diff options
Diffstat (limited to 'drivers/media/i2c/mt9t001.c')
-rw-r--r-- | drivers/media/i2c/mt9t001.c | 229 |
1 files changed, 179 insertions, 50 deletions
diff --git a/drivers/media/i2c/mt9t001.c b/drivers/media/i2c/mt9t001.c index d41c70e..422e068 100644 --- a/drivers/media/i2c/mt9t001.c +++ b/drivers/media/i2c/mt9t001.c @@ -12,9 +12,11 @@ * published by the Free Software Foundation. */ +#include <linux/clk.h> #include <linux/i2c.h> -#include <linux/module.h> #include <linux/log2.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/videodev2.h> #include <linux/v4l2-mediabus.h> @@ -55,6 +57,7 @@ #define MT9T001_OUTPUT_CONTROL_SYNC (1 << 0) #define MT9T001_OUTPUT_CONTROL_CHIP_ENABLE (1 << 1) #define MT9T001_OUTPUT_CONTROL_TEST_DATA (1 << 6) +#define MT9T001_OUTPUT_CONTROL_DEF 0x0002 #define MT9T001_SHUTTER_WIDTH_HIGH 0x08 #define MT9T001_SHUTTER_WIDTH_LOW 0x09 #define MT9T001_SHUTTER_WIDTH_MIN 1 @@ -116,6 +119,12 @@ struct mt9t001 { struct v4l2_subdev subdev; struct media_pad pad; + struct clk *clk; + struct regulator_bulk_data regulators[2]; + + struct mutex power_lock; /* lock to protect power_count */ + int power_count; + struct v4l2_mbus_framefmt format; struct v4l2_rect crop; @@ -159,6 +168,77 @@ static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear, return 0; } +static int mt9t001_reset(struct mt9t001 *mt9t001) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + int ret; + + /* Reset the chip and stop data read out */ + ret = mt9t001_write(client, MT9T001_RESET, 1); + if (ret < 0) + return ret; + + ret = mt9t001_write(client, MT9T001_RESET, 0); + if (ret < 0) + return ret; + + mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF; + + return mt9t001_set_output_control(mt9t001, + MT9T001_OUTPUT_CONTROL_CHIP_ENABLE, + 0); +} + +static int mt9t001_power_on(struct mt9t001 *mt9t001) +{ + int ret; + + /* Bring up the supplies */ + ret = regulator_bulk_enable(ARRAY_SIZE(mt9t001->regulators), + mt9t001->regulators); + if (ret < 0) + return ret; + + /* Enable clock */ + ret = clk_prepare_enable(mt9t001->clk); + if (ret < 0) + regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators), + mt9t001->regulators); + + return ret; +} + +static void mt9t001_power_off(struct mt9t001 *mt9t001) +{ + regulator_bulk_disable(ARRAY_SIZE(mt9t001->regulators), + mt9t001->regulators); + + clk_disable_unprepare(mt9t001->clk); +} + +static int __mt9t001_set_power(struct mt9t001 *mt9t001, bool on) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev); + int ret; + + if (!on) { + mt9t001_power_off(mt9t001); + return 0; + } + + ret = mt9t001_power_on(mt9t001); + if (ret < 0) + return ret; + + ret = mt9t001_reset(mt9t001); + if (ret < 0) { + dev_err(&client->dev, "Failed to reset the camera\n"); + return ret; + } + + return v4l2_ctrl_handler_setup(&mt9t001->ctrls); +} + /* ----------------------------------------------------------------------------- * V4L2 subdev video operations */ @@ -195,6 +275,7 @@ static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable) { const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE; struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9t001_platform_data *pdata = client->dev.platform_data; struct mt9t001 *mt9t001 = to_mt9t001(subdev); struct v4l2_mbus_framefmt *format = &mt9t001->format; struct v4l2_rect *crop = &mt9t001->crop; @@ -205,6 +286,14 @@ static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable) if (!enable) return mt9t001_set_output_control(mt9t001, mode, 0); + /* Configure the pixel clock polarity */ + if (pdata->clk_pol) { + ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK, + MT9T001_PIXEL_CLOCK_INVERT); + if (ret < 0) + return ret; + } + /* Configure the window size and row/column bin */ hratio = DIV_ROUND_CLOSEST(crop->width, format->width); vratio = DIV_ROUND_CLOSEST(crop->height, format->height); @@ -630,9 +719,67 @@ static const struct v4l2_ctrl_config mt9t001_gains[] = { }; /* ----------------------------------------------------------------------------- + * V4L2 subdev core operations + */ + +static int mt9t001_set_power(struct v4l2_subdev *subdev, int on) +{ + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + int ret = 0; + + mutex_lock(&mt9t001->power_lock); + + /* If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9t001->power_count == !on) { + ret = __mt9t001_set_power(mt9t001, !!on); + if (ret < 0) + goto out; + } + + /* Update the power count. */ + mt9t001->power_count += on ? 1 : -1; + WARN_ON(mt9t001->power_count < 0); + +out: + mutex_unlock(&mt9t001->power_lock); + return ret; +} + +/* ----------------------------------------------------------------------------- * V4L2 subdev internal operations */ +static int mt9t001_registered(struct v4l2_subdev *subdev) +{ + struct i2c_client *client = v4l2_get_subdevdata(subdev); + struct mt9t001 *mt9t001 = to_mt9t001(subdev); + s32 data; + int ret; + + ret = mt9t001_power_on(mt9t001); + if (ret < 0) { + dev_err(&client->dev, "MT9T001 power up failed\n"); + return ret; + } + + /* Read out the chip version register */ + data = mt9t001_read(client, MT9T001_CHIP_VERSION); + mt9t001_power_off(mt9t001); + + if (data != MT9T001_CHIP_ID) { + dev_err(&client->dev, + "MT9T001 not detected, wrong version 0x%04x\n", data); + return -ENODEV; + } + + dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n", + client->addr); + + return 0; +} + static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) { struct v4l2_mbus_framefmt *format; @@ -651,9 +798,18 @@ static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) format->field = V4L2_FIELD_NONE; format->colorspace = V4L2_COLORSPACE_SRGB; - return 0; + return mt9t001_set_power(subdev, 1); +} + +static int mt9t001_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + return mt9t001_set_power(subdev, 0); } +static struct v4l2_subdev_core_ops mt9t001_subdev_core_ops = { + .s_power = mt9t001_set_power, +}; + static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = { .s_stream = mt9t001_s_stream, }; @@ -668,58 +824,17 @@ static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = { }; static struct v4l2_subdev_ops mt9t001_subdev_ops = { + .core = &mt9t001_subdev_core_ops, .video = &mt9t001_subdev_video_ops, .pad = &mt9t001_subdev_pad_ops, }; static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = { + .registered = mt9t001_registered, .open = mt9t001_open, + .close = mt9t001_close, }; -static int mt9t001_video_probe(struct i2c_client *client) -{ - struct mt9t001_platform_data *pdata = client->dev.platform_data; - s32 data; - int ret; - - dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n", - client->addr); - - /* Reset the chip and stop data read out */ - ret = mt9t001_write(client, MT9T001_RESET, 1); - if (ret < 0) - return ret; - - ret = mt9t001_write(client, MT9T001_RESET, 0); - if (ret < 0) - return ret; - - ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0); - if (ret < 0) - return ret; - - /* Configure the pixel clock polarity */ - if (pdata->clk_pol) { - ret = mt9t001_write(client, MT9T001_PIXEL_CLOCK, - MT9T001_PIXEL_CLOCK_INVERT); - if (ret < 0) - return ret; - } - - /* Read and check the sensor version */ - data = mt9t001_read(client, MT9T001_CHIP_VERSION); - if (data != MT9T001_CHIP_ID) { - dev_err(&client->dev, "MT9T001 not detected, wrong version " - "0x%04x\n", data); - return -ENODEV; - } - - dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n", - client->addr); - - return ret; -} - static int mt9t001_probe(struct i2c_client *client, const struct i2c_device_id *did) { @@ -740,14 +855,28 @@ static int mt9t001_probe(struct i2c_client *client, return -EIO; } - ret = mt9t001_video_probe(client); - if (ret < 0) - return ret; - mt9t001 = devm_kzalloc(&client->dev, sizeof(*mt9t001), GFP_KERNEL); if (!mt9t001) return -ENOMEM; + mutex_init(&mt9t001->power_lock); + mt9t001->output_control = MT9T001_OUTPUT_CONTROL_DEF; + + mt9t001->regulators[0].supply = "vdd"; + mt9t001->regulators[1].supply = "vaa"; + + ret = devm_regulator_bulk_get(&client->dev, 2, mt9t001->regulators); + if (ret < 0) { + dev_err(&client->dev, "Unable to get regulators\n"); + return ret; + } + + mt9t001->clk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(mt9t001->clk)) { + dev_err(&client->dev, "Unable to get clock\n"); + return PTR_ERR(mt9t001->clk); + } + v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) + ARRAY_SIZE(mt9t001_gains) + 4); |