1 files changed, 108 insertions, 0 deletions
diff --git a/drivers/isdn/i4l/isdn_concap.c b/drivers/isdn/i4l/isdn_concap.c
new file mode 100644
index 0000000..83a4f538
--- /dev/null
+++ b/drivers/isdn/i4l/isdn_concap.c
@@ -0,0 +1,108 @@
+/* $Id: isdn_concap.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $
+ * 
+ * Linux ISDN subsystem, protocol encapsulation
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+/* Stuff to support the concap_proto by isdn4linux. isdn4linux - specific
+ * stuff goes here. Stuff that depends only on the concap protocol goes to
+ * another -- protocol specific -- source file.
+ *
+ */
+
+
+#include <linux/isdn.h>
+#include "isdn_x25iface.h"
+#include "isdn_net.h"
+#include <linux/concap.h>
+#include "isdn_concap.h"
+
+
+/* The following set of device service operations are for encapsulation
+   protocols that require for reliable datalink semantics. That means:
+
+   - before any data is to be submitted the connection must explicitly
+     be set up.
+   - after the successful set up of the connection is signalled the
+     connection is considered to be reliably up.
+
+   Auto-dialing ist not compatible with this requirements. Thus, auto-dialing 
+   is completely bypassed.
+
+   It might be possible to implement a (non standardized) datalink protocol
+   that provides a reliable data link service while using some auto dialing
+   mechanism. Such a protocol would need an auxiliary channel (i.e. user-user-
+   signaling on the D-channel) while the B-channel is down.
+   */
+
+
+int isdn_concap_dl_data_req(struct concap_proto *concap, struct sk_buff *skb)
+{
+	struct net_device *ndev = concap -> net_dev;
+	isdn_net_dev *nd = ((isdn_net_local *) ndev->priv)->netdev;
+	isdn_net_local *lp = isdn_net_get_locked_lp(nd);
+
+	IX25DEBUG( "isdn_concap_dl_data_req: %s \n", concap->net_dev->name);
+	if (!lp) {
+		IX25DEBUG( "isdn_concap_dl_data_req: %s : isdn_net_send_skb returned %d\n", concap -> net_dev -> name, 1);
+		return 1;
+	}
+	lp->huptimer = 0;
+	isdn_net_writebuf_skb(lp, skb);
+	spin_unlock_bh(&lp->xmit_lock);
+	IX25DEBUG( "isdn_concap_dl_data_req: %s : isdn_net_send_skb returned %d\n", concap -> net_dev -> name, 0);
+	return 0;
+}
+
+
+int isdn_concap_dl_connect_req(struct concap_proto *concap)
+{
+	struct net_device *ndev = concap -> net_dev;
+	isdn_net_local *lp = (isdn_net_local *) ndev->priv;
+	int ret;
+	IX25DEBUG( "isdn_concap_dl_connect_req: %s \n", ndev -> name);
+
+	/* dial ... */
+	ret = isdn_net_dial_req( lp );
+	if ( ret ) IX25DEBUG("dialing failed\n");
+	return ret;
+}
+
+int isdn_concap_dl_disconn_req(struct concap_proto *concap)
+{
+	IX25DEBUG( "isdn_concap_dl_disconn_req: %s \n", concap -> net_dev -> name);
+
+	isdn_net_hangup( concap -> net_dev );
+	return 0;
+}
+
+struct concap_device_ops isdn_concap_reliable_dl_dops = {
+	&isdn_concap_dl_data_req,
+	&isdn_concap_dl_connect_req,
+	&isdn_concap_dl_disconn_req
+};
+
+struct concap_device_ops isdn_concap_demand_dial_dops = {
+	NULL, /* set this first entry to something like &isdn_net_start_xmit,
+		 but the entry part of the current isdn_net_start_xmit must be
+		 separated first. */
+	/* no connection control for demand dial semantics */
+	NULL,
+	NULL,
+};
+
+/* The following should better go into a dedicated source file such that
+   this sourcefile does not need to include any protocol specific header
+   files. For now:
+   */
+struct concap_proto * isdn_concap_new( int encap )
+{
+	switch ( encap ) {
+	case ISDN_NET_ENCAP_X25IFACE:
+		return isdn_x25iface_proto_new();
+	}
+	return NULL;
+}