1 files changed, 0 insertions, 845 deletions

diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
deleted file mode 100644
index 7e9e00f..0000000
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/* Linux driver for devices based on the DiBcom DiB0700 USB bridge
- *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
- *
- *  Copyright (C) 2005-6 DiBcom, SA
- */
-#include "dib0700.h"
-
-/* debug */
-int dvb_usb_dib0700_debug;
-module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
-
-static int nb_packet_buffer_size = 21;
-module_param(nb_packet_buffer_size, int, 0644);
-MODULE_PARM_DESC(nb_packet_buffer_size,
-	"Set the dib0700 driver data buffer size. This parameter "
-	"corresponds to the number of TS packets. The actual size of "
-	"the data buffer corresponds to this parameter "
-	"multiplied by 188 (default: 21)");
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-
-int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
-			u32 *romversion, u32 *ramversion, u32 *fwtype)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
-				  REQUEST_GET_VERSION,
-				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-				  st->buf, 16, USB_CTRL_GET_TIMEOUT);
-	if (hwversion != NULL)
-		*hwversion  = (st->buf[0] << 24)  | (st->buf[1] << 16)  |
-			(st->buf[2] << 8)  | st->buf[3];
-	if (romversion != NULL)
-		*romversion = (st->buf[4] << 24)  | (st->buf[5] << 16)  |
-			(st->buf[6] << 8)  | st->buf[7];
-	if (ramversion != NULL)
-		*ramversion = (st->buf[8] << 24)  | (st->buf[9] << 16)  |
-			(st->buf[10] << 8) | st->buf[11];
-	if (fwtype != NULL)
-		*fwtype     = (st->buf[12] << 24) | (st->buf[13] << 16) |
-			(st->buf[14] << 8) | st->buf[15];
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-/* expecting rx buffer: request data[0] data[1] ... data[2] */
-static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
-{
-	int status;
-
-	deb_data(">>> ");
-	debug_dump(tx, txlen, deb_data);
-
-	status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
-		tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
-		USB_CTRL_GET_TIMEOUT);
-
-	if (status != txlen)
-		deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
-
-	return status < 0 ? status : 0;
-}
-
-/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */
-int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
-{
-	u16 index, value;
-	int status;
-
-	if (txlen < 2) {
-		err("tx buffer length is smaller than 2. Makes no sense.");
-		return -EINVAL;
-	}
-	if (txlen > 4) {
-		err("tx buffer length is larger than 4. Not supported.");
-		return -EINVAL;
-	}
-
-	deb_data(">>> ");
-	debug_dump(tx,txlen,deb_data);
-
-	value = ((txlen - 2) << 8) | tx[1];
-	index = 0;
-	if (txlen > 2)
-		index |= (tx[2] << 8);
-	if (txlen > 3)
-		index |= tx[3];
-
-	status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0],
-			USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen,
-			USB_CTRL_GET_TIMEOUT);
-
-	if (status < 0)
-		deb_info("ep 0 read error (status = %d)\n",status);
-
-	deb_data("<<< ");
-	debug_dump(rx, rxlen, deb_data);
-
-	return status; /* length in case of success */
-}
-
-int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_GPIO;
-	st->buf[1] = gpio;
-	st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6);
-
-	ret = dib0700_ctrl_wr(d, st->buf, 3);
-
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (st->fw_version >= 0x10201) {
-		if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-			err("could not acquire lock");
-			return -EINTR;
-		}
-
-		st->buf[0] = REQUEST_SET_USB_XFER_LEN;
-		st->buf[1] = (nb_ts_packets >> 8) & 0xff;
-		st->buf[2] = nb_ts_packets & 0xff;
-
-		deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
-
-		ret = dib0700_ctrl_wr(d, st->buf, 3);
-		mutex_unlock(&d->usb_mutex);
-	} else {
-		deb_info("this firmware does not allow to change the USB xfer len\n");
-		ret = -EIO;
-	}
-
-	return ret;
-}
-
-/*
- * I2C master xfer function (supported in 1.20 firmware)
- */
-static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
-				int num)
-{
-	/* The new i2c firmware messages are more reliable and in particular
-	   properly support i2c read calls not preceded by a write */
-
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-	uint8_t bus_mode = 1;  /* 0=eeprom bus, 1=frontend bus */
-	uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */
-	uint8_t en_start = 0;
-	uint8_t en_stop = 0;
-	int result, i;
-
-	/* Ensure nobody else hits the i2c bus while we're sending our
-	   sequence of messages, (such as the remote control thread) */
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EINTR;
-
-	for (i = 0; i < num; i++) {
-		if (i == 0) {
-			/* First message in the transaction */
-			en_start = 1;
-		} else if (!(msg[i].flags & I2C_M_NOSTART)) {
-			/* Device supports repeated-start */
-			en_start = 1;
-		} else {
-			/* Not the first packet and device doesn't support
-			   repeated start */
-			en_start = 0;
-		}
-		if (i == (num - 1)) {
-			/* Last message in the transaction */
-			en_stop = 1;
-		}
-
-		if (msg[i].flags & I2C_M_RD) {
-			/* Read request */
-			u16 index, value;
-			uint8_t i2c_dest;
-
-			i2c_dest = (msg[i].addr << 1);
-			value = ((en_start << 7) | (en_stop << 6) |
-				 (msg[i].len & 0x3F)) << 8 | i2c_dest;
-			/* I2C ctrl + FE bus; */
-			index = ((gen_mode << 6) & 0xC0) |
-				((bus_mode << 4) & 0x30);
-
-			result = usb_control_msg(d->udev,
-						 usb_rcvctrlpipe(d->udev, 0),
-						 REQUEST_NEW_I2C_READ,
-						 USB_TYPE_VENDOR | USB_DIR_IN,
-						 value, index, msg[i].buf,
-						 msg[i].len,
-						 USB_CTRL_GET_TIMEOUT);
-			if (result < 0) {
-				deb_info("i2c read error (status = %d)\n", result);
-				break;
-			}
-
-			deb_data("<<< ");
-			debug_dump(msg[i].buf, msg[i].len, deb_data);
-
-		} else {
-			/* Write request */
-			if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-				err("could not acquire lock");
-				mutex_unlock(&d->i2c_mutex);
-				return -EINTR;
-			}
-			st->buf[0] = REQUEST_NEW_I2C_WRITE;
-			st->buf[1] = msg[i].addr << 1;
-			st->buf[2] = (en_start << 7) | (en_stop << 6) |
-				(msg[i].len & 0x3F);
-			/* I2C ctrl + FE bus; */
-			st->buf[3] = ((gen_mode << 6) & 0xC0) |
-				 ((bus_mode << 4) & 0x30);
-			/* The Actual i2c payload */
-			memcpy(&st->buf[4], msg[i].buf, msg[i].len);
-
-			deb_data(">>> ");
-			debug_dump(st->buf, msg[i].len + 4, deb_data);
-
-			result = usb_control_msg(d->udev,
-						 usb_sndctrlpipe(d->udev, 0),
-						 REQUEST_NEW_I2C_WRITE,
-						 USB_TYPE_VENDOR | USB_DIR_OUT,
-						 0, 0, st->buf, msg[i].len + 4,
-						 USB_CTRL_GET_TIMEOUT);
-			mutex_unlock(&d->usb_mutex);
-			if (result < 0) {
-				deb_info("i2c write error (status = %d)\n", result);
-				break;
-			}
-		}
-	}
-	mutex_unlock(&d->i2c_mutex);
-	return i;
-}
-
-/*
- * I2C master xfer function (pre-1.20 firmware)
- */
-static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
-				   struct i2c_msg *msg, int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-	int i,len;
-
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
-		return -EINTR;
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		mutex_unlock(&d->i2c_mutex);
-		return -EINTR;
-	}
-
-	for (i = 0; i < num; i++) {
-		/* fill in the address */
-		st->buf[1] = msg[i].addr << 1;
-		/* fill the buffer */
-		memcpy(&st->buf[2], msg[i].buf, msg[i].len);
-
-		/* write/read request */
-		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
-			st->buf[0] = REQUEST_I2C_READ;
-			st->buf[1] |= 1;
-
-			/* special thing in the current firmware: when length is zero the read-failed */
-			len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
-					msg[i+1].buf, msg[i+1].len);
-			if (len <= 0) {
-				deb_info("I2C read failed on address 0x%02x\n",
-						msg[i].addr);
-				break;
-			}
-
-			msg[i+1].len = len;
-
-			i++;
-		} else {
-			st->buf[0] = REQUEST_I2C_WRITE;
-			if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0)
-				break;
-		}
-	}
-	mutex_unlock(&d->usb_mutex);
-	mutex_unlock(&d->i2c_mutex);
-
-	return i;
-}
-
-static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
-			    int num)
-{
-	struct dvb_usb_device *d = i2c_get_adapdata(adap);
-	struct dib0700_state *st = d->priv;
-
-	if (st->fw_use_new_i2c_api == 1) {
-		/* User running at least fw 1.20 */
-		return dib0700_i2c_xfer_new(adap, msg, num);
-	} else {
-		/* Use legacy calls */
-		return dib0700_i2c_xfer_legacy(adap, msg, num);
-	}
-}
-
-static u32 dib0700_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C;
-}
-
-struct i2c_algorithm dib0700_i2c_algo = {
-	.master_xfer   = dib0700_i2c_xfer,
-	.functionality = dib0700_i2c_func,
-};
-
-int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
-			struct dvb_usb_device_description **desc, int *cold)
-{
-	s16 ret;
-	u8 *b;
-
-	b = kmalloc(16, GFP_KERNEL);
-	if (!b)
-		return	-ENOMEM;
-
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-		REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
-
-	deb_info("FW GET_VERSION length: %d\n",ret);
-
-	*cold = ret <= 0;
-	deb_info("cold: %d\n", *cold);
-
-	kfree(b);
-	return 0;
-}
-
-static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
-	u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
-	u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
-{
-	struct dib0700_state *st = d->priv;
-	int ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_CLOCK;
-	st->buf[1] = (en_pll << 7) | (pll_src << 6) |
-		(pll_range << 5) | (clock_gpio3 << 4);
-	st->buf[2] = (pll_prediv >> 8)  & 0xff; /* MSB */
-	st->buf[3] =  pll_prediv        & 0xff; /* LSB */
-	st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */
-	st->buf[5] =  pll_loopdiv       & 0xff; /* LSB */
-	st->buf[6] = (free_div >> 8)    & 0xff; /* MSB */
-	st->buf[7] =  free_div          & 0xff; /* LSB */
-	st->buf[8] = (dsuScaler >> 8)   & 0xff; /* MSB */
-	st->buf[9] =  dsuScaler         & 0xff; /* LSB */
-
-	ret = dib0700_ctrl_wr(d, st->buf, 10);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz)
-{
-	struct dib0700_state *st = d->priv;
-	u16 divider;
-	int ret;
-
-	if (scl_kHz == 0)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_I2C_PARAM;
-	divider = (u16) (30000 / scl_kHz);
-	st->buf[1] = 0;
-	st->buf[2] = (u8) (divider >> 8);
-	st->buf[3] = (u8) (divider & 0xff);
-	divider = (u16) (72000 / scl_kHz);
-	st->buf[4] = (u8) (divider >> 8);
-	st->buf[5] = (u8) (divider & 0xff);
-	divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */
-	st->buf[6] = (u8) (divider >> 8);
-	st->buf[7] = (u8) (divider & 0xff);
-
-	deb_info("setting I2C speed: %04x %04x %04x (%d kHz).",
-		(st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) |
-		st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz);
-
-	ret = dib0700_ctrl_wr(d, st->buf, 8);
-	mutex_unlock(&d->usb_mutex);
-
-	return ret;
-}
-
-
-int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
-{
-	switch (clk_MHz) {
-		case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
-		default: return -EINVAL;
-	}
-	return 0;
-}
-
-static int dib0700_jumpram(struct usb_device *udev, u32 address)
-{
-	int ret = 0, actlen;
-	u8 *buf;
-
-	buf = kmalloc(8, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-	buf[0] = REQUEST_JUMPRAM;
-	buf[1] = 0;
-	buf[2] = 0;
-	buf[3] = 0;
-	buf[4] = (address >> 24) & 0xff;
-	buf[5] = (address >> 16) & 0xff;
-	buf[6] = (address >> 8)  & 0xff;
-	buf[7] =  address        & 0xff;
-
-	if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) {
-		deb_fw("jumpram to 0x%x failed\n",address);
-		goto out;
-	}
-	if (actlen != 8) {
-		deb_fw("jumpram to 0x%x failed\n",address);
-		ret = -EIO;
-		goto out;
-	}
-out:
-	kfree(buf);
-	return ret;
-}
-
-int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
-{
-	struct hexline hx;
-	int pos = 0, ret, act_len, i, adap_num;
-	u8 *buf;
-	u32 fw_version;
-
-	buf = kmalloc(260, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
-		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
-				hx.addr, hx.len, hx.chk);
-
-		buf[0] = hx.len;
-		buf[1] = (hx.addr >> 8) & 0xff;
-		buf[2] =  hx.addr       & 0xff;
-		buf[3] = hx.type;
-		memcpy(&buf[4],hx.data,hx.len);
-		buf[4+hx.len] = hx.chk;
-
-		ret = usb_bulk_msg(udev,
-			usb_sndbulkpipe(udev, 0x01),
-			buf,
-			hx.len + 5,
-			&act_len,
-			1000);
-
-		if (ret < 0) {
-			err("firmware download failed at %d with %d",pos,ret);
-			goto out;
-		}
-	}
-
-	if (ret == 0) {
-		/* start the firmware */
-		if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
-			info("firmware started successfully.");
-			msleep(500);
-		}
-	} else
-		ret = -EIO;
-
-	/* the number of ts packet has to be at least 1 */
-	if (nb_packet_buffer_size < 1)
-		nb_packet_buffer_size = 1;
-
-	/* get the fimware version */
-	usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				  REQUEST_GET_VERSION,
-				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
-				  buf, 16, USB_CTRL_GET_TIMEOUT);
-	fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11];
-
-	/* set the buffer size - DVB-USB is allocating URB buffers
-	 * only after the firwmare download was successful */
-	for (i = 0; i < dib0700_device_count; i++) {
-		for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
-				adap_num++) {
-			if (fw_version >= 0x10201) {
-				dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
-			} else {
-				/* for fw version older than 1.20.1,
-				 * the buffersize has to be n times 512 */
-				dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
-				if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512)
-					dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512;
-			}
-		}
-	}
-out:
-	kfree(buf);
-	return ret;
-}
-
-int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct dib0700_state *st = adap->dev->priv;
-	int ret;
-
-	if ((onoff != 0) && (st->fw_version >= 0x10201)) {
-		/* for firmware later than 1.20.1,
-		 * the USB xfer length can be set  */
-		ret = dib0700_set_usb_xfer_len(adap->dev,
-			st->nb_packet_buffer_size);
-		if (ret < 0) {
-			deb_info("can not set the USB xfer len\n");
-			return ret;
-		}
-	}
-
-	if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_ENABLE_VIDEO;
-	/* this bit gives a kind of command,
-	 * rather than enabling something or not */
-	st->buf[1] = (onoff << 4) | 0x00;
-
-	if (st->disable_streaming_master_mode == 1)
-		st->buf[2] = 0x00;
-	else
-		st->buf[2] = 0x01 << 4; /* Master mode */
-
-	st->buf[3] = 0x00;
-
-	deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id);
-
-	st->channel_state &= ~0x3;
-	if ((adap->fe_adap[0].stream.props.endpoint != 2)
-			&& (adap->fe_adap[0].stream.props.endpoint != 3)) {
-		deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint);
-		if (onoff)
-			st->channel_state |=	1 << (adap->id);
-		else
-			st->channel_state |=	1 << ~(adap->id);
-	} else {
-		if (onoff)
-			st->channel_state |=	1 << (adap->fe_adap[0].stream.props.endpoint-2);
-		else
-			st->channel_state |=	1 << (3-adap->fe_adap[0].stream.props.endpoint);
-	}
-
-	st->buf[2] |= st->channel_state;
-
-	deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]);
-
-	ret = dib0700_ctrl_wr(adap->dev, st->buf, 4);
-	mutex_unlock(&adap->dev->usb_mutex);
-
-	return ret;
-}
-
-int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
-{
-	struct dvb_usb_device *d = rc->priv;
-	struct dib0700_state *st = d->priv;
-	int new_proto, ret;
-
-	if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
-		err("could not acquire lock");
-		return -EINTR;
-	}
-
-	st->buf[0] = REQUEST_SET_RC;
-	st->buf[1] = 0;
-	st->buf[2] = 0;
-
-	/* Set the IR mode */
-	if (rc_type == RC_TYPE_RC5)
-		new_proto = 1;
-	else if (rc_type == RC_TYPE_NEC)
-		new_proto = 0;
-	else if (rc_type == RC_TYPE_RC6) {
-		if (st->fw_version < 0x10200) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		new_proto = 2;
-	} else {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	st->buf[1] = new_proto;
-
-	ret = dib0700_ctrl_wr(d, st->buf, 3);
-	if (ret < 0) {
-		err("ir protocol setup failed");
-		goto out;
-	}
-
-	d->props.rc.core.protocol = rc_type;
-
-out:
-	mutex_unlock(&d->usb_mutex);
-	return ret;
-}
-
-/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY_V1_20 10
-
-/* This is the structure of the RC response packet starting in firmware 1.20 */
-struct dib0700_rc_response {
-	u8 report_id;
-	u8 data_state;
-	union {
-		u16 system16;
-		struct {
-			u8 not_system;
-			u8 system;
-		};
-	};
-	u8 data;
-	u8 not_data;
-};
-#define RC_MSG_SIZE_V1_20 6
-
-static void dib0700_rc_urb_completion(struct urb *purb)
-{
-	struct dvb_usb_device *d = purb->context;
-	struct dib0700_rc_response *poll_reply;
-	u32 uninitialized_var(keycode);
-	u8 toggle;
-
-	deb_info("%s()\n", __func__);
-	if (d->rc_dev == NULL) {
-		/* This will occur if disable_rc_polling=1 */
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-		return;
-	}
-
-	poll_reply = purb->transfer_buffer;
-
-	if (purb->status < 0) {
-		deb_info("discontinuing polling\n");
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-		return;
-	}
-
-	if (purb->actual_length != RC_MSG_SIZE_V1_20) {
-		deb_info("malformed rc msg size=%d\n", purb->actual_length);
-		goto resubmit;
-	}
-
-	deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n",
-		 poll_reply->report_id, poll_reply->data_state,
-		 poll_reply->system, poll_reply->not_system,
-		 poll_reply->data, poll_reply->not_data,
-		 purb->actual_length);
-
-	switch (d->props.rc.core.protocol) {
-	case RC_TYPE_NEC:
-		toggle = 0;
-
-		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00)
-		    && (poll_reply->not_data == 0xff)) {
-			poll_reply->data_state = 2;
-			break;
-		}
-
-		if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
-			deb_data("NEC extended protocol\n");
-			/* NEC extended code - 24 bits */
-			keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data;
-		} else {
-			deb_data("NEC normal protocol\n");
-			/* normal NEC code - 16 bits */
-			keycode = poll_reply->system << 8 | poll_reply->data;
-		}
-
-		break;
-	default:
-		deb_data("RC5 protocol\n");
-		/* RC5 Protocol */
-		toggle = poll_reply->report_id;
-		keycode = poll_reply->system << 8 | poll_reply->data;
-
-		break;
-	}
-
-	if ((poll_reply->data + poll_reply->not_data) != 0xff) {
-		/* Key failed integrity check */
-		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply->system,
-		    poll_reply->data, poll_reply->not_data);
-		goto resubmit;
-	}
-
-	rc_keydown(d->rc_dev, keycode, toggle);
-
-resubmit:
-	/* Clean the buffer before we requeue */
-	memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
-
-	/* Requeue URB */
-	usb_submit_urb(purb, GFP_ATOMIC);
-}
-
-int dib0700_rc_setup(struct dvb_usb_device *d)
-{
-	struct dib0700_state *st = d->priv;
-	struct urb *purb;
-	int ret;
-
-	/* Poll-based. Don't initialize bulk mode */
-	if (st->fw_version < 0x10200)
-		return 0;
-
-	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
-	purb = usb_alloc_urb(0, GFP_KERNEL);
-	if (purb == NULL) {
-		err("rc usb alloc urb failed\n");
-		return -ENOMEM;
-	}
-
-	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
-	if (purb->transfer_buffer == NULL) {
-		err("rc kzalloc failed\n");
-		usb_free_urb(purb);
-		return -ENOMEM;
-	}
-
-	purb->status = -EINPROGRESS;
-	usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
-			  purb->transfer_buffer, RC_MSG_SIZE_V1_20,
-			  dib0700_rc_urb_completion, d);
-
-	ret = usb_submit_urb(purb, GFP_ATOMIC);
-	if (ret) {
-		err("rc submit urb failed\n");
-		kfree(purb->transfer_buffer);
-		usb_free_urb(purb);
-	}
-
-	return ret;
-}
-
-static int dib0700_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
-{
-	int i;
-	struct dvb_usb_device *dev;
-
-	for (i = 0; i < dib0700_device_count; i++)
-		if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE,
-		    &dev, adapter_nr) == 0) {
-			struct dib0700_state *st = dev->priv;
-			u32 hwversion, romversion, fw_version, fwtype;
-
-			dib0700_get_version(dev, &hwversion, &romversion,
-				&fw_version, &fwtype);
-
-			deb_info("Firmware version: %x, %d, 0x%x, %d\n",
-				hwversion, romversion, fw_version, fwtype);
-
-			st->fw_version = fw_version;
-			st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
-
-			/* Disable polling mode on newer firmwares */
-			if (st->fw_version >= 0x10200)
-				dev->props.rc.core.bulk_mode = true;
-			else
-				dev->props.rc.core.bulk_mode = false;
-
-			dib0700_rc_setup(dev);
-
-			return 0;
-		}
-
-	return -ENODEV;
-}
-
-static struct usb_driver dib0700_driver = {
-	.name       = "dvb_usb_dib0700",
-	.probe      = dib0700_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = dib0700_usb_id_table,
-};
-
-module_usb_driver(dib0700_driver);
-
-MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw");
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge");
-MODULE_VERSION("1.0");
-MODULE_LICENSE("GPL");