summaryrefslogtreecommitdiffstats
path: root/drivers/media/IR/ene_ir.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/IR/ene_ir.h')
-rw-r--r--drivers/media/IR/ene_ir.h235
1 files changed, 235 insertions, 0 deletions
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/IR/ene_ir.h
new file mode 100644
index 0000000..54c76af
--- /dev/null
+++ b/drivers/media/IR/ene_ir.h
@@ -0,0 +1,235 @@
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK 0x80 /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH 0x01 /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR 0x04 /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN 0x08 /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN 0x40 /* fan is used as normal input */
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT2_EN 0x20 /* TX ports */
+#define ENE_TX_PORT1 0xFC08
+#define ENE_TX_PORT1_EN 0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENEC_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */
+ /* while transmitting */
+#define ENE_CIR_CONF1_RX_ON 0x07 /* normal receiver enabled */
+#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 0x10 /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS 0x20 /* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW 0x80 /* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1 0xFEC9
+#define ENE_TX_INPUT2 0xFECA
+#define ENE_TX_PULSE_MASK 0x80 /* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK 0x7F
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+
+/* Current received carrier period */
+#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD 0xFECE /* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT 0x80 /* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE 0xFECF /* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_PLLFRH 0xFF16
+#define ENE_PLLFRL 0xFF17
+
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR 0x04
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW 34
+#define ENE_NORMAL_RX_HI 38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+ all purposes */
+#define ENE_TX_PERIOD_MAX 32 /* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN 16 /* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+ Minimal gap is 0x7F * sample period
+ Maximum gap depends on hardware.
+ For KB3926B, it is unlimited, for newer models its around
+ 250000, after which HW stops sending samples, and that is
+ not possible to change */
+
+/* Fan case:
+ Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+ And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP 250000
+#define ENE_MINGAP (127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "ene_ir"
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ int in_use;
+
+ /* hw IO settings */
+ unsigned long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ bool hw_learning_and_tx_capable; /* learning capable */
+ bool hw_gpio40_learning; /* gpio40 is learning */
+ bool hw_fan_as_normal_input; /* fan input is used as */
+ /* regular input */
+ /* HW state*/
+ int rx_pointer; /* hw pointer to rx buffer */
+ bool rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+
+ /* TX sample handling */
+ unsigned int tx_sample; /* current sample for TX */
+ bool tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int *tx_buffer; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /* TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+
+ /* RX settings */
+ bool learning_enabled; /* learning input enabled */
+ bool carrier_detect_enabled; /* carrier detect enabled */
+ int rx_period_adjust;
+};
OpenPOWER on IntegriCloud