1 files changed, 765 insertions, 0 deletions

diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
new file mode 100644
index 0000000..4149ecb
--- /dev/null
+++ b/drivers/leds/leds-bd2802.c
@@ -0,0 +1,765 @@
+/*
+ * leds-bd2802.c - RGB LED Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/leds-bd2802.h>
+
+
+#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
+
+#define BD2802_LED_OFFSET		0xa
+#define BD2802_COLOR_OFFSET		0x3
+
+#define BD2802_REG_CLKSETUP 		0x00
+#define BD2802_REG_CONTROL 		0x01
+#define BD2802_REG_HOURSETUP		0x02
+#define BD2802_REG_CURRENT1SETUP	0x03
+#define BD2802_REG_CURRENT2SETUP	0x04
+#define BD2802_REG_WAVEPATTERN		0x05
+
+#define BD2802_CURRENT_032		0x10 /* 3.2mA */
+#define BD2802_CURRENT_000		0x00 /* 0.0mA */
+
+#define BD2802_PATTERN_FULL		0x07
+#define BD2802_PATTERN_HALF		0x03
+
+enum led_ids {
+	LED1,
+	LED2,
+	LED_NUM,
+};
+
+enum led_colors {
+	RED,
+	GREEN,
+	BLUE,
+};
+
+enum led_bits {
+	BD2802_OFF,
+	BD2802_BLINK,
+	BD2802_ON,
+};
+
+/*
+ * State '0' : 'off'
+ * State '1' : 'blink'
+ * State '2' : 'on'.
+ */
+struct led_state {
+	unsigned r:2;
+	unsigned g:2;
+	unsigned b:2;
+};
+
+struct bd2802_led {
+	struct bd2802_led_platform_data	*pdata;
+	struct i2c_client		*client;
+	struct rw_semaphore		rwsem;
+	struct work_struct		work;
+
+	struct led_state		led[2];
+
+	/*
+	 * Making led_classdev as array is not recommended, because array
+	 * members prevent using 'container_of' macro. So repetitive works
+	 * are needed.
+	 */
+	struct led_classdev		cdev_led1r;
+	struct led_classdev		cdev_led1g;
+	struct led_classdev		cdev_led1b;
+	struct led_classdev		cdev_led2r;
+	struct led_classdev		cdev_led2g;
+	struct led_classdev		cdev_led2b;
+
+	/*
+	 * Advanced Configuration Function(ADF) mode:
+	 * In ADF mode, user can set registers of BD2802GU directly,
+	 * therefore BD2802GU doesn't enter reset state.
+	 */
+	int 				adf_on;
+
+	enum led_ids			led_id;
+	enum led_colors			color;
+	enum led_bits			state;
+};
+
+
+/*--------------------------------------------------------------*/
+/*	BD2802GU helper functions					*/
+/*--------------------------------------------------------------*/
+
+static inline int bd2802_is_rgb_off(struct bd2802_led *led, enum led_ids id,
+							enum led_colors color)
+{
+	switch (color) {
+	case RED:
+		return !led->led[id].r;
+	case GREEN:
+		return !led->led[id].g;
+	case BLUE:
+		return !led->led[id].b;
+	default:
+		dev_err(&led->client->dev, "%s: Invalid color\n", __func__);
+		return -EINVAL;
+	}
+}
+
+static inline int bd2802_is_led_off(struct bd2802_led *led, enum led_ids id)
+{
+	if (led->led[id].r || led->led[id].g || led->led[id].b)
+		return 0;
+
+	return 1;
+}
+
+static inline int bd2802_is_all_off(struct bd2802_led *led)
+{
+	int i;
+
+	for (i = 0; i < LED_NUM; i++)
+		if (!bd2802_is_led_off(led, i))
+			return 0;
+
+	return 1;
+}
+
+static inline u8 bd2802_get_base_offset(enum led_ids id, enum led_colors color)
+{
+	return id * BD2802_LED_OFFSET + color * BD2802_COLOR_OFFSET;
+}
+
+static inline u8 bd2802_get_reg_addr(enum led_ids id, enum led_colors color,
+								u8 reg_offset)
+{
+	return reg_offset + bd2802_get_base_offset(id, color);
+}
+
+
+/*--------------------------------------------------------------*/
+/*	BD2802GU core functions					*/
+/*--------------------------------------------------------------*/
+
+static int bd2802_write_byte(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret >= 0)
+		return 0;
+
+	dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+						__func__, reg, val, ret);
+
+	return ret;
+}
+
+static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
+				enum led_colors color, enum led_bits led_bit)
+{
+	int i;
+	u8 value;
+
+	for (i = 0; i < LED_NUM; i++) {
+		if (i == id) {
+			switch (color) {
+			case RED:
+				led->led[i].r = led_bit;
+				break;
+			case GREEN:
+				led->led[i].g = led_bit;
+				break;
+			case BLUE:
+				led->led[i].b = led_bit;
+				break;
+			default:
+				dev_err(&led->client->dev,
+					"%s: Invalid color\n", __func__);
+				return;
+			}
+		}
+	}
+
+	if (led_bit == BD2802_BLINK || led_bit == BD2802_ON)
+		return;
+
+	if (!bd2802_is_led_off(led, id))
+		return;
+
+	if (bd2802_is_all_off(led) && !led->adf_on) {
+		gpio_set_value(led->pdata->reset_gpio, 0);
+		return;
+	}
+
+	/*
+	 * In this case, other led is turned on, and current led is turned
+	 * off. So set RGB LED Control register to stop the current RGB LED
+	 */
+	value = (id == LED1) ? LED_CTL(1, 0) : LED_CTL(0, 1);
+	bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
+}
+
+static void bd2802_configure(struct bd2802_led *led)
+{
+	struct bd2802_led_platform_data *pdata = led->pdata;
+	u8 reg;
+
+	reg = bd2802_get_reg_addr(LED1, RED, BD2802_REG_HOURSETUP);
+	bd2802_write_byte(led->client, reg, pdata->rgb_time);
+
+	reg = bd2802_get_reg_addr(LED2, RED, BD2802_REG_HOURSETUP);
+	bd2802_write_byte(led->client, reg, pdata->rgb_time);
+}
+
+static void bd2802_reset_cancel(struct bd2802_led *led)
+{
+	gpio_set_value(led->pdata->reset_gpio, 1);
+	udelay(100);
+	bd2802_configure(led);
+}
+
+static void bd2802_enable(struct bd2802_led *led, enum led_ids id)
+{
+	enum led_ids other_led = (id == LED1) ? LED2 : LED1;
+	u8 value, other_led_on;
+
+	other_led_on = !bd2802_is_led_off(led, other_led);
+	if (id == LED1)
+		value = LED_CTL(other_led_on, 1);
+	else
+		value = LED_CTL(1 , other_led_on);
+
+	bd2802_write_byte(led->client, BD2802_REG_CONTROL, value);
+}
+
+static void bd2802_set_on(struct bd2802_led *led, enum led_ids id,
+							enum led_colors color)
+{
+	u8 reg;
+
+	if (bd2802_is_all_off(led) && !led->adf_on)
+		bd2802_reset_cancel(led);
+
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
+	bd2802_write_byte(led->client, reg, BD2802_PATTERN_FULL);
+
+	bd2802_enable(led, id);
+	bd2802_update_state(led, id, color, BD2802_ON);
+}
+
+static void bd2802_set_blink(struct bd2802_led *led, enum led_ids id,
+							enum led_colors color)
+{
+	u8 reg;
+
+	if (bd2802_is_all_off(led) && !led->adf_on)
+		bd2802_reset_cancel(led);
+
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_032);
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_WAVEPATTERN);
+	bd2802_write_byte(led->client, reg, BD2802_PATTERN_HALF);
+
+	bd2802_enable(led, id);
+	bd2802_update_state(led, id, color, BD2802_BLINK);
+}
+
+static void bd2802_turn_on(struct bd2802_led *led, enum led_ids id,
+				enum led_colors color, enum led_bits led_bit)
+{
+	if (led_bit == BD2802_OFF) {
+		dev_err(&led->client->dev,
+					"Only 'blink' and 'on' are allowed\n");
+		return;
+	}
+
+	if (led_bit == BD2802_BLINK)
+		bd2802_set_blink(led, id, color);
+	else
+		bd2802_set_on(led, id, color);
+}
+
+static void bd2802_turn_off(struct bd2802_led *led, enum led_ids id,
+							enum led_colors color)
+{
+	u8 reg;
+
+	if (bd2802_is_rgb_off(led, id, color))
+		return;
+
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT1SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+	reg = bd2802_get_reg_addr(id, color, BD2802_REG_CURRENT2SETUP);
+	bd2802_write_byte(led->client, reg, BD2802_CURRENT_000);
+
+	bd2802_update_state(led, id, color, BD2802_OFF);
+}
+
+static void bd2802_restore_state(struct bd2802_led *led)
+{
+	int i;
+
+	for (i = 0; i < LED_NUM; i++) {
+		if (led->led[i].r)
+			bd2802_turn_on(led, i, RED, led->led[i].r);
+		if (led->led[i].g)
+			bd2802_turn_on(led, i, GREEN, led->led[i].g);
+		if (led->led[i].b)
+			bd2802_turn_on(led, i, BLUE, led->led[i].b);
+	}
+}
+
+#define BD2802_SET_REGISTER(reg_addr, reg_name)				\
+static ssize_t bd2802_store_reg##reg_addr(struct device *dev,		\
+	struct device_attribute *attr, const char *buf, size_t count)	\
+{									\
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));\
+	unsigned long val;						\
+	int ret;							\
+	if (!count)							\
+		return -EINVAL;						\
+	ret = strict_strtoul(buf, 16, &val);				\
+	if (ret)							\
+		return ret;						\
+	down_write(&led->rwsem);					\
+	bd2802_write_byte(led->client, reg_addr, (u8) val);		\
+	up_write(&led->rwsem);						\
+	return count;							\
+}									\
+static struct device_attribute bd2802_reg##reg_addr##_attr = {		\
+	.attr = {.name = reg_name, .mode = 0644, .owner = THIS_MODULE},	\
+	.store = bd2802_store_reg##reg_addr,				\
+};
+
+BD2802_SET_REGISTER(0x00, "0x00");
+BD2802_SET_REGISTER(0x01, "0x01");
+BD2802_SET_REGISTER(0x02, "0x02");
+BD2802_SET_REGISTER(0x03, "0x03");
+BD2802_SET_REGISTER(0x04, "0x04");
+BD2802_SET_REGISTER(0x05, "0x05");
+BD2802_SET_REGISTER(0x06, "0x06");
+BD2802_SET_REGISTER(0x07, "0x07");
+BD2802_SET_REGISTER(0x08, "0x08");
+BD2802_SET_REGISTER(0x09, "0x09");
+BD2802_SET_REGISTER(0x0a, "0x0a");
+BD2802_SET_REGISTER(0x0b, "0x0b");
+BD2802_SET_REGISTER(0x0c, "0x0c");
+BD2802_SET_REGISTER(0x0d, "0x0d");
+BD2802_SET_REGISTER(0x0e, "0x0e");
+BD2802_SET_REGISTER(0x0f, "0x0f");
+BD2802_SET_REGISTER(0x10, "0x10");
+BD2802_SET_REGISTER(0x11, "0x11");
+BD2802_SET_REGISTER(0x12, "0x12");
+BD2802_SET_REGISTER(0x13, "0x13");
+BD2802_SET_REGISTER(0x14, "0x14");
+BD2802_SET_REGISTER(0x15, "0x15");
+
+static struct device_attribute *bd2802_addr_attributes[] = {
+	&bd2802_reg0x00_attr,
+	&bd2802_reg0x01_attr,
+	&bd2802_reg0x02_attr,
+	&bd2802_reg0x03_attr,
+	&bd2802_reg0x04_attr,
+	&bd2802_reg0x05_attr,
+	&bd2802_reg0x06_attr,
+	&bd2802_reg0x07_attr,
+	&bd2802_reg0x08_attr,
+	&bd2802_reg0x09_attr,
+	&bd2802_reg0x0a_attr,
+	&bd2802_reg0x0b_attr,
+	&bd2802_reg0x0c_attr,
+	&bd2802_reg0x0d_attr,
+	&bd2802_reg0x0e_attr,
+	&bd2802_reg0x0f_attr,
+	&bd2802_reg0x10_attr,
+	&bd2802_reg0x11_attr,
+	&bd2802_reg0x12_attr,
+	&bd2802_reg0x13_attr,
+	&bd2802_reg0x14_attr,
+	&bd2802_reg0x15_attr,
+};
+
+static void bd2802_enable_adv_conf(struct bd2802_led *led)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++) {
+		ret = device_create_file(&led->client->dev,
+						bd2802_addr_attributes[i]);
+		if (ret) {
+			dev_err(&led->client->dev, "failed to sysfs file %s\n",
+					bd2802_addr_attributes[i]->attr.name);
+			goto failed_remove_files;
+		}
+	}
+
+	if (bd2802_is_all_off(led))
+		bd2802_reset_cancel(led);
+
+	led->adf_on = 1;
+
+	return;
+
+failed_remove_files:
+	for (i--; i >= 0; i--)
+		device_remove_file(&led->client->dev,
+						bd2802_addr_attributes[i]);
+}
+
+static void bd2802_disable_adv_conf(struct bd2802_led *led)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bd2802_addr_attributes); i++)
+		device_remove_file(&led->client->dev,
+						bd2802_addr_attributes[i]);
+
+	if (bd2802_is_all_off(led))
+		gpio_set_value(led->pdata->reset_gpio, 0);
+
+	led->adf_on = 0;
+}
+
+static ssize_t bd2802_show_adv_conf(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	ssize_t ret;
+
+	down_read(&led->rwsem);
+	if (led->adf_on)
+		ret = sprintf(buf, "on\n");
+	else
+		ret = sprintf(buf, "off\n");
+	up_read(&led->rwsem);
+
+	return ret;
+}
+
+static ssize_t bd2802_store_adv_conf(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct bd2802_led *led = i2c_get_clientdata(to_i2c_client(dev));
+
+	if (!count)
+		return -EINVAL;
+
+	down_write(&led->rwsem);
+	if (!led->adf_on && !strncmp(buf, "on", 2))
+		bd2802_enable_adv_conf(led);
+	else if (led->adf_on && !strncmp(buf, "off", 3))
+		bd2802_disable_adv_conf(led);
+	up_write(&led->rwsem);
+
+	return count;
+}
+
+static struct device_attribute bd2802_adv_conf_attr = {
+	.attr = {
+		.name = "advanced_configuration",
+		.mode = 0644,
+		.owner = THIS_MODULE
+	},
+	.show = bd2802_show_adv_conf,
+	.store = bd2802_store_adv_conf,
+};
+
+static void bd2802_led_work(struct work_struct *work)
+{
+	struct bd2802_led *led = container_of(work, struct bd2802_led, work);
+
+	if (led->state)
+		bd2802_turn_on(led, led->led_id, led->color, led->state);
+	else
+		bd2802_turn_off(led, led->led_id, led->color);
+}
+
+#define BD2802_CONTROL_RGBS(name, id, clr)				\
+static void bd2802_set_##name##_brightness(struct led_classdev *led_cdev,\
+					enum led_brightness value)	\
+{									\
+	struct bd2802_led *led =					\
+		container_of(led_cdev, struct bd2802_led, cdev_##name);	\
+	led->led_id = id;						\
+	led->color = clr;						\
+	if (value == LED_OFF)						\
+		led->state = BD2802_OFF;				\
+	else								\
+		led->state = BD2802_ON;					\
+	schedule_work(&led->work);					\
+}									\
+static int bd2802_set_##name##_blink(struct led_classdev *led_cdev,	\
+		unsigned long *delay_on, unsigned long *delay_off)	\
+{									\
+	struct bd2802_led *led =					\
+		container_of(led_cdev, struct bd2802_led, cdev_##name);	\
+	if (*delay_on == 0 || *delay_off == 0)				\
+		return -EINVAL;						\
+	led->led_id = id;						\
+	led->color = clr;						\
+	led->state = BD2802_BLINK;					\
+	schedule_work(&led->work);					\
+	return 0;							\
+}
+
+BD2802_CONTROL_RGBS(led1r, LED1, RED);
+BD2802_CONTROL_RGBS(led1g, LED1, GREEN);
+BD2802_CONTROL_RGBS(led1b, LED1, BLUE);
+BD2802_CONTROL_RGBS(led2r, LED2, RED);
+BD2802_CONTROL_RGBS(led2g, LED2, GREEN);
+BD2802_CONTROL_RGBS(led2b, LED2, BLUE);
+
+static int bd2802_register_led_classdev(struct bd2802_led *led)
+{
+	int ret;
+
+	INIT_WORK(&led->work, bd2802_led_work);
+
+	led->cdev_led1r.name = "led1_R";
+	led->cdev_led1r.brightness = LED_OFF;
+	led->cdev_led1r.brightness_set = bd2802_set_led1r_brightness;
+	led->cdev_led1r.blink_set = bd2802_set_led1r_blink;
+	led->cdev_led1r.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led1r);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led1r.name);
+		goto failed_unregister_led1_R;
+	}
+
+	led->cdev_led1g.name = "led1_G";
+	led->cdev_led1g.brightness = LED_OFF;
+	led->cdev_led1g.brightness_set = bd2802_set_led1g_brightness;
+	led->cdev_led1g.blink_set = bd2802_set_led1g_blink;
+	led->cdev_led1g.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led1g);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led1g.name);
+		goto failed_unregister_led1_G;
+	}
+
+	led->cdev_led1b.name = "led1_B";
+	led->cdev_led1b.brightness = LED_OFF;
+	led->cdev_led1b.brightness_set = bd2802_set_led1b_brightness;
+	led->cdev_led1b.blink_set = bd2802_set_led1b_blink;
+	led->cdev_led1b.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led1b);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led1b.name);
+		goto failed_unregister_led1_B;
+	}
+
+	led->cdev_led2r.name = "led2_R";
+	led->cdev_led2r.brightness = LED_OFF;
+	led->cdev_led2r.brightness_set = bd2802_set_led2r_brightness;
+	led->cdev_led2r.blink_set = bd2802_set_led2r_blink;
+	led->cdev_led2r.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led2r);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led2r.name);
+		goto failed_unregister_led2_R;
+	}
+
+	led->cdev_led2g.name = "led2_G";
+	led->cdev_led2g.brightness = LED_OFF;
+	led->cdev_led2g.brightness_set = bd2802_set_led2g_brightness;
+	led->cdev_led2g.blink_set = bd2802_set_led2g_blink;
+	led->cdev_led2g.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led2g);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led2g.name);
+		goto failed_unregister_led2_G;
+	}
+
+	led->cdev_led2b.name = "led2_B";
+	led->cdev_led2b.brightness = LED_OFF;
+	led->cdev_led2b.brightness_set = bd2802_set_led2b_brightness;
+	led->cdev_led2b.blink_set = bd2802_set_led2b_blink;
+	led->cdev_led2b.flags |= LED_CORE_SUSPENDRESUME;
+
+	ret = led_classdev_register(&led->client->dev, &led->cdev_led2b);
+	if (ret < 0) {
+		dev_err(&led->client->dev, "couldn't register LED %s\n",
+							led->cdev_led2b.name);
+		goto failed_unregister_led2_B;
+	}
+
+	return 0;
+
+failed_unregister_led2_B:
+	led_classdev_unregister(&led->cdev_led2g);
+failed_unregister_led2_G:
+	led_classdev_unregister(&led->cdev_led2r);
+failed_unregister_led2_R:
+	led_classdev_unregister(&led->cdev_led1b);
+failed_unregister_led1_B:
+	led_classdev_unregister(&led->cdev_led1g);
+failed_unregister_led1_G:
+	led_classdev_unregister(&led->cdev_led1r);
+failed_unregister_led1_R:
+
+	return ret;
+}
+
+static void bd2802_unregister_led_classdev(struct bd2802_led *led)
+{
+	cancel_work_sync(&led->work);
+	led_classdev_unregister(&led->cdev_led1r);
+}
+
+static int __devinit bd2802_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct bd2802_led *led;
+	struct bd2802_led_platform_data *pdata;
+	int ret;
+
+	led = kzalloc(sizeof(struct bd2802_led), GFP_KERNEL);
+	if (!led) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	led->client = client;
+	pdata = led->pdata = client->dev.platform_data;
+	i2c_set_clientdata(client, led);
+
+	/* Configure RESET GPIO (L: RESET, H: RESET cancel) */
+	gpio_request(pdata->reset_gpio, "RGB_RESETB");
+	gpio_direction_output(pdata->reset_gpio, 1);
+
+	/* Tacss = min 0.1ms */
+	udelay(100);
+
+	/* Detect BD2802GU */
+	ret = bd2802_write_byte(client, BD2802_REG_CLKSETUP, 0x00);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to detect device\n");
+		goto failed_free;
+	} else
+		dev_info(&client->dev, "return 0x%02x\n", ret);
+
+	/* To save the power, reset BD2802 after detecting */
+	gpio_set_value(led->pdata->reset_gpio, 0);
+
+	init_rwsem(&led->rwsem);
+
+	ret = device_create_file(&client->dev, &bd2802_adv_conf_attr);
+	if (ret) {
+		dev_err(&client->dev, "failed to create sysfs file %s\n",
+					bd2802_adv_conf_attr.attr.name);
+		goto failed_free;
+	}
+
+	ret = bd2802_register_led_classdev(led);
+	if (ret < 0)
+		goto failed_unregister_dev_file;
+
+	return 0;
+
+failed_unregister_dev_file:
+	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+failed_free:
+	i2c_set_clientdata(client, NULL);
+	kfree(led);
+
+	return ret;
+}
+
+static int __exit bd2802_remove(struct i2c_client *client)
+{
+	struct bd2802_led *led = i2c_get_clientdata(client);
+
+	bd2802_unregister_led_classdev(led);
+	gpio_set_value(led->pdata->reset_gpio, 0);
+	if (led->adf_on)
+		bd2802_disable_adv_conf(led);
+	device_remove_file(&client->dev, &bd2802_adv_conf_attr);
+	i2c_set_clientdata(client, NULL);
+	kfree(led);
+
+	return 0;
+}
+
+static int bd2802_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct bd2802_led *led = i2c_get_clientdata(client);
+
+	gpio_set_value(led->pdata->reset_gpio, 0);
+
+	return 0;
+}
+
+static int bd2802_resume(struct i2c_client *client)
+{
+	struct bd2802_led *led = i2c_get_clientdata(client);
+
+	if (!bd2802_is_all_off(led) || led->adf_on) {
+		gpio_set_value(led->pdata->reset_gpio, 1);
+		udelay(100);
+		bd2802_restore_state(led);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bd2802_id[] = {
+	{ "BD2802", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bd2802_id);
+
+static struct i2c_driver bd2802_i2c_driver = {
+	.driver	= {
+		.name	= "BD2802",
+	},
+	.probe		= bd2802_probe,
+	.remove		= __exit_p(bd2802_remove),
+	.suspend	= bd2802_suspend,
+	.resume		= bd2802_resume,
+	.id_table	= bd2802_id,
+};
+
+static int __init bd2802_init(void)
+{
+	return i2c_add_driver(&bd2802_i2c_driver);
+}
+module_init(bd2802_init);
+
+static void __exit bd2802_exit(void)
+{
+	i2c_del_driver(&bd2802_i2c_driver);
+}
+module_exit(bd2802_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("BD2802 LED driver");
+MODULE_LICENSE("GPL");