diff options
Diffstat (limited to 'drivers/media/usb/au0828/au0828-cards.c')
| -rw-r--r-- | drivers/media/usb/au0828/au0828-cards.c | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 7fdadf9..2c6b7da 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -46,7 +46,7 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR850", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -71,13 +71,14 @@ struct au0828_board au0828_boards[] = { .name = "Hauppauge HVR950Q", .tuner_type = TUNER_XC5000, .tuner_addr = 0x61, + .has_ir_i2c = 1, /* The au0828 hardware i2c implementation does not properly support the xc5000's i2c clock stretching. So we need to lower the clock frequency enough where the 15us clock stretch fits inside of a normal clock cycle, or else the au0828 fails to set the STOP bit. A 30 KHz clock puts the clock pulse width at 18us */ - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, .input = { { .type = AU0828_VMUX_TELEVISION, @@ -108,7 +109,7 @@ struct au0828_board au0828_boards[] = { .name = "DViCO FusionHDTV USB", .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, - .i2c_clk_divider = AU0828_I2C_CLK_20KHZ, + .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", |
