' */ + do { + if (time_after(jiffies, timeout)) { + mfc_err("Timeout while waiting for hardware\n"); + return -EIO; + } + cur_cmd = mfc_read(dev, S5P_FIMV_HOST2RISC_CMD); + } while (cur_cmd != S5P_FIMV_H2R_CMD_EMPTY); + mfc_write(dev, args->arg[0], S5P_FIMV_HOST2RISC_ARG1); + mfc_write(dev, args->arg[1], S5P_FIMV_HOST2RISC_ARG2); + mfc_write(dev, args->arg[2], S5P_FIMV_HOST2RISC_ARG3); + mfc_write(dev, args->arg[3], S5P_FIMV_HOST2RISC_ARG4); + /* Issue the command */ + mfc_write(dev, cmd, S5P_FIMV_HOST2RISC_CMD); + return 0; +} + +/* Initialize the MFC */ +int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev) +{ + struct s5p_mfc_cmd_args h2r_args; + + memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); + h2r_args.arg[0] = dev->fw_size; + return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SYS_INIT, &h2r_args); +} + +/* Suspend the MFC hardware */ +int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev) +{ + struct s5p_mfc_cmd_args h2r_args; + + memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); + return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SLEEP, &h2r_args); +} + +/* Wake up the MFC hardware */ +int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev) +{ + struct s5p_mfc_cmd_args h2r_args; + + memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); + return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_WAKEUP, &h2r_args); +} + + +int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_cmd_args h2r_args; + int ret; + + /* Preparing decoding - getting instance number */ + mfc_debug(2, "Getting instance number (codec: %d)\n", ctx->codec_mode); + dev->curr_ctx = ctx->num; + memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); + h2r_args.arg[0] = ctx->codec_mode; + h2r_args.arg[1] = 0; /* no crc & no pixelcache */ + h2r_args.arg[2] = ctx->ctx_ofs; + h2r_args.arg[3] = ctx->ctx_size; + ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE, + &h2r_args); + if (ret) { + mfc_err("Failed to create a new instance\n"); + ctx->state = MFCINST_ERROR; + } + return ret; +} + +int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_cmd_args h2r_args; + int ret; + + if (ctx->state == MFCINST_FREE) { + mfc_err("Instance already returned\n"); + ctx->state = MFCINST_ERROR; + return -EINVAL; + } + /* Closing decoding instance */ + mfc_debug(2, "Returning instance number %d\n", ctx->inst_no); + dev->curr_ctx = ctx->num; + memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args)); + h2r_args.arg[0] = ctx->inst_no; + ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_CLOSE_INSTANCE, + &h2r_args); + if (ret) { + mfc_err("Failed to return an instance\n"); + ctx->state = MFCINST_ERROR; + return -EINVAL; + } + return 0; +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h new file mode 100644 index 0000000..5ceebfe --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h @@ -0,0 +1,30 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_CMD_H_ +#define S5P_MFC_CMD_H_ + +#include "s5p_mfc_common.h" + +#define MAX_H2R_ARG 4 + +struct s5p_mfc_cmd_args { + unsigned int arg[MAX_H2R_ARG]; +}; + +int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev); +int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev); +int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev); +int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx); +int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx); + +#endif /* S5P_MFC_CMD_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_common.h b/drivers/media/video/s5p-mfc/s5p_mfc_common.h new file mode 100644 index 0000000..91146fa --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_common.h @@ -0,0 +1,572 @@ +/* + * Samsung S5P Multi Format Codec v 5.0 + * + * This file contains definitions of enums and structs used by the codec + * driver. + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#ifndef S5P_MFC_COMMON_H_ +#define S5P_MFC_COMMON_H_ + +#include "regs-mfc.h" +#include <linux/platform_device.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-core.h> + +/* Definitions related to MFC memory */ + +/* Offset base used to differentiate between CAPTURE and OUTPUT +* while mmaping */ +#define DST_QUEUE_OFF_BASE (TASK_SIZE / 2) + +/* Offset used by the hardware to store addresses */ +#define MFC_OFFSET_SHIFT 11 + +#define FIRMWARE_ALIGN 0x20000 /* 128KB */ +#define MFC_H264_CTX_BUF_SIZE 0x96000 /* 600KB per H264 instance */ +#define MFC_CTX_BUF_SIZE 0x2800 /* 10KB per instance */ +#define DESC_BUF_SIZE 0x20000 /* 128KB for DESC buffer */ +#define SHARED_BUF_SIZE 0x2000 /* 8KB for shared buffer */ + +#define DEF_CPB_SIZE 0x40000 /* 512KB */ + +#define MFC_BANK1_ALLOC_CTX 0 +#define MFC_BANK2_ALLOC_CTX 1 + +#define MFC_BANK1_ALIGN_ORDER 13 +#define MFC_BANK2_ALIGN_ORDER 13 +#define MFC_BASE_ALIGN_ORDER 17 + +#include <media/videobuf2-dma-contig.h> + +static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b) +{ + /* Same functionality as the vb2_dma_contig_plane_paddr */ + dma_addr_t *paddr = vb2_dma_contig_memops.cookie(b); + + return *paddr; +} + +/* MFC definitions */ +#define MFC_MAX_EXTRA_DPB 5 +#define MFC_MAX_BUFFERS 32 +#define MFC_NUM_CONTEXTS 4 +/* Interrupt timeout */ +#define MFC_INT_TIMEOUT 2000 +/* Busy wait timeout */ +#define MFC_BW_TIMEOUT 500 +/* Watchdog interval */ +#define MFC_WATCHDOG_INTERVAL 1000 +/* After how many executions watchdog should assume lock up */ +#define MFC_WATCHDOG_CNT 10 +#define MFC_NO_INSTANCE_SET -1 +#define MFC_ENC_CAP_PLANE_COUNT 1 +#define MFC_ENC_OUT_PLANE_COUNT 2 +#define STUFF_BYTE 4 +#define MFC_MAX_CTRLS 64 + +#define mfc_read(dev, offset) readl(dev->regs_base + (offset)) +#define mfc_write(dev, data, offset) writel((data), dev->regs_base + \ + (offset)) + +/** + * enum s5p_mfc_fmt_type - type of the pixelformat + */ +enum s5p_mfc_fmt_type { + MFC_FMT_DEC, + MFC_FMT_ENC, + MFC_FMT_RAW, +}; + +/** + * enum s5p_mfc_node_type - The type of an MFC device node. + */ +enum s5p_mfc_node_type { + MFCNODE_INVALID = -1, + MFCNODE_DECODER = 0, + MFCNODE_ENCODER = 1, +}; + +/** + * enum s5p_mfc_inst_type - The type of an MFC instance. + */ +enum s5p_mfc_inst_type { + MFCINST_INVALID, + MFCINST_DECODER, + MFCINST_ENCODER, +}; + +/** + * enum s5p_mfc_inst_state - The state of an MFC instance. + */ +enum s5p_mfc_inst_state { + MFCINST_FREE = 0, + MFCINST_INIT = 100, + MFCINST_GOT_INST, + MFCINST_HEAD_PARSED, + MFCINST_BUFS_SET, + MFCINST_RUNNING, + MFCINST_FINISHING, + MFCINST_FINISHED, + MFCINST_RETURN_INST, + MFCINST_ERROR, + MFCINST_ABORT, + MFCINST_RES_CHANGE_INIT, + MFCINST_RES_CHANGE_FLUSH, + MFCINST_RES_CHANGE_END, +}; + +/** + * enum s5p_mfc_queue_state - The state of buffer queue. + */ +enum s5p_mfc_queue_state { + QUEUE_FREE, + QUEUE_BUFS_REQUESTED, + QUEUE_BUFS_QUERIED, + QUEUE_BUFS_MMAPED, +}; + +/** + * enum s5p_mfc_decode_arg - type of frame decoding + */ +enum s5p_mfc_decode_arg { + MFC_DEC_FRAME, + MFC_DEC_LAST_FRAME, + MFC_DEC_RES_CHANGE, +}; + +struct s5p_mfc_ctx; + +/** + * struct s5p_mfc_buf - MFC buffer + */ +struct s5p_mfc_buf { + struct list_head list; + struct vb2_buffer *b; + union { + struct { + size_t luma; + size_t chroma; + } raw; + size_t stream; + } cookie; + int used; +}; + +/** + * struct s5p_mfc_pm - power management data structure + */ +struct s5p_mfc_pm { + struct clk *clock; + struct clk *clock_gate; + atomic_t power; + struct device *device; +}; + +/** + * struct s5p_mfc_dev - The struct containing driver internal parameters. + * + * @v4l2_dev: v4l2_device + * @vfd_dec: video device for decoding + * @vfd_enc: video device for encoding + * @plat_dev: platform device + * @mem_dev_l: child device of the left memory bank (0) + * @mem_dev_r: child device of the right memory bank (1) + * @regs_base: base address of the MFC hw registers + * @irq: irq resource + * @mfc_mem: MFC registers memory resource + * @dec_ctrl_handler: control framework handler for decoding + * @enc_ctrl_handler: control framework handler for encoding + * @pm: power management control + * @num_inst: couter of active MFC instances + * @irqlock: lock for operations on videobuf2 queues + * @condlock: lock for changing/checking if a context is ready to be + * processed + * @mfc_mutex: lock for video_device + * @int_cond: variable used by the waitqueue + * @int_type: type of last interrupt + * @int_err: error number for last interrupt + * @queue: waitqueue for waiting for completion of device commands + * @fw_size: size of firmware + * @bank1: address of the beggining of bank 1 memory + * @bank2: address of the beggining of bank 2 memory + * @hw_lock: used for hardware locking + * @ctx: array of driver contexts + * @curr_ctx: number of the currently running context + * @ctx_work_bits: used to mark which contexts are waiting for hardware + * @watchdog_cnt: counter for the watchdog + * @watchdog_workqueue: workqueue for the watchdog + * @watchdog_work: worker for the watchdog + * @alloc_ctx: videobuf2 allocator contexts for two memory banks + * @enter_suspend: flag set when entering suspend + * + */ +struct s5p_mfc_dev { + struct v4l2_device v4l2_dev; + struct video_device *vfd_dec; + struct video_device *vfd_enc; + struct platform_device *plat_dev; + struct device *mem_dev_l; + struct device *mem_dev_r; + void __iomem *regs_base; + int irq; + struct resource *mfc_mem; + struct v4l2_ctrl_handler dec_ctrl_handler; + struct v4l2_ctrl_handler enc_ctrl_handler; + struct s5p_mfc_pm pm; + int num_inst; + spinlock_t irqlock; /* lock when operating on videobuf2 queues */ + spinlock_t condlock; /* lock when changing/checking if a context is + ready to be processed */ + struct mutex mfc_mutex; /* video_device lock */ + int int_cond; + int int_type; + unsigned int int_err; + wait_queue_head_t queue; + size_t fw_size; + size_t bank1; + size_t bank2; + unsigned long hw_lock; + struct s5p_mfc_ctx *ctx[MFC_NUM_CONTEXTS]; + int curr_ctx; + unsigned long ctx_work_bits; + atomic_t watchdog_cnt; + struct timer_list watchdog_timer; + struct workqueue_struct *watchdog_workqueue; + struct work_struct watchdog_work; + void *alloc_ctx[2]; + unsigned long enter_suspend; +}; + +/** + * struct s5p_mfc_h264_enc_params - encoding parameters for h264 + */ +struct s5p_mfc_h264_enc_params { + enum v4l2_mpeg_video_h264_profile profile; + enum v4l2_mpeg_video_h264_loop_filter_mode loop_filter_mode; + s8 loop_filter_alpha; + s8 loop_filter_beta; + enum v4l2_mpeg_video_h264_entropy_mode entropy_mode; + u8 max_ref_pic; + u8 num_ref_pic_4p; + int _8x8_transform; + int rc_mb; + int rc_mb_dark; + int rc_mb_smooth; + int rc_mb_static; + int rc_mb_activity; + int vui_sar; + u8 vui_sar_idc; + u16 vui_ext_sar_width; + u16 vui_ext_sar_height; + int open_gop; + u16 open_gop_size; + u8 rc_frame_qp; + u8 rc_min_qp; + u8 rc_max_qp; + u8 rc_p_frame_qp; + u8 rc_b_frame_qp; + enum v4l2_mpeg_video_h264_level level_v4l2; + int level; + u16 cpb_size; +}; + +/** + * struct s5p_mfc_mpeg4_enc_params - encoding parameters for h263 and mpeg4 + */ +struct s5p_mfc_mpeg4_enc_params { + /* MPEG4 Only */ + enum v4l2_mpeg_video_mpeg4_profile profile; + int quarter_pixel; + /* Common for MPEG4, H263 */ + u16 vop_time_res; + u16 vop_frm_delta; + u8 rc_frame_qp; + u8 rc_min_qp; + u8 rc_max_qp; + u8 rc_p_frame_qp; + u8 rc_b_frame_qp; + enum v4l2_mpeg_video_mpeg4_level level_v4l2; + int level; +}; + +/** + * struct s5p_mfc_enc_params - general encoding parameters + */ +struct s5p_mfc_enc_params { + u16 width; + u16 height; + + u16 gop_size; + enum v4l2_mpeg_video_multi_slice_mode slice_mode; + u16 slice_mb; + u32 slice_bit; + u16 intra_refresh_mb; + int pad; + u8 pad_luma; + u8 pad_cb; + u8 pad_cr; + int rc_frame; + u32 rc_bitrate; + u16 rc_reaction_coeff; + u16 vbv_size; + + enum v4l2_mpeg_video_header_mode seq_hdr_mode; + enum v4l2_mpeg_mfc51_video_frame_skip_mode frame_skip_mode; + int fixed_target_bit; + + u8 num_b_frame; + u32 rc_framerate_num; + u32 rc_framerate_denom; + int interlace; + + union { + struct s5p_mfc_h264_enc_params h264; + struct s5p_mfc_mpeg4_enc_params mpeg4; + } codec; + +}; + +/** + * struct s5p_mfc_codec_ops - codec ops, used by encoding + */ +struct s5p_mfc_codec_ops { + /* initialization routines */ + int (*pre_seq_start) (struct s5p_mfc_ctx *ctx); + int (*post_seq_start) (struct s5p_mfc_ctx *ctx); + /* execution routines */ + int (*pre_frame_start) (struct s5p_mfc_ctx *ctx); + int (*post_frame_start) (struct s5p_mfc_ctx *ctx); +}; + +#define call_cop(c, op, args...) \ + (((c)->c_ops->op) ? \ + ((c)->c_ops->op(args)) : 0) + +/** + * struct s5p_mfc_ctx - This struct contains the instance context + * + * @dev: pointer to the s5p_mfc_dev of the device + * @fh: struct v4l2_fh + * @num: number of the context that this structure describes + * @int_cond: variable used by the waitqueue + * @int_type: type of the last interrupt + * @int_err: error number received from MFC hw in the interrupt + * @queue: waitqueue that can be used to wait for this context to + * finish + * @src_fmt: source pixelformat information + * @dst_fmt: destination pixelformat information + * @vq_src: vb2 queue for source buffers + * @vq_dst: vb2 queue for destination buffers + * @src_queue: driver internal queue for source buffers + * @dst_queue: driver internal queue for destination buffers + * @src_queue_cnt: number of buffers queued on the source internal queue + * @dst_queue_cnt: number of buffers queued on the dest internal queue + * @type: type of the instance - decoder or encoder + * @state: state of the context + * @inst_no: number of hw instance associated with the context + * @img_width: width of the image that is decoded or encoded + * @img_height: height of the image that is decoded or encoded + * @buf_width: width of the buffer for processed image + * @buf_height: height of the buffer for processed image + * @luma_size: size of a luma plane + * @chroma_size: size of a chroma plane + * @mv_size: size of a motion vectors buffer + * @consumed_stream: number of bytes that have been used so far from the + * decoding buffer + * @dpb_flush_flag: flag used to indicate that a DPB buffers are being + * flushed + * @bank1_buf: handle to memory allocated for temporary buffers from + * memory bank 1 + * @bank1_phys: address of the temporary buffers from memory bank 1 + * @bank1_size: size of the memory allocated for temporary buffers from + * memory bank 1 + * @bank2_buf: handle to memory allocated for temporary buffers from + * memory bank 2 + * @bank2_phys: address of the temporary buffers from memory bank 2 + * @bank2_size: size of the memory allocated for temporary buffers from + * memory bank 2 + * @capture_state: state of the capture buffers queue + * @output_state: state of the output buffers queue + * @src_bufs: information on allocated source buffers + * @dst_bufs: information on allocated destination buffers + * @sequence: counter for the sequence number for v4l2 + * @dec_dst_flag: flags for buffers queued in the hardware + * @dec_src_buf_size: size of the buffer for source buffers in decoding + * @codec_mode: number of codec mode used by MFC hw + * @slice_interface: slice interface flag + * @loop_filter_mpeg4: loop filter for MPEG4 flag + * @display_delay: value of the display delay for H264 + * @display_delay_enable: display delay for H264 enable flag + * @after_packed_pb: flag used to track buffer when stream is in + * Packed PB format + * @dpb_count: count of the DPB buffers required by MFC hw + * @total_dpb_count: count of DPB buffers with additional buffers + * requested by the application + * @ctx_buf: handle to the memory associated with this context + * @ctx_phys: address of the memory associated with this context + * @ctx_size: size of the memory associated with this context + * @desc_buf: description buffer for decoding handle + * @desc_phys: description buffer for decoding address + * @shm_alloc: handle for the shared memory buffer + * @shm: virtual address for the shared memory buffer + * @shm_ofs: address offset for shared memory + * @enc_params: encoding parameters for MFC + * @enc_dst_buf_size: size of the buffers for encoder output + * @frame_type: used to force the type of the next encoded frame + * @ref_queue: list of the reference buffers for encoding + * @ref_queue_cnt: number of the buffers in the reference list + * @c_ops: ops for encoding + * @ctrls: array of controls, used when adding controls to the + * v4l2 control framework + * @ctrl_handler: handler for v4l2 framework + */ +struct s5p_mfc_ctx { + struct s5p_mfc_dev *dev; + struct v4l2_fh fh; + + int num; + + int int_cond; + int int_type; + unsigned int int_err; + wait_queue_head_t queue; + + struct s5p_mfc_fmt *src_fmt; + struct s5p_mfc_fmt *dst_fmt; + + struct vb2_queue vq_src; + struct vb2_queue vq_dst; + + struct list_head src_queue; + struct list_head dst_queue; + + unsigned int src_queue_cnt; + unsigned int dst_queue_cnt; + + enum s5p_mfc_inst_type type; + enum s5p_mfc_inst_state state; + int inst_no; + + /* Image parameters */ + int img_width; + int img_height; + int buf_width; + int buf_height; + + int luma_size; + int chroma_size; + int mv_size; + + unsigned long consumed_stream; + + unsigned int dpb_flush_flag; + + /* Buffers */ + void *bank1_buf; + size_t bank1_phys; + size_t bank1_size; + + void *bank2_buf; + size_t bank2_phys; + size_t bank2_size; + + enum s5p_mfc_queue_state capture_state; + enum s5p_mfc_queue_state output_state; + + struct s5p_mfc_buf src_bufs[MFC_MAX_BUFFERS]; + int src_bufs_cnt; + struct s5p_mfc_buf dst_bufs[MFC_MAX_BUFFERS]; + int dst_bufs_cnt; + + unsigned int sequence; + unsigned long dec_dst_flag; + size_t dec_src_buf_size; + + /* Control values */ + int codec_mode; + int slice_interface; + int loop_filter_mpeg4; + int display_delay; + int display_delay_enable; + int after_packed_pb; + + int dpb_count; + int total_dpb_count; + + /* Buffers */ + void *ctx_buf; + size_t ctx_phys; + size_t ctx_ofs; + size_t ctx_size; + + void *desc_buf; + size_t desc_phys; + + + void *shm_alloc; + void *shm; + size_t shm_ofs; + + struct s5p_mfc_enc_params enc_params; + + size_t enc_dst_buf_size; + + enum v4l2_mpeg_mfc51_video_force_frame_type force_frame_type; + + struct list_head ref_queue; + unsigned int ref_queue_cnt; + + struct s5p_mfc_codec_ops *c_ops; + + struct v4l2_ctrl *ctrls[MFC_MAX_CTRLS]; + struct v4l2_ctrl_handler ctrl_handler; +}; + +/* + * struct s5p_mfc_fmt - structure used to store information about pixelformats + * used by the MFC + */ +struct s5p_mfc_fmt { + char *name; + u32 fourcc; + u32 codec_mode; + enum s5p_mfc_fmt_type type; + u32 num_planes; +}; + +/** + * struct mfc_control - structure used to store information about MFC controls + * it is used to initialize the control framework. + */ +struct mfc_control { + __u32 id; + enum v4l2_ctrl_type type; + __u8 name[32]; /* Whatever */ + __s32 minimum; /* Note signedness */ + __s32 maximum; + __s32 step; + __u32 menu_skip_mask; + __s32 default_value; + __u32 flags; + __u32 reserved[2]; + __u8 is_volatile; +}; + + +#define fh_to_ctx(__fh) container_of(__fh, struct s5p_mfc_ctx, fh) +#define ctrl_to_ctx(__ctrl) \ + container_of((__ctrl)->handler, struct s5p_mfc_ctx, ctrl_handler) + +#endif /* S5P_MFC_COMMON_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c new file mode 100644 index 0000000..5f4da80 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c @@ -0,0 +1,343 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/jiffies.h> +#include <linux/sched.h> +#include "regs-mfc.h" +#include "s5p_mfc_cmd.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_intr.h" +#include "s5p_mfc_pm.h" + +static void *s5p_mfc_bitproc_buf; +static size_t s5p_mfc_bitproc_phys; +static unsigned char *s5p_mfc_bitproc_virt; + +/* Allocate and load firmware */ +int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev) +{ + struct firmware *fw_blob; + size_t bank2_base_phys; + void *b_base; + int err; + + /* Firmare has to be present as a separate file or compiled + * into kernel. */ + mfc_debug_enter(); + err = request_firmware((const struct firmware **)&fw_blob, + "s5pc110-mfc.fw", dev->v4l2_dev.dev); + if (err != 0) { + mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); + return -EINVAL; + } + dev->fw_size = ALIGN(fw_blob->size, FIRMWARE_ALIGN); + if (s5p_mfc_bitproc_buf) { + mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n"); + release_firmware(fw_blob); + return -ENOMEM; + } + s5p_mfc_bitproc_buf = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], dev->fw_size); + if (IS_ERR(s5p_mfc_bitproc_buf)) { + s5p_mfc_bitproc_buf = 0; + mfc_err("Allocating bitprocessor buffer failed\n"); + release_firmware(fw_blob); + return -ENOMEM; + } + s5p_mfc_bitproc_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], s5p_mfc_bitproc_buf); + if (s5p_mfc_bitproc_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) { + mfc_err("The base memory for bank 1 is not aligned to 128KB\n"); + vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf); + s5p_mfc_bitproc_phys = 0; + s5p_mfc_bitproc_buf = 0; + release_firmware(fw_blob); + return -EIO; + } + s5p_mfc_bitproc_virt = vb2_dma_contig_memops.vaddr(s5p_mfc_bitproc_buf); + if (!s5p_mfc_bitproc_virt) { + mfc_err("Bitprocessor memory remap failed\n"); + vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf); + s5p_mfc_bitproc_phys = 0; + s5p_mfc_bitproc_buf = 0; + release_firmware(fw_blob); + return -EIO; + } + dev->bank1 = s5p_mfc_bitproc_phys; + b_base = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], 1 << MFC_BANK2_ALIGN_ORDER); + if (IS_ERR(b_base)) { + vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf); + s5p_mfc_bitproc_phys = 0; + s5p_mfc_bitproc_buf = 0; + mfc_err("Allocating bank2 base failed\n"); + release_firmware(fw_blob); + return -ENOMEM; + } + bank2_base_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], b_base); + vb2_dma_contig_memops.put(b_base); + if (bank2_base_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) { + mfc_err("The base memory for bank 2 is not aligned to 128KB\n"); + vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf); + s5p_mfc_bitproc_phys = 0; + s5p_mfc_bitproc_buf = 0; + release_firmware(fw_blob); + return -EIO; + } + dev->bank2 = bank2_base_phys; + memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size); + wmb(); + release_firmware(fw_blob); + mfc_debug_leave(); + return 0; +} + +/* Reload firmware to MFC */ +int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev) +{ + struct firmware *fw_blob; + int err; + + /* Firmare has to be present as a separate file or compiled + * into kernel. */ + mfc_debug_enter(); + err = request_firmware((const struct firmware **)&fw_blob, + "s5pc110-mfc.fw", dev->v4l2_dev.dev); + if (err != 0) { + mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n"); + return -EINVAL; + } + if (fw_blob->size > dev->fw_size) { + mfc_err("MFC firmware is too big to be loaded\n"); + release_firmware(fw_blob); + return -ENOMEM; + } + if (s5p_mfc_bitproc_buf == 0 || s5p_mfc_bitproc_phys == 0) { + mfc_err("MFC firmware is not allocated or was not mapped correctly\n"); + release_firmware(fw_blob); + return -EINVAL; + } + memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size); + wmb(); + release_firmware(fw_blob); + mfc_debug_leave(); + return 0; +} + +/* Release firmware memory */ +int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev) +{ + /* Before calling this function one has to make sure + * that MFC is no longer processing */ + if (!s5p_mfc_bitproc_buf) + return -EINVAL; + vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf); + s5p_mfc_bitproc_virt = 0; + s5p_mfc_bitproc_phys = 0; + s5p_mfc_bitproc_buf = 0; + return 0; +} + +/* Reset the device */ +int s5p_mfc_reset(struct s5p_mfc_dev *dev) +{ + unsigned int mc_status; + unsigned long timeout; + + mfc_debug_enter(); + /* Stop procedure */ + /* reset RISC */ + mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET); + /* All reset except for MC */ + mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET); + mdelay(10); + + timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT); + /* Check MC status */ + do { + if (time_after(jiffies, timeout)) { + mfc_err("Timeout while resetting MFC\n"); + return -EIO; + } + + mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS); + + } while (mc_status & 0x3); + + mfc_write(dev, 0x0, S5P_FIMV_SW_RESET); + mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET); + mfc_debug_leave(); + return 0; +} + +static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev) +{ + mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A); + mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B); + mfc_debug(2, "Bank1: %08x, Bank2: %08x\n", dev->bank1, dev->bank2); +} + +static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev) +{ + mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID); + mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID); + mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD); + mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD); +} + +/* Initialize hardware */ +int s5p_mfc_init_hw(struct s5p_mfc_dev *dev) +{ + unsigned int ver; + int ret; + + mfc_debug_enter(); + if (!s5p_mfc_bitproc_buf) + return -EINVAL; + + /* 0. MFC reset */ + mfc_debug(2, "MFC reset..\n"); + s5p_mfc_clock_on(); + ret = s5p_mfc_reset(dev); + if (ret) { + mfc_err("Failed to reset MFC - timeout\n"); + return ret; + } + mfc_debug(2, "Done MFC reset..\n"); + /* 1. Set DRAM base Addr */ + s5p_mfc_init_memctrl(dev); + /* 2. Initialize registers of channel I/F */ + s5p_mfc_clear_cmds(dev); + /* 3. Release reset signal to the RISC */ + s5p_mfc_clean_dev_int_flags(dev); + mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET); + mfc_debug(2, "Will now wait for completion of firmware transfer\n"); + if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_FW_STATUS_RET)) { + mfc_err("Failed to load firmware\n"); + s5p_mfc_reset(dev); + s5p_mfc_clock_off(); + return -EIO; + } + s5p_mfc_clean_dev_int_flags(dev); + /* 4. Initialize firmware */ + ret = s5p_mfc_sys_init_cmd(dev); + if (ret) { + mfc_err("Failed to send command to MFC - timeout\n"); + s5p_mfc_reset(dev); + s5p_mfc_clock_off(); + return ret; + } + mfc_debug(2, "Ok, now will write a command to init the system\n"); + if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SYS_INIT_RET)) { + mfc_err("Failed to load firmware\n"); + s5p_mfc_reset(dev); + s5p_mfc_clock_off(); + return -EIO; + } + dev->int_cond = 0; + if (dev->int_err != 0 || dev->int_type != + S5P_FIMV_R2H_CMD_SYS_INIT_RET) { + /* Failure. */ + mfc_err("Failed to init firmware - error: %d int: %d\n", + dev->int_err, dev->int_type); + s5p_mfc_reset(dev); + s5p_mfc_clock_off(); + return -EIO; + } + ver = mfc_read(dev, S5P_FIMV_FW_VERSION); + mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n", + (ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF); + s5p_mfc_clock_off(); + mfc_debug_leave(); + return 0; +} + + +int s5p_mfc_sleep(struct s5p_mfc_dev *dev) +{ + int ret; + + mfc_debug_enter(); + s5p_mfc_clock_on(); + s5p_mfc_clean_dev_int_flags(dev); + ret = s5p_mfc_sleep_cmd(dev); + if (ret) { + mfc_err("Failed to send command to MFC - timeout\n"); + return ret; + } + if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SLEEP_RET)) { + mfc_err("Failed to sleep\n"); + return -EIO; + } + s5p_mfc_clock_off(); + dev->int_cond = 0; + if (dev->int_err != 0 || dev->int_type != + S5P_FIMV_R2H_CMD_SLEEP_RET) { + /* Failure. */ + mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err, + dev->int_type); + return -EIO; + } + mfc_debug_leave(); + return ret; +} + +int s5p_mfc_wakeup(struct s5p_mfc_dev *dev) +{ + int ret; + + mfc_debug_enter(); + /* 0. MFC reset */ + mfc_debug(2, "MFC reset..\n"); + s5p_mfc_clock_on(); + ret = s5p_mfc_reset(dev); + if (ret) { + mfc_err("Failed to reset MFC - timeout\n"); + return ret; + } + mfc_debug(2, "Done MFC reset..\n"); + /* 1. Set DRAM base Addr */ + s5p_mfc_init_memctrl(dev); + /* 2. Initialize registers of channel I/F */ + s5p_mfc_clear_cmds(dev); + s5p_mfc_clean_dev_int_flags(dev); + /* 3. Initialize firmware */ + ret = s5p_mfc_wakeup_cmd(dev); + if (ret) { + mfc_err("Failed to send command to MFC - timeout\n"); + return ret; + } + /* 4. Release reset signal to the RISC */ + mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET); + mfc_debug(2, "Ok, now will write a command to wakeup the system\n"); + if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_WAKEUP_RET)) { + mfc_err("Failed to load firmware\n"); + return -EIO; + } + s5p_mfc_clock_off(); + dev->int_cond = 0; + if (dev->int_err != 0 || dev->int_type != + S5P_FIMV_R2H_CMD_WAKEUP_RET) { + /* Failure. */ + mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err, + dev->int_type); + return -EIO; + } + mfc_debug_leave(); + return 0; +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h new file mode 100644 index 0000000..61dc23b --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h @@ -0,0 +1,29 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_CTRL_H +#define S5P_MFC_CTRL_H + +#include "s5p_mfc_common.h" + +int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev); +int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev); +int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev); + +int s5p_mfc_init_hw(struct s5p_mfc_dev *dev); + +int s5p_mfc_sleep(struct s5p_mfc_dev *dev); +int s5p_mfc_wakeup(struct s5p_mfc_dev *dev); + +int s5p_mfc_reset(struct s5p_mfc_dev *dev); + +#endif /* S5P_MFC_CTRL_H */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_debug.h b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h new file mode 100644 index 0000000..ecb8616 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h @@ -0,0 +1,48 @@ +/* + * drivers/media/video/samsung/mfc5/s5p_mfc_debug.h + * + * Header file for Samsung MFC (Multi Function Codec - FIMV) driver + * This file contains debug macros + * + * Kamil Debski, Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef S5P_MFC_DEBUG_H_ +#define S5P_MFC_DEBUG_H_ + +#define DEBUG + +#ifdef DEBUG +extern int debug; + +#define mfc_debug(level, fmt, args...) \ + do { \ + if (debug >= level) \ + printk(KERN_DEBUG "%s:%d: " fmt, \ + __func__, __LINE__, ##args); \ + } while (0) +#else +#define mfc_debug(level, fmt, args...) +#endif + +#define mfc_debug_enter() mfc_debug(5, "enter") +#define mfc_debug_leave() mfc_debug(5, "leave") + +#define mfc_err(fmt, args...) \ + do { \ + printk(KERN_ERR "%s:%d: " fmt, \ + __func__, __LINE__, ##args); \ + } while (0) + +#define mfc_info(fmt, args...) \ + do { \ + printk(KERN_INFO "%s:%d: " fmt, \ + __func__, __LINE__, ##args); \ + } while (0) + +#endif /* S5P_MFC_DEBUG_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c new file mode 100644 index 0000000..b2c5052 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c @@ -0,0 +1,1036 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.c + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/version.h> +#include <linux/videodev2.h> +#include <linux/workqueue.h> +#include <media/v4l2-ctrls.h> +#include <media/videobuf2-core.h> +#include "regs-mfc.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_dec.h" +#include "s5p_mfc_intr.h" +#include "s5p_mfc_opr.h" +#include "s5p_mfc_pm.h" +#include "s5p_mfc_shm.h" + +static struct s5p_mfc_fmt formats[] = { + { + .name = "4:2:0 2 Planes 64x32 Tiles", + .fourcc = V4L2_PIX_FMT_NV12MT, + .codec_mode = S5P_FIMV_CODEC_NONE, + .type = MFC_FMT_RAW, + .num_planes = 2, + }, + { + .name = "4:2:0 2 Planes", + .fourcc = V4L2_PIX_FMT_NV12M, + .codec_mode = S5P_FIMV_CODEC_NONE, + .type = MFC_FMT_RAW, + .num_planes = 2, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .codec_mode = S5P_FIMV_CODEC_H264_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "H263 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H263, + .codec_mode = S5P_FIMV_CODEC_H263_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "MPEG1 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG1, + .codec_mode = S5P_FIMV_CODEC_MPEG2_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "MPEG2 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG2, + .codec_mode = S5P_FIMV_CODEC_MPEG2_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .codec_mode = S5P_FIMV_CODEC_MPEG4_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "XviD Encoded Stream", + .fourcc = V4L2_PIX_FMT_XVID, + .codec_mode = S5P_FIMV_CODEC_MPEG4_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "VC1 Encoded Stream", + .fourcc = V4L2_PIX_FMT_VC1_ANNEX_G, + .codec_mode = S5P_FIMV_CODEC_VC1_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, + { + .name = "VC1 RCV Encoded Stream", + .fourcc = V4L2_PIX_FMT_VC1_ANNEX_L, + .codec_mode = S5P_FIMV_CODEC_VC1RCV_DEC, + .type = MFC_FMT_DEC, + .num_planes = 1, + }, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) + +/* Find selected format description */ +static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t) +{ + unsigned int i; + + for (i = 0; i < NUM_FORMATS; i++) { + if (formats[i].fourcc == f->fmt.pix_mp.pixelformat && + formats[i].type == t) + return &formats[i]; + } + return NULL; +} + +static struct mfc_control controls[] = { + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H264 Display Delay", + .minimum = 0, + .maximum = 16383, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "H264 Display Delay Enable", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mpeg4 Loop Filter Enable", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Slice Interface Enable", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Minimum number of cap bufs", + .minimum = 1, + .maximum = 32, + .step = 1, + .default_value = 1, + .is_volatile = 1, + }, +}; + +#define NUM_CTRLS ARRAY_SIZE(controls) + +/* Check whether a context should be run on hardware */ +static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) +{ + /* Context is to parse header */ + if (ctx->src_queue_cnt >= 1 && ctx->state == MFCINST_GOT_INST) + return 1; + /* Context is to decode a frame */ + if (ctx->src_queue_cnt >= 1 && + ctx->state == MFCINST_RUNNING && + ctx->dst_queue_cnt >= ctx->dpb_count) + return 1; + /* Context is to return last frame */ + if (ctx->state == MFCINST_FINISHING && + ctx->dst_queue_cnt >= ctx->dpb_count) + return 1; + /* Context is to set buffers */ + if (ctx->src_queue_cnt >= 1 && + ctx->state == MFCINST_HEAD_PARSED && + ctx->capture_state == QUEUE_BUFS_MMAPED) + return 1; + /* Resolution change */ + if ((ctx->state == MFCINST_RES_CHANGE_INIT || + ctx->state == MFCINST_RES_CHANGE_FLUSH) && + ctx->dst_queue_cnt >= ctx->dpb_count) + return 1; + if (ctx->state == MFCINST_RES_CHANGE_END && + ctx->src_queue_cnt >= 1) + return 1; + mfc_debug(2, "ctx is not ready\n"); + return 0; +} + +static struct s5p_mfc_codec_ops decoder_codec_ops = { + .pre_seq_start = NULL, + .post_seq_start = NULL, + .pre_frame_start = NULL, + .post_frame_start = NULL, +}; + +/* Query capabilities of the device */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + + strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1); + strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); + cap->bus_info[0] = 0; + cap->version = KERNEL_VERSION(1, 0, 0); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT + | V4L2_CAP_STREAMING; + return 0; +} + +/* Enumerate format */ +static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out) +{ + struct s5p_mfc_fmt *fmt; + int i, j = 0; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (mplane && formats[i].num_planes == 1) + continue; + else if (!mplane && formats[i].num_planes > 1) + continue; + if (out && formats[i].type != MFC_FMT_DEC) + continue; + else if (!out && formats[i].type != MFC_FMT_RAW) + continue; + + if (j == f->index) + break; + ++j; + } + if (i == ARRAY_SIZE(formats)) + return -EINVAL; + fmt = &formats[i]; + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, false, false); +} + +static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, true, false); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *prov, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, false, true); +} + +static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, true, true); +} + +/* Get format */ +static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + struct v4l2_pix_format_mplane *pix_mp; + + mfc_debug_enter(); + pix_mp = &f->fmt.pix_mp; + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE && + (ctx->state == MFCINST_GOT_INST || ctx->state == + MFCINST_RES_CHANGE_END)) { + /* If the MFC is parsing the header, + * so wait until it is finished */ + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_SEQ_DONE_RET, + 0); + } + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE && + ctx->state >= MFCINST_HEAD_PARSED && + ctx->state < MFCINST_ABORT) { + /* This is run on CAPTURE (decode output) */ + /* Width and height are set to the dimensions + of the movie, the buffer is bigger and + further processing stages should crop to this + rectangle. */ + pix_mp->width = ctx->buf_width; + pix_mp->height = ctx->buf_height; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->num_planes = 2; + /* Set pixelformat to the format in which MFC + outputs the decoded frame */ + pix_mp->pixelformat = V4L2_PIX_FMT_NV12MT; + pix_mp->plane_fmt[0].bytesperline = ctx->buf_width; + pix_mp->plane_fmt[0].sizeimage = ctx->luma_size; + pix_mp->plane_fmt[1].bytesperline = ctx->buf_width; + pix_mp->plane_fmt[1].sizeimage = ctx->chroma_size; + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* This is run on OUTPUT + The buffer contains compressed image + so width and height have no meaning */ + pix_mp->width = 0; + pix_mp->height = 0; + pix_mp->field = V4L2_FIELD_NONE; + pix_mp->plane_fmt[0].bytesperline = ctx->dec_src_buf_size; + pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size; + pix_mp->pixelformat = ctx->src_fmt->fourcc; + pix_mp->num_planes = ctx->src_fmt->num_planes; + } else { + mfc_err("Format could not be read\n"); + mfc_debug(2, "%s-- with error\n", __func__); + return -EINVAL; + } + mfc_debug_leave(); + return 0; +} + +/* Try format */ +static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_fmt *fmt; + + if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + mfc_err("This node supports decoding only\n"); + return -EINVAL; + } + fmt = find_format(f, MFC_FMT_DEC); + if (!fmt) { + mfc_err("Unsupported format\n"); + return -EINVAL; + } + if (fmt->type != MFC_FMT_DEC) { + mfc_err("\n"); + return -EINVAL; + } + return 0; +} + +/* Set format */ +static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret = 0; + struct s5p_mfc_fmt *fmt; + struct v4l2_pix_format_mplane *pix_mp; + + mfc_debug_enter(); + ret = vidioc_try_fmt(file, priv, f); + pix_mp = &f->fmt.pix_mp; + if (ret) + return ret; + if (ctx->vq_src.streaming || ctx->vq_dst.streaming) { + v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__); + ret = -EBUSY; + goto out; + } + fmt = find_format(f, MFC_FMT_DEC); + if (!fmt || fmt->codec_mode == S5P_FIMV_CODEC_NONE) { + mfc_err("Unknown codec\n"); + ret = -EINVAL; + goto out; + } + if (fmt->type != MFC_FMT_DEC) { + mfc_err("Wrong format selected, you should choose " + "format for decoding\n"); + ret = -EINVAL; + goto out; + } + ctx->src_fmt = fmt; + ctx->codec_mode = fmt->codec_mode; + mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode); + pix_mp->height = 0; + pix_mp->width = 0; + if (pix_mp->plane_fmt[0].sizeimage) + ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage; + else + pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size = + DEF_CPB_SIZE; + pix_mp->plane_fmt[0].bytesperline = 0; + ctx->state = MFCINST_INIT; +out: + mfc_debug_leave(); + return ret; +} + +/* Reqeust buffers */ +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret = 0; + unsigned long flags; + + if (reqbufs->memory != V4L2_MEMORY_MMAP) { + mfc_err("Only V4L2_MEMORY_MAP is supported\n"); + return -EINVAL; + } + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* Can only request buffers after an instance has been opened.*/ + if (ctx->state == MFCINST_INIT) { + ctx->src_bufs_cnt = 0; + if (reqbufs->count == 0) { + mfc_debug(2, "Freeing buffers\n"); + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_src, reqbufs); + s5p_mfc_clock_off(); + return ret; + } + /* Decoding */ + if (ctx->output_state != QUEUE_FREE) { + mfc_err("Bufs have already been requested\n"); + return -EINVAL; + } + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_src, reqbufs); + s5p_mfc_clock_off(); + if (ret) { + mfc_err("vb2_reqbufs on output failed\n"); + return ret; + } + mfc_debug(2, "vb2_reqbufs: %d\n", ret); + ctx->output_state = QUEUE_BUFS_REQUESTED; + } + } else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + ctx->dst_bufs_cnt = 0; + if (reqbufs->count == 0) { + mfc_debug(2, "Freeing buffers\n"); + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + s5p_mfc_clock_off(); + return ret; + } + if (ctx->capture_state != QUEUE_FREE) { + mfc_err("Bufs have already been requested\n"); + return -EINVAL; + } + ctx->capture_state = QUEUE_BUFS_REQUESTED; + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + s5p_mfc_clock_off(); + if (ret) { + mfc_err("vb2_reqbufs on capture failed\n"); + return ret; + } + if (reqbufs->count < ctx->dpb_count) { + mfc_err("Not enough buffers allocated\n"); + reqbufs->count = 0; + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + s5p_mfc_clock_off(); + return -ENOMEM; + } + ctx->total_dpb_count = reqbufs->count; + ret = s5p_mfc_alloc_codec_buffers(ctx); + if (ret) { + mfc_err("Failed to allocate decoding buffers\n"); + reqbufs->count = 0; + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + s5p_mfc_clock_off(); + return -ENOMEM; + } + if (ctx->dst_bufs_cnt == ctx->total_dpb_count) { + ctx->capture_state = QUEUE_BUFS_MMAPED; + } else { + mfc_err("Not all buffers passed to buf_init\n"); + reqbufs->count = 0; + s5p_mfc_clock_on(); + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + s5p_mfc_release_codec_buffers(ctx); + s5p_mfc_clock_off(); + return -ENOMEM; + } + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); + s5p_mfc_wait_for_done_ctx(ctx, + S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET, 0); + } + return ret; +} + +/* Query buffer */ +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret; + int i; + + if (buf->memory != V4L2_MEMORY_MMAP) { + mfc_err("Only mmaped buffers can be used\n"); + return -EINVAL; + } + mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); + if (ctx->state == MFCINST_INIT && + buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = vb2_querybuf(&ctx->vq_src, buf); + } else if (ctx->state == MFCINST_RUNNING && + buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + ret = vb2_querybuf(&ctx->vq_dst, buf); + for (i = 0; i < buf->length; i++) + buf->m.planes[i].m.mem_offset += DST_QUEUE_OFF_BASE; + } else { + mfc_err("vidioc_querybuf called in an inappropriate state\n"); + ret = -EINVAL; + } + mfc_debug_leave(); + return ret; +} + +/* Queue a buffer */ +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (ctx->state == MFCINST_ERROR) { + mfc_err("Call on QBUF after unrecoverable error\n"); + return -EIO; + } + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_qbuf(&ctx->vq_src, buf); + else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_qbuf(&ctx->vq_dst, buf); + return -EINVAL; +} + +/* Dequeue a buffer */ +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (ctx->state == MFCINST_ERROR) { + mfc_err("Call on DQBUF after unrecoverable error\n"); + return -EIO; + } + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK); + else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK); + return -EINVAL; +} + +/* Stream on */ +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + int ret = -EINVAL; + + mfc_debug_enter(); + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + + if (ctx->state == MFCINST_INIT) { + ctx->dst_bufs_cnt = 0; + ctx->src_bufs_cnt = 0; + ctx->capture_state = QUEUE_FREE; + ctx->output_state = QUEUE_FREE; + s5p_mfc_alloc_instance_buffer(ctx); + s5p_mfc_alloc_dec_temp_buffers(ctx); + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_try_run(dev); + + if (s5p_mfc_wait_for_done_ctx(ctx, + S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 0)) { + /* Error or timeout */ + mfc_err("Error getting instance from hardware\n"); + s5p_mfc_release_instance_buffer(ctx); + s5p_mfc_release_dec_desc_buffer(ctx); + return -EIO; + } + mfc_debug(2, "Got instance number: %d\n", ctx->inst_no); + } + ret = vb2_streamon(&ctx->vq_src, type); + } + else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + ret = vb2_streamon(&ctx->vq_dst, type); + mfc_debug_leave(); + return ret; +} + +/* Stream off, which equals to a pause */ +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_streamoff(&ctx->vq_src, type); + else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_streamoff(&ctx->vq_dst, type); + return -EINVAL; +} + +/* Set controls - v4l2 control framework */ +static int s5p_mfc_dec_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl); + + switch (ctrl->id) { + case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY: + ctx->loop_filter_mpeg4 = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE: + ctx->display_delay_enable = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: + ctx->display_delay = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: + ctx->slice_interface = ctrl->val; + break; + default: + mfc_err("Invalid control 0x%08x\n", ctrl->id); + return -EINVAL; + } + return 0; +} + +static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl) +{ + struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl); + struct s5p_mfc_dev *dev = ctx->dev; + + switch (ctrl->id) { + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: + if (ctx->state >= MFCINST_HEAD_PARSED && + ctx->state < MFCINST_ABORT) { + ctrl->val = ctx->dpb_count; + break; + } else if (ctx->state != MFCINST_INIT) { + v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); + return -EINVAL; + } + /* Should wait for the header to be parsed */ + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_wait_for_done_ctx(ctx, + S5P_FIMV_R2H_CMD_SEQ_DONE_RET, 0); + if (ctx->state >= MFCINST_HEAD_PARSED && + ctx->state < MFCINST_ABORT) { + ctrl->val = ctx->dpb_count; + } else { + v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n"); + return -EINVAL; + } + break; + } + return 0; +} + + +static const struct v4l2_ctrl_ops s5p_mfc_dec_ctrl_ops = { + .s_ctrl = s5p_mfc_dec_s_ctrl, + .g_volatile_ctrl = s5p_mfc_dec_g_v_ctrl, +}; + +/* Get cropping information */ +static int vidioc_g_crop(struct file *file, void *priv, + struct v4l2_crop *cr) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + u32 left, right, top, bottom; + + if (ctx->state != MFCINST_HEAD_PARSED && + ctx->state != MFCINST_RUNNING && ctx->state != MFCINST_FINISHING + && ctx->state != MFCINST_FINISHED) { + mfc_err("Cannont set crop\n"); + return -EINVAL; + } + if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_H264) { + left = s5p_mfc_read_shm(ctx, CROP_INFO_H); + right = left >> S5P_FIMV_SHARED_CROP_RIGHT_SHIFT; + left = left & S5P_FIMV_SHARED_CROP_LEFT_MASK; + top = s5p_mfc_read_shm(ctx, CROP_INFO_V); + bottom = top >> S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT; + top = top & S5P_FIMV_SHARED_CROP_TOP_MASK; + cr->c.left = left; + cr->c.top = top; + cr->c.width = ctx->img_width - left - right; + cr->c.height = ctx->img_height - top - bottom; + mfc_debug(2, "Cropping info [h264]: l=%d t=%d " + "w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top, + cr->c.width, cr->c.height, right, bottom, + ctx->buf_width, ctx->buf_height); + } else { + cr->c.left = 0; + cr->c.top = 0; + cr->c.width = ctx->img_width; + cr->c.height = ctx->img_height; + mfc_debug(2, "Cropping info: w=%d h=%d fw=%d " + "fh=%d\n", cr->c.width, cr->c.height, ctx->buf_width, + ctx->buf_height); + } + return 0; +} + +/* v4l2_ioctl_ops */ +static const struct v4l2_ioctl_ops s5p_mfc_dec_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane, + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane, + .vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt, + .vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt, + .vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt, + .vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt, + .vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt, + .vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_crop = vidioc_g_crop, +}; + +static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count, + unsigned int *plane_count, unsigned long psize[], + void *allocators[]) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + + /* Video output for decoding (source) + * this can be set after getting an instance */ + if (ctx->state == MFCINST_INIT && + vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* A single plane is required for input */ + *plane_count = 1; + if (*buf_count < 1) + *buf_count = 1; + if (*buf_count > MFC_MAX_BUFFERS) + *buf_count = MFC_MAX_BUFFERS; + /* Video capture for decoding (destination) + * this can be set after the header was parsed */ + } else if (ctx->state == MFCINST_HEAD_PARSED && + vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + /* Output plane count is 2 - one for Y and one for CbCr */ + *plane_count = 2; + /* Setup buffer count */ + if (*buf_count < ctx->dpb_count) + *buf_count = ctx->dpb_count; + if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB) + *buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB; + if (*buf_count > MFC_MAX_BUFFERS) + *buf_count = MFC_MAX_BUFFERS; + } else { + mfc_err("State seems invalid. State = %d, vq->type = %d\n", + ctx->state, vq->type); + return -EINVAL; + } + mfc_debug(2, "Buffer count=%d, plane count=%d\n", + *buf_count, *plane_count); + if (ctx->state == MFCINST_HEAD_PARSED && + vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + psize[0] = ctx->luma_size; + psize[1] = ctx->chroma_size; + allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX]; + allocators[1] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX]; + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE && + ctx->state == MFCINST_INIT) { + psize[0] = ctx->dec_src_buf_size; + allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX]; + } else { + mfc_err("This video node is dedicated to decoding. Decoding not initalised\n"); + return -EINVAL; + } + return 0; +} + +static void s5p_mfc_unlock(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + + mutex_unlock(&dev->mfc_mutex); +} + +static void s5p_mfc_lock(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + + mutex_lock(&dev->mfc_mutex); +} + +static int s5p_mfc_buf_init(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + unsigned int i; + + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + if (ctx->capture_state == QUEUE_BUFS_MMAPED) + return 0; + for (i = 0; i <= ctx->src_fmt->num_planes ; i++) { + if (IS_ERR_OR_NULL(ERR_PTR( + vb2_dma_contig_plane_paddr(vb, i)))) { + mfc_err("Plane mem not allocated\n"); + return -EINVAL; + } + } + if (vb2_plane_size(vb, 0) < ctx->luma_size || + vb2_plane_size(vb, 1) < ctx->chroma_size) { + mfc_err("Plane buffer (CAPTURE) is too small\n"); + return -EINVAL; + } + i = vb->v4l2_buf.index; + ctx->dst_bufs[i].b = vb; + ctx->dst_bufs[i].cookie.raw.luma = + vb2_dma_contig_plane_paddr(vb, 0); + ctx->dst_bufs[i].cookie.raw.chroma = + vb2_dma_contig_plane_paddr(vb, 1); + ctx->dst_bufs_cnt++; + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (IS_ERR_OR_NULL(ERR_PTR( + vb2_dma_contig_plane_paddr(vb, 0)))) { + mfc_err("Plane memory not allocated\n"); + return -EINVAL; + } + if (vb2_plane_size(vb, 0) < ctx->dec_src_buf_size) { + mfc_err("Plane buffer (OUTPUT) is too small\n"); + return -EINVAL; + } + + i = vb->v4l2_buf.index; + ctx->src_bufs[i].b = vb; + ctx->src_bufs[i].cookie.stream = + vb2_dma_contig_plane_paddr(vb, 0); + ctx->src_bufs_cnt++; + } else { + mfc_err("s5p_mfc_buf_init: unknown queue type\n"); + return -EINVAL; + } + return 0; +} + +static int s5p_mfc_start_streaming(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); + if (ctx->state == MFCINST_FINISHING || + ctx->state == MFCINST_FINISHED) + ctx->state = MFCINST_RUNNING; + /* If context is ready then dev = work->data;schedule it to run */ + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); + return 0; +} + +static int s5p_mfc_stop_streaming(struct vb2_queue *q) +{ + unsigned long flags; + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + int aborted = 0; + + if ((ctx->state == MFCINST_FINISHING || + ctx->state == MFCINST_RUNNING) && + dev->curr_ctx == ctx->num && dev->hw_lock) { + ctx->state = MFCINST_ABORT; + s5p_mfc_wait_for_done_ctx(ctx, + S5P_FIMV_R2H_CMD_FRAME_DONE_RET, 0); + aborted = 1; + } + spin_lock_irqsave(&dev->irqlock, flags); + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); + INIT_LIST_HEAD(&ctx->dst_queue); + ctx->dst_queue_cnt = 0; + ctx->dpb_flush_flag = 1; + ctx->dec_dst_flag = 0; + } + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); + INIT_LIST_HEAD(&ctx->src_queue); + ctx->src_queue_cnt = 0; + } + if (aborted) + ctx->state = MFCINST_RUNNING; + spin_unlock_irqrestore(&dev->irqlock, flags); + return 0; +} + + +static void s5p_mfc_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *mfc_buf; + + if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index]; + mfc_buf->used = 0; + spin_lock_irqsave(&dev->irqlock, flags); + list_add_tail(&mfc_buf->list, &ctx->src_queue); + ctx->src_queue_cnt++; + spin_unlock_irqrestore(&dev->irqlock, flags); + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index]; + mfc_buf->used = 0; + /* Mark destination as available for use by MFC */ + spin_lock_irqsave(&dev->irqlock, flags); + set_bit(vb->v4l2_buf.index, &ctx->dec_dst_flag); + list_add_tail(&mfc_buf->list, &ctx->dst_queue); + ctx->dst_queue_cnt++; + spin_unlock_irqrestore(&dev->irqlock, flags); + } else { + mfc_err("Unsupported buffer type (%d)\n", vq->type); + } + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); +} + +static struct vb2_ops s5p_mfc_dec_qops = { + .queue_setup = s5p_mfc_queue_setup, + .wait_prepare = s5p_mfc_unlock, + .wait_finish = s5p_mfc_lock, + .buf_init = s5p_mfc_buf_init, + .start_streaming = s5p_mfc_start_streaming, + .stop_streaming = s5p_mfc_stop_streaming, + .buf_queue = s5p_mfc_buf_queue, +}; + +struct s5p_mfc_codec_ops *get_dec_codec_ops(void) +{ + return &decoder_codec_ops; +} + +struct vb2_ops *get_dec_queue_ops(void) +{ + return &s5p_mfc_dec_qops; +} + +const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void) +{ + return &s5p_mfc_dec_ioctl_ops; +} + +#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \ + && V4L2_CTRL_DRIVER_PRIV(x)) + +int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx) +{ + struct v4l2_ctrl_config cfg; + int i; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS); + if (ctx->ctrl_handler.error) { + mfc_err("v4l2_ctrl_handler_init failed\n"); + return ctx->ctrl_handler.error; + } + + for (i = 0; i < NUM_CTRLS; i++) { + if (IS_MFC51_PRIV(controls[i].id)) { + cfg.ops = &s5p_mfc_dec_ctrl_ops; + cfg.id = controls[i].id; + cfg.min = controls[i].minimum; + cfg.max = controls[i].maximum; + cfg.def = controls[i].default_value; + cfg.name = controls[i].name; + cfg.type = controls[i].type; + + cfg.step = controls[i].step; + cfg.menu_skip_mask = 0; + + ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler, + &cfg, NULL); + } else { + ctx->ctrls[i] = v4l2_ctrl_new_std(&ctx->ctrl_handler, + &s5p_mfc_dec_ctrl_ops, + controls[i].id, controls[i].minimum, + controls[i].maximum, controls[i].step, + controls[i].default_value); + } + if (ctx->ctrl_handler.error) { + mfc_err("Adding control (%d) failed\n", i); + return ctx->ctrl_handler.error; + } + if (controls[i].is_volatile && ctx->ctrls[i]) + ctx->ctrls[i]->is_volatile = 1; + } + return 0; +} + +void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx) +{ + int i; + + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + for (i = 0; i < NUM_CTRLS; i++) + ctx->ctrls[i] = NULL; +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.h b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h new file mode 100644 index 0000000..fb8b215 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h @@ -0,0 +1,23 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.h + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_DEC_H_ +#define S5P_MFC_DEC_H_ + +struct s5p_mfc_codec_ops *get_dec_codec_ops(void); +struct vb2_ops *get_dec_queue_ops(void); +const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void); +struct s5p_mfc_fmt *get_dec_def_fmt(bool src); +int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx); +void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx); + +#endif /* S5P_MFC_DEC_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c new file mode 100644 index 0000000..fee094a --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -0,0 +1,1829 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Jeongtae Park <jtp.park@samsung.com> + * Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/version.h> +#include <linux/videodev2.h> +#include <linux/workqueue.h> +#include <media/v4l2-ctrls.h> +#include <media/videobuf2-core.h> +#include "regs-mfc.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_enc.h" +#include "s5p_mfc_intr.h" +#include "s5p_mfc_opr.h" + +static struct s5p_mfc_fmt formats[] = { + { + .name = "4:2:0 2 Planes 64x32 Tiles", + .fourcc = V4L2_PIX_FMT_NV12MT, + .codec_mode = S5P_FIMV_CODEC_NONE, + .type = MFC_FMT_RAW, + .num_planes = 2, + }, + { + .name = "4:2:0 2 Planes", + .fourcc = V4L2_PIX_FMT_NV12M, + .codec_mode = S5P_FIMV_CODEC_NONE, + .type = MFC_FMT_RAW, + .num_planes = 2, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H264, + .codec_mode = S5P_FIMV_CODEC_H264_ENC, + .type = MFC_FMT_ENC, + .num_planes = 1, + }, + { + .name = "MPEG4 Encoded Stream", + .fourcc = V4L2_PIX_FMT_MPEG4, + .codec_mode = S5P_FIMV_CODEC_MPEG4_ENC, + .type = MFC_FMT_ENC, + .num_planes = 1, + }, + { + .name = "H264 Encoded Stream", + .fourcc = V4L2_PIX_FMT_H263, + .codec_mode = S5P_FIMV_CODEC_H263_ENC, + .type = MFC_FMT_ENC, + .num_planes = 1, + }, +}; + +#define NUM_FORMATS ARRAY_SIZE(formats) +static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t) +{ + unsigned int i; + + for (i = 0; i < NUM_FORMATS; i++) { + if (formats[i].fourcc == f->fmt.pix_mp.pixelformat && + formats[i].type == t) + return &formats[i]; + } + return NULL; +} + +static struct mfc_control controls[] = { + { + .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE, + .maximum = V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES, + .default_value = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 1, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 1900, + .maximum = (1 << 30) - 1, + .step = 1, + .default_value = 1900, + }, + { + .id = V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Padding Control Enable", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Padding Color YUV Value", + .minimum = 0, + .maximum = (1 << 25) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_BITRATE, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 1, + .maximum = (1 << 30) - 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Rate Control Reaction Coeff.", + .minimum = 1, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Force frame type", + .minimum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED, + .maximum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED, + .default_value = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_VBV_SIZE, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_HEADER_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE, + .maximum = V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME, + .default_value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Frame Skip Enable", + .minimum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED, + .maximum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT, + .menu_skip_mask = 0, + .default_value = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Fixed Target Bit Enable", + .minimum = 0, + .maximum = 1, + .default_value = 0, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_B_FRAMES, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 2, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, + .maximum = V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH, + .default_value = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE, + .menu_skip_mask = ~( + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) | + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) | + (1 << V4L2_MPEG_VIDEO_H264_PROFILE_HIGH) + ), + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_LEVEL, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, + .maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0, + .default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0, + .menu_skip_mask = ~( + (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) | + (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) | + (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) | + (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1) + ), + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0, + .maximum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5, + .default_value = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED, + .maximum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY, + .default_value = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = -6, + .maximum = 6, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = -6, + .maximum = 6, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC, + .maximum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC, + .default_value = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "The Number of Ref. Pic for P", + .minimum = 1, + .maximum = 2, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_MIN_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_MAX_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H263 I-Frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H263_MIN_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H263 Minimum QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H263_MAX_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H263 Maximum QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H263 P frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "H263 B frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "MPEG4 I-Frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "MPEG4 Minimum QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "MPEG4 Maximum QP value", + .minimum = 0, + .maximum = 51, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "MPEG4 P frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "MPEG4 B frame QP value", + .minimum = 1, + .maximum = 31, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "H264 Dark Reg Adaptive RC", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "H264 Smooth Reg Adaptive RC", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "H264 Static Reg Adaptive RC", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "H264 Activity Reg Adaptive RC", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED, + .maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED, + .default_value = 0, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_MPEG_VIDEO_H264_I_PERIOD, + .type = V4L2_CTRL_TYPE_INTEGER, + .minimum = 0, + .maximum = (1 << 16) - 1, + .step = 1, + .default_value = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE, + .type = V4L2_CTRL_TYPE_MENU, + .minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE, + .maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE, + .default_value = 0, + .menu_skip_mask = 0, + }, + { + .id = V4L2_CID_MPEG_VIDEO_MPEG4_QPEL, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, +}; + +#define NUM_CTRLS ARRAY_SIZE(controls) +static const char * const *mfc51_get_menu(u32 id) +{ + static const char * const mfc51_video_frame_skip[] = { + "Disabled", + "Level Limit", + "VBV/CPB Limit", + NULL, + }; + static const char * const mfc51_video_force_frame[] = { + "Disabled", + "I Frame", + "Not Coded", + NULL, + }; + switch (id) { + case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE: + return mfc51_video_frame_skip; + case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE: + return mfc51_video_force_frame; + } + return NULL; +} + +static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx) +{ + mfc_debug(2, "src=%d, dst=%d, state=%d\n", + ctx->src_queue_cnt, ctx->dst_queue_cnt, ctx->state); + /* context is ready to make header */ + if (ctx->state == MFCINST_GOT_INST && ctx->dst_queue_cnt >= 1) + return 1; + /* context is ready to encode a frame */ + if (ctx->state == MFCINST_RUNNING && + ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) + return 1; + /* context is ready to encode remain frames */ + if (ctx->state == MFCINST_FINISHING && + ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1) + return 1; + mfc_debug(2, "ctx is not ready\n"); + return 0; +} + +static void cleanup_ref_queue(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_buf *mb_entry; + unsigned long mb_y_addr, mb_c_addr; + + /* move buffers in ref queue to src queue */ + while (!list_empty(&ctx->ref_queue)) { + mb_entry = list_entry((&ctx->ref_queue)->next, + struct s5p_mfc_buf, list); + mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0); + mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1); + list_del(&mb_entry->list); + ctx->ref_queue_cnt--; + list_add_tail(&mb_entry->list, &ctx->src_queue); + ctx->src_queue_cnt++; + } + mfc_debug(2, "enc src count: %d, enc ref count: %d\n", + ctx->src_queue_cnt, ctx->ref_queue_cnt); + INIT_LIST_HEAD(&ctx->ref_queue); + ctx->ref_queue_cnt = 0; +} + +static int enc_pre_seq_start(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *dst_mb; + unsigned long dst_addr; + unsigned int dst_size; + unsigned long flags; + + spin_lock_irqsave(&dev->irqlock, flags); + dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list); + dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0); + dst_size = vb2_plane_size(dst_mb->b, 0); + s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size); + spin_unlock_irqrestore(&dev->irqlock, flags); + return 0; +} + +static int enc_post_seq_start(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + struct s5p_mfc_buf *dst_mb; + unsigned long flags; + + if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) { + spin_lock_irqsave(&dev->irqlock, flags); + dst_mb = list_entry(ctx->dst_queue.next, + struct s5p_mfc_buf, list); + list_del(&dst_mb->list); + ctx->dst_queue_cnt--; + vb2_set_plane_payload(dst_mb->b, 0, + s5p_mfc_get_enc_strm_size()); + vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE); + spin_unlock_irqrestore(&dev->irqlock, flags); + } + ctx->state = MFCINST_RUNNING; + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); + return 0; +} + +static int enc_pre_frame_start(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *dst_mb; + struct s5p_mfc_buf *src_mb; + unsigned long flags; + unsigned long src_y_addr, src_c_addr, dst_addr; + unsigned int dst_size; + + spin_lock_irqsave(&dev->irqlock, flags); + src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0); + src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1); + s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr); + spin_unlock_irqrestore(&dev->irqlock, flags); + + spin_lock_irqsave(&dev->irqlock, flags); + dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list); + dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0); + dst_size = vb2_plane_size(dst_mb->b, 0); + s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size); + spin_unlock_irqrestore(&dev->irqlock, flags); + + return 0; +} + +static int enc_post_frame_start(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *mb_entry; + unsigned long enc_y_addr, enc_c_addr; + unsigned long mb_y_addr, mb_c_addr; + int slice_type; + unsigned int strm_size; + unsigned long flags; + + slice_type = s5p_mfc_get_enc_slice_type(); + strm_size = s5p_mfc_get_enc_strm_size(); + mfc_debug(2, "Encoded slice type: %d", slice_type); + mfc_debug(2, "Encoded stream size: %d", strm_size); + mfc_debug(2, "Display order: %d", + mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT)); + spin_lock_irqsave(&dev->irqlock, flags); + if (slice_type >= 0) { + s5p_mfc_get_enc_frame_buffer(ctx, &enc_y_addr, &enc_c_addr); + list_for_each_entry(mb_entry, &ctx->src_queue, list) { + mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0); + mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1); + if ((enc_y_addr == mb_y_addr) && + (enc_c_addr == mb_c_addr)) { + list_del(&mb_entry->list); + ctx->src_queue_cnt--; + vb2_buffer_done(mb_entry->b, + VB2_BUF_STATE_DONE); + break; + } + } + list_for_each_entry(mb_entry, &ctx->ref_queue, list) { + mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0); + mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1); + if ((enc_y_addr == mb_y_addr) && + (enc_c_addr == mb_c_addr)) { + list_del(&mb_entry->list); + ctx->ref_queue_cnt--; + vb2_buffer_done(mb_entry->b, + VB2_BUF_STATE_DONE); + break; + } + } + } + if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING)) { + mb_entry = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, + list); + if (mb_entry->used) { + list_del(&mb_entry->list); + ctx->src_queue_cnt--; + list_add_tail(&mb_entry->list, &ctx->ref_queue); + ctx->ref_queue_cnt++; + } + mfc_debug(2, "enc src count: %d, enc ref count: %d\n", + ctx->src_queue_cnt, ctx->ref_queue_cnt); + } + if (strm_size > 0) { + /* at least one more dest. buffers exist always */ + mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, + list); + list_del(&mb_entry->list); + ctx->dst_queue_cnt--; + switch (slice_type) { + case S5P_FIMV_ENC_SI_SLICE_TYPE_I: + mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME; + break; + case S5P_FIMV_ENC_SI_SLICE_TYPE_P: + mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME; + break; + case S5P_FIMV_ENC_SI_SLICE_TYPE_B: + mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_BFRAME; + break; + } + vb2_set_plane_payload(mb_entry->b, 0, strm_size); + vb2_buffer_done(mb_entry->b, VB2_BUF_STATE_DONE); + } + spin_unlock_irqrestore(&dev->irqlock, flags); + if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0)) { + spin_lock(&dev->condlock); + clear_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock(&dev->condlock); + } + return 0; +} + +static struct s5p_mfc_codec_ops encoder_codec_ops = { + .pre_seq_start = enc_pre_seq_start, + .post_seq_start = enc_post_seq_start, + .pre_frame_start = enc_pre_frame_start, + .post_frame_start = enc_post_frame_start, +}; + +/* Query capabilities of the device */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + + strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1); + strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1); + cap->bus_info[0] = 0; + cap->version = KERNEL_VERSION(1, 0, 0); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_VIDEO_OUTPUT + | V4L2_CAP_STREAMING; + return 0; +} + +static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out) +{ + struct s5p_mfc_fmt *fmt; + int i, j = 0; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (mplane && formats[i].num_planes == 1) + continue; + else if (!mplane && formats[i].num_planes > 1) + continue; + if (out && formats[i].type != MFC_FMT_RAW) + continue; + else if (!out && formats[i].type != MFC_FMT_ENC) + continue; + if (j == f->index) { + fmt = &formats[i]; + strlcpy(f->description, fmt->name, + sizeof(f->description)); + f->pixelformat = fmt->fourcc; + return 0; + } + ++j; + } + return -EINVAL; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, false, false); +} + +static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, true, false); +} + +static int vidioc_enum_fmt_vid_out(struct file *file, void *prov, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, false, true); +} + +static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov, + struct v4l2_fmtdesc *f) +{ + return vidioc_enum_fmt(f, true, true); +} + +static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; + + mfc_debug(2, "f->type = %d ctx->state = %d\n", f->type, ctx->state); + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + /* This is run on output (encoder dest) */ + pix_fmt_mp->width = 0; + pix_fmt_mp->height = 0; + pix_fmt_mp->field = V4L2_FIELD_NONE; + pix_fmt_mp->pixelformat = ctx->dst_fmt->fourcc; + pix_fmt_mp->num_planes = ctx->dst_fmt->num_planes; + + pix_fmt_mp->plane_fmt[0].bytesperline = ctx->enc_dst_buf_size; + pix_fmt_mp->plane_fmt[0].sizeimage = ctx->enc_dst_buf_size; + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + /* This is run on capture (encoder src) */ + pix_fmt_mp->width = ctx->img_width; + pix_fmt_mp->height = ctx->img_height; + + pix_fmt_mp->field = V4L2_FIELD_NONE; + pix_fmt_mp->pixelformat = ctx->src_fmt->fourcc; + pix_fmt_mp->num_planes = ctx->src_fmt->num_planes; + + pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width; + pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size; + pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width; + pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size; + } else { + mfc_err("invalid buf type\n"); + return -EINVAL; + } + return 0; +} + +static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_fmt *fmt; + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; + + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + fmt = find_format(f, MFC_FMT_ENC); + if (!fmt) { + mfc_err("failed to try output format\n"); + return -EINVAL; + } + + if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) { + mfc_err("must be set encoding output size\n"); + return -EINVAL; + } + + pix_fmt_mp->plane_fmt[0].bytesperline = + pix_fmt_mp->plane_fmt[0].sizeimage; + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + fmt = find_format(f, MFC_FMT_RAW); + if (!fmt) { + mfc_err("failed to try output format\n"); + return -EINVAL; + } + + if (fmt->num_planes != pix_fmt_mp->num_planes) { + mfc_err("failed to try output format\n"); + return -EINVAL; + } + } else { + mfc_err("invalid buf type\n"); + return -EINVAL; + } + return 0; +} + +static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct s5p_mfc_dev *dev = video_drvdata(file); + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + struct s5p_mfc_fmt *fmt; + struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; + unsigned long flags; + int ret = 0; + + ret = vidioc_try_fmt(file, priv, f); + if (ret) + return ret; + if (ctx->vq_src.streaming || ctx->vq_dst.streaming) { + v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__); + ret = -EBUSY; + goto out; + } + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + fmt = find_format(f, MFC_FMT_ENC); + if (!fmt) { + mfc_err("failed to set capture format\n"); + return -EINVAL; + } + ctx->state = MFCINST_INIT; + ctx->dst_fmt = fmt; + ctx->codec_mode = ctx->dst_fmt->codec_mode; + ctx->enc_dst_buf_size = pix_fmt_mp->plane_fmt[0].sizeimage; + pix_fmt_mp->plane_fmt[0].bytesperline = 0; + ctx->dst_bufs_cnt = 0; + ctx->capture_state = QUEUE_FREE; + s5p_mfc_alloc_instance_buffer(ctx); + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_try_run(dev); + if (s5p_mfc_wait_for_done_ctx(ctx, \ + S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 1)) { + /* Error or timeout */ + mfc_err("Error getting instance from hardware\n"); + s5p_mfc_release_instance_buffer(ctx); + ret = -EIO; + goto out; + } + mfc_debug(2, "Got instance number: %d\n", ctx->inst_no); + } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + fmt = find_format(f, MFC_FMT_RAW); + if (!fmt) { + mfc_err("failed to set output format\n"); + return -EINVAL; + } + if (fmt->num_planes != pix_fmt_mp->num_planes) { + mfc_err("failed to set output format\n"); + ret = -EINVAL; + goto out; + } + ctx->src_fmt = fmt; + ctx->img_width = pix_fmt_mp->width; + ctx->img_height = pix_fmt_mp->height; + mfc_debug(2, "codec number: %d\n", ctx->src_fmt->codec_mode); + mfc_debug(2, "fmt - w: %d, h: %d, ctx - w: %d, h: %d\n", + pix_fmt_mp->width, pix_fmt_mp->height, + ctx->img_width, ctx->img_height); + if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) { + ctx->buf_width = ALIGN(ctx->img_width, + S5P_FIMV_NV12M_HALIGN); + ctx->luma_size = ALIGN(ctx->img_width, + S5P_FIMV_NV12M_HALIGN) * ALIGN(ctx->img_height, + S5P_FIMV_NV12M_LVALIGN); + ctx->chroma_size = ALIGN(ctx->img_width, + S5P_FIMV_NV12M_HALIGN) * ALIGN((ctx->img_height + >> 1), S5P_FIMV_NV12M_CVALIGN); + + ctx->luma_size = ALIGN(ctx->luma_size, + S5P_FIMV_NV12M_SALIGN); + ctx->chroma_size = ALIGN(ctx->chroma_size, + S5P_FIMV_NV12M_SALIGN); + + pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size; + pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width; + pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size; + pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width; + + } else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) { + ctx->buf_width = ALIGN(ctx->img_width, + S5P_FIMV_NV12MT_HALIGN); + ctx->luma_size = ALIGN(ctx->img_width, + S5P_FIMV_NV12MT_HALIGN) * ALIGN(ctx->img_height, + S5P_FIMV_NV12MT_VALIGN); + ctx->chroma_size = ALIGN(ctx->img_width, + S5P_FIMV_NV12MT_HALIGN) * ALIGN((ctx->img_height + >> 1), S5P_FIMV_NV12MT_VALIGN); + ctx->luma_size = ALIGN(ctx->luma_size, + S5P_FIMV_NV12MT_SALIGN); + ctx->chroma_size = ALIGN(ctx->chroma_size, + S5P_FIMV_NV12MT_SALIGN); + + pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size; + pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width; + pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size; + pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width; + } + ctx->src_bufs_cnt = 0; + ctx->output_state = QUEUE_FREE; + } else { + mfc_err("invalid buf type\n"); + return -EINVAL; + } +out: + mfc_debug_leave(); + return ret; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret = 0; + + /* if memory is not mmp or userptr return error */ + if ((reqbufs->memory != V4L2_MEMORY_MMAP) && + (reqbufs->memory != V4L2_MEMORY_USERPTR)) + return -EINVAL; + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + if (ctx->capture_state != QUEUE_FREE) { + mfc_err("invalid capture state: %d\n", + ctx->capture_state); + return -EINVAL; + } + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + if (ret != 0) { + mfc_err("error in vb2_reqbufs() for E(D)\n"); + return ret; + } + ctx->capture_state = QUEUE_BUFS_REQUESTED; + ret = s5p_mfc_alloc_codec_buffers(ctx); + if (ret) { + mfc_err("Failed to allocate encoding buffers\n"); + reqbufs->count = 0; + ret = vb2_reqbufs(&ctx->vq_dst, reqbufs); + return -ENOMEM; + } + } else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (ctx->output_state != QUEUE_FREE) { + mfc_err("invalid output state: %d\n", + ctx->output_state); + return -EINVAL; + } + ret = vb2_reqbufs(&ctx->vq_src, reqbufs); + if (ret != 0) { + mfc_err("error in vb2_reqbufs() for E(S)\n"); + return ret; + } + ctx->output_state = QUEUE_BUFS_REQUESTED; + } else { + mfc_err("invalid buf type\n"); + return -EINVAL; + } + return ret; +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + int ret = 0; + + /* if memory is not mmp or userptr return error */ + if ((buf->memory != V4L2_MEMORY_MMAP) && + (buf->memory != V4L2_MEMORY_USERPTR)) + return -EINVAL; + if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + if (ctx->state != MFCINST_GOT_INST) { + mfc_err("invalid context state: %d\n", ctx->state); + return -EINVAL; + } + ret = vb2_querybuf(&ctx->vq_dst, buf); + if (ret != 0) { + mfc_err("error in vb2_querybuf() for E(D)\n"); + return ret; + } + buf->m.planes[0].m.mem_offset += DST_QUEUE_OFF_BASE; + } else if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = vb2_querybuf(&ctx->vq_src, buf); + if (ret != 0) { + mfc_err("error in vb2_querybuf() for E(S)\n"); + return ret; + } + } else { + mfc_err("invalid buf type\n"); + return -EINVAL; + } + return ret; +} + +/* Queue a buffer */ +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (ctx->state == MFCINST_ERROR) { + mfc_err("Call on QBUF after unrecoverable error\n"); + return -EIO; + } + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_qbuf(&ctx->vq_src, buf); + else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_qbuf(&ctx->vq_dst, buf); + return -EINVAL; +} + +/* Dequeue a buffer */ +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (ctx->state == MFCINST_ERROR) { + mfc_err("Call on DQBUF after unrecoverable error\n"); + return -EIO; + } + if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK); + else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK); + return -EINVAL; +} + +/* Stream on */ +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_streamon(&ctx->vq_src, type); + else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_streamon(&ctx->vq_dst, type); + return -EINVAL; +} + +/* Stream off, which equals to a pause */ +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return vb2_streamoff(&ctx->vq_src, type); + else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + return vb2_streamoff(&ctx->vq_dst, type); + return -EINVAL; +} + +static inline int h264_level(enum v4l2_mpeg_video_h264_level lvl) +{ + static unsigned int t[V4L2_MPEG_VIDEO_H264_LEVEL_4_0 + 1] = { + /* V4L2_MPEG_VIDEO_H264_LEVEL_1_0 */ 10, + /* V4L2_MPEG_VIDEO_H264_LEVEL_1B */ 9, + /* V4L2_MPEG_VIDEO_H264_LEVEL_1_1 */ 11, + /* V4L2_MPEG_VIDEO_H264_LEVEL_1_2 */ 12, + /* V4L2_MPEG_VIDEO_H264_LEVEL_1_3 */ 13, + /* V4L2_MPEG_VIDEO_H264_LEVEL_2_0 */ 20, + /* V4L2_MPEG_VIDEO_H264_LEVEL_2_1 */ 21, + /* V4L2_MPEG_VIDEO_H264_LEVEL_2_2 */ 22, + /* V4L2_MPEG_VIDEO_H264_LEVEL_3_0 */ 30, + /* V4L2_MPEG_VIDEO_H264_LEVEL_3_1 */ 31, + /* V4L2_MPEG_VIDEO_H264_LEVEL_3_2 */ 32, + /* V4L2_MPEG_VIDEO_H264_LEVEL_4_0 */ 40, + }; + return t[lvl]; +} + +static inline int mpeg4_level(enum v4l2_mpeg_video_mpeg4_level lvl) +{ + static unsigned int t[V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 + 1] = { + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0 */ 0, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B */ 9, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_1 */ 1, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_2 */ 2, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3 */ 3, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B */ 7, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_4 */ 4, + /* V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 */ 5, + }; + return t[lvl]; +} + +static inline int vui_sar_idc(enum v4l2_mpeg_video_h264_vui_sar_idc sar) +{ + static unsigned int t[V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED + 1] = { + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED */ 0, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1 */ 1, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11 */ 2, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11 */ 3, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11 */ 4, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33 */ 5, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11 */ 6, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11 */ 7, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11 */ 8, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33 */ 9, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11 */ 10, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11 */ 11, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33 */ 12, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99 */ 13, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3 */ 14, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2 */ 15, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 */ 16, + /* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED */ 255, + }; + return t[sar]; +} + +static int s5p_mfc_enc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl); + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_MPEG_VIDEO_GOP_SIZE: + p->gop_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: + p->slice_mode = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: + p->slice_mb = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES: + p->slice_bit = ctrl->val * 8; + break; + case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB: + p->intra_refresh_mb = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_PADDING: + p->pad = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV: + p->pad_luma = (ctrl->val >> 16) & 0xff; + p->pad_cb = (ctrl->val >> 8) & 0xff; + p->pad_cr = (ctrl->val >> 0) & 0xff; + break; + case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: + p->rc_frame = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_BITRATE: + p->rc_bitrate = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF: + p->rc_reaction_coeff = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE: + ctx->force_frame_type = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_VBV_SIZE: + p->vbv_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE: + p->codec.h264.cpb_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: + p->seq_hdr_mode = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE: + p->frame_skip_mode = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT: + p->fixed_target_bit = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_B_FRAMES: + p->num_b_frame = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_PROFILE: + switch (ctrl->val) { + case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN: + p->codec.h264.profile = + S5P_FIMV_ENC_PROFILE_H264_MAIN; + break; + case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH: + p->codec.h264.profile = + S5P_FIMV_ENC_PROFILE_H264_HIGH; + break; + case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE: + p->codec.h264.profile = + S5P_FIMV_ENC_PROFILE_H264_BASELINE; + break; + default: + ret = -EINVAL; + } + break; + case V4L2_CID_MPEG_VIDEO_H264_LEVEL: + p->codec.h264.level_v4l2 = ctrl->val; + p->codec.h264.level = h264_level(ctrl->val); + if (p->codec.h264.level < 0) { + mfc_err("Level number is wrong\n"); + ret = p->codec.h264.level; + } + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: + p->codec.mpeg4.level_v4l2 = ctrl->val; + p->codec.mpeg4.level = mpeg4_level(ctrl->val); + if (p->codec.mpeg4.level < 0) { + mfc_err("Level number is wrong\n"); + ret = p->codec.mpeg4.level; + } + break; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE: + p->codec.h264.loop_filter_mode = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA: + p->codec.h264.loop_filter_alpha = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA: + p->codec.h264.loop_filter_beta = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE: + p->codec.h264.entropy_mode = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P: + p->codec.h264.num_ref_pic_4p = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM: + p->codec.h264._8x8_transform = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: + p->codec.h264.rc_mb = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP: + p->codec.h264.rc_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_MIN_QP: + p->codec.h264.rc_min_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_MAX_QP: + p->codec.h264.rc_max_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP: + p->codec.h264.rc_p_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP: + p->codec.h264.rc_b_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP: + case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP: + p->codec.mpeg4.rc_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP: + case V4L2_CID_MPEG_VIDEO_H263_MIN_QP: + p->codec.mpeg4.rc_min_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP: + case V4L2_CID_MPEG_VIDEO_H263_MAX_QP: + p->codec.mpeg4.rc_max_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP: + case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP: + p->codec.mpeg4.rc_p_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP: + case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP: + p->codec.mpeg4.rc_b_frame_qp = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK: + p->codec.h264.rc_mb_dark = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH: + p->codec.h264.rc_mb_smooth = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC: + p->codec.h264.rc_mb_static = ctrl->val; + break; + case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY: + p->codec.h264.rc_mb_activity = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE: + p->codec.h264.vui_sar = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: + p->codec.h264.vui_sar_idc = vui_sar_idc(ctrl->val); + break; + case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH: + p->codec.h264.vui_ext_sar_width = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT: + p->codec.h264.vui_ext_sar_height = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: + p->codec.h264.open_gop = !ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD: + p->codec.h264.open_gop_size = ctrl->val; + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: + switch (ctrl->val) { + case V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE: + p->codec.mpeg4.profile = + S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE; + break; + case V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE: + p->codec.mpeg4.profile = + S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE; + break; + default: + ret = -EINVAL; + } + break; + case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL: + p->codec.mpeg4.quarter_pixel = ctrl->val; + break; + default: + v4l2_err(&dev->v4l2_dev, "Invalid control, id=%d, val=%d\n", + ctrl->id, ctrl->val); + ret = -EINVAL; + } + return ret; +} + +static const struct v4l2_ctrl_ops s5p_mfc_enc_ctrl_ops = { + .s_ctrl = s5p_mfc_enc_s_ctrl, +}; + +int vidioc_s_parm(struct file *file, void *priv, struct v4l2_streamparm *a) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ctx->enc_params.rc_framerate_num = + a->parm.output.timeperframe.denominator; + ctx->enc_params.rc_framerate_denom = + a->parm.output.timeperframe.numerator; + } else { + mfc_err("Setting FPS is only possible for the output queue\n"); + return -EINVAL; + } + return 0; +} + +int vidioc_g_parm(struct file *file, void *priv, struct v4l2_streamparm *a) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(priv); + + if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { + a->parm.output.timeperframe.denominator = + ctx->enc_params.rc_framerate_num; + a->parm.output.timeperframe.numerator = + ctx->enc_params.rc_framerate_denom; + } else { + mfc_err("Setting FPS is only possible for the output queue\n"); + return -EINVAL; + } + return 0; +} + +static const struct v4l2_ioctl_ops s5p_mfc_enc_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane, + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out, + .vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane, + .vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt, + .vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt, + .vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt, + .vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt, + .vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt, + .vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_s_parm = vidioc_s_parm, + .vidioc_g_parm = vidioc_g_parm, +}; + +static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb) +{ + int i; + + if (!fmt) + return -EINVAL; + if (fmt->num_planes != vb->num_planes) { + mfc_err("invalid plane number for the format\n"); + return -EINVAL; + } + for (i = 0; i < fmt->num_planes; i++) { + if (!vb2_dma_contig_plane_paddr(vb, i)) { + mfc_err("failed to get plane cookie\n"); + return -EINVAL; + } + mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx", + vb->v4l2_buf.index, i, + vb2_dma_contig_plane_paddr(vb, i)); + } + return 0; +} + +static int s5p_mfc_queue_setup(struct vb2_queue *vq, + unsigned int *buf_count, unsigned int *plane_count, + unsigned long psize[], void *allocators[]) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + + if (ctx->state != MFCINST_GOT_INST) { + mfc_err("inavlid state: %d\n", ctx->state); + return -EINVAL; + } + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + if (ctx->dst_fmt) + *plane_count = ctx->dst_fmt->num_planes; + else + *plane_count = MFC_ENC_CAP_PLANE_COUNT; + if (*buf_count < 1) + *buf_count = 1; + if (*buf_count > MFC_MAX_BUFFERS) + *buf_count = MFC_MAX_BUFFERS; + psize[0] = ctx->enc_dst_buf_size; + allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX]; + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + if (ctx->src_fmt) + *plane_count = ctx->src_fmt->num_planes; + else + *plane_count = MFC_ENC_OUT_PLANE_COUNT; + + if (*buf_count < 1) + *buf_count = 1; + if (*buf_count > MFC_MAX_BUFFERS) + *buf_count = MFC_MAX_BUFFERS; + psize[0] = ctx->luma_size; + psize[1] = ctx->chroma_size; + allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX]; + allocators[1] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX]; + } else { + mfc_err("inavlid queue type: %d\n", vq->type); + return -EINVAL; + } + return 0; +} + +static void s5p_mfc_unlock(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + + mutex_unlock(&dev->mfc_mutex); +} + +static void s5p_mfc_lock(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + + mutex_lock(&dev->mfc_mutex); +} + +static int s5p_mfc_buf_init(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + unsigned int i; + int ret; + + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + ret = check_vb_with_fmt(ctx->dst_fmt, vb); + if (ret < 0) + return ret; + i = vb->v4l2_buf.index; + ctx->dst_bufs[i].b = vb; + ctx->dst_bufs[i].cookie.stream = + vb2_dma_contig_plane_paddr(vb, 0); + ctx->dst_bufs_cnt++; + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = check_vb_with_fmt(ctx->src_fmt, vb); + if (ret < 0) + return ret; + i = vb->v4l2_buf.index; + ctx->src_bufs[i].b = vb; + ctx->src_bufs[i].cookie.raw.luma = + vb2_dma_contig_plane_paddr(vb, 0); + ctx->src_bufs[i].cookie.raw.chroma = + vb2_dma_contig_plane_paddr(vb, 1); + ctx->src_bufs_cnt++; + } else { + mfc_err("inavlid queue type: %d\n", vq->type); + return -EINVAL; + } + return 0; +} + +static int s5p_mfc_buf_prepare(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + int ret; + + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + ret = check_vb_with_fmt(ctx->dst_fmt, vb); + if (ret < 0) + return ret; + mfc_debug(2, "plane size: %ld, dst size: %d\n", + vb2_plane_size(vb, 0), ctx->enc_dst_buf_size); + if (vb2_plane_size(vb, 0) < ctx->enc_dst_buf_size) { + mfc_err("plane size is too small for capture\n"); + return -EINVAL; + } + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + ret = check_vb_with_fmt(ctx->src_fmt, vb); + if (ret < 0) + return ret; + mfc_debug(2, "plane size: %ld, luma size: %d\n", + vb2_plane_size(vb, 0), ctx->luma_size); + mfc_debug(2, "plane size: %ld, chroma size: %d\n", + vb2_plane_size(vb, 1), ctx->chroma_size); + if (vb2_plane_size(vb, 0) < ctx->luma_size || + vb2_plane_size(vb, 1) < ctx->chroma_size) { + mfc_err("plane size is too small for output\n"); + return -EINVAL; + } + } else { + mfc_err("inavlid queue type: %d\n", vq->type); + return -EINVAL; + } + return 0; +} + +static int s5p_mfc_start_streaming(struct vb2_queue *q) +{ + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); + /* If context is ready then dev = work->data;schedule it to run */ + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); + return 0; +} + +static int s5p_mfc_stop_streaming(struct vb2_queue *q) +{ + unsigned long flags; + struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + + if ((ctx->state == MFCINST_FINISHING || + ctx->state == MFCINST_RUNNING) && + dev->curr_ctx == ctx->num && dev->hw_lock) { + ctx->state = MFCINST_ABORT; + s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_FRAME_DONE_RET, + 0); + } + ctx->state = MFCINST_FINISHED; + spin_lock_irqsave(&dev->irqlock, flags); + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst); + INIT_LIST_HEAD(&ctx->dst_queue); + ctx->dst_queue_cnt = 0; + } + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + cleanup_ref_queue(ctx); + s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src); + INIT_LIST_HEAD(&ctx->src_queue); + ctx->src_queue_cnt = 0; + } + spin_unlock_irqrestore(&dev->irqlock, flags); + return 0; +} + +static void s5p_mfc_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_queue *vq = vb->vb2_queue; + struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv); + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *mfc_buf; + + if (ctx->state == MFCINST_ERROR) { + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); + cleanup_ref_queue(ctx); + return; + } + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) { + mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index]; + mfc_buf->used = 0; + /* Mark destination as available for use by MFC */ + spin_lock_irqsave(&dev->irqlock, flags); + list_add_tail(&mfc_buf->list, &ctx->dst_queue); + ctx->dst_queue_cnt++; + spin_unlock_irqrestore(&dev->irqlock, flags); + } else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index]; + mfc_buf->used = 0; + spin_lock_irqsave(&dev->irqlock, flags); + if (vb->v4l2_planes[0].bytesused == 0) { + mfc_debug(1, "change state to FINISHING\n"); + ctx->state = MFCINST_FINISHING; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + cleanup_ref_queue(ctx); + } else { + list_add_tail(&mfc_buf->list, &ctx->src_queue); + ctx->src_queue_cnt++; + } + spin_unlock_irqrestore(&dev->irqlock, flags); + } else { + mfc_err("unsupported buffer type (%d)\n", vq->type); + } + if (s5p_mfc_ctx_ready(ctx)) { + spin_lock_irqsave(&dev->condlock, flags); + set_bit(ctx->num, &dev->ctx_work_bits); + spin_unlock_irqrestore(&dev->condlock, flags); + } + s5p_mfc_try_run(dev); +} + +static struct vb2_ops s5p_mfc_enc_qops = { + .queue_setup = s5p_mfc_queue_setup, + .wait_prepare = s5p_mfc_unlock, + .wait_finish = s5p_mfc_lock, + .buf_init = s5p_mfc_buf_init, + .buf_prepare = s5p_mfc_buf_prepare, + .start_streaming = s5p_mfc_start_streaming, + .stop_streaming = s5p_mfc_stop_streaming, + .buf_queue = s5p_mfc_buf_queue, +}; + +struct s5p_mfc_codec_ops *get_enc_codec_ops(void) +{ + return &encoder_codec_ops; +} + +struct vb2_ops *get_enc_queue_ops(void) +{ + return &s5p_mfc_enc_qops; +} + +const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void) +{ + return &s5p_mfc_enc_ioctl_ops; +} + +#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \ + && V4L2_CTRL_DRIVER_PRIV(x)) + +int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx) +{ + struct v4l2_ctrl_config cfg; + int i; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS); + if (ctx->ctrl_handler.error) { + mfc_err("v4l2_ctrl_handler_init failed\n"); + return ctx->ctrl_handler.error; + } + for (i = 0; i < NUM_CTRLS; i++) { + if (IS_MFC51_PRIV(controls[i].id)) { + cfg.ops = &s5p_mfc_enc_ctrl_ops; + cfg.id = controls[i].id; + cfg.min = controls[i].minimum; + cfg.max = controls[i].maximum; + cfg.def = controls[i].default_value; + cfg.name = controls[i].name; + cfg.type = controls[i].type; + cfg.flags = 0; + + if (cfg.type == V4L2_CTRL_TYPE_MENU) { + cfg.step = 0; + cfg.menu_skip_mask = cfg.menu_skip_mask; + cfg.qmenu = mfc51_get_menu(cfg.id); + } else { + cfg.step = controls[i].step; + cfg.menu_skip_mask = 0; + } + ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler, + &cfg, NULL); + } else { + if (controls[i].type == V4L2_CTRL_TYPE_MENU) { + ctx->ctrls[i] = v4l2_ctrl_new_std_menu( + &ctx->ctrl_handler, + &s5p_mfc_enc_ctrl_ops, controls[i].id, + controls[i].maximum, 0, + controls[i].default_value); + } else { + ctx->ctrls[i] = v4l2_ctrl_new_std( + &ctx->ctrl_handler, + &s5p_mfc_enc_ctrl_ops, controls[i].id, + controls[i].minimum, + controls[i].maximum, controls[i].step, + controls[i].default_value); + } + } + if (ctx->ctrl_handler.error) { + mfc_err("Adding control (%d) failed\n", i); + return ctx->ctrl_handler.error; + } + if (controls[i].is_volatile && ctx->ctrls[i]) + ctx->ctrls[i]->is_volatile = 1; + } + return 0; +} + +void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx) +{ + int i; + + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + for (i = 0; i < NUM_CTRLS; i++) + ctx->ctrls[i] = NULL; +} diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.h b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h new file mode 100644 index 0000000..405bdd3 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h @@ -0,0 +1,23 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.h + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_ENC_H_ +#define S5P_MFC_ENC_H_ + +struct s5p_mfc_codec_ops *get_enc_codec_ops(void); +struct vb2_ops *get_enc_queue_ops(void); +const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void); +struct s5p_mfc_fmt *get_enc_def_fmt(bool src); +int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx); +void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx); + +#endif /* S5P_MFC_ENC_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.c b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c new file mode 100644 index 0000000..8f2f8bf --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c @@ -0,0 +1,92 @@ +/* + * drivers/media/video/samsung/mfc5/s5p_mfc_intr.c + * + * C file for Samsung MFC (Multi Function Codec - FIMV) driver + * This file contains functions used to wait for command completion. + * + * Kamil Debski, Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include "regs-mfc.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_intr.h" + +int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command) +{ + int ret; + + ret = wait_event_interruptible_timeout(dev->queue, + (dev->int_cond && (dev->int_type == command + || dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET)), + msecs_to_jiffies(MFC_INT_TIMEOUT)); + if (ret == 0) { + mfc_err("Interrupt (dev->int_type:%d, command:%d) timed out\n", + dev->int_type, command); + return 1; + } else if (ret == -ERESTARTSYS) { + mfc_err("Interrupted by a signal\n"); + return 1; + } + mfc_debug(1, "Finished waiting (dev->int_type:%d, command: %d)\n", + dev->int_type, command); + if (dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET) + return 1; + return 0; +} + +void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev) +{ + dev->int_cond = 0; + dev->int_type = 0; + dev->int_err = 0; +} + +int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx, + int command, int interrupt) +{ + int ret; + + if (interrupt) { + ret = wait_event_interruptible_timeout(ctx->queue, + (ctx->int_cond && (ctx->int_type == command + || ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)), + msecs_to_jiffies(MFC_INT_TIMEOUT)); + } else { + ret = wait_event_timeout(ctx->queue, + (ctx->int_cond && (ctx->int_type == command + || ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)), + msecs_to_jiffies(MFC_INT_TIMEOUT)); + } + if (ret == 0) { + mfc_err("Interrupt (ctx->int_type:%d, command:%d) timed out\n", + ctx->int_type, command); + return 1; + } else if (ret == -ERESTARTSYS) { + mfc_err("Interrupted by a signal\n"); + return 1; + } + mfc_debug(1, "Finished waiting (ctx->int_type:%d, command: %d)\n", + ctx->int_type, command); + if (ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET) + return 1; + return 0; +} + +void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx) +{ + ctx->int_cond = 0; + ctx->int_type = 0; + ctx->int_err = 0; +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.h b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h new file mode 100644 index 0000000..122d773 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h @@ -0,0 +1,26 @@ +/* + * drivers/media/video/samsung/mfc5/s5p_mfc_intr.h + * + * Header file for Samsung MFC (Multi Function Codec - FIMV) driver + * It contains waiting functions declarations. + * + * Kamil Debski, Copyright (C) 2011 Samsung Electronics + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef S5P_MFC_INTR_H_ +#define S5P_MFC_INTR_H_ + +#include "s5p_mfc_common.h" + +int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx, + int command, int interrupt); +int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command); +void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx); +void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev); + +#endif /* S5P_MFC_INTR_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c new file mode 100644 index 0000000..7b23916 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c @@ -0,0 +1,1397 @@ +/* + * drivers/media/video/samsung/mfc5/s5p_mfc_opr.c + * + * Samsung MFC (Multi Function Codec - FIMV) driver + * This file contains hw related functions. + * + * Kamil Debski, Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "regs-mfc.h" +#include "s5p_mfc_cmd.h" +#include "s5p_mfc_common.h" +#include "s5p_mfc_ctrl.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_intr.h" +#include "s5p_mfc_opr.h" +#include "s5p_mfc_pm.h" +#include "s5p_mfc_shm.h" +#include <asm/cacheflush.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/mm.h> +#include <linux/sched.h> + +#define OFFSETA(x) (((x) - dev->bank1) >> MFC_OFFSET_SHIFT) +#define OFFSETB(x) (((x) - dev->bank2) >> MFC_OFFSET_SHIFT) + +/* Allocate temporary buffers for decoding */ +int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx) +{ + void *desc_virt; + struct s5p_mfc_dev *dev = ctx->dev; + + ctx->desc_buf = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], DESC_BUF_SIZE); + if (IS_ERR_VALUE((int)ctx->desc_buf)) { + ctx->desc_buf = 0; + mfc_err("Allocating DESC buffer failed\n"); + return -ENOMEM; + } + ctx->desc_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->desc_buf); + BUG_ON(ctx->desc_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); + desc_virt = vb2_dma_contig_memops.vaddr(ctx->desc_buf); + if (desc_virt == NULL) { + vb2_dma_contig_memops.put(ctx->desc_buf); + ctx->desc_phys = 0; + ctx->desc_buf = 0; + mfc_err("Remapping DESC buffer failed\n"); + return -ENOMEM; + } + memset(desc_virt, 0, DESC_BUF_SIZE); + wmb(); + return 0; +} + +/* Release temporary buffers for decoding */ +void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx) +{ + if (ctx->desc_phys) { + vb2_dma_contig_memops.put(ctx->desc_buf); + ctx->desc_phys = 0; + ctx->desc_buf = 0; + } +} + +/* Allocate codec buffers */ +int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned int enc_ref_y_size = 0; + unsigned int enc_ref_c_size = 0; + unsigned int guard_width, guard_height; + + if (ctx->type == MFCINST_DECODER) { + mfc_debug(2, "Luma size:%d Chroma size:%d MV size:%d\n", + ctx->luma_size, ctx->chroma_size, ctx->mv_size); + mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count); + } else if (ctx->type == MFCINST_ENCODER) { + enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN) + * ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN); + enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN); + + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) { + enc_ref_c_size = ALIGN(ctx->img_width, + S5P_FIMV_NV12MT_HALIGN) + * ALIGN(ctx->img_height >> 1, + S5P_FIMV_NV12MT_VALIGN); + enc_ref_c_size = ALIGN(enc_ref_c_size, + S5P_FIMV_NV12MT_SALIGN); + } else { + guard_width = ALIGN(ctx->img_width + 16, + S5P_FIMV_NV12MT_HALIGN); + guard_height = ALIGN((ctx->img_height >> 1) + 4, + S5P_FIMV_NV12MT_VALIGN); + enc_ref_c_size = ALIGN(guard_width * guard_height, + S5P_FIMV_NV12MT_SALIGN); + } + mfc_debug(2, "recon luma size: %d chroma size: %d\n", + enc_ref_y_size, enc_ref_c_size); + } else { + return -EINVAL; + } + /* Codecs have different memory requirements */ + switch (ctx->codec_mode) { + case S5P_FIMV_CODEC_H264_DEC: + ctx->bank1_size = + ALIGN(S5P_FIMV_DEC_NB_IP_SIZE + + S5P_FIMV_DEC_VERT_NB_MV_SIZE, + S5P_FIMV_DEC_BUF_ALIGN); + ctx->bank2_size = ctx->total_dpb_count * ctx->mv_size; + break; + case S5P_FIMV_CODEC_MPEG4_DEC: + ctx->bank1_size = + ALIGN(S5P_FIMV_DEC_NB_DCAC_SIZE + + S5P_FIMV_DEC_UPNB_MV_SIZE + + S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE + + S5P_FIMV_DEC_STX_PARSER_SIZE + + S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE, + S5P_FIMV_DEC_BUF_ALIGN); + ctx->bank2_size = 0; + break; + case S5P_FIMV_CODEC_VC1RCV_DEC: + case S5P_FIMV_CODEC_VC1_DEC: + ctx->bank1_size = + ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE + + S5P_FIMV_DEC_UPNB_MV_SIZE + + S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE + + S5P_FIMV_DEC_NB_DCAC_SIZE + + 3 * S5P_FIMV_DEC_VC1_BITPLANE_SIZE, + S5P_FIMV_DEC_BUF_ALIGN); + ctx->bank2_size = 0; + break; + case S5P_FIMV_CODEC_MPEG2_DEC: + ctx->bank1_size = 0; + ctx->bank2_size = 0; + break; + case S5P_FIMV_CODEC_H263_DEC: + ctx->bank1_size = + ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE + + S5P_FIMV_DEC_UPNB_MV_SIZE + + S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE + + S5P_FIMV_DEC_NB_DCAC_SIZE, + S5P_FIMV_DEC_BUF_ALIGN); + ctx->bank2_size = 0; + break; + case S5P_FIMV_CODEC_H264_ENC: + ctx->bank1_size = (enc_ref_y_size * 2) + + S5P_FIMV_ENC_UPMV_SIZE + + S5P_FIMV_ENC_COLFLG_SIZE + + S5P_FIMV_ENC_INTRAMD_SIZE + + S5P_FIMV_ENC_NBORINFO_SIZE; + ctx->bank2_size = (enc_ref_y_size * 2) + + (enc_ref_c_size * 4) + + S5P_FIMV_ENC_INTRAPRED_SIZE; + break; + case S5P_FIMV_CODEC_MPEG4_ENC: + ctx->bank1_size = (enc_ref_y_size * 2) + + S5P_FIMV_ENC_UPMV_SIZE + + S5P_FIMV_ENC_COLFLG_SIZE + + S5P_FIMV_ENC_ACDCCOEF_SIZE; + ctx->bank2_size = (enc_ref_y_size * 2) + + (enc_ref_c_size * 4); + break; + case S5P_FIMV_CODEC_H263_ENC: + ctx->bank1_size = (enc_ref_y_size * 2) + + S5P_FIMV_ENC_UPMV_SIZE + + S5P_FIMV_ENC_ACDCCOEF_SIZE; + ctx->bank2_size = (enc_ref_y_size * 2) + + (enc_ref_c_size * 4); + break; + default: + break; + } + /* Allocate only if memory from bank 1 is necessary */ + if (ctx->bank1_size > 0) { + ctx->bank1_buf = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_size); + if (IS_ERR(ctx->bank1_buf)) { + ctx->bank1_buf = 0; + printk(KERN_ERR + "Buf alloc for decoding failed (port A)\n"); + return -ENOMEM; + } + ctx->bank1_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_buf); + BUG_ON(ctx->bank1_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); + } + /* Allocate only if memory from bank 2 is necessary */ + if (ctx->bank2_size > 0) { + ctx->bank2_buf = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_size); + if (IS_ERR(ctx->bank2_buf)) { + ctx->bank2_buf = 0; + mfc_err("Buf alloc for decoding failed (port B)\n"); + return -ENOMEM; + } + ctx->bank2_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_buf); + BUG_ON(ctx->bank2_phys & ((1 << MFC_BANK2_ALIGN_ORDER) - 1)); + } + return 0; +} + +/* Release buffers allocated for codec */ +void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx) +{ + if (ctx->bank1_buf) { + vb2_dma_contig_memops.put(ctx->bank1_buf); + ctx->bank1_buf = 0; + ctx->bank1_phys = 0; + ctx->bank1_size = 0; + } + if (ctx->bank2_buf) { + vb2_dma_contig_memops.put(ctx->bank2_buf); + ctx->bank2_buf = 0; + ctx->bank2_phys = 0; + ctx->bank2_size = 0; + } +} + +/* Allocate memory for instance data buffer */ +int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx) +{ + void *context_virt; + struct s5p_mfc_dev *dev = ctx->dev; + + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC || + ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) + ctx->ctx_size = MFC_H264_CTX_BUF_SIZE; + else + ctx->ctx_size = MFC_CTX_BUF_SIZE; + ctx->ctx_buf = vb2_dma_contig_memops.alloc( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_size); + if (IS_ERR(ctx->ctx_buf)) { + mfc_err("Allocating context buffer failed\n"); + ctx->ctx_phys = 0; + ctx->ctx_buf = 0; + return -ENOMEM; + } + ctx->ctx_phys = s5p_mfc_mem_cookie( + dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_buf); + BUG_ON(ctx->ctx_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); + ctx->ctx_ofs = OFFSETA(ctx->ctx_phys); + context_virt = vb2_dma_contig_memops.vaddr(ctx->ctx_buf); + if (context_virt == NULL) { + mfc_err("Remapping instance buffer failed\n"); + vb2_dma_contig_memops.put(ctx->ctx_buf); + ctx->ctx_phys = 0; + ctx->ctx_buf = 0; + return -ENOMEM; + } + /* Zero content of the allocated memory */ + memset(context_virt, 0, ctx->ctx_size); + wmb(); + if (s5p_mfc_init_shm(ctx) < 0) { + vb2_dma_contig_memops.put(ctx->ctx_buf); + ctx->ctx_phys = 0; + ctx->ctx_buf = 0; + return -ENOMEM; + } + return 0; +} + +/* Release instance buffer */ +void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx) +{ + if (ctx->ctx_buf) { + vb2_dma_contig_memops.put(ctx->ctx_buf); + ctx->ctx_phys = 0; + ctx->ctx_buf = 0; + } + if (ctx->shm_alloc) { + vb2_dma_contig_memops.put(ctx->shm_alloc); + ctx->shm_alloc = 0; + ctx->shm = 0; + } +} + +/* Set registers for decoding temporary buffers */ +void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + mfc_write(dev, OFFSETA(ctx->desc_phys), S5P_FIMV_SI_CH0_DESC_ADR); + mfc_write(dev, DESC_BUF_SIZE, S5P_FIMV_SI_CH0_DESC_SIZE); +} + +/* Set registers for shared buffer */ +void s5p_mfc_set_shared_buffer(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + mfc_write(dev, ctx->shm_ofs, S5P_FIMV_SI_CH0_HOST_WR_ADR); +} + +/* Set registers for decoding stream buffer */ +int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr, + unsigned int start_num_byte, unsigned int buf_size) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + mfc_write(dev, OFFSETA(buf_addr), S5P_FIMV_SI_CH0_SB_ST_ADR); + mfc_write(dev, ctx->dec_src_buf_size, S5P_FIMV_SI_CH0_CPB_SIZE); + mfc_write(dev, buf_size, S5P_FIMV_SI_CH0_SB_FRM_SIZE); + s5p_mfc_write_shm(ctx, start_num_byte, START_BYTE_NUM); + return 0; +} + +/* Set decoding frame buffer */ +int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx) +{ + unsigned int frame_size, i; + unsigned int frame_size_ch, frame_size_mv; + struct s5p_mfc_dev *dev = ctx->dev; + unsigned int dpb; + size_t buf_addr1, buf_addr2; + int buf_size1, buf_size2; + + buf_addr1 = ctx->bank1_phys; + buf_size1 = ctx->bank1_size; + buf_addr2 = ctx->bank2_phys; + buf_size2 = ctx->bank2_size; + dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) & + ~S5P_FIMV_DPB_COUNT_MASK; + mfc_write(dev, ctx->total_dpb_count | dpb, + S5P_FIMV_SI_CH0_DPB_CONF_CTRL); + s5p_mfc_set_shared_buffer(ctx); + switch (ctx->codec_mode) { + case S5P_FIMV_CODEC_H264_DEC: + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_H264_VERT_NB_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_VERT_NB_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_VERT_NB_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_NB_IP_ADR); + buf_addr1 += S5P_FIMV_DEC_NB_IP_SIZE; + buf_size1 -= S5P_FIMV_DEC_NB_IP_SIZE; + break; + case S5P_FIMV_CODEC_MPEG4_DEC: + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_NB_DCAC_ADR); + buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE; + buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_NB_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SA_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SP_ADR); + buf_addr1 += S5P_FIMV_DEC_STX_PARSER_SIZE; + buf_size1 -= S5P_FIMV_DEC_STX_PARSER_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_OT_LINE_ADR); + buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + break; + case S5P_FIMV_CODEC_H263_DEC: + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_OT_LINE_ADR); + buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_NB_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_SA_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_NB_DCAC_ADR); + buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE; + buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE; + break; + case S5P_FIMV_CODEC_VC1_DEC: + case S5P_FIMV_CODEC_VC1RCV_DEC: + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_NB_DCAC_ADR); + buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE; + buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_OT_LINE_ADR); + buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_UP_NB_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_SA_MV_ADR); + buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE3_ADR); + buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE2_ADR); + buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE1_ADR); + buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE; + break; + case S5P_FIMV_CODEC_MPEG2_DEC: + break; + default: + mfc_err("Unknown codec for decoding (%x)\n", + ctx->codec_mode); + return -EINVAL; + break; + } + frame_size = ctx->luma_size; + frame_size_ch = ctx->chroma_size; + frame_size_mv = ctx->mv_size; + mfc_debug(2, "Frm size: %d ch: %d mv: %d\n", frame_size, frame_size_ch, + frame_size_mv); + for (i = 0; i < ctx->total_dpb_count; i++) { + /* Bank2 */ + mfc_debug(2, "Luma %d: %x\n", i, + ctx->dst_bufs[i].cookie.raw.luma); + mfc_write(dev, OFFSETB(ctx->dst_bufs[i].cookie.raw.luma), + S5P_FIMV_DEC_LUMA_ADR + i * 4); + mfc_debug(2, "\tChroma %d: %x\n", i, + ctx->dst_bufs[i].cookie.raw.chroma); + mfc_write(dev, OFFSETA(ctx->dst_bufs[i].cookie.raw.chroma), + S5P_FIMV_DEC_CHROMA_ADR + i * 4); + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) { + mfc_debug(2, "\tBuf2: %x, size: %d\n", + buf_addr2, buf_size2); + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_H264_MV_ADR + i * 4); + buf_addr2 += frame_size_mv; + buf_size2 -= frame_size_mv; + } + } + mfc_debug(2, "Buf1: %u, buf_size1: %d\n", buf_addr1, buf_size1); + mfc_debug(2, "Buf 1/2 size after: %d/%d (frames %d)\n", + buf_size1, buf_size2, ctx->total_dpb_count); + if (buf_size1 < 0 || buf_size2 < 0) { + mfc_debug(2, "Not enough memory has been allocated\n"); + return -ENOMEM; + } + s5p_mfc_write_shm(ctx, frame_size, ALLOC_LUMA_DPB_SIZE); + s5p_mfc_write_shm(ctx, frame_size_ch, ALLOC_CHROMA_DPB_SIZE); + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) + s5p_mfc_write_shm(ctx, frame_size_mv, ALLOC_MV_SIZE); + mfc_write(dev, ((S5P_FIMV_CH_INIT_BUFS & S5P_FIMV_CH_MASK) + << S5P_FIMV_CH_SHIFT) | (ctx->inst_no), + S5P_FIMV_SI_CH0_INST_ID); + return 0; +} + +/* Set registers for encoding stream buffer */ +int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx, + unsigned long addr, unsigned int size) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + mfc_write(dev, OFFSETA(addr), S5P_FIMV_ENC_SI_CH0_SB_ADR); + mfc_write(dev, size, S5P_FIMV_ENC_SI_CH0_SB_SIZE); + return 0; +} + +void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx, + unsigned long y_addr, unsigned long c_addr) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + mfc_write(dev, OFFSETB(y_addr), S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR); + mfc_write(dev, OFFSETB(c_addr), S5P_FIMV_ENC_SI_CH0_CUR_C_ADR); +} + +void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx, + unsigned long *y_addr, unsigned long *c_addr) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + *y_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR) + << MFC_OFFSET_SHIFT); + *c_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR) + << MFC_OFFSET_SHIFT); +} + +/* Set encoding ref & codec buffer */ +int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + size_t buf_addr1, buf_addr2; + size_t buf_size1, buf_size2; + unsigned int enc_ref_y_size, enc_ref_c_size; + unsigned int guard_width, guard_height; + int i; + + buf_addr1 = ctx->bank1_phys; + buf_size1 = ctx->bank1_size; + buf_addr2 = ctx->bank2_phys; + buf_size2 = ctx->bank2_size; + enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN) + * ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN); + enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN); + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) { + enc_ref_c_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN) + * ALIGN((ctx->img_height >> 1), S5P_FIMV_NV12MT_VALIGN); + enc_ref_c_size = ALIGN(enc_ref_c_size, S5P_FIMV_NV12MT_SALIGN); + } else { + guard_width = ALIGN(ctx->img_width + 16, + S5P_FIMV_NV12MT_HALIGN); + guard_height = ALIGN((ctx->img_height >> 1) + 4, + S5P_FIMV_NV12MT_VALIGN); + enc_ref_c_size = ALIGN(guard_width * guard_height, + S5P_FIMV_NV12MT_SALIGN); + } + mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", buf_size1, buf_size2); + switch (ctx->codec_mode) { + case S5P_FIMV_CODEC_H264_ENC: + for (i = 0; i < 2; i++) { + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i)); + buf_addr1 += enc_ref_y_size; + buf_size1 -= enc_ref_y_size; + + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i)); + buf_addr2 += enc_ref_y_size; + buf_size2 -= enc_ref_y_size; + } + for (i = 0; i < 4; i++) { + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i)); + buf_addr2 += enc_ref_c_size; + buf_size2 -= enc_ref_c_size; + } + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_UP_MV_ADR); + buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE; + buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_H264_COZERO_FLAG_ADR); + buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE; + buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_H264_UP_INTRA_MD_ADR); + buf_addr1 += S5P_FIMV_ENC_INTRAMD_SIZE; + buf_size1 -= S5P_FIMV_ENC_INTRAMD_SIZE; + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_H264_UP_INTRA_PRED_ADR); + buf_addr2 += S5P_FIMV_ENC_INTRAPRED_SIZE; + buf_size2 -= S5P_FIMV_ENC_INTRAPRED_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_H264_NBOR_INFO_ADR); + buf_addr1 += S5P_FIMV_ENC_NBORINFO_SIZE; + buf_size1 -= S5P_FIMV_ENC_NBORINFO_SIZE; + mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", + buf_size1, buf_size2); + break; + case S5P_FIMV_CODEC_MPEG4_ENC: + for (i = 0; i < 2; i++) { + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i)); + buf_addr1 += enc_ref_y_size; + buf_size1 -= enc_ref_y_size; + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i)); + buf_addr2 += enc_ref_y_size; + buf_size2 -= enc_ref_y_size; + } + for (i = 0; i < 4; i++) { + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i)); + buf_addr2 += enc_ref_c_size; + buf_size2 -= enc_ref_c_size; + } + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_MV_ADR); + buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE; + buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_MPEG4_COZERO_FLAG_ADR); + buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE; + buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_MPEG4_ACDC_COEF_ADR); + buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE; + buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE; + mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", + buf_size1, buf_size2); + break; + case S5P_FIMV_CODEC_H263_ENC: + for (i = 0; i < 2; i++) { + mfc_write(dev, OFFSETA(buf_addr1), + S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i)); + buf_addr1 += enc_ref_y_size; + buf_size1 -= enc_ref_y_size; + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i)); + buf_addr2 += enc_ref_y_size; + buf_size2 -= enc_ref_y_size; + } + for (i = 0; i < 4; i++) { + mfc_write(dev, OFFSETB(buf_addr2), + S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i)); + buf_addr2 += enc_ref_c_size; + buf_size2 -= enc_ref_c_size; + } + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_MV_ADR); + buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE; + buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE; + mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_ACDC_COEF_ADR); + buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE; + buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE; + mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", + buf_size1, buf_size2); + break; + default: + mfc_err("Unknown codec set for encoding: %d\n", + ctx->codec_mode); + return -EINVAL; + } + return 0; +} + +static int s5p_mfc_set_enc_params(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + unsigned int reg; + unsigned int shm; + + /* width */ + mfc_write(dev, ctx->img_width, S5P_FIMV_ENC_HSIZE_PX); + /* height */ + mfc_write(dev, ctx->img_height, S5P_FIMV_ENC_VSIZE_PX); + /* pictype : enable, IDR period */ + reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL); + reg |= (1 << 18); + reg &= ~(0xFFFF); + reg |= p->gop_size; + mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL); + mfc_write(dev, 0, S5P_FIMV_ENC_B_RECON_WRITE_ON); + /* multi-slice control */ + /* multi-slice MB number or bit size */ + mfc_write(dev, p->slice_mode, S5P_FIMV_ENC_MSLICE_CTRL); + if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB) { + mfc_write(dev, p->slice_mb, S5P_FIMV_ENC_MSLICE_MB); + } else if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES) { + mfc_write(dev, p->slice_bit, S5P_FIMV_ENC_MSLICE_BIT); + } else { + mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_MB); + mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_BIT); + } + /* cyclic intra refresh */ + mfc_write(dev, p->intra_refresh_mb, S5P_FIMV_ENC_CIR_CTRL); + /* memory structure cur. frame */ + if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) + mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR); + else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) + mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR); + /* padding control & value */ + reg = mfc_read(dev, S5P_FIMV_ENC_PADDING_CTRL); + if (p->pad) { + /** enable */ + reg |= (1 << 31); + /** cr value */ + reg &= ~(0xFF << 16); + reg |= (p->pad_cr << 16); + /** cb value */ + reg &= ~(0xFF << 8); + reg |= (p->pad_cb << 8); + /** y value */ + reg &= ~(0xFF); + reg |= (p->pad_luma); + } else { + /** disable & all value clear */ + reg = 0; + } + mfc_write(dev, reg, S5P_FIMV_ENC_PADDING_CTRL); + /* rate control config. */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG); + /** frame-level rate control */ + reg &= ~(0x1 << 9); + reg |= (p->rc_frame << 9); + mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG); + /* bit rate */ + if (p->rc_frame) + mfc_write(dev, p->rc_bitrate, + S5P_FIMV_ENC_RC_BIT_RATE); + else + mfc_write(dev, 0, S5P_FIMV_ENC_RC_BIT_RATE); + /* reaction coefficient */ + if (p->rc_frame) + mfc_write(dev, p->rc_reaction_coeff, S5P_FIMV_ENC_RC_RPARA); + shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL); + /* seq header ctrl */ + shm &= ~(0x1 << 3); + shm |= (p->seq_hdr_mode << 3); + /* frame skip mode */ + shm &= ~(0x3 << 1); + shm |= (p->frame_skip_mode << 1); + s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL); + /* fixed target bit */ + s5p_mfc_write_shm(ctx, p->fixed_target_bit, RC_CONTROL_CONFIG); + return 0; +} + +static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + struct s5p_mfc_h264_enc_params *p_264 = &p->codec.h264; + unsigned int reg; + unsigned int shm; + + s5p_mfc_set_enc_params(ctx); + /* pictype : number of B */ + reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL); + /* num_b_frame - 0 ~ 2 */ + reg &= ~(0x3 << 16); + reg |= (p->num_b_frame << 16); + mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL); + /* profile & level */ + reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE); + /* level */ + reg &= ~(0xFF << 8); + reg |= (p_264->level << 8); + /* profile - 0 ~ 2 */ + reg &= ~(0x3F); + reg |= p_264->profile; + mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE); + /* interlace */ + mfc_write(dev, p->interlace, S5P_FIMV_ENC_PIC_STRUCT); + /* height */ + if (p->interlace) + mfc_write(dev, ctx->img_height >> 1, S5P_FIMV_ENC_VSIZE_PX); + /* loopfilter ctrl */ + mfc_write(dev, p_264->loop_filter_mode, S5P_FIMV_ENC_LF_CTRL); + /* loopfilter alpha offset */ + if (p_264->loop_filter_alpha < 0) { + reg = 0x10; + reg |= (0xFF - p_264->loop_filter_alpha) + 1; + } else { + reg = 0x00; + reg |= (p_264->loop_filter_alpha & 0xF); + } + mfc_write(dev, reg, S5P_FIMV_ENC_ALPHA_OFF); + /* loopfilter beta offset */ + if (p_264->loop_filter_beta < 0) { + reg = 0x10; + reg |= (0xFF - p_264->loop_filter_beta) + 1; + } else { + reg = 0x00; + reg |= (p_264->loop_filter_beta & 0xF); + } + mfc_write(dev, reg, S5P_FIMV_ENC_BETA_OFF); + /* entropy coding mode */ + if (p_264->entropy_mode == V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC) + mfc_write(dev, 1, S5P_FIMV_ENC_H264_ENTROPY_MODE); + else + mfc_write(dev, 0, S5P_FIMV_ENC_H264_ENTROPY_MODE); + /* number of ref. picture */ + reg = mfc_read(dev, S5P_FIMV_ENC_H264_NUM_OF_REF); + /* num of ref. pictures of P */ + reg &= ~(0x3 << 5); + reg |= (p_264->num_ref_pic_4p << 5); + /* max number of ref. pictures */ + reg &= ~(0x1F); + reg |= p_264->max_ref_pic; + mfc_write(dev, reg, S5P_FIMV_ENC_H264_NUM_OF_REF); + /* 8x8 transform enable */ + mfc_write(dev, p_264->_8x8_transform, S5P_FIMV_ENC_H264_TRANS_FLAG); + /* rate control config. */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG); + /* macroblock level rate control */ + reg &= ~(0x1 << 8); + reg |= (p_264->rc_mb << 8); + /* frame QP */ + reg &= ~(0x3F); + reg |= p_264->rc_frame_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG); + /* frame rate */ + if (p->rc_frame && p->rc_framerate_denom) + mfc_write(dev, p->rc_framerate_num * 1000 + / p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE); + else + mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE); + /* max & min value of QP */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND); + /* max QP */ + reg &= ~(0x3F << 8); + reg |= (p_264->rc_max_qp << 8); + /* min QP */ + reg &= ~(0x3F); + reg |= p_264->rc_min_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND); + /* macroblock adaptive scaling features */ + if (p_264->rc_mb) { + reg = mfc_read(dev, S5P_FIMV_ENC_RC_MB_CTRL); + /* dark region */ + reg &= ~(0x1 << 3); + reg |= (p_264->rc_mb_dark << 3); + /* smooth region */ + reg &= ~(0x1 << 2); + reg |= (p_264->rc_mb_smooth << 2); + /* static region */ + reg &= ~(0x1 << 1); + reg |= (p_264->rc_mb_static << 1); + /* high activity region */ + reg &= ~(0x1); + reg |= p_264->rc_mb_activity; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_MB_CTRL); + } + if (!p->rc_frame && + !p_264->rc_mb) { + shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP); + shm &= ~(0xFFF); + shm |= ((p_264->rc_b_frame_qp & 0x3F) << 6); + shm |= (p_264->rc_p_frame_qp & 0x3F); + s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP); + } + /* extended encoder ctrl */ + shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL); + /* AR VUI control */ + shm &= ~(0x1 << 15); + shm |= (p_264->vui_sar << 1); + s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL); + if (p_264->vui_sar) { + /* aspect ration IDC */ + shm = s5p_mfc_read_shm(ctx, SAMPLE_ASPECT_RATIO_IDC); + shm &= ~(0xFF); + shm |= p_264->vui_sar_idc; + s5p_mfc_write_shm(ctx, shm, SAMPLE_ASPECT_RATIO_IDC); + if (p_264->vui_sar_idc == 0xFF) { + /* sample AR info */ + shm = s5p_mfc_read_shm(ctx, EXTENDED_SAR); + shm &= ~(0xFFFFFFFF); + shm |= p_264->vui_ext_sar_width << 16; + shm |= p_264->vui_ext_sar_height; + s5p_mfc_write_shm(ctx, shm, EXTENDED_SAR); + } + } + /* intra picture period for H.264 */ + shm = s5p_mfc_read_shm(ctx, H264_I_PERIOD); + /* control */ + shm &= ~(0x1 << 16); + shm |= (p_264->open_gop << 16); + /* value */ + if (p_264->open_gop) { + shm &= ~(0xFFFF); + shm |= p_264->open_gop_size; + } + s5p_mfc_write_shm(ctx, shm, H264_I_PERIOD); + /* extended encoder ctrl */ + shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL); + /* vbv buffer size */ + if (p->frame_skip_mode == + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) { + shm &= ~(0xFFFF << 16); + shm |= (p_264->cpb_size << 16); + } + s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL); + return 0; +} + +static int s5p_mfc_set_enc_params_mpeg4(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + struct s5p_mfc_mpeg4_enc_params *p_mpeg4 = &p->codec.mpeg4; + unsigned int reg; + unsigned int shm; + unsigned int framerate; + + s5p_mfc_set_enc_params(ctx); + /* pictype : number of B */ + reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL); + /* num_b_frame - 0 ~ 2 */ + reg &= ~(0x3 << 16); + reg |= (p->num_b_frame << 16); + mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL); + /* profile & level */ + reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE); + /* level */ + reg &= ~(0xFF << 8); + reg |= (p_mpeg4->level << 8); + /* profile - 0 ~ 2 */ + reg &= ~(0x3F); + reg |= p_mpeg4->profile; + mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE); + /* quarter_pixel */ + mfc_write(dev, p_mpeg4->quarter_pixel, S5P_FIMV_ENC_MPEG4_QUART_PXL); + /* qp */ + if (!p->rc_frame) { + shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP); + shm &= ~(0xFFF); + shm |= ((p_mpeg4->rc_b_frame_qp & 0x3F) << 6); + shm |= (p_mpeg4->rc_p_frame_qp & 0x3F); + s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP); + } + /* frame rate */ + if (p->rc_frame) { + if (p->rc_framerate_denom > 0) { + framerate = p->rc_framerate_num * 1000 / + p->rc_framerate_denom; + mfc_write(dev, framerate, + S5P_FIMV_ENC_RC_FRAME_RATE); + shm = s5p_mfc_read_shm(ctx, RC_VOP_TIMING); + shm &= ~(0xFFFFFFFF); + shm |= (1 << 31); + shm |= ((p->rc_framerate_num & 0x7FFF) << 16); + shm |= (p->rc_framerate_denom & 0xFFFF); + s5p_mfc_write_shm(ctx, shm, RC_VOP_TIMING); + } + } else { + mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE); + } + /* rate control config. */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG); + /* frame QP */ + reg &= ~(0x3F); + reg |= p_mpeg4->rc_frame_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG); + /* max & min value of QP */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND); + /* max QP */ + reg &= ~(0x3F << 8); + reg |= (p_mpeg4->rc_max_qp << 8); + /* min QP */ + reg &= ~(0x3F); + reg |= p_mpeg4->rc_min_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND); + /* extended encoder ctrl */ + shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL); + /* vbv buffer size */ + if (p->frame_skip_mode == + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) { + shm &= ~(0xFFFF << 16); + shm |= (p->vbv_size << 16); + } + s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL); + return 0; +} + +static int s5p_mfc_set_enc_params_h263(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_enc_params *p = &ctx->enc_params; + struct s5p_mfc_mpeg4_enc_params *p_h263 = &p->codec.mpeg4; + unsigned int reg; + unsigned int shm; + + s5p_mfc_set_enc_params(ctx); + /* qp */ + if (!p->rc_frame) { + shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP); + shm &= ~(0xFFF); + shm |= (p_h263->rc_p_frame_qp & 0x3F); + s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP); + } + /* frame rate */ + if (p->rc_frame && p->rc_framerate_denom) + mfc_write(dev, p->rc_framerate_num * 1000 + / p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE); + else + mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE); + /* rate control config. */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG); + /* frame QP */ + reg &= ~(0x3F); + reg |= p_h263->rc_frame_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG); + /* max & min value of QP */ + reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND); + /* max QP */ + reg &= ~(0x3F << 8); + reg |= (p_h263->rc_max_qp << 8); + /* min QP */ + reg &= ~(0x3F); + reg |= p_h263->rc_min_qp; + mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND); + /* extended encoder ctrl */ + shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL); + /* vbv buffer size */ + if (p->frame_skip_mode == + V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) { + shm &= ~(0xFFFF << 16); + shm |= (p->vbv_size << 16); + } + s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL); + return 0; +} + +/* Initialize decoding */ +int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + s5p_mfc_set_shared_buffer(ctx); + /* Setup loop filter, for decoding this is only valid for MPEG4 */ + if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_DEC) + mfc_write(dev, ctx->loop_filter_mpeg4, S5P_FIMV_ENC_LF_CTRL); + else + mfc_write(dev, 0, S5P_FIMV_ENC_LF_CTRL); + mfc_write(dev, ((ctx->slice_interface & S5P_FIMV_SLICE_INT_MASK) << + S5P_FIMV_SLICE_INT_SHIFT) | (ctx->display_delay_enable << + S5P_FIMV_DDELAY_ENA_SHIFT) | ((ctx->display_delay & + S5P_FIMV_DDELAY_VAL_MASK) << S5P_FIMV_DDELAY_VAL_SHIFT), + S5P_FIMV_SI_CH0_DPB_CONF_CTRL); + mfc_write(dev, + ((S5P_FIMV_CH_SEQ_HEADER & S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT) + | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + return 0; +} + +static void s5p_mfc_set_flush(struct s5p_mfc_ctx *ctx, int flush) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned int dpb; + + if (flush) + dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) | ( + S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT); + else + dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) & + ~(S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT); + mfc_write(dev, dpb, S5P_FIMV_SI_CH0_DPB_CONF_CTRL); +} + +/* Decode a single frame */ +int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx, + enum s5p_mfc_decode_arg last_frame) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + mfc_write(dev, ctx->dec_dst_flag, S5P_FIMV_SI_CH0_RELEASE_BUF); + s5p_mfc_set_shared_buffer(ctx); + s5p_mfc_set_flush(ctx, ctx->dpb_flush_flag); + /* Issue different commands to instance basing on whether it + * is the last frame or not. */ + switch (last_frame) { + case MFC_DEC_FRAME: + mfc_write(dev, ((S5P_FIMV_CH_FRAME_START & S5P_FIMV_CH_MASK) << + S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + break; + case MFC_DEC_LAST_FRAME: + mfc_write(dev, ((S5P_FIMV_CH_LAST_FRAME & S5P_FIMV_CH_MASK) << + S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + break; + case MFC_DEC_RES_CHANGE: + mfc_write(dev, ((S5P_FIMV_CH_FRAME_START_REALLOC & + S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT) | (ctx->inst_no), + S5P_FIMV_SI_CH0_INST_ID); + break; + } + mfc_debug(2, "Decoding a usual frame\n"); + return 0; +} + +int s5p_mfc_init_encode(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) + s5p_mfc_set_enc_params_h264(ctx); + else if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_ENC) + s5p_mfc_set_enc_params_mpeg4(ctx); + else if (ctx->codec_mode == S5P_FIMV_CODEC_H263_ENC) + s5p_mfc_set_enc_params_h263(ctx); + else { + mfc_err("Unknown codec for encoding (%x)\n", + ctx->codec_mode); + return -EINVAL; + } + s5p_mfc_set_shared_buffer(ctx); + mfc_write(dev, ((S5P_FIMV_CH_SEQ_HEADER << 16) & 0x70000) | + (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + return 0; +} + +/* Encode a single frame */ +int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + /* memory structure cur. frame */ + if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) + mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR); + else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) + mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR); + s5p_mfc_set_shared_buffer(ctx); + mfc_write(dev, (S5P_FIMV_CH_FRAME_START << 16 & 0x70000) | + (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID); + return 0; +} + +static int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev) +{ + unsigned long flags; + int new_ctx; + int cnt; + + spin_lock_irqsave(&dev->condlock, flags); + new_ctx = (dev->curr_ctx + 1) % MFC_NUM_CONTEXTS; + cnt = 0; + while (!test_bit(new_ctx, &dev->ctx_work_bits)) { + new_ctx = (new_ctx + 1) % MFC_NUM_CONTEXTS; + if (++cnt > MFC_NUM_CONTEXTS) { + /* No contexts to run */ + spin_unlock_irqrestore(&dev->condlock, flags); + return -EAGAIN; + } + } + spin_unlock_irqrestore(&dev->condlock, flags); + return new_ctx; +} + +static void s5p_mfc_run_res_change(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + + s5p_mfc_set_dec_stream_buffer(ctx, 0, 0, 0); + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_decode_one_frame(ctx, MFC_DEC_RES_CHANGE); +} + +static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame) +{ + struct s5p_mfc_dev *dev = ctx->dev; + struct s5p_mfc_buf *temp_vb; + unsigned long flags; + unsigned int index; + + spin_lock_irqsave(&dev->irqlock, flags); + /* Frames are being decoded */ + if (list_empty(&ctx->src_queue)) { + mfc_debug(2, "No src buffers\n"); + spin_unlock_irqrestore(&dev->irqlock, flags); + return -EAGAIN; + } + /* Get the next source buffer */ + temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + temp_vb->used = 1; + s5p_mfc_set_dec_stream_buffer(ctx, + vb2_dma_contig_plane_paddr(temp_vb->b, 0), ctx->consumed_stream, + temp_vb->b->v4l2_planes[0].bytesused); + spin_unlock_irqrestore(&dev->irqlock, flags); + index = temp_vb->b->v4l2_buf.index; + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + if (temp_vb->b->v4l2_planes[0].bytesused == 0) { + last_frame = MFC_DEC_LAST_FRAME; + mfc_debug(2, "Setting ctx->state to FINISHING\n"); + ctx->state = MFCINST_FINISHING; + } + s5p_mfc_decode_one_frame(ctx, last_frame); + return 0; +} + +static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *dst_mb; + struct s5p_mfc_buf *src_mb; + unsigned long src_y_addr, src_c_addr, dst_addr; + unsigned int dst_size; + + spin_lock_irqsave(&dev->irqlock, flags); + if (list_empty(&ctx->src_queue)) { + mfc_debug(2, "no src buffers\n"); + spin_unlock_irqrestore(&dev->irqlock, flags); + return -EAGAIN; + } + if (list_empty(&ctx->dst_queue)) { + mfc_debug(2, "no dst buffers\n"); + spin_unlock_irqrestore(&dev->irqlock, flags); + return -EAGAIN; + } + src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + src_mb->used = 1; + src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0); + src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1); + s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr); + dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list); + dst_mb->used = 1; + dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0); + dst_size = vb2_plane_size(dst_mb->b, 0); + s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size); + spin_unlock_irqrestore(&dev->irqlock, flags); + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_encode_one_frame(ctx); + return 0; +} + +static void s5p_mfc_run_init_dec(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *temp_vb; + + /* Initializing decoding - parsing header */ + spin_lock_irqsave(&dev->irqlock, flags); + mfc_debug(2, "Preparing to init decoding\n"); + temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + s5p_mfc_set_dec_desc_buffer(ctx); + mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused); + s5p_mfc_set_dec_stream_buffer(ctx, + vb2_dma_contig_plane_paddr(temp_vb->b, 0), + 0, temp_vb->b->v4l2_planes[0].bytesused); + spin_unlock_irqrestore(&dev->irqlock, flags); + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_init_decode(ctx); +} + +static void s5p_mfc_run_init_enc(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *dst_mb; + unsigned long dst_addr; + unsigned int dst_size; + + s5p_mfc_set_enc_ref_buffer(ctx); + spin_lock_irqsave(&dev->irqlock, flags); + dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list); + dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0); + dst_size = vb2_plane_size(dst_mb->b, 0); + s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size); + spin_unlock_irqrestore(&dev->irqlock, flags); + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + s5p_mfc_init_encode(ctx); +} + +static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + unsigned long flags; + struct s5p_mfc_buf *temp_vb; + int ret; + + /* + * Header was parsed now starting processing + * First set the output frame buffers + */ + if (ctx->capture_state != QUEUE_BUFS_MMAPED) { + mfc_err("It seems that not all destionation buffers were " + "mmaped\nMFC requires that all destination are mmaped " + "before starting processing\n"); + return -EAGAIN; + } + spin_lock_irqsave(&dev->irqlock, flags); + if (list_empty(&ctx->src_queue)) { + mfc_err("Header has been deallocated in the middle of" + " initialization\n"); + spin_unlock_irqrestore(&dev->irqlock, flags); + return -EIO; + } + temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list); + mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused); + s5p_mfc_set_dec_stream_buffer(ctx, + vb2_dma_contig_plane_paddr(temp_vb->b, 0), + 0, temp_vb->b->v4l2_planes[0].bytesused); + spin_unlock_irqrestore(&dev->irqlock, flags); + dev->curr_ctx = ctx->num; + s5p_mfc_clean_ctx_int_flags(ctx); + ret = s5p_mfc_set_dec_frame_buffer(ctx); + if (ret) { + mfc_err("Failed to alloc frame mem\n"); + ctx->state = MFCINST_ERROR; + } + return ret; +} + +/* Try running an operation on hardware */ +void s5p_mfc_try_run(struct s5p_mfc_dev *dev) +{ + struct s5p_mfc_ctx *ctx; + int new_ctx; + unsigned int ret = 0; + + if (test_bit(0, &dev->enter_suspend)) { + mfc_debug(1, "Entering suspend so do not schedule any jobs\n"); + return; + } + /* Check whether hardware is not running */ + if (test_and_set_bit(0, &dev->hw_lock) != 0) { + /* This is perfectly ok, the scheduled ctx should wait */ + mfc_debug(1, "Couldn't lock HW\n"); + return; + } + /* Choose the context to run */ + new_ctx = s5p_mfc_get_new_ctx(dev); + if (new_ctx < 0) { + /* No contexts to run */ + if (test_and_clear_bit(0, &dev->hw_lock) == 0) { + mfc_err("Failed to unlock hardware\n"); + return; + } + mfc_debug(1, "No ctx is scheduled to be run\n"); + return; + } + ctx = dev->ctx[new_ctx]; + /* Got context to run in ctx */ + /* + * Last frame has already been sent to MFC. + * Now obtaining frames from MFC buffer + */ + s5p_mfc_clock_on(); + if (ctx->type == MFCINST_DECODER) { + s5p_mfc_set_dec_desc_buffer(ctx); + switch (ctx->state) { + case MFCINST_FINISHING: + s5p_mfc_run_dec_frame(ctx, MFC_DEC_LAST_FRAME); + break; + case MFCINST_RUNNING: + ret = s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME); + break; + case MFCINST_INIT: + s5p_mfc_clean_ctx_int_flags(ctx); + ret = s5p_mfc_open_inst_cmd(ctx); + break; + case MFCINST_RETURN_INST: + s5p_mfc_clean_ctx_int_flags(ctx); + ret = s5p_mfc_close_inst_cmd(ctx); + break; + case MFCINST_GOT_INST: + s5p_mfc_run_init_dec(ctx); + break; + case MFCINST_HEAD_PARSED: + ret = s5p_mfc_run_init_dec_buffers(ctx); + mfc_debug(1, "head parsed\n"); + break; + case MFCINST_RES_CHANGE_INIT: + s5p_mfc_run_res_change(ctx); + break; + case MFCINST_RES_CHANGE_FLUSH: + s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME); + break; + case MFCINST_RES_CHANGE_END: + mfc_debug(2, "Finished remaining frames after resolution change\n"); + ctx->capture_state = QUEUE_FREE; + mfc_debug(2, "Will re-init the codec\n"); + s5p_mfc_run_init_dec(ctx); + break; + default: + ret = -EAGAIN; + } + } else if (ctx->type == MFCINST_ENCODER) { + switch (ctx->state) { + case MFCINST_FINISHING: + case MFCINST_RUNNING: + ret = s5p_mfc_run_enc_frame(ctx); + break; + case MFCINST_INIT: + s5p_mfc_clean_ctx_int_flags(ctx); + ret = s5p_mfc_open_inst_cmd(ctx); + break; + case MFCINST_RETURN_INST: + s5p_mfc_clean_ctx_int_flags(ctx); + ret = s5p_mfc_close_inst_cmd(ctx); + break; + case MFCINST_GOT_INST: + s5p_mfc_run_init_enc(ctx); + break; + default: + ret = -EAGAIN; + } + } else { + mfc_err("Invalid context type: %d\n", ctx->type); + ret = -EAGAIN; + } + + if (ret) { + /* Free hardware lock */ + if (test_and_clear_bit(0, &dev->hw_lock) == 0) + mfc_err("Failed to unlock hardware\n"); + + /* This is in deed imporant, as no operation has been + * scheduled, reduce the clock count as no one will + * ever do this, because no interrupt related to this try_run + * will ever come from hardware. */ + s5p_mfc_clock_off(); + } +} + + +void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq) +{ + struct s5p_mfc_buf *b; + int i; + + while (!list_empty(lh)) { + b = list_entry(lh->next, struct s5p_mfc_buf, list); + for (i = 0; i < b->b->num_planes; i++) + vb2_set_plane_payload(b->b, i, 0); + vb2_buffer_done(b->b, VB2_BUF_STATE_ERROR); + list_del(&b->list); + } +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h new file mode 100644 index 0000000..db83836 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h @@ -0,0 +1,91 @@ +/* + * drivers/media/video/samsung/mfc5/s5p_mfc_opr.h + * + * Header file for Samsung MFC (Multi Function Codec - FIMV) driver + * Contains declarations of hw related functions. + * + * Kamil Debski, Copyright (C) 2011 Samsung Electronics + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef S5P_MFC_OPR_H_ +#define S5P_MFC_OPR_H_ + +#include "s5p_mfc_common.h" + +int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx); +int s5p_mfc_init_encode(struct s5p_mfc_ctx *mfc_ctx); + +/* Decoding functions */ +int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx); +int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr, + unsigned int start_num_byte, + unsigned int buf_size); + +/* Encoding functions */ +void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx, + unsigned long y_addr, unsigned long c_addr); +int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx, + unsigned long addr, unsigned int size); +void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx, + unsigned long *y_addr, unsigned long *c_addr); +int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *mfc_ctx); + +int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx, + enum s5p_mfc_decode_arg last_frame); +int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *mfc_ctx); + +/* Memory allocation */ +int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx); +void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx); +void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx); + +int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx); +void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx); + +int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx); +void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx); + +void s5p_mfc_try_run(struct s5p_mfc_dev *dev); +void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq); + +#define s5p_mfc_get_dspl_y_adr() (readl(dev->regs_base + \ + S5P_FIMV_SI_DISPLAY_Y_ADR) << \ + MFC_OFFSET_SHIFT) +#define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \ + S5P_FIMV_SI_DISPLAY_Y_ADR) << \ + MFC_OFFSET_SHIFT) +#define s5p_mfc_get_dspl_status() readl(dev->regs_base + \ + S5P_FIMV_SI_DISPLAY_STATUS) +#define s5p_mfc_get_frame_type() (readl(dev->regs_base + \ + S5P_FIMV_DECODE_FRAME_TYPE) \ + & S5P_FIMV_DECODE_FRAME_MASK) +#define s5p_mfc_get_consumed_stream() readl(dev->regs_base + \ + S5P_FIMV_SI_CONSUMED_BYTES) +#define s5p_mfc_get_int_reason() (readl(dev->regs_base + \ + S5P_FIMV_RISC2HOST_CMD) & \ + S5P_FIMV_RISC2HOST_CMD_MASK) +#define s5p_mfc_get_int_err() readl(dev->regs_base + \ + S5P_FIMV_RISC2HOST_ARG2) +#define s5p_mfc_err_dec(x) (((x) & S5P_FIMV_ERR_DEC_MASK) >> \ + S5P_FIMV_ERR_DEC_SHIFT) +#define s5p_mfc_err_dspl(x) (((x) & S5P_FIMV_ERR_DSPL_MASK) >> \ + S5P_FIMV_ERR_DSPL_SHIFT) +#define s5p_mfc_get_img_width() readl(dev->regs_base + \ + S5P_FIMV_SI_HRESOL) +#define s5p_mfc_get_img_height() readl(dev->regs_base + \ + S5P_FIMV_SI_VRESOL) +#define s5p_mfc_get_dpb_count() readl(dev->regs_base + \ + S5P_FIMV_SI_BUF_NUMBER) +#define s5p_mfc_get_inst_no() readl(dev->regs_base + \ + S5P_FIMV_RISC2HOST_ARG1) +#define s5p_mfc_get_enc_strm_size() readl(dev->regs_base + \ + S5P_FIMV_ENC_SI_STRM_SIZE) +#define s5p_mfc_get_enc_slice_type() readl(dev->regs_base + \ + S5P_FIMV_ENC_SI_SLICE_TYPE) + +#endif /* S5P_MFC_OPR_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c new file mode 100644 index 0000000..f6a3035 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c @@ -0,0 +1,117 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#ifdef CONFIG_PM_RUNTIME +#include <linux/pm_runtime.h> +#endif +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" +#include "s5p_mfc_pm.h" + +#define MFC_CLKNAME "sclk_mfc" +#define MFC_GATE_CLK_NAME "mfc" + +#define CLK_DEBUG + +static struct s5p_mfc_pm *pm; +static struct s5p_mfc_dev *p_dev; + +#ifdef CLK_DEBUG +atomic_t clk_ref; +#endif + +int s5p_mfc_init_pm(struct s5p_mfc_dev *dev) +{ + int ret = 0; + + pm = &dev->pm; + p_dev = dev; + pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME); + if (IS_ERR(pm->clock_gate)) { + mfc_err("Failed to get clock-gating control\n"); + ret = -ENOENT; + goto err_g_ip_clk; + } + pm->clock = clk_get(&dev->plat_dev->dev, MFC_CLKNAME); + if (IS_ERR(pm->clock)) { + mfc_err("Failed to get MFC clock\n"); + ret = -ENOENT; + goto err_g_ip_clk_2; + } + atomic_set(&pm->power, 0); +#ifdef CONFIG_PM_RUNTIME + pm->device = &dev->plat_dev->dev; + pm_runtime_enable(pm->device); +#endif +#ifdef CLK_DEBUG + atomic_set(&clk_ref, 0); +#endif + return 0; +err_g_ip_clk_2: + clk_put(pm->clock_gate); +err_g_ip_clk: + return ret; +} + +void s5p_mfc_final_pm(struct s5p_mfc_dev *dev) +{ + clk_put(pm->clock_gate); + clk_put(pm->clock); +#ifdef CONFIG_PM_RUNTIME + pm_runtime_disable(pm->device); +#endif +} + +int s5p_mfc_clock_on(void) +{ + int ret; +#ifdef CLK_DEBUG + atomic_inc(&clk_ref); + mfc_debug(3, "+ %d", atomic_read(&clk_ref)); +#endif + ret = clk_enable(pm->clock_gate); + return ret; +} + +void s5p_mfc_clock_off(void) +{ +#ifdef CLK_DEBUG + atomic_dec(&clk_ref); + mfc_debug(3, "- %d", atomic_read(&clk_ref)); +#endif + clk_disable(pm->clock_gate); +} + +int s5p_mfc_power_on(void) +{ +#ifdef CONFIG_PM_RUNTIME + return pm_runtime_get_sync(pm->device); +#else + atomic_set(&pm->power, 1); + return 0; +#endif +} + +int s5p_mfc_power_off(void) +{ +#ifdef CONFIG_PM_RUNTIME + return pm_runtime_put_sync(pm->device); +#else + atomic_set(&pm->power, 0); + return 0; +#endif +} + + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.h b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h new file mode 100644 index 0000000..5107914 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h @@ -0,0 +1,24 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.h + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_PM_H_ +#define S5P_MFC_PM_H_ + +int s5p_mfc_init_pm(struct s5p_mfc_dev *dev); +void s5p_mfc_final_pm(struct s5p_mfc_dev *dev); + +int s5p_mfc_clock_on(void); +void s5p_mfc_clock_off(void); +int s5p_mfc_power_on(void); +int s5p_mfc_power_off(void); + +#endif /* S5P_MFC_PM_H_ */ diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.c b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c new file mode 100644 index 0000000..91fdbac8 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c @@ -0,0 +1,47 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifdef CONFIG_ARCH_EXYNOS4 +#include <linux/dma-mapping.h> +#endif +#include <linux/io.h> +#include "s5p_mfc_common.h" +#include "s5p_mfc_debug.h" + +int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx) +{ + struct s5p_mfc_dev *dev = ctx->dev; + void *shm_alloc_ctx = dev->alloc_ctx[MFC_BANK1_ALLOC_CTX]; + + ctx->shm_alloc = vb2_dma_contig_memops.alloc(shm_alloc_ctx, + SHARED_BUF_SIZE); + if (IS_ERR(ctx->shm_alloc)) { + mfc_err("failed to allocate shared memory\n"); + return PTR_ERR(ctx->shm_alloc); + } + /* shm_ofs only keeps the offset from base (port a) */ + ctx->shm_ofs = s5p_mfc_mem_cookie(shm_alloc_ctx, ctx->shm_alloc) + - dev->bank1; + BUG_ON(ctx->shm_ofs & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); + ctx->shm = vb2_dma_contig_memops.vaddr(ctx->shm_alloc); + if (!ctx->shm) { + vb2_dma_contig_memops.put(ctx->shm_alloc); + ctx->shm_ofs = 0; + ctx->shm_alloc = NULL; + mfc_err("failed to virt addr of shared memory\n"); + return -ENOMEM; + } + memset((void *)ctx->shm, 0, SHARED_BUF_SIZE); + wmb(); + return 0; +} + diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h new file mode 100644 index 0000000..764eac6 --- /dev/null +++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h @@ -0,0 +1,91 @@ +/* + * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef S5P_MFC_SHM_H_ +#define S5P_MFC_SHM_H_ + +enum MFC_SHM_OFS +{ + EXTENEDED_DECODE_STATUS = 0x00, /* D */ + SET_FRAME_TAG = 0x04, /* D */ + GET_FRAME_TAG_TOP = 0x08, /* D */ + GET_FRAME_TAG_BOT = 0x0C, /* D */ + PIC_TIME_TOP = 0x10, /* D */ + PIC_TIME_BOT = 0x14, /* D */ + START_BYTE_NUM = 0x18, /* D */ + + CROP_INFO_H = 0x20, /* D */ + CROP_INFO_V = 0x24, /* D */ + EXT_ENC_CONTROL = 0x28, /* E */ + ENC_PARAM_CHANGE = 0x2C, /* E */ + RC_VOP_TIMING = 0x30, /* E, MPEG4 */ + HEC_PERIOD = 0x34, /* E, MPEG4 */ + METADATA_ENABLE = 0x38, /* C */ + METADATA_STATUS = 0x3C, /* C */ + METADATA_DISPLAY_INDEX = 0x40, /* C */ + EXT_METADATA_START_ADDR = 0x44, /* C */ + PUT_EXTRADATA = 0x48, /* C */ + EXTRADATA_ADDR = 0x4C, /* C */ + + ALLOC_LUMA_DPB_SIZE = 0x64, /* D */ + ALLOC_CHROMA_DPB_SIZE = 0x68, /* D */ + ALLOC_MV_SIZE = 0x6C, /* D */ + P_B_FRAME_QP = 0x70, /* E */ + SAMPLE_ASPECT_RATIO_IDC = 0x74, /* E, H.264, depend on + ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */ + EXTENDED_SAR = 0x78, /* E, H.264, depned on + ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */ + DISP_PIC_PROFILE = 0x7C, /* D */ + FLUSH_CMD_TYPE = 0x80, /* C */ + FLUSH_CMD_INBUF1 = 0x84, /* C */ + FLUSH_CMD_INBUF2 = 0x88, /* C */ + FLUSH_CMD_OUTBUF = 0x8C, /* E */ + NEW_RC_BIT_RATE = 0x90, /* E, format as RC_BIT_RATE(0xC5A8) + depend on RC_BIT_RATE_CHANGE in ENC_PARAM_CHANGE */ + NEW_RC_FRAME_RATE = 0x94, /* E, format as RC_FRAME_RATE(0xD0D0) + depend on RC_FRAME_RATE_CHANGE in ENC_PARAM_CHANGE */ + NEW_I_PERIOD = 0x98, /* E, format as I_FRM_CTRL(0xC504) + depend on I_PERIOD_CHANGE in ENC_PARAM_CHANGE */ + H264_I_PERIOD = 0x9C, /* E, H.264, open GOP */ + RC_CONTROL_CONFIG = 0xA0, /* E */ + BATCH_INPUT_ADDR = 0xA4, /* E */ + BATCH_OUTPUT_ADDR = 0xA8, /* E */ + BATCH_OUTPUT_SIZE = 0xAC, /* E */ + MIN_LUMA_DPB_SIZE = 0xB0, /* D */ + DEVICE_FORMAT_ID = 0xB4, /* C */ + H264_POC_TYPE = 0xB8, /* D */ + MIN_CHROMA_DPB_SIZE = 0xBC, /* D */ + DISP_PIC_FRAME_TYPE = 0xC0, /* D */ + FREE_LUMA_DPB = 0xC4, /* D, VC1 MPEG4 */ + ASPECT_RATIO_INFO = 0xC8, /* D, MPEG4 */ + EXTENDED_PAR = 0xCC, /* D, MPEG4 */ + DBG_HISTORY_INPUT0 = 0xD0, /* C */ + DBG_HISTORY_INPUT1 = 0xD4, /* C */ + DBG_HISTORY_OUTPUT = 0xD8, /* C */ + HIERARCHICAL_P_QP = 0xE0, /* E, H.264 */ +}; + +int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx); + +#define s5p_mfc_write_shm(ctx, x, ofs) \ + do { \ + writel(x, (ctx->shm + ofs)); \ + wmb(); \ + } while (0) + +static inline u32 s5p_mfc_read_shm(struct s5p_mfc_ctx *ctx, unsigned int ofs) +{ + rmb(); + return readl(ctx->shm + ofs); +} + +#endif /* S5P_MFC_SHM_H_ */ diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig new file mode 100644 index 0000000..9c37dee --- /dev/null +++ b/drivers/media/video/s5p-tv/Kconfig @@ -0,0 +1,76 @@ +# drivers/media/video/s5p-tv/Kconfig +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# Tomasz Stanislawski <t.stanislaws@samsung.com> +# +# Licensed under GPL + +config VIDEO_SAMSUNG_S5P_TV + bool "Samsung TV driver for S5P platform (experimental)" + depends on PLAT_S5P + depends on EXPERIMENTAL + default n + ---help--- + Say Y here to enable selecting the TV output devices for + Samsung S5P platform. + +if VIDEO_SAMSUNG_S5P_TV + +config VIDEO_SAMSUNG_S5P_HDMI + tristate "Samsung HDMI Driver" + depends on VIDEO_V4L2 + depends on VIDEO_SAMSUNG_S5P_TV + select VIDEO_SAMSUNG_S5P_HDMIPHY + help + Say Y here if you want support for the HDMI output + interface in S5P Samsung SoC. The driver can be compiled + as module. It is an auxiliary driver, that exposes a V4L2 + subdev for use by other drivers. This driver requires + hdmiphy driver to work correctly. + +config VIDEO_SAMSUNG_S5P_HDMI_DEBUG + bool "Enable debug for HDMI Driver" + depends on VIDEO_SAMSUNG_S5P_HDMI + default n + help + Enables debugging for HDMI driver. + +config VIDEO_SAMSUNG_S5P_HDMIPHY + tristate "Samsung HDMIPHY Driver" + depends on VIDEO_DEV && VIDEO_V4L2 && I2C + depends on VIDEO_SAMSUNG_S5P_TV + help + Say Y here if you want support for the physical HDMI + interface in S5P Samsung SoC. The driver can be compiled + as module. It is an I2C driver, that exposes a V4L2 + subdev for use by other drivers. + +config VIDEO_SAMSUNG_S5P_SDO + tristate "Samsung Analog TV Driver" + depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_SAMSUNG_S5P_TV + help + Say Y here if you want support for the analog TV output + interface in S5P Samsung SoC. The driver can be compiled + as module. It is an auxiliary driver, that exposes a V4L2 + subdev for use by other drivers. This driver requires + hdmiphy driver to work correctly. + +config VIDEO_SAMSUNG_S5P_MIXER + tristate "Samsung Mixer and Video Processor Driver" + depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_SAMSUNG_S5P_TV + select VIDEOBUF2_DMA_CONTIG + help + Say Y here if you want support for the Mixer in Samsung S5P SoCs. + This device produce image data to one of output interfaces. + +config VIDEO_SAMSUNG_S5P_MIXER_DEBUG + bool "Enable debug for Mixer Driver" + depends on VIDEO_SAMSUNG_S5P_MIXER + default n + help + Enables debugging for Mixer driver. + +endif # VIDEO_SAMSUNG_S5P_TV diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile new file mode 100644 index 0000000..37e4c17 --- /dev/null +++ b/drivers/media/video/s5p-tv/Makefile @@ -0,0 +1,17 @@ +# drivers/media/video/samsung/tvout/Makefile +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# Tomasz Stanislawski <t.stanislaws@samsung.com> +# +# Licensed under GPL + +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o +s5p-hdmiphy-y += hdmiphy_drv.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o +s5p-hdmi-y += hdmi_drv.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o +s5p-sdo-y += sdo_drv.o +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MIXER) += s5p-mixer.o +s5p-mixer-y += mixer_drv.o mixer_video.o mixer_reg.o mixer_grp_layer.o mixer_vp_layer.o + diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c new file mode 100644 index 0000000..06d6663 --- /dev/null +++ b/drivers/media/video/s5p-tv/hdmi_drv.c @@ -0,0 +1,1042 @@ +/* + * Samsung HDMI interface driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#ifdef CONFIG_VIDEO_SAMSUNG_S5P_HDMI_DEBUG +#define DEBUG +#endif + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <media/v4l2-subdev.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/bug.h> +#include <linux/pm_runtime.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> + +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> + +#include "regs-hdmi.h" + +MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung HDMI"); +MODULE_LICENSE("GPL"); + +/* default preset configured on probe */ +#define HDMI_DEFAULT_PRESET V4L2_DV_1080P60 + +struct hdmi_resources { + struct clk *hdmi; + struct clk *sclk_hdmi; + struct clk *sclk_pixel; + struct clk *sclk_hdmiphy; + struct clk *hdmiphy; + struct regulator_bulk_data *regul_bulk; + int regul_count; +}; + +struct hdmi_device { + /** base address of HDMI registers */ + void __iomem *regs; + /** HDMI interrupt */ + unsigned int irq; + /** pointer to device parent */ + struct device *dev; + /** subdev generated by HDMI device */ + struct v4l2_subdev sd; + /** V4L2 device structure */ + struct v4l2_device v4l2_dev; + /** subdev of HDMIPHY interface */ + struct v4l2_subdev *phy_sd; + /** configuration of current graphic mode */ + const struct hdmi_preset_conf *cur_conf; + /** current preset */ + u32 cur_preset; + /** other resources */ + struct hdmi_resources res; +}; + +struct hdmi_driver_data { + int hdmiphy_bus; +}; + +struct hdmi_tg_regs { + u8 cmd; + u8 h_fsz_l; + u8 h_fsz_h; + u8 hact_st_l; + u8 hact_st_h; + u8 hact_sz_l; + u8 hact_sz_h; + u8 v_fsz_l; + u8 v_fsz_h; + u8 vsync_l; + u8 vsync_h; + u8 vsync2_l; + u8 vsync2_h; + u8 vact_st_l; + u8 vact_st_h; + u8 vact_sz_l; + u8 vact_sz_h; + u8 field_chg_l; + u8 field_chg_h; + u8 vact_st2_l; + u8 vact_st2_h; + u8 vsync_top_hdmi_l; + u8 vsync_top_hdmi_h; + u8 vsync_bot_hdmi_l; + u8 vsync_bot_hdmi_h; + u8 field_top_hdmi_l; + u8 field_top_hdmi_h; + u8 field_bot_hdmi_l; + u8 field_bot_hdmi_h; +}; + +struct hdmi_core_regs { + u8 h_blank[2]; + u8 v_blank[3]; + u8 h_v_line[3]; + u8 vsync_pol[1]; + u8 int_pro_mode[1]; + u8 v_blank_f[3]; + u8 h_sync_gen[3]; + u8 v_sync_gen1[3]; + u8 v_sync_gen2[3]; + u8 v_sync_gen3[3]; +}; + +struct hdmi_preset_conf { + struct hdmi_core_regs core; + struct hdmi_tg_regs tg; + struct v4l2_mbus_framefmt mbus_fmt; +}; + +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy", 0x38), +}; + +static struct hdmi_driver_data hdmi_driver_data[] = { + { .hdmiphy_bus = 3 }, + { .hdmiphy_bus = 8 }, +}; + +static struct platform_device_id hdmi_driver_types[] = { + { + .name = "s5pv210-hdmi", + .driver_data = (unsigned long)&hdmi_driver_data[0], + }, { + .name = "exynos4-hdmi", + .driver_data = (unsigned long)&hdmi_driver_data[1], + }, { + /* end node */ + } +}; + +static const struct v4l2_subdev_ops hdmi_sd_ops; + +static struct hdmi_device *sd_to_hdmi_dev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct hdmi_device, sd); +} + +static inline +void hdmi_write(struct hdmi_device *hdev, u32 reg_id, u32 value) +{ + writel(value, hdev->regs + reg_id); +} + +static inline +void hdmi_write_mask(struct hdmi_device *hdev, u32 reg_id, u32 value, u32 mask) +{ + u32 old = readl(hdev->regs + reg_id); + value = (value & mask) | (old & ~mask); + writel(value, hdev->regs + reg_id); +} + +static inline +void hdmi_writeb(struct hdmi_device *hdev, u32 reg_id, u8 value) +{ + writeb(value, hdev->regs + reg_id); +} + +static inline u32 hdmi_read(struct hdmi_device *hdev, u32 reg_id) +{ + return readl(hdev->regs + reg_id); +} + +static irqreturn_t hdmi_irq_handler(int irq, void *dev_data) +{ + struct hdmi_device *hdev = dev_data; + u32 intc_flag; + + (void)irq; + intc_flag = hdmi_read(hdev, HDMI_INTC_FLAG); + /* clearing flags for HPD plug/unplug */ + if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) { + printk(KERN_INFO "unplugged\n"); + hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0, + HDMI_INTC_FLAG_HPD_UNPLUG); + } + if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) { + printk(KERN_INFO "plugged\n"); + hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0, + HDMI_INTC_FLAG_HPD_PLUG); + } + + return IRQ_HANDLED; +} + +static void hdmi_reg_init(struct hdmi_device *hdev) +{ + /* enable HPD interrupts */ + hdmi_write_mask(hdev, HDMI_INTC_CON, ~0, HDMI_INTC_EN_GLOBAL | + HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG); + /* choose HDMI mode */ + hdmi_write_mask(hdev, HDMI_MODE_SEL, + HDMI_MODE_HDMI_EN, HDMI_MODE_MASK); + /* disable bluescreen */ + hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN); + /* choose bluescreen (fecal) color */ + hdmi_writeb(hdev, HDMI_BLUE_SCREEN_0, 0x12); + hdmi_writeb(hdev, HDMI_BLUE_SCREEN_1, 0x34); + hdmi_writeb(hdev, HDMI_BLUE_SCREEN_2, 0x56); + /* enable AVI packet every vsync, fixes purple line problem */ + hdmi_writeb(hdev, HDMI_AVI_CON, 0x02); + /* force YUV444, look to CEA-861-D, table 7 for more detail */ + hdmi_writeb(hdev, HDMI_AVI_BYTE(0), 2 << 5); + hdmi_write_mask(hdev, HDMI_CON_1, 2, 3 << 5); +} + +static void hdmi_timing_apply(struct hdmi_device *hdev, + const struct hdmi_preset_conf *conf) +{ + const struct hdmi_core_regs *core = &conf->core; + const struct hdmi_tg_regs *tg = &conf->tg; + + /* setting core registers */ + hdmi_writeb(hdev, HDMI_H_BLANK_0, core->h_blank[0]); + hdmi_writeb(hdev, HDMI_H_BLANK_1, core->h_blank[1]); + hdmi_writeb(hdev, HDMI_V_BLANK_0, core->v_blank[0]); + hdmi_writeb(hdev, HDMI_V_BLANK_1, core->v_blank[1]); + hdmi_writeb(hdev, HDMI_V_BLANK_2, core->v_blank[2]); + hdmi_writeb(hdev, HDMI_H_V_LINE_0, core->h_v_line[0]); + hdmi_writeb(hdev, HDMI_H_V_LINE_1, core->h_v_line[1]); + hdmi_writeb(hdev, HDMI_H_V_LINE_2, core->h_v_line[2]); + hdmi_writeb(hdev, HDMI_VSYNC_POL, core->vsync_pol[0]); + hdmi_writeb(hdev, HDMI_INT_PRO_MODE, core->int_pro_mode[0]); + hdmi_writeb(hdev, HDMI_V_BLANK_F_0, core->v_blank_f[0]); + hdmi_writeb(hdev, HDMI_V_BLANK_F_1, core->v_blank_f[1]); + hdmi_writeb(hdev, HDMI_V_BLANK_F_2, core->v_blank_f[2]); + hdmi_writeb(hdev, HDMI_H_SYNC_GEN_0, core->h_sync_gen[0]); + hdmi_writeb(hdev, HDMI_H_SYNC_GEN_1, core->h_sync_gen[1]); + hdmi_writeb(hdev, HDMI_H_SYNC_GEN_2, core->h_sync_gen[2]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_0, core->v_sync_gen1[0]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_1, core->v_sync_gen1[1]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_2, core->v_sync_gen1[2]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_0, core->v_sync_gen2[0]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_1, core->v_sync_gen2[1]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_2, core->v_sync_gen2[2]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_0, core->v_sync_gen3[0]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_1, core->v_sync_gen3[1]); + hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_2, core->v_sync_gen3[2]); + /* Timing generator registers */ + hdmi_writeb(hdev, HDMI_TG_H_FSZ_L, tg->h_fsz_l); + hdmi_writeb(hdev, HDMI_TG_H_FSZ_H, tg->h_fsz_h); + hdmi_writeb(hdev, HDMI_TG_HACT_ST_L, tg->hact_st_l); + hdmi_writeb(hdev, HDMI_TG_HACT_ST_H, tg->hact_st_h); + hdmi_writeb(hdev, HDMI_TG_HACT_SZ_L, tg->hact_sz_l); + hdmi_writeb(hdev, HDMI_TG_HACT_SZ_H, tg->hact_sz_h); + hdmi_writeb(hdev, HDMI_TG_V_FSZ_L, tg->v_fsz_l); + hdmi_writeb(hdev, HDMI_TG_V_FSZ_H, tg->v_fsz_h); + hdmi_writeb(hdev, HDMI_TG_VSYNC_L, tg->vsync_l); + hdmi_writeb(hdev, HDMI_TG_VSYNC_H, tg->vsync_h); + hdmi_writeb(hdev, HDMI_TG_VSYNC2_L, tg->vsync2_l); + hdmi_writeb(hdev, HDMI_TG_VSYNC2_H, tg->vsync2_h); + hdmi_writeb(hdev, HDMI_TG_VACT_ST_L, tg->vact_st_l); + hdmi_writeb(hdev, HDMI_TG_VACT_ST_H, tg->vact_st_h); + hdmi_writeb(hdev, HDMI_TG_VACT_SZ_L, tg->vact_sz_l); + hdmi_writeb(hdev, HDMI_TG_VACT_SZ_H, tg->vact_sz_h); + hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_L, tg->field_chg_l); + hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_H, tg->field_chg_h); + hdmi_writeb(hdev, HDMI_TG_VACT_ST2_L, tg->vact_st2_l); + hdmi_writeb(hdev, HDMI_TG_VACT_ST2_H, tg->vact_st2_h); + hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_L, tg->vsync_top_hdmi_l); + hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_H, tg->vsync_top_hdmi_h); + hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_L, tg->vsync_bot_hdmi_l); + hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_H, tg->vsync_bot_hdmi_h); + hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_L, tg->field_top_hdmi_l); + hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_H, tg->field_top_hdmi_h); + hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_L, tg->field_bot_hdmi_l); + hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_H, tg->field_bot_hdmi_h); +} + +static int hdmi_conf_apply(struct hdmi_device *hdmi_dev) +{ + struct device *dev = hdmi_dev->dev; + const struct hdmi_preset_conf *conf = hdmi_dev->cur_conf; + struct v4l2_dv_preset preset; + int ret; + + dev_dbg(dev, "%s\n", __func__); + + /* reset hdmiphy */ + hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT, ~0, HDMI_PHY_SW_RSTOUT); + mdelay(10); + hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT, 0, HDMI_PHY_SW_RSTOUT); + mdelay(10); + + /* configure presets */ + preset.preset = hdmi_dev->cur_preset; + ret = v4l2_subdev_call(hdmi_dev->phy_sd, video, s_dv_preset, &preset); + if (ret) { + dev_err(dev, "failed to set preset (%u)\n", preset.preset); + return ret; + } + + /* resetting HDMI core */ + hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT, 0, HDMI_CORE_SW_RSTOUT); + mdelay(10); + hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT, ~0, HDMI_CORE_SW_RSTOUT); + mdelay(10); + + hdmi_reg_init(hdmi_dev); + + /* setting core registers */ + hdmi_timing_apply(hdmi_dev, conf); + + return 0; +} + +static void hdmi_dumpregs(struct hdmi_device *hdev, char *prefix) +{ +#define DUMPREG(reg_id) \ + dev_dbg(hdev->dev, "%s:" #reg_id " = %08x\n", prefix, \ + readl(hdev->regs + reg_id)) + + dev_dbg(hdev->dev, "%s: ---- CONTROL REGISTERS ----\n", prefix); + DUMPREG(HDMI_INTC_FLAG); + DUMPREG(HDMI_INTC_CON); + DUMPREG(HDMI_HPD_STATUS); + DUMPREG(HDMI_PHY_RSTOUT); + DUMPREG(HDMI_PHY_VPLL); + DUMPREG(HDMI_PHY_CMU); + DUMPREG(HDMI_CORE_RSTOUT); + + dev_dbg(hdev->dev, "%s: ---- CORE REGISTERS ----\n", prefix); + DUMPREG(HDMI_CON_0); + DUMPREG(HDMI_CON_1); + DUMPREG(HDMI_CON_2); + DUMPREG(HDMI_SYS_STATUS); + DUMPREG(HDMI_PHY_STATUS); + DUMPREG(HDMI_STATUS_EN); + DUMPREG(HDMI_HPD); + DUMPREG(HDMI_MODE_SEL); + DUMPREG(HDMI_HPD_GEN); + DUMPREG(HDMI_DC_CONTROL); + DUMPREG(HDMI_VIDEO_PATTERN_GEN); + + dev_dbg(hdev->dev, "%s: ---- CORE SYNC REGISTERS ----\n", prefix); + DUMPREG(HDMI_H_BLANK_0); + DUMPREG(HDMI_H_BLANK_1); + DUMPREG(HDMI_V_BLANK_0); + DUMPREG(HDMI_V_BLANK_1); + DUMPREG(HDMI_V_BLANK_2); + DUMPREG(HDMI_H_V_LINE_0); + DUMPREG(HDMI_H_V_LINE_1); + DUMPREG(HDMI_H_V_LINE_2); + DUMPREG(HDMI_VSYNC_POL); + DUMPREG(HDMI_INT_PRO_MODE); + DUMPREG(HDMI_V_BLANK_F_0); + DUMPREG(HDMI_V_BLANK_F_1); + DUMPREG(HDMI_V_BLANK_F_2); + DUMPREG(HDMI_H_SYNC_GEN_0); + DUMPREG(HDMI_H_SYNC_GEN_1); + DUMPREG(HDMI_H_SYNC_GEN_2); + DUMPREG(HDMI_V_SYNC_GEN_1_0); + DUMPREG(HDMI_V_SYNC_GEN_1_1); + DUMPREG(HDMI_V_SYNC_GEN_1_2); + DUMPREG(HDMI_V_SYNC_GEN_2_0); + DUMPREG(HDMI_V_SYNC_GEN_2_1); + DUMPREG(HDMI_V_SYNC_GEN_2_2); + DUMPREG(HDMI_V_SYNC_GEN_3_0); + DUMPREG(HDMI_V_SYNC_GEN_3_1); + DUMPREG(HDMI_V_SYNC_GEN_3_2); + + dev_dbg(hdev->dev, "%s: ---- TG REGISTERS ----\n", prefix); + DUMPREG(HDMI_TG_CMD); + DUMPREG(HDMI_TG_H_FSZ_L); + DUMPREG(HDMI_TG_H_FSZ_H); + DUMPREG(HDMI_TG_HACT_ST_L); + DUMPREG(HDMI_TG_HACT_ST_H); + DUMPREG(HDMI_TG_HACT_SZ_L); + DUMPREG(HDMI_TG_HACT_SZ_H); + DUMPREG(HDMI_TG_V_FSZ_L); + DUMPREG(HDMI_TG_V_FSZ_H); + DUMPREG(HDMI_TG_VSYNC_L); + DUMPREG(HDMI_TG_VSYNC_H); + DUMPREG(HDMI_TG_VSYNC2_L); + DUMPREG(HDMI_TG_VSYNC2_H); + DUMPREG(HDMI_TG_VACT_ST_L); + DUMPREG(HDMI_TG_VACT_ST_H); + DUMPREG(HDMI_TG_VACT_SZ_L); + DUMPREG(HDMI_TG_VACT_SZ_H); + DUMPREG(HDMI_TG_FIELD_CHG_L); + DUMPREG(HDMI_TG_FIELD_CHG_H); + DUMPREG(HDMI_TG_VACT_ST2_L); + DUMPREG(HDMI_TG_VACT_ST2_H); + DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_L); + DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_H); + DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_L); + DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_H); + DUMPREG(HDMI_TG_FIELD_TOP_HDMI_L); + DUMPREG(HDMI_TG_FIELD_TOP_HDMI_H); + DUMPREG(HDMI_TG_FIELD_BOT_HDMI_L); + DUMPREG(HDMI_TG_FIELD_BOT_HDMI_H); +#undef DUMPREG +} + +static const struct hdmi_preset_conf hdmi_conf_480p = { + .core = { + .h_blank = {0x8a, 0x00}, + .v_blank = {0x0d, 0x6a, 0x01}, + .h_v_line = {0x0d, 0xa2, 0x35}, + .vsync_pol = {0x01}, + .int_pro_mode = {0x00}, + .v_blank_f = {0x00, 0x00, 0x00}, + .h_sync_gen = {0x0e, 0x30, 0x11}, + .v_sync_gen1 = {0x0f, 0x90, 0x00}, + /* other don't care */ + }, + .tg = { + 0x00, /* cmd */ + 0x5a, 0x03, /* h_fsz */ + 0x8a, 0x00, 0xd0, 0x02, /* hact */ + 0x0d, 0x02, /* v_fsz */ + 0x01, 0x00, 0x33, 0x02, /* vsync */ + 0x2d, 0x00, 0xe0, 0x01, /* vact */ + 0x33, 0x02, /* field_chg */ + 0x49, 0x02, /* vact_st2 */ + 0x01, 0x00, 0x33, 0x02, /* vsync top/bot */ + 0x01, 0x00, 0x33, 0x02, /* field top/bot */ + }, + .mbus_fmt = { + .width = 720, + .height = 480, + .code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */ + .field = V4L2_FIELD_NONE, + }, +}; + +static const struct hdmi_preset_conf hdmi_conf_720p60 = { + .core = { + .h_blank = {0x72, 0x01}, + .v_blank = {0xee, 0xf2, 0x00}, + .h_v_line = {0xee, 0x22, 0x67}, + .vsync_pol = {0x00}, + .int_pro_mode = {0x00}, + .v_blank_f = {0x00, 0x00, 0x00}, /* don't care */ + .h_sync_gen = {0x6c, 0x50, 0x02}, + .v_sync_gen1 = {0x0a, 0x50, 0x00}, + /* other don't care */ + }, + .tg = { + 0x00, /* cmd */ + 0x72, 0x06, /* h_fsz */ + 0x72, 0x01, 0x00, 0x05, /* hact */ + 0xee, 0x02, /* v_fsz */ + 0x01, 0x00, 0x33, 0x02, /* vsync */ + 0x1e, 0x00, 0xd0, 0x02, /* vact */ + 0x33, 0x02, /* field_chg */ + 0x49, 0x02, /* vact_st2 */ + 0x01, 0x00, 0x33, 0x02, /* vsync top/bot */ + 0x01, 0x00, 0x33, 0x02, /* field top/bot */ + }, + .mbus_fmt = { + .width = 1280, + .height = 720, + .code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */ + .field = V4L2_FIELD_NONE, + }, +}; + +static const struct hdmi_preset_conf hdmi_conf_1080p50 = { + .core = { + .h_blank = {0xd0, 0x02}, + .v_blank = {0x65, 0x6c, 0x01}, + .h_v_line = {0x65, 0x04, 0xa5}, + .vsync_pol = {0x00}, + .int_pro_mode = {0x00}, + .v_blank_f = {0x00, 0x00, 0x00}, /* don't care */ + .h_sync_gen = {0x0e, 0xea, 0x08}, + .v_sync_gen1 = {0x09, 0x40, 0x00}, + /* other don't care */ + }, + .tg = { + 0x00, /* cmd */ + 0x98, 0x08, /* h_fsz */ + 0x18, 0x01, 0x80, 0x07, /* hact */ + 0x65, 0x04, /* v_fsz */ + 0x01, 0x00, 0x33, 0x02, /* vsync */ + 0x2d, 0x00, 0x38, 0x04, /* vact */ + 0x33, 0x02, /* field_chg */ + 0x49, 0x02, /* vact_st2 */ + 0x01, 0x00, 0x33, 0x02, /* vsync top/bot */ + 0x01, 0x00, 0x33, 0x02, /* field top/bot */ + }, + .mbus_fmt = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */ + .field = V4L2_FIELD_NONE, + }, +}; + +static const struct hdmi_preset_conf hdmi_conf_1080p60 = { + .core = { + .h_blank = {0x18, 0x01}, + .v_blank = {0x65, 0x6c, 0x01}, + .h_v_line = {0x65, 0x84, 0x89}, + .vsync_pol = {0x00}, + .int_pro_mode = {0x00}, + .v_blank_f = {0x00, 0x00, 0x00}, /* don't care */ + .h_sync_gen = {0x56, 0x08, 0x02}, + .v_sync_gen1 = {0x09, 0x40, 0x00}, + /* other don't care */ + }, + .tg = { + 0x00, /* cmd */ + 0x98, 0x08, /* h_fsz */ + 0x18, 0x01, 0x80, 0x07, /* hact */ + 0x65, 0x04, /* v_fsz */ + 0x01, 0x00, 0x33, 0x02, /* vsync */ + 0x2d, 0x00, 0x38, 0x04, /* vact */ + 0x33, 0x02, /* field_chg */ + 0x48, 0x02, /* vact_st2 */ + 0x01, 0x00, 0x01, 0x00, /* vsync top/bot */ + 0x01, 0x00, 0x33, 0x02, /* field top/bot */ + }, + .mbus_fmt = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */ + .field = V4L2_FIELD_NONE, + }, +}; + +static const struct { + u32 preset; + const struct hdmi_preset_conf *conf; +} hdmi_conf[] = { + { V4L2_DV_480P59_94, &hdmi_conf_480p }, + { V4L2_DV_720P59_94, &hdmi_conf_720p60 }, + { V4L2_DV_1080P50, &hdmi_conf_1080p50 }, + { V4L2_DV_1080P30, &hdmi_conf_1080p60 }, + { V4L2_DV_1080P60, &hdmi_conf_1080p60 }, +}; + +static const struct hdmi_preset_conf *hdmi_preset2conf(u32 preset) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hdmi_conf); ++i) + if (hdmi_conf[i].preset == preset) + return hdmi_conf[i].conf; + return NULL; +} + +static int hdmi_streamon(struct hdmi_device *hdev) +{ + struct device *dev = hdev->dev; + struct hdmi_resources *res = &hdev->res; + int ret, tries; + + dev_dbg(dev, "%s\n", __func__); + + ret = v4l2_subdev_call(hdev->phy_sd, video, s_stream, 1); + if (ret) + return ret; + + /* waiting for HDMIPHY's PLL to get to steady state */ + for (tries = 100; tries; --tries) { + u32 val = hdmi_read(hdev, HDMI_PHY_STATUS); + if (val & HDMI_PHY_STATUS_READY) + break; + mdelay(1); + } + /* steady state not achieved */ + if (tries == 0) { + dev_err(dev, "hdmiphy's pll could not reach steady state.\n"); + v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); + hdmi_dumpregs(hdev, "s_stream"); + return -EIO; + } + + /* hdmiphy clock is used for HDMI in streaming mode */ + clk_disable(res->sclk_hdmi); + clk_set_parent(res->sclk_hdmi, res->sclk_hdmiphy); + clk_enable(res->sclk_hdmi); + + /* enable HDMI and timing generator */ + hdmi_write_mask(hdev, HDMI_CON_0, ~0, HDMI_EN); + hdmi_write_mask(hdev, HDMI_TG_CMD, ~0, HDMI_TG_EN); + hdmi_dumpregs(hdev, "streamon"); + return 0; +} + +static int hdmi_streamoff(struct hdmi_device *hdev) +{ + struct device *dev = hdev->dev; + struct hdmi_resources *res = &hdev->res; + + dev_dbg(dev, "%s\n", __func__); + + hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_EN); + hdmi_write_mask(hdev, HDMI_TG_CMD, 0, HDMI_TG_EN); + + /* pixel(vpll) clock is used for HDMI in config mode */ + clk_disable(res->sclk_hdmi); + clk_set_parent(res->sclk_hdmi, res->sclk_pixel); + clk_enable(res->sclk_hdmi); + + v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0); + + hdmi_dumpregs(hdev, "streamoff"); + return 0; +} + +static int hdmi_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + struct device *dev = hdev->dev; + + dev_dbg(dev, "%s(%d)\n", __func__, enable); + if (enable) + return hdmi_streamon(hdev); + return hdmi_streamoff(hdev); +} + +static void hdmi_resource_poweron(struct hdmi_resources *res) +{ + /* turn HDMI power on */ + regulator_bulk_enable(res->regul_count, res->regul_bulk); + /* power-on hdmi physical interface */ + clk_enable(res->hdmiphy); + /* use VPP as parent clock; HDMIPHY is not working yet */ + clk_set_parent(res->sclk_hdmi, res->sclk_pixel); + /* turn clocks on */ + clk_enable(res->sclk_hdmi); +} + +static void hdmi_resource_poweroff(struct hdmi_resources *res) +{ + /* turn clocks off */ + clk_disable(res->sclk_hdmi); + /* power-off hdmiphy */ + clk_disable(res->hdmiphy); + /* turn HDMI power off */ + regulator_bulk_disable(res->regul_count, res->regul_bulk); +} + +static int hdmi_s_power(struct v4l2_subdev *sd, int on) +{ + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + int ret; + + if (on) + ret = pm_runtime_get_sync(hdev->dev); + else + ret = pm_runtime_put_sync(hdev->dev); + /* only values < 0 indicate errors */ + return IS_ERR_VALUE(ret) ? ret : 0; +} + +static int hdmi_s_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *preset) +{ + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + struct device *dev = hdev->dev; + const struct hdmi_preset_conf *conf; + + conf = hdmi_preset2conf(preset->preset); + if (conf == NULL) { + dev_err(dev, "preset (%u) not supported\n", preset->preset); + return -EINVAL; + } + hdev->cur_conf = conf; + hdev->cur_preset = preset->preset; + return 0; +} + +static int hdmi_g_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *preset) +{ + memset(preset, 0, sizeof(*preset)); + preset->preset = sd_to_hdmi_dev(sd)->cur_preset; + return 0; +} + +static int hdmi_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + struct device *dev = hdev->dev; + + dev_dbg(dev, "%s\n", __func__); + if (!hdev->cur_conf) + return -EINVAL; + *fmt = hdev->cur_conf->mbus_fmt; + return 0; +} + +static int hdmi_enum_dv_presets(struct v4l2_subdev *sd, + struct v4l2_dv_enum_preset *preset) +{ + if (preset->index >= ARRAY_SIZE(hdmi_conf)) + return -EINVAL; + return v4l_fill_dv_preset_info(hdmi_conf[preset->index].preset, preset); +} + +static const struct v4l2_subdev_core_ops hdmi_sd_core_ops = { + .s_power = hdmi_s_power, +}; + +static const struct v4l2_subdev_video_ops hdmi_sd_video_ops = { + .s_dv_preset = hdmi_s_dv_preset, + .g_dv_preset = hdmi_g_dv_preset, + .enum_dv_presets = hdmi_enum_dv_presets, + .g_mbus_fmt = hdmi_g_mbus_fmt, + .s_stream = hdmi_s_stream, +}; + +static const struct v4l2_subdev_ops hdmi_sd_ops = { + .core = &hdmi_sd_core_ops, + .video = &hdmi_sd_video_ops, +}; + +static int hdmi_runtime_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + + dev_dbg(dev, "%s\n", __func__); + hdmi_resource_poweroff(&hdev->res); + return 0; +} + +static int hdmi_runtime_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct hdmi_device *hdev = sd_to_hdmi_dev(sd); + int ret = 0; + + dev_dbg(dev, "%s\n", __func__); + + hdmi_resource_poweron(&hdev->res); + + ret = hdmi_conf_apply(hdev); + if (ret) + goto fail; + + dev_dbg(dev, "poweron succeed\n"); + + return 0; + +fail: + hdmi_resource_poweroff(&hdev->res); + dev_err(dev, "poweron failed\n"); + + return ret; +} + +static const struct dev_pm_ops hdmi_pm_ops = { + .runtime_suspend = hdmi_runtime_suspend, + .runtime_resume = hdmi_runtime_resume, +}; + +static void hdmi_resources_cleanup(struct hdmi_device *hdev) +{ + struct hdmi_resources *res = &hdev->res; + + dev_dbg(hdev->dev, "HDMI resource cleanup\n"); + /* put clocks, power */ + if (res->regul_count) + regulator_bulk_free(res->regul_count, res->regul_bulk); + /* kfree is NULL-safe */ + kfree(res->regul_bulk); + if (!IS_ERR_OR_NULL(res->hdmiphy)) + clk_put(res->hdmiphy); + if (!IS_ERR_OR_NULL(res->sclk_hdmiphy)) + clk_put(res->sclk_hdmiphy); + if (!IS_ERR_OR_NULL(res->sclk_pixel)) + clk_put(res->sclk_pixel); + if (!IS_ERR_OR_NULL(res->sclk_hdmi)) + clk_put(res->sclk_hdmi); + if (!IS_ERR_OR_NULL(res->hdmi)) + clk_put(res->hdmi); + memset(res, 0, sizeof *res); +} + +static int hdmi_resources_init(struct hdmi_device *hdev) +{ + struct device *dev = hdev->dev; + struct hdmi_resources *res = &hdev->res; + static char *supply[] = { + "hdmi-en", + "vdd", + "vdd_osc", + "vdd_pll", + }; + int i, ret; + + dev_dbg(dev, "HDMI resource init\n"); + + memset(res, 0, sizeof *res); + /* get clocks, power */ + + res->hdmi = clk_get(dev, "hdmi"); + if (IS_ERR_OR_NULL(res->hdmi)) { + dev_err(dev, "failed to get clock 'hdmi'\n"); + goto fail; + } + res->sclk_hdmi = clk_get(dev, "sclk_hdmi"); + if (IS_ERR_OR_NULL(res->sclk_hdmi)) { + dev_err(dev, "failed to get clock 'sclk_hdmi'\n"); + goto fail; + } + res->sclk_pixel = clk_get(dev, "sclk_pixel"); + if (IS_ERR_OR_NULL(res->sclk_pixel)) { + dev_err(dev, "failed to get clock 'sclk_pixel'\n"); + goto fail; + } + res->sclk_hdmiphy = clk_get(dev, "sclk_hdmiphy"); + if (IS_ERR_OR_NULL(res->sclk_hdmiphy)) { + dev_err(dev, "failed to get clock 'sclk_hdmiphy'\n"); + goto fail; + } + res->hdmiphy = clk_get(dev, "hdmiphy"); + if (IS_ERR_OR_NULL(res->hdmiphy)) { + dev_err(dev, "failed to get clock 'hdmiphy'\n"); + goto fail; + } + res->regul_bulk = kzalloc(ARRAY_SIZE(supply) * + sizeof res->regul_bulk[0], GFP_KERNEL); + if (!res->regul_bulk) { + dev_err(dev, "failed to get memory for regulators\n"); + goto fail; + } + for (i = 0; i < ARRAY_SIZE(supply); ++i) { + res->regul_bulk[i].supply = supply[i]; + res->regul_bulk[i].consumer = NULL; + } + + ret = regulator_bulk_get(dev, ARRAY_SIZE(supply), res->regul_bulk); + if (ret) { + dev_err(dev, "failed to get regulators\n"); + goto fail; + } + res->regul_count = ARRAY_SIZE(supply); + + return 0; +fail: + dev_err(dev, "HDMI resource init - failed\n"); + hdmi_resources_cleanup(hdev); + return -ENODEV; +} + +static int __devinit hdmi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct i2c_adapter *phy_adapter; + struct v4l2_subdev *sd; + struct hdmi_device *hdmi_dev = NULL; + struct hdmi_driver_data *drv_data; + int ret; + + dev_dbg(dev, "probe start\n"); + + hdmi_dev = kzalloc(sizeof(*hdmi_dev), GFP_KERNEL); + if (!hdmi_dev) { + dev_err(dev, "out of memory\n"); + ret = -ENOMEM; + goto fail; + } + + hdmi_dev->dev = dev; + + ret = hdmi_resources_init(hdmi_dev); + if (ret) + goto fail_hdev; + + /* mapping HDMI registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "get memory resource failed.\n"); + ret = -ENXIO; + goto fail_init; + } + + hdmi_dev->regs = ioremap(res->start, resource_size(res)); + if (hdmi_dev->regs == NULL) { + dev_err(dev, "register mapping failed.\n"); + ret = -ENXIO; + goto fail_hdev; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "get interrupt resource failed.\n"); + ret = -ENXIO; + goto fail_regs; + } + + ret = request_irq(res->start, hdmi_irq_handler, 0, "hdmi", hdmi_dev); + if (ret) { + dev_err(dev, "request interrupt failed.\n"); + goto fail_regs; + } + hdmi_dev->irq = res->start; + + /* setting v4l2 name to prevent WARN_ON in v4l2_device_register */ + strlcpy(hdmi_dev->v4l2_dev.name, dev_name(dev), + sizeof(hdmi_dev->v4l2_dev.name)); + /* passing NULL owner prevents driver from erasing drvdata */ + ret = v4l2_device_register(NULL, &hdmi_dev->v4l2_dev); + if (ret) { + dev_err(dev, "could not register v4l2 device.\n"); + goto fail_irq; + } + + drv_data = (struct hdmi_driver_data *) + platform_get_device_id(pdev)->driver_data; + phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus); + if (phy_adapter == NULL) { + dev_err(dev, "adapter request failed\n"); + ret = -ENXIO; + goto fail_vdev; + } + + hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev, + phy_adapter, &hdmiphy_info, NULL); + /* on failure or not adapter is no longer useful */ + i2c_put_adapter(phy_adapter); + if (hdmi_dev->phy_sd == NULL) { + dev_err(dev, "missing subdev for hdmiphy\n"); + ret = -ENODEV; + goto fail_vdev; + } + + clk_enable(hdmi_dev->res.hdmi); + + pm_runtime_enable(dev); + + sd = &hdmi_dev->sd; + v4l2_subdev_init(sd, &hdmi_sd_ops); + sd->owner = THIS_MODULE; + + strlcpy(sd->name, "s5p-hdmi", sizeof sd->name); + hdmi_dev->cur_preset = HDMI_DEFAULT_PRESET; + /* FIXME: missing fail preset is not supported */ + hdmi_dev->cur_conf = hdmi_preset2conf(hdmi_dev->cur_preset); + + /* storing subdev for call that have only access to struct device */ + dev_set_drvdata(dev, sd); + + dev_info(dev, "probe sucessful\n"); + + return 0; + +fail_vdev: + v4l2_device_unregister(&hdmi_dev->v4l2_dev); + +fail_irq: + free_irq(hdmi_dev->irq, hdmi_dev); + +fail_regs: + iounmap(hdmi_dev->regs); + +fail_init: + hdmi_resources_cleanup(hdmi_dev); + +fail_hdev: + kfree(hdmi_dev); + +fail: + dev_err(dev, "probe failed\n"); + return ret; +} + +static int __devexit hdmi_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct hdmi_device *hdmi_dev = sd_to_hdmi_dev(sd); + + pm_runtime_disable(dev); + clk_disable(hdmi_dev->res.hdmi); + v4l2_device_unregister(&hdmi_dev->v4l2_dev); + disable_irq(hdmi_dev->irq); + free_irq(hdmi_dev->irq, hdmi_dev); + iounmap(hdmi_dev->regs); + hdmi_resources_cleanup(hdmi_dev); + kfree(hdmi_dev); + dev_info(dev, "remove sucessful\n"); + + return 0; +} + +static struct platform_driver hdmi_driver __refdata = { + .probe = hdmi_probe, + .remove = __devexit_p(hdmi_remove), + .id_table = hdmi_driver_types, + .driver = { + .name = "s5p-hdmi", + .owner = THIS_MODULE, + .pm = &hdmi_pm_ops, + } +}; + +/* D R I V E R I N I T I A L I Z A T I O N */ + +static int __init hdmi_init(void) +{ + int ret; + static const char banner[] __initdata = KERN_INFO \ + "Samsung HDMI output driver, " + "(c) 2010-2011 Samsung Electronics Co., Ltd.\n"; + printk(banner); + + ret = platform_driver_register(&hdmi_driver); + if (ret) + printk(KERN_ERR "HDMI platform driver register failed\n"); + + return ret; +} +module_init(hdmi_init); + +static void __exit hdmi_exit(void) +{ + platform_driver_unregister(&hdmi_driver); +} +module_exit(hdmi_exit); + + diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/video/s5p-tv/hdmiphy_drv.c new file mode 100644 index 0000000..6693f4a --- /dev/null +++ b/drivers/media/video/s5p-tv/hdmiphy_drv.c @@ -0,0 +1,188 @@ +/* + * Samsung HDMI Physical interface driver + * + * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd + * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> + +#include <media/v4l2-subdev.h> + +MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung HDMI Physical interface driver"); +MODULE_LICENSE("GPL"); + +struct hdmiphy_conf { + u32 preset; + const u8 *data; +}; + +static const u8 hdmiphy_conf27[32] = { + 0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40, + 0x6B, 0x10, 0x02, 0x51, 0xDf, 0xF2, 0x54, 0x87, + 0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0, + 0x22, 0x40, 0xe3, 0x26, 0x00, 0x00, 0x00, 0x00, +}; + +static const u8 hdmiphy_conf74_175[32] = { + 0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B, + 0x6D, 0x10, 0x01, 0x51, 0xef, 0xF3, 0x54, 0xb9, + 0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0, + 0x22, 0x40, 0xa5, 0x26, 0x01, 0x00, 0x00, 0x00, +}; + +static const u8 hdmiphy_conf74_25[32] = { + 0x01, 0x05, 0x00, 0xd8, 0x10, 0x9c, 0xf8, 0x40, + 0x6a, 0x10, 0x01, 0x51, 0xff, 0xf1, 0x54, 0xba, + 0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xe0, + 0x22, 0x40, 0xa4, 0x26, 0x01, 0x00, 0x00, 0x00, +}; + +static const u8 hdmiphy_conf148_5[32] = { + 0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xf8, 0x40, + 0x6A, 0x18, 0x00, 0x51, 0xff, 0xF1, 0x54, 0xba, + 0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xE0, + 0x22, 0x40, 0xa4, 0x26, 0x02, 0x00, 0x00, 0x00, +}; + +static const struct hdmiphy_conf hdmiphy_conf[] = { + { V4L2_DV_480P59_94, hdmiphy_conf27 }, + { V4L2_DV_1080P30, hdmiphy_conf74_175 }, + { V4L2_DV_720P59_94, hdmiphy_conf74_175 }, + { V4L2_DV_720P60, hdmiphy_conf74_25 }, + { V4L2_DV_1080P50, hdmiphy_conf148_5 }, + { V4L2_DV_1080P60, hdmiphy_conf148_5 }, +}; + +const u8 *hdmiphy_preset2conf(u32 preset) +{ + int i; + for (i = 0; i < ARRAY_SIZE(hdmiphy_conf); ++i) + if (hdmiphy_conf[i].preset == preset) + return hdmiphy_conf[i].data; + return NULL; +} + +static int hdmiphy_s_power(struct v4l2_subdev *sd, int on) +{ + /* to be implemented */ + return 0; +} + +static int hdmiphy_s_dv_preset(struct v4l2_subdev *sd, + struct v4l2_dv_preset *preset) +{ + const u8 *data; + u8 buffer[32]; + int ret; + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct device *dev = &client->dev; + + dev_info(dev, "s_dv_preset(preset = %d)\n", preset->preset); + data = hdmiphy_preset2conf(preset->preset); + if (!data) { + dev_err(dev, "format not supported\n"); + return -EINVAL; + } + + /* storing configuration to the device */ + memcpy(buffer, data, 32); + ret = i2c_master_send(client, buffer, 32); + if (ret != 32) { + dev_err(dev, "failed to configure HDMIPHY via I2C\n"); + return -EIO; + } + + return 0; +} + +static int hdmiphy_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct device *dev = &client->dev; + u8 buffer[2]; + int ret; + + dev_info(dev, "s_stream(%d)\n", enable); + /* going to/from configuration from/to operation mode */ + buffer[0] = 0x1f; + buffer[1] = enable ? 0x80 : 0x00; + + ret = i2c_master_send(client, buffer, 2); + if (ret != 2) { + dev_err(dev, "stream (%d) failed\n", enable); + return -EIO; + } + return 0; +} + +static const struct v4l2_subdev_core_ops hdmiphy_core_ops = { + .s_power = hdmiphy_s_power, +}; + +static const struct v4l2_subdev_video_ops hdmiphy_video_ops = { + .s_dv_preset = hdmiphy_s_dv_preset, + .s_stream = hdmiphy_s_stream, +}; + +static const struct v4l2_subdev_ops hdmiphy_ops = { + .core = &hdmiphy_core_ops, + .video = &hdmiphy_video_ops, +}; + +static int __devinit hdmiphy_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + static struct v4l2_subdev sd; + + v4l2_i2c_subdev_init(&sd, client, &hdmiphy_ops); + dev_info(&client->dev, "probe successful\n"); + return 0; +} + +static int __devexit hdmiphy_remove(struct i2c_client *client) +{ + dev_info(&client->dev, "remove successful\n"); + return 0; +} + +static const struct i2c_device_id hdmiphy_id[] = { + { "hdmiphy", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, hdmiphy_id); + +static struct i2c_driver hdmiphy_driver = { + .driver = { + .name = "s5p-hdmiphy", + .owner = THIS_MODULE, + }, + .probe = hdmiphy_probe, + .remove = __devexit_p(hdmiphy_remove), + .id_table = hdmiphy_id, +}; + +static int __init hdmiphy_init(void) +{ + return i2c_add_driver(&hdmiphy_driver); +} +module_init(hdmiphy_init); + +static void __exit hdmiphy_exit(void) +{ + i2c_del_driver(&hdmiphy_driver); +} +module_exit(hdmiphy_exit); diff --git a/drivers/media/video/s5p-tv/mixer.h b/drivers/media/video/s5p-tv/mixer.h new file mode 100644 index 0000000..e224224 --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer.h @@ -0,0 +1,354 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#ifndef SAMSUNG_MIXER_H +#define SAMSUNG_MIXER_H + +#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG + #define DEBUG +#endif + +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <media/v4l2-device.h> +#include <media/videobuf2-core.h> + +#include "regs-mixer.h" + +/** maximum number of output interfaces */ +#define MXR_MAX_OUTPUTS 2 +/** maximum number of input interfaces (layers) */ +#define MXR_MAX_LAYERS 3 +#define MXR_DRIVER_NAME "s5p-mixer" +/** maximal number of planes for every layer */ +#define MXR_MAX_PLANES 2 + +#define MXR_ENABLE 1 +#define MXR_DISABLE 0 + +/** description of a macroblock for packed formats */ +struct mxr_block { + /** vertical number of pixels in macroblock */ + unsigned int width; + /** horizontal number of pixels in macroblock */ + unsigned int height; + /** size of block in bytes */ + unsigned int size; +}; + +/** description of supported format */ +struct mxr_format { + /** format name/mnemonic */ + const char *name; + /** fourcc identifier */ + u32 fourcc; + /** colorspace identifier */ + enum v4l2_colorspace colorspace; + /** number of planes in image data */ + int num_planes; + /** description of block for each plane */ + struct mxr_block plane[MXR_MAX_PLANES]; + /** number of subframes in image data */ + int num_subframes; + /** specifies to which subframe belong given plane */ + int plane2subframe[MXR_MAX_PLANES]; + /** internal code, driver dependant */ + unsigned long cookie; +}; + +/** description of crop configuration for image */ +struct mxr_crop { + /** width of layer in pixels */ + unsigned int full_width; + /** height of layer in pixels */ + unsigned int full_height; + /** horizontal offset of first pixel to be displayed */ + unsigned int x_offset; + /** vertical offset of first pixel to be displayed */ + unsigned int y_offset; + /** width of displayed data in pixels */ + unsigned int width; + /** height of displayed data in pixels */ + unsigned int height; + /** indicate which fields are present in buffer */ + unsigned int field; +}; + +/** description of transformation from source to destination image */ +struct mxr_geometry { + /** cropping for source image */ + struct mxr_crop src; + /** cropping for destination image */ + struct mxr_crop dst; + /** layer-dependant description of horizontal scaling */ + unsigned int x_ratio; + /** layer-dependant description of vertical scaling */ + unsigned int y_ratio; +}; + +/** instance of a buffer */ +struct mxr_buffer { + /** common v4l buffer stuff -- must be first */ + struct vb2_buffer vb; + /** node for layer's lists */ + struct list_head list; +}; + + +/** internal states of layer */ +enum mxr_layer_state { + /** layers is not shown */ + MXR_LAYER_IDLE = 0, + /** state between STREAMON and hardware start */ + MXR_LAYER_STREAMING_START, + /** layer is shown */ + MXR_LAYER_STREAMING, + /** state before STREAMOFF is finished */ + MXR_LAYER_STREAMING_FINISH, +}; + +/** forward declarations */ +struct mxr_device; +struct mxr_layer; + +/** callback for layers operation */ +struct mxr_layer_ops { + /* TODO: try to port it to subdev API */ + /** handler for resource release function */ + void (*release)(struct mxr_layer *); + /** setting buffer to HW */ + void (*buffer_set)(struct mxr_layer *, struct mxr_buffer *); + /** setting format and geometry in HW */ + void (*format_set)(struct mxr_layer *); + /** streaming stop/start */ + void (*stream_set)(struct mxr_layer *, int); + /** adjusting geometry */ + void (*fix_geometry)(struct mxr_layer *); +}; + +/** layer instance, a single window and content displayed on output */ +struct mxr_layer { + /** parent mixer device */ + struct mxr_device *mdev; + /** layer index (unique identifier) */ + int idx; + /** callbacks for layer methods */ + struct mxr_layer_ops ops; + /** format array */ + const struct mxr_format **fmt_array; + /** size of format array */ + unsigned long fmt_array_size; + + /** lock for protection of list and state fields */ + spinlock_t enq_slock; + /** list for enqueued buffers */ + struct list_head enq_list; + /** buffer currently owned by hardware in temporary registers */ + struct mxr_buffer *update_buf; + /** buffer currently owned by hardware in shadow registers */ + struct mxr_buffer *shadow_buf; + /** state of layer IDLE/STREAMING */ + enum mxr_layer_state state; + + /** mutex for protection of fields below */ + struct mutex mutex; + /** handler for video node */ + struct video_device vfd; + /** queue for output buffers */ + struct vb2_queue vb_queue; + /** current image format */ + const struct mxr_format *fmt; + /** current geometry of image */ + struct mxr_geometry geo; +}; + +/** description of mixers output interface */ +struct mxr_output { + /** name of output */ + char name[32]; + /** output subdev */ + struct v4l2_subdev *sd; + /** cookie used for configuration of registers */ + int cookie; +}; + +/** specify source of output subdevs */ +struct mxr_output_conf { + /** name of output (connector) */ + char *output_name; + /** name of module that generates output subdev */ + char *module_name; + /** cookie need for mixer HW */ + int cookie; +}; + +struct clk; +struct regulator; + +/** auxiliary resources used my mixer */ +struct mxr_resources { + /** interrupt index */ + int irq; + /** pointer to Mixer registers */ + void __iomem *mxr_regs; + /** pointer to Video Processor registers */ + void __iomem *vp_regs; + /** other resources, should used under mxr_device.mutex */ + struct clk *mixer; + struct clk *vp; + struct clk *sclk_mixer; + struct clk *sclk_hdmi; + struct clk *sclk_dac; +}; + +/* event flags used */ +enum mxr_devide_flags { + MXR_EVENT_VSYNC = 0, +}; + +/** drivers instance */ +struct mxr_device { + /** master device */ + struct device *dev; + /** state of each layer */ + struct mxr_layer *layer[MXR_MAX_LAYERS]; + /** state of each output */ + struct mxr_output *output[MXR_MAX_OUTPUTS]; + /** number of registered outputs */ + int output_cnt; + + /* video resources */ + + /** V4L2 device */ + struct v4l2_device v4l2_dev; + /** context of allocator */ + void *alloc_ctx; + /** event wait queue */ + wait_queue_head_t event_queue; + /** state flags */ + unsigned long event_flags; + + /** spinlock for protection of registers */ + spinlock_t reg_slock; + + /** mutex for protection of fields below */ + struct mutex mutex; + /** number of entities depndant on output configuration */ + int n_output; + /** number of users that do streaming */ + int n_streamer; + /** index of current output */ + int current_output; + /** auxiliary resources used my mixer */ + struct mxr_resources res; +}; + +/** transform device structure into mixer device */ +static inline struct mxr_device *to_mdev(struct device *dev) +{ + struct v4l2_device *vdev = dev_get_drvdata(dev); + return container_of(vdev, struct mxr_device, v4l2_dev); +} + +/** get current output data, should be called under mdev's mutex */ +static inline struct mxr_output *to_output(struct mxr_device *mdev) +{ + return mdev->output[mdev->current_output]; +} + +/** get current output subdev, should be called under mdev's mutex */ +static inline struct v4l2_subdev *to_outsd(struct mxr_device *mdev) +{ + struct mxr_output *out = to_output(mdev); + return out ? out->sd : NULL; +} + +/** forward declaration for mixer platform data */ +struct mxr_platform_data; + +/** acquiring common video resources */ +int __devinit mxr_acquire_video(struct mxr_device *mdev, + struct mxr_output_conf *output_cont, int output_count); + +/** releasing common video resources */ +void __devexit mxr_release_video(struct mxr_device *mdev); + +struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx); +struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx); +struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev, + int idx, char *name, struct mxr_layer_ops *ops); + +void mxr_base_layer_release(struct mxr_layer *layer); +void mxr_layer_release(struct mxr_layer *layer); + +int mxr_base_layer_register(struct mxr_layer *layer); +void mxr_base_layer_unregister(struct mxr_layer *layer); + +unsigned long mxr_get_plane_size(const struct mxr_block *blk, + unsigned int width, unsigned int height); + +/** adds new consumer for mixer's power */ +int __must_check mxr_power_get(struct mxr_device *mdev); +/** removes consumer for mixer's power */ +void mxr_power_put(struct mxr_device *mdev); +/** add new client for output configuration */ +void mxr_output_get(struct mxr_device *mdev); +/** removes new client for output configuration */ +void mxr_output_put(struct mxr_device *mdev); +/** add new client for streaming */ +void mxr_streamer_get(struct mxr_device *mdev); +/** removes new client for streaming */ +void mxr_streamer_put(struct mxr_device *mdev); +/** returns format of data delivared to current output */ +void mxr_get_mbus_fmt(struct mxr_device *mdev, + struct v4l2_mbus_framefmt *mbus_fmt); + +/* Debug */ + +#define mxr_err(mdev, fmt, ...) dev_err(mdev->dev, fmt, ##__VA_ARGS__) +#define mxr_warn(mdev, fmt, ...) dev_warn(mdev->dev, fmt, ##__VA_ARGS__) +#define mxr_info(mdev, fmt, ...) dev_info(mdev->dev, fmt, ##__VA_ARGS__) + +#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG + #define mxr_dbg(mdev, fmt, ...) dev_dbg(mdev->dev, fmt, ##__VA_ARGS__) +#else + #define mxr_dbg(mdev, fmt, ...) do { (void) mdev; } while (0) +#endif + +/* accessing Mixer's and Video Processor's registers */ + +void mxr_vsync_set_update(struct mxr_device *mdev, int en); +void mxr_reg_reset(struct mxr_device *mdev); +irqreturn_t mxr_irq_handler(int irq, void *dev_data); +void mxr_reg_s_output(struct mxr_device *mdev, int cookie); +void mxr_reg_streamon(struct mxr_device *mdev); +void mxr_reg_streamoff(struct mxr_device *mdev); +int mxr_reg_wait4vsync(struct mxr_device *mdev); +void mxr_reg_set_mbus_fmt(struct mxr_device *mdev, + struct v4l2_mbus_framefmt *fmt); +void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en); +void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr); +void mxr_reg_graph_format(struct mxr_device *mdev, int idx, + const struct mxr_format *fmt, const struct mxr_geometry *geo); + +void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en); +void mxr_reg_vp_buffer(struct mxr_device *mdev, + dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2]); +void mxr_reg_vp_format(struct mxr_device *mdev, + const struct mxr_format *fmt, const struct mxr_geometry *geo); +void mxr_reg_dump(struct mxr_device *mdev); + +#endif /* SAMSUNG_MIXER_H */ + diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/video/s5p-tv/mixer_drv.c new file mode 100644 index 0000000..0064309 --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer_drv.c @@ -0,0 +1,487 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#include "mixer.h" + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/clk.h> + +MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung MIXER"); +MODULE_LICENSE("GPL"); + +/* --------- DRIVER PARAMETERS ---------- */ + +static struct mxr_output_conf mxr_output_conf[] = { + { + .output_name = "S5P HDMI connector", + .module_name = "s5p-hdmi", + .cookie = 1, + }, + { + .output_name = "S5P SDO connector", + .module_name = "s5p-sdo", + .cookie = 0, + }, +}; + +void mxr_get_mbus_fmt(struct mxr_device *mdev, + struct v4l2_mbus_framefmt *mbus_fmt) +{ + struct v4l2_subdev *sd; + int ret; + + mutex_lock(&mdev->mutex); + sd = to_outsd(mdev); + ret = v4l2_subdev_call(sd, video, g_mbus_fmt, mbus_fmt); + WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name); + mutex_unlock(&mdev->mutex); +} + +void mxr_streamer_get(struct mxr_device *mdev) +{ + mutex_lock(&mdev->mutex); + ++mdev->n_streamer; + mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer); + if (mdev->n_streamer == 1) { + struct v4l2_subdev *sd = to_outsd(mdev); + struct v4l2_mbus_framefmt mbus_fmt; + struct mxr_resources *res = &mdev->res; + int ret; + + if (to_output(mdev)->cookie == 0) + clk_set_parent(res->sclk_mixer, res->sclk_dac); + else + clk_set_parent(res->sclk_mixer, res->sclk_hdmi); + mxr_reg_s_output(mdev, to_output(mdev)->cookie); + + ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mbus_fmt); + WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name); + ret = v4l2_subdev_call(sd, video, s_stream, 1); + WARN(ret, "starting stream failed for output %s\n", sd->name); + + mxr_reg_set_mbus_fmt(mdev, &mbus_fmt); + mxr_reg_streamon(mdev); + ret = mxr_reg_wait4vsync(mdev); + WARN(ret, "failed to get vsync (%d) from output\n", ret); + } + mutex_unlock(&mdev->mutex); + mxr_reg_dump(mdev); + /* FIXME: what to do when streaming fails? */ +} + +void mxr_streamer_put(struct mxr_device *mdev) +{ + mutex_lock(&mdev->mutex); + --mdev->n_streamer; + mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer); + if (mdev->n_streamer == 0) { + int ret; + struct v4l2_subdev *sd = to_outsd(mdev); + + mxr_reg_streamoff(mdev); + /* vsync applies Mixer setup */ + ret = mxr_reg_wait4vsync(mdev); + WARN(ret, "failed to get vsync (%d) from output\n", ret); + ret = v4l2_subdev_call(sd, video, s_stream, 0); + WARN(ret, "stopping stream failed for output %s\n", sd->name); + } + WARN(mdev->n_streamer < 0, "negative number of streamers (%d)\n", + mdev->n_streamer); + mutex_unlock(&mdev->mutex); + mxr_reg_dump(mdev); +} + +void mxr_output_get(struct mxr_device *mdev) +{ + mutex_lock(&mdev->mutex); + ++mdev->n_output; + mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output); + /* turn on auxiliary driver */ + if (mdev->n_output == 1) + v4l2_subdev_call(to_outsd(mdev), core, s_power, 1); + mutex_unlock(&mdev->mutex); +} + +void mxr_output_put(struct mxr_device *mdev) +{ + mutex_lock(&mdev->mutex); + --mdev->n_output; + mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output); + /* turn on auxiliary driver */ + if (mdev->n_output == 0) + v4l2_subdev_call(to_outsd(mdev), core, s_power, 0); + WARN(mdev->n_output < 0, "negative number of output users (%d)\n", + mdev->n_output); + mutex_unlock(&mdev->mutex); +} + +int mxr_power_get(struct mxr_device *mdev) +{ + int ret = pm_runtime_get_sync(mdev->dev); + + /* returning 1 means that power is already enabled, + * so zero success be returned */ + if (IS_ERR_VALUE(ret)) + return ret; + return 0; +} + +void mxr_power_put(struct mxr_device *mdev) +{ + pm_runtime_put_sync(mdev->dev); +} + +/* --------- RESOURCE MANAGEMENT -------------*/ + +static int __devinit mxr_acquire_plat_resources(struct mxr_device *mdev, + struct platform_device *pdev) +{ + struct resource *res; + int ret; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mxr"); + if (res == NULL) { + mxr_err(mdev, "get memory resource failed.\n"); + ret = -ENXIO; + goto fail; + } + + mdev->res.mxr_regs = ioremap(res->start, resource_size(res)); + if (mdev->res.mxr_regs == NULL) { + mxr_err(mdev, "register mapping failed.\n"); + ret = -ENXIO; + goto fail; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vp"); + if (res == NULL) { + mxr_err(mdev, "get memory resource failed.\n"); + ret = -ENXIO; + goto fail_mxr_regs; + } + + mdev->res.vp_regs = ioremap(res->start, resource_size(res)); + if (mdev->res.vp_regs == NULL) { + mxr_err(mdev, "register mapping failed.\n"); + ret = -ENXIO; + goto fail_mxr_regs; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "irq"); + if (res == NULL) { + mxr_err(mdev, "get interrupt resource failed.\n"); + ret = -ENXIO; + goto fail_vp_regs; + } + + ret = request_irq(res->start, mxr_irq_handler, 0, "s5p-mixer", mdev); + if (ret) { + mxr_err(mdev, "request interrupt failed.\n"); + goto fail_vp_regs; + } + mdev->res.irq = res->start; + + return 0; + +fail_vp_regs: + iounmap(mdev->res.vp_regs); + +fail_mxr_regs: + iounmap(mdev->res.mxr_regs); + +fail: + return ret; +} + +static void mxr_release_plat_resources(struct mxr_device *mdev) +{ + free_irq(mdev->res.irq, mdev); + iounmap(mdev->res.vp_regs); + iounmap(mdev->res.mxr_regs); +} + +static void mxr_release_clocks(struct mxr_device *mdev) +{ + struct mxr_resources *res = &mdev->res; + + if (!IS_ERR_OR_NULL(res->sclk_dac)) + clk_put(res->sclk_dac); + if (!IS_ERR_OR_NULL(res->sclk_hdmi)) + clk_put(res->sclk_hdmi); + if (!IS_ERR_OR_NULL(res->sclk_mixer)) + clk_put(res->sclk_mixer); + if (!IS_ERR_OR_NULL(res->vp)) + clk_put(res->vp); + if (!IS_ERR_OR_NULL(res->mixer)) + clk_put(res->mixer); +} + +static int mxr_acquire_clocks(struct mxr_device *mdev) +{ + struct mxr_resources *res = &mdev->res; + struct device *dev = mdev->dev; + + res->mixer = clk_get(dev, "mixer"); + if (IS_ERR_OR_NULL(res->mixer)) { + mxr_err(mdev, "failed to get clock 'mixer'\n"); + goto fail; + } + res->vp = clk_get(dev, "vp"); + if (IS_ERR_OR_NULL(res->vp)) { + mxr_err(mdev, "failed to get clock 'vp'\n"); + goto fail; + } + res->sclk_mixer = clk_get(dev, "sclk_mixer"); + if (IS_ERR_OR_NULL(res->sclk_mixer)) { + mxr_err(mdev, "failed to get clock 'sclk_mixer'\n"); + goto fail; + } + res->sclk_hdmi = clk_get(dev, "sclk_hdmi"); + if (IS_ERR_OR_NULL(res->sclk_hdmi)) { + mxr_err(mdev, "failed to get clock 'sclk_hdmi'\n"); + goto fail; + } + res->sclk_dac = clk_get(dev, "sclk_dac"); + if (IS_ERR_OR_NULL(res->sclk_dac)) { + mxr_err(mdev, "failed to get clock 'sclk_dac'\n"); + goto fail; + } + + return 0; +fail: + mxr_release_clocks(mdev); + return -ENODEV; +} + +static int __devinit mxr_acquire_resources(struct mxr_device *mdev, + struct platform_device *pdev) +{ + int ret; + ret = mxr_acquire_plat_resources(mdev, pdev); + + if (ret) + goto fail; + + ret = mxr_acquire_clocks(mdev); + if (ret) + goto fail_plat; + + mxr_info(mdev, "resources acquired\n"); + return 0; + +fail_plat: + mxr_release_plat_resources(mdev); +fail: + mxr_err(mdev, "resources acquire failed\n"); + return ret; +} + +static void mxr_release_resources(struct mxr_device *mdev) +{ + mxr_release_clocks(mdev); + mxr_release_plat_resources(mdev); + memset(&mdev->res, 0, sizeof mdev->res); +} + +static void mxr_release_layers(struct mxr_device *mdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(mdev->layer); ++i) + if (mdev->layer[i]) + mxr_layer_release(mdev->layer[i]); +} + +static int __devinit mxr_acquire_layers(struct mxr_device *mdev, + struct mxr_platform_data *pdata) +{ + mdev->layer[0] = mxr_graph_layer_create(mdev, 0); + mdev->layer[1] = mxr_graph_layer_create(mdev, 1); + mdev->layer[2] = mxr_vp_layer_create(mdev, 0); + + if (!mdev->layer[0] || !mdev->layer[1] || !mdev->layer[2]) { + mxr_err(mdev, "failed to acquire layers\n"); + goto fail; + } + + return 0; + +fail: + mxr_release_layers(mdev); + return -ENODEV; +} + +/* ---------- POWER MANAGEMENT ----------- */ + +static int mxr_runtime_resume(struct device *dev) +{ + struct mxr_device *mdev = to_mdev(dev); + struct mxr_resources *res = &mdev->res; + + mxr_dbg(mdev, "resume - start\n"); + mutex_lock(&mdev->mutex); + /* turn clocks on */ + clk_enable(res->mixer); + clk_enable(res->vp); + clk_enable(res->sclk_mixer); + /* apply default configuration */ + mxr_reg_reset(mdev); + mxr_dbg(mdev, "resume - finished\n"); + + mutex_unlock(&mdev->mutex); + return 0; +} + +static int mxr_runtime_suspend(struct device *dev) +{ + struct mxr_device *mdev = to_mdev(dev); + struct mxr_resources *res = &mdev->res; + mxr_dbg(mdev, "suspend - start\n"); + mutex_lock(&mdev->mutex); + /* turn clocks off */ + clk_disable(res->sclk_mixer); + clk_disable(res->vp); + clk_disable(res->mixer); + mutex_unlock(&mdev->mutex); + mxr_dbg(mdev, "suspend - finished\n"); + return 0; +} + +static const struct dev_pm_ops mxr_pm_ops = { + .runtime_suspend = mxr_runtime_suspend, + .runtime_resume = mxr_runtime_resume, +}; + +/* --------- DRIVER INITIALIZATION ---------- */ + +static int __devinit mxr_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxr_platform_data *pdata = dev->platform_data; + struct mxr_device *mdev; + int ret; + + /* mdev does not exist yet so no mxr_dbg is used */ + dev_info(dev, "probe start\n"); + + mdev = kzalloc(sizeof *mdev, GFP_KERNEL); + if (!mdev) { + mxr_err(mdev, "not enough memory.\n"); + ret = -ENOMEM; + goto fail; + } + + /* setup pointer to master device */ + mdev->dev = dev; + + mutex_init(&mdev->mutex); + spin_lock_init(&mdev->reg_slock); + init_waitqueue_head(&mdev->event_queue); + + /* acquire resources: regs, irqs, clocks, regulators */ + ret = mxr_acquire_resources(mdev, pdev); + if (ret) + goto fail_mem; + + /* configure resources for video output */ + ret = mxr_acquire_video(mdev, mxr_output_conf, + ARRAY_SIZE(mxr_output_conf)); + if (ret) + goto fail_resources; + + /* configure layers */ + ret = mxr_acquire_layers(mdev, pdata); + if (ret) + goto fail_video; + + pm_runtime_enable(dev); + + mxr_info(mdev, "probe successful\n"); + return 0; + +fail_video: + mxr_release_video(mdev); + +fail_resources: + mxr_release_resources(mdev); + +fail_mem: + kfree(mdev); + +fail: + dev_info(dev, "probe failed\n"); + return ret; +} + +static int __devexit mxr_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxr_device *mdev = to_mdev(dev); + + pm_runtime_disable(dev); + + mxr_release_layers(mdev); + mxr_release_video(mdev); + mxr_release_resources(mdev); + + kfree(mdev); + + dev_info(dev, "remove sucessful\n"); + return 0; +} + +static struct platform_driver mxr_driver __refdata = { + .probe = mxr_probe, + .remove = __devexit_p(mxr_remove), + .driver = { + .name = MXR_DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &mxr_pm_ops, + } +}; + +static int __init mxr_init(void) +{ + int i, ret; + static const char banner[] __initdata = KERN_INFO + "Samsung TV Mixer driver, " + "(c) 2010-2011 Samsung Electronics Co., Ltd.\n"; + printk(banner); + + /* Loading auxiliary modules */ + for (i = 0; i < ARRAY_SIZE(mxr_output_conf); ++i) + request_module(mxr_output_conf[i].module_name); + + ret = platform_driver_register(&mxr_driver); + if (ret != 0) { + printk(KERN_ERR "registration of MIXER driver failed\n"); + return -ENXIO; + } + + return 0; +} +module_init(mxr_init); + +static void __exit mxr_exit(void) +{ + platform_driver_unregister(&mxr_driver); +} +module_exit(mxr_exit); diff --git a/drivers/media/video/s5p-tv/mixer_grp_layer.c b/drivers/media/video/s5p-tv/mixer_grp_layer.c new file mode 100644 index 0000000..58f0ba4 --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer_grp_layer.c @@ -0,0 +1,185 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#include "mixer.h" + +#include <media/videobuf2-dma-contig.h> + +/* FORMAT DEFINITIONS */ + +static const struct mxr_format mxr_fb_fmt_rgb565 = { + .name = "RGB565", + .fourcc = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .num_planes = 1, + .plane = { + { .width = 1, .height = 1, .size = 2 }, + }, + .num_subframes = 1, + .cookie = 4, +}; + +static const struct mxr_format mxr_fb_fmt_argb1555 = { + .name = "ARGB1555", + .num_planes = 1, + .fourcc = V4L2_PIX_FMT_RGB555, + .colorspace = V4L2_COLORSPACE_SRGB, + .plane = { + { .width = 1, .height = 1, .size = 2 }, + }, + .num_subframes = 1, + .cookie = 5, +}; + +static const struct mxr_format mxr_fb_fmt_argb4444 = { + .name = "ARGB4444", + .num_planes = 1, + .fourcc = V4L2_PIX_FMT_RGB444, + .colorspace = V4L2_COLORSPACE_SRGB, + .plane = { + { .width = 1, .height = 1, .size = 2 }, + }, + .num_subframes = 1, + .cookie = 6, +}; + +static const struct mxr_format mxr_fb_fmt_argb8888 = { + .name = "ARGB8888", + .fourcc = V4L2_PIX_FMT_BGR32, + .colorspace = V4L2_COLORSPACE_SRGB, + .num_planes = 1, + .plane = { + { .width = 1, .height = 1, .size = 4 }, + }, + .num_subframes = 1, + .cookie = 7, +}; + +static const struct mxr_format *mxr_graph_format[] = { + &mxr_fb_fmt_rgb565, + &mxr_fb_fmt_argb1555, + &mxr_fb_fmt_argb4444, + &mxr_fb_fmt_argb8888, +}; + +/* AUXILIARY CALLBACKS */ + +static void mxr_graph_layer_release(struct mxr_layer *layer) +{ + mxr_base_layer_unregister(layer); + mxr_base_layer_release(layer); +} + +static void mxr_graph_buffer_set(struct mxr_layer *layer, + struct mxr_buffer *buf) +{ + dma_addr_t addr = 0; + + if (buf) + addr = vb2_dma_contig_plane_paddr(&buf->vb, 0); + mxr_reg_graph_buffer(layer->mdev, layer->idx, addr); +} + +static void mxr_graph_stream_set(struct mxr_layer *layer, int en) +{ + mxr_reg_graph_layer_stream(layer->mdev, layer->idx, en); +} + +static void mxr_graph_format_set(struct mxr_layer *layer) +{ + mxr_reg_graph_format(layer->mdev, layer->idx, + layer->fmt, &layer->geo); +} + +static void mxr_graph_fix_geometry(struct mxr_layer *layer) +{ + struct mxr_geometry *geo = &layer->geo; + + /* limit to boundary size */ + geo->src.full_width = clamp_val(geo->src.full_width, 1, 32767); + geo->src.full_height = clamp_val(geo->src.full_height, 1, 2047); + geo->src.width = clamp_val(geo->src.width, 1, geo->src.full_width); + geo->src.width = min(geo->src.width, 2047U); + /* not possible to crop of Y axis */ + geo->src.y_offset = min(geo->src.y_offset, geo->src.full_height - 1); + geo->src.height = geo->src.full_height - geo->src.y_offset; + /* limitting offset */ + geo->src.x_offset = min(geo->src.x_offset, + geo->src.full_width - geo->src.width); + + /* setting position in output */ + geo->dst.width = min(geo->dst.width, geo->dst.full_width); + geo->dst.height = min(geo->dst.height, geo->dst.full_height); + + /* Mixer supports only 1x and 2x scaling */ + if (geo->dst.width >= 2 * geo->src.width) { + geo->x_ratio = 1; + geo->dst.width = 2 * geo->src.width; + } else { + geo->x_ratio = 0; + geo->dst.width = geo->src.width; + } + + if (geo->dst.height >= 2 * geo->src.height) { + geo->y_ratio = 1; + geo->dst.height = 2 * geo->src.height; + } else { + geo->y_ratio = 0; + geo->dst.height = geo->src.height; + } + + geo->dst.x_offset = min(geo->dst.x_offset, + geo->dst.full_width - geo->dst.width); + geo->dst.y_offset = min(geo->dst.y_offset, + geo->dst.full_height - geo->dst.height); +} + +/* PUBLIC API */ + +struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx) +{ + struct mxr_layer *layer; + int ret; + struct mxr_layer_ops ops = { + .release = mxr_graph_layer_release, + .buffer_set = mxr_graph_buffer_set, + .stream_set = mxr_graph_stream_set, + .format_set = mxr_graph_format_set, + .fix_geometry = mxr_graph_fix_geometry, + }; + char name[32]; + + sprintf(name, "graph%d", idx); + + layer = mxr_base_layer_create(mdev, idx, name, &ops); + if (layer == NULL) { + mxr_err(mdev, "failed to initialize layer(%d) base\n", idx); + goto fail; + } + + layer->fmt_array = mxr_graph_format; + layer->fmt_array_size = ARRAY_SIZE(mxr_graph_format); + + ret = mxr_base_layer_register(layer); + if (ret) + goto fail_layer; + + return layer; + +fail_layer: + mxr_base_layer_release(layer); + +fail: + return NULL; +} + diff --git a/drivers/media/video/s5p-tv/mixer_reg.c b/drivers/media/video/s5p-tv/mixer_reg.c new file mode 100644 index 0000000..38dac67 --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer_reg.c @@ -0,0 +1,541 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#include "mixer.h" +#include "regs-mixer.h" +#include "regs-vp.h" + +#include <linux/delay.h> + +/* Register access subroutines */ + +static inline u32 vp_read(struct mxr_device *mdev, u32 reg_id) +{ + return readl(mdev->res.vp_regs + reg_id); +} + +static inline void vp_write(struct mxr_device *mdev, u32 reg_id, u32 val) +{ + writel(val, mdev->res.vp_regs + reg_id); +} + +static inline void vp_write_mask(struct mxr_device *mdev, u32 reg_id, + u32 val, u32 mask) +{ + u32 old = vp_read(mdev, reg_id); + + val = (val & mask) | (old & ~mask); + writel(val, mdev->res.vp_regs + reg_id); +} + +static inline u32 mxr_read(struct mxr_device *mdev, u32 reg_id) +{ + return readl(mdev->res.mxr_regs + reg_id); +} + +static inline void mxr_write(struct mxr_device *mdev, u32 reg_id, u32 val) +{ + writel(val, mdev->res.mxr_regs + reg_id); +} + +static inline void mxr_write_mask(struct mxr_device *mdev, u32 reg_id, + u32 val, u32 mask) +{ + u32 old = mxr_read(mdev, reg_id); + + val = (val & mask) | (old & ~mask); + writel(val, mdev->res.mxr_regs + reg_id); +} + +void mxr_vsync_set_update(struct mxr_device *mdev, int en) +{ + /* block update on vsync */ + mxr_write_mask(mdev, MXR_STATUS, en ? MXR_STATUS_SYNC_ENABLE : 0, + MXR_STATUS_SYNC_ENABLE); + vp_write(mdev, VP_SHADOW_UPDATE, en ? VP_SHADOW_UPDATE_ENABLE : 0); +} + +static void __mxr_reg_vp_reset(struct mxr_device *mdev) +{ + int tries = 100; + + vp_write(mdev, VP_SRESET, VP_SRESET_PROCESSING); + for (tries = 100; tries; --tries) { + /* waiting until VP_SRESET_PROCESSING is 0 */ + if (~vp_read(mdev, VP_SRESET) & VP_SRESET_PROCESSING) + break; + mdelay(10); + } + WARN(tries == 0, "failed to reset Video Processor\n"); +} + +static void mxr_reg_vp_default_filter(struct mxr_device *mdev); + +void mxr_reg_reset(struct mxr_device *mdev) +{ + unsigned long flags; + u32 val; /* value stored to register */ + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + /* set output in RGB888 mode */ + mxr_write(mdev, MXR_CFG, MXR_CFG_OUT_YUV444); + + /* 16 beat burst in DMA */ + mxr_write_mask(mdev, MXR_STATUS, MXR_STATUS_16_BURST, + MXR_STATUS_BURST_MASK); + + /* setting default layer priority: layer1 > video > layer0 + * because typical usage scenario would be + * layer0 - framebuffer + * video - video overlay + * layer1 - OSD + */ + val = MXR_LAYER_CFG_GRP0_VAL(1); + val |= MXR_LAYER_CFG_VP_VAL(2); + val |= MXR_LAYER_CFG_GRP1_VAL(3); + mxr_write(mdev, MXR_LAYER_CFG, val); + + /* use dark gray background color */ + mxr_write(mdev, MXR_BG_COLOR0, 0x808080); + mxr_write(mdev, MXR_BG_COLOR1, 0x808080); + mxr_write(mdev, MXR_BG_COLOR2, 0x808080); + + /* setting graphical layers */ + + val = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */ + val |= MXR_GRP_CFG_BLEND_PRE_MUL; /* premul mode */ + val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */ + + /* the same configuration for both layers */ + mxr_write(mdev, MXR_GRAPHIC_CFG(0), val); + mxr_write(mdev, MXR_GRAPHIC_CFG(1), val); + + /* configuration of Video Processor Registers */ + __mxr_reg_vp_reset(mdev); + mxr_reg_vp_default_filter(mdev); + + /* enable all interrupts */ + mxr_write_mask(mdev, MXR_INT_EN, ~0, MXR_INT_EN_ALL); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +void mxr_reg_graph_format(struct mxr_device *mdev, int idx, + const struct mxr_format *fmt, const struct mxr_geometry *geo) +{ + u32 val; + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + /* setup format */ + mxr_write_mask(mdev, MXR_GRAPHIC_CFG(idx), + MXR_GRP_CFG_FORMAT_VAL(fmt->cookie), MXR_GRP_CFG_FORMAT_MASK); + + /* setup geometry */ + mxr_write(mdev, MXR_GRAPHIC_SPAN(idx), geo->src.full_width); + val = MXR_GRP_WH_WIDTH(geo->src.width); + val |= MXR_GRP_WH_HEIGHT(geo->src.height); + val |= MXR_GRP_WH_H_SCALE(geo->x_ratio); + val |= MXR_GRP_WH_V_SCALE(geo->y_ratio); + mxr_write(mdev, MXR_GRAPHIC_WH(idx), val); + + /* setup offsets in source image */ + val = MXR_GRP_SXY_SX(geo->src.x_offset); + val |= MXR_GRP_SXY_SY(geo->src.y_offset); + mxr_write(mdev, MXR_GRAPHIC_SXY(idx), val); + + /* setup offsets in display image */ + val = MXR_GRP_DXY_DX(geo->dst.x_offset); + val |= MXR_GRP_DXY_DY(geo->dst.y_offset); + mxr_write(mdev, MXR_GRAPHIC_DXY(idx), val); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +void mxr_reg_vp_format(struct mxr_device *mdev, + const struct mxr_format *fmt, const struct mxr_geometry *geo) +{ + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + vp_write_mask(mdev, VP_MODE, fmt->cookie, VP_MODE_FMT_MASK); + + /* setting size of input image */ + vp_write(mdev, VP_IMG_SIZE_Y, VP_IMG_HSIZE(geo->src.full_width) | + VP_IMG_VSIZE(geo->src.full_height)); + /* chroma height has to reduced by 2 to avoid chroma distorions */ + vp_write(mdev, VP_IMG_SIZE_C, VP_IMG_HSIZE(geo->src.full_width) | + VP_IMG_VSIZE(geo->src.full_height / 2)); + + vp_write(mdev, VP_SRC_WIDTH, geo->src.width); + vp_write(mdev, VP_SRC_HEIGHT, geo->src.height); + vp_write(mdev, VP_SRC_H_POSITION, + VP_SRC_H_POSITION_VAL(geo->src.x_offset)); + vp_write(mdev, VP_SRC_V_POSITION, geo->src.y_offset); + + vp_write(mdev, VP_DST_WIDTH, geo->dst.width); + vp_write(mdev, VP_DST_H_POSITION, geo->dst.x_offset); + if (geo->dst.field == V4L2_FIELD_INTERLACED) { + vp_write(mdev, VP_DST_HEIGHT, geo->dst.height / 2); + vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset / 2); + } else { + vp_write(mdev, VP_DST_HEIGHT, geo->dst.height); + vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset); + } + + vp_write(mdev, VP_H_RATIO, geo->x_ratio); + vp_write(mdev, VP_V_RATIO, geo->y_ratio); + + vp_write(mdev, VP_ENDIAN_MODE, VP_ENDIAN_MODE_LITTLE); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); + +} + +void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr) +{ + u32 val = addr ? ~0 : 0; + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + if (idx == 0) + mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP0_ENABLE); + else + mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP1_ENABLE); + mxr_write(mdev, MXR_GRAPHIC_BASE(idx), addr); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +void mxr_reg_vp_buffer(struct mxr_device *mdev, + dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2]) +{ + u32 val = luma_addr[0] ? ~0 : 0; + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_VP_ENABLE); + vp_write_mask(mdev, VP_ENABLE, val, VP_ENABLE_ON); + /* TODO: fix tiled mode */ + vp_write(mdev, VP_TOP_Y_PTR, luma_addr[0]); + vp_write(mdev, VP_TOP_C_PTR, chroma_addr[0]); + vp_write(mdev, VP_BOT_Y_PTR, luma_addr[1]); + vp_write(mdev, VP_BOT_C_PTR, chroma_addr[1]); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +static void mxr_irq_layer_handle(struct mxr_layer *layer) +{ + struct list_head *head = &layer->enq_list; + struct mxr_buffer *done; + + /* skip non-existing layer */ + if (layer == NULL) + return; + + spin_lock(&layer->enq_slock); + if (layer->state == MXR_LAYER_IDLE) + goto done; + + done = layer->shadow_buf; + layer->shadow_buf = layer->update_buf; + + if (list_empty(head)) { + if (layer->state != MXR_LAYER_STREAMING) + layer->update_buf = NULL; + } else { + struct mxr_buffer *next; + next = list_first_entry(head, struct mxr_buffer, list); + list_del(&next->list); + layer->update_buf = next; + } + + layer->ops.buffer_set(layer, layer->update_buf); + + if (done && done != layer->shadow_buf) + vb2_buffer_done(&done->vb, VB2_BUF_STATE_DONE); + +done: + spin_unlock(&layer->enq_slock); +} + +irqreturn_t mxr_irq_handler(int irq, void *dev_data) +{ + struct mxr_device *mdev = dev_data; + u32 i, val; + + spin_lock(&mdev->reg_slock); + val = mxr_read(mdev, MXR_INT_STATUS); + + /* wake up process waiting for VSYNC */ + if (val & MXR_INT_STATUS_VSYNC) { + set_bit(MXR_EVENT_VSYNC, &mdev->event_flags); + wake_up(&mdev->event_queue); + } + + /* clear interrupts */ + if (~val & MXR_INT_EN_VSYNC) { + /* vsync interrupt use different bit for read and clear */ + val &= ~MXR_INT_EN_VSYNC; + val |= MXR_INT_CLEAR_VSYNC; + } + mxr_write(mdev, MXR_INT_STATUS, val); + + spin_unlock(&mdev->reg_slock); + /* leave on non-vsync event */ + if (~val & MXR_INT_CLEAR_VSYNC) + return IRQ_HANDLED; + for (i = 0; i < MXR_MAX_LAYERS; ++i) + mxr_irq_layer_handle(mdev->layer[i]); + return IRQ_HANDLED; +} + +void mxr_reg_s_output(struct mxr_device *mdev, int cookie) +{ + u32 val; + + val = cookie == 0 ? MXR_CFG_DST_SDO : MXR_CFG_DST_HDMI; + mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_DST_MASK); +} + +void mxr_reg_streamon(struct mxr_device *mdev) +{ + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + /* single write -> no need to block vsync update */ + + /* start MIXER */ + mxr_write_mask(mdev, MXR_STATUS, ~0, MXR_STATUS_REG_RUN); + + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +void mxr_reg_streamoff(struct mxr_device *mdev) +{ + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + /* single write -> no need to block vsync update */ + + /* stop MIXER */ + mxr_write_mask(mdev, MXR_STATUS, 0, MXR_STATUS_REG_RUN); + + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +int mxr_reg_wait4vsync(struct mxr_device *mdev) +{ + int ret; + + clear_bit(MXR_EVENT_VSYNC, &mdev->event_flags); + /* TODO: consider adding interruptible */ + ret = wait_event_timeout(mdev->event_queue, + test_bit(MXR_EVENT_VSYNC, &mdev->event_flags), + msecs_to_jiffies(1000)); + if (ret > 0) + return 0; + if (ret < 0) + return ret; + mxr_warn(mdev, "no vsync detected - timeout\n"); + return -ETIME; +} + +void mxr_reg_set_mbus_fmt(struct mxr_device *mdev, + struct v4l2_mbus_framefmt *fmt) +{ + u32 val = 0; + unsigned long flags; + + spin_lock_irqsave(&mdev->reg_slock, flags); + mxr_vsync_set_update(mdev, MXR_DISABLE); + + /* choosing between interlace and progressive mode */ + if (fmt->field == V4L2_FIELD_INTERLACED) + val |= MXR_CFG_SCAN_INTERLACE; + else + val |= MXR_CFG_SCAN_PROGRASSIVE; + + /* choosing between porper HD and SD mode */ + if (fmt->height == 480) + val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD; + else if (fmt->height == 576) + val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD; + else if (fmt->height == 720) + val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD; + else if (fmt->height == 1080) + val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD; + else + WARN(1, "unrecognized mbus height %u!\n", fmt->height); + + mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_SCAN_MASK); + + val = (fmt->field == V4L2_FIELD_INTERLACED) ? ~0 : 0; + vp_write_mask(mdev, VP_MODE, val, + VP_MODE_LINE_SKIP | VP_MODE_FIELD_ID_AUTO_TOGGLING); + + mxr_vsync_set_update(mdev, MXR_ENABLE); + spin_unlock_irqrestore(&mdev->reg_slock, flags); +} + +void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en) +{ + /* no extra actions need to be done */ +} + +void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en) +{ + /* no extra actions need to be done */ +} + +static const u8 filter_y_horiz_tap8[] = { + 0, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, -1, -1, 0, 0, 0, + 0, 2, 4, 5, 6, 6, 6, 6, + 6, 5, 5, 4, 3, 2, 1, 1, + 0, -6, -12, -16, -18, -20, -21, -20, + -20, -18, -16, -13, -10, -8, -5, -2, + 127, 126, 125, 121, 114, 107, 99, 89, + 79, 68, 57, 46, 35, 25, 16, 8, +}; + +static const u8 filter_y_vert_tap4[] = { + 0, -3, -6, -8, -8, -8, -8, -7, + -6, -5, -4, -3, -2, -1, -1, 0, + 127, 126, 124, 118, 111, 102, 92, 81, + 70, 59, 48, 37, 27, 19, 11, 5, + 0, 5, 11, 19, 27, 37, 48, 59, + 70, 81, 92, 102, 111, 118, 124, 126, + 0, 0, -1, -1, -2, -3, -4, -5, + -6, -7, -8, -8, -8, -8, -6, -3, +}; + +static const u8 filter_cr_horiz_tap4[] = { + 0, -3, -6, -8, -8, -8, -8, -7, + -6, -5, -4, -3, -2, -1, -1, 0, + 127, 126, 124, 118, 111, 102, 92, 81, + 70, 59, 48, 37, 27, 19, 11, 5, +}; + +static inline void mxr_reg_vp_filter_set(struct mxr_device *mdev, + int reg_id, const u8 *data, unsigned int size) +{ + /* assure 4-byte align */ + BUG_ON(size & 3); + for (; size; size -= 4, reg_id += 4, data += 4) { + u32 val = (data[0] << 24) | (data[1] << 16) | + (data[2] << 8) | data[3]; + vp_write(mdev, reg_id, val); + } +} + +static void mxr_reg_vp_default_filter(struct mxr_device *mdev) +{ + mxr_reg_vp_filter_set(mdev, VP_POLY8_Y0_LL, + filter_y_horiz_tap8, sizeof filter_y_horiz_tap8); + mxr_reg_vp_filter_set(mdev, VP_POLY4_Y0_LL, + filter_y_vert_tap4, sizeof filter_y_vert_tap4); + mxr_reg_vp_filter_set(mdev, VP_POLY4_C0_LL, + filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4); +} + +static void mxr_reg_mxr_dump(struct mxr_device *mdev) +{ +#define DUMPREG(reg_id) \ +do { \ + mxr_dbg(mdev, #reg_id " = %08x\n", \ + (u32)readl(mdev->res.mxr_regs + reg_id)); \ +} while (0) + + DUMPREG(MXR_STATUS); + DUMPREG(MXR_CFG); + DUMPREG(MXR_INT_EN); + DUMPREG(MXR_INT_STATUS); + + DUMPREG(MXR_LAYER_CFG); + DUMPREG(MXR_VIDEO_CFG); + + DUMPREG(MXR_GRAPHIC0_CFG); + DUMPREG(MXR_GRAPHIC0_BASE); + DUMPREG(MXR_GRAPHIC0_SPAN); + DUMPREG(MXR_GRAPHIC0_WH); + DUMPREG(MXR_GRAPHIC0_SXY); + DUMPREG(MXR_GRAPHIC0_DXY); + + DUMPREG(MXR_GRAPHIC1_CFG); + DUMPREG(MXR_GRAPHIC1_BASE); + DUMPREG(MXR_GRAPHIC1_SPAN); + DUMPREG(MXR_GRAPHIC1_WH); + DUMPREG(MXR_GRAPHIC1_SXY); + DUMPREG(MXR_GRAPHIC1_DXY); +#undef DUMPREG +} + +static void mxr_reg_vp_dump(struct mxr_device *mdev) +{ +#define DUMPREG(reg_id) \ +do { \ + mxr_dbg(mdev, #reg_id " = %08x\n", \ + (u32) readl(mdev->res.vp_regs + reg_id)); \ +} while (0) + + + DUMPREG(VP_ENABLE); + DUMPREG(VP_SRESET); + DUMPREG(VP_SHADOW_UPDATE); + DUMPREG(VP_FIELD_ID); + DUMPREG(VP_MODE); + DUMPREG(VP_IMG_SIZE_Y); + DUMPREG(VP_IMG_SIZE_C); + DUMPREG(VP_PER_RATE_CTRL); + DUMPREG(VP_TOP_Y_PTR); + DUMPREG(VP_BOT_Y_PTR); + DUMPREG(VP_TOP_C_PTR); + DUMPREG(VP_BOT_C_PTR); + DUMPREG(VP_ENDIAN_MODE); + DUMPREG(VP_SRC_H_POSITION); + DUMPREG(VP_SRC_V_POSITION); + DUMPREG(VP_SRC_WIDTH); + DUMPREG(VP_SRC_HEIGHT); + DUMPREG(VP_DST_H_POSITION); + DUMPREG(VP_DST_V_POSITION); + DUMPREG(VP_DST_WIDTH); + DUMPREG(VP_DST_HEIGHT); + DUMPREG(VP_H_RATIO); + DUMPREG(VP_V_RATIO); + +#undef DUMPREG +} + +void mxr_reg_dump(struct mxr_device *mdev) +{ + mxr_reg_mxr_dump(mdev); + mxr_reg_vp_dump(mdev); +} + diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c new file mode 100644 index 0000000..43ac22f --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer_video.c @@ -0,0 +1,1006 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundation. either version 2 of the License, + * or (at your option) any later version + */ + +#include "mixer.h" + +#include <media/v4l2-ioctl.h> +#include <linux/videodev2.h> +#include <linux/mm.h> +#include <linux/version.h> +#include <linux/timer.h> +#include <media/videobuf2-dma-contig.h> + +static int find_reg_callback(struct device *dev, void *p) +{ + struct v4l2_subdev **sd = p; + + *sd = dev_get_drvdata(dev); + /* non-zero value stops iteration */ + return 1; +} + +static struct v4l2_subdev *find_and_register_subdev( + struct mxr_device *mdev, char *module_name) +{ + struct device_driver *drv; + struct v4l2_subdev *sd = NULL; + int ret; + + /* TODO: add waiting until probe is finished */ + drv = driver_find(module_name, &platform_bus_type); + if (!drv) { + mxr_warn(mdev, "module %s is missing\n", module_name); + return NULL; + } + /* driver refcnt is increased, it is safe to iterate over devices */ + ret = driver_for_each_device(drv, NULL, &sd, find_reg_callback); + /* ret == 0 means that find_reg_callback was never executed */ + if (sd == NULL) { + mxr_warn(mdev, "module %s provides no subdev!\n", module_name); + goto done; + } + /* v4l2_device_register_subdev detects if sd is NULL */ + ret = v4l2_device_register_subdev(&mdev->v4l2_dev, sd); + if (ret) { + mxr_warn(mdev, "failed to register subdev %s\n", sd->name); + sd = NULL; + } + +done: + put_driver(drv); + return sd; +} + +int __devinit mxr_acquire_video(struct mxr_device *mdev, + struct mxr_output_conf *output_conf, int output_count) +{ + struct device *dev = mdev->dev; + struct v4l2_device *v4l2_dev = &mdev->v4l2_dev; + int i; + int ret = 0; + struct v4l2_subdev *sd; + + strlcpy(v4l2_dev->name, dev_name(mdev->dev), sizeof(v4l2_dev->name)); + /* prepare context for V4L2 device */ + ret = v4l2_device_register(dev, v4l2_dev); + if (ret) { + mxr_err(mdev, "could not register v4l2 device.\n"); + goto fail; + } + + mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev); + if (IS_ERR_OR_NULL(mdev->alloc_ctx)) { + mxr_err(mdev, "could not acquire vb2 allocator\n"); + goto fail_v4l2_dev; + } + + /* registering outputs */ + mdev->output_cnt = 0; + for (i = 0; i < output_count; ++i) { + struct mxr_output_conf *conf = &output_conf[i]; + struct mxr_output *out; + + sd = find_and_register_subdev(mdev, conf->module_name); + /* trying to register next output */ + if (sd == NULL) + continue; + out = kzalloc(sizeof *out, GFP_KERNEL); + if (out == NULL) { + mxr_err(mdev, "no memory for '%s'\n", + conf->output_name); + ret = -ENOMEM; + /* registered subdevs are removed in fail_v4l2_dev */ + goto fail_output; + } + strlcpy(out->name, conf->output_name, sizeof(out->name)); + out->sd = sd; + out->cookie = conf->cookie; + mdev->output[mdev->output_cnt++] = out; + mxr_info(mdev, "added output '%s' from module '%s'\n", + conf->output_name, conf->module_name); + /* checking if maximal number of outputs is reached */ + if (mdev->output_cnt >= MXR_MAX_OUTPUTS) + break; + } + + if (mdev->output_cnt == 0) { + mxr_err(mdev, "failed to register any output\n"); + ret = -ENODEV; + /* skipping fail_output because there is nothing to free */ + goto fail_vb2_allocator; + } + + return 0; + +fail_output: + /* kfree is NULL-safe */ + for (i = 0; i < mdev->output_cnt; ++i) + kfree(mdev->output[i]); + memset(mdev->output, 0, sizeof mdev->output); + +fail_vb2_allocator: + /* freeing allocator context */ + vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx); + +fail_v4l2_dev: + /* NOTE: automatically unregister all subdevs */ + v4l2_device_unregister(v4l2_dev); + +fail: + return ret; +} + +void __devexit mxr_release_video(struct mxr_device *mdev) +{ + int i; + + /* kfree is NULL-safe */ + for (i = 0; i < mdev->output_cnt; ++i) + kfree(mdev->output[i]); + + vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx); + v4l2_device_unregister(&mdev->v4l2_dev); +} + +static int mxr_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + + strlcpy(cap->driver, MXR_DRIVER_NAME, sizeof cap->driver); + strlcpy(cap->card, layer->vfd.name, sizeof cap->card); + sprintf(cap->bus_info, "%d", layer->idx); + cap->version = KERNEL_VERSION(0, 1, 0); + cap->capabilities = V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + + return 0; +} + +/* Geometry handling */ +static void mxr_layer_geo_fix(struct mxr_layer *layer) +{ + struct mxr_device *mdev = layer->mdev; + struct v4l2_mbus_framefmt mbus_fmt; + + /* TODO: add some dirty flag to avoid unnecessary adjustments */ + mxr_get_mbus_fmt(mdev, &mbus_fmt); + layer->geo.dst.full_width = mbus_fmt.width; + layer->geo.dst.full_height = mbus_fmt.height; + layer->geo.dst.field = mbus_fmt.field; + layer->ops.fix_geometry(layer); +} + +static void mxr_layer_default_geo(struct mxr_layer *layer) +{ + struct mxr_device *mdev = layer->mdev; + struct v4l2_mbus_framefmt mbus_fmt; + + memset(&layer->geo, 0, sizeof layer->geo); + + mxr_get_mbus_fmt(mdev, &mbus_fmt); + + layer->geo.dst.full_width = mbus_fmt.width; + layer->geo.dst.full_height = mbus_fmt.height; + layer->geo.dst.width = layer->geo.dst.full_width; + layer->geo.dst.height = layer->geo.dst.full_height; + layer->geo.dst.field = mbus_fmt.field; + + layer->geo.src.full_width = mbus_fmt.width; + layer->geo.src.full_height = mbus_fmt.height; + layer->geo.src.width = layer->geo.src.full_width; + layer->geo.src.height = layer->geo.src.full_height; + + layer->ops.fix_geometry(layer); +} + +static void mxr_geometry_dump(struct mxr_device *mdev, struct mxr_geometry *geo) +{ + mxr_dbg(mdev, "src.full_size = (%u, %u)\n", + geo->src.full_width, geo->src.full_height); + mxr_dbg(mdev, "src.size = (%u, %u)\n", + geo->src.width, geo->src.height); + mxr_dbg(mdev, "src.offset = (%u, %u)\n", + geo->src.x_offset, geo->src.y_offset); + mxr_dbg(mdev, "dst.full_size = (%u, %u)\n", + geo->dst.full_width, geo->dst.full_height); + mxr_dbg(mdev, "dst.size = (%u, %u)\n", + geo->dst.width, geo->dst.height); + mxr_dbg(mdev, "dst.offset = (%u, %u)\n", + geo->dst.x_offset, geo->dst.y_offset); + mxr_dbg(mdev, "ratio = (%u, %u)\n", + geo->x_ratio, geo->y_ratio); +} + + +static const struct mxr_format *find_format_by_fourcc( + struct mxr_layer *layer, unsigned long fourcc); +static const struct mxr_format *find_format_by_index( + struct mxr_layer *layer, unsigned long index); + +static int mxr_enum_fmt(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + const struct mxr_format *fmt; + + mxr_dbg(mdev, "%s\n", __func__); + fmt = find_format_by_index(layer, f->index); + if (fmt == NULL) + return -EINVAL; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + + return 0; +} + +static int mxr_s_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mxr_layer *layer = video_drvdata(file); + const struct mxr_format *fmt; + struct v4l2_pix_format_mplane *pix; + struct mxr_device *mdev = layer->mdev; + struct mxr_geometry *geo = &layer->geo; + + mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__); + + pix = &f->fmt.pix_mp; + fmt = find_format_by_fourcc(layer, pix->pixelformat); + if (fmt == NULL) { + mxr_warn(mdev, "not recognized fourcc: %08x\n", + pix->pixelformat); + return -EINVAL; + } + layer->fmt = fmt; + geo->src.full_width = pix->width; + geo->src.width = pix->width; + geo->src.full_height = pix->height; + geo->src.height = pix->height; + /* assure consistency of geometry */ + mxr_layer_geo_fix(layer); + mxr_dbg(mdev, "width=%u height=%u span=%u\n", + geo->src.width, geo->src.height, geo->src.full_width); + + return 0; +} + +static unsigned int divup(unsigned int divident, unsigned int divisor) +{ + return (divident + divisor - 1) / divisor; +} + +unsigned long mxr_get_plane_size(const struct mxr_block *blk, + unsigned int width, unsigned int height) +{ + unsigned int bl_width = divup(width, blk->width); + unsigned int bl_height = divup(height, blk->height); + + return bl_width * bl_height * blk->size; +} + +static void mxr_mplane_fill(struct v4l2_plane_pix_format *planes, + const struct mxr_format *fmt, u32 width, u32 height) +{ + int i; + + memset(planes, 0, sizeof(*planes) * fmt->num_subframes); + for (i = 0; i < fmt->num_planes; ++i) { + struct v4l2_plane_pix_format *plane = planes + + fmt->plane2subframe[i]; + const struct mxr_block *blk = &fmt->plane[i]; + u32 bl_width = divup(width, blk->width); + u32 bl_height = divup(height, blk->height); + u32 sizeimage = bl_width * bl_height * blk->size; + u16 bytesperline = bl_width * blk->size / blk->height; + + plane->sizeimage += sizeimage; + plane->bytesperline = max(plane->bytesperline, bytesperline); + } +} + +static int mxr_g_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct mxr_layer *layer = video_drvdata(file); + struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp; + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + + pix->width = layer->geo.src.full_width; + pix->height = layer->geo.src.full_height; + pix->field = V4L2_FIELD_NONE; + pix->pixelformat = layer->fmt->fourcc; + pix->colorspace = layer->fmt->colorspace; + mxr_mplane_fill(pix->plane_fmt, layer->fmt, pix->width, pix->height); + + return 0; +} + +static inline struct mxr_crop *choose_crop_by_type(struct mxr_geometry *geo, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: + return &geo->dst; + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + return &geo->src; + default: + return NULL; + } +} + +static int mxr_g_crop(struct file *file, void *fh, struct v4l2_crop *a) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_crop *crop; + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + crop = choose_crop_by_type(&layer->geo, a->type); + if (crop == NULL) + return -EINVAL; + mxr_layer_geo_fix(layer); + a->c.left = crop->x_offset; + a->c.top = crop->y_offset; + a->c.width = crop->width; + a->c.height = crop->height; + return 0; +} + +static int mxr_s_crop(struct file *file, void *fh, struct v4l2_crop *a) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_crop *crop; + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + crop = choose_crop_by_type(&layer->geo, a->type); + if (crop == NULL) + return -EINVAL; + crop->x_offset = a->c.left; + crop->y_offset = a->c.top; + crop->width = a->c.width; + crop->height = a->c.height; + mxr_layer_geo_fix(layer); + return 0; +} + +static int mxr_cropcap(struct file *file, void *fh, struct v4l2_cropcap *a) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_crop *crop; + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + crop = choose_crop_by_type(&layer->geo, a->type); + if (crop == NULL) + return -EINVAL; + mxr_layer_geo_fix(layer); + a->bounds.left = 0; + a->bounds.top = 0; + a->bounds.width = crop->full_width; + a->bounds.top = crop->full_height; + a->defrect = a->bounds; + /* setting pixel aspect to 1/1 */ + a->pixelaspect.numerator = 1; + a->pixelaspect.denominator = 1; + return 0; +} + +static int mxr_enum_dv_presets(struct file *file, void *fh, + struct v4l2_dv_enum_preset *preset) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret; + + /* lock protects from changing sd_out */ + mutex_lock(&mdev->mutex); + ret = v4l2_subdev_call(to_outsd(mdev), video, enum_dv_presets, preset); + mutex_unlock(&mdev->mutex); + + return ret ? -EINVAL : 0; +} + +static int mxr_s_dv_preset(struct file *file, void *fh, + struct v4l2_dv_preset *preset) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret; + + /* lock protects from changing sd_out */ + mutex_lock(&mdev->mutex); + + /* preset change cannot be done while there is an entity + * dependant on output configuration + */ + if (mdev->n_output > 0) { + mutex_unlock(&mdev->mutex); + return -EBUSY; + } + + ret = v4l2_subdev_call(to_outsd(mdev), video, s_dv_preset, preset); + + mutex_unlock(&mdev->mutex); + + /* any failure should return EINVAL according to V4L2 doc */ + return ret ? -EINVAL : 0; +} + +static int mxr_g_dv_preset(struct file *file, void *fh, + struct v4l2_dv_preset *preset) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret; + + /* lock protects from changing sd_out */ + mutex_lock(&mdev->mutex); + ret = v4l2_subdev_call(to_outsd(mdev), video, g_dv_preset, preset); + mutex_unlock(&mdev->mutex); + + return ret ? -EINVAL : 0; +} + +static int mxr_s_std(struct file *file, void *fh, v4l2_std_id *norm) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret; + + /* lock protects from changing sd_out */ + mutex_lock(&mdev->mutex); + + /* standard change cannot be done while there is an entity + * dependant on output configuration + */ + if (mdev->n_output > 0) { + mutex_unlock(&mdev->mutex); + return -EBUSY; + } + + ret = v4l2_subdev_call(to_outsd(mdev), video, s_std_output, *norm); + + mutex_unlock(&mdev->mutex); + + return ret ? -EINVAL : 0; +} + +static int mxr_g_std(struct file *file, void *fh, v4l2_std_id *norm) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret; + + /* lock protects from changing sd_out */ + mutex_lock(&mdev->mutex); + ret = v4l2_subdev_call(to_outsd(mdev), video, g_std_output, norm); + mutex_unlock(&mdev->mutex); + + return ret ? -EINVAL : 0; +} + +static int mxr_enum_output(struct file *file, void *fh, struct v4l2_output *a) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + struct mxr_output *out; + struct v4l2_subdev *sd; + + if (a->index >= mdev->output_cnt) + return -EINVAL; + out = mdev->output[a->index]; + BUG_ON(out == NULL); + sd = out->sd; + strlcpy(a->name, out->name, sizeof(a->name)); + + /* try to obtain supported tv norms */ + v4l2_subdev_call(sd, video, g_tvnorms_output, &a->std); + a->capabilities = 0; + if (sd->ops->video && sd->ops->video->s_dv_preset) + a->capabilities |= V4L2_OUT_CAP_PRESETS; + if (sd->ops->video && sd->ops->video->s_std_output) + a->capabilities |= V4L2_OUT_CAP_STD; + a->type = V4L2_OUTPUT_TYPE_ANALOG; + + return 0; +} + +static int mxr_s_output(struct file *file, void *fh, unsigned int i) +{ + struct video_device *vfd = video_devdata(file); + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret = 0; + + if (i >= mdev->output_cnt || mdev->output[i] == NULL) + return -EINVAL; + + mutex_lock(&mdev->mutex); + if (mdev->n_output > 0) { + ret = -EBUSY; + goto done; + } + mdev->current_output = i; + vfd->tvnorms = 0; + v4l2_subdev_call(to_outsd(mdev), video, g_tvnorms_output, + &vfd->tvnorms); + mxr_dbg(mdev, "tvnorms = %08llx\n", vfd->tvnorms); + +done: + mutex_unlock(&mdev->mutex); + return ret; +} + +static int mxr_g_output(struct file *file, void *fh, unsigned int *p) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + + mutex_lock(&mdev->mutex); + *p = mdev->current_output; + mutex_unlock(&mdev->mutex); + + return 0; +} + +static int mxr_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + return vb2_reqbufs(&layer->vb_queue, p); +} + +static int mxr_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + return vb2_querybuf(&layer->vb_queue, p); +} + +static int mxr_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d(%d)\n", __func__, __LINE__, p->index); + return vb2_qbuf(&layer->vb_queue, p); +} + +static int mxr_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + return vb2_dqbuf(&layer->vb_queue, p, file->f_flags & O_NONBLOCK); +} + +static int mxr_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + return vb2_streamon(&layer->vb_queue, i); +} + +static int mxr_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + return vb2_streamoff(&layer->vb_queue, i); +} + +static const struct v4l2_ioctl_ops mxr_ioctl_ops = { + .vidioc_querycap = mxr_querycap, + /* format handling */ + .vidioc_enum_fmt_vid_out = mxr_enum_fmt, + .vidioc_s_fmt_vid_out_mplane = mxr_s_fmt, + .vidioc_g_fmt_vid_out_mplane = mxr_g_fmt, + /* buffer control */ + .vidioc_reqbufs = mxr_reqbufs, + .vidioc_querybuf = mxr_querybuf, + .vidioc_qbuf = mxr_qbuf, + .vidioc_dqbuf = mxr_dqbuf, + /* Streaming control */ + .vidioc_streamon = mxr_streamon, + .vidioc_streamoff = mxr_streamoff, + /* Preset functions */ + .vidioc_enum_dv_presets = mxr_enum_dv_presets, + .vidioc_s_dv_preset = mxr_s_dv_preset, + .vidioc_g_dv_preset = mxr_g_dv_preset, + /* analog TV standard functions */ + .vidioc_s_std = mxr_s_std, + .vidioc_g_std = mxr_g_std, + /* Output handling */ + .vidioc_enum_output = mxr_enum_output, + .vidioc_s_output = mxr_s_output, + .vidioc_g_output = mxr_g_output, + /* Crop ioctls */ + .vidioc_g_crop = mxr_g_crop, + .vidioc_s_crop = mxr_s_crop, + .vidioc_cropcap = mxr_cropcap, +}; + +static int mxr_video_open(struct file *file) +{ + struct mxr_layer *layer = video_drvdata(file); + struct mxr_device *mdev = layer->mdev; + int ret = 0; + + mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__); + /* assure device probe is finished */ + wait_for_device_probe(); + /* creating context for file descriptor */ + ret = v4l2_fh_open(file); + if (ret) { + mxr_err(mdev, "v4l2_fh_open failed\n"); + return ret; + } + + /* leaving if layer is already initialized */ + if (!v4l2_fh_is_singular_file(file)) + return 0; + + /* FIXME: should power be enabled on open? */ + ret = mxr_power_get(mdev); + if (ret) { + mxr_err(mdev, "power on failed\n"); + goto fail_fh_open; + } + + ret = vb2_queue_init(&layer->vb_queue); + if (ret != 0) { + mxr_err(mdev, "failed to initialize vb2 queue\n"); + goto fail_power; + } + /* set default format, first on the list */ + layer->fmt = layer->fmt_array[0]; + /* setup default geometry */ + mxr_layer_default_geo(layer); + + return 0; + +fail_power: + mxr_power_put(mdev); + +fail_fh_open: + v4l2_fh_release(file); + + return ret; +} + +static unsigned int +mxr_video_poll(struct file *file, struct poll_table_struct *wait) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + + return vb2_poll(&layer->vb_queue, file, wait); +} + +static int mxr_video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + + return vb2_mmap(&layer->vb_queue, vma); +} + +static int mxr_video_release(struct file *file) +{ + struct mxr_layer *layer = video_drvdata(file); + + mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__); + if (v4l2_fh_is_singular_file(file)) { + vb2_queue_release(&layer->vb_queue); + mxr_power_put(layer->mdev); + } + v4l2_fh_release(file); + return 0; +} + +static const struct v4l2_file_operations mxr_fops = { + .owner = THIS_MODULE, + .open = mxr_video_open, + .poll = mxr_video_poll, + .mmap = mxr_video_mmap, + .release = mxr_video_release, + .unlocked_ioctl = video_ioctl2, +}; + +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned long sizes[], + void *alloc_ctxs[]) +{ + struct mxr_layer *layer = vb2_get_drv_priv(vq); + const struct mxr_format *fmt = layer->fmt; + int i; + struct mxr_device *mdev = layer->mdev; + struct v4l2_plane_pix_format planes[3]; + + mxr_dbg(mdev, "%s\n", __func__); + /* checking if format was configured */ + if (fmt == NULL) + return -EINVAL; + mxr_dbg(mdev, "fmt = %s\n", fmt->name); + mxr_mplane_fill(planes, fmt, layer->geo.src.full_width, + layer->geo.src.full_height); + + *nplanes = fmt->num_subframes; + for (i = 0; i < fmt->num_subframes; ++i) { + alloc_ctxs[i] = layer->mdev->alloc_ctx; + sizes[i] = PAGE_ALIGN(planes[i].sizeimage); + mxr_dbg(mdev, "size[%d] = %08lx\n", i, sizes[i]); + } + + if (*nbuffers == 0) + *nbuffers = 1; + + return 0; +} + +static void buf_queue(struct vb2_buffer *vb) +{ + struct mxr_buffer *buffer = container_of(vb, struct mxr_buffer, vb); + struct mxr_layer *layer = vb2_get_drv_priv(vb->vb2_queue); + struct mxr_device *mdev = layer->mdev; + unsigned long flags; + int must_start = 0; + + spin_lock_irqsave(&layer->enq_slock, flags); + if (layer->state == MXR_LAYER_STREAMING_START) { + layer->state = MXR_LAYER_STREAMING; + must_start = 1; + } + list_add_tail(&buffer->list, &layer->enq_list); + spin_unlock_irqrestore(&layer->enq_slock, flags); + if (must_start) { + layer->ops.stream_set(layer, MXR_ENABLE); + mxr_streamer_get(mdev); + } + + mxr_dbg(mdev, "queuing buffer\n"); +} + +static void wait_lock(struct vb2_queue *vq) +{ + struct mxr_layer *layer = vb2_get_drv_priv(vq); + + mxr_dbg(layer->mdev, "%s\n", __func__); + mutex_lock(&layer->mutex); +} + +static void wait_unlock(struct vb2_queue *vq) +{ + struct mxr_layer *layer = vb2_get_drv_priv(vq); + + mxr_dbg(layer->mdev, "%s\n", __func__); + mutex_unlock(&layer->mutex); +} + +static int start_streaming(struct vb2_queue *vq) +{ + struct mxr_layer *layer = vb2_get_drv_priv(vq); + struct mxr_device *mdev = layer->mdev; + unsigned long flags; + + mxr_dbg(mdev, "%s\n", __func__); + /* block any changes in output configuration */ + mxr_output_get(mdev); + + /* update layers geometry */ + mxr_layer_geo_fix(layer); + mxr_geometry_dump(mdev, &layer->geo); + + layer->ops.format_set(layer); + /* enabling layer in hardware */ + spin_lock_irqsave(&layer->enq_slock, flags); + layer->state = MXR_LAYER_STREAMING_START; + spin_unlock_irqrestore(&layer->enq_slock, flags); + + return 0; +} + +static void mxr_watchdog(unsigned long arg) +{ + struct mxr_layer *layer = (struct mxr_layer *) arg; + struct mxr_device *mdev = layer->mdev; + unsigned long flags; + + mxr_err(mdev, "watchdog fired for layer %s\n", layer->vfd.name); + + spin_lock_irqsave(&layer->enq_slock, flags); + + if (layer->update_buf == layer->shadow_buf) + layer->update_buf = NULL; + if (layer->update_buf) { + vb2_buffer_done(&layer->update_buf->vb, VB2_BUF_STATE_ERROR); + layer->update_buf = NULL; + } + if (layer->shadow_buf) { + vb2_buffer_done(&layer->shadow_buf->vb, VB2_BUF_STATE_ERROR); + layer->shadow_buf = NULL; + } + spin_unlock_irqrestore(&layer->enq_slock, flags); +} + +static int stop_streaming(struct vb2_queue *vq) +{ + struct mxr_layer *layer = vb2_get_drv_priv(vq); + struct mxr_device *mdev = layer->mdev; + unsigned long flags; + struct timer_list watchdog; + struct mxr_buffer *buf, *buf_tmp; + + mxr_dbg(mdev, "%s\n", __func__); + + spin_lock_irqsave(&layer->enq_slock, flags); + + /* reset list */ + layer->state = MXR_LAYER_STREAMING_FINISH; + + /* set all buffer to be done */ + list_for_each_entry_safe(buf, buf_tmp, &layer->enq_list, list) { + list_del(&buf->list); + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); + } + + spin_unlock_irqrestore(&layer->enq_slock, flags); + + /* give 1 seconds to complete to complete last buffers */ + setup_timer_on_stack(&watchdog, mxr_watchdog, + (unsigned long)layer); + mod_timer(&watchdog, jiffies + msecs_to_jiffies(1000)); + + /* wait until all buffers are goes to done state */ + vb2_wait_for_all_buffers(vq); + + /* stop timer if all synchronization is done */ + del_timer_sync(&watchdog); + destroy_timer_on_stack(&watchdog); + + /* stopping hardware */ + spin_lock_irqsave(&layer->enq_slock, flags); + layer->state = MXR_LAYER_IDLE; + spin_unlock_irqrestore(&layer->enq_slock, flags); + + /* disabling layer in hardware */ + layer->ops.stream_set(layer, MXR_DISABLE); + /* remove one streamer */ + mxr_streamer_put(mdev); + /* allow changes in output configuration */ + mxr_output_put(mdev); + return 0; +} + +static struct vb2_ops mxr_video_qops = { + .queue_setup = queue_setup, + .buf_queue = buf_queue, + .wait_prepare = wait_unlock, + .wait_finish = wait_lock, + .start_streaming = start_streaming, + .stop_streaming = stop_streaming, +}; + +/* FIXME: try to put this functions to mxr_base_layer_create */ +int mxr_base_layer_register(struct mxr_layer *layer) +{ + struct mxr_device *mdev = layer->mdev; + int ret; + + ret = video_register_device(&layer->vfd, VFL_TYPE_GRABBER, -1); + if (ret) + mxr_err(mdev, "failed to register video device\n"); + else + mxr_info(mdev, "registered layer %s as /dev/video%d\n", + layer->vfd.name, layer->vfd.num); + return ret; +} + +void mxr_base_layer_unregister(struct mxr_layer *layer) +{ + video_unregister_device(&layer->vfd); +} + +void mxr_layer_release(struct mxr_layer *layer) +{ + if (layer->ops.release) + layer->ops.release(layer); +} + +void mxr_base_layer_release(struct mxr_layer *layer) +{ + kfree(layer); +} + +static void mxr_vfd_release(struct video_device *vdev) +{ + printk(KERN_INFO "video device release\n"); +} + +struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev, + int idx, char *name, struct mxr_layer_ops *ops) +{ + struct mxr_layer *layer; + + layer = kzalloc(sizeof *layer, GFP_KERNEL); + if (layer == NULL) { + mxr_err(mdev, "not enough memory for layer.\n"); + goto fail; + } + + layer->mdev = mdev; + layer->idx = idx; + layer->ops = *ops; + + spin_lock_init(&layer->enq_slock); + INIT_LIST_HEAD(&layer->enq_list); + mutex_init(&layer->mutex); + + layer->vfd = (struct video_device) { + .minor = -1, + .release = mxr_vfd_release, + .fops = &mxr_fops, + .ioctl_ops = &mxr_ioctl_ops, + }; + strlcpy(layer->vfd.name, name, sizeof(layer->vfd.name)); + /* let framework control PRIORITY */ + set_bit(V4L2_FL_USE_FH_PRIO, &layer->vfd.flags); + + video_set_drvdata(&layer->vfd, layer); + layer->vfd.lock = &layer->mutex; + layer->vfd.v4l2_dev = &mdev->v4l2_dev; + + layer->vb_queue = (struct vb2_queue) { + .type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, + .io_modes = VB2_MMAP | VB2_USERPTR, + .drv_priv = layer, + .buf_struct_size = sizeof(struct mxr_buffer), + .ops = &mxr_video_qops, + .mem_ops = &vb2_dma_contig_memops, + }; + + return layer; + +fail: + return NULL; +} + +static const struct mxr_format *find_format_by_fourcc( + struct mxr_layer *layer, unsigned long fourcc) +{ + int i; + + for (i = 0; i < layer->fmt_array_size; ++i) + if (layer->fmt_array[i]->fourcc == fourcc) + return layer->fmt_array[i]; + return NULL; +} + +static const struct mxr_format *find_format_by_index( + struct mxr_layer *layer, unsigned long index) +{ + if (index >= layer->fmt_array_size) + return NULL; + return layer->fmt_array[index]; +} + diff --git a/drivers/media/video/s5p-tv/mixer_vp_layer.c b/drivers/media/video/s5p-tv/mixer_vp_layer.c new file mode 100644 index 0000000..6950ed8 --- /dev/null +++ b/drivers/media/video/s5p-tv/mixer_vp_layer.c @@ -0,0 +1,211 @@ +/* + * Samsung TV Mixer driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#include "mixer.h" + +#include "regs-vp.h" + +#include <media/videobuf2-dma-contig.h> + +/* FORMAT DEFINITIONS */ +static const struct mxr_format mxr_fmt_nv12 = { + .name = "NV12", + .fourcc = V4L2_PIX_FMT_NV12, + .colorspace = V4L2_COLORSPACE_JPEG, + .num_planes = 2, + .plane = { + { .width = 1, .height = 1, .size = 1 }, + { .width = 2, .height = 2, .size = 2 }, + }, + .num_subframes = 1, + .cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR, +}; + +static const struct mxr_format mxr_fmt_nv21 = { + .name = "NV21", + .fourcc = V4L2_PIX_FMT_NV21, + .colorspace = V4L2_COLORSPACE_JPEG, + .num_planes = 2, + .plane = { + { .width = 1, .height = 1, .size = 1 }, + { .width = 2, .height = 2, .size = 2 }, + }, + .num_subframes = 1, + .cookie = VP_MODE_NV21 | VP_MODE_MEM_LINEAR, +}; + +static const struct mxr_format mxr_fmt_nv12m = { + .name = "NV12 (mplane)", + .fourcc = V4L2_PIX_FMT_NV12M, + .colorspace = V4L2_COLORSPACE_JPEG, + .num_planes = 2, + .plane = { + { .width = 1, .height = 1, .size = 1 }, + { .width = 2, .height = 2, .size = 2 }, + }, + .num_subframes = 2, + .plane2subframe = {0, 1}, + .cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR, +}; + +static const struct mxr_format mxr_fmt_nv12mt = { + .name = "NV12 tiled (mplane)", + .fourcc = V4L2_PIX_FMT_NV12MT, + .colorspace = V4L2_COLORSPACE_JPEG, + .num_planes = 2, + .plane = { + { .width = 128, .height = 32, .size = 4096 }, + { .width = 128, .height = 32, .size = 2048 }, + }, + .num_subframes = 2, + .plane2subframe = {0, 1}, + .cookie = VP_MODE_NV12 | VP_MODE_MEM_TILED, +}; + +static const struct mxr_format *mxr_video_format[] = { + &mxr_fmt_nv12, + &mxr_fmt_nv21, + &mxr_fmt_nv12m, + &mxr_fmt_nv12mt, +}; + +/* AUXILIARY CALLBACKS */ + +static void mxr_vp_layer_release(struct mxr_layer *layer) +{ + mxr_base_layer_unregister(layer); + mxr_base_layer_release(layer); +} + +static void mxr_vp_buffer_set(struct mxr_layer *layer, + struct mxr_buffer *buf) +{ + dma_addr_t luma_addr[2] = {0, 0}; + dma_addr_t chroma_addr[2] = {0, 0}; + + if (buf == NULL) { + mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr); + return; + } + luma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 0); + if (layer->fmt->num_subframes == 2) { + chroma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 1); + } else { + /* FIXME: mxr_get_plane_size compute integer division, + * which is slow and should not be performed in interrupt */ + chroma_addr[0] = luma_addr[0] + mxr_get_plane_size( + &layer->fmt->plane[0], layer->geo.src.full_width, + layer->geo.src.full_height); + } + if (layer->fmt->cookie & VP_MODE_MEM_TILED) { + luma_addr[1] = luma_addr[0] + 0x40; + chroma_addr[1] = chroma_addr[0] + 0x40; + } else { + luma_addr[1] = luma_addr[0] + layer->geo.src.full_width; + chroma_addr[1] = chroma_addr[0]; + } + mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr); +} + +static void mxr_vp_stream_set(struct mxr_layer *layer, int en) +{ + mxr_reg_vp_layer_stream(layer->mdev, en); +} + +static void mxr_vp_format_set(struct mxr_layer *layer) +{ + mxr_reg_vp_format(layer->mdev, layer->fmt, &layer->geo); +} + +static void mxr_vp_fix_geometry(struct mxr_layer *layer) +{ + struct mxr_geometry *geo = &layer->geo; + + /* align horizontal size to 8 pixels */ + geo->src.full_width = ALIGN(geo->src.full_width, 8); + /* limit to boundary size */ + geo->src.full_width = clamp_val(geo->src.full_width, 8, 8192); + geo->src.full_height = clamp_val(geo->src.full_height, 1, 8192); + geo->src.width = clamp_val(geo->src.width, 32, geo->src.full_width); + geo->src.width = min(geo->src.width, 2047U); + geo->src.height = clamp_val(geo->src.height, 4, geo->src.full_height); + geo->src.height = min(geo->src.height, 2047U); + + /* setting size of output window */ + geo->dst.width = clamp_val(geo->dst.width, 8, geo->dst.full_width); + geo->dst.height = clamp_val(geo->dst.height, 1, geo->dst.full_height); + + /* ensure that scaling is in range 1/4x to 16x */ + if (geo->src.width >= 4 * geo->dst.width) + geo->src.width = 4 * geo->dst.width; + if (geo->dst.width >= 16 * geo->src.width) + geo->dst.width = 16 * geo->src.width; + if (geo->src.height >= 4 * geo->dst.height) + geo->src.height = 4 * geo->dst.height; + if (geo->dst.height >= 16 * geo->src.height) + geo->dst.height = 16 * geo->src.height; + + /* setting scaling ratio */ + geo->x_ratio = (geo->src.width << 16) / geo->dst.width; + geo->y_ratio = (geo->src.height << 16) / geo->dst.height; + + /* adjust offsets */ + geo->src.x_offset = min(geo->src.x_offset, + geo->src.full_width - geo->src.width); + geo->src.y_offset = min(geo->src.y_offset, + geo->src.full_height - geo->src.height); + geo->dst.x_offset = min(geo->dst.x_offset, + geo->dst.full_width - geo->dst.width); + geo->dst.y_offset = min(geo->dst.y_offset, + geo->dst.full_height - geo->dst.height); +} + +/* PUBLIC API */ + +struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx) +{ + struct mxr_layer *layer; + int ret; + struct mxr_layer_ops ops = { + .release = mxr_vp_layer_release, + .buffer_set = mxr_vp_buffer_set, + .stream_set = mxr_vp_stream_set, + .format_set = mxr_vp_format_set, + .fix_geometry = mxr_vp_fix_geometry, + }; + char name[32]; + + sprintf(name, "video%d", idx); + + layer = mxr_base_layer_create(mdev, idx, name, &ops); + if (layer == NULL) { + mxr_err(mdev, "failed to initialize layer(%d) base\n", idx); + goto fail; + } + + layer->fmt_array = mxr_video_format; + layer->fmt_array_size = ARRAY_SIZE(mxr_video_format); + + ret = mxr_base_layer_register(layer); + if (ret) + goto fail_layer; + + return layer; + +fail_layer: + mxr_base_layer_release(layer); + +fail: + return NULL; +} + diff --git a/drivers/media/video/s5p-tv/regs-hdmi.h b/drivers/media/video/s5p-tv/regs-hdmi.h new file mode 100644 index 0000000..ac93ad6 --- /dev/null +++ b/drivers/media/video/s5p-tv/regs-hdmi.h @@ -0,0 +1,141 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-hdmi.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * HDMI register header file for Samsung TVOUT driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef SAMSUNG_REGS_HDMI_H +#define SAMSUNG_REGS_HDMI_H + +/* + * Register part +*/ + +#define HDMI_CTRL_BASE(x) ((x) + 0x00000000) +#define HDMI_CORE_BASE(x) ((x) + 0x00010000) +#define HDMI_TG_BASE(x) ((x) + 0x00050000) + +/* Control registers */ +#define HDMI_INTC_CON HDMI_CTRL_BASE(0x0000) +#define HDMI_INTC_FLAG HDMI_CTRL_BASE(0x0004) +#define HDMI_HPD_STATUS HDMI_CTRL_BASE(0x000C) +#define HDMI_PHY_RSTOUT HDMI_CTRL_BASE(0x0014) +#define HDMI_PHY_VPLL HDMI_CTRL_BASE(0x0018) +#define HDMI_PHY_CMU HDMI_CTRL_BASE(0x001C) +#define HDMI_CORE_RSTOUT HDMI_CTRL_BASE(0x0020) + +/* Core registers */ +#define HDMI_CON_0 HDMI_CORE_BASE(0x0000) +#define HDMI_CON_1 HDMI_CORE_BASE(0x0004) +#define HDMI_CON_2 HDMI_CORE_BASE(0x0008) +#define HDMI_SYS_STATUS HDMI_CORE_BASE(0x0010) +#define HDMI_PHY_STATUS HDMI_CORE_BASE(0x0014) +#define HDMI_STATUS_EN HDMI_CORE_BASE(0x0020) +#define HDMI_HPD HDMI_CORE_BASE(0x0030) +#define HDMI_MODE_SEL HDMI_CORE_BASE(0x0040) +#define HDMI_BLUE_SCREEN_0 HDMI_CORE_BASE(0x0050) +#define HDMI_BLUE_SCREEN_1 HDMI_CORE_BASE(0x0054) +#define HDMI_BLUE_SCREEN_2 HDMI_CORE_BASE(0x0058) +#define HDMI_H_BLANK_0 HDMI_CORE_BASE(0x00A0) +#define HDMI_H_BLANK_1 HDMI_CORE_BASE(0x00A4) +#define HDMI_V_BLANK_0 HDMI_CORE_BASE(0x00B0) +#define HDMI_V_BLANK_1 HDMI_CORE_BASE(0x00B4) +#define HDMI_V_BLANK_2 HDMI_CORE_BASE(0x00B8) +#define HDMI_H_V_LINE_0 HDMI_CORE_BASE(0x00C0) +#define HDMI_H_V_LINE_1 HDMI_CORE_BASE(0x00C4) +#define HDMI_H_V_LINE_2 HDMI_CORE_BASE(0x00C8) +#define HDMI_VSYNC_POL HDMI_CORE_BASE(0x00E4) +#define HDMI_INT_PRO_MODE HDMI_CORE_BASE(0x00E8) +#define HDMI_V_BLANK_F_0 HDMI_CORE_BASE(0x0110) +#define HDMI_V_BLANK_F_1 HDMI_CORE_BASE(0x0114) +#define HDMI_V_BLANK_F_2 HDMI_CORE_BASE(0x0118) +#define HDMI_H_SYNC_GEN_0 HDMI_CORE_BASE(0x0120) +#define HDMI_H_SYNC_GEN_1 HDMI_CORE_BASE(0x0124) +#define HDMI_H_SYNC_GEN_2 HDMI_CORE_BASE(0x0128) +#define HDMI_V_SYNC_GEN_1_0 HDMI_CORE_BASE(0x0130) +#define HDMI_V_SYNC_GEN_1_1 HDMI_CORE_BASE(0x0134) +#define HDMI_V_SYNC_GEN_1_2 HDMI_CORE_BASE(0x0138) +#define HDMI_V_SYNC_GEN_2_0 HDMI_CORE_BASE(0x0140) +#define HDMI_V_SYNC_GEN_2_1 HDMI_CORE_BASE(0x0144) +#define HDMI_V_SYNC_GEN_2_2 HDMI_CORE_BASE(0x0148) +#define HDMI_V_SYNC_GEN_3_0 HDMI_CORE_BASE(0x0150) +#define HDMI_V_SYNC_GEN_3_1 HDMI_CORE_BASE(0x0154) +#define HDMI_V_SYNC_GEN_3_2 HDMI_CORE_BASE(0x0158) +#define HDMI_AVI_CON HDMI_CORE_BASE(0x0300) +#define HDMI_AVI_BYTE(n) HDMI_CORE_BASE(0x0320 + 4 * (n)) +#define HDMI_DC_CONTROL HDMI_CORE_BASE(0x05C0) +#define HDMI_VIDEO_PATTERN_GEN HDMI_CORE_BASE(0x05C4) +#define HDMI_HPD_GEN HDMI_CORE_BASE(0x05C8) + +/* Timing generator registers */ +#define HDMI_TG_CMD HDMI_TG_BASE(0x0000) +#define HDMI_TG_H_FSZ_L HDMI_TG_BASE(0x0018) +#define HDMI_TG_H_FSZ_H HDMI_TG_BASE(0x001C) +#define HDMI_TG_HACT_ST_L HDMI_TG_BASE(0x0020) +#define HDMI_TG_HACT_ST_H HDMI_TG_BASE(0x0024) +#define HDMI_TG_HACT_SZ_L HDMI_TG_BASE(0x0028) +#define HDMI_TG_HACT_SZ_H HDMI_TG_BASE(0x002C) +#define HDMI_TG_V_FSZ_L HDMI_TG_BASE(0x0030) +#define HDMI_TG_V_FSZ_H HDMI_TG_BASE(0x0034) +#define HDMI_TG_VSYNC_L HDMI_TG_BASE(0x0038) +#define HDMI_TG_VSYNC_H HDMI_TG_BASE(0x003C) +#define HDMI_TG_VSYNC2_L HDMI_TG_BASE(0x0040) +#define HDMI_TG_VSYNC2_H HDMI_TG_BASE(0x0044) +#define HDMI_TG_VACT_ST_L HDMI_TG_BASE(0x0048) +#define HDMI_TG_VACT_ST_H HDMI_TG_BASE(0x004C) +#define HDMI_TG_VACT_SZ_L HDMI_TG_BASE(0x0050) +#define HDMI_TG_VACT_SZ_H HDMI_TG_BASE(0x0054) +#define HDMI_TG_FIELD_CHG_L HDMI_TG_BASE(0x0058) +#define HDMI_TG_FIELD_CHG_H HDMI_TG_BASE(0x005C) +#define HDMI_TG_VACT_ST2_L HDMI_TG_BASE(0x0060) +#define HDMI_TG_VACT_ST2_H HDMI_TG_BASE(0x0064) +#define HDMI_TG_VSYNC_TOP_HDMI_L HDMI_TG_BASE(0x0078) +#define HDMI_TG_VSYNC_TOP_HDMI_H HDMI_TG_BASE(0x007C) +#define HDMI_TG_VSYNC_BOT_HDMI_L HDMI_TG_BASE(0x0080) +#define HDMI_TG_VSYNC_BOT_HDMI_H HDMI_TG_BASE(0x0084) +#define HDMI_TG_FIELD_TOP_HDMI_L HDMI_TG_BASE(0x0088) +#define HDMI_TG_FIELD_TOP_HDMI_H HDMI_TG_BASE(0x008C) +#define HDMI_TG_FIELD_BOT_HDMI_L HDMI_TG_BASE(0x0090) +#define HDMI_TG_FIELD_BOT_HDMI_H HDMI_TG_BASE(0x0094) + +/* + * Bit definition part + */ + +/* HDMI_INTC_CON */ +#define HDMI_INTC_EN_GLOBAL (1 << 6) +#define HDMI_INTC_EN_HPD_PLUG (1 << 3) +#define HDMI_INTC_EN_HPD_UNPLUG (1 << 2) + +/* HDMI_INTC_FLAG */ +#define HDMI_INTC_FLAG_HPD_PLUG (1 << 3) +#define HDMI_INTC_FLAG_HPD_UNPLUG (1 << 2) + +/* HDMI_PHY_RSTOUT */ +#define HDMI_PHY_SW_RSTOUT (1 << 0) + +/* HDMI_CORE_RSTOUT */ +#define HDMI_CORE_SW_RSTOUT (1 << 0) + +/* HDMI_CON_0 */ +#define HDMI_BLUE_SCR_EN (1 << 5) +#define HDMI_EN (1 << 0) + +/* HDMI_PHY_STATUS */ +#define HDMI_PHY_STATUS_READY (1 << 0) + +/* HDMI_MODE_SEL */ +#define HDMI_MODE_HDMI_EN (1 << 1) +#define HDMI_MODE_DVI_EN (1 << 0) +#define HDMI_MODE_MASK (3 << 0) + +/* HDMI_TG_CMD */ +#define HDMI_TG_EN (1 << 0) + +#endif /* SAMSUNG_REGS_HDMI_H */ diff --git a/drivers/media/video/s5p-tv/regs-mixer.h b/drivers/media/video/s5p-tv/regs-mixer.h new file mode 100644 index 0000000..3c84426 --- /dev/null +++ b/drivers/media/video/s5p-tv/regs-mixer.h @@ -0,0 +1,121 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Mixer register header file for Samsung Mixer driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#ifndef SAMSUNG_REGS_MIXER_H +#define SAMSUNG_REGS_MIXER_H + +/* + * Register part + */ +#define MXR_STATUS 0x0000 +#define MXR_CFG 0x0004 +#define MXR_INT_EN 0x0008 +#define MXR_INT_STATUS 0x000C +#define MXR_LAYER_CFG 0x0010 +#define MXR_VIDEO_CFG 0x0014 +#define MXR_GRAPHIC0_CFG 0x0020 +#define MXR_GRAPHIC0_BASE 0x0024 +#define MXR_GRAPHIC0_SPAN 0x0028 +#define MXR_GRAPHIC0_SXY 0x002C +#define MXR_GRAPHIC0_WH 0x0030 +#define MXR_GRAPHIC0_DXY 0x0034 +#define MXR_GRAPHIC0_BLANK 0x0038 +#define MXR_GRAPHIC1_CFG 0x0040 +#define MXR_GRAPHIC1_BASE 0x0044 +#define MXR_GRAPHIC1_SPAN 0x0048 +#define MXR_GRAPHIC1_SXY 0x004C +#define MXR_GRAPHIC1_WH 0x0050 +#define MXR_GRAPHIC1_DXY 0x0054 +#define MXR_GRAPHIC1_BLANK 0x0058 +#define MXR_BG_CFG 0x0060 +#define MXR_BG_COLOR0 0x0064 +#define MXR_BG_COLOR1 0x0068 +#define MXR_BG_COLOR2 0x006C + +/* for parametrized access to layer registers */ +#define MXR_GRAPHIC_CFG(i) (0x0020 + (i) * 0x20) +#define MXR_GRAPHIC_BASE(i) (0x0024 + (i) * 0x20) +#define MXR_GRAPHIC_SPAN(i) (0x0028 + (i) * 0x20) +#define MXR_GRAPHIC_SXY(i) (0x002C + (i) * 0x20) +#define MXR_GRAPHIC_WH(i) (0x0030 + (i) * 0x20) +#define MXR_GRAPHIC_DXY(i) (0x0034 + (i) * 0x20) + +/* + * Bit definition part + */ + +/* generates mask for range of bits */ +#define MXR_MASK(high_bit, low_bit) \ + (((2 << ((high_bit) - (low_bit))) - 1) << (low_bit)) + +#define MXR_MASK_VAL(val, high_bit, low_bit) \ + (((val) << (low_bit)) & MXR_MASK(high_bit, low_bit)) + +/* bits for MXR_STATUS */ +#define MXR_STATUS_16_BURST (1 << 7) +#define MXR_STATUS_BURST_MASK (1 << 7) +#define MXR_STATUS_SYNC_ENABLE (1 << 2) +#define MXR_STATUS_REG_RUN (1 << 0) + +/* bits for MXR_CFG */ +#define MXR_CFG_OUT_YUV444 (0 << 8) +#define MXR_CFG_OUT_RGB888 (1 << 8) +#define MXR_CFG_DST_SDO (0 << 7) +#define MXR_CFG_DST_HDMI (1 << 7) +#define MXR_CFG_DST_MASK (1 << 7) +#define MXR_CFG_SCAN_HD_720 (0 << 6) +#define MXR_CFG_SCAN_HD_1080 (1 << 6) +#define MXR_CFG_GRP1_ENABLE (1 << 5) +#define MXR_CFG_GRP0_ENABLE (1 << 4) +#define MXR_CFG_VP_ENABLE (1 << 3) +#define MXR_CFG_SCAN_INTERLACE (0 << 2) +#define MXR_CFG_SCAN_PROGRASSIVE (1 << 2) +#define MXR_CFG_SCAN_NTSC (0 << 1) +#define MXR_CFG_SCAN_PAL (1 << 1) +#define MXR_CFG_SCAN_SD (0 << 0) +#define MXR_CFG_SCAN_HD (1 << 0) +#define MXR_CFG_SCAN_MASK 0x47 + +/* bits for MXR_GRAPHICn_CFG */ +#define MXR_GRP_CFG_COLOR_KEY_DISABLE (1 << 21) +#define MXR_GRP_CFG_BLEND_PRE_MUL (1 << 20) +#define MXR_GRP_CFG_FORMAT_VAL(x) MXR_MASK_VAL(x, 11, 8) +#define MXR_GRP_CFG_FORMAT_MASK MXR_GRP_CFG_FORMAT_VAL(~0) +#define MXR_GRP_CFG_ALPHA_VAL(x) MXR_MASK_VAL(x, 7, 0) + +/* bits for MXR_GRAPHICn_WH */ +#define MXR_GRP_WH_H_SCALE(x) MXR_MASK_VAL(x, 28, 28) +#define MXR_GRP_WH_V_SCALE(x) MXR_MASK_VAL(x, 12, 12) +#define MXR_GRP_WH_WIDTH(x) MXR_MASK_VAL(x, 26, 16) +#define MXR_GRP_WH_HEIGHT(x) MXR_MASK_VAL(x, 10, 0) + +/* bits for MXR_GRAPHICn_SXY */ +#define MXR_GRP_SXY_SX(x) MXR_MASK_VAL(x, 26, 16) +#define MXR_GRP_SXY_SY(x) MXR_MASK_VAL(x, 10, 0) + +/* bits for MXR_GRAPHICn_DXY */ +#define MXR_GRP_DXY_DX(x) MXR_MASK_VAL(x, 26, 16) +#define MXR_GRP_DXY_DY(x) MXR_MASK_VAL(x, 10, 0) + +/* bits for MXR_INT_EN */ +#define MXR_INT_EN_VSYNC (1 << 11) +#define MXR_INT_EN_ALL (0x0f << 8) + +/* bit for MXR_INT_STATUS */ +#define MXR_INT_CLEAR_VSYNC (1 << 11) +#define MXR_INT_STATUS_VSYNC (1 << 0) + +/* bit for MXR_LAYER_CFG */ +#define MXR_LAYER_CFG_GRP1_VAL(x) MXR_MASK_VAL(x, 11, 8) +#define MXR_LAYER_CFG_GRP0_VAL(x) MXR_MASK_VAL(x, 7, 4) +#define MXR_LAYER_CFG_VP_VAL(x) MXR_MASK_VAL(x, 3, 0) + +#endif /* SAMSUNG_REGS_MIXER_H */ + diff --git a/drivers/media/video/s5p-tv/regs-sdo.h b/drivers/media/video/s5p-tv/regs-sdo.h new file mode 100644 index 0000000..7f7c2b8a --- /dev/null +++ b/drivers/media/video/s5p-tv/regs-sdo.h @@ -0,0 +1,63 @@ +/* drivers/media/video/s5p-tv/regs-sdo.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SDO register description file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SAMSUNG_REGS_SDO_H +#define SAMSUNG_REGS_SDO_H + +/* + * Register part + */ + +#define SDO_CLKCON 0x0000 +#define SDO_CONFIG 0x0008 +#define SDO_VBI 0x0014 +#define SDO_DAC 0x003C +#define SDO_CCCON 0x0180 +#define SDO_IRQ 0x0280 +#define SDO_IRQMASK 0x0284 +#define SDO_VERSION 0x03D8 + +/* + * Bit definition part + */ + +/* SDO Clock Control Register (SDO_CLKCON) */ +#define SDO_TVOUT_SW_RESET (1 << 4) +#define SDO_TVOUT_CLOCK_READY (1 << 1) +#define SDO_TVOUT_CLOCK_ON (1 << 0) + +/* SDO Video Standard Configuration Register (SDO_CONFIG) */ +#define SDO_PROGRESSIVE (1 << 4) +#define SDO_NTSC_M 0 +#define SDO_PAL_M 1 +#define SDO_PAL_BGHID 2 +#define SDO_PAL_N 3 +#define SDO_PAL_NC 4 +#define SDO_NTSC_443 8 +#define SDO_PAL_60 9 +#define SDO_STANDARD_MASK 0xf + +/* SDO VBI Configuration Register (SDO_VBI) */ +#define SDO_CVBS_WSS_INS (1 << 14) +#define SDO_CVBS_CLOSED_CAPTION_MASK (3 << 12) + +/* SDO DAC Configuration Register (SDO_DAC) */ +#define SDO_POWER_ON_DAC (1 << 0) + +/* SDO Color Compensation On/Off Control (SDO_CCCON) */ +#define SDO_COMPENSATION_BHS_ADJ_OFF (1 << 4) +#define SDO_COMPENSATION_CVBS_COMP_OFF (1 << 0) + +/* SDO Interrupt Request Register (SDO_IRQ) */ +#define SDO_VSYNC_IRQ_PEND (1 << 0) + +#endif /* SAMSUNG_REGS_SDO_H */ diff --git a/drivers/media/video/s5p-tv/regs-vp.h b/drivers/media/video/s5p-tv/regs-vp.h new file mode 100644 index 0000000..6c63984 --- /dev/null +++ b/drivers/media/video/s5p-tv/regs-vp.h @@ -0,0 +1,88 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Video processor register header file for Samsung Mixer driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SAMSUNG_REGS_VP_H +#define SAMSUNG_REGS_VP_H + +/* + * Register part + */ + +#define VP_ENABLE 0x0000 +#define VP_SRESET 0x0004 +#define VP_SHADOW_UPDATE 0x0008 +#define VP_FIELD_ID 0x000C +#define VP_MODE 0x0010 +#define VP_IMG_SIZE_Y 0x0014 +#define VP_IMG_SIZE_C 0x0018 +#define VP_PER_RATE_CTRL 0x001C +#define VP_TOP_Y_PTR 0x0028 +#define VP_BOT_Y_PTR 0x002C +#define VP_TOP_C_PTR 0x0030 +#define VP_BOT_C_PTR 0x0034 +#define VP_ENDIAN_MODE 0x03CC +#define VP_SRC_H_POSITION 0x0044 +#define VP_SRC_V_POSITION 0x0048 +#define VP_SRC_WIDTH 0x004C +#define VP_SRC_HEIGHT 0x0050 +#define VP_DST_H_POSITION 0x0054 +#define VP_DST_V_POSITION 0x0058 +#define VP_DST_WIDTH 0x005C +#define VP_DST_HEIGHT 0x0060 +#define VP_H_RATIO 0x0064 +#define VP_V_RATIO 0x0068 +#define VP_POLY8_Y0_LL 0x006C +#define VP_POLY4_Y0_LL 0x00EC +#define VP_POLY4_C0_LL 0x012C + +/* + * Bit definition part + */ + +/* generates mask for range of bits */ + +#define VP_MASK(high_bit, low_bit) \ + (((2 << ((high_bit) - (low_bit))) - 1) << (low_bit)) + +#define VP_MASK_VAL(val, high_bit, low_bit) \ + (((val) << (low_bit)) & VP_MASK(high_bit, low_bit)) + + /* VP_ENABLE */ +#define VP_ENABLE_ON (1 << 0) + +/* VP_SRESET */ +#define VP_SRESET_PROCESSING (1 << 0) + +/* VP_SHADOW_UPDATE */ +#define VP_SHADOW_UPDATE_ENABLE (1 << 0) + +/* VP_MODE */ +#define VP_MODE_NV12 (0 << 6) +#define VP_MODE_NV21 (1 << 6) +#define VP_MODE_LINE_SKIP (1 << 5) +#define VP_MODE_MEM_LINEAR (0 << 4) +#define VP_MODE_MEM_TILED (1 << 4) +#define VP_MODE_FMT_MASK (5 << 4) +#define VP_MODE_FIELD_ID_AUTO_TOGGLING (1 << 2) +#define VP_MODE_2D_IPC (1 << 1) + +/* VP_IMG_SIZE_Y */ +/* VP_IMG_SIZE_C */ +#define VP_IMG_HSIZE(x) VP_MASK_VAL(x, 29, 16) +#define VP_IMG_VSIZE(x) VP_MASK_VAL(x, 13, 0) + +/* VP_SRC_H_POSITION */ +#define VP_SRC_H_POSITION_VAL(x) VP_MASK_VAL(x, 14, 4) + +/* VP_ENDIAN_MODE */ +#define VP_ENDIAN_MODE_LITTLE (1 << 0) + +#endif /* SAMSUNG_REGS_VP_H */ diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c new file mode 100644 index 0000000..4dddd6b --- /dev/null +++ b/drivers/media/video/s5p-tv/sdo_drv.c @@ -0,0 +1,479 @@ +/* + * Samsung Standard Definition Output (SDO) driver + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * + * Tomasz Stanislawski, <t.stanislaws@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published + * by the Free Software Foundiation. either version 2 of the License, + * or (at your option) any later version + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include <media/v4l2-subdev.h> + +#include "regs-sdo.h" + +MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>"); +MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)"); +MODULE_LICENSE("GPL"); + +#define SDO_DEFAULT_STD V4L2_STD_PAL + +struct sdo_format { + v4l2_std_id id; + /* all modes are 720 pixels wide */ + unsigned int height; + unsigned int cookie; +}; + +struct sdo_device { + /** pointer to device parent */ + struct device *dev; + /** base address of SDO registers */ + void __iomem *regs; + /** SDO interrupt */ + unsigned int irq; + /** DAC source clock */ + struct clk *sclk_dac; + /** DAC clock */ + struct clk *dac; + /** DAC physical interface */ + struct clk *dacphy; + /** clock for control of VPLL */ + struct clk *fout_vpll; + /** regulator for SDO IP power */ + struct regulator *vdac; + /** regulator for SDO plug detection */ + struct regulator *vdet; + /** subdev used as device interface */ + struct v4l2_subdev sd; + /** current format */ + const struct sdo_format *fmt; +}; + +static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct sdo_device, sd); +} + +static inline +void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask) +{ + u32 old = readl(sdev->regs + reg_id); + value = (value & mask) | (old & ~mask); + writel(value, sdev->regs + reg_id); +} + +static inline +void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value) +{ + writel(value, sdev->regs + reg_id); +} + +static inline +u32 sdo_read(struct sdo_device *sdev, u32 reg_id) +{ + return readl(sdev->regs + reg_id); +} + +static irqreturn_t sdo_irq_handler(int irq, void *dev_data) +{ + struct sdo_device *sdev = dev_data; + + /* clear interrupt */ + sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND); + return IRQ_HANDLED; +} + +static void sdo_reg_debug(struct sdo_device *sdev) +{ +#define DBGREG(reg_id) \ + dev_info(sdev->dev, #reg_id " = %08x\n", \ + sdo_read(sdev, reg_id)) + + DBGREG(SDO_CLKCON); + DBGREG(SDO_CONFIG); + DBGREG(SDO_VBI); + DBGREG(SDO_DAC); + DBGREG(SDO_IRQ); + DBGREG(SDO_IRQMASK); + DBGREG(SDO_VERSION); +} + +static const struct sdo_format sdo_format[] = { + { V4L2_STD_PAL_N, .height = 576, .cookie = SDO_PAL_N }, + { V4L2_STD_PAL_Nc, .height = 576, .cookie = SDO_PAL_NC }, + { V4L2_STD_PAL_M, .height = 480, .cookie = SDO_PAL_M }, + { V4L2_STD_PAL_60, .height = 480, .cookie = SDO_PAL_60 }, + { V4L2_STD_NTSC_443, .height = 480, .cookie = SDO_NTSC_443 }, + { V4L2_STD_PAL, .height = 576, .cookie = SDO_PAL_BGHID }, + { V4L2_STD_NTSC_M, .height = 480, .cookie = SDO_NTSC_M }, +}; + +static const struct sdo_format *sdo_find_format(v4l2_std_id id) +{ + int i; + for (i = 0; i < ARRAY_SIZE(sdo_format); ++i) + if (sdo_format[i].id & id) + return &sdo_format[i]; + return NULL; +} + +static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + *std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL | + V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | + V4L2_STD_NTSC_443 | V4L2_STD_PAL_60; + return 0; +} + +static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct sdo_device *sdev = sd_to_sdev(sd); + const struct sdo_format *fmt; + fmt = sdo_find_format(std); + if (fmt == NULL) + return -EINVAL; + sdev->fmt = fmt; + return 0; +} + +static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + *std = sd_to_sdev(sd)->fmt->id; + return 0; +} + +static int sdo_g_mbus_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt) +{ + struct sdo_device *sdev = sd_to_sdev(sd); + + if (!sdev->fmt) + return -ENXIO; + /* all modes are 720 pixels wide */ + fmt->width = 720; + fmt->height = sdev->fmt->height; + fmt->code = V4L2_MBUS_FMT_FIXED; + fmt->field = V4L2_FIELD_INTERLACED; + return 0; +} + +static int sdo_s_power(struct v4l2_subdev *sd, int on) +{ + struct sdo_device *sdev = sd_to_sdev(sd); + struct device *dev = sdev->dev; + int ret; + + dev_info(dev, "sdo_s_power(%d)\n", on); + + if (on) + ret = pm_runtime_get_sync(dev); + else + ret = pm_runtime_put_sync(dev); + + /* only values < 0 indicate errors */ + return IS_ERR_VALUE(ret) ? ret : 0; +} + +static int sdo_streamon(struct sdo_device *sdev) +{ + /* set proper clock for Timing Generator */ + clk_set_rate(sdev->fout_vpll, 54000000); + dev_info(sdev->dev, "fout_vpll.rate = %lu\n", + clk_get_rate(sdev->fout_vpll)); + /* enable clock in SDO */ + sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON); + clk_enable(sdev->dacphy); + /* enable DAC */ + sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC); + sdo_reg_debug(sdev); + return 0; +} + +static int sdo_streamoff(struct sdo_device *sdev) +{ + int tries; + + sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC); + clk_disable(sdev->dacphy); + sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON); + for (tries = 100; tries; --tries) { + if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY) + break; + mdelay(1); + } + if (tries == 0) + dev_err(sdev->dev, "failed to stop streaming\n"); + return tries ? 0 : -EIO; +} + +static int sdo_s_stream(struct v4l2_subdev *sd, int on) +{ + struct sdo_device *sdev = sd_to_sdev(sd); + return on ? sdo_streamon(sdev) : sdo_streamoff(sdev); +} + +static const struct v4l2_subdev_core_ops sdo_sd_core_ops = { + .s_power = sdo_s_power, +}; + +static const struct v4l2_subdev_video_ops sdo_sd_video_ops = { + .s_std_output = sdo_s_std_output, + .g_std_output = sdo_g_std_output, + .g_tvnorms_output = sdo_g_tvnorms_output, + .g_mbus_fmt = sdo_g_mbus_fmt, + .s_stream = sdo_s_stream, +}; + +static const struct v4l2_subdev_ops sdo_sd_ops = { + .core = &sdo_sd_core_ops, + .video = &sdo_sd_video_ops, +}; + +static int sdo_runtime_suspend(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sdo_device *sdev = sd_to_sdev(sd); + + dev_info(dev, "suspend\n"); + regulator_disable(sdev->vdet); + regulator_disable(sdev->vdac); + clk_disable(sdev->sclk_dac); + return 0; +} + +static int sdo_runtime_resume(struct device *dev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct sdo_device *sdev = sd_to_sdev(sd); + + dev_info(dev, "resume\n"); + clk_enable(sdev->sclk_dac); + regulator_enable(sdev->vdac); + regulator_enable(sdev->vdet); + + /* software reset */ + sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET); + mdelay(10); + sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET); + + /* setting TV mode */ + sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK); + /* XXX: forcing interlaced mode using undocumented bit */ + sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE); + /* turn all VBI off */ + sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS | + SDO_CVBS_CLOSED_CAPTION_MASK); + /* turn all post processing off */ + sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF | + SDO_COMPENSATION_CVBS_COMP_OFF); + sdo_reg_debug(sdev); + return 0; +} + +static const struct dev_pm_ops sdo_pm_ops = { + .runtime_suspend = sdo_runtime_suspend, + .runtime_resume = sdo_runtime_resume, +}; + +static int __devinit sdo_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sdo_device *sdev; + struct resource *res; + int ret = 0; + struct clk *sclk_vpll; + + dev_info(dev, "probe start\n"); + sdev = kzalloc(sizeof *sdev, GFP_KERNEL); + if (!sdev) { + dev_err(dev, "not enough memory.\n"); + ret = -ENOMEM; + goto fail; + } + sdev->dev = dev; + + /* mapping registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "get memory resource failed.\n"); + ret = -ENXIO; + goto fail_sdev; + } + + sdev->regs = ioremap(res->start, resource_size(res)); + if (sdev->regs == NULL) { + dev_err(dev, "register mapping failed.\n"); + ret = -ENXIO; + goto fail_sdev; + } + + /* acquiring interrupt */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "get interrupt resource failed.\n"); + ret = -ENXIO; + goto fail_regs; + } + ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev); + if (ret) { + dev_err(dev, "request interrupt failed.\n"); + goto fail_regs; + } + sdev->irq = res->start; + + /* acquire clocks */ + sdev->sclk_dac = clk_get(dev, "sclk_dac"); + if (IS_ERR_OR_NULL(sdev->sclk_dac)) { + dev_err(dev, "failed to get clock 'sclk_dac'\n"); + ret = -ENXIO; + goto fail_irq; + } + sdev->dac = clk_get(dev, "dac"); + if (IS_ERR_OR_NULL(sdev->dac)) { + dev_err(dev, "failed to get clock 'dac'\n"); + ret = -ENXIO; + goto fail_sclk_dac; + } + sdev->dacphy = clk_get(dev, "dacphy"); + if (IS_ERR_OR_NULL(sdev->dacphy)) { + dev_err(dev, "failed to get clock 'dacphy'\n"); + ret = -ENXIO; + goto fail_dac; + } + sclk_vpll = clk_get(dev, "sclk_vpll"); + if (IS_ERR_OR_NULL(sclk_vpll)) { + dev_err(dev, "failed to get clock 'sclk_vpll'\n"); + ret = -ENXIO; + goto fail_dacphy; + } + clk_set_parent(sdev->sclk_dac, sclk_vpll); + clk_put(sclk_vpll); + sdev->fout_vpll = clk_get(dev, "fout_vpll"); + if (IS_ERR_OR_NULL(sdev->fout_vpll)) { + dev_err(dev, "failed to get clock 'fout_vpll'\n"); + goto fail_dacphy; + } + dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll)); + + /* acquire regulator */ + sdev->vdac = regulator_get(dev, "vdd33a_dac"); + if (IS_ERR_OR_NULL(sdev->vdac)) { + dev_err(dev, "failed to get regulator 'vdac'\n"); + goto fail_fout_vpll; + } + sdev->vdet = regulator_get(dev, "vdet"); + if (IS_ERR_OR_NULL(sdev->vdet)) { + dev_err(dev, "failed to get regulator 'vdet'\n"); + goto fail_vdac; + } + + /* enable gate for dac clock, because mixer uses it */ + clk_enable(sdev->dac); + + /* configure power management */ + pm_runtime_enable(dev); + + /* configuration of interface subdevice */ + v4l2_subdev_init(&sdev->sd, &sdo_sd_ops); + sdev->sd.owner = THIS_MODULE; + strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name); + + /* set default format */ + sdev->fmt = sdo_find_format(SDO_DEFAULT_STD); + BUG_ON(sdev->fmt == NULL); + + /* keeping subdev in device's private for use by other drivers */ + dev_set_drvdata(dev, &sdev->sd); + + dev_info(dev, "probe succeeded\n"); + return 0; + +fail_vdac: + regulator_put(sdev->vdac); +fail_fout_vpll: + clk_put(sdev->fout_vpll); +fail_dacphy: + clk_put(sdev->dacphy); +fail_dac: + clk_put(sdev->dac); +fail_sclk_dac: + clk_put(sdev->sclk_dac); +fail_irq: + free_irq(sdev->irq, sdev); +fail_regs: + iounmap(sdev->regs); +fail_sdev: + kfree(sdev); +fail: + dev_info(dev, "probe failed\n"); + return ret; +} + +static int __devexit sdo_remove(struct platform_device *pdev) +{ + struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev); + struct sdo_device *sdev = sd_to_sdev(sd); + + pm_runtime_disable(&pdev->dev); + clk_disable(sdev->dac); + regulator_put(sdev->vdet); + regulator_put(sdev->vdac); + clk_put(sdev->fout_vpll); + clk_put(sdev->dacphy); + clk_put(sdev->dac); + clk_put(sdev->sclk_dac); + free_irq(sdev->irq, sdev); + iounmap(sdev->regs); + kfree(sdev); + + dev_info(&pdev->dev, "remove successful\n"); + return 0; +} + +static struct platform_driver sdo_driver __refdata = { + .probe = sdo_probe, + .remove = __devexit_p(sdo_remove), + .driver = { + .name = "s5p-sdo", + .owner = THIS_MODULE, + .pm = &sdo_pm_ops, + } +}; + +static int __init sdo_init(void) +{ + int ret; + static const char banner[] __initdata = KERN_INFO \ + "Samsung Standard Definition Output (SDO) driver, " + "(c) 2010-2011 Samsung Electronics Co., Ltd.\n"; + printk(banner); + + ret = platform_driver_register(&sdo_driver); + if (ret) + printk(KERN_ERR "SDO platform driver register failed\n"); + + return ret; +} +module_init(sdo_init); + +static void __exit sdo_exit(void) +{ + platform_driver_unregister(&sdo_driver); +} +module_exit(sdo_exit); diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index 0db9092..f2ae405 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -757,8 +757,8 @@ static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_CHROMA_AGC: /* chroma gain cluster */ - if (state->agc->cur.val) - state->gain->cur.val = + if (state->agc->val) + state->gain->val = saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; break; } diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index e2062b2..0f9fb99 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4951,8 +4951,9 @@ struct saa7134_board saa7134_boards[] = { .audio_clock = 0x00187de7, .tuner_type = TUNER_XC2028, .radio_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_addr = 0x61, .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, .vmux = 3, @@ -6992,6 +6993,11 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev, msleep(10); saa7134_set_gpio(dev, 18, 1); break; + case SAA7134_BOARD_VIDEOMATE_T750: + saa7134_set_gpio(dev, 20, 0); + msleep(10); + saa7134_set_gpio(dev, 20, 1); + break; } return 0; } @@ -7451,6 +7457,11 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0e050000, 0x0c050000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0e050000, 0x0c050000); break; + case SAA7134_BOARD_VIDEOMATE_T750: + /* enable the analog tuner */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00008000, 0x00008000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + break; } return 0; } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index f9be737..ca65cda 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -39,6 +39,8 @@ MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); +MODULE_VERSION(SAA7134_VERSION); + /* ------------------------------------------------------------------ */ @@ -1332,14 +1334,8 @@ static struct pci_driver saa7134_pci_driver = { static int __init saa7134_init(void) { INIT_LIST_HEAD(&saa7134_devlist); - printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n", - (SAA7134_VERSION_CODE >> 16) & 0xff, - (SAA7134_VERSION_CODE >> 8) & 0xff, - SAA7134_VERSION_CODE & 0xff); -#ifdef SNAPSHOT - printk(KERN_INFO "saa7130/34: snapshot date %04d-%02d-%02d\n", - SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100); -#endif + printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n", + SAA7134_VERSION); return pci_register_driver(&saa7134_pci_driver); } diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 996a206..1e4ef16 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -56,6 +56,7 @@ #include "lgs8gxx.h" #include "zl10353.h" +#include "qt1010.h" #include "zl10036.h" #include "zl10039.h" @@ -939,6 +940,18 @@ static struct zl10353_config behold_x7_config = { .disable_i2c_gate_ctrl = 1, }; +static struct zl10353_config videomate_t750_zl10353_config = { + .demod_address = 0x0f, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct qt1010_config videomate_t750_qt1010_config = { + .i2c_address = 0x62 +}; + + /* ================================================================== * tda10086 based DVB-S cards, helper functions */ @@ -1650,6 +1663,18 @@ static int dvb_init(struct saa7134_dev *dev) __func__); break; + case SAA7134_BOARD_VIDEOMATE_T750: + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &videomate_t750_zl10353_config, + &dev->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(qt1010_attach, + fe0->dvb.frontend, + &dev->i2c_adap, + &videomate_t750_qt1010_config) == NULL) + wprintk("error attaching QT1010\n"); + } + break; case SAA7134_BOARD_ZOLID_HYBRID_PCI: fe0->dvb.frontend = dvb_attach(tda10048_attach, &zolid_tda10048_config, diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 18294db..dde361a 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -172,7 +172,6 @@ static int empress_querycap(struct file *file, void *priv, strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 776ba2d..9cf7914f 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1810,7 +1810,6 @@ static int saa7134_querycap(struct file *file, void *priv, strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE | @@ -2307,7 +2306,6 @@ static int radio_querycap(struct file *file, void *priv, strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; cap->capabilities = V4L2_CAP_TUNER; return 0; } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 28eb103..bc8d6bb 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -19,8 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> -#define SAA7134_VERSION_CODE KERNEL_VERSION(0, 2, 16) +#define SAA7134_VERSION "0, 2, 17" #include <linux/pci.h> #include <linux/i2c.h> diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c index 4003645..2fd38a0 100644 --- a/drivers/media/video/saa7164/saa7164-encoder.c +++ b/drivers/media/video/saa7164/saa7164-encoder.c @@ -1246,7 +1246,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait) struct saa7164_encoder_fh *fh = (struct saa7164_encoder_fh *)file->private_data; struct saa7164_port *port = fh->port; - struct saa7164_user_buffer *ubuf; unsigned int mask = 0; port->last_poll_msecs_diff = port->last_poll_msecs; @@ -1278,10 +1277,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait) } /* Pull the first buffer from the used list */ - ubuf = list_first_entry(&port->list_buf_used.list, - struct saa7164_user_buffer, list); - - if (ubuf) + if (!list_empty(&port->list_buf_used.list)) mask |= POLLIN | POLLRDNORM; return mask; diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c index bc1fced..e2e0341 100644 --- a/drivers/media/video/saa7164/saa7164-vbi.c +++ b/drivers/media/video/saa7164/saa7164-vbi.c @@ -1192,7 +1192,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait) { struct saa7164_vbi_fh *fh = (struct saa7164_vbi_fh *)file->private_data; struct saa7164_port *port = fh->port; - struct saa7164_user_buffer *ubuf; unsigned int mask = 0; port->last_poll_msecs_diff = port->last_poll_msecs; @@ -1224,10 +1223,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait) } /* Pull the first buffer from the used list */ - ubuf = list_first_entry(&port->list_buf_used.list, - struct saa7164_user_buffer, list); - - if (ubuf) + if (!list_empty(&port->list_buf_used.list)) mask |= POLLIN | POLLRDNORM; return mask; diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h index 16745d2..6678bf1 100644 --- a/drivers/media/video/saa7164/saa7164.h +++ b/drivers/media/video/saa7164/saa7164.h @@ -48,7 +48,6 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> #include <linux/kdev_t.h> -#include <linux/version.h> #include <linux/mutex.h> #include <linux/crc32.h> #include <linux/kthread.h> diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 3ae5c9c..e540898 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -27,7 +27,6 @@ #include <linux/mm.h> #include <linux/moduleparam.h> #include <linux/time.h> -#include <linux/version.h> #include <linux/slab.h> #include <linux/device.h> #include <linux/platform_device.h> @@ -39,6 +38,7 @@ #include <media/v4l2-dev.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> +#include <media/sh_mobile_csi2.h> #include <media/videobuf2-dma-contig.h> #include <media/v4l2-mediabus.h> #include <media/soc_mediabus.h> @@ -96,6 +96,7 @@ struct sh_mobile_ceu_buffer { struct sh_mobile_ceu_dev { struct soc_camera_host ici; struct soc_camera_device *icd; + struct platform_device *csi2_pdev; unsigned int irq; void __iomem *base; @@ -205,7 +206,7 @@ static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev) if (2 != success) { - dev_warn(&icd->dev, "soft reset time out\n"); + dev_warn(icd->pdev, "soft reset time out\n"); return -EIO; } @@ -220,7 +221,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq, unsigned long sizes[], void *alloc_ctxs[]) { struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); @@ -242,7 +243,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq, *count = pcdev->video_limit / PAGE_ALIGN(sizes[0]); } - dev_dbg(icd->dev.parent, "count=%d, size=%lu\n", *count, sizes[0]); + dev_dbg(icd->parent, "count=%d, size=%lu\n", *count, sizes[0]); return 0; } @@ -351,7 +352,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb) buf = to_ceu_vb(vb); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); /* Added list head initialization on alloc */ @@ -371,7 +372,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb) size = icd->user_height * bytes_per_line; if (vb2_plane_size(vb, 0) < size) { - dev_err(icd->dev.parent, "Buffer too small (%lu < %lu)\n", + dev_err(icd->parent, "Buffer too small (%lu < %lu)\n", vb2_plane_size(vb, 0), size); return -ENOBUFS; } @@ -384,11 +385,11 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb) static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb) { struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb); - dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, + dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__, vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0)); spin_lock_irq(&pcdev->lock); @@ -409,7 +410,7 @@ static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb) static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb) { struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb); struct sh_mobile_ceu_dev *pcdev = ici->priv; @@ -421,8 +422,12 @@ static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb) pcdev->active = NULL; } - /* Doesn't hurt also if the list is empty */ - list_del_init(&buf->queue); + /* + * Doesn't hurt also if the list is empty, but it hurts, if queuing the + * buffer failed, and .buf_init() hasn't been called + */ + if (buf->queue.next) + list_del_init(&buf->queue); spin_unlock_irq(&pcdev->lock); } @@ -437,7 +442,7 @@ static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb) static int sh_mobile_ceu_stop_streaming(struct vb2_queue *q) { struct soc_camera_device *icd = container_of(q, struct soc_camera_device, vb2_vidq); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; struct list_head *buf_head, *tmp; @@ -499,25 +504,48 @@ out: return IRQ_HANDLED; } +static struct v4l2_subdev *find_csi2(struct sh_mobile_ceu_dev *pcdev) +{ + struct v4l2_subdev *sd; + + if (!pcdev->csi2_pdev) + return NULL; + + v4l2_device_for_each_subdev(sd, &pcdev->ici.v4l2_dev) + if (&pcdev->csi2_pdev->dev == v4l2_get_subdevdata(sd)) + return sd; + + return NULL; +} + /* Called with .video_lock held */ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; + struct v4l2_subdev *csi2_sd; int ret; if (pcdev->icd) return -EBUSY; - dev_info(icd->dev.parent, + dev_info(icd->parent, "SuperH Mobile CEU driver attached to camera %d\n", icd->devnum); pm_runtime_get_sync(ici->v4l2_dev.dev); ret = sh_mobile_ceu_soft_reset(pcdev); - if (!ret) + + csi2_sd = find_csi2(pcdev); + + ret = v4l2_subdev_call(csi2_sd, core, s_power, 1); + if (ret != -ENODEV && ret != -ENOIOCTLCMD && ret < 0) { + pm_runtime_put_sync(ici->v4l2_dev.dev); + } else { pcdev->icd = icd; + ret = 0; + } return ret; } @@ -525,11 +553,13 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) /* Called with .video_lock held */ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; + struct v4l2_subdev *csi2_sd = find_csi2(pcdev); BUG_ON(icd != pcdev->icd); + v4l2_subdev_call(csi2_sd, core, s_power, 0); /* disable capture, disable interrupts */ ceu_write(pcdev, CEIER, 0); sh_mobile_ceu_soft_reset(pcdev); @@ -545,7 +575,7 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) pm_runtime_put_sync(ici->v4l2_dev.dev); - dev_info(icd->dev.parent, + dev_info(icd->parent, "SuperH Mobile CEU driver detached from camera %d\n", icd->devnum); @@ -585,14 +615,14 @@ static u16 calc_scale(unsigned int src, unsigned int *dst) /* rect is guaranteed to not exceed the scaled camera rectangle */ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_cam *cam = icd->host_priv; struct sh_mobile_ceu_dev *pcdev = ici->priv; unsigned int height, width, cdwdr_width, in_width, in_height; unsigned int left_offset, top_offset; u32 camor; - dev_geo(icd->dev.parent, "Crop %ux%u@%u:%u\n", + dev_geo(icd->parent, "Crop %ux%u@%u:%u\n", icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top); left_offset = cam->ceu_left; @@ -641,7 +671,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd) } /* CSI2 special configuration */ - if (pcdev->pdata->csi2_dev) { + if (pcdev->pdata->csi2) { in_width = ((in_width - 2) * 2); left_offset *= 2; } @@ -649,7 +679,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd) /* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */ camor = left_offset | (top_offset << 16); - dev_geo(icd->dev.parent, + dev_geo(icd->parent, "CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor, (in_height << 16) | in_width, (height << 16) | width, cdwdr_width); @@ -697,7 +727,7 @@ static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr) static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; int ret; unsigned long camera_flags, common_flags, value; @@ -783,7 +813,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, value |= pcdev->is_16bit ? 1 << 12 : 0; /* CSI2 mode */ - if (pcdev->pdata->csi2_dev) + if (pcdev->pdata->csi2) value |= 3 << 12; ceu_write(pcdev, CAMCR, value); @@ -806,7 +836,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, sh_mobile_ceu_set_rect(icd); mdelay(1); - dev_geo(icd->dev.parent, "CFLCR 0x%x\n", pcdev->cflcr); + dev_geo(icd->parent, "CFLCR 0x%x\n", pcdev->cflcr); ceu_write(pcdev, CFLCR, pcdev->cflcr); /* @@ -829,7 +859,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CDOCR, value); ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ - dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n", + dev_dbg(icd->parent, "S_FMT successful for %c%c%c%c %ux%u\n", pixfmt & 0xff, (pixfmt >> 8) & 0xff, (pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff, icd->user_width, icd->user_height); @@ -843,7 +873,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd, unsigned char buswidth) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; unsigned long camera_flags, common_flags; @@ -901,7 +931,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int struct soc_camera_format_xlate *xlate) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct sh_mobile_ceu_dev *pcdev = ici->priv; int ret, k, n; @@ -921,7 +951,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int return 0; } - if (!pcdev->pdata->csi2_dev) { + if (!pcdev->pdata->csi2) { ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample); if (ret < 0) return 0; @@ -1244,7 +1274,7 @@ static int client_s_fmt(struct soc_camera_device *icd, { struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h; unsigned int max_width, max_height; struct v4l2_cropcap cap; @@ -1313,7 +1343,7 @@ static int client_scale(struct soc_camera_device *icd, bool ceu_can_scale) { struct sh_mobile_ceu_cam *cam = icd->host_priv; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; struct v4l2_mbus_framefmt mf_tmp = *mf; unsigned int scale_h, scale_v; int ret; @@ -1363,13 +1393,13 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, struct v4l2_crop *a) { struct v4l2_rect *rect = &a->c; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct sh_mobile_ceu_dev *pcdev = ici->priv; struct v4l2_crop cam_crop; struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_rect *cam_rect = &cam_crop.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct device *dev = icd->dev.parent; struct v4l2_mbus_framefmt mf; unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v, out_width, out_height; @@ -1511,7 +1541,7 @@ static void calculate_client_output(struct soc_camera_device *icd, struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf) { struct sh_mobile_ceu_cam *cam = icd->host_priv; - struct device *dev = icd->dev.parent; + struct device *dev = icd->parent; struct v4l2_rect *cam_subrect = &cam->subrect; unsigned int scale_v, scale_h; @@ -1555,12 +1585,12 @@ static void calculate_client_output(struct soc_camera_device *icd, static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct device *dev = icd->parent; + struct soc_camera_host *ici = to_soc_camera_host(dev); struct sh_mobile_ceu_dev *pcdev = ici->priv; struct sh_mobile_ceu_cam *cam = icd->host_priv; struct v4l2_pix_format *pix = &f->fmt.pix; struct v4l2_mbus_framefmt mf; - struct device *dev = icd->dev.parent; __u32 pixfmt = pix->pixelformat; const struct soc_camera_format_xlate *xlate; /* Keep Compiler Happy */ @@ -1684,12 +1714,12 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, int width, height; int ret; - dev_geo(icd->dev.parent, "TRY_FMT(pix=0x%x, %ux%u)\n", + dev_geo(icd->parent, "TRY_FMT(pix=0x%x, %ux%u)\n", pixfmt, pix->width, pix->height); xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { - dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); + dev_warn(icd->parent, "Format %x not found\n", pixfmt); return -EINVAL; } @@ -1701,11 +1731,6 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, width = pix->width; height = pix->height; - pix->bytesperline = soc_mbus_bytes_per_line(width, xlate->host_fmt); - if ((int)pix->bytesperline < 0) - return pix->bytesperline; - pix->sizeimage = height * pix->bytesperline; - /* limit to sensor capabilities */ mf.width = pix->width; mf.height = pix->height; @@ -1741,7 +1766,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ - dev_err(icd->dev.parent, + dev_err(icd->parent, "FIXME: client try_fmt() = %d\n", ret); return ret; } @@ -1753,7 +1778,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, pix->height = height; } - dev_geo(icd->dev.parent, "%s(): return %d, fmt 0x%x, %ux%u\n", + dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n", __func__, ret, pix->pixelformat, pix->width, pix->height); return ret; @@ -1763,7 +1788,7 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd, struct v4l2_crop *a) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; u32 out_width = icd->user_width, out_height = icd->user_height; int ret; @@ -1775,13 +1800,13 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd, /* Stop the client */ ret = v4l2_subdev_call(sd, video, s_stream, 0); if (ret < 0) - dev_warn(icd->dev.parent, + dev_warn(icd->parent, "Client failed to stop the stream: %d\n", ret); else /* Do the crop, if it fails, there's nothing more we can do */ sh_mobile_ceu_set_crop(icd, a); - dev_geo(icd->dev.parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height); + dev_geo(icd->parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height); if (icd->user_width != out_width || icd->user_height != out_height) { struct v4l2_format f = { @@ -1827,7 +1852,6 @@ static int sh_mobile_ceu_querycap(struct soc_camera_host *ici, struct v4l2_capability *cap) { strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card)); - cap->version = KERNEL_VERSION(0, 0, 5); cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; return 0; } @@ -1848,7 +1872,7 @@ static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q, static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd, struct v4l2_control *ctrl) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; u32 val; @@ -1864,7 +1888,7 @@ static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd, static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd, struct v4l2_control *ctrl) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; switch (ctrl->id) { @@ -1950,7 +1974,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) .completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion), .notifier.notifier_call = bus_notify, }; - struct device *csi2; + struct sh_mobile_ceu_companion *csi2; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); @@ -2023,26 +2047,61 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) pcdev->ici.drv_name = dev_name(&pdev->dev); pcdev->ici.ops = &sh_mobile_ceu_host_ops; + pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(pcdev->alloc_ctx)) { + err = PTR_ERR(pcdev->alloc_ctx); + goto exit_free_clk; + } + + err = soc_camera_host_register(&pcdev->ici); + if (err) + goto exit_free_ctx; + /* CSI2 interfacing */ - csi2 = pcdev->pdata->csi2_dev; + csi2 = pcdev->pdata->csi2; if (csi2) { - wait.dev = csi2; + struct platform_device *csi2_pdev = + platform_device_alloc("sh-mobile-csi2", csi2->id); + struct sh_csi2_pdata *csi2_pdata = csi2->platform_data; + + if (!csi2_pdev) { + err = -ENOMEM; + goto exit_host_unregister; + } + + pcdev->csi2_pdev = csi2_pdev; + + err = platform_device_add_data(csi2_pdev, csi2_pdata, sizeof(*csi2_pdata)); + if (err < 0) + goto exit_pdev_put; + + csi2_pdata = csi2_pdev->dev.platform_data; + csi2_pdata->v4l2_dev = &pcdev->ici.v4l2_dev; + + csi2_pdev->resource = csi2->resource; + csi2_pdev->num_resources = csi2->num_resources; + + err = platform_device_add(csi2_pdev); + if (err < 0) + goto exit_pdev_put; + + wait.dev = &csi2_pdev->dev; err = bus_register_notifier(&platform_bus_type, &wait.notifier); if (err < 0) - goto exit_free_clk; + goto exit_pdev_unregister; /* * From this point the driver module will not unload, until * we complete the completion. */ - if (!csi2->driver) { + if (!csi2_pdev->dev.driver) { complete(&wait.completion); /* Either too late, or probing failed */ bus_unregister_notifier(&platform_bus_type, &wait.notifier); err = -ENXIO; - goto exit_free_clk; + goto exit_pdev_unregister; } /* @@ -2051,34 +2110,28 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) * the "owner" is safe! */ - err = try_module_get(csi2->driver->owner); + err = try_module_get(csi2_pdev->dev.driver->owner); /* Let notifier complete, if it has been locked */ complete(&wait.completion); bus_unregister_notifier(&platform_bus_type, &wait.notifier); if (!err) { err = -ENODEV; - goto exit_free_clk; + goto exit_pdev_unregister; } } - pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); - if (IS_ERR(pcdev->alloc_ctx)) { - err = PTR_ERR(pcdev->alloc_ctx); - goto exit_module_put; - } - - err = soc_camera_host_register(&pcdev->ici); - if (err) - goto exit_free_ctx; - return 0; +exit_pdev_unregister: + platform_device_del(pcdev->csi2_pdev); +exit_pdev_put: + pcdev->csi2_pdev->resource = NULL; + platform_device_put(pcdev->csi2_pdev); +exit_host_unregister: + soc_camera_host_unregister(&pcdev->ici); exit_free_ctx: vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); -exit_module_put: - if (csi2 && csi2->driver) - module_put(csi2->driver->owner); exit_free_clk: pm_runtime_disable(&pdev->dev); free_irq(pcdev->irq, pcdev); @@ -2098,7 +2151,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); struct sh_mobile_ceu_dev *pcdev = container_of(soc_host, struct sh_mobile_ceu_dev, ici); - struct device *csi2 = pcdev->pdata->csi2_dev; + struct platform_device *csi2_pdev = pcdev->csi2_pdev; soc_camera_host_unregister(soc_host); pm_runtime_disable(&pdev->dev); @@ -2107,8 +2160,13 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) dma_release_declared_memory(&pdev->dev); iounmap(pcdev->base); vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx); - if (csi2 && csi2->driver) - module_put(csi2->driver->owner); + if (csi2_pdev && csi2_pdev->dev.driver) { + struct module *csi2_drv = csi2_pdev->dev.driver->owner; + platform_device_del(csi2_pdev); + csi2_pdev->resource = NULL; + platform_device_put(csi2_pdev); + module_put(csi2_drv); + } kfree(pcdev); return 0; @@ -2158,4 +2216,5 @@ module_exit(sh_mobile_ceu_exit); MODULE_DESCRIPTION("SuperH Mobile CEU driver"); MODULE_AUTHOR("Magnus Damm"); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.6"); MODULE_ALIAS("platform:sh_mobile_ceu"); diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index 98b8748..2893a01 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/videodev2.h> +#include <media/sh_mobile_ceu.h> #include <media/sh_mobile_csi2.h> #include <media/soc_camera.h> #include <media/v4l2-common.h> @@ -33,7 +34,6 @@ struct sh_csi2 { struct v4l2_subdev subdev; struct list_head list; - struct notifier_block notifier; unsigned int irq; void __iomem *base; struct platform_device *pdev; @@ -132,13 +132,6 @@ static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = { .try_mbus_fmt = sh_csi2_try_fmt, }; -static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops; - -static struct v4l2_subdev_ops sh_csi2_subdev_ops = { - .core = &sh_csi2_subdev_core_ops, - .video = &sh_csi2_subdev_video_ops, -}; - static void sh_csi2_hwinit(struct sh_csi2 *priv) { struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; @@ -186,65 +179,84 @@ static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd) return soc_camera_apply_sensor_flags(icl, flags); } -static int sh_csi2_notify(struct notifier_block *nb, - unsigned long action, void *data) +static int sh_csi2_client_connect(struct sh_csi2 *priv) { - struct device *dev = data; - struct soc_camera_device *icd = to_soc_camera_dev(dev); - struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent); - struct sh_csi2 *priv = - container_of(nb, struct sh_csi2, notifier); struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; - int ret, i; + struct v4l2_subdev *sd, *csi2_sd = &priv->subdev; + struct soc_camera_device *icd = NULL; + struct device *dev = v4l2_get_subdevdata(&priv->subdev); + int i; + + v4l2_device_for_each_subdev(sd, csi2_sd->v4l2_dev) + if (sd->grp_id) { + icd = (struct soc_camera_device *)sd->grp_id; + break; + } + + if (!icd) + return -EINVAL; for (i = 0; i < pdata->num_clients; i++) if (&pdata->clients[i].pdev->dev == icd->pdev) break; - dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i); + dev_dbg(dev, "%s(%p): found #%d\n", __func__, dev, i); if (i == pdata->num_clients) - return NOTIFY_DONE; + return -ENODEV; - switch (action) { - case BUS_NOTIFY_BOUND_DRIVER: - snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s", - dev_name(v4l2_dev->dev), ".mipi-csi"); - priv->subdev.grp_id = (long)icd; - ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev); - dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); - if (ret < 0) - return NOTIFY_DONE; + priv->client = pdata->clients + i; - priv->client = pdata->clients + i; + priv->set_bus_param = icd->ops->set_bus_param; + priv->query_bus_param = icd->ops->query_bus_param; + icd->ops->set_bus_param = sh_csi2_set_bus_param; + icd->ops->query_bus_param = sh_csi2_query_bus_param; - priv->set_bus_param = icd->ops->set_bus_param; - priv->query_bus_param = icd->ops->query_bus_param; - icd->ops->set_bus_param = sh_csi2_set_bus_param; - icd->ops->query_bus_param = sh_csi2_query_bus_param; + csi2_sd->grp_id = (long)icd; - pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev)); + pm_runtime_get_sync(dev); - sh_csi2_hwinit(priv); - break; - case BUS_NOTIFY_UNBIND_DRIVER: - priv->client = NULL; + sh_csi2_hwinit(priv); - /* Driver is about to be unbound */ - icd->ops->set_bus_param = priv->set_bus_param; - icd->ops->query_bus_param = priv->query_bus_param; - priv->set_bus_param = NULL; - priv->query_bus_param = NULL; + return 0; +} - v4l2_device_unregister_subdev(&priv->subdev); +static void sh_csi2_client_disconnect(struct sh_csi2 *priv) +{ + struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id; - pm_runtime_put(v4l2_get_subdevdata(&priv->subdev)); - break; - } + priv->client = NULL; + priv->subdev.grp_id = 0; - return NOTIFY_OK; + /* Driver is about to be unbound */ + icd->ops->set_bus_param = priv->set_bus_param; + icd->ops->query_bus_param = priv->query_bus_param; + priv->set_bus_param = NULL; + priv->query_bus_param = NULL; + + pm_runtime_put(v4l2_get_subdevdata(&priv->subdev)); } +static int sh_csi2_s_power(struct v4l2_subdev *sd, int on) +{ + struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); + + if (on) + return sh_csi2_client_connect(priv); + + sh_csi2_client_disconnect(priv); + return 0; +} + +static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops = { + .s_power = sh_csi2_s_power, +}; + +static struct v4l2_subdev_ops sh_csi2_subdev_ops = { + .core = &sh_csi2_subdev_core_ops, + .video = &sh_csi2_subdev_video_ops, +}; + static __devinit int sh_csi2_probe(struct platform_device *pdev) { struct resource *res; @@ -274,14 +286,6 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev) return -ENOMEM; priv->irq = irq; - priv->notifier.notifier_call = sh_csi2_notify; - - /* We MUST attach after the MIPI sensor */ - ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier); - if (ret < 0) { - dev_err(&pdev->dev, "CSI2 cannot register notifier\n"); - goto ernotify; - } if (!request_mem_region(res->start, resource_size(res), pdev->name)) { dev_err(&pdev->dev, "CSI2 register region already claimed\n"); @@ -297,11 +301,17 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev) } priv->pdev = pdev; + platform_set_drvdata(pdev, priv); v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops); v4l2_set_subdevdata(&priv->subdev, &pdev->dev); - platform_set_drvdata(pdev, priv); + snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.mipi-csi", + dev_name(pdata->v4l2_dev->dev)); + ret = v4l2_device_register_subdev(pdata->v4l2_dev, &priv->subdev); + dev_dbg(&pdev->dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); + if (ret < 0) + goto esdreg; pm_runtime_enable(&pdev->dev); @@ -309,11 +319,11 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev) return 0; +esdreg: + iounmap(priv->base); eremap: release_mem_region(res->start, resource_size(res)); ereqreg: - bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); -ernotify: kfree(priv); return ret; @@ -324,7 +334,7 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev) struct sh_csi2 *priv = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier); + v4l2_device_unregister_subdev(&priv->subdev); pm_runtime_disable(&pdev->dev); iounmap(priv->base); release_mem_region(res->start, resource_size(res)); @@ -335,8 +345,9 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev) } static struct platform_driver __refdata sh_csi2_pdrv = { - .remove = __devexit_p(sh_csi2_remove), - .driver = { + .remove = __devexit_p(sh_csi2_remove), + .probe = sh_csi2_probe, + .driver = { .name = "sh-mobile-csi2", .owner = THIS_MODULE, }, @@ -344,7 +355,7 @@ static struct platform_driver __refdata sh_csi2_pdrv = { static int __init sh_csi2_init(void) { - return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe); + return platform_driver_register(&sh_csi2_pdrv); } static void __exit sh_csi2_exit(void) diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c index 07cf0c6..6a72987 100644 --- a/drivers/media/video/sh_vou.c +++ b/drivers/media/video/sh_vou.c @@ -19,7 +19,6 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <media/sh_vou.h> @@ -393,7 +392,6 @@ static int sh_vou_querycap(struct file *file, void *priv, dev_dbg(vou_file->vbq.dev, "%s()\n", __func__); strlcpy(cap->card, "SuperH VOU", sizeof(cap->card)); - cap->version = KERNEL_VERSION(0, 1, 0); cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; return 0; } @@ -1490,4 +1488,5 @@ module_exit(sh_vou_exit); MODULE_DESCRIPTION("SuperH VOU driver"); MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1.0"); MODULE_ALIAS("platform:sh-vou"); diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h index cbfc444..22ea211 100644 --- a/drivers/media/video/sn9c102/sn9c102.h +++ b/drivers/media/video/sn9c102/sn9c102.h @@ -21,7 +21,6 @@ #ifndef _SN9C102_H_ #define _SN9C102_H_ -#include <linux/version.h> #include <linux/usb.h> #include <linux/videodev2.h> #include <media/v4l2-common.h> diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 0e07c49..16cb07c5 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -33,6 +33,7 @@ #include <linux/stat.h> #include <linux/mm.h> #include <linux/vmalloc.h> +#include <linux/version.h> #include <linux/page-flags.h> #include <asm/byteorder.h> #include <asm/page.h> @@ -47,8 +48,7 @@ #define SN9C102_MODULE_AUTHOR "(C) 2004-2007 Luca Risolia" #define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" #define SN9C102_MODULE_LICENSE "GPL" -#define SN9C102_MODULE_VERSION "1:1.47pre49" -#define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 1, 47) +#define SN9C102_MODULE_VERSION "1:1.48" /*****************************************************************************/ @@ -2158,7 +2158,7 @@ sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg) { struct v4l2_capability cap = { .driver = "sn9c102", - .version = SN9C102_MODULE_VERSION_CODE, + .version = LINUX_VERSION_CODE, .capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING, }; @@ -3187,16 +3187,8 @@ static long sn9c102_ioctl_v4l2(struct file *filp, case VIDIOC_S_AUDIO: return sn9c102_vidioc_s_audio(cam, arg); - case VIDIOC_G_STD: - case VIDIOC_S_STD: - case VIDIOC_QUERYSTD: - case VIDIOC_ENUMSTD: - case VIDIOC_QUERYMENU: - case VIDIOC_ENUM_FRAMEINTERVALS: - return -EINVAL; - default: - return -EINVAL; + return -ENOTTY; } } diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 4e4d412..5bdfe7e 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -60,14 +60,14 @@ static int soc_camera_power_set(struct soc_camera_device *icd, ret = regulator_bulk_enable(icl->num_regulators, icl->regulators); if (ret < 0) { - dev_err(&icd->dev, "Cannot enable regulators\n"); + dev_err(icd->pdev, "Cannot enable regulators\n"); return ret; } if (icl->power) ret = icl->power(icd->pdev, power_on); if (ret < 0) { - dev_err(&icd->dev, + dev_err(icd->pdev, "Platform failed to power-on the camera.\n"); regulator_bulk_disable(icl->num_regulators, @@ -79,7 +79,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd, if (icl->power) ret = icl->power(icd->pdev, 0); if (ret < 0) { - dev_err(&icd->dev, + dev_err(icd->pdev, "Platform failed to power-off the camera.\n"); return ret; } @@ -87,7 +87,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd, ret = regulator_bulk_disable(icl->num_regulators, icl->regulators); if (ret < 0) { - dev_err(&icd->dev, "Cannot disable regulators\n"); + dev_err(icd->pdev, "Cannot disable regulators\n"); return ret; } } @@ -147,11 +147,11 @@ EXPORT_SYMBOL(soc_camera_apply_sensor_flags); static int soc_camera_try_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_pix_format *pix = &f->fmt.pix; int ret; - dev_dbg(&icd->dev, "TRY_FMT(%c%c%c%c, %ux%u)\n", + dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n", pixfmtstr(pix->pixelformat), pix->width, pix->height); pix->bytesperline = 0; @@ -199,22 +199,15 @@ static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv, static int soc_camera_enum_input(struct file *file, void *priv, struct v4l2_input *inp) { - struct soc_camera_device *icd = file->private_data; - int ret = 0; - if (inp->index != 0) return -EINVAL; - if (icd->ops->enum_input) - ret = icd->ops->enum_input(icd, inp); - else { - /* default is camera */ - inp->type = V4L2_INPUT_TYPE_CAMERA; - inp->std = V4L2_STD_UNKNOWN; - strcpy(inp->name, "Camera"); - } + /* default is camera */ + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = V4L2_STD_UNKNOWN; + strcpy(inp->name, "Camera"); - return ret; + return 0; } static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i) @@ -244,7 +237,7 @@ static int soc_camera_enum_fsizes(struct file *file, void *fh, struct v4l2_frmsizeenum *fsize) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); return ici->ops->enum_fsizes(icd, fsize); } @@ -254,7 +247,7 @@ static int soc_camera_reqbufs(struct file *file, void *priv, { int ret; struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -281,7 +274,7 @@ static int soc_camera_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -295,7 +288,7 @@ static int soc_camera_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -312,7 +305,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -329,7 +322,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv, static int soc_camera_init_user_formats(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); unsigned int i, fmts = 0, raw_fmts = 0; int ret; enum v4l2_mbus_pixelcode code; @@ -363,7 +356,7 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd) if (!icd->user_formats) return -ENOMEM; - dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts); + dev_dbg(icd->pdev, "Found %d supported formats.\n", fmts); /* Second pass - actually fill data formats */ fmts = 0; @@ -395,7 +388,7 @@ egfmt: /* Always entered with .video_lock held */ static void soc_camera_free_user_formats(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); if (ici->ops->put_formats) ici->ops->put_formats(icd); @@ -409,11 +402,11 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd) static int soc_camera_set_fmt(struct soc_camera_device *icd, struct v4l2_format *f) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_pix_format *pix = &f->fmt.pix; int ret; - dev_dbg(&icd->dev, "S_FMT(%c%c%c%c, %ux%u)\n", + dev_dbg(icd->pdev, "S_FMT(%c%c%c%c, %ux%u)\n", pixfmtstr(pix->pixelformat), pix->width, pix->height); /* We always call try_fmt() before set_fmt() or set_crop() */ @@ -426,7 +419,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, return ret; } else if (!icd->current_fmt || icd->current_fmt->host_fmt->fourcc != pix->pixelformat) { - dev_err(&icd->dev, + dev_err(icd->pdev, "Host driver hasn't set up current format correctly!\n"); return -EINVAL; } @@ -440,7 +433,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, if (ici->ops->init_videobuf) icd->vb_vidq.field = pix->field; - dev_dbg(&icd->dev, "set width: %d height: %d\n", + dev_dbg(icd->pdev, "set width: %d height: %d\n", icd->user_width, icd->user_height); /* set physical bus parameters */ @@ -450,9 +443,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd, static int soc_camera_open(struct file *file) { struct video_device *vdev = video_devdata(file); - struct soc_camera_device *icd = container_of(vdev->parent, - struct soc_camera_device, - dev); + struct soc_camera_device *icd = dev_get_drvdata(vdev->parent); struct soc_camera_link *icl = to_soc_camera_link(icd); struct soc_camera_host *ici; int ret; @@ -461,10 +452,10 @@ static int soc_camera_open(struct file *file) /* No device driver attached */ return -ENODEV; - ici = to_soc_camera_host(icd->dev.parent); + ici = to_soc_camera_host(icd->parent); if (!try_module_get(ici->ops->owner)) { - dev_err(&icd->dev, "Couldn't lock capture bus driver.\n"); + dev_err(icd->pdev, "Couldn't lock capture bus driver.\n"); return -EINVAL; } @@ -495,7 +486,7 @@ static int soc_camera_open(struct file *file) ret = ici->ops->add(icd); if (ret < 0) { - dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret); + dev_err(icd->pdev, "Couldn't activate the camera: %d\n", ret); goto eiciadd; } @@ -524,7 +515,7 @@ static int soc_camera_open(struct file *file) } file->private_data = icd; - dev_dbg(&icd->dev, "camera device open\n"); + dev_dbg(icd->pdev, "camera device open\n"); return 0; @@ -549,7 +540,7 @@ epower: static int soc_camera_close(struct file *file) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); icd->use_count--; if (!icd->use_count) { @@ -570,7 +561,7 @@ static int soc_camera_close(struct file *file) module_put(ici->ops->owner); - dev_dbg(&icd->dev, "camera device close\n"); + dev_dbg(icd->pdev, "camera device close\n"); return 0; } @@ -581,7 +572,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf, struct soc_camera_device *icd = file->private_data; int err = -EINVAL; - dev_err(&icd->dev, "camera device read not implemented\n"); + dev_err(icd->pdev, "camera device read not implemented\n"); return err; } @@ -589,10 +580,10 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf, static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); int err; - dev_dbg(&icd->dev, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + dev_dbg(icd->pdev, "mmap called, vma=0x%08lx\n", (unsigned long)vma); if (icd->streamer != file) return -EBUSY; @@ -602,7 +593,7 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) else err = vb2_mmap(&icd->vb2_vidq, vma); - dev_dbg(&icd->dev, "vma start=0x%08lx, size=%ld, ret=%d\n", + dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, (unsigned long)vma->vm_end - (unsigned long)vma->vm_start, err); @@ -613,13 +604,13 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma) static unsigned int soc_camera_poll(struct file *file, poll_table *pt) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); if (icd->streamer != file) return -EBUSY; if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) { - dev_err(&icd->dev, "Trying to poll with no queued buffers!\n"); + dev_err(icd->pdev, "Trying to poll with no queued buffers!\n"); return POLLERR; } @@ -659,15 +650,15 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv, WARN_ON(priv != file->private_data); if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { - dev_warn(&icd->dev, "Wrong buf-type %d\n", f->type); + dev_warn(icd->pdev, "Wrong buf-type %d\n", f->type); return -EINVAL; } if (icd->streamer && icd->streamer != file) return -EBUSY; - if (is_streaming(to_soc_camera_host(icd->dev.parent), icd)) { - dev_err(&icd->dev, "S_FMT denied: queue initialised\n"); + if (is_streaming(to_soc_camera_host(icd->parent), icd)) { + dev_err(icd->pdev, "S_FMT denied: queue initialised\n"); return -EBUSY; } @@ -716,7 +707,7 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv, pix->field = icd->field; pix->pixelformat = icd->current_fmt->host_fmt->fourcc; pix->colorspace = icd->colorspace; - dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n", + dev_dbg(icd->pdev, "current_fmt->fourcc: 0x%08x\n", icd->current_fmt->host_fmt->fourcc); return 0; } @@ -725,7 +716,7 @@ static int soc_camera_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -737,7 +728,7 @@ static int soc_camera_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret; @@ -766,7 +757,7 @@ static int soc_camera_streamoff(struct file *file, void *priv, { struct soc_camera_device *icd = file->private_data; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); WARN_ON(priv != file->private_data); @@ -794,7 +785,7 @@ static int soc_camera_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); int i; WARN_ON(priv != file->private_data); @@ -825,7 +816,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret; @@ -844,7 +835,7 @@ static int soc_camera_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_subdev *sd = soc_camera_to_subdev(icd); int ret; @@ -863,7 +854,7 @@ static int soc_camera_cropcap(struct file *file, void *fh, struct v4l2_cropcap *a) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); return ici->ops->cropcap(icd, a); } @@ -872,7 +863,7 @@ static int soc_camera_g_crop(struct file *file, void *fh, struct v4l2_crop *a) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); int ret; ret = ici->ops->get_crop(icd, a); @@ -889,7 +880,7 @@ static int soc_camera_s_crop(struct file *file, void *fh, struct v4l2_crop *a) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct v4l2_rect *rect = &a->c; struct v4l2_crop current_crop; int ret; @@ -897,7 +888,7 @@ static int soc_camera_s_crop(struct file *file, void *fh, if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n", + dev_dbg(icd->pdev, "S_CROP(%ux%u@%u:%u)\n", rect->width, rect->height, rect->left, rect->top); /* If get_crop fails, we'll let host and / or client drivers decide */ @@ -905,7 +896,7 @@ static int soc_camera_s_crop(struct file *file, void *fh, /* Prohibit window size change with initialised buffers */ if (ret < 0) { - dev_err(&icd->dev, + dev_err(icd->pdev, "S_CROP denied: getting current crop failed\n"); } else if ((a->c.width == current_crop.c.width && a->c.height == current_crop.c.height) || @@ -915,7 +906,7 @@ static int soc_camera_s_crop(struct file *file, void *fh, } else if (ici->ops->set_livecrop) { ret = ici->ops->set_livecrop(icd, a); } else { - dev_err(&icd->dev, + dev_err(icd->pdev, "S_CROP denied: queue initialised and sizes differ\n"); ret = -EBUSY; } @@ -927,7 +918,7 @@ static int soc_camera_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); if (ici->ops->get_parm) return ici->ops->get_parm(icd, a); @@ -939,7 +930,7 @@ static int soc_camera_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) { struct soc_camera_device *icd = file->private_data; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); if (ici->ops->set_parm) return ici->ops->set_parm(icd, a); @@ -976,6 +967,8 @@ static int soc_camera_s_register(struct file *file, void *fh, } #endif +static int soc_camera_probe(struct soc_camera_device *icd); + /* So far this function cannot fail */ static void scan_add_host(struct soc_camera_host *ici) { @@ -986,15 +979,9 @@ static void scan_add_host(struct soc_camera_host *ici) list_for_each_entry(icd, &devices, list) { if (icd->iface == ici->nr) { int ret; - icd->dev.parent = ici->v4l2_dev.dev; - dev_set_name(&icd->dev, "%u-%u", icd->iface, - icd->devnum); - ret = device_register(&icd->dev); - if (ret < 0) { - icd->dev.parent = NULL; - dev_err(&icd->dev, - "Cannot register device: %d\n", ret); - } + + icd->parent = ici->v4l2_dev.dev; + ret = soc_camera_probe(icd); } } @@ -1006,12 +993,12 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd, struct soc_camera_link *icl) { struct i2c_client *client; - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id); struct v4l2_subdev *subdev; if (!adap) { - dev_err(&icd->dev, "Cannot get I2C adapter #%d. No driver?\n", + dev_err(icd->pdev, "Cannot get I2C adapter #%d. No driver?\n", icl->i2c_adapter_id); goto ei2cga; } @@ -1026,7 +1013,7 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd, client = v4l2_get_subdevdata(subdev); /* Use to_i2c_client(dev) to recover the i2c client */ - dev_set_drvdata(&icd->dev, &client->dev); + icd->control = &client->dev; return 0; ei2cnd: @@ -1040,7 +1027,8 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd) struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); struct i2c_adapter *adap = client->adapter; - dev_set_drvdata(&icd->dev, NULL); + + icd->control = NULL; v4l2_device_unregister_subdev(i2c_get_clientdata(client)); i2c_unregister_device(client); i2c_put_adapter(adap); @@ -1053,17 +1041,16 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd) static int soc_camera_video_start(struct soc_camera_device *icd); static int video_dev_create(struct soc_camera_device *icd); /* Called during host-driver probe */ -static int soc_camera_probe(struct device *dev) +static int soc_camera_probe(struct soc_camera_device *icd) { - struct soc_camera_device *icd = to_soc_camera_dev(dev); - struct soc_camera_host *ici = to_soc_camera_host(dev->parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct soc_camera_link *icl = to_soc_camera_link(icd); struct device *control = NULL; struct v4l2_subdev *sd; struct v4l2_mbus_framefmt mf; int ret; - dev_info(dev, "Probing %s\n", dev_name(dev)); + dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev)); ret = regulator_bulk_get(icd->pdev, icl->num_regulators, icl->regulators); @@ -1099,7 +1086,7 @@ static int soc_camera_probe(struct device *dev) if (icl->module_name) ret = request_module(icl->module_name); - ret = icl->add_device(icl, &icd->dev); + ret = icl->add_device(icd); if (ret < 0) goto eadddev; @@ -1110,7 +1097,7 @@ static int soc_camera_probe(struct device *dev) control = to_soc_camera_control(icd); if (!control || !control->driver || !dev_get_drvdata(control) || !try_module_get(control->driver->owner)) { - icl->del_device(icl); + icl->del_device(icd); goto enodrv; } } @@ -1125,8 +1112,6 @@ static int soc_camera_probe(struct device *dev) icd->field = V4L2_FIELD_ANY; - icd->vdev->lock = &icd->video_lock; - /* * ..._video_start() will create a device node, video_register_device() * itself is protected against concurrent open() calls, but we also have @@ -1146,11 +1131,6 @@ static int soc_camera_probe(struct device *dev) icd->field = mf.field; } - /* Do we have to sysfs_remove_link() before device_unregister()? */ - if (sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj, - "control")) - dev_warn(&icd->dev, "Failed creating the control symlink\n"); - ici->ops->remove(icd); soc_camera_power_set(icd, icl, 0); @@ -1166,7 +1146,7 @@ eiufmt: if (icl->board_info) { soc_camera_free_i2c(icd); } else { - icl->del_device(icl); + icl->del_device(icd); module_put(control->driver->owner); } enodrv: @@ -1186,13 +1166,12 @@ ereg: * This is called on device_unregister, which only means we have to disconnect * from the host, but not remove ourselves from the device list */ -static int soc_camera_remove(struct device *dev) +static int soc_camera_remove(struct soc_camera_device *icd) { - struct soc_camera_device *icd = to_soc_camera_dev(dev); struct soc_camera_link *icl = to_soc_camera_link(icd); struct video_device *vdev = icd->vdev; - BUG_ON(!dev->parent); + BUG_ON(!icd->parent); if (vdev) { video_unregister_device(vdev); @@ -1202,10 +1181,9 @@ static int soc_camera_remove(struct device *dev) if (icl->board_info) { soc_camera_free_i2c(icd); } else { - struct device_driver *drv = to_soc_camera_control(icd) ? - to_soc_camera_control(icd)->driver : NULL; + struct device_driver *drv = to_soc_camera_control(icd)->driver; if (drv) { - icl->del_device(icl); + icl->del_device(icd); module_put(drv->owner); } } @@ -1216,49 +1194,6 @@ static int soc_camera_remove(struct device *dev) return 0; } -static int soc_camera_suspend(struct device *dev, pm_message_t state) -{ - struct soc_camera_device *icd = to_soc_camera_dev(dev); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - int ret = 0; - - if (ici->ops->suspend) - ret = ici->ops->suspend(icd, state); - - return ret; -} - -static int soc_camera_resume(struct device *dev) -{ - struct soc_camera_device *icd = to_soc_camera_dev(dev); - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); - int ret = 0; - - if (ici->ops->resume) - ret = ici->ops->resume(icd); - - return ret; -} - -struct bus_type soc_camera_bus_type = { - .name = "soc-camera", - .probe = soc_camera_probe, - .remove = soc_camera_remove, - .suspend = soc_camera_suspend, - .resume = soc_camera_resume, -}; -EXPORT_SYMBOL_GPL(soc_camera_bus_type); - -static struct device_driver ic_drv = { - .name = "camera", - .bus = &soc_camera_bus_type, - .owner = THIS_MODULE, -}; - -static void dummy_release(struct device *dev) -{ -} - static int default_cropcap(struct soc_camera_device *icd, struct v4l2_cropcap *a) { @@ -1317,13 +1252,6 @@ static int default_enum_fsizes(struct soc_camera_device *icd, return 0; } -static void soc_camera_device_init(struct device *dev, void *pdata) -{ - dev->platform_data = pdata; - dev->bus = &soc_camera_bus_type; - dev->release = dummy_release; -} - int soc_camera_host_register(struct soc_camera_host *ici) { struct soc_camera_host *ix; @@ -1389,24 +1317,9 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) mutex_lock(&list_lock); list_del(&ici->list); - - list_for_each_entry(icd, &devices, list) { - if (icd->iface == ici->nr) { - void *pdata = icd->dev.platform_data; - /* The bus->remove will be called */ - device_unregister(&icd->dev); - /* - * Not before device_unregister(), .remove - * needs parent to call ici->ops->remove(). - * If the host module is loaded again, device_register() - * would complain "already initialised," since 2.6.32 - * this is also needed to prevent use-after-free of the - * device private data. - */ - memset(&icd->dev, 0, sizeof(icd->dev)); - soc_camera_device_init(&icd->dev, pdata); - } - } + list_for_each_entry(icd, &devices, list) + if (icd->iface == ici->nr && to_soc_camera_control(icd)) + soc_camera_remove(icd); mutex_unlock(&list_lock); @@ -1448,11 +1361,6 @@ static int soc_camera_device_register(struct soc_camera_device *icd) return 0; } -static void soc_camera_device_unregister(struct soc_camera_device *icd) -{ - list_del(&icd->list); -} - static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = { .vidioc_querycap = soc_camera_querycap, .vidioc_g_fmt_vid_cap = soc_camera_g_fmt_vid_cap, @@ -1487,7 +1395,7 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = { static int video_dev_create(struct soc_camera_device *icd) { - struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct video_device *vdev = video_device_alloc(); if (!vdev) @@ -1495,12 +1403,13 @@ static int video_dev_create(struct soc_camera_device *icd) strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name)); - vdev->parent = &icd->dev; + vdev->parent = icd->pdev; vdev->current_norm = V4L2_STD_UNKNOWN; vdev->fops = &soc_camera_fops; vdev->ioctl_ops = &soc_camera_ioctl_ops; vdev->release = video_device_release; vdev->tvnorms = V4L2_STD_UNKNOWN; + vdev->lock = &icd->video_lock; icd->vdev = vdev; @@ -1515,7 +1424,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd) const struct device_type *type = icd->vdev->dev.type; int ret; - if (!icd->dev.parent) + if (!icd->parent) return -ENODEV; if (!icd->ops || @@ -1525,7 +1434,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd) ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, -1); if (ret < 0) { - dev_err(&icd->dev, "video_register_device failed: %d\n", ret); + dev_err(icd->pdev, "video_register_device failed: %d\n", ret); return ret; } @@ -1549,6 +1458,7 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev) return -ENOMEM; icd->iface = icl->bus_id; + icd->link = icl; icd->pdev = &pdev->dev; platform_set_drvdata(pdev, icd); @@ -1556,8 +1466,6 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev) if (ret < 0) goto escdevreg; - soc_camera_device_init(&icd->dev, icl); - icd->user_width = DEFAULT_WIDTH; icd->user_height = DEFAULT_HEIGHT; @@ -1581,7 +1489,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev) if (!icd) return -EINVAL; - soc_camera_device_unregister(icd); + list_del(&icd->list); kfree(icd); @@ -1598,31 +1506,12 @@ static struct platform_driver __refdata soc_camera_pdrv = { static int __init soc_camera_init(void) { - int ret = bus_register(&soc_camera_bus_type); - if (ret) - return ret; - ret = driver_register(&ic_drv); - if (ret) - goto edrvr; - - ret = platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe); - if (ret) - goto epdr; - - return 0; - -epdr: - driver_unregister(&ic_drv); -edrvr: - bus_unregister(&soc_camera_bus_type); - return ret; + return platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe); } static void __exit soc_camera_exit(void) { platform_driver_unregister(&soc_camera_pdrv); - driver_unregister(&ic_drv); - bus_unregister(&soc_camera_bus_type); } module_init(soc_camera_init); diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index bf406e8..8069cd6 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -146,7 +146,7 @@ static int soc_camera_platform_probe(struct platform_device *pdev) if (!p) return -EINVAL; - if (!p->dev) { + if (!p->icd) { dev_err(&pdev->dev, "Platform has not set soc_camera_device pointer!\n"); return -EINVAL; @@ -156,16 +156,16 @@ static int soc_camera_platform_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - icd = to_soc_camera_dev(p->dev); + icd = p->icd; /* soc-camera convention: control's drvdata points to the subdev */ platform_set_drvdata(pdev, &priv->subdev); /* Set the control device reference */ - dev_set_drvdata(&icd->dev, &pdev->dev); + icd->control = &pdev->dev; icd->ops = &soc_camera_platform_ops; - ici = to_soc_camera_host(icd->dev.parent); + ici = to_soc_camera_host(icd->parent); v4l2_subdev_init(&priv->subdev, &platform_subdev_ops); v4l2_set_subdevdata(&priv->subdev, p); @@ -188,7 +188,7 @@ static int soc_camera_platform_remove(struct platform_device *pdev) { struct soc_camera_platform_priv *priv = get_priv(pdev); struct soc_camera_platform_info *p = pdev->dev.platform_data; - struct soc_camera_device *icd = to_soc_camera_dev(p->dev); + struct soc_camera_device *icd = p->icd; v4l2_device_unregister_subdev(&priv->subdev); icd->ops = NULL; diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c index c901721..8afb0e8 100644 --- a/drivers/media/video/sr030pc30.c +++ b/drivers/media/video/sr030pc30.c @@ -726,8 +726,10 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) const struct sr030pc30_platform_data *pdata = info->pdata; int ret; - if (WARN(pdata == NULL, "No platform data!\n")) - return -ENOMEM; + if (pdata == NULL) { + WARN(1, "No platform data!\n"); + return -EINVAL; + } /* * Put sensor into power sleep mode before switching off @@ -746,6 +748,7 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) if (on) { ret = sr030pc30_base_config(sd); } else { + ret = 0; info->curr_win = NULL; info->curr_fmt = NULL; } diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index 3941f95..bd21854 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -49,10 +49,11 @@ static int maxvol; static int loudness; /* disable loudness by default */ static int debug; /* insmod parameter */ module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0)."); module_param(loudness, int, S_IRUGO); -MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)"); +MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0)."); module_param(maxvol, int, S_IRUGO | S_IWUSR); - +MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0)."); /* Structure of address and subaddresses for the tda7432 */ diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c index fc611eb..84cd1b6 100644 --- a/drivers/media/video/timblogiw.c +++ b/drivers/media/video/timblogiw.c @@ -20,7 +20,6 @@ * Timberdale FPGA LogiWin Video In */ -#include <linux/version.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dmaengine.h> diff --git a/drivers/media/video/tlg2300/pd-common.h b/drivers/media/video/tlg2300/pd-common.h index 46066bd..56564e6 100644 --- a/drivers/media/video/tlg2300/pd-common.h +++ b/drivers/media/video/tlg2300/pd-common.h @@ -1,7 +1,6 @@ #ifndef PD_COMMON_H #define PD_COMMON_H -#include <linux/version.h> #include <linux/fs.h> #include <linux/wait.h> #include <linux/list.h> diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c index 99c81a9..129f135 100644 --- a/drivers/media/video/tlg2300/pd-main.c +++ b/drivers/media/video/tlg2300/pd-main.c @@ -531,3 +531,4 @@ module_exit(poseidon_exit); MODULE_AUTHOR("Telegent Systems"); MODULE_DESCRIPTION("For tlg2300-based USB device "); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.0.2"); diff --git a/drivers/media/video/tlg2300/pd-radio.c b/drivers/media/video/tlg2300/pd-radio.c index fae84c2..4fad1df 100644 --- a/drivers/media/video/tlg2300/pd-radio.c +++ b/drivers/media/video/tlg2300/pd-radio.c @@ -6,7 +6,6 @@ #include <linux/usb.h> #include <linux/i2c.h> #include <media/v4l2-dev.h> -#include <linux/version.h> #include <linux/mm.h> #include <linux/mutex.h> #include <media/v4l2-ioctl.h> @@ -149,7 +148,6 @@ static int vidioc_querycap(struct file *file, void *priv, strlcpy(v->driver, "tele-radio", sizeof(v->driver)); strlcpy(v->card, "Telegent Poseidon", sizeof(v->card)); usb_make_path(p->udev, v->bus_info, sizeof(v->bus_info)); - v->version = KERNEL_VERSION(0, 0, 1); v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; return 0; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index a03945a..11cc980 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -39,6 +39,7 @@ #include "tda9887.h" #include "xc5000.h" #include "tda18271.h" +#include "xc4000.h" #define UNSET (-1U) @@ -391,6 +392,23 @@ static void set_type(struct i2c_client *c, unsigned int type, tune_now = 0; break; } + case TUNER_XC4000: + { + struct xc4000_config xc4000_cfg = { + .i2c_address = t->i2c->addr, + /* FIXME: the correct parameters will be set */ + /* only when the digital dvb_attach() occurs */ + .default_pm = 0, + .dvb_amplitude = 0, + .set_smoothedcvbs = 0, + .if_khz = 0 + }; + if (!dvb_attach(xc4000_attach, + &t->fe, t->i2c->adapter, &xc4000_cfg)) + goto attach_failed; + tune_now = 0; + break; + } default: if (!dvb_attach(simple_tuner_attach, &t->fe, t->i2c->adapter, t->i2c->addr, t->type)) diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c index 0347bbe..742482e 100644 --- a/drivers/media/video/tw9910.c +++ b/drivers/media/video/tw9910.c @@ -552,16 +552,6 @@ static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) return ret; } -static int tw9910_enum_input(struct soc_camera_device *icd, - struct v4l2_input *inp) -{ - inp->type = V4L2_INPUT_TYPE_TUNER; - inp->std = V4L2_STD_UNKNOWN; - strcpy(inp->name, "Video"); - - return 0; -} - static int tw9910_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *id) { @@ -846,13 +836,9 @@ static int tw9910_video_probe(struct soc_camera_device *icd, struct tw9910_priv *priv = to_tw9910(client); s32 id; - /* - * We must have a parent by now. And it cannot be a wrong one. - * So this entire test is completely redundant. - */ - if (!icd->dev.parent || - to_soc_camera_host(icd->dev.parent)->nr != icd->iface) - return -ENODEV; + /* We must have a parent by now. And it cannot be a wrong one. */ + BUG_ON(!icd->parent || + to_soc_camera_host(icd->parent)->nr != icd->iface); /* * tw9910 only use 8 or 16 bit bus width @@ -891,7 +877,6 @@ static int tw9910_video_probe(struct soc_camera_device *icd, static struct soc_camera_ops tw9910_ops = { .set_bus_param = tw9910_set_bus_param, .query_bus_param = tw9910_query_bus_param, - .enum_input = tw9910_enum_input, }; static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index ea8ea8a..5a74f5e 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -45,7 +45,6 @@ * */ -#include <linux/version.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/timer.h> @@ -77,15 +76,7 @@ #define DRIVER_ALIAS "USBVision" #define DRIVER_DESC "USBVision USB Video Device Driver for Linux" #define DRIVER_LICENSE "GPL" -#define USBVISION_DRIVER_VERSION_MAJOR 0 -#define USBVISION_DRIVER_VERSION_MINOR 9 -#define USBVISION_DRIVER_VERSION_PATCHLEVEL 10 -#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,\ -USBVISION_DRIVER_VERSION_MINOR,\ -USBVISION_DRIVER_VERSION_PATCHLEVEL) -#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) \ -"." __stringify(USBVISION_DRIVER_VERSION_MINOR) \ -"." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL) +#define USBVISION_VERSION_STRING "0.9.11" #define ENABLE_HEXDUMP 0 /* Enable if you need it */ @@ -516,7 +507,6 @@ static int vidioc_querycap(struct file *file, void *priv, usbvision_device_data[usbvision->dev_model].model_string, sizeof(vc->card)); usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info)); - vc->version = USBVISION_DRIVER_VERSION; vc->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 2c8954e..10c2364 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1664,8 +1664,8 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain, return -EINVAL; } - /* Search for the matching (GUID/CS) control in the given device */ - list_for_each_entry(entity, &dev->entities, list) { + /* Search for the matching (GUID/CS) control on the current chain */ + list_for_each_entry(entity, &chain->entities, chain) { unsigned int i; if (UVC_ENTITY_TYPE(entity) != UVC_VC_EXTENSION_UNIT || diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index b6eae48..d29f9c2 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -31,6 +31,7 @@ #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> +#include <linux/version.h> #include <asm/atomic.h> #include <asm/unaligned.h> @@ -1857,7 +1858,7 @@ static int uvc_probe(struct usb_interface *intf, sizeof(dev->mdev.serial)); strcpy(dev->mdev.bus_info, udev->devpath); dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice); - dev->mdev.driver_version = DRIVER_VERSION_NUMBER; + dev->mdev.driver_version = LINUX_VERSION_CODE; if (media_device_register(&dev->mdev) < 0) goto error; @@ -2130,6 +2131,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_BUILTIN_ISIGHT }, + /* Foxlink ("HP Webcam" on HP Mini 5103) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05c8, + .idProduct = 0x0403, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_FIX_BANDWIDTH }, /* Genesys Logic USB 2.0 PC Camera */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index dde6533..ea71d5f 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -83,7 +83,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain, default: uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type " "%u.\n", xmap->v4l2_type); - ret = -EINVAL; + ret = -ENOTTY; goto done; } @@ -571,7 +571,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) strlcpy(cap->card, vdev->name, sizeof cap->card); usb_make_path(stream->dev->udev, cap->bus_info, sizeof(cap->bus_info)); - cap->version = DRIVER_VERSION_NUMBER; + cap->version = LINUX_VERSION_CODE; if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 20107fd..df32a43 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -183,8 +183,7 @@ struct uvc_xu_control { * Driver specific constants. */ -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(1, 1, 0) -#define DRIVER_VERSION "v1.1.0" +#define DRIVER_VERSION "1.1.1" /* Number of isochronous URBs. */ #define UVC_URBS 5 diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 06b9f9f..5c6100f 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -105,6 +105,9 @@ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl, menu_items[ctrl->value][0] == '\0') return -EINVAL; } + if (qctrl->type == V4L2_CTRL_TYPE_BITMASK && + (ctrl->value & ~qctrl->maximum)) + return -ERANGE; return 0; } EXPORT_SYMBOL(v4l2_ctrl_check); diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c index 7c26947..61979b7 100644 --- a/drivers/media/video/v4l2-compat-ioctl32.c +++ b/drivers/media/video/v4l2-compat-ioctl32.c @@ -662,6 +662,32 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext return 0; } +struct v4l2_event32 { + __u32 type; + union { + __u8 data[64]; + } u; + __u32 pending; + __u32 sequence; + struct compat_timespec timestamp; + __u32 id; + __u32 reserved[8]; +}; + +static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) +{ + if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) || + put_user(kp->type, &up->type) || + copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || + put_user(kp->pending, &up->pending) || + put_user(kp->sequence, &up->sequence) || + put_compat_timespec(&kp->timestamp, &up->timestamp) || + put_user(kp->id, &up->id) || + copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) + return -EFAULT; + return 0; +} + #define VIDIOC_G_FMT32 _IOWR('V', 4, struct v4l2_format32) #define VIDIOC_S_FMT32 _IOWR('V', 5, struct v4l2_format32) #define VIDIOC_QUERYBUF32 _IOWR('V', 9, struct v4l2_buffer32) @@ -675,6 +701,7 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext #define VIDIOC_G_EXT_CTRLS32 _IOWR('V', 71, struct v4l2_ext_controls32) #define VIDIOC_S_EXT_CTRLS32 _IOWR('V', 72, struct v4l2_ext_controls32) #define VIDIOC_TRY_EXT_CTRLS32 _IOWR('V', 73, struct v4l2_ext_controls32) +#define VIDIOC_DQEVENT32 _IOR ('V', 89, struct v4l2_event32) #define VIDIOC_OVERLAY32 _IOW ('V', 14, s32) #define VIDIOC_STREAMON32 _IOW ('V', 18, s32) @@ -693,6 +720,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar struct v4l2_input v2i; struct v4l2_standard v2s; struct v4l2_ext_controls v2ecs; + struct v4l2_event v2ev; unsigned long vx; int vi; } karg; @@ -715,6 +743,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar case VIDIOC_G_EXT_CTRLS32: cmd = VIDIOC_G_EXT_CTRLS; break; case VIDIOC_S_EXT_CTRLS32: cmd = VIDIOC_S_EXT_CTRLS; break; case VIDIOC_TRY_EXT_CTRLS32: cmd = VIDIOC_TRY_EXT_CTRLS; break; + case VIDIOC_DQEVENT32: cmd = VIDIOC_DQEVENT; break; case VIDIOC_OVERLAY32: cmd = VIDIOC_OVERLAY; break; case VIDIOC_STREAMON32: cmd = VIDIOC_STREAMON; break; case VIDIOC_STREAMOFF32: cmd = VIDIOC_STREAMOFF; break; @@ -778,6 +807,9 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar err = get_v4l2_ext_controls32(&karg.v2ecs, up); compatible_arg = 0; break; + case VIDIOC_DQEVENT: + compatible_arg = 0; + break; } if (err) return err; @@ -818,6 +850,10 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar err = put_v4l2_framebuffer32(&karg.v2fb, up); break; + case VIDIOC_DQEVENT: + err = put_v4l2_event32(&karg.v2ev, up); + break; + case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: @@ -920,6 +956,7 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_S_DV_TIMINGS: case VIDIOC_G_DV_TIMINGS: case VIDIOC_DQEVENT: + case VIDIOC_DQEVENT32: case VIDIOC_SUBSCRIBE_EVENT: case VIDIOC_UNSUBSCRIBE_EVENT: ret = do_video_ioctl(file, cmd, arg); diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 2412f08..06b6014 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -23,17 +23,39 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> #include <media/v4l2-dev.h> +#define has_op(master, op) \ + (master->ops && master->ops->op) +#define call_op(master, op) \ + (has_op(master, op) ? master->ops->op(master) : 0) + /* Internal temporary helper struct, one for each v4l2_ext_control */ -struct ctrl_helper { +struct v4l2_ctrl_helper { + /* Pointer to the control reference of the master control */ + struct v4l2_ctrl_ref *mref; /* The control corresponding to the v4l2_ext_control ID field. */ struct v4l2_ctrl *ctrl; - /* Used internally to mark whether this control was already - processed. */ - bool handled; + /* v4l2_ext_control index of the next control belonging to the + same cluster, or 0 if there isn't any. */ + u32 next; }; +/* Small helper function to determine if the autocluster is set to manual + mode. In that case the is_volatile flag should be ignored. */ +static bool is_cur_manual(const struct v4l2_ctrl *master) +{ + return master->is_auto && master->cur.val == master->manual_mode_value; +} + +/* Same as above, but this checks the against the new value instead of the + current value. */ +static bool is_new_manual(const struct v4l2_ctrl *master) +{ + return master->is_auto && master->val == master->manual_mode_value; +} + /* Returns NULL or a character pointer array containing the menu for the given control ID. The pointer array ends with a NULL pointer. An empty string signifies a menu entry that is invalid. This allows @@ -181,7 +203,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id) }; static const char * const mpeg_stream_vbi_fmt[] = { "No VBI", - "Private packet, IVTV format", + "Private Packet, IVTV Format", NULL }; static const char * const camera_power_line_frequency[] = { @@ -204,18 +226,130 @@ const char * const *v4l2_ctrl_get_menu(u32 id) "Negative", "Emboss", "Sketch", - "Sky blue", - "Grass green", - "Skin whiten", + "Sky Blue", + "Grass Green", + "Skin Whiten", "Vivid", NULL }; static const char * const tune_preemphasis[] = { - "No preemphasis", + "No Preemphasis", "50 useconds", "75 useconds", NULL, }; + static const char * const header_mode[] = { + "Separate Buffer", + "Joined With 1st Frame", + NULL, + }; + static const char * const multi_slice[] = { + "Single", + "Max Macroblocks", + "Max Bytes", + NULL, + }; + static const char * const entropy_mode[] = { + "CAVLC", + "CABAC", + NULL, + }; + static const char * const mpeg_h264_level[] = { + "1", + "1b", + "1.1", + "1.2", + "1.3", + "2", + "2.1", + "2.2", + "3", + "3.1", + "3.2", + "4", + "4.1", + "4.2", + "5", + "5.1", + NULL, + }; + static const char * const h264_loop_filter[] = { + "Enabled", + "Disabled", + "Disabled at Slice Boundary", + NULL, + }; + static const char * const h264_profile[] = { + "Baseline", + "Constrained Baseline", + "Main", + "Extended", + "High", + "High 10", + "High 422", + "High 444 Predictive", + "High 10 Intra", + "High 422 Intra", + "High 444 Intra", + "CAVLC 444 Intra", + "Scalable Baseline", + "Scalable High", + "Scalable High Intra", + "Multiview High", + NULL, + }; + static const char * const vui_sar_idc[] = { + "Unspecified", + "1:1", + "12:11", + "10:11", + "16:11", + "40:33", + "24:11", + "20:11", + "32:11", + "80:33", + "18:11", + "15:11", + "64:33", + "160:99", + "4:3", + "3:2", + "2:1", + "Extended SAR", + NULL, + }; + static const char * const mpeg_mpeg4_level[] = { + "0", + "0b", + "1", + "2", + "3", + "3b", + "4", + "5", + NULL, + }; + static const char * const mpeg4_profile[] = { + "Simple", + "Adcanved Simple", + "Core", + "Simple Scalable", + "Advanced Coding Efficency", + NULL, + }; + + static const char * const flash_led_mode[] = { + "Off", + "Flash", + "Torch", + NULL, + }; + static const char * const flash_strobe_source[] = { + "Software", + "External", + NULL, + }; switch (id) { case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: @@ -256,6 +390,28 @@ const char * const *v4l2_ctrl_get_menu(u32 id) return colorfx; case V4L2_CID_TUNE_PREEMPHASIS: return tune_preemphasis; + case V4L2_CID_FLASH_LED_MODE: + return flash_led_mode; + case V4L2_CID_FLASH_STROBE_SOURCE: + return flash_strobe_source; + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: + return header_mode; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: + return multi_slice; + case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE: + return entropy_mode; + case V4L2_CID_MPEG_VIDEO_H264_LEVEL: + return mpeg_h264_level; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE: + return h264_loop_filter; + case V4L2_CID_MPEG_VIDEO_H264_PROFILE: + return h264_profile; + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: + return vui_sar_idc; + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: + return mpeg_mpeg4_level; + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: + return mpeg4_profile; default: return NULL; } @@ -307,6 +463,8 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_CHROMA_GAIN: return "Chroma Gain"; case V4L2_CID_ILLUMINATORS_1: return "Illuminator 1"; case V4L2_CID_ILLUMINATORS_2: return "Illuminator 2"; + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: return "Minimum Number of Capture Buffers"; + case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT: return "Minimum Number of Output Buffers"; /* MPEG controls */ /* Keep the order of the 'case's the same as in videodev2.h! */ @@ -343,6 +501,48 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation"; case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute"; case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV"; + case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: return "Decoder Slice Interface"; + case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: return "MPEG4 Loop Filter Enable"; + case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB: return "The Number of Intra Refresh MBs"; + case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: return "Frame Level Rate Control Enable"; + case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: return "H264 MB Level Rate Control"; + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: return "Sequence Header Mode"; + case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC: return "The Max Number of Reference Picture"; + case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP: return "H263 I-Frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP: return "H263 P frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP: return "H263 B frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H263_MIN_QP: return "H263 Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_H263_MAX_QP: return "H263 Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP: return "H264 I-Frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP: return "H264 P frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP: return "H264 B frame QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_MAX_QP: return "H264 Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_MIN_QP: return "H264 Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM: return "H264 8x8 Transform Enable"; + case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE: return "H264 CPB Buffer Size"; + case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE: return "H264 Entorpy Mode"; + case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD: return "H264 I Period"; + case V4L2_CID_MPEG_VIDEO_H264_LEVEL: return "H264 Level"; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA: return "H264 Loop Filter Alpha Offset"; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA: return "H264 Loop Filter Beta Offset"; + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE: return "H264 Loop Filter Mode"; + case V4L2_CID_MPEG_VIDEO_H264_PROFILE: return "H264 Profile"; + case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT: return "Vertical Size of SAR"; + case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH: return "Horizontal Size of SAR"; + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE: return "Aspect Ratio VUI Enable"; + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: return "VUI Aspect Ratio IDC"; + case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP: return "MPEG4 I-Frame QP Value"; + case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP: return "MPEG4 P frame QP Value"; + case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP: return "MPEG4 B frame QP Value"; + case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP: return "MPEG4 Minimum QP Value"; + case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP: return "MPEG4 Maximum QP Value"; + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: return "MPEG4 Level"; + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: return "MPEG4 Profile"; + case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL: return "Quarter Pixel Search Enable"; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES: return "The Maximum Bytes Per Slice"; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB: return "The Number of MB in a Slice"; + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: return "The Slice Partitioning Method"; + case V4L2_CID_MPEG_VIDEO_VBV_SIZE: return "VBV Buffer Size"; /* CAMERA controls */ /* Keep the order of the 'case's the same as in videodev2.h! */ @@ -389,6 +589,21 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level"; case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor"; + /* Flash controls */ + case V4L2_CID_FLASH_CLASS: return "Flash controls"; + case V4L2_CID_FLASH_LED_MODE: return "LED mode"; + case V4L2_CID_FLASH_STROBE_SOURCE: return "Strobe source"; + case V4L2_CID_FLASH_STROBE: return "Strobe"; + case V4L2_CID_FLASH_STROBE_STOP: return "Stop strobe"; + case V4L2_CID_FLASH_STROBE_STATUS: return "Strobe status"; + case V4L2_CID_FLASH_TIMEOUT: return "Strobe timeout"; + case V4L2_CID_FLASH_INTENSITY: return "Intensity, flash mode"; + case V4L2_CID_FLASH_TORCH_INTENSITY: return "Intensity, torch mode"; + case V4L2_CID_FLASH_INDICATOR_INTENSITY: return "Intensity, indicator"; + case V4L2_CID_FLASH_FAULT: return "Faults"; + case V4L2_CID_FLASH_CHARGE: return "Charge"; + case V4L2_CID_FLASH_READY: return "Ready to strobe"; + default: return NULL; } @@ -423,12 +638,24 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_PILOT_TONE_ENABLED: case V4L2_CID_ILLUMINATORS_1: case V4L2_CID_ILLUMINATORS_2: + case V4L2_CID_FLASH_STROBE_STATUS: + case V4L2_CID_FLASH_CHARGE: + case V4L2_CID_FLASH_READY: + case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER: + case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE: + case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE: + case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE: + case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM: + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE: + case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL: *type = V4L2_CTRL_TYPE_BOOLEAN; *min = 0; *max = *step = 1; break; case V4L2_CID_PAN_RESET: case V4L2_CID_TILT_RESET: + case V4L2_CID_FLASH_STROBE: + case V4L2_CID_FLASH_STROBE_STOP: *type = V4L2_CTRL_TYPE_BUTTON; *flags |= V4L2_CTRL_FLAG_WRITE_ONLY; *min = *max = *step = *def = 0; @@ -452,6 +679,17 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_EXPOSURE_AUTO: case V4L2_CID_COLORFX: case V4L2_CID_TUNE_PREEMPHASIS: + case V4L2_CID_FLASH_LED_MODE: + case V4L2_CID_FLASH_STROBE_SOURCE: + case V4L2_CID_MPEG_VIDEO_HEADER_MODE: + case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE: + case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE: + case V4L2_CID_MPEG_VIDEO_H264_LEVEL: + case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE: + case V4L2_CID_MPEG_VIDEO_H264_PROFILE: + case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC: + case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL: + case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE: *type = V4L2_CTRL_TYPE_MENU; break; case V4L2_CID_RDS_TX_PS_NAME: @@ -462,6 +700,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_CAMERA_CLASS: case V4L2_CID_MPEG_CLASS: case V4L2_CID_FM_TX_CLASS: + case V4L2_CID_FLASH_CLASS: *type = V4L2_CTRL_TYPE_CTRL_CLASS; /* You can neither read not write these */ *flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY; @@ -474,6 +713,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, /* Max is calculated as RGB888 that is 2^24 */ *max = 0xFFFFFF; break; + case V4L2_CID_FLASH_FAULT: + *type = V4L2_CTRL_TYPE_BITMASK; + break; + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: + case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT: + *type = V4L2_CTRL_TYPE_INTEGER; + *flags |= V4L2_CTRL_FLAG_READ_ONLY; + break; default: *type = V4L2_CTRL_TYPE_INTEGER; break; @@ -519,6 +766,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_ZOOM_RELATIVE: *flags |= V4L2_CTRL_FLAG_WRITE_ONLY; break; + case V4L2_CID_FLASH_STROBE_STATUS: + case V4L2_CID_FLASH_READY: + *flags |= V4L2_CTRL_FLAG_READ_ONLY; + break; } } EXPORT_SYMBOL(v4l2_ctrl_fill); @@ -537,6 +788,42 @@ static bool type_is_int(const struct v4l2_ctrl *ctrl) } } +static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 changes) +{ + memset(ev->reserved, 0, sizeof(ev->reserved)); + ev->type = V4L2_EVENT_CTRL; + ev->id = ctrl->id; + ev->u.ctrl.changes = changes; + ev->u.ctrl.type = ctrl->type; + ev->u.ctrl.flags = ctrl->flags; + if (ctrl->type == V4L2_CTRL_TYPE_STRING) + ev->u.ctrl.value64 = 0; + else + ev->u.ctrl.value64 = ctrl->cur.val64; + ev->u.ctrl.minimum = ctrl->minimum; + ev->u.ctrl.maximum = ctrl->maximum; + if (ctrl->type == V4L2_CTRL_TYPE_MENU) + ev->u.ctrl.step = 1; + else + ev->u.ctrl.step = ctrl->step; + ev->u.ctrl.default_value = ctrl->default_value; +} + +static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes) +{ + struct v4l2_event ev; + struct v4l2_subscribed_event *sev; + + if (list_empty(&ctrl->ev_subs)) + return; + fill_event(&ev, ctrl, changes); + + list_for_each_entry(sev, &ctrl->ev_subs, node) + if (sev->fh && (sev->fh != fh || + (sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK))) + v4l2_event_queue_fh(sev->fh, &ev); +} + /* Helper function: copy the current control value back to the caller */ static int cur_to_user(struct v4l2_ext_control *c, struct v4l2_ctrl *ctrl) @@ -624,22 +911,45 @@ static int new_to_user(struct v4l2_ext_control *c, } /* Copy the new value to the current value. */ -static void new_to_cur(struct v4l2_ctrl *ctrl) +static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, + bool update_inactive) { + bool changed = false; + if (ctrl == NULL) return; switch (ctrl->type) { + case V4L2_CTRL_TYPE_BUTTON: + changed = true; + break; case V4L2_CTRL_TYPE_STRING: /* strings are always 0-terminated */ + changed = strcmp(ctrl->string, ctrl->cur.string); strcpy(ctrl->cur.string, ctrl->string); break; case V4L2_CTRL_TYPE_INTEGER64: + changed = ctrl->val64 != ctrl->cur.val64; ctrl->cur.val64 = ctrl->val64; break; default: + changed = ctrl->val != ctrl->cur.val; ctrl->cur.val = ctrl->val; break; } + if (update_inactive) { + ctrl->flags &= ~V4L2_CTRL_FLAG_INACTIVE; + if (!is_cur_manual(ctrl->cluster[0])) + ctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + } + if (changed || update_inactive) { + /* If a control was changed that was not one of the controls + modified by the application, then send the event to all. */ + if (!ctrl->is_new) + fh = NULL; + send_event(fh, ctrl, + (changed ? V4L2_EVENT_CTRL_CH_VALUE : 0) | + (update_inactive ? V4L2_EVENT_CTRL_CH_FLAGS : 0)); + } } /* Copy the current value to the new value */ @@ -692,13 +1002,11 @@ static int cluster_changed(struct v4l2_ctrl *master) return diff; } -/* Validate a new control */ -static int validate_new(struct v4l2_ctrl *ctrl) +/* Validate integer-type control */ +static int validate_new_int(const struct v4l2_ctrl *ctrl, s32 *pval) { - s32 val = ctrl->val; - char *s = ctrl->string; + s32 val = *pval; u32 offset; - size_t len; switch (ctrl->type) { case V4L2_CTRL_TYPE_INTEGER: @@ -711,11 +1019,11 @@ static int validate_new(struct v4l2_ctrl *ctrl) offset = val - ctrl->minimum; offset = ctrl->step * (offset / ctrl->step); val = ctrl->minimum + offset; - ctrl->val = val; + *pval = val; return 0; case V4L2_CTRL_TYPE_BOOLEAN: - ctrl->val = !!ctrl->val; + *pval = !!val; return 0; case V4L2_CTRL_TYPE_MENU: @@ -726,11 +1034,35 @@ static int validate_new(struct v4l2_ctrl *ctrl) return -EINVAL; return 0; + case V4L2_CTRL_TYPE_BITMASK: + *pval &= ctrl->maximum; + return 0; + case V4L2_CTRL_TYPE_BUTTON: case V4L2_CTRL_TYPE_CTRL_CLASS: - ctrl->val64 = 0; + *pval = 0; return 0; + default: + return -EINVAL; + } +} + +/* Validate a new control */ +static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c) +{ + char *s = c->string; + size_t len; + + switch (ctrl->type) { + case V4L2_CTRL_TYPE_INTEGER: + case V4L2_CTRL_TYPE_BOOLEAN: + case V4L2_CTRL_TYPE_MENU: + case V4L2_CTRL_TYPE_BITMASK: + case V4L2_CTRL_TYPE_BUTTON: + case V4L2_CTRL_TYPE_CTRL_CLASS: + return validate_new_int(ctrl, &c->value); + case V4L2_CTRL_TYPE_INTEGER64: return 0; @@ -780,6 +1112,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl) { struct v4l2_ctrl_ref *ref, *next_ref; struct v4l2_ctrl *ctrl, *next_ctrl; + struct v4l2_subscribed_event *sev, *next_sev; if (hdl == NULL || hdl->buckets == NULL) return; @@ -793,6 +1126,8 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl) /* Free all controls owned by the handler */ list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) { list_del(&ctrl->node); + list_for_each_entry_safe(sev, next_sev, &ctrl->ev_subs, node) + list_del(&sev->node); kfree(ctrl); } kfree(hdl->buckets); @@ -962,13 +1297,17 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl, /* Sanity checks */ if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE || - max < min || (type == V4L2_CTRL_TYPE_INTEGER && step == 0) || + (type == V4L2_CTRL_TYPE_BITMASK && max == 0) || (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) || (type == V4L2_CTRL_TYPE_STRING && max == 0)) { handler_set_err(hdl, -ERANGE); return NULL; } + if (type != V4L2_CTRL_TYPE_BITMASK && max < min) { + handler_set_err(hdl, -ERANGE); + return NULL; + } if ((type == V4L2_CTRL_TYPE_INTEGER || type == V4L2_CTRL_TYPE_MENU || type == V4L2_CTRL_TYPE_BOOLEAN) && @@ -976,6 +1315,10 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl, handler_set_err(hdl, -ERANGE); return NULL; } + if (type == V4L2_CTRL_TYPE_BITMASK && ((def & ~max) || min || step)) { + handler_set_err(hdl, -ERANGE); + return NULL; + } if (type == V4L2_CTRL_TYPE_BUTTON) flags |= V4L2_CTRL_FLAG_WRITE_ONLY; @@ -991,6 +1334,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl, } INIT_LIST_HEAD(&ctrl->node); + INIT_LIST_HEAD(&ctrl->ev_subs); ctrl->handler = hdl; ctrl->ops = ops; ctrl->id = id; @@ -1132,6 +1476,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, /* Skip handler-private controls. */ if (ctrl->is_private) continue; + /* And control classes */ + if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS) + continue; ret = handler_new_ref(hdl, ctrl); if (ret) break; @@ -1147,7 +1494,7 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls) int i; /* The first control is the master control and it must not be NULL */ - BUG_ON(controls[0] == NULL); + BUG_ON(ncontrols == 0 || controls[0] == NULL); for (i = 0; i < ncontrols; i++) { if (controls[i]) { @@ -1158,18 +1505,47 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls) } EXPORT_SYMBOL(v4l2_ctrl_cluster); +void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls, + u8 manual_val, bool set_volatile) +{ + struct v4l2_ctrl *master = controls[0]; + u32 flag; + int i; + + v4l2_ctrl_cluster(ncontrols, controls); + WARN_ON(ncontrols <= 1); + WARN_ON(manual_val < master->minimum || manual_val > master->maximum); + master->is_auto = true; + master->manual_mode_value = manual_val; + master->flags |= V4L2_CTRL_FLAG_UPDATE; + flag = is_cur_manual(master) ? 0 : V4L2_CTRL_FLAG_INACTIVE; + + for (i = 1; i < ncontrols; i++) + if (controls[i]) { + controls[i]->is_volatile = set_volatile; + controls[i]->flags |= flag; + } +} +EXPORT_SYMBOL(v4l2_ctrl_auto_cluster); + /* Activate/deactivate a control. */ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active) { + /* invert since the actual flag is called 'inactive' */ + bool inactive = !active; + bool old; + if (ctrl == NULL) return; - if (!active) + if (inactive) /* set V4L2_CTRL_FLAG_INACTIVE */ - set_bit(4, &ctrl->flags); + old = test_and_set_bit(4, &ctrl->flags); else /* clear V4L2_CTRL_FLAG_INACTIVE */ - clear_bit(4, &ctrl->flags); + old = test_and_clear_bit(4, &ctrl->flags); + if (old != inactive) + send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS); } EXPORT_SYMBOL(v4l2_ctrl_activate); @@ -1181,15 +1557,21 @@ EXPORT_SYMBOL(v4l2_ctrl_activate); these controls. */ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed) { + bool old; + if (ctrl == NULL) return; + v4l2_ctrl_lock(ctrl); if (grabbed) /* set V4L2_CTRL_FLAG_GRABBED */ - set_bit(1, &ctrl->flags); + old = test_and_set_bit(1, &ctrl->flags); else /* clear V4L2_CTRL_FLAG_GRABBED */ - clear_bit(1, &ctrl->flags); + old = test_and_clear_bit(1, &ctrl->flags); + if (old != grabbed) + send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS); + v4l2_ctrl_unlock(ctrl); } EXPORT_SYMBOL(v4l2_ctrl_grab); @@ -1217,6 +1599,9 @@ static void log_ctrl(const struct v4l2_ctrl *ctrl, case V4L2_CTRL_TYPE_MENU: printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]); break; + case V4L2_CTRL_TYPE_BITMASK: + printk(KERN_CONT "0x%08x", ctrl->cur.val); + break; case V4L2_CTRL_TYPE_INTEGER64: printk(KERN_CONT "%lld", ctrl->cur.val64); break; @@ -1277,26 +1662,21 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl) int i; /* Skip if this control was already handled by a cluster. */ - if (ctrl->done) + /* Skip button controls and read-only controls. */ + if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON || + (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)) continue; for (i = 0; i < master->ncontrols; i++) { if (master->cluster[i]) { cur_to_new(master->cluster[i]); master->cluster[i]->is_new = 1; + master->cluster[i]->done = true; } } - - /* Skip button controls and read-only controls. */ - if (ctrl->type == V4L2_CTRL_TYPE_BUTTON || - (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)) - continue; - ret = master->ops->s_ctrl(master); + ret = call_op(master, s_ctrl); if (ret) break; - for (i = 0; i < master->ncontrols; i++) - if (master->cluster[i]) - master->cluster[i]->done = true; } mutex_unlock(&hdl->lock); return ret; @@ -1447,18 +1827,19 @@ EXPORT_SYMBOL(v4l2_subdev_querymenu); Find the controls in the control array and do some basic checks. */ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs, - struct ctrl_helper *helpers, - bool try) + struct v4l2_ctrl_helper *helpers) { + struct v4l2_ctrl_helper *h; + bool have_clusters = false; u32 i; - for (i = 0; i < cs->count; i++) { + for (i = 0, h = helpers; i < cs->count; i++, h++) { struct v4l2_ext_control *c = &cs->controls[i]; + struct v4l2_ctrl_ref *ref; struct v4l2_ctrl *ctrl; u32 id = c->id & V4L2_CTRL_ID_MASK; - if (try) - cs->error_idx = i; + cs->error_idx = i; if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class) return -EINVAL; @@ -1467,53 +1848,59 @@ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl, extended controls */ if (id >= V4L2_CID_PRIVATE_BASE) return -EINVAL; - ctrl = v4l2_ctrl_find(hdl, id); - if (ctrl == NULL) + ref = find_ref_lock(hdl, id); + if (ref == NULL) return -EINVAL; + ctrl = ref->ctrl; if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED) return -EINVAL; - helpers[i].ctrl = ctrl; - helpers[i].handled = false; + if (ctrl->cluster[0]->ncontrols > 1) + have_clusters = true; + if (ctrl->cluster[0] != ctrl) + ref = find_ref_lock(hdl, ctrl->cluster[0]->id); + /* Store the ref to the master control of the cluster */ + h->mref = ref; + h->ctrl = ctrl; + /* Initially set next to 0, meaning that there is no other + control in this helper array belonging to the same + cluster */ + h->next = 0; } - return 0; -} -typedef int (*cluster_func)(struct v4l2_ext_control *c, - struct v4l2_ctrl *ctrl); + /* We are done if there were no controls that belong to a multi- + control cluster. */ + if (!have_clusters) + return 0; -/* Walk over all controls in v4l2_ext_controls belonging to the same cluster - and call the provided function. */ -static int cluster_walk(unsigned from, - struct v4l2_ext_controls *cs, - struct ctrl_helper *helpers, - cluster_func f) -{ - struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster; - int ret = 0; - int i; + /* The code below figures out in O(n) time which controls in the list + belong to the same cluster. */ - /* Find any controls from the same cluster and call the function */ - for (i = from; !ret && i < cs->count; i++) { - struct v4l2_ctrl *ctrl = helpers[i].ctrl; + /* This has to be done with the handler lock taken. */ + mutex_lock(&hdl->lock); - if (!helpers[i].handled && ctrl->cluster == cluster) - ret = f(&cs->controls[i], ctrl); + /* First zero the helper field in the master control references */ + for (i = 0; i < cs->count; i++) + helpers[i].mref->helper = 0; + for (i = 0, h = helpers; i < cs->count; i++, h++) { + struct v4l2_ctrl_ref *mref = h->mref; + + /* If the mref->helper is set, then it points to an earlier + helper that belongs to the same cluster. */ + if (mref->helper) { + /* Set the next field of mref->helper to the current + index: this means that that earlier helper now + points to the next helper in the same cluster. */ + mref->helper->next = i; + /* mref should be set only for the first helper in the + cluster, clear the others. */ + h->mref = NULL; + } + /* Point the mref helper to the current helper struct. */ + mref->helper = h; } - return ret; -} - -static void cluster_done(unsigned from, - struct v4l2_ext_controls *cs, - struct ctrl_helper *helpers) -{ - struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster; - int i; - - /* Find any controls from the same cluster and mark them as handled */ - for (i = from; i < cs->count; i++) - if (helpers[i].ctrl->cluster == cluster) - helpers[i].handled = true; + mutex_unlock(&hdl->lock); + return 0; } /* Handles the corner case where cs->count == 0. It checks whether the @@ -1531,10 +1918,10 @@ static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class) /* Get extended controls. Allocates the helpers array if needed. */ int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs) { - struct ctrl_helper helper[4]; - struct ctrl_helper *helpers = helper; + struct v4l2_ctrl_helper helper[4]; + struct v4l2_ctrl_helper *helpers = helper; int ret; - int i; + int i, j; cs->error_idx = cs->count; cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class); @@ -1551,30 +1938,46 @@ int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs return -ENOMEM; } - ret = prepare_ext_ctrls(hdl, cs, helpers, false); + ret = prepare_ext_ctrls(hdl, cs, helpers); + cs->error_idx = cs->count; for (i = 0; !ret && i < cs->count; i++) if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY) ret = -EACCES; for (i = 0; !ret && i < cs->count; i++) { - struct v4l2_ctrl *ctrl = helpers[i].ctrl; - struct v4l2_ctrl *master = ctrl->cluster[0]; + int (*ctrl_to_user)(struct v4l2_ext_control *c, + struct v4l2_ctrl *ctrl) = cur_to_user; + struct v4l2_ctrl *master; - if (helpers[i].handled) + if (helpers[i].mref == NULL) continue; + master = helpers[i].mref->ctrl; cs->error_idx = i; v4l2_ctrl_lock(master); - /* g_volatile_ctrl will update the current control values */ - if (ctrl->is_volatile && master->ops->g_volatile_ctrl) - ret = master->ops->g_volatile_ctrl(master); - /* If OK, then copy the current control values to the caller */ - if (!ret) - ret = cluster_walk(i, cs, helpers, cur_to_user); + + /* g_volatile_ctrl will update the new control values */ + if (has_op(master, g_volatile_ctrl) && !is_cur_manual(master)) { + for (j = 0; j < master->ncontrols; j++) + cur_to_new(master->cluster[j]); + ret = call_op(master, g_volatile_ctrl); + ctrl_to_user = new_to_user; + } + /* If OK, then copy the current (for non-volatile controls) + or the new (for volatile controls) control values to the + caller */ + if (!ret) { + u32 idx = i; + + do { + ret = ctrl_to_user(cs->controls + idx, + helpers[idx].ctrl); + idx = helpers[idx].next; + } while (!ret && idx); + } v4l2_ctrl_unlock(master); - cluster_done(i, cs, helpers); } if (cs->count > ARRAY_SIZE(helper)) @@ -1594,15 +1997,21 @@ static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val) { struct v4l2_ctrl *master = ctrl->cluster[0]; int ret = 0; + int i; if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY) return -EACCES; v4l2_ctrl_lock(master); /* g_volatile_ctrl will update the current control values */ - if (ctrl->is_volatile && master->ops->g_volatile_ctrl) - ret = master->ops->g_volatile_ctrl(master); - *val = ctrl->cur.val; + if (ctrl->is_volatile && !is_cur_manual(master)) { + for (i = 0; i < master->ncontrols; i++) + cur_to_new(master->cluster[i]); + ret = call_op(master, g_volatile_ctrl); + *val = ctrl->val; + } else { + *val = ctrl->cur.val; + } v4l2_ctrl_unlock(master); return ret; } @@ -1638,72 +2047,61 @@ EXPORT_SYMBOL(v4l2_ctrl_g_ctrl); /* Core function that calls try/s_ctrl and ensures that the new value is copied to the current value on a set. Must be called with ctrl->handler->lock held. */ -static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set) +static int try_or_set_cluster(struct v4l2_fh *fh, + struct v4l2_ctrl *master, bool set) { - bool try = !set; - int ret = 0; + bool update_flag; + int ret; int i; /* Go through the cluster and either validate the new value or (if no new value was set), copy the current value to the new value, ensuring a consistent view for the control ops when called. */ - for (i = 0; !ret && i < master->ncontrols; i++) { + for (i = 0; i < master->ncontrols; i++) { struct v4l2_ctrl *ctrl = master->cluster[i]; if (ctrl == NULL) continue; - if (ctrl->is_new) { - /* Double check this: it may have changed since the - last check in try_or_set_ext_ctrls(). */ - if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)) - return -EBUSY; - - /* Validate if required */ - if (!set) - ret = validate_new(ctrl); + if (!ctrl->is_new) { + cur_to_new(ctrl); continue; } - /* No new value was set, so copy the current and force - a call to try_ctrl later, since the values for the cluster - may now have changed and the end result might be invalid. */ - try = true; - cur_to_new(ctrl); + /* Check again: it may have changed since the + previous check in try_or_set_ext_ctrls(). */ + if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)) + return -EBUSY; } - /* For larger clusters you have to call try_ctrl again to - verify that the controls are still valid after the - 'cur_to_new' above. */ - if (!ret && master->ops->try_ctrl && try) - ret = master->ops->try_ctrl(master); + ret = call_op(master, try_ctrl); /* Don't set if there is no change */ - if (!ret && set && cluster_changed(master)) { - ret = master->ops->s_ctrl(master); - /* If OK, then make the new values permanent. */ - if (!ret) - for (i = 0; i < master->ncontrols; i++) - new_to_cur(master->cluster[i]); - } - return ret; + if (ret || !set || !cluster_changed(master)) + return ret; + ret = call_op(master, s_ctrl); + if (ret) + return ret; + + /* If OK, then make the new values permanent. */ + update_flag = is_cur_manual(master) != is_new_manual(master); + for (i = 0; i < master->ncontrols; i++) + new_to_cur(fh, master->cluster[i], update_flag && i > 0); + return 0; } -/* Try or set controls. */ -static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, - struct v4l2_ext_controls *cs, - struct ctrl_helper *helpers, - bool set) +/* Validate controls. */ +static int validate_ctrls(struct v4l2_ext_controls *cs, + struct v4l2_ctrl_helper *helpers, bool set) { - unsigned i, j; + unsigned i; int ret = 0; cs->error_idx = cs->count; for (i = 0; i < cs->count; i++) { struct v4l2_ctrl *ctrl = helpers[i].ctrl; - if (!set) - cs->error_idx = i; + cs->error_idx = i; if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) return -EACCES; @@ -1715,50 +2113,22 @@ static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, best-effort to avoid that. */ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)) return -EBUSY; + ret = validate_new(ctrl, &cs->controls[i]); + if (ret) + return ret; } - - for (i = 0; !ret && i < cs->count; i++) { - struct v4l2_ctrl *ctrl = helpers[i].ctrl; - struct v4l2_ctrl *master = ctrl->cluster[0]; - - cs->error_idx = i; - - if (helpers[i].handled) - continue; - - v4l2_ctrl_lock(ctrl); - - /* Reset the 'is_new' flags of the cluster */ - for (j = 0; j < master->ncontrols; j++) - if (master->cluster[j]) - master->cluster[j]->is_new = 0; - - /* Copy the new caller-supplied control values. - user_to_new() sets 'is_new' to 1. */ - ret = cluster_walk(i, cs, helpers, user_to_new); - - if (!ret) - ret = try_or_set_control_cluster(master, set); - - /* Copy the new values back to userspace. */ - if (!ret) - ret = cluster_walk(i, cs, helpers, new_to_user); - - v4l2_ctrl_unlock(ctrl); - cluster_done(i, cs, helpers); - } - return ret; + return 0; } /* Try or try-and-set controls */ -static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, +static int try_set_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs, bool set) { - struct ctrl_helper helper[4]; - struct ctrl_helper *helpers = helper; + struct v4l2_ctrl_helper helper[4]; + struct v4l2_ctrl_helper *helpers = helper; + unsigned i, j; int ret; - int i; cs->error_idx = cs->count; cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class); @@ -1774,25 +2144,49 @@ static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, if (!helpers) return -ENOMEM; } - ret = prepare_ext_ctrls(hdl, cs, helpers, !set); - if (ret) - goto free; - - /* First 'try' all controls and abort on error */ - ret = try_or_set_ext_ctrls(hdl, cs, helpers, false); - /* If this is a 'set' operation and the initial 'try' failed, - then set error_idx to count to tell the application that no - controls changed value yet. */ - if (set) + ret = prepare_ext_ctrls(hdl, cs, helpers); + if (!ret) + ret = validate_ctrls(cs, helpers, set); + if (ret && set) cs->error_idx = cs->count; - if (!ret && set) { - /* Reset 'handled' state */ - for (i = 0; i < cs->count; i++) - helpers[i].handled = false; - ret = try_or_set_ext_ctrls(hdl, cs, helpers, true); + for (i = 0; !ret && i < cs->count; i++) { + struct v4l2_ctrl *master; + u32 idx = i; + + if (helpers[i].mref == NULL) + continue; + + cs->error_idx = i; + master = helpers[i].mref->ctrl; + v4l2_ctrl_lock(master); + + /* Reset the 'is_new' flags of the cluster */ + for (j = 0; j < master->ncontrols; j++) + if (master->cluster[j]) + master->cluster[j]->is_new = 0; + + /* Copy the new caller-supplied control values. + user_to_new() sets 'is_new' to 1. */ + do { + ret = user_to_new(cs->controls + idx, helpers[idx].ctrl); + idx = helpers[idx].next; + } while (!ret && idx); + + if (!ret) + ret = try_or_set_cluster(fh, master, set); + + /* Copy the new values back to userspace. */ + if (!ret) { + idx = i; + do { + ret = new_to_user(cs->controls + idx, + helpers[idx].ctrl); + idx = helpers[idx].next; + } while (!ret && idx); + } + v4l2_ctrl_unlock(master); } -free: if (cs->count > ARRAY_SIZE(helper)) kfree(helpers); return ret; @@ -1800,37 +2194,39 @@ free: int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs) { - return try_set_ext_ctrls(hdl, cs, false); + return try_set_ext_ctrls(NULL, hdl, cs, false); } EXPORT_SYMBOL(v4l2_try_ext_ctrls); -int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs) +int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_ext_controls *cs) { - return try_set_ext_ctrls(hdl, cs, true); + return try_set_ext_ctrls(fh, hdl, cs, true); } EXPORT_SYMBOL(v4l2_s_ext_ctrls); int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs) { - return try_set_ext_ctrls(sd->ctrl_handler, cs, false); + return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, false); } EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls); int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs) { - return try_set_ext_ctrls(sd->ctrl_handler, cs, true); + return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, true); } EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls); /* Helper function for VIDIOC_S_CTRL compatibility */ -static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) +static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, s32 *val) { struct v4l2_ctrl *master = ctrl->cluster[0]; int ret; int i; - if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) - return -EACCES; + ret = validate_new_int(ctrl, val); + if (ret) + return ret; v4l2_ctrl_lock(ctrl); @@ -1841,28 +2237,30 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) ctrl->val = *val; ctrl->is_new = 1; - ret = try_or_set_control_cluster(master, false); - if (!ret) - ret = try_or_set_control_cluster(master, true); + ret = try_or_set_cluster(fh, master, true); *val = ctrl->cur.val; v4l2_ctrl_unlock(ctrl); return ret; } -int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control) +int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_control *control) { struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id); if (ctrl == NULL || !type_is_int(ctrl)) return -EINVAL; - return set_ctrl(ctrl, &control->value); + if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) + return -EACCES; + + return set_ctrl(fh, ctrl, &control->value); } EXPORT_SYMBOL(v4l2_s_ctrl); int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control) { - return v4l2_s_ctrl(sd->ctrl_handler, control); + return v4l2_s_ctrl(NULL, sd->ctrl_handler, control); } EXPORT_SYMBOL(v4l2_subdev_s_ctrl); @@ -1870,6 +2268,34 @@ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val) { /* It's a driver bug if this happens. */ WARN_ON(!type_is_int(ctrl)); - return set_ctrl(ctrl, &val); + return set_ctrl(NULL, ctrl, &val); } EXPORT_SYMBOL(v4l2_ctrl_s_ctrl); + +void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl, + struct v4l2_subscribed_event *sev) +{ + v4l2_ctrl_lock(ctrl); + list_add_tail(&sev->node, &ctrl->ev_subs); + if (ctrl->type != V4L2_CTRL_TYPE_CTRL_CLASS && + (sev->flags & V4L2_EVENT_SUB_FL_SEND_INITIAL)) { + struct v4l2_event ev; + u32 changes = V4L2_EVENT_CTRL_CH_FLAGS; + + if (!(ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)) + changes |= V4L2_EVENT_CTRL_CH_VALUE; + fill_event(&ev, ctrl, changes); + v4l2_event_queue_fh(sev->fh, &ev); + } + v4l2_ctrl_unlock(ctrl); +} +EXPORT_SYMBOL(v4l2_ctrl_add_event); + +void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl, + struct v4l2_subscribed_event *sev) +{ + v4l2_ctrl_lock(ctrl); + list_del(&sev->node); + v4l2_ctrl_unlock(ctrl); +} +EXPORT_SYMBOL(v4l2_ctrl_del_event); diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index 4aae501..c72856c 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -209,6 +209,7 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) vdev->v4l2_dev = v4l2_dev; vdev->fops = &v4l2_subdev_fops; vdev->release = video_device_release_empty; + vdev->ctrl_handler = sd->ctrl_handler; err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1, sd->owner); if (err < 0) diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c index 69fd343..53b190c 100644 --- a/drivers/media/video/v4l2-event.c +++ b/drivers/media/video/v4l2-event.c @@ -25,100 +25,39 @@ #include <media/v4l2-dev.h> #include <media/v4l2-fh.h> #include <media/v4l2-event.h> +#include <media/v4l2-ctrls.h> #include <linux/sched.h> #include <linux/slab.h> -int v4l2_event_init(struct v4l2_fh *fh) +static unsigned sev_pos(const struct v4l2_subscribed_event *sev, unsigned idx) { - fh->events = kzalloc(sizeof(*fh->events), GFP_KERNEL); - if (fh->events == NULL) - return -ENOMEM; - - init_waitqueue_head(&fh->events->wait); - - INIT_LIST_HEAD(&fh->events->free); - INIT_LIST_HEAD(&fh->events->available); - INIT_LIST_HEAD(&fh->events->subscribed); - - fh->events->sequence = -1; - - return 0; -} -EXPORT_SYMBOL_GPL(v4l2_event_init); - -int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n) -{ - struct v4l2_events *events = fh->events; - unsigned long flags; - - if (!events) { - WARN_ON(1); - return -ENOMEM; - } - - while (events->nallocated < n) { - struct v4l2_kevent *kev; - - kev = kzalloc(sizeof(*kev), GFP_KERNEL); - if (kev == NULL) - return -ENOMEM; - - spin_lock_irqsave(&fh->vdev->fh_lock, flags); - list_add_tail(&kev->list, &events->free); - events->nallocated++; - spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); - } - - return 0; -} -EXPORT_SYMBOL_GPL(v4l2_event_alloc); - -#define list_kfree(list, type, member) \ - while (!list_empty(list)) { \ - type *hi; \ - hi = list_first_entry(list, type, member); \ - list_del(&hi->member); \ - kfree(hi); \ - } - -void v4l2_event_free(struct v4l2_fh *fh) -{ - struct v4l2_events *events = fh->events; - - if (!events) - return; - - list_kfree(&events->free, struct v4l2_kevent, list); - list_kfree(&events->available, struct v4l2_kevent, list); - list_kfree(&events->subscribed, struct v4l2_subscribed_event, list); - - kfree(events); - fh->events = NULL; + idx += sev->first; + return idx >= sev->elems ? idx - sev->elems : idx; } -EXPORT_SYMBOL_GPL(v4l2_event_free); static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event) { - struct v4l2_events *events = fh->events; struct v4l2_kevent *kev; unsigned long flags; spin_lock_irqsave(&fh->vdev->fh_lock, flags); - if (list_empty(&events->available)) { + if (list_empty(&fh->available)) { spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); return -ENOENT; } - WARN_ON(events->navailable == 0); + WARN_ON(fh->navailable == 0); - kev = list_first_entry(&events->available, struct v4l2_kevent, list); - list_move(&kev->list, &events->free); - events->navailable--; + kev = list_first_entry(&fh->available, struct v4l2_kevent, list); + list_del(&kev->list); + fh->navailable--; - kev->event.pending = events->navailable; + kev->event.pending = fh->navailable; *event = kev->event; + kev->sev->first = sev_pos(kev->sev, 1); + kev->sev->in_use--; spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); @@ -128,7 +67,6 @@ static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event) int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, int nonblocking) { - struct v4l2_events *events = fh->events; int ret; if (nonblocking) @@ -139,8 +77,8 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, mutex_unlock(fh->vdev->lock); do { - ret = wait_event_interruptible(events->wait, - events->navailable != 0); + ret = wait_event_interruptible(fh->wait, + fh->navailable != 0); if (ret < 0) break; @@ -154,23 +92,72 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, } EXPORT_SYMBOL_GPL(v4l2_event_dequeue); -/* Caller must hold fh->event->lock! */ +/* Caller must hold fh->vdev->fh_lock! */ static struct v4l2_subscribed_event *v4l2_event_subscribed( - struct v4l2_fh *fh, u32 type) + struct v4l2_fh *fh, u32 type, u32 id) { - struct v4l2_events *events = fh->events; struct v4l2_subscribed_event *sev; assert_spin_locked(&fh->vdev->fh_lock); - list_for_each_entry(sev, &events->subscribed, list) { - if (sev->type == type) + list_for_each_entry(sev, &fh->subscribed, list) + if (sev->type == type && sev->id == id) return sev; - } return NULL; } +static void __v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev, + const struct timespec *ts) +{ + struct v4l2_subscribed_event *sev; + struct v4l2_kevent *kev; + bool copy_payload = true; + + /* Are we subscribed? */ + sev = v4l2_event_subscribed(fh, ev->type, ev->id); + if (sev == NULL) + return; + + /* Increase event sequence number on fh. */ + fh->sequence++; + + /* Do we have any free events? */ + if (sev->in_use == sev->elems) { + /* no, remove the oldest one */ + kev = sev->events + sev_pos(sev, 0); + list_del(&kev->list); + sev->in_use--; + sev->first = sev_pos(sev, 1); + fh->navailable--; + if (sev->elems == 1) { + if (sev->replace) { + sev->replace(&kev->event, ev); + copy_payload = false; + } + } else if (sev->merge) { + struct v4l2_kevent *second_oldest = + sev->events + sev_pos(sev, 0); + sev->merge(&kev->event, &second_oldest->event); + } + } + + /* Take one and fill it. */ + kev = sev->events + sev_pos(sev, sev->in_use); + kev->event.type = ev->type; + if (copy_payload) + kev->event.u = ev->u; + kev->event.id = ev->id; + kev->event.timestamp = *ts; + kev->event.sequence = fh->sequence; + sev->in_use++; + list_add_tail(&kev->list, &fh->available); + + fh->navailable++; + + wake_up_all(&fh->wait); +} + void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev) { struct v4l2_fh *fh; @@ -181,81 +168,95 @@ void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev) spin_lock_irqsave(&vdev->fh_lock, flags); - list_for_each_entry(fh, &vdev->fh_list, list) { - struct v4l2_events *events = fh->events; - struct v4l2_kevent *kev; + list_for_each_entry(fh, &vdev->fh_list, list) + __v4l2_event_queue_fh(fh, ev, ×tamp); - /* Are we subscribed? */ - if (!v4l2_event_subscribed(fh, ev->type)) - continue; + spin_unlock_irqrestore(&vdev->fh_lock, flags); +} +EXPORT_SYMBOL_GPL(v4l2_event_queue); - /* Increase event sequence number on fh. */ - events->sequence++; +void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev) +{ + unsigned long flags; + struct timespec timestamp; - /* Do we have any free events? */ - if (list_empty(&events->free)) - continue; + ktime_get_ts(×tamp); - /* Take one and fill it. */ - kev = list_first_entry(&events->free, struct v4l2_kevent, list); - kev->event.type = ev->type; - kev->event.u = ev->u; - kev->event.timestamp = timestamp; - kev->event.sequence = events->sequence; - list_move_tail(&kev->list, &events->available); + spin_lock_irqsave(&fh->vdev->fh_lock, flags); + __v4l2_event_queue_fh(fh, ev, ×tamp); + spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); +} +EXPORT_SYMBOL_GPL(v4l2_event_queue_fh); - events->navailable++; +int v4l2_event_pending(struct v4l2_fh *fh) +{ + return fh->navailable; +} +EXPORT_SYMBOL_GPL(v4l2_event_pending); - wake_up_all(&events->wait); - } +static void ctrls_replace(struct v4l2_event *old, const struct v4l2_event *new) +{ + u32 old_changes = old->u.ctrl.changes; - spin_unlock_irqrestore(&vdev->fh_lock, flags); + old->u.ctrl = new->u.ctrl; + old->u.ctrl.changes |= old_changes; } -EXPORT_SYMBOL_GPL(v4l2_event_queue); -int v4l2_event_pending(struct v4l2_fh *fh) +static void ctrls_merge(const struct v4l2_event *old, struct v4l2_event *new) { - return fh->events->navailable; + new->u.ctrl.changes |= old->u.ctrl.changes; } -EXPORT_SYMBOL_GPL(v4l2_event_pending); int v4l2_event_subscribe(struct v4l2_fh *fh, - struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub, unsigned elems) { - struct v4l2_events *events = fh->events; - struct v4l2_subscribed_event *sev; + struct v4l2_subscribed_event *sev, *found_ev; + struct v4l2_ctrl *ctrl = NULL; unsigned long flags; - - if (fh->events == NULL) { - WARN_ON(1); - return -ENOMEM; + unsigned i; + + if (elems < 1) + elems = 1; + if (sub->type == V4L2_EVENT_CTRL) { + ctrl = v4l2_ctrl_find(fh->ctrl_handler, sub->id); + if (ctrl == NULL) + return -EINVAL; } - sev = kmalloc(sizeof(*sev), GFP_KERNEL); + sev = kzalloc(sizeof(*sev) + sizeof(struct v4l2_kevent) * elems, GFP_KERNEL); if (!sev) return -ENOMEM; - - spin_lock_irqsave(&fh->vdev->fh_lock, flags); - - if (v4l2_event_subscribed(fh, sub->type) == NULL) { - INIT_LIST_HEAD(&sev->list); - sev->type = sub->type; - - list_add(&sev->list, &events->subscribed); - sev = NULL; + for (i = 0; i < elems; i++) + sev->events[i].sev = sev; + sev->type = sub->type; + sev->id = sub->id; + sev->flags = sub->flags; + sev->fh = fh; + sev->elems = elems; + if (ctrl) { + sev->replace = ctrls_replace; + sev->merge = ctrls_merge; } + spin_lock_irqsave(&fh->vdev->fh_lock, flags); + found_ev = v4l2_event_subscribed(fh, sub->type, sub->id); + if (!found_ev) + list_add(&sev->list, &fh->subscribed); spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); - kfree(sev); + /* v4l2_ctrl_add_event uses a mutex, so do this outside the spin lock */ + if (found_ev) + kfree(sev); + else if (ctrl) + v4l2_ctrl_add_event(ctrl, sev); return 0; } EXPORT_SYMBOL_GPL(v4l2_event_subscribe); -static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh) +void v4l2_event_unsubscribe_all(struct v4l2_fh *fh) { - struct v4l2_events *events = fh->events; + struct v4l2_event_subscription sub; struct v4l2_subscribed_event *sev; unsigned long flags; @@ -263,15 +264,18 @@ static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh) sev = NULL; spin_lock_irqsave(&fh->vdev->fh_lock, flags); - if (!list_empty(&events->subscribed)) { - sev = list_first_entry(&events->subscribed, - struct v4l2_subscribed_event, list); - list_del(&sev->list); + if (!list_empty(&fh->subscribed)) { + sev = list_first_entry(&fh->subscribed, + struct v4l2_subscribed_event, list); + sub.type = sev->type; + sub.id = sev->id; } spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); - kfree(sev); + if (sev) + v4l2_event_unsubscribe(fh, &sub); } while (sev); } +EXPORT_SYMBOL_GPL(v4l2_event_unsubscribe_all); int v4l2_event_unsubscribe(struct v4l2_fh *fh, struct v4l2_event_subscription *sub) @@ -286,11 +290,19 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh, spin_lock_irqsave(&fh->vdev->fh_lock, flags); - sev = v4l2_event_subscribed(fh, sub->type); - if (sev != NULL) + sev = v4l2_event_subscribed(fh, sub->type, sub->id); + if (sev != NULL) { list_del(&sev->list); + sev->fh = NULL; + } spin_unlock_irqrestore(&fh->vdev->fh_lock, flags); + if (sev && sev->type == V4L2_EVENT_CTRL) { + struct v4l2_ctrl *ctrl = v4l2_ctrl_find(fh->ctrl_handler, sev->id); + + if (ctrl) + v4l2_ctrl_del_event(ctrl, sev); + } kfree(sev); diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/video/v4l2-fh.c index 717f71e..122822d 100644 --- a/drivers/media/video/v4l2-fh.c +++ b/drivers/media/video/v4l2-fh.c @@ -29,23 +29,18 @@ #include <media/v4l2-event.h> #include <media/v4l2-ioctl.h> -int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) +void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) { fh->vdev = vdev; + /* Inherit from video_device. May be overridden by the driver. */ + fh->ctrl_handler = vdev->ctrl_handler; INIT_LIST_HEAD(&fh->list); set_bit(V4L2_FL_USES_V4L2_FH, &fh->vdev->flags); fh->prio = V4L2_PRIORITY_UNSET; - - /* - * fh->events only needs to be initialized if the driver - * supports the VIDIOC_SUBSCRIBE_EVENT ioctl. - */ - if (vdev->ioctl_ops && vdev->ioctl_ops->vidioc_subscribe_event) - return v4l2_event_init(fh); - - fh->events = NULL; - - return 0; + init_waitqueue_head(&fh->wait); + INIT_LIST_HEAD(&fh->available); + INIT_LIST_HEAD(&fh->subscribed); + fh->sequence = -1; } EXPORT_SYMBOL_GPL(v4l2_fh_init); @@ -91,10 +86,8 @@ void v4l2_fh_exit(struct v4l2_fh *fh) { if (fh->vdev == NULL) return; - + v4l2_event_unsubscribe_all(fh); fh->vdev = NULL; - - v4l2_event_free(fh); } EXPORT_SYMBOL_GPL(v4l2_fh_exit); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 69e8c6f..002ce13 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/types.h> #include <linux/kernel.h> +#include <linux/version.h> #include <linux/videodev2.h> @@ -542,12 +543,12 @@ static long __video_do_ioctl(struct file *file, struct v4l2_fh *vfh = NULL; struct v4l2_format f_copy; int use_fh_prio = 0; - long ret = -EINVAL; + long ret = -ENOTTY; if (ops == NULL) { printk(KERN_WARNING "videodev: \"%s\" has no ioctl_ops.\n", vfd->name); - return -EINVAL; + return ret; } if ((vfd->debug & V4L2_DEBUG_IOCTL) && @@ -605,6 +606,7 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_querycap) break; + cap->version = LINUX_VERSION_CODE; ret = ops->vidioc_querycap(file, fh, cap); if (!ret) dbgarg(cmd, "driver=%s, card=%s, bus=%s, " @@ -1418,7 +1420,9 @@ static long __video_do_ioctl(struct file *file, { struct v4l2_queryctrl *p = arg; - if (vfd->ctrl_handler) + if (vfh && vfh->ctrl_handler) + ret = v4l2_queryctrl(vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) ret = v4l2_queryctrl(vfd->ctrl_handler, p); else if (ops->vidioc_queryctrl) ret = ops->vidioc_queryctrl(file, fh, p); @@ -1438,7 +1442,9 @@ static long __video_do_ioctl(struct file *file, { struct v4l2_control *p = arg; - if (vfd->ctrl_handler) + if (vfh && vfh->ctrl_handler) + ret = v4l2_g_ctrl(vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) ret = v4l2_g_ctrl(vfd->ctrl_handler, p); else if (ops->vidioc_g_ctrl) ret = ops->vidioc_g_ctrl(file, fh, p); @@ -1470,14 +1476,18 @@ static long __video_do_ioctl(struct file *file, struct v4l2_ext_controls ctrls; struct v4l2_ext_control ctrl; - if (!vfd->ctrl_handler && + if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler && !ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls) break; dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value); + if (vfh && vfh->ctrl_handler) { + ret = v4l2_s_ctrl(vfh, vfh->ctrl_handler, p); + break; + } if (vfd->ctrl_handler) { - ret = v4l2_s_ctrl(vfd->ctrl_handler, p); + ret = v4l2_s_ctrl(NULL, vfd->ctrl_handler, p); break; } if (ops->vidioc_s_ctrl) { @@ -1501,7 +1511,9 @@ static long __video_do_ioctl(struct file *file, struct v4l2_ext_controls *p = arg; p->error_idx = p->count; - if (vfd->ctrl_handler) + if (vfh && vfh->ctrl_handler) + ret = v4l2_g_ext_ctrls(vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p); else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0)) ret = ops->vidioc_g_ext_ctrls(file, fh, p); @@ -1515,11 +1527,14 @@ static long __video_do_ioctl(struct file *file, struct v4l2_ext_controls *p = arg; p->error_idx = p->count; - if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls) + if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler && + !ops->vidioc_s_ext_ctrls) break; v4l_print_ext_ctrls(cmd, vfd, p, 1); - if (vfd->ctrl_handler) - ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p); + if (vfh && vfh->ctrl_handler) + ret = v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) + ret = v4l2_s_ext_ctrls(NULL, vfd->ctrl_handler, p); else if (check_ext_ctrls(p, 0)) ret = ops->vidioc_s_ext_ctrls(file, fh, p); break; @@ -1529,10 +1544,13 @@ static long __video_do_ioctl(struct file *file, struct v4l2_ext_controls *p = arg; p->error_idx = p->count; - if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls) + if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler && + !ops->vidioc_try_ext_ctrls) break; v4l_print_ext_ctrls(cmd, vfd, p, 1); - if (vfd->ctrl_handler) + if (vfh && vfh->ctrl_handler) + ret = v4l2_try_ext_ctrls(vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p); else if (check_ext_ctrls(p, 0)) ret = ops->vidioc_try_ext_ctrls(file, fh, p); @@ -1542,7 +1560,9 @@ static long __video_do_ioctl(struct file *file, { struct v4l2_querymenu *p = arg; - if (vfd->ctrl_handler) + if (vfh && vfh->ctrl_handler) + ret = v4l2_querymenu(vfh->ctrl_handler, p); + else if (vfd->ctrl_handler) ret = v4l2_querymenu(vfd->ctrl_handler, p); else if (ops->vidioc_querymenu) ret = ops->vidioc_querymenu(file, fh, p); @@ -2276,7 +2296,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size, break; } *user_ptr = (void __user *)buf->m.planes; - *kernel_ptr = (void **)&buf->m.planes; + *kernel_ptr = (void *)&buf->m.planes; *array_size = sizeof(struct v4l2_plane) * buf->length; ret = 1; } @@ -2290,7 +2310,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size, if (ctrls->count != 0) { *user_ptr = (void __user *)ctrls->controls; - *kernel_ptr = (void **)&ctrls->controls; + *kernel_ptr = (void *)&ctrls->controls; *array_size = sizeof(struct v4l2_ext_control) * ctrls->count; ret = 1; diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c index 812729e..b7967c9 100644 --- a/drivers/media/video/v4l2-subdev.c +++ b/drivers/media/video/v4l2-subdev.c @@ -75,20 +75,7 @@ static int subdev_open(struct file *file) return ret; } - ret = v4l2_fh_init(&subdev_fh->vfh, vdev); - if (ret) - goto err; - - if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) { - ret = v4l2_event_init(&subdev_fh->vfh); - if (ret) - goto err; - - ret = v4l2_event_alloc(&subdev_fh->vfh, sd->nevents); - if (ret) - goto err; - } - + v4l2_fh_init(&subdev_fh->vfh, vdev); v4l2_fh_add(&subdev_fh->vfh); file->private_data = &subdev_fh->vfh; #if defined(CONFIG_MEDIA_CONTROLLER) @@ -155,25 +142,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg) switch (cmd) { case VIDIOC_QUERYCTRL: - return v4l2_queryctrl(sd->ctrl_handler, arg); + return v4l2_queryctrl(vfh->ctrl_handler, arg); case VIDIOC_QUERYMENU: - return v4l2_querymenu(sd->ctrl_handler, arg); + return v4l2_querymenu(vfh->ctrl_handler, arg); case VIDIOC_G_CTRL: - return v4l2_g_ctrl(sd->ctrl_handler, arg); + return v4l2_g_ctrl(vfh->ctrl_handler, arg); case VIDIOC_S_CTRL: - return v4l2_s_ctrl(sd->ctrl_handler, arg); + return v4l2_s_ctrl(vfh, vfh->ctrl_handler, arg); case VIDIOC_G_EXT_CTRLS: - return v4l2_g_ext_ctrls(sd->ctrl_handler, arg); + return v4l2_g_ext_ctrls(vfh->ctrl_handler, arg); case VIDIOC_S_EXT_CTRLS: - return v4l2_s_ext_ctrls(sd->ctrl_handler, arg); + return v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, arg); case VIDIOC_TRY_EXT_CTRLS: - return v4l2_try_ext_ctrls(sd->ctrl_handler, arg); + return v4l2_try_ext_ctrls(vfh->ctrl_handler, arg); case VIDIOC_DQEVENT: if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) @@ -297,7 +284,7 @@ static unsigned int subdev_poll(struct file *file, poll_table *wait) if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) return POLLERR; - poll_wait(file, &fh->events->wait, wait); + poll_wait(file, &fh->wait, wait); if (v4l2_event_pending(fh)) return POLLPRI; diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index ddb8f4b..f300dea 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -108,8 +108,9 @@ static struct scatterlist *videobuf_pages_to_sg(struct page **pages, if (PageHighMem(pages[0])) /* DMA to highmem pages might not work */ goto highmem; - sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset); - size -= PAGE_SIZE - offset; + sg_set_page(&sglist[0], pages[0], + min_t(size_t, PAGE_SIZE - offset, size), offset); + size -= min_t(size_t, PAGE_SIZE - offset, size); for (i = 1; i < nr_pages; i++) { if (NULL == pages[i]) goto nopage; diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c index 10a20d9..065f468 100644 --- a/drivers/media/video/videobuf2-dma-sg.c +++ b/drivers/media/video/videobuf2-dma-sg.c @@ -48,12 +48,10 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size) buf->sg_desc.size = size; buf->sg_desc.num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - buf->sg_desc.sglist = vmalloc(buf->sg_desc.num_pages * + buf->sg_desc.sglist = vzalloc(buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist)); if (!buf->sg_desc.sglist) goto fail_sglist_alloc; - memset(buf->sg_desc.sglist, 0, buf->sg_desc.num_pages * - sizeof(*buf->sg_desc.sglist)); sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages); buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *), @@ -136,13 +134,11 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr, last = ((vaddr + size - 1) & PAGE_MASK) >> PAGE_SHIFT; buf->sg_desc.num_pages = last - first + 1; - buf->sg_desc.sglist = vmalloc( + buf->sg_desc.sglist = vzalloc( buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist)); if (!buf->sg_desc.sglist) goto userptr_fail_sglist_alloc; - memset(buf->sg_desc.sglist, 0, - buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist)); sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages); buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *), diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/video/videobuf2-memops.c index b03c3ae..569eeb3 100644 --- a/drivers/media/video/videobuf2-memops.c +++ b/drivers/media/video/videobuf2-memops.c @@ -176,7 +176,7 @@ int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr, vma->vm_ops->open(vma); - printk(KERN_DEBUG "%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n", + pr_debug("%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n", __func__, paddr, vma->vm_start, size); return 0; @@ -194,7 +194,7 @@ static void vb2_common_vm_open(struct vm_area_struct *vma) { struct vb2_vmarea_handler *h = vma->vm_private_data; - printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n", + pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", __func__, h, atomic_read(h->refcount), vma->vm_start, vma->vm_end); @@ -212,7 +212,7 @@ static void vb2_common_vm_close(struct vm_area_struct *vma) { struct vb2_vmarea_handler *h = vma->vm_private_data; - printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n", + pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n", __func__, h, atomic_read(h->refcount), vma->vm_start, vma->vm_end); diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index d63e9d9..52a0a37 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -36,7 +36,6 @@ #include <linux/slab.h> #include <linux/mm.h> #include <linux/time.h> -#include <linux/version.h> #include <linux/kmod.h> #include <linux/i2c.h> @@ -61,8 +60,7 @@ // #define VINO_DEBUG // #define VINO_DEBUG_INT -#define VINO_MODULE_VERSION "0.0.6" -#define VINO_VERSION_CODE KERNEL_VERSION(0, 0, 6) +#define VINO_MODULE_VERSION "0.0.7" MODULE_DESCRIPTION("SGI VINO Video4Linux2 driver"); MODULE_VERSION(VINO_MODULE_VERSION); @@ -2934,7 +2932,6 @@ static int vino_querycap(struct file *file, void *__fh, strcpy(cap->driver, vino_driver_name); strcpy(cap->card, vino_driver_description); strcpy(cap->bus_info, vino_bus_name); - cap->version = VINO_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 2238a61..a848bd2 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -22,7 +22,6 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/font.h> -#include <linux/version.h> #include <linux/mutex.h> #include <linux/videodev2.h> #include <linux/kthread.h> @@ -32,6 +31,7 @@ #include <media/v4l2-ioctl.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-fh.h> +#include <media/v4l2-event.h> #include <media/v4l2-common.h> #define VIVI_MODULE_NAME "vivi" @@ -44,15 +44,12 @@ #define MAX_WIDTH 1920 #define MAX_HEIGHT 1200 -#define VIVI_MAJOR_VERSION 0 -#define VIVI_MINOR_VERSION 8 -#define VIVI_RELEASE 0 -#define VIVI_VERSION \ - KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE) +#define VIVI_VERSION "0.8.1" MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board"); MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(VIVI_VERSION); static unsigned video_nr = -1; module_param(video_nr, uint, 0644); @@ -167,6 +164,11 @@ struct vivi_dev { struct v4l2_ctrl *contrast; struct v4l2_ctrl *saturation; struct v4l2_ctrl *hue; + struct { + /* autogain/gain cluster */ + struct v4l2_ctrl *autogain; + struct v4l2_ctrl *gain; + }; struct v4l2_ctrl *volume; struct v4l2_ctrl *button; struct v4l2_ctrl *boolean; @@ -174,6 +176,7 @@ struct vivi_dev { struct v4l2_ctrl *int64; struct v4l2_ctrl *menu; struct v4l2_ctrl *string; + struct v4l2_ctrl *bitmask; spinlock_t slock; struct mutex mutex; @@ -457,6 +460,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) unsigned ms; char str[100]; int h, line = 1; + s32 gain; if (!vbuf) return; @@ -479,6 +483,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) dev->width, dev->height, dev->input); gen_text(dev, vbuf, line++ * 16, 16, str); + gain = v4l2_ctrl_g_ctrl(dev->gain); mutex_lock(&dev->ctrl_handler.lock); snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ", dev->brightness->cur.val, @@ -486,11 +491,13 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) dev->saturation->cur.val, dev->hue->cur.val); gen_text(dev, vbuf, line++ * 16, 16, str); - snprintf(str, sizeof(str), " volume %3d ", dev->volume->cur.val); + snprintf(str, sizeof(str), " autogain %d, gain %3d, volume %3d ", + dev->autogain->cur.val, gain, dev->volume->cur.val); gen_text(dev, vbuf, line++ * 16, 16, str); - snprintf(str, sizeof(str), " int32 %d, int64 %lld ", + snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ", dev->int32->cur.val, - dev->int64->cur.val64); + dev->int64->cur.val64, + dev->bitmask->cur.val); gen_text(dev, vbuf, line++ * 16, 16, str); snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ", dev->boolean->cur.val, @@ -524,11 +531,13 @@ static void vivi_thread_tick(struct vivi_dev *dev) spin_lock_irqsave(&dev->slock, flags); if (list_empty(&dma_q->active)) { dprintk(dev, 1, "No active queue to serve\n"); - goto unlock; + spin_unlock_irqrestore(&dev->slock, flags); + return; } buf = list_entry(dma_q->active.next, struct vivi_buffer, list); list_del(&buf->list); + spin_unlock_irqrestore(&dev->slock, flags); do_gettimeofday(&buf->vb.v4l2_buf.timestamp); @@ -538,8 +547,6 @@ static void vivi_thread_tick(struct vivi_dev *dev) vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE); dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index); -unlock: - spin_unlock_irqrestore(&dev->slock, flags); } #define frames_to_ms(frames) \ @@ -812,7 +819,6 @@ static int vidioc_querycap(struct file *file, void *priv, strcpy(cap->driver, "vivi"); strcpy(cap->card, "vivi"); strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); - cap->version = VIVI_VERSION; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \ V4L2_CAP_READWRITE; return 0; @@ -975,14 +981,37 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) if (i >= NUM_INPUTS) return -EINVAL; + if (i == dev->input) + return 0; + dev->input = i; precalculate_bars(dev); precalculate_line(dev); return 0; } +static int vidioc_subscribe_event(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_CTRL: + return v4l2_event_subscribe(fh, sub, 0); + default: + return -EINVAL; + } +} + /* --- controls ---------------------------------------------- */ +static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler); + + if (ctrl == dev->autogain) + dev->gain->val = jiffies & 0xff; + return 0; +} + static int vivi_s_ctrl(struct v4l2_ctrl *ctrl) { struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler); @@ -1010,10 +1039,17 @@ static unsigned int vivi_poll(struct file *file, struct poll_table_struct *wait) { struct vivi_dev *dev = video_drvdata(file); + struct v4l2_fh *fh = file->private_data; struct vb2_queue *q = &dev->vb_vidq; + unsigned int res; dprintk(dev, 1, "%s\n", __func__); - return vb2_poll(q, file, wait); + res = vb2_poll(q, file, wait); + if (v4l2_event_pending(fh)) + res |= POLLPRI; + else + poll_wait(file, &fh->wait, wait); + return res; } static int vivi_close(struct file *file) @@ -1045,6 +1081,7 @@ static int vivi_mmap(struct file *file, struct vm_area_struct *vma) } static const struct v4l2_ctrl_ops vivi_ctrl_ops = { + .g_volatile_ctrl = vivi_g_volatile_ctrl, .s_ctrl = vivi_s_ctrl, }; @@ -1117,9 +1154,20 @@ static const struct v4l2_ctrl_config vivi_ctrl_string = { .step = 1, }; +static const struct v4l2_ctrl_config vivi_ctrl_bitmask = { + .ops = &vivi_ctrl_ops, + .id = VIVI_CID_CUSTOM_BASE + 6, + .name = "Bitmask", + .type = V4L2_CTRL_TYPE_BITMASK, + .def = 0x80002000, + .min = 0, + .max = 0x80402010, + .step = 0, +}; + static const struct v4l2_file_operations vivi_fops = { .owner = THIS_MODULE, - .open = v4l2_fh_open, + .open = v4l2_fh_open, .release = vivi_close, .read = vivi_read, .poll = vivi_poll, @@ -1143,6 +1191,8 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = { .vidioc_s_input = vidioc_s_input, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, + .vidioc_subscribe_event = vidioc_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; static struct video_device vivi_template = { @@ -1213,16 +1263,22 @@ static int __init vivi_create_instance(int inst) V4L2_CID_SATURATION, 0, 255, 1, 127); dev->hue = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, V4L2_CID_HUE, -128, 127, 1, 0); + dev->autogain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_AUTOGAIN, 0, 1, 1, 1); + dev->gain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops, + V4L2_CID_GAIN, 0, 255, 1, 100); dev->button = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_button, NULL); dev->int32 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int32, NULL); dev->int64 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int64, NULL); dev->boolean = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_boolean, NULL); dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL); dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL); + dev->bitmask = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_bitmask, NULL); if (hdl->error) { ret = hdl->error; goto unreg_dev; } + v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true); dev->v4l2_dev.ctrl_handler = hdl; /* initialize locks */ @@ -1325,9 +1381,8 @@ static int __init vivi_init(void) } printk(KERN_INFO "Video Technology Magazine Virtual Video " - "Capture Board ver %u.%u.%u successfully loaded.\n", - (VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF, - VIVI_VERSION & 0xFF); + "Capture Board ver %s successfully loaded.\n", + VIVI_VERSION); /* n_devs will reflect the actual number of allocated devices */ n_devs = i; diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index fa35639..453dbbd 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -57,7 +57,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/version.h> #include <linux/videodev2.h> #include <linux/slab.h> #include <media/v4l2-common.h> @@ -127,7 +126,7 @@ struct w9966 { MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>"); MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)"); MODULE_LICENSE("GPL"); - +MODULE_VERSION("0.33.1"); #ifdef MODULE static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""}; @@ -568,7 +567,6 @@ static int cam_querycap(struct file *file, void *priv, strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver)); strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card)); strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info)); - vcap->version = KERNEL_VERSION(0, 33, 0); vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; return 0; } diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index f3f6400..d7166af 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -41,10 +41,6 @@ struct zoran_sync { }; -#define MAJOR_VERSION 0 /* driver major version */ -#define MINOR_VERSION 10 /* driver minor version */ -#define RELEASE_VERSION 0 /* release version */ - #define ZORAN_NAME "ZORAN" /* name of the device */ #define ZR_DEVNAME(zr) ((zr)->name) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 79b04ac..c3602d6 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -123,9 +123,12 @@ int zr36067_debug = 1; module_param_named(debug, zr36067_debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-5)"); +#define ZORAN_VERSION "0.10.1" + MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); MODULE_AUTHOR("Serguei Miridonov"); MODULE_LICENSE("GPL"); +MODULE_VERSION(ZORAN_VERSION); #define ZR_DEVICE(subven, subdev, data) { \ .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ @@ -1459,8 +1462,8 @@ static int __init zoran_init(void) { int res; - printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n", - MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION); + printk(KERN_INFO "Zoran MJPEG board driver version %s\n", + ZORAN_VERSION); /* check the parameters we have been given, adjust if necessary */ if (v4l_nbufs < 2) diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 2771d81..d4d05d2 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -44,7 +44,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/version.h> #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> @@ -1538,8 +1537,6 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability strncpy(cap->driver, "zoran", sizeof(cap->driver)-1); snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", pci_name(zr->pci_dev)); - cap->version = KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION, - RELEASE_VERSION); cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OVERLAY; return 0; diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 7dfb01e..c492846 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -29,7 +29,6 @@ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/usb.h> #include <linux/vmalloc.h> @@ -42,8 +41,7 @@ /* Version Information */ -#define DRIVER_VERSION "v0.73" -#define ZR364XX_VERSION_CODE KERNEL_VERSION(0, 7, 3) +#define DRIVER_VERSION "0.7.4" #define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" #define DRIVER_DESC "Zoran 364xx" @@ -744,7 +742,6 @@ static int zr364xx_vidioc_querycap(struct file *file, void *priv, strlcpy(cap->card, cam->udev->product, sizeof(cap->card)); strlcpy(cap->bus_info, dev_name(&cam->udev->dev), sizeof(cap->bus_info)); - cap->version = ZR364XX_VERSION_CODE; cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; @@ -1721,3 +1718,4 @@ module_exit(zr364xx_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); |
