diff options
Diffstat (limited to 'drivers/md/raid5.h')
| -rw-r--r-- | drivers/md/raid5.h | 98 |
1 files changed, 55 insertions, 43 deletions
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index e10c553..8d8e139 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -27,7 +27,7 @@ * The possible state transitions are: * * Empty -> Want - on read or write to get old data for parity calc - * Empty -> Dirty - on compute_parity to satisfy write/sync request.(RECONSTRUCT_WRITE) + * Empty -> Dirty - on compute_parity to satisfy write/sync request. * Empty -> Clean - on compute_block when computing a block for failed drive * Want -> Empty - on failed read * Want -> Clean - on successful completion of read request @@ -226,8 +226,11 @@ struct stripe_head { #endif } ops; struct r5dev { - struct bio req; - struct bio_vec vec; + /* rreq and rvec are used for the replacement device when + * writing data to both devices. + */ + struct bio req, rreq; + struct bio_vec vec, rvec; struct page *page; struct bio *toread, *read, *towrite, *written; sector_t sector; /* sector of this page */ @@ -239,7 +242,13 @@ struct stripe_head { * for handle_stripe. */ struct stripe_head_state { - int syncing, expanding, expanded; + /* 'syncing' means that we need to read all devices, either + * to check/correct parity, or to reconstruct a missing device. + * 'replacing' means we are replacing one or more drives and + * the source is valid at this point so we don't need to + * read all devices, just the replacement targets. + */ + int syncing, expanding, expanded, replacing; int locked, uptodate, to_read, to_write, failed, written; int to_fill, compute, req_compute, non_overwrite; int failed_num[2]; @@ -252,38 +261,41 @@ struct stripe_head_state { int handle_bad_blocks; }; -/* Flags */ -#define R5_UPTODATE 0 /* page contains current data */ -#define R5_LOCKED 1 /* IO has been submitted on "req" */ -#define R5_OVERWRITE 2 /* towrite covers whole page */ +/* Flags for struct r5dev.flags */ +enum r5dev_flags { + R5_UPTODATE, /* page contains current data */ + R5_LOCKED, /* IO has been submitted on "req" */ + R5_DOUBLE_LOCKED,/* Cannot clear R5_LOCKED until 2 writes complete */ + R5_OVERWRITE, /* towrite covers whole page */ /* and some that are internal to handle_stripe */ -#define R5_Insync 3 /* rdev && rdev->in_sync at start */ -#define R5_Wantread 4 /* want to schedule a read */ -#define R5_Wantwrite 5 -#define R5_Overlap 7 /* There is a pending overlapping request on this block */ -#define R5_ReadError 8 /* seen a read error here recently */ -#define R5_ReWrite 9 /* have tried to over-write the readerror */ + R5_Insync, /* rdev && rdev->in_sync at start */ + R5_Wantread, /* want to schedule a read */ + R5_Wantwrite, + R5_Overlap, /* There is a pending overlapping request + * on this block */ + R5_ReadError, /* seen a read error here recently */ + R5_ReWrite, /* have tried to over-write the readerror */ -#define R5_Expanded 10 /* This block now has post-expand data */ -#define R5_Wantcompute 11 /* compute_block in progress treat as - * uptodate - */ -#define R5_Wantfill 12 /* dev->toread contains a bio that needs - * filling - */ -#define R5_Wantdrain 13 /* dev->towrite needs to be drained */ -#define R5_WantFUA 14 /* Write should be FUA */ -#define R5_WriteError 15 /* got a write error - need to record it */ -#define R5_MadeGood 16 /* A bad block has been fixed by writing to it*/ -/* - * Write method - */ -#define RECONSTRUCT_WRITE 1 -#define READ_MODIFY_WRITE 2 -/* not a write method, but a compute_parity mode */ -#define CHECK_PARITY 3 -/* Additional compute_parity mode -- updates the parity w/o LOCKING */ -#define UPDATE_PARITY 4 + R5_Expanded, /* This block now has post-expand data */ + R5_Wantcompute, /* compute_block in progress treat as + * uptodate + */ + R5_Wantfill, /* dev->toread contains a bio that needs + * filling + */ + R5_Wantdrain, /* dev->towrite needs to be drained */ + R5_WantFUA, /* Write should be FUA */ + R5_WriteError, /* got a write error - need to record it */ + R5_MadeGood, /* A bad block has been fixed by writing to it */ + R5_ReadRepl, /* Will/did read from replacement rather than orig */ + R5_MadeGoodRepl,/* A bad block on the replacement device has been + * fixed by writing to it */ + R5_NeedReplace, /* This device has a replacement which is not + * up-to-date at this stripe. */ + R5_WantReplace, /* We need to update the replacement, we have read + * data in, and now is a good time to write it out. + */ +}; /* * Stripe state @@ -311,13 +323,14 @@ enum { /* * Operation request flags */ -#define STRIPE_OP_BIOFILL 0 -#define STRIPE_OP_COMPUTE_BLK 1 -#define STRIPE_OP_PREXOR 2 -#define STRIPE_OP_BIODRAIN 3 -#define STRIPE_OP_RECONSTRUCT 4 -#define STRIPE_OP_CHECK 5 - +enum { + STRIPE_OP_BIOFILL, + STRIPE_OP_COMPUTE_BLK, + STRIPE_OP_PREXOR, + STRIPE_OP_BIODRAIN, + STRIPE_OP_RECONSTRUCT, + STRIPE_OP_CHECK, +}; /* * Plugging: * @@ -344,13 +357,12 @@ enum { struct disk_info { - struct md_rdev *rdev; + struct md_rdev *rdev, *replacement; }; struct r5conf { struct hlist_head *stripe_hashtbl; struct mddev *mddev; - struct disk_info *spare; int chunk_sectors; int level, algorithm; int max_degraded; |
