summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/em28xx/em28xx-camera.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/em28xx/em28xx-camera.c')
-rw-r--r--drivers/media/usb/em28xx/em28xx-camera.c107
1 files changed, 28 insertions, 79 deletions
diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
index 89c890b..ae87dd3 100644
--- a/drivers/media/usb/em28xx/em28xx-camera.c
+++ b/drivers/media/usb/em28xx/em28xx-camera.c
@@ -23,9 +23,7 @@
#include <linux/i2c.h>
#include <linux/usb.h>
-#include <media/soc_camera.h>
#include <media/i2c/mt9v011.h>
-#include <media/v4l2-clk.h>
#include <media/v4l2-common.h>
/* Possible i2c addresses of Micron sensors */
@@ -43,13 +41,6 @@ static unsigned short omnivision_sensor_addrs[] = {
I2C_CLIENT_END
};
-static struct soc_camera_link camlink = {
- .bus_id = 0,
- .flags = 0,
- .module_name = "em28xx",
- .unbalanced_power = true,
-};
-
/* FIXME: Should be replaced by a proper mt9m111 driver */
static int em28xx_initialize_mt9m111(struct em28xx *dev)
{
@@ -106,55 +97,35 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
{
int ret, i;
char *name;
- u8 reg;
- __be16 id_be;
u16 id;
- struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+ struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
dev->em28xx_sensor = EM28XX_NOSENSOR;
for (i = 0; micron_sensor_addrs[i] != I2C_CLIENT_END; i++) {
- client.addr = micron_sensor_addrs[i];
- /* NOTE: i2c_smbus_read_word_data() doesn't work with BE data */
+ client->addr = micron_sensor_addrs[i];
/* Read chip ID from register 0x00 */
- reg = 0x00;
- ret = i2c_master_send(&client, &reg, 1);
+ ret = i2c_smbus_read_word_data(client, 0x00); /* assumes LE */
if (ret < 0) {
if (ret != -ENXIO)
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
- continue;
- }
- ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
- if (ret < 0) {
- dev_err(&dev->intf->dev,
- "couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
- id = be16_to_cpu(id_be);
+ id = swab16(ret); /* LE -> BE */
/* Read chip ID from register 0xff */
- reg = 0xff;
- ret = i2c_master_send(&client, &reg, 1);
+ ret = i2c_smbus_read_word_data(client, 0xff);
if (ret < 0) {
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
- continue;
- }
- ret = i2c_master_recv(&client, (u8 *)&id_be, 2);
- if (ret < 0) {
- dev_err(&dev->intf->dev,
- "couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
/* Validate chip ID to be sure we have a Micron device */
- if (id != be16_to_cpu(id_be))
+ if (id != swab16(ret))
continue;
/* Check chip ID */
- id = be16_to_cpu(id_be);
switch (id) {
case 0x1222:
name = "MT9V012"; /* MI370 */ /* 640x480 */
@@ -197,7 +168,6 @@ static int em28xx_probe_sensor_micron(struct em28xx *dev)
dev_info(&dev->intf->dev,
"sensor %s detected\n", name);
- dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
return 0;
}
@@ -213,30 +183,30 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
char *name;
u8 reg;
u16 id;
- struct i2c_client client = dev->i2c_client[dev->def_i2c_bus];
+ struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
dev->em28xx_sensor = EM28XX_NOSENSOR;
/* NOTE: these devices have the register auto incrementation disabled
* by default, so we have to use single byte reads ! */
for (i = 0; omnivision_sensor_addrs[i] != I2C_CLIENT_END; i++) {
- client.addr = omnivision_sensor_addrs[i];
+ client->addr = omnivision_sensor_addrs[i];
/* Read manufacturer ID from registers 0x1c-0x1d (BE) */
reg = 0x1c;
- ret = i2c_smbus_read_byte_data(&client, reg);
+ ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
if (ret != -ENXIO)
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
id = ret << 8;
reg = 0x1d;
- ret = i2c_smbus_read_byte_data(&client, reg);
+ ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
id += ret;
@@ -245,20 +215,20 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
continue;
/* Read product ID from registers 0x0a-0x0b (BE) */
reg = 0x0a;
- ret = i2c_smbus_read_byte_data(&client, reg);
+ ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
id = ret << 8;
reg = 0x0b;
- ret = i2c_smbus_read_byte_data(&client, reg);
+ ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0) {
dev_err(&dev->intf->dev,
"couldn't read from i2c device 0x%02x: error %i\n",
- client.addr << 1, ret);
+ client->addr << 1, ret);
continue;
}
id += ret;
@@ -309,7 +279,6 @@ static int em28xx_probe_sensor_omnivision(struct em28xx *dev)
dev_info(&dev->intf->dev,
"sensor %s detected\n", name);
- dev->i2c_client[dev->def_i2c_bus].addr = client.addr;
return 0;
}
@@ -341,17 +310,9 @@ int em28xx_detect_sensor(struct em28xx *dev)
int em28xx_init_camera(struct em28xx *dev)
{
- char clk_name[V4L2_CLK_NAME_SIZE];
struct i2c_client *client = &dev->i2c_client[dev->def_i2c_bus];
struct i2c_adapter *adap = &dev->i2c_adap[dev->def_i2c_bus];
struct em28xx_v4l2 *v4l2 = dev->v4l2;
- int ret = 0;
-
- v4l2_clk_name_i2c(clk_name, sizeof(clk_name),
- i2c_adapter_id(adap), client->addr);
- v4l2->clk = v4l2_clk_register_fixed(clk_name, -EINVAL);
- if (IS_ERR(v4l2->clk))
- return PTR_ERR(v4l2->clk);
switch (dev->em28xx_sensor) {
case EM28XX_MT9V011:
@@ -381,12 +342,9 @@ int em28xx_init_camera(struct em28xx *dev)
pdata.xtal = v4l2->sensor_xtal;
if (NULL ==
v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap,
- &mt9v011_info, NULL)) {
- ret = -ENODEV;
- break;
- }
- /* probably means GRGB 16 bit bayer */
- v4l2->vinmode = 0x0d;
+ &mt9v011_info, NULL))
+ return -ENODEV;
+ v4l2->vinmode = EM28XX_VINMODE_RGB8_GRBG;
v4l2->vinctl = 0x00;
break;
@@ -397,8 +355,7 @@ int em28xx_init_camera(struct em28xx *dev)
em28xx_initialize_mt9m001(dev);
- /* probably means BGGR 16 bit bayer */
- v4l2->vinmode = 0x0c;
+ v4l2->vinmode = EM28XX_VINMODE_RGB8_BGGR;
v4l2->vinctl = 0x00;
break;
@@ -410,7 +367,7 @@ int em28xx_init_camera(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
em28xx_initialize_mt9m111(dev);
- v4l2->vinmode = 0x0a;
+ v4l2->vinmode = EM28XX_VINMODE_YUV422_UYVY;
v4l2->vinctl = 0x00;
break;
@@ -421,7 +378,6 @@ int em28xx_init_camera(struct em28xx *dev)
.type = "ov2640",
.flags = I2C_CLIENT_SCCB,
.addr = client->addr,
- .platform_data = &camlink,
};
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
@@ -441,10 +397,8 @@ int em28xx_init_camera(struct em28xx *dev)
subdev =
v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap,
&ov2640_info, NULL);
- if (NULL == subdev) {
- ret = -ENODEV;
- break;
- }
+ if (subdev == NULL)
+ return -ENODEV;
format.format.code = MEDIA_BUS_FMT_YUYV8_2X8;
format.format.width = 640;
@@ -454,21 +408,16 @@ int em28xx_init_camera(struct em28xx *dev)
/* NOTE: for UXGA=1600x1200 switch to 12MHz */
dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ;
em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk);
- v4l2->vinmode = 0x08;
+ v4l2->vinmode = EM28XX_VINMODE_YUV422_YUYV;
v4l2->vinctl = 0x00;
break;
}
case EM28XX_NOSENSOR:
default:
- ret = -EINVAL;
+ return -EINVAL;
}
- if (ret < 0) {
- v4l2_clk_unregister_fixed(v4l2->clk);
- v4l2->clk = NULL;
- }
-
- return ret;
+ return 0;
}
EXPORT_SYMBOL_GPL(em28xx_init_camera);
OpenPOWER on IntegriCloud