1 files changed, 269 insertions, 0 deletions
diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h
new file mode 100644
index 0000000..6c9a94a
--- /dev/null
+++ b/drivers/media/rc/img-ir/img-ir-hw.h
@@ -0,0 +1,269 @@
+/*
+ * ImgTec IR Hardware Decoder found in PowerDown Controller.
+ *
+ * Copyright 2010-2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _IMG_IR_HW_H_
+#define _IMG_IR_HW_H_
+
+#include <linux/kernel.h>
+#include <media/rc-core.h>
+
+/* constants */
+
+#define IMG_IR_CODETYPE_PULSELEN	0x0	/* Sony */
+#define IMG_IR_CODETYPE_PULSEDIST	0x1	/* NEC, Toshiba, Micom, Sharp */
+#define IMG_IR_CODETYPE_BIPHASE		0x2	/* RC-5/6 */
+#define IMG_IR_CODETYPE_2BITPULSEPOS	0x3	/* RC-MM */
+
+
+/* Timing information */
+
+/**
+ * struct img_ir_control - Decoder control settings
+ * @decoden:	Primary decoder enable
+ * @code_type:	Decode type (see IMG_IR_CODETYPE_*)
+ * @hdrtog:	Detect header toggle symbol after leader symbol
+ * @ldrdec:	Don't discard leader if maximum width reached
+ * @decodinpol:	Decoder input polarity (1=active high)
+ * @bitorien:	Bit orientation (1=MSB first)
+ * @d1validsel:	Decoder 2 takes over if it detects valid data
+ * @bitinv:	Bit inversion switch (1=don't invert)
+ * @decodend2:	Secondary decoder enable (no leader symbol)
+ * @bitoriend2:	Bit orientation (1=MSB first)
+ * @bitinvd2:	Secondary decoder bit inversion switch (1=don't invert)
+ */
+struct img_ir_control {
+	unsigned decoden:1;
+	unsigned code_type:2;
+	unsigned hdrtog:1;
+	unsigned ldrdec:1;
+	unsigned decodinpol:1;
+	unsigned bitorien:1;
+	unsigned d1validsel:1;
+	unsigned bitinv:1;
+	unsigned decodend2:1;
+	unsigned bitoriend2:1;
+	unsigned bitinvd2:1;
+};
+
+/**
+ * struct img_ir_timing_range - range of timing values
+ * @min:	Minimum timing value
+ * @max:	Maximum timing value (if < @min, this will be set to @min during
+ *		preprocessing step, so it is normally not explicitly initialised
+ *		and is taken care of by the tolerance)
+ */
+struct img_ir_timing_range {
+	u16 min;
+	u16 max;
+};
+
+/**
+ * struct img_ir_symbol_timing - timing data for a symbol
+ * @pulse:	Timing range for the length of the pulse in this symbol
+ * @space:	Timing range for the length of the space in this symbol
+ */
+struct img_ir_symbol_timing {
+	struct img_ir_timing_range pulse;
+	struct img_ir_timing_range space;
+};
+
+/**
+ * struct img_ir_free_timing - timing data for free time symbol
+ * @minlen:	Minimum number of bits of data
+ * @maxlen:	Maximum number of bits of data
+ * @ft_min:	Minimum free time after message
+ */
+struct img_ir_free_timing {
+	/* measured in bits */
+	u8 minlen;
+	u8 maxlen;
+	u16 ft_min;
+};
+
+/**
+ * struct img_ir_timings - Timing values.
+ * @ldr:	Leader symbol timing data
+ * @s00:	Zero symbol timing data for primary decoder
+ * @s01:	One symbol timing data for primary decoder
+ * @s10:	Zero symbol timing data for secondary (no leader symbol) decoder
+ * @s11:	One symbol timing data for secondary (no leader symbol) decoder
+ * @ft:		Free time symbol timing data
+ */
+struct img_ir_timings {
+	struct img_ir_symbol_timing ldr, s00, s01, s10, s11;
+	struct img_ir_free_timing ft;
+};
+
+/**
+ * struct img_ir_filter - Filter IR events.
+ * @data:	Data to match.
+ * @mask:	Mask of bits to compare.
+ * @minlen:	Additional minimum number of bits.
+ * @maxlen:	Additional maximum number of bits.
+ */
+struct img_ir_filter {
+	u64 data;
+	u64 mask;
+	u8 minlen;
+	u8 maxlen;
+};
+
+/**
+ * struct img_ir_timing_regvals - Calculated timing register values.
+ * @ldr:	Leader symbol timing register value
+ * @s00:	Zero symbol timing register value for primary decoder
+ * @s01:	One symbol timing register value for primary decoder
+ * @s10:	Zero symbol timing register value for secondary decoder
+ * @s11:	One symbol timing register value for secondary decoder
+ * @ft:		Free time symbol timing register value
+ */
+struct img_ir_timing_regvals {
+	u32 ldr, s00, s01, s10, s11, ft;
+};
+
+#define IMG_IR_SCANCODE		0	/* new scancode */
+#define IMG_IR_REPEATCODE	1	/* repeat the previous code */
+
+/**
+ * struct img_ir_decoder - Decoder settings for an IR protocol.
+ * @type:	Protocol types bitmap.
+ * @tolerance:	Timing tolerance as a percentage (default 10%).
+ * @unit:	Unit of timings in nanoseconds (default 1 us).
+ * @timings:	Primary timings
+ * @rtimings:	Additional override timings while waiting for repeats.
+ * @repeat:	Maximum repeat interval (always in milliseconds).
+ * @control:	Control flags.
+ *
+ * @scancode:	Pointer to function to convert the IR data into a scancode (it
+ *		must be safe to execute in interrupt context).
+ *		Returns IMG_IR_SCANCODE to emit new scancode.
+ *		Returns IMG_IR_REPEATCODE to repeat previous code.
+ *		Returns -errno (e.g. -EINVAL) on error.
+ * @filter:	Pointer to function to convert scancode filter to raw hardware
+ *		filter. The minlen and maxlen fields will have been initialised
+ *		to the maximum range.
+ */
+struct img_ir_decoder {
+	/* core description */
+	u64				type;
+	unsigned int			tolerance;
+	unsigned int			unit;
+	struct img_ir_timings		timings;
+	struct img_ir_timings		rtimings;
+	unsigned int			repeat;
+	struct img_ir_control		control;
+
+	/* scancode logic */
+	int (*scancode)(int len, u64 raw, int *scancode, u64 protocols);
+	int (*filter)(const struct rc_scancode_filter *in,
+		      struct img_ir_filter *out, u64 protocols);
+};
+
+/**
+ * struct img_ir_reg_timings - Reg values for decoder timings at clock rate.
+ * @ctrl:	Processed control register value.
+ * @timings:	Processed primary timings.
+ * @rtimings:	Processed repeat timings.
+ */
+struct img_ir_reg_timings {
+	u32				ctrl;
+	struct img_ir_timing_regvals	timings;
+	struct img_ir_timing_regvals	rtimings;
+};
+
+int img_ir_register_decoder(struct img_ir_decoder *dec);
+void img_ir_unregister_decoder(struct img_ir_decoder *dec);
+
+struct img_ir_priv;
+
+#ifdef CONFIG_IR_IMG_HW
+
+enum img_ir_mode {
+	IMG_IR_M_NORMAL,
+	IMG_IR_M_REPEATING,
+#ifdef CONFIG_PM_SLEEP
+	IMG_IR_M_WAKE,
+#endif
+};
+
+/**
+ * struct img_ir_priv_hw - Private driver data for hardware decoder.
+ * @ct_quirks:		Quirk bits for each code type.
+ * @rdev:		Remote control device
+ * @clk_nb:		Notifier block for clock notify events.
+ * @end_timer:		Timer until repeat timeout.
+ * @decoder:		Current decoder settings.
+ * @enabled_protocols:	Currently enabled protocols.
+ * @clk_hz:		Current core clock rate in Hz.
+ * @reg_timings:	Timing reg values for decoder at clock rate.
+ * @flags:		IMG_IR_F_*.
+ * @filters:		HW filters (derived from scancode filters).
+ * @mode:		Current decode mode.
+ * @suspend_irqen:	Saved IRQ enable mask over suspend.
+ */
+struct img_ir_priv_hw {
+	unsigned int			ct_quirks[4];
+	struct rc_dev			*rdev;
+	struct notifier_block		clk_nb;
+	struct timer_list		end_timer;
+	const struct img_ir_decoder	*decoder;
+	u64				enabled_protocols;
+	unsigned long			clk_hz;
+	struct img_ir_reg_timings	reg_timings;
+	unsigned int			flags;
+	struct img_ir_filter		filters[RC_FILTER_MAX];
+
+	enum img_ir_mode		mode;
+	u32				suspend_irqen;
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+	return hw->rdev;
+};
+
+void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status);
+void img_ir_setup_hw(struct img_ir_priv *priv);
+int img_ir_probe_hw(struct img_ir_priv *priv);
+void img_ir_remove_hw(struct img_ir_priv *priv);
+
+#ifdef CONFIG_PM_SLEEP
+int img_ir_suspend(struct device *dev);
+int img_ir_resume(struct device *dev);
+#else
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+#endif
+
+#else
+
+struct img_ir_priv_hw {
+};
+
+static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw)
+{
+	return false;
+};
+static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status)
+{
+}
+static inline void img_ir_setup_hw(struct img_ir_priv *priv)
+{
+}
+static inline int img_ir_probe_hw(struct img_ir_priv *priv)
+{
+	return -ENODEV;
+}
+static inline void img_ir_remove_hw(struct img_ir_priv *priv)
+{
+}
+
+#define img_ir_suspend NULL
+#define img_ir_resume NULL
+
+#endif /* CONFIG_IR_IMG_HW */
+
+#endif /* _IMG_IR_HW_H_ */