summaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse/elantech.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/mouse/elantech.c')
-rw-r--r--drivers/input/mouse/elantech.c48
1 files changed, 41 insertions, 7 deletions
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6ab0eb1a..4bc78892 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1,7 +1,7 @@
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
+ static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
@@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
fingers = (packet[0] & 0xc0) >> 6;
}
+ if (etd->jumpy_cursor) {
+ /* Discard packets that are likely to have bogus coordinates */
+ if (fingers > old_fingers) {
+ elantech_debug("elantech.c: discarding packet\n");
+ goto discard_packet_v1;
+ }
+ }
+
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
@@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
}
input_sync(dev);
+
+ discard_packet_v1:
+ old_fingers = fingers;
}
/*
@@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
rc = -1;
break;
}
+ }
+
+ if (rc == 0) {
/*
- * Read back reg 0x10. The touchpad is probably initalising
- * and not ready until we read back the value we just wrote.
+ * Read back reg 0x10. For hardware version 1 we must make
+ * sure the absolute mode bit is set. For hardware version 2
+ * the touchpad is probably initalising and not ready until
+ * we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
@@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
break;
tries--;
elantech_debug("elantech.c: retrying read (%d).\n",
- tries);
+ tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
- if (rc)
+
+ if (rc) {
pr_err("elantech.c: failed to read back register 0x10.\n");
- break;
+ } else if (etd->hw_version == 1 &&
+ !(val & ETP_R10_ABSOLUTE_MODE)) {
+ pr_err("elantech.c: touchpad refuses "
+ "to switch to absolute mode.\n");
+ rc = -1;
+ }
}
if (rc)
@@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse)
param[0], param[1], param[2]);
etd->capabilities = param[0];
+ /*
+ * This firmware seems to suffer from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+ pr_info("elantech.c: firmware version 2.34 detected, "
+ "enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = 1;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
goto init_fail;
OpenPOWER on IntegriCloud