summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/omap1_camera.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/omap1_camera.c')
-rw-r--r--drivers/media/video/omap1_camera.c1702
1 files changed, 1702 insertions, 0 deletions
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
new file mode 100644
index 0000000..7c30e62b
--- /dev/null
+++ b/drivers/media/video/omap1_camera.c
@@ -0,0 +1,1702 @@
+/*
+ * V4L2 SoC Camera driver for OMAP1 Camera Interface
+ *
+ * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ *
+ * Based on V4L2 Driver for i.MXL/i.MXL camera (CSI) host
+ * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * Based on PXA SoC camera driver
+ * Copyright (C) 2006, Sascha Hauer, Pengutronix
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * Hardware specific bits initialy based on former work by Matt Callow
+ * drivers/media/video/omap/omap1510cam.c
+ * Copyright (C) 2006 Matt Callow
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+
+#include <media/omap1_camera.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/videobuf-dma-sg.h>
+
+#include <plat/dma.h>
+
+
+#define DRIVER_NAME "omap1-camera"
+#define VERSION_CODE KERNEL_VERSION(0, 0, 1)
+
+
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP1 Camera Interface registers
+ * ---------------------------------------------------------------------------
+ */
+
+#define REG_CTRLCLOCK 0x00
+#define REG_IT_STATUS 0x04
+#define REG_MODE 0x08
+#define REG_STATUS 0x0C
+#define REG_CAMDATA 0x10
+#define REG_GPIO 0x14
+#define REG_PEAK_COUNTER 0x18
+
+/* CTRLCLOCK bit shifts */
+#define LCLK_EN BIT(7)
+#define DPLL_EN BIT(6)
+#define MCLK_EN BIT(5)
+#define CAMEXCLK_EN BIT(4)
+#define POLCLK BIT(3)
+#define FOSCMOD_SHIFT 0
+#define FOSCMOD_MASK (0x7 << FOSCMOD_SHIFT)
+#define FOSCMOD_12MHz 0x0
+#define FOSCMOD_6MHz 0x2
+#define FOSCMOD_9_6MHz 0x4
+#define FOSCMOD_24MHz 0x5
+#define FOSCMOD_8MHz 0x6
+
+/* IT_STATUS bit shifts */
+#define DATA_TRANSFER BIT(5)
+#define FIFO_FULL BIT(4)
+#define H_DOWN BIT(3)
+#define H_UP BIT(2)
+#define V_DOWN BIT(1)
+#define V_UP BIT(0)
+
+/* MODE bit shifts */
+#define RAZ_FIFO BIT(18)
+#define EN_FIFO_FULL BIT(17)
+#define EN_NIRQ BIT(16)
+#define THRESHOLD_SHIFT 9
+#define THRESHOLD_MASK (0x7f << THRESHOLD_SHIFT)
+#define DMA BIT(8)
+#define EN_H_DOWN BIT(7)
+#define EN_H_UP BIT(6)
+#define EN_V_DOWN BIT(5)
+#define EN_V_UP BIT(4)
+#define ORDERCAMD BIT(3)
+
+#define IRQ_MASK (EN_V_UP | EN_V_DOWN | EN_H_UP | EN_H_DOWN | \
+ EN_NIRQ | EN_FIFO_FULL)
+
+/* STATUS bit shifts */
+#define HSTATUS BIT(1)
+#define VSTATUS BIT(0)
+
+/* GPIO bit shifts */
+#define CAM_RST BIT(0)
+
+/* end of OMAP1 Camera Interface registers */
+
+
+#define SOCAM_BUS_FLAGS (SOCAM_MASTER | \
+ SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | \
+ SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
+ SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8)
+
+
+#define FIFO_SIZE ((THRESHOLD_MASK >> THRESHOLD_SHIFT) + 1)
+#define FIFO_SHIFT __fls(FIFO_SIZE)
+
+#define DMA_BURST_SHIFT (1 + OMAP_DMA_DATA_BURST_4)
+#define DMA_BURST_SIZE (1 << DMA_BURST_SHIFT)
+
+#define DMA_ELEMENT_SHIFT OMAP_DMA_DATA_TYPE_S32
+#define DMA_ELEMENT_SIZE (1 << DMA_ELEMENT_SHIFT)
+
+#define DMA_FRAME_SHIFT_CONTIG (FIFO_SHIFT - 1)
+#define DMA_FRAME_SHIFT_SG DMA_BURST_SHIFT
+
+#define DMA_FRAME_SHIFT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? \
+ DMA_FRAME_SHIFT_CONTIG : \
+ DMA_FRAME_SHIFT_SG)
+#define DMA_FRAME_SIZE(x) (1 << DMA_FRAME_SHIFT(x))
+#define DMA_SYNC OMAP_DMA_SYNC_FRAME
+#define THRESHOLD_LEVEL DMA_FRAME_SIZE
+
+
+#define MAX_VIDEO_MEM 4 /* arbitrary video memory limit in MB */
+
+
+/*
+ * Structures
+ */
+
+/* buffer for one video frame */
+struct omap1_cam_buf {
+ struct videobuf_buffer vb;
+ enum v4l2_mbus_pixelcode code;
+ int inwork;
+ struct scatterlist *sgbuf;
+ int sgcount;
+ int bytes_left;
+ enum videobuf_state result;
+};
+
+struct omap1_cam_dev {
+ struct soc_camera_host soc_host;
+ struct soc_camera_device *icd;
+ struct clk *clk;
+
+ unsigned int irq;
+ void __iomem *base;
+
+ int dma_ch;
+
+ struct omap1_cam_platform_data *pdata;
+ struct resource *res;
+ unsigned long pflags;
+ unsigned long camexclk;
+
+ struct list_head capture;
+
+ /* lock used to protect videobuf */
+ spinlock_t lock;
+
+ /* Pointers to DMA buffers */
+ struct omap1_cam_buf *active;
+ struct omap1_cam_buf *ready;
+
+ enum omap1_cam_vb_mode vb_mode;
+ int (*mmap_mapper)(struct videobuf_queue *q,
+ struct videobuf_buffer *buf,
+ struct vm_area_struct *vma);
+
+ u32 reg_cache[0];
+};
+
+
+static void cam_write(struct omap1_cam_dev *pcdev, u16 reg, u32 val)
+{
+ pcdev->reg_cache[reg / sizeof(u32)] = val;
+ __raw_writel(val, pcdev->base + reg);
+}
+
+static u32 cam_read(struct omap1_cam_dev *pcdev, u16 reg, bool from_cache)
+{
+ return !from_cache ? __raw_readl(pcdev->base + reg) :
+ pcdev->reg_cache[reg / sizeof(u32)];
+}
+
+#define CAM_READ(pcdev, reg) \
+ cam_read(pcdev, REG_##reg, false)
+#define CAM_WRITE(pcdev, reg, val) \
+ cam_write(pcdev, REG_##reg, val)
+#define CAM_READ_CACHE(pcdev, reg) \
+ cam_read(pcdev, REG_##reg, true)
+
+/*
+ * Videobuf operations
+ */
+static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
+ unsigned int *size)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+
+ if (bytes_per_line < 0)
+ return bytes_per_line;
+
+ *size = bytes_per_line * icd->user_height;
+
+ if (!*count || *count < OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode))
+ *count = OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode);
+
+ if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
+ *count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
+
+ dev_dbg(icd->dev.parent,
+ "%s: count=%d, size=%d\n", __func__, *count, *size);
+
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
+ enum omap1_cam_vb_mode vb_mode)
+{
+ struct videobuf_buffer *vb = &buf->vb;
+
+ BUG_ON(in_interrupt());
+
+ videobuf_waiton(vb, 0, 0);
+
+ if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ videobuf_dma_contig_free(vq, vb);
+ } else {
+ struct soc_camera_device *icd = vq->priv_data;
+ struct device *dev = icd->dev.parent;
+ struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
+
+ videobuf_dma_unmap(dev, dma);
+ videobuf_dma_free(dma);
+ }
+
+ vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int omap1_videobuf_prepare(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ int ret;
+
+ if (bytes_per_line < 0)
+ return bytes_per_line;
+
+ WARN_ON(!list_empty(&vb->queue));
+
+ BUG_ON(NULL == icd->current_fmt);
+
+ buf->inwork = 1;
+
+ if (buf->code != icd->current_fmt->code || vb->field != field ||
+ vb->width != icd->user_width ||
+ vb->height != icd->user_height) {
+ buf->code = icd->current_fmt->code;
+ vb->width = icd->user_width;
+ vb->height = icd->user_height;
+ vb->field = field;
+ vb->state = VIDEOBUF_NEEDS_INIT;
+ }
+
+ vb->size = bytes_per_line * vb->height;
+
+ if (vb->baddr && vb->bsize < vb->size) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (vb->state == VIDEOBUF_NEEDS_INIT) {
+ ret = videobuf_iolock(vq, vb, NULL);
+ if (ret)
+ goto fail;
+
+ vb->state = VIDEOBUF_PREPARED;
+ }
+ buf->inwork = 0;
+
+ return 0;
+fail:
+ free_buffer(vq, buf, pcdev->vb_mode);
+out:
+ buf->inwork = 0;
+ return ret;
+}
+
+static void set_dma_dest_params(int dma_ch, struct omap1_cam_buf *buf,
+ enum omap1_cam_vb_mode vb_mode)
+{
+ dma_addr_t dma_addr;
+ unsigned int block_size;
+
+ if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ dma_addr = videobuf_to_dma_contig(&buf->vb);
+ block_size = buf->vb.size;
+ } else {
+ if (WARN_ON(!buf->sgbuf)) {
+ buf->result = VIDEOBUF_ERROR;
+ return;
+ }
+ dma_addr = sg_dma_address(buf->sgbuf);
+ if (WARN_ON(!dma_addr)) {
+ buf->sgbuf = NULL;
+ buf->result = VIDEOBUF_ERROR;
+ return;
+ }
+ block_size = sg_dma_len(buf->sgbuf);
+ if (WARN_ON(!block_size)) {
+ buf->sgbuf = NULL;
+ buf->result = VIDEOBUF_ERROR;
+ return;
+ }
+ if (unlikely(buf->bytes_left < block_size))
+ block_size = buf->bytes_left;
+ if (WARN_ON(dma_addr & (DMA_FRAME_SIZE(vb_mode) *
+ DMA_ELEMENT_SIZE - 1))) {
+ dma_addr = ALIGN(dma_addr, DMA_FRAME_SIZE(vb_mode) *
+ DMA_ELEMENT_SIZE);
+ block_size &= ~(DMA_FRAME_SIZE(vb_mode) *
+ DMA_ELEMENT_SIZE - 1);
+ }
+ buf->bytes_left -= block_size;
+ buf->sgcount++;
+ }
+
+ omap_set_dma_dest_params(dma_ch,
+ OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, dma_addr, 0, 0);
+ omap_set_dma_transfer_params(dma_ch,
+ OMAP_DMA_DATA_TYPE_S32, DMA_FRAME_SIZE(vb_mode),
+ block_size >> (DMA_FRAME_SHIFT(vb_mode) + DMA_ELEMENT_SHIFT),
+ DMA_SYNC, 0, 0);
+}
+
+static struct omap1_cam_buf *prepare_next_vb(struct omap1_cam_dev *pcdev)
+{
+ struct omap1_cam_buf *buf;
+
+ /*
+ * If there is already a buffer pointed out by the pcdev->ready,
+ * (re)use it, otherwise try to fetch and configure a new one.
+ */
+ buf = pcdev->ready;
+ if (!buf) {
+ if (list_empty(&pcdev->capture))
+ return buf;
+ buf = list_entry(pcdev->capture.next,
+ struct omap1_cam_buf, vb.queue);
+ buf->vb.state = VIDEOBUF_ACTIVE;
+ pcdev->ready = buf;
+ list_del_init(&buf->vb.queue);
+ }
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, we can safely enter next buffer parameters
+ * into the DMA programming register set after the DMA
+ * has already been activated on the previous buffer
+ */
+ set_dma_dest_params(pcdev->dma_ch, buf, pcdev->vb_mode);
+ } else {
+ /*
+ * In SG mode, the above is not safe since there are probably
+ * a bunch of sgbufs from previous sglist still pending.
+ * Instead, mark the sglist fresh for the upcoming
+ * try_next_sgbuf().
+ */
+ buf->sgbuf = NULL;
+ }
+
+ return buf;
+}
+
+static struct scatterlist *try_next_sgbuf(int dma_ch, struct omap1_cam_buf *buf)
+{
+ struct scatterlist *sgbuf;
+
+ if (likely(buf->sgbuf)) {
+ /* current sglist is active */
+ if (unlikely(!buf->bytes_left)) {
+ /* indicate sglist complete */
+ sgbuf = NULL;
+ } else {
+ /* process next sgbuf */
+ sgbuf = sg_next(buf->sgbuf);
+ if (WARN_ON(!sgbuf)) {
+ buf->result = VIDEOBUF_ERROR;
+ } else if (WARN_ON(!sg_dma_len(sgbuf))) {
+ sgbuf = NULL;
+ buf->result = VIDEOBUF_ERROR;
+ }
+ }
+ buf->sgbuf = sgbuf;
+ } else {
+ /* sglist is fresh, initialize it before using */
+ struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
+
+ sgbuf = dma->sglist;
+ if (!(WARN_ON(!sgbuf))) {
+ buf->sgbuf = sgbuf;
+ buf->sgcount = 0;
+ buf->bytes_left = buf->vb.size;
+ buf->result = VIDEOBUF_DONE;
+ }
+ }
+ if (sgbuf)
+ /*
+ * Put our next sgbuf parameters (address, size)
+ * into the DMA programming register set.
+ */
+ set_dma_dest_params(dma_ch, buf, OMAP1_CAM_DMA_SG);
+
+ return sgbuf;
+}
+
+static void start_capture(struct omap1_cam_dev *pcdev)
+{
+ struct omap1_cam_buf *buf = pcdev->active;
+ u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
+ u32 mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN;
+
+ if (WARN_ON(!buf))
+ return;
+
+ /*
+ * Enable start of frame interrupt, which we will use for activating
+ * our end of frame watchdog when capture actually starts.
+ */
+ mode |= EN_V_UP;
+
+ if (unlikely(ctrlclock & LCLK_EN))
+ /* stop pixel clock before FIFO reset */
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
+ /* reset FIFO */
+ CAM_WRITE(pcdev, MODE, mode | RAZ_FIFO);
+
+ omap_start_dma(pcdev->dma_ch);
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
+ /*
+ * In SG mode, it's a good moment for fetching next sgbuf
+ * from the current sglist and, if available, already putting
+ * its parameters into the DMA programming register set.
+ */
+ try_next_sgbuf(pcdev->dma_ch, buf);
+ }
+
+ /* (re)enable pixel clock */
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | LCLK_EN);
+ /* release FIFO reset */
+ CAM_WRITE(pcdev, MODE, mode);
+}
+
+static void suspend_capture(struct omap1_cam_dev *pcdev)
+{
+ u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
+
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
+ omap_stop_dma(pcdev->dma_ch);
+}
+
+static void disable_capture(struct omap1_cam_dev *pcdev)
+{
+ u32 mode = CAM_READ_CACHE(pcdev, MODE);
+
+ CAM_WRITE(pcdev, MODE, mode & ~(IRQ_MASK | DMA));
+}
+
+static void omap1_videobuf_queue(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ struct omap1_cam_buf *buf;
+ u32 mode;
+
+ list_add_tail(&vb->queue, &pcdev->capture);
+ vb->state = VIDEOBUF_QUEUED;
+
+ if (pcdev->active) {
+ /*
+ * Capture in progress, so don't touch pcdev->ready even if
+ * empty. Since the transfer of the DMA programming register set
+ * content to the DMA working register set is done automatically
+ * by the DMA hardware, this can pretty well happen while we
+ * are keeping the lock here. Levae fetching it from the queue
+ * to be done when a next DMA interrupt occures instead.
+ */
+ return;
+ }
+
+ WARN_ON(pcdev->ready);
+
+ buf = prepare_next_vb(pcdev);
+ if (WARN_ON(!buf))
+ return;
+
+ pcdev->active = buf;
+ pcdev->ready = NULL;
+
+ dev_dbg(icd->dev.parent,
+ "%s: capture not active, setup FIFO, start DMA\n", __func__);
+ mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
+ mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
+ CAM_WRITE(pcdev, MODE, mode | EN_FIFO_FULL | DMA);
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
+ /*
+ * In SG mode, the above prepare_next_vb() didn't actually
+ * put anything into the DMA programming register set,
+ * so we have to do it now, before activating DMA.
+ */
+ try_next_sgbuf(pcdev->dma_ch, buf);
+ }
+
+ start_capture(pcdev);
+}
+
+static void omap1_videobuf_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct omap1_cam_buf *buf =
+ container_of(vb, struct omap1_cam_buf, vb);
+ struct soc_camera_device *icd = vq->priv_data;
+ struct device *dev = icd->dev.parent;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+
+ switch (vb->state) {
+ case VIDEOBUF_DONE:
+ dev_dbg(dev, "%s (done)\n", __func__);
+ break;
+ case VIDEOBUF_ACTIVE:
+ dev_dbg(dev, "%s (active)\n", __func__);
+ break;
+ case VIDEOBUF_QUEUED:
+ dev_dbg(dev, "%s (queued)\n", __func__);
+ break;
+ case VIDEOBUF_PREPARED:
+ dev_dbg(dev, "%s (prepared)\n", __func__);
+ break;
+ default:
+ dev_dbg(dev, "%s (unknown %d)\n", __func__, vb->state);
+ break;
+ }
+
+ free_buffer(vq, buf, pcdev->vb_mode);
+}
+
+static void videobuf_done(struct omap1_cam_dev *pcdev,
+ enum videobuf_state result)
+{
+ struct omap1_cam_buf *buf = pcdev->active;
+ struct videobuf_buffer *vb;
+ struct device *dev = pcdev->icd->dev.parent;
+
+ if (WARN_ON(!buf)) {
+ suspend_capture(pcdev);
+ disable_capture(pcdev);
+ return;
+ }
+
+ if (result == VIDEOBUF_ERROR)
+ suspend_capture(pcdev);
+
+ vb = &buf->vb;
+ if (waitqueue_active(&vb->done)) {
+ if (!pcdev->ready && result != VIDEOBUF_ERROR) {
+ /*
+ * No next buffer has been entered into the DMA
+ * programming register set on time (could be done only
+ * while the previous DMA interurpt was processed, not
+ * later), so the last DMA block, be it a whole buffer
+ * if in CONTIG or its last sgbuf if in SG mode, is
+ * about to be reused by the just autoreinitialized DMA
+ * engine, and overwritten with next frame data. Best we
+ * can do is stopping the capture as soon as possible,
+ * hopefully before the next frame start.
+ */
+ suspend_capture(pcdev);
+ }
+ vb->state = result;
+ do_gettimeofday(&vb->ts);
+ if (result != VIDEOBUF_ERROR)
+ vb->field_count++;
+ wake_up(&vb->done);
+
+ /* shift in next buffer */
+ buf = pcdev->ready;
+ pcdev->active = buf;
+ pcdev->ready = NULL;
+
+ if (!buf) {
+ /*
+ * No next buffer was ready on time (see above), so
+ * indicate error condition to force capture restart or
+ * stop, depending on next buffer already queued or not.
+ */
+ result = VIDEOBUF_ERROR;
+ prepare_next_vb(pcdev);
+
+ buf = pcdev->ready;
+ pcdev->active = buf;
+ pcdev->ready = NULL;
+ }
+ } else if (pcdev->ready) {
+ /*
+ * In both CONTIG and SG mode, the DMA engine has possibly
+ * been already autoreinitialized with the preprogrammed
+ * pcdev->ready buffer. We can either accept this fact
+ * and just swap the buffers, or provoke an error condition
+ * and restart capture. The former seems less intrusive.
+ */
+ dev_dbg(dev, "%s: nobody waiting on videobuf, swap with next\n",
+ __func__);
+ pcdev->active = pcdev->ready;
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
+ /*
+ * In SG mode, we have to make sure that the buffer we
+ * are putting back into the pcdev->ready is marked
+ * fresh.
+ */
+ buf->sgbuf = NULL;
+ }
+ pcdev->ready = buf;
+
+ buf = pcdev->active;
+ } else {
+ /*
+ * No next buffer has been entered into
+ * the DMA programming register set on time.
+ */
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, the DMA engine has already been
+ * reinitialized with the current buffer. Best we can do
+ * is not touching it.
+ */
+ dev_dbg(dev,
+ "%s: nobody waiting on videobuf, reuse it\n",
+ __func__);
+ } else {
+ /*
+ * In SG mode, the DMA engine has just been
+ * autoreinitialized with the last sgbuf from the
+ * current list. Restart capture in order to transfer
+ * next frame start into the first sgbuf, not the last
+ * one.
+ */
+ if (result != VIDEOBUF_ERROR) {
+ suspend_capture(pcdev);
+ result = VIDEOBUF_ERROR;
+ }
+ }
+ }
+
+ if (!buf) {
+ dev_dbg(dev, "%s: no more videobufs, stop capture\n", __func__);
+ disable_capture(pcdev);
+ return;
+ }
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, the current buffer parameters had already
+ * been entered into the DMA programming register set while the
+ * buffer was fetched with prepare_next_vb(), they may have also
+ * been transfered into the runtime set and already active if
+ * the DMA still running.
+ */
+ } else {
+ /* In SG mode, extra steps are required */
+ if (result == VIDEOBUF_ERROR)
+ /* make sure we (re)use sglist from start on error */
+ buf->sgbuf = NULL;
+
+ /*
+ * In any case, enter the next sgbuf parameters into the DMA
+ * programming register set. They will be used either during
+ * nearest DMA autoreinitialization or, in case of an error,
+ * on DMA startup below.
+ */
+ try_next_sgbuf(pcdev->dma_ch, buf);
+ }
+
+ if (result == VIDEOBUF_ERROR) {
+ dev_dbg(dev, "%s: videobuf error; reset FIFO, restart DMA\n",
+ __func__);
+ start_capture(pcdev);
+ /*
+ * In SG mode, the above also resulted in the next sgbuf
+ * parameters being entered into the DMA programming register
+ * set, making them ready for next DMA autoreinitialization.
+ */
+ }
+
+ /*
+ * Finally, try fetching next buffer.
+ * In CONTIG mode, it will also enter it into the DMA programming
+ * register set, making it ready for next DMA autoreinitialization.
+ */
+ prepare_next_vb(pcdev);
+}
+
+static void dma_isr(int channel, unsigned short status, void *data)
+{
+ struct omap1_cam_dev *pcdev = data;
+ struct omap1_cam_buf *buf = pcdev->active;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ if (WARN_ON(!buf)) {
+ suspend_capture(pcdev);
+ disable_capture(pcdev);
+ goto out;
+ }
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, assume we have just managed to collect the
+ * whole frame, hopefully before our end of frame watchdog is
+ * triggered. Then, all we have to do is disabling the watchdog
+ * for this frame, and calling videobuf_done() with success
+ * indicated.
+ */
+ CAM_WRITE(pcdev, MODE,
+ CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN);
+ videobuf_done(pcdev, VIDEOBUF_DONE);
+ } else {
+ /*
+ * In SG mode, we have to process every sgbuf from the current
+ * sglist, one after another.
+ */
+ if (buf->sgbuf) {
+ /*
+ * Current sglist not completed yet, try fetching next
+ * sgbuf, hopefully putting it into the DMA programming
+ * register set, making it ready for next DMA
+ * autoreinitialization.
+ */
+ try_next_sgbuf(pcdev->dma_ch, buf);
+ if (buf->sgbuf)
+ goto out;
+
+ /*
+ * No more sgbufs left in the current sglist. This
+ * doesn't mean that the whole videobuffer is already
+ * complete, but only that the last sgbuf from the
+ * current sglist is about to be filled. It will be
+ * ready on next DMA interrupt, signalled with the
+ * buf->sgbuf set back to NULL.
+ */
+ if (buf->result != VIDEOBUF_ERROR) {
+ /*
+ * Video frame collected without errors so far,
+ * we can prepare for collecting a next one
+ * as soon as DMA gets autoreinitialized
+ * after the current (last) sgbuf is completed.
+ */
+ buf = prepare_next_vb(pcdev);
+ if (!buf)
+ goto out;
+
+ try_next_sgbuf(pcdev->dma_ch, buf);
+ goto out;
+ }
+ }
+ /* end of videobuf */
+ videobuf_done(pcdev, buf->result);
+ }
+
+out:
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static irqreturn_t cam_isr(int irq, void *data)
+{
+ struct omap1_cam_dev *pcdev = data;
+ struct device *dev = pcdev->icd->dev.parent;
+ struct omap1_cam_buf *buf = pcdev->active;
+ u32 it_status;
+ unsigned long flags;
+
+ it_status = CAM_READ(pcdev, IT_STATUS);
+ if (!it_status)
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ if (WARN_ON(!buf)) {
+ dev_warn(dev, "%s: unhandled camera interrupt, status == "
+ "%#x\n", __func__, it_status);
+ suspend_capture(pcdev);
+ disable_capture(pcdev);
+ goto out;
+ }
+
+ if (unlikely(it_status & FIFO_FULL)) {
+ dev_warn(dev, "%s: FIFO overflow\n", __func__);
+
+ } else if (it_status & V_DOWN) {
+ /* end of video frame watchdog */
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, the watchdog is disabled with
+ * successful DMA end of block interrupt, and reenabled
+ * on next frame start. If we get here, there is nothing
+ * to check, we must be out of sync.
+ */
+ } else {
+ if (buf->sgcount == 2) {
+ /*
+ * If exactly 2 sgbufs from the next sglist have
+ * been programmed into the DMA engine (the
+ * frist one already transfered into the DMA
+ * runtime register set, the second one still
+ * in the programming set), then we are in sync.
+ */
+ goto out;
+ }
+ }
+ dev_notice(dev, "%s: unexpected end of video frame\n",
+ __func__);
+
+ } else if (it_status & V_UP) {
+ u32 mode;
+
+ if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
+ /*
+ * In CONTIG mode, we need this interrupt every frame
+ * in oredr to reenable our end of frame watchdog.
+ */
+ mode = CAM_READ_CACHE(pcdev, MODE);
+ } else {
+ /*
+ * In SG mode, the below enabled end of frame watchdog
+ * is kept on permanently, so we can turn this one shot
+ * setup off.
+ */
+ mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_UP;
+ }
+
+ if (!(mode & EN_V_DOWN)) {
+ /* (re)enable end of frame watchdog interrupt */
+ mode |= EN_V_DOWN;
+ }
+ CAM_WRITE(pcdev, MODE, mode);
+ goto out;
+
+ } else {
+ dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n",
+ __func__, it_status);
+ goto out;
+ }
+
+ videobuf_done(pcdev, VIDEOBUF_ERROR);
+out:
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static struct videobuf_queue_ops omap1_videobuf_ops = {
+ .buf_setup = omap1_videobuf_setup,
+ .buf_prepare = omap1_videobuf_prepare,
+ .buf_queue = omap1_videobuf_queue,
+ .buf_release = omap1_videobuf_release,
+};
+
+
+/*
+ * SOC Camera host operations
+ */
+
+static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset)
+{
+ /* apply/release camera sensor reset if requested by platform data */
+ if (pcdev->pflags & OMAP1_CAMERA_RST_HIGH)
+ CAM_WRITE(pcdev, GPIO, reset);
+ else if (pcdev->pflags & OMAP1_CAMERA_RST_LOW)
+ CAM_WRITE(pcdev, GPIO, !reset);
+}
+
+/*
+ * The following two functions absolutely depend on the fact, that
+ * there can be only one camera on OMAP1 camera sensor interface
+ */
+static int omap1_cam_add_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ u32 ctrlclock;
+
+ if (pcdev->icd)
+ return -EBUSY;
+
+ clk_enable(pcdev->clk);
+
+ /* setup sensor clock */
+ ctrlclock = CAM_READ(pcdev, CTRLCLOCK);
+ ctrlclock &= ~(CAMEXCLK_EN | MCLK_EN | DPLL_EN);
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
+
+ ctrlclock &= ~FOSCMOD_MASK;
+ switch (pcdev->camexclk) {
+ case 6000000:
+ ctrlclock |= CAMEXCLK_EN | FOSCMOD_6MHz;
+ break;
+ case 8000000:
+ ctrlclock |= CAMEXCLK_EN | FOSCMOD_8MHz | DPLL_EN;
+ break;
+ case 9600000:
+ ctrlclock |= CAMEXCLK_EN | FOSCMOD_9_6MHz | DPLL_EN;
+ break;
+ case 12000000:
+ ctrlclock |= CAMEXCLK_EN | FOSCMOD_12MHz;
+ break;
+ case 24000000:
+ ctrlclock |= CAMEXCLK_EN | FOSCMOD_24MHz | DPLL_EN;
+ default:
+ break;
+ }
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~DPLL_EN);
+
+ /* enable internal clock */
+ ctrlclock |= MCLK_EN;
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
+
+ sensor_reset(pcdev, false);
+
+ pcdev->icd = icd;
+
+ dev_dbg(icd->dev.parent, "OMAP1 Camera driver attached to camera %d\n",
+ icd->devnum);
+ return 0;
+}
+
+static void omap1_cam_remove_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ u32 ctrlclock;
+
+ BUG_ON(icd != pcdev->icd);
+
+ suspend_capture(pcdev);
+ disable_capture(pcdev);
+
+ sensor_reset(pcdev, true);
+
+ /* disable and release system clocks */
+ ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
+ ctrlclock &= ~(MCLK_EN | DPLL_EN | CAMEXCLK_EN);
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
+
+ ctrlclock = (ctrlclock & ~FOSCMOD_MASK) | FOSCMOD_12MHz;
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | MCLK_EN);
+
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~MCLK_EN);
+
+ clk_disable(pcdev->clk);
+
+ pcdev->icd = NULL;
+
+ dev_dbg(icd->dev.parent,
+ "OMAP1 Camera driver detached from camera %d\n", icd->devnum);
+}
+
+/* Duplicate standard formats based on host capability of byte swapping */
+static const struct soc_mbus_pixelfmt omap1_cam_formats[] = {
+ [V4L2_MBUS_FMT_UYVY8_2X8] = {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .name = "YUYV",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_VYUY8_2X8] = {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .name = "YVYU",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_YUYV8_2X8] = {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .name = "UYVY",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_YVYU8_2X8] = {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .name = "VYUY",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE] = {
+ .fourcc = V4L2_PIX_FMT_RGB555,
+ .name = "RGB555",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE] = {
+ .fourcc = V4L2_PIX_FMT_RGB555X,
+ .name = "RGB555X",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_RGB565_2X8_BE] = {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .name = "RGB565",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+ [V4L2_MBUS_FMT_RGB565_2X8_LE] = {
+ .fourcc = V4L2_PIX_FMT_RGB565X,
+ .name = "RGB565X",
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
+ .order = SOC_MBUS_ORDER_BE,
+ },
+};
+
+static int omap1_cam_get_formats(struct soc_camera_device *icd,
+ unsigned int idx, struct soc_camera_format_xlate *xlate)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct device *dev = icd->dev.parent;
+ int formats = 0, ret;
+ enum v4l2_mbus_pixelcode code;
+ const struct soc_mbus_pixelfmt *fmt;
+
+ ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code);
+ if (ret < 0)
+ /* No more formats */
+ return 0;
+
+ fmt = soc_mbus_get_fmtdesc(code);
+ if (!fmt) {
+ dev_err(dev, "%s: invalid format code #%d: %d\n", __func__,
+ idx, code);
+ return 0;
+ }
+
+ /* Check support for the requested bits-per-sample */
+ if (fmt->bits_per_sample != 8)
+ return 0;
+
+ switch (code) {
+ case V4L2_MBUS_FMT_YUYV8_2X8:
+ case V4L2_MBUS_FMT_YVYU8_2X8:
+ case V4L2_MBUS_FMT_UYVY8_2X8:
+ case V4L2_MBUS_FMT_VYUY8_2X8:
+ case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
+ case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
+ case V4L2_MBUS_FMT_RGB565_2X8_BE:
+ case V4L2_MBUS_FMT_RGB565_2X8_LE:
+ formats++;
+ if (xlate) {
+ xlate->host_fmt = &omap1_cam_formats[code];
+ xlate->code = code;
+ xlate++;
+ dev_dbg(dev, "%s: providing format %s "
+ "as byte swapped code #%d\n", __func__,
+ omap1_cam_formats[code].name, code);
+ }
+ default:
+ if (xlate)
+ dev_dbg(dev, "%s: providing format %s "
+ "in pass-through mode\n", __func__,
+ fmt->name);
+ }
+ formats++;
+ if (xlate) {
+ xlate->host_fmt = fmt;
+ xlate->code = code;
+ xlate++;
+ }
+
+ return formats;
+}
+
+static bool is_dma_aligned(s32 bytes_per_line, unsigned int height,
+ enum omap1_cam_vb_mode vb_mode)
+{
+ int size = bytes_per_line * height;
+
+ return IS_ALIGNED(bytes_per_line, DMA_ELEMENT_SIZE) &&
+ IS_ALIGNED(size, DMA_FRAME_SIZE(vb_mode) * DMA_ELEMENT_SIZE);
+}
+
+static int dma_align(int *width, int *height,
+ const struct soc_mbus_pixelfmt *fmt,
+ enum omap1_cam_vb_mode vb_mode, bool enlarge)
+{
+ s32 bytes_per_line = soc_mbus_bytes_per_line(*width, fmt);
+
+ if (bytes_per_line < 0)
+ return bytes_per_line;
+
+ if (!is_dma_aligned(bytes_per_line, *height, vb_mode)) {
+ unsigned int pxalign = __fls(bytes_per_line / *width);
+ unsigned int salign = DMA_FRAME_SHIFT(vb_mode) +
+ DMA_ELEMENT_SHIFT - pxalign;
+ unsigned int incr = enlarge << salign;
+
+ v4l_bound_align_image(width, 1, *width + incr, 0,
+ height, 1, *height + incr, 0, salign);
+ return 0;
+ }
+ return 1;
+}
+
+#define subdev_call_with_sense(pcdev, dev, icd, sd, function, args...) \
+({ \
+ struct soc_camera_sense sense = { \
+ .master_clock = pcdev->camexclk, \
+ .pixel_clock_max = 0, \
+ }; \
+ int __ret; \
+ \
+ if (pcdev->pdata) \
+ sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000; \
+ icd->sense = &sense; \
+ __ret = v4l2_subdev_call(sd, video, function, ##args); \
+ icd->sense = NULL; \
+ \
+ if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) { \
+ if (sense.pixel_clock > sense.pixel_clock_max) { \
+ dev_err(dev, "%s: pixel clock %lu " \
+ "set by the camera too high!\n", \
+ __func__, sense.pixel_clock); \
+ __ret = -EINVAL; \
+ } \
+ } \
+ __ret; \
+})
+
+static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev,
+ struct soc_camera_device *icd, struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf,
+ const struct soc_camera_format_xlate *xlate)
+{
+ s32 bytes_per_line;
+ int ret = subdev_call_with_sense(pcdev, dev, icd, sd, s_mbus_fmt, mf);
+
+ if (ret < 0) {
+ dev_err(dev, "%s: s_mbus_fmt failed\n", __func__);
+ return ret;
+ }
+
+ if (mf->code != xlate->code) {
+ dev_err(dev, "%s: unexpected pixel code change\n", __func__);
+ return -EINVAL;
+ }
+
+ bytes_per_line = soc_mbus_bytes_per_line(mf->width, xlate->host_fmt);
+ if (bytes_per_line < 0) {
+ dev_err(dev, "%s: soc_mbus_bytes_per_line() failed\n",
+ __func__);
+ return bytes_per_line;
+ }
+
+ if (!is_dma_aligned(bytes_per_line, mf->height, pcdev->vb_mode)) {
+ dev_err(dev, "%s: resulting geometry %ux%u not DMA aligned\n",
+ __func__, mf->width, mf->height);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int omap1_cam_set_crop(struct soc_camera_device *icd,
+ struct v4l2_crop *crop)
+{
+ struct v4l2_rect *rect = &crop->c;
+ const struct soc_camera_format_xlate *xlate = icd->current_fmt;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ struct device *dev = icd->dev.parent;
+ struct v4l2_mbus_framefmt mf;
+ int ret;
+
+ ret = subdev_call_with_sense(pcdev, dev, icd, sd, s_crop, crop);
+ if (ret < 0) {
+ dev_warn(dev, "%s: failed to crop to %ux%u@%u:%u\n", __func__,
+ rect->width, rect->height, rect->left, rect->top);
+ return ret;
+ }
+
+ ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf);
+ if (ret < 0) {
+ dev_warn(dev, "%s: failed to fetch current format\n", __func__);
+ return ret;
+ }
+
+ ret = dma_align(&mf.width, &mf.height, xlate->host_fmt, pcdev->vb_mode,
+ false);
+ if (ret < 0) {
+ dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
+ __func__, mf.width, mf.height,
+ xlate->host_fmt->name);
+ return ret;
+ }
+
+ if (!ret) {
+ /* sensor returned geometry not DMA aligned, trying to fix */
+ ret = set_mbus_format(pcdev, dev, icd, sd, &mf, xlate);
+ if (ret < 0) {
+ dev_err(dev, "%s: failed to set format\n", __func__);
+ return ret;
+ }
+ }
+
+ icd->user_width = mf.width;
+ icd->user_height = mf.height;
+
+ return 0;
+}
+
+static int omap1_cam_set_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ const struct soc_camera_format_xlate *xlate;
+ struct device *dev = icd->dev.parent;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_mbus_framefmt mf;
+ int ret;
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+ if (!xlate) {
+ dev_warn(dev, "%s: format %#x not found\n", __func__,
+ pix->pixelformat);
+ return -EINVAL;
+ }
+
+ mf.width = pix->width;
+ mf.height = pix->height;
+ mf.field = pix->field;
+ mf.colorspace = pix->colorspace;
+ mf.code = xlate->code;
+
+ ret = dma_align(&mf.width, &mf.height, xlate->host_fmt, pcdev->vb_mode,
+ true);
+ if (ret < 0) {
+ dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
+ __func__, pix->width, pix->height,
+ xlate->host_fmt->name);
+ return ret;
+ }
+
+ ret = set_mbus_format(pcdev, dev, icd, sd, &mf, xlate);
+ if (ret < 0) {
+ dev_err(dev, "%s: failed to set format\n", __func__);
+ return ret;
+ }
+
+ pix->width = mf.width;
+ pix->height = mf.height;
+ pix->field = mf.field;
+ pix->colorspace = mf.colorspace;
+ icd->current_fmt = xlate;
+
+ return 0;
+}
+
+static int omap1_cam_try_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ const struct soc_camera_format_xlate *xlate;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct v4l2_mbus_framefmt mf;
+ int ret;
+ /* TODO: limit to mx1 hardware capabilities */
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+ if (!xlate) {
+ dev_warn(icd->dev.parent, "Format %#x not found\n",
+ pix->pixelformat);
+ return -EINVAL;
+ }
+
+ mf.width = pix->width;
+ mf.height = pix->height;
+ mf.field = pix->field;
+ mf.colorspace = pix->colorspace;
+ mf.code = xlate->code;
+
+ /* limit to sensor capabilities */
+ ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+ if (ret < 0)
+ return ret;
+
+ pix->width = mf.width;
+ pix->height = mf.height;
+ pix->field = mf.field;
+ pix->colorspace = mf.colorspace;
+
+ return 0;
+}
+
+static bool sg_mode;
+
+/*
+ * Local mmap_mapper wrapper,
+ * used for detecting videobuf-dma-contig buffer allocation failures
+ * and switching to videobuf-dma-sg automatically for future attempts.
+ */
+static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
+ struct videobuf_buffer *buf,
+ struct vm_area_struct *vma)
+{
+ struct soc_camera_device *icd = q->priv_data;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ int ret;
+
+ ret = pcdev->mmap_mapper(q, buf, vma);
+
+ if (ret == -ENOMEM)
+ sg_mode = true;
+
+ return ret;
+}
+
+static void omap1_cam_init_videobuf(struct videobuf_queue *q,
+ struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+
+ if (!sg_mode)
+ videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
+ icd->dev.parent, &pcdev->lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
+ sizeof(struct omap1_cam_buf), icd);
+ else
+ videobuf_queue_sg_init(q, &omap1_videobuf_ops,
+ icd->dev.parent, &pcdev->lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
+ sizeof(struct omap1_cam_buf), icd);
+
+ /* use videobuf mode (auto)selected with the module parameter */
+ pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
+
+ /*
+ * Ensure we substitute the videobuf-dma-contig version of the
+ * mmap_mapper() callback with our own wrapper, used for switching
+ * automatically to videobuf-dma-sg on buffer allocation failure.
+ */
+ if (!sg_mode && q->int_ops->mmap_mapper != omap1_cam_mmap_mapper) {
+ pcdev->mmap_mapper = q->int_ops->mmap_mapper;
+ q->int_ops->mmap_mapper = omap1_cam_mmap_mapper;
+ }
+}
+
+static int omap1_cam_reqbufs(struct soc_camera_file *icf,
+ struct v4l2_requestbuffers *p)
+{
+ int i;
+
+ /*
+ * This is for locking debugging only. I removed spinlocks and now I
+ * check whether .prepare is ever called on a linked buffer, or whether
+ * a dma IRQ can occur for an in-work or unlinked buffer. Until now
+ * it hadn't triggered
+ */
+ for (i = 0; i < p->count; i++) {
+ struct omap1_cam_buf *buf = container_of(icf->vb_vidq.bufs[i],
+ struct omap1_cam_buf, vb);
+ buf->inwork = 0;
+ INIT_LIST_HEAD(&buf->vb.queue);
+ }
+
+ return 0;
+}
+
+static int omap1_cam_querycap(struct soc_camera_host *ici,
+ struct v4l2_capability *cap)
+{
+ /* cap->name is set by the friendly caller:-> */
+ strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card));
+ cap->version = VERSION_CODE;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+
+ return 0;
+}
+
+static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
+ __u32 pixfmt)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct omap1_cam_dev *pcdev = ici->priv;
+ struct device *dev = icd->dev.parent;
+ const struct soc_camera_format_xlate *xlate;
+ const struct soc_mbus_pixelfmt *fmt;
+ unsigned long camera_flags, common_flags;
+ u32 ctrlclock, mode;
+ int ret;
+
+ camera_flags = icd->ops->query_bus_param(icd);
+
+ common_flags = soc_camera_bus_param_compatible(camera_flags,
+ SOCAM_BUS_FLAGS);
+ if (!common_flags)
+ return -EINVAL;
+
+ /* Make choices, possibly based on platform configuration */
+ if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+ (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if (!pcdev->pdata ||
+ pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
+ common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ else
+ common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ }
+
+ ret = icd->ops->set_bus_param(icd, common_flags);
+ if (ret < 0)
+ return ret;
+
+ ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
+ if (ctrlclock & LCLK_EN)
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
+
+ if (common_flags & SOCAM_PCLK_SAMPLE_RISING) {
+ dev_dbg(dev, "CTRLCLOCK_REG |= POLCLK\n");
+ ctrlclock |= POLCLK;
+ } else {
+ dev_dbg(dev, "CTRLCLOCK_REG &= ~POLCLK\n");
+ ctrlclock &= ~POLCLK;
+ }
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
+
+ if (ctrlclock & LCLK_EN)
+ CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
+
+ /* select bus endianess */
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ fmt = xlate->host_fmt;
+
+ mode = CAM_READ(pcdev, MODE) & ~(RAZ_FIFO | IRQ_MASK | DMA);
+ if (fmt->order == SOC_MBUS_ORDER_LE) {
+ dev_dbg(dev, "MODE_REG &= ~ORDERCAMD\n");
+ CAM_WRITE(pcdev, MODE, mode & ~ORDERCAMD);
+ } else {
+ dev_dbg(dev, "MODE_REG |= ORDERCAMD\n");
+ CAM_WRITE(pcdev, MODE, mode | ORDERCAMD);
+ }
+
+ return 0;
+}
+
+static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
+{
+ struct soc_camera_file *icf = file->private_data;
+ struct omap1_cam_buf *buf;
+
+ buf = list_entry(icf->vb_vidq.stream.next, struct omap1_cam_buf,
+ vb.stream);
+
+ poll_wait(file, &buf->vb.done, pt);
+
+ if (buf->vb.state == VIDEOBUF_DONE ||
+ buf->vb.state == VIDEOBUF_ERROR)
+ return POLLIN | POLLRDNORM;
+
+ return 0;
+}
+
+static struct soc_camera_host_ops omap1_host_ops = {
+ .owner = THIS_MODULE,
+ .add = omap1_cam_add_device,
+ .remove = omap1_cam_remove_device,
+ .get_formats = omap1_cam_get_formats,
+ .set_crop = omap1_cam_set_crop,
+ .set_fmt = omap1_cam_set_fmt,
+ .try_fmt = omap1_cam_try_fmt,
+ .init_videobuf = omap1_cam_init_videobuf,
+ .reqbufs = omap1_cam_reqbufs,
+ .querycap = omap1_cam_querycap,
+ .set_bus_param = omap1_cam_set_bus_param,
+ .poll = omap1_cam_poll,
+};
+
+static int __init omap1_cam_probe(struct platform_device *pdev)
+{
+ struct omap1_cam_dev *pcdev;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *base;
+ unsigned int irq;
+ int err = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || (int)irq <= 0) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ clk = clk_get(&pdev->dev, "armper_ck");
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ goto exit;
+ }
+
+ pcdev = kzalloc(sizeof(*pcdev) + resource_size(res), GFP_KERNEL);
+ if (!pcdev) {
+ dev_err(&pdev->dev, "Could not allocate pcdev\n");
+ err = -ENOMEM;
+ goto exit_put_clk;
+ }
+
+ pcdev->res = res;
+ pcdev->clk = clk;
+
+ pcdev->pdata = pdev->dev.platform_data;
+ pcdev->pflags = pcdev->pdata->flags;
+
+ if (pcdev->pdata)
+ pcdev->camexclk = pcdev->pdata->camexclk_khz * 1000;
+
+ switch (pcdev->camexclk) {
+ case 6000000:
+ case 8000000:
+ case 9600000:
+ case 12000000:
+ case 24000000:
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "Incorrect sensor clock frequency %ld kHz, "
+ "should be one of 0, 6, 8, 9.6, 12 or 24 MHz, "
+ "please correct your platform data\n",
+ pcdev->pdata->camexclk_khz);
+ pcdev->camexclk = 0;
+ case 0:
+ dev_info(&pdev->dev,
+ "Not providing sensor clock\n");
+ }
+
+ INIT_LIST_HEAD(&pcdev->capture);
+ spin_lock_init(&pcdev->lock);
+
+ /*
+ * Request the region.
+ */
+ if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
+ err = -EBUSY;
+ goto exit_kfree;
+ }
+
+ base = ioremap(res->start, resource_size(res));
+ if (!base) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+ pcdev->irq = irq;
+ pcdev->base = base;
+
+ sensor_reset(pcdev, true);
+
+ err = omap_request_dma(OMAP_DMA_CAMERA_IF_RX, DRIVER_NAME,
+ dma_isr, (void *)pcdev, &pcdev->dma_ch);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Can't request DMA for OMAP1 Camera\n");
+ err = -EBUSY;
+ goto exit_iounmap;
+ }
+ dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_ch);
+
+ /* preconfigure DMA */
+ omap_set_dma_src_params(pcdev->dma_ch, OMAP_DMA_PORT_TIPB,
+ OMAP_DMA_AMODE_CONSTANT, res->start + REG_CAMDATA,
+ 0, 0);
+ omap_set_dma_dest_burst_mode(pcdev->dma_ch, OMAP_DMA_DATA_BURST_4);
+ /* setup DMA autoinitialization */
+ omap_dma_link_lch(pcdev->dma_ch, pcdev->dma_ch);
+
+ err = request_irq(pcdev->irq, cam_isr, 0, DRIVER_NAME, pcdev);
+ if (err) {
+ dev_err(&pdev->dev, "Camera interrupt register failed\n");
+ goto exit_free_dma;
+ }
+
+ pcdev->soc_host.drv_name = DRIVER_NAME;
+ pcdev->soc_host.ops = &omap1_host_ops;
+ pcdev->soc_host.priv = pcdev;
+ pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
+ pcdev->soc_host.nr = pdev->id;
+
+ err = soc_camera_host_register(&pcdev->soc_host);
+ if (err)
+ goto exit_free_irq;
+
+ dev_info(&pdev->dev, "OMAP1 Camera Interface driver loaded\n");
+
+ return 0;
+
+exit_free_irq:
+ free_irq(pcdev->irq, pcdev);
+exit_free_dma:
+ omap_free_dma(pcdev->dma_ch);
+exit_iounmap:
+ iounmap(base);
+exit_release:
+ release_mem_region(res->start, resource_size(res));
+exit_kfree:
+ kfree(pcdev);
+exit_put_clk:
+ clk_put(clk);
+exit:
+ return err;
+}
+
+static int __exit omap1_cam_remove(struct platform_device *pdev)
+{
+ struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+ struct omap1_cam_dev *pcdev = container_of(soc_host,
+ struct omap1_cam_dev, soc_host);
+ struct resource *res;
+
+ free_irq(pcdev->irq, pcdev);
+
+ omap_free_dma(pcdev->dma_ch);
+
+ soc_camera_host_unregister(soc_host);
+
+ iounmap(pcdev->base);
+
+ res = pcdev->res;
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(pcdev);
+
+ clk_put(pcdev->clk);
+
+ dev_info(&pdev->dev, "OMAP1 Camera Interface driver unloaded\n");
+
+ return 0;
+}
+
+static struct platform_driver omap1_cam_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+ .probe = omap1_cam_probe,
+ .remove = __exit_p(omap1_cam_remove),
+};
+
+static int __init omap1_cam_init(void)
+{
+ return platform_driver_register(&omap1_cam_driver);
+}
+module_init(omap1_cam_init);
+
+static void __exit omap1_cam_exit(void)
+{
+ platform_driver_unregister(&omap1_cam_driver);
+}
+module_exit(omap1_cam_exit);
+
+module_param(sg_mode, bool, 0644);
+MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
+
+MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
+MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
OpenPOWER on IntegriCloud