diff options
Diffstat (limited to 'drivers/leds')
| -rw-r--r-- | drivers/leds/Kconfig | 70 | ||||
| -rw-r--r-- | drivers/leds/Makefile | 2 | ||||
| -rw-r--r-- | drivers/leds/led-class.c | 105 | ||||
| -rw-r--r-- | drivers/leds/led-triggers.c | 2 | ||||
| -rw-r--r-- | drivers/leds/leds-gpio.c | 2 | ||||
| -rw-r--r-- | drivers/leds/leds-lp5521.c | 837 | ||||
| -rw-r--r-- | drivers/leds/leds-lp5523.c | 1069 | ||||
| -rw-r--r-- | drivers/leds/leds-net5501.c | 2 | ||||
| -rw-r--r-- | drivers/leds/leds-ss4200.c | 1 | ||||
| -rw-r--r-- | drivers/leds/ledtrig-timer.c | 124 |
10 files changed, 2087 insertions, 127 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index cc2a88d..6f190f4 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -7,20 +7,20 @@ menuconfig NEW_LEDS This is not related to standard keyboard LEDs which are controlled via the input system. -if NEW_LEDS - config LEDS_CLASS - tristate "LED Class Support" + bool "LED Class Support" + depends on NEW_LEDS help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. -if LEDS_CLASS +if NEW_LEDS comment "LED drivers" config LEDS_88PM860X tristate "LED Support for Marvell 88PM860x PMIC" + depends on LEDS_CLASS depends on MFD_88PM860X help This option enables support for on-chip LED drivers found on Marvell @@ -28,6 +28,7 @@ config LEDS_88PM860X config LEDS_ATMEL_PWM tristate "LED Support using Atmel PWM outputs" + depends on LEDS_CLASS depends on ATMEL_PWM help This option enables support for LEDs driven using outputs @@ -35,6 +36,7 @@ config LEDS_ATMEL_PWM config LEDS_LOCOMO tristate "LED Support for Locomo device" + depends on LEDS_CLASS depends on SHARP_LOCOMO help This option enables support for the LEDs on Sharp Locomo. @@ -42,6 +44,7 @@ config LEDS_LOCOMO config LEDS_MIKROTIK_RB532 tristate "LED Support for Mikrotik Routerboard 532" + depends on LEDS_CLASS depends on MIKROTIK_RB532 help This option enables support for the so called "User LED" of @@ -49,6 +52,7 @@ config LEDS_MIKROTIK_RB532 config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" + depends on LEDS_CLASS depends on ARCH_S3C2410 help This option enables support for LEDs connected to GPIO lines @@ -56,12 +60,14 @@ config LEDS_S3C24XX config LEDS_AMS_DELTA tristate "LED Support for the Amstrad Delta (E3)" + depends on LEDS_CLASS depends on MACH_AMS_DELTA help This option enables support for the LEDs on Amstrad Delta (E3). config LEDS_NET48XX tristate "LED Support for Soekris net48xx series Error LED" + depends on LEDS_CLASS depends on SCx200_GPIO help This option enables support for the Soekris net4801 and net4826 error @@ -79,18 +85,21 @@ config LEDS_NET5501 config LEDS_FSG tristate "LED Support for the Freecom FSG-3" + depends on LEDS_CLASS depends on MACH_FSG help This option enables support for the LEDs on the Freecom FSG-3. config LEDS_WRAP tristate "LED Support for the WRAP series LEDs" + depends on LEDS_CLASS depends on SCx200_GPIO help This option enables support for the PCEngines WRAP programmable LEDs. config LEDS_ALIX2 tristate "LED Support for ALIX.2 and ALIX.3 series" + depends on LEDS_CLASS depends on X86 && !GPIO_CS5535 && !CS5535_GPIO help This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. @@ -98,12 +107,14 @@ config LEDS_ALIX2 config LEDS_H1940 tristate "LED Support for iPAQ H1940 device" + depends on LEDS_CLASS depends on ARCH_H1940 help This option enables support for the LEDs on the h1940. config LEDS_COBALT_QUBE tristate "LED Support for the Cobalt Qube series front LED" + depends on LEDS_CLASS depends on MIPS_COBALT help This option enables support for the front LED on Cobalt Qube series @@ -117,6 +128,7 @@ config LEDS_COBALT_RAQ config LEDS_SUNFIRE tristate "LED support for SunFire servers." + depends on LEDS_CLASS depends on SPARC64 select LEDS_TRIGGERS help @@ -125,6 +137,7 @@ config LEDS_SUNFIRE config LEDS_HP6XX tristate "LED Support for the HP Jornada 6xx" + depends on LEDS_CLASS depends on SH_HP6XX help This option enables LED support for the handheld @@ -132,6 +145,7 @@ config LEDS_HP6XX config LEDS_PCA9532 tristate "LED driver for PCA9532 dimmer" + depends on LEDS_CLASS depends on I2C && INPUT && EXPERIMENTAL help This option enables support for NXP pca9532 @@ -140,6 +154,7 @@ config LEDS_PCA9532 config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" + depends on LEDS_CLASS depends on GENERIC_GPIO help This option enables support for the LEDs connected to GPIO @@ -167,6 +182,7 @@ config LEDS_GPIO_OF config LEDS_LP3944 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" + depends on LEDS_CLASS depends on I2C help This option enables support for LEDs connected to the National @@ -176,8 +192,27 @@ config LEDS_LP3944 To compile this driver as a module, choose M here: the module will be called leds-lp3944. +config LEDS_LP5521 + tristate "LED Support for N.S. LP5521 LED driver chip" + depends on LEDS_CLASS && I2C + help + If you say yes here you get support for the National Semiconductor + LP5521 LED driver. It is 3 channel chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + +config LEDS_LP5523 + tristate "LED Support for N.S. LP5523 LED driver chip" + depends on LEDS_CLASS && I2C + help + If you say yes here you get support for the National Semiconductor + LP5523 LED driver. It is 9 channel chip with programmable engines. + Driver provides direct control via LED class and interface for + programming the engines. + config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook" + depends on LEDS_CLASS depends on X86 && SERIO_I8042 && DMI help This driver makes the mail LED accessible from userspace @@ -208,6 +243,7 @@ config LEDS_CLEVO_MAIL config LEDS_PCA955X tristate "LED Support for PCA955x I2C chips" + depends on LEDS_CLASS depends on I2C help This option enables support for LEDs connected to PCA955x @@ -216,6 +252,7 @@ config LEDS_PCA955X config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" + depends on LEDS_CLASS depends on MFD_WM831X help This option enables support for the status LEDs of the WM831x @@ -223,6 +260,7 @@ config LEDS_WM831X_STATUS config LEDS_WM8350 tristate "LED Support for WM8350 AudioPlus PMIC" + depends on LEDS_CLASS depends on MFD_WM8350 help This option enables support for LEDs driven by the Wolfson @@ -230,6 +268,7 @@ config LEDS_WM8350 config LEDS_DA903X tristate "LED Support for DA9030/DA9034 PMIC" + depends on LEDS_CLASS depends on PMIC_DA903X help This option enables support for on-chip LED drivers found @@ -237,6 +276,7 @@ config LEDS_DA903X config LEDS_DAC124S085 tristate "LED Support for DAC124S085 SPI DAC" + depends on LEDS_CLASS depends on SPI help This option enables support for DAC124S085 SPI DAC from NatSemi, @@ -244,18 +284,21 @@ config LEDS_DAC124S085 config LEDS_PWM tristate "PWM driven LED Support" + depends on LEDS_CLASS depends on HAVE_PWM help This option enables support for pwm driven LEDs config LEDS_REGULATOR tristate "REGULATOR driven LED support" + depends on LEDS_CLASS depends on REGULATOR help This option enables support for regulator driven LEDs. config LEDS_BD2802 tristate "LED driver for BD2802 RGB LED" + depends on LEDS_CLASS depends on I2C help This option enables support for BD2802GU RGB LED driver chips @@ -263,6 +306,7 @@ config LEDS_BD2802 config LEDS_INTEL_SS4200 tristate "LED driver for Intel NAS SS4200 series" + depends on LEDS_CLASS depends on PCI && DMI help This option enables support for the Intel SS4200 series of @@ -272,6 +316,7 @@ config LEDS_INTEL_SS4200 config LEDS_LT3593 tristate "LED driver for LT3593 controllers" + depends on LEDS_CLASS depends on GENERIC_GPIO help This option enables support for LEDs driven by a Linear Technology @@ -280,6 +325,7 @@ config LEDS_LT3593 config LEDS_ADP5520 tristate "LED Support for ADP5520/ADP5501 PMIC" + depends on LEDS_CLASS depends on PMIC_ADP5520 help This option enables support for on-chip LED drivers found @@ -290,6 +336,7 @@ config LEDS_ADP5520 config LEDS_DELL_NETBOOKS tristate "External LED on Dell Business Netbooks" + depends on LEDS_CLASS depends on X86 && ACPI_WMI help This adds support for the Latitude 2100 and similar @@ -297,6 +344,7 @@ config LEDS_DELL_NETBOOKS config LEDS_MC13783 tristate "LED Support for MC13783 PMIC" + depends on LEDS_CLASS depends on MFD_MC13783 help This option enable support for on-chip LED drivers found @@ -304,6 +352,7 @@ config LEDS_MC13783 config LEDS_NS2 tristate "LED support for Network Space v2 GPIO LEDs" + depends on LEDS_CLASS depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2 default y help @@ -322,17 +371,17 @@ config LEDS_NETXBIG config LEDS_TRIGGERS bool "LED Trigger support" + depends on LEDS_CLASS help This option enables trigger support for the leds class. These triggers allow kernel events to drive the LEDs and can be configured via sysfs. If unsure, say Y. -if LEDS_TRIGGERS - comment "LED Triggers" config LEDS_TRIGGER_TIMER tristate "LED Timer Trigger" + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a programmable timer via sysfs. Some LED hardware can be programmed to start @@ -344,12 +393,14 @@ config LEDS_TRIGGER_TIMER config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" depends on IDE_GD_ATA + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by IDE disk activity. If unsure, say Y. config LEDS_TRIGGER_HEARTBEAT tristate "LED Heartbeat Trigger" + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a CPU load average. The flash frequency is a hyperbolic function of the 1-minute @@ -358,6 +409,7 @@ config LEDS_TRIGGER_HEARTBEAT config LEDS_TRIGGER_BACKLIGHT tristate "LED backlight Trigger" + depends on LEDS_TRIGGERS help This allows LEDs to be controlled as a backlight device: they turn off and on when the display is blanked and unblanked. @@ -366,6 +418,7 @@ config LEDS_TRIGGER_BACKLIGHT config LEDS_TRIGGER_GPIO tristate "LED GPIO Trigger" + depends on LEDS_TRIGGERS depends on GPIOLIB help This allows LEDs to be controlled by gpio events. It's good @@ -378,6 +431,7 @@ config LEDS_TRIGGER_GPIO config LEDS_TRIGGER_DEFAULT_ON tristate "LED Default ON Trigger" + depends on LEDS_TRIGGERS help This allows LEDs to be initialised in the ON state. If unsure, say Y. @@ -385,8 +439,4 @@ config LEDS_TRIGGER_DEFAULT_ON comment "iptables trigger is under Netfilter config (LED target)" depends on LEDS_TRIGGERS -endif # LEDS_TRIGGERS - -endif # LEDS_CLASS - endif # NEW_LEDS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 9c96db4..aae6989 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -23,6 +23,8 @@ obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o +obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o +obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index 2606600..211e21f 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = { __ATTR_NULL, }; +static void led_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (void *)data; + unsigned long brightness; + unsigned long delay; + + if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) { + led_set_brightness(led_cdev, LED_OFF); + return; + } + + brightness = led_get_brightness(led_cdev); + if (!brightness) { + /* Time to switch the LED on. */ + brightness = led_cdev->blink_brightness; + delay = led_cdev->blink_delay_on; + } else { + /* Store the current brightness value to be able + * to restore it when the delay_off period is over. + */ + led_cdev->blink_brightness = brightness; + brightness = LED_OFF; + delay = led_cdev->blink_delay_off; + } + + led_set_brightness(led_cdev, brightness); + + mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay)); +} + +static void led_stop_software_blink(struct led_classdev *led_cdev) +{ + /* deactivate previous settings */ + del_timer_sync(&led_cdev->blink_timer); + led_cdev->blink_delay_on = 0; + led_cdev->blink_delay_off = 0; +} + +static void led_set_software_blink(struct led_classdev *led_cdev, + unsigned long delay_on, + unsigned long delay_off) +{ + int current_brightness; + + current_brightness = led_get_brightness(led_cdev); + if (current_brightness) + led_cdev->blink_brightness = current_brightness; + if (!led_cdev->blink_brightness) + led_cdev->blink_brightness = led_cdev->max_brightness; + + if (delay_on == led_cdev->blink_delay_on && + delay_off == led_cdev->blink_delay_off) + return; + + led_stop_software_blink(led_cdev); + + led_cdev->blink_delay_on = delay_on; + led_cdev->blink_delay_off = delay_off; + + /* never on - don't blink */ + if (!delay_on) + return; + + /* never off - just set to brightness */ + if (!delay_off) { + led_set_brightness(led_cdev, led_cdev->blink_brightness); + return; + } + + mod_timer(&led_cdev->blink_timer, jiffies + 1); +} + + /** * led_classdev_suspend - suspend an led_classdev. * @led_cdev: the led_classdev to suspend. @@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) led_update_brightness(led_cdev); + init_timer(&led_cdev->blink_timer); + led_cdev->blink_timer.function = led_timer_function; + led_cdev->blink_timer.data = (unsigned long)led_cdev; + #ifdef CONFIG_LEDS_TRIGGERS led_trigger_set_default(led_cdev); #endif @@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) return 0; } - EXPORT_SYMBOL_GPL(led_classdev_register); /** @@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev) up_write(&led_cdev->trigger_lock); #endif + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); + device_unregister(led_cdev->dev); down_write(&leds_list_lock); @@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev) } EXPORT_SYMBOL_GPL(led_classdev_unregister); +void led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + if (led_cdev->blink_set && + led_cdev->blink_set(led_cdev, delay_on, delay_off)) + return; + + /* blink with 1 Hz as default if nothing specified */ + if (!*delay_on && !*delay_off) + *delay_on = *delay_off = 500; + + led_set_software_blink(led_cdev, *delay_on, *delay_off); +} +EXPORT_SYMBOL(led_blink_set); + +void led_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + led_stop_software_blink(led_cdev); + led_cdev->brightness_set(led_cdev, brightness); +} +EXPORT_SYMBOL(led_brightness_set); + static int __init leds_init(void) { leds_class = class_create(THIS_MODULE, "leds"); diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c index f1c00db..c41eb61 100644 --- a/drivers/leds/led-triggers.c +++ b/drivers/leds/led-triggers.c @@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger) if (led_cdev->trigger->deactivate) led_cdev->trigger->deactivate(led_cdev); led_cdev->trigger = NULL; - led_set_brightness(led_cdev, LED_OFF); + led_brightness_set(led_cdev, LED_OFF); } if (trigger) { write_lock_irqsave(&trigger->leddev_list_lock, flags); diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index ea57e05..4d9fa38 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -316,7 +316,7 @@ static struct of_platform_driver of_gpio_leds_driver = { static int __init gpio_led_init(void) { - int ret; + int ret = 0; #ifdef CONFIG_LEDS_GPIO_PLATFORM ret = platform_driver_register(&gpio_led_driver); diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c new file mode 100644 index 0000000..33facd0 --- /dev/null +++ b/drivers/leds/leds-lp5521.c @@ -0,0 +1,837 @@ +/* + * LP5521 LED chip driver. + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/leds-lp5521.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#define LP5521_PROGRAM_LENGTH 32 /* in bytes */ + +#define LP5521_MAX_LEDS 3 /* Maximum number of LEDs */ +#define LP5521_MAX_ENGINES 3 /* Maximum number of engines */ + +#define LP5521_ENG_MASK_BASE 0x30 /* 00110000 */ +#define LP5521_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5521_CMD_LOAD 0x15 /* 00010101 */ +#define LP5521_CMD_RUN 0x2a /* 00101010 */ +#define LP5521_CMD_DIRECT 0x3f /* 00111111 */ +#define LP5521_CMD_DISABLED 0x00 /* 00000000 */ + +/* Registers */ +#define LP5521_REG_ENABLE 0x00 +#define LP5521_REG_OP_MODE 0x01 +#define LP5521_REG_R_PWM 0x02 +#define LP5521_REG_G_PWM 0x03 +#define LP5521_REG_B_PWM 0x04 +#define LP5521_REG_R_CURRENT 0x05 +#define LP5521_REG_G_CURRENT 0x06 +#define LP5521_REG_B_CURRENT 0x07 +#define LP5521_REG_CONFIG 0x08 +#define LP5521_REG_R_CHANNEL_PC 0x09 +#define LP5521_REG_G_CHANNEL_PC 0x0A +#define LP5521_REG_B_CHANNEL_PC 0x0B +#define LP5521_REG_STATUS 0x0C +#define LP5521_REG_RESET 0x0D +#define LP5521_REG_GPO 0x0E +#define LP5521_REG_R_PROG_MEM 0x10 +#define LP5521_REG_G_PROG_MEM 0x30 +#define LP5521_REG_B_PROG_MEM 0x50 + +#define LP5521_PROG_MEM_BASE LP5521_REG_R_PROG_MEM +#define LP5521_PROG_MEM_SIZE 0x20 + +/* Base register to set LED current */ +#define LP5521_REG_LED_CURRENT_BASE LP5521_REG_R_CURRENT + +/* Base register to set the brightness */ +#define LP5521_REG_LED_PWM_BASE LP5521_REG_R_PWM + +/* Bits in ENABLE register */ +#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */ +#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */ +#define LP5521_EXEC_RUN 0x2A + +/* Bits in CONFIG register */ +#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */ +#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */ +#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */ +#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */ +#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */ +#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */ +#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */ +#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */ +#define LP5521_CLK_INT 1 /* Internal clock */ +#define LP5521_CLK_AUTO 2 /* Automatic clock selection */ + +/* Status */ +#define LP5521_EXT_CLK_USED 0x08 + +struct lp5521_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 engine_mask; +}; + +struct lp5521_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5521_chip { + struct lp5521_platform_data *pdata; + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5521_engine engines[LP5521_MAX_ENGINES]; + struct lp5521_led leds[LP5521_MAX_LEDS]; + u8 num_channels; + u8 num_leds; +}; + +static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct lp5521_led, cdev); +} + +static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) +{ + return container_of(engine, struct lp5521_chip, + engines[engine->id - 1]); +} + +static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) +{ + return container_of(led, struct lp5521_chip, + leds[led->id]); +} + +static void lp5521_led_brightness_work(struct work_struct *work); + +static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + /* Only transition between RUN and DIRECT mode are handled here */ + if (mode == LP5521_CMD_LOAD) + return 0; + + if (mode == LP5521_CMD_DISABLED) + mode = LP5521_CMD_DIRECT; + + ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state); + + /* set mode only for this engine */ + engine_state &= ~(engine->engine_mask); + mode &= engine->engine_mask; + engine_state |= mode; + ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state); + + return ret; +} + +static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) +{ + struct lp5521_chip *chip = engine_to_lp5521(eng); + struct i2c_client *client = chip->client; + int ret; + int addr; + u8 mode; + + /* move current engine to direct mode and remember the state */ + ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); + ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); + + /* For loading, all the engines to load mode */ + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); + lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); + + addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; + i2c_smbus_write_i2c_block_data(client, + addr, + LP5521_PROG_MEM_SIZE, + pattern); + + ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode); + return ret; +} + +static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr) +{ + return lp5521_write(chip->client, + LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + curr); +} + +static void lp5521_init_engine(struct lp5521_chip *chip, + const struct attribute_group *attr_group) +{ + int i; + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + chip->engines[i].id = i + 1; + chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2); + chip->engines[i].prog_page = i; + chip->engines[i].attributes = &attr_group[i]; + } +} + +static int lp5521_configure(struct i2c_client *client, + const struct attribute_group *attr_group) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + lp5521_init_engine(chip, attr_group); + + /* Set all PWMs to direct control mode */ + ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); + + /* Enable auto-powersave, set charge pump to auto, red to battery */ + ret |= lp5521_write(client, LP5521_REG_CONFIG, + LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT); + + /* Initialize all channels PWM to zero -> leds off */ + ret |= lp5521_write(client, LP5521_REG_R_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_G_PWM, 0); + ret |= lp5521_write(client, LP5521_REG_B_PWM, 0); + + /* Set engines are set to run state when OP_MODE enables engines */ + ret |= lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | + LP5521_EXEC_RUN); + /* enable takes 500us. 1 - 2 ms leaves some margin */ + usleep_range(1000, 2000); + + return ret; +} + +static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf) +{ + int ret; + u8 status; + + ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status); + if (ret < 0) + return ret; + + /* Check that ext clock is really in use if requested */ + if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT) + if ((status & LP5521_EXT_CLK_USED) == 0) + return -EIO; + return 0; +} + +static void lp5521_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5521_led *led = cdev_to_led(cdev); + led->brightness = (u8)brightness; + schedule_work(&led->brightness_work); +} + +static void lp5521_led_brightness_work(struct work_struct *work) +{ + struct lp5521_led *led = container_of(work, + struct lp5521_led, + brightness_work); + struct lp5521_chip *chip = led_to_lp5521(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + mutex_unlock(&chip->lock); +} + +/* Detect the chip by setting its ENABLE register and reading it back. */ +static int lp5521_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5521_write(client, LP5521_REG_ENABLE, + LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); + if (ret) + return ret; + /* enable takes 500us. 1 - 2 ms leaves some margin */ + usleep_range(1000, 2000); + ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)) + return -ENODEV; + + return 0; +} + +/* Set engine mode and create appropriate sysfs attributes, if required. */ +static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5521_CMD_RUN) + return 0; + + if (mode == LP5521_CMD_RUN) { + ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN); + } else if (mode == LP5521_CMD_LOAD) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + lp5521_set_engine_mode(engine, LP5521_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5521_CMD_DISABLED) { + lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +static int lp5521_do_store_load(struct lp5521_engine *engine, + const char *buf, size_t len) +{ + struct lp5521_chip *chip = engine_to_lp5521(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5521_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + ret = lp5521_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + return lp5521_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5521_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5521_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5521_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct lp5521_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5521_set_mode(engine, LP5521_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5521_set_mode(engine, LP5521_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5521_set_mode(engine, LP5521_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5521_led *led = cdev_to_led(led_cdev); + struct lp5521_chip *chip = led_to_lp5521(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5521_set_led_current(chip, led->id, curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +static ssize_t lp5521_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5521_chip *chip = i2c_get_clientdata(client); + int ret; + + mutex_lock(&chip->lock); + ret = lp5521_run_selftest(chip, buf); + mutex_unlock(&chip->lock); + return sprintf(buf, "%s\n", ret ? "FAIL" : "OK"); +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5521_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5521_led_attribute_group = { + .attrs = lp5521_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL); + +static struct attribute *lp5521_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5521_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + NULL +}; + +static struct attribute *lp5521_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + NULL +}; + +static struct attribute *lp5521_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + NULL +}; + +static const struct attribute_group lp5521_group = { + .attrs = lp5521_attributes, +}; + +static const struct attribute_group lp5521_engine_group[] = { + {.attrs = lp5521_engine1_attributes }, + {.attrs = lp5521_engine2_attributes }, + {.attrs = lp5521_engine3_attributes }, +}; + +static int lp5521_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + return sysfs_create_group(&dev->kobj, &lp5521_group); +} + +static void lp5521_unregister_sysfs(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5521_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + if (chip->engines[i].mode == LP5521_CMD_LOAD) + sysfs_remove_group(&dev->kobj, + chip->engines[i].attributes); + } + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5521_led_attribute_group); +} + +static int __init lp5521_init_led(struct lp5521_led *led, + struct i2c_client *client, + int chan, struct lp5521_platform_data *pdata) +{ + struct device *dev = &client->dev; + char name[32]; + int res; + + if (chan >= LP5521_MAX_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current == 0) + return 0; + + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5521_MAX_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5521_MAX_LEDS - 1); + return -EINVAL; + } + + snprintf(name, sizeof(name), "%s:channel%d", client->name, chan); + led->cdev.brightness_set = lp5521_set_brightness; + led->cdev.name = name; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", chan); + return res; + } + + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5521_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + return 0; +} + +static int lp5521_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5521_chip *chip; + struct lp5521_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 2000); /* Keep enable down at least 1ms */ + pdata->enable(1); + usleep_range(1000, 2000); /* 500us abs min. */ + } + + lp5521_write(client, LP5521_REG_RESET, 0xff); + usleep_range(10000, 20000); /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ + ret = lp5521_detect(client); + + if (ret) { + dev_err(&client->dev, "Chip not found\n"); + goto fail2; + } + + dev_info(&client->dev, "%s programmable led chip found\n", id->name); + + ret = lp5521_configure(client, lp5521_engine_group); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5521_init_led(&chip->leds[led], client, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set initial LED current */ + lp5521_set_led_current(chip, led, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5521_led_brightness_work); + + led++; + } + + ret = lp5521_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5521_remove(struct i2c_client *client) +{ + struct lp5521_chip *chip = i2c_get_clientdata(client); + int i; + + lp5521_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5521_id[] = { + { "lp5521", 0 }, /* Three channel chip */ + { } +}; +MODULE_DEVICE_TABLE(i2c, lp5521_id); + +static struct i2c_driver lp5521_driver = { + .driver = { + .name = "lp5521", + }, + .probe = lp5521_probe, + .remove = lp5521_remove, + .id_table = lp5521_id, +}; + +static int __init lp5521_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5521_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5521 driver failed\n"); + + return ret; +} + +static void __exit lp5521_exit(void) +{ + i2c_del_driver(&lp5521_driver); +} + +module_init(lp5521_init); +module_exit(lp5521_exit); + +MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo"); +MODULE_DESCRIPTION("LP5521 LED engine"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c new file mode 100644 index 0000000..0cc4ead --- /dev/null +++ b/drivers/leds/leds-lp5523.c @@ -0,0 +1,1069 @@ +/* + * lp5523.c - LP5523 LED Driver + * + * Copyright (C) 2010 Nokia Corporation + * + * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/leds.h> +#include <linux/leds-lp5523.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#define LP5523_REG_ENABLE 0x00 +#define LP5523_REG_OP_MODE 0x01 +#define LP5523_REG_RATIOMETRIC_MSB 0x02 +#define LP5523_REG_RATIOMETRIC_LSB 0x03 +#define LP5523_REG_ENABLE_LEDS_MSB 0x04 +#define LP5523_REG_ENABLE_LEDS_LSB 0x05 +#define LP5523_REG_LED_CNTRL_BASE 0x06 +#define LP5523_REG_LED_PWM_BASE 0x16 +#define LP5523_REG_LED_CURRENT_BASE 0x26 +#define LP5523_REG_CONFIG 0x36 +#define LP5523_REG_CHANNEL1_PC 0x37 +#define LP5523_REG_CHANNEL2_PC 0x38 +#define LP5523_REG_CHANNEL3_PC 0x39 +#define LP5523_REG_STATUS 0x3a +#define LP5523_REG_GPO 0x3b +#define LP5523_REG_VARIABLE 0x3c +#define LP5523_REG_RESET 0x3d +#define LP5523_REG_TEMP_CTRL 0x3e +#define LP5523_REG_TEMP_READ 0x3f +#define LP5523_REG_TEMP_WRITE 0x40 +#define LP5523_REG_LED_TEST_CTRL 0x41 +#define LP5523_REG_LED_TEST_ADC 0x42 +#define LP5523_REG_ENG1_VARIABLE 0x45 +#define LP5523_REG_ENG2_VARIABLE 0x46 +#define LP5523_REG_ENG3_VARIABLE 0x47 +#define LP5523_REG_MASTER_FADER1 0x48 +#define LP5523_REG_MASTER_FADER2 0x49 +#define LP5523_REG_MASTER_FADER3 0x4a +#define LP5523_REG_CH1_PROG_START 0x4c +#define LP5523_REG_CH2_PROG_START 0x4d +#define LP5523_REG_CH3_PROG_START 0x4e +#define LP5523_REG_PROG_PAGE_SEL 0x4f +#define LP5523_REG_PROG_MEM 0x50 + +#define LP5523_CMD_LOAD 0x15 /* 00010101 */ +#define LP5523_CMD_RUN 0x2a /* 00101010 */ +#define LP5523_CMD_DISABLED 0x00 /* 00000000 */ + +#define LP5523_ENABLE 0x40 +#define LP5523_AUTO_INC 0x40 +#define LP5523_PWR_SAVE 0x20 +#define LP5523_PWM_PWR_SAVE 0x04 +#define LP5523_CP_1 0x08 +#define LP5523_CP_1_5 0x10 +#define LP5523_CP_AUTO 0x18 +#define LP5523_INT_CLK 0x01 +#define LP5523_AUTO_CLK 0x02 +#define LP5523_EN_LEDTEST 0x80 +#define LP5523_LEDTEST_DONE 0x80 + +#define LP5523_DEFAULT_CURRENT 50 /* microAmps */ +#define LP5523_PROGRAM_LENGTH 32 /* in bytes */ +#define LP5523_PROGRAM_PAGES 6 +#define LP5523_ADC_SHORTCIRC_LIM 80 + +#define LP5523_LEDS 9 +#define LP5523_ENGINES 3 + +#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */ + +#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */ + +#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING + +#define LP5523_EXT_CLK_USED 0x08 + +#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led))) +#define SHIFT_MASK(id) (((id) - 1) * 2) + +struct lp5523_engine { + const struct attribute_group *attributes; + int id; + u8 mode; + u8 prog_page; + u8 mux_page; + u16 led_mux; + u8 engine_mask; +}; + +struct lp5523_led { + int id; + u8 chan_nr; + u8 led_current; + u8 max_current; + struct led_classdev cdev; + struct work_struct brightness_work; + u8 brightness; +}; + +struct lp5523_chip { + struct mutex lock; /* Serialize control */ + struct i2c_client *client; + struct lp5523_engine engines[LP5523_ENGINES]; + struct lp5523_led leds[LP5523_LEDS]; + struct lp5523_platform_data *pdata; + u8 num_channels; + u8 num_leds; +}; + +static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct lp5523_led, cdev); +} + +static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) +{ + return container_of(engine, struct lp5523_chip, + engines[engine->id - 1]); +} + +static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) +{ + return container_of(led, struct lp5523_chip, + leds[led->id]); +} + +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode); +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern); + +static void lp5523_led_brightness_work(struct work_struct *work); + +static int lp5523_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf) +{ + s32 ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) + return -EIO; + + *buf = ret; + return 0; +} + +static int lp5523_detect(struct i2c_client *client) +{ + int ret; + u8 buf; + + ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40); + if (ret) + return ret; + ret = lp5523_read(client, LP5523_REG_ENABLE, &buf); + if (ret) + return ret; + if (buf == 0x40) + return 0; + else + return -ENODEV; +} + +static int lp5523_configure(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int ret = 0; + u8 status; + + /* one pattern per engine setting led mux start and stop addresses */ + u8 pattern[][LP5523_PROGRAM_LENGTH] = { + { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0}, + { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, + }; + + ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); + /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ + usleep_range(1000, 2000); + + ret |= lp5523_write(client, LP5523_REG_CONFIG, + LP5523_AUTO_INC | LP5523_PWR_SAVE | + LP5523_CP_AUTO | LP5523_AUTO_CLK | + LP5523_PWM_PWR_SAVE); + + /* turn on all leds */ + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01); + ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff); + + /* hardcode 32 bytes of memory for each engine from program memory */ + ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00); + ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10); + ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20); + + /* write led mux address space for each channel */ + ret |= lp5523_load_program(&chip->engines[0], pattern[0]); + ret |= lp5523_load_program(&chip->engines[1], pattern[1]); + ret |= lp5523_load_program(&chip->engines[2], pattern[2]); + + if (ret) { + dev_err(&client->dev, "could not load mux programs\n"); + return -1; + } + + /* set all engines exec state and mode to run 00101010 */ + ret |= lp5523_write(client, LP5523_REG_ENABLE, + (LP5523_CMD_RUN | LP5523_ENABLE)); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN); + + if (ret) { + dev_err(&client->dev, "could not start mux programs\n"); + return -1; + } + + /* Let the programs run for couple of ms and check the engine status */ + usleep_range(3000, 6000); + lp5523_read(client, LP5523_REG_STATUS, &status); + status &= LP5523_ENG_STATUS_MASK; + + if (status == LP5523_ENG_STATUS_MASK) { + dev_dbg(&client->dev, "all engines configured\n"); + } else { + dev_info(&client->dev, "status == %x\n", status); + dev_err(&client->dev, "cound not configure LED engine\n"); + return -1; + } + + dev_info(&client->dev, "disabling engines\n"); + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED); + + return ret; +} + +static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + u8 engine_state; + + ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state); + if (ret) + goto fail; + + engine_state &= ~(engine->engine_mask); + + /* set mode only for this engine */ + mode &= engine->engine_mask; + + engine_state |= mode; + + ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state); +fail: + return ret; +} + +static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM, + (u8)(mux >> 8)); + ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux)); + engine->led_mux = mux; + + return ret; +} + +static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + + int ret = 0; + + ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, + engine->prog_page); + ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM, + LP5523_PROGRAM_LENGTH, pattern); + + return ret; +} + +static int lp5523_run_program(struct lp5523_engine *engine) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret; + + ret = lp5523_write(client, LP5523_REG_ENABLE, + LP5523_CMD_RUN | LP5523_ENABLE); + if (ret) + goto fail; + + ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN); +fail: + return ret; +} + +static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len) +{ + int i; + u16 tmp_mux = 0; + len = len < LP5523_LEDS ? len : LP5523_LEDS; + for (i = 0; i < len; i++) { + switch (buf[i]) { + case '1': + tmp_mux |= (1 << i); + break; + case '0': + break; + case '\n': + i = len; + break; + default: + return -1; + } + } + *mux = tmp_mux; + + return 0; +} + +static void lp5523_mux_to_array(u16 led_mux, char *array) +{ + int i, pos = 0; + for (i = 0; i < LP5523_LEDS; i++) + pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i)); + + array[pos] = '\0'; +} + +/*--------------------------------------------------------------*/ +/* Sysfs interface */ +/*--------------------------------------------------------------*/ + +static ssize_t show_engine_leds(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + char mux[LP5523_LEDS + 1]; + + lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux); + + return sprintf(buf, "%s\n", mux); +} + +#define show_leds(nr) \ +static ssize_t show_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_leds(dev, attr, buf, nr); \ +} +show_leds(1) +show_leds(2) +show_leds(3) + +static ssize_t store_engine_leds(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + u16 mux = 0; + + if (lp5523_mux_parse(buf, &mux, len)) + return -EINVAL; + + if (lp5523_load_mux(&chip->engines[nr - 1], mux)) + return -EINVAL; + + return len; +} + +#define store_leds(nr) \ +static ssize_t store_engine##nr##_leds(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_leds(dev, attr, buf, len, nr); \ +} +store_leds(1) +store_leds(2) +store_leds(3) + +static ssize_t lp5523_selftest(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i, ret, pos = 0; + int led = 0; + u8 status, adc, vdd; + + mutex_lock(&chip->lock); + + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (ret < 0) + goto fail; + + /* Check that ext clock is really in use if requested */ + if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT)) + if ((status & LP5523_EXT_CLK_USED) == 0) + goto fail; + + /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ + lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | 16); + usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 6000); /* Was not ready. Wait little bit */ + + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd); + vdd--; /* There may be some fluctuation in measurement */ + + for (i = 0; i < LP5523_LEDS; i++) { + /* Skip non-existing channels */ + if (chip->pdata->led_config[i].led_current == 0) + continue; + + /* Set default current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->pdata->led_config[i].led_current); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff); + /* let current stabilize 2 - 4ms before measurements start */ + usleep_range(2000, 4000); + lp5523_write(chip->client, + LP5523_REG_LED_TEST_CTRL, + LP5523_EN_LEDTEST | i); + /* ADC conversion time is 2.7 ms typically */ + usleep_range(3000, 6000); + ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); + if (!(status & LP5523_LEDTEST_DONE)) + usleep_range(3000, 6000);/* Was not ready. Wait. */ + ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc); + + if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) + pos += sprintf(buf + pos, "LED %d FAIL\n", i); + + lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00); + + /* Restore current */ + lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + i, + chip->leds[led].led_current); + led++; + } + if (pos == 0) + pos = sprintf(buf, "OK\n"); + goto release_lock; +fail: + pos = sprintf(buf, "FAIL\n"); + +release_lock: + mutex_unlock(&chip->lock); + + return pos; +} + +static void lp5523_set_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct lp5523_led *led = cdev_to_led(cdev); + + led->brightness = (u8)brightness; + + schedule_work(&led->brightness_work); +} + +static void lp5523_led_brightness_work(struct work_struct *work) +{ + struct lp5523_led *led = container_of(work, + struct lp5523_led, + brightness_work); + struct lp5523_chip *chip = led_to_lp5523(led); + struct i2c_client *client = chip->client; + + mutex_lock(&chip->lock); + + lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr, + led->brightness); + + mutex_unlock(&chip->lock); +} + +static int lp5523_do_store_load(struct lp5523_engine *engine, + const char *buf, size_t len) +{ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + int ret, nrchars, offset = 0, i = 0; + char c[3]; + unsigned cmd; + u8 pattern[LP5523_PROGRAM_LENGTH] = {0}; + + while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) { + /* separate sscanfs because length is working only for %s */ + ret = sscanf(buf + offset, "%2s%n ", c, &nrchars); + ret = sscanf(c, "%2x", &cmd); + if (ret != 1) + goto fail; + pattern[i] = (u8)cmd; + + offset += nrchars; + i++; + } + + /* Each instruction is 16bit long. Check that length is even */ + if (i % 2) + goto fail; + + mutex_lock(&chip->lock); + + ret = lp5523_load_program(engine, pattern); + mutex_unlock(&chip->lock); + + if (ret) { + dev_err(&client->dev, "failed loading pattern\n"); + return ret; + } + + return len; +fail: + dev_err(&client->dev, "wrong pattern format\n"); + return -EINVAL; +} + +static ssize_t store_engine_load(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + return lp5523_do_store_load(&chip->engines[nr - 1], buf, len); +} + +#define store_load(nr) \ +static ssize_t store_engine##nr##_load(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_load(dev, attr, buf, len, nr); \ +} +store_load(1) +store_load(2) +store_load(3) + +static ssize_t show_engine_mode(struct device *dev, + struct device_attribute *attr, + char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + switch (chip->engines[nr - 1].mode) { + case LP5523_CMD_RUN: + return sprintf(buf, "run\n"); + case LP5523_CMD_LOAD: + return sprintf(buf, "load\n"); + case LP5523_CMD_DISABLED: + return sprintf(buf, "disabled\n"); + default: + return sprintf(buf, "disabled\n"); + } +} + +#define show_mode(nr) \ +static ssize_t show_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + return show_engine_mode(dev, attr, buf, nr); \ +} +show_mode(1) +show_mode(2) +show_mode(3) + +static ssize_t store_engine_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct lp5523_engine *engine = &chip->engines[nr - 1]; + mutex_lock(&chip->lock); + + if (!strncmp(buf, "run", 3)) + lp5523_set_mode(engine, LP5523_CMD_RUN); + else if (!strncmp(buf, "load", 4)) + lp5523_set_mode(engine, LP5523_CMD_LOAD); + else if (!strncmp(buf, "disabled", 8)) + lp5523_set_mode(engine, LP5523_CMD_DISABLED); + + mutex_unlock(&chip->lock); + return len; +} + +#define store_mode(nr) \ +static ssize_t store_engine##nr##_mode(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t len) \ +{ \ + return store_engine_mode(dev, attr, buf, len, nr); \ +} +store_mode(1) +store_mode(2) +store_mode(3) + +static ssize_t show_max_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->max_current); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + + return sprintf(buf, "%d\n", led->led_current); +} + +static ssize_t store_current(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct lp5523_led *led = cdev_to_led(led_cdev); + struct lp5523_chip *chip = led_to_lp5523(led); + ssize_t ret; + unsigned long curr; + + if (strict_strtoul(buf, 0, &curr)) + return -EINVAL; + + if (curr > led->max_current) + return -EINVAL; + + mutex_lock(&chip->lock); + ret = lp5523_write(chip->client, + LP5523_REG_LED_CURRENT_BASE + led->chan_nr, + (u8)curr); + mutex_unlock(&chip->lock); + + if (ret < 0) + return ret; + + led->led_current = (u8)curr; + + return len; +} + +/* led class device attributes */ +static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current); +static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL); + +static struct attribute *lp5523_led_attributes[] = { + &dev_attr_led_current.attr, + &dev_attr_max_current.attr, + NULL, +}; + +static struct attribute_group lp5523_led_attribute_group = { + .attrs = lp5523_led_attributes +}; + +/* device attributes */ +static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO, + show_engine1_mode, store_engine1_mode); +static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO, + show_engine2_mode, store_engine2_mode); +static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO, + show_engine3_mode, store_engine3_mode); +static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO, + show_engine1_leds, store_engine1_leds); +static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO, + show_engine2_leds, store_engine2_leds); +static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO, + show_engine3_leds, store_engine3_leds); +static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load); +static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load); +static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load); +static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL); + +static struct attribute *lp5523_attributes[] = { + &dev_attr_engine1_mode.attr, + &dev_attr_engine2_mode.attr, + &dev_attr_engine3_mode.attr, + &dev_attr_selftest.attr, + NULL +}; + +static struct attribute *lp5523_engine1_attributes[] = { + &dev_attr_engine1_load.attr, + &dev_attr_engine1_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine2_attributes[] = { + &dev_attr_engine2_load.attr, + &dev_attr_engine2_leds.attr, + NULL +}; + +static struct attribute *lp5523_engine3_attributes[] = { + &dev_attr_engine3_load.attr, + &dev_attr_engine3_leds.attr, + NULL +}; + +static const struct attribute_group lp5523_group = { + .attrs = lp5523_attributes, +}; + +static const struct attribute_group lp5523_engine_group[] = { + {.attrs = lp5523_engine1_attributes }, + {.attrs = lp5523_engine2_attributes }, + {.attrs = lp5523_engine3_attributes }, +}; + +static int lp5523_register_sysfs(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int ret; + + ret = sysfs_create_group(&dev->kobj, &lp5523_group); + if (ret < 0) + return ret; + + return 0; +} + +static void lp5523_unregister_sysfs(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + struct device *dev = &client->dev; + int i; + + sysfs_remove_group(&dev->kobj, &lp5523_group); + + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) + if (chip->engines[i].mode == LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]); + + for (i = 0; i < chip->num_leds; i++) + sysfs_remove_group(&chip->leds[i].cdev.dev->kobj, + &lp5523_led_attribute_group); +} + +/*--------------------------------------------------------------*/ +/* Set chip operating mode */ +/*--------------------------------------------------------------*/ +static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode) +{ + /* engine to chip */ + struct lp5523_chip *chip = engine_to_lp5523(engine); + struct i2c_client *client = chip->client; + struct device *dev = &client->dev; + int ret = 0; + + /* if in that mode already do nothing, except for run */ + if (mode == engine->mode && mode != LP5523_CMD_RUN) + return 0; + + if (mode == LP5523_CMD_RUN) { + ret = lp5523_run_program(engine); + } else if (mode == LP5523_CMD_LOAD) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + lp5523_set_engine_mode(engine, LP5523_CMD_LOAD); + + ret = sysfs_create_group(&dev->kobj, engine->attributes); + if (ret) + return ret; + } else if (mode == LP5523_CMD_DISABLED) { + lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED); + } + + /* remove load attribute from sysfs if not in load mode */ + if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD) + sysfs_remove_group(&dev->kobj, engine->attributes); + + engine->mode = mode; + + return ret; +} + +/*--------------------------------------------------------------*/ +/* Probe, Attach, Remove */ +/*--------------------------------------------------------------*/ +static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) +{ + if (id < 1 || id > LP5523_ENGINES) + return -1; + engine->id = id; + engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id); + engine->prog_page = id - 1; + engine->mux_page = id + 2; + engine->attributes = &lp5523_engine_group[id - 1]; + + return 0; +} + +static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, + int chan, struct lp5523_platform_data *pdata) +{ + char name[32]; + int res; + + if (chan >= LP5523_LEDS) + return -EINVAL; + + if (pdata->led_config[chan].led_current) { + led->led_current = pdata->led_config[chan].led_current; + led->max_current = pdata->led_config[chan].max_current; + led->chan_nr = pdata->led_config[chan].chan_nr; + + if (led->chan_nr >= LP5523_LEDS) { + dev_err(dev, "Use channel numbers between 0 and %d\n", + LP5523_LEDS - 1); + return -EINVAL; + } + + snprintf(name, 32, "lp5523:channel%d", chan); + + led->cdev.name = name; + led->cdev.brightness_set = lp5523_set_brightness; + res = led_classdev_register(dev, &led->cdev); + if (res < 0) { + dev_err(dev, "couldn't register led on channel %d\n", + chan); + return res; + } + res = sysfs_create_group(&led->cdev.dev->kobj, + &lp5523_led_attribute_group); + if (res < 0) { + dev_err(dev, "couldn't register current attribute\n"); + led_classdev_unregister(&led->cdev); + return res; + } + } else { + led->led_current = 0; + } + return 0; +} + +static struct i2c_driver lp5523_driver; + +static int lp5523_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp5523_chip *chip; + struct lp5523_platform_data *pdata; + int ret, i, led; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + pdata = client->dev.platform_data; + + if (!pdata) { + dev_err(&client->dev, "no platform data\n"); + ret = -EINVAL; + goto fail1; + } + + mutex_init(&chip->lock); + + chip->pdata = pdata; + + if (pdata->setup_resources) { + ret = pdata->setup_resources(); + if (ret < 0) + goto fail1; + } + + if (pdata->enable) { + pdata->enable(0); + usleep_range(1000, 2000); /* Keep enable down at least 1ms */ + pdata->enable(1); + usleep_range(1000, 2000); /* 500us abs min. */ + } + + lp5523_write(client, LP5523_REG_RESET, 0xff); + usleep_range(10000, 20000); /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ + ret = lp5523_detect(client); + if (ret) + goto fail2; + + dev_info(&client->dev, "LP5523 Programmable led chip found\n"); + + /* Initialize engines */ + for (i = 0; i < ARRAY_SIZE(chip->engines); i++) { + ret = lp5523_init_engine(&chip->engines[i], i + 1); + if (ret) { + dev_err(&client->dev, "error initializing engine\n"); + goto fail2; + } + } + ret = lp5523_configure(client); + if (ret < 0) { + dev_err(&client->dev, "error configuring chip\n"); + goto fail2; + } + + /* Initialize leds */ + chip->num_channels = pdata->num_channels; + chip->num_leds = 0; + led = 0; + for (i = 0; i < pdata->num_channels; i++) { + /* Do not initialize channels that are not connected */ + if (pdata->led_config[i].led_current == 0) + continue; + + ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata); + if (ret) { + dev_err(&client->dev, "error initializing leds\n"); + goto fail3; + } + chip->num_leds++; + + chip->leds[led].id = led; + /* Set LED current */ + lp5523_write(client, + LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr, + chip->leds[led].led_current); + + INIT_WORK(&(chip->leds[led].brightness_work), + lp5523_led_brightness_work); + + led++; + } + + ret = lp5523_register_sysfs(client); + if (ret) { + dev_err(&client->dev, "registering sysfs failed\n"); + goto fail3; + } + return ret; +fail3: + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } +fail2: + if (pdata->enable) + pdata->enable(0); + if (pdata->release_resources) + pdata->release_resources(); +fail1: + kfree(chip); + return ret; +} + +static int lp5523_remove(struct i2c_client *client) +{ + struct lp5523_chip *chip = i2c_get_clientdata(client); + int i; + + lp5523_unregister_sysfs(client); + + for (i = 0; i < chip->num_leds; i++) { + led_classdev_unregister(&chip->leds[i].cdev); + cancel_work_sync(&chip->leds[i].brightness_work); + } + + if (chip->pdata->enable) + chip->pdata->enable(0); + if (chip->pdata->release_resources) + chip->pdata->release_resources(); + kfree(chip); + return 0; +} + +static const struct i2c_device_id lp5523_id[] = { + { "lp5523", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, lp5523_id); + +static struct i2c_driver lp5523_driver = { + .driver = { + .name = "lp5523", + }, + .probe = lp5523_probe, + .remove = lp5523_remove, + .id_table = lp5523_id, +}; + +static int __init lp5523_init(void) +{ + int ret; + + ret = i2c_add_driver(&lp5523_driver); + + if (ret < 0) + printk(KERN_ALERT "Adding lp5523 driver failed\n"); + + return ret; +} + +static void __exit lp5523_exit(void) +{ + i2c_del_driver(&lp5523_driver); +} + +module_init(lp5523_init); +module_exit(lp5523_exit); + +MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>"); +MODULE_DESCRIPTION("LP5523 LED engine"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-net5501.c b/drivers/leds/leds-net5501.c index 3063f59..1739557 100644 --- a/drivers/leds/leds-net5501.c +++ b/drivers/leds/leds-net5501.c @@ -92,3 +92,5 @@ unmap: } arch_initcall(soekris_init); + +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index a688293..614ebeb 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -102,6 +102,7 @@ static struct dmi_system_id __initdata nas_led_whitelist[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") } }, + {} }; /* diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 82b77bd..b09bcbe 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -12,73 +12,25 @@ */ #include <linux/module.h> -#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/list.h> -#include <linux/spinlock.h> #include <linux/device.h> -#include <linux/sysdev.h> -#include <linux/timer.h> #include <linux/ctype.h> #include <linux/leds.h> -#include <linux/slab.h> #include "leds.h" -struct timer_trig_data { - int brightness_on; /* LED brightness during "on" period. - * (LED_OFF < brightness_on <= LED_FULL) - */ - unsigned long delay_on; /* milliseconds on */ - unsigned long delay_off; /* milliseconds off */ - struct timer_list timer; -}; - -static void led_timer_function(unsigned long data) -{ - struct led_classdev *led_cdev = (struct led_classdev *) data; - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long brightness; - unsigned long delay; - - if (!timer_data->delay_on || !timer_data->delay_off) { - led_set_brightness(led_cdev, LED_OFF); - return; - } - - brightness = led_get_brightness(led_cdev); - if (!brightness) { - /* Time to switch the LED on. */ - brightness = timer_data->brightness_on; - delay = timer_data->delay_on; - } else { - /* Store the current brightness value to be able - * to restore it when the delay_off period is over. - */ - timer_data->brightness_on = brightness; - brightness = LED_OFF; - delay = timer_data->delay_off; - } - - led_set_brightness(led_cdev, brightness); - - mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay)); -} - static ssize_t led_delay_on_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_on); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_on); } static ssize_t led_delay_on_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_on != state) { - /* the new value differs from the previous */ - timer_data->delay_on = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); ret = count; } @@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; - return sprintf(buf, "%lu\n", timer_data->delay_off); + return sprintf(buf, "%lu\n", led_cdev->blink_delay_off); } static ssize_t led_delay_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - struct timer_trig_data *timer_data = led_cdev->trigger_data; int ret = -EINVAL; char *after; unsigned long state = simple_strtoul(buf, &after, 10); @@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev, count++; if (count == size) { - if (timer_data->delay_off != state) { - /* the new value differs from the previous */ - timer_data->delay_off = state; - - /* deactivate previous settings */ - del_timer_sync(&timer_data->timer); - - /* try to activate hardware acceleration, if any */ - if (!led_cdev->blink_set || - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off)) { - /* no hardware acceleration, blink via timer */ - mod_timer(&timer_data->timer, jiffies + 1); - } - } + led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); ret = count; } @@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store); static void timer_trig_activate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data; int rc; - timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL); - if (!timer_data) - return; - - timer_data->brightness_on = led_get_brightness(led_cdev); - if (timer_data->brightness_on == LED_OFF) - timer_data->brightness_on = led_cdev->max_brightness; - led_cdev->trigger_data = timer_data; - - init_timer(&timer_data->timer); - timer_data->timer.function = led_timer_function; - timer_data->timer.data = (unsigned long) led_cdev; + led_cdev->trigger_data = NULL; rc = device_create_file(led_cdev->dev, &dev_attr_delay_on); if (rc) - goto err_out; + return; rc = device_create_file(led_cdev->dev, &dev_attr_delay_off); if (rc) goto err_out_delayon; - /* If there is hardware support for blinking, start one - * user friendly blink rate chosen by the driver. - */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, - &timer_data->delay_on, &timer_data->delay_off); + led_cdev->trigger_data = (void *)1; return; err_out_delayon: device_remove_file(led_cdev->dev, &dev_attr_delay_on); -err_out: - led_cdev->trigger_data = NULL; - kfree(timer_data); } static void timer_trig_deactivate(struct led_classdev *led_cdev) { - struct timer_trig_data *timer_data = led_cdev->trigger_data; - unsigned long on = 0, off = 0; - - if (timer_data) { + if (led_cdev->trigger_data) { device_remove_file(led_cdev->dev, &dev_attr_delay_on); device_remove_file(led_cdev->dev, &dev_attr_delay_off); - del_timer_sync(&timer_data->timer); - kfree(timer_data); } - /* If there is hardware support for blinking, stop it */ - if (led_cdev->blink_set) - led_cdev->blink_set(led_cdev, &on, &off); + /* Stop blinking */ + led_brightness_set(led_cdev, LED_OFF); } static struct led_trigger timer_led_trigger = { |
