summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/pluto2/pluto2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/dvb/pluto2/pluto2.c')
-rw-r--r--drivers/media/dvb/pluto2/pluto2.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 6ca6713d..7cb79ec 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -294,13 +294,13 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
/* Workaround for broken hardware:
* [1] On startup NBPACKETS seems to contain an uninitialized value,
- * but no packets have been transfered.
+ * but no packets have been transferred.
* [2] Sometimes (actually very often) NBPACKETS stays at zero
- * although one packet has been transfered.
+ * although one packet has been transferred.
* [3] Sometimes (actually rarely), the card gets into an erroneous
* mode where it continuously generates interrupts, claiming it
- * has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
- * has been transfered. Only a reset seems to solve this
+ * has received nbpackets>TS_DMA_PACKETS packets, but no packet
+ * has been transferred. Only a reset seems to solve this
*/
if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
unsigned int i = 0;
@@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id)
struct pluto *pluto = dev_id;
u32 tscr;
- /* check whether an interrupt occured on this device */
+ /* check whether an interrupt occurred on this device */
tscr = pluto_readreg(pluto, REG_TSCR);
if (!(tscr & (TSCR_DE | TSCR_OVR)))
return IRQ_NONE;
OpenPOWER on IntegriCloud