diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 80 |
1 files changed, 73 insertions, 7 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 2510000..ecbcefb 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -232,6 +232,12 @@ static struct em28xx_reg_seq vc211a_enable[] = { { -1, -1, -1, -1}, }; +static struct em28xx_reg_seq dikom_dk300_digital[] = { + {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x08, 0xff, 10}, + { -1, -1, -1, -1}, +}; + /* * Board definitions @@ -461,21 +467,30 @@ struct em28xx_board em28xx_boards[] = { .name = "Leadtek Winfast USB II Deluxe", .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, - .tda9887_conf = TDA9887_PRESENT, + .has_ir_i2c = 1, + .tvaudio_addr = 0x58, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT2_ACTIVE | + TDA9887_QSS, .decoder = EM28XX_SAA711X, + .adecoder = EM28XX_TVAUDIO, .input = { { .type = EM28XX_VMUX_TELEVISION, - .vmux = SAA7115_COMPOSITE2, - .amux = EM28XX_AMUX_VIDEO, + .vmux = SAA7115_COMPOSITE4, + .amux = EM28XX_AMUX_AUX, }, { .type = EM28XX_VMUX_COMPOSITE1, - .vmux = SAA7115_COMPOSITE0, + .vmux = SAA7115_COMPOSITE5, .amux = EM28XX_AMUX_LINE_IN, }, { .type = EM28XX_VMUX_SVIDEO, - .vmux = SAA7115_COMPOSITE0, + .vmux = SAA7115_SVIDEO3, .amux = EM28XX_AMUX_LINE_IN, } }, + .radio = { + .type = EM28XX_RADIO, + .amux = EM28XX_AMUX_AUX, + } }, [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { .name = "Videology 20K14XUSB USB2.0", @@ -730,11 +745,12 @@ struct em28xx_board em28xx_boards[] = { [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { .name = "Terratec Hybrid XS Secam", - .valid = EM28XX_BOARD_NOT_VALIDATED, .has_msp34xx = 1, .tuner_type = TUNER_XC2028, .tuner_gpio = default_tuner_gpio, .decoder = EM28XX_TVP5150, + .has_dvb = 1, + .dvb_gpio = default_digital, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -1265,6 +1281,7 @@ struct em28xx_board em28xx_boards[] = { .decoder = EM28XX_SAA711X, .has_dvb = 1, .dvb_gpio = em2882_kworld_315u_digital, + .ir_codes = &ir_codes_kworld_315u_table, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, /* Analog mode - still not ready */ @@ -1431,6 +1448,21 @@ struct em28xx_board em28xx_boards[] = { .gpio = hauppauge_wintv_hvr_900_analog, } }, }, + [EM2882_BOARD_DIKOM_DK300] = { + .name = "Dikom DK300", + .tuner_type = TUNER_XC2028, + .tuner_gpio = default_tuner_gpio, + .decoder = EM28XX_TVP5150, + .mts_firmware = 1, + .has_dvb = 1, + .dvb_gpio = dikom_dk300_digital, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = EM28XX_AMUX_VIDEO, + .gpio = default_analog, + } }, + }, [EM2883_BOARD_KWORLD_HYBRID_330U] = { .name = "Kworld PlusTV HD Hybrid 330", .tuner_type = TUNER_XC2028, @@ -1751,6 +1783,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = { {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, + {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, }; /* I2C devicelist hash table for devices with generic USB IDs */ @@ -2103,6 +2136,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) ctl->demod = XC3028_FE_DEFAULT; break; case EM2883_BOARD_KWORLD_HYBRID_330U: + case EM2882_BOARD_DIKOM_DK300: ctl->demod = XC3028_FE_CHINA; ctl->fname = XC2028_DEFAULT_FIRMWARE; break; @@ -2259,9 +2293,12 @@ static int em28xx_hint_board(struct em28xx *dev) /* ----------------------------------------------------------------------- */ void em28xx_register_i2c_ir(struct em28xx *dev) { + /* Leadtek winfast tv USBII deluxe can find a non working IR-device */ + /* at address 0x18, so if that address is needed for another board in */ + /* the future, please put it after 0x1f. */ struct i2c_board_info info; const unsigned short addr_list[] = { - 0x30, 0x47, I2C_CLIENT_END + 0x1f, 0x30, 0x47, I2C_CLIENT_END }; if (disable_ir) @@ -2288,6 +2325,10 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.ir_codes = &ir_codes_rc5_hauppauge_new_table; dev->init_data.get_key = em28xx_get_key_em_haup; dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; + case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE: + dev->init_data.ir_codes = &ir_codes_winfast_usbii_deluxe_table;; + dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe; + dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)"; break; } @@ -2381,6 +2422,31 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; + +/* + * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. + * + * This occurs because they share identical USB vendor and + * product IDs. + * + * What we do here is look up the EEPROM hash of the Dikom + * and if it is found then we decide that we do not have + * a Kworld and reset the device to the Dikom instead. + * + * This solution is only valid if they do not share eeprom + * hash identities which has not been determined as yet. + */ + case EM2882_BOARD_KWORLD_VS_DVBT: + if (!em28xx_hint_board(dev)) + em28xx_set_model(dev); + + /* In cases where we had to use a board hint, the call to + em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, + so make the call now so the analog GPIOs are set properly + before probing the i2c bus. */ + em28xx_gpio_set(dev, dev->board.tuner_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + break; } #if defined(CONFIG_MODULES) && defined(MODULE) |
