diff options
Diffstat (limited to 'drivers/media')
66 files changed, 3867 insertions, 710 deletions
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 7eb1bf7..2f0e550 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -165,6 +165,8 @@ struct mxl5007t_state { struct reg_pair_t tab_init_cable[ARRAY_SIZE(init_tab_cable)]; struct reg_pair_t tab_rftune[ARRAY_SIZE(reg_pair_rftune)]; + enum mxl5007t_if_freq if_freq; + u32 frequency; u32 bandwidth; }; @@ -286,6 +288,8 @@ static void mxl5007t_set_if_freq_bits(struct mxl5007t_state *state, /* set inverted IF or normal IF */ set_reg_bits(state->tab_init, 0x02, 0x10, invert_if ? 0x10 : 0x00); + state->if_freq = if_freq; + return; } @@ -737,6 +741,50 @@ static int mxl5007t_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +static int mxl5007t_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct mxl5007t_state *state = fe->tuner_priv; + + *frequency = 0; + + switch (state->if_freq) { + case MxL_IF_4_MHZ: + *frequency = 4000000; + break; + case MxL_IF_4_5_MHZ: + *frequency = 4500000; + break; + case MxL_IF_4_57_MHZ: + *frequency = 4570000; + break; + case MxL_IF_5_MHZ: + *frequency = 5000000; + break; + case MxL_IF_5_38_MHZ: + *frequency = 5380000; + break; + case MxL_IF_6_MHZ: + *frequency = 6000000; + break; + case MxL_IF_6_28_MHZ: + *frequency = 6280000; + break; + case MxL_IF_9_1915_MHZ: + *frequency = 9191500; + break; + case MxL_IF_35_25_MHZ: + *frequency = 35250000; + break; + case MxL_IF_36_15_MHZ: + *frequency = 36150000; + break; + case MxL_IF_44_MHZ: + *frequency = 44000000; + break; + } + return 0; +} + static int mxl5007t_release(struct dvb_frontend *fe) { struct mxl5007t_state *state = fe->tuner_priv; @@ -766,6 +814,7 @@ static struct dvb_tuner_ops mxl5007t_tuner_ops = { .get_frequency = mxl5007t_get_frequency, .get_bandwidth = mxl5007t_get_bandwidth, .release = mxl5007t_release, + .get_if_frequency = mxl5007t_get_if_frequency, }; static int mxl5007t_get_chip_id(struct mxl5007t_state *state) diff --git a/drivers/media/common/tuners/tda18212.c b/drivers/media/common/tuners/tda18212.c index e29cc2bc1..6374a1e 100644 --- a/drivers/media/common/tuners/tda18212.c +++ b/drivers/media/common/tuners/tda18212.c @@ -136,12 +136,24 @@ static int tda18212_set_params(struct dvb_frontend *fe, int ret, i; u32 if_khz; u8 buf[9]; + #define DVBT_6 0 + #define DVBT_7 1 + #define DVBT_8 2 + #define DVBT2_6 3 + #define DVBT2_7 4 + #define DVBT2_8 5 + #define DVBC_6 6 + #define DVBC_8 7 static const u8 bw_params[][3] = { - /* 0f 13 23 */ - { 0xb3, 0x20, 0x03 }, /* DVB-T 6 MHz */ - { 0xb3, 0x31, 0x01 }, /* DVB-T 7 MHz */ - { 0xb3, 0x22, 0x01 }, /* DVB-T 8 MHz */ - { 0x92, 0x53, 0x03 }, /* DVB-C */ + /* reg: 0f 13 23 */ + [DVBT_6] = { 0xb3, 0x20, 0x03 }, + [DVBT_7] = { 0xb3, 0x31, 0x01 }, + [DVBT_8] = { 0xb3, 0x22, 0x01 }, + [DVBT2_6] = { 0xbc, 0x20, 0x03 }, + [DVBT2_7] = { 0xbc, 0x72, 0x03 }, + [DVBT2_8] = { 0xbc, 0x22, 0x01 }, + [DVBC_6] = { 0x92, 0x50, 0x03 }, + [DVBC_8] = { 0x92, 0x53, 0x03 }, }; dbg("delsys=%d RF=%d BW=%d\n", @@ -155,15 +167,34 @@ static int tda18212_set_params(struct dvb_frontend *fe, switch (c->bandwidth_hz) { case 6000000: if_khz = priv->cfg->if_dvbt_6; - i = 0; + i = DVBT_6; break; case 7000000: if_khz = priv->cfg->if_dvbt_7; - i = 1; + i = DVBT_7; break; case 8000000: if_khz = priv->cfg->if_dvbt_8; - i = 2; + i = DVBT_8; + break; + default: + ret = -EINVAL; + goto error; + } + break; + case SYS_DVBT2: + switch (c->bandwidth_hz) { + case 6000000: + if_khz = priv->cfg->if_dvbt2_6; + i = DVBT2_6; + break; + case 7000000: + if_khz = priv->cfg->if_dvbt2_7; + i = DVBT2_7; + break; + case 8000000: + if_khz = priv->cfg->if_dvbt2_8; + i = DVBT2_8; break; default: ret = -EINVAL; @@ -172,7 +203,7 @@ static int tda18212_set_params(struct dvb_frontend *fe, break; case SYS_DVBC_ANNEX_AC: if_khz = priv->cfg->if_dvbc; - i = 3; + i = DVBC_8; break; default: ret = -EINVAL; diff --git a/drivers/media/common/tuners/tda18212.h b/drivers/media/common/tuners/tda18212.h index 83b497f..9bd5da4 100644 --- a/drivers/media/common/tuners/tda18212.h +++ b/drivers/media/common/tuners/tda18212.h @@ -29,6 +29,10 @@ struct tda18212_config { u16 if_dvbt_6; u16 if_dvbt_7; u16 if_dvbt_8; + u16 if_dvbt2_5; + u16 if_dvbt2_6; + u16 if_dvbt2_7; + u16 if_dvbt2_8; u16 if_dvbc; }; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 63cc400..3347c5b 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -994,6 +994,7 @@ static int tda18271_set_params(struct dvb_frontend *fe, if (tda_fail(ret)) goto fail; + priv->if_freq = map->if_freq; priv->frequency = freq; priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0; @@ -1050,6 +1051,7 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, if (tda_fail(ret)) goto fail; + priv->if_freq = map->if_freq; priv->frequency = freq; priv->bandwidth = 0; fail: @@ -1086,6 +1088,13 @@ static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +static int tda18271_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda18271_priv *priv = fe->tuner_priv; + *frequency = (u32)priv->if_freq * 1000; + return 0; +} + /* ------------------------------------------------------------------ */ #define tda18271_update_std(std_cfg, name) do { \ @@ -1245,6 +1254,7 @@ static const struct dvb_tuner_ops tda18271_tuner_ops = { .set_config = tda18271_set_config, .get_frequency = tda18271_get_frequency, .get_bandwidth = tda18271_get_bandwidth, + .get_if_frequency = tda18271_get_if_frequency, }; struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h index 94340f4..454c152 100644 --- a/drivers/media/common/tuners/tda18271-priv.h +++ b/drivers/media/common/tuners/tda18271-priv.h @@ -122,6 +122,8 @@ struct tda18271_priv { struct mutex lock; + u16 if_freq; + u32 frequency; u32 bandwidth; }; diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index f8ee29e..4092200 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -751,6 +751,17 @@ static int simple_set_radio_freq(struct dvb_frontend *fe, if (4 != rc) tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); + /* Write AUX byte */ + switch (priv->type) { + case TUNER_PHILIPS_FM1216ME_MK3: + buffer[2] = 0x98; + buffer[3] = 0x20; /* set TOP AGC */ + rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); + if (4 != rc) + tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); + break; + } + return 0; } diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index aa1b2e8..048f489 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -628,20 +628,12 @@ static void xc_debug_dump(struct xc5000_priv *priv) dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); } -/* - * As defined on EN 300 429, the DVB-C roll-off factor is 0.15. - * So, the amount of the needed bandwith is given by: - * Bw = Symbol_rate * (1 + 0.15) - * As such, the maximum symbol rate supported by 6 MHz is given by: - * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds - */ -#define MAX_SYMBOL_RATE_6MHz 5217391 - static int xc5000_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct xc5000_priv *priv = fe->tuner_priv; int ret; + u32 bw; if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { @@ -707,11 +699,19 @@ static int xc5000_set_params(struct dvb_frontend *fe, dprintk(1, "%s() QAM modulation\n", __func__); priv->rf_mode = XC_RF_MODE_CABLE; /* - * Using a 8MHz bandwidth sometimes fail - * with 6MHz-spaced channels, due to inter-carrier - * interference. So, use DTV6 firmware + * Using a higher bandwidth at the tuner filter may + * allow inter-carrier interference. + * So, determine the minimal channel spacing, in order + * to better adjust the tuner filter. + * According with ITU-T J.83, the bandwidth is given by: + * bw = Simbol Rate * (1 + roll_off), where the roll_off + * is equal to 0.15 for Annex A, and 0.13 for annex C */ - if (params->u.qam.symbol_rate <= MAX_SYMBOL_RATE_6MHz) { + if (fe->dtv_property_cache.rolloff == ROLLOFF_13) + bw = (params->u.qam.symbol_rate * 13) / 10; + else + bw = (params->u.qam.symbol_rate * 15) / 10; + if (bw <= 6000000) { priv->bandwidth = BANDWIDTH_6_MHZ; priv->video_standard = DTV6; priv->freq_hz = params->frequency - 1750000; @@ -968,6 +968,14 @@ static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) return 0; } +static int xc5000_get_if_frequency(struct dvb_frontend *fe, u32 *freq) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + *freq = priv->if_khz * 1000; + return 0; +} + static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) { struct xc5000_priv *priv = fe->tuner_priv; @@ -996,6 +1004,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret = 0; + mutex_lock(&xc5000_list_mutex); + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) @@ -1015,6 +1025,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) /* Default to "CABLE" mode */ ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + mutex_unlock(&xc5000_list_mutex); + return ret; } @@ -1108,6 +1120,7 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { .set_params = xc5000_set_params, .set_analog_params = xc5000_set_analog_params, .get_frequency = xc5000_get_frequency, + .get_if_frequency = xc5000_get_if_frequency, .get_bandwidth = xc5000_get_bandwidth, .get_status = xc5000_get_status }; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 2c0acdb..c849455 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -876,6 +876,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) c->symbol_rate = QAM_AUTO; c->code_rate_HP = FEC_AUTO; c->code_rate_LP = FEC_AUTO; + c->rolloff = ROLLOFF_AUTO; c->isdbt_partial_reception = -1; c->isdbt_sb_mode = -1; @@ -1030,6 +1031,7 @@ static void dtv_property_cache_init(struct dvb_frontend *fe, break; case FE_QAM: c->delivery_system = SYS_DVBC_ANNEX_AC; + c->rolloff = ROLLOFF_15; /* implied for Annex A */ break; case FE_OFDM: c->delivery_system = SYS_DVBT; diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 5825716..3e316f2 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -311,6 +311,7 @@ config DVB_USB_ANYSEE select DVB_STV0900 if !DVB_FE_CUSTOMISE select DVB_STV6110 if !DVB_FE_CUSTOMISE select DVB_ISL6423 if !DVB_FE_CUSTOMISE + select DVB_CXD2820R if !DVB_FE_CUSTOMISE help Say Y here to support the Anysee E30, Anysee E30 Plus or Anysee E30 C Plus DVB USB2.0 receiver. diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 5f2278b..c64eb56 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -41,6 +41,7 @@ #include "stv0900.h" #include "stv6110.h" #include "isl6423.h" +#include "cxd2820r.h" /* debug */ static int dvb_usb_anysee_debug; @@ -66,10 +67,12 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, if (mutex_lock_interruptible(&anysee_usb_mutex) < 0) return -EAGAIN; + deb_xfer(">>> "); + debug_dump(buf, slen, deb_xfer); + /* We need receive one message more after dvb_usb_generic_rw due to weird transaction flow, which is 1 x send + 2 x receive. */ ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0); - if (!ret) { /* receive 2nd answer */ ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, @@ -79,7 +82,10 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, err("%s: recv bulk message failed: %d", __func__, ret); else { deb_xfer("<<< "); - debug_dump(buf, act_len, deb_xfer); + debug_dump(buf, rlen, deb_xfer); + + if (buf[63] != 0x4f) + deb_info("%s: cmd failed\n", __func__); } } @@ -129,6 +135,29 @@ static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, return anysee_write_reg(d, reg, val); } +/* read single register with mask */ +static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val, + u8 mask) +{ + int ret, i; + u8 tmp; + + ret = anysee_read_reg(d, reg, &tmp); + if (ret) + return ret; + + tmp &= mask; + + /* find position of the first bit */ + for (i = 0; i < 8; i++) { + if ((mask >> i) & 0x01) + break; + } + *val = tmp >> i; + + return 0; +} + static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) { u8 buf[] = {CMD_GET_HW_INFO}; @@ -156,22 +185,6 @@ static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); } -static int anysee_init(struct dvb_usb_device *d) -{ - int ret; - /* LED light */ - ret = anysee_led_ctrl(d, 0x01, 0x03); - if (ret) - return ret; - - /* enable IR */ - ret = anysee_ir_ctrl(d, 1); - if (ret) - return ret; - - return 0; -} - /* I2C */ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) @@ -297,7 +310,7 @@ static struct tda10023_config anysee_tda10023_tda18212_config = { .pll_m = 12, .pll_p = 3, .pll_n = 1, - .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, + .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B, .deltaf = 0xba02, }; @@ -309,6 +322,17 @@ static struct tda18212_config anysee_tda18212_config = { .if_dvbc = 5000, }; +static struct tda18212_config anysee_tda18212_config2 = { + .i2c_address = 0x60 /* (0xc0 >> 1) */, + .if_dvbt_6 = 3550, + .if_dvbt_7 = 3700, + .if_dvbt_8 = 4150, + .if_dvbt2_6 = 3250, + .if_dvbt2_7 = 4000, + .if_dvbt2_8 = 4000, + .if_dvbc = 5000, +}; + static struct cx24116_config anysee_cx24116_config = { .demod_address = (0xaa >> 1), .mpg_clk_pos_pol = 0x00, @@ -339,6 +363,18 @@ static struct isl6423_config anysee_isl6423_config = { .addr = (0x10 >> 1), }; +static struct cxd2820r_config anysee_cxd2820r_config = { + .i2c_address = 0x6d, /* (0xda >> 1) */ + .ts_mode = 0x38, + .if_dvbt_6 = 3550, + .if_dvbt_7 = 3700, + .if_dvbt_8 = 4150, + .if_dvbt2_6 = 3250, + .if_dvbt2_7 = 4000, + .if_dvbt2_8 = 4000, + .if_dvbc = 5000, +}; + /* * New USB device strings: Mfr=1, Product=2, SerialNumber=0 * Manufacturer: AMT.CO.KR @@ -421,6 +457,14 @@ static struct isl6423_config anysee_isl6423_config = { * IOA[7] TS 1=enabled * IOE[5] STV0903 1=enabled * + * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)" + * PCB: 508T2C (rev0.3) + * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024 + * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff + * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 + * IOA[7] TS 1=enabled + * IOE[5] CXD2820R 1=enabled + * * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)" * PCB: 508PTC (rev0.5) * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) @@ -437,7 +481,7 @@ static struct isl6423_config anysee_isl6423_config = { * IOD[6] ZL10353 1=enabled * IOE[0] IF 0=enabled * - * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" + * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" * PCB: 508PS2 (rev0.4) * parts: DNBU10512IST(STV0903, STV6110), ISL6423 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff @@ -446,6 +490,16 @@ static struct isl6423_config anysee_isl6423_config = { * IOE[5] STV0903 1=enabled */ + +/* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */ +static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + /* enable / disable tuner access on IOE[4] */ + return anysee_wr_reg_mask(adap->dev, REG_IOE, (enable << 4), 0x10); +} + static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) { struct dvb_usb_adapter *adap = fe->dvb->priv; @@ -577,7 +631,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* detect hardware only once */ if (adap->fe_adap[0].fe == NULL) { /* Check which hardware we have. - * We must do this call two times to get reliable values (hw bug). + * We must do this call two times to get reliable values + * (hw/fw bug). */ ret = anysee_get_hw_info(adap->dev, hw_info); if (ret) @@ -606,14 +661,14 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) break; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(mt352_attach, &anysee_mt352_config, - &adap->dev->i2c_adap); + adap->fe_adap[0].fe = dvb_attach(mt352_attach, + &anysee_mt352_config, &adap->dev->i2c_adap); if (adap->fe_adap[0].fe) break; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &anysee_zl10353_config, - &adap->dev->i2c_adap); + adap->fe_adap[0].fe = dvb_attach(zl10353_attach, + &anysee_zl10353_config, &adap->dev->i2c_adap); break; case ANYSEE_HW_507CD: /* 6 */ @@ -665,8 +720,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) goto error; /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(cx24116_attach, &anysee_cx24116_config, - &adap->dev->i2c_adap); + adap->fe_adap[0].fe = dvb_attach(cx24116_attach, + &anysee_cx24116_config, &adap->dev->i2c_adap); break; case ANYSEE_HW_507FA: /* 15 */ @@ -747,17 +802,19 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) } } + /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + if (tmp == 0xc7) { + if (adap->fe_adap[state->fe_id].fe) + adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl = + anysee_i2c_gate_ctrl; + } + break; case ANYSEE_HW_508TC: /* 18 */ case ANYSEE_HW_508PTC: /* 21 */ /* E7 TC */ /* E7 PTC */ - /* enable transport stream on IOA[7] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); - if (ret) - goto error; - if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) { /* disable DVB-T demod on IOD[6] */ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6), @@ -772,7 +829,8 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) goto error; /* attach demod */ - adap->fe_adap[state->fe_id].fe = dvb_attach(tda10023_attach, + adap->fe_adap[state->fe_id].fe = + dvb_attach(tda10023_attach, &anysee_tda10023_tda18212_config, &adap->dev->i2c_adap, 0x48); } else { @@ -789,11 +847,19 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) goto error; /* attach demod */ - adap->fe_adap[state->fe_id].fe = dvb_attach(zl10353_attach, + adap->fe_adap[state->fe_id].fe = + dvb_attach(zl10353_attach, &anysee_zl10353_tda18212_config, &adap->dev->i2c_adap); } + /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ + if (adap->fe_adap[state->fe_id].fe) + adap->fe_adap[state->fe_id].fe->ops.i2c_gate_ctrl = + anysee_i2c_gate_ctrl; + + state->has_ci = true; + break; case ANYSEE_HW_508S2: /* 19 */ case ANYSEE_HW_508PS2: /* 22 */ @@ -803,19 +869,41 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) if (state->fe_id) break; - /* enable transport stream on IOA[7] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80); + /* enable DVB-S/S2 demod on IOE[5] */ + ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20); if (ret) goto error; - /* enable DVB-S/S2 demod on IOE[5] */ + /* attach demod */ + adap->fe_adap[0].fe = dvb_attach(stv0900_attach, + &anysee_stv0900_config, &adap->dev->i2c_adap, 0); + + state->has_ci = true; + + break; + case ANYSEE_HW_508T2C: /* 20 */ + /* E7 T2C */ + + /* enable DVB-T/T2/C demod on IOE[5] */ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 5), 0x20); if (ret) goto error; - /* attach demod */ - adap->fe_adap[0].fe = dvb_attach(stv0900_attach, &anysee_stv0900_config, - &adap->dev->i2c_adap, 0); + if (state->fe_id == 0) { + /* DVB-T/T2 */ + adap->fe_adap[state->fe_id].fe = + dvb_attach(cxd2820r_attach, + &anysee_cxd2820r_config, + &adap->dev->i2c_adap, NULL); + } else { + /* DVB-C */ + adap->fe_adap[state->fe_id].fe = + dvb_attach(cxd2820r_attach, + &anysee_cxd2820r_config, + &adap->dev->i2c_adap, adap->fe_adap[0].fe); + } + + state->has_ci = true; break; } @@ -842,24 +930,26 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* E30 */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc2 >> 1), - NULL, DVB_PLL_THOMSON_DTT7579); + fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, + (0xc2 >> 1), NULL, DVB_PLL_THOMSON_DTT7579); break; case ANYSEE_HW_507CD: /* 6 */ /* E30 Plus */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc2 >> 1), - &adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579); + fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, + (0xc2 >> 1), &adap->dev->i2c_adap, + DVB_PLL_THOMSON_DTT7579); break; case ANYSEE_HW_507DC: /* 10 */ /* E30 C Plus */ /* attach tuner */ - fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, (0xc0 >> 1), - &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); + fe = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, + (0xc0 >> 1), &adap->dev->i2c_adap, + DVB_PLL_SAMSUNG_DTOS403IH102A); break; case ANYSEE_HW_507SI: /* 11 */ @@ -877,22 +967,12 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* Try first attach TDA18212 silicon tuner on IOE[4], if that * fails attach old simple PLL. */ - /* enable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); - if (ret) - goto error; - /* attach tuner */ fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, &adap->dev->i2c_adap, &anysee_tda18212_config); if (fe) break; - /* disable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 4), 0x10); - if (ret) - goto error; - /* attach tuner */ fe = dvb_attach(dvb_pll_attach, adap->fe_adap[state->fe_id].fe, (0xc0 >> 1), &adap->dev->i2c_adap, @@ -904,11 +984,6 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) /* E7 TC */ /* E7 PTC */ - /* enable tuner on IOE[4] */ - ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10); - if (ret) - goto error; - /* attach tuner */ fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, &adap->dev->i2c_adap, &anysee_tda18212_config); @@ -930,6 +1005,15 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) } break; + + case ANYSEE_HW_508T2C: /* 20 */ + /* E7 T2C */ + + /* attach tuner */ + fe = dvb_attach(tda18212_attach, adap->fe_adap[state->fe_id].fe, + &adap->dev->i2c_adap, &anysee_tda18212_config2); + + break; default: fe = NULL; } @@ -939,7 +1023,6 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap) else ret = -ENODEV; -error: return ret; } @@ -969,6 +1052,201 @@ static int anysee_rc_query(struct dvb_usb_device *d) return 0; } +static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot, + int addr) +{ + struct dvb_usb_device *d = ci->data; + int ret; + u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1}; + u8 val; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); + if (ret) + return ret; + + return val; +} + +static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot, + int addr, u8 val) +{ + struct dvb_usb_device *d = ci->data; + int ret; + u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val}; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + if (ret) + return ret; + + return 0; +} + +static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot, + u8 addr) +{ + struct dvb_usb_device *d = ci->data; + int ret; + u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1}; + u8 val; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); + if (ret) + return ret; + + return val; +} + +static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot, + u8 addr, u8 val) +{ + struct dvb_usb_device *d = ci->data; + int ret; + u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val}; + + ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); + if (ret) + return ret; + + return 0; +} + +static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot) +{ + struct dvb_usb_device *d = ci->data; + int ret; + struct anysee_state *state = d->priv; + + state->ci_cam_ready = jiffies + msecs_to_jiffies(1000); + + ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); + if (ret) + return ret; + + msleep(300); + + ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); + if (ret) + return ret; + + return 0; +} + +static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot) +{ + struct dvb_usb_device *d = ci->data; + int ret; + + ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); + if (ret) + return ret; + + msleep(30); + + ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); + if (ret) + return ret; + + return 0; +} + +static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot) +{ + struct dvb_usb_device *d = ci->data; + int ret; + + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02); + if (ret) + return ret; + + return 0; +} + +static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, + int open) +{ + struct dvb_usb_device *d = ci->data; + struct anysee_state *state = d->priv; + int ret; + u8 tmp; + + ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40); + if (ret) + return ret; + + if (tmp == 0) { + ret = DVB_CA_EN50221_POLL_CAM_PRESENT; + if (time_after(jiffies, state->ci_cam_ready)) + ret |= DVB_CA_EN50221_POLL_CAM_READY; + } + + return ret; +} + +static int anysee_ci_init(struct dvb_usb_device *d) +{ + struct anysee_state *state = d->priv; + int ret; + + state->ci.owner = THIS_MODULE; + state->ci.read_attribute_mem = anysee_ci_read_attribute_mem; + state->ci.write_attribute_mem = anysee_ci_write_attribute_mem; + state->ci.read_cam_control = anysee_ci_read_cam_control; + state->ci.write_cam_control = anysee_ci_write_cam_control; + state->ci.slot_reset = anysee_ci_slot_reset; + state->ci.slot_shutdown = anysee_ci_slot_shutdown; + state->ci.slot_ts_enable = anysee_ci_slot_ts_enable; + state->ci.poll_slot_status = anysee_ci_poll_slot_status; + state->ci.data = d; + + ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); + if (ret) + return ret; + + ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1); + if (ret) + return ret; + + return 0; +} + +static void anysee_ci_release(struct dvb_usb_device *d) +{ + struct anysee_state *state = d->priv; + + /* detach CI */ + if (state->has_ci) + dvb_ca_en50221_release(&state->ci); + + return; +} + +static int anysee_init(struct dvb_usb_device *d) +{ + struct anysee_state *state = d->priv; + int ret; + + /* LED light */ + ret = anysee_led_ctrl(d, 0x01, 0x03); + if (ret) + return ret; + + /* enable IR */ + ret = anysee_ir_ctrl(d, 1); + if (ret) + return ret; + + /* attach CI */ + if (state->has_ci) { + ret = anysee_ci_init(d); + if (ret) { + state->has_ci = false; + return ret; + } + } + + return 0; +} + /* DVB USB Driver stuff */ static struct dvb_usb_device_properties anysee_properties; @@ -1010,6 +1288,16 @@ static int anysee_probe(struct usb_interface *intf, return anysee_init(d); } +static void anysee_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + + anysee_ci_release(d); + dvb_usb_device_exit(intf); + + return; +} + static struct usb_device_id anysee_table[] = { { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, @@ -1029,7 +1317,7 @@ static struct dvb_usb_device_properties anysee_properties = { { .num_frontends = 2, .frontend_ctrl = anysee_frontend_ctrl, - .fe = {{ + .fe = { { .streaming_ctrl = anysee_streaming_ctrl, .frontend_attach = anysee_frontend_attach, .tuner_attach = anysee_tuner_attach, @@ -1057,7 +1345,7 @@ static struct dvb_usb_device_properties anysee_properties = { } } }, - }}, + } }, } }, @@ -1087,7 +1375,7 @@ static struct dvb_usb_device_properties anysee_properties = { static struct usb_driver anysee_driver = { .name = "dvb_usb_anysee", .probe = anysee_probe, - .disconnect = dvb_usb_device_exit, + .disconnect = anysee_disconnect, .id_table = anysee_table, }; diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h index 57ee500..8ac8794 100644 --- a/drivers/media/dvb/dvb-usb/anysee.h +++ b/drivers/media/dvb/dvb-usb/anysee.h @@ -36,6 +36,7 @@ #define DVB_USB_LOG_PREFIX "anysee" #include "dvb-usb.h" +#include "dvb_ca_en50221.h" #define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args) #define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args) @@ -54,12 +55,16 @@ enum cmd { CMD_GET_IR_CODE = 0x41, CMD_GET_HW_INFO = 0x19, CMD_SMARTCARD = 0x34, + CMD_CI = 0x37, }; struct anysee_state { u8 hw; /* PCB ID */ u8 seq; u8 fe_id:1; /* frondend ID */ + u8 has_ci:1; + struct dvb_ca_en50221 ci; + unsigned long ci_cam_ready; /* jiffies */ }; #define ANYSEE_HW_507T 2 /* E30 */ @@ -69,6 +74,7 @@ struct anysee_state { #define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ #define ANYSEE_HW_508TC 18 /* E7 TC */ #define ANYSEE_HW_508S2 19 /* E7 S2 */ +#define ANYSEE_HW_508T2C 20 /* E7 T2C */ #define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ #define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2d08c9b..0040aa2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -322,6 +322,7 @@ #define USB_PID_TVWAY_PLUS 0x0002 #define USB_PID_SVEON_STV20 0xe39d #define USB_PID_SVEON_STV22 0xe401 +#define USB_PID_SVEON_STV22_IT9137 0xe411 #define USB_PID_AZUREWAVE_AZ6027 0x3275 #define USB_PID_TERRATEC_DVBS2CI_V1 0x10a4 #define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c index c462261..9abdaee 100644 --- a/drivers/media/dvb/dvb-usb/it913x.c +++ b/drivers/media/dvb/dvb-usb/it913x.c @@ -60,15 +60,6 @@ struct it913x_state { u8 id; }; -struct ite_config { - u8 chip_ver; - u16 chip_type; - u32 firmware; - u8 tuner_id_0; - u8 tuner_id_1; - u8 dual_mode; -}; - struct ite_config it913x_config; static int it913x_bulk_write(struct usb_device *dev, @@ -359,6 +350,19 @@ static int it913x_identify_state(struct usb_device *udev, /* checnk for dual mode */ it913x_config.dual_mode = it913x_read_reg(udev, 0x49c5); + if (udev->speed != USB_SPEED_HIGH) { + props->adapter[0].fe[0].pid_filter_count = 5; + info("USB 1 low speed mode - connect to USB 2 port"); + if (pid_filter > 0) + pid_filter = 0; + if (it913x_config.dual_mode) { + it913x_config.dual_mode = 0; + info("Dual mode not supported in USB 1"); + } + } else /* For replugging */ + if(props->adapter[0].fe[0].pid_filter_count == 5) + props->adapter[0].fe[0].pid_filter_count = 31; + /* TODO different remotes */ remote = it913x_read_reg(udev, 0x49ac); /* Remote */ if (remote == 0) @@ -390,8 +394,8 @@ static int it913x_identify_state(struct usb_device *udev, if (ret != 0) ret = it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0); + props->num_adapters = 2; } - props->num_adapters = 2; } else props->num_adapters = 1; @@ -474,12 +478,17 @@ static int it913x_download_firmware(struct usb_device *udev, /* Tuner function */ if (it913x_config.dual_mode) ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0); - - ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0); - ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0); - if (it913x_config.dual_mode) { - ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0); - ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0); + else + ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0x68); + + if ((it913x_config.chip_ver == 1) && + (it913x_config.chip_type == 0x9135)) { + ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0); + ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0); + if (it913x_config.dual_mode) { + ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0); + ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0); + } } return (ret < 0) ? -ENODEV : 0; @@ -501,31 +510,17 @@ static int it913x_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device *udev = adap->dev->udev; int ret = 0; - u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK); u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5); u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize; - u8 tuner_id, tuner_type; + u8 pkt_size = 0x80; - if (adap->id == 0) - tuner_id = it913x_config.tuner_id_0; - else - tuner_id = it913x_config.tuner_id_1; - - /* TODO we always use IT9137 possible references here*/ - /* Documentation suggests don't care */ - switch (tuner_id) { - case 0x51: - case 0x52: - case 0x60: - case 0x61: - case 0x62: - default: - case 0x38: - tuner_type = IT9137; - } + if (adap->dev->udev->speed != USB_SPEED_HIGH) + pkt_size = 0x10; + + it913x_config.adf = it913x_read_reg(udev, IO_MUX_POWER_CLK); adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach, - &adap->dev->i2c_adap, adap_addr, adf, tuner_type); + &adap->dev->i2c_adap, adap_addr, &it913x_config); if (adap->id == 0 && adap->fe_adap[0].fe) { ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1); @@ -536,13 +531,13 @@ static int it913x_frontend_attach(struct dvb_usb_adapter *adap) ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_LSB, ep_size & 0xff); ret = it913x_wr_reg(udev, DEV_0, EP4_TX_LEN_MSB, ep_size >> 8); - ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, 0x80); + ret = it913x_wr_reg(udev, DEV_0, EP4_MAX_PKT, pkt_size); } else if (adap->id == 1 && adap->fe_adap[0].fe) { ret = it913x_wr_reg(udev, DEV_0, EP0_TX_EN, 0x6f); ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_LSB, ep_size & 0xff); ret = it913x_wr_reg(udev, DEV_0, EP5_TX_LEN_MSB, ep_size >> 8); - ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, 0x80); + ret = it913x_wr_reg(udev, DEV_0, EP5_MAX_PKT, pkt_size); ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2IF2_EN, 0x1); ret = it913x_wr_reg(udev, DEV_1_DMOD, MP2IF_SERIAL, 0x1); ret = it913x_wr_reg(udev, DEV_1, TOP_HOSTB_SER_MODE, 0x1); @@ -582,6 +577,7 @@ static int it913x_probe(struct usb_interface *intf, static struct usb_device_id it913x_table[] = { { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) }, { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) }, + { USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137) }, {} /* Terminating entry */ }; @@ -657,7 +653,7 @@ static struct dvb_usb_device_properties it913x_properties = { .rc_codes = RC_MAP_KWORLD_315U, }, .i2c_algo = &it913x_i2c_algo, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "Kworld UB499-2T T09(IT9137)", { &it913x_table[0], NULL }, @@ -665,6 +661,9 @@ static struct dvb_usb_device_properties it913x_properties = { { "ITE 9135 Generic", { &it913x_table[1], NULL }, }, + { "Sveon STV22 Dual DVB-T HDTV(IT9137)", + { &it913x_table[2], NULL }, + }, } }; @@ -698,5 +697,5 @@ module_exit(it913x_module_exit); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("it913x USB 2 Driver"); -MODULE_VERSION("1.07"); +MODULE_VERSION("1.09"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c index a634105..3bfc6d8 100644 --- a/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c +++ b/drivers/media/dvb/dvb-usb/mxl111sf-tuner.c @@ -38,6 +38,8 @@ struct mxl111sf_tuner_state { struct mxl111sf_tuner_config *cfg; + enum mxl_if_freq if_freq; + u32 frequency; u32 bandwidth; }; @@ -186,7 +188,10 @@ static int mxl1x1sf_tuner_set_if_output_freq(struct mxl111sf_tuner_state *state) ctrl = iffcw & 0x00ff; #endif ret = mxl111sf_tuner_write_reg(state, V6_TUNER_IF_FCW_REG, ctrl); - mxl_fail(ret); + if (mxl_fail(ret)) + goto fail; + + state->if_freq = state->cfg->if_freq; fail: return ret; } @@ -407,6 +412,54 @@ static int mxl111sf_tuner_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +static int mxl111sf_tuner_get_if_frequency(struct dvb_frontend *fe, + u32 *frequency) +{ + struct mxl111sf_tuner_state *state = fe->tuner_priv; + + *frequency = 0; + + switch (state->if_freq) { + case MXL_IF_4_0: /* 4.0 MHz */ + *frequency = 4000000; + break; + case MXL_IF_4_5: /* 4.5 MHz */ + *frequency = 4500000; + break; + case MXL_IF_4_57: /* 4.57 MHz */ + *frequency = 4570000; + break; + case MXL_IF_5_0: /* 5.0 MHz */ + *frequency = 5000000; + break; + case MXL_IF_5_38: /* 5.38 MHz */ + *frequency = 5380000; + break; + case MXL_IF_6_0: /* 6.0 MHz */ + *frequency = 6000000; + break; + case MXL_IF_6_28: /* 6.28 MHz */ + *frequency = 6280000; + break; + case MXL_IF_7_2: /* 7.2 MHz */ + *frequency = 7200000; + break; + case MXL_IF_35_25: /* 35.25 MHz */ + *frequency = 35250000; + break; + case MXL_IF_36: /* 36 MHz */ + *frequency = 36000000; + break; + case MXL_IF_36_15: /* 36.15 MHz */ + *frequency = 36150000; + break; + case MXL_IF_44: /* 44 MHz */ + *frequency = 44000000; + break; + } + return 0; +} + static int mxl111sf_tuner_release(struct dvb_frontend *fe) { struct mxl111sf_tuner_state *state = fe->tuner_priv; @@ -436,6 +489,7 @@ static struct dvb_tuner_ops mxl111sf_tuner_tuner_ops = { .get_rf_strength = mxl111sf_get_rf_strength, .get_frequency = mxl111sf_tuner_get_frequency, .get_bandwidth = mxl111sf_tuner_get_bandwidth, + .get_if_frequency = mxl111sf_tuner_get_if_frequency, .release = mxl111sf_tuner_release, }; diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c index ea4eab8..faed393 100644 --- a/drivers/media/dvb/dvb-usb/ttusb2.c +++ b/drivers/media/dvb/dvb-usb/ttusb2.c @@ -75,10 +75,18 @@ static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { struct ttusb2_state *st = d->priv; - u8 s[wlen+4],r[64] = { 0 }; + u8 *s, *r = NULL; int ret = 0; - memset(s,0,wlen+4); + s = kzalloc(wlen+4, GFP_KERNEL); + if (!s) + return -ENOMEM; + + r = kzalloc(64, GFP_KERNEL); + if (!r) { + kfree(s); + return -ENOMEM; + } s[0] = 0xaa; s[1] = ++st->id; @@ -94,12 +102,17 @@ static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, r[2] != cmd || (rlen > 0 && r[3] != rlen)) { warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); + kfree(s); + kfree(r); return -EIO; } if (rlen > 0) memcpy(rbuf, &r[4], rlen); + kfree(s); + kfree(r); + return 0; } diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c index 1d57294..5c0d398 100644 --- a/drivers/media/dvb/frontends/au8522_dig.c +++ b/drivers/media/dvb/frontends/au8522_dig.c @@ -862,7 +862,36 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr) static int au8522_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { - return au8522_read_snr(fe, signal_strength); + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = au8522_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; } static int au8522_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h index 58baf41..e6d42e2 100644 --- a/drivers/media/dvb/frontends/drxk.h +++ b/drivers/media/dvb/frontends/drxk.h @@ -26,6 +26,8 @@ struct drxk_config { bool antenna_dvbt; u16 antenna_gpio; + int chunk_size; + const char *microcode_name; }; diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index f6431ef..95cbc98 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -681,7 +681,8 @@ static int init_state(struct drxk_state *state) state->m_hasOOB = false; state->m_hasAudio = false; - state->m_ChunkSize = 124; + if (!state->m_ChunkSize) + state->m_ChunkSize = 124; state->m_oscClockFreq = 0; state->m_smartAntInverted = false; @@ -6218,6 +6219,13 @@ static int drxk_set_parameters(struct dvb_frontend *fe, return -EINVAL; } + if (state->m_OperationMode == OM_QAM_ITU_A || + state->m_OperationMode == OM_QAM_ITU_C) { + if (fe->dtv_property_cache.rolloff == ROLLOFF_13) + state->m_OperationMode = OM_QAM_ITU_C; + else + state->m_OperationMode = OM_QAM_ITU_A; + } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -6423,6 +6431,7 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config, state->no_i2c_bridge = config->no_i2c_bridge; state->antenna_gpio = config->antenna_gpio; state->antenna_dvbt = config->antenna_dvbt; + state->m_ChunkSize = config->chunk_size; /* NOTE: as more UIO bits will be used, add them to the mask */ state->UIO_mask = config->antenna_gpio; diff --git a/drivers/media/dvb/frontends/it913x-fe-priv.h b/drivers/media/dvb/frontends/it913x-fe-priv.h index 1c6fb4b..836a5b8 100644 --- a/drivers/media/dvb/frontends/it913x-fe-priv.h +++ b/drivers/media/dvb/frontends/it913x-fe-priv.h @@ -153,8 +153,7 @@ struct table { }; static struct table fe_clockTable[] = { - {12000000, tab3}, /* FPGA */ - {16384000, tab6}, /* 16.38MHz */ + {12000000, tab3}, /* 12.00MHz */ {20480000, tab6}, /* 20.48MHz */ {36000000, tab3}, /* 36.00MHz */ {30000000, tab1}, /* 30.00MHz */ @@ -164,7 +163,6 @@ static struct table fe_clockTable[] = { {34000000, tab2}, /* 34.00MHz */ {24000000, tab1}, /* 24.00MHz */ {22000000, tab8}, /* 22.00MHz */ - {12000000, tab3} /* 12.00MHz */ }; /* fe get */ @@ -205,6 +203,10 @@ fe_modulation_t fe_con[] = { /* Standard demodulator functions */ static struct it913xset set_solo_fe[] = { + {PRO_LINK, GPIOH5_EN, {0x01}, 0x01}, + {PRO_LINK, GPIOH5_ON, {0x01}, 0x01}, + {PRO_LINK, GPIOH5_O, {0x00}, 0x01}, + {PRO_LINK, GPIOH5_O, {0x01}, 0x01}, {PRO_LINK, DVBT_INTEN, {0x04}, 0x01}, {PRO_LINK, DVBT_ENABLE, {0x05}, 0x01}, {PRO_DMOD, MP2IF_MPEG_PAR_MODE, {0x00}, 0x01}, @@ -233,8 +235,121 @@ static struct it913xset init_1[] = { {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ }; -/* ---------IT9137 0x38 tuner init---------- */ -static struct it913xset it9137_set[] = { + +/* Version 1 types */ +static struct it913xset it9135_v1[] = { + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a}, 0x01}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a}, 0x01}, + {PRO_DMOD, 0x008a, {0x01}, 0x01}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06}, 0x01}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009f, {0xe1}, 0x01}, + {PRO_DMOD, 0x00a0, {0xcf}, 0x01}, + {PRO_DMOD, 0x00a3, {0x01}, 0x01}, + {PRO_DMOD, 0x00a5, {0x01}, 0x01}, + {PRO_DMOD, 0x00a6, {0x01}, 0x01}, + {PRO_DMOD, 0x00a9, {0x00}, 0x01}, + {PRO_DMOD, 0x00aa, {0x01}, 0x01}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00c2, {0x05}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10}, 0x01}, + {PRO_DMOD, 0xf017, {0x04}, 0x01}, + {PRO_DMOD, 0xf018, {0x05}, 0x01}, + {PRO_DMOD, 0xf019, {0x04}, 0x01}, + {PRO_DMOD, 0xf01a, {0x05}, 0x01}, + {PRO_DMOD, 0xf021, {0x03}, 0x01}, + {PRO_DMOD, 0xf022, {0x0a}, 0x01}, + {PRO_DMOD, 0xf023, {0x0a}, 0x01}, + {PRO_DMOD, 0xf02b, {0x00}, 0x01}, + {PRO_DMOD, 0xf02c, {0x01}, 0x01}, + {PRO_DMOD, 0xf064, {0x03}, 0x01}, + {PRO_DMOD, 0xf065, {0xf9}, 0x01}, + {PRO_DMOD, 0xf066, {0x03}, 0x01}, + {PRO_DMOD, 0xf067, {0x01}, 0x01}, + {PRO_DMOD, 0xf06f, {0xe0}, 0x01}, + {PRO_DMOD, 0xf070, {0x03}, 0x01}, + {PRO_DMOD, 0xf072, {0x0f}, 0x01}, + {PRO_DMOD, 0xf073, {0x03}, 0x01}, + {PRO_DMOD, 0xf078, {0x00}, 0x01}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f}, 0x01}, + {PRO_DMOD, 0xf09c, {0x00}, 0x01}, + {PRO_DMOD, 0xf09d, {0x20}, 0x01}, + {PRO_DMOD, 0xf09e, {0x00}, 0x01}, + {PRO_DMOD, 0xf09f, {0x0c}, 0x01}, + {PRO_DMOD, 0xf0a0, {0x00}, 0x01}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00}, 0x01}, + {PRO_DMOD, 0xf14d, {0x00}, 0x01}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00}, 0x01}, + {PRO_DMOD, 0xf15b, {0x08}, 0x01}, + {PRO_DMOD, 0xf15d, {0x03}, 0x01}, + {PRO_DMOD, 0xf15e, {0x05}, 0x01}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01}, 0x01}, + {PRO_DMOD, 0xf167, {0x40}, 0x01}, + {PRO_DMOD, 0xf168, {0x0f}, 0x01}, + {PRO_DMOD, 0xf17a, {0x00}, 0x01}, + {PRO_DMOD, 0xf17b, {0x00}, 0x01}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36}, 0x01}, + {PRO_DMOD, 0xf1bd, {0x00}, 0x01}, + {PRO_DMOD, 0xf1cb, {0xa0}, 0x01}, + {PRO_DMOD, 0xf1cc, {0x01}, 0x01}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf40e, {0x0a}, 0x01}, + {PRO_DMOD, 0xf40f, {0x40}, 0x01}, + {PRO_DMOD, 0xf410, {0x08}, 0x01}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15}, 0x01}, + {PRO_DMOD, 0xf562, {0x20}, 0x01}, + {PRO_DMOD, 0xf5df, {0xfb}, 0x01}, + {PRO_DMOD, 0xf5e0, {0x00}, 0x01}, + {PRO_DMOD, 0xf5e3, {0x09}, 0x01}, + {PRO_DMOD, 0xf5e4, {0x01}, 0x01}, + {PRO_DMOD, 0xf5e5, {0x01}, 0x01}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05}, 0x01}, + {PRO_DMOD, 0xf601, {0x08}, 0x01}, + {PRO_DMOD, 0xf602, {0x0b}, 0x01}, + {PRO_DMOD, 0xf603, {0x0e}, 0x01}, + {PRO_DMOD, 0xf604, {0x11}, 0x01}, + {PRO_DMOD, 0xf605, {0x14}, 0x01}, + {PRO_DMOD, 0xf606, {0x17}, 0x01}, + {PRO_DMOD, 0xf607, {0x1f}, 0x01}, + {PRO_DMOD, 0xf60e, {0x00}, 0x01}, + {PRO_DMOD, 0xf60f, {0x04}, 0x01}, + {PRO_DMOD, 0xf610, {0x32}, 0x01}, + {PRO_DMOD, 0xf611, {0x10}, 0x01}, + {PRO_DMOD, 0xf707, {0xfc}, 0x01}, + {PRO_DMOD, 0xf708, {0x00}, 0x01}, + {PRO_DMOD, 0xf709, {0x37}, 0x01}, + {PRO_DMOD, 0xf70a, {0x00}, 0x01}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40}, 0x01}, + {PRO_DMOD, 0xf810, {0x54}, 0x01}, + {PRO_DMOD, 0xf811, {0x5a}, 0x01}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_38[] = { {PRO_DMOD, 0x0043, {0x00}, 0x01}, {PRO_DMOD, 0x0046, {0x38}, 0x01}, {PRO_DMOD, 0x0051, {0x01}, 0x01}, @@ -244,7 +359,7 @@ static struct it913xset it9137_set[] = { {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05}, {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc8, 0xb8, - 0xd0, 0xc3, 0x01 }, 0x0a}, + 0xd0, 0xc3, 0x01}, 0x0a}, {PRO_DMOD, 0x008e, {0x01}, 0x01}, {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, {PRO_DMOD, 0x0099, {0x01}, 0x01}, @@ -262,15 +377,25 @@ static struct it913xset it9137_set[] = { {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, {PRO_DMOD, 0x00fc, { 0x02, 0x02, 0x02, 0x09, 0x50, 0x7b, 0x77, - 0x00, 0x02, 0xc8, 0x05, 0x7b }, 0x0c}, + 0x00, 0x02, 0xc8, 0x05, 0x7b}, 0x0c}, {PRO_DMOD, 0x0109, {0x02}, 0x01}, - {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, - {PRO_DMOD, 0x011a, {0xc8, 0x7b, 0xbc, 0xa0}, 0x04}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xc8, 0x7b, 0x8a, 0xa0}, 0x04}, {PRO_DMOD, 0x0122, {0x02, 0x18, 0xc3}, 0x03}, {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, {PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05}, - {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc8}, 0x04}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc8, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0x00, 0x02, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, {PRO_DMOD, 0xf130, {0x04}, 0x01}, {PRO_DMOD, 0xf132, {0x04}, 0x01}, {PRO_DMOD, 0xf144, {0x1a}, 0x01}, @@ -301,7 +426,7 @@ static struct it913xset it9137_set[] = { {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, - 0x1f }, 0x08}, + 0x1f}, 0x08}, {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, {PRO_DMOD, 0xf78b, {0x01}, 0x01}, @@ -309,13 +434,578 @@ static struct it913xset it9137_set[] = { {PRO_DMOD, 0xf905, {0x01}, 0x01}, {PRO_DMOD, 0xfb06, {0x03}, 0x01}, {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, - {PRO_LINK, GPIOH5_EN, {0x01}, 0x01}, - {PRO_LINK, GPIOH5_ON, {0x01}, 0x01}, - {PRO_LINK, GPIOH5_O, {0x00}, 0x01}, - {PRO_LINK, GPIOH5_O, {0x01}, 0x01}, - {0xff, 0x0000, {0x00}, 0x00}, /* Terminating Entry */ + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_51[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x51}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x06, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xc8, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, + {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x02, 0x0a, 0x03, 0xc0, 0x96, + 0xcf, 0xc3, 0x01}, 0x0a}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03}, + {PRO_DMOD, 0x00c4, {0x00}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03}, + {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x02, 0x02, 0x09, 0x50, 0x7a, 0x77, + 0x01, 0x02, 0xb0, 0x02, 0x7a}, 0x0c}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xc0, 0x7a, 0xac, 0x8c}, 0x04}, + {PRO_DMOD, 0x0122, {0x02, 0x70, 0xa4}, 0x03}, + {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x01, 0x00, 0x07, 0x00, 0x06}, 0x05}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xc0, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_52[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x52}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x10}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0xa0, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04, 0x00}, 0x02}, + {PRO_DMOD, 0x0081, { 0x0a, 0x12, 0x03, 0x0a, 0x03, 0xb3, 0x97, + 0xc0, 0x9e, 0x01}, 0x0a}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3c}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05}, 0x03}, + {PRO_DMOD, 0x00c4, {0x00}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cc, {0x2e, 0x51, 0x33}, 0x03}, + {PRO_DMOD, 0x00f3, {0x05, 0x91, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x02, 0x02, 0x09, 0x50, 0x74, 0x77, + 0x02, 0x02, 0xae, 0x02, 0x6e}, 0x0c}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03, 0x02, 0x80}, 0x04}, + {PRO_DMOD, 0x011a, {0xcd, 0x62, 0xa4, 0x8c}, 0x04}, + {PRO_DMOD, 0x0122, {0x03, 0x18, 0x9e}, 0x03}, + {PRO_DMOD, 0x0127, {0x00, 0x07}, 0x02}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x00, 0x00, 0x07, 0x00, 0x06}, 0x05}, + {PRO_DMOD, 0x013d, {0x00, 0x01, 0x5b, 0xb6, 0x59}, 0x05}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf016, {0x10, 0x04, 0x05, 0x04, 0x05}, 0x05}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00, 0x03, 0x0a, 0x0a}, 0x05}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00, 0x01}, 0x04}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf085, {0xc0, 0x01, 0x00}, 0x03}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5df, {0xfb, 0x00}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf5f8, {0x01}, 0x01}, + {PRO_DMOD, 0xf5fd, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +/* Version 2 types */ +static struct it913xset it9135_v2[] = { + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a}, 0x01}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a}, 0x01}, + {PRO_DMOD, 0x008a, {0x01}, 0x01}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06}, 0x01}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009f, {0xe1}, 0x01}, + {PRO_DMOD, 0x00a0, {0xcf}, 0x01}, + {PRO_DMOD, 0x00a3, {0x01}, 0x01}, + {PRO_DMOD, 0x00a5, {0x01}, 0x01}, + {PRO_DMOD, 0x00a6, {0x01}, 0x01}, + {PRO_DMOD, 0x00a9, {0x00}, 0x01}, + {PRO_DMOD, 0x00aa, {0x01}, 0x01}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00c2, {0x05}, 0x01}, + {PRO_DMOD, 0x00c6, {0x19}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf02b, {0x00}, 0x01}, + {PRO_DMOD, 0xf064, {0x03}, 0x01}, + {PRO_DMOD, 0xf065, {0xf9}, 0x01}, + {PRO_DMOD, 0xf066, {0x03}, 0x01}, + {PRO_DMOD, 0xf067, {0x01}, 0x01}, + {PRO_DMOD, 0xf06f, {0xe0}, 0x01}, + {PRO_DMOD, 0xf070, {0x03}, 0x01}, + {PRO_DMOD, 0xf072, {0x0f}, 0x01}, + {PRO_DMOD, 0xf073, {0x03}, 0x01}, + {PRO_DMOD, 0xf078, {0x00}, 0x01}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f}, 0x01}, + {PRO_DMOD, 0xf09c, {0x00}, 0x01}, + {PRO_DMOD, 0xf09d, {0x20}, 0x01}, + {PRO_DMOD, 0xf09e, {0x00}, 0x01}, + {PRO_DMOD, 0xf09f, {0x0c}, 0x01}, + {PRO_DMOD, 0xf0a0, {0x00}, 0x01}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00}, 0x01}, + {PRO_DMOD, 0xf14d, {0x00}, 0x01}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00}, 0x01}, + {PRO_DMOD, 0xf15b, {0x08}, 0x01}, + {PRO_DMOD, 0xf15d, {0x03}, 0x01}, + {PRO_DMOD, 0xf15e, {0x05}, 0x01}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01}, 0x01}, + {PRO_DMOD, 0xf167, {0x40}, 0x01}, + {PRO_DMOD, 0xf168, {0x0f}, 0x01}, + {PRO_DMOD, 0xf17a, {0x00}, 0x01}, + {PRO_DMOD, 0xf17b, {0x00}, 0x01}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36}, 0x01}, + {PRO_DMOD, 0xf1bd, {0x00}, 0x01}, + {PRO_DMOD, 0xf1cb, {0xa0}, 0x01}, + {PRO_DMOD, 0xf1cc, {0x01}, 0x01}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf40e, {0x0a}, 0x01}, + {PRO_DMOD, 0xf40f, {0x40}, 0x01}, + {PRO_DMOD, 0xf410, {0x08}, 0x01}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15}, 0x01}, + {PRO_DMOD, 0xf562, {0x20}, 0x01}, + {PRO_DMOD, 0xf5e3, {0x09}, 0x01}, + {PRO_DMOD, 0xf5e4, {0x01}, 0x01}, + {PRO_DMOD, 0xf5e5, {0x01}, 0x01}, + {PRO_DMOD, 0xf600, {0x05}, 0x01}, + {PRO_DMOD, 0xf601, {0x08}, 0x01}, + {PRO_DMOD, 0xf602, {0x0b}, 0x01}, + {PRO_DMOD, 0xf603, {0x0e}, 0x01}, + {PRO_DMOD, 0xf604, {0x11}, 0x01}, + {PRO_DMOD, 0xf605, {0x14}, 0x01}, + {PRO_DMOD, 0xf606, {0x17}, 0x01}, + {PRO_DMOD, 0xf607, {0x1f}, 0x01}, + {PRO_DMOD, 0xf60e, {0x00}, 0x01}, + {PRO_DMOD, 0xf60f, {0x04}, 0x01}, + {PRO_DMOD, 0xf610, {0x32}, 0x01}, + {PRO_DMOD, 0xf611, {0x10}, 0x01}, + {PRO_DMOD, 0xf707, {0xfc}, 0x01}, + {PRO_DMOD, 0xf708, {0x00}, 0x01}, + {PRO_DMOD, 0xf709, {0x37}, 0x01}, + {PRO_DMOD, 0xf70a, {0x00}, 0x01}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40}, 0x01}, + {PRO_DMOD, 0xf810, {0x54}, 0x01}, + {PRO_DMOD, 0xf811, {0x5a}, 0x01}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_60[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x60}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbe, 0xa0, 0xc6, 0xb6, 0x01}, 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x03, 0x02, 0x0a, 0x50, 0x7b, 0x8c, + 0x00, 0x02, 0xbe, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xbe}, 0x01}, + {PRO_DMOD, 0x0124, {0xae}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x56, 0x50, 0x47, 0x42}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x08}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x19, 0x19, 0x8c, 0x8c, 0x8c, + 0x6e, 0x8c, 0x50, 0x8c, 0x8c, 0xac, 0xc6, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xbc}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x94, 0x6e}, 0x02}, + {PRO_DMOD, 0x0185, {0x24}, 0x01}, + {PRO_DMOD, 0x0187, {0x00, 0x00, 0xbe, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, {0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17 + , 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_61[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x61}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x06}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x90, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, {0x0a, 0x33, 0xbc, 0x9c, 0xcc, 0xa8, 0x01}, 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5c, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0xa0, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x03, 0x03, 0x02, 0x08, 0x50, 0x7b, 0x8c, + 0x01, 0x02, 0xc8, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xc6}, 0x01}, + {PRO_DMOD, 0x0124, {0xa8}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x59, 0x50, 0x47, 0x42}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x05}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x59, 0x59, 0x8c, 0x8c, 0x8c, + 0x7b, 0x8c, 0x50, 0x8c, 0x8c, 0xa8, 0xc6, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xcc}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x9c, 0x76}, 0x02}, + {PRO_DMOD, 0x0185, {0x28}, 0x01}, + {PRO_DMOD, 0x0187, {0x01, 0x00, 0xaa, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ +}; + +static struct it913xset it9135_62[] = { + {PRO_DMOD, 0x0043, {0x00}, 0x01}, + {PRO_DMOD, 0x0046, {0x62}, 0x01}, + {PRO_DMOD, 0x0051, {0x01}, 0x01}, + {PRO_DMOD, 0x005f, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0x0068, {0x0a}, 0x01}, + {PRO_DMOD, 0x006a, {0x03}, 0x01}, + {PRO_DMOD, 0x0070, {0x0a, 0x05, 0x02}, 0x03}, + {PRO_DMOD, 0x0075, {0x8c, 0x8c, 0x8c, 0x8c, 0x01}, 0x05}, + {PRO_DMOD, 0x007e, {0x04}, 0x01}, + {PRO_DMOD, 0x0081, {0x0a, 0x12}, 0x02}, + {PRO_DMOD, 0x0084, { 0x0a, 0x33, 0xb8, 0x9c, 0xb2, 0xa6, 0x01}, + 0x07}, + {PRO_DMOD, 0x008e, {0x01}, 0x01}, + {PRO_DMOD, 0x0092, {0x06, 0x00, 0x00, 0x00, 0x00}, 0x05}, + {PRO_DMOD, 0x0099, {0x01}, 0x01}, + {PRO_DMOD, 0x009b, {0x3c, 0x28}, 0x02}, + {PRO_DMOD, 0x009f, {0xe1, 0xcf}, 0x02}, + {PRO_DMOD, 0x00a3, {0x01, 0x5a, 0x01, 0x01}, 0x04}, + {PRO_DMOD, 0x00a9, {0x00, 0x01}, 0x02}, + {PRO_DMOD, 0x00b0, {0x01}, 0x01}, + {PRO_DMOD, 0x00b3, {0x02, 0x3a}, 0x02}, + {PRO_DMOD, 0x00b6, {0x14}, 0x01}, + {PRO_DMOD, 0x00c0, {0x11, 0x00, 0x05, 0x01, 0x00}, 0x05}, + {PRO_DMOD, 0x00c6, {0x19, 0x00}, 0x02}, + {PRO_DMOD, 0x00cb, {0x32, 0x2c, 0x4f, 0x30}, 0x04}, + {PRO_DMOD, 0x00f3, {0x05, 0x8c, 0x8c}, 0x03}, + {PRO_DMOD, 0x00f8, {0x03, 0x06, 0x06}, 0x03}, + {PRO_DMOD, 0x00fc, { 0x02, 0x03, 0x02, 0x09, 0x50, 0x6e, 0x8c, + 0x02, 0x02, 0xc2, 0x00}, 0x0b}, + {PRO_DMOD, 0x0109, {0x02}, 0x01}, + {PRO_DMOD, 0x0115, {0x0a, 0x03}, 0x02}, + {PRO_DMOD, 0x011a, {0xb8}, 0x01}, + {PRO_DMOD, 0x0124, {0xa8}, 0x01}, + {PRO_DMOD, 0x0127, {0x00}, 0x01}, + {PRO_DMOD, 0x012a, {0x53, 0x51, 0x4e, 0x43}, 0x04}, + {PRO_DMOD, 0x0137, {0x00}, 0x01}, + {PRO_DMOD, 0x013b, {0x05}, 0x01}, + {PRO_DMOD, 0x013f, {0x5b}, 0x01}, + {PRO_DMOD, 0x0141, { 0x59, 0xf9, 0x59, 0x19, 0x8c, 0x8c, 0x8c, + 0x7b, 0x8c, 0x50, 0x70, 0x8c, 0x96, 0xd0, + 0x33}, 0x0f}, + {PRO_DMOD, 0x0151, {0x28}, 0x01}, + {PRO_DMOD, 0x0153, {0xb2}, 0x01}, + {PRO_DMOD, 0x0178, {0x09}, 0x01}, + {PRO_DMOD, 0x0181, {0x9c, 0x6e}, 0x02}, + {PRO_DMOD, 0x0185, {0x24}, 0x01}, + {PRO_DMOD, 0x0187, {0x00, 0x00, 0xb8, 0x02, 0x80}, 0x05}, + {PRO_DMOD, 0xed02, {0xff}, 0x01}, + {PRO_DMOD, 0xee42, {0xff}, 0x01}, + {PRO_DMOD, 0xee82, {0xff}, 0x01}, + {PRO_DMOD, 0xf000, {0x0f}, 0x01}, + {PRO_DMOD, 0xf01f, {0x8c, 0x00}, 0x02}, + {PRO_DMOD, 0xf029, {0x8c, 0x00, 0x00}, 0x03}, + {PRO_DMOD, 0xf064, {0x03, 0xf9, 0x03, 0x01}, 0x04}, + {PRO_DMOD, 0xf06f, {0xe0, 0x03}, 0x02}, + {PRO_DMOD, 0xf072, {0x0f, 0x03}, 0x02}, + {PRO_DMOD, 0xf077, {0x01, 0x00}, 0x02}, + {PRO_DMOD, 0xf087, {0x00}, 0x01}, + {PRO_DMOD, 0xf09b, {0x3f, 0x00, 0x20, 0x00, 0x0c, 0x00}, 0x06}, + {PRO_DMOD, 0xf130, {0x04}, 0x01}, + {PRO_DMOD, 0xf132, {0x04}, 0x01}, + {PRO_DMOD, 0xf144, {0x1a}, 0x01}, + {PRO_DMOD, 0xf146, {0x00}, 0x01}, + {PRO_DMOD, 0xf14a, {0x01}, 0x01}, + {PRO_DMOD, 0xf14c, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf14f, {0x04}, 0x01}, + {PRO_DMOD, 0xf158, {0x7f}, 0x01}, + {PRO_DMOD, 0xf15a, {0x00, 0x08}, 0x02}, + {PRO_DMOD, 0xf15d, {0x03, 0x05}, 0x02}, + {PRO_DMOD, 0xf163, {0x05}, 0x01}, + {PRO_DMOD, 0xf166, {0x01, 0x40, 0x0f}, 0x03}, + {PRO_DMOD, 0xf17a, {0x00, 0x00}, 0x02}, + {PRO_DMOD, 0xf183, {0x01}, 0x01}, + {PRO_DMOD, 0xf19d, {0x40}, 0x01}, + {PRO_DMOD, 0xf1bc, {0x36, 0x00}, 0x02}, + {PRO_DMOD, 0xf1cb, {0xa0, 0x01}, 0x02}, + {PRO_DMOD, 0xf204, {0x10}, 0x01}, + {PRO_DMOD, 0xf214, {0x00}, 0x01}, + {PRO_DMOD, 0xf24c, {0x88, 0x95, 0x9a, 0x90}, 0x04}, + {PRO_DMOD, 0xf25a, {0x07, 0xe8, 0x03, 0xb0, 0x04}, 0x05}, + {PRO_DMOD, 0xf270, {0x01, 0x02, 0x01, 0x02}, 0x04}, + {PRO_DMOD, 0xf40e, {0x0a, 0x40, 0x08}, 0x03}, + {PRO_DMOD, 0xf55f, {0x0a}, 0x01}, + {PRO_DMOD, 0xf561, {0x15, 0x20}, 0x02}, + {PRO_DMOD, 0xf5e3, {0x09, 0x01, 0x01}, 0x03}, + {PRO_DMOD, 0xf600, { 0x05, 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, + 0x1f}, 0x08}, + {PRO_DMOD, 0xf60e, {0x00, 0x04, 0x32, 0x10}, 0x04}, + {PRO_DMOD, 0xf707, {0xfc, 0x00, 0x37, 0x00}, 0x04}, + {PRO_DMOD, 0xf78b, {0x01}, 0x01}, + {PRO_DMOD, 0xf80f, {0x40, 0x54, 0x5a}, 0x03}, + {PRO_DMOD, 0xf905, {0x01}, 0x01}, + {PRO_DMOD, 0xfb06, {0x03}, 0x01}, + {PRO_DMOD, 0xfd8b, {0x00}, 0x01}, + {0xff, 0x0000, {0x00}, 0x00} /* Terminating Entry */ }; +/* Tuner setting scripts (still keeping it9137) */ static struct it913xset it9137_tuner_off[] = { {PRO_DMOD, 0xfba8, {0x01}, 0x01}, /* Tuner Clock Off */ {PRO_DMOD, 0xec40, {0x00}, 0x01}, /* Power Down Tuner */ diff --git a/drivers/media/dvb/frontends/it913x-fe.c b/drivers/media/dvb/frontends/it913x-fe.c index d4bd24e..07c1b46 100644 --- a/drivers/media/dvb/frontends/it913x-fe.c +++ b/drivers/media/dvb/frontends/it913x-fe.c @@ -50,9 +50,11 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))."); struct it913x_fe_state { struct dvb_frontend frontend; struct i2c_adapter *i2c_adap; + struct ite_config *config; u8 i2c_addr; u32 frequency; - u8 adf; + fe_modulation_t constellation; + fe_transmit_mode_t transmission_mode; u32 crystalFrequency; u32 adcFrequency; u8 tuner_type; @@ -211,13 +213,17 @@ static int it913x_init_tuner(struct it913x_fe_state *state) state->tun_fn_min /= (state->tun_fdiv * nv_val); deb_info("Tuner fn_min %d", state->tun_fn_min); - for (i = 0; i < 50; i++) { - reg = it913x_read_reg_u8(state, 0xec82); - if (reg > 0) - break; - if (reg < 0) - return -ENODEV; - udelay(2000); + if (state->config->chip_ver > 1) + msleep(50); + else { + for (i = 0; i < 50; i++) { + reg = it913x_read_reg_u8(state, 0xec82); + if (reg > 0) + break; + if (reg < 0) + return -ENODEV; + udelay(2000); + } } return it913x_write_reg(state, PRO_DMOD, 0xed81, val); @@ -492,14 +498,50 @@ static int it913x_fe_read_signal_strength(struct dvb_frontend *fe, return 0; } -static int it913x_fe_read_snr(struct dvb_frontend *fe, u16* snr) +static int it913x_fe_read_snr(struct dvb_frontend *fe, u16 *snr) { struct it913x_fe_state *state = fe->demodulator_priv; - int ret = it913x_read_reg_u8(state, SIGNAL_QUALITY); - ret = (ret * 0xff) / 0x64; - ret |= (ret << 0x8); - *snr = ~ret; - return 0; + int ret; + u8 reg[3]; + u32 snr_val, snr_min, snr_max; + u32 temp; + + ret = it913x_read_reg(state, 0x2c, reg, sizeof(reg)); + + snr_val = (u32)(reg[2] << 16) | (reg[1] < 8) | reg[0]; + + ret |= it913x_read_reg(state, 0xf78b, reg, 1); + if (reg[0]) + snr_val /= reg[0]; + + if (state->transmission_mode == TRANSMISSION_MODE_2K) + snr_val *= 4; + else if (state->transmission_mode == TRANSMISSION_MODE_4K) + snr_val *= 2; + + if (state->constellation == QPSK) { + snr_min = 0xb4711; + snr_max = 0x191451; + } else if (state->constellation == QAM_16) { + snr_min = 0x4f0d5; + snr_max = 0xc7925; + } else if (state->constellation == QAM_64) { + snr_min = 0x256d0; + snr_max = 0x626be; + } else + return -EINVAL; + + if (snr_val < snr_min) + *snr = 0; + else if (snr_val < snr_max) { + temp = (snr_val - snr_min) >> 5; + temp *= 0xffff; + temp /= (snr_max - snr_min) >> 5; + *snr = (u16)temp; + } else + *snr = 0xffff; + + return (ret < 0) ? -ENODEV : 0; } static int it913x_fe_read_ber(struct dvb_frontend *fe, u32 *ber) @@ -526,9 +568,13 @@ static int it913x_fe_get_frontend(struct dvb_frontend *fe, if (reg[3] < 3) p->u.ofdm.constellation = fe_con[reg[3]]; + state->constellation = p->u.ofdm.constellation; + if (reg[0] < 3) p->u.ofdm.transmission_mode = fe_mode[reg[0]]; + state->transmission_mode = p->u.ofdm.transmission_mode; + if (reg[1] < 4) p->u.ofdm.guard_interval = fe_gi[reg[1]]; @@ -578,7 +624,12 @@ static int it913x_fe_set_frontend(struct dvb_frontend *fe, deb_info("Frontend Set Tuner Type %02x", state->tuner_type); switch (state->tuner_type) { - case IT9137: /* Tuner type 0x38 */ + case IT9135_38: + case IT9135_51: + case IT9135_52: + case IT9135_60: + case IT9135_61: + case IT9135_62: ret = it9137_set_tuner(state, p->u.ofdm.bandwidth, p->frequency); break; @@ -678,16 +729,17 @@ static u32 compute_div(u32 a, u32 b, u32 x) static int it913x_fe_start(struct it913x_fe_state *state) { - struct it913xset *set_fe; + struct it913xset *set_lna; struct it913xset *set_mode; int ret; - u8 adf = (state->adf & 0xf); + u8 adf = (state->config->adf & 0xf); u32 adc, xtal; u8 b[4]; - ret = it913x_init_tuner(state); + if (state->config->chip_ver == 1) + ret = it913x_init_tuner(state); - if (adf < 12) { + if (adf < 10) { state->crystalFrequency = fe_clockTable[adf].xtal ; state->table = fe_clockTable[adf].table; state->adcFrequency = state->table->adcFrequency; @@ -720,23 +772,57 @@ static int it913x_fe_start(struct it913x_fe_state *state) b[1] = (adc >> 8) & 0xff; b[2] = (adc >> 16) & 0xff; ret |= it913x_write(state, PRO_DMOD, ADC_FREQ, b, 3); + if (ret < 0) + return -ENODEV; + + /* v1 or v2 tuner script */ + if (state->config->chip_ver > 1) + ret = it913x_fe_script_loader(state, it9135_v2); + else + ret = it913x_fe_script_loader(state, it9135_v1); + if (ret < 0) + return ret; + /* LNA Scripts */ switch (state->tuner_type) { - case IT9137: /* Tuner type 0x38 */ - set_fe = it9137_set; + case IT9135_51: + set_lna = it9135_51; break; + case IT9135_52: + set_lna = it9135_52; + break; + case IT9135_60: + set_lna = it9135_60; + break; + case IT9135_61: + set_lna = it9135_61; + break; + case IT9135_62: + set_lna = it9135_62; + break; + case IT9135_38: default: - return -EINVAL; + set_lna = it9135_38; } + ret = it913x_fe_script_loader(state, set_lna); + if (ret < 0) + return ret; + + if (state->config->chip_ver == 2) { + ret = it913x_write_reg(state, PRO_DMOD, TRIGGER_OFSM, 0x1); + ret |= it913x_write_reg(state, PRO_LINK, PADODPU, 0x0); + ret |= it913x_write_reg(state, PRO_LINK, AGC_O_D, 0x0); + ret |= it913x_init_tuner(state); + } + if (ret < 0) + return -ENODEV; - /* set the demod */ - ret = it913x_fe_script_loader(state, set_fe); /* Always solo frontend */ set_mode = set_solo_fe; ret |= it913x_fe_script_loader(state, set_mode); ret |= it913x_fe_suspend(state); - return 0; + return (ret < 0) ? -ENODEV : 0; } static int it913x_fe_init(struct dvb_frontend *fe) @@ -750,13 +836,7 @@ static int it913x_fe_init(struct dvb_frontend *fe) ret |= it913x_fe_script_loader(state, init_1); - switch (state->tuner_type) { - case IT9137: - ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0); - break; - default: - return -EINVAL; - } + ret |= it913x_write_reg(state, PRO_DMOD, 0xfba8, 0x0); return (ret < 0) ? -ENODEV : 0; } @@ -770,19 +850,34 @@ static void it913x_fe_release(struct dvb_frontend *fe) static struct dvb_frontend_ops it913x_fe_ofdm_ops; struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap, - u8 i2c_addr, u8 adf, u8 type) + u8 i2c_addr, struct ite_config *config) { struct it913x_fe_state *state = NULL; int ret; + /* allocate memory for the internal state */ state = kzalloc(sizeof(struct it913x_fe_state), GFP_KERNEL); if (state == NULL) + return NULL; + if (config == NULL) goto error; state->i2c_adap = i2c_adap; state->i2c_addr = i2c_addr; - state->adf = adf; - state->tuner_type = type; + state->config = config; + + switch (state->config->tuner_id_0) { + case IT9135_51: + case IT9135_52: + case IT9135_60: + case IT9135_61: + case IT9135_62: + state->tuner_type = state->config->tuner_id_0; + break; + default: + case IT9135_38: + state->tuner_type = IT9135_38; + } ret = it913x_fe_start(state); if (ret < 0) @@ -835,5 +930,5 @@ static struct dvb_frontend_ops it913x_fe_ofdm_ops = { MODULE_DESCRIPTION("it913x Frontend and it9137 tuner"); MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com"); -MODULE_VERSION("1.07"); +MODULE_VERSION("1.10"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/it913x-fe.h b/drivers/media/dvb/frontends/it913x-fe.h index 9d97f32..43f879a 100644 --- a/drivers/media/dvb/frontends/it913x-fe.h +++ b/drivers/media/dvb/frontends/it913x-fe.h @@ -23,13 +23,25 @@ #include <linux/dvb/frontend.h> #include "dvb_frontend.h" + +struct ite_config { + u8 chip_ver; + u16 chip_type; + u32 firmware; + u8 tuner_id_0; + u8 tuner_id_1; + u8 dual_mode; + u8 adf; +}; + #if defined(CONFIG_DVB_IT913X_FE) || (defined(CONFIG_DVB_IT913X_FE_MODULE) && \ defined(MODULE)) extern struct dvb_frontend *it913x_fe_attach(struct i2c_adapter *i2c_adap, - u8 i2c_addr, u8 adf, u8 type); + u8 i2c_addr, struct ite_config *config); #else static inline struct dvb_frontend *it913x_fe_attach( - struct i2c_adapter *i2c_adap, u8 i2c_addr, u8 adf, u8 type) + struct i2c_adapter *i2c_adap, + u8 i2c_addr, struct ite_config *config) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; @@ -144,8 +156,14 @@ static inline struct dvb_frontend *it913x_fe_attach( #define EST_SIGNAL_LEVEL 0x004a #define FREE_BAND 0x004b #define SUSPEND_FLAG 0x004c -/* Build in tuners */ +/* Build in tuner types */ #define IT9137 0x38 +#define IT9135_38 0x38 +#define IT9135_51 0x50 +#define IT9135_52 0x52 +#define IT9135_60 0x60 +#define IT9135_61 0x61 +#define IT9135_62 0x62 enum { CMD_DEMOD_READ = 0, diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 0e2f61a..0d6d5e3 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -879,7 +879,36 @@ static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr) static int s5h1409_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { - return s5h1409_read_snr(fe, signal_strength); + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = s5h1409_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; } static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index d8adf1e..5fca113 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -794,7 +794,36 @@ static int s5h1411_read_snr(struct dvb_frontend *fe, u16 *snr) static int s5h1411_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) { - return s5h1411_read_snr(fe, signal_strength); + /* borrowed from lgdt330x.c + * + * Calculate strength from SNR up to 35dB + * Even though the SNR can go higher than 35dB, + * there is some comfort factor in having a range of + * strong signals that can show at 100% + */ + u16 snr; + u32 tmp; + int ret = s5h1411_read_snr(fe, &snr); + + *signal_strength = 0; + + if (0 == ret) { + /* The following calculation method was chosen + * purely for the sake of code re-use from the + * other demod drivers that use this method */ + + /* Convert from SNR in dB * 10 to 8.24 fixed-point */ + tmp = (snr * ((1 << 24) / 10)); + + /* Convert from 8.24 fixed-point to + * scale the range 0 - 35*2^24 into 0 - 65535*/ + if (tmp >= 8960 * 0x10000) + *signal_strength = 0xffff; + else + *signal_strength = tmp / 8960; + } + + return ret; } static int s5h1411_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c index 1b1bf20..de544f6 100644 --- a/drivers/media/dvb/frontends/tda18271c2dd.c +++ b/drivers/media/dvb/frontends/tda18271c2dd.c @@ -1123,20 +1123,6 @@ static int release(struct dvb_frontend *fe) return 0; } -/* - * As defined on EN 300 429 Annex A and on ITU-T J.83 annex A, the DVB-C - * roll-off factor is 0.15. - * According with the specs, the amount of the needed bandwith is given by: - * Bw = Symbol_rate * (1 + 0.15) - * As such, the maximum symbol rate supported by 6 MHz is - * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds - *NOTE: For ITU-T J.83 Annex C, the roll-off factor is 0.13. So: - * max_symbol_rate = 6 MHz / 1.13 = 5309735 Baud - * That means that an adjustment is needed for Japan, - * but, as currently DRX-K is hardcoded to Annex A, let's stick - * with 0.15 roll-off factor. - */ -#define MAX_SYMBOL_RATE_6MHz 5217391 static int set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) @@ -1144,6 +1130,7 @@ static int set_params(struct dvb_frontend *fe, struct tda_state *state = fe->tuner_priv; int status = 0; int Standard; + u32 bw; state->m_Frequency = params->frequency; @@ -1161,8 +1148,23 @@ static int set_params(struct dvb_frontend *fe, break; } else if (fe->ops.info.type == FE_QAM) { - if (params->u.qam.symbol_rate <= MAX_SYMBOL_RATE_6MHz) + /* + * Using a higher bandwidth at the tuner filter may + * allow inter-carrier interference. + * So, determine the minimal channel spacing, in order + * to better adjust the tuner filter. + * According with ITU-T J.83, the bandwidth is given by: + * bw = Simbol Rate * (1 + roll_off), where the roll_off + * is equal to 0.15 for Annex A, and 0.13 for annex C + */ + if (fe->dtv_property_cache.rolloff == ROLLOFF_13) + bw = (params->u.qam.symbol_rate * 13) / 10; + else + bw = (params->u.qam.symbol_rate * 15) / 10; + if (bw <= 6000000) Standard = HF_DVBC_6MHZ; + else if (bw <= 7000000) + Standard = HF_DVBC_7MHZ; else Standard = HF_DVBC_8MHZ; } else diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index ccd5f0d..e954781 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -11,6 +11,162 @@ menuconfig RADIO_ADAPTERS if RADIO_ADAPTERS && VIDEO_V4L2 +config RADIO_SI470X + bool "Silicon Labs Si470x FM Radio Receiver support" + depends on VIDEO_V4L2 + +source "drivers/media/radio/si470x/Kconfig" + +config USB_MR800 + tristate "AverMedia MR 800 USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called radio-mr800. + +config USB_DSBR + tristate "D-Link/GemTek USB FM radio support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. Note that the audio is not digital, and + you must connect the line out connector to a sound card or a + set of speakers. + + To compile this driver as a module, choose M here: the + module will be called dsbr100. + +config RADIO_MAXIRADIO + tristate "Guillemot MAXI Radio FM 2000 radio" + depends on VIDEO_V4L2 && PCI + ---help--- + Choose Y here if you have this radio card. This card may also be + found as Gemtek PCI FM. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux API. Information on + this API and pointers to "v4l" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called radio-maxiradio. + + +config I2C_SI4713 + tristate "I2C driver for Silicon Labs Si4713 device" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want support to Si4713 I2C device. + This device driver supports only i2c bus. + + To compile this driver as a module, choose M here: the + module will be called si4713. + +config RADIO_SI4713 + tristate "Silicon Labs Si4713 FM Radio Transmitter support" + depends on I2C && VIDEO_V4L2 + select I2C_SI4713 + ---help--- + Say Y here if you want support to Si4713 FM Radio Transmitter. + This device can transmit audio through FM. It can transmit + RDS and RBDS signals as well. This module is the v4l2 radio + interface for the i2c driver of this device. + + To compile this driver as a module, choose M here: the + module will be called radio-si4713. + +config RADIO_TEA5764 + tristate "TEA5764 I2C FM radio support" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the TEA5764 FM chip found in + EZX phones. This FM chip is present in EZX phones from Motorola, + connected to internal pxa I2C bus. + + To compile this driver as a module, choose M here: the + module will be called radio-tea5764. + +config RADIO_TEA5764_XTAL + bool "TEA5764 crystal reference" + depends on RADIO_TEA5764=y + default y + help + Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N + here if TEA5764 reference frequency is connected in FREQIN. + +config RADIO_SAA7706H + tristate "SAA7706H Car Radio DSP" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the SAA7706H Car radio Digital + Signal Processor, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called SAA7706H. + +config RADIO_TEF6862 + tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" + depends on I2C && VIDEO_V4L2 + ---help--- + Say Y here if you want to use the TEF6862 Car Radio Enhanced + Selectivity Tuner, found for instance on the Russellville development + board. On the russellville the device is connected to internal + timberdale I2C bus. + + To compile this driver as a module, choose M here: the + module will be called TEF6862. + +config RADIO_TIMBERDALE + tristate "Enable the Timberdale radio driver" + depends on MFD_TIMBERDALE && VIDEO_V4L2 + depends on I2C # for RADIO_SAA7706H + select RADIO_TEF6862 + select RADIO_SAA7706H + ---help--- + This is a kind of umbrella driver for the Radio Tuner and DSP + found behind the Timberdale FPGA on the Russellville board. + Enabling this driver will automatically select the DSP and tuner. + +config RADIO_WL1273 + tristate "Texas Instruments WL1273 I2C FM Radio" + depends on I2C && VIDEO_V4L2 + select MFD_CORE + select MFD_WL1273_CORE + select FW_LOADER + ---help--- + Choose Y here if you have this FM radio chip. + + In order to control your radio card, you will need to use programs + that are compatible with the Video For Linux 2 API. Information on + this API and pointers to "v4l2" programs may be found at + <file:Documentation/video4linux/API.html>. + + To compile this driver as a module, choose M here: the + module will be called radio-wl1273. + +# TI's ST based wl128x FM radio +source "drivers/media/radio/wl128x/Kconfig" + +# +# ISA drivers configuration +# + +menuconfig V4L_RADIO_ISA_DRIVERS + bool "ISA radio devices" + depends on ISA + default n + ---help--- + Say Y here to enable support for these ISA drivers. + +if V4L_RADIO_ISA_DRIVERS + config RADIO_CADET tristate "ADS Cadet AM/FM Tuner" depends on ISA && VIDEO_V4L2 @@ -151,21 +307,6 @@ config RADIO_GEMTEK_PROBE following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 0x28c. -config RADIO_MAXIRADIO - tristate "Guillemot MAXI Radio FM 2000 radio" - depends on VIDEO_V4L2 && PCI - ---help--- - Choose Y here if you have this radio card. This card may also be - found as Gemtek PCI FM. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux API. Information on - this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called radio-maxiradio. - config RADIO_MIROPCM20 tristate "miroSOUND PCM20 radio" depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND @@ -316,130 +457,6 @@ config RADIO_ZOLTRIX_PORT help Enter the I/O port of your Zoltrix radio card. -config I2C_SI4713 - tristate "I2C driver for Silicon Labs Si4713 device" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want support to Si4713 I2C device. - This device driver supports only i2c bus. - - To compile this driver as a module, choose M here: the - module will be called si4713. - -config RADIO_SI4713 - tristate "Silicon Labs Si4713 FM Radio Transmitter support" - depends on I2C && VIDEO_V4L2 - select I2C_SI4713 - ---help--- - Say Y here if you want support to Si4713 FM Radio Transmitter. - This device can transmit audio through FM. It can transmit - RDS and RBDS signals as well. This module is the v4l2 radio - interface for the i2c driver of this device. - - To compile this driver as a module, choose M here: the - module will be called radio-si4713. - -config USB_DSBR - tristate "D-Link/GemTek USB FM radio support" - depends on USB && VIDEO_V4L2 - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called dsbr100. - -config RADIO_SI470X - bool "Silicon Labs Si470x FM Radio Receiver support" - depends on VIDEO_V4L2 - -source "drivers/media/radio/si470x/Kconfig" - -config USB_MR800 - tristate "AverMedia MR 800 USB FM radio support" - depends on USB && VIDEO_V4L2 - ---help--- - Say Y here if you want to connect this type of radio to your - computer's USB port. Note that the audio is not digital, and - you must connect the line out connector to a sound card or a - set of speakers. - - To compile this driver as a module, choose M here: the - module will be called radio-mr800. - -config RADIO_TEA5764 - tristate "TEA5764 I2C FM radio support" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the TEA5764 FM chip found in - EZX phones. This FM chip is present in EZX phones from Motorola, - connected to internal pxa I2C bus. - - To compile this driver as a module, choose M here: the - module will be called radio-tea5764. - -config RADIO_TEA5764_XTAL - bool "TEA5764 crystal reference" - depends on RADIO_TEA5764=y - default y - help - Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N - here if TEA5764 reference frequency is connected in FREQIN. - -config RADIO_SAA7706H - tristate "SAA7706H Car Radio DSP" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the SAA7706H Car radio Digital - Signal Processor, found for instance on the Russellville development - board. On the russellville the device is connected to internal - timberdale I2C bus. - - To compile this driver as a module, choose M here: the - module will be called SAA7706H. - -config RADIO_TEF6862 - tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" - depends on I2C && VIDEO_V4L2 - ---help--- - Say Y here if you want to use the TEF6862 Car Radio Enhanced - Selectivity Tuner, found for instance on the Russellville development - board. On the russellville the device is connected to internal - timberdale I2C bus. - - To compile this driver as a module, choose M here: the - module will be called TEF6862. - -config RADIO_TIMBERDALE - tristate "Enable the Timberdale radio driver" - depends on MFD_TIMBERDALE && VIDEO_V4L2 - depends on I2C # for RADIO_SAA7706H - select RADIO_TEF6862 - select RADIO_SAA7706H - ---help--- - This is a kind of umbrella driver for the Radio Tuner and DSP - found behind the Timberdale FPGA on the Russellville board. - Enabling this driver will automatically select the DSP and tuner. - -config RADIO_WL1273 - tristate "Texas Instruments WL1273 I2C FM Radio" - depends on I2C && VIDEO_V4L2 - select MFD_WL1273_CORE - select FW_LOADER - ---help--- - Choose Y here if you have this FM radio chip. - - In order to control your radio card, you will need to use programs - that are compatible with the Video For Linux 2 API. Information on - this API and pointers to "v4l2" programs may be found at - <file:Documentation/video4linux/API.html>. - - To compile this driver as a module, choose M here: the - module will be called radio-wl1273. - -# TI's ST based wl128x FM radio -source "drivers/media/radio/wl128x/Kconfig" +endif # V4L_RADIO_ISA_DRIVERS endif # RADIO_ADAPTERS diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index aeb7f43..4df4aff 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -87,6 +87,16 @@ config IR_RC5_SZ_DECODER uses an IR protocol that is almost standard RC-5, but not quite, as it uses an additional bit). +config IR_SANYO_DECODER + tristate "Enable IR raw decoder for the Sanyo protocol" + depends on RC_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), + and you need software decoding support. + config IR_MCE_KBD_DECODER tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" depends on RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 2156e78..fb3dee2 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o +obj-$(CONFIG_IR_SANYO_DECODER) += ir-sanyo-decoder.o obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c index 17f8db0..3c9431a 100644 --- a/drivers/media/rc/ir-nec-decoder.c +++ b/drivers/media/rc/ir-nec-decoder.c @@ -194,8 +194,8 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev) return 0; } - IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n", - data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + IR_dprintk(1, "NEC decode failed at count %d state %d (%uus %s)\n", + data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse)); data->state = STATE_INACTIVE; return -EINVAL; } diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 2e5cd31..95e6309 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -357,6 +357,7 @@ static void init_decoders(struct work_struct *work) load_rc6_decode(); load_jvc_decode(); load_sony_decode(); + load_sanyo_decode(); load_mce_kbd_decode(); load_lirc_codec(); diff --git a/drivers/media/rc/ir-sanyo-decoder.c b/drivers/media/rc/ir-sanyo-decoder.c new file mode 100644 index 0000000..1646730 --- /dev/null +++ b/drivers/media/rc/ir-sanyo-decoder.c @@ -0,0 +1,204 @@ +/* ir-sanyo-decoder.c - handle SANYO IR Pulse/Space protocol + * + * Copyright (C) 2011 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This protocol uses the NEC protocol timings. However, data is formatted as: + * 13 bits Custom Code + * 13 bits NOT(Custom Code) + * 8 bits Key data + * 8 bits NOT(Key data) + * + * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon + * Information for this protocol is available at the Sanyo LC7461 datasheet. + */ + +#include <linux/bitrev.h> +#include "rc-core-priv.h" + +#define SANYO_NBITS (13+13+8+8) +#define SANYO_UNIT 562500 /* ns */ +#define SANYO_HEADER_PULSE (16 * SANYO_UNIT) +#define SANYO_HEADER_SPACE (8 * SANYO_UNIT) +#define SANYO_BIT_PULSE (1 * SANYO_UNIT) +#define SANYO_BIT_0_SPACE (1 * SANYO_UNIT) +#define SANYO_BIT_1_SPACE (3 * SANYO_UNIT) +#define SANYO_REPEAT_SPACE (150 * SANYO_UNIT) +#define SANYO_TRAILER_PULSE (1 * SANYO_UNIT) +#define SANYO_TRAILER_SPACE (10 * SANYO_UNIT) /* in fact, 42 */ + +enum sanyo_state { + STATE_INACTIVE, + STATE_HEADER_SPACE, + STATE_BIT_PULSE, + STATE_BIT_SPACE, + STATE_TRAILER_PULSE, + STATE_TRAILER_SPACE, +}; + +/** + * ir_sanyo_decode() - Decode one SANYO pulse or space + * @dev: the struct rc_dev descriptor of the device + * @duration: the struct ir_raw_event descriptor of the pulse/space + * + * This function returns -EINVAL if the pulse violates the state machine + */ +static int ir_sanyo_decode(struct rc_dev *dev, struct ir_raw_event ev) +{ + struct sanyo_dec *data = &dev->raw->sanyo; + u32 scancode; + u8 address, not_address, command, not_command; + + if (!(dev->raw->enabled_protocols & RC_TYPE_SANYO)) + return 0; + + if (!is_timing_event(ev)) { + if (ev.reset) { + IR_dprintk(1, "SANYO event reset received. reset to state 0\n"); + data->state = STATE_INACTIVE; + } + return 0; + } + + IR_dprintk(2, "SANYO decode started at state %d (%uus %s)\n", + data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + + switch (data->state) { + + case STATE_INACTIVE: + if (!ev.pulse) + break; + + if (eq_margin(ev.duration, SANYO_HEADER_PULSE, SANYO_UNIT / 2)) { + data->count = 0; + data->state = STATE_HEADER_SPACE; + return 0; + } + break; + + + case STATE_HEADER_SPACE: + if (ev.pulse) + break; + + if (eq_margin(ev.duration, SANYO_HEADER_SPACE, SANYO_UNIT / 2)) { + data->state = STATE_BIT_PULSE; + return 0; + } + + break; + + case STATE_BIT_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, SANYO_BIT_PULSE, SANYO_UNIT / 2)) + break; + + data->state = STATE_BIT_SPACE; + return 0; + + case STATE_BIT_SPACE: + if (ev.pulse) + break; + + if (!data->count && geq_margin(ev.duration, SANYO_REPEAT_SPACE, SANYO_UNIT / 2)) { + if (!dev->keypressed) { + IR_dprintk(1, "SANYO discarding last key repeat: event after key up\n"); + } else { + rc_repeat(dev); + IR_dprintk(1, "SANYO repeat last key\n"); + data->state = STATE_INACTIVE; + } + return 0; + } + + data->bits <<= 1; + if (eq_margin(ev.duration, SANYO_BIT_1_SPACE, SANYO_UNIT / 2)) + data->bits |= 1; + else if (!eq_margin(ev.duration, SANYO_BIT_0_SPACE, SANYO_UNIT / 2)) + break; + data->count++; + + if (data->count == SANYO_NBITS) + data->state = STATE_TRAILER_PULSE; + else + data->state = STATE_BIT_PULSE; + + return 0; + + case STATE_TRAILER_PULSE: + if (!ev.pulse) + break; + + if (!eq_margin(ev.duration, SANYO_TRAILER_PULSE, SANYO_UNIT / 2)) + break; + + data->state = STATE_TRAILER_SPACE; + return 0; + + case STATE_TRAILER_SPACE: + if (ev.pulse) + break; + + if (!geq_margin(ev.duration, SANYO_TRAILER_SPACE, SANYO_UNIT / 2)) + break; + + address = bitrev16((data->bits >> 29) & 0x1fff) >> 3; + not_address = bitrev16((data->bits >> 16) & 0x1fff) >> 3; + command = bitrev8((data->bits >> 8) & 0xff); + not_command = bitrev8((data->bits >> 0) & 0xff); + + if ((command ^ not_command) != 0xff) { + IR_dprintk(1, "SANYO checksum error: received 0x%08Lx\n", + data->bits); + data->state = STATE_INACTIVE; + return 0; + } + + scancode = address << 8 | command; + IR_dprintk(1, "SANYO scancode: 0x%06x\n", scancode); + rc_keydown(dev, scancode, 0); + data->state = STATE_INACTIVE; + return 0; + } + + IR_dprintk(1, "SANYO decode failed at count %d state %d (%uus %s)\n", + data->count, data->state, TO_US(ev.duration), TO_STR(ev.pulse)); + data->state = STATE_INACTIVE; + return -EINVAL; +} + +static struct ir_raw_handler sanyo_handler = { + .protocols = RC_TYPE_SANYO, + .decode = ir_sanyo_decode, +}; + +static int __init ir_sanyo_decode_init(void) +{ + ir_raw_handler_register(&sanyo_handler); + + printk(KERN_INFO "IR SANYO protocol handler initialized\n"); + return 0; +} + +static void __exit ir_sanyo_decode_exit(void) +{ + ir_raw_handler_unregister(&sanyo_handler); +} + +module_init(ir_sanyo_decode_init); +module_exit(ir_sanyo_decode_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)"); +MODULE_DESCRIPTION("SANYO IR protocol decoder"); diff --git a/drivers/media/rc/keymaps/rc-hauppauge.c b/drivers/media/rc/keymaps/rc-hauppauge.c index e51c616..929bbbc1 100644 --- a/drivers/media/rc/keymaps/rc-hauppauge.c +++ b/drivers/media/rc/keymaps/rc-hauppauge.c @@ -183,6 +183,57 @@ static struct rc_map_table rc5_hauppauge_new[] = { { 0x1d3f, KEY_HOME }, /* + * Keycodes for PT# R-005 remote bundled with Haupauge HVR-930C + * Keycodes start with address = 0x1c + */ + { 0x1c3b, KEY_GOTO }, + { 0x1c3d, KEY_POWER }, + + { 0x1c14, KEY_UP }, + { 0x1c15, KEY_DOWN }, + { 0x1c16, KEY_LEFT }, + { 0x1c17, KEY_RIGHT }, + { 0x1c25, KEY_OK }, + + { 0x1c00, KEY_0 }, + { 0x1c01, KEY_1 }, + { 0x1c02, KEY_2 }, + { 0x1c03, KEY_3 }, + { 0x1c04, KEY_4 }, + { 0x1c05, KEY_5 }, + { 0x1c06, KEY_6 }, + { 0x1c07, KEY_7 }, + { 0x1c08, KEY_8 }, + { 0x1c09, KEY_9 }, + + { 0x1c1f, KEY_EXIT }, /* BACK */ + { 0x1c0d, KEY_MENU }, + { 0x1c1c, KEY_TV }, + + { 0x1c10, KEY_VOLUMEUP }, + { 0x1c11, KEY_VOLUMEDOWN }, + + { 0x1c20, KEY_CHANNELUP }, + { 0x1c21, KEY_CHANNELDOWN }, + + { 0x1c0f, KEY_MUTE }, + { 0x1c12, KEY_PREVIOUS }, /* Prev */ + + { 0x1c36, KEY_STOP }, + { 0x1c37, KEY_RECORD }, + + { 0x1c24, KEY_LAST }, /* <| */ + { 0x1c1e, KEY_NEXT }, /* >| */ + + { 0x1c0a, KEY_TEXT }, + { 0x1c0e, KEY_SUBTITLE }, /* CC */ + + { 0x1c32, KEY_REWIND }, + { 0x1c30, KEY_PAUSE }, + { 0x1c35, KEY_PLAY }, + { 0x1c34, KEY_FASTFORWARD }, + + /* * Keycodes for the old Black Remote Controller * This one also uses RC-5 protocol * Keycodes start with address = 0x00 diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h index c6ca870..b72f858 100644 --- a/drivers/media/rc/rc-core-priv.h +++ b/drivers/media/rc/rc-core-priv.h @@ -84,6 +84,11 @@ struct ir_raw_event_ctrl { unsigned count; unsigned wanted_bits; } rc5_sz; + struct sanyo_dec { + int state; + unsigned count; + u64 bits; + } sanyo; struct mce_kbd_dec { struct input_dev *idev; struct timer_list rx_timeout; @@ -193,6 +198,13 @@ static inline void load_jvc_decode(void) { } static inline void load_sony_decode(void) { } #endif +/* from ir-sanyo-decoder.c */ +#ifdef CONFIG_IR_SANYO_DECODER_MODULE +#define load_sanyo_decode() request_module("ir-sanyo-decoder") +#else +static inline void load_sanyo_decode(void) { } +#endif + /* from ir-mce_kbd-decoder.c */ #ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE #define load_mce_kbd_decode() request_module("ir-mce_kbd-decoder") diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 29f9000..0ea55ea 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -736,6 +736,7 @@ static struct { { RC_TYPE_JVC, "jvc" }, { RC_TYPE_SONY, "sony" }, { RC_TYPE_RC5_SZ, "rc-5-sz" }, + { RC_TYPE_SANYO, "sanyo" }, { RC_TYPE_MCE_KBD, "mce_kbd" }, { RC_TYPE_LIRC, "lirc" }, { RC_TYPE_OTHER, "other" }, diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index b303a3f..4e8a0c4 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -580,25 +580,6 @@ config VIDEO_M52790 endmenu # encoder / decoder chips -config VIDEO_SH_VOU - tristate "SuperH VOU video output driver" - depends on VIDEO_DEV && ARCH_SHMOBILE - select VIDEOBUF_DMA_CONTIG - help - Support for the Video Output Unit (VOU) on SuperH SoCs. - -config VIDEO_VIU - tristate "Freescale VIU Video Driver" - depends on VIDEO_V4L2 && PPC_MPC512x - select VIDEOBUF_DMA_CONTIG - default y - ---help--- - Support for Freescale VIU video driver. This device captures - video data, or overlays video on DIU frame buffer. - - Say Y here if you want to enable VIU device on MPC5121e Rev2+. - In doubt, say N. - config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 @@ -613,66 +594,130 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -source "drivers/media/video/davinci/Kconfig" +# +# USB Multimedia device configuration +# -source "drivers/media/video/omap/Kconfig" +menuconfig V4L_USB_DRIVERS + bool "V4L USB devices" + depends on USB + default y -source "drivers/media/video/bt8xx/Kconfig" +if V4L_USB_DRIVERS -config VIDEO_PMS - tristate "Mediavision Pro Movie Studio Video For Linux" - depends on ISA && VIDEO_V4L2 - help - Say Y if you have such a thing. +source "drivers/media/video/uvc/Kconfig" + +source "drivers/media/video/gspca/Kconfig" + +source "drivers/media/video/pvrusb2/Kconfig" + +source "drivers/media/video/hdpvr/Kconfig" + +source "drivers/media/video/em28xx/Kconfig" + +source "drivers/media/video/tlg2300/Kconfig" + +source "drivers/media/video/cx231xx/Kconfig" + +source "drivers/media/video/tm6000/Kconfig" + +source "drivers/media/video/usbvision/Kconfig" + +source "drivers/media/video/et61x251/Kconfig" + +source "drivers/media/video/sn9c102/Kconfig" + +source "drivers/media/video/pwc/Kconfig" + +source "drivers/media/video/cpia2/Kconfig" + +config USB_ZR364XX + tristate "USB ZR364XX Camera support" + depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC + ---help--- + Say Y here if you want to connect this type of camera to your + computer's USB port. + See <file:Documentation/video4linux/zr364xx.txt> for more info + and list of supported cameras. To compile this driver as a module, choose M here: the - module will be called pms. + module will be called zr364xx. -config VIDEO_BWQCAM - tristate "Quickcam BW Video For Linux" - depends on PARPORT && VIDEO_V4L2 - help - Say Y have if you the black and white version of the QuickCam - camera. See the next option for the color version. +config USB_STKWEBCAM + tristate "USB Syntek DC1125 Camera support" + depends on VIDEO_V4L2 && EXPERIMENTAL + ---help--- + Say Y here if you want to use this type of camera. + Supported devices are typically found in some Asus laptops, + with USB id 174f:a311 and 05e1:0501. Other Syntek cameras + may be supported by the stk11xx driver, from which this is + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the - module will be called bw-qcam. + module will be called stkwebcam. -config VIDEO_CQCAM - tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" - depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2 +config USB_S2255 + tristate "USB Sensoray 2255 video capture device" + depends on VIDEO_V4L2 + select VIDEOBUF_VMALLOC + default n help - This is the video4linux driver for the colour version of the - Connectix QuickCam. If you have one of these cameras, say Y here, - otherwise say N. This driver does not work with the original - monochrome QuickCam, QuickCam VC or QuickClip. It is also available - as a module (c-qcam). - Read <file:Documentation/video4linux/CQcam.txt> for more information. + Say Y here if you want support for the Sensoray 2255 USB device. + This driver can be compiled as a module, called s2255drv. -config VIDEO_W9966 - tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" - depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 - help - Video4linux driver for Winbond's w9966 based Webcams. - Currently tested with the LifeView FlyCam Supra. - If you have one of these cameras, say Y here - otherwise say N. - This driver is also available as a module (w9966). +endif # V4L_USB_DRIVERS - Check out <file:Documentation/video4linux/w9966.txt> for more - information. +# +# PCI drivers configuration +# -source "drivers/media/video/cpia2/Kconfig" +menuconfig V4L_PCI_DRIVERS + bool "V4L PCI(e) devices" + depends on PCI + default y + ---help--- + Say Y here to enable support for these PCI(e) drivers. -config VIDEO_VINO - tristate "SGI Vino Video For Linux (EXPERIMENTAL)" - depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2 - select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO - help - Say Y here to build in support for the Vino video input system found - on SGI Indy machines. +if V4L_PCI_DRIVERS -source "drivers/media/video/zoran/Kconfig" +source "drivers/media/video/au0828/Kconfig" + +source "drivers/media/video/bt8xx/Kconfig" + +source "drivers/media/video/cx18/Kconfig" + +source "drivers/media/video/cx23885/Kconfig" + +source "drivers/media/video/cx25821/Kconfig" + +source "drivers/media/video/cx88/Kconfig" + +config VIDEO_HEXIUM_GEMINI + tristate "Hexium Gemini frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium Gemini frame + grabber card by Hexium. Please note that the Gemini Dual + card is *not* fully supported. + + To compile this driver as a module, choose M here: the + module will be called hexium_gemini. + +config VIDEO_HEXIUM_ORION + tristate "Hexium HV-PCI6 and Orion frame grabber" + depends on PCI && VIDEO_V4L2 && I2C + select VIDEO_SAA7146_VV + ---help--- + This is a video4linux driver for the Hexium HV-PCI6 and + Orion frame grabber cards by Hexium. + + To compile this driver as a module, choose M here: the + module will be called hexium_orion. + +source "drivers/media/video/ivtv/Kconfig" config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" @@ -688,8 +733,6 @@ config VIDEO_MEYE To compile this driver as a module, choose M here: the module will be called meye. -source "drivers/media/video/saa7134/Kconfig" - config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" depends on PCI && VIDEO_V4L2 && I2C @@ -706,28 +749,119 @@ config VIDEO_MXB To compile this driver as a module, choose M here: the module will be called mxb. -config VIDEO_HEXIUM_ORION - tristate "Hexium HV-PCI6 and Orion frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV +source "drivers/media/video/saa7134/Kconfig" + +source "drivers/media/video/saa7164/Kconfig" + +source "drivers/media/video/zoran/Kconfig" + +endif # V4L_PCI_DRIVERS + +# +# ISA & parallel port drivers configuration +# + +menuconfig V4L_ISA_PARPORT_DRIVERS + bool "V4L ISA and parallel port devices" + depends on ISA || PARPORT + default n ---help--- - This is a video4linux driver for the Hexium HV-PCI6 and - Orion frame grabber cards by Hexium. + Say Y here to enable support for these ISA and parallel port drivers. + +if V4L_ISA_PARPORT_DRIVERS + +config VIDEO_BWQCAM + tristate "Quickcam BW Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + Say Y have if you the black and white version of the QuickCam + camera. See the next option for the color version. To compile this driver as a module, choose M here: the - module will be called hexium_orion. + module will be called bw-qcam. -config VIDEO_HEXIUM_GEMINI - tristate "Hexium Gemini frame grabber" - depends on PCI && VIDEO_V4L2 && I2C - select VIDEO_SAA7146_VV - ---help--- - This is a video4linux driver for the Hexium Gemini frame - grabber card by Hexium. Please note that the Gemini Dual - card is *not* fully supported. +config VIDEO_CQCAM + tristate "QuickCam Colour Video For Linux" + depends on PARPORT && VIDEO_V4L2 + help + This is the video4linux driver for the colour version of the + Connectix QuickCam. If you have one of these cameras, say Y here, + otherwise say N. This driver does not work with the original + monochrome QuickCam, QuickCam VC or QuickClip. It is also available + as a module (c-qcam). + Read <file:Documentation/video4linux/CQcam.txt> for more information. + +config VIDEO_PMS + tristate "Mediavision Pro Movie Studio Video For Linux" + depends on ISA && VIDEO_V4L2 + help + Say Y if you have the ISA Mediavision Pro Movie Studio + capture card. To compile this driver as a module, choose M here: the - module will be called hexium_gemini. + module will be called pms. + +config VIDEO_W9966 + tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" + depends on PARPORT_1284 && PARPORT && VIDEO_V4L2 + help + Video4linux driver for Winbond's w9966 based Webcams. + Currently tested with the LifeView FlyCam Supra. + If you have one of these cameras, say Y here + otherwise say N. + This driver is also available as a module (w9966). + + Check out <file:Documentation/video4linux/w9966.txt> for more + information. + +endif # V4L_ISA_PARPORT_DRIVERS + +menuconfig V4L_PLATFORM_DRIVERS + bool "V4L platform devices" + default n + ---help--- + Say Y here to enable support for platform-specific V4L drivers. + +if V4L_PLATFORM_DRIVERS + +source "drivers/media/video/marvell-ccic/Kconfig" + +config VIDEO_VIA_CAMERA + tristate "VIAFB camera controller support" + depends on FB_VIA + select VIDEOBUF_DMA_SG + select VIDEO_OV7670 + help + Driver support for the integrated camera controller in VIA + Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems + with ov7670 sensors. + +# +# Platform multimedia device configuration +# + +source "drivers/media/video/davinci/Kconfig" + +source "drivers/media/video/omap/Kconfig" + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on VIDEO_DEV && ARCH_SHMOBILE + select VIDEOBUF_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +config VIDEO_VIU + tristate "Freescale VIU Video Driver" + depends on VIDEO_V4L2 && PPC_MPC512x + select VIDEOBUF_DMA_CONTIG + default y + ---help--- + Support for Freescale VIU video driver. This device captures + video data, or overlays video on DIU frame buffer. + + Say Y here if you want to enable VIU device on MPC5121e Rev2+. + In doubt, say N. config VIDEO_TIMBERDALE tristate "Support for timberdale Video In/LogiWIN" @@ -739,21 +873,13 @@ config VIDEO_TIMBERDALE ---help--- Add support for the Video In peripherial of the timberdale FPGA. -source "drivers/media/video/cx88/Kconfig" - -source "drivers/media/video/cx23885/Kconfig" - -source "drivers/media/video/cx25821/Kconfig" - -source "drivers/media/video/au0828/Kconfig" - -source "drivers/media/video/ivtv/Kconfig" - -source "drivers/media/video/cx18/Kconfig" - -source "drivers/media/video/saa7164/Kconfig" - -source "drivers/media/video/marvell-ccic/Kconfig" +config VIDEO_VINO + tristate "SGI Vino Video For Linux" + depends on I2C && SGI_IP22 && VIDEO_V4L2 + select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO + help + Say Y here to build in support for the Vino video input system found + on SGI Indy machines. config VIDEO_M32R_AR tristate "AR devices" @@ -774,16 +900,6 @@ config VIDEO_M32R_AR_M64278 To compile this driver as a module, choose M here: the module will be called arv. -config VIDEO_VIA_CAMERA - tristate "VIAFB camera controller support" - depends on FB_VIA - select VIDEOBUF_DMA_SG - select VIDEO_OV7670 - help - Driver support for the integrated camera controller in VIA - Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems - with ov7670 sensors. - config VIDEO_OMAP3 tristate "OMAP 3 Camera support (EXPERIMENTAL)" depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL @@ -1002,78 +1118,7 @@ config VIDEO_S5P_MIPI_CSIS source "drivers/media/video/s5p-tv/Kconfig" -# -# USB Multimedia device configuration -# - -menuconfig V4L_USB_DRIVERS - bool "V4L USB devices" - depends on USB - default y - -if V4L_USB_DRIVERS && USB - -source "drivers/media/video/uvc/Kconfig" - -source "drivers/media/video/gspca/Kconfig" - -source "drivers/media/video/pvrusb2/Kconfig" - -source "drivers/media/video/hdpvr/Kconfig" - -source "drivers/media/video/em28xx/Kconfig" - -source "drivers/media/video/tlg2300/Kconfig" - -source "drivers/media/video/cx231xx/Kconfig" - -source "drivers/media/video/tm6000/Kconfig" - -source "drivers/media/video/usbvision/Kconfig" - -source "drivers/media/video/et61x251/Kconfig" - -source "drivers/media/video/sn9c102/Kconfig" - -source "drivers/media/video/pwc/Kconfig" - -config USB_ZR364XX - tristate "USB ZR364XX Camera support" - depends on VIDEO_V4L2 - select VIDEOBUF_GEN - select VIDEOBUF_VMALLOC - ---help--- - Say Y here if you want to connect this type of camera to your - computer's USB port. - See <file:Documentation/video4linux/zr364xx.txt> for more info - and list of supported cameras. - - To compile this driver as a module, choose M here: the - module will be called zr364xx. - -config USB_STKWEBCAM - tristate "USB Syntek DC1125 Camera support" - depends on VIDEO_V4L2 && EXPERIMENTAL - ---help--- - Say Y here if you want to use this type of camera. - Supported devices are typically found in some Asus laptops, - with USB id 174f:a311 and 05e1:0501. Other Syntek cameras - may be supported by the stk11xx driver, from which this is - derived, see <http://sourceforge.net/projects/syntekdriver/> - - To compile this driver as a module, choose M here: the - module will be called stkwebcam. - -config USB_S2255 - tristate "USB Sensoray 2255 video capture device" - depends on VIDEO_V4L2 - select VIDEOBUF_VMALLOC - default n - help - Say Y here if you want support for the Sensoray 2255 USB device. - This driver can be compiled as a module, called s2255drv. - -endif # V4L_USB_DRIVERS +endif # V4L_PLATFORM_DRIVERS endif # VIDEO_CAPTURE_DRIVERS menuconfig V4L_MEM2MEM_DRIVERS @@ -1098,6 +1143,15 @@ config VIDEO_MEM2MEM_TESTDEV This is a virtual test device for the memory-to-memory driver framework. +config VIDEO_SAMSUNG_S5P_G2D + tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver" + depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + default n + ---help--- + This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D + 2d graphics accelerator. config VIDEO_SAMSUNG_S5P_MFC tristate "Samsung S5P MFC 5.1 Video Codec" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 117f9c4..ddeaa6c 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -180,6 +180,8 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/ +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d/ + obj-$(CONFIG_ARCH_DAVINCI) += davinci/ obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index 23ba5c3..879f1d8 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -64,6 +64,11 @@ static inline struct adv7170 *to_adv7170(struct v4l2_subdev *sd) static char *inputs[] = { "pass_through", "play_back" }; +static enum v4l2_mbus_pixelcode adv7170_codes[] = { + V4L2_MBUS_FMT_UYVY8_2X8, + V4L2_MBUS_FMT_UYVY8_1X16, +}; + /* ----------------------------------------------------------------------- */ static inline int adv7170_write(struct v4l2_subdev *sd, u8 reg, u8 value) @@ -258,6 +263,60 @@ static int adv7170_s_routing(struct v4l2_subdev *sd, return 0; } +static int adv7170_enum_fmt(struct v4l2_subdev *sd, unsigned int index, + enum v4l2_mbus_pixelcode *code) +{ + if (index >= ARRAY_SIZE(adv7170_codes)) + return -EINVAL; + + *code = adv7170_codes[index]; + return 0; +} + +static int adv7170_g_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + + if ((val & 0x40) == (1 << 6)) + mf->code = V4L2_MBUS_FMT_UYVY8_1X16; + else + mf->code = V4L2_MBUS_FMT_UYVY8_2X8; + + mf->colorspace = V4L2_COLORSPACE_SMPTE170M; + mf->width = 0; + mf->height = 0; + mf->field = V4L2_FIELD_ANY; + + return 0; +} + +static int adv7170_s_fmt(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf) +{ + u8 val = adv7170_read(sd, 0x7); + int ret; + + switch (mf->code) { + case V4L2_MBUS_FMT_UYVY8_2X8: + val &= ~0x40; + break; + + case V4L2_MBUS_FMT_UYVY8_1X16: + val |= 0x40; + break; + + default: + v4l2_dbg(1, debug, sd, + "illegal v4l2_mbus_framefmt code: %d\n", mf->code); + return -EINVAL; + } + + ret = adv7170_write(sd, 0x7, val); + + return ret; +} + static int adv7170_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) { struct i2c_client *client = v4l2_get_subdevdata(sd); @@ -274,6 +333,9 @@ static const struct v4l2_subdev_core_ops adv7170_core_ops = { static const struct v4l2_subdev_video_ops adv7170_video_ops = { .s_std_output = adv7170_s_std_output, .s_routing = adv7170_s_routing, + .s_mbus_fmt = adv7170_s_fmt, + .g_mbus_fmt = adv7170_g_fmt, + .enum_mbus_fmt = adv7170_enum_fmt, }; static const struct v4l2_subdev_ops adv7170_ops = { diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c index 8c775c5..fbc904f 100644 --- a/drivers/media/video/atmel-isi.c +++ b/drivers/media/video/atmel-isi.c @@ -1036,7 +1036,7 @@ err_alloc_ctx: err_alloc_descriptors: kfree(isi); err_alloc_isi: - clk_put(isi->pclk); + clk_put(pclk); return ret; } diff --git a/drivers/media/video/bt8xx/bt848.h b/drivers/media/video/bt8xx/bt848.h index 0bcd953..c37e6ac 100644 --- a/drivers/media/video/bt8xx/bt848.h +++ b/drivers/media/video/bt8xx/bt848.h @@ -30,6 +30,10 @@ #ifndef PCI_DEVICE_ID_BT849 #define PCI_DEVICE_ID_BT849 0x351 #endif +#ifndef PCI_DEVICE_ID_FUSION879 +#define PCI_DEVICE_ID_FUSION879 0x36c +#endif + #ifndef PCI_DEVICE_ID_BT878 #define PCI_DEVICE_ID_BT878 0x36e #endif @@ -37,7 +41,6 @@ #define PCI_DEVICE_ID_BT879 0x36f #endif - /* Brooktree 848 registers */ #define BT848_DSTATUS 0x000 diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 5939021..ff2933a 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -80,6 +80,8 @@ static void phytec_muxsel(struct bttv *btv, unsigned int input); static void gv800s_muxsel(struct bttv *btv, unsigned int input); static void gv800s_init(struct bttv *btv); +static void td3116_muxsel(struct bttv *btv, unsigned int input); + static int terratec_active_radio_upgrade(struct bttv *btv); static int tea5757_read(struct bttv *btv); static int tea5757_write(struct bttv *btv, int value); @@ -284,7 +286,8 @@ static struct CARD { { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, - { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, + { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, + { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, @@ -341,6 +344,7 @@ static struct CARD { { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, + { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, { 0, -1, NULL } }; @@ -1526,10 +1530,10 @@ struct tvcard bttv_tvcards[] = { GPIO20,22,23: R30,R29,R28 */ }, - [BTTV_BOARD_SENSORAY311] = { + [BTTV_BOARD_SENSORAY311_611] = { /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ - /* you must jumper JP5 for the card to work */ - .name = "Sensoray 311", + /* you must jumper JP5 for the 311 card (PC/104+) to work */ + .name = "Sensoray 311/611", .video_inputs = 5, /* .audio_inputs= 0, */ .svhs = 4, @@ -2879,6 +2883,16 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, }, + [BTTV_BOARD_TVT_TD3116] = { + .name = "Tongwei Video Technology TD-3116", + .video_inputs = 16, + .gpiomask = 0xc00ff, + .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), + .muxsel_hook = td3116_muxsel, + .svhs = NO_SVHS, + .pll = PLL_28, + .tuner_type = TUNER_ABSENT, + }, }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); @@ -3228,6 +3242,42 @@ static void geovision_muxsel(struct bttv *btv, unsigned int input) gpio_bits(0xf, inmux); } +/* + * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. + * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. + * The muxes are controlled via a 74HC373 latch which is connected to + * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. + * Q0 of the latch is connected to the Enable (~E) input of the first + * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. + * Q4 - Q7 are connected to the second 74HC4051 in the same way. + */ + +static void td3116_latch_value(struct bttv *btv, u32 value) +{ + gpio_bits((1<<18) | 0xff, value); + gpio_bits((1<<18) | 0xff, (1<<18) | value); + udelay(1); + gpio_bits((1<<18) | 0xff, value); +} + +static void td3116_muxsel(struct bttv *btv, unsigned int input) +{ + u32 value; + u32 highbit; + + highbit = (input & 0x8) >> 3 ; + + /* Disable outputs and set value in the mux */ + value = 0x11; /* Disable outputs */ + value |= ((input & 0x7) << 1) << (4 * highbit); + td3116_latch_value(btv, value); + + /* Enable the correct output */ + value &= ~0x11; + value |= ((highbit ^ 0x1) << 4) | highbit; + td3116_latch_value(btv, value); +} + /* ----------------------------------------------------------------------- */ static void bttv_reset_audio(struct bttv *btv) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3dd0660..76c301f 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4572,6 +4572,7 @@ static struct pci_device_id bttv_pci_tbl[] = { {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0}, {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0}, {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0}, + {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_FUSION879), 0}, {0,} }; diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index c633359..c517161 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -96,7 +96,7 @@ #define BTTV_BOARD_PV_BT878P_PLUS 0x46 #define BTTV_BOARD_FLYVIDEO98EZ 0x47 #define BTTV_BOARD_PV_BT878P_9B 0x48 -#define BTTV_BOARD_SENSORAY311 0x49 +#define BTTV_BOARD_SENSORAY311_611 0x49 #define BTTV_BOARD_RV605 0x4a #define BTTV_BOARD_POWERCLR_MTV878 0x4b #define BTTV_BOARD_WINDVR 0x4c @@ -183,6 +183,7 @@ #define BTTV_BOARD_GEOVISION_GV800S 0x9d #define BTTV_BOARD_GEOVISION_GV800S_SL 0x9e #define BTTV_BOARD_PV183 0x9f +#define BTTV_BOARD_TVT_TD3116 0xa0 /* more card-specific defines */ diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 5c42abd..3598dc0 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -70,11 +70,6 @@ config VIDEO_CX88_DVB To compile this driver as a module, choose M here: the module will be called cx88-dvb. -config VIDEO_CX88_MPEG - tristate - depends on VIDEO_CX88_DVB || VIDEO_CX88_BLACKBIRD - default y - config VIDEO_CX88_VP3054 tristate "VP-3054 Secondary I2C Bus Support" default m @@ -84,3 +79,8 @@ config VIDEO_CX88_VP3054 Conexant 2388x chip and the MT352 demodulator, which also require support for the VP-3054 Secondary I2C bus, such at DNTV Live! DVB-T Pro. + +config VIDEO_CX88_MPEG + tristate + depends on VIDEO_CX88_DVB || VIDEO_CX88_BLACKBIRD + default y diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c index 8588a86..d98da4b 100644 --- a/drivers/media/video/davinci/vpbe_display.c +++ b/drivers/media/video/davinci/vpbe_display.c @@ -1746,15 +1746,16 @@ static __devinit int vpbe_display_probe(struct platform_device *pdev) for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { if (register_device(disp_dev->dev[i], disp_dev, pdev)) { err = -ENODEV; - goto probe_out; + goto probe_out_irq; } } printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n"); return 0; -probe_out: +probe_out_irq: free_irq(res->start, disp_dev); +probe_out: for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { /* Get the pointer to the layer object */ vpbe_display_layer = disp_dev->dev[k]; diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 9b747c2..f63a715 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -336,6 +336,23 @@ static struct em28xx_reg_seq pctv_460e[] = { { -1, -1, -1, -1}, }; +static struct em28xx_reg_seq hauppauge_930c_gpio[] = { + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, /* xc5000 reset */ + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +#if 0 +static struct em28xx_reg_seq hauppauge_930c_digital[] = { + {EM2874_R80_GPIO, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + /* * Board definitions */ @@ -887,11 +904,29 @@ struct em28xx_board em28xx_boards[] = { .tuner_addr = 0x41, .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ .tuner_gpio = terratec_h5_gpio, +#else + .tuner_type = TUNER_ABSENT, #endif .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, + [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { + .name = "Hauppauge WinTV HVR 930C", + .has_dvb = 1, +#if 0 /* FIXME: Add analog support */ + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x41, + .dvb_gpio = hauppauge_930c_digital, + .tuner_gpio = hauppauge_930c_gpio, +#else + .tuner_type = TUNER_ABSENT, +#endif + .ir_codes = RC_MAP_HAUPPAUGE, + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { .name = "Hauppauge WinTV HVR 900", .tda9887_conf = TDA9887_PRESENT, @@ -1914,11 +1949,11 @@ struct usb_device_id em28xx_id_table[] = { { USB_DEVICE(0x0ccd, 0x0042), .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, { USB_DEVICE(0x0ccd, 0x0043), + .driver_info = EM2870_BOARD_TERRATEC_XS }, + { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, - { USB_DEVICE(0x0ccd, 0x10a2), /* Rev. 1 */ + { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ .driver_info = EM2884_BOARD_TERRATEC_H5 }, - { USB_DEVICE(0x0ccd, 0x10ad), /* Rev. 2 */ - .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS }, { USB_DEVICE(0x0ccd, 0x0084), .driver_info = EM2860_BOARD_TERRATEC_AV350 }, { USB_DEVICE(0x0ccd, 0x0096), @@ -1975,6 +2010,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28174_BOARD_PCTV_290E }, { USB_DEVICE(0x2013, 0x024c), .driver_info = EM28174_BOARD_PCTV_460E }, + { USB_DEVICE(0x2040, 0x1605), + .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2028,10 +2065,10 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg) int rc = 0; struct em28xx *dev = ptr; - if (dev->tuner_type != TUNER_XC2028) + if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) return 0; - if (command != XC2028_TUNER_RESET) + if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) return 0; rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index cef7a2d..55a90089 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -316,6 +316,14 @@ struct drxk_config terratec_h5_drxk = { .microcode_name = "dvb-usb-terratec-h5-drxk.fw", }; +struct drxk_config hauppauge_930c_drxk = { + .adr = 0x29, + .single_master = 1, + .no_i2c_bridge = 1, + .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw", + .chunk_size = 56, +}; + static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) { struct em28xx_dvb *dvb = fe->sec_priv; @@ -334,6 +342,73 @@ static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) return status; } +static void hauppauge_hvr930c_init(struct em28xx *dev) +{ + int i; + + struct em28xx_reg_seq hauppauge_hvr930c_init[] = { + {EM2874_R80_GPIO, 0xff, 0xff, 0x65}, + {EM2874_R80_GPIO, 0xfb, 0xff, 0x32}, + {EM2874_R80_GPIO, 0xff, 0xff, 0xb8}, + { -1, -1, -1, -1}, + }; + struct em28xx_reg_seq hauppauge_hvr930c_end[] = { + {EM2874_R80_GPIO, 0xef, 0xff, 0x01}, + {EM2874_R80_GPIO, 0xaf, 0xff, 0x65}, + {EM2874_R80_GPIO, 0xef, 0xff, 0x76}, + {EM2874_R80_GPIO, 0xef, 0xff, 0x01}, + {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b}, + {EM2874_R80_GPIO, 0xef, 0xff, 0x40}, + + {EM2874_R80_GPIO, 0xcf, 0xff, 0x65}, + {EM2874_R80_GPIO, 0xef, 0xff, 0x65}, + {EM2874_R80_GPIO, 0xcf, 0xff, 0x0b}, + {EM2874_R80_GPIO, 0xef, 0xff, 0x65}, + + { -1, -1, -1, -1}, + }; + + struct { + unsigned char r[4]; + int len; + } regs[] = { + {{ 0x06, 0x02, 0x00, 0x31 }, 4}, + {{ 0x01, 0x02 }, 2}, + {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0xff, 0xaf }, 4}, + {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, + {{ 0x01, 0x00 }, 2}, + {{ 0x01, 0x00, 0x73, 0xaf }, 4}, + {{ 0x04, 0x00 }, 2}, + {{ 0x00, 0x04 }, 2}, + {{ 0x00, 0x04, 0x00, 0x0a }, 4}, + {{ 0x04, 0x14 }, 2}, + {{ 0x04, 0x14, 0x00, 0x00 }, 4}, + }; + + em28xx_gpio_set(dev, hauppauge_hvr930c_init); + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); + msleep(10); + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); + msleep(10); + + dev->i2c_client.addr = 0x82 >> 1; + + for (i = 0; i < ARRAY_SIZE(regs); i++) + i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len); + em28xx_gpio_set(dev, hauppauge_hvr930c_end); + + msleep(100); + + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); + msleep(30); + + em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45); + msleep(10); + +} + static void terratec_h5_init(struct em28xx *dev) { int i; @@ -788,6 +863,49 @@ static int em28xx_dvb_init(struct em28xx *dev) mfe_shared = 1; } break; + case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: + hauppauge_hvr930c_init(dev); + + dvb->dont_attach_fe1 = 1; + + dvb->fe[0] = dvb_attach(drxk_attach, + &hauppauge_930c_drxk, &dev->i2c_adap, + &dvb->fe[1]); + if (!dvb->fe[0]) { + result = -EINVAL; + goto out_free; + } + /* FIXME: do we need a pll semaphore? */ + dvb->fe[0]->sec_priv = dvb; + sema_init(&dvb->pll_mutex, 1); + dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl; + dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; + dvb->fe[1]->id = 1; + + /* Attach xc5000 */ + struct xc5000_config cfg; + memset(&cfg, 0, sizeof(cfg)); + cfg.i2c_address = 0x61; + cfg.if_khz = 4000; + + if (dvb->fe[0]->ops.i2c_gate_ctrl) + dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1); + if (!dvb_attach(xc5000_attach, dvb->fe[0], &dev->i2c_adap, + &cfg)) { + result = -EINVAL; + goto out_free; + } + + if (dvb->fe[0]->ops.i2c_gate_ctrl) + dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0); + + /* Hack - needed by drxk/tda18271c2dd */ + dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv; + memcpy(&dvb->fe[1]->ops.tuner_ops, + &dvb->fe[0]->ops.tuner_ops, + sizeof(dvb->fe[0]->ops.tuner_ops)); + + break; case EM2884_BOARD_TERRATEC_H5: terratec_h5_init(dev); @@ -798,7 +916,6 @@ static int em28xx_dvb_init(struct em28xx *dev) result = -EINVAL; goto out_free; } - /* FIXME: do we need a pll semaphore? */ dvb->fe[0]->sec_priv = dvb; sema_init(&dvb->pll_mutex, 1); @@ -845,6 +962,8 @@ static int em28xx_dvb_init(struct em28xx *dev) } /* define general-purpose callback pointer */ dvb->fe[0]->callback = em28xx_tuner_callback; + if (dvb->fe[1]) + dvb->fe[1]->callback = em28xx_tuner_callback; /* register everything */ result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev); diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index 679da48..2630b26 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -306,7 +306,8 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir) poll_result.rc_data[0], poll_result.toggle_bit); - if (ir->dev->chip_id == CHIP_ID_EM2874) + if (ir->dev->chip_id == CHIP_ID_EM2874 || + ir->dev->chip_id == CHIP_ID_EM2884) /* The em2874 clears the readcount field every time the register is read. The em2860/2880 datasheet says that it is supposed to clear the readcount, but it doesn't. So with @@ -371,13 +372,15 @@ int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type) case CHIP_ID_EM2883: ir->get_key = default_polling_getkey; break; + case CHIP_ID_EM2884: case CHIP_ID_EM2874: case CHIP_ID_EM28174: ir->get_key = em2874_polling_getkey; em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1); break; default: - printk("Unrecognized em28xx chip id: IR not supported\n"); + printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n", + dev->chip_id); rc = -EINVAL; } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 2a2cb7e..c16ae8f 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -38,6 +38,7 @@ #include <media/videobuf-dvb.h> #endif #include "tuner-xc2028.h" +#include "xc5000.h" #include "em28xx-reg.h" /* Boards supported by driver */ @@ -121,6 +122,7 @@ #define EM28174_BOARD_PCTV_290E 78 #define EM2884_BOARD_TERRATEC_H5 79 #define EM28174_BOARD_PCTV_460E 80 +#define EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C 81 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4 diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c index e2b1029..097c9d3 100644 --- a/drivers/media/video/mt9m001.c +++ b/drivers/media/video/mt9m001.c @@ -109,14 +109,13 @@ static struct mt9m001 *to_mt9m001(const struct i2c_client *client) static int reg_read(struct i2c_client *client, const u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); - return data < 0 ? data : swab16(data); + return i2c_smbus_read_word_swapped(client, reg); } static int reg_write(struct i2c_client *client, const u8 reg, const u16 data) { - return i2c_smbus_write_word_data(client, reg, swab16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int reg_set(struct i2c_client *client, const u8 reg, diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index cf2c0fb..258adfd 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -211,7 +211,7 @@ static int reg_page_map_set(struct i2c_client *client, const u16 reg) if (page > 2) return -EINVAL; - ret = i2c_smbus_write_word_data(client, MT9M111_PAGE_MAP, swab16(page)); + ret = i2c_smbus_write_word_swapped(client, MT9M111_PAGE_MAP, page); if (!ret) mt9m111->lastpage = page; return ret; @@ -223,7 +223,7 @@ static int mt9m111_reg_read(struct i2c_client *client, const u16 reg) ret = reg_page_map_set(client, reg); if (!ret) - ret = swab16(i2c_smbus_read_word_data(client, reg & 0xff)); + ret = i2c_smbus_read_word_swapped(client, reg & 0xff); dev_dbg(&client->dev, "read reg.%03x -> %04x\n", reg, ret); return ret; @@ -236,8 +236,7 @@ static int mt9m111_reg_write(struct i2c_client *client, const u16 reg, ret = reg_page_map_set(client, reg); if (!ret) - ret = i2c_smbus_write_word_data(client, reg & 0xff, - swab16(data)); + ret = i2c_smbus_write_word_swapped(client, reg & 0xff, data); dev_dbg(&client->dev, "write reg.%03x = %04x -> %d\n", reg, data, ret); return ret; } diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c index 73c0689..93c3ec7 100644 --- a/drivers/media/video/mt9p031.c +++ b/drivers/media/video/mt9p031.c @@ -132,13 +132,12 @@ static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd) static int mt9p031_read(struct i2c_client *client, u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); - return data < 0 ? data : be16_to_cpu(data); + return i2c_smbus_read_word_swapped(client, reg); } static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data) { - return i2c_smbus_write_word_data(client, reg, cpu_to_be16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear, diff --git a/drivers/media/video/mt9t001.c b/drivers/media/video/mt9t001.c index 08074b8..cd81d04a 100644 --- a/drivers/media/video/mt9t001.c +++ b/drivers/media/video/mt9t001.c @@ -133,13 +133,12 @@ static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd) static int mt9t001_read(struct i2c_client *client, u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); - return data < 0 ? data : be16_to_cpu(data); + return i2c_smbus_read_word_swapped(client, reg); } static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data) { - return i2c_smbus_write_word_data(client, reg, cpu_to_be16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear, diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c index 0e78477..84add1a 100644 --- a/drivers/media/video/mt9t031.c +++ b/drivers/media/video/mt9t031.c @@ -90,14 +90,13 @@ static struct mt9t031 *to_mt9t031(const struct i2c_client *client) static int reg_read(struct i2c_client *client, const u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); - return data < 0 ? data : swab16(data); + return i2c_smbus_read_word_swapped(client, reg); } static int reg_write(struct i2c_client *client, const u8 reg, const u16 data) { - return i2c_smbus_write_word_data(client, reg, swab16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int reg_set(struct i2c_client *client, const u8 reg, diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index 690ee0d..9449407 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -130,14 +130,13 @@ static struct mt9v022 *to_mt9v022(const struct i2c_client *client) static int reg_read(struct i2c_client *client, const u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); - return data < 0 ? data : swab16(data); + return i2c_smbus_read_word_swapped(client, reg); } static int reg_write(struct i2c_client *client, const u8 reg, const u16 data) { - return i2c_smbus_write_word_data(client, reg, swab16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int reg_set(struct i2c_client *client, const u8 reg, diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c index f080c16..d90b982 100644 --- a/drivers/media/video/mt9v032.c +++ b/drivers/media/video/mt9v032.c @@ -139,10 +139,10 @@ static struct mt9v032 *to_mt9v032(struct v4l2_subdev *sd) static int mt9v032_read(struct i2c_client *client, const u8 reg) { - s32 data = i2c_smbus_read_word_data(client, reg); + s32 data = i2c_smbus_read_word_swapped(client, reg); dev_dbg(&client->dev, "%s: read 0x%04x from 0x%02x\n", __func__, - swab16(data), reg); - return data < 0 ? data : swab16(data); + data, reg); + return data; } static int mt9v032_write(struct i2c_client *client, const u8 reg, @@ -150,7 +150,7 @@ static int mt9v032_write(struct i2c_client *client, const u8 reg, { dev_dbg(&client->dev, "%s: writing 0x%04x to 0x%02x\n", __func__, data, reg); - return i2c_smbus_write_word_data(client, reg, swab16(data)); + return i2c_smbus_write_word_swapped(client, reg, data); } static int mt9v032_set_chip_control(struct mt9v032 *mt9v032, u16 clear, u16 set) diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 9c5c19f..def6472 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -523,10 +523,50 @@ static int omapvid_apply_changes(struct omap_vout_device *vout) return 0; } +static int omapvid_handle_interlace_display(struct omap_vout_device *vout, + unsigned int irqstatus, struct timeval timevalue) +{ + u32 fid; + + if (vout->first_int) { + vout->first_int = 0; + goto err; + } + + if (irqstatus & DISPC_IRQ_EVSYNC_ODD) + fid = 1; + else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN) + fid = 0; + else + goto err; + + vout->field_id ^= 1; + if (fid != vout->field_id) { + if (fid == 0) + vout->field_id = fid; + } else if (0 == fid) { + if (vout->cur_frm == vout->next_frm) + goto err; + + vout->cur_frm->ts = timevalue; + vout->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&vout->cur_frm->done); + vout->cur_frm = vout->next_frm; + } else { + if (list_empty(&vout->dma_queue) || + (vout->cur_frm != vout->next_frm)) + goto err; + } + + return vout->field_id; +err: + return 0; +} + static void omap_vout_isr(void *arg, unsigned int irqstatus) { - int ret; - u32 addr, fid; + int ret, fid, mgr_id; + u32 addr, irq; struct omap_overlay *ovl; struct timeval timevalue; struct omapvideo_info *ovid; @@ -542,112 +582,73 @@ static void omap_vout_isr(void *arg, unsigned int irqstatus) if (!ovl->manager || !ovl->manager->device) return; + mgr_id = ovl->manager->id; cur_display = ovl->manager->device; spin_lock(&vout->vbq_lock); do_gettimeofday(&timevalue); - if (cur_display->type != OMAP_DISPLAY_TYPE_VENC) { - switch (cur_display->type) { - case OMAP_DISPLAY_TYPE_DPI: - if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2))) - goto vout_isr_err; - break; - case OMAP_DISPLAY_TYPE_HDMI: - if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN)) - goto vout_isr_err; - break; - default: - goto vout_isr_err; - } - if (!vout->first_int && (vout->cur_frm != vout->next_frm)) { - vout->cur_frm->ts = timevalue; - vout->cur_frm->state = VIDEOBUF_DONE; - wake_up_interruptible(&vout->cur_frm->done); - vout->cur_frm = vout->next_frm; - } - vout->first_int = 0; - if (list_empty(&vout->dma_queue)) + switch (cur_display->type) { + case OMAP_DISPLAY_TYPE_DSI: + case OMAP_DISPLAY_TYPE_DPI: + if (mgr_id == OMAP_DSS_CHANNEL_LCD) + irq = DISPC_IRQ_VSYNC; + else if (mgr_id == OMAP_DSS_CHANNEL_LCD2) + irq = DISPC_IRQ_VSYNC2; + else goto vout_isr_err; - vout->next_frm = list_entry(vout->dma_queue.next, - struct videobuf_buffer, queue); - list_del(&vout->next_frm->queue); - - vout->next_frm->state = VIDEOBUF_ACTIVE; + if (!(irqstatus & irq)) + goto vout_isr_err; + break; + case OMAP_DISPLAY_TYPE_VENC: + fid = omapvid_handle_interlace_display(vout, irqstatus, + timevalue); + if (!fid) + goto vout_isr_err; + break; + case OMAP_DISPLAY_TYPE_HDMI: + if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN)) + goto vout_isr_err; + break; + default: + goto vout_isr_err; + } - addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i] - + vout->cropped_offset; + if (!vout->first_int && (vout->cur_frm != vout->next_frm)) { + vout->cur_frm->ts = timevalue; + vout->cur_frm->state = VIDEOBUF_DONE; + wake_up_interruptible(&vout->cur_frm->done); + vout->cur_frm = vout->next_frm; + } - /* First save the configuration in ovelray structure */ - ret = omapvid_init(vout, addr); - if (ret) - printk(KERN_ERR VOUT_NAME - "failed to set overlay info\n"); - /* Enable the pipeline and set the Go bit */ - ret = omapvid_apply_changes(vout); - if (ret) - printk(KERN_ERR VOUT_NAME "failed to change mode\n"); - } else { + vout->first_int = 0; + if (list_empty(&vout->dma_queue)) + goto vout_isr_err; - if (vout->first_int) { - vout->first_int = 0; - goto vout_isr_err; - } - if (irqstatus & DISPC_IRQ_EVSYNC_ODD) - fid = 1; - else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN) - fid = 0; - else - goto vout_isr_err; + vout->next_frm = list_entry(vout->dma_queue.next, + struct videobuf_buffer, queue); + list_del(&vout->next_frm->queue); - vout->field_id ^= 1; - if (fid != vout->field_id) { - if (0 == fid) - vout->field_id = fid; + vout->next_frm->state = VIDEOBUF_ACTIVE; - goto vout_isr_err; - } - if (0 == fid) { - if (vout->cur_frm == vout->next_frm) - goto vout_isr_err; - - vout->cur_frm->ts = timevalue; - vout->cur_frm->state = VIDEOBUF_DONE; - wake_up_interruptible(&vout->cur_frm->done); - vout->cur_frm = vout->next_frm; - } else if (1 == fid) { - if (list_empty(&vout->dma_queue) || - (vout->cur_frm != vout->next_frm)) - goto vout_isr_err; - - vout->next_frm = list_entry(vout->dma_queue.next, - struct videobuf_buffer, queue); - list_del(&vout->next_frm->queue); - - vout->next_frm->state = VIDEOBUF_ACTIVE; - addr = (unsigned long) - vout->queued_buf_addr[vout->next_frm->i] + - vout->cropped_offset; - /* First save the configuration in ovelray structure */ - ret = omapvid_init(vout, addr); - if (ret) - printk(KERN_ERR VOUT_NAME - "failed to set overlay info\n"); - /* Enable the pipeline and set the Go bit */ - ret = omapvid_apply_changes(vout); - if (ret) - printk(KERN_ERR VOUT_NAME - "failed to change mode\n"); - } + addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i] + + vout->cropped_offset; - } + /* First save the configuration in ovelray structure */ + ret = omapvid_init(vout, addr); + if (ret) + printk(KERN_ERR VOUT_NAME + "failed to set overlay info\n"); + /* Enable the pipeline and set the Go bit */ + ret = omapvid_apply_changes(vout); + if (ret) + printk(KERN_ERR VOUT_NAME "failed to change mode\n"); vout_isr_err: spin_unlock(&vout->vbq_lock); } - /* Video buffer call backs */ /* @@ -663,10 +664,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, u32 phy_addr = 0, virt_addr = 0; struct omap_vout_device *vout = q->priv_data; struct omapvideo_info *ovid = &vout->vid_info; + int vid_max_buf_size; if (!vout) return -EINVAL; + vid_max_buf_size = vout->vid == OMAP_VIDEO1 ? video1_bufsize : + video2_bufsize; + if (V4L2_BUF_TYPE_VIDEO_OUTPUT != q->type) return -EINVAL; @@ -689,7 +694,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, video1_numbuffers : video2_numbuffers; /* Check the size of the buffer */ - if (*size > vout->buffer_size) { + if (*size > vid_max_buf_size) { v4l2_err(&vout->vid_dev->v4l2_dev, "buffer allocation mismatch [%u] [%u]\n", *size, vout->buffer_size); diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h index d793501..27a95d2 100644 --- a/drivers/media/video/omap/omap_voutdef.h +++ b/drivers/media/video/omap/omap_voutdef.h @@ -25,7 +25,7 @@ #define MAC_VRFB_CTXS 4 #define MAX_VOUT_DEV 2 #define MAX_OVLS 3 -#define MAX_DISPLAYS 3 +#define MAX_DISPLAYS 10 #define MAX_MANAGERS 3 #define QQVGA_WIDTH 160 diff --git a/drivers/media/video/s5p-g2d/Makefile b/drivers/media/video/s5p-g2d/Makefile new file mode 100644 index 0000000..2c48c41 --- /dev/null +++ b/drivers/media/video/s5p-g2d/Makefile @@ -0,0 +1,3 @@ +s5p-g2d-objs := g2d.o g2d-hw.o + +obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D) += s5p-g2d.o diff --git a/drivers/media/video/s5p-g2d/g2d-hw.c b/drivers/media/video/s5p-g2d/g2d-hw.c new file mode 100644 index 0000000..e5249f3 --- /dev/null +++ b/drivers/media/video/s5p-g2d/g2d-hw.c @@ -0,0 +1,106 @@ +/* + * Samsung S5P G2D - 2D Graphics Accelerator Driver + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include <linux/io.h> + +#include "g2d.h" +#include "g2d-regs.h" + +#define w(x, a) writel((x), d->regs + (a)) +#define r(a) readl(d->regs + (a)) + +/* g2d_reset clears all g2d registers */ +void g2d_reset(struct g2d_dev *d) +{ + w(1, SOFT_RESET_REG); +} + +void g2d_set_src_size(struct g2d_dev *d, struct g2d_frame *f) +{ + u32 n; + u32 stride; + + w(f->stride & 0xFFFF, SRC_STRIDE_REG); + + n = f->o_height & 0xFFF; + n <<= 16; + n |= f->o_width & 0xFFF; + w(n, SRC_LEFT_TOP_REG); + + n = f->bottom & 0xFFF; + n <<= 16; + n |= f->right & 0xFFF; + w(n, SRC_RIGHT_BOTTOM_REG); + + w(f->fmt->hw, SRC_COLOR_MODE_REG); +} + +void g2d_set_src_addr(struct g2d_dev *d, dma_addr_t a) +{ + w(a, SRC_BASE_ADDR_REG); +} + +void g2d_set_dst_size(struct g2d_dev *d, struct g2d_frame *f) +{ + u32 n; + u32 stride; + + w(f->stride & 0xFFFF, DST_STRIDE_REG); + + n = f->o_height & 0xFFF; + n <<= 16; + n |= f->o_width & 0xFFF; + w(n, DST_LEFT_TOP_REG); + + n = f->bottom & 0xFFF; + n <<= 16; + n |= f->right & 0xFFF; + w(n, DST_RIGHT_BOTTOM_REG); + + w(f->fmt->hw, DST_COLOR_MODE_REG); +} + +void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a) +{ + w(a, DST_BASE_ADDR_REG); +} + +void g2d_set_rop4(struct g2d_dev *d, u32 r) +{ + w(r, ROP4_REG); +} + +u32 g2d_cmd_stretch(u32 e) +{ + e &= 1; + return e << 4; +} + +void g2d_set_cmd(struct g2d_dev *d, u32 c) +{ + w(c, BITBLT_COMMAND_REG); +} + +void g2d_start(struct g2d_dev *d) +{ + /* Clear cache */ + w(0x7, CACHECTL_REG); + /* Enable interrupt */ + w(1, INTEN_REG); + /* Start G2D engine */ + w(1, BITBLT_START_REG); +} + +void g2d_clear_int(struct g2d_dev *d) +{ + w(1, INTC_PEND_REG); +} diff --git a/drivers/media/video/s5p-g2d/g2d-regs.h b/drivers/media/video/s5p-g2d/g2d-regs.h new file mode 100644 index 0000000..02e1cf5 --- /dev/null +++ b/drivers/media/video/s5p-g2d/g2d-regs.h @@ -0,0 +1,115 @@ +/* + * Samsung S5P G2D - 2D Graphics Accelerator Driver + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +/* General Registers */ +#define SOFT_RESET_REG 0x0000 /* Software reset reg */ +#define INTEN_REG 0x0004 /* Interrupt Enable reg */ +#define INTC_PEND_REG 0x000C /* Interrupt Control Pending reg */ +#define FIFO_STAT_REG 0x0010 /* Command FIFO Status reg */ +#define AXI_ID_MODE_REG 0x0014 /* AXI Read ID Mode reg */ +#define CACHECTL_REG 0x0018 /* Cache & Buffer clear reg */ +#define AXI_MODE_REG 0x001C /* AXI Mode reg */ + +/* Command Registers */ +#define BITBLT_START_REG 0x0100 /* BitBLT Start reg */ +#define BITBLT_COMMAND_REG 0x0104 /* Command reg for BitBLT */ + +/* Parameter Setting Registers (Rotate & Direction) */ +#define ROTATE_REG 0x0200 /* Rotation reg */ +#define SRC_MSK_DIRECT_REG 0x0204 /* Src and Mask Direction reg */ +#define DST_PAT_DIRECT_REG 0x0208 /* Dest and Pattern Direction reg */ + +/* Parameter Setting Registers (Src) */ +#define SRC_SELECT_REG 0x0300 /* Src Image Selection reg */ +#define SRC_BASE_ADDR_REG 0x0304 /* Src Image Base Address reg */ +#define SRC_STRIDE_REG 0x0308 /* Src Stride reg */ +#define SRC_COLOR_MODE_REG 0x030C /* Src Image Color Mode reg */ +#define SRC_LEFT_TOP_REG 0x0310 /* Src Left Top Coordinate reg */ +#define SRC_RIGHT_BOTTOM_REG 0x0314 /* Src Right Bottom Coordinate reg */ + +/* Parameter Setting Registers (Dest) */ +#define DST_SELECT_REG 0x0400 /* Dest Image Selection reg */ +#define DST_BASE_ADDR_REG 0x0404 /* Dest Image Base Address reg */ +#define DST_STRIDE_REG 0x0408 /* Dest Stride reg */ +#define DST_COLOR_MODE_REG 0x040C /* Dest Image Color Mode reg */ +#define DST_LEFT_TOP_REG 0x0410 /* Dest Left Top Coordinate reg */ +#define DST_RIGHT_BOTTOM_REG 0x0414 /* Dest Right Bottom Coordinate reg */ + +/* Parameter Setting Registers (Pattern) */ +#define PAT_BASE_ADDR_REG 0x0500 /* Pattern Image Base Address reg */ +#define PAT_SIZE_REG 0x0504 /* Pattern Image Size reg */ +#define PAT_COLOR_MODE_REG 0x0508 /* Pattern Image Color Mode reg */ +#define PAT_OFFSET_REG 0x050C /* Pattern Left Top Coordinate reg */ +#define PAT_STRIDE_REG 0x0510 /* Pattern Stride reg */ + +/* Parameter Setting Registers (Mask) */ +#define MASK_BASE_ADDR_REG 0x0520 /* Mask Base Address reg */ +#define MASK_STRIDE_REG 0x0524 /* Mask Stride reg */ + +/* Parameter Setting Registers (Clipping Window) */ +#define CW_LT_REG 0x0600 /* LeftTop coordinates of Clip Window */ +#define CW_RB_REG 0x0604 /* RightBottom coordinates of Clip + Window */ + +/* Parameter Setting Registers (ROP & Alpha Setting) */ +#define THIRD_OPERAND_REG 0x0610 /* Third Operand Selection reg */ +#define ROP4_REG 0x0614 /* Raster Operation reg */ +#define ALPHA_REG 0x0618 /* Alpha value, Fading offset value */ + +/* Parameter Setting Registers (Color) */ +#define FG_COLOR_REG 0x0700 /* Foreground Color reg */ +#define BG_COLOR_REG 0x0704 /* Background Color reg */ +#define BS_COLOR_REG 0x0708 /* Blue Screen Color reg */ + +/* Parameter Setting Registers (Color Key) */ +#define SRC_COLORKEY_CTRL_REG 0x0710 /* Src Colorkey control reg */ +#define SRC_COLORKEY_DR_MIN_REG 0x0714 /* Src Colorkey Decision Reference + Min reg */ +#define SRC_COLORKEY_DR_MAX_REG 0x0718 /* Src Colorkey Decision Reference + Max reg */ +#define DST_COLORKEY_CTRL_REG 0x071C /* Dest Colorkey control reg */ +#define DST_COLORKEY_DR_MIN_REG 0x0720 /* Dest Colorkey Decision Reference + Min reg */ +#define DST_COLORKEY_DR_MAX_REG 0x0724 /* Dest Colorkey Decision Reference + Max reg */ + +/* Color mode values */ + +#define ORDER_XRGB 0 +#define ORDER_RGBX 1 +#define ORDER_XBGR 2 +#define ORDER_BGRX 3 + +#define MODE_XRGB_8888 0 +#define MODE_ARGB_8888 1 +#define MODE_RGB_565 2 +#define MODE_XRGB_1555 3 +#define MODE_ARGB_1555 4 +#define MODE_XRGB_4444 5 +#define MODE_ARGB_4444 6 +#define MODE_PACKED_RGB_888 7 + +#define COLOR_MODE(o, m) (((o) << 4) | (m)) + +/* ROP4 operation values */ +#define ROP4_COPY 0xCCCC +#define ROP4_INVERT 0x3333 + +/* Hardware limits */ +#define MAX_WIDTH 8000 +#define MAX_HEIGHT 8000 + +#define G2D_TIMEOUT 500 + +#define DEFAULT_WIDTH 100 +#define DEFAULT_HEIGHT 100 + diff --git a/drivers/media/video/s5p-g2d/g2d.c b/drivers/media/video/s5p-g2d/g2d.c new file mode 100644 index 0000000..1f156c8 --- /dev/null +++ b/drivers/media/video/s5p-g2d/g2d.c @@ -0,0 +1,824 @@ +/* + * Samsung S5P G2D - 2D Graphics Accelerator Driver + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/version.h> +#include <linux/timer.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/interrupt.h> + +#include <linux/platform_device.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> + +#include "g2d.h" +#include "g2d-regs.h" + +#define fh2ctx(__fh) container_of(__fh, struct g2d_ctx, fh) + +static struct g2d_fmt formats[] = { + { + .name = "XRGB_8888", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = 32, + .hw = COLOR_MODE(ORDER_XRGB, MODE_XRGB_8888), + }, + { + .name = "RGB_565", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = 16, + .hw = COLOR_MODE(ORDER_XRGB, MODE_RGB_565), + }, + { + .name = "XRGB_1555", + .fourcc = V4L2_PIX_FMT_RGB555X, + .depth = 16, + .hw = COLOR_MODE(ORDER_XRGB, MODE_XRGB_1555), + }, + { + .name = "XRGB_4444", + .fourcc = V4L2_PIX_FMT_RGB444, + .depth = 16, + .hw = COLOR_MODE(ORDER_XRGB, MODE_XRGB_4444), + }, + { + .name = "PACKED_RGB_888", + .fourcc = V4L2_PIX_FMT_RGB24, + .depth = 24, + .hw = COLOR_MODE(ORDER_XRGB, MODE_PACKED_RGB_888), + }, +}; +#define NUM_FORMATS ARRAY_SIZE(formats) + +struct g2d_frame def_frame = { + .width = DEFAULT_WIDTH, + .height = DEFAULT_HEIGHT, + .c_width = DEFAULT_WIDTH, + .c_height = DEFAULT_HEIGHT, + .o_width = 0, + .o_height = 0, + .fmt = &formats[0], + .right = DEFAULT_WIDTH, + .bottom = DEFAULT_HEIGHT, +}; + +struct g2d_fmt *find_fmt(struct v4l2_format *f) +{ + unsigned int i; + for (i = 0; i < NUM_FORMATS; i++) { + if (formats[i].fourcc == f->fmt.pix.pixelformat) + return &formats[i]; + } + return NULL; +} + + +static struct g2d_frame *get_frame(struct g2d_ctx *ctx, + enum v4l2_buf_type type) +{ + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OUTPUT: + return &ctx->in; + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &ctx->out; + default: + return ERR_PTR(-EINVAL); + } +} + +static int g2d_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) +{ + struct g2d_ctx *ctx = vb2_get_drv_priv(vq); + struct g2d_frame *f = get_frame(ctx, vq->type); + + if (IS_ERR(f)) + return PTR_ERR(f); + + sizes[0] = f->size; + *nplanes = 1; + alloc_ctxs[0] = ctx->dev->alloc_ctx; + + if (*nbuffers == 0) + *nbuffers = 1; + + return 0; +} + +static int g2d_buf_prepare(struct vb2_buffer *vb) +{ + struct g2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct g2d_frame *f = get_frame(ctx, vb->vb2_queue->type); + + if (IS_ERR(f)) + return PTR_ERR(f); + vb2_set_plane_payload(vb, 0, f->size); + return 0; +} + +static void g2d_buf_queue(struct vb2_buffer *vb) +{ + struct g2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); +} + + +static struct vb2_ops g2d_qops = { + .queue_setup = g2d_queue_setup, + .buf_prepare = g2d_buf_prepare, + .buf_queue = g2d_buf_queue, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct g2d_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR; + src_vq->drv_priv = ctx; + src_vq->ops = &g2d_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR; + dst_vq->drv_priv = ctx; + dst_vq->ops = &g2d_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); + + return vb2_queue_init(dst_vq); +} + +static int g2d_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct g2d_ctx *ctx = container_of(ctrl->handler, struct g2d_ctx, + ctrl_handler); + switch (ctrl->id) { + case V4L2_CID_COLORFX: + if (ctrl->val == V4L2_COLORFX_NEGATIVE) + ctx->rop = ROP4_INVERT; + else + ctx->rop = ROP4_COPY; + default: + v4l2_err(&ctx->dev->v4l2_dev, "unknown control\n"); + return -EINVAL; + } + return 0; +} + +static const struct v4l2_ctrl_ops g2d_ctrl_ops = { + .s_ctrl = g2d_s_ctrl, +}; + +int g2d_setup_ctrls(struct g2d_ctx *ctx) +{ + struct g2d_dev *dev = ctx->dev; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 1); + if (ctx->ctrl_handler.error) { + v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); + return ctx->ctrl_handler.error; + } + + v4l2_ctrl_new_std_menu( + &ctx->ctrl_handler, + &g2d_ctrl_ops, + V4L2_CID_COLORFX, + V4L2_COLORFX_NEGATIVE, + ~((1 << V4L2_COLORFX_NONE) | (1 << V4L2_COLORFX_NEGATIVE)), + V4L2_COLORFX_NONE); + + if (ctx->ctrl_handler.error) { + v4l2_err(&dev->v4l2_dev, "v4l2_ctrl_handler_init failed\n"); + return ctx->ctrl_handler.error; + } + + return 0; +} + +static int g2d_open(struct file *file) +{ + struct g2d_dev *dev = video_drvdata(file); + struct g2d_ctx *ctx = NULL; + int ret = 0; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + ctx->dev = dev; + /* Set default formats */ + ctx->in = def_frame; + ctx->out = def_frame; + + ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init); + if (IS_ERR(ctx->m2m_ctx)) { + ret = PTR_ERR(ctx->m2m_ctx); + kfree(ctx); + return ret; + } + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + g2d_setup_ctrls(ctx); + + /* Write the default values to the ctx struct */ + v4l2_ctrl_handler_setup(&ctx->ctrl_handler); + + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + + v4l2_info(&dev->v4l2_dev, "instance opened\n"); + return 0; +} + +static int g2d_release(struct file *file) +{ + struct g2d_dev *dev = video_drvdata(file); + struct g2d_ctx *ctx = fh2ctx(file->private_data); + + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + v4l2_info(&dev->v4l2_dev, "instance closed\n"); + return 0; +} + + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strncpy(cap->driver, G2D_NAME, sizeof(cap->driver) - 1); + strncpy(cap->card, G2D_NAME, sizeof(cap->card) - 1); + cap->bus_info[0] = 0; + cap->version = KERNEL_VERSION(1, 0, 0); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT + | V4L2_CAP_STREAMING; + return 0; +} + +static int vidioc_enum_fmt(struct file *file, void *prv, struct v4l2_fmtdesc *f) +{ + struct g2d_fmt *fmt; + if (f->index >= NUM_FORMATS) + return -EINVAL; + fmt = &formats[f->index]; + f->pixelformat = fmt->fourcc; + strncpy(f->description, fmt->name, sizeof(f->description) - 1); + return 0; +} + +static int vidioc_g_fmt(struct file *file, void *prv, struct v4l2_format *f) +{ + struct g2d_ctx *ctx = prv; + struct vb2_queue *vq; + struct g2d_frame *frm; + + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (!vq) + return -EINVAL; + frm = get_frame(ctx, f->type); + if (IS_ERR(frm)) + return PTR_ERR(frm); + + f->fmt.pix.width = frm->width; + f->fmt.pix.height = frm->height; + f->fmt.pix.field = V4L2_FIELD_NONE; + f->fmt.pix.pixelformat = frm->fmt->fourcc; + f->fmt.pix.bytesperline = (frm->width * frm->fmt->depth) >> 3; + f->fmt.pix.sizeimage = frm->size; + return 0; +} + +static int vidioc_try_fmt(struct file *file, void *prv, struct v4l2_format *f) +{ + struct g2d_fmt *fmt; + enum v4l2_field *field; + + fmt = find_fmt(f); + if (!fmt) + return -EINVAL; + + field = &f->fmt.pix.field; + if (*field == V4L2_FIELD_ANY) + *field = V4L2_FIELD_NONE; + else if (*field != V4L2_FIELD_NONE) + return -EINVAL; + + if (f->fmt.pix.width > MAX_WIDTH) + f->fmt.pix.width = MAX_WIDTH; + if (f->fmt.pix.height > MAX_HEIGHT) + f->fmt.pix.height = MAX_HEIGHT; + + if (f->fmt.pix.width < 1) + f->fmt.pix.width = 1; + if (f->fmt.pix.height < 1) + f->fmt.pix.height = 1; + + f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + return 0; +} + +static int vidioc_s_fmt(struct file *file, void *prv, struct v4l2_format *f) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + struct vb2_queue *vq; + struct g2d_frame *frm; + struct g2d_fmt *fmt; + int ret = 0; + + /* Adjust all values accordingly to the hardware capabilities + * and chosen format. */ + ret = vidioc_try_fmt(file, prv, f); + if (ret) + return ret; + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); + if (vb2_is_busy(vq)) { + v4l2_err(&dev->v4l2_dev, "queue (%d) bust\n", f->type); + return -EBUSY; + } + frm = get_frame(ctx, f->type); + if (IS_ERR(frm)) + return PTR_ERR(frm); + fmt = find_fmt(f); + if (!fmt) + return -EINVAL; + frm->width = f->fmt.pix.width; + frm->height = f->fmt.pix.height; + frm->size = f->fmt.pix.sizeimage; + /* Reset crop settings */ + frm->o_width = 0; + frm->o_height = 0; + frm->c_width = frm->width; + frm->c_height = frm->height; + frm->right = frm->width; + frm->bottom = frm->height; + frm->fmt = fmt; + frm->stride = f->fmt.pix.bytesperline; + return 0; +} + +static unsigned int g2d_poll(struct file *file, struct poll_table_struct *wait) +{ + struct g2d_ctx *ctx = fh2ctx(file->private_data); + return v4l2_m2m_poll(file, ctx->m2m_ctx, wait); +} + +static int g2d_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct g2d_ctx *ctx = fh2ctx(file->private_data); + return v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *reqbufs) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *buf) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); +} + + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct g2d_ctx *ctx = priv; + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); +} + +static int vidioc_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cr) +{ + struct g2d_ctx *ctx = priv; + struct g2d_frame *f; + + f = get_frame(ctx, cr->type); + if (IS_ERR(f)) + return PTR_ERR(f); + + cr->bounds.left = 0; + cr->bounds.top = 0; + cr->bounds.width = f->width; + cr->bounds.height = f->height; + cr->defrect = cr->bounds; + return 0; +} + +static int vidioc_g_crop(struct file *file, void *prv, struct v4l2_crop *cr) +{ + struct g2d_ctx *ctx = prv; + struct g2d_frame *f; + + f = get_frame(ctx, cr->type); + if (IS_ERR(f)) + return PTR_ERR(f); + + cr->c.left = f->o_height; + cr->c.top = f->o_width; + cr->c.width = f->c_width; + cr->c.height = f->c_height; + return 0; +} + +static int vidioc_try_crop(struct file *file, void *prv, struct v4l2_crop *cr) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + struct g2d_frame *f; + + f = get_frame(ctx, cr->type); + if (IS_ERR(f)) + return PTR_ERR(f); + + if (cr->c.top < 0 || cr->c.left < 0) { + v4l2_err(&dev->v4l2_dev, + "doesn't support negative values for top & left\n"); + return -EINVAL; + } + + return 0; +} + +static int vidioc_s_crop(struct file *file, void *prv, struct v4l2_crop *cr) +{ + struct g2d_ctx *ctx = prv; + struct g2d_frame *f; + int ret; + + ret = vidioc_try_crop(file, prv, cr); + if (ret) + return ret; + f = get_frame(ctx, cr->type); + if (IS_ERR(f)) + return PTR_ERR(f); + + f->c_width = cr->c.width; + f->c_height = cr->c.height; + f->o_width = cr->c.left; + f->o_height = cr->c.top; + f->bottom = f->o_height + f->c_height; + f->right = f->o_width + f->c_width; + return 0; +} + +static void g2d_lock(void *prv) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + mutex_lock(&dev->mutex); +} + +static void g2d_unlock(void *prv) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + mutex_unlock(&dev->mutex); +} + +static void job_abort(void *prv) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + int ret; + + if (dev->curr == 0) /* No job currently running */ + return; + + ret = wait_event_timeout(dev->irq_queue, + dev->curr == 0, + msecs_to_jiffies(G2D_TIMEOUT)); +} + +static void device_run(void *prv) +{ + struct g2d_ctx *ctx = prv; + struct g2d_dev *dev = ctx->dev; + struct vb2_buffer *src, *dst; + u32 cmd = 0; + + dev->curr = ctx; + + src = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + + clk_enable(dev->gate); + g2d_reset(dev); + + g2d_set_src_size(dev, &ctx->in); + g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0)); + + g2d_set_dst_size(dev, &ctx->out); + g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0)); + + g2d_set_rop4(dev, ctx->rop); + if (ctx->in.c_width != ctx->out.c_width || + ctx->in.c_height != ctx->out.c_height) + cmd |= g2d_cmd_stretch(1); + g2d_set_cmd(dev, cmd); + g2d_start(dev); +} + +static irqreturn_t g2d_isr(int irq, void *prv) +{ + struct g2d_dev *dev = prv; + struct g2d_ctx *ctx = dev->curr; + struct vb2_buffer *src, *dst; + + g2d_clear_int(dev); + clk_disable(dev->gate); + + BUG_ON(ctx == 0); + + src = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + dst = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + + BUG_ON(src == 0); + BUG_ON(dst == 0); + + v4l2_m2m_buf_done(src, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE); + v4l2_m2m_job_finish(dev->m2m_dev, ctx->m2m_ctx); + + dev->curr = 0; + wake_up(&dev->irq_queue); + return IRQ_HANDLED; +} + +static const struct v4l2_file_operations g2d_fops = { + .owner = THIS_MODULE, + .open = g2d_open, + .release = g2d_release, + .poll = g2d_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = g2d_mmap, +}; + +static const struct v4l2_ioctl_ops g2d_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt, + + .vidioc_enum_fmt_vid_out = vidioc_enum_fmt, + .vidioc_g_fmt_vid_out = vidioc_g_fmt, + .vidioc_try_fmt_vid_out = vidioc_try_fmt, + .vidioc_s_fmt_vid_out = vidioc_s_fmt, + + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + + .vidioc_g_crop = vidioc_g_crop, + .vidioc_s_crop = vidioc_s_crop, + .vidioc_cropcap = vidioc_cropcap, +}; + +static struct video_device g2d_videodev = { + .name = G2D_NAME, + .fops = &g2d_fops, + .ioctl_ops = &g2d_ioctl_ops, + .minor = -1, + .release = video_device_release, +}; + +static struct v4l2_m2m_ops g2d_m2m_ops = { + .device_run = device_run, + .job_abort = job_abort, + .lock = g2d_lock, + .unlock = g2d_unlock, +}; + +static int g2d_probe(struct platform_device *pdev) +{ + struct g2d_dev *dev; + struct video_device *vfd; + struct resource *res; + int ret = 0; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + spin_lock_init(&dev->irqlock); + mutex_init(&dev->mutex); + atomic_set(&dev->num_inst, 0); + init_waitqueue_head(&dev->irq_queue); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to find registers\n"); + ret = -ENOENT; + goto free_dev; + } + + dev->res_regs = request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev)); + + if (!dev->res_regs) { + dev_err(&pdev->dev, "failed to obtain register region\n"); + ret = -ENOENT; + goto free_dev; + } + + dev->regs = ioremap(res->start, resource_size(res)); + if (!dev->regs) { + dev_err(&pdev->dev, "failed to map registers\n"); + ret = -ENOENT; + goto rel_res_regs; + } + + dev->clk = clk_get(&pdev->dev, "sclk_fimg2d"); + if (IS_ERR_OR_NULL(dev->clk)) { + dev_err(&pdev->dev, "failed to get g2d clock\n"); + ret = -ENXIO; + goto unmap_regs; + } + + dev->gate = clk_get(&pdev->dev, "fimg2d"); + if (IS_ERR_OR_NULL(dev->gate)) { + dev_err(&pdev->dev, "failed to get g2d clock gate\n"); + ret = -ENXIO; + goto put_clk; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, "failed to find IRQ\n"); + ret = -ENXIO; + goto put_clk_gate; + } + + dev->irq = res->start; + + ret = request_irq(dev->irq, g2d_isr, 0, pdev->name, dev); + if (ret) { + dev_err(&pdev->dev, "failed to install IRQ\n"); + goto put_clk_gate; + } + + dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); + if (IS_ERR(dev->alloc_ctx)) { + ret = PTR_ERR(dev->alloc_ctx); + goto rel_irq; + } + + ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); + if (ret) + goto alloc_ctx_cleanup; + vfd = video_device_alloc(); + if (!vfd) { + v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n"); + ret = -ENOMEM; + goto unreg_v4l2_dev; + } + *vfd = g2d_videodev; + vfd->lock = &dev->mutex; + ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + goto rel_vdev; + } + video_set_drvdata(vfd, dev); + snprintf(vfd->name, sizeof(vfd->name), "%s", g2d_videodev.name); + dev->vfd = vfd; + v4l2_info(&dev->v4l2_dev, "device registered as /dev/video%d\n", + vfd->num); + platform_set_drvdata(pdev, dev); + dev->m2m_dev = v4l2_m2m_init(&g2d_m2m_ops); + if (IS_ERR(dev->m2m_dev)) { + v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(dev->m2m_dev); + goto unreg_video_dev; + } + + def_frame.stride = (def_frame.width * def_frame.fmt->depth) >> 3; + + return 0; + +unreg_video_dev: + video_unregister_device(dev->vfd); +rel_vdev: + video_device_release(vfd); +unreg_v4l2_dev: + v4l2_device_unregister(&dev->v4l2_dev); +alloc_ctx_cleanup: + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); +rel_irq: + free_irq(dev->irq, dev); +put_clk_gate: + clk_put(dev->gate); +put_clk: + clk_put(dev->clk); +unmap_regs: + iounmap(dev->regs); +rel_res_regs: + release_resource(dev->res_regs); +free_dev: + kfree(dev); + return ret; +} + +static int g2d_remove(struct platform_device *pdev) +{ + struct g2d_dev *dev = (struct g2d_dev *)platform_get_drvdata(pdev); + + v4l2_info(&dev->v4l2_dev, "Removing " G2D_NAME); + v4l2_m2m_release(dev->m2m_dev); + video_unregister_device(dev->vfd); + v4l2_device_unregister(&dev->v4l2_dev); + vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); + free_irq(dev->irq, dev); + clk_put(dev->gate); + clk_put(dev->clk); + iounmap(dev->regs); + release_resource(dev->res_regs); + kfree(dev); + return 0; +} + +static struct platform_driver g2d_pdrv = { + .probe = g2d_probe, + .remove = g2d_remove, + .driver = { + .name = G2D_NAME, + .owner = THIS_MODULE, + }, +}; + +static void __exit g2d_exit(void) +{ + platform_driver_unregister(&g2d_pdrv); +}; + +static int __init g2d_init(void) +{ + int ret = 0; + + ret = platform_driver_register(&g2d_pdrv); + return ret; +}; + +module_init(g2d_init); +module_exit(g2d_exit); + +MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); +MODULE_DESCRIPTION("S5P G2D 2d graphics accelerator driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/s5p-g2d/g2d.h b/drivers/media/video/s5p-g2d/g2d.h new file mode 100644 index 0000000..5eae901 --- /dev/null +++ b/drivers/media/video/s5p-g2d/g2d.h @@ -0,0 +1,83 @@ +/* + * Samsung S5P G2D - 2D Graphics Accelerator Driver + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Kamil Debski, <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the + * License, or (at your option) any later version + */ + +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +#define G2D_NAME "s5p-g2d" + +struct g2d_dev { + struct v4l2_device v4l2_dev; + struct v4l2_m2m_dev *m2m_dev; + struct video_device *vfd; + struct mutex mutex; + spinlock_t irqlock; + atomic_t num_inst; + struct vb2_alloc_ctx *alloc_ctx; + struct resource *res_regs; + void __iomem *regs; + struct clk *clk; + struct clk *gate; + struct g2d_ctx *curr; + int irq; + wait_queue_head_t irq_queue; +}; + +struct g2d_frame { + /* Original dimensions */ + u32 width; + u32 height; + /* Crop size */ + u32 c_width; + u32 c_height; + /* Offset */ + u32 o_width; + u32 o_height; + /* Image format */ + struct g2d_fmt *fmt; + /* Variables that can calculated once and reused */ + u32 stride; + u32 bottom; + u32 right; + u32 size; +}; + +struct g2d_ctx { + struct v4l2_fh fh; + struct g2d_dev *dev; + struct v4l2_m2m_ctx *m2m_ctx; + struct g2d_frame in; + struct g2d_frame out; + struct v4l2_ctrl_handler ctrl_handler; + u32 rop; +}; + +struct g2d_fmt { + char *name; + u32 fourcc; + int depth; + u32 hw; +}; + + +void g2d_reset(struct g2d_dev *d); +void g2d_set_src_size(struct g2d_dev *d, struct g2d_frame *f); +void g2d_set_src_addr(struct g2d_dev *d, dma_addr_t a); +void g2d_set_dst_size(struct g2d_dev *d, struct g2d_frame *f); +void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a); +void g2d_start(struct g2d_dev *d); +void g2d_clear_int(struct g2d_dev *d); +void g2d_set_rop4(struct g2d_dev *d, u32 r); +u32 g2d_cmd_stretch(u32 e); +void g2d_set_cmd(struct g2d_dev *d, u32 c); + + diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 0f9fb99..065d0f6 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5691,6 +5691,27 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE1, }, }, + [SAA7134_BOARD_SENSORAY811_911] = { + .name = "Sensoray 811/911", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + }, { + .name = name_comp3, + .vmux = 2, + .amux = LINE1, + }, { + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + } }, + }, }; @@ -6914,6 +6935,18 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0xd136, .driver_data = SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2, }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x6000, + .subdevice = 0x0811, + .driver_data = SAA7134_BOARD_SENSORAY811_911, + }, { + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x6000, + .subdevice = 0x0911, + .driver_data = SAA7134_BOARD_SENSORAY811_911, + }, { /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 9b55068..4ad9de4 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -330,6 +330,7 @@ struct saa7134_card_ir { #define SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2 185 #define SAA7134_BOARD_BEHOLD_501 186 #define SAA7134_BOARD_BEHOLD_503FM 187 +#define SAA7134_BOARD_SENSORAY811_911 188 #define SAA7134_MAXBOARDS 32 #define SAA7134_INPUT_MAX 8 diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 6abaa16..fc91a1e 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -703,21 +703,21 @@ static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std) /* First tests should be against specific std */ if (std == V4L2_STD_ALL) { - fmt = 0; /* Autodetect mode */ + fmt = VIDEO_STD_AUTO_SWITCH_BIT; /* Autodetect mode */ } else if (std & V4L2_STD_NTSC_443) { - fmt = 0xa; + fmt = VIDEO_STD_NTSC_4_43_BIT; } else if (std & V4L2_STD_PAL_M) { - fmt = 0x6; + fmt = VIDEO_STD_PAL_M_BIT; } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { - fmt = 0x8; + fmt = VIDEO_STD_PAL_COMBINATION_N_BIT; } else { /* Then, test against generic ones */ if (std & V4L2_STD_NTSC) - fmt = 0x2; + fmt = VIDEO_STD_NTSC_MJ_BIT; else if (std & V4L2_STD_PAL) - fmt = 0x4; + fmt = VIDEO_STD_PAL_BDGHIN_BIT; else if (std & V4L2_STD_SECAM) - fmt = 0xc; + fmt = VIDEO_STD_SECAM_BIT; } v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt); diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index d7f9751..89fec02 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -110,42 +110,20 @@ static inline int usb_find_address(struct i2c_adapter *i2c_adap, unsigned char addr; int ret; - if ((flags & I2C_M_TEN)) { - /* a ten bit address */ - addr = 0xf0 | ((msg->addr >> 7) & 0x03); - /* try extended address code... */ - ret = try_write_address(i2c_adap, addr, retries); - if (ret != 1) { - dev_err(&i2c_adap->dev, - "died at extended address code, while writing\n"); - return -EREMOTEIO; - } - add[0] = addr; - if (flags & I2C_M_RD) { - /* okay, now switch into reading mode */ - addr |= 0x01; - ret = try_read_address(i2c_adap, addr, retries); - if (ret != 1) { - dev_err(&i2c_adap->dev, - "died at extended address code, while reading\n"); - return -EREMOTEIO; - } - } - } else { /* normal 7bit address */ - addr = (msg->addr << 1); - if (flags & I2C_M_RD) - addr |= 1; + addr = (msg->addr << 1); + if (flags & I2C_M_RD) + addr |= 1; - add[0] = addr; - if (flags & I2C_M_RD) - ret = try_read_address(i2c_adap, addr, retries); - else - ret = try_write_address(i2c_adap, addr, retries); + add[0] = addr; + if (flags & I2C_M_RD) + ret = try_read_address(i2c_adap, addr, retries); + else + ret = try_write_address(i2c_adap, addr, retries); + + if (ret != 1) + return -EREMOTEIO; - if (ret != 1) - return -EREMOTEIO; - } return 0; } @@ -184,7 +162,7 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) static u32 functionality(struct i2c_adapter *adap) { - return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } /* -----exported algorithm data: ------------------------------------- */ diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c index cbf13d0..6a82875 100644 --- a/drivers/media/video/via-camera.c +++ b/drivers/media/video/via-camera.c @@ -156,14 +156,10 @@ static struct via_format { .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8, .bpp = 2, }, - { - .desc = "RGB 565", - .pixelformat = V4L2_PIX_FMT_RGB565, - .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE, - .bpp = 2, - }, /* RGB444 and Bayer should be doable, but have never been - tested with this driver. */ + tested with this driver. RGB565 seems to work at the default + resolution, but results in color corruption when being scaled by + viacam_set_scaled(), and is disabled as a result. */ }; #define N_VIA_FMTS ARRAY_SIZE(via_formats) |
