diff options
Diffstat (limited to 'drivers/media/video/au0828')
| -rw-r--r-- | drivers/media/video/au0828/Makefile | 2 | ||||
| -rw-r--r-- | drivers/media/video/au0828/au0828-cards.c | 41 | ||||
| -rw-r--r-- | drivers/media/video/au0828/au0828-core.c | 33 | ||||
| -rw-r--r-- | drivers/media/video/au0828/au0828-reg.h | 6 | ||||
| -rw-r--r-- | drivers/media/video/au0828/au0828-video.c | 1677 | ||||
| -rw-r--r-- | drivers/media/video/au0828/au0828.h | 174 |
6 files changed, 1920 insertions, 13 deletions
diff --git a/drivers/media/video/au0828/Makefile b/drivers/media/video/au0828/Makefile index cd2c582..4d26231 100644 --- a/drivers/media/video/au0828/Makefile +++ b/drivers/media/video/au0828/Makefile @@ -1,4 +1,4 @@ -au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o +au0828-objs := au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o obj-$(CONFIG_VIDEO_AU0828) += au0828.o diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index d60123b..aa79e6b 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -21,6 +21,18 @@ #include "au0828.h" #include "au0828-cards.h" +#include "au8522.h" + +void hvr950q_cs5340_audio(void *priv, int enable) +{ + /* Because the HVR-950q shares an i2s bus between the cs5340 and the + au8522, we need to hold cs5340 in reset when using the au8522 */ + struct au0828_dev *dev = priv; + if (enable == 1) + au0828_set(dev, REG_000, 0x10); + else + au0828_clear(dev, REG_000, 0x10); +} struct au0828_board au0828_boards[] = { [AU0828_BOARD_UNKNOWN] = { @@ -31,6 +43,25 @@ struct au0828_board au0828_boards[] = { }, [AU0828_BOARD_HAUPPAUGE_HVR950Q] = { .name = "Hauppauge HVR950Q", + .input = { + { + .type = AU0828_VMUX_TELEVISION, + .vmux = AU8522_COMPOSITE_CH4_SIF, + .amux = AU8522_AUDIO_SIF, + }, + { + .type = AU0828_VMUX_COMPOSITE, + .vmux = AU8522_COMPOSITE_CH1, + .amux = AU8522_AUDIO_NONE, + .audio_setup = hvr950q_cs5340_audio, + }, + { + .type = AU0828_VMUX_SVIDEO, + .vmux = AU8522_SVIDEO_CH13, + .amux = AU8522_AUDIO_NONE, + .audio_setup = hvr950q_cs5340_audio, + }, + }, }, [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = { .name = "Hauppauge HVR950Q rev xxF8", @@ -144,21 +175,23 @@ void au0828_gpio_setup(struct au0828_dev *dev) * 4 - CS5340 * 5 - AU8522 Demodulator * 6 - eeprom W/P + * 7 - power supply * 9 - XC5000 Tuner */ /* Into reset */ au0828_write(dev, REG_003, 0x02); - au0828_write(dev, REG_002, 0x88 | 0x20); + au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10); au0828_write(dev, REG_001, 0x0); au0828_write(dev, REG_000, 0x0); msleep(100); - /* Out of reset */ + /* Out of reset (leave the cs5340 in reset until needed) */ au0828_write(dev, REG_003, 0x02); au0828_write(dev, REG_001, 0x02); - au0828_write(dev, REG_002, 0x88 | 0x20); - au0828_write(dev, REG_000, 0x88 | 0x20 | 0x40); + au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10); + au0828_write(dev, REG_000, 0x80 | 0x40 | 0x20); + msleep(250); break; case AU0828_BOARD_DVICO_FUSIONHDTV7: diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index 5765e86..680e88f6 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -146,6 +146,8 @@ static void au0828_usb_disconnect(struct usb_interface *interface) /* Digital TV */ au0828_dvb_unregister(dev); + au0828_analog_unregister(dev); + /* I2C */ au0828_i2c_unregister(dev); @@ -162,9 +164,11 @@ static void au0828_usb_disconnect(struct usb_interface *interface) static int au0828_usb_probe(struct usb_interface *interface, const struct usb_device_id *id) { - int ifnum; + int ifnum, i; struct au0828_dev *dev; struct usb_device *usbdev = interface_to_usbdev(interface); + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; ifnum = interface->altsetting->desc.bInterfaceNumber; @@ -189,6 +193,30 @@ static int au0828_usb_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); + /* set au0828 usb interface0 to as5 */ + usb_set_interface(usbdev, + interface->cur_altsetting->desc.bInterfaceNumber, 5); + + /* Figure out which endpoint has the isoc interface */ + iface_desc = interface->cur_altsetting; + for(i = 0; i < iface_desc->desc.bNumEndpoints; i++){ + endpoint = &iface_desc->endpoint[i].desc; + if(((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)){ + + /* we find our isoc in endpoint */ + u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize); + dev->max_pkt_size = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); + dev->isoc_in_endpointaddr = endpoint->bEndpointAddress; + } + } + if(!(dev->isoc_in_endpointaddr)) { + printk("Could not locate isoc endpoint\n"); + kfree(dev); + return -ENODEV; + } + + /* Power Up the bridge */ au0828_write(dev, REG_600, 1 << 4); @@ -201,6 +229,9 @@ static int au0828_usb_probe(struct usb_interface *interface, /* Setup */ au0828_card_setup(dev); + /* Analog TV */ + au0828_analog_register(dev); + /* Digital TV */ au0828_dvb_register(dev); diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h index 1e87fa0c6..b15e4a3 100644 --- a/drivers/media/video/au0828/au0828-reg.h +++ b/drivers/media/video/au0828/au0828-reg.h @@ -27,6 +27,9 @@ #define REG_002 0x002 #define REG_003 0x003 +#define AU0828_SENSORCTRL_100 0x100 +#define AU0828_SENSORCTRL_VBI_103 0x103 + #define REG_200 0x200 #define REG_201 0x201 #define REG_202 0x202 @@ -35,4 +38,7 @@ #define REG_209 0x209 #define REG_2FF 0x2ff +/* Audio registers */ +#define AU0828_AUDIOCTRL_50C 0x50C + #define REG_600 0x600 diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c new file mode 100644 index 0000000..e34464f --- /dev/null +++ b/drivers/media/video/au0828/au0828-video.c @@ -0,0 +1,1677 @@ +/* + * Auvitek AU0828 USB Bridge (Analog video support) + * + * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> + * Copyright (C) 2005-2008 Auvitek International, Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * As published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +/* Developer Notes: + * + * VBI support is not yet working + * The hardware scaler supported is unimplemented + * AC97 audio support is unimplemented (only i2s audio mode) + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/suspend.h> +#include <linux/version.h> +#include <linux/videodev.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-chip-ident.h> +#include <media/tuner.h> +#include "au0828.h" +#include "au0828-reg.h" + +static LIST_HEAD(au0828_devlist); +static DEFINE_MUTEX(au0828_sysfs_lock); + +#define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1) + +/* Forward declarations */ +void au0828_analog_stream_reset(struct au0828_dev *dev); + +/* ------------------------------------------------------------------ + Videobuf operations + ------------------------------------------------------------------*/ + +static unsigned int isoc_debug; +module_param(isoc_debug, int, 0644); +MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); + +#define au0828_isocdbg(fmt, arg...) \ +do {\ + if (isoc_debug) { \ + printk(KERN_INFO "au0828 %s :"fmt, \ + __func__ , ##arg); \ + } \ + } while (0) + +static inline void print_err_status(struct au0828_dev *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronuously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronuously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet < 0) { + au0828_isocdbg("URB status %d [%s].\n", status, errmsg); + } else { + au0828_isocdbg("URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + +static int check_dev(struct au0828_dev *dev) +{ + if (dev->dev_state & DEV_DISCONNECTED) { + printk("v4l2 ioctl: device not present\n"); + return -ENODEV; + } + + if (dev->dev_state & DEV_MISCONFIGURED) { + printk("v4l2 ioctl: device is misconfigured; " + "close and open it again\n"); + return -EIO; + } + return 0; +} + +/* + * IRQ callback, called by URB callback + */ +static void au0828_irq_callback(struct urb *urb) +{ + struct au0828_dmaqueue *dma_q = urb->context; + struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); + int rc, i; + + switch (urb->status) { + case 0: /* success */ + case -ETIMEDOUT: /* NAK */ + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + au0828_isocdbg("au0828_irq_callback called: status kill\n"); + return; + default: /* unknown error */ + au0828_isocdbg("urb completition error %d.\n", urb->status); + break; + } + + /* Copy data from URB */ + spin_lock(&dev->slock); + rc = dev->isoc_ctl.isoc_copy(dev, urb); + spin_unlock(&dev->slock); + + /* Reset urb buffers */ + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + urb->status = 0; + + urb->status = usb_submit_urb(urb, GFP_ATOMIC); + if (urb->status) { + au0828_isocdbg("urb resubmit failed (error=%i)\n", + urb->status); + } +} + +/* + * Stop and Deallocate URBs + */ +void au0828_uninit_isoc(struct au0828_dev *dev) +{ + struct urb *urb; + int i; + + au0828_isocdbg("au0828: called au0828_uninit_isoc\n"); + + dev->isoc_ctl.nfields = -1; + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = dev->isoc_ctl.urb[i]; + if (urb) { + if (!irqs_disabled()) + usb_kill_urb(urb); + else + usb_unlink_urb(urb); + + if (dev->isoc_ctl.transfer_buffer[i]) { + usb_buffer_free(dev->usbdev, + urb->transfer_buffer_length, + dev->isoc_ctl.transfer_buffer[i], + urb->transfer_dma); + } + usb_free_urb(urb); + dev->isoc_ctl.urb[i] = NULL; + } + dev->isoc_ctl.transfer_buffer[i] = NULL; + } + + kfree(dev->isoc_ctl.urb); + kfree(dev->isoc_ctl.transfer_buffer); + + dev->isoc_ctl.urb = NULL; + dev->isoc_ctl.transfer_buffer = NULL; + dev->isoc_ctl.num_bufs = 0; +} + +/* + * Allocate URBs and start IRQ + */ +int au0828_init_isoc(struct au0828_dev *dev, int max_packets, + int num_bufs, int max_pkt_size, + int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb)) +{ + struct au0828_dmaqueue *dma_q = &dev->vidq; + int i; + int sb_size, pipe; + struct urb *urb; + int j, k; + int rc; + + au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); + + /* De-allocates all pending stuff */ + au0828_uninit_isoc(dev); + + dev->isoc_ctl.isoc_copy = isoc_copy; + dev->isoc_ctl.num_bufs = num_bufs; + + dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); + if (!dev->isoc_ctl.urb) { + au0828_isocdbg("cannot alloc memory for usb buffers\n"); + return -ENOMEM; + } + + dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, + GFP_KERNEL); + if (!dev->isoc_ctl.transfer_buffer) { + au0828_isocdbg("cannot allocate memory for usb transfer\n"); + kfree(dev->isoc_ctl.urb); + return -ENOMEM; + } + + dev->isoc_ctl.max_pkt_size = max_pkt_size; + dev->isoc_ctl.buf = NULL; + + sb_size = max_packets * dev->isoc_ctl.max_pkt_size; + + /* allocate urbs and transfer buffers */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = usb_alloc_urb(max_packets, GFP_KERNEL); + if (!urb) { + au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); + au0828_uninit_isoc(dev); + return -ENOMEM; + } + dev->isoc_ctl.urb[i] = urb; + + dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->usbdev, + sb_size, GFP_KERNEL, &urb->transfer_dma); + if (!dev->isoc_ctl.transfer_buffer[i]) { + printk("unable to allocate %i bytes for transfer" + " buffer %i%s\n", + sb_size, i, + in_interrupt() ? " while in int" : ""); + au0828_uninit_isoc(dev); + return -ENOMEM; + } + memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); + + pipe = usb_rcvisocpipe(dev->usbdev, + dev->isoc_in_endpointaddr), + + usb_fill_int_urb(urb, dev->usbdev, pipe, + dev->isoc_ctl.transfer_buffer[i], sb_size, + au0828_irq_callback, dma_q, 1); + + urb->number_of_packets = max_packets; + urb->transfer_flags = URB_ISO_ASAP; + + k = 0; + for (j = 0; j < max_packets; j++) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + dev->isoc_ctl.max_pkt_size; + k += dev->isoc_ctl.max_pkt_size; + } + } + + init_waitqueue_head(&dma_q->wq); + + /* submit urbs and enables IRQ */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + if (rc) { + au0828_isocdbg("submit of urb %i failed (error=%i)\n", + i, rc); + au0828_uninit_isoc(dev); + return rc; + } + } + + return 0; +} + +/* + * Announces that a buffer were filled and request the next + */ +static inline void buffer_filled(struct au0828_dev *dev, + struct au0828_dmaqueue *dma_q, + struct au0828_buffer *buf) +{ + /* Advice that buffer was filled */ + au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); + + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + do_gettimeofday(&buf->vb.ts); + + dev->isoc_ctl.buf = NULL; + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + +/* + * Identify the buffer header type and properly handles + */ +static void au0828_copy_video(struct au0828_dev *dev, + struct au0828_dmaqueue *dma_q, + struct au0828_buffer *buf, + unsigned char *p, + unsigned char *outp, unsigned long len) +{ + void *fieldstart, *startwrite, *startread; + int linesdone, currlinedone, offset, lencopy, remain; + int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ + + if (dma_q->pos + len > buf->vb.size) + len = buf->vb.size - dma_q->pos; + + startread = p; + remain = len; + + /* Interlaces frame */ + if (buf->top_field) + fieldstart = outp; + else + fieldstart = outp + bytesperline; + + linesdone = dma_q->pos / bytesperline; + currlinedone = dma_q->pos % bytesperline; + offset = linesdone * bytesperline * 2 + currlinedone; + startwrite = fieldstart + offset; + lencopy = bytesperline - currlinedone; + lencopy = lencopy > remain ? remain : lencopy; + + if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { + au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", + ((char *)startwrite + lencopy) - + ((char *)outp + buf->vb.size)); + remain = (char *)outp + buf->vb.size - (char *)startwrite; + lencopy = remain; + } + if (lencopy <= 0) + return; + memcpy(startwrite, startread, lencopy); + + remain -= lencopy; + + while (remain > 0) { + startwrite += lencopy + bytesperline; + startread += lencopy; + if (bytesperline > remain) + lencopy = remain; + else + lencopy = bytesperline; + + if ((char *)startwrite + lencopy > (char *)outp + + buf->vb.size) { + au0828_isocdbg("Overflow of %zi bytes past buffer end (2)\n", + ((char *)startwrite + lencopy) - + ((char *)outp + buf->vb.size)); + lencopy = remain = (char *)outp + buf->vb.size - + (char *)startwrite; + } + if (lencopy <= 0) + break; + + memcpy(startwrite, startread, lencopy); + + remain -= lencopy; + } + + if (offset > 1440) { + /* We have enough data to check for greenscreen */ + if (outp[0] < 0x60 && outp[1440] < 0x60) { + dev->greenscreen_detected = 1; + } + } + + dma_q->pos += len; +} + +/* + * video-buf generic routine to get the next available buffer + */ +static inline void get_next_buf(struct au0828_dmaqueue *dma_q, + struct au0828_buffer **buf) +{ + struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); + + if (list_empty(&dma_q->active)) { + au0828_isocdbg("No active queue to serve\n"); + dev->isoc_ctl.buf = NULL; + *buf = NULL; + return; + } + + /* Get the next buffer */ + *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); + dev->isoc_ctl.buf = *buf; + + return; +} + +/* + * Controls the isoc copy of each urb packet + */ +static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) +{ + struct au0828_buffer *buf; + struct au0828_dmaqueue *dma_q = urb->context; + unsigned char *outp = NULL; + int i, len = 0, rc = 1; + unsigned char *p; + unsigned char fbyte; + + if (!dev) + return 0; + + if ((dev->dev_state & DEV_DISCONNECTED) || + (dev->dev_state & DEV_MISCONFIGURED)) + return 0; + + if (urb->status < 0) { + print_err_status(dev, -1, urb->status); + if (urb->status == -ENOENT) + return 0; + } + + buf = dev->isoc_ctl.buf; + if (buf != NULL) + outp = videobuf_to_vmalloc(&buf->vb); + + for (i = 0; i < urb->number_of_packets; i++) { + int status = urb->iso_frame_desc[i].status; + + if (status < 0) { + print_err_status(dev, i, status); + if (urb->iso_frame_desc[i].status != -EPROTO) + continue; + } + + if (urb->iso_frame_desc[i].actual_length <= 0) { + continue; + } + if (urb->iso_frame_desc[i].actual_length > + dev->max_pkt_size) { + au0828_isocdbg("packet bigger than packet size"); + continue; + } + + p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + fbyte = p[0]; + len = urb->iso_frame_desc[i].actual_length - 4; + p += 4; + + if (fbyte & 0x80) { + len -= 4; + p += 4; + au0828_isocdbg("Video frame %s\n", + (fbyte & 0x40) ? "odd" : "even"); + if (!(fbyte & 0x40)) { + if (buf != NULL) + buffer_filled(dev, dma_q, buf); + get_next_buf(dma_q, &buf); + if (buf == NULL) { + outp = NULL; + } else + outp = videobuf_to_vmalloc(&buf->vb); + } + + if (buf != NULL) { + if (fbyte & 0x40) { + buf->top_field = 1; + } else { + buf->top_field = 0; + } + } + + dma_q->pos = 0; + } + if (buf != NULL) { + au0828_copy_video(dev, dma_q, buf, p, outp, len); + } + } + return rc; +} + +static int +buffer_setup(struct videobuf_queue *vq, unsigned int *count, + unsigned int *size) +{ + struct au0828_fh *fh = vq->priv_data; + *size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; + + if (0 == *count) + *count = AU0828_DEF_BUF; + + if (*count < AU0828_MIN_BUF) + *count = AU0828_MIN_BUF; + return 0; +} + +/* This is called *without* dev->slock held; please keep it that way */ +static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) +{ + struct au0828_fh *fh = vq->priv_data; + struct au0828_dev *dev = fh->dev; + unsigned long flags = 0; + if (in_interrupt()) + BUG(); + + /* We used to wait for the buffer to finish here, but this didn't work + because, as we were keeping the state as VIDEOBUF_QUEUED, + videobuf_queue_cancel marked it as finished for us. + (Also, it could wedge forever if the hardware was misconfigured.) + + This should be safe; by the time we get here, the buffer isn't + queued anymore. If we ever start marking the buffers as + VIDEOBUF_ACTIVE, it won't be, though. + */ + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.buf == buf) + dev->isoc_ctl.buf = NULL; + spin_unlock_irqrestore(&dev->slock, flags); + + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int +buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct au0828_fh *fh = vq->priv_data; + struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); + struct au0828_dev *dev = fh->dev; + int rc = 0, urb_init = 0; + + buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; + + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + buf->vb.width = dev->width; + buf->vb.height = dev->height; + buf->vb.field = field; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc < 0) { + printk("videobuf_iolock failed\n"); + goto fail; + } + } + + if (!dev->isoc_ctl.num_bufs) + urb_init = 1; + + if (urb_init) { + rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, + AU0828_MAX_ISO_BUFS, dev->max_pkt_size, + au0828_isoc_copy); + if (rc < 0) { + printk("au0828_init_isoc failed\n"); + goto fail; + } + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct au0828_buffer *buf = container_of(vb, + struct au0828_buffer, + vb); + struct au0828_fh *fh = vq->priv_data; + struct au0828_dev *dev = fh->dev; + struct au0828_dmaqueue *vidq = &dev->vidq; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); +} + +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) +{ + struct au0828_buffer *buf = container_of(vb, + struct au0828_buffer, + vb); + + free_buffer(vq, buf); +} + +static struct videobuf_queue_ops au0828_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ + V4L2 interface + ------------------------------------------------------------------*/ + +static int au0828_i2s_init(struct au0828_dev *dev) +{ + /* Enable i2s mode */ + au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01); + return 0; +} + +/* + * Auvitek au0828 analog stream enable + * Please set interface0 to AS5 before enable the stream + */ +int au0828_analog_stream_enable(struct au0828_dev *d) +{ + dprintk(1, "au0828_analog_stream_enable called\n"); + au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00); + au0828_writereg(d, 0x106, 0x00); + /* set x position */ + au0828_writereg(d, 0x110, 0x00); + au0828_writereg(d, 0x111, 0x00); + au0828_writereg(d, 0x114, 0xa0); + au0828_writereg(d, 0x115, 0x05); + /* set y position */ + au0828_writereg(d, 0x112, 0x02); + au0828_writereg(d, 0x113, 0x00); + au0828_writereg(d, 0x116, 0xf2); + au0828_writereg(d, 0x117, 0x00); + au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3); + + return 0; +} + +int au0828_analog_stream_disable(struct au0828_dev *d) +{ + dprintk(1, "au0828_analog_stream_disable called\n"); + au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); + return 0; +} + +void au0828_analog_stream_reset(struct au0828_dev *dev) +{ + dprintk(1, "au0828_analog_stream_reset called\n"); + au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0); + mdelay(30); + au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3); +} + +/* + * Some operations needs to stop current streaming + */ +static int au0828_stream_interrupt(struct au0828_dev *dev) +{ + int ret = 0; + + dev->stream_state = STREAM_INTERRUPT; + if(dev->dev_state == DEV_DISCONNECTED) + return -ENODEV; + else if(ret) { + dev->dev_state = DEV_MISCONFIGURED; + dprintk(1, "%s device is misconfigured!\n", __FUNCTION__); + return ret; + } + return 0; +} + +/* + * au0828_release_resources + * unregister v4l2 devices + */ +void au0828_analog_unregister(struct au0828_dev *dev) +{ + dprintk(1, "au0828_release_resources called\n"); + mutex_lock(&au0828_sysfs_lock); + + list_del(&dev->au0828list); + video_unregister_device(dev->vdev); + video_unregister_device(dev->vbi_dev); + + mutex_unlock(&au0828_sysfs_lock); +} + + +/* Usage lock check functions */ +static int res_get(struct au0828_fh *fh) +{ + struct au0828_dev *dev = fh->dev; + int rc = 0; + + /* This instance already has stream_on */ + if (fh->stream_on) + return rc; + + if (dev->stream_on) + return -EBUSY; + + dev->stream_on = 1; + fh->stream_on = 1; + return rc; +} + +static int res_check(struct au0828_fh *fh) +{ + return fh->stream_on; +} + +static void res_free(struct au0828_fh *fh) +{ + struct au0828_dev *dev = fh->dev; + + fh->stream_on = 0; + dev->stream_on = 0; +} + +static int au0828_v4l2_open(struct file *filp) +{ + int minor = video_devdata(filp)->minor; + int ret = 0; + struct au0828_dev *h, *dev = NULL; + struct au0828_fh *fh; + int type = 0; + struct list_head *list; + + list_for_each(list, &au0828_devlist) { + h = list_entry(list, struct au0828_dev, au0828list); + if(h->vdev->minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + if(h->vbi_dev->minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VBI_CAPTURE; + } + } + + if(NULL == dev) + return -ENODEV; + + fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL); + if(NULL == fh) { + dprintk(1, "Failed allocate au0828_fh struct!\n"); + return -ENOMEM; + } + + fh->type = type; + fh->dev = dev; + filp->private_data = fh; + + if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { + /* set au0828 interface0 to AS5 here again */ + ret = usb_set_interface(dev->usbdev, 0, 5); + if(ret < 0) { + printk("Au0828 can't set alt setting to 5!\n"); + return -EBUSY; + } + dev->width = NTSC_STD_W; + dev->height = NTSC_STD_H; + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->width * dev->height; + dev->bytesperline = dev->width * 2; + + au0828_analog_stream_enable(dev); + au0828_analog_stream_reset(dev); + + /* If we were doing ac97 instead of i2s, it would go here...*/ + au0828_i2s_init(dev); + + dev->stream_state = STREAM_OFF; + dev->dev_state |= DEV_INITIALIZED; + } + + dev->users++; + + videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops, + NULL, &dev->slock, fh->type, + V4L2_FIELD_INTERLACED, + sizeof(struct au0828_buffer), fh); + + return ret; +} + +static int au0828_v4l2_close(struct file *filp) +{ + int ret; + struct au0828_fh *fh = filp->private_data; + struct au0828_dev *dev = fh->dev; + + mutex_lock(&dev->lock); + if (res_check(fh)) + res_free(fh); + + if(dev->users == 1) { + videobuf_stop(&fh->vb_vidq); + videobuf_mmap_free(&fh->vb_vidq); + + if(dev->dev_state & DEV_DISCONNECTED) { + au0828_analog_unregister(dev); + mutex_unlock(&dev->lock); + kfree(dev); + return 0; + } + + au0828_analog_stream_disable(dev); + + au0828_uninit_isoc(dev); + + /* When close the device, set the usb intf0 into alt0 to free + USB bandwidth */ + ret = usb_set_interface(dev->usbdev, 0, 0); + if(ret < 0) + printk("Au0828 can't set alt setting to 0!\n"); + } + + kfree(fh); + dev->users--; + wake_up_interruptible_nr(&dev->open, 1); + mutex_unlock(&dev->lock); + return 0; +} + +static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf, + size_t count, loff_t *pos) +{ + struct au0828_fh *fh = filp->private_data; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + mutex_lock(&dev->lock); + rc = res_get(fh); + mutex_unlock(&dev->lock); + + if (unlikely(rc < 0)) + return rc; + + return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, + filp->f_flags & O_NONBLOCK); + } + return 0; +} + +static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait) +{ + struct au0828_fh *fh = filp->private_data; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + mutex_lock(&dev->lock); + rc = res_get(fh); + mutex_unlock(&dev->lock); + + if (unlikely(rc < 0)) + return POLLERR; + + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return POLLERR; + + return videobuf_poll_stream(filp, &fh->vb_vidq, wait); +} + +static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct au0828_fh *fh = filp->private_data; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + mutex_lock(&dev->lock); + rc = res_get(fh); + mutex_unlock(&dev->lock); + + if (unlikely(rc < 0)) + return rc; + + rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); + + dprintk(2, "vma start=0x%08lx, size=%ld, ret=%d\n", + (unsigned long)vma->vm_start, + (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, + rc); + + return rc; +} + +static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, + struct v4l2_format *format) +{ + int ret; + int width = format->fmt.pix.width; + int height = format->fmt.pix.height; + unsigned int maxwidth, maxheight; + + maxwidth = 720; + maxheight = 480; + + if(format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) { + dprintk(1, "VBI format set: to be supported!\n"); + return 0; + } + if(format->type == V4L2_BUF_TYPE_VBI_CAPTURE) { + return 0; + } + if(format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) { + return -EINVAL; + } + + /* If they are demanding a format other than the one we support, + bail out (tvtime asks for UYVY and then retries with YUYV) */ + if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) { + return -EINVAL; + } + + /* format->fmt.pix.width only support 720 and height 480 */ + if(width != 720) + width = 720; + if(height != 480) + height = 480; + + format->fmt.pix.width = width; + format->fmt.pix.height = height; + format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; + format->fmt.pix.bytesperline = width * 2; + format->fmt.pix.sizeimage = width * height * 2; + format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->fmt.pix.field = V4L2_FIELD_INTERLACED; + + if(cmd == VIDIOC_TRY_FMT) + return 0; + + /* maybe set new image format, driver current only support 720*480 */ + dev->width = width; + dev->height = height; + dev->frame_size = width * height * 2; + dev->field_size = width * height; + dev->bytesperline = width * 2; + + if(dev->stream_state == STREAM_ON) { + dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n"); + if((ret = au0828_stream_interrupt(dev))) { + dprintk(1, "error interrupting video stream!\n"); + return ret; + } + } + + /* set au0828 interface0 to AS5 here again */ + ret = usb_set_interface(dev->usbdev, 0, 5); + if(ret < 0) { + printk("Au0828 can't set alt setting to 5!\n"); + return -EBUSY; + } + + au0828_analog_stream_enable(dev); + + return 0; +} + + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + au0828_call_i2c_clients(dev, VIDIOC_QUERYCTRL, qc); + if (qc->type) + return 0; + else + return -EINVAL; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + memset(cap, 0, sizeof(*cap)); + strlcpy(cap->driver, "au0828", sizeof(cap->driver)); + strlcpy(cap->card, au0828_boards[dev->board].name, sizeof(cap->card)); + strlcpy(cap->bus_info, dev->usbdev->dev.bus_id, sizeof(cap->bus_info)); + + cap->version = AU0828_VERSION_CODE; + + /*set the device capabilities */ + cap->capabilities = V4L2_CAP_VBI_CAPTURE | + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_AUDIO | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_TUNER; + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if(f->index) + return -EINVAL; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(f->description, "Packed YUV2"); + + f->flags = 0; + f->pixelformat = V4L2_PIX_FMT_UYVY; + + memset(f->reserved, 0, sizeof(f->reserved)); + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; + f->fmt.pix.bytesperline = dev->bytesperline; + f->fmt.pix.sizeimage = dev->frame_size; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */ + f->fmt.pix.field = V4L2_FIELD_INTERLACED; + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + return au0828_set_format(dev, VIDIOC_TRY_FMT, f); +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + + if (videobuf_queue_is_busy(&fh->vb_vidq)) { + printk("%s queue busy\n", __func__); + rc = -EBUSY; + goto out; + } + + if (dev->stream_on && !fh->stream_on) { + printk("%s device in use by another fh\n", __func__); + rc = -EBUSY; + goto out; + } + + return au0828_set_format(dev, VIDIOC_S_FMT, f); +out: + return rc; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + /* FIXME: when we support something other than NTSC, we are going to + have to make the au0828 bridge adjust the size of its capture + buffer, which is currently hardcoded at 720x480 */ + + au0828_call_i2c_clients(dev, VIDIOC_S_STD, norm); + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *input) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + unsigned int tmp; + + static const char *inames[] = { + [AU0828_VMUX_COMPOSITE] = "Composite", + [AU0828_VMUX_SVIDEO] = "S-Video", + [AU0828_VMUX_CABLE] = "Cable TV", + [AU0828_VMUX_TELEVISION] = "Television", + [AU0828_VMUX_DVB] = "DVB", + [AU0828_VMUX_DEBUG] = "tv debug" + }; + + tmp = input->index; + + if(tmp > AU0828_MAX_INPUT) + return -EINVAL; + if(AUVI_INPUT(tmp)->type == 0) + return -EINVAL; + + memset(input, 0, sizeof(*input)); + input->index = tmp; + strcpy(input->name, inames[AUVI_INPUT(tmp)->type]); + if((AUVI_INPUT(tmp)->type == AU0828_VMUX_TELEVISION) || + (AUVI_INPUT(tmp)->type == AU0828_VMUX_CABLE)) + input->type |= V4L2_INPUT_TYPE_TUNER; + else + input->type |= V4L2_INPUT_TYPE_CAMERA; + + input->std = dev->vdev->tvnorms; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + *i = dev->ctrl_input; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int index) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int i; + struct v4l2_routing route; + + dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __FUNCTION__, + index); + if(index >= AU0828_MAX_INPUT) + return -EINVAL; + if(AUVI_INPUT(index)->type == 0) + return -EINVAL; + dev->ctrl_input = index; + + switch(AUVI_INPUT(index)->type) { + case AU0828_VMUX_SVIDEO: + { + dev->input_type = AU0828_VMUX_SVIDEO; + break; + } + case AU0828_VMUX_COMPOSITE: + { + dev->input_type = AU0828_VMUX_COMPOSITE; + break; + } + case AU0828_VMUX_TELEVISION: + { + dev->input_type = AU0828_VMUX_TELEVISION; + break; + } + default: + ; + } + + route.input = AUVI_INPUT(index)->vmux; + route.output = 0; + au0828_call_i2c_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route); + + for (i = 0; i < AU0828_MAX_INPUT; i++) { + int enable = 0; + if (AUVI_INPUT(i)->audio_setup == NULL) { + continue; + } + + if (i == index) + enable = 1; + else + enable = 0; + if (enable) { + (AUVI_INPUT(i)->audio_setup)(dev, enable); + } else { + /* Make sure we leave it turned on if some + other input is routed to this callback */ + if ((AUVI_INPUT(i)->audio_setup) != + ((AUVI_INPUT(index)->audio_setup))) { + (AUVI_INPUT(i)->audio_setup)(dev, enable); + } + } + } + + route.input = AUVI_INPUT(index)->amux; + au0828_call_i2c_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, + &route); + return 0; +} + +static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + unsigned int index = a->index; + + if(a->index > 1) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + index = dev->ctrl_ainput; + if(index == 0) + strcpy(a->name, "Television"); + else + strcpy(a->name, "Line in"); + + a->capability = V4L2_AUDCAP_STEREO; + a->index = index; + return 0; +} + +static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + if(a->index != dev->ctrl_ainput) + return -EINVAL; + return 0; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + au0828_call_i2c_clients(dev, VIDIOC_G_CTRL, ctrl); + return 0; + +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + au0828_call_i2c_clients(dev, VIDIOC_S_CTRL, ctrl); + return 0; +} + +static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + if(t->index != 0) + return -EINVAL; + + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Auvitek tuner"); + + au0828_call_i2c_clients(dev, VIDIOC_G_TUNER, t); + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + if(t->index != 0) + return -EINVAL; + + t->type = V4L2_TUNER_ANALOG_TV; + au0828_call_i2c_clients(dev, VIDIOC_S_TUNER, t); + dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, + t->afc); + return 0; + +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + memset(freq, 0, sizeof(*freq)); + freq->type = V4L2_TUNER_ANALOG_TV; + freq->frequency = dev->ctrl_freq; + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + if(freq->tuner != 0) + return -EINVAL; + if(freq->type != V4L2_TUNER_ANALOG_TV) + return -EINVAL; + + dev->ctrl_freq = freq->frequency; + + au0828_call_i2c_clients(dev, VIDIOC_S_FREQUENCY, freq); + + au0828_analog_stream_reset(dev); + + return 0; +} + +static int vidioc_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + + au0828_call_i2c_clients(dev, VIDIOC_DBG_G_CHIP_IDENT, chip); + return 0; +} + +static int vidioc_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cc) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + if(cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + cc->bounds.left = 0; + cc->bounds.top = 0; + cc->bounds.width = dev->width; + cc->bounds.height = dev->height; + + cc->defrect = cc->bounds; + + cc->pixelaspect.numerator = 54; + cc->pixelaspect.denominator = 59; + + return 0; +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int b = V4L2_BUF_TYPE_VIDEO_CAPTURE; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + au0828_analog_stream_enable(dev); + au0828_call_i2c_clients(dev, VIDIOC_STREAMON, &b); + } + + mutex_lock(&dev->lock); + rc = res_get(fh); + + if (likely(rc >= 0)) + rc = videobuf_streamon(&fh->vb_vidq); + mutex_unlock(&dev->lock); + + return rc; +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int b = V4L2_BUF_TYPE_VIDEO_CAPTURE; + int i; + int ret; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (type != fh->type) + return -EINVAL; + + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + au0828_call_i2c_clients(dev, VIDIOC_STREAMOFF, &b); + if((ret = au0828_stream_interrupt(dev)) != 0) + return ret; + } + + for (i = 0; i < AU0828_MAX_INPUT; i++) { + if (AUVI_INPUT(i)->audio_setup == NULL) { + continue; + } + (AUVI_INPUT(i)->audio_setup)(dev, 0); + } + + mutex_lock(&dev->lock); + videobuf_streamoff(&fh->vb_vidq); + res_free(fh); + mutex_unlock(&dev->lock); + + return 0; +} + +static int vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + switch (reg->match.type) { + case V4L2_CHIP_MATCH_I2C_DRIVER: + au0828_call_i2c_clients(dev, VIDIOC_DBG_G_REGISTER, reg); + return 0; + default: + return -EINVAL; + } +} + +static int vidioc_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + + switch (reg->match.type) { + case V4L2_CHIP_MATCH_I2C_DRIVER: + au0828_call_i2c_clients(dev, VIDIOC_DBG_S_REGISTER, reg); + return 0; + default: + return -EINVAL; + } + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + return videobuf_reqbufs(&fh->vb_vidq, rb); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + return videobuf_querybuf(&fh->vb_vidq, b); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + return videobuf_qbuf(&fh->vb_vidq, b); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct au0828_fh *fh = priv; + struct au0828_dev *dev = fh->dev; + int rc; + + rc = check_dev(dev); + if (rc < 0) + return rc; + + /* Workaround for a bug in the au0828 hardware design that sometimes + results in the colorspace being inverted */ + if (dev->greenscreen_detected == 1) { + dprintk(1, "Detected green frame. Resetting stream...\n"); + au0828_analog_stream_reset(dev); + dev->greenscreen_detected = 0; + } + + return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK); +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) +{ + struct au0828_fh *fh = priv; + + return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8); +} +#endif + +static struct v4l2_file_operations au0828_v4l_fops = { + .owner = THIS_MODULE, + .open = au0828_v4l2_open, + .release = au0828_v4l2_close, + .read = au0828_v4l2_read, + .poll = au0828_v4l2_poll, + .mmap = au0828_v4l2_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_cropcap = vidioc_cropcap, +#ifdef AAA + .vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap, + .vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap, + .vidioc_s_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap, +#endif + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, + .vidioc_g_chip_ident = vidioc_g_chip_ident, +#endif +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif +}; + +static const struct video_device au0828_video_template = { + .fops = &au0828_v4l_fops, + .release = video_device_release, + .ioctl_ops = &video_ioctl_ops, + .minor = -1, + .tvnorms = V4L2_STD_NTSC, + .current_norm = V4L2_STD_NTSC, +}; + +/**************************************************************************/ + +int au0828_analog_register(struct au0828_dev *dev) +{ + int retval = -ENOMEM; + + dprintk(1, "au0828_analog_register called!\n"); + + /* Load the analog demodulator driver (note this would need to be + abstracted out if we ever need to support a different demod) */ + request_module("au8522"); + + /* Load the tuner module, which results in i2c enumeration and + attachment of whatever tuner is on the bus */ + request_module("tuner"); + + init_waitqueue_head(&dev->open); + spin_lock_init(&dev->slock); + mutex_init(&dev->lock); + + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + + dev->width = NTSC_STD_W; + dev->height = NTSC_STD_H; + dev->field_size = dev->width * dev->height; + dev->frame_size = dev->field_size << 1; + dev->bytesperline = dev->width << 1; + dev->ctrl_ainput = 0; + + /* allocate and fill v4l2 video struct */ + dev->vdev = video_device_alloc(); + if(NULL == dev->vdev) { + dprintk(1, "Can't allocate video_device.\n"); + return -ENOMEM; + } + + dev->vbi_dev = video_device_alloc(); + if(NULL == dev->vbi_dev) { + dprintk(1, "Can't allocate vbi_device.\n"); + kfree(dev->vdev); + return -ENOMEM; + } + + /* Fill the video capture device struct */ + *dev->vdev = au0828_video_template; + dev->vdev->vfl_type = VID_TYPE_CAPTURE | VID_TYPE_TUNER; + dev->vdev->parent = &dev->usbdev->dev; + strcpy(dev->vdev->name, "au0828a video"); + + /* Setup the VBI device */ + *dev->vbi_dev = au0828_video_template; + dev->vbi_dev->vfl_type = VFL_TYPE_VBI; + dev->vbi_dev->parent = &dev->usbdev->dev; + strcpy(dev->vbi_dev->name, "au0828a vbi"); + + list_add_tail(&dev->au0828list, &au0828_devlist); + + /* Register the v4l2 device */ + if((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1)) != 0) { + dprintk(1, "unable to register video device (error = %d).\n", retval); + list_del(&dev->au0828list); + video_device_release(dev->vdev); + return -ENODEV; + } + + /* Register the vbi device */ + if((retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1)) != 0) { + dprintk(1, "unable to register vbi device (error = %d).\n", retval); + list_del(&dev->au0828list); + video_device_release(dev->vbi_dev); + video_device_release(dev->vdev); + return -ENODEV; + } + + dprintk(1, "%s completed!\n", __FUNCTION__); + + return 0; +} + diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h index 9d6a116..3b8e3e9 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/video/au0828/au0828.h @@ -24,6 +24,10 @@ #include <linux/i2c-algo-bit.h> #include <media/tveeprom.h> +/* Analog */ +#include <linux/videodev2.h> +#include <media/videobuf-vmalloc.h> + /* DVB */ #include "demux.h" #include "dmxdev.h" @@ -39,8 +43,48 @@ #define URB_COUNT 16 #define URB_BUFSIZE (0xe522) +/* Analog constants */ +#define NTSC_STD_W 720 +#define NTSC_STD_H 480 + +#define AU0828_INTERLACED_DEFAULT 1 +#define V4L2_CID_PRIVATE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 0) + +/* Defination for AU0828 USB transfer */ +#define AU0828_MAX_ISO_BUFS 12 /* maybe resize this value in the future */ +#define AU0828_ISO_PACKETS_PER_URB 10 +#define AU0828_ISO_MAX_FRAME_SIZE (3 * 1024) +#define AU0828_ISO_BUFFER_SIZE (AU0828_ISO_PACKETS_PER_URB * AU0828_ISO_MAX_FRAME_SIZE) + +#define AU0828_MIN_BUF 4 +#define AU0828_DEF_BUF 8 + +#define AU0828_MAX_IMAGES 10 +#define AU0828_FRAME_SIZE (1028 * 1024 * 4) +#define AU0828_URB_TIMEOUT msecs_to_jiffies(AU0828_MAX_ISO_BUFS * AU0828_ISO_PACKETS_PER_URB) + +#define AU0828_MAX_INPUT 4 + +enum au0828_itype { + AU0828_VMUX_COMPOSITE = 1, + AU0828_VMUX_SVIDEO, + AU0828_VMUX_CABLE, + AU0828_VMUX_TELEVISION, + AU0828_VMUX_DVB, + AU0828_VMUX_DEBUG +}; + +struct au0828_input { + enum au0828_itype type; + unsigned int vmux; + unsigned int amux; + void (*audio_setup) (void *priv, int enable); +}; + struct au0828_board { char *name; + struct au0828_input input[AU0828_MAX_INPUT]; + }; struct au0828_dvb { @@ -55,6 +99,83 @@ struct au0828_dvb { int feeding; }; +enum au0828_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON +}; + +#define AUVI_INPUT(nr) (&au0828_boards[dev->board].input[nr]) + +/* device state */ +enum au0828_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04 +}; + +struct au0828_fh { + struct au0828_dev *dev; + unsigned int stream_on:1; /* Locks streams */ + struct videobuf_queue vb_vidq; + enum v4l2_buf_type type; +}; + +struct au0828_usb_isoc_ctl { + /* max packet size of isoc transaction */ + int max_pkt_size; + + /* number of allocated urbs */ + int num_bufs; + + /* urb for isoc transfers */ + struct urb **urb; + + /* transfer buffers for isoc transfer */ + char **transfer_buffer; + + /* Last buffer command and region */ + u8 cmd; + int pos, size, pktsize; + + /* Last field: ODD or EVEN? */ + int field; + + /* Stores incomplete commands */ + u32 tmp_buf; + int tmp_buf_len; + + /* Stores already requested buffers */ + struct au0828_buffer *buf; + + /* Stores the number of received fields */ + int nfields; + + /* isoc urb callback */ + int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb); + +}; + +/* buffer for one video frame */ +struct au0828_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + struct list_head frame; + int top_field; + int receiving; +}; + +struct au0828_dmaqueue { + struct list_head active; + struct list_head queued; + + wait_queue_head_t wq; + + /* Counters to control buffer fill */ + int pos; +}; + struct au0828_dev { struct mutex mutex; struct usb_device *usbdev; @@ -70,16 +191,49 @@ struct au0828_dev { /* Digital */ struct au0828_dvb dvb; + /* Analog */ + struct list_head au0828list; + int users; + unsigned int stream_on:1; /* Locks streams */ + struct video_device *vdev; + struct video_device *vbi_dev; + int width; + int height; + u32 field_size; + u32 frame_size; + u32 bytesperline; + int type; + u8 ctrl_ainput; + __u8 isoc_in_endpointaddr; + u8 isoc_init_ok; + int greenscreen_detected; + unsigned int frame_count; + int ctrl_freq; + int input_type; + unsigned int ctrl_input; + enum au0828_dev_state dev_state; + enum au0828_stream_state stream_state; + wait_queue_head_t open; + + struct mutex lock; + + /* Isoc control struct */ + struct au0828_dmaqueue vidq; + struct au0828_usb_isoc_ctl isoc_ctl; + spinlock_t slock; + + /* usb transfer */ + int alt; /* alternate */ + int max_pkt_size; /* max packet size of isoc transaction */ + int num_alt; /* Number of alternative settings */ + unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ + struct urb *urb[AU0828_MAX_ISO_BUFS]; /* urb for isoc transfers */ + char *transfer_buffer[AU0828_MAX_ISO_BUFS];/* transfer buffers for isoc + transfer */ + /* USB / URB Related */ int urb_streaming; struct urb *urbs[URB_COUNT]; - -}; - -struct au0828_buff { - struct au0828_dev *dev; - struct urb *purb; - struct list_head buff_list; }; /* ----------------------------------------------------------- */ @@ -115,6 +269,12 @@ extern void au0828_call_i2c_clients(struct au0828_dev *dev, unsigned int cmd, void *arg); /* ----------------------------------------------------------- */ +/* au0828-video.c */ +int au0828_analog_register(struct au0828_dev *dev); +int au0828_analog_stream_disable(struct au0828_dev *d); +void au0828_analog_unregister(struct au0828_dev *dev); + +/* ----------------------------------------------------------- */ /* au0828-dvb.c */ extern int au0828_dvb_register(struct au0828_dev *dev); extern void au0828_dvb_unregister(struct au0828_dev *dev); |
