summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/hardware/mISDN/hfcmulti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfcmulti.c')
-rw-r--r--drivers/isdn/hardware/mISDN/hfcmulti.c206
1 files changed, 101 insertions, 105 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index c63e2f4..97f4708 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -133,6 +133,12 @@
* Give the value of the clock control register (A_ST_CLK_DLY)
* of the S/T interfaces in TE mode.
* This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clock:
+ * NOTE: only one clock value must be given once
+ * Selects interface with clock source for mISDN and applications.
+ * Set to card number starting with 1. Set to -1 to disable.
+ * By default, the first card is used as clock source.
*/
/*
@@ -140,7 +146,7 @@
* #define HFC_REGISTER_DEBUG
*/
-static const char *hfcmulti_revision = "2.02";
+#define HFC_MULTI_VERSION "2.03"
#include <linux/module.h>
#include <linux/pci.h>
@@ -165,10 +171,6 @@ static LIST_HEAD(HFClist);
static spinlock_t HFClock; /* global hfc list lock */
static void ph_state_change(struct dchannel *);
-static void (*hfc_interrupt)(void);
-static void (*register_interrupt)(void);
-static int (*unregister_interrupt)(void);
-static int interrupt_registered;
static struct hfc_multi *syncmaster;
static int plxsd_master; /* if we have a master card (yet) */
@@ -184,7 +186,6 @@ static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 };
#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
#define CLKDEL_NT 0x6c /* CLKDEL in NT mode
(0x60 MUST be included!) */
-static u_char silence = 0xff; /* silence by LAW */
#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */
#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */
@@ -195,12 +196,13 @@ static u_char silence = 0xff; /* silence by LAW */
*/
static uint type[MAX_CARDS];
-static uint pcm[MAX_CARDS];
-static uint dslot[MAX_CARDS];
+static int pcm[MAX_CARDS];
+static int dslot[MAX_CARDS];
static uint iomode[MAX_CARDS];
static uint port[MAX_PORTS];
static uint debug;
static uint poll;
+static int clock;
static uint timer;
static uint clockdelay_te = CLKDEL_TE;
static uint clockdelay_nt = CLKDEL_NT;
@@ -209,14 +211,16 @@ static int HFC_cnt, Port_cnt, PCM_cnt = 99;
MODULE_AUTHOR("Andreas Eversberg");
MODULE_LICENSE("GPL");
+MODULE_VERSION(HFC_MULTI_VERSION);
module_param(debug, uint, S_IRUGO | S_IWUSR);
module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(clock, int, S_IRUGO | S_IWUSR);
module_param(timer, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
@@ -1419,19 +1423,6 @@ controller_fail:
HFC_outb(hc, R_TI_WD, poll_timer);
hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
- /*
- * set up 125us interrupt, only if function pointer is available
- * and module parameter timer is set
- */
- if (timer && hfc_interrupt && register_interrupt) {
- /* only one chip should use this interrupt */
- timer = 0;
- interrupt_registered = 1;
- hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
- /* deactivate other interrupts in ztdummy */
- register_interrupt();
- }
-
/* set E1 state machine IRQ */
if (hc->type == 1)
hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
@@ -1991,6 +1982,17 @@ next_frame:
return; /* no data */
}
+ /* "fill fifo if empty" feature */
+ if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags)
+ && !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) {
+ if (debug & DEBUG_HFCMULTI_FILL)
+ printk(KERN_DEBUG "%s: buffer empty, so we have "
+ "underrun\n", __func__);
+ /* fill buffer, to prevent future underrun */
+ hc->write_fifo(hc, hc->silence_data, poll >> 1);
+ Zspace -= (poll >> 1);
+ }
+
/* if audio data and connected slot */
if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
&& slot_tx >= 0) {
@@ -2027,7 +2029,6 @@ next_frame:
__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
temp ? "HDLC":"TRANS");
-
/* Have to prep the audio data */
hc->write_fifo(hc, d, ii - i);
*idxp = ii;
@@ -2066,7 +2067,7 @@ next_frame:
* no more data at all. this prevents sending an undefined value.
*/
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
}
@@ -2583,7 +2584,6 @@ hfcmulti_interrupt(int intno, void *dev_id)
static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
iq5 = 0, iq6 = 0, iqcnt = 0;
#endif
- static int count;
struct hfc_multi *hc = dev_id;
struct dchannel *dch;
u_char r_irq_statech, status, r_irq_misc, r_irq_oview;
@@ -2637,6 +2637,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
iqcnt = 0;
}
#endif
+
if (!r_irq_statech &&
!(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
V_MISC_IRQSTA | V_FR_IRQSTA))) {
@@ -2657,6 +2658,7 @@ hfcmulti_interrupt(int intno, void *dev_id)
if (status & V_MISC_IRQSTA) {
/* misc IRQ */
r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+ r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
if (r_irq_misc & V_STA_IRQ) {
if (hc->type == 1) {
/* state machine */
@@ -2691,23 +2693,20 @@ hfcmulti_interrupt(int intno, void *dev_id)
plxsd_checksync(hc, 0);
}
}
- if (r_irq_misc & V_TI_IRQ)
+ if (r_irq_misc & V_TI_IRQ) {
+ if (hc->iclock_on)
+ mISDN_clock_update(hc->iclock, poll, NULL);
handle_timer_irq(hc);
+ }
if (r_irq_misc & V_DTMF_IRQ) {
- /* -> DTMF IRQ */
hfcmulti_dtmf(hc);
}
- /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */
if (r_irq_misc & V_IRQ_PROC) {
- /* IRQ every 125us */
- count++;
- /* generate 1kHz signal */
- if (count == 8) {
- if (hfc_interrupt)
- hfc_interrupt();
- count = 0;
- }
+ static int irq_proc_cnt;
+ if (!irq_proc_cnt++)
+ printk(KERN_WARNING "%s: got V_IRQ_PROC -"
+ " this should not happen\n", __func__);
}
}
@@ -2954,7 +2953,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
((ch % 4) * 4)) << 1);
HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
@@ -2969,7 +2968,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx,
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
/* enable RX fifo */
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
@@ -3461,7 +3460,7 @@ channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
switch (cq->op) {
case MISDN_CTRL_GETOP:
cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
- | MISDN_CTRL_RX_OFF;
+ | MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY;
break;
case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
hc->chan[bch->slot].rx_off = !!cq->p1;
@@ -3476,6 +3475,12 @@ channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq)
printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
__func__, bch->nr, hc->chan[bch->slot].rx_off);
break;
+ case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */
+ test_and_set_bit(FLG_FILLEMPTY, &bch->Flags);
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d "
+ "off=%d)\n", __func__, bch->nr, !!cq->p1);
+ break;
case MISDN_CTRL_HW_FEATURES: /* fill features structure */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HW_FEATURE request\n",
@@ -3992,6 +3997,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch,
}
if (test_and_set_bit(FLG_OPEN, &bch->Flags))
return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
bch->ch.protocol = rq->protocol;
hc->chan[ch].rx_off = 0;
rq->ch = &bch->ch;
@@ -4081,6 +4087,15 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
return err;
}
+static int
+clockctl(void *priv, int enable)
+{
+ struct hfc_multi *hc = priv;
+
+ hc->iclock_on = enable;
+ return 0;
+}
+
/*
* initialize the card
*/
@@ -4495,10 +4510,14 @@ release_card(struct hfc_multi *hc)
printk(KERN_WARNING "%s: release card (%d) entered\n",
__func__, hc->id);
+ /* unregister clock source */
+ if (hc->iclock)
+ mISDN_unregister_clock(hc->iclock);
+
+ /* disable irq */
spin_lock_irqsave(&hc->lock, flags);
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
-
udelay(1000);
/* dimm leds */
@@ -4699,7 +4718,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m)
} else
hc->chan[hc->dslot].jitter = 2; /* default */
snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
- ret = mISDN_register_device(&dch->dev, name);
+ ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
if (ret)
goto free_chan;
hc->created[0] = 1;
@@ -4807,9 +4826,9 @@ init_multi_port(struct hfc_multi *hc, int pt)
test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
&hc->chan[i + 2].cfg);
}
- snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
+ snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
hc->type, HFC_cnt + 1, pt + 1);
- ret = mISDN_register_device(&dch->dev, name);
+ ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
if (ret)
goto free_chan;
hc->created[pt] = 1;
@@ -4828,6 +4847,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
struct hfc_multi *hc;
u_long flags;
u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+ int i;
if (HFC_cnt >= MAX_CARDS) {
printk(KERN_ERR "too many cards (max=%d).\n",
@@ -4861,11 +4881,11 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
hc->id = HFC_cnt;
hc->pcm = pcm[HFC_cnt];
hc->io_mode = iomode[HFC_cnt];
- if (dslot[HFC_cnt] < 0) {
+ if (dslot[HFC_cnt] < 0 && hc->type == 1) {
hc->dslot = 0;
printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
"31 B-channels\n");
- } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+ } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 && hc->type == 1) {
hc->dslot = dslot[HFC_cnt];
printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
"time slot %d\n", dslot[HFC_cnt]);
@@ -4876,9 +4896,17 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
hc->masterclk = -1;
if (type[HFC_cnt] & 0x100) {
test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
- silence = 0xff; /* ulaw silence */
+ hc->silence = 0xff; /* ulaw silence */
} else
- silence = 0x2a; /* alaw silence */
+ hc->silence = 0x2a; /* alaw silence */
+ if ((poll >> 1) > sizeof(hc->silence_data)) {
+ printk(KERN_ERR "HFCMULTI error: silence_data too small, "
+ "please fix\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < (poll >> 1); i++)
+ hc->silence_data[i] = hc->silence;
+
if (!(type[HFC_cnt] & 0x200))
test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
@@ -4945,9 +4973,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
switch (m->dip_type) {
case DIP_4S:
/*
- * get DIP Setting for beroNet 1S/2S/4S cards
- * check if Port Jumper config matches
- * module param 'protocol'
+ * Get DIP setting for beroNet 1S/2S/4S cards
* DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
* GPI 19/23 (R_GPI_IN2))
*/
@@ -4966,9 +4992,8 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
case DIP_8S:
/*
- * get DIP Setting for beroNet 8S0+ cards
- *
- * enable PCI auxbridge function
+ * Get DIP Setting for beroNet 8S0+ cards
+ * Enable PCI auxbridge function
*/
HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
/* prepare access to auxport */
@@ -5003,6 +5028,10 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
list_add_tail(&hc->list, &HFClist);
spin_unlock_irqrestore(&HFClock, flags);
+ /* use as clock source */
+ if (clock == HFC_cnt + 1)
+ hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
+
/* initialize hardware */
ret_err = init_card(hc);
if (ret_err) {
@@ -5137,8 +5166,7 @@ static struct pci_device_id hfmultipci_ids[] __devinitdata = {
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
- /* IOB8ST Recording */
+ PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
@@ -5188,18 +5216,16 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct hm_map *m = (struct hm_map *)ent->driver_data;
int ret;
- if (m == NULL) {
- if (ent->vendor == PCI_VENDOR_ID_CCD)
- if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
- ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
- ent->device == PCI_DEVICE_ID_CCD_HFCE1)
- printk(KERN_ERR
- "unknown HFC multiport controller "
- "(vendor:%x device:%x subvendor:%x "
- "subdevice:%x) Please contact the "
- "driver maintainer for support.\n",
- ent->vendor, ent->device,
- ent->subvendor, ent->subdevice);
+ if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && (
+ ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+ ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+ ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
+ printk(KERN_ERR
+ "Unknown HFC multiport controller (vendor:%x device:%x "
+ "subvendor:%x subdevice:%x)\n", ent->vendor, ent->device,
+ ent->subvendor, ent->subdevice);
+ printk(KERN_ERR
+ "Please contact the driver maintainer for support.\n");
return -ENODEV;
}
ret = hfcmulti_init(pdev, ent);
@@ -5222,22 +5248,9 @@ HFCmulti_cleanup(void)
{
struct hfc_multi *card, *next;
- /* unload interrupt function symbol */
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
-
+ /* get rid of all devices of this driver */
list_for_each_entry_safe(card, next, &HFClist, list)
release_card(card);
- /* get rid of all devices of this driver */
pci_unregister_driver(&hfcmultipci_driver);
}
@@ -5246,8 +5259,10 @@ HFCmulti_init(void)
{
int err;
+ printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
+
#ifdef IRQ_DEBUG
- printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+ printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
#endif
spin_lock_init(&HFClock);
@@ -5256,22 +5271,11 @@ HFCmulti_init(void)
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: init entered\n", __func__);
- hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
- register_interrupt = symbol_get(ztdummy_register_interrupt);
- unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
- printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
- hfcmulti_revision);
-
switch (poll) {
case 0:
poll_timer = 6;
poll = 128;
break;
- /*
- * wenn dieses break nochmal verschwindet,
- * gibt es heisse ohren :-)
- * "without the break you will get hot ears ???"
- */
case 8:
poll_timer = 2;
break;
@@ -5298,20 +5302,12 @@ HFCmulti_init(void)
}
+ if (!clock)
+ clock = 1;
+
err = pci_register_driver(&hfcmultipci_driver);
if (err < 0) {
printk(KERN_ERR "error registering pci driver: %x\n", err);
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
return err;
}
return 0;
OpenPOWER on IntegriCloud