summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/gigaset/gigaset.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/gigaset/gigaset.h')
-rw-r--r--drivers/isdn/gigaset/gigaset.h176
1 files changed, 67 insertions, 109 deletions
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index a2f6125..e963a6c 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -23,7 +23,6 @@
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/spinlock.h>
-#include <linux/isdnif.h>
#include <linux/usb.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
@@ -35,12 +34,11 @@
#include <linux/list.h>
#include <asm/atomic.h>
-#define GIG_VERSION {0,5,0,0}
-#define GIG_COMPAT {0,4,0,0}
+#define GIG_VERSION {0, 5, 0, 0}
+#define GIG_COMPAT {0, 4, 0, 0}
#define MAX_REC_PARAMS 10 /* Max. number of params in response string */
#define MAX_RESP_SIZE 512 /* Max. size of a response string */
-#define HW_HDR_LEN 2 /* Header size used to store ack info */
#define MAX_EVENTS 64 /* size of event queue */
@@ -135,35 +133,32 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
#define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
-/* int-in-events 3070 */
+/* interrupt pipe messages */
#define HD_B1_FLOW_CONTROL 0x80
#define HD_B2_FLOW_CONTROL 0x81
-#define HD_RECEIVEATDATA_ACK (0x35) // 3070
- // att: HD_RECEIVE>>AT<<DATA_ACK
-#define HD_READY_SEND_ATDATA (0x36) // 3070
-#define HD_OPEN_ATCHANNEL_ACK (0x37) // 3070
-#define HD_CLOSE_ATCHANNEL_ACK (0x38) // 3070
-#define HD_DEVICE_INIT_OK (0x11) // ISurf USB + 3070
-#define HD_OPEN_B1CHANNEL_ACK (0x51) // ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL_ACK (0x52) // ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL_ACK (0x53) // ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL_ACK (0x54) // ISurf USB + 3070
-// Powermangment
-#define HD_SUSPEND_END (0x61) // ISurf USB
-// Configuration
-#define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) // ISurf USB + 3070
-
-/* control requests 3070 */
-#define HD_OPEN_B1CHANNEL (0x23) // ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL (0x24) // ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL (0x25) // ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL (0x26) // ISurf USB + 3070
-#define HD_RESET_INTERRUPT_PIPE (0x27) // ISurf USB + 3070
-#define HD_DEVICE_INIT_ACK (0x34) // ISurf USB + 3070
-#define HD_WRITE_ATMESSAGE (0x12) // 3070
-#define HD_READ_ATMESSAGE (0x13) // 3070
-#define HD_OPEN_ATCHANNEL (0x28) // 3070
-#define HD_CLOSE_ATCHANNEL (0x29) // 3070
+#define HD_RECEIVEATDATA_ACK (0x35) /* 3070 */
+#define HD_READY_SEND_ATDATA (0x36) /* 3070 */
+#define HD_OPEN_ATCHANNEL_ACK (0x37) /* 3070 */
+#define HD_CLOSE_ATCHANNEL_ACK (0x38) /* 3070 */
+#define HD_DEVICE_INIT_OK (0x11) /* ISurf USB + 3070 */
+#define HD_OPEN_B1CHANNEL_ACK (0x51) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL_ACK (0x52) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL_ACK (0x53) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL_ACK (0x54) /* ISurf USB + 3070 */
+#define HD_SUSPEND_END (0x61) /* ISurf USB */
+#define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) /* ISurf USB + 3070 */
+
+/* control requests */
+#define HD_OPEN_B1CHANNEL (0x23) /* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL (0x24) /* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL (0x25) /* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL (0x26) /* ISurf USB + 3070 */
+#define HD_RESET_INTERRUPT_PIPE (0x27) /* ISurf USB + 3070 */
+#define HD_DEVICE_INIT_ACK (0x34) /* ISurf USB + 3070 */
+#define HD_WRITE_ATMESSAGE (0x12) /* 3070 */
+#define HD_READ_ATMESSAGE (0x13) /* 3070 */
+#define HD_OPEN_ATCHANNEL (0x28) /* 3070 */
+#define HD_CLOSE_ATCHANNEL (0x29) /* 3070 */
/* number of B channels supported by base driver */
#define BAS_CHANNELS 2
@@ -193,7 +188,9 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define AT_PROTO 4
#define AT_TYPE 5
#define AT_HLC 6
-#define AT_NUM 7
+#define AT_CLIP 7
+/* total number */
+#define AT_NUM 8
/* variables in struct at_state_t */
#define VAR_ZSAU 0
@@ -216,7 +213,6 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define EV_START -110
#define EV_STOP -111
#define EV_IF_LOCK -112
-#define EV_PROTO_L2 -113
#define EV_ACCEPT -114
#define EV_DIAL -115
#define EV_HUP -116
@@ -224,12 +220,11 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define EV_BC_CLOSED -118
/* input state */
-#define INS_command 0x0001
-#define INS_DLE_char 0x0002
+#define INS_command 0x0001 /* receiving messages (not payload data) */
+#define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */
#define INS_byte_stuff 0x0004
#define INS_have_data 0x0008
-#define INS_skip_frame 0x0010
-#define INS_DLE_command 0x0020
+#define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */
#define INS_flag_hunt 0x0040
/* channel state */
@@ -259,6 +254,11 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define SM_LOCKED 0
#define SM_ISDN 1 /* default */
+/* layer 2 protocols (AT^SBPR=...) */
+#define L2_BITSYNC 0
+#define L2_HDLC 1
+#define L2_VOICE 2
+
struct gigaset_ops;
struct gigaset_driver;
@@ -286,8 +286,6 @@ extern struct reply_t gigaset_tab_cid[];
extern struct reply_t gigaset_tab_nocid[];
struct inbuf_t {
- unsigned char *rcvbuf; /* usb-gigaset receive buffer */
- struct bc_state *bcs;
struct cardstate *cs;
int inputstate;
int head, tail;
@@ -359,12 +357,6 @@ struct at_state_t {
struct bc_state *bcs;
};
-struct resp_type_t {
- unsigned char *response;
- int resp_code; /* RSP_XXXX */
- int type; /* RT_XXXX */
-};
-
struct event_t {
int type;
void *ptr, *arg;
@@ -395,7 +387,7 @@ struct bc_state {
unsigned chstate; /* bitmap (CHS_*) */
int ignore;
- unsigned proto2; /* Layer 2 protocol (ISDN_PROTO_L2_*) */
+ unsigned proto2; /* layer 2 protocol (L2_*) */
char *commands[AT_NUM]; /* see AT_XXXX */
#ifdef CONFIG_GIGASET_DEBUG
@@ -410,6 +402,8 @@ struct bc_state {
struct usb_bc_state *usb; /* usb hardware driver (m105) */
struct bas_bc_state *bas; /* usb hardware driver (base) */
} hw;
+
+ void *ap; /* LL application structure */
};
struct cardstate {
@@ -456,12 +450,13 @@ struct cardstate {
unsigned running; /* !=0 if events are handled */
unsigned connected; /* !=0 if hardware is connected */
- unsigned isdn_up; /* !=0 after ISDN_STAT_RUN */
+ unsigned isdn_up; /* !=0 after gigaset_isdn_start() */
unsigned cidmode;
int myid; /* id for communication with LL */
- isdn_if iif;
+ void *iif; /* LL interface structure */
+ unsigned short hw_hdr_len; /* headroom needed in data skbs */
struct reply_t *tabnocid;
struct reply_t *tabcid;
@@ -476,8 +471,8 @@ struct cardstate {
struct timer_list timer;
int retry_count;
- int dle; /* !=0 if modem commands/responses are
- dle encoded */
+ int dle; /* !=0 if DLE mode is active
+ (ZDLE=1 received -- M10x only) */
int cur_at_seq; /* sequence of AT commands being
processed */
int curchannel; /* channel those commands are meant
@@ -616,7 +611,9 @@ struct gigaset_ops {
int (*baud_rate)(struct cardstate *cs, unsigned cflag);
int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
- /* Called from i4l.c to put an skb into the send-queue. */
+ /* Called from LL interface to put an skb into the send-queue.
+ * After sending is completed, gigaset_skb_sent() must be called
+ * with the skb's link layer header preserved. */
int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
@@ -625,7 +622,8 @@ struct gigaset_ops {
};
-/* = Common structures and definitions ======================================= */
+/* = Common structures and definitions =======================================
+ */
/* Parser states for DLE-Event:
* <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
@@ -638,8 +636,7 @@ struct gigaset_ops {
* Functions implemented in asyncdata.c
*/
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
@@ -650,8 +647,7 @@ void gigaset_m10x_input(struct inbuf_t *inbuf);
* Functions implemented in isocdata.c
*/
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
/* Called from ev-layer.c to process a block of data
@@ -674,36 +670,26 @@ void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);
int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
/* ===========================================================================
- * Functions implemented in i4l.c/gigaset.h
+ * Functions implemented in LL interface
*/
-/* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);
+/* Called from common.c for setting up/shutting down with the ISDN subsystem */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregister(struct cardstate *cs);
-/* Called from xxx-gigaset.c to indicate completion of sending an skb */
+/* Called from hardware module to indicate completion of an skb */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_isdn_rcv_err(struct bc_state *bcs);
/* Called from common.c/ev-layer.c to indicate events relevant to the LL */
+void gigaset_isdn_start(struct cardstate *cs);
+void gigaset_isdn_stop(struct cardstate *cs);
int gigaset_isdn_icall(struct at_state_t *at_state);
-int gigaset_isdn_setup_accept(struct at_state_t *at_state);
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);
-
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);
-
-
-static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
- isdn_ctrl response;
-
- /* error -> LL */
- gig_dbg(DEBUG_CMD, "sending L1ERR");
- response.driver = bcs->cs->myid;
- response.command = ISDN_STAT_L1ERR;
- response.arg = bcs->channel;
- response.parm.errcode = ISDN_STAT_L1ERR_RECV;
- bcs->cs->iif.statcallb(&response);
-}
+void gigaset_isdn_connD(struct bc_state *bcs);
+void gigaset_isdn_hupD(struct bc_state *bcs);
+void gigaset_isdn_connB(struct bc_state *bcs);
+void gigaset_isdn_hupB(struct bc_state *bcs);
/* ===========================================================================
* Functions implemented in ev-layer.c
@@ -732,6 +718,7 @@ void gigaset_bcs_reinit(struct bc_state *bcs);
void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
struct cardstate *cs, int cid);
int gigaset_get_channel(struct bc_state *bcs);
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
void gigaset_free_channel(struct bc_state *bcs);
int gigaset_get_channels(struct cardstate *cs);
void gigaset_free_channels(struct cardstate *cs);
@@ -781,7 +768,7 @@ struct event_t *gigaset_add_event(struct cardstate *cs,
void *ptr, int parameter, void *arg);
/* Called on CONFIG1 command from frontend. */
-int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode
+int gigaset_enterconfigmode(struct cardstate *cs);
/* cs->lock must not be locked */
static inline void gigaset_schedule_event(struct cardstate *cs)
@@ -816,35 +803,6 @@ static inline void gigaset_bchannel_up(struct bc_state *bcs)
/* handling routines for sk_buff */
/* ============================= */
-/* pass received skb to LL
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_skb(struct sk_buff *skb,
- struct cardstate *cs,
- struct bc_state *bcs)
-{
- cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
- bcs->trans_down++;
-}
-
-/* handle reception of corrupted skb
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_error(struct sk_buff *procskb,
- struct cardstate *cs,
- struct bc_state *bcs)
-{
- if (procskb)
- dev_kfree_skb(procskb);
-
- if (bcs->ignore)
- --bcs->ignore;
- else {
- ++bcs->corrupted;
- gigaset_isdn_rcv_err(bcs);
- }
-}
-
/* append received bytes to inbuf */
int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
unsigned numbytes);
OpenPOWER on IntegriCloud