summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c')
-rw-r--r--drivers/media/i2c/Kconfig16
-rw-r--r--drivers/media/i2c/Makefile1
-rw-r--r--drivers/media/i2c/ad9389b.c2
-rw-r--r--drivers/media/i2c/adv7180.c118
-rw-r--r--drivers/media/i2c/adv7511.c2
-rw-r--r--drivers/media/i2c/adv7604.c4
-rw-r--r--drivers/media/i2c/adv7842.c153
-rw-r--r--drivers/media/i2c/ir-kbd-i2c.c4
-rw-r--r--drivers/media/i2c/lm3560.c22
-rw-r--r--drivers/media/i2c/lm3646.c414
-rw-r--r--drivers/media/i2c/mt9p031.c49
-rw-r--r--drivers/media/i2c/mt9t001.c229
-rw-r--r--drivers/media/i2c/mt9v011.c4
-rw-r--r--drivers/media/i2c/mt9v032.c10
-rw-r--r--drivers/media/i2c/sr030pc30.c2
-rw-r--r--drivers/media/i2c/ths8200.c26
-rw-r--r--drivers/media/i2c/tvp5150.c8
17 files changed, 890 insertions, 174 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 4aa9c53..c930be3 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -196,7 +196,7 @@ config VIDEO_ADV7183
config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
---help---
Support for the Analog Devices ADV7604 video decoder.
@@ -208,7 +208,7 @@ config VIDEO_ADV7604
config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
---help---
Support for the Analog Devices ADV7842 video decoder.
@@ -431,7 +431,7 @@ config VIDEO_ADV7393
config VIDEO_ADV7511
tristate "Analog Devices ADV7511 encoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
---help---
Support for the Analog Devices ADV7511 video encoder.
@@ -629,6 +629,15 @@ config VIDEO_LM3560
This is a driver for the lm3560 dual flash controllers. It controls
flash, torch LEDs.
+config VIDEO_LM3646
+ tristate "LM3646 dual flash driver support"
+ depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on MEDIA_CAMERA_SUPPORT
+ select REGMAP_I2C
+ ---help---
+ This is a driver for the lm3646 dual flash controllers. It controls
+ flash, torch LEDs.
+
comment "Video improvement chips"
config VIDEO_UPD64031A
@@ -659,6 +668,7 @@ comment "Audio/Video compression chips"
config VIDEO_SAA6752HS
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
depends on VIDEO_V4L2 && I2C
+ select CRC32
---help---
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer.
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 48888ae..01b6bfc 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
obj-$(CONFIG_VIDEO_AS3645A) += as3645a.o
obj-$(CONFIG_VIDEO_LM3560) += lm3560.o
+obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
diff --git a/drivers/media/i2c/ad9389b.c b/drivers/media/i2c/ad9389b.c
index 83225d6..1b7ecfd 100644
--- a/drivers/media/i2c/ad9389b.c
+++ b/drivers/media/i2c/ad9389b.c
@@ -573,7 +573,7 @@ static const struct v4l2_subdev_core_ops ad9389b_core_ops = {
/* ------------------------------ PAD OPS ------------------------------ */
-static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+static int ad9389b_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct ad9389b_state *state = get_ad9389b_state(sd);
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index d7d99f1..5e638b1 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -123,11 +123,11 @@
struct adv7180_state {
struct v4l2_ctrl_handler ctrl_hdl;
struct v4l2_subdev sd;
- struct work_struct work;
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
v4l2_std_id curr_norm;
bool autodetect;
+ bool powered;
u8 input;
};
#define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler, \
@@ -312,6 +312,37 @@ out:
return ret;
}
+static int adv7180_set_power(struct adv7180_state *state,
+ struct i2c_client *client, bool on)
+{
+ u8 val;
+
+ if (on)
+ val = ADV7180_PWR_MAN_ON;
+ else
+ val = ADV7180_PWR_MAN_OFF;
+
+ return i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG, val);
+}
+
+static int adv7180_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct adv7180_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+ ret = mutex_lock_interruptible(&state->mutex);
+ if (ret)
+ return ret;
+
+ ret = adv7180_set_power(state, client, on);
+ if (ret == 0)
+ state->powered = on;
+
+ mutex_unlock(&state->mutex);
+ return ret;
+}
+
static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
@@ -442,6 +473,7 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = {
static const struct v4l2_subdev_core_ops adv7180_core_ops = {
.s_std = adv7180_s_std,
+ .s_power = adv7180_s_power,
};
static const struct v4l2_subdev_ops adv7180_ops = {
@@ -449,10 +481,9 @@ static const struct v4l2_subdev_ops adv7180_ops = {
.video = &adv7180_video_ops,
};
-static void adv7180_work(struct work_struct *work)
+static irqreturn_t adv7180_irq(int irq, void *devid)
{
- struct adv7180_state *state = container_of(work, struct adv7180_state,
- work);
+ struct adv7180_state *state = devid;
struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
u8 isr3;
@@ -468,17 +499,6 @@ static void adv7180_work(struct work_struct *work)
__adv7180_status(client, NULL, &state->curr_norm);
mutex_unlock(&state->mutex);
- enable_irq(state->irq);
-}
-
-static irqreturn_t adv7180_irq(int irq, void *devid)
-{
- struct adv7180_state *state = devid;
-
- schedule_work(&state->work);
-
- disable_irq_nosync(state->irq);
-
return IRQ_HANDLED;
}
@@ -533,48 +553,52 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state)
/* register for interrupts */
if (state->irq > 0) {
- ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
- state);
+ ret = request_threaded_irq(state->irq, NULL, adv7180_irq,
+ IRQF_ONESHOT, KBUILD_MODNAME, state);
if (ret)
return ret;
ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
ADV7180_ADI_CTRL_IRQ_SPACE);
if (ret < 0)
- return ret;
+ goto err;
/* config the Interrupt pin to be active low */
ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
ADV7180_ICONF1_ACTIVE_LOW |
ADV7180_ICONF1_PSYNC_ONLY);
if (ret < 0)
- return ret;
+ goto err;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
if (ret < 0)
- return ret;
+ goto err;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
if (ret < 0)
- return ret;
+ goto err;
/* enable AD change interrupts interrupts */
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
ADV7180_IRQ3_AD_CHANGE);
if (ret < 0)
- return ret;
+ goto err;
ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
if (ret < 0)
- return ret;
+ goto err;
ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
0);
if (ret < 0)
- return ret;
+ goto err;
}
return 0;
+
+err:
+ free_irq(state->irq, state);
+ return ret;
}
static int adv7180_probe(struct i2c_client *client,
@@ -598,9 +622,9 @@ static int adv7180_probe(struct i2c_client *client,
}
state->irq = client->irq;
- INIT_WORK(&state->work, adv7180_work);
mutex_init(&state->mutex);
state->autodetect = true;
+ state->powered = true;
state->input = 0;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
@@ -611,15 +635,21 @@ static int adv7180_probe(struct i2c_client *client,
ret = init_device(client, state);
if (ret)
goto err_free_ctrl;
+
+ ret = v4l2_async_register_subdev(sd);
+ if (ret)
+ goto err_free_irq;
+
return 0;
+err_free_irq:
+ if (state->irq > 0)
+ free_irq(client->irq, state);
err_free_ctrl:
adv7180_exit_controls(state);
err_unreg_subdev:
mutex_destroy(&state->mutex);
- v4l2_device_unregister_subdev(sd);
err:
- printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
return ret;
}
@@ -628,20 +658,14 @@ static int adv7180_remove(struct i2c_client *client)
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct adv7180_state *state = to_state(sd);
- if (state->irq > 0) {
+ v4l2_async_unregister_subdev(sd);
+
+ if (state->irq > 0)
free_irq(client->irq, state);
- if (cancel_work_sync(&state->work)) {
- /*
- * Work was pending, therefore we need to enable
- * IRQ here to balance the disable_irq() done in the
- * interrupt handler.
- */
- enable_irq(state->irq);
- }
- }
- mutex_destroy(&state->mutex);
v4l2_device_unregister_subdev(sd);
+ adv7180_exit_controls(state);
+ mutex_destroy(&state->mutex);
return 0;
}
@@ -654,13 +678,10 @@ static const struct i2c_device_id adv7180_id[] = {
static int adv7180_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
- int ret;
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct adv7180_state *state = to_state(sd);
- ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
- ADV7180_PWR_MAN_OFF);
- if (ret < 0)
- return ret;
- return 0;
+ return adv7180_set_power(state, client, false);
}
static int adv7180_resume(struct device *dev)
@@ -670,10 +691,11 @@ static int adv7180_resume(struct device *dev)
struct adv7180_state *state = to_state(sd);
int ret;
- ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
- ADV7180_PWR_MAN_ON);
- if (ret < 0)
- return ret;
+ if (state->powered) {
+ ret = adv7180_set_power(state, client, true);
+ if (ret)
+ return ret;
+ }
ret = init_device(client, state);
if (ret < 0)
return ret;
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
index ee61894..942ca4b 100644
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -597,7 +597,7 @@ static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
return 0;
}
-static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+static int adv7511_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv7511_state *state = get_adv7511_state(sd);
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 71c8570..98cc540 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1658,7 +1658,7 @@ static int adv7604_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
return 0;
}
-static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+static int adv7604_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv7604_state *state = to_state(sd);
u8 *data = NULL;
@@ -1728,7 +1728,7 @@ static int get_edid_spa_location(const u8 *edid)
return -1;
}
-static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+static int adv7604_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv7604_state *state = to_state(sd);
int spa_loc;
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 9bbd665..636ac08 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -546,6 +546,14 @@ static void main_reset(struct v4l2_subdev *sd)
/* ----------------------------------------------------------------------- */
+static inline bool is_analog_input(struct v4l2_subdev *sd)
+{
+ struct adv7842_state *state = to_state(sd);
+
+ return ((state->mode == ADV7842_MODE_RGB) ||
+ (state->mode == ADV7842_MODE_COMP));
+}
+
static inline bool is_digital_input(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
@@ -1027,12 +1035,72 @@ static void configure_custom_video_timings(struct v4l2_subdev *sd,
cp_write(sd, 0xac, (height & 0x0f) << 4);
}
+static void adv7842_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
+{
+ struct adv7842_state *state = to_state(sd);
+ u8 offset_buf[4];
+
+ if (auto_offset) {
+ offset_a = 0x3ff;
+ offset_b = 0x3ff;
+ offset_c = 0x3ff;
+ }
+
+ v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
+ __func__, auto_offset ? "Auto" : "Manual",
+ offset_a, offset_b, offset_c);
+
+ offset_buf[0]= (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
+ offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
+ offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
+ offset_buf[3] = offset_c & 0x0ff;
+
+ /* Registers must be written in this order with no i2c access in between */
+ if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x77, 4, offset_buf))
+ v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
+}
+
+static void adv7842_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
+{
+ struct adv7842_state *state = to_state(sd);
+ u8 gain_buf[4];
+ u8 gain_man = 1;
+ u8 agc_mode_man = 1;
+
+ if (auto_gain) {
+ gain_man = 0;
+ agc_mode_man = 0;
+ gain_a = 0x100;
+ gain_b = 0x100;
+ gain_c = 0x100;
+ }
+
+ v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
+ __func__, auto_gain ? "Auto" : "Manual",
+ gain_a, gain_b, gain_c);
+
+ gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
+ gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
+ gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
+ gain_buf[3] = ((gain_c & 0x0ff));
+
+ /* Registers must be written in this order with no i2c access in between */
+ if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x73, 4, gain_buf))
+ v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
+}
+
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
{
struct adv7842_state *state = to_state(sd);
+ bool rgb_output = io_read(sd, 0x02) & 0x02;
+ bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
+
+ v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
+ __func__, state->rgb_quantization_range,
+ rgb_output, hdmi_signal);
- v4l2_dbg(2, debug, sd, "%s: rgb_quantization_range = %d\n",
- __func__, state->rgb_quantization_range);
+ adv7842_set_gain(sd, true, 0x0, 0x0, 0x0);
+ adv7842_set_offset(sd, true, 0x0, 0x0, 0x0);
switch (state->rgb_quantization_range) {
case V4L2_DV_RGB_RANGE_AUTO:
@@ -1050,7 +1118,7 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
break;
}
- if (hdmi_read(sd, 0x05) & 0x80) {
+ if (hdmi_signal) {
/* Receiving HDMI signal
* Set automode */
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
@@ -1066,24 +1134,45 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd)
} else {
/* RGB full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x10);
+
+ if (is_digital_input(sd) && rgb_output) {
+ adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
+ } else {
+ adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
+ adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
+ }
}
break;
case V4L2_DV_RGB_RANGE_LIMITED:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb limited range (16-235) */
io_write_and_or(sd, 0x02, 0x0f, 0x20);
- } else {
- /* RGB limited range (16-235) */
- io_write_and_or(sd, 0x02, 0x0f, 0x00);
+ break;
}
+
+ /* RGB limited range (16-235) */
+ io_write_and_or(sd, 0x02, 0x0f, 0x00);
+
break;
case V4L2_DV_RGB_RANGE_FULL:
if (state->mode == ADV7842_MODE_COMP) {
/* YCrCb full range (0-255) */
io_write_and_or(sd, 0x02, 0x0f, 0x60);
+ break;
+ }
+
+ /* RGB full range (0-255) */
+ io_write_and_or(sd, 0x02, 0x0f, 0x10);
+
+ if (is_analog_input(sd) || hdmi_signal)
+ break;
+
+ /* Adjust gain/offset for DVI-D signals only */
+ if (rgb_output) {
+ adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
} else {
- /* RGB full range (0-255) */
- io_write_and_or(sd, 0x02, 0x0f, 0x10);
+ adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
+ adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
}
break;
}
@@ -1360,12 +1449,11 @@ static int adv7842_query_dv_timings(struct v4l2_subdev *sd,
bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08);
bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a);
- freq = (hdmi_read(sd, 0x06) * 1000000) +
- ((hdmi_read(sd, 0x3b) & 0x30) >> 4) * 250000;
-
+ freq = ((hdmi_read(sd, 0x51) << 1) + (hdmi_read(sd, 0x52) >> 7)) * 1000000;
+ freq += ((hdmi_read(sd, 0x52) & 0x7f) * 7813);
if (is_hdmi(sd)) {
/* adjust for deep color mode */
- freq = freq * 8 / (((hdmi_read(sd, 0x0b) & 0xc0) >> 5) + 8);
+ freq = freq * 8 / (((hdmi_read(sd, 0x0b) & 0xc0) >> 6) * 2 + 8);
}
bt->pixelclock = freq;
bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 +
@@ -1717,8 +1805,8 @@ static void select_input(struct v4l2_subdev *sd,
* (rev. 2.5, June 2010)" p. 17. */
afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */
afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */
- cp_write(sd, 0x3e, 0x80); /* CP core pre-gain control,
- enable color control */
+ cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
+
/* CP coast control */
cp_write(sd, 0xc3, 0x33); /* Component mode */
@@ -1926,7 +2014,7 @@ static int adv7842_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
return 0;
}
-static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid)
+static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv7842_state *state = to_state(sd);
u8 *data = NULL;
@@ -1966,7 +2054,7 @@ static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edi
return 0;
}
-static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_subdev_edid *e)
+static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
{
struct adv7842_state *state = to_state(sd);
int err = 0;
@@ -2103,7 +2191,8 @@ static void print_avi_infoframe(struct v4l2_subdev *sd)
{
int i;
uint8_t buf[14];
- uint8_t avi_inf_len;
+ u8 avi_len;
+ u8 avi_ver;
struct avi_info_frame avi;
if (!(hdmi_read(sd, 0x05) & 0x80)) {
@@ -2116,18 +2205,20 @@ static void print_avi_infoframe(struct v4l2_subdev *sd)
}
if (io_read(sd, 0x88) & 0x10) {
- /* Note: the ADV7842 calculated incorrect checksums for InfoFrames
- with a length of 14 or 15. See the ADV7842 Register Settings
- Recommendations document for more details. */
- v4l2_info(sd, "AVI infoframe checksum error\n");
- return;
+ v4l2_info(sd, "AVI infoframe checksum error has occurred earlier\n");
+ io_write(sd, 0x8a, 0x10); /* clear AVI_INF_CKS_ERR_RAW */
+ if (io_read(sd, 0x88) & 0x10) {
+ v4l2_info(sd, "AVI infoframe checksum error still present\n");
+ io_write(sd, 0x8a, 0x10); /* clear AVI_INF_CKS_ERR_RAW */
+ }
}
- avi_inf_len = infoframe_read(sd, 0xe2);
+ avi_len = infoframe_read(sd, 0xe2);
+ avi_ver = infoframe_read(sd, 0xe1);
v4l2_info(sd, "AVI infoframe version %d (%d byte)\n",
- infoframe_read(sd, 0xe1), avi_inf_len);
+ avi_ver, avi_len);
- if (infoframe_read(sd, 0xe1) != 0x02)
+ if (avi_ver != 0x02)
return;
for (i = 0; i < 14; i++)
@@ -2602,9 +2693,15 @@ static int adv7842_core_init(struct v4l2_subdev *sd)
/* disable I2C access to internal EDID ram from HDMI DDC ports */
rep_write_and_or(sd, 0x77, 0xf3, 0x00);
- hdmi_write(sd, 0x69, 0xa3); /* HPA manual */
- /* HPA disable on port A and B */
- io_write_and_or(sd, 0x20, 0xcf, 0x00);
+ if (pdata->hpa_auto) {
+ /* HPA auto, HPA 0.5s after Edid set and Cable detect */
+ hdmi_write(sd, 0x69, 0x5c);
+ } else {
+ /* HPA manual */
+ hdmi_write(sd, 0x69, 0xa3);
+ /* HPA disable on port A and B */
+ io_write_and_or(sd, 0x20, 0xcf, 0x00);
+ }
/* LLC */
io_write(sd, 0x19, 0x80 | pdata->llc_dll_phase);
diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c
index 99ee456..c8fe135 100644
--- a/drivers/media/i2c/ir-kbd-i2c.c
+++ b/drivers/media/i2c/ir-kbd-i2c.c
@@ -431,8 +431,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
* Initialize the other fields of rc_dev
*/
rc->map_name = ir->ir_codes;
- rc->allowed_protos = rc_type;
- rc->enabled_protocols = rc_type;
+ rc_set_allowed_protocols(rc, rc_type);
+ rc_set_enabled_protocols(rc, rc_type);
if (!rc->driver_name)
rc->driver_name = MODULE_NAME;
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index d98ca3a..c23de59 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -15,12 +15,6 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
*/
#include <linux/delay.h>
@@ -42,7 +36,7 @@
#define REG_FLAG 0xd0
#define REG_CONFIG1 0xe0
-/* Fault Mask */
+/* fault mask */
#define FAULT_TIMEOUT (1<<0)
#define FAULT_OVERTEMP (1<<1)
#define FAULT_SHORT_CIRCUIT (1<<2)
@@ -53,7 +47,8 @@ enum led_enable {
MODE_FLASH = 0x3,
};
-/* struct lm3560_flash
+/**
+ * struct lm3560_flash
*
* @pdata: platform data
* @regmap: reg. map for i2c
@@ -98,7 +93,7 @@ static int lm3560_mode_ctrl(struct lm3560_flash *flash)
return rval;
}
-/* led1/2 enable/disable */
+/* led1/2 enable/disable */
static int lm3560_enable_ctrl(struct lm3560_flash *flash,
enum lm3560_led_id led_no, bool on)
{
@@ -168,7 +163,7 @@ static int lm3560_flash_brt_ctrl(struct lm3560_flash *flash,
return rval;
}
-/* V4L2 controls */
+/* v4l2 controls */
static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum lm3560_led_id led_no)
{
struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
@@ -297,6 +292,7 @@ static int lm3560_init_controls(struct lm3560_flash *flash,
const struct v4l2_ctrl_ops *ops = &lm3560_led_ctrl_ops[led_no];
v4l2_ctrl_handler_init(hdl, 8);
+
/* flash mode */
v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
V4L2_FLASH_LED_MODE_TORCH, ~0x7,
@@ -309,6 +305,7 @@ static int lm3560_init_controls(struct lm3560_flash *flash,
/* flash strobe */
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+
/* flash strobe stop */
v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
@@ -395,7 +392,7 @@ static int lm3560_init_device(struct lm3560_flash *flash)
rval = lm3560_mode_ctrl(flash);
if (rval < 0)
return rval;
- /* Reset faults */
+ /* reset faults */
rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
return rval;
}
@@ -419,8 +416,7 @@ static int lm3560_probe(struct i2c_client *client,
/* if there is no platform data, use chip default value */
if (pdata == NULL) {
- pdata =
- kzalloc(sizeof(struct lm3560_platform_data), GFP_KERNEL);
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
if (pdata == NULL)
return -ENODEV;
pdata->peak = LM3560_PEAK_3600mA;
diff --git a/drivers/media/i2c/lm3646.c b/drivers/media/i2c/lm3646.c
new file mode 100644
index 0000000..626fb46
--- /dev/null
+++ b/drivers/media/i2c/lm3646.c
@@ -0,0 +1,414 @@
+/*
+ * drivers/media/i2c/lm3646.c
+ * General device driver for TI lm3646, Dual FLASH LED Driver
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Contact: Daniel Jeong <gshark.jeong@gmail.com>
+ * Ldd-Mlp <ldd-mlp@list.ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <media/lm3646.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+
+/* registers definitions */
+#define REG_ENABLE 0x01
+#define REG_TORCH_BR 0x05
+#define REG_FLASH_BR 0x05
+#define REG_FLASH_TOUT 0x04
+#define REG_FLAG 0x08
+#define REG_STROBE_SRC 0x06
+#define REG_LED1_FLASH_BR 0x06
+#define REG_LED1_TORCH_BR 0x07
+
+#define MASK_ENABLE 0x03
+#define MASK_TORCH_BR 0x70
+#define MASK_FLASH_BR 0x0F
+#define MASK_FLASH_TOUT 0x07
+#define MASK_FLAG 0xFF
+#define MASK_STROBE_SRC 0x80
+
+/* Fault Mask */
+#define FAULT_TIMEOUT (1<<0)
+#define FAULT_SHORT_CIRCUIT (1<<1)
+#define FAULT_UVLO (1<<2)
+#define FAULT_IVFM (1<<3)
+#define FAULT_OCP (1<<4)
+#define FAULT_OVERTEMP (1<<5)
+#define FAULT_NTC_TRIP (1<<6)
+#define FAULT_OVP (1<<7)
+
+enum led_mode {
+ MODE_SHDN = 0x0,
+ MODE_TORCH = 0x2,
+ MODE_FLASH = 0x3,
+};
+
+/*
+ * struct lm3646_flash
+ *
+ * @pdata: platform data
+ * @regmap: reg. map for i2c
+ * @lock: muxtex for serial access.
+ * @led_mode: V4L2 LED mode
+ * @ctrls_led: V4L2 contols
+ * @subdev_led: V4L2 subdev
+ * @mode_reg : mode register value
+ */
+struct lm3646_flash {
+ struct device *dev;
+ struct lm3646_platform_data *pdata;
+ struct regmap *regmap;
+
+ struct v4l2_ctrl_handler ctrls_led;
+ struct v4l2_subdev subdev_led;
+
+ u8 mode_reg;
+};
+
+#define to_lm3646_flash(_ctrl) \
+ container_of(_ctrl->handler, struct lm3646_flash, ctrls_led)
+
+/* enable mode control */
+static int lm3646_mode_ctrl(struct lm3646_flash *flash,
+ enum v4l2_flash_led_mode led_mode)
+{
+ switch (led_mode) {
+ case V4L2_FLASH_LED_MODE_NONE:
+ return regmap_write(flash->regmap,
+ REG_ENABLE, flash->mode_reg | MODE_SHDN);
+ case V4L2_FLASH_LED_MODE_TORCH:
+ return regmap_write(flash->regmap,
+ REG_ENABLE, flash->mode_reg | MODE_TORCH);
+ case V4L2_FLASH_LED_MODE_FLASH:
+ return regmap_write(flash->regmap,
+ REG_ENABLE, flash->mode_reg | MODE_FLASH);
+ }
+ return -EINVAL;
+}
+
+/* V4L2 controls */
+static int lm3646_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct lm3646_flash *flash = to_lm3646_flash(ctrl);
+ unsigned int reg_val;
+ int rval;
+
+ if (ctrl->id != V4L2_CID_FLASH_FAULT)
+ return -EINVAL;
+
+ rval = regmap_read(flash->regmap, REG_FLAG, &reg_val);
+ if (rval < 0)
+ return rval;
+
+ ctrl->val = 0;
+ if (reg_val & FAULT_TIMEOUT)
+ ctrl->val |= V4L2_FLASH_FAULT_TIMEOUT;
+ if (reg_val & FAULT_SHORT_CIRCUIT)
+ ctrl->val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+ if (reg_val & FAULT_UVLO)
+ ctrl->val |= V4L2_FLASH_FAULT_UNDER_VOLTAGE;
+ if (reg_val & FAULT_IVFM)
+ ctrl->val |= V4L2_FLASH_FAULT_INPUT_VOLTAGE;
+ if (reg_val & FAULT_OCP)
+ ctrl->val |= V4L2_FLASH_FAULT_OVER_CURRENT;
+ if (reg_val & FAULT_OVERTEMP)
+ ctrl->val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+ if (reg_val & FAULT_NTC_TRIP)
+ ctrl->val |= V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE;
+ if (reg_val & FAULT_OVP)
+ ctrl->val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
+
+ return 0;
+}
+
+static int lm3646_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct lm3646_flash *flash = to_lm3646_flash(ctrl);
+ unsigned int reg_val;
+ int rval = -EINVAL;
+
+ switch (ctrl->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+
+ if (ctrl->val != V4L2_FLASH_LED_MODE_FLASH)
+ return lm3646_mode_ctrl(flash, ctrl->val);
+ /* switch to SHDN mode before flash strobe on */
+ return lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
+
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ return regmap_update_bits(flash->regmap,
+ REG_STROBE_SRC, MASK_STROBE_SRC,
+ (ctrl->val) << 7);
+
+ case V4L2_CID_FLASH_STROBE:
+
+ /* read and check current mode of chip to start flash */
+ rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
+ if (rval < 0 || ((reg_val & MASK_ENABLE) != MODE_SHDN))
+ return rval;
+ /* flash on */
+ return lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_FLASH);
+
+ case V4L2_CID_FLASH_STROBE_STOP:
+
+ /*
+ * flash mode will be turned automatically
+ * from FLASH mode to SHDN mode after flash duration timeout
+ * read and check current mode of chip to stop flash
+ */
+ rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
+ if (rval < 0)
+ return rval;
+ if ((reg_val & MASK_ENABLE) == MODE_FLASH)
+ return lm3646_mode_ctrl(flash,
+ V4L2_FLASH_LED_MODE_NONE);
+ return rval;
+
+ case V4L2_CID_FLASH_TIMEOUT:
+ return regmap_update_bits(flash->regmap,
+ REG_FLASH_TOUT, MASK_FLASH_TOUT,
+ LM3646_FLASH_TOUT_ms_TO_REG
+ (ctrl->val));
+
+ case V4L2_CID_FLASH_INTENSITY:
+ return regmap_update_bits(flash->regmap,
+ REG_FLASH_BR, MASK_FLASH_BR,
+ LM3646_TOTAL_FLASH_BRT_uA_TO_REG
+ (ctrl->val));
+
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ return regmap_update_bits(flash->regmap,
+ REG_TORCH_BR, MASK_TORCH_BR,
+ LM3646_TOTAL_TORCH_BRT_uA_TO_REG
+ (ctrl->val) << 4);
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops lm3646_led_ctrl_ops = {
+ .g_volatile_ctrl = lm3646_get_ctrl,
+ .s_ctrl = lm3646_set_ctrl,
+};
+
+static int lm3646_init_controls(struct lm3646_flash *flash)
+{
+ struct v4l2_ctrl *fault;
+ struct v4l2_ctrl_handler *hdl = &flash->ctrls_led;
+ const struct v4l2_ctrl_ops *ops = &lm3646_led_ctrl_ops;
+
+ v4l2_ctrl_handler_init(hdl, 8);
+ /* flash mode */
+ v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_LED_MODE,
+ V4L2_FLASH_LED_MODE_TORCH, ~0x7,
+ V4L2_FLASH_LED_MODE_NONE);
+
+ /* flash source */
+ v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_FLASH_STROBE_SOURCE,
+ 0x1, ~0x3, V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
+
+ /* flash strobe */
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+ /* flash strobe stop */
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+
+ /* flash strobe timeout */
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TIMEOUT,
+ LM3646_FLASH_TOUT_MIN,
+ LM3646_FLASH_TOUT_MAX,
+ LM3646_FLASH_TOUT_STEP, flash->pdata->flash_timeout);
+
+ /* max flash current */
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_INTENSITY,
+ LM3646_TOTAL_FLASH_BRT_MIN,
+ LM3646_TOTAL_FLASH_BRT_MAX,
+ LM3646_TOTAL_FLASH_BRT_STEP,
+ LM3646_TOTAL_FLASH_BRT_MAX);
+
+ /* max torch current */
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_TORCH_INTENSITY,
+ LM3646_TOTAL_TORCH_BRT_MIN,
+ LM3646_TOTAL_TORCH_BRT_MAX,
+ LM3646_TOTAL_TORCH_BRT_STEP,
+ LM3646_TOTAL_TORCH_BRT_MAX);
+
+ /* fault */
+ fault = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FLASH_FAULT, 0,
+ V4L2_FLASH_FAULT_OVER_VOLTAGE
+ | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+ | V4L2_FLASH_FAULT_SHORT_CIRCUIT
+ | V4L2_FLASH_FAULT_TIMEOUT, 0, 0);
+ if (fault != NULL)
+ fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
+
+ if (hdl->error)
+ return hdl->error;
+
+ flash->subdev_led.ctrl_handler = hdl;
+ return 0;
+}
+
+/* initialize device */
+static const struct v4l2_subdev_ops lm3646_ops = {
+ .core = NULL,
+};
+
+static const struct regmap_config lm3646_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xFF,
+};
+
+static int lm3646_subdev_init(struct lm3646_flash *flash)
+{
+ struct i2c_client *client = to_i2c_client(flash->dev);
+ int rval;
+
+ v4l2_i2c_subdev_init(&flash->subdev_led, client, &lm3646_ops);
+ flash->subdev_led.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ strcpy(flash->subdev_led.name, LM3646_NAME);
+ rval = lm3646_init_controls(flash);
+ if (rval)
+ goto err_out;
+ rval = media_entity_init(&flash->subdev_led.entity, 0, NULL, 0);
+ if (rval < 0)
+ goto err_out;
+ flash->subdev_led.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
+ return rval;
+
+err_out:
+ v4l2_ctrl_handler_free(&flash->ctrls_led);
+ return rval;
+}
+
+static int lm3646_init_device(struct lm3646_flash *flash)
+{
+ unsigned int reg_val;
+ int rval;
+
+ /* read the value of mode register to reduce redundant i2c accesses */
+ rval = regmap_read(flash->regmap, REG_ENABLE, &reg_val);
+ if (rval < 0)
+ return rval;
+ flash->mode_reg = reg_val & 0xfc;
+
+ /* output disable */
+ rval = lm3646_mode_ctrl(flash, V4L2_FLASH_LED_MODE_NONE);
+ if (rval < 0)
+ return rval;
+
+ /*
+ * LED1 flash current setting
+ * LED2 flash current = Total(Max) flash current - LED1 flash current
+ */
+ rval = regmap_update_bits(flash->regmap,
+ REG_LED1_FLASH_BR, 0x7F,
+ LM3646_LED1_FLASH_BRT_uA_TO_REG
+ (flash->pdata->led1_flash_brt));
+
+ if (rval < 0)
+ return rval;
+
+ /*
+ * LED1 torch current setting
+ * LED2 torch current = Total(Max) torch current - LED1 torch current
+ */
+ rval = regmap_update_bits(flash->regmap,
+ REG_LED1_TORCH_BR, 0x7F,
+ LM3646_LED1_TORCH_BRT_uA_TO_REG
+ (flash->pdata->led1_torch_brt));
+ if (rval < 0)
+ return rval;
+
+ /* Reset flag register */
+ return regmap_read(flash->regmap, REG_FLAG, &reg_val);
+}
+
+static int lm3646_probe(struct i2c_client *client,
+ const struct i2c_device_id *devid)
+{
+ struct lm3646_flash *flash;
+ struct lm3646_platform_data *pdata = dev_get_platdata(&client->dev);
+ int rval;
+
+ flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
+ if (flash == NULL)
+ return -ENOMEM;
+
+ flash->regmap = devm_regmap_init_i2c(client, &lm3646_regmap);
+ if (IS_ERR(flash->regmap))
+ return PTR_ERR(flash->regmap);
+
+ /* check device tree if there is no platform data */
+ if (pdata == NULL) {
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct lm3646_platform_data),
+ GFP_KERNEL);
+ if (pdata == NULL)
+ return -ENOMEM;
+ /* use default data in case of no platform data */
+ pdata->flash_timeout = LM3646_FLASH_TOUT_MAX;
+ pdata->led1_torch_brt = LM3646_LED1_TORCH_BRT_MAX;
+ pdata->led1_flash_brt = LM3646_LED1_FLASH_BRT_MAX;
+ }
+ flash->pdata = pdata;
+ flash->dev = &client->dev;
+
+ rval = lm3646_subdev_init(flash);
+ if (rval < 0)
+ return rval;
+
+ rval = lm3646_init_device(flash);
+ if (rval < 0)
+ return rval;
+
+ i2c_set_clientdata(client, flash);
+
+ return 0;
+}
+
+static int lm3646_remove(struct i2c_client *client)
+{
+ struct lm3646_flash *flash = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(&flash->subdev_led);
+ v4l2_ctrl_handler_free(&flash->ctrls_led);
+ media_entity_cleanup(&flash->subdev_led.entity);
+
+ return 0;
+}
+
+static const struct i2c_device_id lm3646_id_table[] = {
+ {LM3646_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lm3646_id_table);
+
+static struct i2c_driver lm3646_i2c_driver = {
+ .driver = {
+ .name = LM3646_NAME,
+ },
+ .probe = lm3646_probe,
+ .remove = lm3646_remove,
+ .id_table = lm3646_id_table,
+};
+
+module_i2c_driver(lm3646_i2c_driver);
+
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
+MODULE_DESCRIPTION("Texas Instruments LM3646 Dual Flash LED driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 192c4aa..33daace 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -78,6 +78,9 @@
#define MT9P031_PLL_CONFIG_1 0x11
#define MT9P031_PLL_CONFIG_2 0x12
#define MT9P031_PIXEL_CLOCK_CONTROL 0x0a
+#define MT9P031_PIXEL_CLOCK_INVERT (1 << 15)
+#define MT9P031_PIXEL_CLOCK_SHIFT(n) ((n) << 8)
+#define MT9P031_PIXEL_CLOCK_DIVIDE(n) ((n) << 0)
#define MT9P031_FRAME_RESTART 0x0b
#define MT9P031_SHUTTER_DELAY 0x0c
#define MT9P031_RST 0x0d
@@ -130,6 +133,8 @@ struct mt9p031 {
enum mt9p031_model model;
struct aptina_pll pll;
+ unsigned int clk_div;
+ bool use_pll;
int reset;
struct v4l2_ctrl_handler ctrls;
@@ -198,6 +203,11 @@ static int mt9p031_reset(struct mt9p031 *mt9p031)
if (ret < 0)
return ret;
+ ret = mt9p031_write(client, MT9P031_PIXEL_CLOCK_CONTROL,
+ MT9P031_PIXEL_CLOCK_DIVIDE(mt9p031->clk_div));
+ if (ret < 0)
+ return ret;
+
return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN,
0);
}
@@ -222,15 +232,34 @@ static int mt9p031_clk_setup(struct mt9p031 *mt9p031)
struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
struct mt9p031_platform_data *pdata = mt9p031->pdata;
+ int ret;
mt9p031->clk = devm_clk_get(&client->dev, NULL);
if (IS_ERR(mt9p031->clk))
return PTR_ERR(mt9p031->clk);
- clk_set_rate(mt9p031->clk, pdata->ext_freq);
+ ret = clk_set_rate(mt9p031->clk, pdata->ext_freq);
+ if (ret < 0)
+ return ret;
+
+ /* If the external clock frequency is out of bounds for the PLL use the
+ * pixel clock divider only and disable the PLL.
+ */
+ if (pdata->ext_freq > limits.ext_clock_max) {
+ unsigned int div;
+
+ div = DIV_ROUND_UP(pdata->ext_freq, pdata->target_freq);
+ div = roundup_pow_of_two(div) / 2;
+
+ mt9p031->clk_div = max_t(unsigned int, div, 64);
+ mt9p031->use_pll = false;
+
+ return 0;
+ }
mt9p031->pll.ext_clock = pdata->ext_freq;
mt9p031->pll.pix_clock = pdata->target_freq;
+ mt9p031->use_pll = true;
return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll);
}
@@ -240,6 +269,9 @@ static int mt9p031_pll_enable(struct mt9p031 *mt9p031)
struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
int ret;
+ if (!mt9p031->use_pll)
+ return 0;
+
ret = mt9p031_write(client, MT9P031_PLL_CONTROL,
MT9P031_PLL_CONTROL_PWRON);
if (ret < 0)
@@ -265,6 +297,9 @@ static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
+ if (!mt9p031->use_pll)
+ return 0;
+
return mt9p031_write(client, MT9P031_PLL_CONTROL,
MT9P031_PLL_CONTROL_PWROFF);
}
@@ -285,9 +320,15 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
if (ret < 0)
return ret;
- /* Emable clock */
- if (mt9p031->clk)
- clk_prepare_enable(mt9p031->clk);
+ /* Enable clock */
+ if (mt9p031->clk) {
+ ret = clk_prepare_enable(mt9p031->clk);
+ if (ret) {
+ regulator_bulk_disable(ARRAY_SIZE(mt9p031->regulators),
+ mt9p031->regulators);
+ return ret;
+ }
+ }
/* Now RESET_BAR must be high */
if (gpio_is_valid(mt9p031->reset)) {
diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c
index d41c70e..422e068 100644
--- a/drivers/media/i2c/mt9t001.c
+++ b/drivers/media/i2c/mt9t001.c
@@ -12,9 +12,11 @@
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
#include <linux/i2c.h>
-#include <linux/module.h>
#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/v4l2-mediabus.h>
@@ -55,6 +57,7 @@
#define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0)
#define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1)
#define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6)
+#define MT9T001_OUTPUT_CONTROL_DEF 0x0002
#define MT9T001_SHUTTER_WIDTH_HIGH 0x08
#define MT9T001_SHUTTER_WIDTH_LOW 0x09
#define MT9T001_SHUTTER_WIDTH_MIN 1
@@ -116,6 +119,12 @@ struct mt9t001 {
struct v4l2_subdev subdev;
struct media_pad pad;
+ struct clk *clk;
+ struct regulator_bulk_data regulators[2];
+
+ struct mutex power_lock; /* lock to protect power_count */
+ int power_count;
+
struct v4l2_mbus_framefmt format;
struct v4l2_rect crop;
@@ -159,6 +168,77 @@ static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear,
return 0;
}
+static int mt9t001_reset(struct mt9t001 *mt9t001)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
+ int ret;
+
+ /* Reset the chip and stop data read out */
+ ret = mt9t001_write(client, MT9T001_RESET, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_write(client, MT9T001_RESET, 0);
+ if (ret < 0)
+ return ret;
+
+ mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF;
+
+ return mt9t001_set_output_control(mt9t001,
+ MT9T001_OUTPUT_CONTROL_CHIP_ENABLE,
+ 0);
+}
+
+static int mt9t001_power_on(struct mt9t001 *mt9t001)
+{
+ int ret;
+
+ /* Bring up the supplies */
+ ret = regulator_bulk_enable(ARRAY_SIZE(mt9t001->regulators),
+ mt9t001->regulators);
+ if (ret < 0)
+ return ret;
+
+ /* Enable clock */
+ ret = clk_prepare_enable(mt9t001->clk);
+ if (ret < 0)
+ regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators),
+ mt9t001->regulators);
+
+ return ret;
+}
+
+static void mt9t001_power_off(struct mt9t001 *mt9t001)
+{
+ regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators),
+ mt9t001->regulators);
+
+ clk_disable_unprepare(mt9t001->clk);
+}
+
+static int __mt9t001_set_power(struct mt9t001 *mt9t001, bool on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
+ int ret;
+
+ if (!on) {
+ mt9t001_power_off(mt9t001);
+ return 0;
+ }
+
+ ret = mt9t001_power_on(mt9t001);
+ if (ret < 0)
+ return ret;
+
+ ret = mt9t001_reset(mt9t001);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to reset the camera\n");
+ return ret;
+ }
+
+ return v4l2_ctrl_handler_setup(&mt9t001->ctrls);
+}
+
/* -----------------------------------------------------------------------------
* V4L2 subdev video operations
*/
@@ -195,6 +275,7 @@ static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable)
{
const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE;
struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ struct mt9t001_platform_data *pdata = client->dev.platform_data;
struct mt9t001 *mt9t001 = to_mt9t001(subdev);
struct v4l2_mbus_framefmt *format = &mt9t001->format;
struct v4l2_rect *crop = &mt9t001->crop;
@@ -205,6 +286,14 @@ static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable)
if (!enable)
return mt9t001_set_output_control(mt9t001, mode, 0);
+ /* Configure the pixel clock polarity */
+ if (pdata->clk_pol) {
+ ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK,
+ MT9T001_PIXEL_CLOCK_INVERT);
+ if (ret < 0)
+ return ret;
+ }
+
/* Configure the window size and row/column bin */
hratio = DIV_ROUND_CLOSEST(crop->width, format->width);
vratio = DIV_ROUND_CLOSEST(crop->height, format->height);
@@ -630,9 +719,67 @@ static const struct v4l2_ctrl_config mt9t001_gains[] = {
};
/* -----------------------------------------------------------------------------
+ * V4L2 subdev core operations
+ */
+
+static int mt9t001_set_power(struct v4l2_subdev *subdev, int on)
+{
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+ int ret = 0;
+
+ mutex_lock(&mt9t001->power_lock);
+
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (mt9t001->power_count == !on) {
+ ret = __mt9t001_set_power(mt9t001, !!on);
+ if (ret < 0)
+ goto out;
+ }
+
+ /* Update the power count. */
+ mt9t001->power_count += on ? 1 : -1;
+ WARN_ON(mt9t001->power_count < 0);
+
+out:
+ mutex_unlock(&mt9t001->power_lock);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
* V4L2 subdev internal operations
*/
+static int mt9t001_registered(struct v4l2_subdev *subdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(subdev);
+ struct mt9t001 *mt9t001 = to_mt9t001(subdev);
+ s32 data;
+ int ret;
+
+ ret = mt9t001_power_on(mt9t001);
+ if (ret < 0) {
+ dev_err(&client->dev, "MT9T001 power up failed\n");
+ return ret;
+ }
+
+ /* Read out the chip version register */
+ data = mt9t001_read(client, MT9T001_CHIP_VERSION);
+ mt9t001_power_off(mt9t001);
+
+ if (data != MT9T001_CHIP_ID) {
+ dev_err(&client->dev,
+ "MT9T001 not detected, wrong version 0x%04x\n", data);
+ return -ENODEV;
+ }
+
+ dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n",
+ client->addr);
+
+ return 0;
+}
+
static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
{
struct v4l2_mbus_framefmt *format;
@@ -651,9 +798,18 @@ static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
format->field = V4L2_FIELD_NONE;
format->colorspace = V4L2_COLORSPACE_SRGB;
- return 0;
+ return mt9t001_set_power(subdev, 1);
+}
+
+static int mt9t001_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+ return mt9t001_set_power(subdev, 0);
}
+static struct v4l2_subdev_core_ops mt9t001_subdev_core_ops = {
+ .s_power = mt9t001_set_power,
+};
+
static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = {
.s_stream = mt9t001_s_stream,
};
@@ -668,58 +824,17 @@ static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = {
};
static struct v4l2_subdev_ops mt9t001_subdev_ops = {
+ .core = &mt9t001_subdev_core_ops,
.video = &mt9t001_subdev_video_ops,
.pad = &mt9t001_subdev_pad_ops,
};
static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = {
+ .registered = mt9t001_registered,
.open = mt9t001_open,
+ .close = mt9t001_close,
};
-static int mt9t001_video_probe(struct i2c_client *client)
-{
- struct mt9t001_platform_data *pdata = client->dev.platform_data;
- s32 data;
- int ret;
-
- dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n",
- client->addr);
-
- /* Reset the chip and stop data read out */
- ret = mt9t001_write(client, MT9T001_RESET, 1);
- if (ret < 0)
- return ret;
-
- ret = mt9t001_write(client, MT9T001_RESET, 0);
- if (ret < 0)
- return ret;
-
- ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0);
- if (ret < 0)
- return ret;
-
- /* Configure the pixel clock polarity */
- if (pdata->clk_pol) {
- ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK,
- MT9T001_PIXEL_CLOCK_INVERT);
- if (ret < 0)
- return ret;
- }
-
- /* Read and check the sensor version */
- data = mt9t001_read(client, MT9T001_CHIP_VERSION);
- if (data != MT9T001_CHIP_ID) {
- dev_err(&client->dev, "MT9T001 not detected, wrong version "
- "0x%04x\n", data);
- return -ENODEV;
- }
-
- dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n",
- client->addr);
-
- return ret;
-}
-
static int mt9t001_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
@@ -740,14 +855,28 @@ static int mt9t001_probe(struct i2c_client *client,
return -EIO;
}
- ret = mt9t001_video_probe(client);
- if (ret < 0)
- return ret;
-
mt9t001 = devm_kzalloc(&client->dev, sizeof(*mt9t001), GFP_KERNEL);
if (!mt9t001)
return -ENOMEM;
+ mutex_init(&mt9t001->power_lock);
+ mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF;
+
+ mt9t001->regulators[0].supply = "vdd";
+ mt9t001->regulators[1].supply = "vaa";
+
+ ret = devm_regulator_bulk_get(&client->dev, 2, mt9t001->regulators);
+ if (ret < 0) {
+ dev_err(&client->dev, "Unable to get regulators\n");
+ return ret;
+ }
+
+ mt9t001->clk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(mt9t001->clk)) {
+ dev_err(&client->dev, "Unable to get clock\n");
+ return PTR_ERR(mt9t001->clk);
+ }
+
v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) +
ARRAY_SIZE(mt9t001_gains) + 4);
diff --git a/drivers/media/i2c/mt9v011.c b/drivers/media/i2c/mt9v011.c
index f74698c..47e4753 100644
--- a/drivers/media/i2c/mt9v011.c
+++ b/drivers/media/i2c/mt9v011.c
@@ -1,7 +1,7 @@
/*
* mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
*
- * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * Copyright (c) 2009 Mauro Carvalho Chehab
* This code is placed under the terms of the GNU General Public License v2
*/
@@ -16,7 +16,7 @@
#include <media/mt9v011.h>
MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
static int debug;
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index 36c504b..40172b8 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -317,8 +317,14 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032)
struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
int ret;
- clk_set_rate(mt9v032->clk, mt9v032->sysclk);
- clk_prepare_enable(mt9v032->clk);
+ ret = clk_set_rate(mt9v032->clk, mt9v032->sysclk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare_enable(mt9v032->clk);
+ if (ret)
+ return ret;
+
udelay(1);
/* Reset the chip and stop data read out */
diff --git a/drivers/media/i2c/sr030pc30.c b/drivers/media/i2c/sr030pc30.c
index ae94326..118f8ee 100644
--- a/drivers/media/i2c/sr030pc30.c
+++ b/drivers/media/i2c/sr030pc30.c
@@ -8,7 +8,7 @@
* and HeungJun Kim <riverful.kim@samsung.com>.
*
* Based on mt9v011 Micron Digital Image Sensor driver
- * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
+ * Copyright (c) 2009 Mauro Carvalho Chehab
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/i2c/ths8200.c b/drivers/media/i2c/ths8200.c
index 04139ee..f72561e 100644
--- a/drivers/media/i2c/ths8200.c
+++ b/drivers/media/i2c/ths8200.c
@@ -217,8 +217,8 @@ static void ths8200_core_init(struct v4l2_subdev *sd)
/* Disable embedded syncs on the output by setting
* the amplitude to zero for all channels.
*/
- ths8200_write(sd, THS8200_DTG1_Y_SYNC_MSB, 0x2a);
- ths8200_write(sd, THS8200_DTG1_CBCR_SYNC_MSB, 0x2a);
+ ths8200_write(sd, THS8200_DTG1_Y_SYNC_MSB, 0x00);
+ ths8200_write(sd, THS8200_DTG1_CBCR_SYNC_MSB, 0x00);
}
static void ths8200_setup(struct v4l2_subdev *sd, struct v4l2_bt_timings *bt)
@@ -318,15 +318,15 @@ static void ths8200_setup(struct v4l2_subdev *sd, struct v4l2_bt_timings *bt)
(htotal(bt) >> 8) & 0x1f);
ths8200_write(sd, THS8200_DTG2_HLENGTH_HDLY_LSB, htotal(bt));
- /* v sync width transmitted */
- ths8200_write(sd, THS8200_DTG2_VLENGTH1_LSB, (bt->vsync) & 0xff);
+ /* v sync width transmitted (must add 1 to get correct output) */
+ ths8200_write(sd, THS8200_DTG2_VLENGTH1_LSB, (bt->vsync + 1) & 0xff);
ths8200_write_and_or(sd, THS8200_DTG2_VLENGTH1_MSB_VDLY1_MSB, 0x3f,
- ((bt->vsync) >> 2) & 0xc0);
+ ((bt->vsync + 1) >> 2) & 0xc0);
- /* The pixel value v sync is asserted on */
+ /* The pixel value v sync is asserted on (must add 1 to get correct output) */
ths8200_write_and_or(sd, THS8200_DTG2_VLENGTH1_MSB_VDLY1_MSB, 0xf8,
- (vtotal(bt)>>8) & 0x7);
- ths8200_write(sd, THS8200_DTG2_VDLY1_LSB, vtotal(bt));
+ ((vtotal(bt) + 1) >> 8) & 0x7);
+ ths8200_write(sd, THS8200_DTG2_VDLY1_LSB, vtotal(bt) + 1);
/* For progressive video vlength2 must be set to all 0 and vdly2 must
* be set to all 1.
@@ -336,11 +336,11 @@ static void ths8200_setup(struct v4l2_subdev *sd, struct v4l2_bt_timings *bt)
ths8200_write(sd, THS8200_DTG2_VDLY2_LSB, 0xff);
/* Internal delay factors to synchronize the sync pulses and the data */
- /* Experimental values delays (hor 4, ver 1) */
- ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_MSB, (htotal(bt)>>8) & 0x1f);
- ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_LSB, (htotal(bt) - 4) & 0xff);
+ /* Experimental values delays (hor 0, ver 0) */
+ ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_MSB, 0);
+ ths8200_write(sd, THS8200_DTG2_HS_IN_DLY_LSB, 0);
ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_MSB, 0);
- ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_LSB, 1);
+ ths8200_write(sd, THS8200_DTG2_VS_IN_DLY_LSB, 0);
/* Polarity of received and transmitted sync signals */
if (bt->polarities & V4L2_DV_HSYNC_POS_POL) {
@@ -356,7 +356,7 @@ static void ths8200_setup(struct v4l2_subdev *sd, struct v4l2_bt_timings *bt)
/* Timing of video input bus is derived from HS, VS, and FID dedicated
* inputs
*/
- ths8200_write(sd, THS8200_DTG2_CNTL, 0x47 | polarity);
+ ths8200_write(sd, THS8200_DTG2_CNTL, 0x44 | polarity);
/* leave reset */
ths8200_s_stream(sd, true);
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 542d252..4fd3688 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -16,9 +16,9 @@
#include "tvp5150_reg.h"
-#define TVP5150_H_MAX 720
-#define TVP5150_V_MAX_525_60 480
-#define TVP5150_V_MAX_OTHERS 576
+#define TVP5150_H_MAX 720U
+#define TVP5150_V_MAX_525_60 480U
+#define TVP5150_V_MAX_OTHERS 576U
#define TVP5150_MAX_CROP_LEFT 511
#define TVP5150_MAX_CROP_TOP 127
#define TVP5150_CROP_SHIFT 2
@@ -29,7 +29,7 @@ MODULE_LICENSE("GPL");
static int debug;
-module_param(debug, int, 0);
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
struct tvp5150 {
OpenPOWER on IntegriCloud