1 files changed, 778 insertions, 0 deletions

diff --git a/drivers/media/pci/cx25821/cx25821-audio-upstream.c b/drivers/media/pci/cx25821/cx25821-audio-upstream.c
new file mode 100644
index 0000000..8b2a999
--- /dev/null
+++ b/drivers/media/pci/cx25821/cx25821-audio-upstream.c
@@ -0,0 +1,778 @@
+/*
+ *  Driver for the Conexant CX25821 PCIe bridge
+ *
+ *  Copyright (C) 2009 Conexant Systems Inc.
+ *  Authors  <hiep.huynh@conexant.com>, <shu.lin@conexant.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "cx25821-video.h"
+#include "cx25821-audio-upstream.h"
+
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/syscalls.h>
+#include <linux/file.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
+MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
+MODULE_LICENSE("GPL");
+
+static int _intr_msk = FLD_AUD_SRC_RISCI1 | FLD_AUD_SRC_OF |
+			FLD_AUD_SRC_SYNC | FLD_AUD_SRC_OPC_ERR;
+
+int cx25821_sram_channel_setup_upstream_audio(struct cx25821_dev *dev,
+					      struct sram_channel *ch,
+					      unsigned int bpl, u32 risc)
+{
+	unsigned int i, lines;
+	u32 cdt;
+
+	if (ch->cmds_start == 0) {
+		cx_write(ch->ptr1_reg, 0);
+		cx_write(ch->ptr2_reg, 0);
+		cx_write(ch->cnt2_reg, 0);
+		cx_write(ch->cnt1_reg, 0);
+		return 0;
+	}
+
+	bpl = (bpl + 7) & ~7;	/* alignment */
+	cdt = ch->cdt;
+	lines = ch->fifo_size / bpl;
+
+	if (lines > 3)
+		lines = 3;
+
+	BUG_ON(lines < 2);
+
+	/* write CDT */
+	for (i = 0; i < lines; i++) {
+		cx_write(cdt + 16 * i, ch->fifo_start + bpl * i);
+		cx_write(cdt + 16 * i + 4, 0);
+		cx_write(cdt + 16 * i + 8, 0);
+		cx_write(cdt + 16 * i + 12, 0);
+	}
+
+	/* write CMDS */
+	cx_write(ch->cmds_start + 0, risc);
+
+	cx_write(ch->cmds_start + 4, 0);
+	cx_write(ch->cmds_start + 8, cdt);
+	cx_write(ch->cmds_start + 12, AUDIO_CDT_SIZE_QW);
+	cx_write(ch->cmds_start + 16, ch->ctrl_start);
+
+	/* IQ size */
+	cx_write(ch->cmds_start + 20, AUDIO_IQ_SIZE_DW);
+
+	for (i = 24; i < 80; i += 4)
+		cx_write(ch->cmds_start + i, 0);
+
+	/* fill registers */
+	cx_write(ch->ptr1_reg, ch->fifo_start);
+	cx_write(ch->ptr2_reg, cdt);
+	cx_write(ch->cnt2_reg, AUDIO_CDT_SIZE_QW);
+	cx_write(ch->cnt1_reg, AUDIO_CLUSTER_SIZE_QW - 1);
+
+	return 0;
+}
+
+static __le32 *cx25821_risc_field_upstream_audio(struct cx25821_dev *dev,
+						 __le32 *rp,
+						 dma_addr_t databuf_phys_addr,
+						 unsigned int bpl,
+						 int fifo_enable)
+{
+	unsigned int line;
+	struct sram_channel *sram_ch =
+		dev->channels[dev->_audio_upstream_channel].sram_channels;
+	int offset = 0;
+
+	/* scan lines */
+	for (line = 0; line < LINES_PER_AUDIO_BUFFER; line++) {
+		*(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl);
+		*(rp++) = cpu_to_le32(databuf_phys_addr + offset);
+		*(rp++) = cpu_to_le32(0);	/* bits 63-32 */
+
+		/* Check if we need to enable the FIFO
+		 * after the first 3 lines.
+		 * For the upstream audio channel,
+		 * the risc engine will enable the FIFO */
+		if (fifo_enable && line == 2) {
+			*(rp++) = RISC_WRITECR;
+			*(rp++) = sram_ch->dma_ctl;
+			*(rp++) = sram_ch->fld_aud_fifo_en;
+			*(rp++) = 0x00000020;
+		}
+
+		offset += AUDIO_LINE_SIZE;
+	}
+
+	return rp;
+}
+
+int cx25821_risc_buffer_upstream_audio(struct cx25821_dev *dev,
+				       struct pci_dev *pci,
+				       unsigned int bpl, unsigned int lines)
+{
+	__le32 *rp;
+	int fifo_enable = 0;
+	int frame = 0, i = 0;
+	int frame_size = AUDIO_DATA_BUF_SZ;
+	int databuf_offset = 0;
+	int risc_flag = RISC_CNT_INC;
+	dma_addr_t risc_phys_jump_addr;
+
+	/* Virtual address of Risc buffer program */
+	rp = dev->_risc_virt_addr;
+
+	/* sync instruction */
+	*(rp++) = cpu_to_le32(RISC_RESYNC | AUDIO_SYNC_LINE);
+
+	for (frame = 0; frame < NUM_AUDIO_FRAMES; frame++) {
+		databuf_offset = frame_size * frame;
+
+		if (frame == 0) {
+			fifo_enable = 1;
+			risc_flag = RISC_CNT_RESET;
+		} else {
+			fifo_enable = 0;
+			risc_flag = RISC_CNT_INC;
+		}
+
+		/* Calculate physical jump address */
+		if ((frame + 1) == NUM_AUDIO_FRAMES) {
+			risc_phys_jump_addr =
+			    dev->_risc_phys_start_addr +
+			    RISC_SYNC_INSTRUCTION_SIZE;
+		} else {
+			risc_phys_jump_addr =
+			    dev->_risc_phys_start_addr +
+			    RISC_SYNC_INSTRUCTION_SIZE +
+			    AUDIO_RISC_DMA_BUF_SIZE * (frame + 1);
+		}
+
+		rp = cx25821_risc_field_upstream_audio(dev, rp,
+				dev->_audiodata_buf_phys_addr + databuf_offset,
+				bpl, fifo_enable);
+
+		if (USE_RISC_NOOP_AUDIO) {
+			for (i = 0; i < NUM_NO_OPS; i++)
+				*(rp++) = cpu_to_le32(RISC_NOOP);
+		}
+
+		/* Loop to (Nth)FrameRISC or to Start of Risc program &
+		 * generate IRQ */
+		*(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag);
+		*(rp++) = cpu_to_le32(risc_phys_jump_addr);
+		*(rp++) = cpu_to_le32(0);
+
+		/* Recalculate virtual address based on frame index */
+		rp = dev->_risc_virt_addr + RISC_SYNC_INSTRUCTION_SIZE / 4 +
+			(AUDIO_RISC_DMA_BUF_SIZE * (frame + 1) / 4);
+	}
+
+	return 0;
+}
+
+void cx25821_free_memory_audio(struct cx25821_dev *dev)
+{
+	if (dev->_risc_virt_addr) {
+		pci_free_consistent(dev->pci, dev->_audiorisc_size,
+				    dev->_risc_virt_addr, dev->_risc_phys_addr);
+		dev->_risc_virt_addr = NULL;
+	}
+
+	if (dev->_audiodata_buf_virt_addr) {
+		pci_free_consistent(dev->pci, dev->_audiodata_buf_size,
+				    dev->_audiodata_buf_virt_addr,
+				    dev->_audiodata_buf_phys_addr);
+		dev->_audiodata_buf_virt_addr = NULL;
+	}
+}
+
+void cx25821_stop_upstream_audio(struct cx25821_dev *dev)
+{
+	struct sram_channel *sram_ch =
+		dev->channels[AUDIO_UPSTREAM_SRAM_CHANNEL_B].sram_channels;
+	u32 tmp = 0;
+
+	if (!dev->_audio_is_running) {
+		printk(KERN_DEBUG
+		       pr_fmt("No audio file is currently running so return!\n"));
+		return;
+	}
+	/* Disable RISC interrupts */
+	cx_write(sram_ch->int_msk, 0);
+
+	/* Turn OFF risc and fifo enable in AUD_DMA_CNTRL */
+	tmp = cx_read(sram_ch->dma_ctl);
+	cx_write(sram_ch->dma_ctl,
+		 tmp & ~(sram_ch->fld_aud_fifo_en | sram_ch->fld_aud_risc_en));
+
+	/* Clear data buffer memory */
+	if (dev->_audiodata_buf_virt_addr)
+		memset(dev->_audiodata_buf_virt_addr, 0,
+		       dev->_audiodata_buf_size);
+
+	dev->_audio_is_running = 0;
+	dev->_is_first_audio_frame = 0;
+	dev->_audioframe_count = 0;
+	dev->_audiofile_status = END_OF_FILE;
+
+	kfree(dev->_irq_audio_queues);
+	dev->_irq_audio_queues = NULL;
+
+	kfree(dev->_audiofilename);
+}
+
+void cx25821_free_mem_upstream_audio(struct cx25821_dev *dev)
+{
+	if (dev->_audio_is_running)
+		cx25821_stop_upstream_audio(dev);
+
+	cx25821_free_memory_audio(dev);
+}
+
+int cx25821_get_audio_data(struct cx25821_dev *dev,
+			   struct sram_channel *sram_ch)
+{
+	struct file *myfile;
+	int frame_index_temp = dev->_audioframe_index;
+	int i = 0;
+	int line_size = AUDIO_LINE_SIZE;
+	int frame_size = AUDIO_DATA_BUF_SZ;
+	int frame_offset = frame_size * frame_index_temp;
+	ssize_t vfs_read_retval = 0;
+	char mybuf[line_size];
+	loff_t file_offset = dev->_audioframe_count * frame_size;
+	loff_t pos;
+	mm_segment_t old_fs;
+
+	if (dev->_audiofile_status == END_OF_FILE)
+		return 0;
+
+	myfile = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
+
+	if (IS_ERR(myfile)) {
+		const int open_errno = -PTR_ERR(myfile);
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
+		       __func__, dev->_audiofilename, open_errno);
+		return PTR_ERR(myfile);
+	} else {
+		if (!(myfile->f_op)) {
+			pr_err("%s(): File has no file operations registered!\n",
+				__func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		if (!myfile->f_op->read) {
+			pr_err("%s(): File has no READ operations registered!\n",
+				__func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		pos = myfile->f_pos;
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		for (i = 0; i < dev->_audio_lines_count; i++) {
+			pos = file_offset;
+
+			vfs_read_retval = vfs_read(myfile, mybuf, line_size,
+									&pos);
+
+			if (vfs_read_retval > 0 && vfs_read_retval == line_size
+			    && dev->_audiodata_buf_virt_addr != NULL) {
+				memcpy((void *)(dev->_audiodata_buf_virt_addr +
+						frame_offset / 4), mybuf,
+					vfs_read_retval);
+			}
+
+			file_offset += vfs_read_retval;
+			frame_offset += vfs_read_retval;
+
+			if (vfs_read_retval < line_size) {
+				pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
+					__func__);
+				break;
+			}
+		}
+
+		if (i > 0)
+			dev->_audioframe_count++;
+
+		dev->_audiofile_status = (vfs_read_retval == line_size) ?
+						IN_PROGRESS : END_OF_FILE;
+
+		set_fs(old_fs);
+		filp_close(myfile, NULL);
+	}
+
+	return 0;
+}
+
+static void cx25821_audioups_handler(struct work_struct *work)
+{
+	struct cx25821_dev *dev = container_of(work, struct cx25821_dev,
+			_audio_work_entry);
+
+	if (!dev) {
+		pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n",
+			__func__);
+		return;
+	}
+
+	cx25821_get_audio_data(dev, dev->channels[dev->_audio_upstream_channel].
+			sram_channels);
+}
+
+int cx25821_openfile_audio(struct cx25821_dev *dev,
+			   struct sram_channel *sram_ch)
+{
+	struct file *myfile;
+	int i = 0, j = 0;
+	int line_size = AUDIO_LINE_SIZE;
+	ssize_t vfs_read_retval = 0;
+	char mybuf[line_size];
+	loff_t pos;
+	loff_t offset = (unsigned long)0;
+	mm_segment_t old_fs;
+
+	myfile = filp_open(dev->_audiofilename, O_RDONLY | O_LARGEFILE, 0);
+
+	if (IS_ERR(myfile)) {
+		const int open_errno = -PTR_ERR(myfile);
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
+			__func__, dev->_audiofilename, open_errno);
+		return PTR_ERR(myfile);
+	} else {
+		if (!(myfile->f_op)) {
+			pr_err("%s(): File has no file operations registered!\n",
+				__func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		if (!myfile->f_op->read) {
+			pr_err("%s(): File has no READ operations registered!\n",
+				__func__);
+			filp_close(myfile, NULL);
+			return -EIO;
+		}
+
+		pos = myfile->f_pos;
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+
+		for (j = 0; j < NUM_AUDIO_FRAMES; j++) {
+			for (i = 0; i < dev->_audio_lines_count; i++) {
+				pos = offset;
+
+				vfs_read_retval = vfs_read(myfile, mybuf,
+						line_size, &pos);
+
+				if (vfs_read_retval > 0 &&
+				    vfs_read_retval == line_size &&
+				    dev->_audiodata_buf_virt_addr != NULL) {
+					memcpy((void *)(dev->
+							_audiodata_buf_virt_addr
+							+ offset / 4), mybuf,
+					       vfs_read_retval);
+				}
+
+				offset += vfs_read_retval;
+
+				if (vfs_read_retval < line_size) {
+					pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
+						__func__);
+					break;
+				}
+			}
+
+			if (i > 0)
+				dev->_audioframe_count++;
+
+			if (vfs_read_retval < line_size)
+				break;
+		}
+
+		dev->_audiofile_status = (vfs_read_retval == line_size) ?
+						IN_PROGRESS : END_OF_FILE;
+
+		set_fs(old_fs);
+		myfile->f_pos = 0;
+		filp_close(myfile, NULL);
+	}
+
+	return 0;
+}
+
+static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
+						 struct sram_channel *sram_ch,
+						 int bpl)
+{
+	int ret = 0;
+	dma_addr_t dma_addr;
+	dma_addr_t data_dma_addr;
+
+	cx25821_free_memory_audio(dev);
+
+	dev->_risc_virt_addr = pci_alloc_consistent(dev->pci,
+			dev->audio_upstream_riscbuf_size, &dma_addr);
+	dev->_risc_virt_start_addr = dev->_risc_virt_addr;
+	dev->_risc_phys_start_addr = dma_addr;
+	dev->_risc_phys_addr = dma_addr;
+	dev->_audiorisc_size = dev->audio_upstream_riscbuf_size;
+
+	if (!dev->_risc_virt_addr) {
+		printk(KERN_DEBUG
+			pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning\n"));
+		return -ENOMEM;
+	}
+	/* Clear out memory at address */
+	memset(dev->_risc_virt_addr, 0, dev->_audiorisc_size);
+
+	/* For Audio Data buffer allocation */
+	dev->_audiodata_buf_virt_addr = pci_alloc_consistent(dev->pci,
+			dev->audio_upstream_databuf_size, &data_dma_addr);
+	dev->_audiodata_buf_phys_addr = data_dma_addr;
+	dev->_audiodata_buf_size = dev->audio_upstream_databuf_size;
+
+	if (!dev->_audiodata_buf_virt_addr) {
+		printk(KERN_DEBUG
+			pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning\n"));
+		return -ENOMEM;
+	}
+	/* Clear out memory at address */
+	memset(dev->_audiodata_buf_virt_addr, 0, dev->_audiodata_buf_size);
+
+	ret = cx25821_openfile_audio(dev, sram_ch);
+	if (ret < 0)
+		return ret;
+
+	/* Creating RISC programs */
+	ret = cx25821_risc_buffer_upstream_audio(dev, dev->pci, bpl,
+						dev->_audio_lines_count);
+	if (ret < 0) {
+		printk(KERN_DEBUG
+			pr_fmt("ERROR creating audio upstream RISC programs!\n"));
+		goto error;
+	}
+
+	return 0;
+
+error:
+	return ret;
+}
+
+int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
+			       u32 status)
+{
+	int i = 0;
+	u32 int_msk_tmp;
+	struct sram_channel *channel = dev->channels[chan_num].sram_channels;
+	dma_addr_t risc_phys_jump_addr;
+	__le32 *rp;
+
+	if (status & FLD_AUD_SRC_RISCI1) {
+		/* Get interrupt_index of the program that interrupted */
+		u32 prog_cnt = cx_read(channel->gpcnt);
+
+		/* Since we've identified our IRQ, clear our bits from the
+		 * interrupt mask and interrupt status registers */
+		cx_write(channel->int_msk, 0);
+		cx_write(channel->int_stat, cx_read(channel->int_stat));
+
+		spin_lock(&dev->slock);
+
+		while (prog_cnt != dev->_last_index_irq) {
+			/* Update _last_index_irq */
+			if (dev->_last_index_irq < (NUMBER_OF_PROGRAMS - 1))
+				dev->_last_index_irq++;
+			else
+				dev->_last_index_irq = 0;
+
+			dev->_audioframe_index = dev->_last_index_irq;
+
+			queue_work(dev->_irq_audio_queues,
+				   &dev->_audio_work_entry);
+		}
+
+		if (dev->_is_first_audio_frame) {
+			dev->_is_first_audio_frame = 0;
+
+			if (dev->_risc_virt_start_addr != NULL) {
+				risc_phys_jump_addr =
+					dev->_risc_phys_start_addr +
+					RISC_SYNC_INSTRUCTION_SIZE +
+					AUDIO_RISC_DMA_BUF_SIZE;
+
+				rp = cx25821_risc_field_upstream_audio(dev,
+						dev->_risc_virt_start_addr + 1,
+						dev->_audiodata_buf_phys_addr,
+						AUDIO_LINE_SIZE, FIFO_DISABLE);
+
+				if (USE_RISC_NOOP_AUDIO) {
+					for (i = 0; i < NUM_NO_OPS; i++) {
+						*(rp++) =
+						    cpu_to_le32(RISC_NOOP);
+					}
+				}
+				/* Jump to 2nd Audio Frame */
+				*(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 |
+						RISC_CNT_RESET);
+				*(rp++) = cpu_to_le32(risc_phys_jump_addr);
+				*(rp++) = cpu_to_le32(0);
+			}
+		}
+
+		spin_unlock(&dev->slock);
+	} else {
+		if (status & FLD_AUD_SRC_OF)
+			pr_warn("%s(): Audio Received Overflow Error Interrupt!\n",
+				__func__);
+
+		if (status & FLD_AUD_SRC_SYNC)
+			pr_warn("%s(): Audio Received Sync Error Interrupt!\n",
+				__func__);
+
+		if (status & FLD_AUD_SRC_OPC_ERR)
+			pr_warn("%s(): Audio Received OpCode Error Interrupt!\n",
+				__func__);
+
+		/* Read and write back the interrupt status register to clear
+		 * our bits */
+		cx_write(channel->int_stat, cx_read(channel->int_stat));
+	}
+
+	if (dev->_audiofile_status == END_OF_FILE) {
+		pr_warn("EOF Channel Audio Framecount = %d\n",
+			dev->_audioframe_count);
+		return -1;
+	}
+	/* ElSE, set the interrupt mask register, re-enable irq. */
+	int_msk_tmp = cx_read(channel->int_msk);
+	cx_write(channel->int_msk, int_msk_tmp |= _intr_msk);
+
+	return 0;
+}
+
+static irqreturn_t cx25821_upstream_irq_audio(int irq, void *dev_id)
+{
+	struct cx25821_dev *dev = dev_id;
+	u32 audio_status;
+	int handled = 0;
+	struct sram_channel *sram_ch;
+
+	if (!dev)
+		return -1;
+
+	sram_ch = dev->channels[dev->_audio_upstream_channel].sram_channels;
+
+	audio_status = cx_read(sram_ch->int_stat);
+
+	/* Only deal with our interrupt */
+	if (audio_status) {
+		handled = cx25821_audio_upstream_irq(dev,
+				dev->_audio_upstream_channel, audio_status);
+	}
+
+	if (handled < 0)
+		cx25821_stop_upstream_audio(dev);
+	else
+		handled += handled;
+
+	return IRQ_RETVAL(handled);
+}
+
+static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
+				     struct sram_channel *sram_ch)
+{
+	int count = 0;
+	u32 tmp;
+
+	do {
+		/* Wait 10 microsecond before checking to see if the FIFO is
+		 * turned ON. */
+		udelay(10);
+
+		tmp = cx_read(sram_ch->dma_ctl);
+
+		/* 10 millisecond timeout */
+		if (count++ > 1000) {
+			pr_err("ERROR: %s() fifo is NOT turned on. Timeout!\n",
+				__func__);
+			return;
+		}
+
+	} while (!(tmp & sram_ch->fld_aud_fifo_en));
+
+}
+
+int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
+				     struct sram_channel *sram_ch)
+{
+	u32 tmp = 0;
+	int err = 0;
+
+	/* Set the physical start address of the RISC program in the initial
+	 * program counter(IPC) member of the CMDS. */
+	cx_write(sram_ch->cmds_start + 0, dev->_risc_phys_addr);
+	/* Risc IPC High 64 bits 63-32 */
+	cx_write(sram_ch->cmds_start + 4, 0);
+
+	/* reset counter */
+	cx_write(sram_ch->gpcnt_ctl, 3);
+
+	/* Set the line length       (It looks like we do not need to set the
+	 * line length) */
+	cx_write(sram_ch->aud_length, AUDIO_LINE_SIZE & FLD_AUD_DST_LN_LNGTH);
+
+	/* Set the input mode to 16-bit */
+	tmp = cx_read(sram_ch->aud_cfg);
+	tmp |= FLD_AUD_SRC_ENABLE | FLD_AUD_DST_PK_MODE | FLD_AUD_CLK_ENABLE |
+		FLD_AUD_MASTER_MODE | FLD_AUD_CLK_SELECT_PLL_D |
+		FLD_AUD_SONY_MODE;
+	cx_write(sram_ch->aud_cfg, tmp);
+
+	/* Read and write back the interrupt status register to clear it */
+	tmp = cx_read(sram_ch->int_stat);
+	cx_write(sram_ch->int_stat, tmp);
+
+	/* Clear our bits from the interrupt status register. */
+	cx_write(sram_ch->int_stat, _intr_msk);
+
+	/* Set the interrupt mask register, enable irq. */
+	cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit));
+	tmp = cx_read(sram_ch->int_msk);
+	cx_write(sram_ch->int_msk, tmp |= _intr_msk);
+
+	err = request_irq(dev->pci->irq, cx25821_upstream_irq_audio,
+			IRQF_SHARED, dev->name, dev);
+	if (err < 0) {
+		pr_err("%s: can't get upstream IRQ %d\n", dev->name,
+				dev->pci->irq);
+		goto fail_irq;
+	}
+
+	/* Start the DMA  engine */
+	tmp = cx_read(sram_ch->dma_ctl);
+	cx_set(sram_ch->dma_ctl, tmp | sram_ch->fld_aud_risc_en);
+
+	dev->_audio_is_running = 1;
+	dev->_is_first_audio_frame = 1;
+
+	/* The fifo_en bit turns on by the first Risc program */
+	cx25821_wait_fifo_enable(dev, sram_ch);
+
+	return 0;
+
+fail_irq:
+	cx25821_dev_unregister(dev);
+	return err;
+}
+
+int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
+{
+	struct sram_channel *sram_ch;
+	int retval = 0;
+	int err = 0;
+	int str_length = 0;
+
+	if (dev->_audio_is_running) {
+		pr_warn("Audio Channel is still running so return!\n");
+		return 0;
+	}
+
+	dev->_audio_upstream_channel = channel_select;
+	sram_ch = dev->channels[channel_select].sram_channels;
+
+	/* Work queue */
+	INIT_WORK(&dev->_audio_work_entry, cx25821_audioups_handler);
+	dev->_irq_audio_queues =
+	    create_singlethread_workqueue("cx25821_audioworkqueue");
+
+	if (!dev->_irq_audio_queues) {
+		printk(KERN_DEBUG
+			pr_fmt("ERROR: create_singlethread_workqueue() for Audio FAILED!\n"));
+		return -ENOMEM;
+	}
+
+	dev->_last_index_irq = 0;
+	dev->_audio_is_running = 0;
+	dev->_audioframe_count = 0;
+	dev->_audiofile_status = RESET_STATUS;
+	dev->_audio_lines_count = LINES_PER_AUDIO_BUFFER;
+	_line_size = AUDIO_LINE_SIZE;
+
+	if (dev->input_audiofilename) {
+		str_length = strlen(dev->input_audiofilename);
+		dev->_audiofilename = kmemdup(dev->input_audiofilename,
+					      str_length + 1, GFP_KERNEL);
+
+		if (!dev->_audiofilename)
+			goto error;
+
+		/* Default if filename is empty string */
+		if (strcmp(dev->input_audiofilename, "") == 0)
+			dev->_audiofilename = "/root/audioGOOD.wav";
+	} else {
+		str_length = strlen(_defaultAudioName);
+		dev->_audiofilename = kmemdup(_defaultAudioName,
+					      str_length + 1, GFP_KERNEL);
+
+		if (!dev->_audiofilename)
+			goto error;
+	}
+
+	retval = cx25821_sram_channel_setup_upstream_audio(dev, sram_ch,
+							_line_size, 0);
+
+	dev->audio_upstream_riscbuf_size =
+		AUDIO_RISC_DMA_BUF_SIZE * NUM_AUDIO_PROGS +
+		RISC_SYNC_INSTRUCTION_SIZE;
+	dev->audio_upstream_databuf_size = AUDIO_DATA_BUF_SZ * NUM_AUDIO_PROGS;
+
+	/* Allocating buffers and prepare RISC program */
+	retval = cx25821_audio_upstream_buffer_prepare(dev, sram_ch,
+							_line_size);
+	if (retval < 0) {
+		pr_err("%s: Failed to set up Audio upstream buffers!\n",
+			dev->name);
+		goto error;
+	}
+	/* Start RISC engine */
+	cx25821_start_audio_dma_upstream(dev, sram_ch);
+
+	return 0;
+
+error:
+	cx25821_dev_unregister(dev);
+
+	return err;
+}